FILTER, REGULATOR AND FILTER/REGULATOR stainless steel L compact /, high flow / - / Air Preparation Series FEATURES Stainless Steel, and intended for corrosive environment and suitable for use in potentially explosive atmosphere caused by gases, vapours, mists and / or dust according to new ATEX directive //EU. SAFETY CODE: II GD IIC T C (T), with 9 C ambient temperature II GD IIC T8 C (T), with C ambient temperature (ZONE -) Explosion group IIC CU-TR certified for potentially explosive atmospheres Functional Safety: IEC 8, SIL certified Comply with the European Essential Health and Safety Requirements (EN-) All internal metal parts made of / L stainless steel Built-in overpressure relieving function, non-relieving option available L Stainless Steel body, bonnet and bowl Internal springs made of INCONEL to suit sour gas environment complying to NACE MR / ISO () () Only available for High Flow as an option INCONEL is trademark of the Special Metals Corporation group of companies BENEFITS Precise tuning and regulation - using dual spring design () Improved regulation accuracy - with pitot tube feedback () Effective moisture removal - using fin diverters to create centrifugal action () Long lasting product labelling - laser etched marking on stainless steel bowl () () Only available for High Flow () Only available for Compact IN OUT CHARACTERISTICS Fluids Compliance to NACE for sour Gas environment Compact Compressed air, neutral gas, natural gas No High Flow Compressed air, neutral gas, natural gas & sour natural gas Yes (as an option) Ports / / & / Threads Pressure range (inlet) Regulating pressure (outlet) NPT G as an option - bar (Manual Drain), - bar (Auto Drain), - bar Regulation By hexagonal head screw with nut Hysteresis <, bar <, bar ing capacity µm & µm Operating temperature () - C to +9 C Low temperature option - C - C Condensate Drain Manual & Automatic () Operating temperature for Automatic Drain: + C to + C CONSTRUCTION Compact High Flow AISI L SS Body, bonnet & bowl Bowl capacity = cm Bowl capacity = cm ing element AISI SS Diaphragm LT FPM LT FPM / HNBR Elastomers FPM 8GB-/R
SERIES PRODUCT CODE A 8 AD Options Product series AD = Automatic Drain AN = Automatic Drain with /8 NPT connection D = Right-to-left flow sense Revision letter G = SS pressure gauge A = Initial release LT = Low Temperature () F/R/FR type 8 = SS (FR) 9 = (F) () A = (R) () MB = L SS Mounting Brackets () () A special low temperature SS pressure gauge will be delivered. () Not mounted onto the product Filtration/port size = High Flow / NPT µm or only Pressure relief / vent hole = High Flow / G µm or only = Non relief diaphragm type () = High Flow / NPT µm or only = Ø M thread = High Flow / G µm or only = Ø /8 NPT = High Flow / NPT µm = High Flow / G µm = High Flow / NPT µm Certifications & approvals 8 = High Flow / G µm = ATEX / 9 = Compact / NPT µm = ATEX / + CUTR A = Compact / G µm = ATEX / + NACE () B = Compact / NPT µm = ATEX / + NACE + CUTR () C = Compact / G µm () Not available for Compact version () Bonnet with Ø /8 NPT thread NOTE: Please refer to our online configurator for option combinations availability ORDERING EXAMPLE. High-Flow stainless steel (/" NPT, µm filtration) with Auto Drain, pressure gauge & mounting bracket Product Code: A8ADGMB. Compact low temperature stainless steel (/" NPT, µm filtration)with low temperature pressure gauge & mounting bracket Product Code: A89GLTMB MAXIMUM FLOW VALUES Construction Type Maximum Flow Values Following ISO Standards 8, 8 and 9 Compact High Flow / / / μm μm μm μm μm μm Inlet pressure =. bar and P = bar - - 8 8 Inlet pressure = bar, setpoint =. bar and P = bar - - 8 Inlet pressure = bar, setpoint =. bar and P = bar 8 8 9 8GB-/R
