CHEVROLET/GMC 05-06 COLORADO/ CANYON WD/4WD 5.5 SUSPENSION SYSTEM 5.5 Front Spacer / 3" Rear Block Kit # C39 $,99.95 Kit # C39N $,33.59 This new suspension system f the redesigned Colado has passed the FMVSS6 test f stability control compliance. To probably lift the new Colado/Canyon suspension 5.5, we started with new ductile cast iron steering knuckles. The new knuckles position the critical steering and control arm mounting location and wk in harmony with the heavy-duty fabricated crossmembers. Along with new crossmembers, the provided differential drop brackets lower and reposition the front differential f crect CV shaft angles and still allow f use of the facty front driveshaft..75 COMBO KIT Kit# C57 $05.95 Our.75 Combo kit includes our.5 front leveling kit (C) and.5 body lift (C957) f a complete lifted/leveled look and room f 85/70R7 tires on the stock wheels (5.75 BS). This kit is complete, including all the parts necessary f the leveling kit and body lift install, as well as step by step, detailed installations instructions. All while maintaining the facty ride quality and handling. Give your new Colado/Canyon the tough look it should have from the facty, with a very small investment of time and your hard earned money! Installation Skill Level: of 5 Estimated install time: 3-5 hr Max tire size: 85/70R7 Wheel size: 7 w/ 5.75 Backspacing NOTES (C57). No strut disassembly required C550 C55 C55 C553 C554 C409 4757 Box Kit of 4 Box Kit of 4 Box Kit 3 of 4 Box Kit 4 of 4 Strut Extension Box Kit Rear 4 Block Kit () 7757 WORKS WITH DIESEL Installation Estimated install time: 8 hr Max Tire Size: 95/70R7 305/55R0 Wheel Size: 7x8 w/ 4.5 Backspacing 0x9 w/ 5.5 Backspacing.5" BODY LIFT Kit# C957 $65.95 Complete.5 body lift kit Includes front and rear bumper relocation brackets Grade 0.9 body and bed mounting bolts Quicker and easier install than larger body lifts Maintains facty ride No effect on towing ability Limited Lifetime Warranty Installation Skill Level: of 5 Estimated install time: 3-5 hr Max tire size: 65/70R7 Wheel size: 7 w/ 5.75 Backspacing NOTES (C39). Inner fender trimming. Min welding required f steering stops when combined with certain tire/wheel combinations - see installation instructions 3. The facty Electric Power Assisted Steering (EPAS) is sensitive to out-of-round, out-of-balance, overly aggressive tires. Depending on the situation, some oscillating feedback in the steering wheel maybe experienced ZONEOFFROAD.COM.5 LEVELING KIT Kit# C $49.95 Laser Cut Steel E-Coated F Crosion Protection Completely Bolt-On - No strut disassebly required Retains facty ride quality Limited Lifetime Warranty Installation Skill Level: of 5 Estimated install time: hr Max tire size: 65/65R7 Wheel size: 7 w/ 5.75 Backspacing NOTES (C). No strut disassembly required. 65/65R7 Tire on facty 7x8 wheel w/5.75 backspacing - this includes any equivalent spec d larger diameter (8, 0, etc) wheel/tire combo. 4.75 Combo Lift - 85/70r7 Hankook A/Ts - 7x9 Raceline Mambas
3.5 C9906 08- Rear Bumper Lift Kit $39.95 C9907 04-07 Rear Bumper Lift Kit $53.95 4607 ( Req'd) $34.68 7607 ( Req'd) $4.50 NOTES (C355). F automatic transmission models only.. Wks with /4wd, all cab configurations. 3. Trimming of front bumper plastic valance frame required f front bumper relocation. 4. Bumper hitch not f towing after lifting rear bumper, facty/aftermarket receivers are not affected by lift. 5. Welding optional and required only if front facty tow hooks are retained. 6. Radiat and condenser brackets not designed f V8 models. C4 Installation Skill Level: of 5 Estimated install time: -3 hr Max tire size: 3x0.50R5 Wheel size: Stock Backspacing: Stock 4607 ( req'd) $34.68 7607 ( req'd) $4.50 C355 004-0 COLORADO/ CANYON 4WD 3.5 COMBO KIT Kit# C355 $349.95 Zone Offroad has developed a comprehensive 3.5 lift kit that combines the Zone.5 body lift and Zone front and rear lift kit. The benefit? A package priced kit that is nearly the height of a 4 suspension system and below the cost of a 3 body lift. Not only does it avoid the frame to body gap caused by taller body lifts, but it has the capability to clear 3 s even 33 tires with trimming that is outlined in the instructions. F me specific details on the body lift and leveling kit the included components in each refer to the specific kit listing in this section. Installation Estimated install time: 4-5 hr Max tire size: 3x.50x5 Wheel size: 6x8 w/ 5 Backspacing " LEVELING KIT Kit# C4 $99.95 00% resonant frequency tested to ensure a solid casting Made in the USA Easy installation Includes front shock spacers Levels out your truck Optional custom valved rear shocks available in the accessies Installation Skill Level: of 5 Estimated install time: hr Max tire size: 3x0.50R5 Wheel size: Stock Backspacing: Stock 4607 ( req'd) $34.68 7607 ( req'd) $4.50 " LIFT KIT Kit# C4 $49.95 00% resonant frequency tested to ensure a solid casting Made in the U.S.A Easy installation Includes front shock spacers Add-a-leaf will lift the rear while reducing unwanted spring wrap, unlike a block system Optional custom valved rear shocks available in the accessies.5 BODY LIFT Kit# C955 $39.95 Includes class 0.9 hardware Fully integrated radiat relocation mounts Front bumper.5 spacers and detailed trimming instructions Tow hook relocation and reinfcement included Installation Estimated install time: 4 hrs C9906 008- Rear bumper bracket kit $39.95 C9907 004-07 Rear bumper bracket kit $53.95 C4 NOTES (C955). F automatic transmission models only. Wks with /4wd, all cab configurations 3. Trimming of front bumper plastic valance frame required f front bumper relocation 4. Bumper hitch not f towing after lifting rear bumper, facty/aftermarket receivers are not affected by lift 5. Welding optional and required only if front facty tow hooks are retained. 6. Radiat & condenser brackets not designed f V8 models. CHEVROLET/GMC 888-998-ZONE 5
CHEVROLET/GMC ZONEOFFROAD.COM 04-06 500 PICKUP 4WD The Zone 4.5 and 6.5 systems include a pair of fully boxed heavy duty crossmembers and stout ductile iron steering knuckles engineered to wk with the redesigned steering. A 3-piece differential relocation system is utilized to crect front pinion angle with the center differential brace tying front and rear crossmembers together f a sturdy differential mount. This coupled with the differential skid plate and crossmember brace create an incredibly strong front subframe designed to crect suspension geometry while increasing ground clearance. To retain facty ride quality a pair of bolt-on strut spacers are used to provide lift. These install easily without the need to disassemble the facty strut. Also included in the kit are a pair of CV spacers, brake line brackets, sway bar relocation, and all the necessary hardware to complete the install. 6.5 SUSPENSION SYSTEM 6.5 IFS Knuckle / 5 Rear Block Kit # C5 Cast Steel Control Arms Kit # C6 Aluminum/Stamped Steel Control Arms $,95.95 Kit # C5N w/ Nitro Shocks Kit # C6N w/ Nitro Shocks $,09.59 () () C650 C65 C65 C656 6.5 KIT Estimated install time: 8 hrs Max tire size: 35 x.50 Wheel size: 7 x 9 w/ 5 Backspacing 8 x 9 w/ 5-5.5 Backspacing 0 x 9 w/ 5.75 Backspacing Box Kit of 3 Box Kit of 3 Box Kit of 3 Box Kit 3 of 3 () 7759 4.5 SUSPENSION SYSTEM 4.5 IFS Knuckle / 4 Rear Block Kit # C7 Cast Steel Control Arms Kit # C8 Aluminum/Stamped Steel Control Arms $,95.95 Kit # C7N w/ Nitro Shocks Kit # C8N w/ Nitro Shocks $,09.59 () () C650 C65 C65 C456 Box Kit of 3 Box Kit of 3 Box Kit of 3 Box Kit 3 of 3 () 7759 6.5 & 4.5 C659 Rear Add-a-Leaf $49.95 C565 07-5 GM 500 Skid Plate $59.95 C30 07-5 GM Upper Control Arm Kit $395.95 (Steel Knuckle Models Only) NOTES (C5/C6/C7/C8). All wheel drive models require drive line modification. Frame bracket modification and min welding required 3. To reduce trimming required 0 wheels with 5-3/4 backspacing recommended 4. 6.5 Kit only - Add-a-leaf option recommend f crew cab models f a me level stance 5. The Facty 7 and 8 wheels cannot be reinstalled with the lift. 4.5 KIT - 35 TIRES Estimated install time: 8 hrs Max tire size: 35 x.50 Wheel size: 0x9 Backspacing: 5.75 OPTIONAL ACCESSORY Optional Zone Skidplate C565 $59.95 (Note: Red backing plate not included) 4.5 KIT - 33 TIRES Estimated install time: 8 hrs Max tire size: 33 x.50 Wheel size: 7 x 9, 8 x 9 Backspacing: 5 6 6.5 Lift Kit - 35 Atturo M/T - 0 American Racing
4.5 SUSPENSION SYSTEM 4.5 IFS Knuckle / 5 Rear Block Kit # C35 Cast Steel Control Arms Kit # C36 Aluminum/Stamped Steel Control Arms $899.95 Kit # C35N w/ Nitro Shocks Kit # C36N w/ Nitro Shocks $90.49 () The 4.5 system f the WD /-ton GM trucks mimics the geometry of the tried and true, FMVSS No.6 compliant 4WD lift systems. The kits include a pair of fully boxed heavy duty crossmembers and robust ductile iron steering knuckles engineered to wk with the redesigned steering rack. This coupled with the crossmember braces creates an incredibly strong front subframe designed to crect suspension geometry while increasing ground clearance. To retain facty ride quality a pair of bolt-on strut spacers are used to provide lift. These install easily without the need to disassemble the facty strut. Also included in the kit are brake line brackets, sway bar relocation, rear 4 blocks, u-bolts, your choice of hydro nitro rear shocks and all the necessary hardware to complete the install. 4.5 KIT Estimated install time: 8 hrs Max tire size: 33 x.50 Wheel size: 7 x 9 w/ 5 Backspacing 8 x 9 w/ 5-5.5 Backspacing 0 x 9 w/ 5.5-5.75 Backspacing C650 C65 C453 NOTES (C35/C36). To reduce trimming required f tire fitment, a 0 wheel w/5.75 backspacing is recommended. The Facty 7 and 8 wheels cannot be reinstalled with the lift. 4.5" & 6.5" C565 Front Skidplate $59.95 C659 Rear Add-A-Leaf Kit $49.95 Box Kit of Box Kit of Box Kit of () 7759 Optional Zone Skidplate C565 $59.95 (Note: Red backing plate not included) 04-05 500 PICKUP WD 6.5 SUSPENSION SYSTEM 6.5 IFS Knuckle / 5 Rear Block Kit # C33 Cast Steel Control Arms Kit # C34 Aluminum/Stamped Steel Control Arms $899.95 Kit # C33N w/ Nitro Shocks Kit # C34N w/ Nitro Shocks $90.49 () The 6.5 system f the WD /-ton GM trucks mimics the geometry of the tried and true, FMVSS No.6 compliant 4WD lift systems. The kits include a pair of fully boxed heavy duty crossmembers and robust ductile iron steering knuckles engineered to wk with the redesigned steering rack. This coupled with the crossmember braces creates an incredibly strong front subframe designed to crect suspension geometry while increasing ground clearance. To retain facty ride quality a pair of bolt-on strut spacers are used to provide lift. These install easily without the need to disassemble the facty strut. Also included in the kit are brake line brackets, sway bar relocation, rear 5 blocks, u-bolts, your choice of hydro nitro rear shocks and all the necessary hardware to complete the install. 6.5 KIT Estimated install time: 8 hrs Max tire size: 35 x.50 Wheel size: 7 x 9 w/ 5 Backspacing 8 x 9 w/ 5-5.5 Backspacing 0 x 9 w/ 5.5-5.75 Backspacing C650 C65 C653 Box Kit of Box Kit of Box Kit of () 7759 NOTES (C33/C34). To reduce trimming required f tire fitment, a 0 wheel w/5.75 backspacing is recommended. The Facty 7 and 8 wheels cannot be reinstalled with the lift. CHEVROLET/GMC 888-998-ZONE 6.5 Lift Kit - Federal M/T - 0 XD Bomb 7
CHEVROLET/GMC ZONEOFFROAD.COM 8 04-06 500 PICKUP WD/4WD 3.5" COMBO SYSTEM Kit# C35 $9.95 Combines.5 Body Lift with Leveling Kit Front and Rear Bumper Brackets Included No Strut Compress Strut Dissassembly Required Retains Stock Ride Quality Estimated Install Time: 4-5 hrs Max Tire Size: 33 x.50 Wheel Size: Stock 479 (req d) $34.68 779 (req d) $4.50 C30 07-5 GM Upper Control Arm Kit $395.95 (Steel Knuckle Models Only) LEVELING KIT Kit# C00 $69.95 Solid -Piece Crosion Proof Design No Strut Compress Strut Dissassembly Required Retains Stock Ride Quality Fast & Easy Install Skill Level: of 5 Estimated install Time: hr Max Tire Size: 85/70R7 85 Wheel Size: Stock 479 (req d) $34.68 779 (req d) $4.50 C30 07-5 GM Upper Control Arm Kit $395.95 (Steel Knuckle Models Only) LIFT KIT Kit# C0 $9.95 Front Strut Spacer and Rear Block Kit No Strut Compress Strut Dissassembly Required Maintains a Tail High Stance Fast & Easy Install Skill Level: of 5 Estimated install Time: 4 hr Max Tire Size: 85/55 R0 Wheel Size: Stock 479 (req d) $34.68 779 (req d) $4.50 C30 07-5 GM Upper Control Arm Kit $395.95 (Steel Knuckle Models Only).5 BODY LIFT Kit# C95 $79.95 Class 0.9 Body Mount Bolts Included Front and Rear Bumper Brackets Included Front Tow Hooks Retained Much Easier To Install Than Taller Body Lifts Skill Level: of 5 Installation Time: 3-5 hrs NOTES (C35). Min trimming of the facty front bumper brackets required NOTES (C00). Will not fit 007 Classic models.. Will not fit MagnaRide magnetic ride control equipped models NOTES (C0). This system is f the new body style 07 models. It will not fit 07 Classic models.. Will not fit MagnaRide magnetic ride control equipped models NOTES (C95). Will NOT fit 007-03 models.. Will NOT fit Denali models. Will not fit MagnaRide magnetic ride control equipped models C35 UPPER CONTROL ARM KIT Kit# C30 $395.95 Excellent replacement f light duty facty control arms Offers me droop travel when used with properly designed leveling and 4-6 suspension lifts UCAs utilize replaceable ball joints - replacements are readily available from most auto parts stes when needed many miles down the road. - Raybestos #500-03B Include optional weld-on steering stops Fully welded /8 plate steel construction CNC machined ball joint mounts C95 NOTES (C30). 04-6 models - will ONLY wk on steel knuckle equipped trucks.. Includes a pair () of upper control arms
C Includes new coil over struts valved f larger tires. This means improved handling and ride quality compared to spacer kits on the market. 3.5 ADVENTURE SERIES UCA LIFT KIT 3.5" UCA/ 3 Rear Block Kit #C9 $749.95 Kit # C9N $763.59 4.5" & 6.5" C565 Front Skidplate $59.95 C659 Rear Add-A-Leaf Kit $49.95 C30 07-5 GM Upper Control Arm Kit $395.95 6.5" SPACER KIT C565 Front Skidplate $59.95 C659 Rear Add-A-Leaf Kit $49.95 NOTES (C40). All wheel drive models require front driveline modification. Will not fit 007 Classic models 3. Min frame bracket modification required 4. To reduce trimming f tire clearance, 0x9 w/5.5-5.75 BS recommended 5. Add-a-leaf kit C659 recommended f crew cab models to achieve me level stance 6. Will not fit hybrid models with electric power steering Fully welded, heavy duty upper control arms that dwarf the facty arms. CNC-machined UCA bushing and ball joint cups. OE rubber bushings and greasable facty style ball joints f quiet, reliable, and low maintenance operation. Improved UCA range of motion compared to stock arms UCAs utilize replaceable ball joints 3.5 Estimated Install Time: 3-4 hrs Max Tire Size: 85/70-7 Wheel Size: 7x9 w/ 5 Backspacing NOTES (C9). Certain tire/wheel packages can fit with the addition of the provided weld-on steering stops. These are necessary f deeper backspaced wheels to maintain proper tire clearance to the new upper control arms.. Min frame and front differential trimming required - see installation instructions f details 3. Do Not combine with any other suspension lift 6.5 SPACER KIT Estimated Install Time: 8 hrs Max Tire Size: 35 x.50 Wheel Size: 7 x 9 w/ 5 Backspacing 8 x 9 w/ 5.5 Backspacing 0 x 9 w/ 5.75 Backspacing C350 C309 479 Main Box Kit 3 Rear Block Kit () 779 007-03 500 4WD 6.5 SUSPENSION SYSTEM 6.5" Knuckle/ 5" Rear Block Kit # C $,95.95 Kit # CN $309.59 The Zone Offroad Suspension system yields the best perfmance f the price! The ¼ thick one piece crossmembers maintain a facty appearance and improve ground clearance over stock. In addition to an impressive differential skid plate that locks the crossmembers together, a strut bar is added on the passenger side to ensure a solid sub-frame. The CNC machined ductile iron steering knuckles ensure proper steering geometry as well as reduce installation time compared to a drop bracket system. To top it off, this kit includes new front coil-over struts. Combine all of these facts and you can lock in the Zone 6.5 system as the best value on the market! 4.5 SUSPENSION SYSTEM 4.5" Knuckle/ 4" Rear Block Kit # C8 $,95.95 Kit # C8N $309.59 This system includes everything in the 6.5 system. The only difference is the 4.5 system includes different struts to net 4.5 of lift. 6.5 Estimated Install Time: 8 hrs Max Tire Size: 35 x.50 Wheel Size: 7 x 9 w/ 5 Backspacing 8 x 9 w/ 5 Backspacing 0 x 9 w/ 5.75 Backspacing NOTES (C/C8). All wheel drive models require front driveline modification.. Will not fit 007 Classic models. 3. Strut compress required f installation. 4. Frame bracket modification and min welding required. 5. To reduce trimming required 0" wheels with 5 / to 5 3/4" backspacing recommended. 6. 6.5" Kit: Add-A-Leaf C659 recommended f crew cab models f a me level stance. 7. 4 Kit: Add-A-Leaf C659 recommended f a tail high stance. 8. Will not fit 009- two-mode hybrid models with electronic power steering (eps). C600 C60 C406 6.5 SPACER SUSPENSION SYSTEM 6.5" Strut Spacer/ 5" Rear Block Kit # C40 $999.95 Kit # C40N $,00.49 Box Kit of 3 Box Kit of 3 Box Kit 3 of 3 () 7759 Zone Offroad now offers a strut spacer alternative to our popular 07-3 6.5 replacement strut system. This new kit includes many of the same features as the current replacement strut kit but is geared me toward those that don t need the added perfmance of the replacement strut. The new strut spacer system still utilized the tried-and-true combination of ductile cast iron, precision machine steering knuckles along with -piece heavy duty crossmembers to help make the lift possible. A differential skid plate is included along with all the necessary differential and sway bar relocation brackets. The heavy duty, fully welded strut spacers bolt directly to the top of the facty strut and do not require disassembly of the strut. In the back, Zone Offroad only uses solid cast rear lift blocks as opposed to fabricated blocks and limits the height to 5. If you need additional rear height, Zone offers a preferred adda-leaf to fight spring wrap and yield additional height. Nitro rear shock option available. C600 C60 C606 C643 C644 C645 Box Kit of 3 Box Kit of 3 Box Kit 3 of 3 () 7759 4.5 Estimated Install Time: 8 hrs Max Tire Size: 33 x.50 Wheel Size: 7 x 9 w/ 5 Backspacing 8 x 9 w/ 5 Backspacing 0 x 9 w/ 5.75 Backspacing Box Kit of 3 Box Kit of 3 Box Kit 3 of 3 () 7759 CHEVROLET/GMC 888-998-ZONE 9
CHEVROLET/GMC 007-03 500 WD 6.5 SUSPENSION SYSTEM 6.5 Knuckle/ 5 Rear Block Kit # C $999.95 Kit # CN $,03.59 C600 C60 Box Kit of Box Kit of () 7759 The Zone Offroad Suspension system yields the best perfmance f the price! The ¼ thick one piece crossmembers maintain a facty appearance and improve ground clearance over stock. To create a solid subframe, the system includes two strut bars to secure the crossmembers together. The CNC machined ductile iron steering knuckles ensure proper steering geometry as well as reduce installation time compared to a drop bracket system. To top it off, this kit includes new front coil-over struts versus a simple strut spacer found in other systems on the market. Combine all of these facts and you can lock in the Zone 6.5 system as the best value on the market! KIT NOTES (C). Will not fit 007 Classic models. Strut compress required f installation 3. To reduce trimming required 0 wheels with 5-/ to 5-3/4 backspacing recommended 4. Add-a-leaf option recommend f crew cab models f a me level stance 5. Will not fit 009- Two-Mode Hybrid models with Electronic Power Steering (EPS) 6. Will not wk on extended/crew cab long box vehicles C Includes new coil over struts valved f larger tires. This means improved handling and ride quality compared to spacer kits on the market. 4.5" & 6.5" C565 Front Skidplate $59.95 C659 Rear Add-A-Leaf Kit $49.95 C30 07-5 GM Upper Control Arm Kit $395.95 Optional Zone Skidplate C565 $59.95 (Note: Red backing plate not included) ZONEOFFROAD.COM 4.5 SUSPENSION SYSTEM 4.5 Knuckle/ 4 Rear Block Kit # C9 $999.95 Kit # C9N $,03.59 C600 C40 Box Kit of Box Kit of () 7759 This system includes everything in the 6.5 system. The only difference is the 4.5 system includes different struts to net 4.5 of lift. 6.5 KIT Estimated Install Time: 4-5 hrs Max Tire Size: 35 x.50 Wheel Size: 7 x 9 w/ 5 Backspacing 8 x 9 w/ 5 Backspacing 0 x 9 w/ 5.75 Backspacing 4.5 KIT Estimated Install Time: 4-5 hrs Max Tire Size: 33 x.50 Wheel Size: KIT NOTES (C9). Will not fit 007 Classic models.. Strut compress required f installation. 3. To reduce trimming required 0 wheels with 5 / to 5 3/4 backspacing recommended. 4. Add-A-Leaf C659 recommended a tail high stance. 5. Will not wk on extended/crew cab long box vehicles. 7 x 9 w/ 5 Backspacing 8 x 9 w/ 5 Backspacing 0 x 9 w/ 5.75 Backspacing 3.5 ADVENTURE SERIES UCA LIFT KIT 3.5" UCA/ 3 Rear Block Kit #C30 $69.95 Kit # C30N $633.59 3.5 Estimated Install Time: 3-4 hrs Max Tire Size: 85/70-7 Wheel Size: 7 x 9 w/ 5 Backspacing C35 C309 479 NOTES (C30). Certain tire/wheel packages can fit with the addition of the provided weld-on steering stops. These are necessary f deeper backspaced wheels to maintain proper tire clearance to the new upper control arms.. Min frame and front differential trimming required - see installation instructions f details 3. Do Not combine with any other suspension lift 4. Does Not Fit 4WD Models Main Box Kit 3 Rear Block Kit () 779 0 6.5 Lift Kit - 35x.50 Toyo AT Tires - XD Misfit Wheels
C350 UPPER CONTROL ARM KIT Kit# C30 $395.95 Excellent replacement f light duty facty control arms Offers me droop travel when used with properly designed leveling and 4-6 suspension lifts UCAs utilize replaceable ball joints - replacements are readily available from most auto parts stes when needed many miles down the road. - Raybestos #500-03B Include optional weld-on steering stops Fully welded /8 plate steel construction CNC machined ball joint mounts C00 NOTES (C30). 04-5 models - will ONLY wk on steel knuckle equipped trucks.. Includes a pair () of upper control arms 007-03 500 WD/4WD 3.5" COMBINATION SYSTEM Kit# C350 $99.95 Looking f an affdable lift to clear 33 s? Spacer kits with me than " of lift cause premature wearing of the upper ball joints. Upper control arm lifts with new joints lead to increased camber changes during suspension travel. Zone Offroad has engineered the perfect, best perfming solution. We ve combined a " leveling lift with a.5" body lift to give optimum perfmance at a budget price. Skill Level: of 5 Estimated Install Time: 3 hrs Max Tire Size: 33 x.50 Wheel Size: Stock C9909 Rear Bumper Brackets $49.95 C990 Full Replacement Front Bumper Brackets $44.95 479 (req'd) $34.68 779 (req'd) $4.50 C30 07-5 GM Upper Control Arm Kit $395.95 Optional.5 Rear Bumper Brackets C9909 $49.95 " LEVELING KIT Kit# C00 $69.95 Tired of the front of your truck being lower than the rear? This " strut spacer lift is the answer. This spacer kit is easy to install and no strut compress disassembly of the strut is required. These are made from Polyphthalamide which is a thermoplastic synthetic resin commonly used to replace metals in automotive applications. These have been specifically engineered and molded to take some of the sheer load off the strut mounting bolts f a durable assembly. These strut spacers will level your truck while still maintaining the facty ride quality. Skill Level: of 5 Estimated Install Time: hr Max Tire Size: 85/70R7 85 Wheel Size: Stock 479 ( req d) $34.68 779 ( req d) $4.50 C30 07-5 GM Upper Control Arm Kit $395.95 " LIFT KIT Kit# C0 $9.95 Includes " rear blocks and u-bolts, and the " front strut spacers with a package price if you would prefer to lift your whole truck. Skill Level: of 5 Estimated Install Time: 4 hrs Max Tire Size: 85/55 R0 Wheel Size: Stock NOTES (C350). Will not fit 007 Classic models.. Will not fit Denali models. 3. The optional rear bumper relocation system is f appearance only and cannot be used f towing. Full Replacement.5 Front Bumper Brackets C990 $44.95 NOTES (C00). Will not fit 007 classic models. NOTES (C0). This system is f the new body style 07 models. It will not fit 07 Classic models. 479 ( req'd) $34.68 779 ( req'd) $4.50 C30 07-5 GM Upper Control Arm Kit $395.95 CHEVROLET/GMC 888-998-ZONE C0 Lower strut spacers provide the easiest install of any leveling kit on the market. No strut removal disassembly is required.
