No: En Revision Parts List. MINEX O-RING KIT BASIC REPAIR KIT E_8101_171_expl_view

No: 89850 En Revision 6.0 0 0 Parts List MINEX 80.7 www.grindex.com O-RING KIT BASIC REPAIR KIT 0008E_80_7_expl_view

Parts List MINEX 80.7 Overview Table of Contents This publication contains the following topics: Topic Introduction... 4 Practical Information... 5 Data Plate Interpretation... 6 Order parts... 7 Spare Parts... 8 Parts List, MINEX 80.7 3

Introduction Purpose The purpose of this manual is to give the reader information about available spare parts and accessories for the product. Recipient The manual is principally intended for Grindex customers service personnel sales personnel Contact For more information contact your Grindex representative visit http://www.grindex.com/ Reference More information about the product is available in the following documents: Installation, Operation and Maintenance Grindex accessories list 4 Parts List, MINEX 80.7

Practical Information Overview Table of Contents This chapter contains the following topics: Topic Data Plate Interpretation... 6 Data Plate... 6 Order parts... 7 Parts List, MINEX 80.7 5

Data Plate Interpretation Introduction The Grindex product is always provided with data plates: The general data plate is used on all products. The approval plate is added to all explosion proof products. Data Plate The product may only be operated within the parameters stated on the data plate. Illustration This is an illustration of a general data plate. Field description This table shows the fields on the general data plate, and which information each field contains. Field Description Field Description Pump type number Degree of protection Frequency Maximum capacity 3 Phases, type of current 3 Rated current 4 Rated shaft power 4 Direction of the start reaction 5 Thermal class 5 Direction of the impeller rotation 6 Locked rotor code-letter 6 Maximum head 7 Country of origin 7 Serial number 8 Maximum power consumption 8 Rated voltage 9 Product weight 9 Pump model 0 Maximum submersion depth - - 6 Parts List, MINEX 80.7

Order parts Order When ordering spare parts, state product number and serial number of the product, spare part number and quantity. Requirements Genuine Grindex parts must always be used for repairs if the product is to fulfill requirements and obtain official approval. Specially Approved Products Spare parts marked with (EX) after the part number are subject to dimensional accuracy inspection. Parts List, MINEX 80.7 7

Spare Parts NOTE! Parts with position numbers that end with.9xx are NOT included in the unit and must be ordered separately. Pos. No Part. No Denomination 3 50 833 00 Handle compl. 4 50 0 33 Hex.socket hd screw M8X0-A4-80 6 50 0 37 Hexagon nut M8-A4-70 3 7 50 0 38 Plain washer 8-A4-70 0 40 05 O-ring 79,X5,7-NBR 40 689 Stud M8X45-A-70 50 836 00 Air release valve 4 50 888 00 Plate-blank Use 50 907 00 (EU), 50 907 0 (US) as spare part. 5 40 000 Drive screw 4X5-A-70 4 6 50 0 Hex.socket hd screw M8X0-A-70 7 40 00 Hexagon head screw M6X5-A4-70 8 40 03 Plain washer 6-A4-70 9 50 93 00 Entrance flange (0)-0MM 9 50 93 0 Entrance flange ()-6MM 0 50 96 00 Cable clip (0)- MM 0 50 96 0 Cable clip ()-4 MM 0 50 96 0 Cable clip (4)-6 MM 0 50 96 04 Cable clip (8)-0 MM 0 50 96 05 Cable clip (0)- MM 0 50 96 06 Cable clip ()-4 MM 0 50 96 07 Cable clip (4)-6 MM 40 77 Seal sleeve (0)- MM 40 78 Seal sleeve ()-4 MM 40 79 Seal sleeve (4)-6 MM 40 730 Seal sleeve (6)-8 MM 40 73 Seal sleeve (8)-0 MM 40 73 Seal sleeve (0)- MM 40 733 Seal sleeve ()-4 MM 40 734 Seal sleeve (4)-6 MM 50 7 00 Plain washer (4)-6 MM 50 7 04 Plain washer (0)- MM 3 40 05 O-ring 79,X5,7-NBR 7 4 8 Parts List, MINEX 80.7

4 40 00 Hex.socket hd screw M8X-A-70 5 50 83 00 Cover 6 5 53 00 Entrance cover unit 6. 5 399 00 Gland screw 6. 5 53 0 Main cover 6.3 5 400 00 Plate 6.4 5 40 00 Plug 7 50 00 04 Hex.socket hd screw M6X0-A4-70 9 50 00 04 Hex.socket hd screw M6X0-A4-70 30 40 03 Cable lug INSUL.UL/CSA.04-.6 MM 30 40 77 Cable lug INSUL.UL/CSA.6-6.64MM 3 50 00 04 Hex.socket hd screw M6X0-A4-70 3 40 03 Plain washer 6-A4-70 5 33 50 95 0 Gasket 34 40 008 Hex.socket hd screw M4X6-A-70 35 40 390 Thermal detectors 36 5 50 00 Cover 37 40 06 O-ring 09.X5.7 NBR 38 50 037 0 O-ring 9.5X3 NBR 39 5 47 0 Stator housing 50Hz: -phase P=,7kW. 60Hz: -phase P=,8kW. 39 5 5 00 Stator housing 50Hz: -phase P=,kW, 3-phase P=,6kW. 60Hz: -phase P=,3kW, 3-phase P=,8kW. 40 40 087 O-ring 74.3X5.7 NBR 4 50 834 00 Outer casing 50Hz: -phase P=,7kW. 60Hz: -phase P=,8kW. 4 5 54 00 Outer casing 50Hz: -phase P=,kW, 3-phase P=,6kW. 60Hz: -phase P=,3kW, 3-phase P=,8kW. 4 40 0 O-ring 75X3 NBR 43 50 037 63 O-ring 36,X3,0 FPM 44 50 87 03 Ball bearing 630-Z/C3WT X37X 45 50 93 00 Stator 3-0-b 50Hz: -phase P=,7kW 0V-40V. 7 3 5 Parts List, MINEX 80.7 9

45 50 93 0 Stator 3-0-b 60Hz: -phase P=,8kW 30V. 45 50 933 00 Stator 3-06-b 50Hz: 3-phase P=,6kW 380V-45V Y, 0V-30V D. 45 50 933 0 Stator 3-06-b 50Hz: 3-phase P=,6kW 500V-550V Y. 60Hz: 3-phase P=,8kW 575V-600V Y. 45 50 933 0 Stator 3-06-b 60Hz: 3-phase P=,8kW 460V-480V YSER, 30V Y//. 45 50 933 03 Stator 3-06-b 60Hz: 3-phase P=,8kW 380V Y, 0V D. 45 50 933 07 Stator 3-06-b 60Hz: 3-phase P=,8kW 30V D//, 380V Y//, 460V DSER. 45 50 933 08 Stator 3-06-b 50Hz: 3-phase 400V Y. 60Hz: 3-phase 460V Y. 3-lead stator. 45 50 933 09 Stator 3-06-b 60Hz: 3-phase 575V-600V Y. 45 50 934 00 Stator 3-06-b 60Hz: -phase P=,3kW 0V-40V. 45 50 934 0 Stator 3-06-b 60Hz: -phase P=,3kW 5V. 45 50 934 0 Stator 3-06-b 50Hz: -phase P=,kW 0V-40V. 45 50 934 03 Stator 3-06-b 50Hz: -phase P=,kW 0V. 46 50 94 0 Shaft unit 50Hz: -phase P=,7kW. 60Hz: -phase P=,8kW. 46 50 94 04 Shaft unit 50Hz: -phase P=,kW, 3-phase P=,6kW. 60Hz: -phase P=,3kW, 3-phase P=,8kW. 47 50 988 06 Bearing housing 48 50 983 00 Gasket NBR 3 49 50 87 04 Ball bearing 6304-Z/C3WT 0X5X5 50 50 037 0 O-ring 9.5X3 NBR 5 50 037 04 O-ring 09.5X3 NBR 5 50 037 0 O-ring 9.5X3 NBR 53 33 064 O-ring 9.X3 NBR 3 54 33 063 Inspection screw 3 55 50 989 00 Intermediate piece 56 40 03 Plain washer 6-A4-70 3 57 50 00 04 Hex.socket hd screw M6X0-A4-70 58 50 90 3 Mechanical seal 59 40 083 O-ring 57.5X3.0 FPM 7 3 0 Parts List, MINEX 80.7

60 40 040 Pressure equalizer 6 40 07 O-ring 4,5X3,0-NBR 6 50 98 00 Seal housing cov.coa 63 50 0 38 Plain washer 8-A4-70 3 64 40 006 Hexagon head screw M8X60-A4-80 65 50 930 00 Clamping sleeve 66 50 93 00 Adjustment screw 67 50 94 00 Impeller 50Hz: -phase P=,7kW 30V, 3-phase P=,6kW. 67 50 94 0 Impeller 50Hz: -phase P=,kW 0V & 30V. 60Hz: 3-phase P=,8kW. 67 50 94 0 Impeller 60Hz: -phase P=,3kW 5V. 67 50 94 03 Impeller 60Hz: -phase P=,8kW 30V. 68 40 04 Plain washer A-70HV M8 69 40 006 Hexagon head screw M8X60-A4-80 70 50 943 00 Diffuser part 70 50 943 0 Diffuser part Prepared for zinc anode. 7 50 0 38 Plain washer 8-A4-70 3 7 40 006 Hexagon head screw M8X60-A4-80 73 50 99 00 Strainer compl. 74 50 0 38 Plain washer 8-A4-70 3 75 50 0 37 Hexagon nut M8-A4-70 76 40 03 Plain washer 6-A4-70 77 40 503 Hex.socket hd screw M6X-A-70 79 50 037 58 O-ring 74,5X3,0 NBR 80 50 78 0 Retaining ring SGA 0 300 5 63 00 Connection plate 30 5 64 00 Terminal plate unit 30 50 89 39 STARTER UNIT Contactor unit, 50Hz: 380V - 45V Y. 30. 40 008 Hex.socket hd screw M4X6-A-70 30. 40 0 Lock nut 4 30.3 40 09 Contactor 30.4 50 900 6 Single-core cable 30.5 50 883 00 Mounting plate 7 3 3 4 Parts List, MINEX 80.7

30.6 50 509 00 Cable set 30.7 5 5 05 Motor protector SMART 30.946 5 639 00 Cable set Ordered separately. 30.96 40 034 Closed end splice 3-6(AWG -0) L=8 Ordered separately. 30.983 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 3 50 89 33 STARTER UNIT Contactor unit, 50Hz: 500V Y. 3. 40 008 Hex.socket hd screw M4X6-A-70 3. 40 0 Lock nut 4 3.3 40 0 Contactor 3.4 50 900 6 Single-core cable 3.5 50 883 00 Mounting plate 3.6 50 509 00 Cable set 3.7 5 5 05 Motor protector SMART 3.946 5 639 00 Cable set Ordered separately. 3.96 40 034 Closed end splice 3-6(AWG -0) L=8 Ordered separately. 3.983 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 33 50 89 38 STARTER UNIT Contactor unit, 60Hz: 30V Y//. 33. 40 008 Hex.socket hd screw M4X6-A-70 33. 40 0 Lock nut 4 33.3 40 08 Contactor 33.4 50 900 6 Single-core cable 33.5 50 883 00 Mounting plate 33.6 50 509 00 Cable set 33.7 5 5 08 Motor protector SMART 33.946 5 639 00 Cable set Ordered separately. 33.96 40 034 Closed end splice 3-6(AWG -0) L=8 Ordered separately. 33.983 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 335 50 89 35 STARTER UNIT Contactor unit, 60Hz: 380V Y. 335. 40 008 Hex.socket hd screw M4X6-A-70 335. 40 0 Lock nut 335.3 40 09 Contactor 335.4 50 900 6 Single-core cable 335.5 50 883 00 Mounting plate 335.6 50 509 00 Cable set 335.7 5 5 06 Motor protector SMART 335.946 5 639 00 Cable set Ordered separately. 7 4 4 Parts List, MINEX 80.7

