DEENBANDHU CHOTURAM UNIVERSITY OF SCIENCE & TECHNOLOGY, MURTHAL (DEPARTMENT OF MECHANICAL ENGINEERING) List of Equipments/Apparatus: SOM LAB.

Similar documents
Faculty of Mechanical Engineering B.E. Mechanical Engineering (Sandwich) (R 2013) Semester III. Requirements for a batch of 30 students

DETAILS OF EQUIPMENTS/TOOLS OF VARIOUS SHOPS IN WORKSHOP (MECHANICAL ENGG.) Name of Article. Fitting Shop (Workshop)

Department of Mechanical Engineering Name of Lab: - Power Engineering

Faculty of Mechanical Engineering B.E. Automobile Engineering (R 2013) Semester III

Motor Vehicle Engineering

Theory of Machines. CH-1: Fundamentals and type of Mechanisms

NADAR SARASWATHI COLLEGE OF ENGINEERING AND TECHNOLOGY VADAPUDUPATTI, THENI DEPARTMENT OF MECHANICAL ENGINEERING LAB FACILITIES

Programme area 4a. Fluid Energy Machines

DYNAMICS LABORATORY. AIM: To apply the knowledge gained in kinematics and dynamics of machines to real system.

ME6401 KINEMATICS OF MACHINERY UNIT- I (Basics of Mechanism)

What is a Mechanism?

KINEMATICS OF MACHINARY UBMC302 QUESTION BANK UNIT-I BASICS OF MECHANISMS PART-A

TYPICAL EXPERIMENTS Centers of gravity. Force triangle. Force polygon and Bow s Notation. Non- concurrent forces.

Code No: R Set No. 1

Department of Mechanical Engineering University of Engineering & Technology Lahore(KSK Campus).

Theory of Mechanisms and Machines

TENDER NOTICE Sealed tenders affixed with revenue stamp of Rs. 5/- are invited for and on behalf of Vice Chancellor, Islamic University of Science &

1.1 : Kinematics of Machines

BRCM COLLEGE OF ENGINEERING & TECHNOLOGY BAHAL, BHIWANI Practical Experiment Instructions Sheet

SHREE RAMCHANDRA EDUCATION SOCIETY S LONIKAND, PUNE DEPARTMENT OF MECHANICAL ENGINEERING LAB MANUAL. Applied Thermodynamics (ATD) Semester-IV

L15 Dynamics & Vibration Laboratory

GOVERNMENT ENGINEERING COLLEGE, GODHRA

Hours / 100 Marks Seat No.

HYDRAULICS. H89.8D - Hydraulic Bench

2. a) What is pantograph? What are its uses? b) Prove that the peaucellier mechanism generates a straight-line motion. (5M+10M)

St.MARTIN S ENGINEERING COLLEGE Dhulapally, Secunderabad

INDEX. PAGE Adjustment mechanism for radial position of block on rotating

AIISHIL INTERNATIONAL

R10 Set No: 1 ''' ' '' '' '' Code No: R31033

Driver Driven. InputSpeed. Gears

Faculty of Mechanical Engineering B.E. Marine Engineering (R 2013) Semester III FLUID MACHINERY LABORATORY

CHENDU COLLEGE OF ENGINEERING & TECHNOLOGY DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK IV SEMESTER

Automobile. Automobile> Automobile Educational System>Automotive Engine Automobile> Automobile Educational System>Automotive Transmission...

Measurements Lab (620451):

Question 8 Engineering Higher Level

MECHANISM: TRANSMISSION THE TYPE OF INPUT MOVEMENT IS THE SAME AS THE OUTPUT TRANSFORMATION THE MECHANISM TRANSFORMS THE TYPE OF MOVEMENT



Performance Test On 2 Stroke Petrol Engine Lab

MECHANICAL IEEE PROJECT TITLES 2015 LeMeniz Infotech

Automobile section, showing different parts in detail. and miscellaneous devices.

Elements of Mechanical Engineering (EME) QUESTIONS

R.K. Scientific & Engg. Works

Product design: Mechanical systems

Changes in direction.! Using pulleys with belts

EME MCQ QUESTION BANK

Mechanisms. Prepared by Juan Blázquez, Alissa Gildemann

FIRSTRANKER. 2. (a) Distinguish (by neat sketches) betweenpeaucellier mechanism and Hart mechanism.

