SECTION D INDEX Product Description Page Number Specification Grade Insulated Bushings.....................DA Specification Grade Insulated Grounding Bushings........DA2-DA4 Insulating Bushings & Couplings.......................DA-DA6 Insulating Bushings.....................................DB Insulated Bushings.....................................DB2 Grounding Insulated Bushings........................DB-DB4 Conduit Bushings/Locknuts...........................DB-DB Bonding Wedge Locknuts & Sealing Locknuts................DB8 Reducing Washers.....................................DB9 0 N. Frontage Road Skokie, Illinois 600
Notes 0 N. Frontage Road Skokie, Illinois 600
DA O-Z Specification Bushings Specification Grade Insulated Bushings For Rigid Metal Conduit, IMC & EMT DA Types B, HB, AB, RB, SB, SBT To protect insulated conductors from abrasion during pulling and from mechanical vibration. To provide voltage gradient between live conductors and ground at point of electrical and mechanical stress on conductor insulation. Type B Type SB Molded-on high impact phenolic thermosetting insulation UL insulation temperature rating 0 C Positive metallic conduit stop For threaded rigid and IMC Type B: Malleable Iron or Steel/Zinc Plated Type HB: Malleable Iron or Steel Mechanical/Hot Dip Galvanized Type AB: Aluminum Bushing Type RB: Bronze, for highly corrosive atmospheres For threadless rigid and IMC Type SB: Malleable Iron or Steel/Zinc Plated For EMT Type SBT: Malleable Iron or Steel/Zinc Plated Options: Type B insulated bushings are also available for threadless rigid and IMC in the following materials: Type HSB:Malleable Iron or Steel Mechanical/Hot Dip Galvanized Type ASB: Aluminum Type RSB: Bronze UL Listed: E-8 CSA Certified: 84 UL Standard: 4B CSA Standard: C22.2 No. 8 NEMA: FB- Threaded for Rigid Conduit Threadless Rigid & IMC EMT Catalog Numbers Catalog Numbers Catalog Numbers Trade Hot Dip/ Copper Malleable Iron Malleable Iron Size Zinc Mechanical Free or Steel/ or Steel/ (inches) Plated Galvanized Aluminum Bronze Zinc Plated Zinc Plated B-0 - HB-0 AB-0 RB-0 SB-0 SBT-0 B- HB- AB- RB- SB- SBT- B-00 HB-00 AB-00 RB-00 SB-00 SBT-00 B-2 HB-2 AB-2 RB-2 SB-2 SBT-2 B-0 HB-0 AB-0 RB-0 SB-0 SBT-0 2 B-200 HB-200 AB-200 RB-200 SB-200 SBT-200 2 B-20 HB-20 AB-20 RB-20 SB-20 SB-20 B-00 HB-00 AB-00 RB-00 SB-00 SB-00 B-0 HB-0 AB-0 RB-0B SB-0 SB-0 4 B-400 HB-400 AB-400 RB-400 SB-400 SB-400 B-00 HB-00 AB-00 RB-00 SB-00 6 B-600 HB-600 AB-600 HB-600 SB-600 Note: A Mechanically Galvanized finish provides a plating thickness equivalent to Hot-Dip process, meeting ASTM A- performance criteria. Unlike the Hot-Dip process, mechanical galvanizing provides plating on all machined and/or threaded surfaces. 2 Caps to prevent entry of foreign matter into conduit prior to pulling cables are available. See Type PPC on page DB. Suggested Specification: O-Z/Gedney Type B insulated bushings of malleable iron or steel, with conduit end stop and integrally molded noncombustible phenolic insulated surfaces rated 0 C shall be used on the ends of all raceways containing No. 4 or larger conductors. Trade Dimensions in Inches Size Max. Overall (inches) Dia. Height 2 2 2 2 2 4 4 4 6 6 0 N. Frontage Road Skokie, Illinois 600