CHEVROLET/GMC 007-03 500 WD/4WD 3" BODY LIFT Kit# C9350 $374.95 Class 0.9 Body Mount Bolts Are Included Front and Rear Bumper Relocation Brackets Machined Steering Extension Included Emergency Brake Line Relocation Bracket Front Tow Hooks Retained Skill Level: of 5 Installation Time: 8 hrs Max Tire Size: 3 x.50 Wheel: Stock NOTES (C9350). Will not fit regular cab, long box configuration.. Will not fit Denali models. 3. Will not fit 007 Classic models. 4. The rear bumper is f appearance only. Can not be used f towing. 5. Manual transfer case models may require linkage modification. C9350.5" BODY LIFT Kit# C950 $49.95 Class 0.9 Body Mount Bolts Are Included Front Bumper Relocation Front Tow Hooks Retained Optional Rear Bumper Relocation Available Much Easier To Install Than Taller Body Lifts Skill Level: of 5 Installation Time: 3-5 hrs C950 C9909 Rear Bumper Brackets $49.95 C990 Full Replacement Front Bumper Brackets $44.95 ZONEOFFROAD.COM NOTES (C950). Will NOT fit 007 Classic models.. Will NOT fit Denali models 3. The optional rear bumper relocation system is f appearance only and cannot be used f towing. Full Replacement.5 Front Bumper Brackets C990 $44.95 Optional.5 Rear Bumper Brackets C9909 $49.95 3 Body Lift - 305/55r8 ATZs - stock 8s
C3 /4 thick crossmembers are made to give a facty-like appearance and crect the suspension geometry f 6" of lift Compression struts included f a solid subframe NOTES (C3). Tsion bar unloading tool required.. Requires frame bracket modification and differential mount modification. 3. Will not fit HD models. See kit #C4 4. Compression struts won t wk with early 99 models with an S shaped transmission crossmember. 5. If equipped with 7 stock wheels, 7 larger aftermarket wheels must be used. 6. Min welding required. 7. Will not fit old body style 999 models. 8. It may be required to der the rear add-a-leaf kit C659 f a slightly above level to tail high appearance. 9. Optional Add-a-leaf kit is recommended on Crew Cab models to achieve me level stance. TORSION BAR KEYS Kit# C0 $99.95 Zone Offroad tsion bar keys are made in the USA and are 00% resonant frequency tested to ensure a solid casting. Once tested the keys are CNC machined to achieve a consistent of lift with the adjustment bolts in the facty location. Optional, custom valved shocks available. Skill Level: of 5 Estimated Install Time: hr Max Tire Size: 85/70R7 Wheel Size: Stock NOTES (C0). Tsion Bar unloading/loading tool required. Optional shocks will not fit 999 old body style trucks, use 88-98 listing. LIFT KIT Kit# C $49.95 Includes rear blocks and u-bolts with tsion bar keys. If you prefer to raise the whole truck and keep the facty tail high stance. (C0 & C) 46 ( req d) $34.68 479 ( req d) $34.68 76 ( req d) $4.50 779 ( req d) $4.50 300 Steering Stabilizer $73.35 700 Steering Stabilizer (Black) $79.35 Skill Level: of 5 Estimated Install Time: 4 hrs Max Tire Size: 85/70 Wheel Size: Stock NOTES (C). Tsion bar unloading tool required.. Will not fit 500HD models, see kit # C/C3 to verify RPO code based fitment. 3. Optional Hydro Nitro shocks available - see accessies section below and be sure to select the proper year range when dering 999-006 500 4WD 6" SUSPENSION SYSTEM 4WD Kit# C3 $,99.95 6" Knuckle/ 5" Rear Block Kit # C3 $,99.95 Kit # C3N $,37.3 The Zone Offroad suspension system f the 99-06 Chevy and GMC trucks is designed f a everyday driver, but is made to handle offroad use. The main crossmembers were designed to match the facty geometry and appearance. Combined with the CNC machined steering knuckles everything is relocated to facty specs creating a true facty quality driving experience. This is a go anywhere system as it comes with compression struts f added frame suppt. Estimated Install Time: 8 hrs Max Tire Size: 35x.50 Wheel Size: 6x8 w/ 4.5" Backspacing 0x8 w/ 5.75 Backspacing RECOMMENDED ACCESSORIES 300 Steering Stabilizer $73.35 700 Steering Stabilizer (Black) $79.35 C659 Rear add-a-leaf (tail high stance) $49.95 3.5 COMBO KIT Kit# C354 999-00 $49.95 Kit# C353 003-005 $49.95 Kit# C35 006-007 Classic $49.95 C354 If you re looking to go taller than but are not interested in the expense of a full IFS system, our 3.5 combination lift is the answer. Beware of tsion key systems taller than that can adversely affect your ride. This system will clear 33 s with your stock wheels f a clean lift at a low cost. Skill Level: of 5 Installation Time: 4 hrs Max Tire Size: 33x.50 Wheels: Stock () () C60 C6 C6 460 760 7759 C9908 Rear Bumper Brackets $44.95 300 Steering Stabilizer $73.35 700 Steering Stabilizer (Black) $79.35 46 Front Hydro Shock ( req d) $34.68 479 Rear Hydro Shock ( req d) $34.68 76 ( req d) $4.50 779 ( req d) $4.50 Box Kit of 3 Box Kit of 3 Box Kit 3 of 3 NOTES (C354/C353/C35). Will not fit HD models.. If rear bumper bracket system is purchased and installed, the rear bumper cannot be used f towing. The rear bumper system is f appearance only. 3. Tsion bar unloading tool required f install. 4. C35 systems do not fit new body style 007 models. CHEVROLET/GMC 888-998-ZONE 3
CHEVROLET/GMC 999-006 500 WD/4WD 3" BODY LIFT Kit# C9355 999-000 $307.95 Kit# C9354 00-00 $307.95 Kit# C9353 003-005 $34.95 Kit#C935 006-007 Classic $385.95 Class 0.9 Body Mount Bolts Are Included Front and Rear Bumper Relocation Steering Extension Included Radiat Relocation Brackets Included Installation Time: 6-8 hrs NOTES (C9355/C9354/C9353/C935). Will not fit heavy duty (500 HD) models. Will NOT fit Denali models due to differences in the bumper brackets. 3. The rear bumper relocation system is f appearance only. Once this system is installed the rear bumper cannot be used f towing 4. Manual transmission models will require shifter extension # C9806 5. C9355 - WIll not fit 999 old body style trucks. C9353.5" BODY LIFT Kit# C954 999-00 $59.95 Kit# C953 003-005 $59.95 Kit# C95 006-007 Classic $65.95 This.5" body lift is perfect to add just that little extra tire clearance that you need. Combine this body lift with a leveling kit and you have the perfect combination. The system relocates the front bumper to maintain a facty look. An optional rear bumper relocation system is available. Grade 0.9 body bolts are included along with Zone Offroad's crushproof body blocks. Skill Level: of 5 Installation Time: 3-4 hrs C9908 Rear Bumper Brackets $44.95 C954 ZONEOFFROAD.COM NOTES (C954/C95/C95). Will not fit HD models.. C95 Will not fit Denali models 3. If rear bumper bracket system is purchased and installed, the rear bumper cannot be used f towing. The rear bumper system is f appearance only. 4. C95 systems do not fit new body style 007 models. 4.5 Body Lift - 3 BFG A/T - 6 Ultra Badland
Photo shows kit with Nitro shocks upgrade 988-998 500 4WD & 500 6-LUG 4WD 99-998 YUKON, TAHOE -DOOR 6-LUG, SUBURBAN 6-LUG NOTES (C4). Tsion bar un-loading tool required. Not designed f 4 do model Tahoe and Yukon 3. Requires exhaust modification to clear the front driveshaft 4. Requires frame bracket modification and differential mount modification 5. Models equipped with auto-trac may require a new front driveshaft. The auto-trac (New Process 46) transfer case can be identified by the badge on the rear of the transfer case that reads NP46. In addition, the dash mounted display will show the Auto 4WD symbol. (NP43 is not auto-trac) 6" DROP BRACKET SYSTEM 6" Drop Bracket / 5" Rear Block Kit # C4 $,95.95 Kit # C4N $,3.3 C640 C64 C64 C649 4600 4609 7600 7609 304 Single Steering Stabilizer $57.49 Box Kit of 3 Box Kit of 3 Box Kit 3 of 3 Rear Box Kit Introducing the latest addition to the Zone Offroad line of Chevy and GMC products, our 88-98 K500 6 Suspension System incpates a completely new and improved design compared to the other bracket style kits on the market. Zone Offroad took a different approach with this kit by utilizing -piece upper control arm drop brackets to crect the ball joint geometry and maintain the use of your facty steering knuckles. A few of the advantages to this setup are no track width change and facty wheels can be re-used with 35x.50 tires. Like our other systems, the kit comes with stout main crossmembers and differential drop brackets to re-align the CV shafts and driveshaft while maintaining a clean look. Make your truck stand out from the rest with our new 6 lift engineered with not only affdability, but the quality many have come to expect from Zone Offroad Products. Estimated Install Time: 8 hrs Max Tire Size: 35 x.50 Wheel Size: Facty and larger diameter Back Spacing: Facty less backspacing CHEVROLET/GMC 888-998-ZONE 6 Lift Kit - 35x.50 ATZs - 0x9 Eagle 079s 5
CHEVROLET/GMC 988-998 500 4WD " LIFT KIT W/ " REAR BLOCK Kit# C $49.95 Includes " rear blocks and u-bolts with " tsion bar keys. If you prefer to raise the whole truck and keep the facty tail high stance. Skill Level: of 5 Estimated Install Time: 4 hr Max Tire Size: 85/70 Wheel Size: Stock 460 ( req d) $34.68 4608 ( req'd) $34.68 760 ( req'd) $4.50 7608 ( req'd) $4.50 NOTES (C). Tsion bar unloading tool required.. Will not fit 500HD models, see kit # C/C3 to verify RPO code based fitment. 3. Optional Hydro Nitro shocks available - be sure to select the proper year range when dering. C " TORSION BAR KEYS Kit# C0 $99.95 Zone Offroad tsion bar keys are made in the USA and are 00% resonant frequency tested to ensure a solid casting. Once tested the keys are CNC machined to achieve a consistent of lift with the adjustment bolts in the facty location. Optional, custom valved shocks available. Skill Level: of 5 Estimated Install Time: hr Max Tire Size: 85/70 Wheel Size: Stock C0 ZONEOFFROAD.COM 6 460 ( req d) $34.68 4608 ( req'd) $34.68 760 ( req'd) $4.50 7608 ( req'd) $4.50 NOTES (C0). Tsion Bar unloading/loading tool required. Optional shocks will not fit 999 old body style trucks, use 88-98 listing. 3" BODY LIFT Kit# C9357 988-994 $76.95 Kit# C9356 995-998 $9.95 Fan Shroud Relocation Included Fuel Fill Extension Included No Welding Required Machined Steering Extension Included Body Lift Blocks capable of handling 60,000 lbs Front Bumper Relocation Brackets Included Estimated Install Time: 8 hrs Wheel Size: Stock C9950 Rear Bumper Bracket Relocation Kit $6.95 NOTES (C9357/C9356). Will not fit vehicles with a diesel mot.. Rear bumper brackets are f appearance only. The rear bumper cannot be used f towing after installation. 3. Fits standard, extended, and crew cab; long and sht box configuration. C9356 C9950
The heart of the Zone Offroad 5" 0-6 HD lift kit is a pair of one piece ¼ steel crossmembers combined with the CNC machined steering knuckles to create OE geometry f a quality ride. Also included is a laser cut differential skid plate, differential suppt brackets, tsion bar brackets, sway bar links, offset rear 3" lift blocks, stainless steel brake lines and custom valved shocks. This system is designed to level the truck and has zero change to the vehicle's track width allowing f clearance of up to 35x.50 tires. No differential trimming required! NOTES (CN/C3N). Tsion bar unloading/loading tool required. Frame bracket modifications required f installation 3. With a 0" Wheel, 5"-6" backspacing is recommended 4. Rear kit designed f single rear wheel axles. 5. Stock 7 8 Wheels cannot be re-installed C37N This new system uses the popular Zone Adventure Series boxed steel upper control arm design along with traditional tsion key technology in der to gain 3 of lift. By using the new fabricated arms, equipped with facty style ball joints and rubber bushings, the system is able to maintain a better quality ride and suspension travel over standard leveling kits. In addition, a front differential drop is included to keep CV angles within the facty operating range. Rear blocks bring the rear up to give a very slight tail high stance allowing the truck to be used as it was intended without having a saggy ride. Front and rear Nitro shocks come standard to round out this simple yet advanced suspension system. HEAVY DUTY UCA KIT Kit# C3 $49.95 These new upper control arms are direct replacements f the facty arms, offering improved suspension travel and ride quality over the facty control arm design. S Skill Level: of 5 Estimated Install Time: 3-4 hrs Wheel Size: 7x9 (5-5.5 Backspacing) 8x9 (6 Backspacing) 0x9 (6 Backspacing) " LEVELING KIT Kit# C04 $99.95 6. Will fit wd models. The front differential related parts will not be used. 7. Facty 0 wheels with Me than 6 total backspacing cannot be reinstalled with the lift. 8. Facty 0 x 8.5 wheels with 6 backspacing less will fit with a max tire size of 35x.50 NOTES (C37N/38N). Min trimming may be required, especially if a wheel backspace of less the specified is used.`. Proper tsion bar unloading tool required f installation. 3. Not designed f dually models. Zone Offroad tsion bar keys are made in the USA and are 00% resonant frequency tested to ensure a solid casting. Once tested the keys are CNC machined to achieve a consistent " of lift with the adjustment bolts in the facty location. Shock relocation brackets longer shocks are required and are listed in the recommend accessies. ( KITS & TORSION BAR KEYS) C50 Extension Kit $9.95 7603 s ( req d) $59.00 303 Single Steering Stabilizer $5.95 703 Single Steering Stabilizer (Black) $56.95 0-06 500HD & 3500HD WD/4WD 5" SUSPENSION SYSTEM 5" Knuckle/ 3" Rear Block w/o Top Overload Springs Kit # CN $,399.94 5" Knuckle/ 3" Rear Block w/ Top Overload Springs Kit # C3N $,399.94 C630 C63 C63 C633 C634 C639 763 7759 C630 C63 C63 C633 C634 C638 763 7759 Installation Estimated Install Time: 6-8 hrs Max Tire Size: 35x.50 Wheel Size: 7x9 / 8x9 (w/ 4.5"-4.65" Backspacing) 0x9 (w/ 5"-6" Backspacing) Over 0", use 0" specs 303 Single Steering Stabilizer $5.95 703 Single Steering Stabilizer (Black) $56.95 3" ADVENTURE SERIES UCA LIFT KIT 3 UCA/ Rear Block w/o Top Overload Springs Kit # C37N $75.45 3 UCA/ Rear Block w/ Top Overload Springs Kit # C38N $779.95-35 TIRES Estimated install time: 4-5 hrs Max tire size: 35 x.50 Wheel size: 0x9, 8x9 Backspacing: 6 C3 C07 764 7757 C3 C08 764 7757 303 Single Steering Stabilizer $5.95 703 Single Steering Stabilizer (Black) $56.95 " LIFT KIT Kit# C44 - w/o Overload Kit# C45 - w/ Overload $59.95 Box Kit of 5 Box Kit of 5 Box Kit 3 of 5 Box Kit 4 of 5 Box Kit 5 of 5 Rear Box Kit Box Kit of 5 Box Kit of 5 Box Kit 3 of 5 Box Kit 4 of 5 Box Kit 5 of 5 Rear Box Kit Box Kit of Rear Box Kit Box Kit of Rear Box Kit - 34 TIRES Estimated install time: 4-5 hrs Max tire size: 34 x.50 Wheel size: 7x9 Backspacing: 5-5.5 This system is designed to maintain the facty tail high stance of your truck by lifting the front and rear ". This package includes " tsion bar keys, shock relocation spacers, rear blocks and u-bolts. Fit larger tires without effecting towing capability. KIT Skill Level: of 5 Estimated Install Time: Tsion Bars - hr, Front & Rear - -3 hrs Max Tire Size: 34x.50 Wheel Size: Stock/7x9/8x9/0x9 (5-6 Backspacing) NOTES (C44/C45/C04). Tsion bar unloading tool is required. 35x.50 tires require min trimming when used with facty backspaced wheels. If using wheels with less backspace than facty, 33 tires are recommended. 3. Shock extension spacers are necessary unless shocks longer than stock are installed. CHEVROLET/GMC 888-998-ZONE 7
CHEVROLET/GMC ZONEOFFROAD.COM 8 00-00 500HD & 3500HD 4WD 00-006 500 NON-HD & 500HD 4WD 00-006 SUBURBAN & AVALANCHE 500 4WD 6" SUSPENSION SYSTEM 6" Knuckle/ 5" Rear Block Kit # C4 $,95.95 Kit # C4N $,33.3 The Zone HD system is built f everyday driving but sturdy enough f offroad abuse. The one piece main crossmembers in combination with the CNC machined ductile steering knuckles match the OE geometry f excellent ride and handling. The differential skid plate and the compression struts offer off-road protection f the serious trails. Complete with tsion bar brackets, differential drop brackets, CV spacers, sway bar links, rear blocks, u- bolts and 4 twin tube hydraulic shocks f a smooth ride. If quality, perfmance and value are what you demand, then look no further! Estimated Install Time: 8 hrs Max Tire Size: 35x.50 Wheel Size: 6x8 w/ 4.5" Backspacing 7/8x9 w/ 5-5.5" Backspacing 0x9 w/ 5.75" Backspacing 6 KIT C56 Carrier Bearing Drop $49.95 C300 0-0 GM Upper Control Arm Kit $369.95 3 ADVENTURE SERIES UCA LIFT SYSTEM HD UPPER CONTROL ARM KIT ALSO AVAILABLE...SEE PAGE 3 UCA/ Rear Block Kit # C3 $795.95 Kit # C3N $83.3 3 UCA/ Rear Block Kit # C3 $795.95 Kit # C3N $83.3 () () 7 () () () () C60 C6 C6 C63 4605 7605 7759 C30 C300 C09 466 4757 766 7757 C30 C300 C09 466 4757 766 7757 Fully welded, heavy duty upper control arms that dwarf the facty arms. CNC-machined UCA bushing and ball joint cups. OE rubber bushings and greasable facty style ball joints f quiet, reliable, and low maintenance operation. Improved UCA range of motion compared to stock arms UCAs utilize replaceable ball joints Front tsion bar keys and rear block kit SEE NOTE Max Tire Size: 33x.50 Wheel Size: 7x9 w/ 5" Backspacing 4 Box Kit of 4 Box Kit of 4 Box Kit 3 of 4 Box Kit 4 of 4 HD UPPER CONTROL ARM KIT ALSO AVAILABLE...SEE PAGE Box Kit of 3 Box Kit of 3 Box Kit 3 of 3 Box Kit of 3 Box Kit of 3 Box Kit 3 of 3 BEFORE ORDERING 7 NOTES (C4). Tsion bar unloading/loading tool required.. To reduce trimming on new body style HD s 0 wheel with 5 3/4 backspacing recommended. 3. Gas models required min exhaust modification to clear front driveshaft. 4. Also fits Avalanche/Suburban 500 models. 5. Min welding required. 6. Frame bracket and differential mount modifications required. 7. Vehicles equipped with a two piece drive shaft and a carrier bearing require bearing drop kit (C56). 8. Not designed f dually models LIFT KIT Kit# C/C3 00-00 500HD $59.95 This system is designed to maintain the facty attitude of your truck by lifting the front and rear. This package includes tsion bar keys, shock relocation brackets, and rear blocks and u-bolts. Buy everything at once and save some cash to buy the Mrs. something nice. SEE NOTE 4 LEVELING KIT Kit# C0/C03 0-0 500HD/3500 $99.95 BEFORE ORDERING Zone Offroad tsion bar keys are made in the USA and are 00% resonant frequency tested to ensure a solid casting. Once tested the keys are CNC machined to achieve a consistent of lift with the adjustment bolts in the facty location. Unlike the competition, Zone lists their tsion keys based on RPO codes to ensure proper fitment on each truck, so be sure to review note #3 to determine which kit number is required. Shock relocation brackets longer shocks are required and are listed in the recommend accessies. SEE NOTE BEFORE ORDERING KIT Skill Level: of 5 Estimated Install Time: " Tsion Bars - hrs, " Front & Rear - 4 hrs Max Tire Size: 33x.50 Wheel Size: Stock (" KITS & " TORSION BAR KEYS) C50 Shock Relocation Brackets $30.00 (C0 & C03 only) 465 ( req d) $34.68 4757 ( req'd) $34.68 765 ( req d) $4.50 7757 ( req d) $4.50 C300 0-0 GM Upper Control Arm Kit $369.95 NOTES (C0/C03/C/C3/C3/C3). Frame bracket mount modification required (C3/C3). Rear u-bolts will not fit dually applications. 3. Front shock relocation brackets longer shocks recommended. (C0/C03) 4. To determine which kit # is required, verify which RPO codes are shown in the glovebox to determine the facty installed tsion keys. Any of the following RPO codes require the C0/C/C3 kits: FT FT3 - FT4 FT5 FT6 FT7. Any of the following RPO codes require the C03/C3/C3 kits: FK FK3 FF6 FF7 FF8 FF9. 4
