Burkert: The Global Supplier of Customized Fluid Control Solutions

Burkert: The Global Supplier of Customized Fluid Control Solutions With unmatched Reduction of Total Cost of Ownership Innovative LINK and NET Technology 50 subsidiaries worldwide What is it that makes Burkert a global supplier of Customized Fluid Control Systems and Solutions? It is the combination of innovative technology and a convincing philosophy. Burkert puts its motto Easy into practice. With intelligent products and systems solutions, the Easy technology makes it easy to control flow, level, analysis, pressure or temperature. Process knowledge, coupled with the systems and the knowhow of Burkert s engineers, results in economical controls in virtually all applications. Burkert s services range from application and system engineering through support during installation and commissioning, up to after sales service and hotline assistance. The sensor, valve and controller systems are completely pre-assembled, ready for immediate installation and operation. full system integration by Easy LINK and full communication capability by Easy NET for flow, level, analytical, pressure and temperature control. Easy LINK conforms to the principle of Decentralized Intelligence in the automated process, whereby each loop has its own control and communication intelligence. Decentralized Intelligence means combining the controller with either the valve or the sensor. This concept allows Easy LINK to be applied with most of the usual and proven technologies (analog, frequency, binary and relay). The choice of technology depends on the control method used: Monitoring, ON/OFF, Continuous Solenoid or Continuous Pneumatic Control. Burkert serves a multitude of diversified markets that include food & beverage, water treatment, textiles, pulp & paper, fine chemicals, pharmaceuticals and semi-conductors. Burkert s strength also lies in engineering analytical and medical devices. More than 20 new systems and products are introduced in this wide range of markets every year. Thus Burkert has made a name for itself as the most dynamic and innovative systems developer in the industry. The Easy Technology Burkert is the only company able to offer customers complete Fluid Control Solutions which are based on Easy LINK is effecting a more reliable process, more efficient process data communication and notably reduced Total Cost of Ownership. Thus Easy LINK is the simplest and best adapted pointto-point connection between sensor and valve. The innovative Easy NET system permits sensors, valves and controllers to communicate with a higher automation level via binary and analog signals as well as fieldbusses: PROFIBUS, DeviceNet, INTERBUS and AS-Interface. The process valves with integrated PID controllers and fieldbus interfaces enable the most efficient

communication to a PLC. The Easy NET technology makes it possible to transmit external set points, process values, diagnosis signals and control commands. Control Systems are basically differentiated into ON/OFF, Continuous Solenoid and Continuous Pneumatic Control Systems. For all these systems Burkert has the appropriate sensor, valve and controller technologies, perfectly suited for all liquids or gases to be controlled - whether pure, viscous, lubricated or particle loaded fluids. The choice of control method is determined by the process accuracy demanded. Usually the Total Cost of Ownership is dominated by hidden but very timeconsuming work such as installation, programming, testing and maintenance. The innovative Easy System of Burkert reduces this additional work to a minimum, resulting in a fraction of the previous cost and generating an unbeatable low Total Cost of Ownership for the customer. Burkert s Customized Fluid Control Solutions: - to order - to install - to commission - to operate - to maintain - to service

Analytical Valve Systems Burkert offers a wide range of Analytical Valve Systems in several industrial fields that have been specially developed for high demands and are produced under clean-room conditions. The materials utilized guarantee first class quality and reliability. The dead volume free design ensures a process without any entrainment. A diaphragm provides perfect separation of fluid and valve mechanics. A new and revolutionary MICRO System for nano-liter dispensing has been introduced in the market. This Customized Fluid Control System is based on a unique combination of micro system technology flow sensor and micro flipper solenoid valve with isolating diaphragm. Local service teams consult and support customers during engineering of Customized Analytical Valve Systems mounted on a customized manifold with integrated piping. That results in an optimized Total Cost of Ownership. Pre-assembly and testing is another good reason for confiding in the skillful experts of Burkert. Solenoid Valve Systems Solenoid Valve Systems from Burkert are suited to operate with neutral, aggressive and contaminated fluids, steam and other high temperature media. For contaminated media Burkert offers solenoid valves with isolating diaphragms. The spectrum of products ranges up to Solenoid Valve Systems with integrated flow sensors. Universal solenoid valves are available as top quality single devices made of stainless steel, brass or plastic that can be utilized for various purposes. A wide range of seal materials has been proven to use with acids, lyes, corrosive and toxic fluids. Water valves are developed in a compact and water hammer free design. To protect against explosion Burkert has introduced several Solenoid Valve Systems with special approvals in the market. The sophisticated Easy LINK technology connects the solenoid valve to an intelligent sensor and allows the direct control of the valve. Burkertś Customized Solenoid Valve Systems are pre-assembled and tested. Sensor/Instrumentation and Controller Systems Burkert s easy to handle Sensor and Controller Systems have proven their outstanding performance all over the world. The Burkert product program contains sensor/ switches and transmitters for flow, level, analysis, pressure and temperature. Controller systems are available for batch, ph control and chlorine control. Easy LINK technology makes it possible to connect the sensor/switches and transmitters to valves or controllers forming high-performance systems with Decentralized Intelligence. The Sensor and Controller Systems from Burkert optionally include a fieldbus interface and allow compatibility to a higher automation level via Easy NET.

Process Actuation Systems The broad product range of Burkert Process Actuation Systems varies from pneumatic single pilot valves through valve islands up to the Remote Process Actuation Control System AirLINE suitable to control even complex applications. Banjo valves are designed for direct and quick mounting onto pneumatic actuators for the process industry. Special types of Process Actuation Systems have NAMUR connections ensuring easy assembly on different pneumatic actuators. The unique Remote Process Actuation Control System AirLINE offers any combination of valve island functionality, electronic I/O modules and fieldbus connectivity in a very compact and revolutionary design even with integrated Mini PLC. The field of explosion protection is another important application area of Process Actuation Systems. Various types of protection are available. The unique Easy LINK and Easy NET technology permits connection to an intelligent sensor and a higher automation level, respectively. Process Valve Systems The spectrum of Process Valve Systems is capacious: it contains angle seat valves, globe valves, diaphragm and quarter-turn valves which are actuated in pneumatic, electrical or manual manner. Burkert Process Valve Systems are obtainable for ON/OFF and Continuous Control. TOP and SIDE Control units with Decentralized Intelligence are designed to be combined with almost every process valve. They have an integrated positioner and a PID controller which can be connected via Easy LINK to a sensor. The advantages are obvious: programmable flow characteristics, low wiring costs and improved communication methods resulting in an optimized Total Cost of Ownership. Easy NET integrates the system to the next higher automation level. The Intelligent Sensors ALL IN ONE set new standards in Indication, Monitoring, Transmitting and ON/OFF Control - and can be obtained for flow, analytical, pressure and temperature control. The user-friendly large display indicates the process value in digits and as a scalable bar graph. The process value is measured and transmitted to a controller via Easy LINK. Freely programmable switching points can be defined both in hysteresis and window mode over the entire measuring range for monitoring. ON/OFF Control enables the entry of internal and external set point values and in addition permits communication with analog output signals to an external PLC. Remote operation allows separating display and sensor unit.

SELECTION CHART to select Gases Liquids Sensor Systems 2/2-Way 3/2-Way 2/2-Way Port connection [inch] Orifice [inch] Pressure [psig] Compressed air Dry air Neutral gases Water Hotwater up to 120 o C Demineralized water Slightly dirty fluids Slightly aggressive Aggressive fluids Steam Miniature, direct acting Compact, direct acting Zerodifferential pressure Servo- Assisted Angle-Seat Isolating Diaphragm Miniature, direct acting Compact, direct acting Isolating Diaphragm Ball Valves Electrically Pneumatically Angle-Seat Globe Valve Control Valve Diaphragm Manually Pneumatically Pilots SOLENOID VALVE SYSTEMS 1/8 1/16-3/32 0-170 1/8-3/8 5/64-1/4 0-355 1/4 5/64-1/8 0-230 1/4-3/8 1/8-1/4 0-140 1/4-1 3/8-3/4 0-140 3/8-2 3/8-11/2 0-140 1/2-1 1/2-1 0-140 3/8-1 3/8-3/4 2.8-140 1/2-2 1/2-2 2.8-230 1/2-2 1/2-2 2.8-140 1/2-1 7/16-1 14-700 3/8-1 7/16-9/16 0-150 1/4 1/8-5/32 0-170 1/2-2 1/2-2 2.8-140 1/8 3/64-1/16 0-140 1/8-1/4 5/64-7/64 0-140 1/4 5/64-1/8 0-170 PROCESS VALVES 1/4-1 1/2 3/8-11/2 0-230 1/4-1 1/2 3/8-11/2 0-230 3/8-3/4 1/2-3/4 0-230 1/2-2 1/2 1/2-21/2 0-230 Flange 1/2-2 0-230 1/2-2 1/2-2 0-230 1/4-2 1/4-2 0-145 1/4-2 1/4-2 0-145 1/4, NAMUR 3/64-1/4 0-230 Page Page Page 8 8 8 9 9 21 30 30 31 31 31 32 32 33 33 34 34 38 42 42 42 44 44 44 48 48 48 50 50 50 9 11 12 14 14 18 16 17 20 26 27 27 27 21-22 29 28 29 29 30 31 31 31 13 13 13 13 29 28 29 29 32 32 33 36 35 35 35 35 38 38 38 38 38 40 40 40 40 40 42 42 42 42 42 42 42 44 44 46 44 44 44 46 48 48 48 48 50 50 50 50 53,54 53,54 53,54 53,54 53,54 53,54 55,56 55,56 55,56 55,56 55,56 57-59 57-59 57-59 SENSORS/TRANSMITTERS/BATCH CONTROL Flow Control Flow Sensor/Switch for Easy ON/OFF Control Flow Sensor/Transmitter for Continuous Control Magmeter Analytical Control Inductive Conductivity Transmitter Temperature Control Temperature Sensor/Switch for Easy ON/OFF Control Pressure Control Pressure Sensor/Switch for Easy ON/OFF Control Level Control Ultrasonic Level Transmitter 60 62 62 64,66 65,68 65,68 70 70 70 72 72 72 72 72 74 74 74 74 74 76 76 76 76 79 79 79 79 79

