DMV Series W For Combustible Dusts

L DMV Series 50-250W For Combustible Dusts Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups E, F, G; Cl. III & Simultaneous Presence (175W max) Marine & Wet Locations, R, 4, 4X; IP66 L Applications: DMV series Champ luminaires are used: In applications made hazardous by the presence of combustible dusts In areas in which ignitible concentrations of flammable gases or vapors will be present only due to abnormal, unusual, or accidental conditions In marine applications where water spray and corrosive atmospheres are considerations In areas where combustible dusts and flammable vapors are present simultaneously In elevated ambient temperatures often found in industrial applications In installations where moisture, dirt, dust, vibration, corrosion and rough usage are problems Wherever the damaging effects of wind, snow, sleet, or hot sun are found In grain handling, storage and processing plants, coal preparation plants, coal conveying areas, food processing plants, manufacturing plants, refineries, chemical, petrochemical, and other industrial process facilities, waste or sewage treatment facilities, offshore, dockside, and harbor installations, and other heavy industrial applications Features: Cast copper-free aluminum construction (less than 0.4 of 1% copper) and epoxy powder finish provide excellent resistance to corrosion. Seven mounting arrangements to suit any lighting layout pendant, flexible pendant, ceiling, wall bracket, angle stanchion, straight stanchion, and quad-mount. Wide range of light sources and wattages to meet specifiers' needs: 50, 70, 100, 150 watt high pressure sodium (HPS); 70, 100, 175, 250 watt metal halide. Hinged ballast housing for ease of installation and maintenance. All luminaires designed to perform in a 40 C ambient temperature. Selected luminaires are suitable for ambient temperatures up to 65 C. Superior gasketing seals between the mounting module, housing, and optical assembly for optimum performance in wet and corrosive environments. Hubs with an integral conduit stop and bushing to help prevent damage to field wiring during installation. Low ambient capability to ( 40 C.) Dome and 0 angle reflectors made of bright white Krydon material provide superior reflectivity, with twist-on feature requiring no tools or additional hardware. Will not chip, peel, dent, rust, or corrode. Mogul base porcelain lamp socket. Stainless steel open bottom guard permits direct access to the globe for easy relamping. Grounding wire for safety. Ballasts available in voltages of 120, 208, 240, 277, 47, 480, 600 and multi-tap.* Certifications and Compliances: NEC/CEC: Class I, Division 2, Groups A, B, C, D 175W max Class II, Class III & Simultaneous Presence (Class I, Division 2 and Class II) Class I, Zone 2 IEC: Zone 2 Ex nr IIC UL Standards: 844 Hazardous (Classified) Locations 1598 Luminaires 1598A Marine Locations CSA Standards: C22.2 No. 17 IEC Standards: 60079-15 Standard Materials: Ballast housings and mountings copperfree aluminum (less than 0.4 of 1% copper) Guard and exterior hardware stainless steel Reflectors (dome and angle) Krydon fiberglass-reinforced polyester material Globes heat and impact resistant, internally fluted glass Standard Finishes: Copper-free aluminum epoxy powder coat Krydon material high reflectance white Stainless steel natural Electrical Ratings: 120, multi-tap* (120, 208, 240 and 277), tri-tap (120, 277, 47) 480, 600 volts 50 250W HPS; 70 250W MH Options: The following special options are available from the factory by adding suffix to luminaire Cat. No.: Description Suffix Restricted Breathing Construction... S826 Class I, Division 2 & Zone 2 Suitabilty Cooler Operating Temperatures (T-Numbers) Restricted Breathing/Non-Sparking S865 Class I, Division 2 & Zone 2 Provides T code without conduit or cable seals Certified for IEC Zone 2... S826TB Furnished with terminal block, crimp terminals and dedicated voltage ballasts (no MT, DT or TT) Fused to protect ballast and capacitors against abnormal line conditions... S658* (Not available with /MT Ballast) (Not for use in Canada) (Not suitable for marine applications) Quick-Clip - Holds weight of housing when closed. No need to support luminaire while screwing the housing to the cover... S890 Ballast-Gard starter cut-out switch prevents starter pulsing when lamp is cycling or inoperative; prolongs ballast and ignitor life. Available for use with 50 150W LX HPS only... BG Instant restrike enables a hot HPS lamp to immediately restrike after a momentary loss of arc due to voltage fluctuation or power outage. It has no effect on the warm-up period of cold lamps. Available for use with 50 150W LX HPS only... IR Quartz auxiliary lighting comes to full brightness immediately and remains lit until the HID lamp attains 60 70% of full illumination. For non-hazardous locations only. (Note: QTZ lamp not included; use 100W single ended lamp Q100DC, Q100CL/DC, or 100Q/CL/DC) Consult factory for top-hat limitations... QTZ Factory assembled with H.I.D. lamps installed for additional labor savings... FA TEFLON coated globe for additional protection against breakage. For use with 50 150W HPS and 70 175W MH (G0 only).. S808 Note: Some T-numbers (operating temperatures) change. See "Temperature Performance Data" section. Stainless steel insert top hat with stainless steel threaded insert to attach ballast housing... S806 Note: BG and IR options cannot be used together. IR and QTZ options cannot be used together. Accessories: See pages 977 978 for complete listing. TEFLON is a registered trademark of E.I. dupont Co. *When ordering fuses for luminaires, option S658, you must specify the operating voltage. S658 cannot be ordered with /MT in the catalog number. 942 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

DMV Series 50-150W High Pressure Sodium For Combustible Dust Applications Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups E, F, G; Cl. III & Simultaneous Presence Marine & Wet Locations, R, 4, 4X; IP66 L To complete the catalog #, include information in notes 1, 2 and below. For guards and other optics see DMV Series - Ordering By Components page. BASIC CATALOG NUMBER Mounting Style Hub Size Lamp Watts With G0 Globe and P Guard With GR05 Glass Refractor * Pendant Mount /4 50 DMVS2A050GP DMVS2A050GR05 1 DMVSA050GP DMVSA050GR05 /4 70 DMVS2A070GP DMVS2A070GR05 1 DMVSA070GP DMVSA070GR05 /4 100 DMVS2A100GP DMVS2A100GR05 1 DMVSA100GP DMVSA100GR05 /4 150 DMVS2A150GP DMVS2A150GR05 1 DMVSA150GP DMVSA150GR05 Flexible Pendant Mount /4 50 DMVS2HA050GP DMVS2HA050GR05 /4 70 DMVS2HA070GP DMVS2HA070GR05 /4 100 DMVS2HA100GP DMVS2HA100GR05 /4 150 DMVS2HA150GP DMVS2HA150GR05 Ceiling Mount Thru-Feed Wall Mount Thru-Feed /4 50 DMVS2C050GP DMVS2C050GR05 1 DMVSC050GP DMVSC050GR05 /4 70 DMVS2C070GP DMVS2C070GR05 1 DMVSC070GP DMVSC070GR05 /4 100 DMVS2C100GP DMVS2C100GR05 1 DMVSC100GP DMVSC100GR05 /4 150 DMVS2C150GP DMVS2C150GR05 1 DMVSC150GP DMVSC150GR05 /4 50 DMVS2TW050GP DMVS2TW050GR05 1 DMVSTW050GP DMVSTW050GR05 /4 70 DMVS2TW070GP DMVS2TW070GR05 1 DMVSTW070GP DMVSTW070GR05 /4 100 DMVS2TW100GP DMVS2TW100GR05 1 DMVSTW100GP DMVSTW100GR05 /4 150 DMVS2TW150GP DMVS2TW150GR05 1 DMVSTW150GP DMVSTW150GR05 Quad-Mount /4 50 DMVS25Q050GP DMVS25Q050GR05 Pendant, /4 70 DMVS25Q070GP DMVS25Q070GR05 Adjustable Thru-Feed, /4 100 DMVS25Q100GP DMVS25Q100GR05 25 Angle, 12 1 /2 Angle /4 150 DMVS25Q150GP DMVS25Q150GR05 L Stanchion Mount 1 1 /2 50 DMVSJ050GP DMVSJ050GR05 25 Angle 1 1 /2 70 DMVSJ070GP DMVSJ070GR05 1 1 /2 100 DMVSJ100GP DMVSJ100GR05 1 1 /2 150 DMVSJ150GP DMVSJ150GR05 Stanchion Mount 1 1 /2 50 DMVSP050GP DMVSP050GR05 Straight 1 1 /2 70 DMVSP070GP DMVSP070GR05 1 1 /2 100 DMVSP100GP DMVSP100GR05 1 1 /2 150 DMVSP150GP DMVSP150GR05 * For GR02 Type II Refractor, change "GR05" at end of catalog number to "GR02". Ex. DMVS2A050GR02 For GR0 Type III Refractor, change "GR05" at end of catalog number to "GR0". Ex. DMVS2A050GR0 1. Add voltage suffix to end of catalog number Standard Voltage Ballasts 60Hz NEC/UL CEC/CSA (cul) Voltage Multi Tap Dual Tap 120V 480V Tri Tap Dual Tap 120V Suffix /MT /DT /120 /480 /TT /DT /120 2. 150W HPS Luminaires: For 55V lamps - add suffix LX; for 100V lamps - add suffix CE. 50W HPS luminaire is dual tap only.. Options - Add the required option suffixes, see page 942, in alpha-numeric order. Optional Voltage Ballasts - 50 or 60Hz CEC/CSA (cul) - CWI Isolated Ballasts EXPORT Voltage 208V CWI 240V CWI 480V CWI 600V CWI 220V 60Hz 220V 50Hz 20V 50Hz 240V 50Hz Suffix /208CWI /240CWI /480CWI /600CWI /220 /220 50 /20 50 /240 50 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 94

L DMV Series - 150-250W Pulse Start Metal Halide For Combustible Dust Applications Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups E, F, G; Cl. III & Simultaneous Presence (175W max) Marine & Wet Locations, R, 4, 4X; IP66 To complete the catalog #, include information in notes 1 and 2 below. For guards and other optics see DMV Series - Ordering By Components page. Mounting Style Pendant Mount Flexible Pendant Mount Hub Size Lamp Watts With G0 Globe and P Guard BASIC CATALOG NUMBER With GR05 Glass Refractor * /4 150 DMVM2A150GP S828 DMVM2A150GR05 S828 1 DMVMA150GP S828 DMVMA150GR05 S828 /4 175 DMVM2A175GP S828 DMVM2A175GR05 S828 1 DMVMA175GP S828 DMVMA175GR05 S828 /4 200 DMVM2A200GP S828 DMVM2A200GR05 S828 1 DMVMA200GP S828 DMVMA200GR05 S828 /4 250 DMVM2A250GP S828 DMVM2A250GR05 S828 1 DMVMA250GP S828 DMVMA250GR05 S828 /4 150 DMVM2HA150GP S828 DMVM2HA150GR05 S828 /4 175 DMVM2HA175GP S828 DMVM2HA175GR05 S828 /4 200 DMVM2HA200GP S828 DMVM2HA200GR05 S828 /4 250 DMVM2HA250GP S828 DMVM2HA250GR05 S828 L Ceiling Mount Thru-Feed Wall Mount Thru-Feed Quad-Mount Pendant, Adjustable Thru-Feed, 25 Angle, 12 1 /2 Angle /4 150 DMVM2C150GP S828 DMVM2C150GR05 S828 1 DMVMC150GP S828 DMVMC150GR05 S828 /4 175 DMVM2C175GP S828 DMVM2C175GR05 S828 1 DMVMC175GP S828 DMVMC175GR05 S828 /4 200 DMVM2C200GP S828 DMVM2C200GR05 S828 1 DMVMC200GP S828 DMVMC200GR05 S828 /4 250 DMVM2C250GP S828 DMVM2C250GR05 S828 1 DMVMC250GP S828 DMVMC250GR05 S828 /4 150 DMVM2TW150GP S828 DMVM2TW150GR05 S828 1 DMVMTW150GP S828 DMVMTW150GR05 S828 /4 175 DMVM2TW175GP S828 DMVM2TW175GR05 S828 1 DMVMTW175GP S828 DMVMTW175GR05 S828 /4 200 DMVM2TW200GP S828 DMVM2TW200GR05 S828 1 DMVMTW200GP S828 DMVMTW200GR05 S828 /4 250 DMVM2TW250GP S828 DMVM2TW250GR05 S828 1 DMVMTW250GP S828 DMVMTW250GR05 S828 /4 150 DMVM25Q150GP S828 DMVM25Q150GR05 S828 /4 175 DMVM25Q175GP S828 DMVM25Q175GR05 S828 /4 200 DMVM25Q200GP S828 DMVM25Q200GR05 S828 /4 250 DMVM25Q250GP S828 DMVM25Q250GR05 S828 Stanchion Mount 1 1 /2 150 DMVMJ150GP S828 DMVMJ150GR05 S828 25 Angle 1 1 /2 175 DMVMJ175GP S828 DMVMJ175GR05 S828 1 1 /2 200 DMVMJ200GP S828 DMVMJ200GR05 S828 1 1 /2 250 DMVMJ250GP S828 DMVMJ250GR05 S828 Stanchion Mount 1 1 /2 150 DMVMP150GP S828 DMVMP150GR05 S828 Straight 1 1 /2 175 DMVMP175GP S828 DMVMP175GR05 S828 1 1 /2 200 DMVMP200GP S828 DMVMP200GR05 S828 1 1 /2 250 DMVMP250GP S828 DMVMP250GR05 S828 * For GR02 Type II Refractor, change "GR05" at end of catalog number to "GR02". Ex. DMVM2A150GR02-S828 For GR0 Type III Refractor, change "GR05" at end of catalog number to "GR0". Ex. DMVM2A150GR0-S828 1. Add voltage suffix to end of catalog number Standard Voltage Ballasts 60Hz NEC/UL CEC/CSA (cul) Voltage Multi Tap 120V 480V Tri Tap 120V Suffix /MT /120 /480 /TT /120 Optional Voltage Ballasts - 50 or 60Hz EXPORT Voltage 220V 60Hz 220V 50Hz 20V 50Hz 240V 50Hz Suffix /220 /220 50 /20 50 /240 50 2. Options - Add the required option suffixes, see page 942, in alpha-numeric order. 944 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

DMV Series 70 250W Metal Halide For Combustible Dust Applications Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups E, F, G; Cl. III & Simultaneous Presence (175W max) Marine & Wet Locations, R, 4, 4X; IP66 L To complete the catalog #, include information in notes 1, 2 and below. For guards and other optics see DMV Series - Ordering By Components page. Mounting Style Pendant Mount Flexible Pendant Mount Hub Size Lamp Watts With G0 Globe and P Guard BASIC CATALOG NUMBER With GR05 Glass Refractor * /4 70 DMVM2A070GP DMVM2A070GR05 1 DMVMA070GP DMVMA070GR05 /4 100 DMVM2A100GP DMVM2A100GR05 1 DMVMA100GP DMVMA100GR05 /4 175 DMVM2A175GP DMVM2A175GR05 1 DMVMA175GP DMVMA175GR05 /4 250 DMVM2A250GP DMVM2A250GR05 1 DMVMA250GP DMVMA250GR05 /4 70 DMVM2HA070GP DMVM2HA070GR05 /4 100 DMVM2HA100GP DMVM2HA100GR05 /4 175 DMVM2HA175GP DMVM2HA175GR05 /4 250 DMVM2HA250GP DMVM2HA250GR05 Ceiling Mount Thru-Feed Wall Mount Thru-Feed /4 70 DMVM2C070GP DMVM2C070GR05 1 DMVMC070GP DMVMC070GR05 /4 100 DMVM2C100GP DMVM2C100GR05 1 DMVMC100GP DMVMC100GR05 /4 175 DMVM2C175GP DMVM2C175GR05 1 DMVMC175GP DMVMC175GR05 /4 250 DMVM2C250GP DMVM2C250GR05 1 DMVMC250GP DMVMC250GR05 /4 70 DMVM2TW070GP DMVM2TW070GR05 1 DMVMTW070GP DMVMTW070GR05 /4 100 DMVM2TW100GP DMVM2TW100GR05 1 DMVMTW100GP DMVMTW100GR05 /4 175 DMVM2TW175GP DMVM2TW175GR05 1 DMVMTW175GP DMVMTW175GR05 /4 250 DMVM2TW250GP DMVM2TW250GR05 1 DMVMTW250GP DMVMTW250GR05 Quad-Mount /4 70 DMVM25Q070GP DMVM25Q070GR05 Pendant, Adjustable /4 100 DMVM25Q100GP DMVM25Q100GR05 Thru-Feed, 25 Angle, /4 175 DMVM25Q175GP DMVM25Q175GR05 12 1 /2 Angle /4 250 DMVM25Q250GP DMVM25Q250GR05 L Stanchion Mount 1 1 /2 70 DMVMJ070GP DMVMJ070GR05 25 Angle 1 1 /2 100 DMVMJ100GP DMVMJ100GR05 1 1 /2 175 DMVMJ175GP DMVMJ175GR05 1 1 /2 250 DMVMJ250GP DMVMJ250GR05 Stanchion Mount 1 1 /2 70 DMVMP070GP DMVMP070GR05 Straight 1 1 /2 100 DMVMP100GP DMVMP100GR05 1 1 /2 175 DMVMP175GP DMVMP175GR05 1 1 /2 250 DMVMP250GP DMVMP250GR05 * For GR02 Type II Refractor, change "GR05" at end of catalog number to "GR02". Ex. DMVM2A070GR02 For GR0 Type III Refractor, change "GR05" at end of catalog number to "GR0". Ex. DMVM2A070GR0 1. Add voltage suffix to end of catalog number Standard Voltage Ballasts 60Hz NEC/UL CEC/CSA (cul) Voltage Multi Tap 120V 480V Tri Tap 120V Suffix /MT /120 /480 /TT /120 Optional Voltage Ballasts - 50 or 60Hz CEC/CSA (cul) - CWI Isolated Ballasts - 175W and 250W MH only EXPORT Voltage 208V CWI 240V CWI 600V CWI 220V 60Hz 220V 50Hz 20V 50Hz 240V 50Hz Suffix /208CWI /240CWI /600CWI /220 /220 50 /20 50 /240 50 2. 70W ballast not available in 480V.. Options - Add the required option suffixes, see page 942, in alpha-numeric order. www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 945

L DMV Series Ordering by Components DMV luminaires are available in components. A complete luminaire consists of: I. Champ Cover (Mounting Module) II. DMV Ballast Housing Include voltage and required option(s) III. Globe, Refractor, Guard, Reflector I. Champ Cover (Mounting Module): Type Conduit Cat. # Pendant /4" APM2 1" APM Flexible Pendant /4" HPM2 Ceiling /4" CM2 1" CM Wall /4" TWM2 1" TWM Stanchion 25 Degree Angle 1 1 /2" JM5 Stanchion Straight 1 1 /2" PM5 Quad-Mount /4" QM25 II. Ballast Housings: Complete catalog number must have the voltage suffix (MT shown) and any options suffixes. Lamp Type Lamp Watts Cat. # High Pressure Sodium 50 DMVS050/MT 70 DMVS070/MT 100 DMVS100/MT 150 DMVS150/MT LX Metal Halide 70 DMVM070/MT 100 DMVM100/MT 175 DMVM175/MT 250 DMVM250/MT L III. Globe, Reflectors, Refractors, Guards: Type Cat. # Globe G0 Globe Teflon Coated G0S808 Globe Guard P Reflector Dome RD79 Reflector Angle RA79 Refractor Type 2 GR02 Refractor Type GR0 Refractor Type 5 GR05 Large Plastic Refractor Type 2 PGR02 Large Plastic Refractor Type PGR0 Large Plastic Refractor Type 5 PGR05 Refractor Guard P2 High Bay Reflector/Lens GRD4 946 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

DMV Series Family Tree L Champ H.I.D. Luminaires L *Plastic refractors are non-hazardous areas only (50-100W Max.) www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 947

L DMV Series Temperature Performance Data Champ H.I.D. Luminaires Lamp Rated Ambient C Class I, Division 2 Class II, Division 1 Class I, Zone 2 Globe (G0) w/ or w/o Reflector (RA79 or RD79)* Refractor (GR02 or GR0 or GR05) Refractor (G02 or G0 or G05) or Globe (G0) Globe (G0) with Reflector (RA79 or RD79) Simultaneous Presence Class I, Div. 2 Class II, Div. 1 (with G0 Globe only) Restricted Breathing Suffix S826 w/ Globe (G0) Globe (G0) with Reflector (RA79 or RD79) Factory Sealed Suffix S865 AEx na nr II Cat. # Wattage Type Group DMVS50 50 HPS 40 TA TA EFG T6 T6 TA T6 T6 T 75 DMVS50 50 HPS 55 T T EFG T5 T5 T T5 T5 T 85 DMVS50 50 HPS 65 T T EFG T4A T4A T T5 T5 T 90 DMVS70 70 HPS 40 TA TA EFG T6 T6 TA T6 T6 T 75 DMVS70 70 HPS 55 T T EFG T5 T5 T T5 T5 T 85 DMVS70 70 HPS 65 T T EFG T4A T4A T T5 T5 T 90 DMVS100 100 HPS 40 T2D T2D EFG T5 T5 TD T6 T6 T 75 DMVS100 100 HPS 55 T2C T2C EFG T4A T4A T2C T5 T5 T 85 DMVS100 100 HPS 65 T2C T2C T4 T4 T 90 DMVS150 150 HPS 40 T2B T2B EFG TC TC T2A T5 T5 T 75 DMVS150 150 HPS 55 T2B T2B EFG T4 T4 T 85 DMVS150 150 HPS 65 T2A T2B EFG T 85 DMVM70 70 MH 40 TC* TC TC T6 T6 T 60 DMVM70 70 MH 55 TB* TC T5 T5 T 75 DMVM70 70 MH 65 TA* TA T5 T5 T 85 DMVM100 100 MH 40 T* TA TC T5 T5 T 60 DMVM100 100 MH 55 T* TA T5 T5 T 75 DMVM100 100 MH 65 T2D* T2D T4 T4 T 85 DMVM150 150 MH PS 40 T2B EFG T4A T4A T4 T4 T 105 DMVM150 150 MH PS 55 T2A EFG T4 T4 T4 T4 T 105 DMVM150 150 MH PS 65 T2A T4 T4 T4 T4 T 105 DMVM175 175 MH 40 T2B* T2 EFG TC TC T2A T4 T4 T 85 DMVM175 175 MH 55 T2A* T2 EFG T4 T4 T 85 DMVM175 175 MH 65 T2A* T2 T T T 90 DMVM200 200 MH 40 T2 T4 T4 T 75 DMVM200 200 MH 55 T1 (25) T T T 90 DMVM250 250 MH 40 T2 T4 T4 T 75 DMVM250 250 MH 55 T1 (25) T T T 90 DMVF26 2 / 1 (26) CF 40 TA EFG T6 T6 T6 T6 T 60 DMVF9 / 1 (9) CF 40 TA EFG T6 T6 T6 T6 T 60 DMVF52 2 / 26 (52) CF 40 T EFG T6 T6 T6 T 60 DMVF64 2 / 2 (64) CF 40 T EFG T6 T6 T6 T 60 DMVF84 2 / 42 (84) CF 40 TA EFG T4A T4A T4 T4 90 DMVIG85 85 Induction 40 T T6 T6 60 DMVIG165 165 Induction 40 T T2D T2D T5 75 Supply Wire Suitable for C L The Class I, Division 2 T-codes apply to luminaires without the restricted breathing (S826) or factory sealed (S865) options. These luminaires are listed to UL 844. UL 844 specifies how the temperatures are measured. The Class I, Zone 2 T-codes are for luminaires that are additionally listed to UL 60079-15 that specify a different method for measuring temperatures. Since NEC 501.1 states that equipment "...for use in Class I, Zone 0, 1, or 2 locations shall be permitted in Class I, Division 2 locations..." then these luminaires are suitable for Class I, Division 2 but with lower temperature ratings. They also have the advantage of meeting the more rigorous mechanical tests of UL 844. *All DMVM 175W and below MH luminaires provided with Catalog number G0-S808 have a T2A T-code. For use with refractor only when this table indicates by means of a T-code that the refractor is suitable for use with Class I, Division 2 luminaires. 948 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

DMV Series Dimensions & Weights L Champ H.I.D. Luminaires Dimensions In Inches: Net Luminaire Weights (lbs.): Luminaire Series Lamp Watts Luminaire with Globe, Guard (lbs.) Lamp Watts Luminaire with Globe, Guard (lbs.) DMVS 50 2 70 2 1 /16 100 24 1 /16 150 26 1 /8 Pendant Mount Quad-Mount DMVM 70 21 100 21 1 /16 175 22 1 /4 250 24 Type Lbs. Type Lbs. Add for mounting modules: Pendant 1 1 /4 Flexible Pendant 1 1 /2 Ceiling 2 /4 Wall 4 1 /2 Quad Mount 1 /2 Angle Stanchion 1 /2 Straight Stanchion 4 1 /2 Add for reflectors: Dome 1 1 /4 0 Angle 1 /4 Deduct: 1 lb. for luminaire without P Guard. Add: 5 1 /2 lbs. for luminaire with GR05 refractor. 25 Angle Stanchion Mount Straight Stanchion Mount Top View Ceiling Mount L Wall Mount Luminaire with Globe, Guard, Reflectors www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 949

L DMV Series Photometric Data Champ H.I.D. Luminaires Lamp: 150W/E 2-1 /2 clear high pressure sodium (HPS) Total bare lamp lumens: 16000 NOTE: All data provided is for high pressure sodium luminaires with 150W/E 2-1 /2 clear lamps. Use conversion factors (multipliers) shown below for other clear lamp types and wattages. Consult Cooper Crouse-Hinds for additional photometric data on any Champ series luminaires. Luminaire with Globe and Dome Reflector Multipliers (for use with candela curve only). Luminaire Series DMVS Lamp Watts Conversion Factor 50 0.25 70 0.40 100 0.59 Isofootcandle Chart: Luminaire with Globe and Dome Reflector Luminaire spacing ratio: 1.90 L Coefficient of Utilization Effective Floor Cavity Reflectance 20% % Reflectance Room Cavity Ratio Eff. Ceil. Wall 1 2 4 5 50.759.64.551.476.418 80 0.719.582.480.400.40 10.68.50.424.42.28 50.740.627.58.465.406 70 0.70.570.471.94.4 10.669.52.418.8.280 50.70.595.512.442.88 50 0.672.548.455.81.24 10.645.506.408.2.276 50.669.567.488.422.70 0 0.646.528.49.68.14 10.622.492.99.25.270 50.640.541.466.40.54 10 0.619.508.424.56.05 10.600.479.89.18.265 0 0.582.459.70.299.247 % Reflectance Room Cavity Ratio Eff. Ceil. Wall 6 7 8 9 10 50.71.0.294.267.21 80 0.296.257.224.198.164 10.24.208.174.151.121 50.62.2.288.262.226 70 0.291.252.221.195.164 10.28.204.17.151.121 50.45.09.275.250.218 50 0.28.244.215.190.159 10.25.201.170.148.119 50.1.294.265.240.209 0 0.275.29.208.184.154 10.21.196.168.146.116 50.17.284.25.21.201 10 0.266.2.20.180.150 10.227.19.165.14.114 0 0.210.177.149.128.100 Isofootcandle Chart: Luminaire with Globe and 0 Angle Reflector Isofootcandle charts show illumination in footcandles on work plane 10 feet below light center. Multiply by factor shown to convert to other mounting heights. Height (Ft.) Factor Height (Ft.) Factor 8 1.56 16.91 12.694 20.250 14.510 950 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

Champ H.I.D. Luminaires VMV, LMV, DMV, VMV High Wattage & N2MV Series Accessories L Globes Reflectors G54 G24 G0 Lamp Watts Luminaire Series Type Cat. # 5 150 LMVS, LMVM Heat/impact resistant G54 50 175 VMVM, VMVS Heat/impact resistant G24 50 250 DMVM, DMVS Heat/impact resistant G0 200 400 VMVS Heat/impact resistant G0 250 VMVM Heat/impact resistant G0 50 175 N2MVM, N2MVS Heat/impact resistant G0 Guards Dome Krydon material 0 Angle Krydon material Lamp Watts Luminaire Series Dome Cat. # Angle Cat. # 5 150 LMVS, LMVM RD66 RA66 50 175 VMVM, VMVS RD70 RA70 50 250 DMVM, DMVS RD79 RA79 200 400 VMVS RD79 RA79 250 VMVM RD79 RA79 50 175 N2MV, N2MVF(B) RD79 RA740 Reflector / Lens Etched Alzak aluminum reflector/tempered glass lens Lamp Watts Luminaire Series Type Cat. # P50 use with G54 globe P21 use with G24 globe P use with G0 globe 200 400 VMVM, VMVS Reflector/Lens GRD4 70 250 DMVS, DMVM Reflector/Lens GRD4 Globes Teflon Coated Teflon coated for increased shatter protection L Lamp Watts Luminaire Series Cat. # 50 175 VMVM, VMVS G24 S808 50 175 DMVM, DMVS G0 S808 Alzak is a registered trademark of Alcoa. Teflon is a registered trademark of E.I. DuPont Co. P2 use with refractors Lamp Watts Luminaire Series Type Cat. # 5 150 LMVS, LMVM Copper-free aluminum P50 50 175 VMVM, VMVS Copper-free aluminum P21 50 250 DMVM, DMVS Stainless steel P 200 400 VMVS Stainless steel P 250 VMVM Stainless steel P Refractors All Stainless steel P2 50 175 N2MVM, N2MVS Stainless steel P www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 977

L Champ H.I.D. Luminaires VMV, LMV, DMV, VMV High Wattage & N2MV Series Accessories Refractors Lamp Watts 50 175 200 400 50 250 R2, R5, PR2, PR, PR5 GR02, GR0, GR05 Luminaire Series VMVM, VMVS VMVM, VMVS DMVS, DMVM 50 175 N2MV I.E.S. Type Glass Cat. # I.E.S. Distribution Curves II R2 PR2 III R PR V R5 PR5 II GR02 III GR05 V GR05 II GR02 PGR02 III GR0 PGR0 V GR05 PGR05 Plastic (100W max. non-hazardous) Cat. # Safety Lighting Options Description Suffix Quartz Auxiliary Lamp QTZ The quartz auxiliary lamp comes to full brightness instantly and remains lit until the H.I.D. lamp attains 60 70% of full illumination. Quartz auxiliary lamps can be used with all DMV, VMV and VMV High Wattage series Champ luminaires. Use for non-hazardous applications ONLY. VMV luminaires (50 175W) ordered with this option must use large glass refractor optics, not compact refractors. 100W single ended lamp Q100CL/DC, Q100DC or 100Q/CL/DC NOT furnished Instant Restrike IR Factory installed instant restrike device will restart a hot High Pressure Sodium lamp after a momentary power interruption, without the typical delay for cooling. For use in 50 150W "LX" HPS luminaires. Ballast-Gard BG Ballast-Gard starter cut-out switch prevents starter pulsing after a time delay of approximately two minutes if the lamp fails to start. For use in 50 400 watt HPS luminaires only. L Type I Type II Type III Type V Compact Refractors Lamp Watts Luminaire Series 50 175 VMVM, VMVS I III V Optional stainless steel wire guard I.E.S. Type Glass Cat. # G241 G24 G245 P241 978 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

L LMV Series 50-150W Low Profile - Medium Base Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups E, F, G; Cl. III & Simultaneous Presence (HPS 5W, 50W) Marine & Wet Locations, R, 4, 4X; IP66 L Applications: LMV series Champ luminaires are used: In applications involving low luminaire mounting heights or restricted mounting space or where luminaire weight is a factor In areas in which ignitible concentrations of flammable gases or vapors will be present only due to abnormal, unusual, or accidental conditions Where combustible dusts are present Where combustible dusts and flammable vapors are present simultaneously In elevated ambient temperatures often found in industrial applications In marine applications where water spray and corrosive atmospheres are considerations Wherever the damaging effects of wind, snow, sleet, or hot sun are found In manufacturing plants, chemical, petrochemical, and other industrial process facilities, waste or sewage treatment facilities, offshore or dockside installations, cold storage facilities, parking garages or wherever dust, dirt, water, vibration and rough usage are a problem Features: Compact, lightweight design is ideal for low mounting heights. Cast copper-free aluminum construction (less than 0.4 of 1% copper) and epoxy powder finish provide excellent resistance to corrosion. Seven mounting arrangements to suit any lighting layout pendant, flexible pendant, ceiling, wall, straight stanchion, angle stanchion, and quad-mount. Wide range of lamp wattages to meet specifiers' needs: 50, 70, 100 and 150 watt (HPS); 70 and 100 watt (MH) medium base lamps. Hinged ballast housing for ease of installation and maintenance. All luminaires designed to perform in a 40 C ambient temperature. Selected luminaires are suitable for ambient temperatures up to 65 C. Superior gasketing seals between the mounting module, housing, and optical assembly for optimum performance in wet and corrosive environments. Hubs with an integral conduit stop and bushing to help prevent damage to field wiring during installation. Low ambient capability to 40 C. Dome and 0 angle reflectors made of bright white Krydon material provide superior reflectivity, with twist-on feature requiring no tools or additional hardware. Will not chip, peel, dent, rust, or corrode. Grounding wire for safety. Medium base lamp sockets. Certifications and Compliances: NEC/CEC: Class I, Division 2, Groups A, B, C, D HPS 5W, 50W Class II, Class III & Simultaneous Presence (Class I, Division 2 and Class II) Class I, Zone 2 IEC: Zone 2 Ex nr IIC UL Standards: 844 Hazardous (Classified) Locations 1598 Luminaires 1598A Marine Locations CSA Standards: C22.2 No. 17 IEC Standards: 60079-15 Standard Materials: Ballast housings and mountings copper-free aluminum (less than 0.4 of 1%) Exterior hardware stainless steel Reflectors (dome and angle) Krydon fiberglass-reinforced polyester material Globes heat and impact resistant, internally fluted glass Guards copper-free aluminum Standard Finishes: Copper-free aluminum epoxy powder coat Krydon material high reflectance white Stainless steel natural Electrical Ratings: 120 volts, dual-tap (120/277), multi-tap* 50, 70, 100, 150 watts HPS** 70 and 100 watts MH * When ordering fuses for luminaires, option S658, you must specify the operating voltage. S658 cannot be ordered with /MT in the catalog number. ** 150W HPS is not avalable with multi tap ballast. 120V only. Options: The following special options are available from the factory by adding suffix to luminaire Cat. No.: Description Suffix Restricted Breathing Construction... S826 Class I, Division 2 & Zone 2 Suitability Cooler Operating Temperatures (T-Numbers) Certified for IEC Zone 2... S826TB Furnished with terminal block, crimp terminals and dedicated voltage ballasts (no MT, DT, or TT) Fused to protect ballast and capacitors against abnormal line conditions... S658* (Not for use in Canada) (Not suitable for marine applications) Quick-Clip - Holds weight of housing when closed. No need to support luminaire while screwing the housing to the cover... S890 Ballast-Gard starter cut-out switch prevents starter pulsing when lamp is cycling or inoperative; prolongs ballast and ignitor life. Available for use with 50 100W HPS only... BG Factory assembled with H.I.D. lamps installed for additional labor savings... FA Stainless steel insert top hat with stainless steel threaded insert to attach ballast housing... S806 Accessories: See pages 977 978 for complete listing 94 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

LMV Series 50 150W High Pressure Sodium Low Profile - Medium Base Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups E, F, G; Cl. III & Simultaneous Presence (5W, 50W) Marine & Wet Locations, R, 4, 4X; IP66 L To complete the catalog #, include information in notes 1, 2 and below. For guards and other optics see LMV Series - Ordering By Components page. Mounting Style Hub Size Lamp Watts BASIC CATALOG NUMBER With G54 Globe and P50 Guard Pendant Mount /4 50 LMVS2A050GP 1 LMVSA050GP /4 70 LMVS2A070GP 1 LMVSA070GP /4 100 LMVS2A100GP 1 LMVSA100GP /4 150 LMVS2A150GP 1 LMVSA150GP Flexible Pendant Mount /4 50 LMVS2HA050GP /4 70 LMVS2HA070GP /4 100 LMVS2HA100GP /4 150 LMVS2HA150GP Ceiling Mount Thru-Feed /4 50 LMVS2C050GP 1 LMVSC050GP /4 70 LMVS2C070GP 1 LMVSC070GP /4 100 LMVS2C100GP 1 LMVSC100GP /4 150 LMVS2C150GP 1 LMVSC150GP Wall Mount Thru-Feed /4 50 LMVS2TW050GP 1 LMVSTW050GP /4 70 LMVS2TW070GP 1 LMVSTW070GP /4 100 LMVS2TW100GP 1 LMVSTW100GP /4 150 LMVS2TW150GP 1 LMVSTW150GP Quad Mount Pendant, Adjustable Thru-Feed, 25 Angle, 12 1 /2 Angle /4 50 LMVS25Q050GP /4 70 LMVS25Q070GP /4 100 LMVS25Q100GP /4 150 LMVS25Q150GP L Stanchion Mount 25 Angle 1 1 /2 50 LMVSJ050GP 1 1 /2 70 LMVSJ070GP 1 1 /2 100 LMVSJ100GP 1 1 /2 150 LMVSJ150GP Stanchion Mount Straight 1 1 /2 50 LMVSP050GP 1 1 /2 70 LMVSP070GP 1 1 /2 100 LMVSP100GP 1 1 /2 150 LMVSP150GP 1. Add voltage suffix to end of catalog number Standard Voltage Ballasts 60Hz NEC/UL CEC/CSA (cul) Voltage Multi Tap Dual Tap 120V 480V Tri Tap Dual Tap 120V Suffix /MT /DT /120 /480 /TT /DT /120 2. 150W HPS Luminaires: For 55V lamps - add suffix LX. 50W HPS luminaire is dual tap only. 150W HPS is not avalable with multi tap ballast. 120V only.. Options - Add the required option suffixes, see page 94, in alpha-numeric order. www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 95

L LMV Series 70-100W Metal Halide Low Profile - Medium Base Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Marine & Wet Locations, R, 4, 4X; IP66 To complete the catalog #, include information in notes 1, 2 and below. For guards and other optics see LMV Series - Ordering By Components page. Mounting Style Hub Size Lamp Watts BASIC CATALOG NUMBER With G54 Globe and P50 Guard Pendant Mount /4 70 LMVM2A070GP 1 LMVMA070GP /4 100 LMVM2A100GP 1 LMVMA100GP Flexible Pendant Mount /4 70 LMVM2HA070GP /4 100 LMVM2HA100GP Ceiling Mount Thru-Feed /4 70 LMVM2C070GP 1 LMVMC070GP /4 100 LMVM2C100GP 1 LMVMC100GP Wall Mount Thru-Feed /4 70 LMVM2TW070GP 1 LMVMTW070GP /4 100 LMVM2TW100GP 1 LMVMTW100GP Stanchion Mount 1 1 /2 70 LMVMJ070GP 25 Angle 1 1 /2 100 LMVMJ100GP L Stanchion Mount 1 1 /2 70 LMVMP070GP Straight 1 1 /2 100 LMVMP100GP 1. Add voltage suffix to end of catalog number Standard Voltage Ballasts 60Hz NEC/UL CEC/CSA (cul) Voltage Multi Tap 120V 480V Tri Tap 120V Suffix /MT /120 /480 /TT /120 2. 70W ballast not available in 480V.. Options - Add the required option suffixes, see page 94, in alpha-numeric order. 96 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

LMV Series Ordering by Components L LMV luminaires are available in components. A complete luminaire consists of: I. Champ Cover (Mounting Module) II. LMV Ballast Housing Include voltage and required option(s) III. Globe, Guard, Reflector I. Champ Cover (Mounting Module): Type Conduit Cat. # Pendant /4" APM2 1" APM Flexible Pendant /4" HPM2 Ceiling /4" CM2 1" CM Wall /4" TWM2 1" TWM Stanchion 25 Degree Angle 1 1 /2" JM5 Stanchion Straight 1 1 /2" PM5 Quad-Mount /4" QM25 II. Ballast Housings: Complete catalog number must have the voltage suffix (MT shown) and any options suffixes. Lamp Type Lamp Watts Cat. # High Pressure Sodium 50 LMVS050/120 70 LMVS070/MT 100 LMVS100/MT 150 LMVS150/120 LX Metal Halide 70 LMVM070/MT 100 LMVM100/MT III. Globe, Guards and Reflectors: Type Cat. # Globe G54 Globe Guard P50 Reflector Dome RD66 Reflector Angle RA66 L www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 97

LMV Series Temperature Performance Data L Champ H.I.D. Luminaires Lamp Rated Ambient C Class I, Division 2 Class II, Division 1 Class I, Zone 2 Globe (G54) w/ or w/o Reflector (RA66 or Globe (G54) w/ or w/o Reflector (RA66 or Restricted Breathing Suffix S826 w/ Factory Sealed Suffix S865 Simultaneous Presence Class I, Div. 2 Supply Wire Suitable Cat. # Wattage Type RD66) Group RD66) Class II, Div. 1 Globe (G24) AEx na nr II for C LMVS50 50 HPS 40 T2D EFG TC T2B T5 T N/A LMVS50 50 HPS 55 T2C T4 T 75 LMVS50 50 HPS 65 T2C T4 T 85 LMVS70 70 HPS 40 T2B T4 T 75 LMVS70 70 HPS 55 T2B T4 T 85 LMVS100 100 HPS 40 T2 T4 T 85 LMVS100 100 HPS 50 T T 90 LMVM70 70 MH 40 T2B T4 T 75 LMVM70 70 MH 55 T2B T4 T 85 LMVM100 100 MH 40 T T 85 LMVM150 150 HPS 40 T1 50 C 85 The Class I, Division 2 T-codes apply to luminaires without the restricted breathing (S826) or factory sealed (S865) options. These luminaires are listed to UL 844. UL 844 specifies how the temperatures are measured. The Class I, Zone 2 T-codes are for luminaires that are additionally listed to UL 60079-15 that specify a different method for measuring temperatures. Since NEC 501.1 states that equipment "...for use in Class I, Zone 0, 1, or 2 locations shall be permitted in Class I, Division 2 locations..." then these luminaires are suitable for Class I, Division 2 but with lower temperature ratings. They also have the advantage of meeting the more rigorous mechanical tests of UL 844. L www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 99

L LMV Series Dimensions and Weights Champ H.I.D. Luminaires Dimensions In Inches: Luminaire Net Weights: Luminaire Series Lamp Watts Luminaire with Globe, Guard (lbs.) Pendant Mount Wall Mount Top View Ceiling Mount LMVS 50 7 /4 70 8 1 /4 100 8 /4 150 9 1 /4 LMVM 70 9 100 9 Type Lbs. Add for mounting modules: Pendant 1 1 /4 Flexible Pendant 1 1 /2 Ceiling 2 /4 Quad-Mount 1 /2 Wall 4 1 /2 Angle Stanchion 1 /2 Straight Stanchion 4 1 /2 Type lbs. Add for reflectors: Dome 1.0 0 Angle 1.0 Deduct for luminaire without guard: P50 Guard 1 /2 Quad-Mount Luminaire with Globe, Guard, Reflectors L Straight Stanchion Mount 25 Angle Stanchion Mount 940 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

LMV Series Photometric Data L Champ H.I.D. Luminaires Lamp: 100W/E-17 high pressure sodium (HPS) Total bare lamp lumens: 9500 All data provided is for high pressure sodium luminaires with 100W/E-17 clear lamps. Use conversion factors (multipliers) shown below for other lamp types and wattages. Consult Cooper Crouse-Hinds for additional photometric data on any Champ Series. Luminaire with Globe and Dome Reflector Multipliers (for use with candela curve only). Conversion Luminaire Series Lamp Watts Factor 5 0.24 LMVS 50 0.42 70 0.67 150 1.68 Isofootcandle Chart: Luminaire with Globe and Dome Reflector Luminaire spacing ratio: 2.0 Coefficient of Utilization Effective Floor Cavity Reflectance 20% % Reflectance Room Cavity Ratio Eff. Ceil. Wall 1 2 4 5 50.722.628.545.47.41 80 0.691.579.487.408.46 10.66.57.441.58.296 50.705.61.54.46.40 70 0.676.568.479.40.40 10.650.51.46.55.29 50.671.585.511.442.87 50 0.647.548.464.90.2 10.627.514.426.49.289 50.641.560.489.424.71 0 0.62.529.450.79.22 10.605.501.416.42.284 50.614.57.470.407.56 10 0.598.510.46.67.41 10.584.488.407.5.279 0 0.568.471.91.19.26 Isofootcandle Chart: Luminaire with Globe and 0 Angle Reflector L % Reflectance Room Cavity Ratio Eff. Ceil Wall 6 7 8 9 10 50.66.24.288.261.226 80 0.00.259.225.199.165 10.25.215.180.156.127 50.58.18.282.256.221 70 0.295.255.22.196.165 10.249.212.179.156.126 50.4.05.271.246.214 50 0.288.248.217.192.161 10.246.209.177.154.124 50.0.292.261.27.206 0 0.280.24.210.186.157 10.242.205.175.152.122 50.17.282.251.228.199 10 0.272.27.206.182.152 10.28.202.172.149.120 0 0.22.187.158.16.107 Isofootcandle charts show illumination in footcandles on work plane 10 feet below light center. Multiply by factor shown to convert to other mounting heights. Height (Ft.) Factor Height (Ft.) Factor 6 2.78 14 0.51 8 1.56 16 0.9 12 0.70 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 941

L N2MV Series 50-175W Non-metallic Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Cl. II, Groups F, G Cl. III & Simultaneous Presence (100W max) Marine & Wet Locations, R, 4, 4X; IP56 L Applications: N2MV series Champ luminaires are used: In areas in which ignitable concentrations of flammable gases or vapors will be present due to abnormal, unusual or accidental conditions. In installations where moisture, dirt, vibration, corrosion or rough usage are concerns. Wherever the damaging effects of water, wind, snow, sleet, hot sun or any combination of these elements are found. Ideal for marine use; resists the harmful effects of salt water. Withstands the harshest of corrosive environments. To provide low wattage spot and floodlighting. For general area lighting. In areas where the ambient temperature will get as low as 40 C ( 40 F). In manufacturing plants, refineries, chemical, petrochemical and other industrial process facilities, wastewater and sewage treatment facilities, offshore, dockside and harbor installations as well as other heavy industrial applications. Features: Housing and mounting modules made of polyphenylene sulfide (PPS) for strength and maximum resistance to corrosion. Pendant mounting module equipped with integral hub set screws for vibration resistance. Hubs are provided with an integral bushing to help prevent damage to field wiring during installation and ground connection for positive bonding. Guard, hub inserts, stanchion elbow and hardware made of stainless steel for maximum resistance to corrosion. Grounding wire for safety. Stainless steel open bottom guard permits direct access to the globe for easy relamping. Hinged assembly allows the luminaire to hang free during installation to permit the use of both hands when wiring. One external captive screw for ease of installation. Handle hinge assembly doubles as a handle for ease of installation, especially when carrying up a ladder. Certifications and Compliances: NEC and CEC: Class I, Division 2, Groups A, B, C, D 100W Maximum Class II, Class III & Simultaneous Presence (Class I, Division 2 and Class II) UL Standards: 844 Hazardous (Classified) Locations 1598 Luminaires 1598A Marine Locations CSA Standards C22.2 No. 17 Standard Materials: Housing, mounting modules, component pallets polyphenylene sulfide (PPS) Guard, hub inserts, stanchion elbow, hardware stainless steel Globe heat tempered Gaskets silicone rubber Electrical Ratings: 120, multi-tap/mt (120, 208, 240 and 277), Dual-Tap/DT (120, 277 volts), Tri-Tap/TT (120, 277, 47 volts) 480 volt, 600 volt, 220 / 240 volt-50 Hz 50 150W HPS; 70 175W MH and Pulse Start MH Options: The following special options are available from the factory by adding suffix to luminaire Cat. No.: Description Suffix Wall Mount Arm. For converting ceiling mount luminaire to a wall mount... N2MV-WM1 Ballast-Gard starter cut-out switch. Prevents starter pulsing when lamp is cycling or inoperative; prolongs ballast and ignitor life. Available for use with 50 150 watt HPS... BG Factory Assembled. For a factory assembled luminaire with lamp installed... FA Instant Restrike. Enables a hot HPS lamp to immediately restrike after a momentary loss of arc due to voltage fluctuation or power outage. It has no effect on the warm-up period of cold lamps. Available for use with 50 150W LX HPS only... IR Quartz Auxiliary Lighting. Comes to full brightness immediately and remains lit until the HID lamp attains 60 70% of full illumination. For non-hazardous locations only. (Note: QTZ lamp not included; use 100W single ended lamp Q100DC, Q100CL/DC, or 100Q/CL/DC) Consult factory for top-hat limitations... QTZ Fused. To protect ballast and capacitor against abnormal line conditions... S658 (Not available with /MT ballast ) (Not for use in Canada) (Not suitable for marine applications) Furnished with Lamps... S714 Teflon Coated Globe. For additional protection against breakage. For use with 50 100W HPS, 70 175W MH and pulse start MH... S808 Accessories: See pages 977 978 for complete listing. 960 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

N2MV Series 50 150W High Pressure Sodium Non-metallic Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Cl. II, Groups F, G Cl. III & Simultaneous Presence (100W max) Marine & Wet Locations, R, 4, 4X; IP56 L To complete the catalog #, include information in notes 1, 2 and below. For guards and other optics see N2MV Series - Ordering By Components page. Mounting Style Hub Size Lamp Watts With G0 Globe and P Guard BASIC CATALOG NUMBER With GR05 Glass Refractor * Pendant Mount /4 50 N2MVS2A050GP N2MVS2A050GR05 1 N2MVSA050GP N2MVSA050GR05 /4 70 N2MVS2A070GP N2MVS2A070GR05 1 N2MVSA070GP N2MVSA070GR05 /4 100 N2MVS2A100GP N2MVS2A100GR05 1 N2MVSA100GP N2MVSA100GR05 /4 150 N2MVS2A150GP N2MVS2A150GR05 1 N2MVSA150GP N2MVSA150GR05 Ceiling Mount Thru-Feed /4 50 N2MVS2C050GP N2MVS2C050GR05 1 N2MVSC050GP N2MVSC050GR05 /4 70 N2MVS2C070GP N2MVS2C070GR05 1 N2MVSC070GP N2MVSC070GR05 /4 100 N2MVS2C100GP N2MVS2C100GR05 1 N2MVSC100GP N2MVSC100GR05 /4 150 N2MVS2C150GP N2MVS2C150GR05 1 N2MVSC150GP N2MVSC150GR05 Stanchion 1 1 /2 50 N2MVSJ050GP N2MVSJ050GR05 Mount 1 1 /2 70 N2MVSJ070GP N2MVSJ070GR05 25 Angle 1 1 /2 100 N2MVSJ100GP N2MVSJ100GR05 1 1 /2 150 N2MVSJ150GP N2MVSJ150GR05 * For GR02 Type II Refractor, change "GR05" at end of catalog number to "GR02". Ex. N2MVS2A050GR02 For GR0 Type III Refractor, change "GR05" at end of catalog number to "GR0". Ex. N2MVS2A050GR0 1. Add voltage suffix to end of catalog number Standard Voltage Ballasts 60Hz NEC/UL CEC/CSA (cul) Voltage Multi Tap Dual Tap 120V 480V Tri Tap Dual Tap 120V Suffix /MT /DT /120 /480 /TT /DT /120 Optional Voltage Ballasts - 50 or 60Hz CEC/CSA (cul) - CWI Isolated Ballasts EXPORT Voltage 208V CWI 240V CWI 480V CWI 600V CWI 220V 60Hz 220V 50Hz 20V 50Hz 240V 50Hz Suffix /208CWI /240CWI /480CWI /600CWI /220 /220 50 /20 50 /240 50 2. 150W HPS Luminaires: For 55V lamps - add suffix LX; for 100V lamps - add suffix CE. 50W HPS luminaire is dual tap only.. Options - Add the required option suffixes, see page 960, in alpha-numeric order. L www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 961

L N2MV Series 150 175W Pulse Start Metal Halide Non-metallic Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Cl. II, Groups F, G Cl. III & Simultaneous Presence (100W max) Marine & Wet Locations, R, 4, 4X; IP56 To complete the catalog #, include information in notes 1 and 2 below. For guards and other optics see N2MV Series - Ordering By Components page. Mounting Style Hub Size Lamp Watts With G0 Globe and P Guard * BASIC CATALOG NUMBER With GR05 S828 Glass Refractor Pendant Mount /4 150 N2MVM2A150GP S828 N2MVM2A150GR05 S828 1 N2MVMA150GP S828 N2MVMA150GR05 S828 /4 175 N2MVM2A175GP S828 N2MVM2A175GR05 S828 1 N2MVMA175GP S828 N2MVMA175GR05 S828 Ceiling Mount Thru-Feed /4 150 N2MVM2C150GP S828 N2MVM2C150GR05 S828 1 N2MVMC150GP S828 N2MVMC150GR05 S828 /4 175 N2MVM2C175GP S828 N2MVM2C175GR05 S828 1 N2MVMC175GP S828 N2MVMC175GR05 S828 Stanchion Mount 1 1 /2 150 N2MVMJ150GP S828 N2MVMJ150GR05 S828 25 Angle 1 1 /2 175 N2MVMJ175GP S828 N2MVMJ175GR05 S828 * For GR02 Type II Refractor, change "GR05" at end of catalog number to "GR02". Ex. N2MVM2A150GR02-S828 For GR0 Type III Refractor, change "GR05" at end of catalog number to "GR0". Ex. N2MVM2A150GR0-S828 1. Add voltage suffix to end of catalog number Standard Voltage Ballasts 60Hz NEC/UL CEC/CSA (cul) Voltage Multi Tap 120V 480V Tri Tap 120V Suffix /MT /120 /480 /TT /120 Optional Voltage Ballasts - 50 or 60Hz EXPORT Voltage 220V 60Hz 220V 50Hz 20V 50Hz 240V 50Hz Suffix /220 /220 50 /20 50 /240 50 2. Options - Add the required option suffixes, see page 960, in alpha-numeric order. L 962 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

N2MV Series 70 175W Metal Halide Non-metallic Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Cl. II, Groups F, G Cl. III & Simultaneous Presence (100W max) Marine & Wet Locations, R, 4, 4X; IP56 L To complete the catalog #, include information in notes 1, 2 and below. For guards and other optics see N2MV Series - Ordering By Components page. Mounting Style Hub Size Lamp Watts With G0 Globe and P Guard BASIC CATALOG NUMBER With GR05 Glass Refractor * Pendant Mount /4 70 N2MVM2A070GP N2MVM2A070GR05 1 N2MVMA070GP N2MVMA070GR05 /4 100 N2MVM2A100GP N2MVM2A100GR05 1 N2MVMA100GP N2MVMA100GR05 /4 175 N2MVM2A175GP N2MVM2A175GR05 1 N2MVMA175GP N2MVMA175GR05 Ceiling Mount Thru-Feed /4 70 N2MVM2C070GP N2MVM2C070GR05 1 N2MVMC070GP N2MVMC070GR05 /4 100 N2MVM2C100GP N2MVM2C100GR05 1 N2MVMC100GP N2MVMC100GR05 /4 175 N2MVM2C175GP N2MVM2C175GR05 1 N2MVMC175GP N2MVMC175GR05 Stanchion 1 1 /2 70 N2MVMJ070GP N2MVMJ070GR05 Mount 1 1 /2 100 N2MVMJ100GP N2MVMJ100GR05 25 Angle 1 1 /2 175 N2MVMJ175GP N2MVMJ175GR05 * For GR02 Type II Refractor, change "GR05" at end of catalog number to "GR02". Ex. N2MVM2A070GR02 For GR0 Type III Refractor, change "GR05" at end of catalog number to "GR0". Ex. N2MVM2A070GR0 1. Add voltage suffix to end of catalog number Standard Voltage Ballasts 60Hz NEC/UL CEC/CSA (cul) Voltage Multi Tap 120V 480V Tri Tap 120V Suffix /MT /120 /480 /TT /120 Optional Voltage Ballasts - 50 or 60Hz CEC/CSA (cul) - CWI Isolated Ballasts EXPORT Voltage 208V CWI 240V CWI 600V CWI 220V 60Hz 220V 50Hz 20V 50Hz 240V 50Hz Suffix /208CWI /240CWI /600CWI /220 /220 50 /20 50 /240 50 2. 70W ballast not available in 480V.. Options - Add the required option suffixes, see page 960, in alpha-numeric order. L www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 96

L N2MV Series Ordering by Components N2MV luminaires are available in components. A complete luminaire consists of: I. N2MV Cover (Mounting Module) II. N2MV Ballast Housing Include voltage and required option(s) III. Globe, Refractor, Guard, Reflector I. N2MV Cover (Mounting Module): Type Conduit Cat. # Pendant /4" N2APM2 1" N2APM Ceiling /4" N2CM2 1" N2CM Wall (Use wall bracket accessory with Ceiling Cover) /4" N2MV WM1 and N2CM2 1" N2MV WM1 and N2CM Stanchion 25 Degree Angle 1 1 /2" N2JM5 II. Ballast Housings: Complete catalog number must have the voltage suffix (MT shown) and any options suffixes. Lamp Lamp Type Watts Cat. # High Pressure Sodium 50 N2MVS050/MT 70 N2MVS070/MT 100 N2MVS100/MT 150 N2MVS150/MT LX Metal Halide 70 N2MVM070/MT 100 N2MVM100/MT 175 N2MVM175/MT L III. Globe, Refractors, Guards and Reflectors: Type Cat. # Globe G0 Globe Teflon Coated G0S808 Globe Guard P Reflector Dome RD79 Reflector Angle RA79 Refractor Type 2 GR02 Refractor Type GR0 Refractor Type 5 GR05 Refractor Guard P2 Large Plastic Refractor Type 2 PGR02 Large Plastic Refractor Type PGR0 Large Plastic Refractor Type 5 PGR05 964 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

N2MV Series Family Tree L Champ H.I.D Luminaires *Plastic refractors are non-hazardous areas only (50-100W Max.) L www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2012 Cooper Crouse-Hinds 965

L N2MV Series Temperature Performance Data Champ H.I.D Luminaires High Pressure Sodium 40 TA T4A T2C/T4A 75 50 55 TA 85 65 70 40 TA T4A T2C/T4A 75 55 TA 85 65 40 T2D T4A T2C/T4A 85 100 55 T2C 100 65 40 T2C 85 150 55 65 L Metal Halide 70 100 150 (S828) 175 (Includes S828) 40 TC T4 T2B/T4 75 55 TB 85 65 40 T2B T4 T2B/T4 85 55 T2B 65 40 T2 55 65 40 T2 55 65 966 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

N2MV Series Dimensions and Weights L Champ H.I.D. Luminaires Dimensions In Inches: Ceiling Mount Ceiling Mount Top View Pendant Mount L 25 Angle Stanchion Mount Net Luminaire Weights (lbs.): Luminaire Series Lamp Watts Luminaire with Globe, Guard (lbs.) Lamp Watts Luminaire with Globe, Guard (lbs.) N2VMS N2MVM 50 2 70 2 1 /16 100 24 1 /16 150 26 1 /8 70 21 100 21 1 /16 175 22 1 /4 250 24 Wall Arm Mount Type Lbs. Type Lbs. Add for mounting modules: Pendant 1 1 /4 Flexible Pendant 1 1 /2 Ceiling 2 /4 Wall 4 1 /2 Quad-Mount 1 /2 Angle Stanchion 1 /2 Straight Stanchion 4 1 /2 Add for reflectors: Dome 1 1 /4 0 Angle 1 /4 Deduct: 1 lb. for luminaire without P Guard. Add: 5 1 /2 lbs. for luminaire with GR05 refractor. www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 967

L N2MV Series Photometric Data Champ H.I.D Luminaires Lamp: 150W/E-2-1 /2 clear high pressure sodium (HPS) Total bare lamp lumens: 16000 All data provided is for high pressure sodium luminaires with 150W/E-2-1 /2 clear lamps. Use conversion factors (multipliers) shown below for other clear lamp types and wattages. Consult Cooper Crouse-Hinds for additional photometric data on any Champ series luminiares. Luminaire with Globe and Dome Reflector Multipliers (for use with candela curve only). Isofootcandle Chart: Luminaire with Globe and Dome Reflector Luminaire Series N2MVS Lamp Watts Conversion Factor 50 0.25 70 0.40 100 0.59 Luminaire spacing ratio: 1.90 L Coefficient of Utilization Effective Floor Cavity Reflectance 20% % Reflectance Room Cavity Ratio Eff. Ceil. Wall 1 2 4 5 50.759.64.551.476.418 80 0.719.582.480.400.40 10.68.50.424.42.28 50.740.627.58.465.406 70 0.70.570.471.94.4 10.669.52.418.8.280 50.70.595.512.442.88 50 0.672.548.455.81.24 10.645.506.408.2.276 50.669.567.488.422.70 0 0.646.528.49.68.14 10.622.492.99.25.270 50.640.541.466.40.54 10 0.619.508.424.56.05 10.600.479.89.18.265 0 0.582.459.70.299.247 % Reflectance Room Cavity Ratio Eff. Ceil. Wall 6 7 8 9 10 50.71.0.294.267.21 80 0.296.257.224.198.164 10.24.208.174.151.121 50.62.2.288.262.226 70 0.291.252.221.195.164 10.28.204.17.151.121 50.45.09.275.250.218 50 0.28.244.215.190.159 10.25.201.170.148.119 50.1.294.265.240.209 0 0.275.29.208.184.154 10.21.196.168.146.116 50.17.284.25.21.201 10 0.266.2.20.180.150 10.227.19.165.14.114 0 0.210.177.149.128.100 Isofootcandle Chart: Luminaire with Globe and 0 Angle Reflector Isofootcandle charts show illumination in footcandles on work plane 10 feet below light center. Multiply by factor shown to convert to other mounting heights. Height (Ft.) Factor Height (Ft.) Factor 8 1.56 16.91 12.694 20.250 14.510 968 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

NVMV Series 70-400W Ex-Protected Luminaire for IEC and ATEX Applications Champ H.I.D. Luminaires Ex nr II T...Gc Ex t IIIC T... C Db IP66 LCIE 09 ATEX 1002 LCIE 09 ATEX 008 L The Champ NVMV design is optimized for Zone 2 gas applications (with standard restricted breathing Ex nr protection), as well as Zone 21 dust applications. Applications: NVMV Ex-Protected Luminaires are suitable for applications in Zone 2/Zone 21/Zone 22: In manufacturing plants, refineries, chemical, petrochemical, and other industrial process facilities, waste or sewage treatment facilities, dockside and other heavy industrial applications In areas where combustible dusts or fibers may be present In areas where ignitable concentrations of flammable gases or vapors will be present In installations where moisture, dirt, dust, vibration, corrosion, and rough usage are problematic Features: One product offering for global applications. The Champ family has the required IEC and ATEX certifications to provide solutions for specification requirements around the world. Restricted breathing (Ex nr) protection is standard. This provides better T-ratings, as gases will not enter the lamp chamber and control gear housing. Provides an integrated ballast with thermal cut-off functionality incorporated into the control gear. In the event of abnormal temperatures or when the lamp approaches end of life, the cut-off functionality protects the ballast from overheating or burning out. Identical mounting cover for IEC and NEC applications - regardless of wattage, options, and accessories. Reduce inventory costs and provide greater flexibility for engineering designers, customers, and distributors. HPS lamps restrike in 10-0 seconds with the instant restrike option (IR) should lamp extinguish due to system voltage drop or momentary loss. Optional builtin cut-off feature will shut off the instant restrike to avoid continuous high energy pulsing when lamp is inoperative or nearing end of life. Available with the Champ Quick-Clip. Quick-Clip secures the housing to the cover, providing faster, easier, and safer luminaire installation. Certifications and Compliances: Application in Zone 2 area acc. IEC 60079-15 Marking to 94/9/EC: Ex II G Ex nr II T*...Gc EC - Type Examination: LCIE 09 ATEX 1002 Application in Zone 21 and 22 areas acc. IEC 61241-1 Marking to 94/9/EC: Ex II 2 D Ex t IIIC T...ºC(*) Db IP66 EC - Type Examination: LCIE 09 ATEX 008 General per both application Zone 2 and 21 Temperature ambient of use: -45ºC to +55ºC Electromagnetic compatibility: EN 61000-6-4 Degree of protection: acc. EN 60529 IP66 Standard Materials and Finishes: Ballast housing and mountings copper-free aluminum Exterior hardware stainless steel (type 04) Reflectors (dome and angle) Krydon fiberglass-reinforced polyester Globes heat and impact-resistant glass Guards copper-free aluminum and stainless steel (large housing - stainless steel only) Technical Specifications: Entry Termination Installation Lamp Holder Lamp Type Lamp Power Control Gear NVMV 70W - 250W (Small Housing) NVMV 250W - 400W (Large Housing) Up to 4 x M20, M25, M2, 1 /2" NPT and /4" NPT and 1" NPT cable entries (1 1 /2" NPT for stanchion only) Core 6mm 2 max. (standard); 6 x 6mm 2 for looping (available upon request) Ceiling Mount, Wall Mount, Stanchion Mount, Pendant Mount E27 or E40 HSE/HST (high pressure sodium lamp) and HIE (metal halide lamp) 70W, 100W, 150W, 250W, and 400W Integrated ballast, thermal cut-off functionality incorporated into control gear Access via restricted breathing lamp chamber Base up; up to 25 off vertical Re-lamping Burning Position Ingress Protection IP66 to EN 60529 Electrical Supply 220, 20, 240V 50Hz and 220, 20V 60Hz L www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 969

L NVMV Series 70-400W Ex-Protected Luminaire for IEC and ATEX Applications Champ H.I.D. Luminaires Ex nr II T...Gc Ex t IIIC T... C Db IP66 LCIE 09 ATEX 1002 LCIE 09 ATEX 008 Ordering Information: Example of Completed Part Number - Small Body: NVMVS1MC075POO NVMV S 1M C 07 5 P O O Series Lamp Entry Mounting* Wattage Voltage Guard Body NVMV Luminaire IEC Gear S = HSE/HST (HPS) C = Ceiling W = Wall J = Stanchion O = Small Body O = Standard M = HIE (MH) 1M = M20 2M = M25 M = M2 1N = 1 /2" NPT 2N = /4" NPT N = 1" NPT 5N = 1 1 /2" NPT (For Stanchion) 07 = 70W 10 = 100W 15 = 150W 25 = 250W = 220V / 50 Hz 5 = 20V / 50 Hz 6 = 240V / 50 Hz 4 = 220V / 60 Hz 7 = 20V / 60 Hz O = Without Guard G4 Globe P = G251 Globe with P22 Alum. Guard S = G251 Globe with P22 SS04 Guard L Example of Completed Part Number - Large Body: NVMVS1MC255PLO NVMV S 1M C 25 5 P L O Series Lamp Entry Mounting* Wattage Voltage Guard Body NVMV Luminaire IEC Gear S = HSE/HST (HPS) M = HIE (MH) C = Ceiling W = Wall J = Stanchion L = Large Body O = Standard 1M = M20 2M = M25 M = M2 1N = 1 /2" NPT 2N = /4" NPT N = 1" NPT 5N = 1 1 /2" NPT (For Stanchion) 25 = 250W 40 = 400W = 220V / 50 Hz 5 = 20V / 50 Hz 6 = 240V / 50 Hz 4 = 220V / 60 Hz 7 = 20V / 60 Hz O = Without Guard G0 Globe P = G0 Globe with P SS Guard Options and Accessories: Description Suffix Instant restrike (100W HPS and 150W HPS) (alternative solution to dual arc lamps) /IR Dome reflector - small housing /RD70 0 angle reflector - small housing /RA70 Dome reflector - large housing /RD79 0 angle reflector - large housing /RA79 Champ Quick-Clip /S890 *For pendant mounting, order ceiling mount with pendant bracket accessory - please consult factory. 970 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

NVMV Series Temperature Performance Data L Champ H.I.D. Luminaires Temperature Performance: Refer to temperature performance data tables (below) to select luminaire that is suitable for your area specifications. These numbers are the maximum surface temperature of the luminaire. Note: T - maximum surface temperature 200 C T4 - maximum surface temperature 15 C For example: atmospheres that contain gasoline and have an ignition temperature of 56 C, any fixture with the T-rating in this table can be used. Atmospheres that contain diethyl ether and have an ignition temperature of 160 C require a luminaire with T4 ratings. NVMV 70W - 250W (Small Housing) Catalog Number Example NVMVS1MC075*00 NVMVS1MC105*00 NVMVS1MC155*00 NVMVS1MC255*00 NVMVM1MC075*00 NVMVM1MC105*00 NVMVM1MC155*00 NVMVM1MC255*00 Watts 70W 100W 150W 250W 70W 100W 150W 250W Lamp Type HSE/HST (HPS) HIE (MH) Cat. No. - shown with M20 Ceiling Mount, /20V, 50 Hz. Rated Ambient C Lamp Holder With G4 Globe Only GAS (Class I, Zone 2) Ex nr II T...Gc With G251 Globe Only With G4 Globe and Reflector With G251 Globe and Reflector With G4 Globe Only DUST (Class II, Zone 21) Ex t IIIC T...Db With G251 Globe Only With G4 Globe and Reflector With G251 Globe and Reflector 40 T4 T4 T4 T4 99 C 109 C 104 C 109 C 50 E27 T4 T4 T4 T4 109 C 119 C 114 C 119 C 55 T4 T4 T4 T4 114 C 124 C 119 C 124 C 40 T4 T4 T4 T4 99 C 117 C 104 C 128 C 50 E40 T4 T4 T4 T 109 C 127 C 114 C 18 C 55 T4 T T4 T 114 C 12 C 119 C 14 C 40 T4 T T T 122 C 140 C 140 C 140 C 50 E40 T T T T 12 C 150 C 150 C 150 C 55 T T T T 17 C 155 C 155 C 155 C 40 T T T T2 168 C 174 C 189 C 218 C 50 E40 T T T2 T2 178 C 184 C 199 C 228 C 55 T T T2 T2 18 C 189 C 204 C 2 C 40 T4 T4 T4 T4 99 C 109 C 104 C 109 C 50 E27 T4 T4 T4 T4 109 C 119 C 114 C 119 C 55 T4 T4 T4 T4 114 C 124 C 119 C 124 C 40 T4 T4 T4 T4 99 C 117 C 104 C 128 C 50 E27 T4 T4 T4 T 109 C 127 C 114 C 18 C 55 T4 T T4 T 114 C 12 C 119 C 14 C 40 T4 T T T 122 C 140 C 140 C 140 C 50 E27 T T T T 12 C 150 C 150 C 150 C 55 T T T T 17 C 155 C 155 C 155 C 40 T T T T2 168 C 194 C 189 C 218 C 50 E40 T T2 T2 T2 178 C 204 C 199 C 228 C 55 T T2 T2 T2 18 C 209 C 204 C 2 C L NVMV 250W - 400W (Large Housing) Catalog Number Example NVMVS1MC255*L0 NVMVS1MC405*L0 NVMVM1MC255*L0 NVMVM1MC405*L0 Watts 250W 400W 250W 400W Lamp Type HSE/HST (HPS) HIE (MH) Rated Ambient C Lamp Holder GAS (Class I, Zone 2) Ex nr II T...Gc With G0 With G0 Globe Only Globe and Reflector DUST (Class II, Zone 21) Ex t IIIC T...Db With G0 With G0 Globe Only Globe and Reflector 40 T T 17 C 17 C 50 E40 T T 147 C 147 C 55 T T 152 C 152 C 40 T T 159 C 175 C 50 E40 T T 169 C 185 C 55 T T 174 C 190 C 40 T T 17 C 17 C 50 E40 T T 147 C 147 C 55 T T 152 C 152 C 40 T T 159 C 19 C 50 E40 T T2 169 C 20 C 55 T T2 174 C 208 C www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 971

L VMV Series 50 175W Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups E, F, G, Cl. III & Simultaneous Presence (HPS 50W, 70W) Marine & Wet Locations, R, 4, 4X; IP56 to IP66 L Applications: VMV series Champ luminaires are used: In manufacturing plants, refineries, chemical, petrochemical, and other industrial process facilities, waste or sewage treatment facilities, offshore, dockside, and harbor installations, and other heavy industrial applications In areas in which ignitible concentrations of flammable gases or vapors will be present only due to abnormal, unusual, or accidental conditions Where combustible dusts are present In marine applications where water spray and corrosive atmospheres are considerations In elevated ambient temperatures often found in industrial applications In installations where moisture, dirt, dust, vibration, corrosion, and rough usage are problems Wherever the damaging effects of water, wind, snow, sleet, hot sun, or any combination of these elements are found Features: Compact, lightweight design is ideal for medium and low mounting heights Cast copper-free aluminum construction (less than 0.4 of 1% copper) and epoxy powder finish provide excellent resistance to corrosion Seven mounting arrangements to suit any lighting layout pendant, flexible pendant, ceiling, wall bracket, angle stanchion, straight stanchion, and quad-mount Wide range of light sources and wattages to meet specifiers' needs: 50, 70, 100, and 150 watt high pressure sodium (HPS); 70, 100, 175 watt metal halide (MH and Pulse Start MH) Hinged ballast housing for ease of installation and maintenance Wide choice of photometric distributions. Glass globes, refractors and compact refractors available for all wattage luminaires; plastic refractors (for nonhazardous applications only) for 50 100 watt luminaires All luminaires are designed to perform in a 40 C ambient temperature. Selected luminaires are suitable for ambient temperatures up to 65 C Superior gasketing seals between the mounting module, housing, and optical assembly for optimum performance in wet and corrosive environments Hubs with an integral conduit stop and bushing to help prevent damage to field wiring during installation Low ambient capability to ( 40 C) Dome and 0 angle reflectors made of bright white Krydon material provide superior reflectivity, with twist-on feature requiring no tools or additional hardware. Will not chip, peel, dent, rust, or corrode Grounding wire for safety High power factor ballasts (Min P.F. 90%) and available in a variety of voltages to meet local area requirements Mogul base porcelain lamp socket Certifications and Compliances: NEC & CEC: Class I, Division 2, Groups A, B, C, D HPS 50W, 70W Class II, Class III & Simultaneous Presence (Class I, Division 2 and Class II) Class I, Zone 2 IEC: Zone 2 Ex nr IIC UL Standards: 844 Hazardous (Classified) Locations 1598 Luminaires 1598A Marine Locations CSA Standards: C22.2 No. 17 IEC Standards: 60079-15 Standard Materials: Ballast housings and mountings copper-free aluminum (less than 0.4 of 1%) Exterior hardware stainless steel Reflectors (dome and angle) Krydon fiberglass-reinforced polyester material Globes heat and impact resistant internally fluted glass housing only. Used with R2, R and R5 refractors... Stainless steel insert top hat with stainless steel threaded insert Refractors glass (50 175 watts); plastic to attach ballast housing... 50 100 watts), for non-hazardous TEFLON coating on globe for applications increased shatter protection... Guards: Globe copper-free aluminum Refractor stainless steel Standard Finishes: Copper-free aluminum epoxy powder coat Krydon material high reflectance white Stainless steel natural Electrical Ratings: 120, 208, 240, 277, 47, 480, 600, Multitap (120, 208, 240 and 277) 50 to 150W HPS; 70 to 175W MH Options: The following special options are available from the factory by adding suffix to luminaire Cat. No.: Description Suffix Factory Sealed Champs... S865 Class I, Division 2 & Zone 2 Provides T code without conduit or cable seals Restricted breathing/non-sparking Restricted Breathing Construction... S826 Class I, Division 2 & Zone 2 Suitabilty Cooler Operating Temperatures (T-Numbers) Certified for IEC Zone 2... S826TB Furnished with terminal block, crimp terminals and dedicated voltage ballasts (no MT, DT or TT) Fused to protect ballast and capacitors against abnormal line conditions... S658* (Not available with /MT Ballast) (Not for use in Canada) (Not suitable for marine applications) Quick-Clip - Holds weight of housing when closed. No need to support luminaire while screwing the housing to the cover... S890 Ballast-Gard starter cut-out switch prevents starter pulsing when lamp is cycling or inoperative; prolongs ballast and ignitor life. Available for use with 50 150W LX HPS only... BG Instant restrike enables a hot HPS lamp to immediately restrike after a momentary loss arc due to voltage fluctuation or power outage. It has no effect on the warm-up period of cold lamps. Available for use with 50 150W LX HPS only... IR Quartz auxiliary lighting comes to full brightness immediately and remains lit until the HID lamp attains 60 70% of full illumination. For nonhazardous locations only. Must use R2, R and R5 refractors... QTZ Refractor Mount - For ballast G24 only. T-Numbers not affected Factory assembled with H.I.D. lamps installed for additional labor savings... Note: BG and IR options cannot be used together. IR and QTZ options cannot be used together. Accessories: See pages 977 978 for complete listing. TEFLON is a registered trademark of E.I. dupont Co. *When ordering fuses for luminaires, option S658, you must specify the operating voltage. S658 cannot be ordered with /MT in the catalog number. RM S806 S808 FA 924 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

VMV Series 50 150W High Pressure Sodium Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups E, F, G, Cl. III & Simultaneous Presence (50W, 70W) Marine & Wet Locations, R, 4, 4X; IP66 L To complete the catalog #, include information in notes 1, 2 and below. For guards and other optics see VMV Series - Ordering By Components page. BASIC CATALOG NUMBER Mounting Style Hub Size Lamp Watts With G24 Globe and P21 Guard With G241 Type I Compact Refractor * With R5 Glass Refractor Pendant Mount /4 50 VMVS2A050GP VMVS2A050G241 VMVS2A050R5 1 VMVSA050GP VMVSA050G241 VMVSA050R5 /4 70 VMVS2A070GP VMVS2A070G241 VMVS2A070R5 1 VMVSA070GP VMVSA070G241 VMVSA070R5 /4 100 VMVS2A100GP VMVS2A100G241 VMVS2A100R5 1 VMVSA100GP VMVSA100G241 VMVSA100R5 /4 150 VMVS2A150GP VMVS2A150G241 VMVS2A150R5 1 VMVSA150GP VMVSA150G241 VMVSA150R5 Flexible Pendant Mount /4 50 VMVS2HA050GP VMVS2HA050G241 VMVS2HA050R5 /4 70 VMVS2HA070GP VMVS2HA070G241 VMVS2HA070R5 /4 100 VMVS2HA100GP VMVS2HA100G241 VMVS2HA100R5 /4 150 VMVS2HA150GP VMVS2HA150G241 VMVS2HA150R5 Ceiling Mount Thru-Feed Wall Mount Thru-Feed Quad-Mount Pendant, Adjustable, Thru-Feed, 25º Angle, 12½º Angle /4 50 VMVS2C050GP VMVS2C050G241 VMVS2C050R5 1 VMVSC050GP VMVSC050G241 VMVSC050R5 /4 70 VMVS2C070GP VMVS2C070G241 VMVS2C070R5 1 VMVSC070GP VMVSC070G241 VMVSC070R5 /4 100 VMVS2C100GP VMVS2C100G241 VMVS2C100R5 1 VMVSC100GP VMVSC100G241 VMVSC100R5 /4 150 VMVS2C150GP VMVS2C150G241 VMVS2C150R5 1 VMVSC150GP VMVSC150G241 VMVSC150R5 /4 50 VMVS2TW050GP VMVS2TW050G241 VMVS2TW050R5 1 VMVSTW050GP VMVSTW050G241 VMVSTW050R5 /4 70 VMVS2TW070GP VMVS2TW070G241 VMVS2TW070R5 1 VMVSTW070GP VMVSTW070G241 VMVSTW070R5 /4 100 VMVS2TW100GP VMVS2TW100G241 VMVS2TW100R5 1 VMVSTW100GP VMVSTW100G241 VMVSTW100R5 /4 150 VMVS2TW150GP VMVS2TW150G241 VMVS2TW150R5 1 VMVSTW150GP VMVSTW150G241 VMVSTW150R5 /4 50 VMVS25Q050GP VMVS25Q050G241 VMVS25Q050R5 /4 70 VMVS25Q070GP VMVS25Q070G241 VMVS25Q070R5 /4 100 VMVS25Q100GP VMVS25Q100G241 VMVS25Q100R5 /4 150 VMVS25Q150GP VMVS25Q150G241 VMVS25Q150R5 L Stanchion 1 1 /2 50 VMVSJ050GP VMVSJ050G241 VMVSJ050R5 Mount 1 1 /2 70 VMVSJ070GP VMVSJ070G241 VMVSJ070R5 25 Angle 1 1 /2 100 VMVSJ100GP VMVSJ100G241 VMVSJ100R5 1 1 /2 150 VMVSJ150GP VMVSJ150G241 VMVSJ150R5 Stanchion 1 1 /2 50 VMVSP050GP VMVSP050G241 VMVSP050R5 Mount 1 1 /2 70 VMVSP070GP VMVSP070G241 VMVSP070R5 Straight 1 1 /2 100 VMVSP100GP VMVSP100G241 VMVSP100R5 1 1 /2 150 VMVSP150GP VMVSP150G241 VMVSP150R5 * For G24 Type III Compact Refractor, change "241" at end of catalog number to "24". Ex. VMVS2A050G24 For G245 Type V Compact Refractor, change "241" at end of catalog number to "245". Ex. VMVS2A050G245 For R2 Glass Refractor, change "R5" at end of catalog number to "R2". Ex. VMVS2A050R2. For R Glass Refractor, change "R5" at end of catalog number to "R". Ex. VMVS2A050R. 1. Add voltage suffix to end of catalog number Standard Voltage Ballasts 60Hz NEC/UL CEC/CSA (cul) Voltage Multi Tap Dual Tap 120V 480V Tri Tap Dual Tap 120V Suffix /MT /DT /120 /480 /TT /DT /120 Multi Tap and Dual Tap ballasts are powered for 277V Optional Voltage Ballasts - 50 or 60Hz CEC/CSA (cul) - CWI Isolated Ballasts EXPORT Voltage 208V CWI 240V CWI 480V CWI 600V CWI 220V 60Hz 220V 50Hz 240V 50Hz Suffix /208CWI /240CWI /480CWI /600CWI /220 /220 50 /240 50 2. 150W HPS Luminaires: For 55V lamps - add suffix LX; for 100V lamps - add suffix CE. 50W HPS luminaire is dual tap only.. Options - Add the required option suffixes, see page 924, in alpha-numeric order. www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 925

L VMV Series 150 175W Pulse Start Metal Halide Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Marine & Wet Locations, R, 4, 4X; IP66 To complete the catalog #, include information in note 1 below. For guards and other optics see VMV Series - Ordering By Components page. Mounting Style Hub Size Lamp Watts With G24 Globe and P21 Guard BASIC CATALOG NUMBER With G245 Type V With R5 Glass Compact Refractor * Refractor Pendant Mount /4 150 VMVM2A150GP S828 VMVM2A150G245 S828 VMVM2A150R5 S828 1 VMVMA150GP S828 VMVMA150G245 S828 VMVMA150R5 S828 /4 175 VMVM2A175GP S828 VMVM2A175G245 S828 VMVM2A175R5 S828 1 VMVMA175GP S828 VMVMA175G245 S828 VMVMA175R5 S828 Flexible Pendant Mount /4 150 VMVM2HA150GP S828 VMVM2HA150G245 S828 VMVM2HA150R5 S828 /4 175 VMVM2HA175GP S828 VMVM2HA175G245 S828 VMVM2HA175R5 S828 Ceiling Mount Thru-Feed /4 150 VMVM2C150GP S828 VMVM2C150G245 S828 VMVM2C150R5 S828 1 VMVMC150GP S828 VMVMC150G245 S828 VMVMC150R5 S828 /4 175 VMVM2C175GP S828 VMVM2C175G245 S828 VMVM2C175R5 S828 1 VMVMC175GP S828 VMVMC175G245 S828 VMVMC175R5 S828 Wall Mount Thru-Feed /4 150 VMVM2TW150GP S828 VMVM2TW150G245 S828 VMVM2TW150R5 S828 1 VMVMTW150GP S828 VMVMTW150G245 S828 VMVMTW150R5 S828 /4 175 VMVM2TW175GP S828 VMVM2TW175G245 S828 VMVM2TW175R5 S828 1 VMVMTW175GP S828 VMVMTW175G245 S828 VMVMTW175R5 S828 L Quad-Mount /4 150 VMVM25Q150GP S828 VMVM25Q150G245 S828 VMVM25Q150R5 S828 Pendant, Adjustable Thru- Feed, 25 Angle, 12 1 /2 Angle /4 175 VMVM25Q175GP S828 VMVM25Q175G245 S828 VMVM25Q175R5 S828 Stanchion Mount 25 Angle 1 1 /2 150 VMVMJ150GP S828 VMVMJ150G245 S828 VMVMJ150R5 S828 1 1 /2 175 VMVMJ175GP S828 VMVMJ175G245 S828 VMVMJ175R5 S828 Stanchion Mount Straight 1 1 /2 150 VMVMP150GP S828 VMVMP150G245 S828 VMVMP150R5 S828 1 1 /2 175 VMVMP175GP S828 VMVMP175G245 S828 VMVMP175R5 S828 * For G241 Type I Compact Refractor, change "245" at end of catalog number to "241". Ex. VMVM2A150G241-S828 For G24 Type III Compact Refractor, change "245" at end of catalog number to "24". Ex. VMVM2A150G24-S828 For R2 Glass Refractor, change "R5" at end of catalog number to "R2". Ex. VMVM2A150R2-S828. For R Glass Refractor, change "R5" at end of catalog number to "R". Ex. VMVM2A150R-S828. 1. Add voltage suffix to end of catalog number Standard Voltage Ballasts 60Hz NEC/UL CEC/CSA (cul) Voltage Multi Tap 120V 480V Tri Tap 120V Suffix /MT /120 /480 /TT /120 Optional Voltage Ballasts - 50 or 60Hz EXPORT Voltage 220V 60Hz 220V 50Hz 20V 50Hz 240V 50Hz Suffix /220 /220 50 /20 50 /240 50 926 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

VMV Series 70 175W Metal Halide Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Marine & Wet Locations, R, 4, 4X; IP66 L To complete the catalog #, include information in notes 1, 2 and below. For guards and other optics see VMV Series - Ordering By Components page. Mounting Style Hub Size Lamp Watts With G24 Globe and P21 Guard BASIC CATALOG NUMBER With G241 Type I With R5 Glass Compact Refractor * Refractor Pendant Mount /4 70 VMVM2A070GP VMVM2A070G241 VMVM2A070R5 1 VMVMA070GP VMVMA070G241 VMVMA070R5 /4 100 VMVM2A100GP VMVM2A100G241 VMVM2A100R5 1 VMVMA100GP VMVMA100G241 VMVMA100R5 /4 175 VMVM2A175GP VMVM2A175G241 VMVM2A175R5 1 VMVMA175GP VMVMA175G241 VMVMA175R5 Flexible Pendant Mount /4 70 VMVM2HA070GP VMVM2HA070G241 VMVM2HA070R5 /4 100 VMVM2HA100GP VMVM2HA100G241 VMVM2HA100R5 /4 175 VMVM2HA175GP VMVM2HA175G241 VMVM2HA175R5 Ceiling Mount Thru-Feed /4 70 VMVM2C070GP VMVM2C070G241 VMVM2C070R5 1 VMVMC070GP VMVMC070G241 VMVMC070R5 /4 100 VMVM2C100GP VMVM2C100G241 VMVM2C100R5 1 VMVMC100GP VMVMC100G241 VMVMC100R5 /4 175 VMVM2C175GP VMVM2C175G241 VMVM2C175R5 1 VMVMC175GP VMVMC175G241 VMVMC175R5 Wall Mount Thru-Feed /4 70 VMVM2TW070GP VMVM2TW070G241 VMVM2TW070R5 1 VMVMTW070GP VMVMTW070G241 VMVMTW070R5 /4 100 VMVM2TW100GP VMVM2TW100G241 VMVM2TW100R5 1 VMVMTW100GP VMVMTW100G241 VMVMTW100R5 /4 175 VMVM2TW175GP VMVM2TW175G241 VMVM2TW175R5 1 VMVMTW175GP VMVMTW175G241 VMVMTW175R5 Quad-Mount /4 70 VMVM25Q070GP VMVM25Q070G241 VMVM25Q070R5 /4 Pendant, 100 VMVM25Q100GP VMVM25Q100G241 VMVM25Q100R5 /4 Adjustable 175 VMVM25Q175GP VMVM25Q175G241 VMVM25Q175R5 Thru-Feed, 25 Angle, 12 1 /2 Angle L Stanchion 1 1 /2 70 VMVMJ070GP VMVMJ070G241 VMVMJ070R5 Mount 1 1 /2 100 VMVMJ100GP VMVMJ100G241 VMVMJ100R5 25 Angle 1 1 /2 175 VMVMJ175GP VMVMJ175G241 VMVMJ175R5 Stanchion 1 1 /2 70 VMVMP070GP VMVMP070G241 VMVMP070R5 Mount 1 1 /2 100 VMVMP100GP VMVMP100G241 VMVMP100R5 Straight 1 1 /2 175 VMVMP175GP VMVMP175G241 VMVMP175R5 * For G24 Type III Compact Refractor, change "241" at end of catalog number to "24". Ex. VMVM2A070G24 For G245 Type V Compact Refractor, change "241" at end of catalog number to "245". Ex. VMVM2A070G245 For R2 Glass Refractor, change "R5" at end of catalog number to "R2". Ex. VMVM2A070R2. For R Glass Refractor, change "R5" at end of catalog number to "R". Ex. VMVM2A070R. 1. Add voltage suffix to end of catalog number Standard Voltage Ballasts 60Hz NEC/UL CEC/CSA (cul) Voltage Multi Tap 120V 480V Tri Tap 120V Suffix /MT /120 /480 /TT /120 2. 70W ballast not available in 480V.. Options - Add the required option suffixes, see page 924, in alpha-numeric order. Optional Voltage Ballasts - 50 or 60Hz CEC/CSA (cul) - CWI Isolated Ballasts EXPORT Voltage 208V CWI 480V CWI 600V CWI 220V 60Hz 220V 50Hz 20V 50Hz 240V 50Hz Suffix /208CWI /240CWI /600CWI /220 /220 50 /20 50 /240 50 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 927

L VMV Series Ordering by Components VMV luminaires are available in components. A complete luminaire consists of: I. Champ Cover (Mounting Module) II. VMV Ballast Housing Include voltage and required option(s) III. Optical & Guard components Globe, Reflector, Refractor, Guard I. Champ Cover (Mounting Module): Type Conduit Cat. # Pendant /4" APM2 1" APM Flexible Pendant /4" HPM2 Ceiling /4" CM2 1" CM Wall /4" TWM2 1" TWM Stanchion 25 Degree Angle 1 1 /2" JM5 Stanchion Straight 1 1 /2" PM5 Quad-Mount /4" QM25 II. Ballast Housings: Complete catalog number must have the voltage suffix (MT shown) and any options suffixes. Lamp Type High Pressure Sodium Metal Halide Lamp Watts Cat. # For Globe and Compact Refractor Cat. # For Large Refractor 50 VMVS050/DT VMVS050/MT RM 70 VMVS070/MT VMVS070/MT RM 100 VMVS100/MT VMVS100/MT RM 150 VMVS150/MT LX VMVS150/MT LX RM 70 VMVM070/MT VMVM070/TT RM 100 VMVM100/MT VMVM100/MT RM 175 VMVM175/MT VMVM175/MT RM L III. Globe, Reflectors, Refractors, Guards: Type Cat. # Globe Globe Teflon Coated Globe Guard Reflector Dome Reflector Angle Compact Refractor Type 1 Compact Refractor Type Compact Refractor Type 5 Compact Refractor Guard Large Refractor Type 2 Large Refractor Type Large Refractor Type 5 Large Refractor Guard Large Plastic Refractor Type 2 Large Plastic Refractor Type Large Plastic Refractor Type 5 G24 G24 S808 P21 RD70 RA70 G241 G24 G245 P241 R2 R R5 P2 PR2 PR PR5 928 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

VMV Series Family Tree L Champ H.I.D. Luminaires L *Plastic refractors are for non-hazardous areas only (50 100W Max.) www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 929

L VMV Series Champ H.I.D. Luminaires Temperature Performance Data Lamp Cat. # Wattage Type Rated Ambient C Class I, Division 2 Globe (G24, G241, G245) Globe (G24) w/ Reflector (RA70 or RD70) Refractor (R2, R, or R5) Group Class II, Division 1 Class I, Zone 2 Globe (G24) w/ or w/o Reflector (RA70 or RD70) Simultaneous Presence Class I, Div. 2 Class II, Div. 2 Restricted Breathing Suffix S826 w/ Globe (G24, G241, G245) Factory Sealed Suffix S865 AEx na nr II Supply Wire Suitable For C Globe (G24, G241, G245) Refractor (R2, R, or R5) VMVM70 70 MH 40 TA TA TA T5 T 90 90 VMVM70 70 MH 55 T T T T4 T 90 90 VMVM70 70 MH 65 T T T T4 T 90 90 VMVM100 100 MH 40 T2D T2D T2D T4 T 90 90 VMVM100 S849 100 MH 40 T2 T2 T2 T4 T 75 75 VMVM100 100 MH 55 T2D T2D T2D T4 T 90 90 VMVM150 150 MH 40 T2A T2A T2B T T 90 90 VMVM175 175 MH 40 T2A T2A T2B T T 90 90 VMVS50 50 HPS 40 TA TA TB EFG T4A TA T5 T 75 65 VMVS50 50 HPS 55 TA TA TA EFG T4 T T5 T 75 75 VMVS50 50 HPS 65 T T T EFG T4 T2D T5 T 75 75 VMVS70 70 HPS 40 T T TB EFG TC T2C T4 T 75 65 VMVS70 70 HPS 55 T T T EFG TC T2B T4 T 90 90 VMVS100 100 HPS 40 T2C T2C T2D EFG TA T2A T4 T 90 75 VMVS100 100 HPS 55 T2B T2B T2C EFG T T 105 90 VMVS150 150 HPS 40 T2A T2A T2B T T 90 85 VMVS150 150 HPS 55 T2 T2 T2A T T 105 105 VMVIG055 55 Induction 40 T2C T2C T6 65 VMVIG055 55 Induction 55 T2C T2C T5 65 The Class I, Division 2 T-codes apply to luminaires without the restricted breathing (S826) or factory sealed (S865) options. These luminaires are listed to UL 844. UL844 specifies how the temperatures are measured. The Class I, Zone 2 T-codes are for luminaires that are additionally listed to UL 60079-15 that specify a different method for measuring temperatures. Since NEC 501.1 states that equipment " for use in Class I, Zone 0, 1, or 2 locations shall be permitted in Class I, Division 2 locations " then these luminaires are suitable for Class I, Division 2 but with cooler temperature ratings. They also have the advantage of meeting the more rigorous mechanical tests of UL 844. L 90 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2012 Cooper Crouse-Hinds

VMV Series Champ H.I.D. Luminaires Dimensions and Weights L Dimensions In Inches: Pendant Mount Quad-Mount Ceiling Mount Top View Ceiling Mount Net Luminaire Weights: Lamp Watts Luminaire Series 50 70 100 150 175 Luminaire with Globe, Guards (lbs.): VMVS 1 1 /2 14 1 /2 14 1 /2 14 1 /2 VMVM 1 1 1 /4 15 1 /2 Luminaire with Glass Refractor (lbs.): VMVS 21 /4 22 /4 22 /4 22 /4 VMVM 21 21 1 /2 2 /4 Type Lbs. Type Lbs. Add for mounting modules: Pendant 1 1 /4 Quad-Mount 1 /2 Flexible Pendant 1 1 /2 Angle Stanchion 1 /2 Ceiling 2 /4 Straight Stanchion 4 1 /2 Wall 4 1 /2 Add for reflectors: Dome 1 1 /2 0 Angle 1 1 /2 Deduct: 1 /2" lb. for fixture without P21 Guard 25 Angle Stanchion Mount Straight Stanchion Mount Wall Mount L Luminaire With: Refractors, Guard Compact Refractor Globe, Guard, Reflectors www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 91

L VMV Series Photometric Data Champ H.I.D. Luminaires Lamp: 100W/E 2 1 /2 high pressure sodium (HPS) Total bare lamp lumens: 9500 NOTE: All data provided is for high pressure sodium luminaires with 100W/E 2-1 /2 clear lamps. Use conversion factors (multipliers) shown below for other clear lamp types and wattages. Consult Cooper Crouse-Hinds for additional photometric data on any Champ Series luminaire. Luminaire with Globe and Dome Reflector Multipliers (for use with candela curve only). Luminaire Series VMVS Lamp Watts Conversion Factor 50 0.42 70 0.67 150 1.68 Isofootcandle Chart: Luminaire with Globe and Dome Reflector Luminaire spacing ratio: 1.85 L Coefficient of Utilization Effective Floor Cavity Reflectance 20% % Reflectance Room Cavity Ratio Eff. Ceil. Wall 1 2 4 5 50.82.707.610.529.464 80 0.784.646.58.451.84 10.749.594.482.91.24 50.804.690.597.517.452 70 0.767.6.50.445.77 10.74.587.477.88.21 50.765.658.571.494.44 50 0.75.611.51.41.68 10.709.569.466.81.18 50.71.629.546.47.416 0 0.708.591.497.419.57 10.685.555.456.75.12 50.701.60.524.454.99 10 0.681.569.482.406.48 10.662.541.446.67.07 0 0.644.521.427.48.288 % Reflectance Room Cavity Ratio Eff. Ceil. Wall 6 7 8 9 10 50.412.66.26.296.258 80 0.4.290.25.224.187 10.278.29.201.175.142 50.40.59.20.291.252 70 0.29.285.250.221.187 10.274.25.200.174.142 50.86.44.07.279.244 50 0.20.277.244.216.182 10.271.21.197.172.140 50.71.29.296.269.25 0 0.12.272.27.210.178 10.267.227.195.170.17 50.57.19.285.260.227 10 0.04.266.22.206.17 10.26.224.192.167.15 0 0.245.207.176.152.120 Isofootcandle Chart: Luminaire with Globe and 0 Angle Reflector Isofootcandle charts show illumination in footcandles on work plane 10 feet below light center. Multiply by factor shown to convert to other mounting heights. Height (Ft.) Factor Height (Ft.) Factor 6 2.78 14 0.51 8 1.56 16 0.9 12 0.70 92 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

VMV Series Photometric Data L Champ H.I.D. Luminaires Lamp: 100W/E0 2 1 /2 high pressure sodium (HPS) Luminaire with I.E.S. Type V Glass Refractor NOTE: Photometric data was developed using a 100 watt clear high pressure sodium lamp (9500 lumens). For other clear lamps, use the following conversion factors (multipliers): Luminaire Series Lamp Watts Conversion Factor 50 0.42 VMVS 70 0.67 150 1.68 Luminaire spacing ratio: 2.0 Coefficient of Utilization Effective Floor Cavity Reflectance 20% % Reflectance Room Cavity Ratio Eff. Ceil. Wall 1 2 4 5 50.848.709.597.508.47 80 0.796.61.509.414.4 10.750.566.49.41.271 50.818.682.576.489.419 70 0.770.611.49.402.1 10.726.552.428.4.264 50.759.62.5.451.89 50 0.720.574.464.77.12 10.685.521.407.18.25 50.706.586.49.417.59 0 0.675.58.45.54.291 10.645.495.86.02.240 50.658.544.457.85.1 10 0.62.504.408.1.274 10.608.469.66.286.227 0 0.581.441.40.260.20 % Reflectance Room Cavity Ratio Eff. Ceil. Wall 6 7 8 9 10 50.84.7.299.272.28 80 0.292.249.214.189.159 10.226.189.154.12.10 50.69.25.288.262.229 70 0.28.240.20.18.156 10.218.182.150.10.105 50.41.01.266.24.214 50 0.266.225.195.17.146 10.209.17.14.124.099 50.16.277.248.225.198 0 0.249.21.182.161.16 10.199.16.16.117.09 50.292.258.22.209.14 10 0.2.200.171.151.127 10.188.154.128.110.087 0 0.165.1.108.091.070 L www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 9

VMV High Wattage Series 200-400W For Medium and High Mounting Heights Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups E, F, G; Cl. III & Simultaneous Presence (with Glass Refractor) Marine (with Globe or Glass Refractor) & Wet Locations, R, 4, 4X; IP66 L Applications: VMV high wattage series Champ luminaires are used: In manufacturing plants, refineries, chemical, petrochemical, and other industrial process facilities, waste or sewage treatment facilities, and other heavy industrial applications In applications involving medium and high mounting heights In applications where energy-efficient, high lumen output is required In areas in which ignitible concentrations of flammable gases or vapors will be present only due to abnormal, unusual, or accidental conditions In marine applications where water spray and corrosive atmospheres are considerations In elevated ambient temperatures often found in industrial applications In installations where moisture, dirt, dust, vibration, corrosion and rough usage are problems Wherever the damaging effects of water, wind, snow, sleet, hot sun, or any combination of these elements, are problems Features: Cast copper-free aluminum construction (less than 0.4 of 1% copper) and epoxy powder finish provide excellent resistance to corrosion Six mounting arrangements to suit any lighting layout pendant, ceiling, wall bracket, angle stanchion, straight stanchion and quad-mount Wide range of light sources and wattages to meet specifiers' needs: 200, 250, 400 watt high pressure sodium (HPS); 250 and 400 watt metal halide (MH) and pulse start metal halide Hinged ballast housing for ease of installation and maintenance Wide choice of photometric distributions. Glass globes, glass refractors, and reflector/lens are available All luminaires designed to perform in a 40 C ambient temperature. Selected luminaires are suitable for ambient temperatures up to 65 C Superior gasketing seals between the mounting module, housing, and optical assembly for optimum performance in wet and corrosive environments Hubs with integral conduit stop and bushing to help prevent damage to field wiring during installation Low ambient capability to ( 40 C) Dome and 0 angle reflectors made of bright white Krydon material and etched Alzak high bay reflectors provide superior reflectivity Grounding wire for safety High power factor ballasts (Min. P. F. 90%) are available in a variety of voltages to meet local area requirements Mogul base lamp socket Certifications and Compliances: NEC/CEC: Class I, Division 2, Groups A, B, C, D With Glass Refractor - Class II, Class III & Simultaneous Presence (Class I, Division 2 and Class II) Class I, Zone 2 IEC: Zone 2 Ex nr IIC UL Standards: 844 Hazardous (Classified) Locations 1598 Luminaires 1598A Marine Locations CSA Standards: C22.2 No. 17 IEC Standards: 60079-15 Standard Materials: Ballast housings and mountings copper-free aluminum (less than 0.4 of 1%) Exterior hardware and guards stainless steel Reflectors (dome and angle) Krydon fiberglass-reinforced polyester material Globes heat and impact resistant internally fluted glass Refractors glass Reflector lens spun Alzak aluminum, tempered glass, stainless steel door frame Standard Finishes: Copper-free aluminum epoxy powder coat Alzak aluminum natural Stainless steel natural Krydon material high reflectance white Options: The following special options are available from the factory by adding suffix to luminaire Cat. No.: Description Suffix Restricted Breathing Construction... S826 Class I, Division 2 & Zone 2 Suitability Cooler Operating Temeratures (T-Numbers) Certified for IEC Zone 2... S826TB Furnished with terminal block crimp terminals and dedicated voltage ballasts (no MT, DT, or TT) Fused to protect ballast and capacitors against abnormal line conditions (Not available with /MT ballast) (Not suitable for marine applications)... S658 * Quick-Clip - Holds weight of housing when closed. No need to support luminaire while screwing the housing to the cover... S890 Quartz auxilliary lighting comes to full brightness immediately and remains lit until the HID lamp attains 60 70% of full illumination. For non-hazardous locations only... QTZ Ballast-Gard starter cutout switch prevents starter pulsing when lamp is cycling or inoperative; prolongs ballast and ignitor life. Available for use with 200 400W HPS only... BG Factory assembled with H.I.D. lamps installed for additional labor savings... Top hat with stainless steel threaded insert to attach ballast housing... Note: (Quartz lamp not included use 100W single ended lamp Q100DC, Q100CL/DC, or 100Q/CL/DC). Consult factory for top-hat limitations. Electrical Ratings: 120 to 600 volts and multi-tap 200, 250, 400W HPS and MH Accessories: See pages 977 978 for complete listing. Alzak is a registered trademark of ALCOA. *When ordering fuses for luminaires, option S658, you must specify the operating voltage. S658 cannot be ordered with /MT in the catalog number. Not for use in Canada. Suffix S826 and S826TB cannot be used with GRD4 Reflector/Lens. FA S806 L www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 951

L VMV High Wattage Series 200-400W High Pressure Sodium For Medium and High Mounting Heights Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups E, F, G; Cl. III & Simultaneous Presence (with Glass Refractor) Marine (with Globe or Glass Refractor) & Wet Locations, R, 4, 4X; IP56 to IP66 To complete the catalog #, include information in notes 1 and 2 below. For guards and other optics see VMV High Wattage Series - Ordering By Components page. BASIC CATALOG NUMBER Mounting Style Pendant Mount (Rigid or Flexible) Hub Size Lamp Watts With G0 Globe and P Guard With GR05 Glass Refractor * With GRD4 Reflector/Lens /4 200 VMVS2A200GP VMVS2A200GR05 VMVS2A200GRD4 1 VMVSA200GP VMVSA200GR05 VMVSA200GRD4 /4 250 VMVS2A250GP VMVS2A250GR05 VMVS2A250GRD4 1 VMVSA250GP VMVSA250GR05 VMVSA250GRD4 /4 400 VMVS2A400GP VMVS2A400GR05 VMVS2A400GRD4 1 VMVSA400GP VMVSA400GR05 VMVSA400GRD4 Ceiling Mount Thru-Feed /4 200 VMVS2C200GP VMVS2C200GR05 VMVS2C200GRD4 1 VMVSC200GP VMVSC200GR05 VMVSC200GRD4 /4 250 VMVS2C250GP VMVS2C250GR05 VMVS2C250GRD4 1 VMVSC250GP VMVSC250GR05 VMVSC250GRD4 /4 400 VMVS2C400GP VMVS2C400GR05 VMVS2C400GRD4 1 VMVSC400GP VMVSC400GR05 VMVSC400GRD4 Wall Mount Thru-Feed /4 200 VMVS2TW200GP VMVS2TW200GR05 1 VMVSTW200GP VMVSTW200GR05 /4 250 VMVS2TW250GP VMVS2TW250GR05 1 VMVSTW250GP VMVSTW250GR05 /4 400 VMVS2TW400GP VMVS2TW400GR05 1 VMVSTW400GP VMVSTW400GR05 Quad-Mount /4 200 VMVS25Q200GP VMVS25Q200GR05 VMVS25Q200GRD4 Pendant, Adjustable /4 250 VMVS25Q250GP VMVS25Q250GR05 VMVS25Q250GRD4 Thru-Feed, 25 Angle, 12 1 /2 Angle /4 400 VMVS25Q400GP VMVS25Q400GR05 VMVS25Q400GRD4 Stanchion Mount 1 1 /2 200 VMVSJ200GP VMVSJ200GR05 VMVSJ200GRD4 25 Angle 1 1 /2 250 VMVSJ250GP VMVSJ250GR05 VMVSJ250GRD4 1 1 /2 400 VMVSJ400GP VMVSJ400GR05 VMVSJ400GRD4 L Stanchion Mount 1 1 /2 200 VMVSP200GP VMVSP200GR05 Straight 1 1 /2 250 VMVSP250GP VMVSP250GR05 1 1 /2 400 VMVSP400GP VMVSP400GR05 * For GR02 Type II Refractor, change "GR05" at end of catalog number to "GR02". Ex. VMVS2A200GR02 For GR0 Type III Refractor, change "GR05" at end of catalog number to "GR0". Ex. VMVS2A200GR0 1. Add voltage suffix to end of catalog number Standard Voltage Ballasts 60Hz NEC/UL CEC/CSA (cul) Voltage Multi Tap 120V 480V Tri Tap 120V Suffix /MT /120 /480 /TT /120 Optional Voltage Ballasts - 50 or 60Hz CEC/CSA (cul) - CWI Isolated Ballasts EXPORT Voltage 208V CWI 240V CWI 480V CWI 600V CWI 220V 60Hz 220V 50Hz 20V 50Hz 240V 50Hz Suffix /208CWI /240CWI /480CWI /600CWI /220 /220 50 /20 50 /240 50 2. Options - Add the required option suffixes, see page 951, in alpha-numeric order. 952 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

VMV High Wattage Series 250-400W Pulse Start Metal Halide For Medium and High Mounting Heights Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups E, F, G; Cl. III & Simultaneous Presence (with Glass Refractor) Marine (with Globe or Glass Refractor) & Wet Locations, R, 4, 4X; IP56 to IP66 L To complete the catalog #, include information in notes 1 and 2 below. For guards and other optics see VMV High Wattage Series - Ordering By Components page. Mounting Style Pendant Mount (Rigid or Flexible) Hub Size Lamp Watts With G0 Globe and P Guard BASIC CATALOG NUMBER With GR05 Glass Refractor * With GRD4 Reflector/Lens /4 250 VMVM2A250GP S828 VMVM2A250GR05 S828 VMVM2A250GRD4 S828 1 VMVMA250GP S828 VMVMA250GR05 S828 VMVMA250GRD4 S828 /4 20 VMVM2A20GP S828 VMVM2A20GR05 S828 VMVM2A20GRD4 S828 1 VMVMA20GP S828 VMVMA20GR05 S828 VMVMA20GRD4 S828 /4 400** VMVM2A400GP S828 VMVM2A400GR05 S828 VMVM2A400GRD4 S828 1 VMVMA400GP S828 VMVMA400GR05 S828 VMVMA400GRD4 S828 Ceiling Mount Thru-Feed /4 250 VMVM2C250GP S828 VMVM2C250GR05 S828 VMVM2C250GRD4 S828 1 VMVMC250GP S828 VMVMC250GR05 S828 VMVMC250GRD4 S828 /4 20 VMVM2C20GP S828 VMVM2C20GR05 S828 VMVM2C20GRD4 S828 1 VMVMC20GP S828 VMVMC20GR05 S828 VMVMC20GRD4 S828 /4 400** VMVM2C400GP S828 VMVM2C400GR05 S828 VMVM2C400GRD4 S828 1 VMVMC400GP S828 VMVMC400GR05 S828 VMVMC400GRD4 S828 Wall Mount Thru-Feed /4 250 VMVM2TW250GP S828 VMVM2TW250GR05 S828 1 VMVMTW250GP S828 VMVMTW250GR05 S828 /4 20 VMVM2TW20GP S828 VMVM2TW20GR05 S828 1 VMVMTW20GP S828 VMVMTW20GR05 S828 /4 400** VMVM2TW400GP S828 VMVM2TW400GR05 S828 1 VMVMTW400GP S828 VMVMTW400GR05 S828 Quad-Mount /4 250 VMVM25Q250GP S828 VMVM25Q250GR05 S828 VMVM25Q250GRD4 S828 Pendant, /4 20 VMVM25Q20GP S828 VMVM25Q20GR05 S828 VMVM25Q20GRD4 S828 Adjustable Thru-Feed, 25 Angle, 12 1 /2 Angle /4 400** VMVM25Q400GP S828 VMVM25Q400GR05 S828 VMVM25Q400GRD4 S828 Stanchion 1 1 /2 250 VMVMJ250GP S828 VMVMJ250GR05 S828 VMVMJ250GRD4 S828 Mount 1 1 /2 20 VMVMJ20GP S828 VMVMJ20GR05 S828 VMVMJ20GRD4 S828 25 Angle 1 1 /2 400** VMVMJ400GP S828 VMVMJ400GR05 S828 VMVMJ400GRD4 S828 L Stanchion 1 1 /2 250 VMVMP250GP S828 VMVMP250GR05 S828 Mount 1 1 /2 20 VMVMP20GP S828 VMVMP20GR05 S828 Straight 1 1 /2 400** VMVMP400GP S828 VMVMP400GR05 S828 * For GR02 Type II Refractor, change "GR05" at end of catalog number to "GR02". Ex. VMVM2A250GR02-S828 For GR0 Type III Refractor, change "GR05" at end of catalog number to "GR0". Ex. VMVM2A250GR0-S828 ** To be used with ED28 (bulb shaped lamp). 1. Add voltage suffix to end of catalog number Standard Voltage Ballasts 60Hz NEC/UL CEC/CSA (cul) Voltage Multi Tap 120V 480V Tri Tap 120V Suffix /MT /120 /480 /TT /120 Optional Voltage Ballasts - 50 or 60Hz EXPORT Voltage 220V 60Hz 220V 50Hz 20V 50Hz 240V 50Hz Suffix /220 /220 50 /20 50 /240 50 2. Options - Add the required option suffixes, see page 0000, in alpha-numeric order. Lamp Selection Table: Fixture Lamp Type Bulb Venture Phillips Sylvania MP 20W/BU/ED28/UVS/PS/EM/950 MS20/U/PS MS20/PS/BU-HOR VMVM20GP 20W PS MH ED28, BT28 MP 20W/BU/ED28/UVS/PS/740 MS20/C/BU/PS - MP 20W/C/BU/ED28/EVS/PS/77 - - VMVM400GP 400W PS MH ED28, BT28 MP 400W/BU/ED28/UVS/PS/EM/950 N/A M400/PS/U/BT28 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2012 Cooper Crouse-Hinds 95

L VMV High Wattage Series 250-400W Metal Halide For Medium and High Mounting Heights Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups E, F, G; Cl. III & Simultaneous Presence (with Glass Refractor) Marine (with Globe or Glass Refractor) & Wet Locations, R, 4, 4X; IP56 to IP66 To complete the catalog #, include information in notes 1 and 2 below. For guards and other optics see VMV High Wattage Series - Ordering By Components page. BASIC CATALOG NUMBER Mounting Style Pendant Mount (Rigid or Flexible) Hub Size Lamp Watts With G0 Globe and P Guard With GR05 Glass Refractor * With GRD4 Reflector/Lens /4 250 VMVM2A250GP VMVM2A250GR05 VMVM2A250GRD4 1 VMVMA250GP VMVMA250GR05 VMVMA250GRD4 /4 400 N/A VMVM2A400GR05 VMVM2A400GRD4 1 N/A VMVMA400GR05 VMVMA400GRD4 Ceiling Mount Thru-Feed /4 250 VMVM2C250GP VMVM2C250GR05 VMVM2C250GRD4 1 VMVMC250GP VMVMC250GR05 VMVMC250GRD4 /4 400 N/A VMVM2C400GR05 VMVM2C400GRD4 1 N/A VMVMC400GR05 VMVMC400GRD4 Wall Mount Thru-Feed /4 250 VMVM2TW250GP VMVM2TW250GR05 1 VMVMTW250GP VMVMTW250GR05 /4 400 N/A VMVM2TW400GR05 1 N/A VMVMTW400GR05 Quad-Mount /4 250 VMVM25Q250GP VMVM25Q250GR05 VMVM25Q250GRD4 Pendant, Adjustable Thru-Feed, 25 Angle, 12 1 /2 Angle /4 400 N/A VMVM25Q400GR05 VMVM25Q400GRD4 Stanchion Mount 1 1 /2 250 VMVMJ250GP VMVMJ250GR05 VMVMJ250GRD4 25 Angle L 1 1 /2 400 N/A VMVMJ400GR05 VMVMJ400GRD4 Stanchion Mount 1 1 /2 250 VMVMP250GP VMVMP250GR05 Straight 1 1 /2 400 N/A VMVMP400GR05 * For GR02 Type II Refractor, change "GR05" at end of catalog number to "GR02". Ex. VMVM2A250GR02 For GR0 Type III Refractor, change "GR05" at end of catalog number to "GR0". Ex. VMVM2A250GR0 1. Add voltage suffix to end of catalog number Standard Voltage Ballasts 60Hz NEC/UL CEC/CSA (cul) Voltage Multi Tap 120V 480V Tri Tap 120V Suffix /MT /120 /480 /TT /120 Optional Voltage Ballasts - 50 or 60Hz CEC/CSA (cul) - CWI Isolated Ballasts EXPORT Voltage 208V CWI 240V CWI 600V CWI 220V 60Hz 220V 50Hz 20V 50Hz 240V 50Hz Suffix /208CWI /240CWI /600CWI /220 /220 50 /20 50 /240 50 2. Options - Add the required option suffixes, see page 951, in alpha-numeric order. 954 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

VMV High Wattage Series Ordering by Components L VMV High Wattage Luminaires are available in components. A complete luminaire consists of: I. Champ Cover (Mounting Module) II. VMV Ballast Housing Include voltage and required option(s) III. Optical & Guard Components Globe, Reflector, Refractor, Guard I. Champ Cover (Mounting Module): Type Conduit Cat. # Pendant /4" APM2 1" APM Ceiling /4" CM2 1" CM Wall /4" TWM2 1" TWM Stanchion 25 Degree Angle 1 1 /2" JM5 Stanchion Straight 1 1 /2" PM5 Quad-Mount /4" QM25 II. Ballast Housings: Complete catalog number must have the voltage suffix (MT shown) and any options suffixes. Lamp Type Lamp Watts Cat. # High Pressure Sodium 200 VMVS200/MT 250 VMVS250/MT 400 VMVS400/MT Metal Halide 250 VMVM250/MT 400 VMVM400/MT III. Globe, Reflectors, Refractors, Guards: Type Cat. # Globe Globe Guard Reflector Dome Reflector Angle Refractor Type 2 Refractor Type Refractor Type 5 Refractor Guard High Bay Reflector/Lens G0 P RD79 RA79 GR02 GR0 GR05 P2 GRD4 L www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 955

VMV High Wattage Series Temperature Performance Data L Champ H.I.D. Luminaires High Pressure Sodium 200 250 400 40 25 C 50 C T2 T T4 TC T1/TC TC 75 55 25 C 50 C T2 T T4 75 65 25 C 50 C T2 T 85 40 50 C 50 C 25 C T T4 TC T1/TC TC 75 55 50 C 50 C 50 C T T4 85 65 50 C 50 C T 40 50 C 50 C T1 T T4 TC T1/TC TC 85 55 50 C 50 C T1 T T4 90 Metal Halide 200 250 400 40 50 C 25 C 50 C T T4 TB 50 C/TB TB 85 55 50 C 50 C 50 C T T4 90 40 50 C 25 C 50 C T T4 TB 50 C/TB TB 85 55 50 C 50 C 50 C T T4 90 40 25 C T1 T4 TB 50 C/TB TB 85 55 50 C T1 L Pulse Start Metal Halide (S828) 250 40 50 C 50 C 25 C T T4 TB 50 C/TB TB 85 55 50 C 50 C 50 C T T4 90 20 40 T1 25 C T2A T 90 400 40 T1 T1 T1 T T4 90 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2012 Cooper Crouse-Hinds 957

L VMV High Wattage Series Dimensions & Weights Champ H.I.D. Luminaires Dimensions In Inches: Pendant Mount Ceiling Mount Wall Mount Quad-Mount 25 Angle Stanchion Mount Luminaire with Glass Refractor, Guard L Straight Stanchion Mount Luminaire with Etched Alzak Reflector/Lens Luminaire with Globe, Guard, Reflectors Net Luminaire Weights (lbs.): Luminaire Series Lamp Watts Luminaire with: Globe, Reflector/ Guard (lbs.) Lens Glass Refractor (lbs.) VMVS VMVM 200 29 1 /2 0 2 1 /2 250 29 1 /2 0 2 1 /2 400 8 1 /2 9 41 1 /2 250 2 1 /2 5 /4 400 4 5 1 /2 Type Lbs. Type Lbs. Add for mounting modules: Pendant 1 1 /4 Quad-Mount 1 /2 Ceiling 2 /4 Angle Stanchion 1 /2 Wall 4 1 /2 Straight Stanchion 4 1 /2 Add for reflectors: Dome 1 1 /2 0 Angle 1 1 /2 High Bay 1 /4 Deduct: 1 1 /2 lb. for luminaire without P Guard 958 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

VMV High Wattage Series Photometric Data L Champ H.I.D. Luminaires Lamp: 250W/E 18 high pressure sodium (HPS) Total bare lamp lumens: 27500 Note: All data provided is for high pressure sodium luminaires with 250W/E 18 clear lamps. Use conversion factors (multipliers) shown below for other clear lamp types and wattages. Consult Cooper Crouse-Hinds for additional photometric data on any Champ series luminaire. Luminaire with Globe and Dome Reflector Multipliers (for use with candela curve only). Luminaire Series VMVS Lamp Watts Conversion Factor 200 0.80 400 1.82 Luminaire spacing ratio: 2.0 Coefficient of Utilization Effective Floor Cavity Reflectance 20% % Reflectance Room Cavity Ratio Eff. Ceil. Wall 1 2 4 5 50.750.640.550.476.416 80 0.711.582.482.402.41 10.677.52.429.46.285 50.72.625.58.465.405 70 0.696.570.474.97.5 10.664.526.424.4.282 50.695.594.51.44.88 50 0.666.549.458.84.26 10.641.509.414.6.279 50.66.567.490.42.71 0 0.640.50.44.72.16 10.618.496.405.0.27 50.65.542.469.405.55 10 0.615.510.429.60.07 10.597.48.95.2.268 0 0.580.464.77.05.251 % Reflectance Room Cavity Ratio Eff. Ceil. Wall 6 7 8 9 10 50.69.27.290.26.229 80 0.295.255.222.196.16 10.24.208.17.150.121 50.60.20.285.258.224 70 0.291.251.219.19.16 10.29.204.172.149.121 50.44.06.272.247.216 50 0.28.24.21.189.159 10.26.200.170.147.119 50.0.292.262.28.207 0 0.275.28.207.18.154 10.2.196.167.145.116 50.17.282.251.229.200 10 0.267.2.202.179.150 10.229.194.165.142.114 0 0.212.178.149.128.101 L www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 959

EVLP Low Profile Hazard Gard (H.I.D.) Luminaires Medium and Mogul Base Cl. I, Div. 1, Groups B (GB suffix), C, D Cl. I, Zone 1, Groups IIB + H2 (with suffix GB), IIB, IIA Cl. II, Div. 1, Groups E, F, G; Class III Marine & Wet Locations, R, 4, 4X; IP66 Applications: Cooper Crouse-Hinds Low Profile Hazard Gard luminaires are used in: Areas where flammable or explosive vapors or gases are present Hazardous areas, both indoors and outdoors, where long life and low maintenance costs are desired Petroleum refineries, chemical, petrochemical and pharmaceutical plants, oil terminals, gas plants and other heavy process industry facilities Waste treatment facilities Drilling platforms and other coastal and offshore hazardous areas Features and Benefits: Small, compact size is perfect where low mounting restrictions are a concern. Two start Acme threaded construction allows for easier assembly, installation and maintenance. Lightweight copper-free aluminum housing with powdered epoxy finish for superior corrosion resistance. All exterior hardware is corrosionresistant stainless steel. Four mounting arrangements: pendant, ceiling, wall bracket and stanchion suit any lighting layout. Wide range of light sources and wattages to meet specific lighting needs. Marine and NEMA 4X construction suitable for outdoor, hose down, marine and corrosive environments. Integral ballast for lowest installed cost. High power factor (90%+) ballasts allows more fixtures per circuit. Uses same mounting modules as the standard Hazard Gard for easy retrofitting when the Lo-Pro is the preferred choice. Internally fluted glass globe reduces glare and distributes light evenly ideal for adverse enviroments typical of industrial facilities. Krydon construction dome and angle reflectors won t rust, corrode, dent, chip or peel Now available in components luminaire body, mounting module, guard, reflectors allowing for easy stocking for Quick Ship requirements. Certifications and Compliances: NEC and CEC: Class I, Division 1, Groups B (with suffix GB), C, D All Wattages Class I, Zone 1, Groups IIB + H2 (with suffix GB), IIB, IIA All Wattages Class II and Class III UL Standards: 844, Hazardous (Classified) Locations 1598 Luminaires 1598A Marine Locations CSA Standards C22.2 No. 17 Options: Standard Materials: Mounting modules, cover, ballast housing, globe holder copper-free aluminum Globe heat and impact resistant glass Exterior hardware stainless steel Reflectors (dome & angle) Krydon fiberglass-reinforced polyester Standard Finishes: Copper-free aluminum Corro-free powdered epoxy Krydon white Stainless steel guard Ratings (Electrical/Size): Sources/Wattage: Medium Base 70 150W HPS, 70 175W MH Mogul Base 70 150W HPS, 70 250W MH Voltages: Medium & Mogul H.I.D. 120V 60Hz Multi-tap (120, 208, 240, 277V 60Hz) Tri-tap (120, 277, 47V 60Hz) 480V 60Hz Other voltages consult Cooper Crouse-Hinds Conduit Entries: /4", 1" NPT pendant, wall bracket, ceiling 1 1 /4" NPT stanchion Description Suffix Group B suitability... GB Ballast-Gard (HPS only)... BG Instant restrike (Mogul Base only)... IR 70 150W LX HPS Cannot use with BG Option Fused (not suitable for marine applications)...s658* Quartz auxiliary lighting (Mogul Base only)... QTZ Cannot use with IR option Uses 100W single ended double contract lamp Quartz lamp not included Factory assembled with lamps... FA *When ordering fuses for luminaires, option S658, you must specify the operating voltage. S658 cannot be ordered with /MT in the catalog number. Accessories: Description Cat. # Dome reflector RD79 Angle reflector RA79 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1001

EVLP Low Profile Hazard Gard Medium Base Cl. I, Div. 1, Groups B (GB suffix), C, D Cl. I, Zone 1, Groups IIB + H2 (with GB suffix), IIB, IIA Cl. II, Div. 1, Groups E, F, G; Class III Marine & Wet Locations, R, 4, 4X; IP66 Ordering Information: Pendant Wall Bracket Ceiling Stanchion Luminaire Body Less Mounting Module & Guard Pendant Mount Wall Bracket Mount Ceiling Mount Watt Hub Size (In.) With Guard Cat. # With Guard Cat. # With Guard Cat. # With Guard Cat. # Cat. # High Pressure Sodium /4 EVLPA142071 EVLPBX142071 EVLPCX142071 EVLP14070 70W 1 EVLPA14071 EVLPBX14071 EVLPCX14071 1 1 /4 EVLPJ144071 100W /4 EVLPA142101 EVLPBX142101 EVLPCX142101 EVLP14100 1 EVLPA14101 EVLPBX14101 EVLPCX14101 1 1 /4 EVLPJ144101 /4 EVLPA142151 EVLPBX142151 EVLPCX142150 EVLP14151 150W 1 EVLPA14151 EVLPBX14151 EVLPCX14151 1 1 /4 EVLPJ144151 Pulse Start Metal Halide /4 EVLPA192151 S828 EVLPBX192151 S828 EVLPCX192151 S828 EVLP19150 S828 150W 1 EVLPA19151 S828 EVLPBX19151 S828 EVLPCX19151 S828 1 1 /4 EVLPJ194151 S828 /4 EVLPA192171 S828 EVLPBX192171 S828 EVLPCX192171 S828 EVLP19175 S828 175W 1 EVLPA19171 S828 EVLPBX19171 S828 EVLPCX19171 S828 1 1 /4 EVLPJ194171 S828 Metal Halide 70W 100W 175W /4 EVLPA192071 EVLPBX192071 EVLPCX192071 EVLP19070 1 EVLPA19071 EVLPBX19071 EVLPCX19071 1 1 /4 EVLPJ194071 /4 EVLPA192101 EVLPBX192101 EVLPCX192101 EVLP19100 1 EVLPA19101 EVLPBX19101 EVLPCX19101 1 1 /4 EVLPJ194101 /4 EVLPA192171 EVLPBX192171 EVLPCX192171 EVLP19175 1 EVLPA19171 EVLPBX19171 EVLPCX19171 1 1 /4 EVLPJ194171 Stanchion Mount Complete Catalog Number as follows: 1. Standard Voltage Ballasts 60Hz NEC/UL CEC/CSA (cul) Voltage Multi Tap 120V 480V Tri Tap 120V Suffix /MT /120 /480 /TT /120 Optional Voltage Ballasts 50 or 60Hz *CEC/CSA (cul) CWI Isolated Ballasts EXPORT Voltage 208V CWI 240V CWI 600V CWI 220V 60Hz 220V 50Hz 20V 50Hz 240V 50Hz Suffix /208CWI /240CWI /600CWI /220 /220 50 /20 50 /240 50 2. 150W HPS Luminaires only 55V lamps add suffix "LX" 100V lamps add suffix "CE" Ceiling and bracket mounts have 4 hubs: are plugged. *CWI Isolated Ballasts are only available for high pressure sodium and 175W metal halide (non pulse start) luminaires. 1002 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

EVLP Low Profile Hazard Gard Mogul Base Cl. I, Div. 1, Groups B (GB suffix), C, D Cl. I, Zone 1, Groups IIB + H2 (with GB suffix), IIB, IIA Cl. II, Div. 1, Groups E, F, G; Class III Marine & Wet Locations, R, 4, 4X; IP66 Ordering Information: Pendant Mount Wall Bracket Mount Ceiling Mount Watt Hub Size(In.) With Guard Cat. # High Pressure Sodium Pendant Wall Bracket Ceiling Stanchion With Guard Cat. # With Guard Cat. # Luminaire Body Less Mounting Module & Guard With Guard Cat. # Cat. # /4 EVLPA042071 EVLPBX042071 EVLPCX042071 EVLP04070 70W 1 EVLPA04071 EVLPBX04071 EVLPCX04071 1 1 /4 EVLPJ044071 /4 EVLPA042101 EVLPBX042101 EVLPCX042101 EVLP04100 100W 1 EVLPA04101 EVLPBX04101 EVLPCX04101 1 1 /4 EVLPJ044101 /4 EVLPA042151 EVLPBX042151 EVLPCX042151 EVLP04150 150W 1 EVLPA04151 EVLPBX04151 EVLPCX04151 1 1 /4 EVLPJ044151 Pulse Start Metal Halide /4 EVLPA092151S828 EVLPBX092151S828 EVLPCX092151S828 EVLP09150S828 150W 1 EVLPA09151S828 EVLPBX09151S828 EVLPCX09151S828 1 1 /4 EVLPJ094151S828 /4 EVLPA092171S828 EVLPBX092171S828 EVLPCX092171S828 EVLP09170S828 175W 1 EVLPA09171S828 EVLPBX09171S828 EVLPCX09171S828 1 1 /4 EVLPJ094171S828 /4 EVLPA092201S828 EVLPBX092201S828 EVLPCX092201S828 EVLP09201S828 200W 1 EVLPA09201S828 EVLPBX09201S828 EVLPCX09201S828 1 1 /4 EVLPJ094201S828 /4 EVLPA092251S828 EVLPBX092251S828 EVLPCX092251S828 EVLP09250S828 250W 1 EVLPA09251S828 EVLPBX09251S828 EVLPCX09251S828 1 1 /4 EVLPJ094251S828 Metal Halide /4 EVLPA092071 EVLPBX092071 EVLPCX092071 EVLP09070 70W 1 EVLPA09071 EVLPBX09071 EVLPCX09071 1 1 /4 EVLPJ094071 /4 EVLPA092101 EVLPBX092101 EVLPCX092101 EVLP09100 100W 1 EVLPA09101 EVLPBX09101 EVLPCX09101 1 1 /4 EVLPJ094101 /4 EVLPA092171 EVLPBX092171 EVLPCX092171 EVLP09170 175W 1 EVLPA09171 EVLPBX09171 EVLPCX09171 1 1 /4 EVLPJ094171 /4 EVLPA092251 EVLPBX092251 EVLPCX092251 EVLP09250 250W 1 EVLPA09251 EVLPBX09251 EVLPCX09251 1 1 /4 EVLPJ094251 Complete Catalog Number as follows: Standard Voltage Ballasts 60Hz 1. NEC/UL CEC/CSA (cul) Voltage Multi Tap 120V 480V Tri Tap 120V Suffix /MT /120 /480 /TT /120 Optional Voltage Ballasts 50 or 60Hz *CEC/CSA (cul) CWI Isolated Ballasts EXPORT Voltage 208V CWI 240V CWI 600V CWI 220V 60Hz 220V 50Hz 20V 50Hz 240V 50Hz Suffix /208CWI /240CWI /600CWI /220 /220 50 /20 50 /240 50 Stanchion Mount 2. 150W HPS Luminaires only 55V lamps add suffix "LX" 100V lamps add suffix "CE" Example: EVLPA04151/MT-LX Ceiling and wall bracket mounts have 4 hubs: are plugged. *CWI Isolated Ballasts are only available for high pressure sodium and 175W 250W metal halide (non pulse start) luminaires. www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 100

EVLP Low Profile Hazard Gard Ordering by Components EVLP Luminaires are available in components. A complete luminaire consists of: Mounting Module Luminaire Body Guard, Dome Reflector or Angle Reflector Mounting Modules: Type Conduit Cat. # Pendant /4" EVMP2 1" EVMP Ceiling & Wall Box /4" EV22 1" EV Wall Bracket Arm Use EV22 or EV box with EV87 EV87 Stanchion 1 1 /4" EVMJ4 Guards Medium EV511 Mogul EV512 Reflectors Dome RD79 Angle RA79 Pendant Ceiling Stanchion Ceiling Wall Bracket EVMP2 EVMP EV22 EV EVMJ4 EV22 EV EV87 & EV22 or EV Luminaire Body EVLP0 Series H.I.D. Mogul Lamp EVLP1 Series H.I.D. Medium Lamp Guards Dome Reflector Angle Reflector EV511 EV512 RD79 RA79 1004 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

EVLP Low Profile Hazard Gard Temperature Performance Data Medium Base Lamp Luminaires: Class I, Group B (w/gb suffix) Groups C, D Class II, Groups E, F, G Class III Simultaneous Presence Maximum Ambient Watts 40 C 55 C 65 C 40 C Supply Wire C 70W T5 T4A T4A T4A 90 C High Pressure Sodium 100W T4A T4A T4 T4 90 C 150W T4 TC 90 C Metal Halide (including pulse start) 70W T5 T4A T4A T4 85 C 100W TC TC 90 C 150W TC TB 90 C 175W TC TB 90 C Mogul Base Lamp Luminaires: Class I, Group B (w/gb suffix) Groups C, D Class II, Groups E, F, G Class III Simultaneous Presence Maximum Ambient Watts 40 C 55 C 65 C 40 C Supply Wire C 70W T6 T5 T5 T5 90 C High Pressure Sodium 100W T5 T4A T4A 90 C 150W T4A T4 T4 90 C Metal Halide (including pulse start) 70W T6 T5 T5 T5 85 C 100W T5 T4A T4A T4A 90 C 150W T4 TC TC 90 C 175W T4 TC TC 90 C 200W TC 90 C 250W TC 90 C www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1005

EVLP Low Profile Hazard Gard Dimensions and Weights Dimensions In Inches: A B C D E F Medium Base 1.92 12.7 16.50 16.71 20.59 19.6 Mogul Base 15.69 14.69 18.25 18.46 22.4 21.0 Weights (lbs.): Luminaire w/guard Source Watts Medium Mogul High Pressure Sodium 70 4 6.5 100 6 8.5 150 6.5 9 Metal Halide 70.5 6 100 4.5 7 150 6 8.5 175 6 8.5 200 40.5 250 40.5 Medium Mogul Add Mounting Modules: Pendant 1 1 Ceiling 2 2 Bracket 4.5 4.5 Stanchion 2.5 2.5 Add For Reflectors: RA79 1 1 RD79 1 1 Deduct for Wire Guard 0.5 0.5 1006 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

EVLP Low Profile Hazard Gard Medium Base Photometric Data Medium Base Luminaire with Globe and Guard EVLPA14151 Lamp: 150W/B17 High Pressure Sodium (HPS) Medium Base Luminaire with Globe and Dome Reflector (Less Guard) EVLPA14150RD Lamp: 150W/B17 High Pressure Sodium (HPS) www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1007

EVLP Low Profile Hazard Gard Medium and Mogul Base Photometric Data Medium Base Luminaire with Globe and 0 Angle Reflector (Less Guard) EVLPA14150RA Lamp: 150W/B17 High Pressure Sodium (HPS) Mogul Base Luminaire with Globe and Guard EVLPA04151 Lamp: 150W/E2-1 /2 High Pressure Sodium (HPS) 1008 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

EVLP Low Profile Hazard Gard Mogul Base Photometric Data Mogul Base Luminaire with Globe and Dome Reflector (Less Guard) EVLPA04150RD Lamp: 150W/E2-1 /2 High Pressure Sodium (HPS) Mogul Base Luminaire with Globe and 0 Angle Reflector (Less Guard) EVLPA04150RA Lamp: 150W/E2-1 /2 High Pressure Sodium (HPS) www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1009

EVLP Low Profile Hazard Gard Mogul Base Photometric Data Mogul Base Luminaire with Globe and Guard EVLPA09171 Lamp: 175W/ED28 Metal Halide (MH) Mogul Base Luminaire with Globe and Dome Reflector (Less Guard) EVLPA09170RD Lamp: 175W/ED28 Metal Halide (MH) 1010 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

EVLP Low Profile Hazard Gard Mogul Base Photometric Data Mogul Base Luminaire with Globe and 0 Angle Reflector (Less Guard) EVLPA09170RA Lamp: 175W/ED28 Metal Halide (MH) www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1011

EVLS Hazard Gard Compact & Rugged, Class I, Zone 1, Div. 1 Explosionproof Luminaire Introducing a compact, affordable, explosionproof luminaire that has the best overall temperature performance ratings in its class! Cooper Crouse-Hinds EVLS Hazard Gard is perfect as a general area lighting workhorse where space constraints exist. EVLS Hazard Gard is easy to install, 175 watts and less, has select options that are just right for your budget AND it s Class I, Division 1, Group B with GB option! Cl. I, Div. 1, Group B (with suffix GB), C, D Cl. I, Zone 1, Group IIB + H2 (with suffix GB) Cl. II, Cl. III & Simultaneous Presence Standard Materials: Bodies, mounting modules and cast guards copper-free aluminum Wire guard stainless steel Globe heat- and impact-resistant glass Gaskets silicone and neoprene Standard Finishes: Epoxy powder coat paint UL and cul Listed Wet locations (UL1598) Marine locations (UL1598A) Type 4X, IP66 Applications: Cooper Crouse-Hinds EVLS Hazard Gard Lighting Fixures are used for general lighting and task lighting in: Areas where flammable or explosive vapors or gases are present Confined spaces or heavy process industry facilities Petroleum refineries; chemical, petrochemical and pharmaceutical plants; oil terminals; gas plants Waste treatment facilities Drilling platforms and other coastal and offshore hazardous areas Features: Compact and rugged - a Division 1 luminaire that fits in tight spaces Smooth turning two start Acme threads for mounting modules and globe attachments save time and eliminate installation damage Quick-connect design facilitates easy installation and saves money - install and wire the mounting module, and then screw in luminaire to make the electrical connection Best overall T-rating in the industry for a medium-base HID lamp - use in elevated ambient and illuminate the most volatile areas of your facility - optimal safety in your high-risk areas Factory-sealed - wired and sealed with no external sealing fittings required in Groups B, C, and D An adapter module is available for direct connection to existing Hazard Gard modules such as the EV22 ceiling mount Certification & Compliances: UL (844) and cul Listed (CSA C22.2 No. 17) for: Class I, Division 1, Groups B (with suffix GB), C, D Class I, Zone 1, Group IIB + H2 (with suffix GB) Class II, Class III & Simultaneous Presence Wet locations (UL1598), Marine locations (UL1598A), Type 4X, IP66 Ratings (Electrical Size): Sources/Wattages: HID Medium Base (initial offering) HPS: 50, 70, 100, 150 watt Metal Halide: 70, 100, 175 watt Pulse Start Metal Halide: 150, 175 watt Voltages: Multi-tap (120, 208, 240, 277V/60 Hz) 480V/60 Hz Tri-tap (120, 277, 47V/60 Hz) 220V/60 Hz 220/240V (or 20V)/50 Hz Transformer Types: HX-HPF Standard CWA Standard on 175W CWA Constant Wattage Autotransformer CWI Constant Wattage Insulation Transformer Available for HPS and MH, for most voltages and wattages (Additional voltages available on request.) Conduit Entries: /4" and 1" NPT pendant, ceiling and wall mount 1 1 /2" NPT stanchion Options: Description Instant Restrike (HPS) Ballast-Gard (HPS) Group B Suitability Accessories: Description Dome Reflector Angle Reflector Guard Suffix IR BG GB Suffix RD725 RA725 EV502 or P515 Two Start Acme Threads Quick Connect Design Adapter Module Available www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 985

EVLS Hazard Gard Compact & Rugged, Class I, Zone 1, Div. 1 Explosionproof Luminaire Cl. I, Div. 1, Groups B (with suffix GB), C, D Cl. I, Zone 1, Group IIB + H2 (with suffix GB) Cl. II, Cl. III & Simultaneous Presence UL and cul Listed Wet locations (UL1598), Marine locations (UL1598A) Type 4X, IP66 Ordering Reference Sheet: EVLS A 9 2 10 0 /MT -IR Hazard Gard Low-Profile Luminaire Class I, Div. 1/Class I, Zone 1 Class II, Groups F & G A = Pendant Mounting Type BX = Wall CX = Ceiling BH = Bulkhead J = Stanchion M = Mounting Module Adapter 4 = High-Press. Sodium Lamp Type 9 = Metal Halide Conduit Entry (specify with mtg. modules) 2 = /4" NPT (Pendant, Ceiling, Bulkhead & Wall mounts only) = 1" NPT (Pendant, Ceiling & Wall mounts only) 5 = 1-1/2" NPT (Stanchion only) 25 = 25 mm (Pendant, Ceiling, Bulkhead & Wall mounts only) 2 = 2 mm (Pendant, Ceiling & Wall mounts only) Note: Omit for mounting module adapter 05 = 50W HPS Lamp Wattage 07 = 70W HPS, MH by lamp type 10 = 100W HPS, MH 15 = 150 HPS, MH Pulse Start 17 = 175W MH, MH Pulse Start 0 = globe only, no guard Guard 1 = stainless steel wire guard (optional) 2 = cast aluminum guard Voltage and Frequency HPS MH 50 70 100 150 70 100 150 PS 175 175 PS DT x MT x x x x x x x TT x x x x x x x 120 x x x x x x x x 208 x x x x x x x 220 x x x x 220 50 x x x x x x x 240 x x x x x x x 240 50 x x x x x x x 277 x x x x x x x x 47 x x x x x x 480 x x x x x BG = Ballast Guard (lamp type S only) CWI = SCE Ballast GB = Group B suitability IR = Instant Restrike (lamp type S only) S828 = Pulse Start (175W & 150W MH only) Options Note: BG and IR options cannot be installed together. www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 987

EVLS Hazard Gard Compact & Rugged, Class I, Zone 1, Div. 1 Explosionproof Luminaire Cl. I, Div. 1, Groups B (with suffix GB), C, D Cl. I, Zone 1, Group IIB + H2 (with suffix GB) Cl. II, Cl. III & Simultaneous Presence UL and cul Listed Wet locations (UL1598), Marine locations (UL1598A) Type 4X, IP66 Ordering Information High Pressure Sodium: PENDANT BULKHEAD Wattage Hub Size No Guard Wire Guard Cast Guard No Guard Wire Guard Cast Guard 50W 70W 100W 150W /4" EVLSA42050 EVLSA42051 EVLSA42052 EVLSBH42050 EVLSBH42051 EVLSBH42052 1" EVLSA4050 EVLSA4051 EVLSA4052 1 1 /2" 25 mm EVLSA425050 EVLSA425051 EVLSA425052 EVLSBH425050 EVLSBH425051 EVLSBH425052 2 mm EVLSA42050 EVLSA42051 EVLSA42052 /4" EVLSA42070 EVLSA42071 EVLSA42072 EVLSBH42070 EVLSBH42071 EVLSBH42072 1" EVLSA4070 EVLSA4071 EVLSA4072 1 1 /2" 25 mm EVLSA425070 EVLSA425071 EVLSA425072 EVLSBH425070 EVLSBH425071 EVLSBH425072 2 mm EVLSA42070 EVLSA42071 EVLSA42072 /4" EVLSA42100 EVLSA42101 EVLSA42102 EVLSBH42100 EVLSBH42101 EVLSBH42102 1" EVLSA4100 EVLSA4101 EVLSA4102 1 1 /2" 25 mm EVLSA425100 EVLSA425101 EVLSA425102 EVLSBH425100 EVLSBH425101 EVLSBH425102 2 mm EVLSA42100 EVLSA42101 EVLSA42102 /4" EVLSA42150 EVLSA42151 EVLSA42152 EVLSBH42150 EVLSBH42151 EVLSBH42152 1" EVLSA4150 EVLSA4151 EVLSA4152 1 1 /2" 25 mm EVLSA425150 EVLSA425151 EVLSA425152 EVLSBH425150 EVLSBH425151 EVLSBH425152 2 mm EVLSA42150 EVLSA42151 EVLSA42152 Complete catalog number as follows: Standard Voltage Ballasts NEC/UL CEC/CSA (cul) Export Voltage Multi-tap 120V 480V Tri-Tap 120V 208V CWI 240V CWI 480V CWI 600V CWI 220V 60 Hz 220V 50 Hz 240V 50 Hz Suffix /MT /120 /480 /TT /120 /208CWI /240CWI /480CWI /600CWI /220 /220 50 /240 50 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 989