335.96 40 034 Closed end splice 3-6(AWG -0) L=8 Ordered separately. 335.983 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 338 50 89 37 STARTER UNIT Contactor unit, 60Hz: 575V - 600V Y. 338. 40 008 Hex.socket hd screw M4X6-A-70 338. 40 0 Lock nut 4 338.5 50 900 6 Single-core cable 338.6 50 883 00 Mounting plate 338.7 50 509 00 Cable set 338.8 5 5 06 Motor protector SMART 338.946 5 639 00 Cable set Ordered separately. 338.96 40 034 Closed end splice 3-6(AWG -0) L=8 Ordered separately. 338.983 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 339 50 89 36 STARTER UNIT Contactor unit, 60Hz: 460V - 480V YSER. 339. 40 008 Hex.socket hd screw M4X6-A-70 339. 40 0 Lock nut 4 339.3 40 63 Contactor 339.4 50 900 6 Single-core cable 339.5 50 883 00 Mounting plate 339.6 50 509 00 Cable set 339.7 5 5 06 Motor protector SMART 339.946 5 639 00 Cable set Ordered separately. 339.96 40 034 Closed end splice 3-6(AWG -0) L=8 Ordered separately. 4 339.983 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 343 50 89 46 STARTER UNIT Contactor unit, 50Hz: 0V - 30V D. 343. 40 008 Hex.socket hd screw M4X6-A-70 343. 40 0 Lock nut 4 343.3 40 08 Contactor 343.4 50 900 6 Single-core cable 343.5 50 883 00 Mounting plate 343.6 50 509 00 Cable set 343.7 5 5 07 Motor protector SMART 343.946 5 639 00 Cable set Ordered separately. 343.983 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 7 4 4 4 Parts List, MINEX 80.7 3

344 50 89 38 STARTER UNIT Contactor unit, 60Hz: 0V - 30V D. 344. 40 008 Hex.socket hd screw M4X6-A-70 344. 40 0 Lock nut 4 344.3 40 08 Contactor 344.4 50 900 6 Single-core cable 344.5 50 883 00 Mounting plate 344.6 50 509 00 Cable set 344.7 5 5 08 Motor protector SMART 344.946 5 639 00 Cable set Ordered separately. 344.983 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 350 50 89 46 STARTER UNIT Contactor unit, 50Hz: 0V - 30V D, for float switch. 350. 40 008 Hex.socket hd screw M4X6-A-70 350. 40 0 Lock nut 4 350.3 40 08 Contactor 350.4 50 900 6 Single-core cable 350.5 50 883 00 Mounting plate 350.6 50 509 00 Cable set 350.7 5 5 07 Motor protector SMART 350.946 5 639 00 Cable set Ordered separately. 350.96 40 034 Closed end splice 3-6(AWG -0) L=8 Ordered separately. 350.968 40 077 Cable clamp Ordered separately. 350.976 5 78 00 Bending protection Ordered separately. 350.98 40 759 Flat pin sleeve.0-.6mm Ordered separately. 350.995 40 370 Plain washer Ordered separately. 35 50 89 39 STARTER UNIT Contactor unit, 50Hz: 400V Y, for float switch. 35. 40 008 Hex.socket hd screw M4X6-A-70 35. 40 0 Lock nut 4 35.3 40 09 Contactor 35.4 50 900 6 Single-core cable 35.5 50 883 00 Mounting plate 35.6 50 509 00 Cable set 35.7 5 5 05 Motor protector SMART 35.946 5 639 00 Cable set Ordered separately. 35.96 40 034 Closed end splice 3-6(AWG -0) L=8 Ordered separately. 7 4 4 4 4 Parts List, MINEX 80.7

