RENNER SCREW COMPRESSORS THE POWER-SAVING PROFESSIONALS WITH SPEED REGULATION. RSF 4 160 RSKF 4 45 RSDF 4 15 RSDKF 4 15 Made in Germany RS-TF 75 + 90
RENNER SCREW COMPRESSORS QUALITY AND ECONOMY IN ONE CONVINCING PACKAGE. The screw-type compressors in the RSF / RSKF / RSDF / RSDKF and RS-TF series come with frequency control and are designed for heavy-duty industrial applications. They are also fitted with the RENNERtronic intelligent control and monitoring system. ADVANTAGES Two-year full performance warranty Compact air ends eliminating pipework and links with known sources of problems. No need for separate oil tank, no need for TÜV pressure test certificates (up to RSF 45.0). Efficient noise-insulated canopy and multiple antivibration mountings for minimisation of noise and vibration levels when installed. Door panels are easily removed allowing ease of access to the individual components for servicing. Use of standard components made by German brand name manufacturers, maintaining high quality standards and offering flexibility in the event of faults. RENNER FREQUENCY CONTROL Major fluctuations in compressed air requirements cannot be avoided in many factories. Frequencycontrolled are based on the principle that compressed air can still be generated cost-effectively even if requirements vary. The compressor output is adjusted to meet the actual air demand using the infinitely variable electronic speed control, thus guaranteeing maximum possible levels of economy. The frequency converter complete with control unit is integrated in the unit and permanently installed. RENNERtronic control Intelligent control system Increased operational reliability Reduced costs Fully compatible with higher-level compressed air management systems.
For the s sake: t n e m n o r envi d c o n t ro l l e y c n e u q f re o rs! c o m p re s s WITH THE FREQUENCY CONTROL THERE IS A CLEAR REDUCTION IN THE OVERALL COSTS FOR COMPRESSED AIR SUPPLY. WHY FREQUENCY CONTROL? 1. Energy saving: Energy consumption is reduced to a minimum in that demand is tailored to the specific operational requirements. 2. Low-fatigue: Minimised load on wearing parts and system components. Low maintenance costs and longer service life. Soft start elimina ting start-up power peaks. 3. Pressure optimisation: Low discharge pressure made possible by keeping pressure band at a constant 0.2 bar. Reducing the discharge pressure by 1 bar approximates to an 8% reduction in energy consumption. 4. Reduction of discharge losses: No more idle running phases wasting power. 5. Lower power consumption leads to reduction in CO 2 emissions. COMPARISON: TOTAL COSTS AFTER FIVE YEARS. Conventional compressor: The energy costs after five years amount to 78% of the total costs incurred by a conventional compressor. The only way to reduce the overall costs is to minimise the energy costs. RSF compressor: It is possible to save up to 35% on energy costs by using RSF compressor developed by RENNER. This will translate to a 25% saving on overall costs and an improvement in your company s overall energy balance. The additional capital expenditure is very quickly amortised.