FRICTION DEVICES: DYNAMOMETER. Presented by: RONAK D. SONI Assistant Professor Parul Institute of Technology, Parul University

WINTER 14 EXAMINATION

05 Marks (c) Sketch and explain Lancashire Boiler.

Al- Ameen Engg. College. Fluid Machines. Prepared by: AREEF A AP/ ME AL AMEEN ENGINEERING COLLEGE Shoranur.

INSTITUTE OF AERONAUTICAL ENGINEERING

Dr.Babasaheb Ambedkar Technological University, Lonere List of Equipment to be purchased under Shopping mode TEQIP II

Code No: R Set No. 1

III EC6362 ELECTRONIC CIRCUITS AND DIGITAL LABORATORY

INSTITUTE OF AERONAUTICAL ENGINEERING

Transmission systems: Multiple components that have the same type of movement (rotational, linear, etc)

TECHNOLOGY MECHANISMS

Moments. It doesn t fall because of the presence of a counter balance weight on the right-hand side. The boom is therefore balanced.

COOPERATIVE PATENT CLASSIFICATION

1. (a) Discuss various types of Kinematic links with examples. (b) Explain different types of constrained motions with examples.

Part VII: Gear Systems: Analysis

KINGS COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING

'' ''' '' ''' Code No: R R16 SET - 1

Illustrated Parts List Vanguard to Compliance

CHAPTER-3 EXPERIMENTAL SETUP. The experimental set up is made with necessary. instrumentations to evaluate the performance, emission and

Brake Test On Three Phase Induction Motor Lab Manual

SYED AMMAL ENGINEERING COLLEGE

BHARATHIDASAN ENGINEERING COLLEGE DEPARTMENT OF MECHANICAL ENGINEERING ME6401- KINEMATICS OF MACHINERY QUESTION BANK

INDEX. 414 Agitator reversing mechanism which varies point of reversal. 250 Alternate and intermittent drive for two shafts

Mã số EB7660TH PETROL BLOWER

Œ æ fl : GΔ»ÊflMmÈ A±È BMf æ fl MVÈ

LAB MANNUAL ENERGY CONVERSION

UNIT III TRANSMISSION SYSTEMS CONTENTS: Clutch-types and construction Gear boxes- manual and automatic Gear shift mechanisms Over drive Transfer box

MEB THERMAL ENGINEERING - I QUESTION BANK UNIT-I PART-A

Lab Manual Elements of Mechanical Engineering ( )

rev 9_ EB7650WH

Mechanics and Mechanisms. What is do you think about when you hear the word mechanics? Mechanics. Is this a mechanism? 2/17/2011

UNIVERSITY POLYTECHNIC B.I.T., MESRA, RANCHI COURSE STRUCTURE. (W.E.F Batch Students) (Total Unit 7.5) Sessional Unit Code

Machines and mechanisms

Department of Mechanical Engineering Laboratories

CHAPTER 6 GEARS CHAPTER LEARNING OBJECTIVES

Illustrated Parts List to

TECHNICAL MANUAL DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

LIST NO.E085 ENGINE. ENGINE BRUSH CUTTER Model CG 24EASP (E1)

LIST NO.E086 ENGINE. ENGINE BRUSH CUTTER Model CG 27EASP (E1)

didactecsanderson Mechanical & Automotive mechanisms MAM Mechanical Engineering Laboratory Apparatus Mechanical Engineering Laboratory Apparatus

B.TECH III Year I Semester (R09) Regular & Supplementary Examinations November 2012 DYNAMICS OF MACHINERY

Heat engine. Heat engine

Parts Description 2 1/2 Ton Multi-Fuel Part Number NSN

BASIC CIVIL & MECHANICAL ENGINEERING

Attention is drawn to the following places, which may be of interest for search:

Suggested list for the Hydraulic and Pneumatic lab Instruments Mechatronics Engineering Department School of Applied Technical Science


KUBOTA WATER-COOLED DIESEL ENGINE

Chapter 14 Small Gas Engines

Figure 8-1. Frame and External Parts - Coil Chain Models.


