30 FMM 050
SRIS FMM 050 Working pressure 0 bar Style S Style Style T Style D 3
3 Technical data Filter body (Materials) Head: Cast iron (chemical heat treatment) Housing: Steel (chemical heat treatment) ypass valve: Steel Pressure Working pressure: 0 bar ( MPa) Test pressure: 0 bar ( MPa) urst pressure: 80 bar (8 MPa) Pulsed pressure fatigue test,000,000 of cycles with variable pressure from 0 to 0 bar ( MPa) Temperature From -5 C to +0 C ypass valve Opening pressure 6 bar ±0% Other opening pressures on request. lements type Δp Microfibre filter elements series N: 0 bar Microfibre filter elements series H: 0 bar Stainless steel mesh elements series N: 0 bar Oil flow from exterior to interior. Seals Standard Nitrile (NR) series Optional FPM series V Weights without filter elements (kg) FMM050-.6 FMM050-3.6 FMM050-3 3.9 FMM050-.5 FMM050-5 6. Filter internal volumes (dm 3 ) FMM050-0.38 FMM050-0.8 FMM050-3 0.58 FMM050-0.69 FMM050-5 0.86 Connections In-line Inlet/Outlet Compatibility odies compatible with: Mineral oils to ISO 93 - aqueous emulsions synthetic fluids, water/glycol. Filter elements compatible with: Mineral oils to ISO 93 - aqueous emulsions synthetic fluids, water/glycol. Nitrile (NR) seals series, compatible with: Mineral oils to ISO 93 - aqueous emulsions synthetic fluids, water/glycol. V series FPM seals, compatible with: Synthetic fluids type HS-HFDR-HFDS-HFDU To ISO 93 Filter lement rea Filter element in stainless steel mesh Type 3 5 HP050,50,00 0,50 0,00 5 0 5 0 Δp bar 50 700 000 300 00 Values expressed in cm Pressure drops Δp Housing The curves are plotted using mineral oil with density of 0.86 kg/dm 3 to ISO 3968. Δp varies proportional with density. Δp bar Δp bar / 3/ 0 30 60 90 0 50 0 30 60 90 0 50 Flow rate I/min,50 3,00,50 Filter Housing Flow rate I/min ypass valve pressure drops Filter housing with check valve 0,00 0 0 0 60 80 00 Flow rate I/min
FMM 050 H 3 00 7,5 5 Nr. 3 holes 90 Ø 68 60,6 Ch. 30 With standard indicator Indicator connection Plug T Ch. 30 5 Indicator Position PLUG T Ch. 30 Dimensions Recommended maximum flow rate - Pressure drop of complete filter equal to Δp.5 bar. - Oil kinematic viscosity 30 mm /s (cst). - Density 0.86 kg/dm 3. - Connections of filter under test G 3/. Filter Flow rate Flow rate Filter element l/min l/min type Series N Series H 03 30 06 0 0 80 58 6 8 60 5 0 75 M5 0-03 53 5 06 58 50 0 87 78 6 00 90 5 5 9 M5 0-03 68 59 06 7 6 0 00 9 3 6 0 00 5 35 30 M5 0-03 85 75 06 9 8 0 8 06 6 0 5 35 35 M5 5-03 0 9 06 98 0 30 5 6 35 0 5 0 0 M5 5 - Option P03 with indicator at 90 Threaded Connections 8X,5 ISO 69 Depth 5 mm M0 X,5 ISO 69 M0 G / M0 7,5 5 55 98 G 3/ / NPT 3/ NPT S 8 (3/ - 6 UNF) M0 Nr. 3 holes 60,6 Indicator Position PLUG T Ch. 30 S ( /6 - UN) Filter H mm 58 95 3 37 Note. Differential indicator versions are supplied with plug T. 5 85 07 33
Spare par ts FMM050 P0 3e 3d P03 3a 3b 3c 3f Pos. Description Qty. FMM 050 series FILTR 050 - - 3 - - 5 Complete filter See order table Filter lement See order table 3 Seal kits NR FPM 00503 005035 3a O-Ring for filter element OR 3093 Ø 3.67 x.6 3b O-Ring for housing OR 35 Ø 56.8 x.6 3c 3d 3e 3f nti-extrusion ring Gasket O-Ring Protection seal Parbak 39 Ø 56.03 x.8 0030058 003006 (HNR) (FPM) OR 050 Ø. x.78 0065 Indicator plug TH TV - Indicator See order table 3
Filter assembly FMM 050 Filter element HP 050 3 5 6 5 3 6 xample: HP050 0 N P0 Ordering information FMM050 xample: HP050 C 0 N P0 7b 7a - Filter lengths 3 5 5 - Filter elements 03 Inorganic microfibre 3 µ 06 Inorganic microfibre 6 µ 0 Inorganic microfibre 0 µ 6 Inorganic microfibre 6 µ 5 Inorganic microfibre 5 µ ßx (c) 000 see page 0 - ypass valve M5 Stainless steel mesh 5 µ (N style only) S T Without bypass With bypass Without bypass + check valve* 6 - Filter elements differential pressure N 0 bar S 0 bar D 3 - Seals With bypass + check valve* *Reduced cross-section oilways 7 - Options a) Filter P0 Standard threaded connection for indicator NR P0 Without threaded connection for indicator V FPM P03 Threaded connection for indicator at 90 - Threaded connections Pxx Customer request M8X.5 ISO 69 b) Filter element MX.5 ISO 69 C G / P0 Pxx MP Filtri standard Customer request D G 3/ DIFFRNTIL INDICTORS (see page 5) F G H / NPT 3/ NPT S 8 (3/ - 6 UNF) S ( /6 - UN) MP Filtri - The filter functions as described in this bulletin are valid exclusively for original MP Filtri filter elements and replacement parts. ll rights reserved The data in this publication is marketing information. MP Filtri reserves the right to make changes to the product described herein at any time it deems fit in relation to technical or commercial requirements. The colors of the products shown on the cover are for illustration purposes only. Copyright. ll rights reserved. 35