DA2 O-Z Specification Bushings DA2 Specification Grade Insulated Grounding Bushings For Rigid Metal Conduit & IMC Type BLG & Type HBLG Copper Plus Lay-In-Lug To provide a compact means of grounding conduit through an Insulated Bushing. To protect insulated conductors from abrasion during pulling and mechanical vibration. To provide voltage gradient between line conductors and ground at point of electrical and mechanical stress on conductor insulation. Tin plated copper saddle for use with copper or aluminum conductors through 4/0. Allows easy insertion of grounding conductor for thru or end connection. Low grounding connector profile. Spring action design maintains positive firm contact on grounding conductor. Set screw provides fixed alignment and positive ground continuity. Phenolic insulation, with 0 C U.L. rating, molded on over metallic conduit stop will not shatter or shrink at sub-zero temperatures. Lugs not sold separately. Type BLG: Malleable Iron or Steel, Zinc Plated Type HBLG: Malleable Iron or Steel, Mechanically/Hot Dip Galvanized with Stainless Steel screws. Options: Type BLG grounding bushings are also available for use on threadless conduit in Malleable Iron/Hot Dip Mechanically Galvanized - Specify Type HSBLG. Contact your local representative for pricing and availability. UL Listed E-24264 CSA Certified:98 UL Standard: 4B, 46 CSA Standard: C22.2 No. 4 NEMA: FB- Suggested Specifications: O-Z/Gedney Type BLG insulated Lay-in-Lug grounding bushings with tin-plated copper grounding path shall be used on all feeder raceways and bushings shall have integrally molded noncombustible insulated surfaces rated 0 C. Notes: A Mechanically Galvanized finish provides a plating thickness equivalent to Hot-Dip process, meeting ASTM A- performance criteria. Unlike the Hot-Dip process, mechanical galvanizing provides plating on all machined and/or threaded surfaces. 2 Caps to prevent entry of foreign matter into conduit prior to pulling cables are available. See Type PPC on Page DB. PATENTED Hot Dip/ Zinc Mechanical Dimensions in Inches Plated Galvanized Max. Turning Trade Size Catalog Catalog Grounding Wire Size* Dia. Max. Radius (inches) Number Number Min. Max. without lug Ht. with lug BLG-004 HBLG-004 4 4 BLG-022 HBLG--022 8 2/0 BLG-004 HBLG-004 4 4 BLG-022 HBLG-022 8 2/0 BLG-04 HBLG-04 4 4 BLG-22 HBLG-22 8 2/0 BLG-204 HBLG-204 4 4 2 BLG-222 HBLG-222 8 2/0 2 BLG-04 HBLG-04 4 4 2 BLG-22 HBLG-22 8 2/0 2 2 BLG-2004 HBLG-2004 4 4 2 2 BLG-2022 HBLG-2022 8 2/0 2 Type BLG 2 2 2 BLG-2604 HBLG-2604 4 4 2 2 BLG-2622 HBLG-2622 8 2/0 2 2 BLG-2624 HBLG-2624 6 4/0 2 2 BLG-260 HBLG-260 20 00 6 BLG-04 HBLG-04 4 4 4 2 BLG-22 HBLG-22 8 2/0 4 2 BLG-24 HBLG-24 6 4/0 4 BLG-0 HBLG-0 20 00 4 BLG-604 HBLG-604 4 4 4 2 BLG-622 HBLG-622 8 2/0 4 BLG-624 HBLG-624 6 4/0 4 BLG-60 HBLG-60 20 00 4 4 4 BLG-404 HBLG-404 4 4 4 BLG-422 HBLG-422 8 2/0 4 BLG-424 HBLG-424 6 4/0 4 BLG-40 HBLG-40 20 00 4 BLG-04 HBLG-04 4 4 6 BLG-22 HBLG-22 8 2/0 6 4 BLG-24 HBLG-24 6 4/0 6 4 BLG-0 HBLG-0 20 00 6 6 BLG-604 HBLG-604 4 4 4 6 BLG-622 HBLG-622 8 2/0 4 6 BLG-624 HBLG-624 6 4/0 4 6 BLG-60 HBLG-60 20 00 6 *Solid or stranded for No. 4 awg or smaller; stranded for No. 2 or larger. Copper conductor only for #4-4 lug and 20-00 mcm lug. 0 N. Frontage Road Skokie, Illinois 600
DA O-Z Specification Bushings DA Specification Grade Insulated Grounding Bushings For Threaded Rigid Conduit & IMC Type ABLG & Type RBLG Copper Plus Lay-In-Lug To provide a compact means of grounding conduit through an Insulated Bushing. To protect insulated conductors from abrasion during pulling and mechanical vibration. To provide voltage gradient between line conductors and ground at point of electrical and mechanical stress on conductor insulation. Tin plated copper saddle for use with copper or aluminum conductors through 4/0. Allows easy insertion of grounding conductor for thru or end connection. Low grounding connector profile. Spring action design maintains positive firm contact on grounding conductor. Set screw provides fixed alignment and positive ground continuity. Phenolic insulation, with 0 C U.L. rating, molded on over metallic conduit stop will not shatter or shrink at sub-zero temperatures. Lugs not sold separately. Type ABLG Aluminum Bushing Type RBLG Bronze Bushing Options: Type ABLG grounding bushings are also available for threadless conduit in bronze and/or aluminum. Specify: Type RSBLG for bronze bushings or Type ASBLG for aluminum bushings. Contact your local representative for pricing and availability. UL Listed: E-24264 CSA Certified: 98 UL Standard: 4B, 46 CSA Standard: C22.2 No. 4 NEMA: FB- Suggested Specifications: O-Z/Gedney Type BLG insulated Lay-in-Lug grounding bushings with tin-plated copper grounding path shall be used on all feeder raceways and bushings shall have integrally molded noncombustible insulated surfaces rated 0 C. Notes: Caps to prevent entry of foreign matter into conduit prior to pulling cables are available. See Type PPC on Page DB. PATENTED Copper Free Dimensions in Inches Aluminum Bronze Max. Turning Trade Size Catalog Catalog Grounding Wire Size* Dia. Max. Radius (inches) Number Number Min. Max. without lug Ht. with lug ABLG-004 RBLG-004 4 4 ABLG-022 RBLG-022 8 2/0 ABLG-004 RBLG-004 4 4 ABLG-022 RBLG-022 8 2/0 ABLG-04 RBLG-04 4 4 ABLG-22 RBLG-22 8 2/0 ABLG-204 RBLG-204 4 4 2 ABLG-222 RBLG-222 8 2/0 2 ABLG-04 RBLG-04 4 4 2 ABLG-22 RBLG-22 8 2/0 2 2 ABLG-2004 RBLG-2004 4 4 2 2 ABLG-2022 RBLG-2022 8 2/0 2 Type ABLG 2 2 2 ABLG-2604 RBLG-2604 4 4 2 2 ABLG-2622 RBLG-2622 8 2/0 2 2 ABLG-2624 RBLG-2624 6 4/0 2 2 -- RBLG-260 20 00 6 ABLG-04 RBLG-04 4 4 4 2 ABLG-22 RBLG-22 8 2/0 4 2 ABLG-24 RBLG-24 6 4/0 4 -- RBLG-0 20 00 4 ABLG-604 RBLG-604 4 4 4 2 ABLG-622 RBLG-622 8 2/0 4 ABLG-624 RBLG624 6 4/0 4 -- RBLG-60 20 00 4 4 4 ABLG-404 RBLG-404 4 4 4 ABLG-422 RBLG-422 8 2/0 4 ABLG-424 RBLG-424 6 4/0 4 -- RBLG-40 20 00 4 ABLG-04 RBLG-04 4 4 6 ABLG-22 RBLG-22 8 2/0 6 4 ABLG-24 RBLG-24 6 4/0 6 4 -- RBLG-0 20 00 6 6 ABLG-604 RBLG-604 4 4 4 6 ABLG-622 RBLG-622 8 2/0 4 6 ABLG-624 RBLG-624 6 4/0 4 6 -- RBLG-60 20 00 6 *Solid or stranded for No. 4 awg or smaller; stranded for No. 2 or larger. Copper conductor only for #4-4 lug and 20-00 mcm lug. 0 N. Frontage Road Skokie, Illinois 600