PARTS MANUAL. RGD5000 Generator. Model. PUB-GP1204 Rev. 7/98

Transcription:

DEENBANDHU CHOTURAM UNIVERSITY OF SCIENCE & TECHNOLOGY, MURTHAL (DEPARTMENT OF MECHANICAL ENGINEERING) List of Equipments/Apparatus: SOM LAB. Sr. Nos. Name of items Qty. 1. Brinell hardness testing m/c 01 2. Rockwell hardness testing m/c 01 3. Vickers hardness testing m/c 01 4. Erichsen sheet metal tester 01 5. Torsion testing m/c 01 6. Universal testing m/c 01 7. Pendulum impact tester 01 8. Budh lindlay extensometer 01 9. Variable gauge length extensometer 01 List of Equipments/Apparatus: RAC LAB. Sr. Nos. Name of items Qty. 1. Refrigeration test rig 01 2. Mechanical heat pump 01 3. Air conditioning tutor 01 4. Air conditioning test rig 01 5. Ice plant test rig 01 6. Cut sectional model of chilling plant 01 7. Cut sectional model of reciprocating compressor 01 8. Cut sectional model of root blower 01 9. Window a/c test rig 01 10. Cut sectional model of rotary compressor 01 List of Equipments/Apparatus: Materials Science Lab. Sr. nos. Name of items Qty. 1 Metallurgical micro scope 1 2 De-Form Software V11.01 1 3 Muffle Furnace 1 4 Jomini Quench Apparatus 1 List of Equipments/Apparatus: Measurement & Instrumentation Lab. Sr. Name of items Qty. nos. 1 Oscilloscope 01 2 Linear displacement transducer 01 3 Low pressure transducer 01 4 high transducer 01 5 Load measurement tutors 01 6 Displacement measurement tutors 01 7 Strain measurement tutors 01

List of Equipments/Apparatus: KOM LAB Sr. nos. Name of items Qty. 1. Spur gear 9115 01 2. Bevel gear 9155 01 3. Helical gear 9156 01 4. Spiral gear 9159 01 5. Rack & pinion model 9165 01 6. Flexible coupling 9262 01 7. Oldham coupling 9266 01 8. Belt drives single stage/speed 9226 01 9. Belt drives two stage 9227 01 10. Belt drive loose & fast pulley 9228 01 11. Swivel bearing 9243 01 12. D slide valve steam engine 10170 01 13. Belt friction apparatus 01 14. Pantograph mechanism 01 15. Whitworth quick return mechanism 01 16. Quick return mechanism slotted lever type 01 17. Single stage spur gear 01 18. Shaper model 01 19. Model of ordinary governors (a) Centrifugal (b) Governors model 01 20. Compound screw jack 01 21. Crony (Prony) brake dynamometer 01 22. Crank & connecting rod Model 01 23. Slider crank mechanism i.e. (i) Reciprocating engine mechanism, (ii) Oscillating cylinder Set of 03 mechanism, (iii) Whitworth quick return mechanism 24. Kinematic pairs i.e. Sliding pair, Screw pair (2 type) Spherical pair, Rolling pair(2 type), Turning pair, Completely constrained motion, Gear wheels(2 type), Links(2 type), all are mounted on wooden board 01 set 25. Cam & follower (Five on wooden board) 01 26. Four bar links mechanism 01 27. Scotch yoke mechanism 01 28. Watts mechanism 01 29. Pulley models i. e. A, B, C, D (9225) 04 30. Union joint model mounted on base (wooden) 01 31. Interference & Undercutting 01 32. Rope brake dynamometer 01 33. Whirling of shaft VB-2 01 List of Equipments/Apparatus: DOM LAB Sr. nos. Name of items Qty. 1. Tachometer Kay C make 01 2. Pendulum with base ring knife edge without stop watch 02 3. Loaded governor 01 4. Governor model with rotator 01 5. Screw efficiency apparatus 01 6. Cam analysis machine VB-1 01 7. Universal governor apparatus TM-4 01 8. Static & Dynamic Balancing Machine 01 9. Motorized Gyroscope TM-1 01 10. Standard gyroscope 11. Gyroscope with counterpoise 12. Bicycle wheel gyroscope