SELECTION GUIDE 2/2-Way Solenoid Valve Systems Miniature, direct acting 8 Compact, direct acting 9... 14 Zero-differential pressure 16... 20 Servo-Assisted 21... 30 Angle-Seat 31 Isolating Diaphragm 13 3/2-Way Solenoid Valve Systems Miniature, direct acting 32 Compact, direct acting 33,36 Isolating Diaphragm 34... 35 Quality Certificates Explosion protection to Eurostandard Underwriters Laboratories Canadian Standard Association European Community Process Valves Ball Valves 38... 41 Angle-Seat 42... 46 Globe Valve 48... 49 Control Valve 50... 51 Isolating Diaphragm 53... 56 Pilots 57... 59 Sensor Systems Flow Control 60... 71 Analytical Control 72... 73 Temperature Control 74... 75 Pressure Control 76... 77 Level Control 78... 79 Accessories Timer; Cable Plugs 80... 81 Quality System ISO 9001 Technical Information 82 Type specification in 83 numeric order Burkert International 87

Miniature Solenoid Valve with threaded port connection 2/2-Way, Miniature Normally closed 6011 2/2-Way, NPT 1 /8, 0-170 psig Coil can be changed easily with valve in place Coil can be locked in 4x90 o positions or move freely between positions, as required 6011 High-quality FPM seal material standard Direct acting. Brass body valve for neutral gases and liquids such as compressed air, water, hydraulic oil. Stainless steel valve for more difficult and slightly aggressive media. Suitable for technical vacuum. Pressure range 0-170 psig, max. -10 o C... +100 o C +55 o C, max. Brass, stainless steel FPM Coil material Polyamide Power consumption DC: 4 W AC: 9 VA (inrush), 6 VA (hold) IP 65 (standard delivery: cable plug cable plug DIN 43 650 C, 0-250 V) Options - Wide range of cable plug options Type 2506 with LED and varistor (see page 81) 2.99 1.95 1.17 4 x M3 6 depth 0.79 0.77 1.14 0.13 1.27.79.32.32.99.16.58 NPT/8 A/F.49.62.55.34.41 1.19.55 with standard-cable plug 0-250 V AC/DC Port Orifice Cv Pressure Range Weight connection (AC) (DC) [inch] [inch] [PSI] [PSI] [oz.] Brass valve body NPT 1/8 1/16 0.07 0-170 0-85 4.62 NPT 1/8 5/64 0.13 0-115 0-65 4.62 NPT 1/8 3/32 0.15 0-85 0-42 4.62 Stainless steel valve body NPT 1/8 1/16 0.07 0-170 0-85 4.62 NPT 1/8 5/64 0.13 0-115 0-65 4.62 NPT 1/8 3/32 0.15 0-85 0-42 4.62 24 V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz Brass valve body 456 780 D 456 781 S 456 782 T 456 783 U 456 784 V 456 785 W 456 786 X 456 787 Y 456 788 H 456 789 A 456 790 F 456 791 U Stainless steel valve body 457 151 T 457 152 U 457 153 V 457 154 W 457 155 X 457 156 Y 457 157 Z 457 158 A 457 159 B 457 160 G 457 161 V 457 162 W 8

Compact Solenoid Valve for neutral gases and liquids Normally closed 6013 2/2-Way, NPT 1 /8 to NPT 3 /8, 0-355 psig Coil can be changed easily with valve in place Coil can be locked in 4x90 o positions or move freely between positions, as required 2/2-Way, Compact Modular direct acting solenoid valve system with brass body. Ideal for neutral gases and liquids such as compressed air, natural gas, water, hydraulic oil. Suitable for technical vacuum. High-quality FKM seal material standard 6013 Pressure range 0 to 355 psig, max. +14 o F... +212 o F +131 o F, max. Brass FKM Coil material Polyamide Power consumption DC: 8 W 10W (34VA, 14VA) AC: 24 VA(inrush),17 VA(hold) NEMA 4 (standard delivery: cable plug cable plug DIN 43650A) Options - s - Explosion Proof CSA Class 1 Div1 Class H Coil Variable dimensions [inch] A B C D E F Threaded port NPT 1/8 1.26 0.82 1.28 1.10 1.62 Threaded port NPT 1/4 1.81 1.06 1.93 1.26 1.77 with standard cable plug 0-250 V AC/DC Port Orifice Cv Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [oz.] NPT 1/8 5/64 0.14 0-355 0-170 12.69 NPT 1/8 7/64 0.19 0-230 0-140 12.69 NPT 1/8 1/8 0.27 0-140 0-85 12.69 NPT 1/4 1/8 0.27 0-140 0-85 16.39 NPT 1/4 5/32 0.35 0-55 0-20 16.39 NPT 3/8 1/8 0.27 0-200 0-115 16.39 24 V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz 457 294 T 457 295 U 457 296 V 457 297 W 457 298 F 457 299 G 457 300 M 457 301 A 456 315 W 456 316 X 456 317 Y 456 318 H 456 319 A 456 320 F 456 321 U 456 322 V 456 323 W 456 324 X 456 325 Y 456 326 Z 456 840 H 456 841 W 456 842 Y 456 843 Y 9

Customized Solenoid Valve Systems Fluid Control Solutions Wide product range for neutral and difficult media Customized, pre-assembled and tested systems High reliability and safety in operation Monitoring and ON/OFF Control with LINK Intelligent Sensor/Switch ALL IN ONE with outstanding Human-Machine Interface sets new standards in Easy LINK allows the direct control of a solenoid valve, a process valve or other devices. Easy LINK connection leads to unmatched economical solutions for any measuring parameter. Easy NET integrates the intelligent sensor in fieldbus configurations (e.g. AS-Interface). Indication Monitoring Transmitting ON/OFF Control 10

Compact Solenoid Valve for more difficult and slightly aggressive media Normally closed 6013 2/2-Way, NPT 1 /8 - NPT 1 /4, 0-355 psig Medium is only in contact with the valve internals and body High-quality FKM seal material as standard 2/2-Way, Compact Modular, direct acting solenoid valve system. Stainless steel body for more aggressive media. Suitable for technical vacuum. Pressure range 0-355 psig, max. +14 o F... +212 o F +131 o F, max. Stainless steel FKM Coil material Polyamide Power consumption DC: 8 W AC: 24 VA(inrush),17 VA(hold) NEMA 4 (standard delivery: cable plug cable plug DIN 43650A) Options - LED cable plug - Haz-EX CSA Class 1 Div1 H rated coil Coil can be changed easily with valve in place 6013 Variable dimensions [inch] A B C D E F Threaded port NPT 1/8 1.26 0.82 1.28 1.10 1.62 Threaded port NPT 1/4 1.26 1.06 1.28 1.26 1.77 Threaded port NPT 1) 1/4 1.81 1.06 1.93 1.26 1.77 1) Only for version NPT 1/4, orifice 5/32 with H conduit plug 0-250 V AC/DC Port Orifice Cv Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [oz.] NPT 1/8 5/64 0.14 0-355 0-170 12.16 NPT 1/4 5/64 0.27 0-140 0-85 12.16 NPT 1/4 1/8 0.27 0-140 0-85 15.68 NPT 1/4 1) 5/32 0.35 0-55 0-20 15.68 1) Only for version NPT 1/4, orifice 5/32 11 24 V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz 457 302 B 457 303 C 457 304 D 457 305 E 457 306 F 457 307 G 457 308 R 457 309 J 456 335 S 456 336 T 456 337 U 456 338 D 456 494 K 1) 456 495 L 1) 456 496 M 1) 456 497 N 1)

Solenoid Valve for steam and media at high temperatures up to 356 o F 2/2-Way, Compact 6013 Normally closed 6013 Modular direct acting solenoid valve system with brass body and stainless steel seat. For neutral gases and liquids, high temperatures such us hot water, steam, hot air, thermal oils. Applications: heating, sterilizing, impregnating. Pressure range 0-230 psig, max. (max. steam pressure is 140 PSI @ 356 o F) 14 o F... +356 o F +130 o F, max. Brass Seat material Stainless steel PTFE/Graphite Coil material Epoxy Power consumption 32 mm coil: DC: 8 W AC: 24 VA(inrush),17 VA(hold) 40 mm coil: DC: 10 W AC: 30 VA(inrush),22 VA(hold) IP 65 (standard delivery: cable plug cable plug DIN 43 650 A) Options - Version up to 250 o F with Epoxy coil and EPDM seal - LED cable plug - Haz-Ex CSA Class 1 Div.1 2/2-Way, NPT 1 /4, 0-230 psig Fluid temperature up to 356 o F Erosion resistant, st.steel seat High-quality seal material PTFE standard Media is only in contact with the valve internals and body Variable dimensions [inch] Coil A B C D E F 1.26" mm NPT 1/4 1.81 1.06 1.93 1.26 1.77 1.58" mm NPT 1/4 1.81 1.06 1.93 1.58 2.01 Port Orifice Cv Pressure Range Weight connection (AC) (DC) [inch] [inch] [PSI] [PSI] [oz.] NPT 1/4 5/64 0.14 0-230 0-170 12.70 NPT 1/4 1/8 0.27 0-200 0-115 12.70 with standard-cable plug 0-250 V AC/DC 24/DC 24/60 120/60 240/60 457 376 C 1) 457 377 D 1) 457 378 N 1) 457 379 P 1) 457 380 D 2) 457 381 S 2) 457 382 T 2) 457 383 U 2) 1) 1.26" coil, 8W; 2) 1.58" coil, 10W 12

Solenoid Valve with Isolating Diaphragm; for neutral, aggressive, slightly contaminated fluids Normally closed Normally open 330 2/2-Way, NPT 1 /4, 0-140 psig Separating diaphragm isolates solenoid system from operating fluid Long service life, even in nonlube conditions Insensitive to slightly contaminated fluids 2/2-Way, Isolating diaphragm 330 Direct acting valve with pivoted armature. The unique valve design hermetically isolates the actuator from the fluid. Making it less sensitive to contaminated fluids than a plungertype system and provides a long service life, even in unlubricated applications. Pressure range 0-140 psig, max. +14 o F... +194 o F +131 o F, max. Brass, stainless steel FPM Coil material Epoxy Power consumption DC: 8 W AC: 30 VA(inrush), 15 VA(hold) IP 65 (standard delivery: cable plug cable plug DIN 43 650 A, 0-250 V) Options - EPDM seal - Vacuum - Electrical feedback signaller 1060 - Impulse coil (zero watt coil) 3.94 2.80 0.35 NPT 1/4 1.34 0.94 0.35 0.35 1.50 1.81 with standard-cable plug 0-250 V AC/DC Port Orifice Cv 1) Pressure Range Weight connection (AC) (DC) [inch] [inch] [PSI] [PSI] [oz.] Brass valve body (normally closed) NPT 1/4 1/8 0.27 0-140 0-140 14.1 NPT 1/4 5/32 0.33 0-70 0-70 14.1 Stainless steel valve body (normally closed) NPT 1/4 1/8 0.27 0-140 0-140 14.1 NPT 1/4 5/32 0.33 0-70 0-70 14.1 Brass valve body (normally open) NPT 1/4 1/8 0.27 0-140 0-140 14.1 NPT 1/4 5/32 0.33 0-70 0-70 14.1 Stainless steel valve body (normally open) NPT 1/4 1/8 0.27 0-140 0-140 14.1 NPT 1/4 5/32 0.33 0-70 0-70 14.1 1) Flow rate reduced 20% with DC-current operation Voltage / Frequency [V/Hz] 24/DC 24/60 120/60 240/60 Brass valve body (normally closed) US 08 967 US 08 966 US 08 965 US 08 964 US 08 963 US 08 962 US 08 961 US 08 960 Stainless steel valve body (normally closed) 457 687 V US 08 959 457 688 E 457 689 F 457 693 T US 08 958 457 694 U 457 695 V Brass valve body (normally open) 458 947 A 458 948 K 458 949 L 458 950 R 458 951 E 458 952 F 458 953 G 458 954 H Stainless steel valve body (normally open) 458 959 N 458 960 K 458 961 G 458 962 H 458 963 A 458 964 B 458 965 C 458 966 D 13

Solenoid Valve for 150# Steam and 356 F Neutral Fluids 2/2-Way, Compact 255 Normally closed Direct acting solenoid valve system. For neutral gases and liquids, high temperature fluids such as hot water, steam, hot air and thermal oils. Applications: heating, sterilizing. 255 2/2-Way, NPT 1 /4 - NPT 3 /8, 0-230 psig Fluid temperature up to 356 o F Metal seal between coil and valve body Stainless steel seat eliminates danger of erosion and dezincification Pressure range Coil material Power consumption cable plug Options - High temperature version up to 480 F - 1/32 orifice for high pressure to 1400 psig 0-230 psig, max. -40 o F... max. steam +356 o F +131 o F, max. Brass, stainless steel PTFE Epoxy DC: 12 W AC: 35 to 40 VA (inrush) IP65 (standard delivery: H conduit plug) Dimensions: Brass version with standard cable plug 0-250 V AC/DC Port Orifice Cv Pressure R. Material Weight connect. (AC) (DC) 1) Body Seal [Inch] [inch] [PSI] [PSI] [lb.] NPT 1/4 1/8 0.29 230 140 Brass PTFE 1.5 NPT 1/4 1/8 0.29 230 140 St.Steel PTFE 1.5 NPT 1/4 5/32 0.58 140 55 Brass PTFE 1.5 NPT 1/4 5/32 0.58 140 55 St.Steel PTFE 1.5 NPT 1/4 1/4 0.93 55 14 Brass PTFE 1.5 NPT 1/4 1/4 0.93 55 14 St.Steel PTFE 1.5 NPT 3/8 1/8 0.29 230 140 Brass PTFE 1.5 NPT 3/8 5/32 0.58 140 55 Brass PTFE 1.5 NPT 3/8 1/4 0.93 55 14 Brass PTFE 1.5 1) Dependent from media temperature 14 24 V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz 452 431 P 452 432 Q 452 433 R 452 434 J 452 435 K 452 436 L 452 437 M 452 438 W 452 439 X 450 503 A 452 440 C 452 441 Z 452 442 S 452 443 T 452 444 U 452 445 V 452 454 W 452 455 X 452 456 Y 452 457 Z 452 458 A 452 459 B 452 460 G 452 461 V on request CD 0058 K 454 096 M CD 00582 on request CD 0140 V 454 121 J 456 014 L CD 0014 P 456 736 U 453 733 W CD 00584

Water Valve Systems for ON/OFF Control Complete program of high reliability water valves with options for Diagnostic and Insensitive to slightly contaminated and aggressive fluids due to separating diaphragm Waterhammer-free Operating as from zero pressure Monitoring due to integrated flow / no flow sensor ON/OFF Control with LINK NET with AS-Interface connectivity 15

Zero-differential Pressure 6213 Solenoid Valve for clean neutral liquids up to 194 o F Normally closed 6213 2/2-Way, NPT 1 /4 - NPT2, 0-140 psig Zero differential pressure High reliability Waterhammer-free Compact design with high flow rates Modular, servo-assisted solenoid valve system. Operates with zero pressure differential. For clean neutral liquids such as water and oils. Pressure range Coil material 0-140 psig, max. +14 o F... +194 o F +131 o F, max. Brass NBR Polyamide Power consumption DC: 10 W (Orifice 1/4,3/8,1/2,3/4) AC: Orifice [inch] 3/8 1/2 3/4 1 11/2 Inrush [VA] 34 36 38 160 202 Hold [VA] 14 14 14 38 38 Hold [W] 8 8 8 18 18 IP65 (standard delivery: cable plug cable plug DIN 43650A) Variable dimensions [inch] - AC-Version Port Conn. Orifice [Inch] [inch] C D E F L A/F A B H I K 1/4, 3/8 3/8 1.48 1.50 0.79 0.41 1.97 1.06 2.68 3.23 1.26 0.81 1.77 1/2 1/2 1.77 1.99 0.95 0.54 2.29 1.26 3.13 3.76 1.26 0.81 1.77 3/4 3/4 2.60 2.60 1.38 0.55 3.15 1.62 3.74 4.55 1.26 0.81 1.77 1 1 4.12 4.12 2.72 0.66 3.74 1.62 5.44 6.24 1.93 0.97 2.32 1 1/4 1 4.12 4.12 2.72 0.68 3.74 1.97 5.44 6.42 1.93 0.97 2.32 1 1/2 1 1/2 4.12 4.12 2.72 0.68 5.20 2.36 5.89 7.07 1.93 0.97 2.32 2 1 1/2 4.12 4.12 2.72 0.69 5.20 2.76 5.89 7.27 1.93 0.97 2.32 Variable dimensions [inch] - DC-Version Port Conn. Orifice [Inch] [inch] C D E F L A/F A B H I K 1/4, 3/8 3/8 1.48 1.50 0.79 0.41 1.97 1.06 2.70 3.25 1.58 0.93 2.01 1/2 1/2 1.77 1.99 0.95 0.54 2.29 1.26 3.15 3.78 1.58 0.93 2.01 3/4 3/4 2.60 2.60 1.38 0.55 3.15 1.62 3.76 4.57 1.58 0.93 2.01 with standard cable plug 0-250 V AC/DC Port Orifice Cv Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [lb.] NPT 1/4 1/4 2.33 0-140 0-140 0.88 NPT 3/8 3/8 2.33 0-140 0-140 0.88 NPT 1/2 1/2 4.19 0-140 0-140 1.21 NPT 3/4 3/4 10.49 0-140 0-140 2.21 NPT 1 1 12.82 0-140 ----- 3.75 NPT 1 1/4 1 12.82 0-140 ----- 3.75 NPT 1 1/2 1 1/2 34.95 0-140 ----- 7.94 NPT 2 1 1/2 34.95 0-140 ----- 7.94 16 24 V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz 458 078 N 458 079 P 458 080 D 458 081 S 456 439 T 456 440 G 456 441 V 456 442 W 456 443 X 456 444 Y 456 300 L 456 445 Z 456 446 S 456 447 T 456 301 H 456 448 C --- --- 457 163 X 457 164 Y 457 165 Z --- --- 457 166 S 457 167 T 457 168 C --- --- 457 169 D 457 170 A 457 171 X --- --- 457 172 Y 457 173 Z 457 174 S 1) NPT 1/4 UL Recognized Only

Solenoid Valve for hotwater, low pressure steam up to 248 o F Normally closed 6213 2/2-Way, NPT 1 /4 - NPT2, 0-140 psig Zero differential pressure High reliability Waterhammer-free Compact design with high flow rates Zero-differential Pressure 6213 Servo-assisted solenoid valve system. All valves operate with zero pressure differential. Ideal for hot water, oil, washing and bleaching lyes and low pressure steam applications. Pressure range 0-140 psig, max. -22 o F... +248 o F +131 o F, max. Brass EPDM Coil material Epoxy Power consumption DC: 10 W (Orifice 1/4,3/8,1/2,3/4) AC: Orifice [inch] 3/8 1/2 3/4 1 11/2 Inrush [VA] 34 36 38 160 202 Hold [VA] 14 14 14 38 38 Hold [W] 8 8 8 18 18 NEMA 4 (standard delivery: cable plug cable plug DIN 43650A) Variable dimensions [inch] - AC-Version Port Conn. Orifice [Inch] [inch] C D E F L A/F A B H I K 1/4, 3/8 3/8 1.48 1.50 0.79 0.41 1.97 1.06 2.68 3.23 1.26 0.81 1.77 1/2 1/2 1.77 1.99 0.95 0.54 2.29 1.26 3.13 3.76 1.26 0.81 1.77 3/4 3/4 2.60 2.60 1.38 0.55 3.15 1.62 3.74 4.55 1.26 0.81 1.77 1 1 4.12 4.12 2.72 0.66 3.74 1.62 5.44 6.24 1.93 0.97 2.32 1 1/4 1 4.12 4.12 2.72 0.68 3.74 1.97 5.44 6.42 1.93 0.97 2.32 1 1/2 1 1/2 4.12 4.12 2.72 0.68 5.20 2.36 5.89 7.07 1.93 0.97 2.32 2 1 1/2 4.12 4.12 2.72 0.69 5.20 2.76 5.89 7.27 1.93 0.97 2.32 Variable dimensions [inch] - DC-Version Port Conn. Orifice [Inch] [inch] C D E F L A/F A B H I K 1/4, 3/8 3/8 1.48 1.50 0.79 0.41 1.97 1.06 2.70 3.25 1.58 0.93 2.01 1/2 1/2 1.77 1.99 0.95 0.54 2.29 1.26 3.15 3.78 1.58 0.93 2.01 3/4 3/4 2.60 2.60 1.38 0.55 3.15 1.62 3.76 4.57 1.58 0.93 2.01 with standard cable plug 0-250 V AC/DC Port Orifice Cv Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [lb.] NPT 1/4 3/8 2.33 0-140 0-140 0.88 NPT 3/8 3/8 2.33 0-140 0-140 0.88 NPT 1/2 1/2 4.19 0-140 0-140 1.21 NPT 3/4 3/4 10.49 0-140 0-140 2.21 NPT 1 1 12.82 0-140 ----- 3.75 NPT 1 1/4 1 12.82 0-140 ----- 3.75 NPT 1 1/2 1 1/2 34.95 0-140 ----- 7.94 NPT 2 1 1/2 34.95 0-140 ----- 7.94 24 V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz 458 086 X 458 087 Y 458 088 H 458 089 A 457 175 T 457 176 U 457 177 V 457 178 E 457 179 F 457 180 V 457 181 J 457 182 K 457 183 L 457 184 M 457 185 N 457 186 P --- --- 457 234 W 457 235 X 457 236 Y --- --- 457 237 Z 457 238 A 457 239 B --- --- 457 240 Q 457 241 D 457 242 E --- --- 457 243 F 457 244 G 457 245 H 17