DA4 O-Z Specification Bushings DA4 Specification Grade Insulated Grounding Bushings For Threadless Rigid Conduit & IMC Type SBLG Copper Plus Lay-In-Lug Provides a compact means of grounding conduit through an insulated bushing. Protects insulated conductors from abrasion during pulling and mechanical vibration. Provides voltage gradient between line conductors and ground at point of electrical and mechanical stress on conductor insulation. Tin plated copper saddle for use with copper or aluminum conductors. Allows easy insertion of grounding conductor for thru or end connection. Low grounding connector profile. Spring action design maintains positive firm contact on grounding conductor. Set screw provides fixed alignment and positive ground continuity. Phenolic insulation, with 0 C UL rating, molded on over metallic conduit stop will not shatter or shrink at sub-zero temperatures. Lugs not sold separately. Bushings - Malleable Iron or Steel/Zinc Plated Grounding Saddle - Tin Plated Copper Clamping Tension Body - Stainless Steel UL Listed: E-24264 CSA Certified: 98 UL Standard: 4B, 46 CSA Standard: C22.2 No. 4 NEMA: FB- Suggested Specifications: O-Z/Gedney Type SBLG insulated Lay-in-Lug grounding bushings with tin-plated copper grounding path shall be used on all feeder raceways and conduits entering enclosures. The bushings shall have integrally molded non combustible insulated surfaces rated 0 C. Notes: A Mechanically Galvanized finish is available that will provide plating thickness equivalent to Hot-Dip process, meeting ASTM A- performance criteria. Unlike the Hot-Dip process, mechanical galvanizing provides plating on all machined and/or threaded surfaces. 2 Caps to prevent entry of foreign matter into conduit prior to pulling cables are available. See Type PPC on page DB. PATENTED Threadless Rigid Dimensions in Inches and IMC Max. Turning Trade Size Catalog Grounding Wire Size* Dia. Max. Radius (inches) Number Min. Max. without lug Ht. with lug SBLG-004 4 4 SBLG-022 8 2/0 SBLG-004 4 4 SBLG-022 8 2/0 SBLG-04 4 4 SBLG-22 8 2/0 SBLG-204 4 4 2 SBLG-222 8 2/0 2 SBLG-04 4 4 2 SBLG-22 8 2/0 2 2 SBLG-2004 4 4 2 2 SBLG-2022 8 2/0 2 Type SBLG 2 2 2 SBLG-2604 4 4 2 2 SBLG-2622 8 2/0 2 2 SBLG-2624 6 4/0 2 SBLG-04 4 4 4 2 SBLG-22 8 2/0 4 2 SBLG-24 6 4/0 4 SBLG-604 4 4 4 2 SBLG-622 8 2/0 4 SBLG-624 6 4/0 4 4 SBLG-404 4 4 4 SBLG-422 8 2/0 4 SBLG-424 6 4/0 SBLG-04 4 4 6 SBLG-22 8 2/0 6 4 SBLG-24 6 4/0 6 4 6 SBLG-604 4 4 4 6 SBLG-622 8 2/0 4 6 SBLG-624 6 4/0 4 *Solid or stranded for No. 4 awg or smaller; stranded for No. 2 or larger. Copper conductor only for #4-4 lug. 0 N. Frontage Road Skokie, Illinois 600
DA Insulating Bushings For Threaded Rigid Conduit & IMC O-Z Specification Bushings DA High impact thermosetting phenolic bushings, with at 0 C UL temperature rating, that will not soften, melt or burn. Type A To insulate end of threaded rigid and IMC UL Listed: E-8 CSA Certified: 84 Type A Trade Type A Dimensions in Inches Size Catalog Outside Overall (inches) Number Dia. Height A-0 Type BB Trade Type BB Dimensions in Inches Size Catalog Outside Bushing Hole Thread (inches) Number Dia. Dia. Length BB-0 Type BB To insulate cables passing through metal boxes or troughs UL Listed: E-209 Type BBL CSA Certified:84 Type BB provided with a locknut A- A-00 A-2 2 A-0 2 2 A-200 2 2 A-20 A-00 4 A-0 4 4 A-400 A-00 6 6 A-600 Dimensions in Inches Trade Type BBL Bushing Locknut Size Catalog Outside Hole Thread Max (inches) Number Dia. Dia. Length Dia. BBL-0 BBL- BB- BB-00 BB-2 2 BB-0 2 2 BB-200 2 2 2 BB-20 2 BB-00 4 BB-0 4 4 BB-400 BB-00 6 4 6 BB-600 UL Listed: E-209 Type ABB CSA Certified: 84 A combination of Type A and BB Bushings. For insulating cables passing through metal boxes or troughs UL Listed: E-209 CSA Certified: 84 UL Standard: 4B CSA Standard: C22.2 No. 8 NEMA: FB- BBL-00 BBL-2 2 2 BBL-0 2 2 2 BBL-200 2 2 2 BBL-20 2 BBL-00 4 4 BBL-0 4 4 BBL-400 BBL-00 6 4 6 6 BBL-600 8 Dimensions in Inches Trade Type ABB Shd. Ht. Max. Size Catalog Outside Hole Thread Type Type Encl. (inches) Number Dia. Dia. Length BB A Thick ABB-0 ABB- ABB-00 ABB-2 2 ABB-0 2 2 ABB-200 2 2 2 ABB-20 2 ABB-00 4 ABB-0 4 4 ABB-400 ABB-00 6 4 6 ABB-600 Type BBL Existing Enclosure Type ABB 0 N. Frontage Road Skokie, Illinois 600
DA6 Phenolic Insulating Couplings For Threaded Rigid Conduit & IMC O-Z Specification Bushings DA6 Type ICC Will not melt, soften or burn Temperature rating 0 C Dielectric strength of 220 V/mil. An insulating coupling having a substantial center shoulder, which prevents butting of the conduits, to assure a definite break in the metallic path. The Type ICC is recommended for use where high strength or resistance to moisture or acid conditions is required. Material: Canvas base phenolic with tapered (NPT) thread. Dimensions in Inches Trade Size Catalog Max. Overall A (inches) Number Dia. Length Shoulder ICC-0 ICC- 6 ICC-00 ICC-2 2 ICC-0 2 2 2 ICC-200 2 2 2 ICC-20 ICC-00 ICC-0 4 4 ICC-400 /8 ICC-00 6 4 6 ICC-600 4 Type ICC 0 N. Frontage Road Skokie, Illinois 600
DB Insulating Bushings Threaded for Rigid Conduit & IMC Standard Bushings - Standard Locknuts DB Type IB Feature: Temperature rating 0 C Material: Polypropylene UL Listed: E-8 CSA Certified: AP20 UL Standard: 4B CSA Standard: C22.2 No. 8 Trade Size Catalog Dimensions in Inches (inches) Number Max. Dia. Max. Height IB-0 6 IB- 6 IB-00 9 6 6 9 6 IB-2 2 9 6 IB-0 2 9 6 2 IB-200 2 2 IB-20 IB-00 4 6 IB-0 4 4 IB-400 IB-00 6 6 6 IB-600 6 Type IB Type PPC To plug bushings, rigid conduit and IMC. Suitable for use on the following bushings: Type A, B, IBC, BB, IB, BLG, HB, HBLG and 2-series. Material: Polyethylene UL Listing not applicable Trade Size Catalog Dimensions in Inches (inches) Number Max. Dia. Max. Height PPC-0 9 6 PPC- 6 PPC-00 6 PPC-2 PPC-0 2 2 PPC-200 2 2 PPC-20 2 PPC-00 PPC-0 4 4 PPC-400 4 Type PPC 0 N. Frontage Road Skokie, Illinois 600
DB2 Insulated Bushings For Rigid Conduit & IMC Standard Bushings - Standard Locknuts DB2 Type IBC Threaded (NPS) Type IBC-S Threadless Set-Screw UL temperature rating 0 C Insulating liner material is UL V-O Rated (self extinguishing) Plastic insulator is tough. It won t chip, crack, swell or shrink. It resists corrosion, chemicals and temperature extremes. Surface friction is so low that wires can be pulled with virtually no abrasion on the cable insulation. Material/Finish Malleable Iron Body/Zinc Plated Thermoplastic Insulator Trade Size Catalog Dimensions in Inches (inches) Number Max. Dia. Max. Height IBC-0 6 IBC- 6 IBC-00 IBC-2 2 IBC-0 2 6 2 IBC-200 2 6 Dimensions in Inches Trade Max. Turning Size Catalog Dia. Max. Radius (inches) Number without lug Ht. with lug 9 6 6 2 IBC-20 IBC-00 4 6 IBC-0 4 6 4 IBC-400 6 6 IBC-00 6 6 6 6 IBC-600 6 Type IBC UL Listed: E-8 IBC-0S 6 IBC-S 6 IBC-00S 9 6 CSA Certified: LR 99 UL Standard: 4B CSA Standard: C22.2 No. 8 NEMA: FB- IBC-2S 2 IBC-0S 2 6 2 IBC-200S 2 6 6 2 IBC-20S IBC-00S 4 6 2 6 IBC-0S 4 6 2 4 IBC-400S 6 6 2 Type IBC-S 0 N. Frontage Road Skokie, Illinois 600
DB Standard Bushings - Standard Locknuts DB Grounding Insulated Bushings with Aluminum Lug For Rigid Conduit & IMC Type IBC-L-AC Threaded with Aluminum Lay-In Lug Type IBC-LS-AC Set-Screw with Aluminum Lay-In Lug UL temperature rating 0 C Insulating liner material is UL V-O Rated (self extinguishing) The plastic liner is tough. It won t chip, crack, swell or shrink. It resists corrosion, chemicals and temperature extremes. Surface friction is so low that wires can be pulled with virtually no abrasion on the cable insulation. Set-Screw provided with each fitting locks bushing in any desired position. UL Listed for use with copper or aluminum grounding conductors Lugs not sold separately. Material: Body - Malleable Iron Lug - Aluminum Clamping Screw - Steel Set Screws - Steel Finish: Body - Zinc Plated Lug - Tin Plated Clamping Screw - Zinc Plated Set Screws - Zinc Plated UL Listed: E-24264 CSA Certified: LR 99 UL Standard: 46 CSA Standard: C22.2 No. 4 NEMA: FB- Type IBC-L-AC Type IBC-LS-AC Threaded Set Screw Dimensions in Inches Type Type Max. Turning Trade Size Catalog Catalog Grounding Wire Size Dia. Max. Radius (inches) Number Number Min. Max. without lugs Ht. with lugs IBC-0L-4AC IBC-0LS-4AC 4 4 6 IBC-L-4AC IBC-LS-4AC 4 4 6 IBC-00L-4AC IBC-00LS-4AC 4 4 IBC-2L-4AC IBC-2LS-4AC 4 4 2 IBC-2L-20AC IBC-2LS-20AC 4 2/0 2 IBC-0L-4AC IBC-0LS-4AC 4 4 2 6 IBC-0L-20AC IBC-0LS-20AC 4 2/0 2 6 2 IBC-200L-4AC IBC-200LS-4AC 4 4 2 6 2 IBC-200L-20AC IBC-200LS-20AC 4 2/0 2 6 2 IBC-20L-4AC IBC-20LS-4AC 4 4 2 IBC-20L-20AC IBC-20LS-20AC 4 2/0 2 IBC-20L-2AC IBC-20LS-2AC 6 20 6 6 6 9 6 6 6 6 6 2 2 2 2 2 6 IBC-00L-4AC IBC-00LS-4AC 4 4 4 6 6 2 IBC-00L-20AC IBC-00LS-20AC 4 2/0 4 6 6 2 6 IBC-00L-2AC IBC-00LS-2AC 6 20 4 6 6 6 IBC-0L-4AC IBC-0LS-4AC 4 4 4 2 IBC-0L-20AC IBC-0LS-20AC 4 2/0 4 6 IBC-0L-2AC IBC-0LS-2AC 6 20 4 4 IBC-400L-4AC IBC-400LS-4AC 4 4 6 6 4 IBC-400L-20AC IBC-400LS-20AC 4 2/0 6 6 4 IBC-400L-2AC IBC-400LS-2AC 6 20 6 6 6 IBC-00L-4AC 4 4 6 6 IBC-00L-20AC 4 2/0 6 6 IBC-00L-2AC 6 20 6 6 4 6 6 IBC-600L-4AC 4 4 6 4 6 IBC-600L-20AC 4 2/0 6 4 6 6 IBC-600L-2AC 6 20 6 4 0 N. Frontage Road Skokie, Illinois 600
DB4 Standard Bushings - Standard Locknuts DB4 Grounding Insulated Bushings with Bronze Lug For Rigid Conduit & IMC Type IBC-L-BC Threaded with Bronze Lay-In Lug Threaded (NPS) Type IBC-LS-BC Set-Screw with Bronze Lay-In Lug Threadless UL temperature rating 0 C Insulating liner material is UL V-O Rated (self extinguishing) The plastic liner is tough. It won t chip, crack, swell or shrink. It resists corrosion, chemicals and temperature extremes. Surface friction is so low that wires can be pulled with virtually no abrasion on the cable insulation. Set-screw provided with each fitting locks bushing in any desired position. UL Listed for use with copper grounding conductors only. Lugs not sold separately. Material: Body - Malleable Iron Lug - Bronze Clamping Screw - Steel Set Screws - Steel Finish: Body - Zinc Plated Lug - Bright Dip Clamping Screw - Zinc Plated Set Screws - Zinc Plated UL Listed: E-24264 CSA Certified: LR 99 UL Standard: 46 CSA Standard: C22.2 No. 4 NEMA: FB- Type IBC-L-BC Type IBC-LS-BC Threaded Set Screw Dimensions in Inches Type Type Max. Turning Trade Size Catalog Catalog Grounding Wire Size Dia. Max. Radius (inches) Number Number Min. Max. without lugs Ht. with lugs IBC-0L-4BC IBC-0LS-4BC 4 4 6 IBC-L-4BC IBC-LS-4BC 4 4 6 IBC-00L-4BC IBC-00LS-4BC 4 4 IBC-2L-4BC IBC-2LS-4BC 4 4 2 IBC-2L-20BC IBC-2LS-20BC 8 2/0 2 IBC-0L-4BC IBC-0LS-4BC 4 4 2 6 IBC-0L-20BC IBC-0LS-20BC 4 2/0 2 6 2 IBC-200L-4BC IBC-200LS-4BC 4 4 2 6 2 IBC-200L-20BC IBC-200LS-20BC 4 2/0 2 6 2 IBC-20L-4BC IBC-20LS-4BC 4 4 2 IBC-20L-20BC IBC-20LS-20BC 4 2/0 2 IBC-20L-2BC IBC-20LS-2BC 6 20 6 6 6 9 6 6 6 6 6 2 2 2 2 2 6 IBC-00L-4BC IBC-00LS-4BC 4 4 4 6 6 2 IBC-00L-20BC IBC-00LS-20BC 4 2/0 4 6 6 2 6 IBC-00L-2BC IBC-00LS-2BC 6 20 4 6 6 6 IBC-0L-4BC IBC-0LS-4BC 4 4 4 2 IBC-0L-20BC IBC-0LS-20BC 4 2/0 4 6 IBC-0L-2BC IBC-0LS-2BC 6 20 4 4 IBC-400L-4BC IBC-400LS-4BC 4 4 6 6 4 IBC-400L-20BC IBC-400LS-20BC 4 2/0 6 6 4 IBC-400L-2BC IBC-400LS-2BC 6 20 6 6 6 IBC-00L-4BC 4 4 6 6 IBC-00L-20BC 4 2/0 6 6 IBC-00L-2BC 6 20 6 6 4 6 6 IBC-600L-4BC 4 4 6 4 6 IBC-600L-20BC 4 2/0 6 4 6 6 IBC-600L-2BC 6 20 6 4 0 N. Frontage Road Skokie, Illinois 600
DB Standard Bushings - Standard Locknuts Malleable Iron Conduit Bushings Threaded (NPS) For Rigid Conduit & IMC DB Type 2 Malleable Iron/Zinc Plated Trade Size Catalog Dimensions in Inches (inches) Number Max. Dia. Height *2-8 6 6 2-0 Optional Finish: Mechanically Galvanized Contact your local representative for pricing and availability. UL Listed: E-8 CSA Certified: 99 UL Standard: 4B CSA Standard: C22.2 No. 8 NEMA: FB- 2-2-00 9 6 6 2-2 2 2-0 2 2 2-200 2 2 2-20 6 2-00 6 6 2-0 4 6 6 4 2-400 4 6 6 2-00 6 6 6 2-600 6 *U.L. Listing not applicable Type 2 Type Capped Bushings Bushings are supplied with plastic insert cap. Malleable Iron/Zinc Plated Optional Finish: Mechanically Galvanized Contact your local representative for pricing and availability. UL Listed: E-8 Trade Size Catalog Dimensions in Inches (inches) Number Max. Dia. Height -0-6 -00 9 6-2 2-0 2 2-200 2 6 2-20 2-00 6 6-0 6 6 4-400 4 6 6-00 6 6-600 Type CSA Certified: 99 UL Standard: 4B CSA Standard: C22.2 No. 8 NEMA: FB- 0 N. Frontage Road Skokie, Illinois 600
