Industrial Pumps WANNER ENGINEERING INC
Durability, performance and simplicity of design make Hydra-Cell pumps the optimum choice for the widest range of pump applications. When we say Simply Built to Last, we mean it! Wanner Engineering Hydra-Cell pumps have proven their performance and reliability in many of the toughest industrial equipment and process applications. Our customers are found in virtually every market sector of industry, but they all share the same concern; they all require pumps to keep their plants and equipment running... Reliably! Agricultural & lawn care Automatic car washes Chemical processing Food & drug High pressure machine tool coolant Metering and dosing chemical additives Mining Oil production & refining Paper & pulp Parts washing Pressure washing Reverse osmosis Water and wastewater
Hydra-Cell positive displacement pumps handle the difficult fluids that destroy other pumps. Hydra-Cell pumps handle a lot more than just clean water! Hot fluids Reclaim water Corrosive fluids Slurries Abrasives Liquid gases Wettable powders Fertilizers Cutting fluids Viscous fluids Ultrapure fluids Chemicals Adhesives Soap solutions Salt water and many more...
1 7 8 The Hydra-Cell Pump... Simply Built to Last! Hydra-Cell Design Advantages Positive displacement with smooth, low pulse output Heavy-duty industrial construction for long service life in harsh conditions Hydraulically-balanced, unstressed diaphragms Wide range of flow rates from 0. to 18 l/min and pressures up to 17 bar Repeatable, accurate output ideal for metering and dosing Sealless design can pump particles in suspension Flexible installation with a variety of mounting configurations Minimal maintenance; no cups, packings or seals can even run dry! Wide choice of materials of construction for pump heads, diaphragms and valve assemblies High efficiency low power consumption 1 7 8 Drive shaft via electric motor, hydraulic motor, belt and pulley, etc. Roller bearings rigid support, immersed in lubricating oil bath Fixed-angle cam translates rotary motion into linear to the hydraulic cells Hydraulic cells displace diaphragms via pressurised oil Diaphragms hydraulically balanced, no stress during flexing Inlet valve assemblies simple design, allows liquid into pump chamber Outlet valve assemblies allows liquid to flow into pressure discharge line Pressure regulating valve controls output pressure and prevents pump overload
Materials of Construction Pumping Head Diaphragms 1 Stainless Steel Buna-N-XS Brass EPDM Cast Iron Neoprene Hastelloy Teflon Kynar Viton -XT Polypropylene Design and Manufacturing Standards High volume, precise manufacturing Extensive inventory and worldwide distribution Minimal leadtimes Design engineering services Consistent unit-to-unit quality 100% testing prior to shipment After more than thirty years of designing, manufacturing, testing, and constantly improving Hydra-Cell pumps, we are confident that we are producing a great product in a timely, cost-efficient manner. BIll Wanner
PRESSURE bar 17 10 1 100 7 G-0 G-1 G-17 Hydra-Cell Selection 0 G-0 G-0 G-10 G-1 G- G- 0 0 10 0 0 0 0 0 70 80 90 100 110 10 10 10 FLOW l/min G-0 Metallic Heads: G-0: 70 bar; G-1 & G-: 100 bar Non-Metallic Heads: All Models: 17 bar rpm I/min rpm l/min G-0-X 10.9 170. G-0-E 10. 170.8 G-0-S 10 1. 170.1 G-0-B* 10 1.0 170 1. G-0-G* 10 0. 170 0.8 G-0-X 00 G-0-E 9 G-0-S 90 G-0-B* 100 G-0-G* 0 Max Inlet Pressure 7 bar Metallic Heads: Non-Metallic Heads: 1/ inch BSPT /8 inch BSPT G-0: 19 mm hollow shaft G-1 & G-: 19 mm Ball bearings 0.1 litres. kg.1 kg G-0 G-0 G-0 Metallic Heads G-0-X: 70 bar G-0-S, E, B, G: 8 bar Non-Metallic Heads All models: 17 bar rpm I/min rpm l/min G-0-X 10 9.9 170 11. G-0-E 10 7.1 170 8. G-0-S 10. 170.8 G-0-B* 10. 170. G-0-G* 10 1. 170 1.9 G-0-X 1 G-0-E 0 G-0-S 8 G-0-B* 1 G-0-G* 90 Max Inlet Pressure 17 bar Metallic Heads: Non-Metallic Heads: 1/ inch BSPT /8 inch BSPT G-0: 7/8 inch G-1: mm hollow shaft Ball bearings 0.9 litres 1.7 kg 8. kg * May require pressurised inlet. Performance specifications are guidelines only.
G-0 170 bar rpm I/min rpm l/min G-0-X 10 9.0 170 11.0 G-0-E 10. 170 7.8 G-0-S 10. 170.1 G-0-X 19 G-0-E G-0-S 87 Max Inlet Pressure bar 1/ inch BSPT 1/ inch BSPT 7/8 inch Ball bearings 1.0 litres 1.8 kg G-10 (Horizontal) G-1 (Vertical) Metallic Head: Non-Metallic Head: G-10, G-1: 70 bar G-10: 17 bar rpm I/min rpm l/min G-10/1-X 10 9.0 10 9.0 G-10/1-E 10. 170 0. G-10/1-S 10 18.9 170.7 G-10/1-I 10 1. 170 1.9 G-10/1-X 0 G-10/1-E 8 G-10/1-S 71 G-10/1-I 117 Max Inlet Pressure 17 bar Metallic Heads: Non-Metallic Heads: 1 inch BSPT / inch BSPT 7/8 inch Tapered roller bearings 1.0 litres G-10: kg; G-1: 9 kg G-10: 1 kg G-0 G-10 G-1 G-1/17 G-1 (Horizontal) G-17 (Vertical) 170 bar @ 100 rpm; 10 bar @ 10 rpm rpm bar I/min rpm bar I/min G-1/17-X 10 100 0 10 10 8 100 170 9 90 170 G-1/17-E 10 7 170 100 7 10 10 170 100 100 170 10 10 90 170 9 110 170 bar G-1/17-X 100 9. 10 0. 170 9. G-1/17-E 100.8 10. 170. Max Inlet Pressure bar 1-1/ inch BSPT / inch BSPT 1-1/8 inch Taper roller bearings.1 litres kg Performance specifications are guidelines only. Common Specifications: Max Temperature Metallic Heads: 11 C Consult factory for correct component selection for temperatures above 71 C Non-Metallic Heads: 0 C Shaft Rotation Bi-directional
G- Metallic Head: 70 bar Non-Metallic Head: 17 bar rpm l/min rpm I/min G--X 90 9 100 7 G--E 90 110 77 G--S 90 0 110 9 G--I 90 7 110 G--X 1 G--E 1 G--S 19 G--I Max Inlet Pressure 17 bar Metallic Heads: Non-Metallic Heads: 1-1/ inch BSPT 1 inch BSPT 1-1/8 inch Tapered roller. litres 7 kg 1 kg G- G- G- 8 bar rpm l/min rpm I/min G--X 90 1 100 18 G--E 90 108 110 11 G--X 7.7 G--E 8.8 Max Inlet Pressure 17 bar -1/ inch BSPT 1-1/ inch BSPT inch Tapered roller.7 litres 109 kg Performance specifications are guidelines only. Flexible pump designs to meet your customised needs... 1 1 High pressures up to 170 bar Vertical designs for machine tool and similar pump applications Complete line of valves, pump/motor adapters, couplings, and other accessories Welded flanges for petrochemical and other critical installations Wide selection of pump head, diaphragm and valve materials as well as optional mounting configurations Slurry duty designs for tough fluids that destroy most other pumps Accessories Accessory products simplify installation, increase performance and tailor pumps to harsh requirements: Pump/motor adapters, baseplates, couplings and guards Oil cooler and filter system Oil level monitor Oil reservoir sight bottles Specialty tools Hose connectors Modified and Customised Designs Pump component modification to handle a particular fluid, critical performance specification, extreme operating conditions Custom pump head or body castings Matching OEM paint specifications Private labeling
Hydra-Cell pumps for all your applications... Clean. Dirty. Hot. High pressure. Low pressure. Caustic. Thick. Gooey. Abrasive. Flammable. Perishable. Wettable Powder... Hydra-Cell pumps can handle a full spectrum of industrial and commercial fluids. Machine Tool Coolant 9 8 7 1 Flue Gas Emission Control Agricultural Applications Food Process/In-Plant Cleaning Parts Washing Lawn Care Paper Mill Applications 0 17.0 Spray Drying - Abrasives Reverse Osmosis Separation Car Wash Tote, Tank and Barrel Washing Oil Production and Refining Propellant Packaging 9 8 7 1 0
Hydra-Cell Worldwide Sales & Service Hydra-Cell pumps are sold and serviced worldwide by a comprehensive network of factory trained pump distributors. As specialists in pump technologies, these distributor organizations offer you a vital local resource for technical expertise, product training, sales and service. Hydra-Cell distributors are located in more than thirty countries worldwide. In North America specifically, over 100 Hydra-Cell distributor locations provide local availability for every major industrial marketplace. Contact our home office for the distributor location nearest you. Australia Austria Belgium Brazil Canada China Czechoslovakia Denmark Finland France Germany Greece Holland Hong Kong Iceland India Indonesia Israel Italy Japan Korea Malaysia Mexico New Zealand Norway Portugal Puerto Rico Singapore South Africa Spain Sweden Switzerland Taiwan Thailand Turkey United Kingdom United States Wanner Engineering, Inc. 10 Chestnut Avenue, Minneapolis, MN 0 USA (1) -81 FAX (1) -97 Toll Free FAX (USA only) (800) -81 Email: sales@wannereng.com Website: www.hydra-cell.com Document Fax Back System: (10) 7-00 Wanner International Ltd. Units 8 & 9, Fleet Business Park Sandy Lane Church Crookham, Hampshire GU 8BF, England Tel +() 01 8187 FAX Tel +() 01 9 Email: sales@wannerint.com Printed in USA /1/0 10k