Zero-differential Pressure 6213 Stainless Steel Solenoid Valve for more aggressive media up to 195 o F Normally closed 6213 2/2-Way, NPT 1 /4 - NPT1, 0-140 psig Zero differential pressure High reliability Waterhammer-free Compact design with high flow rates Servo-assisted solenoid valve system. All valves operate from zero pressure. For more difficult and slightly aggressive fluids. Pressure range 0-140 psig 14 o F... +195 o F +130 o F, max. Stainless steel 316L 1.4404 FKM Coil material Polyamide (DN 10-20) Power consumption DC: 10 W (DN 10/13/20) AC: DN [mm] 10 13 20 Inrush [VA] 34 36 38 Hold [VA] 14 14 14 Hold [W] 8 8 8 NEMA 4 (standard delivery: cable plug cable plug DIN 43650A) Variable dimensions [Inch] - AC-Version Port C. DN [Inch] [inch] C D E F L A/F A B H I K 1/4 3/8 1.48 1.50.79.471.97 1.1 2.68 3.23 1.3.81 1.77 3/8 3/8 1.48 1.50.79.471.97 1.1 2.68 3.23 1.3.81 1.77 1/2 1/2 1.77 1.99.95.552.29 1.3 3.13 3.76 1.3.81 1.77 3/4 3/4 2.69 2.60 1.4.633.15 1.6 3.74 4.55 1.3.81 1.77 1 3/4 2.60 2.60 1.4.633.15 1.6 3.74 4.55 1.3.81 1.77 Variable dimensions [Inch] - DC-Version Port C. DN [Inch] [inch] C D E F L A/F A B H I K 1/4 3/8 1.48 1.50.79.47 1.97 1.06 2.70 3.25 1.6.93 2 3/8 3/8 1.48 1.50.79.47 1.97 1.06 2.70 3.25 1.6.93 2 1/2 1/2 1.77 1.99.95.55 2.3 1.26 3.15 3.78 1.6.93 2 3/4 3/4 2.60 2.60 1.4.63 3.2 1.62 3.76 4.57 1.6.93 2 1 3/4 2.60 2.60 1.4.63 3.2 1.62 3.76 4.57 1.6.93 2 with standard cable plug 0-250 V AC/DC Port Orifice Cv Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [oz.] NPT 1/4 3/8 2.33 0-140 0-140 14.10 NPT 3/8 3/8 2.33 0-140 0-140 14.10 NPT 1/2 1/2 4.19 0-140 0-140 19.38 NPT 3/4 3/4 10.49 0-140 0-140 38.76 NPT 1 3/4 10.49 0-140 0-140 38.76 Voltage / Frequency [V/Hz] 24/DC 24/60 120/60 240/60 458 732 A 458 733 B 458 734 C 458 735 D 458 736 E 458 737 F 458 738 Q 458 739 R 458 740 W 458 741 K 458 742 L 458 743 M 458 744 N 458 745 P 458 746 Q 458 747 R 458 748 S 458 749 T 458 750 Y 458 751 M 18

Intelligent Sensor ALL IN ONE Intelligent Sensor/Switch with outstanding Human-Machine Interface sets new standards in Indication, Transmitting, Monitoring and ON/OFF Control. Indication Transmitting Monitoring ON/OFF Control These intelligent multifunctional sensor/switches are available for flow, analytical, temperature and pressure control. The user-friendly display indicates the process value both in large digits and as a scalable bargraph. The process value is measured and transmitted to a controller via Easy LINK connection. Freely programmable switching points can be defined both in hysteresis and window mode over the entire measuring range for monitoring. Easy LINK allows the direct control of a solenoid valve, a process valve or other devices. ON/OFF Control enables the entry of internal and external setpoint values and in addition permits communication with an analog output signal to an external PLC or industry PC. The control precision lies around 5%. The Easy LINK connection leads to unmatched economical solutions for any measuring parameter. Remote operation allows separating display and sensor. Easy NET integrates the intelligent sensor in fieldbus configurations (e.g. AS-Interface). Improve your Total Cost of Ownership with this attractive, innovative solution. 19

Zero-differential Pressure 407 Solenoid Valve for 150# steam and media at high temperatures up to 356 o F Normally closed 407 2/2-Way, NPT 1 /2 - NPT1, 0-140 psig Zero differential pressure Fluid temperature up to 356 o F High reliability Stainless steel seat eliminates danger of erosion and dezincification Extremely reliable servo-assisted (zero differential pressure) valve for steam and other hot neutral fluids. hot air etc., for use on the vacuum side of autoclaves, in the textile, plastic and woodworking industries. Pressure range 0-140 psig, max. +32 o F... +356 o F +131 o F, max. Brass (valve seat 305 S.St.) PTFE Coil material Epoxy Power consumption AC: 24-240 VA (inrush), 35 VA (hold) NEMA 4 (standard delivery: cable plug cable plug DIN 43650A) H1 J1 A1 B1.15 Variable dimensions [inch] Port Conn. Orifice A1 B1 F1 E1 L1 J1 H1 A/F [inch] NPT 1/2 1/2 4.45 5.00 0.54 1.58 2.56 3.06 1.26 1.06 NPT 3/4 3/4 5.16 5.79 0.55 2.36 3.94 3.35 1.26 1.26 NPT 1 1 5.38 6.19 0.66 2.76 4.53 3.35 1.26 1.62 L1 F1 C A/F E1 with standard cable plug 0-250 V AC/DC Port Orifice Cv Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [lb.] NPT 1/2 1/2 4.31 0-140 --- --- 2.21 NPT 3/4 3/4 5.83 0-140 --- --- 3.09 NPT 1 1 11.65 0-140 --- --- 4.19 24 V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz on request 456 140 B 453 770 P on request on request 454 437 P 453 771 C 454 436 N on request 453 874 U 453 772 D on request 20

Solenoid Valve, Waterhammer-free for neutral fluids Normally closed 5281 2/2-Way, NPT 1 /2 - NPT2, 2.8-230 psig High reliability Modular solenoid coil-system Waterhammer-free, low noise Compact design with high flow rates 2/2-Way, Servo-Assisted 5281 Modular, servo-assisted solenoid valve system, for city water, neutral gases and clean liquids. Require 2.8 psig acoss the valve open. Applications: process systems, chemical processing. water/sewage treatment and sterilizers. Pressure range 2.8-230 psig, max. +14 o F... +194 o F +131 o F, max. Brass NBR Coil material Polyamide Power consumption DC: 8 W AC: 21 VA(inrush),12 VA(hold) NEMA 4 (standard delivery: cable plug cable plug DIN 43650A) Options - Manual override - 5 W power consumption - 2 W power consumption - LED cable plug - Valve mounted timer systems.21 A B 1.14 1.77 A/F 0.55 G1/8.15 1.61 Variable dimensions [inch] DN XX Port Conn. Orifice A B F E L A/F [inch] [inch] NPT 1/2 1/2 3.39 3.94 0.54 1.58 2.56 1.06 NPT 3/4 3/4 3.61 4.24 0.55 2.36 3.94 1.26 NPT 1 1 3.76 4.57 0.66 2.76 4.53 1.62 NPT 1 1/4 1 1/4 4.00 4.98 0.68 3.35 4.96 1.97 NPT 1 1/2 1 1/2 4.16 5.34 0.68 3.35 4.96 2.36 NPT 2 2 4.81 6.19 0.69 4.53 6.46 2.76 F L D A/F E with standard cable plug 0-250 V AC/DC Port Orifice Cv Pressure Range Weight connection [Inch] [inch] [PSI] [lb.] NPT 1/2 1/2 4.66 2.8-230 1.32 NPT 3/4 3/4 5.83 2.8-230 2.43 NPT 1 1 11.65 2.8-230 3.31 NPT 1 1/4 1 1/4 23.30 2.8-230 4.96 NPT 1 1/2 1 1/2 23.30 2.8-230 5.84 NPT 2 2 46.60 2.8-230 10.91 24 V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz 456 864 V 456 865 W 456 866 X 456 867 Y 456 868 H 456 869 A 456 870 F 456 871 U 456 872 V 456 873 W 456 874 X 456 875 Y 456 876 Z 456 877 S 456 878 B 456 879 C 456 880 S 456 881 P 456 882 Q 456 883 R 456 884 J 456 885 K 456 886 L 456 888 W 21

2/2-Way, Servo-Assisted Solenoid Valve, Waterhammer-free for neutral fluids, normally open Normally open 0281 2/2-Way, NPT 1 /2 - NPT2, 2.8-230 psig High reliability Waterhammer-free Compact design with high flow rates 0281 Shown UR-version Modular, normally open, servo-assisted solenoid valve system, for city water, neutral gases and clean liquids. Requires 2.8 psig across the valve to open. Applications: process systems, chemical processing, water/sewage treatment. Pressure range 2.8-230 psig 14 o F... +195 o F +130 o F, max. Brass NBR Coil material Epoxy, coil cover brass Power consumption DC: 8 W AC: 21 VA(inrush),12 VA(hold) IP 65 (standard delivery: cable plug cable plug DIN 43 650 A) 1.26 1.14 1.42 Options - LED cable plug - Valve mounted timer systems Shown UR-version B1 A1 Variable dimensions [inch] Port Connection Orifice [inch] A1 B1 F E1 L1 A/F NPT 1/2 1/2 3.78 4.33.55 1.58 2.56 1.06 NPT 3/4 3/4 4.00 4.63.63 2.36 3.94 1.26 NPT 1 1 4.16 4.96.71 2.76 4.53 1.62 NPT 1 1/4 1 1/4 4.39 5.38.79 3.35 4.96 1.97 NPT 1 1/2 1 1/2 4.55 5.73.87 3.35 4.96 2.36 NPT 2 2 5.21 6.59.95 4.53 6.46 2.76 L1 F D E1 with H conduit plug 0-250 V AC/DC Port Orifice Cv Pressure Range Weight connection [Inch] [inch] [PSI] [lb] NPT 1/2 1/2 4.0 2.8-230 1.32 NPT 3/4 3/4 5.0 2.8-230 2.43 NPT 1 1 10.0 2.8-230 3.31 NPT 1 1/4 1 1/4 20.0 2.8-230 4.96 NPT 1 1/2 1 1/2 20.0 2.8-230 5.84 NPT 2 2 40.0 2.8-230 10.9 24/DC 24/50-60 120/50-60 240/50-60 458 891 T 458 892 U 458 893 V 458 894 W 458 895 X 458 896 Y 458 897 Z 458 898 A 458 899 B 458 900 Q 458 901 D 458 902 E 458 903 F 458 904 G 458 905 H 458 906 A 458 907 B 458 908 L 458 909 M 458 910 H 458 911 W 458 912 X 458 913 Y 458 914 Z 22