00-00 500HD WD & 500 NON-HD WD 00-006 500HD WD C5 ¼" thick crossmembers are made to give a facty-like appearance and crect the suspension geometry f 6" of lift Compression struts included f a solid subframe. UPPER CONTROL ARM KIT WD & 4WD Kit# C300 $369.95 Fully welded /8 plate steel construction CNC machined ball joint mounts Direct replacement f OEM control arms UCAs utilize replaceable ball joints - replacements are readily available from most auto parts stes when needed many miles down the road. - Raybestos #500-04B HD UCA kit wks great as a combo with leveling keys *See Imptant Notes Also wks well with most 6-7 suspension lifts NOTES (C300). F leveling kit installations, the new arms should only be paired with the replacement Zone front shock #s 465 765.. C50 shock relocation brackets should not be used. 6" SUSPENSION SYSTEM 6" Knuckle/ 5" Rear Block Kit # C5 $,49.96 Kit # C5N $,77.4 () () The Zone wd HD system is built f everyday driving but sturdy enough f offroad abuse. The one piece main crossmembers in combination with the CNC machined ductile steering knuckles match the facty geometry f excellent ride and handling. The crossmembers are locked together with strut braces and rear compression struts to handle the heavy duty use of your truck. Complete with tsion bar brackets, sway bar links, rear blocks, u-bolts and twin tube hydraulic shocks f a smooth ride. If quality, perfmance and value are what you demand, then look no further! Estimated Install Time: 6-8 hrs Max Tire Size: 35x.50 Wheel Size: 6 x 8 w/ 4.5" Backspacing 7/8 x 9 w/ 5-5.5" Backspacing 0 x 9 w/ 5.75" Backspacing C60 C607 C608 C63 4605 7605 7759 Box Kit of 4 Box Kit of 4 Box Kit 3 of 4 Box Kit 4 of 4 RECOMMENDED ACCESSORIES (see note 4) C56 Carrier Bearing Drop (mounted above crossmember) $49.95 C56 Carrier Bearing Drop (mounted below crossmember) $49.95 C300 0-0 GM Upper Control Arm Kit $369.95 NOTES (C5). Tsion bar unloading/loading tool required.. To reduce trimming on new body style HD s 0" wheels with 5 3/4" backspacing recommended. 3. Gas models required min exhaust modification to clear front driveshaft. 4. Although unusual, some models with a carrier bearing may experience driveline vibration. If this occurs, der appropriate carrier bearing drop listed in the accessies. 5. Not designed f dually models CHEVROLET/GMC 888-998-ZONE 6 Lift Kit - 35x.50 Kumho M/Ts - 8x9 Gear Alloys 9
CHEVROLET/GMC ZONEOFFROAD.COM 007-04 AVALANCHE, SUBURBAN, TAHOE, YUKON, YUKON XL 500 4WD 6.5" SUSPENSION SYSTEM 6.5" Knuckle/ 5.5" Rear Spring Kit # C6 $,739.99 Kit # C6N $,753.63 C603 C604 C605 Box Kit of 3 Box Kit of 3 Box Kit 3 of 3 () 7759 This 6" system will give your ride the look as well as the on and offroad perfmance you are looking f from an aftermarket suspension system. Custom valved replacement struts are included to properly handle the increased weight of the larger tires & wheels. The differential skidplate, additional strut bar, and /4" thick steel crossmembers create a subframe that is bulletproof. The CNC machined ductile iron steering knuckles ensure proper steering geometry as well as reduce installation time compared to a drop bracket system. The rear is completed with new coil springs, track bar bracket, and adjustable upper arms to crect the pinion angle. By far the most complete system on the market f the money! Estimated install time: 8 hrs Max tire size: 33 x.50, 34 x.50, 35 x.50 Wheel size: 33 Tire: 7 x 9 w/ 4.5" Backspacing 34 Tire: 8 x 9 w/ 5" Backspacing 35 Tire: 0 x 9 w/ 5.75" Backspacing NOTES (C6). All wheel drive models require driveline modification.. Will not fit vehicles equipped with Auto-Ride. 3. This is f new body style 007 only. Will not fit classic models. 4. Strut compress required f installation. 5. Frame bracket modification and min welding required. 6. Min premature engagement of the Stabilitrack system may occur during certain maneuvers. 7. To reduce trimming, 0" wheels with 5.5"-5.75" backspacing recommended. 8. Will not fit 009- two mode hybrid models with electric power steering (EPS)..5 BODY LIFT KIT (07-3 AVALANCHE ONLY) Kit# C956 $49.95 Class 0.9 body mount hardware Crush-proof reinfce nylon body lift blocks Front and rear bumper relocation Detailed installation instructions Estimated install time: 4 hrs Includes new coil over struts valved f larger tires. This means improved handling and ride quality compared to spacer kits on the market. C565 Front Skidplate $59.95 C30 GM Upper Control Arm Kit $395.95 4 COMBO KIT (007-00 - EXCLUDING AVALANCHE) Kit# C400 $379.95 Maintains facty ride. Front bumper is relocated f facty look. Grade 0.9 body bolts included. No strut compress required f installation. Estimated install time: 6-8 hrs Max tire size: 33 x.50 Wheel size: Stock 479 ( req'd) $34.68 779 ( req'd) $4.50 NOTES (C95). This is f new body style 007 only. Will not fit classic models.. Bumper Brackets will not fit Avalanche models. 3. Autide equipped vehicles will need the ride height sens linkage to be lengthened. C6 30 6.5 Lift Kit - 35 Toyo AT - 0 V-Tec Wheels
NOTES (C30). Includes a pair () of upper control arms 007-04 500 SUBURBAN, TAHOE, YUKON, YUKON XL WD/4WD Lower strut spacers provide the easiest install of any leveling kit on the market. No strut removal disassembly is required. " LEVELING KIT Kit# C00 $69.95 Tired of the front of your truck being lower than the rear? This " strut spacer lift is the answer. This spacer kit is easy to install and no strut compress disassembly of the strut is required. These are made from Polyphthalamide which is a thermoplastic synthetic resin commonly used to replace metals in automotive applications. These have been specifically engineered and molded to take some of the sheer load off the strut mounting bolts f a durable assembly. These strut spacers will level your truck while still maintaining the facty ride quality. Skill Level: of 5 Estimated install time: hr Max tire size: 85/70R7 85/55R0 Wheel size: Stock " BODY LIFT (007-00) Kit# C95 $39.99 Class 0.9 Body Mount Bolts Front and Rear Bumper Relocation Brackets Front Tow Hooks Retained Estimated install time: 5-6 hrs NOTES (C95). This is f new body style 007 only. Will not fit classic models.. This body lift will not fit Avalanche models due to differences in the rear bumper. UPPER CONTROL ARM KIT (007-03) Kit# C30 $395.95 Excellent replacement f light duty facty control arms Offers me droop travel when used with properly designed leveling and 4-6 suspension lifts UCAs utilize replaceable ball joints - replacements are readily available from most auto parts stes when needed many miles down the road. - Raybestos #500-03B Include optional weld-on steering stops Fully welded /8 plate steel construction CNC machined ball joint mounts CHEVROLET/GMC 888-998-ZONE Leveling Kit - 33x.50 Nitto A/T on 0s 3
CHEVROLET/GMC ZONEOFFROAD.COM 3 000-006 500 AVALANCHE, SUBURBAN, TAHOE, YUKON 4WD 6" SUSPENSION SYSTEM 6" Knuckle/ 6" Rear Spring Kit # C7 $,679.95 Kit # C7N $,707.3 () () The Zone Offroad suspension system f the Chevy and GM SUV s is designed f an everyday driver, but built to handle offroad abuse. The lower control arm crossmembers match the facty geometry and appearance. Combined with the CNC machined steering knuckles, the critical components are relocated to facty specs creating a true facty quality driving experience. The differential skid plate combined with the compression struts f added frame suppt creates an extremely solid system. The rear is lifted with new coil springs, with a track bar bracket and sway bar links included. If you ve been shopping f the best deal on a lift, look no further. RECOMMENDED ACCESSORIES 300 Steering Stabilizer $73.35 700 Steering Stabilizer (Black) $79.35 Estimated install time: 8 hrs Max tire size: 33x.50, 34x.50, 35x.50 Wheel size: 33 Tire: 6 7x8 w/ 4.5 Backspacing 34 Tire: 8x9 w/ 5 Backspacing 35 Tire: 0x9 w/ 5.75 Backspacing " TORSION BAR KEYS Kit# C0 $99.95 Zone Offroad tsion bar keys are made in the USA and are 00% resonant frequency tested to ensure a solid casting. Once tested the keys are CNC machined to achieve a consistent " of lift with the adjustment bolts in the facty location. Optional, custom valved shocks available. Skill Level: of 5 Estimated install time: hr Max tire size: 85/70 Wheel size: Stock 000-005 500 SUBURBAN, TAHOE, YUKON WD/4WD 3 BODY LIFT Kit# C935 $339.95 Estimated install time: 6-8 hr C63 C64 C65 460 760 7759 Box Kit of 3 Box Kit of 3 Box Kit 3 of 3 C9806 Manual Transmission Shifter Extension $5.95 NOTES (C935). Rear bumper brackets are f appearance only. The rear bumper cannot be used f towing after installation.. Manual transmission models require shifter extension part # 9806 3. This kit fits / ton (500) models only. CAD designed ¼" thick crossmembers and differential skidplate fit and look like facty f a clean look. Compression struts included f a solid subframe NOTES (C7). Will not fit vehicles equipped with Auto-Ride. Not recommended f all wheel drive (AWD) models 3. Tsion bar tool required f installation. 4. Frame bracket modification and min welding required. 5. If equipped with facty 7 wheels, then they must be replaced with 7 larger aftermarket wheels. 6. Stock tires & wheels can be installed back on the vehicle, but larger tires cannot be installed on facty wheels. NOTES (C0). Tsion Bar unloading/loading tool required. Optional shocks will not fit 999 old body style trucks, use 88-98 listing. 46 ( req d) $34.68 479 ( req'd) $34.68 76 $4.50 779 $4.50 300 Steering Stabilizer $73.35 700 Steering Stabilizer (Black) $79.35 C935 C0