EVLS Hazard Gard Compact & Rugged, Class I, Zone 1, Div. 1 Explosionproof Luminaire Cl. I, Div. 1, Groups B (with suffix GB), C, D Cl. I, Zone 1, Group IIB + H2 (with suffix GB) Cl. II, Cl. III & Simultaneous Presence UL and cul Listed Wet locations (UL1598), Marine locations (UL1598A) Type 4X, IP66 Ordering Information High Pressure Sodium (Cont'd): WALL CEILING Wattage Hub Size No Guard Wire Guard Cast Guard No Guard Wire Guard Cast Guard 50W 70W 100W 150W /4" EVLSBX42050 EVLSBX42051 EVLSBX42052 EVLSCX42050 EVLSCX42051 EVLSCX42052 1" EVLSBX4050 EVLSBX4051 EVLSBX4052 EVLSCX4050 EVLSCX4051 EVLSCX4052 1 1 /2" 25 mm EVLSBX425050 EVLSBX425051 EVLSBX425052 EVLSCX425050 EVLSCX425051 EVLSCX425052 2 mm EVLSBX42050 EVLSBX42051 EVLSBX42052 EVLSCX42050 EVLSCX42051 EVLSCX42052 /4" EVLSBX42070 EVLSBX42071 EVLSBX42072 EVLSCX42070 EVLSCX42071 EVLSCX42072 1" EVLSBX4070 EVLSBX4071 EVLSBX4072 EVLSCX4070 EVLSCX4071 EVLSCX4072 1 1 /2" 25 mm EVLSBX425070 EVLSBX425071 EVLSBX425072 EVLSCX425070 EVLSCX425071 EVLSCX425072 2 mm EVLSBX42070 EVLSBX42071 EVLSBX42072 EVLSCX42070 EVLSCX42071 EVLSCX42072 /4" EVLSBX42100 EVLSBX42101 EVLSBX42102 EVLSCX42100 EVLSCX42101 EVLSCX42102 1" EVLSBX4100 EVLSBX4101 EVLSBX4102 EVLSCX4100 EVLSCX4101 EVLSCX4102 1 1 /2" 25 mm EVLSBX425100 EVLSBX425101 EVLSBX425102 EVLSCX425100 EVLSCX425101 EVLSCX425102 2 mm EVLSBX42100 EVLSBX42101 EVLSBX42102 EVLSCX42100 EVLSCX42101 EVLSCX42102 /4" EVLSBX42150 EVLSBX42151 EVLSBX42152 EVLSCX42150 EVLSCX42151 EVLSCX42152 1" EVLSBX4150 EVLSBX4151 EVLSBX4152 EVLSCX4150 EVLSCX4151 EVLSCX4152 1 1 /2" 25 mm EVLSBX425150 EVLSBX425151 EVLSBX425152 EVLSCX425150 EVLSCX425151 EVLSCX425152 2 mm EVLSBX42150 EVLSBX42151 EVLSBX42152 EVLSCX42150 EVLSCX42151 EVLSCX42152 Complete catalog Standard Voltage Ballasts number as follows: NEC/UL CEC/CSA (cul) Export Voltage Multi-tap 120V 480V Tri-Tap 120V 208V 240V 480V 600V 220V CWI CWI CWI CWI 60 Hz 220V 50 Hz 240V 50 Hz Suffix /MT /120 /480 /TT /120 /208CWI /240CWI /480CWI /600CWI /220 /220 50 /240 50 990 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2012 Cooper Crouse-Hinds

EVLS Hazard Gard Compact & Rugged, Class I, Zone 1, Div. 1 Explosionproof Luminaire Cl. I, Div. 1, Groups B (with suffix GB), C, D Cl. I, Zone 1, Group IIB + H2 (with suffix GB) Cl. II, Cl. III & Simultaneous Presence UL and cul Listed Wet locations (UL1598), Marine locations (UL1598A) Type 4X, IP66 Ordering Information Pulse Start Metal Halide: Wattage Hub Size 150W 175W PENDANT BULKHEAD No Guard Wire Guard Cast Guard No Guard Wire Guard Cast Guard /4" EVLSA92150-S828 EVLSA92151-S828 EVLSA92152-S828 EVLSBH92150-S828 EVLSBH92151-S828 EVLSBH92152-S828 1" EVLSA9150-S828 EVLSA9151-S828 EVLSA9152-S828 1 1 /2" 25 mm EVLSA925150-S828 EVLSA925151-S828 EVLSA925152-S828 EVLSBH925150-S828 EVLSBH925151-S828 EVLSBH925152-S828 2 mm EVLSA92150-S828 EVLSA92151-S828 EVLSA92152-S828 /4" EVLSA92170-S828 EVLSA92171-S828 EVLSA92172-S828 EVLSBH92170-S828 EVLSBH92171-S828 EVLSBH92172-S828 1" EVLSA9170-S828 EVLSA9171-S828 EVLSA9172-S828 1 1 /2" 25 mm EVLSA925170-S828 EVLSA925171-S828 EVLSA925172-S828 EVLSBH925170-S828 EVLSBH925171-S828 EVLSBH925172-S828 2 mm EVLSA92170-S828 EVLSA92171-S828 EVLSA92172-S828 Ordering Information Pulse Start Metal Halide: Wattage Hub Size 150W 175W WALL CEILING No Guard Wire Guard Cast Guard No Guard Wire Guard Cast Guard /4" EVLSBX92150-S828 EVLSBX92151-S828 EVLSBX92152-S828 EVLSCX92150-S828 EVLSCX92151-S828 EVLSCX92152-S828 1" EVLSBX9150-S828 EVLSBX9151-S828 EVLSBX9152-S828 EVLSCX9150-S828 EVLSCX9151-S828 EVLSCX9152-S828 1 1 /2" 25 mm EVLSBX925150-S828 EVLSBX925151-S828 EVLSBX925152-S828 EVLSCX925150-S828 EVLSCX925151-S828 EVLSCX925152-S828 2 mm EVLSBX92150-S828 EVLSBX92151-S828 EVLSBX92152-S828 EVLSCX92150-S828 EVLSCX92151-S828 EVLSCX92152-S828 /4" EVLSBX92170-S828 EVLSBX92171-S828 EVLSBX92172-S828 EVLSCX92170-S828 EVLSCX92171-S828 EVLSCX92172-S828 1" EVLSBX9170-S828 EVLSBX9171-S828 EVLSBX9172-S828 EVLSCX9170-S828 EVLSCX9171-S828 EVLSCX9172-S828 1 1 /2" 25 mm EVLSBX925170-S828 EVLSBX925171-S828 EVLSBX925172-S828 EVLSCX925170-S828 EVLSCX925171-S828 EVLSCX925172-S828 2 mm EVLSBX92170-S828 EVLSBX92171-S828 EVLSBX92172-S828 EVLSCX92170-S828 EVLSCX92171-S828 EVLSCX92172-S828 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 99

EVLS Hazard Gard Compact & Rugged, Class I, Zone 1, Div. 1 Explosionproof Luminaire Cl. I, Div. 1, Group B (with suffix GB), C, D Cl. I, Zone 1, Group IIB + H2 (with suffix GB) Cl. II, Cl. III & Simultaneous Presence UL and cul Listed Wet locations (UL1598) Marine locations (UL1598A) Type 4X, IP66 Ordering Information Metal Halide (Cont'd): Wattage 70W 100W 175W WALL CEILING Hub Size No Guard Wire Guard Cast Guard No Guard Wire Guard Cast Guard /4" EVLSBX92070 EVLSBX92071 EVLSBX92072 EVLSCX92070 EVLSCX92071 EVLSCX92072 1" EVLSBX9070 EVLSBX9071 EVLSBX9072 EVLSCX9070 EVLSCX9071 EVLSCX9072 1 1 /2" 25 mm EVLSBX925070 EVLSBX925071 EVLSBX925072 EVLSCX925070 EVLSCX925071 EVLSCX925072 2 mm EVLSBX92070 EVLSBX92071 EVLSBX92072 EVLSCX92070 EVLSCX92071 EVLSCX92072 /4" EVLSBX92100 EVLSBX92101 EVLSBX92102 EVLSCX92100 EVLSCX92101 EVLSCX92102 1" EVLSBX9100 EVLSBX9101 EVLSBX9102 EVLSCX9100 EVLSCX9101 EVLSCX9102 1 1 /2" 25 mm EVLSBX425100 EVLSBX425101 EVLSBX425102 EVLSCX925100 EVLSCX925101 EVLSCX925102 2 mm EVLSBX42100 EVLSBX42101 EVLSBX42102 EVLSCX92100 EVLSCX92101 EVLSCX92102 /4" EVLSBX92170 EVLSBX92171 EVLSBX92172 EVLSCX92170 EVLSCX92171 EVLSCX92172 1" EVLSBX9170 EVLSBX9171 EVLSBX9172 EVLSCX9170 EVLSCX9171 EVLSCX9172 1 1 /2" 25 mm EVLSBX925170 EVLSBX925171 EVLSBX925172 EVLSCX925170 EVLSCX925171 EVLSCX925172 2 mm EVLSBX92170 EVLSBX92171 EVLSBX92172 EVLSCX92170 EVLSCX92171 EVLSCX92172 Complete catalog number as follows: Standard Voltage Ballasts NEC/UL CEC/CSA (cul) Export Voltage Multi-tap 120V 480V Tri-Tap 120V 208V CWI 240V CWI 480V CWI 600V CWI 220V 60 Hz 220V 50 Hz 20V* 50 Hz 240V 50 Hz Suffix /MT /120 /480 /TT /120 /208CWI /240CWI /480CWI /600CWI /220 /220 50 /20 50 /240 50 *Available for 175W only. 996 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

EVLS Hazard Gard Compact & Rugged, Class I, Zone 1, Div. 1 Explosionproof Luminaire Cl. I, Div. 1, Group B (with suffix GB), C, D Cl. I, Zone 1, Group IIB + H2 (with suffix GB) Cl. II, Cl. III & Simultaneous Presence UL and cul Listed Wet locations (UL1598) Marine locations (UL1598A) Type 4X, IP66 Ordering Information Metal Halide (Cont'd): Wattage 70W 100W 175W STANCHION ADAPTER Hub Size No Guard Wire Guard Cast Guard No Guard Wire Guard Cast Guard Luminaire less mounting module and guard Adapter EVLSM9070 EVLSM9071 EVLSM9072 EVLS9070 1 1 /2" EVLSJ95070 EVLSJ95071 EVLSJ95072 Adapter EVLSM9100 EVLSM9101 EVLSM9102 EVLS9100 1 1 /2" EVLSJ95100 EVLSJ95101 EVLSJ95102 Adapter EVLSM9170 EVLSM9171 EVLSM9172 EVLS9100 /4" EVLS9170 1 1 /2" EVLSJ95170 EVLSJ95171 EVLSJ95172 Complete catalog number as follows: Standard Voltage Ballasts NEC/UL CEC/CSA (cul) Export Voltage Multi-tap 120V 480V Tri-Tap 120V 208V CWI 240V CWI 480V CWI 600V CWI 220V 60 Hz 220V 50 Hz 20V* 50 Hz 240V 50 Hz Suffix /MT /120 /480 /TT /120 /208CWI /240CWI /480CWI /600CWI /220 /220 50 /20 50 /240 50 *Available for 175W only. EVLS Metal Halide: Fixture with Globe and Domed Reflector (less guard) EVLSA92170RD725 Lamp: 150W/ED17 Metal Halide (MH) www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 997

EVLS Hazard Gard Compact & Rugged, Class I, Zone 1, Div. 1 Explosionproof Luminaire EVLS Metal Halide: Fixture with Globe and Guard EVLSA92171 Lamp: 175W/ED17 Metal Halide (MH) Cl. I, Div. 1, Group B (with suffix GB), C, D Cl. I, Zone 1, Group IIB + H2 (with suffix GB) Cl. II, Cl. III & Simultaneous Presence UL and cul Listed Wet locations (UL1598) Marine locations (UL1598A) Type 4X, IP66 EVLS Metal Halide: Fixture with Globe and Angled Reflector (less guard) EVLSA92170RA725 Lamp: 175W/ED17 Metal Halide (MH) 998 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C, D) Cl. I, Div. 1, Groups B (GB suffix), C, D Cl. I, Zone 1, Groups IIB + H2 (with suffix GB), IIB IIA Cl. II, Div. 1, Groups E, F, G; Class III Paint Spray (100W max) Marine & Wet Locations, R, 4, 4X; IP66 Applications: Hazard Gard luminaires are used in: Heavy process industries where flammable or explosive vapors, gases or combustible dusts are present Hazardous areas, both indoors and outdoors where long life and low maintenance costs are desired Petroleum refineries, chemical, petrochemical and other heavy process industry facilities Paint spray facilities Hazardous locations requiring elevated ambient capability Features: Luminaire is factory wired; power is fed through "wireless" connection block which serves as a mechanical seal between conduit and ballast compartments, eliminating the need for an external, field installed seal. The result is fast, easy installation. Dome and 0 angle reflectors made of Krydon material won't rust, corrode, dent, chip or peel (order separately see page 1015). High bay reflectors of Alzak aluminum for high wattage applications. Internally fluted glass globes reduce glare and provide comfortable viewing light. Wide range of light sources and wattages to meet specific lighting needs 50 400W high pressure sodium (HPS); 70 400W metal halide (MH). High power factor (90%+) ballasts reduce power costs allow more luminaires per circuit. Four mounting arrangements to suit any lighting layout pendant, ceiling, wall bracket and stanchion. Paint spray booth suitability on 50 to 100 watt luminaires provides efficient, economical H.I.D. lighting for areas where paint residue may accumulate on luminaires. Elevated ambient capability permits reliable operation at high ambient temperature. Selected luminaires are suitable for ambient temperature up to 75 C. Integral ballasts separate ballasts are not required. Lowest installed cost. Factory sealed, porcelain, mogul base socket. Certifications and Compliances: NEC and CEC: Class I, Division 1, Groups B (with suffix GB), C, D Class I, Zone 1, Groups IIB + H2 (with suffix GB), IIB, IIA 100W max Paint Spray Suitability 175W max Class II, Class III UL Standards: 844 Hazardous (Classified) Locations 1598 Luminaires 1598A Marine Locations CSA Standards: C22.2 No. 17 Standard Materials: Mounting modules, cover, ballast housing, guard, globe ring copper-free aluminum Globe heat and impact resistant glass Exterior hardware stainless steel Lamp socket porcelain with stainless steel screw shell Reflectors dome and angle: Krydon fiberglass-reinforced polyester material; high bay: Alzak aluminum Standard Finishes: Copper-free aluminum epoxy powder coat Krydon high reflectance white Alzak natural (anodized) Options: Description Suffix Fused to protect ballast and capacitor against abnormal line conditions. (Not suitable for marine applications)... S658 Instant restrike enables a hot HPS lamp to immediately restrike after a momentary loss of arc due to voltage fluctuation or power outage. It has no effect on the warm-up period of a cold lamp (50-150W LX HPS only).... IR* Quartz auxiliary lighting quartz lamp comes to full brightness instantly upon restoration of power to provide emergency illumination during the normal restrike period of the H.I.D. lamp (for use with ED28 lamp). (Quartz lamp not included; use 100 W single-ended lamp Q100DC, Q100CL/DC, or 100Q/CL/DC.)... QTZ Ballast-Gard to eliminate the normally continuous high voltage pulsing in the event of a cycling lamp, inoperative lamp, or no lamp in the socket extending the life of the ballast. (For use with 50-400W HPS lamps.)... BG* Group B suitability luminaires suitable for use in Class I, Group B hazardous (classified) locations... GB Hazard Gard supplied with trunnion arm for floodlighting applications. For use on pendant mount luminaires only. See Floodlight Section... S812 Size Ranges: /4", 1" and 1 1 /4" hubs (see ordering information see pages 101 1014) Electrical Rating Ranges: 120, 208, 240, 277, 47, 480, 600, multi-tap* 50 to 400 watts *IR and BG options cannot be used together. When ordering fuses for luminaires, option S658, you must specify the operating voltage. S658 cannot be ordered with /MT in the catalog number. Can be used with BG option. CSA Certified are not available with multi-tap ballast or S658 fuse option. Alzak is a registered trademark of ALCOA. 1012 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

50 400W EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C, D) Cl. I, Div. 1, Groups B (GB suffix), C, D Cl. I, Zone 1, Groups IIB + H2 (with suffix GB), IIB, IIA Cl. II, Div. 1, Groups E, F, G; Class III Paint Spray (100W max) Marine & Wet Locations, R, 4, 4X; IP66 Watts Hub Size (In.) Without Guard Cat. # High Pressure Sodium 50 70 100 150 200 250 400 Pendant Luminaires Wall Bracket Luminaires Ceiling Luminaires Stanchion Luminaires (25 ) With Guard Cat. # Without Guard Cat. # With Guard Cat. # Without Guard Cat. # With Guard Cat. # Without Guard Cat. # With Guard Cat. # /4 EVMA42050 EVMA42051 EVMBX42050 EVMBX42051 EVMCX42050 EVMCX42051 1 EVMA4050 EVMA4051 EVMBX4050 EVMBX4051 EVMCX4050 EVMCX4051 1 1 /4 EVMJ44050 EVMJ44051 /4 EVMA42070 EVMA42071 EVMBX42070 EVMBX42071 EVMCX42070 EVMCX42071 1 EVMA4070 EVMA4071 EVMBX4070 EVMBX4071 EVMCX4070 EVMCX4071 1 1 /4 EVMJ44070 EVMJ44071 /4 EVMA42100 EVMA42101 EVMBX42100 EVMBX42101 EVMCX42100 EVMCX42101 1 EVMA4100 EVMA4101 EVMBX4100 EVMBX4101 EVMCX4100 EVMCX4101 1 1 /4 EVMJ44100 EVMJ44101 /4 EVMA42150 EVMA42151 EVMBX42150 EVMBX42151 EVMCX42150 EVMCX42151 1 EVMA4150 EVMA4151 EVMBX4150 EVMBX4151 EVMCX4150 EVMCX4151 1 1 /4 EVMJ44150 EVMJ44151 /4 EVMA42200 EVMA42201 EVMBX42200 EVMBX42201 EVMCX42200 EVMCX42201 1 EVMA4200 EVMA4201 EVMBX4200 EVMBX4201 EVMCX4200 EVMCX4201 1 1 /4 EVMJ44200 EVMJ44201 /4 EVMA42250 EVMA42251 EVMBX42250 EVMBX42251 EVMCX42250 EVMCX42251 1 EVMA4250 EVMA4251 EVMBX4250 EVMBX4251 EVMCX4250 EVMCX4251 1 1 /4 EVMJ44250 EVMJ44251 /4 EVMA42400 EVMA42401 EVMBX42400 EVMBX42401 EVMCX42400 EVMCX42401 1 EVMA4400 EVMA4401 EVMBX4400 EVMBX4401 EVMCX4400 EVMCX4401 1 1 /4 EVMJ44400 EVMJ44401 Complete the Catalog Number by Adding Voltage and Options Suffixes as Follows: Standard Voltage Ballasts 60Hz NEC/UL CEC/CSA (cul) 1. Voltage Multi Tap 120V 480V Tri Tap 120V Suffix /MT /120 /480 /TT /120 Optional Voltage Ballasts 50 or 60Hz CEC/CSA (cul) CWI Isolated Ballasts EXPORT Voltage 208V CWI 240V CWI 480V CWI 600V CWI 220V 60Hz 220V 50Hz 20V 50Hz 240V 50Hz Suffix /208CWI /240CWI /480CWI /600CWI /220 /220 50 /20 50 /240 50 2. 150W HPS Luminaires, 55V Lamps is Standard, for 100V lamps - Add suffix "CE". Options - Add the Required Options Suffixes, see page 1012, in alpha-numeric order. www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 101

70 400W EVM Hazard Gard H.I.D Luminaires Factory Sealed (Groups C, D) Cl. I, Div. 1, Groups B (GB suffix), C, D Cl. I, Zone 1, Groups IIB + H2 (with suffix GB), IIB, IIA Cl. II, Div. 1, Groups E, F, G; Class III Paint Spray (100W max.) Marine & Wet Locations, R, 4, 4X; IP66 Watts Pulse Start Metal Halide 150 Hub Size (In.) Pendant Luminaires Wall Bracket Luminaires Ceiling Luminaires Stanchion Luminaires (25 ) Without Guard Cat. # With Guard Cat. # Without Guard Cat. # With Guard Cat. # Without Guard Cat. # With Guard Cat. # /4 EVMA92150 S828 EVMA92151 S828 EVMBX92150 S828 EVMBX92151 S828 EVMCX92150 S828 EVMCX92151 S828 Without Guard Cat. # With Guard Cat. # 1 EVMA9150 S828 EVMA9151 S828 EVMBX9150 S828 EVMBX9151 S828 EVMCX9150 S828 EVMCX9151 S828 1 1 /4 EVMJ94150 S828 EVMJ94151 S828 175 200 250 20 /4 EVMA92170 S828 EVMA92171 S828 EVMBX92170 S828 EVMBX92171 S828 EVMCX92170 S828 EVMCX92171 S828 1 EVMA9170 S828 EVMA9171 S828 EVMBX9170 S828 EVMBX9171 S828 EVMCX9170 S828 EVMCX9171 S828 1 1 /4 EVMJ94170 S828 EVMJ94171 S828 /4 EVMA92200 S828 EVMA92201 S828 EVMBX92200 S828 EVMBX92201 S828 EVMCX92200 S828 EVMCX92201 S828 1 EVMA9200 S828 EVMA9201 S828 EVMBX9200 S828 EVMBX9201 S828 EVMCX9200 S828 EVMCX9201 S828 1 1 /4 EVMJ94200 S828 EVMJ94201 S828 /4 EVMA92250 S828 EVMA92251 S828 EVMBX92250 S828 EVMBX92251 S828 EVMCX92250 S828 EVMCX92251 S828 1 EVMA9250 S828 EVMA9251 S828 EVMBX9250 S828 EVMBX9251 S828 EVMCX9250 S828 EVMCX9251 S828 1 1 /4 EVMJ94250 S828 EVMJ94251 S828 /4 EVMA9220 S828 EVMA9221 S828 EVMBX9220 S828 EVMBX9221 S828 EVMCX9220 S828 EVMCX9221 S828 1 EVMA920 S828 EVMA921 S828 EVMBX920 S828 EVMBX921 S828 EVMCX920 S828 EVMCX921 S828 1 1 /4 EVMJ9420 S828 EVMJ9421 S828 400 Metal Halide 70 /4 EVMA92400 S828 EVMA92401 S828 EVMBX92400 S828 EVMBX92401 S828 EVMCX92400 S828 EVMCX92401 S828 1 EVMA9400 S828 EVMA9401 S828 EVMBX9400 S828 EVMBX9401 S828 EVMCX9400 S828 EVMCX9401 S828 1 1 /4 EVMJ94400 S828 EVMJ94401 S828 /4 EVMA92070 EVMA92071 EVMBX92070 EVMBX92071 EVMCX92070 EVMCX92071 1 EVMA9070 EVMA9071 EVMBX9070 EVMBX9071 EVMCX9070 EVMCX9071 1 1 /4 EVMJ94070 EVMJ94071 100 /4 EVMA92100 EVMA92101 EVMBX92100 EVMBX92101 EVMCX92100 EVMCX92101 1 EVMA9100 EVMA9101 EVMBX9100 EVMBX9101 EVMCX9100 EVMCX9101 1 1 /4 EVMJ94100 EVMJ94101 175 250 400 /4 EVMA92170 EVMA92171 EVMBX92170 EVMBX92171 EVMCX92170 EVMCX92171 1 EVMA9170 EVMA9171 EVMBX9170 EVMBX9171 EVMBX9170 EVMCX9171 1 1 /4 EVMJ94170 EVMJ94171 /4 EVMA92250 EVMA92251 EVMBX92250 EVMBX92251 EVMCX92250 EVMCX92251 1 EVMA9250 EVMA9251 EVMBX9250 EVMBX9251 EVMCX9250 EVMCX9251 1 1 /4 EVMJ94250 EVMJ94251 /4 EVMA92400 EVMA92401 EVMBX92400 EVMBX92401 EVMCX92400 EVMCX92401 1 EVMA9400 EVMA9401 EVMBX9400 EVMBX9401 EVMCX9400 EVMCX9401 1 1 /4 EVMJ94400 EVMJ94401 Complete the Catalog Number by Adding Voltage and Options Suffixes as Follows: Standard Voltage Ballasts 60Hz NEC/UL CEC/CSA (cul) 1. Voltage Multi Tap Dual-Tap 120V 480V Tri Tap Dual-Tap 120V Suffix /MT /DT /120 /480 /TT /DT /120 Optional Voltage Ballasts 50 or 60Hz *CEC/CSA (cul) CWI Isolated Ballasts EXPORT Voltage 208V CWI 240V CWI 600V CWI 220V 60Hz 220V 50Hz 20V 50Hz 240V 50Hz Suffix /208CWI /240CWI /600CWI /220 /220 50 /20 50 /240 50 2. 150W HPS Luminaires, 55V Lamps is Standard, for 100V lamps - Add suffix "CE". Options - Add the Required Options Suffixes, see page 1012, in alpha-numeric order. *CWI Isolated Ballasts are only available for 175W 400W metal halide (non pulse start) luminaires. 1014 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