RSF 4 160 with frequency control The models in the RSF 4.0 to 160.0 range presented here are based on RENNER s standard RS series. These screw-type compressors are designed for tough industrial applications. High economic efficiency, long service life and simple, cost-effective maintenance were the main criteria targeted in developing these products. All RSF compressors are fitted as standard with the intelligent RENNERtronic control and monitoring system. Technical data RSF 4 160: RSF 4.0 0.17-0.56 6.00-19.78 0.14-0.46 4.94-16.24 0.11-0.35 3.88-12.36 0.09-0.30 3.18-10.59 4.0 5.5 770 x 579 x 907 172 RSF 5.5 0.23-0.77 8.12-27.19 0.20-0.65 7.06-22.95 0.16-0.53 5.65-18.72 0.14-0.45 4.94-15.89 5.5 7.5 770 x 579 x 907 178 RSF 7.5 0.33-1.10 11.65-38.85 0.29-0.95 10.24-33.55 0.22-0.74 7.77-26.13 0.19-0.63 6.71-22.25 7.5 10.0 770 x 579 x 907 199 RSF 1-11.0 0.44-1.45 15.54-51.21 0.33-1.10 11.65-38.85 0.27-0.90 9.54-31.78 11.0 15.0 940 x 579 x 907 226 RSF 11.0 0.53-1.76 18.71-62.15 0.45-1.50 15.89-52.97 0.35-1.16 12.36-40.97 0.28-0.93 9.89-32.84 11.0 15.0 998 x 671 x 1123 320 RSF 15.0 0.67-2.24 23.66-79.11 0.59-1.96 20.84-69.22 0.45-1.51 15.89-53.33 0.37-1.24 13.07-43.79 15.0 20.0 998 x 671 x 1123 335 RSF 18.5 0.87-2.91 30.72-102.77 0.79-2.62 27.90-92.53 0.66-2.20 23.30-77.69 0.57-1.89 20.13-66.75 18.5 25.0 1287 x 799 x 1296 561 RSF 22.0 1.04-3.46 36.73-122.19 0.93-3.10 32.84-109.48 0.80-2.66 28.25-93.94 0.69-2.31 24.37-81.58 22.0 30.0 1287 x 799 x 1296 576 RSF1-30.0 1.31-4.38 46.26-154.68 1.20-4.01 42.38-141.61 1.06-3.52 37.43-124.31 0.91-3.02 32.14-106.65 30.0 40.0 1384 x 799 x 1296 648 RSF 2-30.0 1.52-5.05 53.68-178.34 1.28-4.28 45.20-151.15 1.13-3.76 39.91-132.78 1.02-3.40 36.02-120.07 30.0 40.0 1548 x 939 x 1580 850 RSF 37.0 1.85-6.15 65.33-217.19 1.57-5.24 55.44-185.05 1.37-4.56 48.38-161.04 1.25-4.15 44.14-146.56 37.0 50.0 1548 x 939 x 1580 874 RSF 45.0 2.18-7.25 76.99-256.03 1.95-6.51 68.86-229.90 1.67-5.55 58.98-196.00 1.51-5.03 53.33-177.63 45.0 60.0 1548 x 939 x 1580 991 RSF 55.0 2.79-9.30 98.53-328.43 2.39-7.96 84.40-281.10 2.01-6.70 70.98-236.61 1.76-5.87 62.15-207.30 55.0 75.0 1556 x 1103 x 1623 1163 RSF 75.0 3.63-12.10 128.19-427.31 3.11-10.35 109.83-365.51 2.76-9.20 97.47-324.89 2.43-8.10 85.81-286.05 75.0 100.0 1654 x 1104 x 1697 1343 RSF1-90.0 4.10-13.65 144.79-482.05 3.66-12.20 129.25-430.84 3.26-10.85 115.13-383.16 2.82-9.40 99.59-331.96 90.0 120.0 2110 x 1356 x 1936 1989 RSF2-90.0 4.67-15.55 164.92-549.14 4.11-13.70 145.14-483.81 3.65-12.15 128.90-429.07 3.18-10.60 112.30-374.34 90.0 120.0 2110 x 1356 x 1936 2063 RSF 110.0 5.55-18.50 196.00-653.32 4.77-15.90 168.45-561.50 110.0 150.0 2587 x 1652 x 1993 2920 RSF 132.0 7.04-23.45 248.62-828.13 6.12-20.40 216.13-720.42 132.0 175.0 2587 x 1652 x 1993 3281 RSF 160.0 8.37-27.90 295.58-985.28 7.46-24.85 263.45-877.57 160.0 215.0 2587 x 1652 x 1993 3350 We reserve the right to make technical modifications.