35.968 40 077 Cable clamp Ordered separately. 35.976 5 78 00 Bending protection Ordered separately. 35.98 40 759 Flat pin sleeve.0-.6mm Ordered separately. 35.995 40 370 Plain washer Ordered separately. 37 50 89 3 STARTER UNIT Capacitor unit, 50Hz: 0V, for float switch. P=,kW. 37. 40 008 Hex.socket hd screw M4X6-A-70 37.3 40 0 Lock nut 37.4 50 0 36 Lock nut M8-A4-70 37.5 40 37 Capacitor 30MF 0/75V 37.6 40 38 Capacitor 80 MFD 75V 37.7 50 883 00 Mounting plate 37.8 50 906 03 Start relay SNT 37.9 5 004 00 Cable set 37.949 5 640 00 Cable set Ordered separately. 37.96 40 034 Closed end splice 3-6(AWG -0) L=8 Ordered separately. 37.968 40 077 Cable clamp Ordered separately. 37.983 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 37 50 89 5 STARTER UNIT Capacitor unit, 50Hz: 0V - 40V, for float switch. P=,7kW. 37. 40 008 Hex.socket hd screw M4X6-A-70 37.3 40 0 Lock nut 37.4 50 0 36 Lock nut M8-A4-70 37.5 40 089 Capacitor 00MF 360/450 V 37.6 40 40 Capacitor 35 MF 40V 37.7 50 883 00 Mounting plate 37.8 50 906 0 Start relay SNT 37.9 5 004 00 Cable set 37.949 5 640 00 Cable set Ordered separately. 37.96 40 034 Closed end splice 3-6(AWG -0) L=8 Ordered separately. 37.968 40 077 Cable clamp Ordered separately. 37.983 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 373 50 89 5 STARTER UNIT Capacitor unit, 50Hz: 0V - 40V. P=,7kW. 373. 40 008 Hex.socket hd screw M4X6-A-70 373.3 40 0 Lock nut 373.4 50 0 36 Lock nut M8-A4-70 7 Parts List, MINEX 80.7 5

373.5 40 089 Capacitor 00MF 360/450 V 373.6 40 40 Capacitor 35 MF 40V 373.7 50 883 00 Mounting plate 373.8 50 906 0 Start relay SNT 373.9 5 004 00 Cable set 373.949 5 640 00 Cable set Ordered separately. 373.983 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 379 50 89 3 STARTER UNIT Capacitor unit, 50Hz: 0V. P=,kW. 379. 40 008 Hex.socket hd screw M4X6-A-70 379.3 40 0 Lock nut 379.4 50 0 36 Lock nut M8-A4-70 379.5 40 37 Capacitor 30MF 0/75V 379.6 40 38 Capacitor 80 MFD 75V 379.7 50 883 00 Mounting plate 379.8 50 906 03 Start relay SNT 379.9 5 004 00 Cable set 379.949 5 640 00 Cable set Ordered separately. 379.983 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 38 50 89 4 STARTER UNIT Capacitor unit, 50Hz: 0V - 40V. 60Hz: 0V - 40V. P=,kW. 38. 40 008 Hex.socket hd screw M4X6-A-70 38.3 40 0 Lock nut 38.4 50 0 36 Lock nut M8-A4-70 38.5 40 377 Capacitor 80MF 360/450V 38.6 40 376 Capacitor 0MF 400V 38.7 50 883 00 Mounting plate 38.8 50 906 0 Start relay SNT 38.9 5 004 00 Cable set 38.949 5 640 00 Cable set Ordered separately. 38.983 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 38 50 89 6 STARTER UNIT Capacitor unit, 60Hz: 0V - 40V, for float switch. 38. 40 008 Hex.socket hd screw M4X6-A-70 38.3 40 0 Lock nut 38.4 50 0 36 Lock nut M8-A4-70 38.5 40 089 Capacitor 00MF 360/450 V 38.6 40 4 Capacitor 30 MF 40V 7 6 Parts List, MINEX 80.7

38.7 50 883 00 Mounting plate 38.8 50 906 0 Start relay SNT 38.9 5 004 00 Cable set 38.949 5 640 00 Cable set Ordered separately. 38.96 40 034 Closed end splice 3-6(AWG -0) L=8 Ordered separately. 3 38.968 40 077 Cable clamp Ordered separately. 38.983 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 383 50 89 4 STARTER UNIT Capacitor unit, 50Hz: 0V - 40V, for float switch. P=,kW. 383. 40 008 Hex.socket hd screw M4X6-A-70 383.3 40 0 Lock nut 383.4 50 0 36 Lock nut M8-A4-70 383.5 40 377 Capacitor 80MF 360/450V 383.6 40 376 Capacitor 0MF 400V 383.7 50 883 00 Mounting plate 383.8 50 906 0 Start relay SNT 383.9 5 004 00 Cable set 383.949 5 640 00 Cable set Ordered separately. 383.96 40 034 Closed end splice 3-6(AWG -0) L=8 Ordered separately. 383.968 40 077 Cable clamp Ordered separately. 383.983 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 4 386 50 89 3 STARTER UNIT Capacitor unit, 60Hz: 5V. P=,3kW. 386. 40 008 Hex.socket hd screw M4X6-A-70 386.3 40 0 Lock nut 386.4 50 0 36 Lock nut M8-A4-70 386.5 40 37 Capacitor 30MF 0/75V 386.6 40 38 Capacitor 80 MFD 75V 386.7 50 883 00 Mounting plate 386.8 50 906 03 Start relay SNT 386.9 5 004 00 Cable set 386.949 5 640 00 Cable set Ordered separately. 386.96 40 034 Closed end splice 3-6(AWG -0) L=8 Ordered separately. 386.983 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 387 50 89 3 STARTER UNIT Capacitor unit, 60Hz: 5V, for float switch. P=,3kW. 7 Parts List, MINEX 80.7 7

387. 40 008 Hex.socket hd screw M4X6-A-70 387.3 40 0 Lock nut 387.4 50 0 36 Lock nut M8-A4-70 387.5 40 37 Capacitor 30MF 0/75V 387.6 40 38 Capacitor 80 MFD 75V 387.7 50 883 00 Mounting plate 387.8 50 906 03 Start relay SNT 387.9 5 004 00 Cable set 387.949 5 640 00 Cable set Ordered separately. 387.968 40 077 Cable clamp Ordered separately. 387.983 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 388 50 89 4 STARTER UNIT Capacitor unit, 60Hz: 0V -40V,forfloat switch. P=,3kW. 388. 40 008 Hex.socket hd screw M4X6-A-70 388.3 40 0 Lock nut 388.4 50 0 36 Lock nut M8-A4-70 388.5 40 377 Capacitor 80MF 360/450V 388.6 40 376 Capacitor 0MF 400V 388.7 50 883 00 Mounting plate 388.8 50 906 0 Start relay SNT 388.9 5 004 00 Cable set 388.949 5 640 00 Cable set Ordered separately. 388.96 40 034 Closed end splice 3-6(AWG -0) L=8 Ordered separately. 388.968 40 077 Cable clamp Ordered separately. 388.983 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 389 50 89 6 STARTER UNIT Capacitor unit, 60Hz: 0V - 30V. P=,6kW. 389. 40 008 Hex.socket hd screw M4X6-A-70 389.3 40 0 Lock nut 389.4 50 0 36 Lock nut M8-A4-70 389.5 40 089 Capacitor 00MF 360/450 V 389.6 40 4 Capacitor 30 MF 40V 389.7 50 883 00 Mounting plate 389.8 50 906 0 Start relay SNT 389.9 5 004 00 Cable set 389.949 5 640 00 Cable set Ordered separately. 389.983 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 7 8 Parts List, MINEX 80.7

39 50 89 47 STARTER UNIT Contactor unit, 50Hz: 380V - 45V Y, for float switch. 39. 40 008 Hex.socket hd screw M4X6-A-70 39. 40 0 Lock nut 6 39.3 40 77 Transformer 4V 39.4 40 77 Contactor 39.5 50 883 00 Mounting plate 39.6 50 509 00 Cable set 39.7 5 5 05 Motor protector SMART 39.946 5 639 00 Cable set Ordered separately. 39.96 40 034 Closed end splice 3-6(AWG -0) L=8 Ordered separately. 39.968 40 077 Cable clamp Ordered separately. 39.976 5 78 00 Bending protection Ordered separately. 39.98 40 759 Flat pin sleeve.0-.6mm Ordered separately. 39.995 40 370 Plain washer Ordered separately. 393 50 89 49 STARTER UNIT Contactor unit, 50Hz: 500V - 550V Y, for float switch. 393. 40 008 Hex.socket hd screw M4X6-A-70 393. 40 0 Lock nut 6 393.3 40 773 Transformer 4V 393.4 40 77 Contactor 393.5 50 883 00 Mounting plate 393.6 50 509 00 Cable set 393.7 5 5 05 Motor protector SMART 393.946 5 639 00 Cable set Ordered separately. 393.96 40 034 Closed end splice 3-6(AWG -0) L=8 Ordered separately. 393.968 40 077 Cable clamp Ordered separately. 393.976 5 78 00 Bending protection Ordered separately. 393.98 40 759 Flat pin sleeve.0-.6mm Ordered separately. 393.995 40 370 Plain washer Ordered separately. 395 50 89 48 STARTER UNIT Contactor unit, 60Hz: 460V - 480V YSER, for float switch. 395. 40 008 Hex.socket hd screw M4X6-A-70 395. 40 0 Lock nut 6 395.3 40 77 Transformer 4V 395.4 40 77 Contactor 395.5 50 883 00 Mounting plate 7 6 6 6 Parts List, MINEX 80.7 9

395.6 50 509 00 Cable set 395.7 5 5 06 Motor protector SMART 395.946 5 639 00 Cable set Ordered separately. 395.96 40 034 Closed end splice 3-6(AWG -0) L=8 Ordered separately. 395.968 40 077 Cable clamp Ordered separately. 395.976 5 78 00 Bending protection Ordered separately. 395.98 40 759 Flat pin sleeve.0-.6mm Ordered separately. 395.995 40 370 Plain washer Ordered separately. 396 50 89 50 STARTER UNIT Contactor unit, 60Hz: 575V - 600V Y, for float switch. 396. 40 008 Hex.socket hd screw M4X6-A-70 396. 40 0 Lock nut 6 396.3 40 773 Transformer 4V 396.4 40 77 Contactor 396.5 50 883 00 Mounting plate 396.6 50 509 00 Cable set 396.7 5 5 06 Motor protector SMART 396.946 5 639 00 Cable set Ordered separately. 396.96 40 034 Closed end splice 3-6(AWG -0) L=8 Ordered separately. 396.968 40 077 Cable clamp Ordered separately. 396.976 5 78 00 Bending protection Ordered separately. 396.98 40 759 Flat pin sleeve.0-.6mm Ordered separately. 396.995 40 370 Plain washer Ordered separately. 500 40 039 Cablewithplug3G.5MM OD=0-MM L=0 500.940 40 056 Insulating hose (0-6MM) Ordered separately. * 500.983 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 50 3 04 Motor cable 3G.5 MM OD=0- MM 50.940 40 056 Insulating hose (0-6MM) Ordered separately. * 50.983 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 50 3 040 Motor cable 4G.5 MM OD=0.5-.5 MM 50.940 40 056 Insulating hose (0-6MM) Ordered separately. * 503 40 06 Motor cable 4G.5+X.5 OD=5.5-6.5 503.940 40 056 Insulating hose (0-6MM) Ordered separately. * 504 3 039 Motor cable 4G.5 MM OD=.5-3.5 MM 504.940 40 056 Insulating hose (0-6MM) Ordered separately. * 7 6 * * * * 0 Parts List, MINEX 80.7