EVM Hazard Gard H.I.D. Luminaires Accessories and Temperature Performance Data Reflectors Dome 0 Angle High Bay Type Cat. # Dome RD79 0 Angle RA79 High Bay EV912 Temperature Performance Data Maximum Ambient Paint Spray Booth Class II Simultaneous Class I (E, F, G) Presence Watts 40 C 55 C 65 C 75 C 40 C 40 C 40 C C High Pressure Sodium 50 T6 T6 T6 T5 T4 T4 T4A 90 70 T6 T6 T5 T4A T4 T4 T4A 90 100 T5 T5 T4A T4A T4 T4 T4A 90 150 T4A T4A T4 TC TC 90 200 T4A T4A T4 90 250 T4 TC 90 400 TC 90 Metal Halide (Including Pulse Start) 70 T6 T6 T5 T TC TC T4A 90 100 T5 T5 T4A T TC TC T4A 90 150 T4A T4 T4 TC TC 90 175 T4A T4 T4 TC TC 90 200 T4 TC 90 250 T4 TC 90 20 TA 90 400 TA 90 Supply Wire www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1015

EVM Hazard Gard H.I.D. Luminaires Dimensions and Weights Dimensions: Luminaire Net Weights: H.I.D. Source High Pressure Sodium Metal Halide Lamp Watts 50 40 70 40 100 44 150 (55V) 45 150 (100V) 44 200 46 250 46 400 55 70 9 100 9 175 42 250 4 400 51 Luminaire Only with Globe and Guard (lbs.) Type Lbs. Type Lbs. Add for Mounting Modules: Pendant 1 Bracket 4 1 /4 Ceiling 2 Stanchion 2 1 /4 Add for Reflectors: RD79 1 /4 RA79 2 EV912 2 1 /2 Deduct: 1 1 /2 lbs. for luminaire without guard. Guard EV50 EV5140 100, 175, 250W MV 50, 70, 100, 150W HPS 70, 100, 175, 250W MH All luminaires with QTZ option and 200, 250, 400W HPS 400W MV & MH All Reflectors High Dome Bay Type a b f g c d e EVMA 25 1 /16 26 27 5 /16 28 1 /4 2 7 /8 26 7 /16 28 9 /16 EVMBX 27 7 /8 28 1 /16 0 1 /8 1 1 /16 26 11 /16 29 /4 1 /8 EVMCX 24 24 15 /16 26 1 /4 27 /16 22 1 /16 25 /8 27 1 /2 EVMJ 22 11 /16 24 1 /8 25 1 /4 26 1 /8 25 /8 27 11 /16 28 /4 0 Angle 1016 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

EVM Hazard Gard H.I.D. Luminaires Photometric Data Lamp: 150W/E-2-1 /2 high pressure sodium (HPS) Total bare lamp lumens: 16,000 Luminaire With Globe and Without Guard Note: Photometric data was developed using a 150 watt clear high pressure sodium lamp (16,000 lumens). For other clear lamps, use the following conversion factors (multipliers): 50W HPS.25; 70W HPS.40; 100W HPS.59. Multipliers are for use with candela curve only. Luminaire spacing ratio is 0.80. Coefficient of Utilization Effective Floor Cavity Reflectance 20% % Reflectance Room Cavity Ratio Eff. Ceil. Wall 1 2 4 5 50.695.579.494.410.82 80 0.644.509.417.26.05 10.599.450.56.262.246 50.659.549.469.87.6 70 0.61.484.97.11.291 10.570.41.41.251.26 50.592.491.419.44.27 50 0.555.49.60.279.265 10.522.9.12.229.218 50.51.48.7.04.292 0 0.502.96.25.250.240 10.474.58.284.207.200 50.476.90.1.267.260 10 0.451.55.291.222.217 10.429.25.257.184.181 0 0.99.295.20.159.159 % Reflectance Room Cavity Ratio Eff. Ceil. Wall 6 7 8 9 10 50.42.06.278.265.2 80 0.266.24.209.198.168 10.212.184.160.15.127 50.24.292.265.25.222 70 0.254.22.201.191.16 10.202.176.155.149.12 50.292.26.240.21.20 50 0.22.20.184.177.150 10.187.162.14.19.114 50.262.26.218.210.185 0 0.211.186.167.162.18 10.172.148.12.129.105 50.24.21.195.191.167 10 0.190.169.152.149.125 10.156.15.121.118.096 0 0.15.116.10.10.081 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1017

EVM Hazard Gard H.I.D. Luminaires Photometric Data Lamp: 150W/E-2-1 /2 high pressure sodium (HPS) Total bare lamp lumens: 16000 Luminaire With Globe, Hi-Bay Reflector and Without Guard Note: Photometric data was developed using a 150 watt clear high pressure sodium lamp (16,000 lumens). For other clear lamps, use the following conversion factors (multipliers): 50W HPS.25; 70W HPS.40; 100W HPS.59. Multipliers are for use with candela curve only. Luminaire spacing ratio is 1.00. Lamp: 150W/E-2-1 /2 high pressure sodium (HPS) Total bare lamp lumens: 16000 Luminaire With Globe, Dome Reflector and Without Guard Note: Photometric data was developed using a 150 watt clear high pressure sodium lamp (16,000 lumens). For other clear lamps, use the following conversion factors (multipliers): 50W HPS.25; 70W HPS.40; 100W HPS.59. Multipliers are for use with candela curve only. Luminaire spacing ratio is 1.20. Coefficient of Utilization Effective Floor Cavity Reflectance 20% % Reflectance Room Cavity Ratio Eff. Ceil. Wall 1 2 4 5 50.668.618.57.51.494 80 0.651.592.542.495.455 10.66.569.517.468.427 50.655.608.566.525.487 70 0.69.58.56.491.452 10.625.564.51.464.425 50.629.587.550.511.476 50 0.616.568.525.482.446 10.606.550.505.459.422 50.606.569.55.498.466 0 0.597.554.514.474.48 10.588.59.497.454.418 50.586.55.522.487.457 10 0.578.59.504.466.4 10.570.528.489.449.41 0 0.560.517.479.49.404 % Reflectance Room Cavity Ratio Eff. Ceil. Wall 6 7 8 9 10 50.460.427.96.69.28 80 0.420.88.58.0.288 10.94.61.0.0.262 50.455.42.92.66.25 70 0.418.85.56.28.288 10.91.59.29.0.262 50.444.414.85.60.20 50 0.412.80.52.25.285 10.88.57.28.01.261 50.46.406.79.54.15 0 0.407.77.48.22.282 10.85.54.26.00.259 50.428.400.7.48.11 10 0.402.7.45.19.280 10.82.52.24.298.258 0 0.7.4.15.290.249 Coefficient of Utilization Effective Floor Cavity Reflectance 20% % Reflectance Room Cavity Ratio Eff. Ceil. Wall 1 2 4 5 50.716.67.568.507.455 80 0.689.596.519.452.98 10.666.561.480.410.55 50.700.624.559.498.446 70 0.675.585.512.447.9 10.65.555.476.407.5 50.668.598.58.479.42 50 0.648.567.498.45.85 10.61.59.466.400.49 50.640.575.518.46.417 0 0.625.549.485.425.76 10.610.526.457.94.44 50.615.554.500.447.404 10 0.602.52.472.415.69 10.590.51.448.88.9 0 0.575.498.44.7.26 % Reflectance Room Cavity Ratio Eff. Ceil. Wall 6 7 8 9 10 50.41.7.9.12.275 80 0.55.18.285.258.222 10.16.280.246.221.187 50.405.68.4.08.271 70 0.52.14.28.256.222 10.12.277.245.221.187 50.92.56.24.299.264 50 0.45.07.277.252.217 10.09.274.24.219.185 50.80.45.16.291.257 0 0.8.0.272.247.214 10.06.270.241.217.18 50.69.7.07.28.251 10 0.1.298.267.244.210 10.01.267.28.215.181 0 0.289.255.226.20.170 1018 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

Photocells V2PC, D2S and EV2IH Series Cl. I, Div. 2, Groups A, B, C, D Maintains Cl. I, Div. 2 Suitability of Cooper Crouse-Hinds Champ Series Luminaires L The only UL recognized photocells for Class I, Division 2 areas. Eliminates the need for an explosionproof box! Cooper Crouse-Hinds factory-sealed, field installed photocells offer reliable, dusk-to-dawn lighting control in Class I, Division 2 locations. These photocells are ideal for walkways, security lighting, and any other outdoor lighting application that utilizes Champ H.I.D. lighting luminaires. Applications: Cooper Crouse-Hinds photocells are designed: To provide control for automatic dusk-to-dawn lighting. For safety by turning on outdoor luminaires in critical passageways at night. To save energy by operating luminaires only when necessary. For walkways, parking areas, outdoor process areas, security lighting, or any outdoor lighting application in Class I, Division 2 locations and corrosive environments. For use with LMV, DMV, VMV, VMV High Wattage, and FMV Series Champ lighting luminaires (V2PC Series). For use on 5 400 watt H.I.D., incandescent, or fluorescent lighting luminaires. For remote mounting in FS boxes (D2S Series). For mounting in EIH enclosures for Class I, Division 1 applications (EV2IH Series). Features: Field-installable. Solid-state design for performance and dependability. Factory sealed components. Explosionproof enclosure not required for Class I, Division 2 locations. Luminaires turn on at footcandles, off at 8 footcandles insuring that the luminaires are operating only when needed. Built-in 10 second time delay to eliminate nuisance tripping. Eight-year operating life. Furnished with 6" stranded 600 volt color coded wire leads. Constructed from corrosion-resistant thermoplastic polyester. Available on a DS cover for use with any FS/FD box (D2S Series). Available in an EIH enclosure for use in Class I, Division 1, Groups B*, C, and D locations (EV2IH Series). No seals required. *For Group B applications, seal within 1 1 /2" of enclosure in accordance with Section 501-5 of the National Electric Code. Certifications and Compliances: V2PC Series and D2S Series NEC/CEC: Class I, Division 2, Groups A, B, C, D UL Standard: 844 Hazardous (Classified) Locations CSA: C22.2 No. 55 EV2IH Series NEC/CEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1, Groups E, F, G Class II, Division 2, Groups F, G Class III NEMA:, 4, 7BCD, 9EFG UL Standard: 844 Hazardous (Classified) Locations CSA: C22.2 No. 0, 55 Electrical Rating Ranges: 120, 208, 220, 240, 277 VAC 50 / 60 Hz 5 400 watt H.I.D., incandescent, or fluorescent V2PC20.A max. current rating V2PC22 1.8A max. current rating V2PC27 1.4A max. current rating L www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2012 Cooper Crouse-Hinds 979

L Photocells V2PC, D2S and EV2IH Series Cl. I, Div. 2, Groups A, B, C, D Maintains Cl. I, Div. 2 Suitability of Cooper Crouse-Hinds Champ Series Luminaires Ordering Information: Photocell for field installation in lighting fixtures* Cat. # Voltage Range Current Rating V2PC20 120V, 50/60Hz.A V2PC22 208 240V, 50/60Hz 1.8A V2PC27 277V, 50/60Hz 1.4A Photocell in DS cover for use with FS/FD box Cat. # Voltage Range D2S20 120V, 50/60Hz D2S208 277 208V-277V Photocell in EIH enclosure for use in Class I, Division 1, Groups B, C, and D; Class II, Division 1, Groups E, F, and G; and Class III locations Cat. # Voltage Range EV2IH20 120V, 50/60Hz EV2IH208 277 208-277V 50/60Hz L Replacement Photocell for D2S Cover or EIH Enclosure * Cat. # Voltage Range Current Rating V2PCT20 120V, 50/60Hz 8.A V2PCT208 277 208V-277V 50/60Hz 4.81A -.61A depending on voltage * Must be factory installed in Canada. When mounting in EIH enclosures for Class I, Division 1 applications (EV21H Series) seals are not required for Groups C & D. Options: To order luminaire with photocell factory installed: 1. Specify luminaire dedicated supply voltage (not MT, DT, or TT) 2. Add photocell Cat. No. to fixture Cat. No. as follows: V2PC20 V2PC22 V2PC27 Example: VMVSJ070GP/120-V2PC20 is a 120V 60Hz luminaire with a factory installed photocell. Note: Only the V2PC is available as a factory installed photocell. 980 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds

Photocells V2PC, D2S and EV2IH Series Cl. I, Div. 2, Groups A, B, C, D Maintains Cl. I, Div. 2 Suitability of Cooper Crouse-Hinds Champ Series Luminaires L Dimensions: In Inches: V2PC EV2IH V2PCT D2S Cat. # a b c d e EV2IH 5.00 4.25 2.60 4.54 5.25 L www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 981

EVLS Hazard Gard Compact & Rugged, Class I, Zone 1, Div. 1 Explosionproof Luminaire Cl. I, Div. 1, Groups B (with suffix GB), C, D Cl. I, Zone 1, Group IIB + H2 (with suffix GB) Cl. II, Cl. III & Simultaneous Presence UL and cul Listed Wet locations (UL1598), Marine locations (UL1598A) Type 4X, IP66 Ordering Information High Pressure Sodium: PENDANT BULKHEAD Wattage Hub Size No Guard Wire Guard Cast Guard No Guard Wire Guard Cast Guard 50W 70W 100W 150W /4" EVLSA42050 EVLSA42051 EVLSA42052 EVLSBH42050 EVLSBH42051 EVLSBH42052 1" EVLSA4050 EVLSA4051 EVLSA4052 1 1 /2" 25 mm EVLSA425050 EVLSA425051 EVLSA425052 EVLSBH425050 EVLSBH425051 EVLSBH425052 2 mm EVLSA42050 EVLSA42051 EVLSA42052 /4" EVLSA42070 EVLSA42071 EVLSA42072 EVLSBH42070 EVLSBH42071 EVLSBH42072 1" EVLSA4070 EVLSA4071 EVLSA4072 1 1 /2" 25 mm EVLSA425070 EVLSA425071 EVLSA425072 EVLSBH425070 EVLSBH425071 EVLSBH425072 2 mm EVLSA42070 EVLSA42071 EVLSA42072 /4" EVLSA42100 EVLSA42101 EVLSA42102 EVLSBH42100 EVLSBH42101 EVLSBH42102 1" EVLSA4100 EVLSA4101 EVLSA4102 1 1 /2" 25 mm EVLSA425100 EVLSA425101 EVLSA425102 EVLSBH425100 EVLSBH425101 EVLSBH425102 2 mm EVLSA42100 EVLSA42101 EVLSA42102 /4" EVLSA42150 EVLSA42151 EVLSA42152 EVLSBH42150 EVLSBH42151 EVLSBH42152 1" EVLSA4150 EVLSA4151 EVLSA4152 1 1 /2" 25 mm EVLSA425150 EVLSA425151 EVLSA425152 EVLSBH425150 EVLSBH425151 EVLSBH425152 2 mm EVLSA42150 EVLSA42151 EVLSA42152 Complete catalog number as follows: Standard Voltage Ballasts NEC/UL CEC/CSA (cul) Export Voltage Multi-tap 120V 480V Tri-Tap 120V 208V CWI 240V CWI 480V CWI 600V CWI 220V 60 Hz 220V 50 Hz 240V 50 Hz Suffix /MT /120 /480 /TT /120 /208CWI /240CWI /480CWI /600CWI /220 /220 50 /240 50 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 989

EVLS Hazard Gard Compact & Rugged, Class I, Zone 1, Div. 1 Explosionproof Luminaire Cl. I, Div. 1, Groups B (with suffix GB), C, D Cl. I, Zone 1, Group IIB + H2 (with suffix GB) Cl. II, Cl. III & Simultaneous Presence UL and cul Listed Wet locations (UL1598), Marine locations (UL1598A) Type 4X, IP66 Ordering Information High Pressure Sodium (Cont'd): WALL CEILING Wattage Hub Size No Guard Wire Guard Cast Guard No Guard Wire Guard Cast Guard 50W 70W 100W 150W /4" EVLSBX42050 EVLSBX42051 EVLSBX42052 EVLSCX42050 EVLSCX42051 EVLSCX42052 1" EVLSBX4050 EVLSBX4051 EVLSBX4052 EVLSCX4050 EVLSCX4051 EVLSCX4052 1 1 /2" 25 mm EVLSBX425050 EVLSBX425051 EVLSBX425052 EVLSCX425050 EVLSCX425051 EVLSCX425052 2 mm EVLSBX42050 EVLSBX42051 EVLSBX42052 EVLSCX42050 EVLSCX42051 EVLSCX42052 /4" EVLSBX42070 EVLSBX42071 EVLSBX42072 EVLSCX42070 EVLSCX42071 EVLSCX42072 1" EVLSBX4070 EVLSBX4071 EVLSBX4072 EVLSCX4070 EVLSCX4071 EVLSCX4072 1 1 /2" 25 mm EVLSBX425070 EVLSBX425071 EVLSBX425072 EVLSCX425070 EVLSCX425071 EVLSCX425072 2 mm EVLSBX42070 EVLSBX42071 EVLSBX42072 EVLSCX42070 EVLSCX42071 EVLSCX42072 /4" EVLSBX42100 EVLSBX42101 EVLSBX42102 EVLSCX42100 EVLSCX42101 EVLSCX42102 1" EVLSBX4100 EVLSBX4101 EVLSBX4102 EVLSCX4100 EVLSCX4101 EVLSCX4102 1 1 /2" 25 mm EVLSBX425100 EVLSBX425101 EVLSBX425102 EVLSCX425100 EVLSCX425101 EVLSCX425102 2 mm EVLSBX42100 EVLSBX42101 EVLSBX42102 EVLSCX42100 EVLSCX42101 EVLSCX42102 /4" EVLSBX42150 EVLSBX42151 EVLSBX42152 EVLSCX42150 EVLSCX42151 EVLSCX42152 1" EVLSBX4150 EVLSBX4151 EVLSBX4152 EVLSCX4150 EVLSCX4151 EVLSCX4152 1 1 /2" 25 mm EVLSBX425150 EVLSBX425151 EVLSBX425152 EVLSCX425150 EVLSCX425151 EVLSCX425152 2 mm EVLSBX42150 EVLSBX42151 EVLSBX42152 EVLSCX42150 EVLSCX42151 EVLSCX42152 Complete catalog Standard Voltage Ballasts number as follows: NEC/UL CEC/CSA (cul) Export Voltage Multi-tap 120V 480V Tri-Tap 120V 208V 240V 480V 600V 220V CWI CWI CWI CWI 60 Hz 220V 50 Hz 240V 50 Hz Suffix /MT /120 /480 /TT /120 /208CWI /240CWI /480CWI /600CWI /220 /220 50 /240 50 990 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2012 Cooper Crouse-Hinds

EVLS Hazard Gard Compact & Rugged, Class I, Zone 1, Div. 1 Explosionproof Luminaire Cl. I, Div. 1, Groups B (with suffix GB), C, D Cl. I, Zone 1, Group IIB + H2 (with suffix GB) Cl. II, Cl. III & Simultaneous Presence UL and cul Listed Wet locations (UL1598), Marine locations (UL1598A) Type 4X, IP66 Ordering Information Pulse Start Metal Halide: Wattage Hub Size 150W 175W PENDANT BULKHEAD No Guard Wire Guard Cast Guard No Guard Wire Guard Cast Guard /4" EVLSA92150-S828 EVLSA92151-S828 EVLSA92152-S828 EVLSBH92150-S828 EVLSBH92151-S828 EVLSBH92152-S828 1" EVLSA9150-S828 EVLSA9151-S828 EVLSA9152-S828 1 1 /2" 25 mm EVLSA925150-S828 EVLSA925151-S828 EVLSA925152-S828 EVLSBH925150-S828 EVLSBH925151-S828 EVLSBH925152-S828 2 mm EVLSA92150-S828 EVLSA92151-S828 EVLSA92152-S828 /4" EVLSA92170-S828 EVLSA92171-S828 EVLSA92172-S828 EVLSBH92170-S828 EVLSBH92171-S828 EVLSBH92172-S828 1" EVLSA9170-S828 EVLSA9171-S828 EVLSA9172-S828 1 1 /2" 25 mm EVLSA925170-S828 EVLSA925171-S828 EVLSA925172-S828 EVLSBH925170-S828 EVLSBH925171-S828 EVLSBH925172-S828 2 mm EVLSA92170-S828 EVLSA92171-S828 EVLSA92172-S828 Ordering Information Pulse Start Metal Halide: Wattage Hub Size 150W 175W WALL CEILING No Guard Wire Guard Cast Guard No Guard Wire Guard Cast Guard /4" EVLSBX92150-S828 EVLSBX92151-S828 EVLSBX92152-S828 EVLSCX92150-S828 EVLSCX92151-S828 EVLSCX92152-S828 1" EVLSBX9150-S828 EVLSBX9151-S828 EVLSBX9152-S828 EVLSCX9150-S828 EVLSCX9151-S828 EVLSCX9152-S828 1 1 /2" 25 mm EVLSBX925150-S828 EVLSBX925151-S828 EVLSBX925152-S828 EVLSCX925150-S828 EVLSCX925151-S828 EVLSCX925152-S828 2 mm EVLSBX92150-S828 EVLSBX92151-S828 EVLSBX92152-S828 EVLSCX92150-S828 EVLSCX92151-S828 EVLSCX92152-S828 /4" EVLSBX92170-S828 EVLSBX92171-S828 EVLSBX92172-S828 EVLSCX92170-S828 EVLSCX92171-S828 EVLSCX92172-S828 1" EVLSBX9170-S828 EVLSBX9171-S828 EVLSBX9172-S828 EVLSCX9170-S828 EVLSCX9171-S828 EVLSCX9172-S828 1 1 /2" 25 mm EVLSBX925170-S828 EVLSBX925171-S828 EVLSBX925172-S828 EVLSCX925170-S828 EVLSCX925171-S828 EVLSCX925172-S828 2 mm EVLSBX92170-S828 EVLSBX92171-S828 EVLSBX92172-S828 EVLSCX92170-S828 EVLSCX92171-S828 EVLSCX92172-S828 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 99

EVLS Hazard Gard Compact & Rugged, Class I, Zone 1, Div. 1 Explosionproof Luminaire Cl. I, Div. 1, Group B (with suffix GB), C, D Cl. I, Zone 1, Group IIB + H2 (with suffix GB) Cl. II, Cl. III & Simultaneous Presence UL and cul Listed Wet locations (UL1598) Marine locations (UL1598A) Type 4X, IP66 Ordering Information Metal Halide (Cont'd): Wattage 70W 100W 175W STANCHION ADAPTER Hub Size No Guard Wire Guard Cast Guard No Guard Wire Guard Cast Guard Luminaire less mounting module and guard Adapter EVLSM9070 EVLSM9071 EVLSM9072 EVLS9070 1 1 /2" EVLSJ95070 EVLSJ95071 EVLSJ95072 Adapter EVLSM9100 EVLSM9101 EVLSM9102 EVLS9100 1 1 /2" EVLSJ95100 EVLSJ95101 EVLSJ95102 Adapter EVLSM9170 EVLSM9171 EVLSM9172 EVLS9100 /4" EVLS9170 1 1 /2" EVLSJ95170 EVLSJ95171 EVLSJ95172 Complete catalog number as follows: Standard Voltage Ballasts NEC/UL CEC/CSA (cul) Export Voltage Multi-tap 120V 480V Tri-Tap 120V 208V CWI 240V CWI 480V CWI 600V CWI 220V 60 Hz 220V 50 Hz 20V* 50 Hz 240V 50 Hz Suffix /MT /120 /480 /TT /120 /208CWI /240CWI /480CWI /600CWI /220 /220 50 /20 50 /240 50 *Available for 175W only. EVLS Metal Halide: Fixture with Globe and Domed Reflector (less guard) EVLSA92170RD725 Lamp: 150W/ED17 Metal Halide (MH) www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 997