Дизельныйе молоты Diesel Pile Hammer

Дизельныйе молоты Diesel Pile Haer Технические характеристики - Technical data

D6- до D19-42 Дизельный молот Технические характеристики D6- D8-22 D12-42 D16- D19-42 Ударный вес (поршень) Энергия удара Кол-во ударов Для забивки забивных свай (в зависимости от грунта и свай) кнм мин -1 600 19-9 38-52 300-00 27-13 36-52 500-3000 1280 46-35-52-5000 1600 54-25 36-52 1000-6000 18 66-29 35-52 1100-6000 Расход Дизельное топливо Смазка Объём бака Дизельный бак Бак для смазки л/ч л/ч л л 3,7 0,25 19 5 4 0,5 6 4,5 0,5 25 6,5 5 0,5 9 7,5 0,5 9 Макс. толщина каната для опционального направляющего ролика разъединяющего механизма Вес Разъединяющий механизм Дизельный молот 16 1935 2735 36 3840 Макс. наклон забивки без / с удлинением 1:3 / - 1:2 / - Габариты A Общая длина дизельного молота без удлинения B Внешний радиус ударной части 4300 350 4700 350 4770 400 5160 440 5160 440 C Ширина дизельного молота D Ширина узла соединения для направляющих щёчек 465 3 410 3 440 3 480 3 480 3 От середины молота до защитного корпуса насоса От середины дизельного молота до середины направляющих щёчек G Глубина дизельного молота H Минимальное расстояние от середины до переднего края копра 310 245 590 3 315 245 590 3 335 245 610 340 345 280 700 355 345 280 700 360 G C D A H 2 DLMAG 08/10. Возможны изменения. B

Diesel Pile Haer D6- to D19-42 Technical data D6- D8-22 D12-42 D16- D19-42 Impact weight (piston) nergy per blow Number of blows Suitable for driving piles (depending on soil and pile) knm min -1 600 19-9 38-52 300-00 27-13 36-52 500-3000 1280 46-35-52-5000 1600 54-25 36-52 1000-6000 18 66-29 35-52 1100-6000 Consumption Diesel oil Lubricant Tank capacity Diesel oil tank Lube tank l/h l/h l l 3,7 0,25 19 5 4 0,5 6 4,5 0,5 25 6,5 5 0,5 9 7,5 0,5 9 Max. rope diameter for deflector sheave of tripping device Weight Tripping device Diesel pile haer 16 1935 2735 36 3840 Max. inclined pile driving without / with extension 1:3 / - 1:2 / - Dimensions A Length of diesel pile haer without extension B Outer diameter of impact block 4300 350 4700 350 4770 400 5160 440 5160 440 C Width of diesel pile haer D Width for connection of guide jaws 465 3 410 3 440 3 480 3 480 3 Center of haer to pump guard Center of haer to center of threads for guide jaw bolts G Depth of diesel pile haer H Standard distance from center of diesel pile haer up to the face of lead 310 245 590 3 315 245 590 3 335 245 610 340 345 280 700 355 345 280 700 360 G C D A H DLMAG 08/10. Subject to changes. B 3

D25- до D46- Дизельный молот Технические характеристики D25- D30- D36- D46- Ударный вес (поршень) Энергия удара Кол-во ударов Для забивки забивных свай (в зависимости от грунта и свай) кнм мин -1 2500 90-40 35-52 1600-7500 3000 103-48 36-52 00-9000 3600 123-56 36-53 2500-100 4600 166-71 35-53 3000-16000 Расход Дизельное топливо Смазка Объём бака Дизельный бак Бак для смазки л/ч л/ч л л 7,5 0,6 67 19 10 1 67 19 11,5 1,5 89 17 16 1,5 89 17 Макс. толщина каната для опционального направляющего ролика разъединяющего механизма 22 22 38 38 Вес Разъединяющий механизм Дизельный молот 186 5670 186 6170 450 80 450 9300 Макс. наклон забивки без / с удлинением Габариты A Общая длина дизельного молота без удлинения B Внешний радиус ударной части 5500 560 5500 560 5470 660 5470 660 C Ширина дизельного молота D Ширина узла соединения для направляющих щёчек 670 540 670 540 640 640 От середины молота до защитного корпуса насоса От середины дизельного молота до середины направляющих щёчек G Глубина дизельного молота H Минимальное расстояние от середины до переднего края копра 405 235 780 435 405 235 780 435 445 275 950 500 445 275 950 500 G C D A H 4 DLMAG 08/10. Возможны изменения. B

