BIESTEBROEKKAAI 300 QUAI DE BIESTEBROECK 300 1070 BRUSSELS BELGIUM +32 2 529 62 11 www.aegtranzcom.com
ENERGY DIVISION
ENERGY DISTRIBUTION your need Our business and knowledge We are trough our engineering experience and knowledge gathered in many projects over the years in: INDUSTRIAL ENERGY DISTRIBUTION & RAILWAY SYSTEMS Capable of serving you the best possible way in energy distribution needs Supported by: A highly flexible production center with sheet metal, painting, mounting and wiring capacities 24 hours a day available installation, service, maintenance, commissioning capacities Capable partners and their wide range of delivery programs
PRODUCTS ET SERVICES Batteries Battery chargers and power supplies UPS systems Solar converters Thyristor power controllers LV Motor control centers MV Distribution Power factor compensation systems and Power quality Electronics for tap changers
BATTERIES Our distribution of the SAFT products provides reliable power back-up batteries specifically required by following market segments: Aviation Rail & Mass Transit Marine Military & Defense Telecommunication Building & Industrial Plants These industrial batteries have a very high degree of reliability and their trouble-free operation significantly reduces their total life cycling costs. Battery type Ni-Cd batteries Li-Ion batteries
BATTERY CHARGERS AND POWER SUPPLIES Switch Mode Systems/Modules Protect MIP (2-36KW) 24,48,110,125,220V Thyristor Systems Protect RCS SPRe/TPRe Profitec S, for NPP 24,48,110,125,220V Up to 2000A Heavy Duty Design ensures that the system can be located in industrial environment Proven microprocessor-controlled thyristor technology increase the availability Building block modular design High availability (internal redundancy N+1) All PCBs cards varnished Built-in protection Industrial standards: EN50178,IEC62040-1,IEC62040-2, IEC61000-6-2,IEC61000-6-4 Certification/Approval: CE, Shell DEP 33.65.50.31 (Protect RCS),Type test acctoiec60146-1-1 bykema (Protect RCS Serviceability and reduced costs for increased reliability
UPS SYSTEMS Compact series up to 10kVA/unit Protect A, B Off-line system Protect C, D On line systems Modular systems Protect 1M 1 phase output up 6 x 4kVA =24kVA Protect 3M 3fase output up 3(cubicles)x 6(modules/cubicle)x 20VA = 360kVA Industrial and high power systems Protect 3 1-3phase output up 120kVA Protect 8 1-3phase output up 120-500kVA Protect 4 3phase output up to 500kVA Protect 10 Bleu 3 phase output up to 1000kVA Paralleling up to 8 units for higher power or redundancy Specials as p.e. inverters only available
ENERGY DIVISION
SOLAR INVERTERS String inverters up to 15kW PV2000, 2000W PV2800, 2800W PV4600 4600W PV10000 10kW PV 12500 12.5 KW PV 15000 15 KW Central inverters PV250 LV & MV, 250kW PV500 MV, 500kW Outdoor container solutions Combinerboxes, monitoring.