Photo shows kit with Nitro shocks upgrade Introducing the latest addition to the Zone Offroad line of Chevy and GMC products, our 88-98 K500 6 Suspension System incpates a completely new and improved design compared to the other bracket style kits on the market. Zone Offroad took a different approach with this kit by utilizing -piece upper control arm drop brackets to crect the ball joint geometry and maintain the use of your facty steering knuckles. A few of the advantages to this setup are no track width change and facty wheels can be re-used with 35x.50 tires. Like our other systems, the kit comes with stout main crossmembers and differential drop brackets to re-align the CV shafts and driveshaft while maintaining a clean look. Make your truck stand out from the rest with our new 6 lift engineered with not only affdability, but the quality many have come to expect from Zone Offroad Products. C C936 99-998 BLAZER, TAHOE, YUKON, SUBURBAN 500 4WD 6" DROP BRACKET SYSTEM 6" Drop Bracket / 5" Rear Block Kit # C4 $,95.95 Kit # C4N $,3.3 Estimated Install Time: 8 hrs Max Tire Size: 35x.50 Wheel Size: Facty and larger diameter Back Spacing: Facty less backspacing 304 Single Steering Stabilizer $57.49 NOTES (C4). Tsion bar un-loading tool required. Not designed f 4 do model Tahoe and Yukon 3. Requires exhaust modification to clear the front driveshaft 4. Requires frame bracket modification and differential mount modification 5. Models equipped with auto-trac may require a new front driveshaft. The auto-trac (New Process 46) transfer case can be identified by the badge on the rear of the transfer case that reads NP46. In addition, the dash mounted display will show the Auto 4WD symbol. (NP43 is not auto-trac) " TORSION BAR KEYS Kit# C0 99-998 $99.95 " LIFT KIT Kit# C 99-998 $49.95 (C0 & C) 460 ( req'd) $34.68 4608 ( req'd) $34.68 760 ( req'd) $4.50 7608 ( req'd) $4.50 NOTES (C0 & C). Tsion bar unloading tool required f installation. 3 BODY LIFT Kit# C937 99-994 $99.95 Kit# C936 995-998 $99.95 Class 0.9 Body Mount Bolts Are Included Front and Rear Bumper Relocation Steering Extension Included Radiat Relocation Brackets Included No Welding Required (C937 & C936) C999 Rear Bumper Relocation Bracket Kit $99.95 NOTES (C937 & C936). Optional rear bumper brackets are f appearances only. The rear bumper cannot be used f towing after installation.. The rear bumper brackets will not fit do models without modification. 3. Will not fit diesel applications. C640 C64 C64 C649 4600 4609 7600 7609 Box Kit of 3 Box Kit of 3 Box Kit 3 of 3 Rear Box Kit CHEVROLET/GMC 888-998-ZONE 33
CHEVROLET/GMC 998-004 S0/S5 BLAZER, JIMMY WD/4WD Kit# C9 $07.95 " BODY LIFTS Kit# C90 $07.95 Complete body lift to properly lift your S0/S5, Kits Include: crushproof body mount spacers and grade 0.9 hardware Front bumper relocation brackets Rear bumper relocation brackets Fuel filler hose extension Radiat relocation brackets. 998-004 S0/S5 PICKUP WD/4WD Installation skill level: 3 of 5 Estimated install time: 0 hrs Max tire size: 30x9.50 994-997 S0/S5 PICKUP WD/4WD Kit# C90 $76.95 NOTES (C9/C90/C90). The rear bumper relocation system is f appearance only. The rear bumper cannot be used f towing.. Vehicles equipped with vtec V6 will require modification of the air intake. 3. Will fit ZR models. 4. The 994 models will require steering extension part # C9807. Jobber: $8.95. 5. (C90) Rear bumper brackets will not fit stepside bed models. ZONEOFFROAD.COM 00-009 TRAILBLAZER/ENVOY (INCLUDING XL) 4WD 4. LITER " BODY LIFT Kit# C9 $368.46 This body lift is perfect to add that little extra tire clearance that you need. The system relocates the front and rear bumpers to maintain a facty look. Grade 0.9 body bolts are included along with Zone Offroad s Crush-Proof body blocks. Installation skill level: 3 of 5 Estimated install time: 4 to 6 hrs 34 NOTES (C9). System fits 4. Liter only. Min frame rail modification required f bumper relocation system. C9
973-987 500 PICKUP, BLAZER, JIMMY, SUBURBAN 4WD 6 C540 Front Sway Bar Shackle Link Kit -.5 eye-to-eye/shackle $46.95 C500 Transfer Case Drop $8.59 30 Single Steering Stabilizer $46.95 70 Single Steering Stabilizer (Black) $5.95 465 Auxiliary Front Hydro Shocks (reqd) $34.68 ea. 765 Auxiliary s (reqd) $4.50 ea. KIT NOTES (C9/C0). Some models may require the transfer case drop kit C500 listed in the accessies to alleviate driveshaft vibration.. The front driveshaft may be to be clearanced at the double cardan joint to prevent binding at full droop on some models. 3. The front exhaust cross-over pipe may need to be modified to clear the front driveshaft on some models. 4. Some models came equipped from the facty with a dual front shock setup, with the second set of shocks commonly being referred to as Auxiliary shocks. Optional Auxiliary shocks are available in both our hydro and nitro shocks. 4 C540 Front Sway Bar Shackle Link Kit -.5 eye-to-eye/shackle $46.95 30 Single Steering Stabilizer $46.95 70 Single Steering Stabilizer (Black) $5.95 465 Auxiliary Front Hydro Shocks (reqd) $34.68 ea. 765 Auxiliary s (reqd) $4.50 ea. KIT NOTES (C0/C). Some models came equipped from the facty with a dual front shock setup, with the second set of shocks commonly being referred to as Auxiliary shocks. If you prefer to retain the Auxiliary shocks, you must der the optional Auxiliary shocks offered under the Optional Accessies sections above. Optional Auxiliary shocks are available in both our hydro and nitro shocks. 6 SUSPENSION SYSTEM 6" Front Leaf Springs / 4" Block & AAL Kit # C9 977-87 Kit # C0 973-76 $599.95 Kit # C9N 977-87 Kit # C0N 973-76 $67.3 4" Front Leaf Springs / 4" Rear Blocks Kit # C0 977-87 Kit # C 973-76 $499.95 Kit # C0N 977-87 Kit # CN 973-76 $57.3 () () () () () () () () C060 C40 C40 C658 465 4639 765 7639 C040 C40 C40 460 4639 760 7639 Front Leaf Spring 77-87 Box Kit of 73-76 Box Kit of Add-a-leaf Kit This system comes complete with a 4 steering arm to yield the facty drag link angle, front and rear brake line relocation brackets, and front and rear yellow zinc plated u-bolts. The front is lifted with 6 leaf springs that utilize a 5-leaf design, anti-friction pads, and center leaf spacer plates, and the rear is lifted with a 4 block and an add-a-leaf. If your truck came with a front sway bar, check out the accessies f a unique shackle sway bar link design that fits lifts from -6. Estimated install time: 4 hrs Max tire size: 37x.50 Wheel size: 5x8 w/ 3.5 Backspacing 4 SUSPENSION SYSTEM Front Leaf Spring 77-87 Box Kit of 73-76 Box Kit of This system comes complete with a 4 steering arm to yield the facty drag link angle, front and rear brake line relocation brackets, and front and rear yellow zinc plated u-bolts. The front is lifted with 6 leaf springs that utilize a 5-leaf design, anti-friction pads, and center leaf spacer plates, and the rear is lifted with a 4 block and an add-a-leaf. If your truck came with a front sway bar, check out the accessies f a unique shackle sway bar link design that fits lifts from -6. Estimated install time: 3-4 hrs Max tire size: 35x.50 Wheel size: 5x8 w/ 3.5 Backspacing CHEVROLET/GMC 888-998-ZONE 4 Lift Kit - 35x.50 Mastercrafts - 5x0 ARs 35