Diesel Pile Haer D25- to D46- Technical data D25- D30- D36- D46- Impact weight (piston) nergy per blow Number of blows Suitable for driving piles (depending on soil and pile) knm min -1 2500 90-40 35-52 1600-7500 3000 103-48 36-52 00-9000 3600 123-56 36-53 2500-100 4600 166-71 35-53 3000-16000 Consumption Diesel oil Lubricant Tank capacity Diesel oil tank Lube tank l/h l/h l l 7,5 0,6 67 19 10 1 67 19 11,5 1,5 89 17 16 1,5 89 17 Max. rope diameter for deflector sheave of tripping device 22 22 38 38 Weight Tripping device Diesel pile haer 186 5670 186 6170 450 80 450 9300 Max. inclined pile driving without / with extension Dimensions A Length of diesel pile haer without extension B Outer diameter of impact block 5500 560 5500 560 5470 660 5470 660 C Width of diesel pile haer D Width for connection of guide jaws 670 540 670 540 640 640 Center of haer to pump guard Center of haer to center of threads for guide jaw bolts G Depth of diesel pile haer H Standard distance from center of diesel pile haer up to the face of lead 405 235 780 435 405 235 780 435 445 275 950 500 445 275 950 500 G C D A H DLMAG 08/10. Subject to changes. B 5

D62-22 до D0-42 Дизельный молот Технические характеристики D62-22 D80-23 D100-13 D150-42 D0-42 Ударный вес (поршень) Энергия удара Кол-во ударов Для забивки забивных свай (в зависимости от грунта и свай) 60 кнм 224-107 мин -1 35-50 4-30 0 288-171 35-45 6-60 10000 360-214 35-45 7-100 15000 512-9 36-45 12-160 000 682-436 36-45 14-250 Расход Дизельное топливо Смазка Объём бака Дизельный бак Бак для смазки л/ч л/ч л л 2 98 31,5 25 2,6 155 30 2,6 155 50 4,8 310 45 60 5,8 430 80 Макс. толщина каната для опционального направляющего ролика разъединяющего механизма (*с переброшенным через ролик канатом) 38 30* 30* 36* 36* Вес Разъединяющий механизм Дизельный молот 450 12250 750 16905 750 7 1850 28450 1850 51 Макс. наклон забивки без / с удлинением 1:2 / 1:1 1:5 / 1:2 1:5 / 1:2 1:5 / 1:2 1:5 / 1:3 Габариты A Общая длина дизельного молота без удлинения B Внешний радиус ударной части 5910 710 70 8 7358 8 7490 990 8175 1250 C Ширина дизельного молота D Ширина узла соединения для направляющих щёчек 560 890 890 1280 1110 1425 1425 От середины молота до защитного корпуса насоса От середины дизельного молота до середины направляющих щёчек G Глубина дизельного молота H Минимальное расстояние от середины до переднего края копра 490 380 970 500 550 350 1110 660 550 350 1110 660 7 375 1450 900 730 580 1890 1050 G C D A H 6 DLMAG 08/10. Возможны изменения. B

Diesel Pile Haer D62-22 to D0-42 Technical data D62-22 D80-23 D100-13 D150-42 D0-42 Impact weight (piston) nergy per blow Number of blows Suitable for driving piles (depending on soil and pile) knm min -1 t 60 224-107 35-50 4-30 0 288-171 35-45 6-60 10000 360-214 35-45 7-100 15000 512-9 36-45 12-160 000 682-436 36-45 14-250 Consumption Diesel oil Lubricant Tank capacity Diesel oil tank Lube tank l/h l/h l l 2 98 31,5 25 2,6 155 30 2,6 155 50 4,8 310 45 60 5,8 430 80 Max. rope diameter for deflector sheave of tripping device (* reeved twice) 38 30* 30* 36* 36* Weight Tripping device Diesel pile haer 450 12250 750 16905 750 7 1850 28450 1850 51 Max. inclined pile driving without / with extension 1:2 / 1:1 1:5 / 1:2 1:5 / 1:2 1:5 / 1:2 1:5 / 1:3 Dimensions A Length of diesel pile haer with extension (standard) B Outer diameter of impact block 5910 710 70 8 7358 8 7490 990 8175 1250 C Width of diesel pile haer D Width for connection of guide jaws 560 890 890 1280 1110 1425 1425 Center of haer to pump guard Center of haer to center of threads for guide jaw bolts G Depth of diesel pile haer H Standard distance from center of diesel pile haer up to the face of lead 490 380 970 500 550 350 1110 660 550 350 1110 660 7 375 1450 900 730 580 1890 1050 G C D A H DLMAG 08/10. Subject to changes. B 7

08/10 DLMAG GmbH & Co. KG, sslingen. Все права защищены. All rights reserved! Marken der Brands of Дальнейшую информацию Вы можете получить у Вашего продавца DLMAG продукции, или посетив наш сайт: www.delmag.de. DLMAG оставляет за собой право вносить изменения в конструкцию и в комплектацию оборудования. Материалы данного проспекта следует рассматривать как обще-информативные. Рисунки также могут содержать прочее навесное оборудование, которое не относится к серийным поставкам. or further information please contact your DLMAG sales assistant. Or visit us on the Internet at www.delmag.de. Design subject to modifications. The details in this leaflet have to be regarded as approximate. The illustrations also can contain options which are not part of the standard scope of supply. DLMAG GmbH & Co. KG Tel.: +49 (0) 711 3100-0 Max-Planck-Str. 3 ax: +49 (0) 711 3100-254 73730 sslingen email: info@delmag.de Germany Web: www.delmag.de www.abi-group.com

DLMAG Pile Driving quipment Technical data

History and Today DLMAG 2500 rog (1939). 16 DLMAG lead systems working on a jobsite in mden, Germany (1952). DLMAG was established in 1922 and has been manufacturing construction equipment since 1927, when DLMAG introduced the patented combustion powered impact haers. In the following years different types of haers and compactors were developed, like the frog with a weight of 2500 as shown above. In 1940 the first D 5 diesel pile haer (piston weight of 500 ), was built, working after the principle of impact atomization. These haers were self-contained and therefore they did not need an additional power pack. The diesel pile haers of our day still work on the same, yet refined, principle. In order to round up the product line, DLMAG started to manufacture a variety of lead systems and accessories in the 1950 s. Today DLMAG manufactures diesel pile haers from sizes D 6 (600 piston weight) up to D 0 with a piston weight of.000. DLMAG also builds a variety of hanging, swinging or offshore leads fitting any size of haer and any jobsite situation. Additionally DLMAG offers different types of lead and haer accessories like hydraulic starting devices, power packs, drive caps, etc. DLMAG diesel pile haer D0-42 driving 84 pipe piles in Caspian Sea DLMAG diesel pile haer D62-22 on hanging lead MH 7 in Belgium DLMAG diesel pile haer D46- on piling rig BANUT 655 in Slovenia 2

Diesel Pile Haer DLMAG diesel pile haers are single acting free fall haers utilizing the principle of impact atomization. The diesel pile hamer consists of upper and lower cylinder in which the piston is led. The haer is equipped with a rope controlled adjustable fuel pump with 4 settings. This serves to regulate the stroke of the piston and therefore the impact energy. This is a particular advantage when soil formations change. Optionally a hydraulically actuated fuel pump with infinite settings is available. The maximum stroke of a piston is up to 3.7 m, depending on soil conditions. The diesel pile haer utilizes a tripping device to lift the piston and start the haer. Usually the tripping device is lifted with a wire rope. In any case where no wire rope is present a hydraulic tripping device is available. Since diesel pile haers do not have any piston rods, crankshafts, cams or bearings they do have little wear and are very reliable. They are almost maintenance free and can be used on different pile types like concrete piles, H-beams, sheet piles, etc. Other advantages are the unmatched ratio of total weight to impact energy (which allows the use of lighter rigs) and the extremely low fuel consumption. The rugged design, the reliability and the low maintenance and operating costs have convinced thousands of customers around the world that a DLMAG diesel pile haer is always the right choice. Tripping device Guide gibs for tripping device Piston Guide parts for pile haer xhaust port Impact block Pile helmet Guiding for pile helmet Pile xtension for upper cylinder Upper cylinder uel and lubrication tanks Lubrication pump uel pump Lower cylinder Haer cushion Delmag diesel pile haer D 30- for batter piling up to 1:1 (45 ) 3