59 40 40 Motor cable 3G.5 MM OD=- MM 59.940 40 056 Insulating hose (0-6MM) Ordered separately. * 59.98 40 759 Flat pin sleeve.0-.6mm Ordered separately. 5 40 064 Motor cable 4AWG/3 OD=3.-4. MM 5.940 40 056 Insulating hose (0-6MM) Ordered separately. * 5.98 40 759 Flat pin sleeve.0-.6mm Ordered separately. 53 40 065 Motor cable 4AWG/4 OD=4.-5. MM 53.940 40 056 Insulating hose (0-6MM) Ordered separately. * 53 40 066 Motor cable 4AWG/7 OD=8-0 MM 53.94 3 354 Insulating hose (8-MM) Ordered separately. * 538 40 058 Motor cable SCREEN 3X.5MM 3.5-4.9 538.940 40 056 Insulating hose (0-6MM) Ordered separately. * 538.950 40 055 Shrink hose Ordered separately. * 54 40 06 Motor cable SCREEN 3X.5+3X.5 9-0 54.94 3 354 Insulating hose (8-MM) Ordered separately. * 6 5 49 00 Discharge connection DN 50 HOSE " 6 5 49 0 Discharge connection DN 50 ISO-G A OUTER 63 5 49 0 Discharge connection DN 50 ISO-G A OUTER 63.970 40 07 Coupling part DN 5 INNER GB STORZ 68 5 49 0 Discharge connection DN 50 "-.5 NPT OUTER Ordered separately. 800 5 66 00 O-ring kit Contains all position numbered O-rings. 80 5 077 00 Anode KIT 900 5 8 00 Basic repair kit 900. 50 87 03 Ball bearing 630-Z/C3WT X37X 900. 50 87 04 Ball bearing 6304-Z/C3WT 0X5X5 900.3 40 040 Pressure equalizer 900.4 50 90 3 Mechanical seal 900.5 5 66 00 O-ring kit Contains all position numbered O-rings. 90 40 035 Plug contact 50V PH 0A T SEV0 7 * * * * * * Parts List, MINEX 80.7

90 40 036 Plug contact 00-30V/6A P+GND K9000 90 40 037 Plug contact 5V/5A,60HZ 90 40 038 Plug contact 50V PH 5A NEMA 6-5 90 40 04 Plug contact 30V PH 6A CEE 3P 90 40 684 Plug contact CEE/6A/4- POL/380-45V 90 50 00 00 Plug contact 380-45 V 3 PH 6A CEE 5P 90 50 0 00 Phase shifter 0-575V 0-6A 903 50 653 00 Low-suction cuff 90 5 55 00 Float switch kit MAX 400V 90 5 55 0 FloatswitchkitCE,MAX50V, 4V 90 5 55 0 Float switch kit CSA, MAX 50V, 4V * Quantity per meter 7 Parts List, MINEX 80.7

Grindex AB Box 705 SE-74 07 Sundbyberg Sweden Tel +46 8 606 66 00 Fax +46 8 745 53 8 marketing@grindex.com Grindex AB. The original instruction is in English. All non-english instructions are translations of the original instruction.