SERIES AUTO DRAIN PRESSURE GAUGE MOUNTING BRACKET HIGH FLOW & HIGH FLOW Maximum inlet pressure Operating pressure. - bar Diameter Ø mm Ø mm Operating temperature C to + C Gauge port size /" NPT /8" NPT Metal parts L SS Material Stainless Steel Elastomers FPM Protection IP; Safety glass; Fixed crimped case to avoid accidental dismounting Float material Thermoplastic polymer Part number C C9 INSTALLATION Adaptor ( SS) for /8 NPT conversion AN as option HIGH FLOW bar Pressure - bar - bar Material L Stainless Steel Part number Low Temp. option C Installation/Maintenance instructions are included with each / Air flow direction indicated by IN/OUT as well as inlet & outlet indicators Pipe connection has standard thread according to NPT (ANSI..) C98 Part number C8 C8 DIMENSIONS(mm), WEIGHT(kg) FILTER F *-MOUNT. HOLES REGULATOR THREADED PRESSURE-RELIEF CONNECTION (NON-RELIEF OPTION AVAILABLE) D G C REFER TABLE: PORT SIZE ØD C F REFER TABLE: PORT SIZE ØD *-MOUNT. HOLES / NPT PRESSURE GAUGE CONNECTION G H E J AUTO DRAIN SUFFIX-AD MANUAL DRAIN AUTO DRAIN WITH ADAPTER (/8 NPT) SUFFIX-AN A A B FILTER REGULATOR B MOUNTING BRACKET * * Note: Mounting hole size M for Hi-Flow and mounting hole size M for Compact 8GB-/R
SERIES DIMENSIONS(mm), WEIGHT(kg) Type ØD NPT Weight (kg) A B C D E F G H J SPARE PARTS KITS Type ing Capacity Spare Parts Kit Number Standard Spare Parts Kit Number Low Temp /, /,,,, Ø μm C9 μm C HIGH FLOW /, /, - -, Ø HIGH FLOW - C C99 /,98 /, Ø μm C C99 μm C C99 /, 9 Ø, 8 μm C9 C99 μm C9 C99 Option Weight (kg) Auto Drain, Adapter for Auto Drain, Pressure Gauge, Mounting Bracket,9 PRESSURE DROP vs. AIR FLOW CURVES St. steel / NPT Ref. : A9 Filtration µm with P inlet -, - 8 - bar St. steel / NPT Ref. : A9 Filtration µm with P inlet -, - 8 - bar 9 8 Pi=bar Pi=.bar 8 Pi=bar dm /s Pi=bar 8 8 Pi=.bar Pi=bar dm /s St. steel / NPT Ref. : A9 Filtration µm with P inlet -, - 8 - bar St. steel / NPT Ref. : A9 Filtration µm with P inlet -, - 8 - bar Pi=bar Pi=.bar Pi=bar...... Pi=bar Pi=.bar Pi=bar 8 dm /s 8 dm /s 8GB-/R
SERIES PRESSURE DROP vs. AIR FLOW CURVES St. steel / NPT Ref. : AA P inlet b - setpoint -, - 8 bar St. steel / NPT Ref. : AA P inlet b - setpoint -, - 8 bar 9 8 bar 8 bar. bar 8 8 9 dm /s 9 8 bar 8 bar. bar 8 dm /s St. steel / NPT Ref : A8 Filtration μm with P inlet b - setpoint, - -, bar bar. bar. bar St. steel / NPT Ref. : A8 Filtration μm with P inlet b - setpoint, - -, bar. bar. bar bar 8 9 dm /s dm /s St. steel / NPT Ref : A8 Filtration μm with P inlet b - setpoint, - -, bar. bar. bar bar 9 8 9 dm /s St. steel / NPT Ref. : A8 Filtration μm with P inlet b - setpoint, - -, bar 8. bar bar. bar dm /s 8GB-/R
SERIES PRESSURE DROP vs. AIR FLOW CURVES St. steel / NPT Ref : A8B Filtration μm with P inlet b - setpoint. - -. bar. bar bar. bar St. steel / NPT Ref. : A89 Filtration μm with P inlet b - setpoint. - -. bar. bar 8 bar. bar dm /s dm /s PIC---GB -- Availability, design and specifications are subject to change without notice. All rights reserved. 8GB-/R