Diesel Pile Haer How the diesel pile haer works? 1. Lifting of the piston (starting) To start the diesel pile haer the piston is lifted by means of a mechanical or hydraulical tripping device and is automatically released at a given height. 1. 2. 3. 4. 5. 2. Injection of diesel fuel and compression While dropping, the piston actuates the pump lever, so that a certain quantity of diesel fuel is sprayed on top of the impact block. After passing the exhaust ports, the piston starts compressing the air in the combustion chamber. 3. Impact and Combustion The impact of the piston on the impact block atomizes the diesel fuel in the combustion chamber. The atomized fuel ignites in the highly compressed air. The combustion energy moves the piston upwards. 4. xhaust While moving upwards, the piston passes and thus opens the exhaust ports. The exhaust gases escape and the pressure in the cylinder is equalized with the atmosphere. 5. lushing As the piston continues to move upwards, fresh air is drawn through the exhaust/intake ports for flushing the cylinder while also releasing the pump lever. The pump lever returns to its starting position and the pump is charged with fuel again. Delmag diesel pile haers operate on the principle of impact atomization. Three different energies are acting on the pile: Compression + Impact + Combustion which are united to an effective cumulative energy. The compression energy will force the impact block with the helmet tightly against the butt of the pile. The next blow will then encounter a preloaded pile. Thus the pile head is protected and the impact energy is effectively transmitted onto the entire pile. On piles sensitive to stress, the risk of cracks will be reduced, since the tension imposed on the pile relaxes in upward direction and is retarded by the pressure of the expanding gases. 4

Hanging Leads Leads MH 12 MH 3003 MH 64 MH 7 Suitable diesel pile haer (max. size) D12-42 D30- D62-22 D80-23 Max. length of the lead system Max. usable length (with max. size haer) m m 14 28 22 26 30 22 Weight cpl. in * 3000 6000 0 100 Recoended carrier (lifting capacity) t 40 50 100 1 * at max. length, without haer and without slewing device and a lowering system DLMAG hanging leads can easily be attached to the boom point of crawler cranes. Usually a spotter, which connects the lower part of the Lead with the upper carriage of the crane, is used to control the mast inclinations to the front, rear or side. Optionally a hydraulic mast slewing device and a hydraulic mast lowering system are available. Hanging lead MH 64 with diesel pile haer D30- at the Dortmund -ms channel in Germany 5

Rope Suspended Leads DLMAG U-type offshore leads guide the haer in riding-haer applications, such as driving of single piles (pipe piles, king piles, etc.). or inclined pile driving (max. 1:4) a hydraulic tripping device is recoended. Leads U 62-36 U 62-42 U 100-48 U 100-60 U 150-60 U 0-60 U 0-84 Suitable diesel pile haer (max. size) D62-22 D62-22 D100-13 D100-13 D150-42 D0-42 D0-42 Max. pipe diameter 915 1076 12 1524 1524 1524 2135 Weight of lead system without haer 7300 80 9300 00 17000 28500 400 Rope suspended lead U 62-42 with diesel pile haer D62-22 in ngland Rope suspended lead MAS 3000 with diesel pile haer D25- in Russia 6 Leads MAS 3000 MAS 4600 MAS 60 Suitable diesel pile haer Max. pile diameter Max. pile weight Weight of lead system without haer D25- D30-1067 3600 4400 D36- D46-1067 5000 4600 D62-22 12 7000 5600 DLMAG MAS-type rope suspended leads are designed to drive various types of vertical piles, such as interlockking sheet piles and single piles.

Swinging Leads DLMAG swinging leads can be attached to any model of crane with the proper capacity. Since the Lead is not connected to the crane s upper carriage, it can be rotated 360 around its vertical axis. Leads MS 12 MS 3003 MS 64 Suitable diesel pile haer (max. size) Length of the lead system Usable length (with max. size haer) m m D12-42 8-2 - 14 D30-8 - 28 2-22 D62-22 10-30 4-24 DLMAG MS-type swinging leads are mainly used for backdriving of interlocking sheet piles and single piles. Weight of lead system at max. length, without haer 00 4000 5500 Swinging lead MS 3003 with DLMAG diesel pile haer D25- in Germany Swinging lead MU 60 with DLMAG diesel pile haer D36- in the USA Leads MU 1900 MU 3000 MU 60 Suitable diesel pile haer (max. size) Max. length of the lead system Max. usable length (with max. size haer) m m D19-42 30 22 D30-30 22 D62-22 30 The typical application for DLMAG MU-type swinging leads is driving of single piles (concrete piles, steel piles, etc.). Weight of lead system at max. length, without haer 4000 6000 6600 7

ebruary 10 DLMAG GmbH & Co. KG, sslingen. All rights reserved! Marken der Brands of or further informations please contact your DLMAG sales assistant. Or you visit us on the Internet at www.delmag.de. Design subject to modifications. The details in this leaflet have to be regarded as approximate. The illustrations also can contain special outfits which are not part of the standard scope of supply. DLMAG GmbH & Co. KG Tel.: +49 (0) 711 3100-0 Max-Planck-Str. 3 ax: +49 (0) 711 3100-254 73730 sslingen email: info@delmag.de Germany Web: www.delmag.de www.abi-group.com