INSTALLATION INSTRUCTIONS Must be installed by licensed electrician. CLASS: 3425-15 3425-95 2017.V01
is Q-Tran s interior rated electronic power supply, utilizing the Xitanium driver from Advance. Suitable for surface or recessed mounting use. These drivers provide a VDC or VDC, constant voltage output, with optional dimming modules. HOUSING 18 gauge Welded Steel Enclosure: 14.5"W x 8.00"H x 4.00"D Door: 15.5"W x 9.00"H Knockouts: 25 Built-in support bracket incorporated to secure housing for surface mounting FEATURES Limited output voltage and current, plus isolation for safe operation Dimmable w/ additional Dimming Module Fully potted driver(s) for moisture resistance Suitable for dry and damp locations Suitable for surface or recessed mounting use Primary Voltage - Universal (0-277V ) Wide operating temperature range: -40 degf to 104 degf Fits up to (3): 60W VDC or (3):100W VDC driver(s) and dimming module(s) in the same housing 5 year warranty Driver has Class A sound rating Class 2 Output CSA #2399 Low Voltage Lighting Systems : CSA Class 3425-15 and Class 3425-95 : CSA Standard C22.2 No. 250.0-08 - Luminaires : ANSI/ UL Standard 2108 - Low Voltage Lighting Systems : CSA Std C22.2 No 250.13-14 - Light Emitting Diode (LED) Equipment for Lighting Applications : ANSI/ UL Standard 8750 - Light Emitting Diode (LED) Equipment for Use in Lighting Products WIRE LENGTH TAE VDC (W) 25 60 17 25 40 80 100 10 AWG AWG 14 AWG 16 AWG 18 AWG 20 AWG 22 AWG AWG 26 AWG (5.6mm 2 ) (3.3mm 2 ) (3.0mm 2 ) (1.3mm 2 ) (0.78mm 2 ) (0.50mm 2 ) (0.33mm 2 ) (0.20mm 2 ) (0.13mm 2 ) 315 198 5 78 49 31 19 7 115 7 72 4 45 3 28 18 11 7 4 3 897 564 355 223 140 88 55 35 22 567 356 2 141 88 56 35 22 14 309 194 2 77 48 30 30 7 130 82 51 32 20 13 8 5 3 84 53 33 21 13 8 5 3 Distances are based on a 5% Voltage drop max. VOLTAGE DROP CHART This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. If dimming with optional dimming module, use a dimmer rated for operation. Model 1 Size 60W 0W 180W 100W 200W 300W 2 Primary Voltage Size UNV: 0-277 Vrms 3 Secondary Voltage 14.5" Prim. V UNV VDC VDC 4 Dimmer 5 Options TOP TRAY Max Load (Watts) LED DRIVER 3 LED DRIVER 2 LED DRIVER 1 1x60W 2x60W 3x60W 1x100W 2x100W 3x100W.875" 9 Knockouts of 0.875" Hole for 1/2" fitting OERING GUIDE Secondary Voltage(/VDC) VDC VDC VDC VDC VDC VDC BOTTOM TRAY Sec. V DIM WH White ( Standard ) BK Black Powder Coat Finish Ordering Example Max Prim. Amps @ 0V 0.60 A 1.20 A 1.80 A 0.95 A 1.90 A 2.85 A NOTE: 16 additional side knockouts -100-UNV/ LOW VOLTAGE LIGHTING SYSTEM CLASS: 3425-15 3425-95 - - - - Opts @ Max 277V Prim. Amps Max Prim. @ 277V 0.29 A 0.58 A 0.87 A 0.40 A 0.80 A 1.20 A 8.00" 4.00" 1
Housing & Mounting Options QTM HOUSING 1/4" Rod Thru Hole 14.5" 8.00" 3/8" Rod Thru Hole Double Sided Key Hole 4.00" 0.875" KNOCKOUT 9X (FOR 1/2" FITTINGS) 8.00" 4.00" ISOMETRIC VIEW BOTTOM VIEW NOTE: Bracket can also be mounted (Top & Bottom) for Vertical Mounts. MOUNTING OPTIONS RECESSED SURFACE HORIZONTAL VERTICAL RECESSED MOUNT ROD SUSPENSION (Horizontal) ROD SUSPENSION (Vertical) SURFACE SPACING SURFACE STACKING ROD SUSPENSION 9.5" O.C. 19" O.C. Vertical 9.5" O.C. 16" O.C. 9.5" O.C. More Units can be stacked Plenum Door Required Horizontal More Units can be stacked More Units can be stacked NOTE: Rods not included. 2
Driver with no Dimming Module LED DRIVER 1 (0-277V) LED DRIVER 2 (0-277V) LED DRIVER 3 (0-277V) Output Load Output Load Output Load Input Load Negative Positive #0674 FT. Q-TRAN RIP STRIP TM P/N 988182M iq-led iq-led iq-led 3
Driver with Dimming Module LED DRIVER 1 LED DRIVER 2 LED DRIVER 3 2 3 Negative Positive Output Load Output Load Output Load Dimmer control Input Load #0674 FT. Q-TRAN RIP STRIP TM P/N 988182M iq-led iq-led iq-led DIMMING* *Customer provided 4
: Adjustable White Driver with Dimming Module LED DRIVER (0-277V) LED DRIVER (0-277V) Output Load Output Load Input Load Output Load Output Load iq-led DIMMING WARM* DIMMING SOFT* S W V *Customer provided 5
CSA LABEL CSA REQUIREMENTS Suitable for Indoor use This power supply must be installed according to the National Electric Code and local codes and ordinaces and in accordance with applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Wear rubber shoes and work on a sturdy wooden or fiberglass ladder. This power supply is to be installed in a location where it is not likely to be contacted by non-electricians. To avoid a hazard to children, account for all parts and destroy all packaging materials. INPUT VOLTAGE 0V - 277V OUTPUT VOLTAGE V V CONTROL TYPE Model Input Voltage (V) Input Current (A) Frequency Nominal Output Voltage (VDC) Nominal Output Wattage (W) WIRE CONNECTION WITHOUT DIMMER -60-0 -180-100 -200-300 0.60 / 0.29 1.20 / 0.58 1.80 / 0.87 0.95 / 0.40 1.90 / 0.80 2.85 / 1.20 60 0 180 100 200 300 Red = V Blue = -V WITH DIMMER WIRE CONNECTION WITH DIMMER Red = V White = -V Type Ic Recessed, Inherently Protected Type IC ENCASTRE, PROTECTION INHÉRENTE For Supply Connections Use Wire Rated For At Least 60 C. Suitable For Damp Locations CONVIENT AUX EMPLACEMENTS HUMIDES Cycle Class 1 or Class 2 This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D'INSTALLATION PERTINENT, PAR UNE PERSONNE QUI CONNAÎT BIEN LE PRODUIT ET SON FONCTIONNEMENT AINSI QUE LES RISQUES INHÉRENTS. LOW VOLTAGE LIGHTING SYSTEM Q-Tran, Inc. CLASS: 3425-15 3425-95 WARNING: RISK OF FIRE. IF INSTALLATION INVOLVES RUNNING WIRE THROUGH A BUILDING STRUCTURE, SPECIAL WIRING METHODS ARE NEEDED. CONSULT A QUALIFIED ELECTRICIAN Q-TRAN, INC. MILFO, CT U.S.A. (203) 367-8777 WWW.Q-TRAN.COM 2016, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - sales@q-tran.com - www.q-tran.com 6