THYRISTOR POWER CONTROLLERS AEG Tranzcom can offer standard and customized solutions based on a range off Thyristor Power controllers for use to switch, control, and regulated AC load supplies. These devices can be used where energy needs to be switched or regulated in industrial applications such as the automobile, oven, glass, chemical industries, steel production, conveyor lines, cooling equipments, tracing Thyristor Power Controllers product range Single phase: up to 1700 kva Three phase: up to 2800 kva Soft-starters 7.5-4800 kva New Thyro-A Next Generation Tailored solutions Electrical cabinets Including the power controllers
MOTOR CONTROL CENTERS AEG Tranzcom covers all your needs for high end energy distribution and motor control trough a fully modular switchgear with free component choice Engineered and assembled in our workshop. High quality industrial with-draw able distribution low voltage switch gear. Special attention towards user safety by closed door plug-in. No flexible wiring needed by patented contact mechanism. All designed and type tested towards IEC439-1. Technical data low voltage switchgears Nominal voltage: up to 690 V Nominal current: up to 6300 A Short circuit current: up to 100 ka Internal arc fault resistance: 65 ka 0.3 sec. Degree of protection: IP 40 (54) Width: 5001000 mm Depth: 500/700 mm Height: 2200 mm Busbars top or rear mounted Type tested towards IEC439-1
MOTOR CONTROL CENTERS AEG Tranzcom covers all your needs for high end energy distribution and motor control trough GE SEV32/SEK type distribution systems Engineered and assembled in our workshop. High quality industrial with-draw able distribution low voltage switch gear. Special attention towards user safety by closed door plug-in. All necessary mechanical interlocks. All designed and type tested towards IEC439-1. Technical data low voltage switchgears Nominal voltage: up to 690 V Nominal current: up to 6300 A Short circuit current: up to 100 ka Internal arc fault resistance: 80 ka 0.3 sec. Degree of protection: IP 20-54 Width: 400/500/600/800/900/1000/1200 mm Depth: 600/800/1000 mm Height: 2200 mm Busbars top or rear mounted Type tested towards IEC439-1
LV DISTRIBUTION SYSTEM AEG Tranzcom covers all your needs for high end energy distribution trough GE SEN + type distribution systems Engineered and assembled in our workshop. High quality industrial distribution low voltage switch gear. Special attention towards user safety All necessary mechanical interlocks. All designed and type tested towards IEC439-1. Technical data low voltage switchgears Nominal voltage: up to 690 V Nominal current: up to 4000 A Short circuit current: up to 80 ka Internal arc fault resistance: 80 ka 0.3 sec. Degree of protection: IP 20-54 Width: 400/500/600/800/900/1000/1200 mm Depth: 600/800 mm Height: 2000/2200 mm Busbars top or rear mounted Type tested towards IEC439-1
MV SWITCHGEARS AEG Tranzcom covers all your needs for high end medium voltage energy distribution and motor control trough a fully modular switchgear with free component choice Engineered and assembled in our workshop. High quality industrial with-draw able distribution Medium voltage switch gear. Industrial Medium voltage switchgears and MV motor control centres.. No flexible wiring needed by patented contact mechanism. All designed and type tested towards IEC60272-2 Technical data medium voltage switchgears Air-insulated Medium voltage switchgears with circuit breaker on cradle 12 kv up to 2500 A, 40 ka - 17.5 kv up to 4000 A, 50 ka 3 sec. (type NES-H) - 24kV up to 2500A 40kA Internal arc resistance until 50 ka 1 sec. - Metal-clad Individual compartments for main bus-bars, switching devices, cable connections and low-voltage devices Interlocks for operators safety Switching devices (vacuum or SF6) - Width: 500, 650, 800 or 1000 mm - Degree of protection up to IP 4X, Depth: 500/700 mm
REACTIVE POWER COMPENSATION SYSTEMS POWER QUALITY MANAGEMENT AEG Tranzcom is able to cover the complete range of Reactive Power Compensation Systems and components such as: Low Voltage automatic reactive power compensation Low Voltage dynamic compensation systems Tuned filter circuits and special systems Active filters Modules, Power Capacitors, Filter Circuit Reactors, Discharge Reactors, Thyristor Power Module Medium an high Voltage automatic reactive power compensation Medium an high Voltage dynamic compensation systems Services trough simulations, measurements, technical specifications, consultancy
REACTIVE POWER COMPENSATION SYSTEMS POWER QUALITY MANAGEMENT Monitoring, controlling, polling, evaluating With products and solutions from our electronics program, you've got everything under control. Reliable and in proven MR quality. Some products Automatic voltage regulators TAPCON 230 TAPGUARD 240 computes the most significant maintenance criteria of the onload tap-changer. It indicates the current status and shows the time interval until the next maintenance is due.
ENGINEERING, PRODUCTION & SERVICES Engineering Electrical engineering for LV, MV AC and DC networks Motor control, switchgear dimensioning Automation engineering Project management Electromechanical designs 3D-CAD design SEE electrical for electrical drawings Services 24 hours a day availability Installation works Commissioning Service Maintenance AutoCAD for general drawing applications Production Capacities Highly flexible production CNC Sheet metal punching, bending Painting Copper works Wiring and mounting Testing
A value added integrator that can deliver tailor-made solutions and services to customers in the industry and public transportation companies. www.aegtranzcom.com