CHEVROLET/GMC 973-987 500 PICKUP, BLAZER, JIMMY, SUBURBAN 4WD 6 SUSPENSION SYSTEM 6" Front Leaf Springs / 4" Block & AAL Kit # C 977-87 Kit # C3 973-76 $599.95 Kit # CN 977-87 Kit # C3N 973-76 $67.3 () () () () C060 C4 C4 C658 465 4639 765 7639 Front Leaf Spring 77-87 Box Kit of 73-76 Box Kit of Add-a-leaf Kit This system comes complete with a 4 steering arm to yield the facty drag link angle, front and rear brake line relocation brackets, and front and rear yellow zinc plated u-bolts. The front is lifted with 6 leaf springs that utilize a 5-leaf design, anti-friction pads, and center leaf spacer plates, and the rear is lifted with a 4 block and an add-a-leaf. If your truck came with a front sway bar, check out the accessies f a unique shackle sway bar link design that fits lifts from -6. Estimated install time: 4 hrs Max tire size: 37x.50 Wheel size: 5x8 w/ 3.5 Backspacing 6 C540 Front Sway Bar Shackle Link Kit -.5 eye-to-eye/shackle $46.95 C500 Transfer Case Drop $8.59 30 Single Steering Stabilizer $46.95 70 Single Steering Stabilizer (Black) $5.95 465 Auxiliary Front Hydro Shocks (reqd) $34.68 ea. 765 Auxiliary s (reqd) $4.50 ea. KIT NOTES (C/C3). Some models may require the transfer case drop kit C500 listed in the accessies to alleviate driveshaft vibration.. The front driveshaft may be to be clearanced at the double cardan joint to prevent binding at full droop on some models. 3. The front exhaust cross-over pipe may need to be modified to clear the front driveshaft on some models. 4. Some models came equipped from the facty with a dual front shock setup, with the second set of shocks commonly being referred to as Auxiliary shocks. Optional Auxiliary shocks are available in both our hydro and nitro shocks. 4 SUSPENSION SYSTEM 4" Front Leaf Springs / 4" Rear Blocks Kit # C6 977-87 Kit # C7 973-76 $499.95 Kit # C6N 977-87 Kit # C7N 973-76 $57.3 () () () () C040 C4 C4 460 4639 760 7639 Front Leaf Spring 77-87 Box Kit of 73-76 Box Kit of ZONEOFFROAD.COM This system comes complete with a 4 steering arm to yield the facty drag link angle, front and rear brake line relocation brackets, and front and rear yellow zinc plated u-bolts. The front is lifted with 4 leaf springs that utilize a 5-leaf design, anti-friction pads, and center leaf spacer plates, and the rear is lifted with a 4 block. If your truck came with a front sway bar, check out the accessies f a unique shackle sway bar link design that fits lifts from -6. Estimated install time: 3-4 hrs Max tire size: 35x.50 Wheel size: 5x8 w/ 3.5 Backspacing 4 C540 Front Sway Bar Shackle Link Kit -.5 eye-to-eye/shackle $46.95 30 Single Steering Stabilizer $46.95 70 Single Steering Stabilizer (Black) $5.95 465 Auxiliary Front Hydro Shocks (reqd) $34.68 ea. 765 Auxiliary s (reqd) $4.50 ea. KIT NOTES (C6/C7). Some models came equipped from the facty with a dual front shock setup, with the second set of shocks commonly being referred to as Auxiliary shocks. If you prefer to retain the Auxiliary shocks, you must der the optional Auxiliary shocks offered under the Optional Accessies sections above. Optional Auxiliary shocks are available in both our hydro and nitro shocks. 36 6 Lift Kit - 37x.50 MTZs - 7x9 XD Addicts
988-99 500 PICKUP, BLAZER, JIMMY, SUBURBAN 4WD 6 C540 Front Sway Bar Shackle Link Kit -.5 eye-to-eye/shackle $46.95 C500 Transfer Case Drop $8.59 30 Single Steering Stabilizer $46.95 70 Single Steering Stabilizer (Black) $5.95 465 Auxiliary Front Hydro Shocks (reqd) $34.68 ea. 765 Auxiliary s (reqd) $4.50 ea. 6 SUSPENSION SYSTEM 6" Front Leaf Springs / 4" Block & AAL Kit # C $599.95 Kit # CN $67.3 KIT NOTES (C). Some models may require the transfer case drop kit C500 listed in the accessies to alleviate driveshaft vibration.. The front driveshaft may be to be clearanced at the double Cardan joint to prevent binding at full droop on some models. 3. The front exhaust cross-over pipe may need to be modified to clear the front driveshaft on some models. 4. Some models came equipped from the facty with a dual front shock setup, with the second set of shocks commonly being referred to as Auxiliary shocks. If you prefer to retain the Auxiliary shocks, you must der the optional Auxiliary shocks offered under the Optional Accessies sections above. Optional Auxiliary shocks are available in both our hydro and nitro shocks. 4 C540 Front Sway Bar Shackle Link Kit -.5 eye-to-eye/shackle $46.95 30 Single Steering Stabilizer $46.95 70 Single Steering Stabilizer (Black) $5.95 465 Auxiliary Front Hydro Shocks (reqd) $34.68 ea. 765 Auxiliary s (reqd) $4.50 ea. 4" Front Leaf Springs / 4" Rear Blocks Kit # C5 $499.95 Kit # C5N $57.3 () () () () C060 C403 C658 465 4639 765 7639 C040 C403 460 4639 760 7639 Front Leaf Spring Box Kit Add-a-leaf Kit This system comes complete with a 4 steering arm to yield the facty drag link angle, front and rear brake line relocation brackets, and front and rear yellow zinc plated u-bolts. The front is lifted with 6 leaf springs that utilize a 5-leaf design, anti-friction pads, and center leaf spacer plates, and the rear is lifted with a 4 block and an add-a-leaf. If your truck came with a front sway bar, check out the accessies f a unique shackle sway bar link design that fits lifts from -6. Estimated install time: 4 hrs Max tire size: 37x.50 Wheel size: 5x8 w/ 3.5 Backspacing 4 SUSPENSION SYSTEM KIT NOTES (C5). Some models came equipped from the facty with a dual front shock setup, with the second set of shocks commonly being referred to as Auxiliary shocks. If you prefer to retain the Auxiliary shocks, you must der the optional Auxiliary shocks offered under the Optional Accessies sections above. Optional Auxiliary shocks are available in both our hydro and nitro shocks. Front Leaf Spring Box Kit This system comes complete with a 4 steering arm to yield the facty drag link angle, front and rear brake line relocation brackets, and front and rear yellow zinc plated u-bolts. The front is lifted with 4 leaf springs that utilize a 5-leaf design, anti-friction pads, and center leaf spacer plates, and the rear is lifted with a 4 block. If your truck came with a front sway bar, check out the accessies f a unique shackle sway bar link design that fits lifts from -6. Estimated install time: 3-4 hrs Max tire size: 35x.50 Wheel size: 5x8 w/ 3.5 Backspacing CHEVROLET/GMC 888-998-ZONE 4 Lift Kit - 33x.50 BFG A/T - 5x0 ARs 37
CHEVROLET/GMC 988-99 500 PICKUP, BLAZER, JIMMY, SUBURBAN 4WD 6 SUSPENSION SYSTEM 6" Front Leaf Springs / 4" Block & AAL Kit # C4 $599.95 Kit # C4N $67.3 () () C060 C43 C658 465 4639 765 7639 Front Leaf Spring Box Kit Add-a-leaf Kit This system comes complete with a 4 steering arm to yield the facty drag link angle, front and rear brake line relocation brackets, and front and rear yellow zinc plated u-bolts. The front is lifted with 6 leaf springs that utilize a 5-leaf design, anti-friction pads, and center leaf spacer plates, and the rear is lifted with a 4 block and an add-a-leaf. If your truck came with a front sway bar, check out the accessies f a unique shackle sway bar link design that fits lifts from -6. Estimated install time: 4 hrs Max tire size: 37x.50 Wheel size: 5x8 w/ 3.5 Backspacing 6 C540 Front Sway Bar Shackle Link Kit -.5 eye-to-eye/shackle $46.95 C500 Transfer Case Drop $8.59 30 Single Steering Stabilizer $46.95 70 Single Steering Stabilizer (Black) $5.95 465 Auxiliary Front Hydro Shocks (reqd) $34.68 ea. 765 Auxiliary s (reqd) $4.50 ea. KIT NOTES (C4). Some models may require the transfer case drop kit C500 listed in the accessies to alleviate driveshaft vibration.. The front driveshaft may be to be clearanced at the double Cardan joint to prevent binding at full droop on some models. 3. The front exhaust cross-over pipe may need to be modified to clear the front driveshaft on some models. 4. Some models came equipped from the facty with a dual front shock setup, with the second set of shocks commonly being referred to as Auxiliary shocks. If you prefer to retain the Auxiliary shocks, you must der the optional Auxiliary shocks offered under the Optional Accessies sections above. Optional Auxiliary shocks are available in both our hydro and nitro shocks. 4 SUSPENSION SYSTEM 4" Front Leaf Springs / 4" Rear Blocks Kit # C8 $499.95 Kit # C8N $57.3 () () C040 C43 460 4639 760 7639 Front Leaf Spring Box Kit ZONEOFFROAD.COM This system comes complete with a 4 steering arm to yield the facty drag link angle, front and rear brake line relocation brackets, and front and rear yellow zinc plated u-bolts. The front is lifted with 4 leaf springs that utilize a 5-leaf design, anti-friction pads, and center leaf spacer plates, and the rear is lifted with a 4 block. If your truck came with a front sway bar, check out the accessies f a unique shackle sway bar link design that fits lifts from -6. Estimated install time: 3-4 hrs Max tire size: 35x.50 Wheel size: 5x8 w/ 3.5 Backspacing 4 C540 Front Sway Bar Shackle Link Kit -.5 eye-to-eye/shackle $46.95 30 Single Steering Stabilizer $46.95 70 Single Steering Stabilizer (Black) $5.95 465 Auxiliary Front Hydro Shocks (reqd) $34.68 ea. 765 Auxiliary s (reqd) $4.50 ea. KIT NOTES (C8). Some models came equipped from the facty with a dual front shock setup, with the second set of shocks commonly being referred to as Auxiliary shocks. If you prefer to retain the Auxiliary shocks, you must der the optional Auxiliary shocks offered under the Optional Accessies sections above. Optional Auxiliary shocks are available in both our hydro and nitro shocks. 38 6 Lift Kit - 37 Nitto M/T Tires - 7 Method Race Wheels
" LEVELING KIT Kit# C5 $99.95 00% resonant frequency tested to ensure a solid casting. CNC Machined to ensure the proper amount of lift f your vehicle. Made in the U.S.A. Easy installation Includes front shock spacers to re-gain wheel travel. Installation Skill Level: of 5 Estimated install time: hr Max tire size: 33x.50R6 Wheel size: Stock Backspacing: Stock HUMMER 005-00 HUMMER H3/H3T 4WD 46 ( req d) $34.68 76 ( req d) $4.50 CHEVROLET/GMC 888-998-ZONE Leveling Kit - 33 Bridgestones - 8x9 Eagle 78s 39