RSKF 4 15 with attached refrigeration dryer and frequency control The RSF models are fitted as standard with the intelligent RENNERtronic control and monitoring system. This optimises their economy of operation and guarantees the necessary safety and reliability in terms of maintaining and servicing the units. They are compatible with higher-level compressed air management systems. The RSKF prefix indicates a self-contained compressed air station. No additional outlay required to fit frequency converter and refrigeration dryer. Simply plug in and connect to the pressure system and your RENNER compressor will be a reliable and economic source of compressed air. RSKF 18.5 45 with attached refrigeration dryer and frequency control Technical data RSKF 4 45: RSKF 4.0 0.17-0.56 6.00-19.78 0.14-0.46 4.94-16.24 0.11-0.35 3.88-12.36 0.09-0.30 3.18-10.59 4.0 5.5 1080x 579 x 907 198 RSKF 5.5 0.23-0.77 8.12-27.19 0.20-0.65 7.06-22.95 0.16-0.53 5.65-18.72 0.14-0.45 4.94.15.89 5.5 7.5 1080x 579 x 907 218 RSKF 7.5 0.33-1.10 11.65-38.85 0.28-0.95 10.24-33.55 0.22-0.74 7.77-26.13 0.19-0.63 6.71-22.35 7.5 10.0 1080x 579 x 907 240 RSKF 1-11.0 0.44-1.45 15.54-51.21 0.33-1.10 11.65-38.85 0.27-0.90 9.53-31.78 11.0 15.0 1250x 579 x 907 226 RSKF 11.0 0.53-1.76 18.72-62.15 0.45-1.50 15.89-52.97 0.35-1.16 12.36-40.97 0.28-0.93 9.89-32.84 11.0 15.0 1308 x 671 x 1123 368 RSKF 15.0 0.67-2.24 23.66-79.10 0.59-1.96 20.84-69.22 0.45-1.51 15.89-53.33 0.37-1.24 13.07-43.79 15.0 20.0 1308 x 671 x 1123 385 RSKF 18.5 0.87-2.91 30.72-102.77 0.79-2.62 27.90-92.52 0.66-2.20 23.31-77.69 0.57-1.89 20.13-66.74 18.5 25.0 1739 x 799 x 1296 628 RSKF 22.0 1.04-3.46 36.73-122.19 0.93-3.10 32.84-109.48 0.80-2.66 28.25-93.94 0.69-2.31 24.37-81.58 22.0 30.0 1739 x 799 x 1296 647 RSKF 1-30.0 1.31-4.38 46.26-154.68 1.20-4.01 42.38-141.61 1.06-3.52 37.43-124.31 0.91-3.02 32.14-106.6 30.0 40.0 1839 x 799 x 1296 716 RSKF 2-30.0 1.52-5.05 53.68-178.34 1.28-4.28 45.20-151.15 1.13-3.76 39.91-132.78 1.02-3.40 36.01-120.07 30.0 40.0 2000 x 939 x 1580 934 RSKF 37.0 1.85-6.15 65.33-217.19 1.57-5.24 55.44-185.05 1.37-4.56 48.38-161.03 1.25-4.15 44.14-146.56 37.0 50.0 2000 x 939 x 1580 959 RSKF 45.0 2.18-7.25 76.99-256.03 1.95-6.51 68.86-229.90 1.67-5.55 58.98-196.00 1.51-5.03 53.33-177.63 45.0 60.0 2000 x 939 x 1580 1081 We reserve the right to make technical modifications.
Technical data RSDKF 4 15: RSDF 4 15 mounted on pressure tank with frequency control Standard tank sizes: RSDF 4.0 1-11.0: 250 litres, RSDF 11.0 15.0: 500 litres. The tank sizes vary and are designed for normal operating conditions. Other sizes available on request. Technical data RSDF 4 15: RSDF 4.0 0.17-0.56 6.00-19.78 0.14-0.46 4.94-16.24 0.11-0.35 3.88-12.36 0.09-0.30 3.18-10.59 4.0 5.5 1410 x 579 x 1442 252 RSDF 5.5 0.23-0.77 8.12-27.19 0.20-0.65 7.06-22.95 0.16-0.53 5.65-18.72 0.14-0.45 4.94-15.89 5.5 7.5 1410 x 579 x 1442 266 RSDF 7.5 0.33-1.10 11.65-38.85 0.29-0.95 10.24-33.55 0.22-0.74 7.77-26.13 0.19-0.63 6.71-22.25 7.5 10.0 1410 x 579 x 1442 273 RSDF 1-11.0 0.44-1.45 15.54-51.21 0.33-1.10 11.65-38.85 0.27-0.90 9.54-31.78 11.0 15.0 1410 x 579 x 1442 297 RSDF 11.0 0.53-1.76 18.72-62.15 0.45-1.50 15.89-52.97 0.35-1.16 12.36-40.97 0.28-0.93 9.89-32.84 11.0 15.0 1810 x 671 x 1763 448 RSDF 15.0 0.67-2.24 23.66-79.10 0.59-1.96 20.84-69.22 0.45-1.51 15.89-53.33 0.37-1.24 13.07-43.79 15.0 20.0 1810 x 671 x 1763 474 We reserve the right to make technical modifications. RSDKF 4 15 mounted on pressure tank with attached refrigeration dryer and frequency control Standard tank sizes: RSDKF 4.0 1-11.0: 250 litres, RSDKF 11.0 15.0: 500 litres. Other