Time for a New Technology in Flow Indication Piping upon customer needs - position independent flow indication Less piping, maintenance-free technology considerably reduces Total Cost of Ownership ALL IN ONE : Indication, Monitoring, Transmitting and ON/OFF Control in one device Remote operation allows separating display and sensor Complete communication due to external setpoint, Easy LINK or AS-Interface

AS-Interface Overview 2510/11 ASi Cable plug according to DIN 43650, Form C and A 2510/11 2510/11 Compatible valves: - With separating diaphragm - Rocker solenoid valves for analytical applications - Banjo and NAMUR valves 330 6605 5281 6012 6519 1066 / 8631 / 8633 ASi Control HEADS for various process valves 1066 8631 8633 Compatible valves: - Angle seat - Globe - Diaphragm - Quarter-Turn 2000 2012 2030 2031 2655 5470 / 8640 ASi Centralized process actuation solution for the processing industries 5470 8640 Sensors ASi Sensors for flow, temperature, level and pressure control 8032 8400 8181 8311

2/2-Way, Servo-Assisted 6212 Brass Solenoid Valve for slightly contaminated fluids Normally closed 6212 2/2-Way, NPT 3 /8 - NPT1, 2.8-140 psig Separating diaphragm isolates solenoid from operating fluid Low power consumption (no relay necessary when used with a PLC) Easy Diagnostics Modular, low-power, servo-assisted valve system with Burkert s revolutionary Rocker system completely isolating the pilot from the fluid. The valve is therefore less sensitive to slightly contaminated. Pressure range 1) 2.8-140 psig 32 o F... +160 o F +130 o F, max. Brass NBR Coil material Polyamide Power consumption DC: 3.4 W UC (universal voltage): 4 W IP 65 (standard delivery: cable plug cable plug DIN 43 650 A) Spade location sidewards B1 1.06 1.17 1.95 B2 1.17 Spade location on top 1.95.63 Options - Diagnostics: - Flow or no flow switch - Normally open (N.O.) - FPM or EPDM seal L F L F G C Variable dimensions [inch] Port Connection Orifice [inch] B1 B2 C F L NPT 3/8 3/8 3.72 3.98 1.26.47 2.17 NPT 1/2 3/8 3.72 3.98 1.26.55 2.17 NPT 1/2 1/2 3.98 4.20 1.58.55 2.56 NPT 3/4 1/2 3.98 4.20 1.58.63 2.56 NPT 3/4 3/4 4.51 4.77 2.36.63 3.94 NPT 1 3/4 4.51 4.77 2.36.71 3.94 with standard-cable plug 0-250 V AC/DC Port Orifice Cv Pressure Range Weight connection [Inch] [inch] [PSI] [oz.] NPT 3/8 3/8 2.2 2.8-140 7.05 NPT 1/2 3/8 2.2 2.8-140 7.05 NPT 1/2 1/2 4.2 2.8-140 12.33 NPT 3/4 1/2 4.2 2.8-140 12.33 NPT 3/4 3/4 9.7 2.8-140 28.19 NPT 1 3/4 9.7 2.8-140 28.19 1) Requires 2.8 psi minimum differential pressure A B C 24/DC 1) 120/ UC 2) 240/ UC 2) 458 003 C 458 004 D 458 005 E 458 015 X 458 016 Y 458 017 Z 458 027 T 458 028 C 458 029 D 458 039 F 458 040 L 458 041 H 458 051 B 458 052 C 458 053 D 458 063 F 458 064 G 458 065 H 1) coil with spade location sidewards 2) coil with rectifier, varistor and spade location on top 26

Stainless Steel Solenoid Valve for slightly contaminated and aggressive fluids Normally closed 6212 2/2-Way, NPT 3 /8 - NPT1, 2.8-140 psig Separating diaphragm isolates solenoid from operating fluid Low power consumption (no relay necessary when used with a PLC) Easy Diagnostics 2/2-Way, Servo-Assisted 6212 Modular, low-power, servo-assisted valve system with Burkert s revolutionary Rocker system completely isolating the pilot from the fluid. The valve is therefore less sensitive to slightly contaminated. Pressure range 1) 2.8-140 psig 32 o F... +160 o F +2660 o F, max. Stainless steel 316L FPM Coil material Polyamide Power consumption DC: 3.4 W UC: 4 W NEMA4 (standard delivery: cable plug cable plug DIN 43 650 A) B1 Spade location sidewards 1.06 1.17 1.95 B2 1.17 Spade location on top 1.95.63 Options - Normally open (N.O.) - EPDM seal F F G L L C Variable dimensions [inch] Port Connection Orifice [inch] B1 B2 C F L NPT 3/8 3/8 3.72 3.98 1.26.47 2.17 NPT 1/2 3/8 3.72 3.98 1.26.55 2.17 NPT 1/2 1/2 3.98 4.20 1.58.55 2.56 NPT 3/4 1/2 3.98 4.20 1.58.63 2.56 NPT 3/4 3/4 4.51 4.77 2.36.63 3.94 NPT 1 3/4 4.51 4.77 2.36.71 3.94 with standard-cable plug 0-250 V AC/DC Port Orifice Cv Pressure Range Weight connection [Inch] [inch] [PSI] [oz.] NPT 3/8 3/8 2.2 2.8-140 7.05 NPT 1/2 3/8 2.2 2.8-140 7.05 NPT 1/2 1/2 4.2 2.8-140 12.33 NPT 3/4 1/2 4.2 2.8-140 12.33 NPT 3/4 3/4 9.7 2.8-140 28.19 NPT 1 3/4 9.7 2.8-140 28.19 1) Requires 2.8 psi minimum differential pressure A B C 24/DC 1) 120/ UC 2) 240/ UC 2) 458 133 S 458 134 T 458 135 U 458 137 W 458 138 F 458 139 G 458 141 A 458 142 B 458 143 C 458 145 E 458 146 F 458 147 G 458 149 J 458 150 P 458 151 C 458 153 E 458 154 F 458 155 G 1) coil with spade location sidewards 2) coil with rectifier, varistor and spade location on top 27

2/2-Way, Servo-Assisted 5282 Brass Solenoid Valve with Rocker System for slightly contaminated fluids Normally closed 5282 2/2-Way, NPT 1 /2 - NPT2, 2.8-140 psig Extremely long service life Separating diaphragm isolates solenoid from operating fluid Lockable manual override as standard Adjustable open-close rate Modular, servo-assisted valve system with Burkert s revolutionary rocker system completely isolating the pilot from the fluid. The valve is therefore less sensitive to contaminated fluids. Pressure range 1) Coil material Power consumption cable plug 2.8-140 psig, max. +32 o F... +194 o F +131 o F, max. Brass NBR Epoxy DC: 8 W AC: 21 VA(inrush),12 VA(hold) IP 65 (standard delivery: cable plug DIN 43 650 A)) Options - Normally open (N.O.) - Electrical feedback - Impulse coil (zero watt) B A 1.14 Variable dimensions [inch] Port Conn. Orifice A B F E L1 A/F [inch] [inch] NPT 1/2 1/2 4.29 4.85 0.54 1.58 2.56 1.06 NPT 3/4 3/4 4.53 5.16 0.55 2.36 3.94 1.26 NPT 1 1 4.75 5.56 0.66 2.76 4.53 1.62 NPT 1 1/4 1 1/4 4.81 5.79 0.68 3.35 4.96 1.97 NPT 1 1/2 1 1/2 4.96 6.15 0.68 3.35 4.96 2.36 NPT 2 2 5.61 6.99 0.69 4.53 6.46 2.76 F L1 D SW (A/F) E with standard cable plug 0-250 V AC/DC Port Orifice Cv Pressure Range Weight connection [Inch] [inch] [PSI] [lb.] NPT 1/2 1/2 4.66 2.8-140 2.09 NPT 3/4 3/4 5.83 2.8-140 3.09 NPT 1 1 11.65 2.8-140 4.08 NPT 1 1/4 1 1/4 23.30 2.8-140 5.73 NPT 1 1/2 1 1/2 23.30 2.8-140 6.73 NPT 2 2 46.60 2.8-140 11.36 1) Requires 2.8 psi minimum differential pressure 28 24 V DC 24 V/50-60 Hz 120 V/60 Hz 240 V/60 Hz 456 890 U 456 891 R 456 892 J 456 893 K 456 894 L 456 895 M 456 896 N 456 897 P 456 898 Y 456 899 Z 456 900 E 456 901 T 456 902 U 456 903 V 456 904 W 456 905 X 456 906 Y 456 907 Z 456 908 A 456 909 B 456 910 X 456 911 L 456 912 M 456 913 N

Stainless Steel Solenoid Valve with Rocker System for slightly contaminated fluids Normally closed 5282 2/2-Way, NPT 1 /2 - NPT2, 2.8-140 psig High reliability Separating diaphragm isolates solenoid from operating fluid Lockable manual override as standard Adjustable open-close rate 2/2-Way, Servo-Assisted 5282 Modular, servo-assisted valve system with Burkert s revolutionary rocker system completely isolating the pilot from the fluid. The valve is therefore less sensitive to contaminated fluids. Pressure range 1) 2.8-140 psig, max. +32 o F... +194 o F +131 o F, max. 316 SST, 1.4581 SST FPM Coil material Epoxy Power consumption DC: 8 W AC: 21 VA(inrush),12 VA(hold) IP 65 (standard delivery: cable plug cable plug DIN 43 650 A) Options - Normally open (N.O.) - CSA electrical feedback - LED Cable plug - Impulse coil (zero watt) A 1.14 Variable dimensions [inch] Port Conn. Orifice A B F E L1 A/F [inch] [inch] NPT 1/2 1/2 4.53 5.16 0.54 2.36 3.94 1.26 NPT 3/4 3/4 3.61 4.24 0.55 2.36 3.94 1.26 NPT 1 1 3.76 4.57 0.66 2.76 4.53 1.62 NPT 1 1/4 1 1/4 4.00 4.98 0.68 3.35 4.96 1.97 NPT 1 1/2 1 1/2 4.16 5.34 0.68 3.35 4.96 2.36 NPT 2 2 4.81 6.19 0.69 4.53 6.46 2.76 B F L1 D SW (A/F) E with standard-cable plug 0-250 V AC/DC Port Orifice Cv Pressure Range Weight connection [Inch] [inch] [PSI] [lb.] NPT 1/2 3/4 5.83 2.8-140 2.09 NPT 3/4 3/4 5.83 2.8-140 3.09 NPT 1 1 11.65 2.8-140 3.97 NPT 1 1/4 1 1/4 23.30 2.8-140 4.96 NPT 1 1/2 1 1/2 23.30 2.8-140 5.95 NPT 2 2 46.60 2.8-140 10.58 1) Requires 2.8 psi minimum differential pressure 29 24 V DC 24 V/50-60 Hz 120 V/60 Hz 240 V/60 Hz 456 914 P 456 915 Q 456 916 R 456 917 J 456 918 T 456 919 U 456 920 Z 456 921 N 456 922 P 456 923 Q 456 924 R 456 925 J 456 926 K 456 927 L 456 928 V 456 929 W 456 930 T 456 931 Q 456 932 R 456 933 J 456 934 K 456 935 L 456 936 M 456 937 N