DB6 Standard Conduit Locknuts Threaded For Rigid Conduit & IMC Standard Bushings - Standard Locknuts DB6 Type Conduit Locknut Material: through 6 - Heavy Stock Steel Dia. Trade Size Catalog Threads Across (inches) Number Per Inch Thickness Flats -8S* 8-0S 4 6 -S 4 6 Finish: Zinc Plated Optional Finish: Mechanically Galvanized Contact your local representative for pricing and availability. UL Listed: E-8 CSA Certified: AP20 & LR99-00S -2S -0S 2-200S 6 6 2 64 6 2 6 2 2-20 8 9 6-00 8 4-0 8 4 6 4-400 8 9 6-00 8 6 6 6-600 8 6 *Hex Style UL Standard: 4B CSA Standard: C22.2 No. 8 ; NEMA: FB- Material: Aluminum UL Listed: E-8 CSA Certified: 99 & 649 UL Standard: 4B CSA Standard: C22.2 No. 8 NEMA: FB- Dia. Trade Size Catalog Threads Across (inches) Number Per Inch Thickness Flats -0A 4 -A 4 6 6-00A -2A -0A 2-200A 6 6 6 9 6 2 9 6 6 2-20A 8 9 6-00A 8 4-0A 8 4 6 4-400A 8 6-00A 8 6 6 6-600A 8 6 Type 0 N. Frontage Road Skokie, Illinois 600
DB Standard Bushings - Standard Locknuts Conduit Locknuts & Fixture Nuts Threaded For Rigid Conduit & IMC DB Type -8LOS Oversize Locknut covers KO Steel/Zinc Plated Dimensions in Inches Trade Threads Dia. Dia. Size Catalog K.O. Per Across Across (inches) Number Size Inch Thkns. Corners Flats -8LOS & 8 6 Type -8LOS Type -8S Fixture Nuts Steel/Zinc Plated Dimensions in Inches Threads Dia. Dia. Trade Size Catalog K.O. Per Across Across (inches) Number Size Inch Thkns Corners Flats -8S -- 2-2S -- 8 9 6 6 Type -8S 0 N. Frontage Road Skokie, Illinois 600
DB8 Standard Bushings - Standard Locknuts DB8 Standard Conduit Locknuts & Sealing Locknuts Threaded For Rigid Conduit & IMC Type 0 Bonding Wedge Locknut Use with bushings to bond through 6 rigid conduit and IMC to boxes, cabinets or other enclosures where locknut is exposed. Malleable Iron/Zinc Plated UL Listed: E-24264 CSA Certified: 99 UL Standard: 46 CSA Standard: C22.2 No. 4 NEMA: FB- Trade Size Catalog Max. (inches) Number Dia. Thkns Radius 0 6 02 0 6 04 2 6 0 2 2 06 2 2 0 08 4 09 4 6 6 6 6 6 6 6 6 2 6 2 4 0 6 6 2 2* 6 6 * 8 6 4 6 *Not CSA Certified Type 0 Type SLG Sealing Locknut Trade Size Catalog Threads Max. (inches) Number Per Inch Diameter Thickness Supplied with integrally fused gasket Provides raintight or oil tight seal SLG-0S 4 SLG-S 4 SLG-00S SLG-2S 2 6 6 6 6 Steel/Zinc-Plated UL Listed: E-8 SLG-0S 2 2 SLG-200S 2 2 SLG-20S 8 6 SLG-00S 8 4 SLG-0S 8 4 4 SLG-400S 8 6 6 Type SLG CSA Certified: AP20 Not certified UL or CSA UL Standard: 4B CSA Standard: C22.2 No. 8 NEMA: FB- 0 N. Frontage Road Skokie, Illinois 600
DB9 Reducing Washers Standard Bushings - Standard Locknuts DB9 Type RW Steel/Zinc Pre-Galvanized UL Listed: E8 CSA Certified: AP20 UL Standard: 4B CSA Standard: C22.2 No. 8 NEMA: FB- Note: Two reducing washers are required for each knockout. Trade Size Catalog Dimensions in Inches (inches) Number A B x RW-2S 0.88.44 x RW-S 0.88. x RW-4S.. x RW-S 0.88 2.9 x RW-6S. 2.9 x RW-S. 2.9 x RW-8S 0.88 2.0 x RW-9S. 2.0 x RW-0S. 2.0 x RW-S. 2.0 2x RW-2S 0.88.00 2 x RW-S..00 2 x RW-4S..00 2 x RW-S..00 2 x RW-6S.98.00 2 x RW-S 0.88.0 2 x RW-8S..0 2 x RW-9S..0 2 x RW-20S..0 2 x RW-2S.98.0 2 x 2 RW-22S 2.4.0 x RW-2S. 4. x RW-26S. 4. x RW-2S.98 4. x 2 RW-28S 2.4 4. x 2 RW-29S 2.9 4. x RW-4S.98 4.6 x 2 RW-S 2.4 4.6 x 2 RW-6S 2.9 4.6 x RW-S.9 4.6 4 x 2 RW-4S 2.0. 4 x 2 RW-44S 2.9. 4 x RW-4S.9. 4 x RW-46S 4.. Type RW Not UL Listed or CSA Certified. 0 N. Frontage Road Skokie, Illinois 600
DB0 Notes DB0 0 N. Frontage Road Skokie, Illinois 600