sizes available on request. The compact and self-contained compressed air station, economic on space and on-site installation. RSDKF 4.0 0.17-0.56 6.00-19.78 0.14-0.46 4.94-16.24 0.11-0.35 3.88-12.36 0.09-0.30 3.18-10.59 4.0 5.5 1410 x 579 x 1442 278 RSDKF 5.5 0.23-0.77 8.12-27.19 0.20-0.65 7.16-22.95 0.16-0.53 5.65-18.72 0.14-0.45 4.94-15.89 5.5 7.5 1410 x 579 x 1442 292 RSDKF 7.5 0.33-1.10 11.65-38.85 0.29-0.95 10.24-33.55 0.22-0.74 7.77-26.13 0.19-0.63 6.71-22.25 7.5 10.0 1410 x 579 x 1442 314 RSDKF1-11.0 0.44-1.45 15.54-51.21 0.33-1.10 11.65-38.85 0.27-0.90 9.54-31.78 11.0 15.0 1410 x 579 x 1442 349 RSDKF11.0 0.53-1.76 18.72-62.15 0.45-1.50 15.89-52.97 0.35-1.16 12.36-40.97 0.28-0.93 9.89-32.84 11.0 15.0 1810 x 671 x 1763 496 RSDKF 15.0 0.67-2.24 23.66-79.10 0.59-1.96 20.84-69.22 0.45-1.51 15.89-53.33 0.37-1.24 13.07-43.79 15.0 20.0 1810 x 671 x 1763 524
RS-TF 75 and 90 in tandem design with frequency control and base-load alternation switch The twin power pack! High-end technology in full force. Reliable and economic tandem design screw compressors for higher compressed air requirements. We have kept many seasoned RENNER design features which have stood the test of time, but the basic concept is completely new and geared wholly to operational reliability and cost-effectiveness - in other words, to maximising the benefits for the user. The systems consist of two identical compressor units with their own drive motors and separate coolers, sharing one joint noise-insulated canopy. The RS-TF models are fitted as standard with the intelligent RENNERtronic control and monitoring system. They also feature a basic changeover function between motors and integrated rotational direction control. Including one frequency converter for both motors. Technical data RS-TF 75 and 90: RS-TF 75 1.85-12.30 65.33-434.37 1.57-10.48 55.44-370.10 1.37-9.12 48.38-322.07 1.25-8.30 44.14-293.11 2x37.0 2x50.0 2020 x 1494 x 2083 2015 RS-TF 90 2.18-14.50 76.99-512.70 1.95-13.02 68.86-459.80 1.67-11.10 58.98-392.00 1.51-10.06 53.33-355.27 2x45.0 2x60.0 2020 x 1494 x 2083 2065 RS-TF 110 in preparation RS-TF 132 in preparation RS-TF 160 in preparation We reserve the right to make technical modifications.
RENNER THE EXPERT IN SCREW COMPRESSORS. Set up in 1994, this family-run company employs a highly motivated and successful team specialising in the development and production of such compressor systems. The structure and size of the company bring flexibility in terms of decision-making and speed in terms of practical results, thus enabling new developments to be optimally tailored to the needs of the market. THE RENNER PRODUCT RANGE: We can supply you with the right compressor for any application guaranteed. SCREW COMPRESSORS From 2 355 kw. also for oil-free compressed air of breathable quality Up to 43 bar / oil-free, e.g. for manufacture of PET bottles Supplied as compact units with pressure tank, refrigeration dryer and frequency control Special version with plate heat exchanger save energy and money! Customised models. mobile/portable. built-in units. designed to customer specifications For special applications: gas compression. operation of drilling apparatus, rail and special-purpose vehicles. RENNER local dealer: COMPRESSED AIR ACCESSORIES: Filters. refrigeration dryers. adsorption dryers, condensate drains and disposal systems. Made in Germany RENNER GmbH Kompressoren D-74363 Gueglingen Emil-Weber-Strasse 32 Tel. +49 (0) 71 35 / 93 193-0 Fax +49 (0) 71 35 / 93 193-50 email: info@renner-kompressoren.de www.renner-kompressoren.com Reg.-Nr.: Q10205013 RSF - ENG - 3/ 2009-2