2/2-Way, Servo-Assisted 5404 Solenoid Valve for High Pressure to 355 psig Normally closed 5404 2/2-Way, NPT 1 /2 - NPT1, 14-355 psig High reliability Uneffected by pressure surges Easy coil change Coil can be locked in 4x90 o positions, or move freely between positions as required Modular, servo-assisted solenoid valve system. Designed specially for high pressure neutral gases and liquis such as compressed air, natural gas, water. Applications: Compressed air pressure systems and gas turbines. Pressure range 1) 14-355 psig, max. +14 o F... +194 o F +131 o F, max. Brass PTFE (O-rings NBR) Coil material Polyamide Power consumption DC: 8 W AC: 21 VA(inrush),12 VA(hold) IP 65 (standard delivery: cable plug cable plug DIN 43 650 A) D.23 1.81 F L.59 A B A/F E B A Variable dimensions [inch] Port Conn. Orifice A B F E L A/F [inch] [inch] NPT 1/2 1/2 3.27 3.76 0.54 1.26 2.56 1.06 NPT 3/4 3/4 3.66 4.29 0.55 2.36 3.94 1.26 NPT 1 1 3.92 4.69 0.66 2.76 4.53 1.62 D F L A/F E with standard-cable plug 0-250 V AC/DC Port Orifice Cv Pressure Range Weight connection (air) (liquids) [Inch] [inch] [PSI] [PSI] [lb.] NPT 1/2 7/16 2.33 14-355 14-355 1.32 NPT 3/4 3/4 5.83 14-355 14-355 2.58 NPT 1 1 11.65 14-355 14-355 3.70 1) Requires 2.8 psi minimum differential pressure 30 24 V DC 24 V/50-60 Hz 120 V/60 Hz 240 V/60 Hz 456 938 X 456 939 Y 456 940 D 456 941 S 456 942 T 456 943 U 456 944 V 456 945 W 456 946 X 456 947 Y 456 948 H 456 949 A

I 150# Angle-Seat Steam Valve Normally closed 6038 2-way angle seat solenoid valve for critical steam applications. The powerful coil attracts the plunger opening a bore in the pre-stroke relieving pressure allowing the valve to be opened fully by the magnetic power. When de-energized, the valve is pushed closed by a spring force aided by the upstream pressure. The coil is situated away from the fluid stream for longer life. 2/2-Way, NPT 3 /8 - NPT1, 0-150 psig Zero differential pressure Long service life Compact design Excellent temperature control system module 2/2-Way, Angle-Seat 6038 Pressure range 0-150 psig Port connection NPT 3/8 - NPT 1 +32 o F... +356 o F +131 o F, max. Gunmetal Seat material Stainless steel 316 PTFE Plunger seal FPM O-rings FPM Coil material Epoxy Fluids Steam Power consumption AC: 106 VA (inrush) AC: 38 VA / 18 W (hold) IP 65 (standard delivery: cable plug cable plug 2508, DIN 43 650 A, 0-250 V) B SW 45 ød A C E H G F Cable plug type 2508 DIN 43 650, form A, (0-250 V AC/DC), standard delivery Options - Wide range of cable plugs (see page 81) Variable dimensions [inch] Port C. DN Thread Depth A B E F G H I ø D [inch] C [inch] [inch] [inch] [inch] [inch] [inch] [inch] [inch] NPT 3/8 7/16 0.40 2.55 4.90 0.94 4.01 4.56 0.53 5.98 NPT 1/2 7/16 0.53 2.55 4.90 0.94 4.01 4.56 0.53 5.98 NPT 1/2 9/16 0.53 2.95 5.21 1.06 4.21 4.78 0.63 6.41 NPT 3/4 9/16 0.55 2.95 5.21 1.06 4.21 4.78 0.63 6.41 NPT 1 9/16 0.86 3.74 5.76 1.22 4.80 5.15 0.80 7.20 with standard-cable plug 0-250 V AC Port connection [inch] Orifice DN [inch] Cv Response times (opening) (closing) [ms] [ms] Weight [Ib.] 24/DC Voltage / Frequency [V/Hz] 24/50-60 110/50-60 230/50-60 NPT 3/8 NPT 1/2 NPT 1/2 NPT 3/4 NPT 1 7/16 7/16 9/16 9/16 9/16 2.6 2.6 3.3 3.3 3.3 20.0 20.0 30.0 30.0 30.0 60.0 60.0 50.0 50.0 50.0 1.98 1.98 2.42 2.42 2.06 --- --- --- --- --- --- --- --- --- --- 459 059 L 459 062 F 459 071 G 459 077 E 459 083 V 459 060 R 458 083 G 459 072 H 459 078 P 459 084 W 459 061 E 459 064 M 459 073 A 459 079 Q 459 085 X 31

Miniature Brass Solenoid Valve with threaded port connection 3/2-Way, Miniature 6012 When de-energized, outlet port A exhausted 6012 3/2-Way, NPT 1 /8, 0-140 psig Coil can be changed easily with valve in place Coil can be locked in 4x90 o positions or move freely between positions as required High-quality FPM seal material standard Modular, direct acting, brass body valve for neutral gases and liquids such as compressed air, water, hydraulic oil. Stainless steel valve version is available for more aggressive media. Suitable for technical vacuum. Pressure range 0-140 psig, max. +14 o F... +212 o F +131 o F, max. Brass FPM Coil material Polyamide Power consumption DC: 4 W AC: 9 VA (inrush), 6 VA (hold) IP 65 (standard delivery: cable plug cable plug DIN 43 650 C, 0-250 V) 1.95 1.14.19 1.27.79.32.16.58 Options - Normally open version - Wide range of cable plug options Type 2506 with LED and varistor (see page 81) - Stainless steel body 1.17.79.77.99.28.62 A.55.34.41 A/F.43 1.19.55 with standard-cable plug 0-250 V AC/DC Port Orifice Cv Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [oz.] Brass version (without manual override) NPT 1/8 3/64 0.052 0-140 0-140 4.62 NPT 1/8 1/16 0.07 0-85 0-85 4.62 24 V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz Brass version (without manual override) 456 808 E 456 809 F 456 810 T 456 811 Q 456 812 R 456 813 J 456 814 K 456 815 L 32

Compact Solenoid Valve with threaded port connection When de-energized, outlet port A exhausted 6014 3/2-Way; NPT 1 /8 - NPT 1 /4; 0-140 psig Coil can be changed easily with valve in place Coil can be locked in 4x90 o positions or move freely between positions as required 3/2-Way, Compact Modular, direct acting solenoid valve system with brass body. Suitable for neutral gases and liquids such as compressed air, natural gas, water, hydraulic oil. Also for technical vacuum. Ideal for reliable actuation of spring return process valves. Pressure range 0-140 psig, max. +14 o F... +212 o F +131 o F, max. Brass FKM Coil material Polyamide Power consumption DC: 8 W AC: 24 VA(inrush),17 VA(hold) NEMA 4 (standard delivery: cable plug cable plug DIN 43650A) High-quality FKM seal material standard 6014 Variable dimensions [inch] Without manual override A B C D E F Threaded port NPT-inch 1/8 1.26 0.82 1.28 1.26 1.77 Threaded port NPT-inch 1/4 1.81 1.06 1.93 1.26 1.77 With manual override A B C D E F Threaded port NPT-inch 1/8 1.26 0.82 1.28 1.26 1.77 Threaded port NPT-inch 1/4 1.81 1.06 1.93 1.26 1.77 Port Orifice Cv Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [oz.] without manual override NPT 1/8 5/64 0.13 0-140 0-140 12.86 NPT 1/8 7/64 0.19 0-85 0-85 12.86 with manual override NPT 1/4 5/64 0.13 0-140 0-140 16.39 with standard cable plug 0-250 V AC/DC 24 V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz without manual override 456 343 A 456 344 B 456 345 C 456 346 D 456 351 A 456 352 B 456 353 C 456 354 D with manual override CD 00587 CD 00588 CD 00589 CD 00590 33

3/2-Way, Isolating diaphragm 330 Rocker Solenoid Valve with Isolating Diaphragm for neutral fluids When de-energized, outlet port A exhausted When de-energized, outlet port B pressurized 330 3/2-Way, NPT 1 /4, 0-170 psig Separating diaphragm isolates solenoid system from the operating fluid Extremely long service life, even in non-lubricated fluids Insensitive to slightly contaminated fluids Direct acting valve featuring Burkert s unique pivoted armature. The unique valve design hermetically isolates the actuator from the fluid. This makes it less sensitive to slightly contaminated fluids than a plunger-type system and provides a long service life, even in non-lubricated applications. Pressure range 0-170 psig, max. +32 o F... +194 o F +131 o F, max. Brass FKM Coil material Epoxy Power consumption DC: 8 W AC: 30 VA(inrush), 15 VA(hold) NEMA 4 (standard delivery: cable plug cable plug DIN 43650A) Options - Vacuum service - EPDM seal - Diagnosis: Electrical feedback signaller 1060 - Impulse coil - Universal function see page 35 with standard cable plug 0-250 V AC/DC Port Orifice Cv Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [oz.] Normally closed configuration NPT 1/4 5/64 0.13 0-170 0-170 14.10 NPT 1/4 1/8 0.27 0-140 0-140 14.10 Normally open configuration NPT 1/4 5/64 0.13 0-170 0-170 14.10 NPT 1/4 1/8 0.27 0-140 0-140 14.10 24 V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz Normally closed configuration 451 704 G 451 706 A 450 294 G 451 708 L 451 710 H 451 712 X 450 297 B 451 714 Z Normally open configuration US 00154 CD 0473 U 451 848 G CD 00591 450 557 F 451 731 S 450 299 M CD 00593 34