List of Equipments/Apparatus: EME LAB 1. Compound Screw Jack 02 2. Screw Jack 810 ME Simple 01 3. Worm & Worm Wheel (Single) 02 4. Worm & Worm Wheel (Double) 02 5. Worm & Worm Wheel (Triple) 02 6. Double Purchase Winch Crab with wall Bracket 01 7. Double Purchase Winch Crab with wall Bracket 01 8. Winch Hoisting Crab-274 ME 01 List of Equipments/Apparatus: AUTO LAB 1 Dynamo Armature with bearing plate 01 2 Automatic Electric Training Bench 01 3 Epicyclical Gear 01 4 Differential Gear 01 5 Conical Friction Clutch 01 6 Band Brake 01 7 Universal Coupling 01 8 Hooks Coupling (Single) 01 9 Hooks Coupling (Double) 01 10 Reversing Gear 01 11 P-Carburetor 01 12 Fuel Pump 01 13 Distributor Assembly 01 14 Piston Ring 01 15 Valve EVL 01 16 Cam Shaft 01 17 Crank Shaft 01 18 Propeller Shaft 01 19 Automobile Wheel Assembly 01 20 Proving Ring Compression Assembly 01 21 Steering Mechanism 01 22 Hydraulic Brake Model 01 23 Mechanical Brake Model 01 24 Winkle Engine Model 01 25 Clutch Plate 01 26 Motor Car Gear Box 01 27 Cylinder Block & Piston Assembly 01 28 Differential Gear box Assembly with Hub & Gear 01 29 Steering Mechanism 01 30 Gear Box Assembly along with Lever Gear System 01 31 Self Starter 01 32 Fuel Supply System Petrol Engine Model 01 33 Fuel Supply System Diesel Engine Model 01 34 Internal Expanding Brake 01 35 Model of Centrifugal Clutch 01 36 Dynamo (Lucas TVS) 01 37 Valve Seat Grinding 01 38 Spark Plug 01 39 Clutch Assembly 01

List of Equipments/Apparatus: ENERGY CONVERSION LAB 1. Steam Turbine Test Rig with Separating Throttling Calorimeter, Steam Flow meter & 01 Vertical Oil Fired Boiler TS-300 2. Air Compressor Single Stage Test Rig 01 3. Reducing Valve 01 4. Anti Priming Pump 01 5. Water Gauge Model 01 6. Expansion Steam Trap 01 7. Bourdon Pressure Gauge Large 01 8. Combined High Steam & Safety Valve 01 9. Cornish Boiler 01 10. Surface Condenser Model 01 11. Fusible Plug Set (03) 01 List of Equipments/Apparatus: I C ENGINE LAB 1. 4 Stroke 4-Cylinder Petrol Engine Test Rig 01 2. 4 Stroke 2-Cylinder diesel Engine Test Rig 01 3. 2 Stroke Engine Test Rig Consisting of 2 Stroke Engine Eddy Current Dynamometer etc. 01 4. Exhaust Gas Analyzer AVL make 422 Analyze COHC 01 5. Computerized Diesel Engine Test Rig 01 6. 2 Stroke 1-Cylinder Petrol Engine Test Rig 01 7. Uni-Insta, 4 Stroke 1-Cylinder Water Cooled 10 HP 01 8. Gassifire Set 01 9. 4-Cylinder Petrol Engine Model 01 10. Cut Section Model of 4-Stroke Diesel Engine 01 11. Exhaust Gas Analyzer,R-89 Model-KAL, USA made 01 12. Section Working Model of 4-Stroke Petrol Engine 01 13. Section Working Model of 2-Stroke Petrol Engine 01 List of Equipments/Apparatus: VIBRATION LAB S. No. Name of Items with Qty. Specification 1. VIBRATION ROTOR KIT 01 2. TWO CHANNEL PORTABLE FFT ANALYZER 01 List of Equipments/Apparatus: MECHATRONICS LAB S. No. Name of Items with Qty. Specification 1. DESKTOP P.C 02 2. MECHATRONICS TRAINING PACKAGE 01 3. HYDRAULIC & ELECTRO-HYDRAULIC KIT 01 4. PNEUMATIC & ELECTRO- PNEUMATIC TRAINING KIT 01 5. EDUCATIONAL ROBOT TRAINING SYSTEM 01 6. GENERAL PURPOSE MEMORY STORAGE 01

