FIRE TUBE Design pressure up to 21 bar Steam production from 1.500 to 15.000 Kg/h INDUSTRIAL BOILER ITALY S.R.L. Offices and Production Unit: Via E. Fermi, 64/66-24050 GRASSOBBIO (BG) Cod. Fisc. / P.IVA 04024170161 REA: BG-428870 www.industrialboileritaly.com - info@industrialboileritaly.com Tel: +39 035 0521398 Fax: +39 035 0521 443
Description Standardkessel s Condor Classic steam boiler is a pressurized boiler, three pass design with a completely wet back. It has been especially designed for the combustion of both liquid and gaseous fuels and it is supplied with the all accessories according to the currently norms for an automatic functioning. The Condor Classic fascinates for its simplicity and the maintenance does not request any dismounting. The steam boiler has been designed according to the most advanced techniques by highly qualified personnel in our factory. The tube plates are manually drilled at cold in order to maintain physical characteristics of the material. The construction is performed according to the European directive P.E.D. 97/23/CE with calculations code VSG rev. 95. All joints are accurately electric welded and are executed with manual/automatic process. Those weldings are also certified EN288/3. More over, the following non destructive controls are made with presence of a certified inspector: Ultrasonic test on the combustion chamber inspection hole X-rays on the crosses and weldings Penetrant liquid on the corner weldings The exchange area is particularly vast in order to maintain low specific thermal loads and high efficiency even during high rate continuously. The particular position of the smoke tubes around the fire room ensures a fair distribution of the smokes. The smoke tubes are internally smooth and free from any loose turbulator to facilitate easy maintenance ensuring also a constant high speed which avoids the soot residues, involving thus a constant efficiency. The steam boiler Condor Classic has been famous for over 40 years for its strong construction and long working life. Condor Classic are particular for: Oversized and totally wet exchange surface Low thermical load No turbulators Manual drilling on the smoke tube plates to maintain the physical characteristics Hole reaming on the smoke tube plates Expanding smoke tubes Perfect adaptability for the liquid and gaseous fuels High and constant thermal efficiency Easy maintenance.
Boiler versions STANDARD VERSION Steam boiler Condor Classic in standard version with 3 pass design. ECO VERSION Steam boiler Condor Classic with ECONOMIZER for the preheating of the water inlet. This version is supplied with a modulating regulation. PRE-HEATER VERSION Steam boiler Condor Classic with PREHEATER for the comburent air preheating. With this version the burner is supplied with a separate fan. STEAM HEATER VERSION Steam boiler Condor Classic with STEAM HEATER for the production of superheated steam. We can add to this version an ECONOMIZER or a PREHEATER.
Equipments Pos. Description Pos. Description 1 Water level limiter electrocode 13 Feedwater pump check valve 2 Safety pressure switch 14 Interception valve 3 Regulation pressure switch 15 Check valve 4 Regulation / modulation pressure switch 16 Feedwater interception pump 5 Manometer 17 Steam injector 6 Safety valves 18 Steam injector main valve 7 Level indicators 19 Blowdown interception valve 8 Floating level regulators 20 Manual blowdown valve 9 Interception valve for floating regulators 21 Main steam valve 10 Drain valve (floating regulator) 22 Control panel 11 Drain valve (instrumentation tube) 23 Burner 12 Feedwater pump complete with engine
Boiler dimensions Model Steam production Capacity A B C D E ØF Kg/h kw mm mm mm mm mm mm 2500 2500 1744 5240 4100 2500 2700 2600 550 3000 3000 2093 6300 5200 2500 2700 2600 550 3500 3500 2442 5650 4500 2500 3000 3000 550 4000 4000 2791 5700 4500 2500 3000 2850 600 4500 4500 3140 6100 4600 2500 3000 2850 600 5000 5000 3488 6600 5400 2500 3000 2850 600 6000 6000 4186 6850 5500 2700 3200 3200 700 7000 7000 4884 7300 5750 300 3400 3350 700 8000 8000 5581 7400 6200 300 3400 3350 800 9000 9000 6279 7850 6300 3200 3600 3570 800 10000 10000 6977 8000 6450 3200 3700 3660 800 12000 12000 8372 8600 6900 3400 3750 3680 850 14000 14000 9767 9300 7700 3700 4100 4050 900 15000 15000 10465 9400 7700 3700 4100 4050 900
From the commitment in the technological research of Standardkessel Italiana and Standardkessel International, always specialized in the high powered industrial boilers, are born the SKI generators which are carried out by means of innovative processes that ensure a high efficiency and a long lifespan. Water-tube, smoke-tube, diathermal-oil industrial boilers and complete thermal power plants. INDUSTRIAL BOILER ITALY S.R.L. Offices and Production Unit: Via E. Fermi, 64/66-24050 GRASSOBBIO (BG) Cod. Fisc. / P.IVA 04024170161 REA: BG-428870 www.industrialboileritaly.com - info@industrialboileritaly.com Tel: +39 035 0521 398 Fax: +39 035 0521 443