Solenoid Valve with Isolating Diaphragm; Universal 2 1 3 Universal function, any flow direction CSA-Version 330 3/2-Way, NPT 1 /4, 0-170 psig Universal function Separating diaphragm isolates solenoid system from the operating fluid Insensitive to aggressive, slightly contaminated fluids, de-ionized water 3/2-Way, Isolating diaphragm 330 Direct acting valve featuring Burkert s unique pivoted armature. The unique valve design hermetically isolates the actuator from the fluid. This makes it less sensitive to slightly contaminated fluids than a plunger-type system and provides a long service life, even in non-lubricated applications. Pressure range 0-170 psig, max. +32 o F... +194 o F +131 o F, max. Brass, stainless steel FKM Coil material Epoxy Power consumption DC: 8 W AC: 30 VA(inrush), 15 VA(hold) NEMA 4 (standard delivery: cable plug cable plug DIN 43650A) Options - Vacuum - Impulse coil - Electrical feedback - EPDM seal - Kalrez seal - Buna seal with standard cable plug 0-250 V AC/DC Port Orifice Cv 1) Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [oz.] NPT 1/4 5/64 0.13 0-170 0-170 14.10 NPT 1/4 1/8 0.27 0-85 0-85 14.10 NPT 1/4 5/32 0.33 0-42 0-42 14.10 Port Orifice Cv 1) Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [oz.] NPT 1/4 5/64 0.13 0-170 0-170 14.10 NPT 1/4 1/8 0.27 0-85 0-85 14.10 NPT 1/4 5/32 0.33 0-42 0-42 14.10 1) Flow rate reduced 20% with DC-current operation Brass Body 24 V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz 457 218 E CD 00651 450 301 P CD 00652 US 00151 455 435 N 450 303 R CD 00595 454 413 P 454 457 T 450 795 E 454 151 Y Stainless Steel Body 24 V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz 455 574 Z CD 00653 453 776 H CD 00654 453 831 R 455 533 Q 453 777A CD 00655 452 808 A US 02322 CD 00656 CD 00657 35

Solenoid Valve for neutral media and steam up to 356 o F 3/2-Way, Compact Normally closed 355 3/2-Way, NPT 1 /4, 0-140 psig Fluid temperature up to 356 o F High reliability No danger of erosion or de-zincification, due to stainless steel seat 355 Direct acting solenoid valve for neutral gases and liquids at high temperatures.the brass body with stainless seat allows reliable control of 150# steam, hot water, hot air and thermal oils. Exhaust is though top port. Pressure range Coil material Power consumption 0-140 psig, max. +14 o F... +194 o F (seal NBR) -40 o F... +356 o F (seal PTFE) +131 o F, max. Brass, stainless steel NBR, PTFE Epoxy DC: 12 W AC: 40 VA 4.55 4.07 M14x1.5 0.71 A/F 22 0.35 1.06 NEMA 4 (standard delivery: cable plug cable plug DIN 43 650 A) 0.26 A/F 32 Options - DN 5/64 inch (224 psig) - High temperature up to +482 o F 1.46 2.20 0.47 0.55 NPT 1/4 0.16 0.39 0.47 2.87 1.57 with standard-cable plug 0-250 V AC/DC Port Orifice Cv Pressure Range Weight connection (AC) (DC) [inch] [inch] [PSI] [PSI] [oz.] NBR-seal NPT 1/4 1/8 0.2 0-140 0-140 21.2 NPT 1/4 5/32 0.5 0-84 0-84 21.2 PTFE-seal NPT 1/4 1/8 0.2 0-112 0-112 21.2 NPT 1/4 5/32 0.5 0-70 0-70 21.2 Voltage / Frequency [V/Hz] 24/DC 24/60 120/60 240/60 Brass valve body US 08 935 US 08 934 US 08 933 US 08 932 US 08 931 US 08 930 US 08 929 US 08 928 Stainless steel valve body US 08 927 US 08 926 US 08 925 US 08 924 US 08 923 US 08 922 US 08 921 US 08 920 36

Mini TOP Control HEAD ON/OFF Control for Pneumatically Actuated Process Valves Customized System Solutions with different process valve types, materials and process connections Easy to install with integrated pilot valves and self-adjusting limit switches Easy LINK with intelligent sensor systems Compact design Easy to commission Easy NET AS-Interface connection According to Burkert s strategy to offer Customized System Solutions at any level of process automation, we have introduced the Mini TOP, a new compact generation of ON/OFF control heads for our process valve systems family bringing all the features of Burkert s Easy concept to smaller sized pneumatic valves. The Mini TOP integrates pilot valves and position feedback in a unique compact design. Thanks to the modularity of Burkert s process valve range, the Mini TOP can be easily plugged onto a wide variety of valves. Both single or double acting actuators are possible. Position feedback can be either achieved by using mechanical or inductive limit switches. Its unique design makes installation and commissioning very simple and results in a lower Total Cost of Ownership. www.buerkert-contromatic.com 37

Electrically Actuated Ball Valve 2656 NPT 1 /4 - NPT 1 1 /2, Stainless Steel High reliability Insensitive to slightly aggressive and slightly contaminated liquids Compact design Full port, three piece body Modular, three piece, full port stainless steel ball valve with compact, powerful electric rotary actuator for on-off control of slightly aggressive fluids. Ball Valve 2656 Internally the floating ball design reduces torque requirements while stem has been designed to be blow-out proof Technical data (valve body) Stainless Steel Pressure range 0 up to 565 psig Port connections NPT 1/4 - NPT 2 Seats PTFE Fluids Neutral gases and fluids, Ultrapure water, Slightly aggressive fluids, Contaminated liquids Medium temperature +14 F up to +248 F (> +248 F on request) Max. ambient temperature +14 F up to +140 F Options 4...20 ma position control Technical data (actuator - electric operation) Polycarbonate Rotation 90 ± 3 +14 F up to +122 F Limit switch Changeover switch, single-pole Electrical connection Cable plug for cable ø 6-7 mm acc. to DIN 43650 A Rating IP65 Signals Impedance signal input R input: < 50 Ω Accuracy Linearity: < ±1,5 % Hysteresis: < ±1,5 % Flange interface F05 acc. to ISO 5211 Installation as required, preferably with solenoid system upright Actuator Operating voltage Power Torque Duty Full with tolerance ± 10% required cycles rotation time [V] [W] [Nm] [%] [s/90 ] 3011 24 DC 7 12 100 10 3001 24 DC 20 25 100 7 3002 24 DC 20 100 100 14 Options (actuator - electric operation) Control signal 4...20 ma Electronic control signal of drive torque Orifice DN Port conn. Voltage Actuator type Cv Weight [inch] [inch] [oz.] 3/8 NPT 1/4 24 V DC 3011 8.2 95.24 7/16 NPT 3/8 24 V DC 3011 8.2 95.24 9/16 NPT 1/2 24 V DC 3011 11.8 102.29 3/4 NPT 3/4 24 V DC 3011 32.9 123.46 1 NPT 1 24 V DC 3001 47.0 211.64 1 1/4 NPT 1 1/4 24 V DC 3001 83.5 236.33 1 1/2 NPT 1 1/2 24 V DC 3002 121.1 299.83 431 297 L 431 301 Y 431 305 U 431 309 G 431 313 K 431 318 Y 431 323 M 38

Electrically Actuated Ball Valve (valve body) (actuator - electric operation) 1.52 G F øc B E Type 1050 DIN 43650 A Port connection Flange full reduced ISO 5211 bore bore [inch] [inch] A B ø C NPT 1/4 F03 2.62 1.09 0.39 NPT 3/8 NPT 1/2 F03 2.62 1.09 0.50 NPT 1/2 NPT 3/4 F04 2.82 1.50 0.59 NPT 3/4 NPT 1 F04 3.80 1.64 0.79 NPT 1 NPT 1 1/4 F05 4.29 2.03 0.98 NPT 1 1/4 NPT 1 1/2 F05 4.61 2.17 1.25 NPT 1 1/2 NPT 2 F07 5.08 2.60 1.50 Materials (valve body) Orifice Port connection Actuator DN Full Reduced bore bore [inch] [inch] [inch] E E* F F* G 3/8 NPT 1/4 3011 4.92 4.92 6.57 6.57 4.80 7/16 NPT 3/8 NPT 1/2 3011 4.92 4.92 6.57 6.57 4.80 9/16 NPT 1/2 NPT 3/4 3011 4.92 4.92 7.01 7.01 4.80 3/4 NPT 3/4 NPT 1 3011 4.92 4.92 7.13 7.13 4.80 1 NPT 1 NPT 1 1/4 3001 5.31 7.28 7.91 9.88 4.80 1 1/4 NPT 1 1/4 NPT 1 1/2 3001 5.31 7.28 8.03 10.00 4.80 1 1/2 NPT 1 1/2 NPT 2 3002 6.69 8.66 8.46 10.43 4.80 E* and F* 4-20mA version Ball Valve 2656 12 11 10 9 6 5 4 3 2 14 13 8 7 15 DIN specification 1. Body SS 1.4401 2. End cap SS 1.4401 3. Seat RPTFE 4. Body gasket PTFE / RPTFE 5. Nut SS 1.4301 6. Washer SS 1.4301 7. Bolt SS 1.4301 8. Packing Set PTFE 9. Bushing PTFE + graphite 10. Gland SS 1.4301 11. Belleville washer SS 1.4310 12. Lock saddle SS 1.4301 13. Stem nut SS 1.4301 14. Stem SS 1.4401 15. Ball SS 1.4401 1 39

Three Piece Full Port Stainless Actuated Ball Valve 2655 NPT 1 /4 - NPT 1 1 /2, Stainless Steel High reliability Insensitive to slightly aggressive and slightly contaminated liquids Self-adjusting floating ball Direct ISO mount Modular. three piece, full port stainless steel ball valve with compact, powerful pneumatic helical actuator for on-off control of slightly aggressive fluids. Internally the floating ball design reduces torque requirements while the stem has been designed to be blow-out proof Ball Valve 2655 Technical data (valve body) 316 Stainless Steel 1.4401 Pressure range 0 up to 565 psig Port connections NPT 1/4 - NPT 1 1/2 Orifice DN 3/8 - DN 1 1/2 Sealing PTFE Fluids Neutral gases and fluids, Ultrapure water, Slightly aggressive fluids, Contaminated liquids Medium temperature +14 F up to +248 F (> +248 F on request) Max. ambient temperature +14 F up to +140 F Options On-Off Top Control head with integral pilot valve and limit switches Continuous Top Control for position control Technical data (actuator) Polyamide Control function of actuator A: single acting with spring force closed I: double acting no spring Size ø 63 mm - control function I ø 100 mm (G) - control function A and I Control medium Neutral gases and air Control pressure (actuator alone) size ø 63 mm 28 up to 140 psig size ø 100 mm 28 up to 85 psig Rotation 90 ± 3 +14 F up to +140 F Response time 1 up to 3.5 s Control funct. Orifice DN Size. Actuator size Press. range Control press. Cv Weight [mm] [inch] [ø mm] [PSI] [PSI] [oz.] A 3/8 NPT 1/4 63.0 0-565 56 / 84 8.2 141.09 A 7/16 NPT 3/8 63.0 0-565 56 / 84 8.2 141.09 A 9/16 NPT 1/2 100.0 0-565 56 / 84 11.8 148.15 A 3/4 NPT 3/4 100.0 0-565 56 / 84 32.9 169.31 A 1 NPT 1 100.0 0-565 56 / 84 47.0 188.71 I 3/8 NPT 1/4 63.0 0-565 56 / 140 8.2 56.44 I 7/16 NPT 3/8 63.0 0-565 56 / 140 8.2 56.44 I 9/16 NPT 1/2 63.0 0-565 56 / 140 11.8 56.44 I 3/4 NPT 3/4 63.0 0-565 56 / 140 32.9 77.60 I 1 NPT 1 63.0 0-565 56 / 140 47.0 98.77 I 1 1/4 NPT 1 1/4 100.0 0-565 56 / 140 83.5 179.90 I 1 1/2 NPT 1 1/2 100.0 0-565 56 / 140 121.1 236.33 431 224 J 431 225 K 431 226 L 431 227 M 431 228 W 431 217 K 431 218 U 431 219 V 431 220 S 431 221 P 431 222 Q 431 223 R 40

Three Piece Full Port Stainless Actuated Ball Valve (valve body) (actuator - pneumatic operation) øg 2.87 øg 2.66 øc F 0.98 F 1.81 B E A Port connection Flange full reduced ISO 5211 bore bore [inch] [inch] A B ø C NPT 1/4 F03 2.6 1.1 0.4 NPT 3/8 NPT 1/2 F03 2.6 1.1 0.5 NPT 1/2 NPT 3/4 F04 2.8 1.5 0.6 NPT 3/4 NPT 1 F04 3.8 1.6 0.8 NPT 1 NPT 1 1/4 F05 4.3 2.0 1.0 NPT 1 1/4 NPT 1 1/2 F05 4.6 2.2 1.3 NPT 1 1/2 NPT 2 F07 5.1 2.6 1.5 Orifice Port connection Actuator DN Full Reduced bore bore [inch] [inch] [inch] E F G 1/32 NPT 1/4 E (63) 5.8 7.5 3.1 7/16 NPT 3/8 NPT 1/2 E (63) 5.8 7.5 3.1 9/16 NPT 1/2 NPT 3/4 E (63) 5.8 7.9 3.1 3/4 NPT 3/4 NPT 1 E (63) 5.8 8.0 3.1 1 NPT 1 NPT 1 1/4 E (63) 5.8 8.4 3.1 1 1/4 NPT 1 1/4 NPT 1 1/2 G (100) 8.8 11.5 5.0 1 1/2 NPT 1 1/2 NPT 2 G (100) 8.8 12.0 5.0 Ball Valve Materials (valve body) 12 11 10 9 6 5 4 3 2 1 14 DIN specification 1. Body SS 1.4401 13 2. End cap SS 1.4401 3. Seat RPTFE 4. Body gasket PTFE / RPTFE 8 5. Nut SS 1.4301 7 6. Washer SS 1.4301 7. Bolt SS 1.4301 8. Packing Set PTFE 9. Bushing PTFE + graphite 10. Gland SS 1.4301 11. Belleville washer SS 1.4310 12. Lock saddle SS 1.4301 13. Stem nut SS 1.4301 15 14. Stem SS 1.4401 15. Ball SS 1.4401 2655 Accessories - Adapter plate for NAMUR pilot valve Pilot solenoid valve 6519 NAMUR see page 57 Description Material for actuator ø 63 mm Polyamide for actuator ø 100 mm Brass for actuator ø 100 mm Stainless St. 427 405 M 637 114 J 634 275 G 41

Ultra-Compact Angle-Seat Valve for neutral, aggressive fluids and steam up to 356 o F 2/2-Way, NPT 3 /8 - NPT 3 /4, 0-230 psig Normally closed Normally open 2000 Ultra- Compact Ultra compact: small size, low weight High reliability Waterhammer-free Optical position indication standard 2/2-Way, Angle-Seat The externally piloted angle-seat valve is operated by an ultracompact piston actuator. The angle-seat construction of the body makes possible extremely high flow rates, particularly in comparison to conventional globe valves. Pressure range Actuator housing Control medium Max. permissibile control pressure 0-230 psig (0-140 psig for steam) +14 o F... +356 o F +14 o F... +140 o F Bronze, 316SST PTFE Polyamide Neutral gases, air 140 psig Options Pilot Valves - Double-acting actuator with- Direct and quick mounting, out spring return (control please order separately function I) (see page 58-59). H 0.65 G 1/8 1.30 2.09 Variable dimensions [inch] 45 o 2000 Port Conn. Orifice Body A B C G H A/F [inch] [inch] material NPT 3/8 1/2 Bronze 2.56 5.36 0.41 0.75 4.61 1.06 NPT 3/8 1/2 St.Steel 2.56 5.56 0.41 0.75 4.45 1.06 NPT 1/2 1/2 Bronze 3.35 5.79 0.55 1.30 4.49 1.06 NPT 1/2 1/2 St.Steel 3.35 5.79 0.55 1.30 4.49 1.06 NPT 3/4 3/4 Bronze 3.74 6.11 0.55 1.42 4.69 1.26 NPT 3/4 3/4 St.Steel 3.74 6.11 0.55 1.42 4.69 1.26 A/F G A C ø D B Port C. Orifice Cv Max. operating Minimum required Actuator Flow Control pressure control pressure Size direction function [inch] [inch] [PSI] [PSI] [øinch] NPT 3/8 1/2 4.3 0-230 1) 55 1.58 above seat NPT 1/2 1/2 4.3 0-230 1) 55 1.58 above seat normally NPT 3/4 3/4 9.2 0-230 1) 85 1.58 above seat closed NPT 3/8 1/2 4.3 0-215 1) 55 1.58 below seat 2) NPT 1/2 1/2 4.3 0-215 1) 55 1.58 below seat 2) normally NPT 3/4 3/4 9.2 0-92.5 55 1.58 below seat 2) closed NPT 3/8 1/2 4.3 0-230 1) 30 1.58 below seat 2) NPT 1/2 1/2 4.3 0-230 1) 30 1.58 below seat 2) normally NPT 3/4 3/4 9.2 0-230 1) 30 1.58 below seat 2) open 1) Max. operating pressure with steam 140 PSI @ 356 o F 2) Waterhammer-free Item-No. Valve body material Bronze St.Steel 459 049 J 459 052 D 456 041 X 456 042 Y 456 043 Z 456 044 S 459 050 P 459 053 E 456 024 N 456 025 P 456 026 Q 456 027 R 459 051 C 459 054 F 456 034 Q 456 035 R 456 023 M 456 036 J 42

Intelligent Valve Systems for Process Control Decentralized Intelligence : Integrated PID-Controller with internal + external setpoint Commissioning: Programmable flow curveslinear, equal percentage, freely. 3 different input signals: frequency, PT100, 4-20 ma Networking: with multipin and fieldbus connections (ASi, Profibus, DeviceNet) 43

Angle-Seat Valve - Waterhammer-free for liquid applications 2/2-Way, NPT 1 /2 - NPT2 1 /2, 0-230 psig 50% more economical than ball valves Fit & Forget Service Life Normally closed 2000 Waterhammer-free Compact design with high flow rates 2/2-Way, Angle-Seat 2000 Angle seat valve with life-loaded self-adjusting packing, N-seal and intermediate relief and wiper system. Burkert s angle-seat construction of the body exhibits extremely high flow rates and unmatched cycle life. Pressure range Threaded connection Actuator housing Control medium Options - Normally open - Double-acting - Weld-end connection (SST version only) - TriClamp connection (SST version only) - Electrical position feedback - Independently adjustable stroke limitor: for high and low flow - Manual override - NAMUR-adapter for pilot valve mounting - Continuous control see page 50 - High ambient temp. actuator Pilot Valves Direct and quick mounting with Banjo and NAMUR valves, please order separately (see page 57-59). 0-230 psig +14 o F... +356 o F +14 o F... +140 o F Bronze, 316SST NPT PTFE Polyamide Neutral gases, air 0.85 G1/4 H ø D A/F C A B Variable dimensions [inch] 45 Flow direction F ø E Port Conn. DN Actuator A B C E F H A/F [inch] [inch] size [øinch] NPT 1/2 1/2 1.97 3.35 6.82 0.47 2.52 1.73 5.40 1.06 NPT 3/4 3/4 1.97 3.74 7.01 0.47 2.52 1.73 5.71 1.26 NPT 1 1 2.48 4.14 8.35 0.55 3.15 2.05 6.82 1.62 NPT 1 1/4 1 1/4 3.15 4.73 10.05 0.63 3.98 2.36 8.27 1.97 NPT 1 1/2 1 1/2 3.94 5.12 11.86 0.71 5.00 2.88 10.24 2.17 NPT 2 2 4.93 5.91 13.63 0.79 6.03 3.39 11.86 2.76 NPT 2 1/2 2 1/2 4.93 5.91 13.63 0.79 6.03 3.39 11.86 2.76 Port Orifice Cv Max. operating Minimum required Actuator Flow Control Connection pressure control pressure Size direction function [Inch] [inch] [PSI] [PSI] [øinch] NPT 1/2 1/2 4.9 0-230 55 1.97 below seat NPT 3/4 3/4 9.3 0-155 55 1.97 below seat NPT 1 1 22.1 0-155 60 2.48 below seat normally NPT 1 1/4 1 1/4 32.0 0-215 71 3.15 below seat closed NPT 1 1/2 1 1/2 48.9 0-177.5 62 4.93 below seat NPT 2 2 64.0 0-230 45 4.93 below seat NPT 2 1/2 2 1/2 104.9 0-140 45 4.93 below seat Item-No. Valve body material Bronze St.Steel 454 604 F 454 619 D 454 605 G 454 620 A 454 606 H 454 621 X 454 607 A 454 622 Y 456 067 Z 456 068 A 454 785 U 454 789 G 454 611 V 454 625 T 44