List of Equipments/Apparatus: FLUID MACHINES LAB S. No. Name of Equipments Qty. 1. Pelton turbine test rig 01 2. Francis turbine test rig 01 3. Kaplan turbine test rig 01 4. Hydraulic Ram test rig 01 5. Variable speed centrifugal pump test rig 01 6. Multistage centrifugal pump test rig 01 7. Gear oil Pump Test rig 01 8. Reciprocating pump Test Rig 01 List of Equipments/Apparatus: FLUID MECHANICS LAB S. No. Name of Equipments Qty. 1. Test rig for pipe friction, losses across bend, Valve, Venturimeter, Orificemeter & Nozzle 01 2. Test rig for bernoullies theorem 01 3. Water table for flow visualization 01 4. Test rig to study free flow thru orifice, nozzle & V Notch 01 5. Metacentric Height Apparatus 01 6. Vortex Flow Apparatus 01 List of Equipments/Apparatus: HEAT TRANSFER LAB 1. Parallel Flow Counter Flow Heat Exchanger 01 2. Pool Boiling Apparatus 01 3. Heat Pipe Demonstrator 01 4. Forced Convection Apparatus 01 5. Emmisity Measurement Apparatus 01 6. Natural Convection Apparatus 01 7. Thermal Conductivity of Insulating Powder 01 8. Heat Transfer in Pin Fin Apparatus 01 9. Cooling Tower Test Rig 01

List of Equipments/Apparatus: CAD LAB 1. MODEL OF STUFFING BOX 01 2. MODEL OF COTTER JOINT 01 3. MODEL OF KNUCKLE JOINT 01 4. MODEL OF PISTON WITH RING 01 5. ESSENTRIC MODEL (10195) 01 6. RIVETTED JOINTS (9288) 01 7. MODEL OF INTER PENETRATION 01 8. PROJECTION OF STRAIGHT LINE GLASS 01 9. PROJECTION OF STRAIGHT LINE WOOD 01 10. FLOAT STEAM TRAP 01 11. STOP VALVE HOPKINGON TYPE 01 12. FEED CHECK VALVE 01 13. SOCKET & SPIGOT JOINT 01 14. BOX OR MUFF COUPLING 01 15. SPLIT MUFF COUPLING 01 16. CROSS HEAD 01 17. KEY SET (05 No.) 01 18. LEVER SAFETY VALVE 01 19. WALL BRACKET 01 20. BLOW OF COCK (10148) 01 21. RIVET 4 TYPE (9282) 01 22. DEAD WEIGHT SAFETY VALVE 01 23. PLUMBER BLOCK WOODEN AND IRON WITH BODY WITHOUT BOLT 01 24. J HANGER BRACKET 01 25. WOODEN MODEL WITH C/ ROD 01 26. COMPUTER HCL (P IV) 05 27. COMPUTER ACER (P IV) 04 28. COMPUTER HP Duel Core E-6550 36 29. MODEL OF INTER PENETRATION 01 30. MULTIMEDIA PROJECTOR CP-X-251 01 (HITACHI 2100) 31. PLOTTER HP INKJET SIZE A-4 REVOLUTION IN DPI(600X600X2100) 01 32. SCANNER HP 5590A-4 SIZE WITH USB PORT 01 33. IDEA SA 300 EDU.12M ARTISAN 04 34. COMPUTER HP P-IV 15 35. AUTOCAD EDUCATIONAL SOLUTION 01 36. BOOST & FIRE AVL CD 01 37. ANSYS SOFTWARE CD 01 38. MULTIMEDIA PROJECTOR CP-X-251 01 (HITACHI 2100) 39. PLOTTER HP INKJET SIZE A-4 REVOLUTION IN DPI(600X600X2100) 01 40. IDEA SA 300 EDU.12M ARTISAN 04

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback