BODY SHOP FASTENERS ATTACHES À CARROSSERIE FASTENERS AN INTRODUCTION TO... UNE INTRODUCTION.

AN INTRODUCTION TO... BODY SHOP FASTENERS ATTACHES À CARROSSERIE UNE INTRODUCTION. For a full listing of Papco Body Shop Fasteners, please refer to our current catalogue or visit our website to download a PDF version. SPEED CLIPS & NUTS PALNUTS RETAINERS PUSHNUT METRIC FASTENERS U NUTS (MULTI & SINGLE THREADS) BODY BOLTS BUMPER BAR BOLTS CONELOK LOCKNUTS LICENCE PLATE BOLTS MOULDING BOLTS & CLIPS RIVETS GLASS SHOP FASTENERS TRIM FASTENERS WEATHERSTRIP FASTENERS ANCHOR NUTS & CLIPS PLUG BUTTONS SHIMS HINGE PINS & BUSHINGS BLIND WELL NUTS SERT-A-NUTS

FLAT TYPE SPEED NUTS ÉCROUS TENIR TYPE FRAISÉE 240 Used with machine screws and sheet metal screws. One piece, heat treated spring steel self-locking fastener. The original equipment fastener used on headlights, radiators, moulding, trim, gravel deflectors, ornaments, emblems, name plates, etc. FLAT TYPE Standard Package: Contains 00 Pieces 240-089 240-00 240-09 240-0 240-20 240-59 240-08 240-27 ILLUSTRATIONS ARE APPROXIMATE Stock No. Screw Size Dimensions A x B x T Other No. Application 240-089 -32 /2 x 5/ x.07 2089 General Purpose. 240-09 -32 7/8 x /2 x.07 898 Chrysler products garnish moulding ornament. 240-00 8-32 /2 x 5/ x.07 209 General Purpose. 240-0 8-32 7/8 x /2 x.07 899 Chrysler products radiator and trunk medallion. 240-20 0-24 3/4 x 7/ x.022 2092 General Purpose. 240-59 /4-20 x 9/ x.027 903 General Purpose. 240-08 No. 8 5/8 x /32 x.03 3793 For sheet metal screws. 240-27 No. 0 7/8 x /2 x.03 900 For sheet metal screws, and radiator grille. GARAGE ASSORTMENT No. 020-05 Contains 8 sizes of Flat Type Speed Nuts, 0 pieces. Packed in handy, clear plastic box, with moulded compartments. 34 H. Paulin & Co., a division of The Hillman Group Canada ULC

FORMED TYPE SPEED NUTS ÉCROUS TENIR TYPE FORME 240 Used with machine screws and sheet metal screws. Two types, U and J. Press into locked on position over panel edge or in centre-panel location. Holds itself in screw receiving position. J Types U Types 240-243 240-23 240-22 240-228 240-232 240-242 240-247 240-250 240-2 240-27 240-28 240-274 240-27 240-278 ILLUSTRATIONS ARE APPROXIMATE Standard Package Contains 00 Pieces Stock No. Screw Size Type Dimensions A x B x T Other No. Application 240-243 0-24 U 4/4 x 7/ x.020 597 General Purpose. 240-23 /4-20 U 3/4 x /2 x.025 2293 Licence Plate attaching nut. For Sheet Metal Screws 240-22 No. 8 U 3/4 x /2 x.028 379 Chevrolet Headlamp adj. nut, radiator grille assembly. 240-228 No. 8 U 4/4 x 7/ x.028 0 Ford quarter trim to panel. 240-232 No. 8 U 3/4 x 7/ x.029 292 General purpose. 240-242 No. 0 J x /2 x.035 834 General purpose. 240-247 No. 0 J 5/32 x / x.03 2303 Chevrolet Headlamp to fender. 240-250 No. 0 U 3/4 x /2 x.03 2422 Ford radiator grille. 240-2 No. 2 U 7/8 x 9/ x.034 90 General purpose. 240-27 No. 4 J 7/8 x 9/ x.034 2420 Oldsmobile. front fender radiator to grille 3/32 panel. 240-28 No. 4 J 7/8 x 9/ x.034 2057 Oldsmobile. Pontiac, fender and radiator 3/4 panel. 240-274 /4-20 J 7/8 x 5/8 x.300 558 General purpose J Type Cage Nut 240-27 5/-8 J -/ x 3/4 x.300 5589 General purpose J Type Cage Nut 240-278 3/8- J -/8 x 3/4 x.300 570 General purpose J Type Cage Nut GARAGE ASSORTMENT No. 020-0 Contains 8 sizes of U and J Formed Type Speed Nuts, 5 pieces. Packed in handy, clear plastic box with compartments..800.28.4000 www.hpaulin.com 35

PUSH-ON TYPE SPEED NUTS ÉCROUS TENIR TYPE POUSSÉE 240 For use on studs, rivets and other unthreaded parts. Teeth bite inward and arched shape provides secure spring grip. FLAT TYPE 240-30 240-320 240-325 240-33 240-355 240-335 240-340 240-345 240-350 240-35 ILLUSTRATIONS ARE APPROXIMATE 240-370 Standard Package Contains 00 Pieces Stock No. Screw Size Dimensions A x B x T Other No. Application 240-30 / 25/4 x 7/32 x.02 2098 Buick seat trim, Chrysler name plate. 240-320 3/32 7/ x 7/32 x.07 200 For Hardened Studs, Pontiac name plate. 240-325.00 29/4 x 5/4 x.04 90 General Purpose. 240-33 /8 3/8 x /32 x.09 3559 General Purpose. 240-335 /8 37/4 x 5/ x.02 2099 General Purpose. 240-340 5/32 3/4 x 7/ x.020 905 General Purpose. 240-345 5/32 9/ x 3/8 x.02 202 General Purpose. 240-350 3/ 5/8 x 3/8 x.07 203 Ford products name plate, ornament. 240-355 /4 4/4 x 7/ x.07 205 General Purpose. 240-35 5/ 3/4 x 7/32 x.020 338 General Purpose. 240-370 3/8 3/ x 5/8 x.020 339 General Purpose. GARAGE ASSORTMENT No. 020-07 Contains 7 sizes of Push-On Type Speed Nuts, 0 pieces. Packed in a rigid clear plastic container with handy compartments. 3 H. Paulin & Co., a division of The Hillman Group Canada ULC

TUBULAR TYPE SPEED CLIPS ÉCROUS TENIR TYPE À TUBE 240 TUBULAR TYPE Used on unthreaded studs and rivets where there is access to only one side of the assembly. Insert speed clips into hole causing cam-like side prongs to snap and hold clip in proper position. Push rivet end into clip causing turned-in end of clip to bite rivet and lock it securely. Standard Package: contains 00 Pieces 240-430 240-43 240-432 240-47 ILLUSTRATIONS ARE APPROXIMATE Stock No. Stud Dia. Panel Range Fits Hole Other No. OEM No. 240-430 /8.030 -.03 5/32 2 240-43 /8.040 -.045 3/ 2595 240-432 /8.03 -.04 /4 595 375480-S00, 3783794 240-47 3/.038 -.044 7/32 0073 000558 GARAGE ASSORTMENT No. 020-08 Contains 4 sizes of Tubular Speed Clips, for studs, 70 pieces. Packed in clear plastic container with easy to use compartments. 020-08 UTILITY ASSORTMENTS No. 020-35 FLAT TYPE 8 sizes for Machine and Sheet Metal Screws, 325 pieces. No. 020-3 FORMED TYPE 0 sizes, U and J types for Machine and Sheet Metal Screws, 0 pieces. No. 020-37 PUSH-ON & TUBULAR 4 sizes for unthreaded Studs, 275 pieces. 020-35 020-3 020-37 All Papco Utility Assortments are packed in sturdy fibreboard metal-edged boxes with individual compartments and with illustrated labels showing parts and prices..800.28.4000 www.hpaulin.com 37

SPEED NUT MASTER ASSORTMENTS ASSORTIMENTS D ÉCROUS TENIR No. 020-43 For unthreaded studs. Contains 3 Sizes Tubular Speed Clips. 4 Sizes Push-On Speed Nuts. 477 pieces selected according to popularity. Name plates, emblems, moulding clips are held with Tubular Speed Clips and Push-on Speed Nuts. These kits will service every need that will come up in your shop. 020-43 No. 020-44 For machine and sheet metal screws. Contains 8 Sizes Flat Type Speed Nuts, Sizes Formed Type Speed Nuts 42 pieces balanced for popularity. Every year more and more Speed Nuts are used for Original Equipment attachments. These handy kits contain the Speed Nuts that are most frequently replaced on all makes of cars. Size: 9-34 W x 3-3/4 L x 2 D. 020-44 SPEED NUT SUPER-SERVICE ASSORTMENT ASSORTIMENT DE SUPER-SERVICE D ÉCROUS TENIR No. 020-80 Ideal for Dealers, Jobbers and large users. This popular assortment contains a wide range of Flat Push-on and Formed Type Speed Nuts carefully selected in balanced quantities. Size: 2 W x 8 L x D. Contains 85 Speed Nuts in Flat, Push-on and Formed Types 32 sizes. Large size, rigid metal box with high-strength plastic compartments. Convenient, safety snap carrying handle. Actual size illustrations and retail codes of every item shown on grease-resistant lid label. Refills available in standard packages. 020-80 38 H. Paulin & Co., a division of The Hillman Group Canada ULC

PALNUT LOCK NUTS ÉCROUS À BLOCAGE PALNUT 242 Inch 243 Metric Regular Type, Bright Zinc Plated Spring steel, single thread lock nuts. May be used alone or on top of ordinary nuts. Standard Package: 50 Pieces Stock No. Size & Thread Across Flats W Stock No. Size Across Flats W Inch Metric 242-0 5/-24 /2 243-004 M4 9 mm 242-08 3/8-24 9/ 243-005 M5 3 mm 242-020 7/-20 5/8 242-022 /2-20 3/4 Hex Washer Type, Bright Zinc Plated Integral washers on these lock nuts span slots or clearance holes. This spring locking action of the washer provides a secure assembly. Standard Package: 50 Pieces Stock No. Size & Thread W x D Stock No. Size W x D Inch Metric 242-08 8-32 /32 x 5/8 243-05 M5 0 mm x 3 mm 242-0 0-24 3/8 x 3/4 243-0 M mm x 8 mm 242-4 /4-20 7/ x / 242-5/-8 /2 x 3/ GARAGE ASSORTMENT No. 020-074 Contains 00 pieces of all Inch sizes of Palnut Lock Nuts in both regular and washer types. Packed in a clear, plastic box. No. 020-075 Contains 00 pieces of all Metric size Palnut Lock Nuts in both regular and washer types. Packed in a clear, plastic box. SELF-THREADING PALNUTS PALNUTS À FILETAGE COUPANT These washer base, heat treated nuts cut their own threads on plain studs, nameplates, ornaments and mouldings. Stock No. Stud Size Type W x D Bright Zinc plated 242-20 /8 Regular 5/ x 7/ 242-208 5/32 Regular /32 x 9/ 242-20 3/ Regular 3/8 x /2 020-075 Standard Package: 50 Pieces Stock No. Stud Size Type W x D Bright Zinc plated 242-24 /4 Regular 7/ x / 242-2 5/ Regular /2 x 7/8 METRIC SELF-THREADING PALNUTS PALNUTS À FILETAGE COUPANT MÉTRIQUE Standard Package: 50 Pieces Stock No. Stud Size Type W x D Stock No. Stud Size Type W x D Bright Zinc plated 243-204 4 mm Regular 9 mm x 5 mm 243-205 5 mm Regular 0 mm x 5 mm GARAGE ASSORTMENT No. 020-052 Contains 00 nuts of /8, 5/32, 3/, /4 and 5/ Self-Threading Palnuts. Packed in a clear, plastic box. 020-052.800.28.4000 www.hpaulin.com 39

BOLT RETAINERS RETENUES DE BOULON 242 Inch 243 Metric GARAGE ASSORTMENT Bright Zinc Plated These flat, round type, spring steel fasteners are pushed on unthreaded rods, studs, etc. Used on nameplates, moulding studs and shafts. Standard Package: 00 Pieces Stock No. Stud Size Outside Diameter Stock No. Stud Size Outside Diameter 242-40 /.95 242-43.240 7/32 242-403 3/32.95 242-44 /4 7/32 242-40 /8 3/8 242-4 5/ 5/8 242-408 5/32 7/ 242-48 3/8 3/4 242-40 3/ 7/ 242-422 /2 Standard Package: 00 Pieces Stock No. Stud Size Outside Diameter Stock No. Stud Size Outside Diameter 243-403 3.2 mm 9.5 mm 243-405 5.0 mm.0 mm 243-404 4.0 mm.0 mm GARAGE ASSORTMENT No. 020-084 Contains 00 Pushnut Fasteners in both inch and metric - 0 sizes in all. Packed in a transparent plastic box with hinged lid. MASTER ASSORTMENT Black Phosphate Finish These fasteners are pushed onto a screw or bolt of either coarse or fine thread to hold it in place during assembly. When the regular nut is tightened the retainer is left in place. Stock No. Screw or Bolt Dia. Outside Diameter Inch 242-308 5/32 3/8 242-30 3/ 7/ 242-34 /4 /2 242-3 5/ 5/8 242-38 3/8 25/32 242-320 7/ 27/32 242-322 /2 5/ No. 020-07 Contains 00 inch retainers in /4, 5/, 3/8, 7/ and /2. Packed in a sturdy, transparent plastic box. No. 020-077 Contains 00 metric retainers in M, M8, M0 and M2. Packed in a clear, plastic, compartmentalized box. PUSHNUT FASTENERS ATTACHES PUSHNUT METRIC PUSHNUT FASTENERS ATTACHES PUSHNUT MÉTRIQUE No. 020-74 Contains 325 pieces - 20 popular sizes of Regular and Self-Threading Palnuts plus Bolt Retainers and Pushnuts. Packed in a Metal box with moulded plastic compartments. SUPER-SERVICE ASSORTMENT Standard Package: 00 Pieces Stock No. Screw or Bolt Dia. Outside Diameter Metric 243-305 M5.0 mm 243-30 M 7.0 mm 243-307 M.3 4.3 mm 243-308 M8 25.0 mm 243-30 M0 24.0 mm 243-32 M2 2.4 mm 020-077 020-084 020-74 No. 020-8 Contains 500 Regular and Self Threading Palnuts plus Bolt Retainers and Pushnuts - 32 items. Large size, rigid metal box with high-strength plastic compartments. 020-8 For more details see page 0. 8 L x D. 9-3/4 W x 3-3/4 L x 2 D. 40 H. Paulin & Co., a division of The Hillman Group Canada ULC

MULTI-THREAD U NUTS ÉCROUS U FILET MULTIPLE 240 Inch 24 Metric Stock Bolt or No. Screw Length Throat Size A Depth B Width C Inch GARAGE ASSORTMENT Panel Thickness OEM No. Stock No. No. 020-078 Contains 5 Inch Multi-Thread U Nuts. 4 sizes each in its own compartment. Packed in a sturdy, transparent plastic box with hinged lid. No. 020-079 Contains 50 Metric Multi-Thread U Nuts. 7 sizes packed in a clear plastic box with hinged lid. Bolt or Screw Size Length A Standard Package: 25 Pieces (*0 Pieces) Width Panel C Thickness OEM No. Throat Depth B Metric 240-5 /4-20.250 0.825 0.520 0.50 4527, 494257 24-05 M4 x.7 22.0 4.5 0.0 3.8 50055 240-5/-8 0.980 0.580 0.580 0.50 0237-4524 24-0 M x.0 24.0 3.7 3.0 4.0 503957, 0937, N23332-S2, N23332- S53, N23332-S00 240-7 5/-8.250 0.875 0.580 0.50 37983-S, 494258 24-07 M x.0 30.0 20.0 3.0 4.0 50375, 50824, 09385 500, 50337, 240-8 3/8-.70.00 0.720 0.200 4529 24-08 M8 x.25 32.0 2.5 4.7 4.0 550,N23343-S2, N23343-S00 240-9 3/8-.325 0.750 0.9375 0.200 494254, 4525-S2, 5000, 5027, 24-09 M8 x.25 25.5 5.0 4.7 4.0 2337873 N23333-S2, 0283 240-4 /4-20 0.920 0.540 0.520 0.50 48027, 494252 24-0* M0 x.5 33.0 9.0 8.0.0 5002, 2253 24-04 M4 x.7 2.5 0.5.0 3.8 N23330-S2, 50054 24-2 M.3 x.0 24.0 20.0 3.5 4.0 50058, 9433043 For Body Bolts see page 42. SINGLE THREAD U NUTS ÉCROUS U FILET-UNE 240 Inch Phosphate Coated Stock Screw Length Throat No. Size A Depth B Phosphate Coated Spring Steel nut fastens two panels, is retained in one panel. Used for sheet metal and front end assembly on GM, Ford or Chrysler fenders, shrouds and radiators, etc. Width C Panel Thickness OEM No. Stock No. Screw Size 020-079 Length A Throat Depth B Width C Standard Package: 25 Pieces Panel Thickness OEM No. 240-70 No. 0.890 0.375 0.575 0.25 240-74 No. 4 0.785 0.344 0.50 0.5 45258 240-708 No. 8 0.785 0.375 0.550 0.25 9424837, 943530; 3888-S2 240-75 No. 4.000 0.53 0.50 0.5 452 240-709 No. 8.000 0.25 0.550 0.25 944078, 50453, 3883-S2 240-77 No. 8 0.430 0.29 0.325 0.09 25527289 240-70 No. 0 0.785 0.344 0.50 0.25 52492 240-72 M.3 0.988 0.845 0.40 0.340 GARAGE ASSORTMENT No. 020-080 Contains 5 Single Thread U Nuts. 5 sizes packed in a transparent plastic box with hinged lid. 020-080 MASTER ASSORTMENT No. 020-92 Contains 00 U Nuts in both Multi-Thread and Single Thread types. Packed in a metal box with high-strength plastic compartments. Total of 20 sizes inch, metric for complete coverage. 020-92.800.28.4000 www.hpaulin.com 4

BODY BOLTS BOULONS DE CARROSSERIE 245 Special Indented Hexagon Head Bolts with aligning points for pre-drilled panels. Phosphate finish. TYPE Conical Washer Head Dog-Point TYPE 2 Conical Washer Head TYPE 3 Hex Washer Head TYPE 4 Hex Head Sems Stock No. Size Type Washer O.D. OEM No. 245-30 M4.2.4 x 20mm 4 2mm 50405, 5380 245-35 M.0 x 28mm 8mm N077-S43B 245-322 M.0 x 22mm 9mm N07-S2, N07-S00 245-323 M.0 x 28mm 9mm N077-S3 245-324 M.0 x 30mm 2 24mm 503825 245-325 M.0 x 30mm 9mm 0058 245-32 M5 0.8 x 20mm 2mm 00539 245-400 M4.2.4 x 20mm 2 mm 500434, 503892, 4080 245-405 M.0 x 20mm 2 7mm 50294, 5074 245-407 M.0 x 25mm 2 7mm 503834, 2035035 245-408 M.0 x 25mm 2 24mm 503982 245-420 M.3.0 x 20mm 2 7mm 5005 245-42 M.3.8 x 20mm 4 8mm 245-424 M.3.0 x 25mm 2 8mm 500754 245-425 M.3.0 x 25mm 2 24mm 3578 245-439 M8.25 x 25mm 2 24mm 5039 245-440 M8.25 x 30mm 2 24mm 5088 For Body Bolt U Nuts see page 4. Stock No. Size Standard Package: 25 Pieces (*5 Pieces) Type Washer O.D. 245-44 M8.25 x 30mm 3 7mm 50097 245-450* M0.5 x 40mm 2 29mm 5093 245-505 M.0 x 20mm 3 3mm 503800 245-507 M.0 x 25mm 3 3mm 503958 245-50 M.0 x 35mm 3 7mm 505044 245-525 M8.25 x 25mm 3 7mm 50332 245-52 M8.25 x 25mm 2 24mm 5039 245-527 M8.25 x 30mm 3 7mm 50097 245-32 /4 20 x 7/8 3/4 57030-S2 OEM No. 245-0 /4 20 x /4 S/S 3 5/8 40075, 3729, 47482 245-4 5/ 8x3/ 4/4 39034 245-5 5/ 8 x 7/8 2 3/4 384202 245-5/ 8 x 2 7/8 39852 245-7 5/ 8 x 3/ 245-20 3/8 x 2 398997, 40722 245-2 /4 20 x 5/8 025329 245-30 3/8 x /2 2 -/8 40727, 5480 MASTER ASSORTMENT No. 020-9 Contains 50 Body Bolts - 20 sizes. Packed in a metal box with high-strength plastic compartments. Every item is fully illustrated on a grease resistant lid label. For Body Bolt & Nuts Super-Service Assortment No. 020-834 see page. 020-9 9-3/4 W x 3-3/4 L x 2 D. 42 H. Paulin & Co., a division of The Hillman Group Canada ULC

BUMPER BAR BOLTS BOULONS DE PARE-CHOC 245 Stainless Steel Capped Papco Bumper Bar Bolts are capped with 8.8 Stainless Steel, carefully polished and buffed to a high lustre. All bolts are bright plated to resist rust. Type Semi-Round Head Type 2 Round Head Standard Package: contains 2 Bumper Bar Bolts and 2 Self-Locking Nuts * Bumper Bar Bolts and Self-Locking Nuts Stock No. Bolt Size Type Stock No. Bolt Size Type 245-4 /4-20 x 3/4 245-72 7/-4 x -/4 245-50 5/-8 x 7/8 245-73 7/-4 x -/2 245-53 5/-8 x 245-75 7/-4 x 2 245-0 3/8- x 3/4 245-77 7/-4 x 2-/2 245-3/8- x 3/4 2 245-79 7/-4 x 3-/2 245-4 3/8- x 245-82 /2-3 x -/4 245-5 3/8- x 2 245-83* /2-3 x -/2 245-7 3/8- x -/4 245-84 /2-3 x -3/4 245-70 7/-4 x 7/8 245-85 /2-3 x 2 245-7 7/-4 x 245-90 9/-2 x -/2 GRADE B CONELOK LOCKNUTS ÉCROUS À BLOCAGE CONELOK 0 Cadmium plated and waxed These nuts lock in position when tightened with a wrench. Stock No. Bolt Size Standard Package Stock No. Bolt Size Standard Package 0-5 5/-8 00 0-520 7/-4 50 0-58 3/8-00 0-522 /2-3 50 METRIC BUMPER BAR BOLTS BOULONS DE PARE-CHOC MÉTRIQUE 245 Button Head Blue Zinc Plated Type Capped Type 2 Uncapped Standard Package: 0 Bolts and 0 Metric Pozi-Lok Nuts. Stock No. Bolt Size Description Type Stock No. Bolt Size Description Type 245-220 M8 x.25 x 25 mm Chrome plated Cap 245-223 M8 x.25 x 27 mm Uncapped 2 245-22 M8 x.25 x 20 mm Uncapped 245-233 M0 x.5 x 33 mm Stainless Steel Cap 2 245-222 M8 x.25 x 27 mm Stainless Steel Cap 2 245-238 M2 x.75 x 40 mm Stainless Steel Cap 2 MASTER ASSORTMENT No. 020- This assortment contains 8 Bumper Bar Bolts and 8 Self-Locking Nuts in 5 sizes selected according to popularity. Packed in a metal box with moulded plastic compartments. Descriptive lid label shows retail price codes. Will service all popular replacement needs including Metric. For Metric Pozi-Lok Nuts see page 3. 020- Size: 9-3/4 W x 3-3/4 L x 2 D..800.28.4000 www.hpaulin.com 43

LICENCE PLATE BOLTS BOULONS DE PLAQUE 23 230 245 247 NOW - Service Stations, Garages, Dealers can turn licence plate installations into a profitable sale. Papco Licence Plate Bolts are made of either heavily Electroplated Steel or UV Stabilized Nylon. Stock No. 23-278 Description No. 4 x 3/4 Indented Slotted Hex Washer Head Screw. Electro-plated to resist rust. Can be used with 247-840 Nylon Nuts. Standard package contains 00 screws. Standard Package: as indicated 230-245-900 245-903 M.0x20mm Slotted Hex Washer Head Licence Plate Screw 3mm Washer O.D., Hex Size: 0mm, Zinc. Standard package 50 screws. No. 4 x 3/4 Slotted Hex Washer Head Licence Plate Screw. /2 Washer O.D., Hex Size: 3/8. Standard package contains 25 screws. For most compact Fords. No. 4 x 5/8 Indented Hex Slotted Oversize Washer Head Screws. Black Zinc to resist rust. Standard package 00 screws. Can be used with 247-840 Nylon Nut. 245-90 245-90 Universal Nylon Licence Plate nut with screws Fits all Ford, G.M. and Chrysler products having a 3/8 Square Hole. Assembly consists of a 4 x 5/8 Screw and No. 4 Square Nylon Nut. Standard package contains 50 assemblies. No. 4 x 5/8 Special Truss Slot Head, Type B Licence Plate Screw. Electroplated to resist rust. Standard package contains 00 screws. 245-9 245-92 245-94 245-95 247-840 M.8x20mm Phillips Hex Washer Head Licence Plate Screw. Standard package contains 25 screws. M.0xmm Slotted Round Washer Head Licence Plate Screw. Standard package contains 25 screws. No. 4 x 3/4 Slotted Truss Head Licence Plate Screw. 9/ Head Dia. Standard package contains 00 screws. No. 4 x 3/4 Slotted Hex Washer Head Licence Plate Screws. Standard package 50 Screws. No. 4 Licence Plate Nut. Standard package contains 25 pieces. NYLON LICENCE PLATE BOLTS BOULONS DE PLAQUE NYLON 245 Papco Nylon Licence Plate Bolts are made of stabilized Nylon. Self-locking - Can t rust - Long Lasting. No. 245-909 Assembly consists of /4-20 x /2 Nylon Bolt and a /4-20 Self Locking rectangular Nut. Standard package contains 00 assemblies. /4-20 x /2 No. 245-908 Assembly consists of M x 20 Nylon Bolt and an M Nylon Hex Nut. Standard package contains 00 assemblies. M x 20 mm For SUPER-SERVICE ASSORTMENT No. 020-85 of Licence Plate Bolts please refer to page. For SUPER-SERVICE ASSORTMENT No. 020-87 of Nylon Licence Plate Bolts please refer to page. 44 H. Paulin & Co., a division of The Hillman Group Canada ULC

MOULDING BOLTS BOULONS DE MOULURE 24 24-2 24-24-22 24-24 24-20 24-20 24-22 24-228 24-22 24-28 24-222 24-24 24-2 ILLUSTRATIONS ARE APPROXIMATE Standard Package: 25 Pieces, * 50 Pieces Stock No. OEM No. Application 24-2* 00093, 24705 Universal T Bolt Clip 0-24 x 3/4 24-* 379205 Chevrolet Front Fender 0-24 x 5/8 24-20* 0-24 x /2 Universal Universal T Bolt Clip 24-22* 758099, 000720, 0004, 3744999 Universal T Bolt Clip 0-24 x /2 24-24* 372235, 03029, 000705 Universal T Bolt Clip 0-24 x 3/4 24-20 475945, 47842, 4779348 GM Front and Rear Fender and Door Peak - All 24-22 39448 GM General Purpose 24-24 945350 GM Door and Door Belt 24-2 484570 GM General Purpose 24-28 48459, 00235 General Purpose Belt Moulding 24-222 D5AB-0423B0-AA, D5DB-423B0-CA Ford Moulding 24-22 D5DB-423-B0 Ford Belt Moulding 24-228 D8KB-5420908AA, 400395 Ford Moulding SUPER-SERVICE ASSORTMENT No. 020-822 Contains 95 Moulding Bolts. Complete coverage. For more detail, see page 0..800.28.4000 www.hpaulin.com 45

MOULDING CLIPS PINCES DE MOULURE 24 24-35 24-352 24-353 24-354 24-357 24-358 24-395 24-39 24-397 24-398 24-399 24-400 24-40 24-402 24-403 24-404* 24-405 ILLUSTRATIONS ARE APPROXIMATE Standard Package: 25 Pieces, * 00 Pieces Stock No. OEM No. Application 24-35 803-853-39C VW Moulding Clip Red 24-352 825-853-39 Audi Moulding Clip 24-353 53--804-205 BMW Moulding Clip With Sealer 24-354 202-997 Volvo Moulding Clip Green 24-357 -247-708 Volvo Side Moulding 24-358 9083-0300 Toyota Front Bumper, Cushion Clip 24-395 8799350 GM Rear End and Quarter Panel Moulding 24-39 207505 GM Quarter Belt Reveal Moulding 24-397 209975 GM Quarter Belt Reveal Moulding 24-398 88094 GM Vinyl Top Moulding 24-399 39897 GM Rocker Panel Moulding - Metal 24-400 0-24 x 3/4 Universal Scored Type Moulding Bolt fits up to 2-/2 wide 24-40 983809 GM Body Side Moulding 24-402 449292 GM Body Side and Wheel Opening Moulding 24-403 DMY 5402488 Ford Roof Cover and Body Side Mouldings 24-404* 4-24 x 3/8 Special Phillips Flat Head Screw (replaces Welded Studs) 24-405 00333 Chrysler Door and Fender WINDOW REGULATOR RIVETS RIVET RÉGULATEUR DE FENÊTRE Aluminum Body/Steel Mandrel Standard Package: 25 Pieces Stock No. OEM No. Dia. Flange Grip Range Application 24-00 94375, 38589-S00, 035 /4 /2 /32-9/4 GM, Ford, Chry, Window Regulator 24-05 2084399, 38928-S00 /4 /2 /-3/4 GM, Ford, Window Regulator 24-0 385323-S00, 0309 /4 /2 33/4-9/32 Ford, Chrysler, GM Window Regulator 24-2 388047-S00 /4 /2 5/4-7/4 Ford Door Handle Assembly, GM Heat Shield Attach 24-4 388442-S00 /4 3/4 /8 -/4 Steel Mandrel Bumper Assembly 24-388047-S00 /4 /2 3/32 -/8 Steel Mandrel Bumper Assembly 4 H. Paulin & Co., a division of The Hillman Group Canada ULC

GLASS SHOP FASTENERS ATTACHES A PARE-BRISE 24 Standard Package: 25 Pieces, *0 Pieces 24-35 24-359 24-30* 24-409 24-40 24-4 24-42 24-43 24-45 24-4 24-47 24-48 24-49 24-420 24-425 24-43 ILLUSTRATIONS ARE APPROXIMATE Stock No. OEM No. Application 24-35 -255-553 Volvo Windshield Moulding White 24-359 7554-3200, 75548-3200 Toyota Windshield Moulding with Adhesive Pad 24-30* 9074-92-0030 Honda Windshield Moulding with Adhesive Pad 24-409 9895598 GM Windshield Reveal Moulding 24-40 54047 (Nylon) GM Windshield and Rear Window Reveal Moulding 24-4 877859, 985477 GM Rear Window Reveal Moulding 24-42 C8AZ-34243-A, DAZ-54243-B Ford Rear Window and Windshield Moulding 24-43 003049, 003752 Chrysler Windshield and Rear Window Reveal Moulding 24-45 E3SB-34243-AB Ford Windshield and Backlight Moulding 24-4 003878 (Nylon/Metal) Chrysler Windshield Backlight Moulding 24-47 92950, 90232, 2003072 GM Windshield and Rear Window Reveal Moulding 24-48 97330 (Nylon), AMC #4005540 GM Windshield to Panel Lower Side 24-49 209887 (Nylon) GM Windshield Reveal Moulding 24-420 980824 GM Windshield and Rear Window Reveal Moulding 24-425 4234830, 233788 GM Door Lock Rod Clip 24-43 003752 Chrysler Windshield and Backlight Reveal Moulding.800.28.4000 www.hpaulin.com 47

TRIM FASTENERS ATTACHES FINITION 247 Christmas Tree Clips The flexible ribs of these nylon fasteners deflect as the clip is pushed into a panel hole and hold securely anywhere along their ribbed shank. The Cut-Out-Type can be twisted into a small panel hole for retention. Used on inner door panels to hold covering or trim. 247-00 247-020 247-024 247-025 247-02 247-035 247-038 247-050 247-055 247-05 247-08 247-09 247-073 247-074 247-075 ILLUSTRATIONS ARE APPROXIMATE Standard Package: 25 Pieces Stock No. OEM No. Application Stock No. OEM No. Application 247-00 4700 GM - Trim Panel Retainer 247-055 387477-S Ford - Interior Trim Panel 247-020 003587, 255422 GM, Chrysler - Roof Headliner 247-05 225227 GM - Panel Retainer 247-024 389443-S Ford - Fascia To Bumper 247-08 9500504, 777-000 GM, Toyota - Door Trim Panel 247-025 003349, 03233, 385-S, N989022 Ford, Chrysler - Trim Panel 247-09 9047-09008 Toyota - Retaining Clip 247-02 003423, 2048248 GM, Chrysler - Interior Trim Panel 247-073 38529-89A-300 Honda - Retaining Clip 247-035 N-800387-S Ford - Dashboard 247-074 9047-0-0 Toyota - Retaining Clip 247-038 388930-S Ford - Trim Panel Retainer 247-075 790-T3000 Nissan - Retaining Clip 247-050 0322, 2029835 GM, Chrysler - Trim Panel Ret. 247-02 247-3 247-0 247-05 247-082 247-053 247-02 247-080 CUT-OUT TYPE 247-052 247-085 247-095 247-00 247-0 247-49 ILLUSTRATIONS ARE APPROXIMATE Standard Package: 25 Pieces Stock No. OEM No. Application Stock No. OEM No. Application 247-02 5545202, 52948, 5075, 5953247 GM - Door Trim Panel 247-082 0290 GM - Trim Panel 247-052 8934-202-599, 043422, Ford, GM, Jeep Eagle Door N8052-S00 Trim Panel 247-085 305575 GM - Door Trim Panel 247-053 N80555-S Ford - Door Trim Panel 247-095 3337 Chev. Truck, GMC - Trim Panel 247-0 0073833, 500382, 2042800 GM - Door Trim Panel 247-00 985057, N989050, 4005470, 003349 GM, Chrysler, VW-Door Trim Panel 247-02 N80925-S Ford - Door Trim Panel 247-0 38749-S Ford - Trim Panel Retainer 247-05 38782-S Ford - Seat Back 247-3 44785 Chrysler - Trim Panel 247-080 20489, 98848, 9883583 GM - Door Trim Panel & Headliner 247-49 383033-S0, 358470, 90054 Ford - Door Trim Panel 48 H. Paulin & Co., a division of The Hillman Group Canada ULC

PLASTIC SHIELD RETAINERS RETENUES DE PROTÉGER PLASTIQUE 247 247-20 247-2 247-22 247-25 247-2 247-222 247-230 247-23 247-232 247-235 247-23 247-237 247-238 247-248 247-245 247-240 247-252 247-250 247-253 247-249* ILLUSTRATIONS ARE APPROXIMATE Standard Package: 25 Pieces Stock No. OEM No. Application Stock No. OEM No. Application 247-20 250383 GM Dash Panel 247-23 2998430 Chrysler, Radiator Grille 247-2 03044, 388577S, 59584, 0539, 705589-S300 GM, Ford, Chrysler, Radiator 247-237 5007 Chrysler Fascia 247-22 205482 GM Screen Shroud 247-238 43400 Chrysler Hood Insulated 400459, 39590, 0332, 247-25 389358, 33234, 40933, GM, Ford, Chrysler Fender 247-240 N-800505-S Ford Radiator Attaching 20732399 247-2 932 GM Radiator Apron 247-245 00335, 385330-S, D30Z-77-A Ford Grille, Chrysler Hood 247-222 N804379S, 354 GM, Ford Bumper 247-248 2004875 GM Hood Insulation 247-230 38405-S, 480534 GM, Ford, Cowl Insulation 247-249 3977775, 30785 GM Hood Insulation 247-23 385595-S, 38553-S Ford Hood Insulation 247-250 389809 GM Hood Insulation 247-232 N80370-S Ford Fascia 247-252 38553-S Ford Hood Insulation 247-235 387258-S, 20032850, 38577 GM, Ford, Chrysler Mud Shield 247-253 388908-S Ford Hood Insulation TRIM PAD RELEASE TOOL No. 247-299 Made of heat-treated, high carbon steel with bevelled front edges for easy insertion - plus a machined gripping slot for positive contact. Designed to remove plastic trim pad fasteners without damaging the fastener or backboard. Works well on metal trim pad fasteners. Individually carded. 247-299.800.28.4000 www.hpaulin.com 49

WEATHERSTRIP FASTENERS ATTACHES POUR BANDE MÉTÉOROLOGIQUE 247 Standard Package: 25 Pieces 247-077 247-50 247-55 247-0 247-5 ILLUSTRATIONS ARE APPROXIMATE Stock No. OEM No. Application Stock No. OEM No. Application 247-077 904-7-0030 Honda Weatherstrip Fits 5 mm Hole 247-0 294547 Chrysler Weatherstrip 247-50 873909 GM Door Weatherstrip 247-5 C5AB-22058-A Ford Door Weatherstrip 247-55 487498 GM Door and Body Weatherstrip ANCHOR NUTS AND CLIPS ÉCROUS ET PINCES D ANCRAGE 247 Standard Package: 25 Pieces *50 Pieces **0 Pieces 247-57 247-725 247-730 247-80 247-8 247-82 247-85 247-8 247-89 247-82 247-825 247-82 247-830 247-840 247-850 247-85 247-852 247-853 247-854 247-855 247-85 247-857 247-858* 247-859 240-3 247-80** Stock No. OEM No. Application Stock No. OEM No. Application 240-3 53879-2200 Toyota U Nut No. 4 Screw 247-85 90-SC7-0030 Honda No. 8 Screw Grommet 247-57 - Plymouth Laser Grille Clip H00-50-84 Mazda No. 8 Screw Grommet - Ford Escort Grille Clip MS-48002 Mitsubishi No. 8 Screw Grommet - Honda Grille Clip 05-0048, 74798-S9000 Nissan No. 8 Screw Grommet 894280270 Isuzu Grille Clip 247-852 MB-09845 Mitsubishi No. 0 Screw Grommet - Mitsubishi & Plymouth Laser Grille Clip 028-00023 Nissan No. 0 Screw Grommet 247-725 03234 Chrysler Radiator Grille Nut No. 8 Screw 9089-000 Toyota No. 0 Screw Grommet 247-730 N800503-S Ford Grille Attachment Nut No. Screw 247-853 9089-040 Toyota No. Screw Grommet 247-80 379830-S Ford Headlight Door No.8 or 0 Screw 902-93-0030 Honda No. Screw Grommet 247-8 25485 GM General Purpose No. Screw 247-854 9055-SA0-0030 Honda No. Screw Grommet 247-82 9948 GM Side Marker No. 8 Screw 247-855 9089-0503 Toyota No. 0 Screw Grommet 247-85 3893980 (Black) GM Grille to Front End No. 8 Screw MS-480002 Mitsubishi No. 0 Screw Grommet 247-8 399773 GM Headlamp Bezel No. 8 Screw 247-85 902-7-0030 Honda No. 0 Screw Grommet 247-89 40324 GM No. 8 Screw 999-00-503 Mazda No. 0 Screw Natural Nylon 247-82 8934-20-23 Chrysler Radiator Grille No. 8 Screw 8425-H5000, Nissan No. 0 Screw Grommet 247-825 2524525 Chrysler No. 8 or 0 Screw 298-V7000 247-82 355003 GM Headlight Door No. or 8 Screw 247-857 908-88-0030 Honda No. Screw Grommet w/sealer 247-830 380382 GM Headlight Bezel No. or 8 Screw 247-858* 000-988-5-8 Mercedes Benz Moulding Insert Red 247-840 3907444, 4755299 Licence Plate Nut No. 4 Screw 247-859 433-5-480-20 BMW Plastic Nut 4mm Thread 247-850 9072-7-80M Honda No. Screw Grommet 247-80** 948422 GM U Nut No. 0 Screw 9089-0403 Toyota No. Screw Grommet 53879-4020, Toyota U Nut No. 0 Screw 53879-22030 53879-400-A 50 H. Paulin & Co., a division of The Hillman Group Canada ULC

ANCHOR NUTS UTILITY ASSORTMENT No. 020-358 Contains 50 Nuts of 247-80, to 247-840. Complete coverage. 020-358 SPECIALTY RETAINERS ASSORTMENT No. 020-450 Contains 90 pieces of the 20 most popular SKUs in specialty retainers, constructed from high-quality materials. Push-in and Screw-in types. Various diameters and lengths to fit various applications. Matching visual reference guide on the inside cover to identity parts. All items available for reorder. 020-450 ANCHOR GROMMETS AND NUTS MASTER ASSORTMENT No. 020-78 Contains 295 Anchor Grommets and Nuts. Packed in a metal container with high-strength plastic compartments. 020-78 TRIM FASTENERS MASTER ASSORTMENT No. 020-79 Contains 50 Fasteners General Motors. For more details, see page 8. 020-79 TRIM FASTENERS MASTER ASSORTMENT No. 020-80 Contains 50 Fasteners Chrysler and Ford. For more details, see page 8. 020-80 TRIM FASTENERS SUPER-SERVICE ASSORTMENT No. 020-83 Contains 300 Trim and Weather-strip Fasteners, plus shield retainers. For more details, see page 0. ANCHOR GROMMETS AND NUTS SUPER-SERVICE ASSORTMENT No. 020-84 Contains 45 Anchor Grommets and Nuts - 32 items. Large size, rigid metal box with high-strength plastic compartments. Size: 2 W x 8 L x D. For more details see page 0. 020-84.800.28.4000 www.hpaulin.com 5

SCREW-IN RETAINERS ATTACHE DE SOUTIEN AVEC VIS 247 247-39 247-40 247-44 247-397 247-429 247-48 247-490 247-49 247-492 247-493 247-494 ILLUSTRATIONS ARE APPROXIMATE Standard Package: 25 pieces Stock No. OEM No. Application Stock No. OEM No. Application 247-39 N80394-S Ford Push-Type Exterior Retainer 247-48 N803494-S Ford Aerostar Fascia, Trim and Grille 50287 Chrysler 57909 GM Blazer and Jimmy Door handle Bezel 247-397 572330 GM Push-Type Exterior Retainer 247-490 9075-SB3-003 Honda Screw Retainer 595470 GM FB0-5-94 Mazda 247-40 N804570-S Ford Trim Retainer 387-9559 Nissan 204092 GM Exterior Body 247-49 9084-SA5-0030 Honda Screw Retainer 247-429 N804837-S Ford Push-Type Exterior Retainer 0998-30880 Nissan 247-44 N80847-S Ford Push-Type Exterior Retainer 247-492 908-SB0-0030 Honda Screw Retainer 039822 GM 247-493 9047-007-20 Toyota Screw Retainer 2580782 GM 247-494 3844-0A00 Nissan Screw Retainer PLASTIC-RIVETS 247-40 247-402 247-403 247-405 247-404 247-407 247-4 247-44 247-408 247-428 247-450 247-455 247-458 247-40 247-42 247-4 247-47 247-470 247-45 247-480 247-475 ILLUSTRATIONS ARE APPROXIMATE Standard Package: 25 pieces, *5 pieces Stock No. OEM No. Application Stock No. OEM No. Application 247-40* 5973400 GM Fascia 247-40 387944-S Ford Grille to Metal Stamping 247-402 5973823 GM Fascia (Blue) 247-42 N80278-S Ford Splash Shield and Fascia 247-403 597399 GM Fascia (Brown) 4093088 GM 247-404 20590899 GM Exterior Body 247-44 N80523-S Ford Grille Opening Reinforcement 247-405 4045480 GM Fascia 247-45 387843-S Ford Fender Shield 247-407 40920 GM Fender Line 247-4 N80332-S Ford Body 247-408 4032200 GM Grille Attachment 2050029 GM 247-4 40922 GM Rad Overflow and 247-47 50590 Chrysler Splash Shield and Fascia 407289 Windshield washer Reservoir N80342-S Ford 247-428 2054785 GM Exterior Body Retainer 247-470 38342-S Ford Grille to Headlamp Bracket 247-450 4005089 GM A/C Vents General Purpose 247-475 03383 Chrysler Grille 247-455 0079 GM Front Bumper Grille bar 247-480 03390 Chrysler Plastic Inner Fender 247-458 W725-S300 Ford Exterior Body Retainer 589295 GM 52 H. Paulin & Co., a division of The Hillman Group Canada ULC

UTILITY SCISSORS CISEAUX FONCTIONNELS 249 No. 249-20 Professional quality features stainless steel blades with long-lasting ground edges and high-impact, man-size A.B.S. plastic handles. Individually packaged on try-me blister card. 249-20 UTILITY SHEARS CISAILLES FONCTIONNELS No. 249-30 Professional quality, stainless steel blades with long-lasting edges. High-impact handles with safety lock. For wire, thin sheet metal, shim stock, vinyl, fibreglass and more. Individually carded. UTILITY SCRAPERS GRATTOIRS FONCTIONNELS Papco Utility Scrapers are ideal for trimming, cutting, splicing, scraping paint or stickers. Choose from the retractable, pocket size or standard, angled head for hard-to-reach places - both use either steel or plastic razor blades. No. 249-24 Angled Head for hard-to-reach places No. 249-25 Retractable, pocket size REPLACEMENT BLADES LAMES DE RECHANGE Steel Razor Blades No. 249-2 Single edge, industrial duty steel replacement blades for No. 249-24 and 249-25 utility scrapers. Skin packed card contains 0 blades in a recloseable box. Plastic Razor Blades No. 249-27 For cleaning sun film or laminated glass without cutting or nicking. Fits both Papco Utility Scrapers. Skin packed card contains 00 blades in a recloseable box. TOOLS OUTILS 24 Windshield Moulding Release Tool No. 24-500 Windshield Moulding Release Tool for removing all windshield mouldings. Features angled shaft and bevelled front edges for easy entry. 249-30 249-24 249-25 249-2 249-27 24-500 Window Handle Removing Tool No. 24-895 Window Handle Removing Tool for removing inside door and window handles. 24-895.800.28.4000 www.hpaulin.com 53

PLUG BUTTONS BOUCHONS 34 Black Vinyl or Metal Papco Plug Buttons are used for plugging unsightly body holes after removing accessories, rust-proofing or body repair. Stock No. Description Black Vinyl Standard Package: 00 Pieces 34-34 3/8 Diameter, Flush Sheet Metal Plug Head Dia. 3/4 34-3 /2 Diameter, Flush Sheet Metal Plug Head Dia. 7/8 Black Vinyl 34-322 /2 Diameter, Plastic Plug Button Head Dia. 7/8 34-32 3/4 Diameter, Plastic Plug Button Head Dia. -5/32 34-328 7/8 Diameter, Plastic Plug Button Head Dia. -7/32 34-330 Diameter, Plastic Plug Button Head Dia. -/32 CASTER AND CAMBER SHIMS CALES POUR CHASSE DIRECTION 250 BODY SHIMS CALES DE CARROSSERIE 250 Papco Shims are used to adjust caster on knee-action and ball-joint suspensions. All Papco shims are plated to resist rust and stamped with thickness or degree. -/8 General Motors 97-up Stock No. Thickness Slot 250-082 / /2 250-083 /8 /2-3/ W x -/8 H. Used for alignment of Hoods, Fenders,Cowls and Starter Motors Plated Steel, Standard Package Contains 25 Shims /2-3/ -/4 -/2 -/2 /2-3/4 Body Shim Stock No. Thickness 250-32 / 250-33 /8 3/4 2 Body Shim Stock No. Thickness 250-38 /8 Ford 3/8-5/ Hood Shim Stock No. Thickness 250-37 / 250-372 /8 Chevrolet 54 H. Paulin & Co., a division of The Hillman Group Canada ULC

DOOR HINGE PINS AND BUSHINGS GOUPILLES ET BAGUES DE CHARNIÈRE PORTES Papco Door Hinge Pins and Bushings are replacements for original equipment hardware that has worn, been broken or damaged - causing misalignment, sagging or sticking. ILLUSTRATIONS ARE APPROXIMATE 250-545 Std. Pkg. 25 pcs. O.D. /2, I.D. /32 GM C-K Models 988-on Height: 23/4, Flange O.D. 43/4 Splined O.D. Side Door Upper Hinge Door Hinge Bushing #2338074, 59493, 59497, 3293 CL Part No: 90-5, Pieces: 2 250-54 Std. Pkg. 25 pcs. O.D. 7/32, I.D. 25/4 GM C-K Models 988-on Height: 23/4, Flange O.D. / Splined O.D. Side Door Lower Hinge Door Hinge Bushing #55209, 594972, 3292 CL Part No: 90-, Pieces: 2 250-549 Std. Pkg. 25 pcs. O.D. /2, I.D. /32 Buick 97-on Cadillac 980-on Chevrolet All 97-on, Corvette 982-73 Olds Exc. Starfire: 980-on Pontiac Exc. Astre & Sunbird 980-on Height: 3/8, Flange O.D. 9/32 Door Hinge Bushing #9792, 2034537 CL Part No: 90-00, Pieces: 3 250-550 Std. Pkg. 25 pcs. O.D. 27/4, I.D. /32 Buick (Exc. Skyhawk) 97-on Cadillac 94-on Chevrolet (Exc. Monza & Vega) 92-on, Corvette 95-on GM C&K Truck 993-79 Olds (Exc. Starfire) 949-on Pontiac (Exc. Astre & Sunbird) 932-on Height: 9/4, Flange O.D. 9/32 Door Hinge Bushing GM #97297, FORD #DAZ-52284A CL Part No: 90-0, Pieces: 2 250-55 Std. Pkg. 25 pcs. O.D. 3/4, I.D. /32 Ford 973-on Head Dia. 20mm, Stem Length: 9mm Flange O.D. 9/32 Door Hinge Bushing #D90Z-52284A CL Part No: 90-02, Pieces: 2 250-552 Std. Pkg. 25 pcs. O.D. 5/, I.D. 7/4 Dodge & Chrysler 970-on Length: 23/4, Flange O.D. 33/4 Door Hinge Bushing #40337 CL Part No: 90-03, Pieces: 3 250-553 Std. Pkg. 25 pcs. O.D. 3/4, I.D. /32 250-559 Pin Dia. /32, Length: 4-/ GM (Including Pick-Ups & Vans) 98-on Length: 23/4, Flange O.D. 9/32 Splined O.D. Door Hinge Bushing #20429500 CL Part No: 90-0, Pieces: 2 Buick, Cadillac, Chevrolet, Oldsmobille, Pontiac 992-973 Overall Head Dia. 9/ Door Hinge Pin #27989, 200447 CL Part No: 90-20, Pieces: 250-50 Pin Dia. /32, Length: 4 Buick, Chevrolet, Oldsmobille, Pontiac 995-978 Overall Head Dia. 7/ Door Hinge Pin #2004335 CL Part No: 90-25, Pieces:.800.28.4000 www.hpaulin.com 55

DOOR HINGE PINS AND BUSHINGS GOUPILLES ET BAGUES DE CHARNIÈRE PORTES ILLUSTRATIONS ARE APPROXIMATE 250-5 Dia. /32, Length: 5-/4 GM C & K Trucks 988-2000 Shoulder O.D. 3/8, Head O.D. 9/ Stainless Steel Door Hinge Pin #55980; 59595; 5979; 888973 CL Part No: 90-30, Pieces: 250-52 Pin Dia. 7/4, Length: 2-3/4 Dodge & Plymouth vans, Ramcharger & Trailduster 970-on Head O. D. 9/ Door Hinge Pin Cargo doors, lift gates, rear doors and fold-up rear seat floor hinges #028993, 032975 250-53 Dia. 9/, Length: 5-/2 GM C & K Trucks 988-2000 Knurl Dia. 9/32, Roller Overall Dia. 3/4, Door Roller Pin Assembly Roller Groove Dia. 5/8 Not Available through O.E.M. 250-54 Dia. 25/4, Length: 5-/ GM S & T Trucks 994-on Door Roller Pin Assembly Roller Overall Dia. 3/4, Roller Groove Dia. 5/8 #57283 250-5 Dia. /32, Length: 3-/2 Ranger F50, F250, F350 998-80 Knurl Dia..358, Overall Head Dia. 9/ Door Hinge Pin 250-57 Door Hinge Repair Kit Chevrolet Suburban 500/2500 & Tahoe 200-2000 GMC Yukon 200-200 Cadillac Escalade 200-2000 Chevrolet Silverado & GMC Sierra 500/2500, HD/3500, HD 2007-999 Door Hinge Repair Kit #89025539 5 H. Paulin & Co., a division of The Hillman Group Canada ULC

BLIND RIVETS RIVETS OBTURATEURS 239 Fasten joints without access to reverse side. Insert rivets - the retracting jaws in the setting tool pull the mandrel head into the rivet body on the reverse side until the mandrel breaks. The high clinch action pulls the parts together for a tight, vibration-proof fastening. Standard Package: /8 and 5/32 Dia. 500 rivets; 3/ Dia. 250 rivets; Stainless Steel 00 rivets. Most popular sizes available in 50 Rivets per convenient hang-up boxes. *25 per hang-up box. Rivet Diameter Drill How to measure rivets: Inch Metric Number Size 3/32 2.4 mm No. 4.09 -.00 /8 3.2 mm No. 30.29 -.33 5/32 4.0 mm No. 20.0 -.4 3/ 4.8 mm No..92 -.9 Stock No. Other No. Hang-up Box No. Rivet Dia. Grip Range Head Type Rivet Length Aluminum Rivet - Aluminum Mandrel 239-0 AA42D 239- /8 (.25) / - /8 Domed Head.232 239-04 AA43D 239-4 /8-3/ Domed Head.294 239-07 AA44D 239-7 3/ - /4 Domed Head.357 239-08 AA44LF - 3/ - /4 Large Flange.357 239-023 AA4D - 5/ - 3/8 Domed Head.48 239-02 AA48D - 3/8 - /2 Domed Head.25 239-038 AA5D - 5/32 (.5) /4-3/8 Domed Head.504 239-047 AA2D 239-47* 3/ (.88) / - /8 Domed Head.277 239-053 AA4D 239-53* /8 - /4 Domed Head.402 239-05 AAD - /4-3/8 Domed Head.527 239-057 AALF - /4-3/8 Large Flange.527 239-059 AA8D - 3/8 - /2 Domed Head.52 239-00 AA8LF - 3/8 - /2 Large Flange.52 Aluminum Rivet - Steel Mandrel 239- AS42D 239-7 /8 (.25) / - /8 Domed Head.232 239-4 AS43D 239-74 /8-3/ Domed Head.294 239-7 AS44D 239-77 3/ - /4 Domed Head.357 239-50 AS2D 239-750* 3/ (.88) / - /8 Domed Head.277 239-53 AS4D 239-753* /8 - /4 Domed Head.402 239-5 ASD - /4-3/8 Domed Head.527 239-59 AS8D - 3/8 - /2 Domed Head.52 239-0 AS8LF - 3/8 - /2 Large Flange.52 Steel Rivet - Steel Mandrel 239-20 SS42C 239-80 /8 (.25) / - /8 Countersunk.27 239-2 SS42D 239-8 / - /8 Domed Head.232 239-23 SS43C 239-83 /8-3/ Countersunk.3 239-24 SS43D 239-84 /8-3/ Domed Head.294 239-2 SS44C 239-8 3/ - /4 Countersunk.32 239-27 SS44D 239-87 3/ - /4 Domed Head.357 239-28 SS44LF - 3/ - /4 Large Flange.357 239-223 SS4D - 5/ - 3/8 Domed Head.48 239-22 SS48D - 3/8 - /2 Domed Head.25 239-229 SS52D - 5/32 (.5) / - /8 Domed Head.254 239-235 SS54D - 3/ - /4 Domed Head.397 239-238 SS5D - /4-3/8 Domed Head.504 239-250 SS2D 239-850* 3/ (.88) / - /8 Domed Head.277 239-253 SS4D 239-853* /8 - /4 Domed Head.402 239-25 SSD - /4-3/8 Domed Head.527 239-257 SSLF - /4-3/8 Large Flange.527 239-259 SS8D - 3/8 - /2 Domed Head.52 239-20 SS8LF - 3/8 - /2 Large Flange.52 239-22 SS0D - /2-5/8 Domed Head.777 239-23 SS0LF - /2-5/8 Large Flange.777 239-25 SS2D - 5/8-3/4 Domed Head.902 239-2 SS2LF - 5/8-3/4 Large Flange.902 Stainless Rivet - Steel Mandrel 595- STS42D - /8 (.25) / - /8 Domed Head.232 595-4 STS43D - /8-3/ Domed Head.294 595-7 STS44D - 3/ - /4 Domed Head.357 595-23 STS4D - 5/ - 3/8 Domed Head.48 595-2 STS48D - 3/8 - /2 Domed Head.25 595-50 STS2D - 3/ (.88) / - /8 Domed Head.277 595-53 STS4D - /8 - /4 Domed Head.402 595-5 STSD - /4-3/8 Domed Head.527 595-59 STS8D - 3/8 - /2 Domed Head.52 Stainless Rivet - Stainless Mandrel 595-2 STST42D - /8 (.25) / - /8 Domed Head.232 595-24 STST43D - /8-3/ Domed Head.294 595-27 STST44D - 3/ - /4 Domed Head.357 595-223 STST4D - 5/ - 3/8 Domed Head.48 595-22 STST48D - 3/8 - /2 Domed Head.25 595-250 STST2D - 3/ (.88) / - /8 Domed Head.277 595-253 STST4D - /8 - /4 Domed Head.402 595-25 STSTD - /4-3/8 Domed Head.527 595-259 STST8D - 3/8 - /2 Domed Head.52.800.28.4000 www.hpaulin.com 57

HAND RIVETERS RIVETEUSE MANUELLE 239. Drill a hole of the recommended size in each of the parts to be riveted and select correct nose-piece. 2. Fully open handles. Insert rivet until head touches nose-piece. 3. Insert rivet in the hole. 4. For soft materials 5. Squeeze handles or oversize holes use back-up plates to eliminate rivet pull-through. together. If mandrel does not break, open handles, push rivet head back to nose-piece and repeat until mandrel breaks.. Hold riveter with nose-piece up. Fully open handles and snapped off stem will fall out. MEDIUM DUTY BLIND RIVETER No. 239-500 An economical tool for medium duty. Vinyl grips on stamped long handles for extra leverage with milled steel nose. Sets 3/32, /8, 5/32 and 3/ Dia. aluminum rivets. Individually packaged. 239-500 PROFESSIONAL SERVICE BLIND RIVETER No. 239-50 Sturdy, fast acting tool. Will set 3/32, /8, 5/32 and 3/ Dia. rivets. Capacity 3/ aluminum. Moulded contour hand grips and long forged handles for extra leverage. Complete with four nose-pieces. Heavy Duty Individually packaged. 239-50 BLIND RIVET MASTER ASSORTMENT No. 020-7 Contains 200 pieces - 0 popular sizes of Aluminum and Steel Domed Head Rivets and 3 sizes of Back-up Plates. Packed in a sturdy metal container with handy moulded compartments and an actual size illustrated grease-resistant lid label. Size: 9-3/4 W x 3-3/4 L x 2 D. 020-7 MULTI-GRIP BLIND RIVETS RIVETS OBTURATEURS MULTI-GRIP 239 These blind rivets cover the grip range of three standard rivets. Excellent where a combination of hard and soft materials needs fastening. Compensates for hole size and alignment variations. Aluminum body and steel mandrel. Domed head. Stock No. Other No. Rivet Dia. Grip Range Rivet Length 239-34 AD4-43 /8 (.25).03-.85.35 239-320 AD43-45 /8 (.25).57-.335.480 239-335 AD52-54 5/32 (.5).047-.248.425 239-353 AD2-4 3/ (.87).03-.252.44 Standard Package: 00 Rivets. 58 H. Paulin & Co., a division of The Hillman Group Canada ULC

BACK-UP PLATES PLAQUES DE RENFORT 239 239-493 Back-up plates for /8 Dia. Rivets (9/4 x 3/8 x /32) Plated Steel, 00 per box. 239-494 Back-up plates for 3/ Dia. Rivets (3/4 x /2 x 3/4) Plated Steel, 00 per box. 239-492 Back-up plates for 3/ Dia. Rivets (3/4 x /2 x 3/4) Aluminum, 00 per box. 239-493 PLASTIC RIVETS RIVETS EN PLASTIQUE 247 Papco Plastic Expansion Rivets are used to fasten panels, fascia strips, inner fenders, grilles, shields etc. Moulded of nylon, the three leg design draws panels tightly together as the mandrel breaks off.. 2. Standard Package: 25 Pieces 247-300 247-30 247-302 247-303 247-304 247-305 247-30 247-307 247-308 ILLUSTRATIONS ARE APPROXIMATE Stock No. OEM No. Rivet Dia. Max. Grip Head Flange Dia. Drill Size 247-300 Chrysler: 500899, GM: 20432975 5 mm mm 2 mm 7/32 VW: 75-853-5770C 247-30 Chrysler: 5009.3 0 7 /4 Ford: N803043-S GM: 40398 247-302 GM: 407094 (White).3 7 /4 247-303 Ford: N80382-S.3 0 3 GM: 20452072 247-304 GM: 2043302. 5 7 9/32 VW: 75-853-577A 247-305 GM: 204272. 5 3 9/32 247-30 Ford: N80489S, GM: 204237 5 4.5 2 7/32 247-307 Chrysler: 500898 5 0 2 7/32 247-308 3884-S00 (Black) 3/ /2 9/ Ford Fascia & Bumper (Aluminum) For Papco Plastic Rivets Master Assortment No. 020-93 see page 8. PLASTIC RIVET SETTING TOOL No. 247-330 This sturdy steel tool sets all sizes of plastic rivets. The long reach gets into tight areas and the extra leverage allows fast, one-stroke setting. Used with Plastic Rivets above. Order by stock number. Individually packaged. 247-330.800.28.4000 www.hpaulin.com 59

BLIND WELL NUTS ÉCROUS PUITS OBTURATEURS 239 Consists of a flanged neoprene bushing with a captive brass insert nut. As the screw is tightened the bushing expands making a secure fastening in thin sheet metal or blind holes. Use to mount accessories on cars, vans, trucks, snowmobiles, fibreglass boats etc. Standard Package: 0 Nuts 239-974 Thread Size -32 239-97 8-32 5/.5.438.447 239-985 0-32 3/8.227.750.20 239-99 /4-20 /2.87.25.42 Stock No. Hole Panel Thick. Size Max. 5/.5 Flange Dia..42 Shank Length.437 BLIND WELL NUT GARAGE ASSORTMENT No. 020-08 Contains 20 nuts in -32, 8-32, 0-32, and /4-20. Packed in a clear plastic box. 020-08 MIRROR MOUNTING JACK NUT No. 239-90 Made of 00 Zinc Plated Steel this /4-20 Jack Nut with sealer has been designed for mounting outside mirrors to body panels. Legs of nut expand as screw is driven providing a positive, water-tight connection. Used with Papco Body Bolt No. 245-0 on page 42. May also be used to attach licence plates. Standard package 25 Pieces. 239-90 SERT-A-NUTS ECROUS D ANCRAGE 222 Papco Aluminum Sert-a-Nuts may be used in sheet metal, plastic, castings, fibreglass, or any rigid material. Sert-a-Nut has an unlimited grip range and no thickness barrier. Eliminates the need for tapping, welding or brazing. Kits include Setting Tool, Socket Screw and Hex Key.. Place screw through tool and thread into Sert-a-Nut flange side up. 2. Insert Sert-a-Nut into pre-drilled hole. 3. Hold tool with wrench, turn screw with key until tight. 4. Sert-a-Nut is now anchored solidly into hole. Stock No. 222-304 222-30 222-308 222-30 Size Drill SERT-A-NUTS -32 7/32 8-32 /4 0-24 9/32 /4-20 3/8 Standard Package Stock No. 25 25 25 25 222-34 222-3 222-38 222-320 Size Drill SERT-A-NUT KITS -32 7/32 8-32 /4 0-24 9/32 /4-20 3/8 SERT-A-NUT GARAGE ASSORTMENT No. 020-090 Contains 4 complete kits for -32, 8-32, 0-24 and /4-20 Sert-a-Nuts. Four sizes in a clear plastic box. 0 020-090 H. Paulin & Co., a division of The Hillman Group Canada ULC Inserts Per Kit 5 5 5 5

AN INTRODUCTION TO... EXPANSION PLUGS BOUCHONS D EXPANSION UNE INTRODUCTION. For a full listing of Papco Expansion Plugs and application guide, please refer to our current catalogue or visit our website to download a PDF version. EXPANSION PLUG KITS - BRASS - STEEL E-Z SEAL EXPANSION PLUGS EXPANSION PLUGS (IMPERIAL AND METRIC) - CUP TYPE - SHALLOW CUP TYPE - STANDARD CUP TYPE

EXPANSION PLUG KITS TROUSSES DE BOUCHONS D EXPANSION 20 DOMESTIC - IMPORT - TRUCKS - MARINE A time-saving kit for machine shops, engine rebuilders and Jobbers. Expansion plugs for each engine skin-packed in one convenient package. Coverage for Domestic and Import engines. BRASS / MARINE Year Cyl. Application Kit No. GM, MERCURY, OMC All (V8) 4.L (283 C.I.) 20-488 All (V8) 5.0L (305 C.I.) 20-488 STEEL Year Cyl. Application Kit No. AMC 997-87 (V) 4.0L (244) 20-40 988-7 (V) 4.2L (258) 20-402 BUICK 992-80 (4) 2.5L (5) 20-400 989-80 (V) 2.8L (73) W, X, Y, Z 20-407 200-85 (V) 3.0L (8) E, L 20-40 3.8L (23) A, B, G, 2, 3, 7, 8, 9 992-77 (V8) 5.0L (305) 20-425 990-80 (V8) 4.3L (20 ) Diesel; 5.0L (307) Y 20-43 5.7L (350) N Diesel CADILLAC 992-88 (V) 4.5L (273) 20-45 993-8 (V8) 5.0L (307) Y 20-43 5.7L (350) N Diesel CHEVROLET 2002-90 (4) 2.2L (34) 20-425 992-78 (4) 2.5L (5) 20-400 989-80 (V) 2.8L (73 ) W, X, Z, I 20-407 2005-88 (V) 3.8L (23) I, K, L 20-40 990-85 (V) 4.3L (22) 20-43 993-9 (V) 4.3L (22) Z 20-42 200-57 (V8) 25, 27, 283, 302, 305, 307, 20-425 327, 350 to 99 CHEVY/GMC 993-82 (V) 2.8L (73) 20-407 202-85 (V) 4.3L (22) N, Z 20-42 990-3 (V) 4.8L (292) 20-45 2005-7 (V8) 5.0L (305), (307); 5.4L (327) 20-425 2002-73 (V8) 5.7L (350) 20-425 2000-70 (V8).0L (3); 7.4L (454) 20-42 2002-82 (V8).2L (379) Diesel, (395) Diesel 20-42 Year Cyl. Application Kit No. CHRYSLER/DODGE 2000-82 (4) 2.2L (35) OHC 2.5L (53) OHC 20-434 2003-88 (V) 3.0L (8) 20-430 200-94 (V) 3.3L (20) 20-43 200-90 (V) 3.3L (20); 3.5L (25); 3.8L (230) 20-432 FORD/FORD TRUCK 20-84 (4) 2.3L (40) OHC 20-44 2009-8 (V) 3.0L (82) exc. SHO engine 20-448 2004-82 (V) 3.8L (232) 20-442 99-5 (V) 4.9L (300, 300) LD 20-450 202-97 (V8) 4.L (28) 20-457 200-8 (V8) 4.7L (289); 5.0L (302) 20-45 5.8L (35) W 997-73 (V8).L (370); 7.0L (429) 20-455 7.5L (40) OLDSMOBILE 995-89 (4) 2.3L (38) 20-48 992-78 (4) 2.5L (5), 5, 9, R, V 20-400 989-79 (V) 2.8L (73) W, X, Z 20-407 2000-88 (V) 3.0L (8) E, L 20-40 3.8L (23) A, B, C, 2, 3 4.L (252) 200-9 (V8) 4.3L (20) F, 8, (20) Diesel 20-43 5.0L (307) Y 5.7L (350) R, (350) N Diesel 992-77 (V8) 4.4L (27) J 20-425 5.0L (305), (350) G, L PONTIAC 99-87 (4).8L (2) J, O, OHC, 2G 20-48 2.0L (22) B, K, M, P 99-77 (4) 2.5L (5) F, R, U, V,, 2, 5, 9 20-400 989-79 (V) 2.8L (73) L, S, W, X, Z,, 7, 9 20-407 2008-85 (V) 3.0L (8) E, L, 20-40 3.8L (23) A, B, C, 2, 3 4.L (252) 992-77 (V8) 5.0L (305); 5.7L (350L) 20-425 2004-87 (V8) 5.7L (350R), (350N) Diesel 20-43.L (403) 2 H. Paulin & Co., a division of The Hillman Group Canada ULC

EXPANSION PLUGS BOUCHONS D EXPANSION 20 Also known as Frost Plugs, Welsh Plugs or Freeze-Out Plugs. Papco Expansion Plugs are made of heavy gauge plated steel or solid brass to resist rust. STANDARD TYPE TYPE REGULIER Standard Package / Contenant Régulier : 3 /8-5 /8 = 25 pcs. 47 /4-3 = 2 pcs. Stock No. STEEL Stock No. BRASS Nominal Plug Size Reference O.D. +/-.005 20-00 20-50 3/8.375 20-008 7/.437 20-00 20-50 /2.500 20-02 9/.53 20-04 5/8.25 20-0 -/.87 20-08 20-58 3/4.750 20-020 3/.82 20-022 27/32.844 20-024 20-524 7/8.875 20-02 20-52 5/.93 20-028 20-528.000 20-030 20-530 -/32.03 20-032 20-532 -/.03 20-034 20-534 -/8.25 20-03 20-53 -3/.88 O.D. Stock No. STEEL Stock No. BRASS Nominal Plug Size Reference O.D. +/-.005 20-039 20-539 -/4.250 20-042 -5/.33 20-045 20-545 -3/8.375 20-048 20-548 -7/.437 20-05 20-55 -3/4.484 20-054 -/2.500 20-057 20-557 -5/8.25 20-00 -47/4.734 20-03 20-53 -3/4.750 20-0 20-5 -7/8.875 20-09 20-59 2 2.000 20-072 2-/ 2.03 20-075 20-575 2-7/4 2.05 20-078 20-578 2-/4 2.250 20-08 2-/2 2.500 20-084 2-3/4 2.750 CUP TYPE TYPE D ASSIETTE Standard Package / Contenant Régulier = 2 pcs. Plated Steel or Solid Brass / Acier Plaqué ou laiton massif Stock No. Stock No. Nominal Reference H-Overall Stock No. STEEL BRASS Plug Size O.D. +/-.005 Height STEEL 20-00 /4.20.35 20-03 5/.335.29 20-05 3/8.385.240 20-08 7/.450.20 20-0 20-0 7/.4445.5 20-25/4.404.25 20-2 29/4.40.270 20-3 5/32.475.200 20-4 /2.527.32 20-5 /2.5.258 20-35/4.5425.250 20-7 33/4.52.248 20-8 9/.583.250 20-20 9/32.594.28 20-2 9/.57.250 20-25 2/32.58.2 20-2 20-2 5/8.325.250 20-27 43/4.2.235 20-28 /.7 00.250 20-29 4/4.35.233 20-30 20-30 3/4.7525.250 20-33 5/4.789.32 20-34 3/.82.32 20-3 7/8.888.32 20-38 20-38 29/32.92.390 20-40 20-40 59/4.925.335 20-4 7/8.89.32 20-42 5/.945.375 20-43 /4.95.272 20-44 20-44.04.28 20-45.009.295 20-4 -/.073.280 20-47 -5/4.072.280 20-50 20-50 -/8.33.437 20-53 -3/4.200.420 20-5 -7/32.228.53 O.D. Stock No. Nominal Reference BRASS Plug Size O.D. +/-.005 H-Overall Height 20-2* -/4.2575.343 20-5 -/4.258.437 20-8 - 3/8.3875.500 20-7 -7/.438.43 20-74 -/2.522.375 20-77 -/2.50.325 20-80 20-80 -/2.5075.25 20-83 -9/.57.00 20-8 20-8 -5/8.375.593 20-89 -4/4.42.350 20-92* -45/4.7075.82 20-93 -45/4.38.350 20-94 20-94 -3/4.725.33 20-98 20-98 -3/4.725.593 20-204 -3/4.750.35 20-207 20-707 -49/4.755.40 20-20 20-70 -7/8.8925.447 20-23 -57/4.883.2 20-2 -29/32.902.00 20-29 20-79 -5/.9475.800 20-222 20-722 -/4.9555.78 20-224 -/4.95.295 20-225 -3/4 2.000.800 20-228 20-728 2 2.009.35 20-23 2 2.008.45 20-234 20-734 2-/4 2.075.590 20-237 20-737 2-/ 2.075.50 20-240 2-3/32 2.0975.0 20-243 20-743 2-/8 2.45.430 20-24 2-9/4 2.485.00 20-249 2-3/ 2.99.30 20-252 20-752 2-/4 2.25.82 20-255 2-7/4 2.24.355 20-20 2-/2 2.504.350 20-22 2-/2 2.500.340 H.800.28.4000 www.hpaulin.com 3

EXPANSION PLUGS BOUCHON D EXPANSION 20 H O.D. SHALLOW CUP TYPE TYPE D ASSIETTE PEU PROFOND Plated Steel or Solid Brass / Acier Plaqué ou laiton massif Stock No. Stock No. Nominal Reference H-Overall STEEL BRASS Plug Size O.D. +/-.005 Height 20-303 7/.440.70 20-305 29/4.450.203 20-307 /2.505.250 20-308 7/32.54.87 20-309 35/4.5425.87 20-3 5/8.3.90 20-32 45/4.700.205 20-33 53/4.8235.250 20-35 20-85.00.290 20-38 20-88 -/4.225.32 20-32 -2/4.3225.28 20-324 20-824 -3/8.385.340 20-327 20-827 -/2.505.300 20-330 -9/.570.35 20-333 20-833 -5/8.40.345 20-33 -45/4.703.28 20-339 20-839 -3/4.72.232 20-342 -5/4.8025.250 Standard Package / Contenant Régulier =2 pcs. Stock No. STEEL Stock No. BRASS Nominal Plug Size Reference O.D. +/-.005 H-Overall Height 20-345 -53/4.825.350 20-348 -29/32.95.25 20-35 -59/4.922.235 20-354 -3/32.9775.28 20-357 2 2.025.40 20-359 20-859 2 2.00.30 20-32 2-/4 2.075.240 20-35 20-85 2-/ 2.0725.343 20-3 2-/ 2.02.343 20-372 2-7/4 2.09.30 20-375 2-9/4 2.35.30 20-378 2-5/32 2.535.328 20-38 20-88 2-3/ 2.200.355 20-383 2-3/ 2.92.343 20-385 2-7/32 2.2205.305 20-388 2-/4 2.22.350 20-39 2-3/8 2.385.32 20-394* 2-9/ 2.575.30 * With reverse taper GARAGE ASSORTMENT No. 020-048 Contains 50 Standard and Cup Type expansion plugs. For more details see page 3. 020-048 MASTER ASSORTMENTS No. 020-33 Contains 0 Cup & Shallow Cup Types. For more details see page 8. No. 020-40 Contains 40 Standard & Cup Types. For more details see page 8. 020-33 020-40 SUPER SERVICE ASSORTMENTS No. 020-800 Contains 200 Standard & Cup Types. See page 0 for more details. 020-800 No. 020-80 Contains 70 Cup & Shallow Cup Types. See page 0 for more details. 4 H. Paulin & Co., a division of The Hillman Group Canada ULC

METRIC EXPANSION PLUGS BOUCHON D EXPANSION MÉTRIQUE 2 H O.D. O.D. STANDARD TYPE TYPE REGULIER Plated Steel / Acier Plaqué Standard Package / Contenant Régulier = 0 pcs. Stock No. Nominal O.D. 2-0 mm 2-04 8 mm 2-024 24 mm 2-02 25 mm 2-04 35 mm Stock No. Nominal O.D. 2-04 40 mm 2-09 42 mm 2-077 45 mm 2-090 52 mm 2-09 55 mm SHALLOW CUP TYPE TYPE D ASSIETTE PEU PROFOND Plated Steel / Acier Plaqué Standard Package / Contenant Régulier = 0 pcs. Stock No. Nominal O.D. 2-32 25 mm 2-347 35 mm 2-34 40 mm Stock No. Nominal O.D. 2-37 42 mm 2-377 45 mm CUP TYPE TYPE D ASSIETTE Stock No. Nominal O.D. Standard Package / Contenant Régulier = 0 pcs. H - Nominal Height (mm) 2-03 mm 4.85 2-05 2 mm 5.3 2-07 4 mm 5.0 2-08 4.4 mm 5.5 2-09 5 mm 5.5 2- mm 9. 2-4 8 mm 5.9 2-7 20 mm 7.0 2-8 20 mm.0 2-2 22 mm 7.5 2-24 24 mm.9 2-2 25 mm 8.3 2-29 27 mm 8.4 2-32 28 mm 8.7 2-35 29 mm.4 2-38 30 mm 8. 2-40 3.5 mm 8.5 2-42 32 mm 9.5 2-45 34 mm 2.7 Stock No. Nominal O.D. H H - Nominal Height (mm) 2-4 35 mm 0. 2-49 3 mm 8.5 2-50 3.5 mm 9.0 2-55 38 mm 7.9 2-58 39 mm 9.5 2-40 mm.7 2-2 40 mm 2.8 2-5 4 mm.9 2-70 42.3 mm 0.0 2-7 42. mm 0.0 2-73 44 mm.9 2-77 45 mm.9 2-78 45 mm 3.5 2-8 47 mm 7.4 2-84 49.5 mm.0 2-85 50 mm 2.0 2-8 50 mm 4.8 2-88 5 mm 5.55 O.D. MASTER ASSORTMENTS No. 020- Contains 20 Metric Standard & Cup Types. See page 8 for more details. SUPER SERVICE ASSORTMENTS No. 020-840 Contains 80 Metric Standard & Cup Types. See page 0 for more details. 020-020-840 No. 020-84 Contains 50 Metric Cup & Shallow Cup Types. See page 0 for more details..800.28.4000 www.hpaulin.com 5

E-Z SEAL EXPANSION PLUGS BOUCHONS D EXPANSION E-Z SEAL 23 An Expansion Plug designed to save mechanic s time... will save hours of repair time in replacing core hole plugs, by simply tightening, even when Starter, Generator, Distributor, Manifold, Steering Linkage or Air Conditioner Components interfere. Slips in easily. Can be finger-tightened. Permanently set with open end wrench. No metal comes in contact with the coolant. Body of plug is specially compounded Neoprene, resistant to heat, antifreeze, and rust inhibitors. Expands as much as /8 to seal tightly against irregularities. EXPANSION PLUGS OIL DRAIN PLUGS Order by Stock Number Stock No. Size Metric Equiv. 23-548 3/4 9 mm 23-55 7/8 22 mm 23-54 25 mm 23-572 -/8 29 mm Stock No. Size Metric Equiv. 23-580 -/4 32 mm 23-588 -3/8 35 mm 23-59 -/2 38 mm 23-04 -5/8 4 mm Stock No. Size Metric Equiv. 23-2 -3/4 45 mm 23-28 2 5 mm 23-3 2-/8 54 mm 23-44 2-/4 57 mm Stock No. Size Metric Equiv. `E-Z SEAL OIL DRAIN PLUGS 23-290 7/ 2 mm 23-320 /2 3 mm 23-322 9/ 4 mm 23-400 5/8 mm Install dry. Do not use sealer. Do not use where petroleum products contact rubber. Do not overtighten. Installez à sec. N employez pas de l adhésif. N employez pas où des produits de pétroleum viendront en contact avec le néoprène. Ne pas trop serrer. Make sure washer and nut are loose. Assurez-vous que la rondelle et l écrou ne sont pas lâches. 2 Washer must be flush with side of wall before and after plug is installed. La rondelle doit être égale avec le côté du mur avant d être installée. Plug must extend /4 beyond inside wall to allow a ridge to form. Le tampon doit dépassé le mur intérieure d aux moins /4 de pouce pour permettre la formation d un coussin. Turn the nut clockwise 2 or 3 turns to form a ridge and properly set plug. Pour bien placer le tampon, serrez l écrou de 2 ou 3 tours. When properly installed, plug will hold pressure to 50 P. S. I. Quand bien installé, le tampon soutiendra une pression de 50 P. S. I. MERCHANDISER No. 022-23 Includes Rack, Header Sign, Inventory Control, Planogram and a 20 card stock of `E-Z Seal Plugs listed above. ASSORTMENT No. 020-38 Contains 3 `E-Z Seal Expansion Plugs - one of each size. Have every size on hand - repair leaking metal frost plugs in all locations - whether hard or easy to get to. Contient 3 bouchons d expansion `E-Z Seal - un de chaque format. Ayez tous les formats en main. Réparez les bouchons en métal protégeant contre la gelée à tous les endroits - difficiles ou faciles à rejoindre. H. Paulin & Co., a division of The Hillman Group Canada ULC

AN INTRODUCTION TO... DRAIN PLUGS BOUCHONS DE VIDANGE UNE INTRODUCTION. For a full listing of Papco Oil Drain Plugs and application guide, please refer to our current catalogue or visit our website to download a PDF version. DRAIN AND FILLER PLUGS DRAIN PLUGS GASKET OIL DRAIN PLUG REPAIR DUO-DRAIN OIL PLUG CARDED MAGNETIC DRAIN with GASKET MAGNETIC DRAIN PLUG with GASKET

DRAIN AND FILLER PLUGS BOUCHONS DE VIDANGE ET REMPLISSAGE 23 Papco Drain Plugs are manufactured in nine types and are available in Inch and Metric sizes. Type 2 oversize plugs are tapered, hardened and cut their own thread where the original has been stripped. To use an oversize plug, hold in a straight position and tighten with a socket wrench. Plug is then removed to clear metal particles and then reinstalled. Each Drain Plug is supplied with a gasket, as indicated in the gasket chart, with an asterisk (*) unless otherwise indicated. Type Standard with Pilot Type 2 Self-Tapping Oversized Type 3 Standard Type 4 Washer Head Standard Type 5 Pilot Point w/ Inset Gasket Type Pilot Point w/ Moulded Gasket Type A Drain Plug Type 7 Duo-Drain Piggyback Type 8 Magnetic Type 9 Sq. Head Pipe Plug GASKETS 70, 778, 99, 92, 97, 937, 942, 944, 947 DRAIN PLUGS Stock No. 7, 72, 73, 75, 95, 945 720, 750, 93 Size & Thread 93, 94, 922, 92, 928, 930, 933, 934, 940, 954, 974, 984 Type 99, 932 Std. Pkg. 23-70 /2-20 Std. 5 23-7 /2-20 S.O. Self-Tap 2 2 23-72 /2-20 D.O. Self-Tap 2 2 23-73 /2-20 T.O. Self-Tap 2 2 23-74 /2-20 Magnetic 8 5 23-75 /2-20 D.O. Duo-Drain 7 5 23-7 /2-20 Std. Duo-Drain 7 5 23-78 /2-20 Pilot Pt. w/ Molded Gasket 5 23-720 5/8-8 Std. 3 5 23-750 3/4- Std. 3 5 23-75 3/4- S.O. Self-Tap 2 5 23-778 /2-20 Std. 5 23-795 /2-20 Magnetic 8 5 23-908 M2 x.75 Pilot Pt. w/ Moulded Gasket 5 23-9 M2 x.75 Std. with Pilot Pt. 5 23-92 M2 x.25 Std. with Pilot Pt. 5 23-93 M2 x.25 Std. 4 5 23-94 M4 x.5 Std. 4 5 23-95 M4 x.5 S.O. Self-Tap 2 5 23-97 M4 x.5 Std. with Pilot 5 23-99 M2 x.75 Pilot Pt. w/inset Gasket 5 23-922 M4 x.25 Std. 4 5 23-923 M4 x.5 Pilot Pt. w/ Molded Gasket 5 23-924 M4 x.5 Magnetic 8 5 23-925 M4 x.5 Pilot Pt. w/ Inset Gasket 5 23-928 M8 x.5 Std. 4 5 23-929 M2 x.75 Magnetic w/pp & Inset Gasket 8 5 23-930 M20 x.5 Std. 4 5 23-93 M2 x.5 Std. 3 5 23-932 M2 x.75 Pilot Pt. w/ Inset Gasket 5 5 23-933 M2 x.25 Std. 4 5 23-934 M4 x.5 Std. 4 5 23-937 M4 x.5 Pilot Pt. 5 23-940 M22 x.5 Std. 4 5 23-942 M2 x.25 Pilot Pt. 5 23-944 M2 x.75 Pilot Pt. 5 23-945 M2 x.75 S.O. Self-Tap 2 5 23-947 M4 x.5 Pilot Pt. 5 23-950 M4 x.5 Std. w/inset Gasket 5 5 23-954 M4 x.5 Std. 4 5 23-958 M4 x.5 Pilot Pt. w/ Inset Gasket 5 5 23-90 M 4 x.5 Std. 5 5 23-97 M4 x.5 Std. w/floating Gasket A 5 23-974 M4 x.5 Std. 4 5 23-984 M4 x.5 Std. 4 5 23-990 UNIV. /2-3/4, 2-8mm - 3 20-902 /4 Sq. Pipe Plug 9 2 20-903 3/8 Sq. Pipe Plug 9 2 20-904 /2 Sq. Pipe Plug 9 2 7, 908, 923, 925 97 75, 7 74, 795, 924, 929 902, 903, 904 Nylon, Fibre, Crush, Copper, Aluminium, Rubber / Metal, Rubber, Synthetic GASKETS All Gasket Standard Packages 25 Pieces Nylon Fibre Copper Crush Aluminum Rubber / Metal Rubber Synthetic 23-8* 23-800 23-85 23-89 23-875 23-885 23-8* 23-80 23-85 23-844 23-875 23-87* 23-80 23-857 23-870 23-87* 23-802 23-80 23-8* 23-800 23-85 23-875 23-87* 23-80 23-857 23-870 23-8* 23-800 23-85 23-875 N/R N/R N/R N/R N/R N/R N/R N/R 23-820* 23-857 20-824* 23-804 23-85 23-824* 23-805 23-85 23-8 23-800 23-85 23-89 23-875* 23-885 23-8 23-800 23-85 23-89 23-875* 23-885 N/R N/R N/R N/R N/R N/R N/R N/R 23-85* 23-808 23-855 23-89 23-875 23-874 23-85* 23-808 23-855 23-89 23-875 23-874 23-85* 23-808 23-855 23-89 23-875 23-874 23-87* 23-80 23-85 23-844 23-870 23-87 23-87* 23-80 23-87* 23-80 23-85 23-844 23-870 23-87 N/R N/R N/R N/R N/R N/R N/R N/R 23-87* 23-80 23-85 23-844 23-870 23-87 N/R N/R N/R N/R N/R N/R N/R N/R 23-87* 23-80 23-85 23-844 23-870 23-87 N/R N/R N/R N/R N/R N/R N/R N/R 23-824 23-80* 23-873 N/R N/R N/R N/R N/R N/R N/R N/R 23-824 23-807 23-85* 23-85 23-808 23-855 23-89* 23-875 23-874 N/R N/R N/R N/R N/R N/R N/R N/R 23-85 23-808 23-855 23-89 23-875 23-874 23-885* 23-87 23-80 23-85 23-844 23-870* 23-87 23-87 23-80 23-85 23-844 23-870 23-87* 23-828* 23-85 23-808 23-855 23-89* 23-875 23-874 23-885 23-85 23-808 23-855 23-870 23-875* 23-874 23-87 23-80 23-855 23-844 23-870 23-87* 23-87 23-80 23-85* 23-844 23-870 23-87 N/R N/R N/R N/R N/R N/R N/R N/R 23-87 23-80 23-85* 23-844 23-870 23-87 N/R N/R N/R N/R N/R N/R N/R N/R 23-87 23-80 23-85 23-844 23-870* 23-87 N/R N/R N/R N/R N/R N/R N/R N/R 23-87 23-80 23-85 23-844* 23-870 23-87 23-87 23-80 23-85 23-844 23-870 23-87* N/R N/R N/R N/R N/R N/R N/R N/R * Indicates type of gasket supplied with plug. FOR A MORE COMPREHENSIVE LISTING OF THESE PARTS, PLEASE REFER TO OUR CURRENT OIL DRAIN PLUGS CATALOGUE 8 H. Paulin & Co., a division of The Hillman Group Canada ULC

DRAIN PLUG GASKETS JOINTS POUR BOUCHONS DE VIDANGE 23 Papco Selon Drain Plug Gaskets are made of special nylon with excellent mechanical properties and long life. Also available are copper and fibre gaskets as well as aluminium, rubber/metal and synthetic gaskets. Fibre Nylon Crush Copper Alum. Rubber Synthetic Order by Stock Number Standard Packages 25 Pieces Part # I.D. x O.D. x Thick Part # I.D. x O.D. x Thick Part # I.D. x O.D. x Thick 23-800 Fibre /2 x 3/4 x 3/32 23-8 Nylon 9/ x 3/ x.052 23-80 Copper 3/4 x -/ x.02 23-80 Fibre 9/ x 3/ x 3/32 23-87 Nylon 5/8 x 5/ x.059 23-89 Alum. 5/32 x 7/8 x.080 23-802 Fibre 5/8 x 7/8 x 3/32 23-820 Nylon / x x.02 23-870 Alum. 4mm x 20mm x.078 23-804 Fibre 3/4 x -/ x 3/32 23-824 Nylon 3/ x -/ x.082 23-873 Alum. 8mm x 2mm x.078 23-805 Fibre 3/ x x 3/32 23-828 Nylon 3/4 x -/4 x.078 23-874 Rubber 2mm x 20mm x.02 23-807 Fibre.920 x -/8 x 3/32 23-844 Crush 7/32 x 3/4 x.080 23-875 Rubber/Met.2mm x 25mm x.078 23-808 Fibre 2mm x.748 x 3/32 23-85 Crush 25/32 x x.087 23-87 Rubber/Met.7/32 x 3/32 x.08 23-809 Fibre mm x.02 x 3/32 23-855 Copper 3/4 x 3/4 x.094 23-885 Synthetic 5/32 x 5/ x.078 23-80 Fibre 8mm x.02 x 3/32 23-85 Copper 9/32 x 3/ x.02 23-85 Nylon 3/4 x 3/4 x.052 23-857 Copper 5/8 x x.02 OIL DRAIN PLUG REPAIR RÉPARATION DE BOUCHON DE VIDANGE 23 No. 23-990 Exclusively patented winged drain plug is used when the oil pan or flange is broken or missing. Eliminating the need to replace the pan. Part number 23-990 is a time and money saver for pans with /2 to 3/4 or 2mm to 8mm drain holes. Requires no tools to install. 23-990 Clamp Threaded Rod Rubber Seal Fig. Fig. 2 Fig. 3 CAUTION: DO NOT use on Honda or Volkswagen. Make sure threaded bolt will not contact any internal parts before installation. Bolt enters oil pan -7/8. CAUTION: This type of plug is designed to be HAND TIGHTENED ONLY..800.28.4000 www.hpaulin.com 9

DUO-DRAIN OIL PLUGS BOUCHONS D HUILE DUO-DRAIN 23 BRIGHT PLATED All metal, two-part plug for repairing /2-20 crankcase applications on GM, Ford, Chrysler and AMC. STANDARD or Self-tapping DOUBLE OVERSIZE outer plug installs permanently. Only the pipe threaded centre plug is removed to drain oil. Convenient skin-packed card contains one () Duo-Drain Oil Plug complete with gasket. /2 Standard No. 23-798 /2-20 D.O. No. 23-799 CARDED DRAIN PLUGS WITH GASKET BOUCHONS DE VIDANGE AVEC JOINT Card No. Size & Type 23-777 M4 x.5 Pilot Pt. 23-780 M2 x.75 Std. Pilot Pt. 23-782 /2-20 T.O. Self-Tap 23-783 /2-20 Magnetic 23-784 M4 x.5 Magnetic 23-78 M4 x.5 Pilot Pt. 23-787 M2 x.75 Pilot Pt. 23-788 M2 x.75 Pilot Pt. Card No. Size & Type 23-790 /2-20 Std. 23-79 /2-20 S.O. Self-Tap 23-792 /2-20 D.O. Self-Tap 23-793 /2-20 T.O. Self-Tap 23-794 /2-20 Magnetic 23-79 M4 x.5 Pilot Pt. 23-797 M2 x.75 Magnetic 23-798 M4 x.5 23-799 /2-20 Duo /2-20 S.O. M2 x.75 Pilot Pt. with Inset Gasket 23-79 MAGNETIC DRAIN PLUGS WITH GASKET BOUCHONS DE VIDANGE MAGNÉTIQUE AVEC JOINT 23 Papco Magnetic Drain Plugs reduce wear and protect engines by attracting harmful metal particles circulating in the crankcase oil. Powerful, long-lasting ALNICO magnet. Install in place of ordinary plugs. Individually skin-packed with gasket. Card No. Size & Thread Gasket 23-783 /2-20 Magnetic 23-87 23-784 4mm x.5 Magnetic 23-87 Card No. Size & Thread Gasket 23-794 /2-20 Std. Magnetic 23-8 23-797 M2 x.75 Pilot Pt.- with Inset Gasket /2-20 S.O. Magnetic 23-783 70 H. Paulin & Co., a division of The Hillman Group Canada ULC

DRAIN PLUGS WITH GASKET BOUCHONS DE VIDANGE AVEC JOINT GARAGE ASSORTMENT No. 020-032 Contains 7 Self-Tappinig Oversize Drain Plugs with gaskets. (4) /2-20 O.S.; (2) /2-20 D. O.; () /2-20 T.O. 020-032 GARAGE ASSORTMENT No. 020-038 Contains 9 Inch and Metric Drain Plugs with gaskets. (4) /2-20 Std. (3) 2mm x.75, (2) 4mm x.5. 020-038 GARAGE ASSORTMENT No. 020-054 Contains 0 Nylon Gaskets in six popular sizes for Inch and Metric Drain Plugs. 020-054 MASTER GASKET ASSORTMENT No. 020-07 Contains 20 pieces - 20 of the most popular sizes of Nylon, Copper, Fiber, Aluminum and Rubber/Metal Drain Plug Gaskets. 020-07 MASTER DRAIN PLUG ASSORTMENT No. 020-30 Contains 40 Inch and Metric Drain Plugs; 73 Gaskets - and includes: - Magnetic and /2-20 oversize plugs. - 7 sizes of Plugs, 8 Sizes of Gaskets. - Complete coverage for most vehicles. 020-30.800.28.4000 www.hpaulin.com 7

OIL DRAIN PLUG APPLICATION SUMMARY Use only as reference, for further information, please see AutoZoner for details OPTION OR MAKE ENGINE MODEL YEAR THREAD PLUG MAGNETIC PILOT POINT GASKET Acura 4, 5, Cyl MOST 98-200 M4-.50 5230 52 5294 5333 American Motors and 8 Cyl MOST 95-989 /2-20 5233 5203 5202 5330 American Motors 2.0, 2.5 Ltr MOST 980-983 M2-.75 52 522 523 5332 American Motors AMC Engines Eagle 983-984 M4-.25 5232 528 5333 Audi 4, 5 and Cyl MOST 973-998 M4-.50 5294 52 5230 5333 Audi 4, 5 and Cyl MOST 999-200 M4-.50 5294 52 525 5333 BMW.8, 2.5, 3.0 Ltr MOST 98-200 M2-.50 523 5332 Buick and 8 Cyl (3.2, 3.3, 3.8, 5.0, 5.7) MOST 90-995 /2-20 5233 5203 5202 5330 Buick.8 Ltr MOST 982-98 M4-.50 5230 52 525 5333 Buick 4 cyl, 2.0 Ltr Vin K 983-988 M4-.50 5230 52 525 5333 Buick 2.0, 2.2, 2.5, 2.8, 3., 4.3 Ltr MOST 980-994 M2-.75 52 522 52 5332 Buick and 8 Cyl MOST 995-20 M2-.75 5307 5309 5308 5329 Buick cyl. 3.8 Ltr 995-200 M2-.75 52 522 52 5332 Cadillac 4., 7.0, 7.7, 8.2 Ltr 9-98 /2-20 5202 5203 5202 5330 Cadillac 8 Cyl 4., 4.5, 4., 4.9 Ltr MOST 982-995 M2-.75 52 522 52 5332 Cadillac Except 3.0 Ltr MOST 99-200 M2-.75 5307 5309 528 5329 Cadillac 3.0 Ltr Catera 997-200 M4-.50 538 52 530 532 Chevrolet MOST 94-99 /2-20 5233 5203 5202 5330 Chevrolet 2.0, 2.8, 3., 3.4 Ltr MOST 987-997 M2-.75 52 522 52 5332 Chevrolet.0,.3 Ltr Metro 998-200 M4-.50 5294 52 533 532 Chevrolet 4cyl.,.8 Ltr Nova (import), Prizm 985-88,98-00 M2-.25 5305 524 5332 Chevrolet. Ltr Aveo 2004-200 M4-.50 538 52 530 532 Chevrolet 2.0,2.2, 2.4, 3., 3.5, 3.8, 3.9, 5.3, 5.7Ltr. MOST 997-200 M2-.75 5307 5309 5308 5329 Chevy / GMC TRK MOST 90-995 /2-20 5233 5203 5202 5330 Chevy / GMC TRK 4 Cyl 2.2, 2.5, 2.8 Ltr Various 987-994 M2-.75 52 522 52 5332 Chevy / GMC TRK 4 Cyl 2.2, 2.5 Ltr Various 99-994 /2-20 5233 5203 5202 5330 Chevy / GMC TRK Cyl 4.3 Ltr 995 is P series 995-200 M2-.75 52 522 52 5332 Chevy / GMC TRK 8 Cyl 4.8, 5.0, 5.3 (99-0), 5.7 Ltr MOST 995-200 M2-.75 52 522 52 5332 Chevy / GMC TRK., 2.0 Ltr Tracker 998-2003 M4-.50 5294 52 533 5333 Chevy / GMC TRK Diesel MOST 200-200 M4-.50 525 52 5333 Chevy / GMC TRK 8 Cyl.0,.2,.5, 7.0, 7.4 Ltr MOST, EX Diesel 997-200 M2-.75 5307 5309 5307 5329 Chrysler 3.7, 5.2, 5.9,.3,.,.8, 7.2Ltr MOST 92-98 /2-20 5233 5203 5202 5330 Chrysler 2.2, 3.3, 3.5, 3.7, 3.8, 5.2 Ltr MOST 982-997 /2-20 5284 5203 5202 5330 Chrysler 2.5, 2.7, 3.0 Ltr MOST 997-2000 M4-.50 5230 52 525 5333 Chrysler 2.4, 2.7, 3.0 Ltr MOST 200-2003 M4-.50 5285 52 525 532 Chrysler 2.4, 2.7, 3.5, 5.7,. Ltr MOST 2004-200 M4-.50 530 52 530 532 Chrysler Crossfire 2004-2008 M4-.50 525 52 525 5333 Dodge Cyl 3.5 Ltr, 8 Cyl all MOST 94-999 /2-20 5233 5203 5202 5330 Dodge. Ltr Omni 983-98 M20-.50 522 5298 Dodge.7 Ltr Omni 98-983 M4-.50 525 52 525 5333 Dodge.4,.5,. Ltr Colt, MOST 982-994 M4-.50 5294 52 533 5333 Dodge 4 Cyl 2.0, 2.4, 2.7 Ltr Intrepid, Neon, Stratua, Avenger 995-200 M4-.50 5285 52 530 5333 Dodge 2.0, 2.4, 2.7, 3.5, 5.7,., 8.4 Ltr MOST 200-200 M4-.50 530 52 5285 532 Dodge truck 3.7, 5.2, 5.9,.3, 7.2 Ltr MOST 93-982 /2-20 5233 5203 5202 5330 Dodge truck 2.4, 2., 3.0, 3.3, 3.7 Ltr Caravan, Mini Ram 983-993 M4-.50 5230 52 5294 5333 Dodge truck Cyl 5.9 Ltr Diesel 990-993 M8-.50 5220 5280 Dodge truck 3.9, 5.2, 5.2, 5.9 Ltr MOST 992-2003 /2-20 5284 5203 5284 5329 Dodge truck 5.9 Ltr Turbo Diesel 994-200 M22-.50 5288 5328 Dodge truck 3.3, 4.7 Ltr MOST 200-2003 M4-.50 5285 52 525 5333 Dodge truck 3.7, 4.7, 5.7 Ltr MOST 2004-200 M4-.50 5285 52 530 532 Eagle.5,.8 Ltr Summit 989-98 M4-.50 5294 52 5230 5333 Eagle.5,.8, 2.0, 2.4 Ltr Talon, MOST 990-998 M4-.50 5294 52 53 5333 Eagle 3.5 Ltr Vision ESI, TSI 993-97 /2-20 5284 5203 5284 5329 Ford 3.3, 3.9, 4., 5.0,.8,.4,., 7.0, 7.5 Ltr MOST 958-98 /2-20 5233 5203 5202 5330 Ford.,.9, 2.0, 2.3, 3.8, Ltr MOST 97-995 M4-.50 5230 52 525 5333 Ford 4.2, 5.0, 5.8 Ltr LTD, Mustang, Crown Vic, MOST 982-99 /2-20 5233 5203 5202 5330 Ford 4 Cyl Aspire, Festiva, Escort, Probe 984-97 M4-.50 5294 52 525 5333 Ford Cyl 3.0, 3.2 Incl Taurus SHO 989-99 M4-.50 5230 52 525 5333 Ford Cyl 2.5 (95-98), 3.8 Ltr Contour, Mustang 995-2000 M2-.75 5307 52 53 5329 Ford 3.0 Ltr Taurus 99-999 M4-.50 5285 52 530 532 Ford 4 cyl 2.0 Ltr Contour 998-2000 M4-.50 530 52 5285 532 Ford 4 Cyl 2.0 Ltr Focus, Escort - MOST 998-2004 M4-.50 530 52 5285 532 Ford 4., 3.0 Most Mustang, Crown Vic, Taurus 998-200 M4-.50 53 52 53 532 Ford 4 Cyl 2.0 Ltr (PFOG) Escort, Focus 2000-2004 M2-.75 5307 522 52 5332 Ford 4, Cyl MOST 200-2009 M2-.75 5307 5309 5308 5329 Ford 2.0, 2.3, 2.5 Ltr Focus, Fusion 2005-200 M4-.50 530 52 5285 532 Ford 3.5, 5.4 Ltr Fusion, Mustang 200-200 M2-.75 5307 5309 528 5329 Ford truck 4.9, 5.0, 5.8 (vans),.9 (vans) Ltr Most, E and F 93-99 /2-20 5233 5203 5202 5330 Ford truck 8 Cyl.9, 7.3 (444 cu in) Ltr.9 83-87, 7.3 88-89 983-989 /2-20 5233 5203 5202 5330 Ford truck 2.0, 2.3, 2.9, 3.0, 3.8, 4.0, 4., 5.4, 7.5 Ltr MOST 983-2000 M4-.50 5230 52 525 5333 Ford truck.0,.4, 7.3 Ltr Super Duty 990-200 M4-.25 5232 528 5232 5333 Ford truck 4.2 Ltr MOST 995-2000 M2-.75 528 5309 5307 5329 Ford truck 3.0, 3.5, 4.2 Ltr Edge, Escape, Flex, Freestyle 998-200 M2-.75 5307 5309 528 5329 Ford truck 3.0, 3.5, 4., 5.4,.8 Ltr MOST 997-200 M4-.50 53 52 530 532 Geo 3 and 4 Cyl All except Storm 989-200 M4-.50 5294 52 533 5333 Geo 4 Cyl. (89-97),.8 (93-0) Ltr Prizm 989-997 M2-.75 52 522 52 5332 r 975 OIL DRAIN PLUGS AND GASKETS MERCHANDISER PRÉSENTOIR DE BOUCHONS DE VIDANGE ET JOINTS No. 9985 42 SKUs of the best plugs and gaskets for domestic and import vehicles Prepack includes 84 clamshells. Planogram space specifications: inches wide x 24 inches tall. 42 peg hooks included. Merchandise on standard peg board. Products include merchandise location code Laminated hanging application guide included Please contact your local sales representative for additional information Use only as reference, for further information, please see AutoZoner for details OPTION OR MAKE ENGINE MODEL YEAR THREAD PLUG MAGNETIC PILOT POINT GASKET Honda.2,.5,. Ltr Accord, Civic, Prelude 99-982 M20-.50 522 Honda.8, 2.0, MOST 983-200 M4-.50 5294 52 5230 5333 Hummer 5.7,.2,.5 Ltr H 992-200 /2-20 5233 5203 5202 5330 Hummer 3.7, 5.3,.0 Ltr H2-H3 2003-200 M2-.75 5307 5309 5308 5329 Hyundai 4 Cyl All (87-0), Cyl All (90-0) 987-200 M4-.50 5230 52 525 5333 Infiniti and 8 Cyl All Incl: 99-00 QX4 99-200 M2-.25 524 524 5332 Isuzu 4 and Cyl MOST MOST 98-993 M4-.50 5230 52 525 5333 Isuzu truck 4 Cyl 2.2 Ltr, Cyl 4.3 Ltr Hombre, Ascender 997-2008 M2-.75 5307 7309 5307 5329 Isuzu truck Cyl 3. Ltr P/U, Rodeo 99-99 M2-.75 52 522 52 5332 Jaguar 4.2, 5.3,.0 Ltr MOST 97-99 M-.50 53 5280 Jaguar 8 Cyl 4.0 Ltr XK8 997-2000 M4-.50 5230 52 525 5333 Jeep 3.8, 4.2, 4., 5.9,. Ltr MOST 972-990 /2-20 5233 5203 5202 5330 Jeep 2.5 Ltr CJ,Scrambler, Wagoneer 98-984 M2-.75 52 522 52 5332 Jeep 2.,2.5, 2.8, 4.0, Ltr Wagoneer, Commanche, Cherokee 985-990 M4-.25 5232 5305 5333 Jeep 2.4, 2.5, 4.0, 5.2 Ltr MOST 99-2004 /2-20 5284 5203 5284 5329 Jeep 3.7, 4.7 Ltr Liberty, Commander, Grand Cherokee 2004-200 M4-.50 5285 52 53 532 Jeep 2.0, 2.4, 3.8, 5.7,. Ltr Compass, Patriot, Grand Cherokee 2007-200 M4-.50 530 52 53 532 Kia 4 Cyl.,.8 Ltr Sephia & Sportage 993-200 M4-.50 5230 52 525 5333 Lexus MOST and 8 Cyl 992-200 M2-.25 5305 524 5332 Lincoln MOST 957-977 /2-20 5233 5203 5202 5330 Lincoln 3.8, 4. Ltr Continental, Mark VIII, Town Car 989-997 M4-.50 525 52 525 5333 Lincoln 3.9, 4., 5.4 Ltr Various 998-200 M4-.50 53 52 530 532 Lincoln 8 Cyl 5.0, 7.5 Ltr 978-990 /2-20 5233 5203 5202 5330 Lincoln 3.0, 3.5, 3.7 Ltr LS(2000), MKZ, MKS 2000-200 M2-.75 5307 7309 5307 5329 Mazda 3.0, 3.7 Ltr MOST Trucks Exc B3000,B4000 200-200 M2-.75 5307 7309 5307 5329 Mazda MOST 2, 4 & Cyl And B3000 and B4000 984-2007 M4-.50 5294 52 525 5333 Mercedes-Benz 4.2, 4.5, 5.0, 5.,.0 Ltr MOST 972-998 M2-.50 523 5332 Mercedes-Benz 2.2, 2.3, 2.4, 2.5, 2., 3.2, 3.4, 5.0 MOST 974-200 M4-.50 525 52 525 5333 Mercury 3.3, 4.2, 5.8,.0,.4, 7.0 Ltr MOST 93-983 /2-20 5233 5203 5202 5330 Mercury 5.0 Ltr MOST 972-990 /2-20 5233 5203 5202 5330 Mercury 2.3, 2.,. Ltr MOST 974-994 M4-.50 5230 52 525 5333 Mercury., 3.0, 3.8 Ltr MOST 98-99 M4-.50 5230 52 525 5333 Mercury 2.0 Ltr Topaz, Lynx Mystique 984-997 M4-.50 5230 52 5294 5333 Mercury 2.0, 2.5 Ltr Tracer, M Mystique, Cougar 997-2002 M2-.75 528 5309 528 5329 Mercury 3.3 Ltr Villager Wagon 999-2002 M2-.25 5305 524 5332 Mercury 2.3, 2.5 Ltr Mariner, Milan 2005-200 M4-.50 53 52 53 532 Mercury 4.0, 5.0 Ltr Mountaineer 998-200 M4-.50 530 52 530 532 Mercury 4.2 Ltr Monterey 2004-2007 M2-.75 5307 7309 5307 5329 Mercury 4. Ltr Mountaineer, G Grand Marquis 998-200 M4-.50 53 52 53 532 Merkur 4 and Cyl 985-89 M4-.50 5230 52 525 5333 Mitsubishi MOST 4 and Cyl MOST 983-200 M4-.50 5294 52 525 5333 Mitsubishi 4 Cyl 2.0, 2.4 Ltr Eclipse 998-999 /2-20 5284 5203 5284 5329 Nissan 4 and Cyl MOST 98-983 M.4-.33 5235 5280 Nissan 4 and Cyl MOST 984-2009 M2-.25 5305 524 5332 Oldsmobile 4,, and 8 Cyl MOST 9-994 /2-20 5233 5203 5202 5330 Oldsmobile.8, 2.0, 2.5 Ltr MOST 983-987 M4-.50 5230 52 525 5333 Oldsmobile 2.8, 3., 3.4, 3.5 Ltr MOST 987-994 M2-.75 52 522 52 5332 Oldsmobile 2.3 Ltr Achieva, Cutlass Supreme 990-99 M2-.75 5308 7309 5308 5329 Oldsmobile Cyl 4.3 Ltr Bravadaada 99-994 /2-20 5233 5203 5202 5330 Oldsmobile 2.2 Ltr Cutlass Cierra 992-995 M4-.50 5230 52 525 5333 Oldsmobile 4.0 and 4.3 Ltr Bravada and d Aurora 99-200 M2-.75 52 522 52 5332 Oldsmobile 2.2, 2.4, 3., 3.8, 3.9 Ltr MOSTT 997-2004 M2-.75 5307 7309 5307 5329 Plymouth MOST 9-994 /2-20 5233 5203 5202 5330 Plymouth.4,.5,.,.8, 2.0 Ltr Colt, Laser 983-994 M4-.50 5294 52 525 5333 Plymouth. Ltr Turismo, Horizon 983-98 M20-.50 522 5325 Plymouth 3.3, 3.8 Ltr Voyager, Grand Voyager 990-999 /2-20 5284 5203 5284 5329 Plymouth 2.0, 2.4 Ltr Neon, Breeze 99-200 M4-.50 5285 52 524 532 Plymouth 3.0 Ltr Voyager, Grand Voyager, Acclaim 987-2000 M4-.50 5294 52 533 5333 Plymouth 3.3, 3.8 Ltr Voyager, Grand Voyager 2000 M4-.50 5285 52 525 5333 Pontiac MOST 95-993 /2-20 5233 5203 5202 5330 Pontiac 4 Cyl.8, 2.0 Ltr 982-988 M4-.50 5230 52 525 5333 Pontiac 4 Cyl., 2.0 Ltr 994-998 M4-.50 5230 52 525 5333 Pontiac 2.3 Ltr Grand Prix, Grand Am 990-99 M2-.75 5308 7309 5308 5329 Pontiac 2.5, 2.8, 4.3, 4.9 Ltr. MOST 979-988 M2-.75 52 522 52 5332 Pontiac 2.4, 2.8 Ltr Vibe 2003-200 M2-.25 5305 524 5332 Pontiac.8, 2.0, 2.2, 2.4, 3., 3.4, 3.5, 3., 3.8 Ltr MOST, Exc Vibe 998-2009 M2-.75 5307 7309 5307 5329 Saab 4 and Cyl MOST 980-2000 M4-.50 5230 52 525 5333 Saturn 3.0 Ltr 2000-2005 M4-.50 538 538 5333 Saturn.9, 2.0, 2.2, 2.4, 3.5, 3. Ltr MOST 99-2009 M2-.75 5308 5309 5307 5329 Subaru 3, 4 and Cyl MOST 975-200 M20-.50 522 522 5325 Suzuki 4 and Cyl MOST 98-2007 M4-.50 5230 52 5294 5333 Toyota 4, and 8 Cyl MOST 985-995 M2-.25 524 5208 5332 Toyota 2.8, 2.4 Ltr Supra, Cressida, Pickups 98-992 M8-.50 5220 5280 Toyota.5,.8, 2.0, 2.2, 3.0, 3.5 Ltr MOST 995-200 M2-.25 5305 524 5332 SKU : #99449 PN: LAMINATED March 202 98-985- kups 98-9 OST 995-20 5230 Old Style, 539 New PN: : LAMINAT NATED Application Guide Volkswagen MOST (5230 Old Style, 539 New 98-2009 M4-.50 5230 52 539 5333 OIL DRAIN PLUGS AND GASKETS MERCHANDISER Part No. Size Description Qty Part No. Size Standard Qty 400804 3/8 Square Pipe Plug 2 5232 M4 x.25 Standard 2 40084 /2 Square Pipe Plug 2 5230 M4 x.50 Standard (0.2 shank) 2 5200 /2 Universal Rubber Plug 2 5294 M4 x.50 Standard (0.4 shank) 2 520 5/8 Universal Rubber Plug 2 527 M4 x.50 S.O. Single Oversize 2 5202 /2-20 Standard (0.85 shank) 2 525 M4 x.50 Standard Pilot Point 2 5233 /2-20 Standard (0.5 shank) 2 530 M4 x.50 Standard Pilot Point w/inset Gasket (0.7 shank) 2 5284 /2-20 Standard Pilot Point w/inset Gasket 2 53 M4 x.50 Standard Pilot Point w/inset Gasket (0.75 shank) 2 5203 /2-20 Magnetic Standard 2 5285 M4 x.50 Standard Pilot Point w/inset Gasket (0.7 shank) 2 5204 /2-20 S.O. Self-Tap Single Oversize 2 52 M4 x.50 Magnetic Standard 2 5205 /2-20 S.O. Magnetic Single Oversize 2 533 M4 x.50 Standard (Easy Seal) 2 520 /2-20 D.O.S. Self-Tap Double Oversize 2 5220 M8 x.50 Standard 2 52933 3/4 Rubber Differential Plug 2 5288 M22 x.50 Standard 2 5305 M2 x.25 Standard 2 530 2mm Nylon 2 52 M2 x.75 Standard Pilot Point 2 5329 2mm Rubber 2 5307 M2 x.75 Standard Pilot Point w/inset Gasket (0.95 shank) 2 5280 M2-M8 Fiber Assortment 2 528 M2 x.75 Standard Pilot Point w/inset Gasket (0.8 shank) 2 528 M2-M Copper Assortment 2 5308 M2 x.75 Standard Pilot Point w/inset Gasket (0.95 shank) 2 5330 /2 Gasket Assortment 2 522 M2 x.75 Magnetic Standard 2 533 /2 O.S. Gasket Assortment 2 5309 M2 x.75 Magnetic Standard w/pilot Point & Inset Gasket 2 5332 M2 Gasket Assortment 2 523 M2 x.75 Self-Tap Single Oversize 2 5333 M4 Gasket Assortment 2 524 M2 x.25 Standard Pilot Point 2 5334 M8-M22 Gasket Assortment 2 72 H. Paulin & Co., a division of The Hillman Group Canada ULC

RINGS AND KEYSTOCK ANNEAUX ET CLÉS SNAP RINGS SNAP RING PLIERS WOODRUFF KEYS O -RINGS, UNIVERSAL AXLE SHAFT KEY STOCK AXLE KEYS HOLE PLUGS MECHANICS WIRE

SNAP RINGS CIRCLIPS 28 High Carbon Steel Retainer Rings Heat Treated for Resiliency Used as retainers on automotive, appliance and heavy equipment applications. Packaged in uniformly priced transparent packs. Number of rings per pack is shown below. A A A A A A -200 Internal -300 Internal -400 External -500 External -00 External -700 External Stock No. Industry No. Housing Dia. Free Dia. A Pieces Per Pack Stock No. Industry No. Shaft Dia. Free Dia. A Pieces Per Pack Internal Types (Housing) External Types (Shaft) 28-222 5000-50 /2.548 0 28-43 500-3 -5/.24 4 28-224 5000-2 5/8.94 0 28-438 500-37 -3/8.272 4 28-22 5000-75 3/4.83 8 28-440 500-50 -/2.387 3 28-227 5000-8 3/.90 8 28-442 500-75 -3/4.8 2 28-228 5000-87 7/8.97 28-444 500-200 2.850 2 28-230 5000-00. 28-505 533-2 /8.094 8 28-23 5000-0 -/.80 5 28-50 533-5 5/32.4 8 28-232 5000-2 -/8.249 5 28-50 533-8 3/.22 8 28-234 5000-25 -/4.388 4 28-5 533-8 3/.45 8 28-237 5000-37 -3/8.52 4 28-54 533-25 /4.207 8 28-238 5000-50 -/2.0 3 28-5 533-3 5/.243 8 28-242 5000-75 -3/4.942 2 28-58 533-37 3/8.300 4 28-24 5000-200 2 2.20 2 28-520 533-43 7/.337 4 28-329 5008-093 5/.05 28-522 533-50 /2.392 2 28-330 5008-00.08 28-0 544-5 5/32.3 8 28-332 5008-2 -/8.27 5 28-0 544-8 3/.43 8 External Types (Shaft) 28-4 544-25 /4.204 8 28-44 500-25 /4.225 5 28-544-3 5/.242 8 28-48 500-37 3/8.338 4 28-8 544-37 3/8.292 4 28-422 500-50 /2.4 0 28-20 544-5 9/.430 9 28-424 500-2 5/8.579 0 28-74 T5304-25 /4.87 7 28-42 500-75 3/4.93 8 28-7 T5304-3 5/.250 28-428 500-87 7/8.80 7 28-78 T5304-37 3/8.32 28-430 500-00.925 28-722 T5304-50 /2.40 5 28-432 500-2 -/8.04 5 28-724 T5304-2 5/8.500 4 28-434 500-25 -/4.5 4 GARAGE ASSORTMENT No. 020-040 Contains 0 Snap Rings, 9 sizes of 28-500, for /8 to /2 Dia. shafts. MASTER ASSORTMENT No. 020-27 Contains 40 Snap Rings, 3 sizes. Priced label in lid has actual size ring outlines for easy identification. Metal box has moulded compartments. Has a complete stock of all ring sizes and types listed above. Size: 9-3/4 W x 3-3/4 L x 2 D. SUPER-SERVICE ASSORTMENT No. 020-87 Contains 705 Snap Rings - 50 sizes. Large size, rigid metal box with high-strength plastic compartments. Size: 2 W x 8 L x D. For more details see page 0. 020-040 020-87 74 H. Paulin & Co., a division of The Hillman Group Canada ULC

SNAP RINGS CIRCLIPS 28 Packaged in uniformly priced transparent packs. *Example of Stock Number: 28-24 Illustrations Actual Size 28-200 28-400 -42-228 -424-428 -24* -444-230 -430-227 -422-23 -242-442 -432-22 -48-232 -238-440 -434-222 -224-237 -44-43 -234-438 For Other sizes of Snap Rings - see next page..800.28.4000 www.hpaulin.com 75

SNAP RINGS CIRCLIPS 28 * Example of Stock Number: 28-522 28-300 28-500 -329-505 -50-5 -50-54 -5-58 -520-522* 28-00 -330-0 -0-4 - -8-20 28-700 -332-74 -7-78 -722-724 GARAGE ASSORTMENT No. 020-04 Contains 43 External Snap Rings, sizes of 28-00 for 5/32 through 9/ Dia. shafts. No. 020-042 Contains 50 Internal Snap Rings, 0 sizes of 28-200 for /2 through 2 housing diameters. 020-04 SNAP RING PLIERS PINCES À CIRCLIP 22 Individually Carded No. 22-980 External with Tips (Black) No. 22-98 Internal with Tips (Red) No. 22-982 Snap Rings Pliers Set Economical tools for medium duty. Non-slip cushion coated grips on stamped Steel handles. Complete with four sets of tips. No. 22-97 External with Tips (Black) No. 22-977 Internal with Tips (Red) Professional quality tools have no exposed springs to pop out or snag other tools. Non-slip cushion-coated handles make pliers easy to grip and use. Complete with four sets of tips. No. 22-983 Precision Tips Set pair.045 Straight pair.035 45 pair.00 Straight pair.045 90 7 H. Paulin & Co., a division of The Hillman Group Canada ULC

WOODRUFF KEYS CLAVETTES WOODRUFF 302 Papco Woodruff Keys are made from S.A.E. 035 Carbon Steel. They are used on armature shafts of starters and generators, etc. Standard Package: 25 Keys Stock No. Size Width x Dia. Stock No. Size Width x Dia. Stock No. Size Width x Dia. Stock No. Size Width x Dia. 302-00 / x /2 302-09 /4 x 3/4 302-70 7/32 x -/8 302-23 3/8 x -3/8 302-020* 3/32 x /2 302-00* 5/32 x 7/8 302-80* /4 x -/8 302-240 /4 x -/2 302-030* /8 x /2 302-0* 3/ x 7/8 302-83 5/ x -/8 302-250 5/ x -/2 302-040* 3/32 x 5/8 302-20 7/32 x 7/8 302-90 3/ x -/4 302-257 3/8 x -/2 302-050* /8 x 5/8 302-2 /4 x 7/8 302-200 7/32 x -/4 302-270 /4 x 2-/8 302-00* 5/32 x 5/8 302-30* 3/ x 302-20 /4 x -/4 302-280 5/ x 2-/8 302-0 3/ x 5/8 302-40 7/32 x 302-24 5/ x -/4 302-290 3/8 x 2-/8 302-070 /8 x 3/4 302-50* /4 x 302-25 3/8 x -/4 302-29 3/8 x 2-3/4 302-080* 5/32 x 3/4 302-52 5/ x 302-220 /4 x -3/8 302-292 5/ x 2-3/4 302-090* 3/ x 3/4 302-0 3/ x -/8 *Denotes popular sizes Sizes not listed can be supplied. GARAGE ASSORTMENT No. 020-020 This assortment contains 00 Woodruff Keys in 2 sizes that are needed in every garage. Packed in a sturdy, plastic box. 020-020 GARAGE ASSORTMENT No. 020-02 This assortment contains 29 of the following large size Woodruff Keys. 302-90, 200, 20, 24, 25, 220, 240, 250, 257, 270, 280, 290, 29, 292. 020-02 For complete coverage of most tractors and farm machinery use the 020-020 Woodruff Key Assortment together with 020-02. MASTER ASSORTMENT No. 020-4 Contains 20 Woodruff Keys. 20 popular sizes. Metal merchandiser box with moulded plastic compartments. Actual size illustrations on lid label. Refills available in standard packages. Sizes: 302-00, 020, 030, 040, 050, 00, 070, 080, 090, 00, 0, 2, 30, 50, 52, 0, 80, 200, 20, 240. Size: 9-3/4 W x 3-3/4 L x 2 D. 020-4 SUPER-SERVICE ASSORTMENT No. 020-820 Contains 374 Woodruff Keys - 32 sizes. Large size, rigid metal box with high-strength plastic compartments. Size: 2 W x 8 L x D. For more details see page 0. 020-820.800.28.4000 www.hpaulin.com 77

UNIVERSAL O - RINGS JOINTS TORIQUES UNIVERSELS 304 Popular standard sizes used in automotive, agricultural and industrial equipment maintenance. Papco O-Rings are made of a special Nitrile Compound (Buna-N Rubber) for petroleum oils, greases, automotive gasoline, alcohols, glycols, fuel oil, propane and many other fluids. Assembly instructions: Be sure all parts are perfectly clean. Then lubricate the O-Ring. For an external groove, stretch the ring over the shaft or fold the ring into an internal groove. Avoid excessive twisting. Standard Package: contains 25 O Rings Stock No. Nominal Size Stock No. Nominal Size I.D. O.D. Section I.D. O.D. Section 304-00 /8 /4 / 304-022 -3/ -7/ /8 304-002 5/32 9/32 / 304-023 -/4 -/2 /8 304-003 3/ 5/ / 304-024 -5/ -9/ /8 304-004 7/32 /32 / 304-025 -3/8-5/8 /8 304-005 /4 3/8 / 304-02 -7/ -/ /8 304-00 5/ 7/ / 304-027 -/2-3/4 /8 304-007 3/8 /2 / 304-028 -/2-7/8 3/ 304-008 3/8 9/ 3/32 304-029 -5/8 2 3/ 304-009 7/ 5/8 3/32 304-030 -3/4 2-/8 3/ 304-00 /2 / 3/32 304-03 -7/8 2-/4 3/ 304-0 9/ 3/4 3/32 304-033 2-/8 2-/2 3/ 304-02 5/8 3/ 3/32 304-035 2-3/8 2-3/4 3/ 304-03 / 7/8 3/32 304-037 2-5/8 3 3/ 304-04 3/4 5/ 3/32 304-05 304-0 3/4 3/ -/ /8 /8 304-07 7/8 -/8 /8 304-08 5/ -3/ /8 Section I. D. 304-09 -/4 /8 304-020 -/ -5/ /8 304-02 -/8-3/8 /8 GARAGE ASSORTMENT No. 020-072 Contains 78 rings, 5 sizes from /8 to 3/4 I.D. Packed in a clear plastic box. 020-072 UNIVERSAL O RING ASSORTMENT No. 020-90 Contains 382 rings, 30 sizes from /8 to -3/4 I.D. Popular assortment of inch-series. O Rings packed in a durable A.B.S. plastic dispensing box with individual posts and compartments, and with a cross-section (thickness) molded gauge. Size chart is shown on cover. 020-90 MASTER ASSORTMENT No. 020-2 Contains 300 rings, 30 sizes, in sturdy metal box with locking lid and carrying handle. Illustrated label with actual size illustrations to make correct selection easy. Size: 9-3/4 W x 3-3/4 L x 2 D. 020-2 SUPER-SERVICE ASSORTMENT No. 020-82 Contains 390 O Rings - 30 sizes. Large size, rigid metal box with high-strength plastic compartments. Size: 2 W x 8 L x D. For more details see page 0. 020-82 AXLE SHAFT KEY STOCK BARRES DE CLEF 33 Papco Axle Key Stock in 2 lengths enables the technician to make up any size axle key on short notice and with a minimum investment. Standard package contains six 2 lengths. Stock No. Size Stock No. Size 33-74 3/ x 3/ 33-80 /2 x /2 33-7 /4 x /4 33-8 /4 x 5/ 33-77 5/ x 5/ 33-82 /4 x 3/8 33-78 3/8 x 3/8 33-83 5/ x 3/8 33-79 7/ x 7/ 33-85 3/8 x 7/ AXLE KEY STOCK ASSORTMENT No. 020-853 Contains 20 Lengths of Key Stock in all popular sizes. All 2 Long. 020-853 78 H. Paulin & Co., a division of The Hillman Group Canada ULC

ASSORTMENT No. 020-90 This handy assortment contains 50 lengths - 0 each of 3/, /4, 5/, 3/8 and /2 sq. x 2 long Axle Key Stock. Make your own keys for axle shafts, pulley shafts and many other applications where a straight key is needed. Attractive, all metal merchandiser can stand on counter or hang on wall. AXLE KEYS BARRES DE CLEF 33 020-90 Papco Axle Keys are made from special S.A.E. Key Steel, supplied in various sizes to service all cars and trucks. Standard Package: Contains 2 Axle Keys Stock No. Size Stock No. Size Stock No. Size Straight Parallel Type 33-078 3/ x 3/ x 33-5 /4 x 5/ x 3-/4 33-39 /4 x 3/8 x 3-/4 33-05 /4 x /4 x 2-7/8 33-24 5/ x 5/ x 2-3/4 33-44 5/ x 3/8 x 3-3/4 33-07 /4 x /4 x 3-/8 33-27 5/ x 5/ x 3-/8 33-47 5/ x 7/ x 3 33- /4 x 5/ x 2-/2 33-3 /4 x 3/8 x 2-5/8 33-52 3/8 x 3/8 x 3-3/4 AXLE KEY ASSORTMENT No. 020-82 This assortment contains 40 keys made up of the 2 sizes listed above. HOLE (BUTTON) PLUGS BOUCHONS DE TROU 34 020-82 Used to plug holes in instrument panel, cowl, fire wall, etc. Made of Nickel Plated Steel with spring action prongs. They snap into place and can be removed and re-inserted. Standard Package: 50 Plugs Stock No. Fits Hole Size Stock No. Fits Hole Size 34-08 3/8 34-02 3/4 34-020 7/ 34-030 34-022 /2 34-034 -/4 34-024 5/8 For Plastic button Plugs: see page 54. GARAGE ASSORTMENT No. 020-028 Contains 47 hole plugs, including each of the sizes listed. Ideal for plugging aerial, accessory or switch holes. Packed in clear plastic container. 020-028 MECHANICS WIRE BROCHE DE MÉCANICIEN 34 STOVE PIPE WIRE Papco Mechanics Wire is soft annealed for general use in garage or workshop. Used as locking wire in drilled bolts in bearings and flywheels. Packed on sturdy plastic spools - saves time - eliminates waste. Stock No. Two Pound Spools 34-28 8 Ga. (.047) 330 ft. Per spool Note: Length shown is approximate. 34-28.800.28.4000 www.hpaulin.com 79

NOTES 80 H. Paulin & Co., a division of The Hillman Group Canada ULC

AN INTRODUCTION TO... WHEEL PARTS PIÈCES DE ROUE UNE INTRODUCTION. For a full listing of Papco Wheel Parts and application guide, please refer to our current catalogue or visit our website to download a PDF version. WHEEL BOLTS AND NUTS - PASSENGER CAR - LIGHT TRUCK - IMPERIAL - METRIC - HEAVY TRUCK REAR WHEEL STUDS

WHEEL NUTS ÉCROUS DE ROUE 558 PASSENGER CAR/LIGHT TRUCK 559 REFER TO CURRENT WHEEL PARTS CATALOGUE FOR FULL LISTING AND APPLICATION GUIDE Part No. Diameter/Type A B Type St. Pkg. 558-04 7/-20R Reg. 3/4 9/ Sz 25 558-0 /2-20R Reg. 3/ 5/8 Sz 25 558-027 /2-20R Reg. 3/4 9/ Sz 25 558-044 5/8-8R Reg. -/ 2/32 Sz 0 558-045 5/8-8L Reg. -/ 2/32 Sz 0 558-047 9/-8R Reg. / Sz 0 558-050 9/-8L Reg. / Sz 0 558-055 5/8-8R Reg. 2/32 Sz 0 558-057 5/8-8R Flange -/8 -/ Hz 0 558-058 9/-8R Reg. -/ 2/32 Sz 0 558-0 9/-8R Reg. -/ 5/ Sz 0 558-02 9/-R Bulge 5/ -/4 Bz 0 558-070 7/-20 Dometop Capped 3/4 -/8 Ds 0 558-07 /2-20 Dometop Capped 3/ -5/32 Ds 0 558-092 9/-8R Wash. Nut -/ Hb 0 558-094 /2-20 Dometop Bulge 3/4-39/4 DBs 0 558-00 9/-8R Reg. 7/8 3/4 Sz 0 558-22 /2-20 Dometop Capped 3/4-5/ Ds 0 558-23 /2-20 Dometop Capped 3/ -7/4 Db 0 558-24 /2-20 Dometop Bulge 3/ -9/32 DBs 0 558-27 9/-8 Flanged Flat 7/8 Hb 0 558-40 7/-20 Acorn 3/4-3/8 Ac 0 558-43 /2-20 Dometop Capped 3/ 2-/32 Ds 0 558-44 7/-20 Acorn 3/ -3/8 Ac 0 558-4 /2-20 Acorn 3/ -3/8 Ac 0 558-48 /2-20R Acorn Bulge 3/4-3/8 ABc 0 558-0 /2-20 External Thread 3/4-3/ Ez 5 558-2 /2-20 Bulge 3/ 59/4 Bz 5 558-3 /2-20 Bulge 3/4 29/32 Bz 0 558-7 /2-20 Wirewheel 3/4 -/4 Wz 0 558-74 7/-20 Mag 3/ 3/4 Mc 0 558-7 /2-20 Mag 3/ 3/4 Mc 0 558-97 /2-20 Wirewheel 3/ -5/32 Wz 0 558-99 /2-20R Wirewheel 3/4 -/4 Wz 0 558-200 Mag Washers / c 0 558-204 9/-8 Dometop Bulge 7/8 -/2 DBc 0 558-222 /2-20 External Thread 3/.07 Sz 5 558-292 /2-20 Dometop Capped 3/ -/2 Ds 0 558-29 9/-8 Flanged Flat 5/ -/8 Hb 0 559-00 M0 x.25 Acorn 7mm 2mm Ac 0 559-04 M2 x.25 Reg. 9mm mm Sc 0 559-05 M2 x.25 Acorn 3/ -3/8 Ac 0 559-070 M2 x.5 Acorn 3/ -3/8 Ac 0 559-074 M2 x.5 Dometop Capped 9mm 3mm Ds 0 559-075 M2 x.5 Acorn 3/4-3/8 Ac 0 559-077 M2 x.5 Acorn Bulge 9mm 35mm ABc 0 559-078 M2 x.25 Acorn 9mm 25mm Ac 0 559-085 M2 x.5 Wirewheel 9mm 22mm Wb 0 559-087 M2 x.5 Dometop Capped 9mm 30mm Ds 0 Part No. Diameter/Type A B Type St. Pkg. 559-089 M2 x.5 Flattop Capped 9mm 32mm Fs 0 559-095 M2 x.25 Mag 3/ 3/4 Mc 0 559-00 M2 x.5 Mag 3/ 3/4 Mc 0 559-2 M4R x.5 2mm 34mm D 0 559-3 M2 x.25 Standard 2mm mm Sc 0 559-4 M2 x.25 Acorn 2mm 29mm Ac 0 559-7 M2 x.5 Flanged Flat 2mm 37mm DHc 0 559-25 M2 x.25 Reg. 2mm mm Sz 0 559-37 M2 x.5 Acorn Flanged 9mm 40mm AHc 0 559-38 M2 x.5 Acorn Flanged 9mm 35mm AHc 0 559-4 M2 x.5 Acorn 2mm 27mm Ac 0 559-50 M2 x.5 Reg. 9mm 4mm Sz 0 559-5 M2 x.5 External Thread 9mm 34mm EHz 0 559-54 M4 x.5 Bulge 22mm 2mm Bz 0 559-3 M2 x.5 Bulge 9mm 23mm Bz 0 559-7 M2-.5 Mag 2mm 47mm Mc 0 559-72 M2 x.5 Reg. 2mm 8mm Sz 0 559-74 M2 x.75 Flanged Flat 9mm 23mm Hb 0 559-8 M2 x.5 Wirewheel 9mm 43mm Ws 0 559-90 M2 x.5 Dometop Capped 9mm 3mm Ds 5 559-9 M2 x.5 External Thread 9mm 28mm Ez 5 559-92 M2 x.5 External Thread 9mm 3mm Ez 5 559-93 M4 x.5 External Thread 22mm 29mm Ez 5 559-94 M4 x.5 External Thread 22mm 2mm Ez 5 559-9 M4 x 2.0 Flanged Flat 2mm 23mm Hb 0 559-200 M24 x 2.0 Cover Grey 8mm 29mm Cg 5 559-20 M24 x 2.0 Cover Stainless 9mm 39mm Cs 5 559-202 M24 x 2.0 Cover Black 9mm 40mm Cb 5 559-203 M24 x 2.0 Cover Grey 9mm 44mm Cg 5 559-204 M24 x 2.0 Cover Black 9mm 45mm Cb 5 559-205 M27 x 2.0 Cover Black 22mm 40mm Cb 5 559-20 M27 x 2.0 Cover Black 23mm 40mm Cg 5 559-209 M24 x 2.0 Cover Black 8mm 29mm Cb 5 559-20 M27 x 2.0 Cover Black 2mm 39mm Cg 5 559-2 M24 x 2.0 Cover Grey 9mm 33mm Cg 5 559-22 M27 x 2.0 Cover Black 22mm 3mm Cb 5 559-25 M24 x 2.0 Cover Black 9mm 33mm Cb 5 559-220 M24 x 2.0 Cover Black 9mm 33mm Cb 5 559-257 M4-.5 Bulge 2mm 24mm Bz 0 559-259 M4-.5 Dometop Capped 2mm 43.5mm Dc 0 559-277 M4-.5 Acorn 22mm 4mm Ac 0 559-30 M2 x.5 Acorn Bulge 9mm 30mm ABc 0 559-302 M4-.5 Flanged Flat 22mm 34mm Hb 0 559-305 M2 x.5 Dometop Capped 20mm 30mm Ds 0 559-30 M4 x 2.0 Dometop Capped 20mm 50mm Ds 0 559-308 M2 x.5 Acorn 2mm 38mm Ac 0 559-309 M2 x.5 Acorn 2mm 30mm Ac 0 559-30 M2 x.25 Dometop Capped 2mm 34mm Dc 0 559-323 M4 x 2.0 Wire Wheel 2mm 3mm Ws 0 82 H. Paulin & Co., a division of The Hillman Group Canada ULC

WHEEL BOLTS BOULONS DE ROUE 50 PASSENGER CAR/LIGHT TRUCK Bare Metal REFER TO CURRENT WHEEL PARTS CATALOGUE FOR FULL LISTING AND APPLICATION GUIDE Specifications and Interchange Standard Package 0 pcs. Part No. Type Diameter x A B C D Factory No. 50-009 5 /2-20 R x 7/8 -/4 3/4 HEX - - 50-00 5 /2-20 R x -/8 -/2 3/4 HEX - - 50-0 5 /2-20 R x -7/8 2-/4 3/4 HEX - - 50-03 5 9/-8 R x -7/ -3/ 7/8 HEX - - 50-04 5 9/-8 R x -5/ -/ 7/8 HEX - - 50-05 5 9/-8 R x -5/8 2-/ 7/8 HEX - - 50-0 5 9/-8 R x -3/8-3/4 3/4 HEX - - 50-07 5 5/8-8 R x -9/ 2 7/8 HEX - - 50-08 5 /2-20 R x -/8-7/ 3/4 HEX - - 50-09 5 9/-8 R x -/4-9/ 3/4 HEX - - 50-032 /2-20 R x -3/8.30 -.555 24054 50-034 /2-20 R x -/2.8 -.32 48230 50-039 2 /2-20 R x -5/8.20.40.500 2952858 50-090 2 /2-20 R x -5/.25.270.438 539499 50-09 7/-20 R x -7/.50 -.530 2534754 50-02 2 /2-20 R x -/.52.200.30 322987 50-03 2 /2-20 R x -/2.5.200.590 253744 50-05 2 /2-20 R x -3/.50.300.40 39980 50-0 4 /2-20 R x 2.23.25.000 37375 50-4 2 7/-20 R x -/2.45.40.285 9590259/7 50-38 /2-20 R x -5/8.535 -.325 23537 50-48 2 /2-20 R x -3/.20.220.780 358093 50-55 /2-20 R x -5/8.30 -.20 39258 50-3 2 /2-20 R x -7/.545.270.438 D3AZ-07B 50-7 2 /2-20 R x -5/.587.220.25 DAZ-07C 50-72 2 /2-20 R x -7/8.50.300.50 DDZ-07A 50-73 2 /2-20 R x -3/4.25.280.438 DAZ-07A 50-75 2 /2-20 R x -3/4.5.32.575 2959852 50-80 4 5/8-8 R x 2-/.55.32.90 34954 50-8 2 5/8-8 R x 2-3/32.52.255.83 3457 50-82 4 5/8-8 R x 2-9/.55.400.875 2553 50-83 4 5/8-8 R x 2-5/.50.420.000 337878 50-8 2 /2-20 R x -7/8.2.250.00 EOTZ-07C 50-87 /2-20 R x -5/8.23 -.50 53579 50-29 2 /2-20 R x 2-/8.23.200.00 D3TZ-07A/E 50-277 4 /2-20 R x 2-/4.25.225.95-50-280 4 9/-8 R x 2-/8.25.225.935-50-28 4 /2-20 R x 2-3/.723.300.250 4934 50-287 2 /2-20 R x -29/32.7.375.725 032505 50-289 2 /2-20 R x -29/32.583.325.420 033382 50-298 2 /2-20 R x 2.547.25.87 ETZ-07B 50-303 2 9/-8 R x 3-9/32.77.435.725 E5TZ-07B 50-305 2 9/-8 R x 2-/8.40.275.52 ETZ-07A 50-345 2 /2-20 R x -7/8.570.225.25-50-348 4 /2-20 R x 2-/8.58 -.82 4383430 50-355 4 9/-8 R x 2-3/.30.80.25 D0TZ-07A 50-35 4 9/-8 L x 2-3/.30.225.25 D0TZ-9A 50-358 2 /2-20 R x 2.2.340.5 E9ZZ-07A 50-33 4 /2-20 R x 2-/32.5.45.000 4030779 50-34 2 /2-20 R x -5/32.8.20.484 83503053 50-3 2 /2-20 R x -3/4.50.370.740 229808-9 50-37 3 /2-20 R x 2.585.90.750 FVZY-07A 50-38 2 /2-20 R x -3/32.5.32.53 F0VY-07A 50-37 2 9/-8 R x -7/8.20.32.700 399795 50-38 2 7/-20 R x -5/.555.280.400 9590258 50-389 2 9/-8 R x 2-5/. -.82-50-390 2 7/-20 R x -/2.555.300.50 997855 50-439 2 9/-8 R x 2-7/.58.270.438-50-444 3 /2-20 R x 2-/.28.88.437-50-458 4 9/-8 R x 2-3/32.30.325.950 C9TZ-07C 50-459 2 9/-8 R x 2-/8.35.280.500 334388 50-40 2 9/-8 R x 3.30.875.00 3988538 50-4 2 9/-8 R x 3-9/.30.875.75 35585 50-48 4 9/-8 R x 2-/8.50.300.750 475988 50-49 4 9/-8 R x 2-/2.50.40.925 400223 50-470 4 /2-20 R x -3/4.25.200.740 2955940 50-472 2 9/-8 R x 2.23.200.585 C8TZ-70E 50-473 4 9/-8 R x 2-5/8.22.225.000 E0TZ-07B 50-474 2 9/-8 R x 2-/2.20.240.500 E4TZ-07A 50-479 3 /2-20 R x 2-3/32.0.32.484-50-529 2 9/-8 R x 2-3/8.45.300.425 2C2Z07A 50-04 4 7/-20 R x -3/4.575.280.80 399584.800.28.4000 www.hpaulin.com 83

METRIC WHEEL BOLTS BOULONS DE ROUE MÉTRIQUE 5 PASSENGER CAR/LIGHT TRUCK Bare Metal REFER TO CURRENT WHEEL PARTS CATALOGUE FOR FULL LISTING AND APPLICATION GUIDE Specifications and Interchange Standard Package 0 pcs. Part No. Type Diameter x A B C D Factory No. 5-00 2 M2 x.25r x 39mm 2.9mm 7mm 5.4mm 40222-A0800 5-02 2 M2 x.25r x 32mm 2.9mm 7mm 0.mm 40222-220 5-0 M2 x.5r x 38.5mm 4.7mm - 0mm 500352/073 5-08 2 M2 x.5r x 38.5mm 4.3mm 7mm 0mm 5204272 5-09 3 M2 x.5r x 40mm 4.8mm 7mm 3.5mm - 5-0 2 M2 x.5r x 43mm 3mm mm 9.mm 9590475/7 5-2 2 M2 x.5r x 40mm 2.5mm 8mm 0mm 9402427 5-4 M2 x.5r x 38mm 4.35mm - mm 9402572 5-5 2 M2 x.5r x 35mm 2.7mm 5mm 9mm - 5-8 5 M2 x.5r x 34mm 43mm 9mm Hex - 323838, D8RZ-07B 5-22 M2 x.5r x 3mm 4.3mm - 9mm 90942-02035 5-2 2 M2 x.5r x 4mm 4.2mm 5mm 8.5mm 90942-02037 5-30 M2 x.5r x 27mm 40mm 7mm Hex - 32-0-39 5-32 M2 x.5r x 30mm 45mm 7mm Hex - 32-0-39C 5-33 M4 x.5r x 35mm 50mm 7mm Hex - 43/443-0-39A 5-39 2 M2 x.5r x 37mm 4mm 4mm mm - 5-40 M2 x.5r x 37mm 4.4mm -.4mm MB05703 5-52 M2 x.5r x 30mm 48mm 9mm Hex - 90304-92-920-92 5-54 2 M2 x.5r x 3mm 2mm.3mm 2mm 903-SAO-003 5-55 M2 x.25r x 33mm 2mm - 0mm 903-34-003 5- M2 x.5r x 32mm 3mm - 9mm D5RY-07C 5-7 M2 x.5r x 28mm 44mm 2mm Hex - - 5-8 2 M2 x.5r x 38mm 3mm 7mm 2mm E07Z-07A/C 5-9 2 M2 x.5r x 43mm 2.85mm.5mm 3.8mm F0CZ-07A 5-74 M2 x.25r x 34mm 2.24mm - 0mm 90572 5-75 2 M2 x.25r x 38mm 2.24mm 9.mm 4mm 90573 5-247 2 M2 x.5r x 4mm 3.4mm.5mm.2mm F0DZ-07A 5-248 2 M2 x.5r x 43mm 4.5mm 5.5mm mm E43Z-07A 5-249 2 M2 x.5r x 4mm 5.37mm 5.7mm 5mm E9SZ-07C 5-250 3 M2 x.5r x 47mm 3.34mm.5mm 4.3mm E0SZ-07A 5-25 2 M2 x.5r x 5mm 3.5mm 5mm 4.5mm E3FZ-07A 5-255 2 M2 x.5r x 52mm 2.9mm 3mm 2.5mm FB05-2-3A 5-24 4 M2 x.5r x 52mm 4.33mm 5.5mm 25.2mm 90942-02053/044 5-309 3 M2 x.5r x 42.7mm 3.08mm 7mm 9.5mm 859-33-02 5-32 2 M2 x.5r x 44mm 4.7mm 7mm 2mm MB584750 5-322 M2 x.25r x 30mm 4.27mm -.0mm 5-3 3 M2 x.5r x 4mm.50mm 5mm 3.3mm 5028, 5052 5-37 M2 x.5r x 3mm 52mm 7mm Hex - - 5-39 2 M2 x.5r x 4mm 5.00mm.mm 8.00mm 5023 5-370 2 M2 x.5r x 44mm 5.80mm mm 5.2mm 502247 5-37 2 M2 x.5r x 43mm 7.00mm mm 5.00mm 502330 5-37 3 M2 x.5r x 49mm 3.90mm 7.7mm 5.00mm F3DZ-07A 5-378 2 M2 x.25r x 42mm 4.35mm 7mm 3.5mm - 5-380 2 M0 x.25r x 29mm 0mm mm 9mm 90555 5-390 M2 x.75r x 5mm 4.73mm - 8mm - 5-393 2 M2 x.75r x 55mm 4.73mm mm 8mm - 5-40 2 M2 x.25r x 42mm 4.43mm mm 4.5mm - 5-40 2 M4 x.5r x 49mm 5.7mm 8mm 4.5mm 2338057 5-4 2 M4 x.5r x 7mm 5.7mm 23mm 27mm 554535 5-43 2 M4 x.5r x 43mm 5.7mm 8.5mm mm 2338040 5-44 2 M4 x.5r x 43mm 5.7mm 8mm.5mm 5589423 5-45 2 M4 x.5r x 4mm 5.8mm 7mm 4mm 5589455 5-4 2 M2 x.5r x 52mm 4.8mm 8mm 5.3mm - 5-47 4 M4 x.5r x 54mm 5.7mm 7mm 9mm 558948 5-48 2 M4 x.5r x 9mm 5.7mm 22mm 33mm 5589493 5-424 2 M4 x 2.0R x 73mm 5.78mm 8mm 4.25mm - 5-428 2 M4 x.5r x 5mm 5.7mm 7mm 7mm - 5-43 2 M4 x.5r x 80mm 5.7mm 9mm 35mm - 5-434 2 M4 x.5r x 58mm mm mm 8mm - 5-43 2 M4 x.5r x 04mm mm 30mm 59mm - 5-442 2 M4 x 2.0R x 58mm 5.5mm 4.mm 2mm - 5-445 M2 x.5r x 49mm 4.48mm - 7mm - 5-47 M4 x.5r x 3mm 50.5mm 7mm Hex - 4D0039A 5-492 2 M2 x.5r x 48.3mm 2.84mm 5.5mm 7mm 227059 5-502 3 M4 x.5r x 50mm.02mm - 8mm - 5-5 M4 x.5r x 3mm 49mm 7mm Hex - 0009904907 5-522 M4 x.5r x 4mm 54.5mm 7mm Hex - 33758730 5-527 M4 x.5r x 45.5mm.5mm - 9mm 903-SHJ-A0 5-532 M4 x.25r x 3mm 49mm 7mm Hex - 3377489 84 H. Paulin & Co., a division of The Hillman Group Canada ULC

WHEEL NUTS ÉCROUS DE ROUE 558 HEAVY TRUCK Plated 02-52 02-524 558-028 558-029 558-034 558-035 558-032 558-033 Standard Package 0 pcs. Part No. Type Size and Thread Factory No. Budd No. 02-52 Hex Conelok B 3/4- Right Hand; -/8 Hex. Back Nut (H.T.) 02-524 Hex Conelok B 5/8-8 Right Hand; -5/ Hex. Back Nut (H.T.) 558-028 Hex Bevelled 3/4- Right Hand; -/2 Hex. BB20, 3729738 37888 558-029 Hex Bevelled 3/4- Left Hand; -/2 Hex. BB2, 3729737 37889 558-032 In. & Out. Thd. 3/4- Right Hand -/8- Right Hand BB32, 27972 0708 558-033 Same as above 3/4- Left Hand -/8- Left Hand BB33, 27973 0709 558-034 Hex Bevelled -/8- Right Hand; -/2 Hex. BB34, 27970 3789-E 558-035 Hex Bevelled -/8- Left Hand; -/2 Hex. BB35, 2797 37892-E REAR WHEEL STUDS GOUJONS DE ROUE ARRIÈRE Plated 55 Standard and Oversize Stock No. Description Thread x Thread x Length Thread Length Application 55-70 7/-20 x 7/-4 x 2 7/8 UNF 3/4 UNC 5987, Dodge 55-80 7/-20 x 7/-4 x 2 /2 7/8 UNF 3/4 UNC, Dodge 55-8 7/-20 x 9/-2 x 2 /2 7/8 UNF 7/8 UNC No. 2023789, Oversize GMC Truck 55-9 7/-20 x /2-3 x 3/4 UNF /2 UNC No. 352728-X Oversize 55-200 7/-20 x 7/-4 x 2 /4 7/8 UNF 7/8 UNC No. 35377 Chevy Truck 940-53 55-20 7/-20 x /2-3 x 2 /4 7/8 UNF 7/8 UNC No. 35377-X Oversize 55-20 5/8- x 5/8- x 2 3/4 /2 UNC UNC Universal Truck Stud, Dayton Wheels 55-240 /2-20 x /2-3 x 2 /2 UNF 3/4 UNC 5554H International 55-250 /2-20 x 9/-2 x 2 3/8 7/8 UNF 7/8 UNC No. 0375VA, Oversize International 55-270 /2-20 x /2-3 x 2 7/8 7/8 UNF 3/4 UNC No. 584703 GM Mack 8AX405 Models B-0, B-, M-35 55-337 3/4-0 x 3/4-0 x 2 3/ /2 UNC UNC Universal Truck Stud. Dayton Wheels 55-487 7/-20 x / x 7/ Hex Nut No. 35025, use with both 55-90 & 55-9 Studs 55-488 5/8- x / x 39/4 Hex Nut Use with 55-20 Stud 55-489 3/4-0 x /4 x 47/4 Hex Nut Use with 55-337 Stud 55-497 7/ Dowell Washer (Sleeve).740 O.D. No. BB-42B, use with both 55-90 & 55-9 Studs WHEEL BOLTS AND NUTS BOULOUS ET GOUJONS DE ROUE HEAVY TRUCK 55 Stock No. Type Thread Diameter TYPE 4 B A Standard Package 0 Pcs. DIMENSIONS CROSS REFERENCE A B C BUDD FORD G.M. 55-044 4 3/4-3-27/32 2-5/ -5/32 3990 TUAA-8 2442 55-045 399-L TUAA-9-L 24427-L 55-04 4 3/4-4-7/32 2-/ -7/ 723 202280 55-047 724-L 2022807 55-0 4 3/4-4-7/32-5/ 27 55-08 4 3/4-4-/32 2-/2-9/32 9004 55-09 9005-L C.800.28.4000 www.hpaulin.com 85

WHEEL BOLT AND NUT ASSORTMENTS ASSORTIMENTS DE BOULONS ET ÉCROUS DE ROUE MERCHANDISER No. 022-055 Papco Mega-Paks are uniformly priced packages of the most popular inch & metric Wheel Bolts and Nuts. Each Mega-Pak features an illustrated, colour coded label, suggested selling price and a double strength drawer box. Papco Mega-Paks are available individually or in a factory prepared Merchandiser No. 022-055 containing 35 sizes of the fastest selling sizes of GM, Ford, Chrysler and Import Wheel Parts. Sturdy, Heavy Gauge, Reinforced Steel Cabinet Use on Works Bench or Hang on Wall Colourful-Durable-Efficient Includes handy Bolt measuring Gauge 022-055 8-/2 wide 4-3/4 high Part No. Cat. No. Pcs. Part No. Cat. No. Pcs. Part No. Cat. No. Pcs. Part No. Cat. No. Pcs. 025-72 (50-72) 2 025-874 (559-074) 025-95 (5-5) 2 025-93 (559-3) 3 025-75 (559-50) 4 025-875 (559-075) 4 025-9 (5-8) 2 025-94 (559-04) 3 025-738 (50-38) 3 025-89 (559-9) 2 025-925 (559-25) 4 025-97 (50-37) 2 025-748 (558-48) 3 025-892 (559-92) 2 025-92 (5-2) 2 025-98 (50-38) 2 025-750 (5-250) 2 025-900 (558-00) 3 025-935 (50-355) 2 025-99 (5-9) 2 025-755 (50-55) 4 025-903 (50-03) 3 025-938 (559-38) 025-97 (5-37) 2 025-772 (559-72) 3 025-908 (5-08) 3 025-94 (5-4) 025-978 (5-378) 2 025-773 (50-73) 2 025-909 (5-09) 3 025-954 (5-54) 3 025-99 (5-39) 2 025-8 (558-0) 5 025-90 (5-0) 3 025-92 (5-2) 2 UTILITY ASSORTMENT No. 020-3 This Utility Assortment contains 8 sizes of the fastest moving Papco Wheel Nuts. CONTENTS OF ASSORTMENT No. 020-3 Part No. Pcs Part No. Pcs Part No. Pcs 558-04 5 558-044 5 559-25 5 558-0 5 558-047 5 559-50 5 558-027 5 558-00 5 MASTER ASSORTMENT No. 020-58 A Master Assortment containing 20 sizes of the most popular Wheel Bolts and Nuts for GM, Ford, Chrysler, AMC and Imports. CONTENTS OF ASSORTMENT No. 020-58 Part No. Pcs Part No. Pcs Part No. Pcs 50-03 5 50-73 5 5-248 5 50-4 5 50-38 5 5-25 5 50-38 5 5-08 5 558-04 0 50-48 5 5-09 5 558-0 0 50-55 5 5-0 0 558-027 0 50-7 5 5-22 5 559-50 0 50-72 5 5-54 5 SUPER-SERVICE ASSORTMENT No. 020-802 A Super-Service Assortment containing 32 of the most popular Wheel Bolts and Nuts for GM, Ford, Chrysler, AMC and Imports. CONTENTS OF ASSORTMENT No. 020-802 Part No. Pcs Part No. Pcs Part No. Pcs 50-02 5 50-8 5 5-7 5 50-03 5 50-38 5 5-248 5 50-05 5 5-00 5 5-25 5 50-0 5 5-02 5 5-380 5 50-4 5 5-0 5 558-04 0 50-38 5 5-08 5 558-0 0 50-48 5 5-09 5 558-027 0 50-55 5 5-0 5 559-25 0 50-7 5 5-22 5 559-50 0 50-72 5 5-54 5 50-73 5 5-5 020-3 020-58 020-802 8 H. Paulin & Co., a division of The Hillman Group Canada ULC

ELECTRICAL ÉLECTRICITÉ WIRING TERMINALS INSULATING P.V.C. TAPE CRIMPING TOOL CABLE TIES WIRE GROMMETS FUSE ACCESSORIES SHRINK TUBING CIRCUIT TESTERS TEST CLIPS CHARGING CLIPS TEST LEADS BATTERY TERMINALS BATTERY BOOSTER CLAMPS BATTERY BOOSTER AND TERMINAL CLEANERS BATTERY HOLD DOWN BOLTS UNIVERSAL BATTERY HOLD DOWNS BATTERY TERMINAL BOLTS AND NUTS

WIRING TERMINALS COSSE SANS SOUDRE 59 INSULATED SOLDERLESS TYPE Papco Wiring Terminals are constructed from pure electrolytic copper, annealed and electro-tin plated. The one-piece construction provides a terminal of maximum strength and electrical conductivity. The electro-tin plating affords maximum protection against corrosion. Funnel barrel entry assures easy wire insertion and a positive, solid crimp. Insulation is colour coded for the appropriate wire gauge: Red 22-8, Blue 8-4 and Yellow 2-0. 59-45 Stock No. Type 22-8 WIRE GAUGE Ring Stud Size No. 4 - No. Pcs/ Box 50 59-45 Stock No. Type 8-4 WIRE GAUGE Hook Stud Size No. 8 - No. 0 Pcs/ Box 50 59-525 Stock No. Type 8-4 WIRE GAUGE 8-478 Recep. Stud Size Pcs/ Box - 25 59-420 Ring No. 8 - No. 0 50 59-4 Spade No. 4 - No. 50 2-0 WIRE GAUGE 59-42 Ring No. 2 - No. 4 50 59-47 Spade No. 8 - No. 0 50 59-5 Ring No. 8 - No. 0 50 59-422 Multi Fit No. - No. 0 50 59-48 "Snap" Spade No. 8 50 59-52 Ring No. 2 - No. 4 50 59-424 Hook No. 8 - No. 0 50 59-49 "Snap" Spade No. 0 50 59-53 Ring 5/ - 3/8 50 59-425 59-42 Spade Spade No. 4 - No. No. 8 - No. 0 50 50 59-470 Three Way - 25 59-53 59-5 Multi Fit Spade No. - No. 0 No. 8 - No. 0 25 50 59-432 Butt - 50 59-473 Butt - 50 59-522 Butt - 50 59-435 Insul. Quick Disc. 59-43 Insul. Quick Disc. 59-40 59-4 8-4 WIRE GAUGE Ring Ring /4 F 25 /4 M 25 No. 4 - No. No. 8 - No. 0 50 50 59-474 59-475 Quick Disc. Quick Disc. /4 F 50 /4 M 50 59-47 Insul. Quick Disc. /4 F 25 59-477 Insul. Quick /4 M 25 Disc. 59-478 Bullet - 50 59-523 Insul. Quick Disc. 59-524 Insul. Quick Disc. 59-529 Closed end /4 F 25 /4 M 25-50 T-Tap Connectors Use in trunk to trailer hook-ups. T-splice stop lights and turn signals without stripping wires. Snap plug allows easy disconnect. 59-42 59-44 Ring Multi Fit No. 2 - /4 No. - No. 0 50 50 59-500 SPEE-DEE Connectors Make safe, fast, dependable connections. No wire stripping - no cutting - works on 4-8 wire gauge. Use standard pliers. The snap cover gives a completely insulated connection. Polypropylene case maintains live action. 25 Pieces 59-530 25 Pieces For other assortments of Papco Wiring Terminals and Crimping Tools see next page. 88 H. Paulin & Co., a division of The Hillman Group Canada ULC

INSULATING PVC COLD WEATHER TAPE RUBAN BASSE TEMPÉRATURE-FROIDE Temperature rating: -8ºC to 90ºC Standard Package: 0 Rolls Stock No. Size Length per Roll Colour 2-25 8mil x 3/4 feet Black INSULATING P.V.C. TAPE RUBAN ISOLANTE EN P.V.C. Temperature rating: -7ºC to 80ºC Standard Package: 0 Rolls Stock No. Size Length per Roll Colour 2-2 7mil x 3/4 feet Black 2-27 7mil x 3/4 feet Blue 2-28 7mil x 3/4 feet Red 2-29 7mil x 3/4 feet Yellow 2-30 7mil x 3/4 feet Green 2-3 7mil x 3/4 feet White Used for protecting electrical parts and wires. These tapes provide required insulation capacity, high voltage and many more. CSA approved High Quality Colour: Black Flame retardant WIRING TERMINAL ASSORTMENTS ASSORTIMENTS DE BORNES ÉLECTRIQUES GARAGE ASSORTMENT No. 020-07 Contains 45 Ring, Spade, Multi-Fit and Butt Terminals. 5 sizes packed in a rigid, transparent plastic box. 020-07 020-50 MASTER ASSORTMENT No. 020-50 This assortment contains 32 items for a total of 325 pieces of the most popular Ring, Spade, Hook, Butt and Quick Disconnect Terminals. Metal box with moulded plastic compartments features grease resistant lid label with actual size illustrations a handy wire size and stud size chart. Size: 9-3/4 W x 3-3/4 L x 2 D. SUPER SERVICE ASSORTMENT No. 020-82 Contains 500 Wiring Terminals - complete coverage of all sizes listed. Large size, rigid metal box with high-strength plastic compartments. Size: 2 W x 8 L x D. For more details see page 0. 020-82.800.28.4000 www.hpaulin.com 89

CRIMPING TOOL OUTIL COSSE 59 No. 59-300 Five in one Papco Crimping Tool is capable of performing five operations: Crimper (both insulated and non-insulated), Wire Cutter, Wire Stripper and Bolt Cutter. Individually carded. Order by card number. CABLE TIES SANGLES POUR CABLE 59-300 Standard Type Mounting Type Self-locking nylon ties for quick, simple bundling and mounting. Material is High-Strength Black Nylon / for increased resistance to outdoor exposure and ultra-violet light. Use to secure wiring harness, cables, hose, wires and pipes, and to prevent damage from moving parts or hot engine components. Packed in handy, sealed poly-bags in quantities shown. Stock No. Bundle Dia. Length Tensile Strength Std. Pkg. Standard Ties 59-70 3/4 4 8 lbs. 00 59-704 -/4 5-/2 40 lbs. 00 59-70 2 8 50 lbs. 00 59-708 4 4-/2 50 lbs. 0 59-70 4 4-/2 20 lbs. 0 Mounting Ties 59-74 2 8 50 lbs. 25 59-70 WIRE GROMMETS BAGUES POUR FIL OIL RESISTANT BLACK VINYL Prevents insulation damage, shorts and leaks. Standard Package: 0 Pieces Stock No. Size Stock No. Size 59-230 3/8 O.D. x /4 I.D. 59-23 /2 O.D. x 3/8 I.D. 59-23 7/ O.D. x 5/ I.D. 59-237 5/8 O.D. x 3/8 I.D. 59-232 /4 O.D. x /8 I.D. 59-238 5/8 O.D. x /2 I.D. 59-233 5/ O.D. x 3/ I.D. 59-240 7/8 O.D. x 5/8 I.D. 59-234 3/8 O.D. x /4 I.D. 59-24 O.D. x / I.D. FUSE ACCESSORIES ACCESORIES POUR FUSIBLE Standard Package: 5 Pieces Stock No. Description 59-029 In-line Fuse Holder with 0 AMP Fuse, 2 Ga. wire. 59-030 Blade (ATO) Type Fuse Holder for 3 to 20 AMP Fuses. 59-029 59-030 90 H. Paulin & Co., a division of The Hillman Group Canada ULC

SHRINK TUBING TUBE RETRAIT Insulates, groups and weather proofs wiring connections. Charcoal grey tubing can be cut easily to suit length required. Shrink with warm air blower. Stock No. Size Standard Package Standard Ties 59-200 3/ I.D. x 25 59-20 /4 I.D. x 25 59-203 3/8 I.D. x 25 59-200 CIRCUIT TESTERS VÉRIFICATEUR DE CIRCUIT Tests for voltage presence in circuits. Locates improper connections, shorts and broken wires. -2 VOLTS CIRCUIT TESTER No. 570-00 The most popular and largest selling tester. Quickly and accurately tests all to 2V systems. Includes a spare bulb and extra long 48 lead. Individually carded. HI-LO VOLTAGE CIRCUIT TESTER No. 570-0 All the proven features of the popular Part No. 570-00 Circuit Tester - plus the ability to test Hi-Voltage circuits such as Spark Plugs. Checks for broken insulators, excessive gap, poor wire, fouled or worn spark plugs. 570-00 570-0 LED DISPLAY AUTO CIRCUIT TEST No. 570-03 Professional quality Hi-Lo Voltage Circuit Tester accurately and quickly tests live wires, batteries and ignition systems including Spark Plugs. LED Display on side of tester indicates degree of battery charge. Individually carded., 2, 24 VOLTS CIRCUIT TESTER No. 570-05 Professional quality tester features unbreakable plastic handle, heavy duty ground clip, 0 long rubber coated, heavy duty lead wire. Tests all, 2 and 24 Volts systems with power on. Individually carded. 570-03 570-05.800.28.4000 www.hpaulin.com 9

TEST CLIPS PINCES DE VÉRIFIER 570 ALLIGATOR TYPE A handy clip used in test work on ignition, radio and electrical applications. Strong, slim jaws with nesting teeth for good contact. Bright plated steel - 2 long - 3/8 jaw spread. Order by stock number 570-29. Standard package 0 clips. ASSORTMENT DISPLAY No. 020-879 Contains 3 Alligator Type Test Clips No. 570-29. Attractive three colour point of purchase display card. See page. CHARGING CLIPS PINCES DE CHARGE Standard Package: 0 Clips Stock No. Size Capacity Jaw Spread Length Bull-dog teeth for positive contact. 570-30 Small 0 AMP /2 2 Heavily plated to resist corrosion. 570-3 Medium 20 AMP 2-7/8 Feed-thru neck prevents twisting. Oversize screw head for easier wiring. 570-34 Large 50 AMP -/4 4 570-29 570-39 CARD No. 570-39 Convenient skinpacked card contains four Alligator Type Test Clips. Order by card number. 570-39 570-3 Convenient skin-packed card contains four Charging Clips. Three sizes available. Order by card number. Card No. Capacity 570-40 0 AMP 570-4 30 AMP 570-44 50 AMP 570-40 TEST LEADS FILS DE VÉRIFIER CARD No. 570-0 Electrical test leads for auto, marine, hobby, shop, household and many other applications. Quickly shows hidden trouble in electrical systems. Consists of one black and one red extra long 48 leads complete with insulated, plated steel alligator clips fitted to both ends. Individually packaged. 570-0 BATTERY TERMINAL AND GEAR PULLER ARRACHE-COSSES/PIGNON CARD No. 570-20 Use this popular tool to raise the Terminal off the post. A few turns applies even pressure without risk of damage. Individually carded. 570-20 92 H. Paulin & Co., a division of The Hillman Group Canada ULC

BATTERY TERMINALS COSSES DE BATTERIE 570 All Papco Battery Terminals are made of Lead Alloy or Brass. Standard Package: 25 Terminals Stock No. 570-34 Stock No. 570-3 Stock No. 570-37 Stock No. 570-395 UNIVERSAL SIDE BRASS MARINE TERMINALS UNIVERSAL STRAIGHT UNIVERSAL TERMINAL MOUNT TERMINAL Polarity specific - meets U.S. TYPE TERMINAL Coast Guard regulations Brass construction, fasteners included Standard Package: 0 positive; 0 negative No. 00 down to No. gauge No. 00 down to No. gauge No. 0 and No. 00 down to No. gauge UNIVERSAL BATTERY TERMINAL COSSE DE BATTERIE UNIVERSEL 020-870 SOLDERLESS TYPE ASSORTMENT DISPLAY CARD No. 020-870 No. 570-39 Contains 0 Universal Universal Solderless Battery Solderless Battery Terminals Terminal holds No. 00 down to No. 570-395 (see above). No. gauge. Top plate reverses - holds flat strap or smaller Attractive three colour display card. wire. Fits positive or negative posts. UNIVERSAL MARINE BATTERY TERMINAL COSSE DE BATTERIE TYPE MARIN UNIVERSEL 020-88 SOLDERLESS TYPE ASSORTMENT DISPLAY CARD No. 020-88 No. 570-397 Contains 0 Universal Marine Universal Marine Type Battery Type Battery Terminals Terminal holds No. 00 down to No. 570-3 (see above). No. gauge. Forged Brass for Attractive three colour high conductivity. Heavily plated. display card. Fits positive or negative posts. 5 positive posts 5 negative posts positive post negative post 570-39 570-397 UNIVERSAL SIDE TERMINAL COSSE DE BATTERIE LATERAL UNIVERSEL SOLDERLESS TYPE ASSORTMENT DISPLAY CARD No. 020-89 No. 570-398 Contains 8 Universal Side Universal Side Terminals fits Terminals No. 570-34 both positive and negative (see above). posts. Convenient skin-packed Attractive three colour point card contains two terminals. of purchase display card. Order by card number. 020-89 570-398.800.28.4000 www.hpaulin.com 93

BATTERY TERMINAL PROTECTORS PROTECTEURS DE COSSE DE BATTERIE 570 Special polyester pad impregnated with a chemical corrosion inhibitor that prevents power robbing corrosion build-up. Extends life of terminals and hold downs. Easily installed. 25 Red and 25 Black per jar. Card No. Application 570-427 Post and side mount in one. Side Terminal Post Terminal 570-427 BATTERY BOOSTER CLAMPS COLLIERS DE CHARGE-BATTERIE 020-889 500 AMP ASSORTMENT DISPLAY CARD No. 020-889 No. 570-245 Five pair 500 AMP 500 AMP Professional Duty clamp Professional Duty clamps made of heavy gauge steel, bright with vinyl insulated, non-slip nickel plated complete with cable handles on attractive three lug. Colour coded vinyl, non-slip colour point of purchase insulated handles. Convenient display card. skin-packed card contains two clamps - one red, one black. Order by card number. 570-245 BATTERY TESTER AND BOOSTER ADAPTORS VÉRIFFICATEUR ET COLLIERS DE CHARGE-BATTERIE BATTERY TESTER No. 570-250 Tests all,2 and 24 Volt Batteries. Accurately and quickly indicates the degree of charge in each cell. Individually blister-packed. Order by part number 570-250. BATTERY BOOSTER ADAPTORS No. 570-200 Made of copper plated heavy duty steel for maximum conductivity. For use on all side terminal batteries. Installs between the terminal and the battery. Makes an ideal charging connection for hard-to-reach and hard-togrip side mount terminals. 570-250 For Side Terminals 570-200 UNIVERSAL BATTERY AND CHARGING POST PILE UNIVERSELLE POSTE DE CHARGEMENT No. 570-344 Use two ways: () As Charging Post - just screw into side mount battery and attach booster clamps. (2) As Battery Post - screw into side mount battery and it becomes a post - attach conventional terminals. Convenient skin-packed card contains 2 complete charging post. For Side Mount Batteries 570-344 500 AMP 94 H. Paulin & Co., a division of The Hillman Group Canada ULC

BATTERY POST AND TERMINAL CLEANERS NETTOIE-BORNES / COSSES 570 No. 570-270 This tool quickly removes corrosion and scale from the terminal. Wire brush in base cleans the battery post. Helps maintain metal-to-metal contact. Individually Carded. Order by card number. No. 570-275 Professional type, heavy duty one piece tool. Quickly and easily removes corrosion and dirt build-up that causes grounding on battery posts and terminals. Specially designed and clearly marked for cleaning either positive or negative posts. Tapered reamer for cleaning all post type battery terminals. 570-270 570-275 BATTERY HOLD DOWN BOLTS BOULONS DE FIXE-BATTERIE All Bolts are plated and include Wing Nut and Washer. Convenient skin-packed cards contain two complete Bolts. Type Type 2 Type 3 Type 4 Card No. Type Size Description Thread Application Factory No. 570-0 2 /4-20 x 0-/2 Round Hook 4 Universal 570-2 /4-20 x 0 Round Hook 4 Universal 570-2 5/-8 x 2 Carriage Head 5-/2 Universal 570-3 2 5/-8 x 2 Round Hook 5 Universal 570-4 3 /4-20 x 0-/4 Right Angle 4 Universal 570-5 2 5/-8 x 7-/2 Round Hook 4 G.M. Products 38899 570-4 3/8- x Flat End with 2 mount screws 2-/4 Chrysler Products (Outer bolt) MASTER ASSORTMENT No. 020-28 Garages - Service Stations - can replace any Battery Hold Down Bolt with the complete coverage of this assortment. Contains 34 Bolts, 30 pieces. 7 sizes complete with nuts and washers. All metal box - hinged lid. Handy carrying handle with safety snap lock. Illustrated label shows every part. 020-28.800.28.4000 www.hpaulin.com 95

UNIVERSAL BATTERY HOLD DOWNS FIXE - BATTERIE UNIVERSEL 570 These four styles fit most popular batteries. Made of vinyl coated steel or nylon, highly resistant to rust and corrosion. Individually skin-packed* on an attractive three colour display card. Contains all necessary hardware. UNIVERSAL CROSS BAR TYPE No. 570-508 Universal cross bar type fits battery groups 22F, 24, 27, 0. UNIVERSAL END TYPE No. 570-509 Universal end type for base mount battery groups 22NF, 27F and 29NF. UNIVERSAL SIDE TYPE No. 570-50 Universal side type for side mount battery groups 22F and 24C also end mount group 22F. UNIVERSAL BATTERY HOLD DOWN CLAMPS No. 570-52* Contains two Universal Battery Hold Down clamps. Holds all types of batteries securely. Strong, flexible nylon will not break or corrode. 570-508 570-509 570-50 570-52* *2 per card. BATTERY TERMINAL BOLTS AND NUTS BOULONS ET ÉCROUS POUR COSSE DE BATTERIE Standard Package: 00 Pieces SHOULDER BOLT and HEX NUT No. 570-40 5/ x -/4 NUT No. 570-4 5/-8 SHOULDER BOLT and NUT No. 570-42 5/ x -/4 SHOULDER NUT No. 570-43 5/-8 SIDE TERMINAL BOLT No. 570-45 3/8 x 7/ 570-40 570-4 570-42 570-43 570-45 9 H. Paulin & Co., a division of The Hillman Group Canada ULC

MISCELLANEOUS AUTO PIÈCES AUTOMOBILES VARIÉES STABILIZERS ADJUSTABLE COIL SPRING EXPANDER SPRING CENTRE BOLTS & NUTS UNIVERSAL TAILPIPE BRACKETS CYLINDER HEAD BOLT KITS PIPE PLUGS WING NUT & HOOD PROP CLIP THROTTLE ROD CLIPS & RETAINERS THROTTLE BALL JOINTS DRAIN COCKS DRUM FAUCET STUDS & NUTS THICKNESS GAUGES CALIPER ANTI-FREEZE TESTER CLAMPS PUSH-PULL CONTROLS UTILITY SPRINGS VERNIER CONTROL, HEAVY DUTY CHOKE CONVERSION KITS UNIVERSAL SPEEDOMETER CABLE KIT CONTROL WIRE STOPS CARBURETOR & THROTTLE RETURN SPRINGS SHIM STOCKS SNAP FASTENERS LIFT-THE-DOT FASTENERS TURN FASTENERS GROMMETS MAGNETS VACUUM CONNECTORS TAPS & DIES THREAD CUTTING TOOLS DRILL SETS

SOLID RUBBER, BLOCK TYPE STABILIZERS STABILISATEURS EN CAOUTCHOUC SOLIDE 25 Corrects sagging of coil springs, bottoming and side sway. Convenient skin-packed card contains four stabilizers. No. 25-03 For front coils only No. 25-057 For rear coils only 25-03 Order by Card Number 25-057 Order by Card Number Complete installation instructions on back of each card. HEAVY DUTY RUBBER STABILIZERS STABILISATEURS EN CAOUTCHOUC CHARGES ROBUSTES Recommended for rough road conditions and heavy duty applications such as taxis and police cars, etc. 25-059 Order by Card Number ADJUSTABLE COIL SPRING EXPANDER RELEVEURS DE RESSORT RÈGLABLE 25 Expands sagging coil springs for improved riding and steering qualities. Convenient skin-packed card contains two expanders and complete installation instructions. Order by Card Number Coil Spring Expander No. 020-882 Contains 2 Spring Expanders. Mounted on an attractive three colour point of purchase display card. Can be hung or set on counter. 25-00 Order by Card Number 98 H. Paulin & Co., a division of The Hillman Group Canada ULC

SPRING CENTRE BOLTS WITH NUTS BOULONS DE CENTRAGE DE RESSORT AVEC ÉCROUS 25 Papco Spring Centre Bolts are made of grade 2 steel, and are furnished with extra long threads in order to make them universal. Fillister head, Universal (long) Fine Threads with Hexagon Nut for all makes of Cars and Trucks (except Ford) DOUBLE THICKNESS NUTS ÉCROUS TRÈS HAUT 02 POZI-LOK DOUBLE NUTS ÉCROUS TRÈS HAUT POZI-LOK 25-23 Papco Double Nuts are used on spring centre bolts, spring U bolts, heavy duty truck wheels, tractor and implement bolts. All double thickness Nuts have UNF (S.A.E.) Fine Threads. Order by Card Number Stock No. Size Height Width 02-08 3/8-24.49 -.509.55 -.52 02-020 7/-20.599 -.9.75 -.88 02-022 /2-20.45 -.7.73 -.750 02-023 9--8.754 -.778.8 -.875 02-024 5/8-8.83 -.857.922 -.938 Standard Package 24 pieces Stock No. Size Height Width 02-027 3/4-.985 -.05.088 -.25 *02-028 7/8-4.40 -.72.29 -.32 *02-030 -/4.294 -.330.450 -.500 *02-034 -/4-2. -.70.82 -.875 Black Finish These Nylon Insert, prevailing torque lock nuts offer excellent vibration resistance and assure positive locking under severe shock. Used for Spring Centre Bolts, Spring U-Bolts etc. UNF Fine Thread. Order by Card Numbers Standard Package 5 pieces Stock No. Size Dimensions Width A Thickness B -08 3/8-24 35/4 4/4-020 7/-20 5/8 49/4-022 /2-20 3/4 3/ -024 5/8-8 5/ BRASS BRAKE BLOCK BOLTS BOULONS POUR SABOT DE FREIN 252 Order by Card Numbers Stock No. Diameter x Length Thread Lgth. Bulk Qty. 25-0 5/ x 3-/2 3 500 25-2 5/ x 5 4 350 25-4 5/ x 7 3 250 25-3/8 x 2 2 700 25-7 3/8 x 2-/2 2 500 25-8 3/8 x 3 2-/2 400 25-9 3/8 x 3-/2 2-/2 325 25-2 3/8 x 4 3 300 25-22 3/8 x 5 3 250 25-23 3/8 x 3 200 25-24 3/8 x 7 3 200 25-25 3/8 x 8 5 200 25-2 3/8 x 9 5 200 25-27 3/8 x 0 5 80 25-28 3/8 x 2 5 50 25-29 7/ x 3 2 300 25-30 7/ x 4 3 250 Note: Bulk is supplied without nuts. Stock No. Size Description 252-22 0-32 x Spec. Flat Brass Screw, Hex. Steel Nut, Lock Washer 252-354 /4-28 x Spec. Flat Brass Screw, Hex. Steel Nut, Lock Washer 252-489 3/8- x Flat Head Brass Screw, Hexagon Steel Nut 252-49 3/8- x -/4 Flat Head Brass Screw, Hexagon Steel Nut 252-493 3/8- x -/2 Flat Head Brass Screw, Hexagon Steel Nut Standard Package 25 Bolts and Nuts Stock No. Diameter x Length Thread Lgth. Bulk Qty. 25-3 7/ x 4-/2 3 225 25-32 7/ x 5 3 225 25-33 7/ x 3 75 25-34 7/ x 7 3 50 25-35 7/ x 8 5 50 25-3 7/ x 9 5 50 25-37 7/ x 0 5 50 25-38 7/ x 2 5 25 25-40 /2 x 4 3 75 25-4 /2 x 4-/2 4 50 25-42 /2 x 5 4 25 25-43 /2 x 4 25 25-44 /2 x 7 4 00 25-45 /2 x 8 4 00 25-4 /2 x 9 4 20 25-47 /2 x 0 4 20 25-48 /2 x 2 4 20 Light High Nuts * 2 Pieces Papco Brass Brake Lining Fasteners, No. 252-22 and No. 252-354 are used to replace rivets on many truck and trailer applications. The 3/8 Dia. Brass Bolts are used on Brake Blocks. In each case the screw is Brass to avoid scoring and the hexagon nuts and lock washers are steel. Standard Package: contains 00 Assemblies 252-22 252-354 252-489 252-49 252-493.800.28.4000 www.hpaulin.com 99

UNIVERSAL TAILPIPE BRACKETS SUPPORT UNIVERSEL DE TUYAU D ÉCHAPPEMENT 25 Used to suspend exhaust system components such as mufflers, catalytic converters and tailpipes. Brackets No. 25-002 and 25-003 are used with muffler clamps. Order by Stock Number Individually Packaged Stock No. Size & Description 25-00 Steel Strap -/2-2-/2 OD Pipe 25-002 4 Rubber Strap - 4 holes 25-003 7 Steel Strap Swivel End 25-00 25-002 25-003 EXHAUST SYSTEM FASTENERS MASTER ASSORTMENT ASSORTIMENT GÉNÉRAL DE FIXATIONS POUR SYSTÈMES D ÉCHAPPEMENT No. 020-39 Contains Cap Screws, Carriage Bolts, Brass and Steel Engine Stud Nuts and Finished Hex Nuts. Gives complete coverage of the most common Exhaust System Fasteners. Sizes and quantities based on popularity. MANIFOLD STUDS AND NUTS MASTER ASSORTMENT ASSORTIMENT GÉNÉRAL DE GOUJONS ET ÉCROUS POUR RÉPARTITEUR No. 020-32 Contains manifold studs and brass nuts. For complete listing, see next page. STARTER BOLTS BOULONS À DEMARREUR 020-39 257 These hexagon washer head medium carbon steel plated bolts are replacements for damaged or missing starter mounting bolts. Order by Card Numbers Stock No. Size Application 257-005 3/8- x -5/ GM 4.4, 5.0 & 5.7 lit. 257-007 3/8- x -7/8 GM 3.8 lit., cyl. 257-02 3/8- x 3-5/8 GM & 8 cyl. 257-05 3/8- x 4-5/ GM 4.4, 5.0 & 5.7 lit. 257-07 3/8- x 4-/2 GM 4.3 & 5.0 lit. 257-08 3/8- x 4-5/8 GM 5.0 & 5.7 lit. Standard Package 5 pieces Stock No. Size Application 257-055 M0 x.5 x 45 GM 2.0, 2.5 & 3.4 lit. 257-00 M0 x.5 x 02 GM 2.8 & 3. lit. 257-05 M0 x.5 x 3 GM 2.0, 2.5 & 3.4 lit. 257-070 M0 x.5 x 8 GM 2.0, 2.2, 2.5, 2.8, 3. & 3.4 lit. ALTERNATOR BOLTS BOULONS À ALTERNATEUR These high-strength, head treated plated bolts are used as alternator mounting bolts on domestic and imported vehicles. Order by Card Numbers Stock No. Size Application 257-05 5/-8 x -/4 Universal 257-0 5/-8 x 5 GM 257-5 3/8- x 3-/8 GM 257-8 3/8- x 4 Chrysler Standard Package 5 pieces Stock No. Size Application 257-20 3/8- x GM 257-25 7/-4 x 5-/2 Ford 257-55 M0 x.5 x 80 GM 257-0 M0 x.5 x 05 GM 200 H. Paulin & Co., a division of The Hillman Group Canada ULC

CYLINDER HEAD BOLT KITS TROUSSE POUR BOULONS DE CULASSE 257 Papco Cylinder Head Bolts are made of high-strength Grade 8 steel. Original bolts may be permanently stretched when torqued. Torque-to-yield bolts MUST be replaced to avoid premature head gasket failure. Type Type 2 Type 3 Type 4 Type Year Cyl. Engine Size Size Kit No. Trq. to Pcs. Factory No. CHRYSLER Yield /Kit 98-up (4) 2.2L (35), 2.5L (53) M x.5 x 20 257-30 Yes 0 50433 987-up () 3.0L (8) SOHC (Mits) M2 x.25 x 02 257-303 Yes MD05959 993-up () 3.5L /2-3 x -7/8 257-304 Yes 5025 957-up (8) (Short) /2-3 x 3-5/8 257-305 No 0 03045 (Medium) /2-3 x 4-/2 No 8 030 (Long) M x.5 x 90 No 2 24320 Type Year Cyl. Engine Size Size Kit No. Trq. to Pcs. Factory No. FORD 98-984 (4).L,.9L Escort M0 x.5 x 30 257-30 Yield Yes /Kit 0 E4FZ-05-A 974-95 (4) 2.3L (40) OHC M2 x.75 x 00 257-3 No 0 D4FZ-05-A 98-up () 2.9L (77), 4.0L (244) Truck M2 x.75 x 73 257-32 Yes ETZ-05-A 98-up () 3.0L (83) Exc: SHO M x.5 x 02 257-33 Yes E8DZ-05-A 2 982-up () 3.8L (232) (Short) M x.5 x 80 257-35 Yes 8 F4SZ-05-B 2 (Long) M x.5 x 00 Yes 8 F4SZ-05-A 99-up (8) 4.L (28) SOHC M x.5 x 20 2573 Yes 20 F5AZ-05-A 2 980-up (8) 4.9L (300) 7/-4 x 4 257-37 Yes 4 F3ZZ-05-B 2 970-up (8) 5.0L (302) (Long) 7/-4 x 4 257-38 Yes 0 F3ZZ-05-B 2 (Short) 7/-4 x 2-7/ Yes 8 F3ZZ-05-C 4 (w/stud) 7/-4 x 3-7/8 Yes 2 F3ZZ-05-D 3 970-up (8) 5.8L (35) Windsor (Short) /2-3 x 2-/2 257-39 No 20 C902-05-A 3 (Long) /2-3 x 4 No 20 C902-05B Type Year Cyl. Engine Size Size Kit No. Trq. to Pcs. Factory No. GENERAL MOTORS Yield /Kit 985-95 (4).L (98) 4, 5, Geo M0 x.5 x 94 257-33 Yes 0 9059 3 982-94 (4).8L, 2.0L, OHC H, K, M M x.5 x 40 257-332 Yes 2 00320 4 (w/stud) M x.5 x 85 Yes 4 00323 4 (w/stud) M x.5 x 5 Yes 4 00324 987-93 (4) 2.3L (38) QUAD IV DOHC M2 x.75 x 83 257-334 Yes 2 225328 (Long) M2 x.75 x 98 Yes 8 2253282 4 980-up (4) 2.5L (5) A, E, 5, R, 2 (w/stud) M x.5 x 25 257-33 Yes 233800 4 (w/stud) M x.5 x 99 Yes 233802 M x.5 x 99 Yes 8 233808 987-9 () 2.8L (73) W, 3.L (89) VIN T M x.5 x 78** 257-338 Yes 8 000033 M x.5 x 08 Yes 8 0227593 982-95 () 2.8L (73), 3.L (89) M, T, W M x.5 x 8 257-339 No 8 47572 M x.5 x 93 No 8 47543 3 975-up ) 3.8L (23) A, B, G 7/-4 x 2-/ 257-340 No 8 24322 2,3,7,8,9,C L 7/-4 x 3-/2 No 8 253539 3 955-up (-8) 4.3L (22) Z, 305, 327 7/-4 x 3-3/4* 257-34 No 4 408237 3 350, 400 7/-4 x -3/4* No 40823 3 7/-4 x 3* No 4 408235 982-up (8).2L (38),.5L (395) Diesel 7/-4 x 3 257-342 No 34 407793 97-up (8) 3, 427, 454 Truck (Long) 7/ x 4-5/4 257-343 No 8 04204, 38778 (Short) 7/ x 2-/ No 24 04205, 38779 Round Head * with GM 9985490 Thread Sealant **with GM 24M Thread Sealant.800.28.4000 www.hpaulin.com 20

SQUARE HEAD PIPE PLUGS BOUCHONS DE TUYAU TÊTE CARRÉE 20 With LOCTITE Vibra-Seal These forged steel pipe plugs are used as drain and filler plugs on all cars, trucks, tractors and stationary engines. Made with Dryseal American National Pipe Threads. For improved reliability Papco Pipe Plugs feature LOCTITE Vibra-Seal pre-applied thread sealant. Iron Pipe Size Stock # Thread Standard Package: 2 Plugs Approximate Dia. Small End 20-90 /8-27 3/8 20-902 /4-8 /2 20-903 3/8-8 5/8 20-904 /2-4 7/8 20-90 3/4-4 GARAGE ASSORTMENT No. 020-043 Contains 20 Square Head Pipe Plugs in /8, /4 and 3/8 iron pipe sizes. Packed in a clear, plastic box. GARAGE ASSORTMENT No. 020-087 Contains 20 Socket Pipe Plugs in /8, /4 and 3/8 iron pipe sizes. Packed in a sturdy, transparent, plastic box. UTILITY ASSORTMENT No. 020-332 Contains 42 Square Head Pipe Plugs in /8, /4, 3/8 and /2 pipe sizes. Packed in a sturdy fibreboard container with moulded compartments. 020-043 020-043 SOCKET PIPE PLUGS BOUCHONS DE TUYAU CREUX 20 Stock # Iron Pipe Size Thread 20-92 /8-27 20-922 /4-8 20-923 3/8-8 20-924 /2-4 Standard Package: 2 Plugs 202 H. Paulin & Co., a division of The Hillman Group Canada ULC

AIR CLEANER WING NUTS ÉCROUS À OREILLES POUR FILTRE À AIR 22 Universal type replacements for lost or stripped Air Cleaner Wing Nuts. Self-threaded series nylon nuts cut their own thread and may be used on either inch or metric hold-down shafts. 22-34 22-3 22-324 22-325 22-32 700-0 700-08 Stock No. Size Description Qty Stock No. Size Description Qty 22-34 /4 & mm Self Threading Nylon 0 22-32 /4-20 Chrysler Nylon 5 22-3 5/ & 8 mm Self Threading Nylon 0 700-0 M x.0 Metric Wing Nut 25 22-324 /4-20 Universal Domestic 0 700-08 M8 x.25 Metric Wing Nut 25 22-325 M x.0 Universal Imports 0 WING NUT AND HOOD PROP CLIP MASTER ASSORTMENT No. 020-08 Contains 90 pieces - sizes of all listed Air Cleaner Wing Nuts as above - plus 5 sizes of Hood Prop Clips (see page 7). Packed in a rigid, all metal lidded box. 020-08.800.28.4000 www.hpaulin.com 203

THROTTLE ROD CLIPS AND RETAINERS ATTACHES DE TIGE À SOUPAPE 22 Papco Throttle Rod Clips are made of hardened spring steel in right and left hand styles. The retainer springs, or hairpin cotters, are measured by the diameter of the centre eye. Type Type 2 Type 3 Type 4 Type 5 Stock No. Size Type Std. Pkg. Stock No. R. Dia. Type Std. Pkg. Stock No. Size Type Std. Pkg. 22-008* 5/32 R 25 22-05* /8 2 25 22-078* 5/32 3 00 22-009* 5/32 L 25 22-00* /4 2 25 22-080 7/32 3 00 22-00* 3/ R 25 22-02* /8 (GM) 4 25 22-084 /4 3 00 22-0* 3/ L 25 22-04* /4 (GM) 4 25 22-08 5/ 3 00 22-04* /4 R 25 22-073* / 3 00 22-088 3/8 3 00 22-05* /4 L 25 22-075* 5/4 3 00 28-5 5/ 5 8 22-054* 3/32 2 25 22-07* /8 3 00 *Retainers CARBURETOR CLIP MASTER ASSORTMENT No. 020-09 Contains 293 pieces, 8 sizes for complete coverage. Packed in an all metal, lidded box. See page for contents listing. THROTTLE ROD CLIP GARAGE ASSORTMENT No. 020-022 Contains 04 pieces, *5 sizes as listed above, includes both clips and hairpin cotters. Packed in a transparent plastic box with individual sections. Useful for carburetor repair jobs. THROTTLE BALL JOINTS JOINTS À ROTULE 020-022 Used to adjust throttle linkages and control rods on automobiles, trucks, snowmobiles, marine and off the road equipment. Made of heat treated carbon steel and bright plated for corrosion resistance. Type G (Solid) High-strength design with good wear resistance for heavy duty service. Oil and gas resistant rubber shield protects against abrasive dirt. Type A (Spring Loaded) Conforms to S.A.E. Standards with case hardened seats and ball studs for extra wear resistance. Spring loaded for zero end-play. Type P (Quick Disconnect) Lightweight economical quick disconnect design. Ball studs can be removed from spring steel retaining clip for making length adjustments. Convenient skin-packed card contains one Ball Joint. ORDER BY CARD NUMBER Individually Carded Card No. Type Size Card No. Type Size 22-203 G 0-32 22-208 G /2-20 22-204 G /4-28 22-20 A 0-32 22-205 G 5/-24 22-2* A /4-28 22-20* G 3/8-24 22-22* A 5/-24 22-207 G 7/-20 22-28 P /4-28 * Most Popular 204 H. Paulin & Co., a division of The Hillman Group Canada ULC

DRAIN COCKS ROBINETS DE VIDANGE 23 Papco Plastic Drain cocks for low pressure applications. For water, air, gas, anti-freeze and other fluids. (Not intended for natural gas, LPG or lubricants.) 23-95 23-952 23-953 23-957 23-959 Order by Card Numbers Plastic Drain Cocks Stock No. Pipe Size Factory No. Appl. 23-95 5/ (7/-20) GM: 30420 23-952 /4 x -/2 GM: 30504 FORD: EFZ-85A 23-953 /4 x -7/8 FORD: E57H-B5A 23-957 0 mm x.25 NISSAN: 2480-RD00 SUBARU: 745-2400 D40-A D40-B D40-C D43-A D44-A D39-A Standard Package 5 pieces Brass Drain Cocks Stock No. Pipe Size Type D40-A /8 Back Sealing D40-B /4 Back Sealing D40-C 3/8 Back Sealing D43-A /8 Outlet Fitting D44-A /8 Outlet Fitting D39-B /4 External Sealing DRAIN COCKS MASTER ASSORTMENT ASSORTIMENT GÉNÉRAL DE ROBINETS DE VIDANGE 23 No. 020-0 Contains 9 pieces of Plastic and Brass Drain Cocks - plus compression Sleeves, Nuts, Unions and four sizes of Hex Head Pipe Plugs. All metal box with hinged lid and handy carrying handle. Plastic, moulded compartmentalized tray. Illustrated lid label with retail price codes and refill stock numbers. 020-0 DRUM FAUCET No. 93-02 For use with oils, kerosene, gasoline, naphtha, alcohol, lacquers, varnishes, thinners, solvents of all kinds, anti-freeze solutions and other liquids, hot or cold. The Papco Sette Faucet is simple in design and has an all nylon seat for extended life. Extra thin liquids that are impossible to hold with ordinary faucets are held absolutely and permanently tight by Papco Sette Faucets. 93-02 Operating Lever Hole for Padlock Nylon Valve Coil Spring 3/4 Pipe Thread Full 3/4 Flow.800.28.4000 www.hpaulin.com 205

ENGINE STUDS AND NUTS GOUJONS ET ÉCROUS DE MOTEUR 24 Papco Engine Studs will service all popular makes of cars. They have extra long threads and can be cut to size where a shorter stud is required. B A C Order by Card Numbers Stock No. Length Dimensions Dia. x A B C 24-0 5/ x -3/4 7/8 UNF 5/8 UNC 24-08 5/ x 2 7/8 UNF 3/4 UNC 24-024 5/ x 2-/2 -/2 UNF /2 UNC 24-032 5/ x 3 -/2 UNF 5/8 UNC 24-048 3/8 x 2 UNF 3/4 UNC 24-049 3/8 x 2 UNC 5/8 UNC 24-058 3/8 x 2-3/4 UNF 3/4 UNC 24-00 3/8 x 3 -/4 UNF 3/4 UNC 24-0 3/8 x 4 2 UNC 3/4 UNC 24-07 3/8 x 4 2 UNF 3/4 UNC 24-08 7/ x -3/4 9/ UNF /2 UNC 24-088 7/ x 2 7/8 UNF 3/4 UNC Standard Package 2 pieces Stock No. Length Dimensions Dia. x A B C 24-092 7/ x 2-/4 7/8 UNF 7/8 UNC 24-094 7/ x 2-3/8 7/8 UNF 5/8 UNC 24-09 7/ x 2-/2 7/8 UNF 3/4 UNC 24-02 7/ x 3-/4-7/8 UNF 5/8 UNC 24-03 7/ x 3-/4 UNF 3/4 UNC 24-08 7/ x 3-5/8-3/4 UNF 5/8 UNC 24-0 7/ x 4-7/8 UNF 5/8 UNC 24-34 /2 x 2-/2 UNF 3/4 UNC 24-40 /2 x 2-7/8 7/8 UNC 3/4 UNC 24-50 /2 x 4 2 UNF 3/4 UNC MANIFOLD STUDS GOUJONS POUR COLLECTEUR 24 Low Carbon Steel Papco Low - Carbon Manifold Studs are easily removed if rusted, broken or stripped. Simply drill out or burn out with a torch. Preferred by muffler shops everywhere. Coarse thread both ends. A A B C C B Order by Card Numbers Stock No. Length Dimensions Dia. x A B C 24-504 3/8- x 2 5/8 NC -/8 NC 24-507 3/8- x 2-/2 5/8 NC -/4 NC 24-509 3/8- x 3 5/8 NC 2 NC 24-50 3/8- x 3-/4 5/8 NC -5/8 NC 24-57 7/-4 x 2-/2 5/8 NC -/4 NC Standard Package 0 pieces Stock No. Length Dimensions Dia. x A B C 24-59 7/ -4 x 3 5/8 NC 2 NC 24-523 7/ -4 x 4 5/8 NC 2 NC 24-40 M8 x.25 x 40 mm 9 mm 24-50 M0 x.5 x 50 mm 9 mm 20 H. Paulin & Co., a division of The Hillman Group Canada ULC

METRIC STUDS GOUJONS DE MOTEUR MÉTRIQUE A 24 Conform to I.S.O. Class 8.8 Specifications. For manifolds, rocker covers and general engine uses. C B For Metric Steel Nuts see page 37. Stock No. Dia. x Pitch x Length A B mm mm C Application 24-230 M x.00 x 30 mm 4 2 VW - 05-03 - 400 24-328 M x.25 x 28 mm 5 0 VWN044-5 - 24-335 M x.25 x 35 mm 7 2 VWN044-54 - 2 24-338 M x.25 x 38 mm 20 0 VWN4-443 - 8 24-34 M x.25 x 4 mm 23 VWN044-40 - 2(-4 ) 24-348 M x.25 x 50 mm 23 0 Universal 24-350 M x.25 x 55 mm 23 0 Universal 24-352 M x.25 x 0 mm 24 0 Universal 24-354 M x.25 x 5 mm 9 0 Universal 24-35 M x.25 x 70 mm 24 0 Universal Standard Package 0 Studs Stock No. Dia. x Pitch x Length A B mm mm C Application 24-440 M x.25 / M0 x.50 x 35 mm 4 (M8) 9 (M0) Universal 24-44 M0 x.25 x 37 mm 3 2 Universal 24-443 M0 x.25 x 43 mm 2 DAT404-N4200 24-450 M0 x.25 x 50 mm 25 5 Universal 24-45 M0 x.50 x 50 mm 25 5 Universal 24-452 M0 x.50 x 52 mm 27 2 Universal 24-453 M0 x.50 x 2 mm 28 2 Universal 24-455 M0 x.50 x 5 mm 4.5 3.5 Universal 24-457 M0 x.50 x 77 mm 28 2 Universal ENGINE STUD NUTS GOUJONS DE MOTEUR Standard Package 25 Nuts Hex Brass Nuts Stock No. Size & Thread Width Across Flats Thickness 24-953 5/ UNF /2 7/4 24-954 5/ UNC /2 7/4 24-955 3/8 UNF 9/ 2/4 24-95 3/8 UNC 9/ 2/4 24-957 3/8 UNC 9/ 5/8 24-958 7/ UNF / 3/8 24-959 7/ UNC 5/8 3/8 24-90 /2 UNF 3/4 7/ 24-9 /2 UNC 3/4 7/ Standard Package 25 Nuts High Strength Steel Nuts Stock No. Size & Thread Width Across Flats Thickness 24-903 5/ UNF /2 7/4 24-905 3/8 UNF 9/ 2/4 24-908 7/ UNF / 3/8 24-909 7/ UNC / 3/8 24-90 /2 UNF 3/4 7/ For Papcolloy Hardened Steel Washers see page 3. ENGINE STUDS AND NUTS MASTER ASSORTMENT ASSORTIMENT GÉNÉRAL DE GOUJONS ET ÉCROUS POUR MOTEUR No. 020-32 Will service all exhaust manifold applications. Complete car coverage. All parts illustrated on hinged lid of sturdy metal merchandiser. Handy carrying handle with snap lock. 020-32 For SUPER-SERVICE ASSORTMENT No. 020-88 of Engine Studs and Nuts please refer to page 0..800.28.4000 www.hpaulin.com 207

THICKNESS GAUGES CALIBRES D ÉPAISSEUR 27 Papco Thickness Gauges are made from No. Grade Swedish Steel, uniformly tempered and are of the highest accuracy obtainable. Each gauge is 2 long by /2 wide and has a hole punched in the end for hanging. The thickness in thousandths is permanently etched on the gauge. Standard package contains six lengths of a size, and each gauge is individually cellophane wrapped. Stock No. Thickness Stock No. Thickness Stock No. Thickness 27-05.005 27-0.00 27-20.020 27-020.002 27-.0 27-22.022 27-025.0025 27-2.02 27-24.024 27-030.003 27-3.03 27-25.025 27-040.004 27-4.04 27-2.02 27-050.005 27-5.05 27-28.028 27-00.00 27-.0 27-30.030 27-070.007 27-7.07 27-32.032 27-080.008 27-8.08 27-40.040 27-090.009 27-9.09 Standard Package: Lengths PRECISION CALIPER COMPAS PRÉCISION No. 022-03 Papco Precision Caliper is made of high impact styrene. Useful for all types of measurements in both inch and metric. Measures inside diameter, outside diameter, length and depth. Scales in / or mm increments. Individually skin-packed. BOLT AND NUT GAUGES CALIBRES POUR BOULONS ET ÉCROUS No. 022-030 Bolt & Screw Gauge Heavy duty, plastic gauge for measuring UNC, UNF and Metric bolts, nuts, screws and studs. Individually packaged. No. 022-034 Ultimate Bolt & Screw Gauge Heavy duty steel construction. Measures bolts, nuts and screws by length, diameter and thread. Includes Imperial and Metric sizes (UNC & UNF) as per IFI Standard. 208 H. Paulin & Co., a division of The Hillman Group Canada ULC

THREAD DETECTIVE IMPERIAL/METRIC IMPÉRIAL/MÉTRIQUE No. 022-85 This Thread Detective is an easy and precise thread identifier for both nuts and bolts, consisting of gliding gauges conveniently assembled onto a wire lanyard. It is well suited for distinguishing between similar inch and metric threads. Thread sizes are stamped onto each gauge and are coated with a PVC shrink tubing ensuring numbers will never rub off. Thread Detective is equipped with a 3-3/8 (85mm) ruler for measuring stud lengths. It has a convenient extra long rope for those hard to reach places, as well as loops on each end for hanging. Inch identifiers consist of nut and bolt sizes -32, 8-32, 0-24, 0-32, /4-20, /4-28, 5/-8, 5/-24, 3/8-, 3/8-24, 7/-4, 7/-20, /2-3 and /2-20. Metric identifiers consist of nut and bolt sizes M4 x 0.7, M5 x 0.8, M x.0, M8 x.0, M8 x.25, M0 x.0, M0 x.25, M0 x.5, M2 x.25, M2 x.5 and M2 x.75. ANTI-FREEZE TESTER VÉRIFICATEUR D ANTIGEL No. 23-999 Tests all ETHYLENE GLYCOL solutions. Allows visual inspection for rust and sediment. Shows both degrees Fahrenheit and Celsius. Individually blister-packed. Winter Protection Accurately and quickly indicates the freezing point of radiator solution. Summer Protection Indicates boiling point of coolant. For Battery Tester 570-250 see page 94..800.28.4000 www.hpaulin.com 209

MUFFLER CLAMPS COLLIERS DE SILENCIEUX 25 Heavy Gauge Steel Pipe Size stamped in clamp Complete coverage from -/4 to 4 Pipe dia. Full depth saddle for extra strength Heavy rolled thread U Bolts Secure fit between tail pipe and muffler SEALTITE WORM GEAR HOSE CLAMPS COLLIERS DE BOYAUX SEALTITE 307 308 QUALITY 30 Stainless Steel Band and Housing. Hi-strength Hex Plated Steel Screw. No loose parts. EASY TO USE Goes on with hose in position. Combination Hex Screw tightens with screw driver or wrench. RANGE Wide size range for each clamp. STRENGTH Wide band for even pressure. Won t cut hose. Full-formed teeth will never slip. All Stainless Steel for 308 Papco Sealtite Hose Clamps are manufactured from the highest quality materials for reliable operation in any Automotive or Industrial applications. The aircraft principle of the worm gear drive gives this clamp a powerful sealing action that meets the toughest requirements. Standard clamp features 30 (8.8) Stainless Steel band and housing with a Zinc Plated Steel Screw. The All-Stainless Steel clamp Features a 30 (8.8) Stainless Steel band and housing with a 305 Stainless Steel Screw. Standard Package: Contains 0 Hose Clamps Stock No. Nominal Fits Hose Stock No. Nominal Fits Hose Standard All-Stainless Size O.D. Standard All-Stainless Size O.D. 307-00 308-00 5/ 7/32-5/8 307-032 308-032 2-9/ - 2-/2 307-002 308-002 7/ 5/ - 7/8 307-03 308-03 2-/4-3/ - 2-3/4 307-008 308-008 /2 7/ - 5/ 307-040 308-040 2-/2 2-/ - 307-00 308-00 5/8 9/ - -/ 307-044 308-044 2-3/4 2-5/ - 3-/4 307-02 308-02 3/4 5/8 - -/4 307-048 308-048 2-9/ - 3-/2 307-0 308-0 / - -/2 307-052 308-052 3-/4 2-3/ - 3-3/4 307-020 308-020 -/4 3/ - -3/4 307-05 308-05 3-/2 3-/ - 4 307-024 308-024 -/2 / - 2 307-00 308-00 3-3/4 3-5/ - 4-/4 307-028 308-028 -3/4-5/ - 2-/4 307-04 308-04 4 3-3/ - 4-/ SNAPPER HOSE CLAMPS COLLIERS DE BOYAUX SNAPPER 307 Papco Muffler Clamps provide a full 30 seal between muffler and pipes. designed for easier installation and trouble-free service. Assembly consists of heavy gauge saddle, U bolt and two nuts, packed in an individual container. Use for Inch and Metric applications Order by Stock Number 5/ diameter U Bolts Stock # Pipe Size Metric Eqv. 25-00 -/4 32 mm 25-02 -/2 38 mm 25-03 -5/8 4 mm 25-04 -3/4 45 mm 25-05 -7/8 48 mm 25-0 2 5 mm 25-07 2-/8 54 mm 25-08 2-/4 57 mm 25-020 2-/2 4 mm Papco Nylon / Snapper Hose Clamps form an instant grip on hoses in automobile repair or whenever a quick application is required. Teeth mesh together and are set by using pliers and released by sliding jaws sideways. Will not rust non-conductive. For pressures up to 20 p.s.i. UV stabilized. Standard Package: 0 Clamps Stock No. Fits Hose Clamp Range Fits Hose Clamp Range Stock No. I.D. Minimum Maximum I.D. Minimum Maximum 307-505 5/ 9/4 /32 307-5 3/4-9/4 307-50 3/8 23/4 25/4 307-57 -/8 -/8-3/4 307-507 7/ 3/32 29/4 307-59 -3/ -7/32-9/4 307-508 /2 33/4 9/32 307-520 -/4-9/32-9/32 307-509 9/ 9/ 2/32 307-522 -/2-5/32-23/32 307-50 5/8 39/4 45/4 307-524 -3/4-47/4 2-/4 307-52 3/4 3/4 27/32 307-52 2 2 2-5/4 307-53 3/ 25/32 29/32 307-528 2-/4 2-/4 2-37/4 307-54 7/8 55/4 3/4 20 H. Paulin & Co., a division of The Hillman Group Canada ULC 3/8 diameter U Bolts Stock # Pipe Size Metric Eqv. 25-4 -3/4 45 mm 25-5 -7/8 48 mm 25-2 5 mm 25-7 2-/8 54 mm 25-8 2-/4 57 mm 25-20 2-/2 4 mm 25-24 3 7 mm 25-28 3-/2 89 mm 25-32 4 02 mm

FUEL INJECTION HOSE CLAMPS COLLIERS DE BOYAUX POUR INJECTEUR D ESSENCE Manufactured specifically for all fuel injection applications. Non-perforated band is aluzinc coated carbon steel with a zinc plated carbon steel screw and nut. Band width approximately 3/8. Standard Package: 0 Clamps Stock No. Fits Hose Clamp Range Stock No. Fits Hose Clamp Range I.D. Minimum Maximum I.D. Minimum Maximum 307-570 /4 7/ /2 307-572 3/8 9/ 5/8 307-57 5/ /2 9/32 GARAGE ASSORTMENT No. 020-09 Contains 28 Hose Clamps - 3 sizes in a compartmentalized, clear styrene plastic box. 020-09 CONSTANT TENSION HOSE CLAMPS COLLIERS DE BOYAUX A TENSION CONSTANTE Metal pinch or squeeze type clamp commonly used on fuel, vacuum and other low pressure lines. Standard Package: 25 Clamps Stock No. Fits Hose Max. Clamp Colour O.D. Dia. Open 307-50 3/8.32 Black 307-5 7/.405 Green 307-52 /2.40 Red 307-54 5/8.583 Olive 307-5 3/4.45 Black 307-58.90 Black GARAGE ASSORTMENT No. 020-097 Contains 55 Clamps - sizes packed in a transparent, plastic container with a hinged lid. 020-097 NYLON CABLE CLAMPS COLLIERS DE CABLE NYLON 400 Papco / Black Nylon Cable Clamps are tough, resilient, light-weight and highly resistant to wear, most chemicals such as gasoline, oil etc. and destructive U-V rays. Used to secure cables, pipes, tubing, wire etc. in automotive, marine, appliance, commercial and residential applications. All Nylon Clamps provide excellent insulation characteristics. Stock No. Cable Size Clamp Width Standard Package Stock No. Cable Size Clamp Width Standard Package 400-522 /4 3/8 50 400-528 5/8 /2 25 400-524 3/8 3/8 50 400-530 3/4 /2 25 400-52 /2 3/8 50 400-532 /2 5 GARAGE ASSORTMENT No. 020-088 Contains 40 pieces - sizes of Nylon Cable Clamps listed above. Packed in a sturdy, clear, plastic box. 020-088 NOTE: For a complete listing of clamps, please refer to our current Dominion Fittings Fluid Flow Components Catalogue..800.28.4000 www.hpaulin.com 2

PUSH-PULL CONTROLS CABELES DE CONTRÔLE 30 For choke, throttle, hood, air vents, heater valves, mowers, snow blowers, power take-off etc. All controls are individually packaged for point of sale display. Stock No. Length Description 30-20 30-2 0 long 72 long Utility Controls Round black knob to complete any dash panel. 2 travel, 3/ OD. Gal. Casing,.054 HC Wire, 3/8-24 housing thread 30-3 80 long Standard Assembly Round lustrous black knob. Includes mounting bracket and finishing washer plated. 2 travel, 3/ OD. Casing,.054 HC Wire, 3/8-24 housing thread 30-52 84 long T handle Assembly Chrome plated metal handle. Plated assembly. Includes mounting bracket and finishing washer. 2 travel, 3/ OD. Casing,.054 HC Wire, 3/8-24 housing thread 30-73 08 long T handle Heavy Duty Locking Assembly Locks with half turn. Brass Clutch. Chrome Handle. Includes dash mount bracket and finishing washer. Full floating core does not turn with handle. 2 travel, 3/ OD. Casing,.02 HC Wire, 3/8-24 housing thread 30-8 72 long T handle Heavy Duty Locking Assembly Turn and lock. Brass locking clutch. Chrome Handle. Plated. Heavy Duty Housing with 2 thread length. Full floating core wire. 2 travel, 3/ OD. Casing,.02 HC Core Wire, ½-20 housing thread 30-83 08 long Marine Control For boats, other marine and hostile environment applications. Casing is 3/ Dia. REINFORCED Nylon. T Handle is chrome plated. Brass housing. Full floating core wire. 2 travel, 3/ Vinyl Coated casing w/hdpe Liner,.02 Stainless Core Wire, 3/8-24 housing thread. 30-94 30-98 20 long 240 long Power Take Off Controls Used primarily as dash mounted power takeoff control on trucks and mobile equipment. Nylon lined, metal reinforced vinyl casing. Plated for corrosion resistance. Large 2 Dia. round plastic knob. 7/-20 x -/2 long housing. Includes mounting nut and lock washer. Individually boxed. 4 travel, 5/ Vinyl Coated Casing,.09 Stainless Core Wire, 7/-20 housing thread 22 H. Paulin & Co., a division of The Hillman Group Canada ULC

HEAVY DUTY VERNIER CONTROL CONTRÔLE VERNIER EXTRA-ROBUSTE 30 Recommended for heavy truck, bus, agricultural and off-highway uses. Heavy duty easy-action control for critical adjustments. This accurate Vernier Control has a unique three prong locking collar. Designed for one-hand setting and locking in place. Make accurate fine adjustments by rotating knob - depress central button and push or pull for coarse setting. Long life working parts are brass and stainless, weather resistant 5/ O.D. reinforced vinyl casing and liner,.072 stainless steel core wire x 20 long. Housing is 3/4- x 2-9/ long with hex panel nut, mounting nut and lock washer. Travel is 3-5/8. No. 30-2 20 long, individually boxed. 30-2 CHOKE CONVERSION KITS TROUSSES DES CONVERSION A L ÉTRANGLEUR Helps eliminate hard winter starts. Allows driver to control choke. Instant control of air and gas mixture from dash. Order by stock number. Complete instructions included. Individually packaged. SEMI-AUTOMATIC TYPE No. 30-245 Allows manual override. Exclusive Magic-Link lets engine breathe even under full choke. Fits AMC, GM, Ford and Chrysler cars. 0 cable. No. 30-24 Fits all light and medium domestic trucks. Has long 08 cable. COMPLETE MANUAL OPERATION TYPE No. 30-250 Universal kit. For most domestic made cars. Cable is 0 long. 30-24 Installed UNIVERSAL SPEEDOMETER CABLE KIT TROUSSE DE CABLE POUR INDICATEUR DE VITESSE This complete kit includes 8 long standard multi-strand flexible shafting with.04 squared lower end. Cut shafting to length of original speedometer cable and attach the square tip with the staking tool provided. Fits most cars, trucks and RV s. No. 30-28 Individually Packaged 8 Flexible shafting, tip and tool. 30-28 Staking tool Flexible shafting Tip CONTROL WIRE STOPS BLOQUEURS POUR CONTRÔLE DE BROCH Universal type. For push-pull controls, choke control wires, hood release latches and throttle cables. Position cable stop against control arm of lever and tighten screw. Order by stock number. Standard package 25 pieces. No. 30-353 No. 30-354 /4 for - wire. 3/8 for /8 wire. 30-353 30-354.800.28.4000 www.hpaulin.com 23

CARBURETOR AND THROTTLE RETURN SPRINGS RESSORTS DE CARBURATEUR ET SOUPAPE DE RÉGLAGE Stock No. Description 3-00 Universal Throttle Return Spring. Can be adapted for use on all carburetor and accelerator pedals. Spring measures 2 overall and plain end can be cut to required length. Standard Package: Contains 2 Springs 3-002 Carburetor Return Spring. Attach to screw on carburetor body and hook to throttle valve arm. Acts as a helper spring for throttle return - prevents racing and sticking accelerator. For G.M. and Chrysler cars. CARBURETOR SPRING DISPLAY ASSORTIMENT RESSORT DE CARBURATEUR No. 020-878 Contains 2 each No. 3-00, No. 3-002 Springs mounted on attractive three colour merchandising display card. 020-878 UNIVERSAL PEDAL RETURN SPRINGS RESSORTS REVENIR DE PÉDALE UNIVERSEL FOR ALL BRAKE AND CLUTCH PEDALS No. 3-0 8-/2 overall x 3/ O.D. x 2 Coil x 7/4 Dia. wire. 3-0 No. 3-03 8-/2 overall x 3/4 O.D. x 3-/2 Coil x / Dia. wire. Standard Package 2 Springs 3-03 24 H. Paulin & Co., a division of The Hillman Group Canada ULC

UTILITY SPRINGS RESSORTS D UTILITÉ 3 COMPRESSION TYPE / EXTENSION TYPE In sizes suitable for most requirements COMPRESSION TYPE Standard Package: 2 Pieces Stock No. Outside Dia. Length Wire Size Stock No. Outside Dia. Length Wire Size 3-39 3/32 7/8.020 3-0 3/8 -/2.05 3-7 3/ 5.02 3-55 7/ 2-3/4.045 3-5 /4 -/2.04 3-22 7/.02 3-77 /4 5.034 3-82 7/ 5.02 3-8 9/32 2.022 3-83 /2 5.072 3-78 5/ 5.047 3-20 5/8 2-/2.08 3-79 5/ 5.054 3-4 5/8.02 3-5 3/8 2.034 3-53 5/8 3-3/8.080 3-50 3/8 2-3/4.045 3-02 5/8 -/2.057 3-80 3/8 5.054 3-03 7/8 0.08 3-8 3/8 5.02 EXTENSION TYPE Standard Package: 2 Pieces Stock No. Outside Dia. Length Wire Size Stock No. Outside Dia. Length Wire Size 3-33 /8 9/.08 3-30 5/ 5-3/8.04 3-84 /8 5/.020 3-08 5/.034 3-34 /8-3/8.08 3-59 5/ -3/4.034 3-2 5/32 2-/8.028 3-58 5/ 7-/4.045 3-3 3/ -/8.025 3-0 /32.04 3-3/ -/4.04 3-85 3/8-7/8.0 3-23 3/ 2-/2.028 3-29 3/8 4-3/4.045 3-27 7/32 2-/4.034 3-3 3/8.054 3-7 /4 -/8.020 3-2 7/ 3-/8.04 3-24 /4 3-3/4.034 3-0 7/ 5.02 3-09 /4 4.028 3-7/ -3/8.054 3-07 /4 5-3/4.028 3-05 7/ -/2.04 3-35 9/32 -/8.020 3- /2 4-/2.02 3-28 9/32-7/8.034 3-04 /2 5-/2.080 3-25 5/ 2-/2.034 3-32 /2.02.800.28.4000 www.hpaulin.com 25

UTILITY SPRING ASSORTMENTS ASSORTIMENTS DE RESSORT D UTILITÉ GARAGE ASSORTMENT No. 020-03 Contains 00 Small Coil Springs. Compression and Extension types included. Packed in plastic box. 020-03 UTILITY ASSORTMENT No. 020-342 Contains 83 Extension and Compression Springs 5 Popular Sizes. Packed in a sturdy fibreboard container. 020-342 MASTER ASSORTMENT No. 020-37 Contains 35 Utility Springs, consisting of Compression, Extension and Ignition Springs. With this Assortment you will find a spring suitable for most any replacement. The attractive label shows the dimensions, stock number and list price of each spring. Refills may be ordered from standard stock. Assortment is packed in a sturdy, sectional metal container complete with self-locking handle. 020-37 EXTENSION SPRING ASSORTMENT No. 020-80 Contains 30 Extension Springs. 2 popular sizes. 020-80 COMPRESSION SPRING ASSORTMENT No. 020-8 Contains 40 Compression Springs. 2 popular sizes. 020-8 2 H. Paulin & Co., a division of The Hillman Group Canada ULC

BRASS SHIM STOCK FEUILLES POUR CALE LAITON 305 Papco Brass Shim Stock is uniform and accurate in thickness, hard temper and is ideal for cutting and shaping. The wide x 00 long rolls are supplied in fibre dispenser tubes for easy use. Stock No. Thickness Stock No. Thickness 00 Inch Strips 305-0.00 305-08.008 305-02.002 305-09.009 305-03.003 305-0.00 305-04.004 305-2.02 305-05.005 305-5.05 305-0.00 305-20.020 305-07.007 305-25.025 STEEL SHIM STOCK FEUILLES POUR CALE ACIER 305 Papco Steel Shim Stock is hard shim temper and uniform in thickness. Supplied in strips 00 inches long by inches wide as listed. Each strip is packed in a sturdy fibre tube. Stock No. Thickness Stock No. Thickness Stock No. Thickness Stock No. Thickness " Wide by 00" Long 30-0.00 30-04.004 30-07.007 30-2.02 30-02.002 30-05.005 30-08.008 30-5.05 30-03.003 30-0.00 30-0.00 30-20.020 Note: Stainless Steel Shim Stock available price on application..800.28.4000 www.hpaulin.com 27

SNAP FASTENERS ATTACHES SNAP 400 Durable Fasteners Papco Snap Fasteners provide superior snap action and holding strength. Snap Fasteners are self-piercing and made of heavy duty, nickel plated brass. Used in a variety of materials on boats, tents, sporting goods, RV s, luggage, awnings, clothing - camper, convertible and tonneau tops. Stock No. Description Standard Package 400-980 3/8 Socket - Normal Action 25 400-98 3/8 Post - 0 mm dia. 25 400-982 3/8 Stud 25 400-983 3/8 Cap 24 mm dia. 25 400-984 3/8 Screw Stud No. 8 25 400-985 3/8 Bolt Stud 0-32 25 400-997 Installation Tool 400-980 400-98 400-982 400-997 400-983 400-984 400-985 LIFT-THE-DOT FASTENERS ATTACHES LIFT-THE-DOT Strong, heavy duty fasteners that lock on 3 sides. Opened by lifting the fourth side where the dot and trademark appear. Stock No. Description Standard Package 400-900 No. 8 Wood Screw Stud 25 400-902 Stud 25 400-903 Socket 25 400-904 Washer 25 400-93 Back Plate 25 400-903 400-93 400-900 400-902 400-904 TURN FASTENERS ATTACHES TOURNANTES Also known as Common Sense Fasteners Papco Turn Fasteners are positive locking and never open accidentally. Spring mechanism contained in stud holds fastener under tension until turned by hand. Stock No. Description Standard Package 400-90 Turn Button 0 400-905 Back Plate 25 400-90 Turn Button 0 400-9 Washer 25 400-92 Grommet 25 400-92 400-9 400-90 400-905 400-90 28 H. Paulin & Co., a division of The Hillman Group Canada ULC

GARAGE ASSORTMENT No. 020-09 Contains 25 pieces including installation tool of the most popular Snap Fasteners packed in a sturdy, transparent box. 020-09 No. 020-092 Contains 20 pieces of Lift-the-Dot Fasteners in a clear, compartmentalized plastic box. No. 020-093 020-092 Contains 20 pieces of Papco Turn Fasteners packed in a clear, plastic container with hinged lid. BRASS GROMMETS BAGUES EN LATION 400 Solid Brass, tooth type grommets are recommended for extra holding power and corrosion resistance. Use grommets on tents, tarpaulins, trucks, sails, awnings, boat covers, pool covers, lawn furniture etc. Available in two sizes: No. 400-958 3/8 I.D. and No. 400-90 /2 I.D. Order by stock number. Standard package 0 pieces per bag. 3/8 GROMMET KIT No. 400-98 Consists of hole punch, flaring punch and anvil base. Includes 0 solid Brass 3/8 grommets with tooth type washers. Packed with instructions in a re-usable hang-up vinyl pouch. Professional quality tool kit. 400-98 /2 GROMMET KIT No. 400-970 Professional setting tool and ten /2 grommets as above. 400-970.800.28.4000 www.hpaulin.com 29

CERAMIC MAGNETS AIMANTS CÉRAMIQUES Papco High Strength Ceramic Magnets are ideal for temporary attachment of metal panels, work orders or masking material without damaging painted areas or other metal surfaces. CERAMIC BLOCK MAGNETS Stock No. Width Length Height Package 400-002 7/8-7/8 3/8 2 CERAMIC DISC MAGNETS Stock No. Diameter Height Package 400-004 /2 3/ 0 400-005 3/4 3/8 8 400-002 400-005 MAGNETIC STRIP BANDE AIMANTE No. 400-00 Flexible, Magnetic Strip with adhesive back, cuts easily with scissors or a knife. Magnetic surface of strip holds small metal objects. Ideal for Body Shops for holding plastic masking material or work orders to vehicle body areas without damaging painted surfaces. Perfect for mounting signs. Size: /2 wide x 0 feet long. Order by stock number. 400-00 LIFTING MAGNET (HEAVY DUTY) AIMANT RÉCUPERATEUR (USAGE INTENSE) USAGE INTENSE No. 400-020 For commercial, recreational or household use. Ideal for removing dents in metal. Retrieve submerged tools, metal parts, tackle, fishing poles etc. Locate, lift, hold or hang steel articles. Order by stock number. Individually packaged. 400-020 Lifts up to 50 lbs TOOL MAGNETIZER / DEMAGNETIZER OUTIL À AIMANTER / DÉ-AIMANTER No. 400-022 Easy-to-use tool magnetizes screwdrivers, wrenches and other small tools. Pass tool through centre hole of charger to magnetize. To demagnetize pass tool over outside edge of charger several times. Order by stock number. MAGNETIC RETRIEVER RAMASSE-PIÈCES AIMANTE No. 400-024 This chrome plated, telescopic tool has a powerful, permanent NEODYMIUM magnetic tip that will lift over 3.5 pounds. The retriever can be used to pick-up steel objects, dropped tools, fasteners etc. from hard-to-reach places. Six inches long with a handy pocket clip, extends to over 24. Can also be used as a presentation pointer. Order by stock number. Individually carded. 400-022 400-024 Magnetize Demagnetize 220 H. Paulin & Co., a division of The Hillman Group Canada ULC

VACUUM CONNECTORS RACCORDS À DÉPRESSION 904 Papco Plastic Fittings are designed for quick, easy, inexpensive installations of vacuum lines, windshield washer lines and any other low pressure systems using air or fluids. Can be used with all flexible plastic tubing. Not recommended for fuel line applications. Nylon Straight Connector Nylon Y Connector ABS Plastic Universal Tee Standard Package: 25 Pieces Stock No. Tube Size 904-90 /8 x /8 904-902 3/ x 3/ 904-903 /4 x /4 904-904 5/ x 5/ 904-905 3/8 x 3/8 Nylon Reducing Straight Connector Stock No. Tube Size 904-940 /8 x /8 x /8 904-94 3/ x 3/ x 3/ 904-942 /4 x /4 x /4 904-943 5/ x 5/ x 5/ Nylon Reducing Y Connector Stock No. Tube Size 904-975 5/32 to /4 to 3/8 ABS Plastic Universal Straight Connector Stock No. Tube Size 904-9 /8 x 3/ 904-92 /8 x /4 904-93 3/ x /4 904-94 /4 x 3/8 Nylon Restrictor Connector Stock No. Tube Size 940-920 3/ x 3/ Nylon 3 Way Tee Stock No. Tube Size 904-922 /8 x /8 x /8 904-923 3/ x 3/ x 3/ 904-924 /4 x /4 x /4 904-925 5/ x 5/ x 5/ 904-92 3/8 x 3/8 x 3/8 Nylon 3 Way Reducing Tee A Stock No. Tube Size A x B x C 904-944 /4 x /4 x 3/ Nylon 90 Elbow Stock No. Tube Size x Pipe Size 940-950 /8 x /8 940-95 3/ x 3/ 940-952 /4 x /4 940-953 5/ x 5/ Nylon 4 Way Connector C B Stock No. Tube size 904-97 5/32 to /4 to 3/8 Vacuum Caps Stock No. Hose Size 904-990 /8 904-99 3/ 904-992 /4 904-993 5/ 904-994 3/8 Soft Rubber Vacuum Tee Stock No. Hose Size 904-985 7/4 x 7/7 x 7/4 Soft Rubber Vacuum Connectors A B Stock No. Tube Size 904-90 3/ Dual Stock No. Tube Size A x B x C 904-929 /8 x /8 x 3/ 904-930 /8 x /8 x /4 904-93 3/ x /8 x 3/ 904-932 3/ x /4 x 3/ 904-933 3/ x 3/ x /8 904-934 /4 x 3/ x 3/ 904-938* /4 x 3/8 x 3/8 904-939 3/8 x 3/8 x /4 *PCV Connector C Nylon 5 Way Connector Stock No. Tube Size 904-95 3/ For MASTER ASSORTMENT No. 020-05 of Vacuum Connectors please refer to page 7. Stock No. Tube Size 904-98 5/32 Dual 904-987 /8 x 5/32 Soft Rubber Vacuum Elbow and Hose Hose Stock No. Hose Size 904-988 5/32 x 3/ 904-989 5/32 x 2" Hose.800.28.4000 www.hpaulin.com 22

TAPS & DIES TARAUDS & FILIÈRES Papco Taps and Dies are made of high carbon tool Steel, heat treated to industrial specifications and packed in colourcoded, protective packs. Long-life, plug type taps are chamfered for easy starting and cut clean accurate threads. Hexagon dies in sizes to /2 and M2 are across flats - larger sizes are -7/ across flats. Use Die Stock No. 99-53 or wrench for driving dies. Papco Taps and Dies are available in NC (National Coarse), NF (National Fine); Metric Standard, Fine and Extra Fine thread pitch - plus N.P.T. (National Pipe Thread) and B.S.P. (British Standard Pipe) for fittings on Import vehicles. Tap and drill sizes are engraved on each tap - starting side and size engraved on dies. HIGH CARBON STEEL INDUSTRIAL GRADE TAPS AND DIES MERCHANDISERS Nos. 022-08 022-09 022-0 Hex Die Plug Tap NC/NF MERCHANDISER No. 022-08 As illustrated. Contains one each of /4 to /2 Coarse and Fine Thread Taps and Dies - 20 sizes. Includes wire rack, header sign and label strips. METRIC MERCHANDISER No. 022-09 Contains one each of all listed sizes of Metric Standard, Fine and Extra Fine thread pitch Taps and Dies - 8 sizes. Includes wire rack, header sign and label strips. PAPCO HIGH CARBON STEEL, PLUG TYPE TAPS Individually Packaged 022-08 022-09 022-0 Stock No. Size Drill Stock No. Size Drill Stock No. Size Drill Stock No. Size Drill NC National Coarse NF National Fine Metric Pipe 99-00 0-24 5/32 99-0 0-32 5/32 99-204 M4 x.7 /8 99-250 /8-27 NPT /32 99-04 /4-20 3/4 99-4 /4-28 7/32 99-205 M5 x.8 /4 99-252 /4-8 NPT 7/ 99-0 5/-8 7/4 99-5/-24 7/4 99-20 M x..0 3/4 99-254 3/8-8 NPT 37/4 99-08 3/8-5/ 99-8 3/8-24 2/4 99-208 M8 x.25 7/4 99-25 /2-4 NPT 23/32 99-020 7/-4 3/8 99-20 7/-20 25/4 99-20 M0 x.5 /32 99-257 /8-28 BS 5/ 99-022 /2-3 27/4 99-22 /2-20 29/4 99-22 M2 x.75 27/4 99-230 M8 x.0 F 9/32 99-23 M0 x.25 F /32 99-232 M2 x.5 F 3/32 F - Fine Thread Pitch 99-240 M0 x.0 XF 23/4 XF - Extra Fine Thread (Spark Plug) PAPCO HIGH CARBON STEEL, HEXAGON DIES ( AF) Individually Packaged 022-08 022-09 022-0 Stock No. Size Stock No. Size Stock No. Size Stock No. Size NC National Coarse NF National Fine Metric Pipe 99-34 /4-20 99-44 /4-28 99-505 M5 x.8 99-540 /8-27 NPT 99-3 5/-8 99-4 5/-24 99-50 M x.0 99-542 /4-8 NPT 99-38 3/8-99-48 3/8-24 99-508 M8 x.25 99-547 /8-28 NPT 99-320 7/-4 99-420 7/-20 99-50 M0 x.5 99-550 Screw Extractor Set 99-322 /2-3 99-422 /2-20 99-52 M2 x.75 99-55 Straight Flute Screw Extractor 99-530 M8 x.0 F 99-552 Straight Flute Screw Extractor 99-53 M0 x.25 XF 99-553 Straight Flute Screw Extractor 99-532 M2 x.5 F 99-554 Straight Flute Screw Extractor 99-555 Straight Flute Screw Extractor 99-570 Inch Screw Pitch Gauge 99-57 Metric Screw (* -7/ AF) F - Fine Thread Pitch 222 H. Paulin & Co., a division of The Hillman Group Canada ULC MERCHANDISER No. 022-0 Contains one each of NPT and BSP Taps and Dies, No. to 5 Screw Extractors, Screw Extractor Set, Inch and Metric Thread Pitch Gauges and a professional Tap and Reamer Wrench. Includes pegboard hooks, header sign and planogram.

THREAD CUTTING TOOLS AND MERCHANDISERS PRÉSENTOIRS ET OUTILS AUTO-TARAUDEUSES SCREW EXTRACTORS These chrome-vanadium straight flute extractors are heat treated to give the highest torque specification and may be used with any wrench. Straight tapered flute will not expand the screw or stud being removed. Drill size engraved on each individually packed extractor. Stock No. Size Fits Screw Dia. Use Drill 99-55 No. /4, 5/, M, M8 /8 99-552 No. 2 3/8, M0, /8-27, /8-28 99-553 No. 3* 3/ 7/, M2 5/4 99-554 No. 4 /2, 9/, M4, /4-8 5/ 99-555 No. 5 5/8, M, 3/8-8 3/8 *Use for broken Grease Fittings SCREW EXTRACTORS SET No. 99-550 Consists of five extractors - One each of No. to 5 as listed above. 99-550 TOOLS OUTILS T - HANDLE TAP WRENCH No. 99-50 Fits taps from No. 0 to /4 and features adjustable, self-equalizing wrench jaws. Handle is held in place by spring tension. Individually carded. 99-50 T - HANDLE TAP WRENCH No. 99-5 Fits /4 to /2 taps. Features a removable handle-plus a 3/8 female square drive for extensions or ratchet drive. Individually carded. 99-5 PROFESSIONAL TAP WRENCH DIE STOCK No. 99-52 Fits taps from M4 to /2. Industrial quality tool is used for taps, reamers and screw extractors. Adjustable, hardened jaws tighten by turning handles. Individually carded. 99-52 No. 99-53 Professional Die Holder fits hexagon or round dies up to /2 or M2. Has three jaw, selfcentering, adjustable guides for easy starting and accurate threading. Chrome plated handles. Individually carded. 99-53 SCREW PITCH GAUGES No. 99-570 (Inch) For inch threads. 4 blades for threads from 0 to 40 per inch. Individually packaged. (Inch pitch is the number of threads per inch T.P.I.) 99-570 No. 99-57 (Metric) For metric threads. 4 blades for pitches from 0.45 to 2.50 mm. Individually packed. (Metric pitch is the distance between threads.) 99-57.800.28.4000 www.hpaulin.com 223

HIGH SPEED STEEL INDUSTRIAL GRADE DRILL BITS FORETS ACIER RAPIDE QUALITÉ INDUSTRIELS These jobber length high speed tool steel drill bits feature a ground body and polished flutes for fast chip removal. Suitable for drilling steel, wood and plastic. Bits are packaged on bar-coded hang-up cards individually (* 2 bits). DRILL BIT MERCHANDISER No. 022-5 Contains each of the 29 sizes of drill bits from / to /2 by 4th., including 3/8 reduced shanks, /4 to /2 Masonry Bits - and /8 double-ended panel drills. A total of 82 cards including an attractive header sign and merchandising rack suitable for wall, pegboard, counter, or gondola display. /8 DOUBLE ENDED PANEL DRILL No. 997-594 High speed ground steel with special 35 split point. Made for body panel work. Starts cutting on contact, won t wander, no centre punch required. /8 Dia. x 2 long doubleended. Packed 5 bits per pouch. 997-594 997-20 022-5 Stock No. Diameter Length Overall Stock No. Diameter Length Overall Stock No. Diameter Length Overall High Speed Steel Drills High Speed Steel Drills High Speed Steel Drills 997-04* / -7/8 997-7 7/4 4-/8 997-30 5/32 5-3/4 997-05* 5/4 2 997-8 9/32 4-/4 997-3 3/4 5-7/8 997-0* 3/32 2-/4 997-9 9/4 4-3/8 997-32 /2 997-07* 7/4 2-5/8 997-20 5/ 4-/2 Masonry Drills - Carbide Tip 997-08* /8 2-3/4 997-2 2/4 4-5/8 997-58 3/ 3-3/8 997-09 9/4 2-7/8 997-22 /32 4-3/4 997-587 /4 4 997-0 5/32 3-/8 997-23 23/4 4-7/8 997-588 5/ 4-3/4 997- /4 3-/4 997-24 3/8 5 997-589 3/8 4-3/4 997-2 3/ 3-/2 997-25 25/4 5-/8 997-590 /2 5-7/8 997-3 3/4 3-5/8 997-2 3/32 5-/4 997-59 5/8 997-4 7/32 3-3/4 997-27 27/4 5-3/8 997-592 3/4 997-5 5/4 3-7/8 997-28 7/ 5-/2 997- /4 4 997-29 29/4 5-5/8 * These sizes 2 bits Per card. 3/8 Reduced Shank 224 H. Paulin & Co., a division of The Hillman Group Canada ULC

DRILL SETS JEU DE FORETS HIGH SPEED STEEL INDUSTRIAL GRADE DRILL BITS 5 SETS WILL FILL ALL YOUR DRILL BIT NEEDS! A B C E D A No. 020-907 4 Pieces /, /8, 3/, /4 H.S.S. Pic-a-drill clear vinyl pouch. The 4 most popular drill sizes. Ideal as a basic kit or to replace worn drills in larger sets. B No. 020-90 0 Pieces / to /4 H.S.S. Pic-a-drill rigid styrene case hangs or stands on workbench. Each drill in a separate compartment. Good size coverage in a handy box. /, 5/4, 3/32, 7/4, /8, 9/4, 5/32, 3/, 7/32, /4. F No. 022-4 A balanced stock of 4 Pic-a-drill sets. No. 020-907, 3 No. 020-90, 2 No. 020-93, 2 No. 020-94 and No. 020-92. Includes header sign and merchandising rack. Suitable for wall, pegboard, counter or gondola display. Size: W x 4 H (Illustrated below.) C No. 020-93 3 Pieces / to /4 H.S.S. Pic-a-drill revolving case. 3 popular sizes in a new design rotating case. Dial each size as needed. /, 5/4, 3/32, 7/4, /8, 9/4, 5/32, /4, 3/, 3/4, 7/32, 5/4, /4. D No. 020-94 4 Pieces / to /2 with shanks reduced to 3/8. Pic-a-drill strong folding polypropylene case holds and protects this fine set. /, 5/4, 3/32, 7/4, /8, 9/4, 5/32, 3/, 7/32, /4, 5/, 3/8, and 7/, /2, with 3/8 reduced shanks. E No. 020-92 2 pieces / to 3/8 by 4ths. H.S.S. A complete range of sizes for all requirements. Pic-a-drill revolving case has clear rotating top for fast selection. Drill sizes clearly indexed. F.800.28.4000 www.hpaulin.com 225

NOTES 22 H. Paulin & Co., a division of The Hillman Group Canada ULC

PERMA-THREAD PERMA-THREAD HELICALLY COILED INSERTS PERMA-PLUG SPARK PLUG REPAIR KIT

PERMA-THREAD HELICALLY COILED INSERTS INSERTIONS HÉLICOÏDAUX PERMA-THREAD Repair defective, stripped or damaged threads quickly and permanently. These inserts are made of diamond shaped stainless steel wire formed into a spiral screw thread coil. They form a thread which is stronger than the original tapped material. The resilient quality of the insert allows it to adjust to eliminate stress concentration. The Perma-Thread insert restores the hole to its initial size a bolt or screw of the original size can be used for reassembly. Full instructions for using the Perma-Thread inserts are provided in each Repair Kit.. Drill 2. Tap 3. Install THREAD REPAIR MASTER ASSORTMENT No. 020-3 Includes contents of one Repair Kit of each 0-24, /4-20, 5/-8, 3/8-, 7/-4, /2-3 and 4 mm with 3/8, 7/, /2 and 3/4 reach. 020-3 THREAD REPAIR CENTRE No. 208-3 Stock the most popular Perma-Thread Inserts on this colourful, metal display. Five complete Thread Repair Kits: /4-20, 5/-8, 3/8-, 7/-4, /2-3 - plus five packs of inserts. Also one 4 mm Spark Plug Kit (Tap and Tool) and three packs of plug inserts. Fourteen items plus rack. METRIC THREAD REPAIR CENTRE 208-3 No. 22-3 Includes four Metric Thread Repair Kits: M5 x.8, M x.0, M8 x.25 and M0 x.5 - plus two Spark Plug Kits (Tap and Tool) for 2 mm and 4 mm plugs. Also four packs of plug inserts. Fourteen items plus rack. 228 H. Paulin & Co., a division of The Hillman Group Canada ULC 4. Restored

PERMA-PLUG SPARK PLUG REPAIR KIT TROUSSE DE RÉPARATION DE BOUGIE PERMA-PLUG No. 2200-4 Includes one each of the items listed below: Can be used with M4 x.25 taper seat or gasket type Spark Plugs in either aluminum or cast iron. Easily installed without drilling becomes a permanent repair. Tap Piloted Tap Select Insert Inserts Install Expanding Tool Repaired Short 224-S Lubricate tap. Start by hand then use socket to tap hole full depth. Clean chips from hole. Select insert length same as threads on spark plug. Coat outside threads with hi-temp RTV silicone. Knurled end of insert should be at top of hole. Normal 224-N Using spark plug, screw insert in until flush with spark plug hole. 2258-4 Long 224-L 2294-4 Place tool into insert and strike several times to expand knurl and lock insert. Install plug to recommended torque. Run engine after sealant has set. PERMA-PLUG DISPLAY CENTRE No. 400- Contents and Replacement Parts Stock No. Description Quantity 2200-4 M4 x.25 Perma-Plug Kit 3 224-S M4 x.25 x 3/8 Short Reach Insert 4 224-N M4 x.25 x /2 Normal Reach Insert 4 224-L M4 x.25 x 3/4 Long Reach Insert 4 400-.800.28.4000 www.hpaulin.com 229

PERMA-THREAD HELICALLY COILED INSERTS INSERTIONS HÉLICOÏDAUX PERMA-THREAD ORDER BY PART NUMBER Repair Kits Inserts High Speed Steel Tap Installation Tool Repair Kits for field or shop use. Complete Kits: Inserts-taps-tools. Spark Plug Combination Piloted Reamer/Tap No drilling for spark plug port repair.. Threaded Pilot aligns tool to correct port angle. 2. Reamer removes stripped or damaged threads. 3. Tap cuts new thread to accept Perma-Thread insert. Repair Kits contain inserts, tap and installation tools. Inserts also available in standard packages. Standard Packages Repair Kits Taps Tools Size Insert Pkg Drill Qty Kit Inserts Tap Tool Dia. x Length Part No. Size Per Pack Stock No. Per Kit Part No. Part No. Unified National Coarse 4-40.8 P208-04 /8 2 208-04 2 428-04 82-04 5-40.88 P208-05 9/4 2 208-05 2 428-05 82-05 -32.207 P208-0 5/32 2 208-0 2 428-0 82-0 8-32.24 P208-08 /4 2 208-08 2 428-08 82-08 0-24.285 P208-0 3/4 2 208-0 2 428-0 82-0 2-24.324 P208-02 5/4 2 208-02 2 428-02 82-02 /4-20.375 P208-04 7/4 2 208-04 2 428-04 82-04 5/-8.49 P208-05 2/4 2 208-05 2 428-05 82-05 3/8-.52 P208-0 25/4 2 208-0 2 428-0 82-0 7/-4.5 P208-07 29/4 208-07 428-07 82-07 /2-3.750 P208-08 7/32 208-08 428-08 82-08 9/-2.844 P208-09 9/32 208-09 428-09 82-09 5/8-.938 P208-0 2/32 208-0 428-0 82-0 3/4-0.25 P208-2 25/32 4 208-2 4 428-2 82-2 7/8-9.32 P08-4 29/32 3208-C4 043-4CP3 82-4 -8.500 P08- -/32 3208-C 043-CP3 82- -/8-7.88 P08-8 -5/32 3208-C8 5 043-8CP3 82-8 -/4-7.875 P08-20 -9/32 3208-C20 5 043-20CP3 82-20 -3/8-2.02 P08-22 -3/32 3208-C22 4 043-22CP3 82-22 -/2-2.250 P08-24 -7/32 3208-C24 4 043-24CP3 82-24 Unified National Fine 0-32.285 P208-20 3/4 2 208-20 2 428-20 72-20 /4-28.375 P208-204 7/4 2 208-204 2 428-204 72-204 5/-24.49 P208-205 2/4 2 208-205 2 428-205 72-205 3/8-24.52 P208-20 25/4 2 208-20 2 428-20 72-20 7/-20.5 P208-207 29/4 208-207 428-207 72-207 /2-20.750 P208-208 33/4 208-208 428-208 72-208 9/-8.844 P208-209 37/4 208-209 428-209 72-209 5/8-8.938 P208-20 4/4 208-20 428-20 72-20 3/4-.25 P208-22 49/4 4 208-22 4 428-22 72-22 7/8-4.32 P08-24 57/4 3208-F4 043-4FP3 039-4F -4.500 P08-24 -/4 3208-F4 043-4FP3 039-4F -/8-2.88 P08-28 -5/32 3208-F8 5 043-8FP3 039-8F -/4-2.875 P08-220 -9/32 3208-F20 5 043-20FP3 039-20F -3/8-2 2.02 P08-222 -3/32 3208-F22 4 043-22FP3 039-22F -/2-2 2.250 P08-224 -7/32 3208-F24 4 043-24FP3 039-24F Standard Metric Coarse Thread M5 x 0.8 7.5 mm P20-305 3/4 2 22-305 2 448-305 287-305 M x.0 9.0 mm P20-30 /4 2 22-30 2 448-30 287-30 M7 x.0 0.5 mm P20-307 9/32 2 22-307 2 448-307 289-307 M8 x.25 2.0 mm P20-308 2/4 2 22-308 2 448-308 289-308 M9 x.25 3.5 mm P20-309 m9.4 2 22-309 2 448-309 289-309 M0 x.50 5.0 mm P20-30 3/32 2 22-30 2 448-30 289-30 M x.50.5 mm P0-3 29/4 22-3 448-3 289-3 M2 x.75 8.0 mm P0-32 3/4 322-M2C 5043-20CP4 289-32 M4 x 2.0 2.0 mm P0-34 37/4 322-M4C 5043-40CP4 289-34 M x 2.0 24.0 mm P0-3 2/32 322-MC 5043-0CP4 289-3 M8 x 2.5 27.0 mm P0-38 47/4 322-M8C 5043-80CP4 289-38 M20 x 2.5 30.0 mm P0-320 3/ 322-M20C 5043-200CP4 289-320 Fine Thread M0 x.25 5.0 mm P0-0 3/32 322-M0F 5043-00FP4 287-0 M x.25.5 mm P0-25 29/4 22-M25 448-25 287-25 M2 x.25 8.0 mm P0-2 3/4 322-M2F 5043-20FP4 287-2 M2 x.5 8.0 mm P0-25 3/4 322-M25 5043-25P4 287-25 M4 x.5 2.0 mm P0-4 9/ 322-M4F 5043-40FP4 287-4 M x.5 24.0 mm P0-2/32 322-MF 5043-0FP4 287- Spark Plug - Do not use these inserts to repair taper seat spark plug ports M0 x.0.500 P40-500 - 20-40* - 458-00 094-00 M2 x.25.500 P42-500 - 22-42* - 458-23 094-23 M2 x.25.750 P42-750 - - - - - M4 x.25.375 P44-375 - 24-44* - 458-43 094-43 M4 x.25.438 P44-438 - - - - - M4 x.25.500 P44-500 - - - - - M4 x.25.750 P44-750 - - - - - M8 x.50.500 P48-500 - 28-500 458-85 094-85 Perma-Plug Spark Plug - Can be used with taper seat or gasket type spark plugs M4 x.25.375 224S - - - - - M4 x.25.500 224N - 2200-4 - 2258-4 2294-4 M4 x.25.750 224L - - - - - * NOTE: 0mm,2mm and 4mm spark plug kits contain combination piloted Reamer/Tap tool and NO inserts. Same tools are applicable regardless of insert length. Purchase packs of inserts separately. Perma-Thread Repair Kits include: Inserts, Tap, Installation Tool, Instructions unless otherwise specified. 230 H. Paulin & Co., a division of The Hillman Group Canada ULC

AN INTRODUCTION TO... STAINLESS STEEL ACIER INOXYDABLE UNE INTRODUCTION. For a full listing of Stainless Steel, please refer to our current catalogue or visit our website to download a PDF version. HEX BOLTS CARRIAGE BOLTS LAG BOLTS SOCKET HEAD CAP SCREWS FINISHED HEX NUTS NYLON INSERT STOP NUTS HEX MACHINE SCREW NUTS WASHERS COTTER PINS THREADED RODS MACHINE SCREWS

8.8 STAINLESS STEEL HEX BOLTS BOULONS HEX EN ACIER INOXYDABLE 8,8 5000 Stock No. Corrosion resistant Type 300 (8% chromium - 8% nickel). Used in marine applications, food processing equipment and wherever resistance to most acids and chemicals is required. Non-magnetic. UNC thread. Size Std. Pkg. Stock No. Size Std. Pkg. Stock No. Size Std. Pkg. Stock No. Order by stock number. 5000-307 /4-20 x 3/4 00 5000-442 5/-8 x 3/4 00 5000-487 3/8- x 3/4 00 5000-577 /2-3 x 3/4 25 5000-309 /4-20 x 00 5000-444 5/-8 x 00 5000-489 3/8- x 00 5000-579 /2-3 x 25 5000-33 /4-20 x -/2 00 5000-448 5/-8 x -/2 00 5000-493 3/8- x -/2 00 5000-583 /2-3 x -/2 25 5000-3 /4-20 x 2 00 5000-45 5/-8 x 2 00 5000-49 3/8- x 2 00 5000-58 /2-3 x 2 20 5000-38 /4-20 x 2-/2 50 5000-453 5/-8 x 2-/2 50 5000-498 3/8- x 2-/2 50 5000-588 /2-3 x 2-/2 20 5000-320 /4-20 x 3 25 5000-455 5/-8 x 3 25 5000-500 3/8- x 3 25 5000-590 /2-3 x 3 0 Size Std. Pkg. 8.8 STAINLESS STEEL CARRIAGE BOLTS BOULONS DE CARROSSE ACIER INOXYDABLE 8,8 5002 Order by stock number. Stock No. Size Std Pkg. Stock No. Size Std. Pkg. Stock No. Size Std.Pkg. 5002-309 /4-20 x 00 5002-444 5/-8 x 50 5002-489 3/8- x 50 5002-33 /4-20 x -/2 00 5002-448 5/-8 x -/2 50 5002-493 3/8- x -/2 50 5002-3 /4-20 x 2 00 5002-45 5/-8 x 2 50 5002-49 3/8- x 2 25 5002-38 /4-20 x 2-/2 50 5002-453 5/-8 x 2-/2 25 5002-498 3/8- x 2-/2 25 5002-320 /4-20 x 3 50 5002-455 5/-8 x 3 25 5002-500 3/8- x 3 25 5002-324 /4-20 x 4 25 5002-459 5/-8 x 4 25 5002-504 3/8- x 4 0 8.8 STAINLESS STEEL LAG BOLTS TIRE-FOND ACIER INOXYDABLE 8,8 5003 Order by stock number. Stock No. Size Std. Pkg. Stock No. Size Std. Pkg. 5003-309 /4-20 x 50 5/-8 x 5003-493 3/8- x -/2 50 5003-58 /2-3 x 2 50 5003-33 /4-20 x -/2 50 5003-448 5/-8 x -/2 50 5003-49 3/8- x 2 50 5003-588 /2-3 x 2-/2 25 5003-3 /4-20 x 2 50 5003-45 5/-8 x 2 50 5003-498 3/8- x 2-/2 25 5003-590 /2-3 x 3 25 5003-38 /4-20 x 2-/2 25 5003-453 5/-8 x 2-/2 25 5003-500 3/8- x 3 25 5003-594 /2-3 x 4 20 5003-320 /4-20 x 3 25 5003-455 5/-8 x 3 25 5003-504 3/8- x 4 20 5003-324 /4-20 x 4 20 5003-459 5/-8 x 4 20 Stock No. Size Std. Pkg. Stock No. Size Std. Pkg. 8.8 STAINLESS STEEL SOCKET HEAD CAP SCREWS BOULONS DE PRESSION ACIER INOXYDABLE 8,8 500 UNC Order by stock number. Stock No. Size Std. Pkg. Stock No. Size Std. Pkg. 500-309 /4-20 x 00 500-444 5/-8 x 00 500-489 3/8- x 00 500-579 /2-3 x 50 500-33 /4-20 x -/2 00 500-448 5/-8 x -/2 00 500-493 3/8- x -/2 00 500-583 /2-3 x -/2 50 500-3 /4-20 x 2 00 500-45 5/-8 x 2 00 500-49 3/8- x 2 50 500-58 /2-3 x 2 50 500-38 /4-20 x 2-/2 00 500-453 5/-8 x 2-/2 00 500-498 3/8- x 2-/2 50 500-588 /2-3 x 2-/2 25 500-320 /4-20 x 3 50 500-455 5/-8 x 3 50 500-500 3/8- x 3 50 500-590 /2-3 x 3 25 Stock No. Size Std. Pkg. Stock No. Size Std. Pkg. 232 H. Paulin & Co., a division of The Hillman Group Canada ULC

8.8 STAINLESS STEEL FINISHED HEX NUTS ÉCROUS HEX ACIER INOXYDABLE 8,8 502 Order by stock number. Stock No. Bolt Size Std. Pkg. 502-04 /4-20 00 502-0 5/-8 00 502-08 3/8-00 502-022 /2-3 50 8.8 STAINLESS STEEL NYLON INSERT STOP NUTS ÉCROUS À BLOCAGE NYLON INOXYDABLE 8,8 5034 Order by stock number. Stock No. Bolt Size Std. Pkg. 5034-00 -32 00 5034-008 8-32 00 5034-00 0-24 00 5034-0 0-32 00 5034-04 /4-20 00 5034-0 5/-8 00 5034-08 3/8-00 5034-022 /2-3 50 8.8 STAINLESS STEEL HEX MACHINE SCREW NUTS ÉCROUS POUR VIS DE MÉCANIQUE ACIER INOXYDABLE 8,8 5035 Order by stock number. Stock No. Bolt Size Std. Pkg. 5035-00 -32 00 5035-008 8-32 00 5035-00 0-24 00 5035-04 /4-20 00 For a complete listing of non-ferrous and stainless fasteners see separate Papco Corrosion Resistant Catalogue. 8.8 STAINLESS STEEL WASHER RONDELLES ACIER INOXYDABLE 8,8 5055 8.8 Flat Washers Order by stock number. Stock No. Bolt Size I.D. O.D. Thickness Std. Pkg. 5055-20 No..5 3/8.03 00 5055-208 No. 8.74 3/8.03 00 5055-20 No. 0.203 7/.03 00 5055-24 /4.28 5/8.050 00 5055-2 5/.345 3/4.050 00 5055-28 3/8.40 7/8.050 00 5055-222 /2.53 -/4.02 50 505 8.8 Finishing Washers Order by stock number. Stock No. Screw Size Std. Pkg. 505-97 No. 00 505-973 No. 8 00 505-975 No. 0 00 505-979 /4 00 5057 8.8 Fender Washers Order by stock number. Stock No. Bolt Size O.D. Std. Pkg. 5057-394 No. 0 00 5057-395 /4 -/4 00 5057-39 5/ -/2 00 5057-398 3/8 -/2 00 5057-400 /2 2 50 5058 8.8 Regular Lock Washers Order by stock number. Stock No. Bolt Size Std. Pkg. 5058-04 /4 00 5058-0 5/ 00 5058-08 3/8 00 5058-022 /2 00.800.28.4000 www.hpaulin.com 233

8.8 STAINLESS COTTER PINS GOUPILLES ACIER INOXYDABLE 8,8 5080 Order by stock number. Stock No. Size Std. Pkg. 5080-09 3/32 x 00 5080-095 3/32 x -/2 00 5080-4 /8 x 00 5080-45 /8 x -/2 00 5080-48 /8 x 2 00 5080-7 5/32 x -/2 00 5080-74 5/32 x 2 00 8.8 STAINLESS STEEL THREADED ROD TIGES FILETÉES ACIER INOXYDABLE 8,8 509 Std. Pkg. as required. Order by stock number. Stock No. Size Stock No. Size 509-30 0-24 x 509-354 /4-20 x 72 509-34 /4-20 x 509-35 5/-8 x 72 509-3 5/-8 x 509-358 3/8- x 72 509-38 3/8- x 509-32 /2-3 x 72 509-322 /2-3 x 509-34 5/8- x 72 509-324 5/8- x 509-3 3/4-0 x 72 509-32 3/4-0 X Note: Fine Thread long Threaded Rods are available price on application. 8.8 STAINLESS MACHINE SCREWS VIS DE MÉCANIQUE INOXYDABLE 8,8 53 OVAL 54 PAN PHILLIPS Order by stock number. Stock No. Size Std. Pkg. 53-087 54-087 -32 x /2 00 53-09 54-09 -32 x 00 53-4 54-4 8-32 x 00 53-93 54-93 0-24 x 00 53-97 54-97 0-24 x -/2 00 53-200 54-200 0-24 x 2 00 53-33 54-33 /4-20 x -/2 00 53-3 54-3 /4-20 x 2 00 8.8 STAINLESS TAPPING SCREWS VIS TARAUDEUSES INOXYDABLE 8,8 52 SQUARE DRIVE Order by stock number. Stock No. Size Std. Pkg. 52-089 x 3/4 00 52-39 8 x 3/4 00 52-4 8 x 00 52-93 0 x 00 52-95 0 x -/4 00 52-97 0 x -/2 00 52-254 2 x -/2 00 8.8 STAINLESS TAPPING SCREWS - TYPE A VIS TARAUDEUSES INOXYDABLE 8,8 53 PAN 55 OVAL Order by stock number. Stock No. Size Std. Pkg. 53-043 55-043 4 x /2 00 53-089 55-089 x 3/4 00 53-09 55-09 x 00 53-39 55-39 8 x 3/4 00 53-4 55-4 8 x 00 53-9 55-9 0 x 3/4 00 53-93 55-93 0 x 00 234 H. Paulin & Co., a division of The Hillman Group Canada ULC

8.8 STAINLESS STEEL -LOBE TRIM SCREWS VIS FINITION À SIX PANS ACIER INOXYDABLE 8,8 23 CHROME PLATED OVAL -LOBE HEAD 8.8 STAINLESS Part No. Dia x Length Qty. 23-205 4.2 x 20 mm 25 23-209 4.2 x 30 mm 25 23-23 4.2 x 40 mm 25 23-29 4.2 x 55 mm 25 BLACK OXIDE OVAL -LOBE HEAD 8.8 STAINLESS Part No. Dia x Length Qty. 23-20 4.2 x 20 mm 25 23-20 4.2 x 30 mm 25 CHROME PLATED PAN -LOBE HEAD 8.8 STAINLESS Part No. Dia x Length Qty. 23-25 4.2 x 20 mm 25 23-257 4.2 x 35 mm 25 BLACK OXIDE PAN -LOBE HEAD 8.8 STAINLESS Part No. Dia x Length Qty. 23-252 4.2 x 20 mm 25 23-24 4.2 x 50 mm 25 STAINLESS GARAGE ASSORTMENT ASSORTIMENT DE GARAGE INOXYDABLE No. 020-22 Contains 0 pieces - 8 sizes of Pan and Oval Socket 8.8 Stainless Steel Tapping Screws and 2 sizes of 8.8 Stainless Finishing Washers packed in a transparent plastic box. 020-22 MARINE FASTENERS MASTER ASSORTMENT ASSORTIMENT GÉNÉRAL D ATTACHES MARIN This Master Assortment is ideal for the boat owner for attaching railings, brackets, swivels, posts and other marine equipment and accessories. Each product is fully illustrated on the price coded lid label. Excellent for self-serve sales. Metal box with high-strength, moulded plastic compartments and safety locking lid. No. 020-73 Contains 20 sizes of Stainless Steel Tapping Screws, Wood Screws, Machine Screws, Nuts and Finishing Washers. PLASTIC ASSORTMENT KITS ASSORTIMENTS DE PLASTIQUE No. 02-00 S.S. MARINE KIT # BOLTS, NUTS & WASHERS Contains 54 pieces, 3 types of bolts, 4 types of nuts and 3 types of washers. No. 02-0 S.S. MARINE KIT #2 SCREWS, WASHERS & BITS Contains 48 pieces, 3 types of screws, 2 types of driver bits and washers. For more information on Plastic Assortment S.S. Marine Kits No. 02-00 & No. 02-0 please refer to pages 9 & 2. 020-73 02-00 02-0.800.28.4000 www.hpaulin.com 235

NOTES 23 H. Paulin & Co., a division of The Hillman Group Canada ULC

AN INTRODUCTION TO... BRAKE LINES TUBULURES DE FREIN UNE INTRODUCTION. For a full listing of Papco Flex Lines, Adaptors, Fittings and Tools, please refer to our current catalogue or visit our website to download a PDF version. HYDRAULIC BRAKE LINES BRAKE LINE MERCHANDISERS BRAKE LINE TUBING BRAKE LINE FITTINGS BRAKE BLEEDER SCREWS HYDRAULIC GREASE FITTINGS HYDRAULIC BRAKE FITTINGS

STEEL HYDRAULIC BRAKE LINES TUBULURE DE FREIN HYDRAULIQUE Papcoflex Steel Hydraulic Brake Lines are ideal replacement parts for hydraulic brake, transmission, gas, oil and vacuum lines used on all cars, trucks, buses and tractors.. All Papco Brake Lines feature a copper brazed, double-walled steel construction coupled with a zinc outer coating that provides resistance to rust, leakage, pressure and vibration. 2. Papco lines comply to GM23M-ASV and S.A.E. J527B, have wall thickness of 0.028 (0.70mm) and withstands pressures to 7,000 psi. 3. All Papco lines can easily be shaped by hand to duplicate the original without crimping or collapsing. Papcoflex POLY-V Coated Brake Lines feature a polyvinyl flouride coating to resist corrosion, nicks and dents while providing up to 30 times the protection of standard steel brake lines. Papcoflex Armoured Steel Brake Lines feature the highest degree of protection against common road hazzards. Each steel line is wound the entire length with a 0.04 diameter high carbon, galvanized wire and comes complete with flared fittings. Tubing Brake Lines are guaranteed for the life of the vehicle and afford the ultimate resistance to corrosion. Easiest to bend and flare. Guarantee is limited to the replacement of the product under normal wear and tear circumstances and the proper preparation (flaring) of the lines and installation. S - STEEL Overall Length P - POLY-V AS - ARMOURED STEEL CN - COPPER NICKEL 3/ O.D. /4 O.D. 5/ O.D. 3/8 O.D. S P AS CN S P AS CN S P AS CN S P AS CN S-30 - AS-30 - - - - - - - - - - - - - 8 S-308 PS-308 AS-308 CN-308 S-408 PS-408 AS-408 CN-408 S-508 PS-508 AS-508 CN-508 S-08 PS-08 - CN-08 0 S-30 - AS-30 - S-40 - - - S-50 PS-50 AS-50 - S-0 - AS-0-2 S-32 PS-32 AS-32 CN-32 S-42 PS-42 AS-42 CN-42 S-52 PS-52 AS-52 CN-52 S-2 PS-2 AS-2 CN-2 20 S-320 PS-320 AS-320 CN-320 S-420 PS-420 AS-420 CN-420 S-520 PS-520 AS-520 CN-520 S-20 PS-20 AS-20 CN-20 30 S-330 PS-330 AS-330 CN-330 S-430 PS-430 AS-430 CN-430 S-530 PS-530 AS-530 CN-530 S-30 PS-30 AS-30 CN-30 40 S-340 PS-340 AS-340 CN-340 S-440 PS-440 AS-440 CN-440 S-540 PS-540 AS-540 CN-540 S-40 PS-40 AS-40 CN-40 5 S-35 PS-35 AS-35 CN-35 S-45 PS-45 AS-45 CN-45 S-55 PS-55 AS-55 CN-55 S-5 PS-5 AS-5 CN-5 0 S-30 PS-30 AS-30 CN-30 S-40 PS-40 AS-40 CN-40 S-50 PS-50 AS-50 CN-50 S-0 PS-0 AS-0 CN-0 72 S-372 PS-372 AS-372 CN-372 S-472 PS-472 AS-472 CN-472 S-572 PS-572 AS-572 CN-572 S-72 PS-72 AS-72 CN-72 METRIC BRAKE LINES All the proven features of the Papcoflex Steel Hydraulic Brake Line. Available in three types, all 3/ diameter and in popular lengths as listed. Type A : Metric Thread with standard flare. For Nissan, Honda, Mazda and Toyota. Type B : U.S. Thread with bubble flare. For Austin, Cortina, Cricket, Fiat, Jaguar, M.G. and Triumph. Type C : Metric Thread with bubble flare. For BMW, Citroen, Mercedes-Benz, Peugeot, Porsche, VW. S - STEEL Overall Length P - POLY-V CN - COPPER NICKEL TYPE A TYPE B TYPE C TYPE T.0 mm O.D. GM / IMPORTS S P CN S P CN S P CN S CN S CN 8 MA308 PMA-308 CNMA-308 MB308 PMB-308 CNMB-308 MC308 PMC-308 CNMC-308 MT308 CNMT-308 MM308 CNMM-308 2 MA32 PMA-32 CNMA-32 MB32 PMB-32 CNMB-32 MC32 PMC-32 CNMC-32 MT32 CNMT-32 MM32 CNMM-32 20 MA320 PMA-320 CNMA-320 MB320 PMB-320 CNMB-320 MC320 PMC-320 CNMC-320 MT320 CNMT-320 MM320 CNMM-320 30 MA330 PMA-330 CNMA-330 MB330 PMB-330 CNMB-330 MC330 PMC-330 CNMC-330 MT330 CNMT-330 MM330 CNMM-330 40 MA340 PMA-340 CNMA-340 MB340 PMB-340 CNMB-340 MC340 PMC-340 CNMC-340 MT340 CNMT-340 MM340 CNMM-340 5 MA35 PMA-35 CNMA-35 MB35 PMB-35 CNMB-35 MC35 PMC-35 CNMC-35 MT35 CNMT-35 MM35 CNMM-35 0 MA30 PMA-30 CNMA-30 MB30 PMB-30 CNMB-30 MC30 PMC-30 CNMC-30 MT30 CNMT-30 MM30 CNMM-30 NOTE: Type T Lines Toyota / GM Long Nut. 238 H. Paulin & Co., a division of The Hillman Group Canada ULC

STEEL BRAKE LINE MERCHANDISERS PRÉSENTOIRS TUBULURE DE FREIN Papcoflex steel brake line floor merchandisers are available in 5 variations and may be linked together to form a master warehouse stock to cover almost every brake line requirement. Compact wire rack measures 9-/2 w x 20-/2 d x 28 h and includes colour-coded, permanent PVC storage tubes for dispensing lines. Each Papcoflex Brake Line is labelled showing part number, O.D. and length. STEEL BRAKE LINE MERCHANDISER No. 022-285 Contains 3 each of 28 sizes of Papcoflex Brake Lines for a total of 84 lines. Rack and tubes included. POLY-V COATED BRAKE LINES MERCHANDISER No. 022-585 Contains 3 each of 28 sizes of POLY-V Coated Steel Brake Lines for a total of 84 lines. Rack and tubes included. S - STEEL P - POLY-V 3/ O.D. /4 O.D. 5/ O.D. 3/8 O.D. S P S P S P S P 8 S-308 PS-308 S-408 PS-408 S-508 PS-508 S-0 PS-08 2 S-32 PS-32 S-42 PS-42 S-52 PS-52 S-2 PS-2 20 S-320 PS-320 S-420 PS-420 S-520 PS-520 S-20 PS-20 30 S-330 PS-330 S-430 PS-430 S-530 PS-530 S-30 PS-30 40 S-340 PS-340 S-440 PS-440 S-540 PS-540 S-40 PS-40 5 S-35 PS-35 S-45 PS-45 S-55 PS-55 S-5 PS-5 0 S-30 PS-30 S-40 PS-40 S-50 PS-50 S-0 PS-0 Overall Length ARMOURED BRAKE LINE MERCHANDISER No. 022-28 Contains 3 each of 28 sizes of Papcoflex Armoured Brake Lines for a total of 84 lines. Rack and tubes included. AS - ARMOURED STEEL 3/ O.D. /4 O.D. 5/ O.D. 3/8 O.D. AS AS AS AS 8 AS-308 AS-408 AS-508 AS-0 2 AS-32 AS-42 AS-52 AS-2 20 AS-320 AS-420 AS-520 AS-20 30 AS-330 AS-430 AS-530 AS-30 40 AS-340 AS-440 AS-540 AS-40 5 AS-35 AS-45 AS-55 AS-5 0 AS-30 AS-40 AS-50 AS-0 Overall Length No. 022-284 Empty Wire Rack (with tubes and colour-coded labels to create your own mix of lines) METRIC BRAKE LINE MERCHANDISER No. 022-287 Contains 3 each of 2 sizes of Papcoflex Metric Brake Lines for a total of 3 lines. Rack and tubes included. POLY-V COATED METRIC BRAKE LINES MERCHANDISER 022-58 Contains 3 each of 2 sizes of POLY-V Coated Metric Brake Lines for a total of 3 lines. Rack and tubes included. S - STEEL P - POLY-V Overall Length TYPE A JAPANESE TYPE B BRITISH TYPE C EUROPEAN S P S P S P 8 MA308 PMA-308 MB308 PMB-308 MC308 PMC-308 2 MA32 PMA-32 MB32 PMB-32 MC32 PMC-32 20 MA320 PMA-320 MB320 PMB-320 MC320 PMC-320 30 MA330 PMA-330 MB330 PMB-330 MC330 PMC-330 40 MA340 PMA-340 MB340 PMB-340 MC340 PMC-340 5 MA35 PMA-35 MB35 PMB-35 MC35 PMC-350 0 MA30 PMA-30 MB30 PMB-30 MC30 PMC-30 NOTE: PMA POLY-V Brake Lines are supplied with Long Nuts for compatability with Toyota/GM brake line requirements..800.28.4000 www.hpaulin.com 239

BRAKE LINE MERCHANDISERS PRÉSENTOIRS TUBULURE DE FREIN Each merchandiser includes a rugged metal rack complete with measuring gauge. Merchandisers can be hung on a wall, shelf end, or post. When joining two or more brake lines, use Papco Inverted Flare Unions. STEEL BRAKE LINE MERCHANDISERS No. 022-079 Contains 48 Lengths of the most popular 5/ and 3/8 diameter Steel Brake Lines. Four each of 5/ and 3/8 x 2, 20, 30, 40, 5 and 0. No. 022-080 Contains 5 Lengths of the most popular 3/ and /4 diameter Steel Brake Lines. Four each of 3/ and /4 x 8, 2, 20, 30, 40, 5 and 0. ARMOURED STEEL BRAKE LINE MERCHANDISERS No. 022-08 Contains 5 lengths of the most popular 3/ and /4 diameter Armoured Brake Lines. Four each of 3/ and /4 x 8, 2, 20, 30, 40, 5 and 0. No. 022-082 Contains 48 lengths of the most popular 5/ and 3/8 diameter Armoured Brake Lines. Four each of 5/ and 3/8 x 2, 20, 30, 40, 5 and 0. POLY-V COATED BRAKE LINE MERCHANDISER No. 022-587 Contains 5 Lengths of the most popular 3/ and /4 diameter Coated Brake Lines. Four each of 3/ and /4 x 8, 2, 20, 30, 40, 5 and 0. No. 022-588 Contains 48 Lengths of POLY-V Coated Brake Lines. Four each of 5/ and 3/8 x 2, the most popular 5/ and 3/8 diameter 20, 30, 40, 5 and 0. STEEL METRIC BRAKE LINE MERCHANDISER No. 022-483 Contains 42 lines - three of each of the 4 listed lengths of Steel Metric Brake Lines in Type A and C. No. 022-484 Contains 42 lines - three of each of the 4 listed lengths of Steel Metric Brake Lines for Toyota and GM/Imports. POLY-V COATED METRIC BRAKE LINE MERCHANDISER No. 022-485 Contains 42 lines - three of each of the 4 listed lengths of Poly-V coated Metric Brake Lines in Type A and C. EMPTY BRAKE LINE RACKS No. 022-077 For 3/ and /4 Dia. Brake Lines. No. 022-078 For 5/ and 3/8 Dia. Brake Lines. METRIC BRAKE AND FUEL LINE DOMESTIC/EUROPEAN No. 022-077MA METRIC BRAKE AND FUEL LINE TOYOTA/GM No. 022-077MT BRAKE LINE ADAPTOR LINES (STANDARD AND METRIC) No. 022-077AL 240 H. Paulin & Co., a division of The Hillman Group Canada ULC

BRAKE LINE TUBING TUYAU DE FREIN STEEL POLY-V COPPER NICKEL S - STEEL P - POLY-V CN - COPPER NICKEL Standard coil length - 25 ft. Outside Dia. Steel POLY-V COPPER Wall NICKEL thickness 3/ 90-3 PC-325 CN-325 /4 90-4 PC-425 CN-425 0.28 5/ 90-5 PC-525 CN-525 3/8 90- PC-25 CN-25 COPPER TUBING Construction: Cold drawn to size, seamless and fully annealed alloy. Advantages: Soft temper permits single and double flares as well as easy hand shaping. Applications: Suitable for refrigeration, gasoline and oil lines on automobiles, trucks, marine and diesel engines, oil burners, water lines, industrial and general purpose use. Available in 25*, 50 and 00 foot coils. Stock No. Outside Wall Weight W/P psi 25 ft. 50 ft. 00 ft. Dia. Thick. Per 00 ft. @00 F 90-22 90-222 90-223 /8.030 3.5 lbs. 330 90-23 90-232 90-233 3/.030 5.8 lbs. 990 90-24 90-242 90-243 /4.030 8.0 lbs. 450 90-25 90-252 90-253 5/.032.0 lbs. 230 90-2 90-22 90-23 3/8.032 3.4 lbs. 900 90-27 90-272 90-273 /2.032 8.2 lbs. 740 90-28 90-282 90-283 5/8.035 23.2 lbs. 40 90-29 90-292 90-293 3/4.035 28.0 lbs. 40 * Individually Packaged up to 3/8 O.D. W/P - Working Pressure HYDRAULIC BRAKE FITTINGS RACCORDS DE FREINS HYDRAULIQUES 8 MASTER CYLINDER ADAPTOR LINES (COLOUR CODED) INDIVIDUALLY PACKAGED Steel POLY-V Tube size Thread & Flared Type Thread & Flared Type Colour Code 93-00 P93-00 /4 7/-24 - Inverted 7/-24 - Inverted Gold 93-002* P93-002 3/ 3/8-24 - Inverted 7/-24 - Inverted Red 93-003* P93-003 3/ 3/8-24 - Inverted /2-20 - Inverted Black 93-004* P93-004 3/ 3/8-24 - Inverted /2-20 - Inverted Green 93-005* P93-005 /4 7/-24 - Inverted 9/-8 - Inverted Blue 93-00* P93-00 3/ 3/8-24 - Inverted 9/-8 - Inverted Olive 93-007* P93-007 /4 7/-24 - Inverted /2-20 - Inverted Gold 93-008* P93-008 3/ 3/8-24 - Inverted 0mm-.0 - Bubble Olive 93-009* P93-009 3/ 0mm-.0 - Bubble mm-.0 - Bubble Orange 93-00* P93-00 3/ 0mm-.0 - Bubble 2mm-.0 - Bubble Orange 93-0* P93-0 3/ 0mm-.0 - Bubble 3mm-.0 - Bubble Green 93-02* P93-02 3/ 3/8-24 - Inverted mm-.0 - Bubble Orange 93-03* P93-03 3/ 3/8-24 - Inverted 2mm-.0 - Bubble Blue 93-04* P93-04 3/ 3/8-24 - Inverted 3mm-.5 - Bubble Green 93-05* P93-05 3/ 3/8-24 - Inverted 0mm-.0 - Inverted Blue 93-0 P93-0 /4 7/-24 - Inverted 2mm-.0 - Bubble Olive 93-07 P93-07 mm 2mm-.0 - Bubble 2mm-.5 - Bubble Olive 93-08 P93-08 mm 2mm-.0 - Bubble 4mm-.5 - Bubble Black STEEL MASTER CYLINDER ADAPTOR LINES ASSORTMENT NO. 022-845 Contains a total of 28 Adaptor Lines 2 each of the 4 most popular sizes as indicated above (*) POLY-V COATED STEEL MASTER CYLINDER ADAPTOR LINES ASSORTMENT NO. 022-84 Contains a total of 28 POLY-V Adaptor Lines 2 each of the 4 most popular sizes as indicated above ( ).800.28.4000 www.hpaulin.com 24

BRAKE LINE FITTINGS RACCORDS POUR CONDUITES DE FREINS STEEL TUBE NUTS STANDARD Standard Package 0 Pieces Part No. Tube size Thread size DS4-3 3/ 3/8-24 DS4-4 /4 7/-24 DS4-5 5/ /2-20 DS4-3/8 5/8-8 STEEL TUBE NUTS LONG Standard Package 0 Pieces Part No. Tube size Thread size DSL4-3 3/ 3/8-24 DSL4-4 /4 7/-24 STEEL TUBE NUTS OVERSIZE HEX Standard Package 0 Pieces Part No. Tube size Thread size DS4-4-3 /4 x 3/ 7/-24 DS4-5-3 5/ x 3/ /2-20 DS4-5-4 5/ x /4 /2-20 DS4--3 3/8 x 3/ 5/8-8 DS4--4 3/8 x /4 5/8-8 UNIONS Standard Package 0 Pieces Part No. Tube size Thread size D42-3 3/ 3/8-24 D42-4 /4 7/-24 D42-5 5/ /2-20 D42-3/8 5/8-8 BRAKE BLEEDER SCREWS Standard Package 5 Pieces Part No. Size Application Type 904-200 3/8-24 x.5" Ford 904-20 M0-.0 x 27.5mm GM / Ford 3 904-203 3/8-24 x.9" GM / Ford / Chrysler / Jeep 904-204 M8-.25 x 33mm GM / Honda 3 904-205 M8-.25 x 25.2mm GM / Honda / Acura 2 904-20 /4-28 x.920" Ford / Volvo 904-207 M0-.5 x 29.3mm GM 2 904-209 M7-.0 x 34mm Domestic / Import 904-20 M0-.0 x 35.2mm Domestic / Import 2 904-2 M0-.0 x 3.7mm Toyota / Lexus 2 904-22 M0-.0 x 32.75mm Domestic / Import 904-23 5/-24 x.0" GM 904-24 M7-.0 x 37.mm Most Import 904-25 7/-20 x.2 Ford 2 904-2 M8-.0 x 37.3mm Ford/Mazda/Geo/Isuzu 904-28 Small Repair Insert Universal - stripped threads 2 904-29 Large Repair Insert Universal - stripped threads 2 904-22 M0-.25 x 33.mm Domestic / Import 2 904-230 M8-.0 x 2.4mm Domestic / Import 2 2 3 ADAPTORS STANDARD TO DUAL MASTER CYLINDER Standard Package 2 Pieces Part No. Female Inverted Male Inverted Flare Seat - Thread Flare Seat - Thread D074* 5/ - /2-20 5/ - /2-20 D7732* /4-7/-24 /4-7/-20 D787* 3/ - 3/8-24 5/ - /2-20 D788 3/ - 3/8-24 /4-7/-24 D7828 /4-7/-24 3/ - 3/8-24 D7829 /4-7/-24 5/ - /2-20 D7908 /4-7/-24 3/ - 9/-8 D7909 3/ - 3/8-24 5/ - /2-20 * Seals on hex face BRAKE BLEEDER SCREWS MASTER ASSORTMENT No. 020-04 Contains 4 pieces See page 7 for more details. Part No. Female Inverted Male Inverted Flare Seat - Thread Flare Seat - Thread D790 3/ - 3/8-24 3/ - 9/-20 D79 3/ - 3/8-24 3/ - 9/-8 D792 3/ - 9/-8 3/ - /2-20 D793 3/ - /2-20 3/ - 9/-8 D795 3/8-5/8-8 5/ - /2-20 D79 5/ - /2-20 3/8-5/8-8 D797* 5/ - /2-20 /4-7/-24 242 H. Paulin & Co., a division of The Hillman Group Canada ULC

BRAKE LINE FITTINGS RACCORDS POUR CONDUITES DE FREINS METRIC BRAKE LINE FLARE NUTS Standard Package 0 Pieces Steel Tube size Flare Type Thread-Application Colour Code MA300 3/ Inverted Flare 0mm-.0 - Toyota Blue MA37 3/ Inverted Flare 0mm-.0 - Toyota/GM Blue MA327 3/ Inverted Flare 0mm-.0 - Toyota Blue MA343 3/ Inverted Flare 0mm-.0 - Japanese Blue MB3 3/ Bubble Flare 3/8-24 - British Violet MC300 3/ Bubble Flare 0mm-.0 - Euro/Domestic Olive MC33 /4 Inverted Flare 2mm-.0 - Ford Olive MC34 3/ Bubble Flare 0mm-.0 - VW/Audi Violet MC34 3/ Bubble Flare 2mm-.0 - GM/Ford Blue MC342 3/ Bubble Flare 3mm-.5 - GM/Ford Green MC343 3/ Bubble Flare mm-.5 - GM/Ford Orange/Grey MC2 mm Bubble Flare 2mm-.0 Olive MC3 mm Bubble Flare 2mm-.5 Olive MC4 mm Bubble Flare 4mm- Black METRIC / INCH INVERTED FLARE AND BUBBLE FLARE UNIONS Standard Package 2 Pieces Part No. Tube Size Thread Size Seat Type PC90 3/ 3/8-24 Bubble Fare PC9 3/ M0-.0 Bubble Fare PC92 3/ M0-.0 Inverted Flare PC93 M M2-.0 Inverted Flare ADAPTORS METRIC TO METRIC BUBBLE FLARE Standard Package 2 Pieces Part No. Tube Size Female Bubble Flare Seat Male Bubble Flare Tube PC79 3/ M0-.0 M-.5 PC80 3/ M0-.0 M2-.0 PC8 3/ M0-.0 M3-.5 ADAPTORS INVERTED FLARE TO INCH / METRIC BUBBLE FLARE Standard Package 2 Pieces Part No. Tube Size Female Inverted Flare Seat Male Bubble Flare Tube PC77 3/ 3/8-24 3/8-24 PC78 3/ 3/8-24 M0-.0 ADAPTORS INVERTED FLARE TO METRIC BUBBLE FLARE Standard Package 2 Pieces Part No. Tube Size Female Inverted Flare Sea Male Inverted Flare Tube PC7 3/ 3/8-24 M0-.0.800.28.4000 www.hpaulin.com 243

HYDRAULIC GREASE FITTINGS GRAISSEURS HYDRAULIQUE Papco Hydraulic Grease Fittings are manufactured from high-quality, case hardened steel and are zinc plated to resist corrosion. Each fitting is heat treated and tested to 8,000 p.s.i. Spring-loaded ball check valve ensures a dirt-free lubrication system. Papco Grease Fittings are available in all popular thread types including thread-forming and metric. Standard Package: 25 Pieces Type Straight Type 2 30 Elbow Type 3 45 Elbow Type 4 5 Elbow Type 5 90 Elbow Type Thread-Forming Type 7 Straight Long Stock No. Type Description Stock No. Type Description 904-07 7 /8 NPT Straight Long 904-9 5 /4-28 90 Elbow 904-0 /8 NPT Straight 904-92 5/-24 Straight 904-2 /8 NPT 30 Elbow 904-93 3/8-24 Straight 904-88 3 /8 NPT 45 Elbow 904-90 /4-28 Thread-Forming 904-2 4 /8 NPT 5 Elbow Metric Fittings 904-3 5 /8 NPT 90 Elbow 904-70 mm x.0 Straight 904-27 /4 NPT Straight 904-745 3 mm x.0 45 Elbow 904-29 4 /4 NPT 5 Elbow 904-790 5 mm x.0 90 Elbow 904-4 /4-28 Straight 904-702 8 mm x.0 Straight 904-52 7 /4-28 Straight Long 904-74 3 8 mm x.0 45 Elbow 904-3 3 /4-28 45 Short 904-79 5 8 mm x.0 90 Elbow 904-37 3 /4-28 45 Long 904-703 0 mm x.0 Straight GREASE FITTINGS MASTER ASSORTMENT No. 020-85 Contains 0 pieces of 7 popular sizes. Packed in a rigid all metal box. GREASE FITTINGS ASSORTMENT No. 020-90 (Inch) No. 020-902 (Metric) Each assortment contains 00 Grease Fittings in popular sizes. 020-85 Stock No. Pieces Stock No. Pieces No. 020-90 Inch No. 020-902 Metric 904-4 0 904-70 40 904-0 20 904-702 20 904-37 904-703 0 904-9 904-745 0 904-88 4 904-74 0 904-3 4 904-790 0 020-90 Inch 020-902 Metric 244 H. Paulin & Co., a division of The Hillman Group Canada ULC

AN INTRODUCTION TO... BUILDERS & AGRICULTURAL FASTENERS ATTACHES POUR L AGRICULTURE UNE INTRODUCTION. For a full listing of Builders, & Agricultural Fasteners please refer to our current catalogue or visit our website to download a PDF version. BUILDERS & AGRICULTURAL HARDWARE MERCHANDISER HOOKS & EYE BOLTS LAG THREAD SCREW EYES LIFTING EYES J-BOLTS U-BOLTS TURNBUCKLES & S-HOOKS WIRE ROPE CLIPS & THIMBLES WELDED RINGS & DEES BOLT SNAPS & SWIVELS SPRING & ANIMAL SNAPS SNAPS & PULLEYS CHAIN HOOKS & LATCHES CONNECTION HARDWARE LINKS & CHAIN SWIVELS ROPE LOOPS, CLEATS & CLAMPS ROPE ACCESSORIES LOCK PINS HITCH PINS SHAFT COLLARS & MACHINERY BUSHINGS METRIC SHAFT COLLARS & HITCH PIN CLIPS DISPLAY BOARDS

BUILDERS & AGRICULTURAL HARDWARE MERCHANDISER PRÉSENTOIR DE QUINCAILLERIE DE BÂTIMENTS ET POUR L AGRICULTURE Empty Merchandiser Rack No. 022-00 38"W x 38"D x 75"H DISPLAY BOARDS Choose from 4 product display boards to customize your own 3 panel merchandiser. Empty rack No. 022-00 is supplied at no charge with any order of 3 panels. Each panel is 2 inches wide and 2 inches long and includes an actual size graphic of each product for ease of placement and display hooks. EMPTY MERCHANDISER RACK NO. 022-00 Durable, free-standing unit includes 4 casters for effort-free positioning. Holds 3 display panels and measures 38 inches wide by 38 inches deep by 75 inches tall. FEATURES Highly visible and accessible products Space saving rack Neatly organized presentation of product Helps increase sales All items individually bar-coded For our complete line of Builders and Agricultural Fasteners see our most current catalogue. PANEL ASSORTMENT INDEX Part No. 24 H. Paulin & Co., a division of The Hillman Group Canada ULC Panel No. Description Panel Size 99450 2 Screw Hooks Large 2" x 2" 99452 4 Lag Thread Screw Eyes Large 2" x 2" 99453 5 Lag Thread Screw Eyes & Ceiling Hooks Brass Finish 2" x 2" 99458 0 Eye Bolts Extra Large A 2" x 2" 99459 Eye Bolts Extra Large B 2" x 2" 9940 2 Eye Bolts Extra Large C 2" x 2" 994 3 Eye Bolts Extra Large D 2" x 2" 9942 4 Forged Steel Eye Bolts Plain Galvanized 2" x 2" 9943 5 Forged Steel Eye Bolts With Shoulder Galvanized 2" x 2" 9944 Forged Steel Lifting Eyes Self Colored 2" x 2" 9945 7 Clothesline Hooks & J-Bolts 2" x 2" 9947 9 U-Bolts Large A 2" x 2" 9948 20 U-Bolts Large B 2" x 2" 9949 2 Square U-Bolts 2" x 2" 99470 22 Square U-Bolts Lumber Sized 2" x 2" 9947 23 Turnbuckles Hook & Hook 2" x 2" 99472 24 Turnbuckles Eye & Eye 2" x 2" 99473 25 Turnbuckles Hook & Eye 2" x 2" 99474 2 Turnbuckles E&E and H&E Combination 2" x 2" 99475 27 Forged/Galvanized Turnbuckles Hook & Eye 2" x 2" 9947 28 Forged/Galvanized Turnbuckles Eye & Eye 2" x 2" 99478 30 Wire Rope Clips & Thimbles Large 2" x 2" 99479 3 Welded Rings and Dees 2" x 2" 99480 32 Bolt Snaps & Swivels 2" x 2" 9948 33 Spring and Animal Snaps 2" x 2" 99482 34 Brass Snaps 2" x 2" 99483 35 Awning Pulleys 2" x 2" 99484 3 Heavy Duty Pulleys 2" x 2" 99485 37 Forged/Zinc Eye Type Chain Hooks 2" x 2" 9948 38 Forged/Zinc Clevis Type Chain Hooks 2" x 2" 99487 39 Chain Hooks with Latches 2" x 2" 99488 40 Forged G70 Chain Hooks 2" x 2" 99489 4 Forged/Galvanized Connection Hardware 2" x 2" 99490 42 Links and Chain Swivels 2" x 2" 9949 43 Rope Loops, Cleats, Clamps & Hooks 2" x 2" 99492 44 Rope Accessories 2" x 2" 99493 45 Stainless Steel Eye Bolts, Lag Eyes & Hooks 2" x 2" 99494 4 Stainless Steel U-Bolts 2" x 2" 99495 47 Stainless Steel Turnbuckles, Screw Eyes & S Hooks 2" x 2" 9949 48 Stainless Steel Links, Snaps & Hooks 2" x 2" 99497 49 Bolts Snaps, Spring Snaps & Animal Snaps Combination 2" x 2" 99502 55 Hitch Pins Zinc & Yellow 2" x 2" 99503 5 Hitch Pins Zinc & Yellow Part 2 2" x 2" 99504 57 Hitch Pins Rubber Handle 2" x 2" 99505 58 Hitch Pins Rubber Handle Part 2 2" x 2" 9950 59 Lock Pins Square, Round & Spring 2" x 2" 99507 0 Shaft Collars & Machinery Bushings 2" x 2" 99508 Metric Shaft Collars & Hitch Pins Clips 2" x 2" 99499 50 Blank Black 2" x 2" 2" x 2" 9950 5 Blank Grey 2" x 2" 2" x 2"

Screw Hooks LARGE Panel 2 99450 Total SKUs: 7 Part # Description 32220 Screw Hook Zinc.307 x 4-5/ 32222 Screw Hook Zinc.23 x 4-7/ 32224 Screw Hook Zinc.244 x 4-/8 3222 Screw Hook Zinc.225 x 3-7/8 32228 Screw Hook Zinc.92 x 3-3/8 32238 Screw Hook Brass.244 x 4-7/ 32240 Screw Hook Brass.207 x 4-/8 32242 Screw Hook Brass.92 x 3-5/8 32244 Screw Hook Brass.2 x 3-3/8 3224 Screw Hook Brass.2 x 2-9/ 32248 Screw Hook Brass.35 x 2-/ 32254 Heavy Duty Screw Hook 3/8 x 0 32253 Heavy Duty Screw Hook 3/8 x 8 32808 Heavy Duty Screw Hook 3/8 x 4-7/8 8588 Heavy Duty Screw Hook 3/8 x 4-/2 3280 Heavy Duty Screw Hook 5/ x 4-/2 32804 Heavy Duty Screw Hook /4 x 4-/4 99450 Panel 2 Screw Hooks Large Brass Lag Thread Screw Eyes & Ceiling Hooks Panel 5 99453 Total SKUs: 9 Part # Description 320954 Brass Large Scr Eye.92 x -5/ 320952 Brass Large Scr Eye.225 x 2-3/ 320950 Brass Large Scr Eye.307 x 2-7/8 3280 Lag Thread Scr Eye Brass Ptd/4 x 3-3/4 3282 Lag Thread Scr Eye Brass Ptd /4 x 5 3284 Lag Thread Scr Eye Brass Ptd 5/ x 4 328 Lag Thread Scr Eye Brass Ptd 5/ x 3288 Lag Thread Scr Eye Brass Pltd 3/8 x 4-/2 3290 Lag Thread Scr Eye Brass Pltd 3/8 x 8 32248 Screw Hook Brass.35 x 2-/ 3224 Screw Hook Brass.2 x 2-9/ 32244 Screw Hook Brass.2 x 3-3/8 32242 Screw Hook Brass.92 x 3-5/8 32238 Screw Hook Brass.244 x 4-7/ 32222 S Hook Zinc.272 x 2-3/4 32224 S Hook Zinc.307 x 3 32238 S Hook Brass Plated.250 x 2-/4 32240 S Hook Brass Plated.272 x 2-3/4 32242 S Hook Brass Plated.307 x 3 99453 Panel 5 Brass Lag Eyes & Hooks Eye Bolts with Hex Nuts EXTRA LARGE A Panel 0 99458 Total SKUs: 3 Panels 0,, 2 and 3 should be merchandised together. Part # Description 320700 Eye Bolt w/ Nut Zinc 0-24 x -/2 320702 Eye Bolt w/ Nut Zinc 0-24 x 2 320704 Eye Bolt w/ Nut Zinc 0-24 x 2-/2 32070 Eye Bolt w/ Nut Zinc /4-20 x 2 320708 Eye Bolt w/ Nut Zinc /4-20 x 2-/2 32070 Eye Bolt w/ Nut Zinc /4-20 x 3 32078 Eye Bolt w/ Nut Zinc /4-20 x 8 320728 Eye Bolt w/ Nut Zinc 5/-8 x 5 320730 Eye Bolt w/ Nut Zinc 5/-8 x 320732 Eye Bolt w/ Nut Zinc 5/-8 x 8 320738 Eye Bolt w/ Nut Zinc 3/8- x 5 320740 Eye Bolt w/ Nut Zinc 3/8- x 320742 Eye Bolt w/ Nut Zinc 3/8- x 8 99458 Panel 0 Eye Bolts Extra Large A Lag Thread Screw Eyes LARGE Panel 4 99452 Total SKUs: Part # Description 32098 Large Scr Eye Zinc.23 x 2-7/8 3209 Large Scr Eye Zinc.307 x 2-7/8 32094 Large Scr Eye Zinc.33 x 3-7/8 3240 Lag Thread Scr Eye Zinc /4 x 3 3242 Lag Thread Scr Eye Zinc /4 x 3-3/4 3245 Lag Thread Scr Eye Zinc /4 x 5 3248 Lag Thread Scr Eye Zinc 5/ x 4 3250 Lag Thread Scr Eye Zinc 5/ x 5 3254 Lag Thread Scr Eye Zinc 5/ x 3255 Lag Thread Scr Eye Zinc 3/8 x 4-/2 325 Lag Thread Scr Eye Zinc 3/8 x 5-/2 3258 Lag Thread Scr Eye Zinc 3/8 x 320 Lag Thread Scr Eye Zinc 3/8 x 8 322 Lag Thread Scr Eye Zinc 7/ x 5-/4 324 Lag Thread Scr Eye Zinc /2 x 5-/2 32 Lag Thread Scr Eye Zinc /2 x 8 99452 Panel 4 Lag Thread Scr Eye Large Stainless Steel Eye Bolts & Hooks Panel 45 99493 Total SKUs: 20 Part # Description 85882 SS Eye Bolt w/ Nut 3/ x -/2 320754 SS Eye Bolt w/ Nut 3/ x 2 32075 SS Eye Bolt w/ Nut /4-20 x 2 320758 SS Eye Bolt w/ Nut /4-20 x 2-5/8 32070 SS Eye Bolt w/ Nut /4-20 x 3 32072 SS Eye Bolt w/ Nut /4-20 x 4 32074 SS Eye Bolt w/ Nut 5/-8 x 3-/4 3207 SS Eye Bolt w/ Nut 5/-8 x 4 85883 SS Eye Bolt w/ Nut 5/-8 x 5 32078 SS Eye Bolt w/ Nut 3/8- x 3-7/8 85884 SS Eye Bolt w/ Nut 3/8- x 5 320770 SS Eye Bolt w/ Nut 3/8- x 320772 SS Eye Bolt w/ Nut 3/8- x 8 328 SS Lag Thread Scr Eye /4 x 3-3/4 3270 SS Lag Thread Scr Eye /4 x 5 3272 SS Lag Thread Scr Eye 5/ x 4 3274 SS Lag Thread Scr Eye 3/8 x 4-/2 85879 SS Heavy Duty Scr Hook /4 x 4-/4 85880 SS Heavy Duty Scr Hook 3/8 x 4-7/8 85244 SS Clothes Hook 5/ x 5 99493 Panel 45 SS Eye Bolts & Hooks Eye Bolts with Hex Nuts EXTRA LARGE B Panel 99459 Total SKUs: 7 Panels 0,, 2 and 3 should be merchandised together. Part # Description 32072 Eye Bolt w/ Nut Zinc /4-20 x 4 32074 Eye Bolt w/ Nut Zinc /4-20 x 5 3207 Eye Bolt w/ Nut Zinc /4-20 x 320722 Eye Bolt w/ Nut Zinc 5/-8 x 3-/4 320724 Eye Bolt w/ Nut Zinc 5/-8 x 4 320734 Eye Bolt w/ Nut Zinc 3/8- x 2-/2 32073 Eye Bolt w/ Nut Zinc 3/8- x 4 99459 Panel Eye Bolts Extra Large B.800.28.4000 www.hpaulin.com 247

Eye Bolts with Hex Nuts EXTRA LARGE C Panel 2 9940 Total SKUs: 7 Panels 0,, 2 and 3 should be merchandised together. Part # Description 320748 Eye Bolt w/ Nut Zinc /2-3 x 8 320750 Eye Bolt w/ Nut Zinc /2-3 x 0 320752 Eye Bolt w/ Nut Zinc /2-3 x 2 320774 Eye Bolt w/ Nut Zinc 5/8- x 3279 Clothes Hook Bolt Zinc 5/-8 x 32798 Clothes Hook Bolt Zinc 3/8- x 7-/4 32800 Clothes Hook Bolt Zinc 3/8- x 8-/4 9940 Panel 2 Eye Bolts Extra Large C Eye Bolts with Hex Nuts EXTRA LARGE D Panel 3 994 Total SKUs: Panels 0,, 2 and 3 should be merchandised together Part # Description 320744 Eye Bolt w/ Nut Zinc /2-3 x 4 32074 Eye Bolt w/ Nut Zinc /2-3 x 320775 Eye Bolt w/ Nut Zinc 5/8- x 8 32077 Eye Bolt w/ Nut Zinc 5/8- x 0 320777 Eye Bolt w/ Nut Zinc 5/8- x 2 320778 Eye Bolt w/ Nut Zinc 5/8- x 4 994 Panel 3 Eye Bolts Extra Large D Forged Steel Eye Bolts Plain Galvanized Panel 4 9942 Total SKUs: 9 Part # Description 320800 Frgd/Galv Eye Bolt w/ Nut /4-20 x 3-/8 320802 Frgd/Galv Eye Bolt w/ Nut /4-20 x 5 320804 Frgd/Galv Eye Bolt w/ Nut 5/-8 x 3-5/8 32080 Frgd/Galv Eye Bolt w/ Nut 5/-8 x 5-/2 320808 Frgd/Galv Eye Bolt w/ Nut 3/8- x 4 32080 Frgd/Galv Eye Bolt w/ Nut 3/8- x 32082 Frgd/Galv Eye Bolt w/ Nut /2-3 x 8 32084 Frgd/Galv Eye Bolt w/ Nut /2-3 x 0 3208 Frgd/Galv Eye Bolt w/ Nut /2-3 x 2 9942 Panel 4 Forged Eye Bolts Plain Forged Steel Eye Bolts w/shoulder Galvanized Panel 5 9943 Total SKUs: Part # Description 85885 Frgd/Galv Eye Bolt w/ Shoulder /4 x 2 8588 Frgd/Galv Eye Bolt w/ Shoulder /4 x 4 85887 Frgd/Galv Eye Bolt w/ Shoulder 5/ x 2-/4 85888 Frgd/Galv Eye Bolt w/ Shoulder 5/ x 4-/4 85889 Frgd/Galv Eye Bolt w/ Shoulder 3/8 x 2-/2 85890 Frgd/Galv Eye Bolt w/ Shoulder 3/8 x 4-/2 8589 Frgd/Galv Eye Bolt w/ Shoulder 3/8 x 85892 Frgd/Galv Eye Bolt w/ Shoulder /2 x 3-/4 85893 Frgd/Galv Eye Bolt w/ Shoulder /2 x 85894 Frgd/Galv Eye Bolt w/ Shoulder /2 x 8 85895 Frgd/Galv Eye Bolt w/ Shoulder /2 x 0 9943 Panel 5 Forged Eye Bolts w/ Shoulder Forged Steel Lifting Eyes Panel 9944 Total SKUs: 2 Part # Description 32000 Forged Lifting Eye Bolt Shldr /4-20 3200 Forged Lifting Eye Bolt Plain /4-20 32002 Forged Lifting Eye Bolt Shldr 5/-8 32003 Forged Lifting Eye Bolt Plain 5/-8 32004 Forged Lifting Eye Bolt Shldr 3/8-32005 Forged Lifting Eye Bolt Plain 3/8-32008 Forged Lifting Eye Bolt Shldr /2-3 32009 Forged Lifting Eye Bolt Plain /2-3 3200 Forged Lifting Eye Bolt Shldr 5/8-320 Forged Lifting Eye Bolt Plain 5/8-3202 Forged Lifting Eye Bolt Shldr 3/4-0 3203 Forged Lifting Eye Bolt Plain 3/4-0 9944 Panel Forged Lifting Eyes Clothesline Hook & J-Bolts Panel 7 9945 Total SKUs: 5 Part # Description 32780 J-Bolt w/ Nut Zinc 3/(0-24) x -7/8 32782 J-Bolt w/ Nut Zinc 7/32(2-24) x 2-/8 32784 J-Bolt w/ Nut Zinc /4-20 x 2-5/ 8589 J-Bolt w/ Nut Zinc /4-20 x 4 85897 J-Bolt w/ Nut Zinc /4-20 x 3278 J-Bolt w/ Nut Zinc 5/-8 x 3 85898 J-Bolt w/ Nut Zinc 5/ x 5 85899 J-Bolt w/ Nut Zinc 5/ x 7 32788 J-Bolt w/ Nut Zinc 3/8- x 3-3/4 32790 J-Bolt w/ Nut Zinc 3/8- x 5 32792 J-Bolt w/ Nut Zinc 3/8- x 7 32794 J-Bolt w/ Nut Zinc /2-3 x 3279 Clothes Hook Bolt Zinc 5/-8 x 32798 Clothes Hook Bolt Zinc 3/8- x 7-/4 32800 Clothes Hook Bolt Zinc 3/8- x 8-/4 9945 Panel 7 Clothesline Hook & J Bolts 248 H. Paulin & Co., a division of The Hillman Group Canada ULC

U-Bolts LARGE A Panel 9 9947 Total SKUs: 2 Panels 9 and 20 can be merchandised together. Panel 9 can stand alone as well. Part # Description 320840 U-Bolt Zinc /4-20 x 2-3/4 x 3/4 320842 U-Bolt Zinc /4-20 x 2-/4 x -/8 320844 U-Bolt Zinc /4-20 x 3-/2 x -/8 32084 U-Bolt Zinc /4-20 x 2 3/4 x -3/8 320848 U-Bolt Zinc 5/-8 x 2-/2 x -3/8 320850 U-Bolt Zinc 5/-8 x 3-3/4 x -3/8 320852 U-Bolt Zinc 5/-8 x 3 x -3/4 320854 U-Bolt Zinc 5/-8 x 4-/4 x -3/4 32085 U-Bolt Zinc 5/-8 x 3 x 2 320858 U-Bolt Zinc 5/-8 x 4-3/ x 2 32082 U-Bolt Zinc 5/-8 x 5 x 2-/2 320870 U-Bolt Zinc 3/8- x 4-3/4 x 3-/2 9947 Panel 9 U-Bolts Large A U-Bolts LARGE B Panel 20 9948 Total SKUs: 0 Panels 9 and 20 can be merchandised together. Part # Description 320828 U-Bolt Zinc /4-20 x -3/8 x 9/ 320830 U-Bolt Zinc /4-20 x -/2 x 3/4 320832 U-Bolt Zinc /4-20 x -3/4 x 320834 U-Bolt Zinc /4-20 x 2-3/4 x -3/4 32083 U-Bolt Zinc /4-20 x 3-/2 x 2 320838 U-Bolt Zinc /4-20 x 4 x 3/4 32080 U-Bolt Zinc 5/-8 x 3-/2 x 2-/2 32084 U-Bolt Zinc 3/8- x 3-/8 x 2 3208 U-Bolt Zinc 3/8- x 3-5/8 x 2-/2 32088 U-Bolt Zinc 3/8-x4-/8 x 3 9948 Panel 20 U-Bolts Large B Square U-Bolts Panel 2 9949 Total SKUs: 9 Part # Description 320892 Square U-Bolt Zinc 5/-8 x 3 x 2 320894 Square U-Bolt Zinc 5/-8 x 5 x 2 32089 Square U-Bolt Zinc 3/8- x 7 x 3 320898 Square U-Bolt Zinc 3/8- x 3 x 4 320900 Square U-Bolt Zinc 3/8- x 5 x 4 320902 Square U-Bolt Zinc 3/8- x x 4 320904 Square U-Bolt Plate Zinc for 2 Width 32090 Square U-Bolt Plate Zinc for 3 Width 320908 Square U-Bolt Plate Zinc for 4 Width 9949 Panel 2 Square U-Bolts Stainless Steel U-Bolts & Plates Panel 4 99494 Total SKUs: Part # Description 320872 SS U-Bolt /4-20 x -3/4 x 320874 SS U-Bolt /4-20 x 2 x -/8 32087 SS U-Bolt /4-20 x 3-/2 x 2 320878 SS U-Bolt 5/-8 x 2-/2 x -3/8 320880 SS U-Bolt 5/-8 x 3 x -3/4 320882 SS U-Bolt 5/-8 x 3-/2 x 2-/2 852444 SS U-Bolt 5/-8 x 4-/2 x 2 320884 SS U-Bolt Plate for & -/8 32088 SS U-Bolt Plate for -/2 320888 SS U-Bolt Plate for -3/4 & 2 320890 SS U-Bolt Plate for 2-/2 99494 Panel 4 SS U-Bolts & Plates Lumber Sized Square U-Bolts Panel 22 99470 Total SKUs: 4 Part # Description 320909 Lumber Sized Sq U-Bolt 3/8-x4x3.3 32090 Lumber Sized Sq U-Bolt 3/8-x5x3.3 3209 Lumber Sized Sq U-Bolt 3/8-xx3.3 32092 Lumber Sized Sq U-Bolt 3/8-x7x3.3 99470 Panel 22 Lumber Sized U-Bolts Hook & Hook Turnbuckles Panel 23 9947 Total SKUs: 8 Part # Description 3294 H&H Turnbuckle Zinc 5/32(8-32) x -/4 329 H&H Turnbuckle Zinc 3/(0-24) x -5/8 3298 H&H Turnbuckle Zinc 7/32(2-24) x -7/8 32920 H&H Turnbuckle Zinc /4-20 x 2-/8 32922 H&H Turnbuckle Zinc 5/-8 x 2-5/8 32924 H&H Turnbuckle Zinc 3/8- x 3-/8 3292 H&H Turnbuckle Zinc 3/8- x 32928 H&H Turnbuckle Zinc /2-3 x 9947 Panel 23 Hook & Hook Turnbuckles.800.28.4000 www.hpaulin.com 249

Eye & Eye Turnbuckles Panel 24 99472 Total SKUs: 8 Part # Description 32840 E&E Turnbuckle Zinc 5/32(8-32) x -/4 32842 E&E Turnbuckle Zinc 3/(0-24) x -5/8 32844 E&E Turnbuckle Zinc 7/32(2-24) x -7/8 3284 E&E Turnbuckle Zinc /4-20 x 2-/8 32848 E&E Turnbuckle Zinc 5/-8 x 2-5/8 32850 E&E Turnbuckle Zinc 3/8- x 3-/8 32852 E&E Turnbuckle Zinc 3/8- x 32854 E&E Turnbuckle Zinc /2-3 x 99472 Panel 24 Eye & Eye Turnbuckles Hook & Eye Turnbuckles Panel 25 99473 Total SKUs: 8 Part # Description 3287 H&E Turnbuckle Zinc 5/32(8-32) x -/4 32878 H&E Turnbuckle Zinc 3/(0-24) x -5/8 32880 H&E Turnbuckle Zinc 7/32(2-24) x -7/8 32882 H&E Turnbuckle Zinc /4-20 x 2-/8 32884 H&E Turnbuckle Zinc 5/-8 x 2-5/8 3288 H&E Turnbuckle Zinc 3/8- x 3-/8 32888 H&E Turnbuckle Zinc 3/8- x 32890 H&E Turnbuckle Zinc /2-3 x 99473 Panel 25 Hook & Eye Turnbuckles Turnbuckles Combination Panel 2 99474 Total SKUs: 0 Part # Description 32842 E&E Turnbuckle Zinc 3/(0-24) x -5/8 32844 E&E Turnbuckle Zinc 7/32(2-24) x -7/8 3284 E&E Turnbuckle Zinc /4-20 x 2-/8 32848 E&E Turnbuckle Zinc 5/-8 x 2-5/8 32850 E&E Turnbuckle Zinc 3/8- x 3-/8 32878 H&E Turnbuckle Zinc 3/(0-24) x -5/8 32880 H&E Turnbuckle Zinc 7/32(2-24) x -7/8 32882 H&E Turnbuckle Zinc /4-20 x 2-/8 32884 H&E Turnbuckle Zinc 5/-8 x 2-5/8 3288 H&E Turnbuckle Zinc 3/8- x 3-/8 99474 Panel 2 E&E and H&E Turnbuckles Forged Steel Hook & Eye Turnbuckles Galvanized Panel 27 99475 Total SKUs: 4 Part # Description 32898 Frgd/Galv H&E Turnbuckle 3/8- x 32900 Frgd/Galv H&E Turnbuckle /2-3 x 32902 Frgd/Galv H&E Turnbuckle /2-3 x 9 32904 Frgd/Galv H&E Turnbuckle 5/8- x 99475 Panel 27 Forged H&E Turnbuckles Forged Steel Eye & Eye Turnbuckles Galvanized Panel 28 9947 Total SKUs: 4 Part # Description 3280 Frgd/Galv E&E Turnbuckle 3/8- x 3282 Frgd/Galv E&E Turnbuckle /2-3 x 3284 Frgd/Galv E&E Turnbuckle /2-3 x 9 328 Frgd/Galv E&E Turnbuckle 5/8-x 9947 Panel 28 Forged E&E Turnbuckles Stainless Steel Turnbuckles, Screw Eyes & S-Hooks Panel 47 99495 Total SKUs: 3 Part # Description 320982 SS Large Screw Eye 0 x 2-7/8 320984 SS Large Screw Eye 4 x 2-3/ 32098 SS Large Screw Eye.2 x -5/8 3285 SS E&E Turnbuckle 0-24 x -5/8 32858 SS E&E Turnbuckle /4-20 x 2-/8 32892 SS H&E Turnbuckle 0-24 x -5/8 32894 SS H&E Turnbuckle /4-20 x 2-/8 3289 SS H&E Turnbuckle 3/8- x 3 32244 SS S-Hook.77 x -/2 3224 SS S-Hook.250 x 2 32248 SS S-Hook.307 x 2-/2 85845 SS Large Screw Eye.23 x 2-5/8 85878 SS S-Hook.307 x 3 99495 Panel 47 SS Turnbuckles-Scr Eyes-S Hooks 250 H. Paulin & Co., a division of The Hillman Group Canada ULC

Wire Rope Clips & Thimbles LARGE Panel 30 99478 Total SKUs: 7 Part # Description 852504 Wire Rope Clip Malleable/Zinc / 32730 Wire Rope Clip Malleable/Zinc /8 32732 Wire Rope Clip Malleable/Zinc 3/ 32734 Wire Rope Clip Malleable/Zinc /4 3273 Wire Rope Clip Malleable/Zinc 5/ 32738 Wire Rope Clip Malleable/Zinc 3/8 32742 Wire Rope Clip Malleable/Zinc /2 32744 Wire Rope Clip Malleable/Zinc 5/8 3274 Wire Rope Clip Malleable/Zinc 3/4 322200 Wire Rope Thimble Steel/Zinc /8 322204 Wire Rope Thimble Steel/Zinc 3/ 32220 Wire Rope Thimble Steel/Zinc /4 322208 Wire Rope Thimble Steel/Zinc 5/ 32220 Wire Rope Thimble Steel/Zinc 3/8 32222 Wire Rope Thimble Steel/Zinc /2 32224 Wire Rope Thimble Steel/Zinc 5/8 3222 Wire Rope Thimble Steel/Zinc 3/4 99478 Panel 30 Wire Rope Clips Large Welded Rings & Dees Panel 3 99479 Total SKUs: 7 Part # Description 329 Welded Ring Steel/Brass 7GA.x3/4 3298 Welded Ring Steel/Brass 7GA.x 32700 Welded Ring Steel/Brass 7GA.x-/4 32702 Welded Ring Steel/Brass 3GA.x-/2 32704 Welded Ring Steel/Brass 2GA.x2 3270 Welded Ring Steel/Brass 2GA.x2-/2 32708 Welded Ring Steel/Nickel 7GA.x3/4 3270 Welded Ring Steel/Nickel 7GA.x 3272 Welded Ring Steel/Nickel 4GA.x-/4 3274 Welded Ring Steel/Nickel 4GA.x-/2 327 Welded Ring Steel/Nickel 2GA.x2 3278 Welded Ring Steel/Nickel 2GA.x2-/2 32720 Welded Ring Steel/Nickel GA.x3 32722 Welded Dee Steel/Nickel 7/8 32724 Welded Dee Steel/Nickel 3272 Welded Dee Steel/Nickel -/4 32728 Welded Dee Steel/Nickel -/2 99479 Panel 3 Welded Rings & Dees Bolt Snaps & Swivels Panel 32 99480 Total SKUs: 20 Part # Description 32420 Swivel Bolt Snap 3/8 32422 Swivel Bolt Snap /2 32424 Swivel Bolt Snap 5/8 3242 Swivel Bolt Snap 3/4 32428 Swivel Bolt Snap 32430 Swivel Bolt Snap -3/ 32432 Double End Bolt Snap 3-/2 32434 Double End Bolt Snap 4 3243 Double End Bolt Snap 4-3/4 32438 Strap Rigid Bolt Snap 32440 Strap Swivel Bolt Snap 32442 Rigid Bolt Snap 5/8 3244 Swivel Trigger Snap /2 32448 Swivel Trigger Snap 3/4 32522 Open Rigid Bolt Snap 3/8 32524 Open Rigid Bolt Snap /2 32538 Double Open Eye Swivel 32540 Double Round Eye Swivel 5/8 32542 Double Strap Eye Swivel 32544 Double Round Eye Swivel 3/4 99480 Panel 32 Bolt Snaps & Swivels Spring & Animal Snaps Panel 33 9948 Total SKUs: 22 Part # Description 32444 Swivel Quick Snap 3/4 32450 Strap Swivel Spring Snap 5/8 32452 Strap Swivel Spring Snap 3/4 32454 Swivel Spring Snap /4 3245 Swivel Spring Snap 3/8 32458 Swivel Spring Snap /2 3240 Swivel Spring Snap 3/4 3242 Chain Snap & 2 3244 Chain Snap /0 & 2/0 324 Open Swivel Spring Snap 3/8 3248 Strap Rigid Spring Snap 3/4 32470 Strap Rigid Spring Snap 32474 Rope Snap 3/4 3247 Swivel Cap Snap 3/4 32478 Swivel Cap Snap 32480 Double End Cap Snap 3-7/8 32482 Round Rigid Snap Hook 5/8 32528 Swivel Animal Snap 7/8 32530 Swivel Animal Snap 32534 Breeching Snap 2-/2 3253 Bit Snap -5/8 9948 Panel 33 Spring & Animal Snaps.800.28.4000 www.hpaulin.com 25

Brass Snaps Panel 34 99482 Total SKUs: 2 Part # Description 32484 Brass Swivel Bolt Snap 3/8 3248 Brass Swivel Bolt Snap /2 32490 Brass Swivel Bolt Snap 3/4 32492 Brass Swivel Bolt Snap 32494 Brass Swivel Bolt Snap -/4 3249 Brass Open Rigid Bolt Snap 3/8 32498 Brass Double Bolt Snap 3-3/8 32500 Brass Double Bolt Snap 4-/2 32502 Brass Rigid Quick Snap 3/8 32504 Brass Rigid Quick Snap 5/8 3250 Brass Rigid Quick Snap / 32508 Brass Rigid Quick Snap 3/4 3250 Brass Swivel Quick Snap 5/8 3252 Brass Swivel Quick Snap / 3254 Brass Swivel Quick Snap 3/4 325 Brass Trigger Snap /2 852474 Brass Round Swivel Bolt Snap 3/ 85247 Brass Strap Swivel Bolt Snap /2 852478 Brass Strap Swivel Bolt Snap 852479 Brass Double Bolt Snap 4-/8 852480 Brass Strap Swivel Trigger Snap 5/8 99482 Panel 34 Solid Brass Snaps Awning Pulleys Panel 35 99483 Total SKUs: Part # Description 32570 Swivel Eye Single /2 32572 Swivel Eye Single 3/4 32574 Swivel Eye Single 3257 Swivel Eye Single -/2 32578 Swivel Eye Single 2 32580 Rigid Eye Single /2 32582 Rigid Eye Single 3/4 32584 Rigid Eye Single 3258 Rigid Eye Single -/2 32588 Rigid Eye Single 2 32592 Rigid Eye Double 3/4 32594 Rigid Eye Double 3259 Rigid Eye Double -/2 32598 Swivel Eye Double 3/4 3200 Swivel Eye Double 3202 Swivel Eye Double -/2 99483 Panel 35 Awning Pulleys Heavy Duty Pulleys Panel 3 99484 Total SKUs: Part # Description 852488 Heavy Duty Swivel Single Pulley -/2 852489 Heavy Duty Swivel Single Pulley 2 852490 Heavy Duty Swivel Single Pulley 3 85249 Heavy Duty Rigid Single Pulley -/2 852492 Heavy Duty Rigid Single Pulley 2 852493 Heavy Duty Rigid Single Pulley 3 852494 Heavy Duty Rigid Double Pulley -/2 852497 Wall Ceiling Mount Pulley -/2 852499 Heavy Duty Pulley Block & Tackle Set 8527 Heavy Duty Swivel Single Pulley 2-/2 85277 Heavy Duty Rigid Single Pulley 2-/2 99484 Panel 3 Heavy Duty Pulleys Forged Steel Eye Type Chain Hooks Panel 37 99485 Total SKUs: 8 Part # Description 32970 Frgd/Zinc Eye Type Grab Hook /4 32972 Frgd/Zinc Eye Type Grab Hook 5/ 32974 Frgd/Zinc Eye Type Grab Hook 3/8 3297 Frgd/Zinc Eye Type Grab Hook /2 32978 Frgd/Zinc Eye Type Slip Hook /4 32980 Frgd/Zinc Eye Type Slip Hook 5/ 32982 Frgd/Zinc Eye Type Slip Hook 3/8 32984 Frgd/Zinc Eye Type Slip Hook /2 99485 Panel 37 Forged Eye Chain Hooks Forged Steel Clevis Type Chain Hooks Panel 38 9948 Total SKUs: 8 Part # Description 3298 Frgd/Zinc Clevis Type Grab Hook /4 32988 Frgd/Zinc Clevis Type Grab Hook 5/ 32990 Frgd/Zinc Clevis Type Grab Hook 3/8 32994 Frgd/Zinc Clevis Type Grab Hook /2 32998 Frgd/Zinc Clevis Type Slip Hook /4 322000 Frgd/Zinc Clevis Type Slip Hook 5/ 322002 Frgd/Zinc Clevis Type Slip Hook 3/8 322004 Frgd/Zinc Clevis Type Slip Hook /2 9948 Panel 38 Forged Clevis Chain Hooks Chain Hooks with Latch Panel 39 99487 Total SKUs: 9 Part # Description 32482 Round Eye Rigid Snap Hook 5/8 3294 Scissor Hook Steel/Zinc /2 32200 Forged Hoist Hook Ton 322008 Forged Hoist Hook 3/4 Ton 32200 Forged Hoist Hook -/2 Ton 32202 Forged Hoist Hook 2 Ton 32207 Forged Clevis Slip Hook w/latch /4 32208 Forged Clevis Slip Hook w/latch 5/ 32209 Forged Clevis Slip Hook w/latch 3/8 99487 Panel 39 Chain Hooks w/latches 252 H. Paulin & Co., a division of The Hillman Group Canada ULC

G70 Chain Hooks Panel 40 99488 Total SKUs: 7 Part # Description 322070 G70 Clevis Grab Hook 3/8 32207 G70 Clevis Grab Hook 5/ 322072 G70 Clevis Slip Hook 5/ 322073 G70 Clevis Slip Hook 3/8 322074 G70 Double Clevis Link /4 5/ 322075 G70 Double Clevis Link 3/8 32207 G70 Double Clevis Link /2 99488 Panel 40 Forged G70 Chain Hooks Forged Steel Connection Hardware Galvanized Panel 4 99489 Total SKUs: 9 Part # Description 322028 Frgd/Galv Connecting Link /4 322030 Frgd/Galv Connecting Link 5/ 322032 Frgd/Galv Connecting Link 3/8 32203 Frgd/Galv Connecting Link /2 322038 Frgd/Galv Connecting Link 5/8 322040 Frgd/Galv Dble. Clevis Link /4-5/ 322042 Frgd/Galv Dble. Clevis Link 3/8 322044 Frgd/Galv Dble. Clevis Link 7/-/2 32204 Frgd/Galv Dble. Clevis Link 5/8 322048 Frgd/Galv Anchor Shackle 3/ 322050 Frgd/Galv Anchor Shackle /4 322052 Frgd/Galv Anchor Shackle 5/ 322054 Frgd/Galv Anchor Shackle 3/8 32205 Frgd/Galv Anchor Shackle 7/ 322058 Frgd/Galv Anchor Shackle /2 85245 Frgd/Galv Swivel 3/ 852452 Frgd/Galv Swivel /4 852453 Frgd/Galv Swivel 5/ 852454 Frgd/Galv Swivel 3/8 99489 Panel 4 Forg/Galv Connection Hdwe Links & Cold Shuts Panel 42 99490 Total SKUs: 23 Part # Description 3250 Safety Spring Snap Link /4 3252 Safety Spring Snap Link 5/ 3254 Safety Spring Snap Link 3/8 325 Safety Spring Snap Link 7/ 3258 Safety Spring Snap Link /2 320 Safety Spring Snap Link 5/8 32 Quick Link /8 3270 Quick Link 3/ 3272 Quick Link /4 3274 Quick Link 5/ 327 Quick Link 3/8 3278 Quick Link /2 3280 Quick Link 9/ 3282 Lap Link /8 3284 Lap Link 3/ 328 Lap Link /4 3288 Lap Link 5/ 3290 Lap Link 3/8 32204 Cold Shut 3/-/8 Chain 3220 Cold Shut /4-3/ Chain 32208 Cold Shut 5/-/4 Chain 322020 Cold Shut 3/8-5/ Chain 322022 Cold Shut 7/-3/8 Chain 99490 Panel 42 Chain Links & Cold Shuts Rope Loops, Cleats, Clamps & Hooks Panel 43 9949 Total SKUs: 22 Part # Description 322300 Rope Cleat Brass 2-7/ 322302 Rope Cleat Brass 3-3/4 322304 Rope Cleat Brass 4-3/8 32230 Rope Cleat Brass 5-3/8 322308 Rope Cleat Zinc Die Cast/Nickel 2-/2 32230 Rope Cleat Zinc Die Cast/Nickel 4-/2 32232 Rope Cleat Zinc Die Cast/Nickel 3223 Tarp Rope Hook Steel/Zinc.22 32238 Tarp Rope Hook Steel/Zinc.30 322320 Tarp Rope Hook Steel/Zinc.32 322322 Tarp Rope Hook Steel/Zinc.444 852022 Tarp Rope Hook Knob End 322324 Easy Knot Rope Tie Hook Steel/Zinc 852023 Strap Loop Nickel Plated 85272 Strap Loop Nickel Plated -/4 85273 Strap Loop Nickel Plated -/2 852024 Strap Loop Nickel Plated 2 852025 Rope Loop Nickel Plated /2 32234 Rope Tie Strap Steel/Zinc 3/8x2-/4 852485 Rope Clamp.25-.37 85248 Rope Clamp.37-.50 852487 Brass Rope Clamp.43-.50 9949 Panel 43 Rope Clts-Clamps-Hks-Loops.800.28.4000 www.hpaulin.com 253

Rope Accessories Panel 44 99492 Total SKUs: 0 Part # Description 32232 Clothesline Hook Plate Style 322328 Rope Binding Hook Locking 322330 Rope Binding Hook Snap Back 322332 Hammock Hook Plate Style 322334 Hammock Hook Lag Style 32233 Hitching Ring Plate Style 322338 Hitching Ring Machine Style 4" 322340 Hitching Ring Machine Style " 322342 Hitching Ring Lag Style 2"I.D. 322344 Hitching Ring Lag Style 3"I.D. 99492 Panel 44 Rope Accessories Stainless Steel Links & Snaps Panel 48 9949 Total SKUs: 4 Part # Description 85202 Stainless Steel Snap Link 5/ 852027 Stainless Steel Snap Link 7/ 852028 Stainless Steel Snap Link 5/8 852029 Stainless Steel Snap Link 3/4 852030 Stainless Steel Quick Link /8 85203 Stainless Steel Quick Link 3/ 852032 Stainless Steel Quick Link /4 852033 Stainless Steel Quick Link 5/ 852034 Stainless Steel Quick Link 3/8 85245 SS Swivel Bolt Snap /2 8524 SS Swivel Bolt Snap 3/4 85247 SS Double Bolt Snap 4 85249 SS Rigid Quick Snap 3/4 852473 SS Rigid Spring Hook -/8 9949 Panel 48 SS Links & Snaps Snaps SMALL Panel 49 99497 Total SKUs: 20 Part # Description 32420 Swivel Bolt Snap 3/8 32422 Swivel Bolt Snap /2 32424 Swivel Bolt Snap 5/8 3242 Swivel Bolt Snap 3/4 32430 Swivel Bolt Snap -3/ 32432 Double End Bolt Snap 3-/2 32434 Double End Bolt Snap 4 3243 Double End Bolt Snap 4-3/4 32440 Strap Swivel Bolt Snap 32442 Rigid Bolt Snap 5/8 32444 Swivel Quick Snap 3/4 3244 Swivel Trigger Snap /2 32448 Swivel Trigger Snap 3/4 32454 Round Swivel Spring Snap /4 3248 Strap Rigid Spring Snap 3/4 32478 Swivel Cap Snap 32528 Swivel Animal Snap 7/8 32530 Swivel Animal Snap 32534 Breeching Snap 2-/2 3253 Bit Snap -5/8 99497 Panel 49 Snaps Combination Lock Pins Square, Round & Spring Panel 59 9950 Total SKUs: 2 Part # Description 883838 /4 x -3/4 Round Lock Pin 88293 /4 x 2 Round Lock Pin 883839 5/ x -3/4 Round Lock Pin 88294 5/ x 2-3/4 Round Lock Pin 883840 3/8 x -3/4 Round Lock Pin 88295 5/ x 2-3/4 Square 8829 3/8 x 2-/2 Square Lock Pin 88297 3/8 x 2-3/4 Square Lock Pin 974 /4 x 2-/8 Spring Lock Pin 973 5/ x 2-/4 Spring Lock Pin 972 3/8 x 2-3/8 Spring Lock Pin 97 /2 x 4-/2 Spring Lock Pin 970 5/8 x 4-/8 Spring Lock Pin 8828 3/" Linch Pin - Zinc & Yellow 8829 /4" Linch Pin - Zinc & Yellow 8830 5/" Linch Pin - Zinc & Yellow 883 7/" Linch Pin - Zinc & Yellow 883507 7/" 5pk Linch Pin - Zinc & Yellow 883508 7/" 0pk Linch Pin - Zinc & Yellow 883509 7/" Heavy Duty Linch Pin - Zinc & Yellow 88350 7/" w/chain Linch Pin - Zinc & Yellow 9950 Panel 59 - Lock Pins Sq, Rd, Spring Hitch Pins Zinc & Yellow Part Panel 55 99502 Total SKUs: Part # Description 8833 Hitch Pin - Zinc & Yellow /2 x 4 9705 Hitch Pin - Zinc & Yellow 5/8 x 8834 Hitch Pin - Zinc & Yellow 5/8 x -/4 970 Hitch Pin - Zinc & Yellow 3/4 x 4-/4 8835 Hitch Pin - Zinc & Yellow 3/4 x -/4 9707 Hitch Pin - Zinc & Yellow 3/4 x -/4 99502 Panel 55 Hitch Pins Z & Y Hitch Pins Zinc & Yellow Part 2 Panel 5 99503 Total SKUs: 7 Part # Description 9708 Hitch Pin-Z & Y 7/8x-/4 9709 Hitch Pin-Z & Y x-3/4 88384 Hitch Pin-Z & Y 3/8x4 Bent w/clip 883842 Hitch Pin-Z & Y /2x3 Bent w/clip 883843 Hitch Pin-Z & Y /2x4 Bent w/clip 8832 Hitch Pin-Z & Y 5/8x3 Bent w/clip 97099 Hitch Pin-Z & Y 5/8x4 Bent w/clip 99503 Panel 5 Hitch Pins Z & Y Part2 254 H. Paulin & Co., a division of The Hillman Group Canada ULC

Rubber Handled Hitch Pins Part Panel 57 99504 Total SKUs: Part # Description 883 Rubber Handle /2 x 3-5/8 88383 Rubber Handle 5/8 x 4 970 Rubber Handle 3/4 x 4 9702 Rubber Handle 3/4 x -/2 88383 Rubber Handle -/4 x 8-/2 883837 Rubber Handle -/2 x 8-/2 99504 Panel 57 Hitch Pins Rub Handle Rubber Handled Hitch Pins Part 2 Panel 58 99505 Total SKUs: Part # Description 9700 Rubber Handle 5/8 x 5-3/4 883832 Rubber Handle 7/8 x 4-/4 9703 Rubber Handle 7/8 x -/2 883833 Rubber Handle x 4-3/4 883834 Rubber Handle x 7-/2 883835 Rubber Handle -/8 x 8-/2 99505 Panel 58 Hitch Pins Rub Handle Pt 2 Shaft Collars & Machinery Bushings Panel 0 99507 Total SKUs: 33 Part # Description 88355 /8 x /32 x /4 883552 3/ x 7/ x /4 Shaft Collars 8387 /4 x /2 x 9/32 Shaft Collars 883553 5/ x 5/8 x 5/ Shaft Collars 8388 3/8 x 3/4 x 3/8 Shaft Collars 8389 7/ x 7/8 x 7/ Shaft Collars 83820 /2 x x 7/ Shaft Collars 883554 9/ x x 7/ Shaft Collars 8382 5/8 x /8 x /2 Shaft Collars 83822 3/4 x -/4 x 9/ Shaft Collars 883555 7/8 x -/2 x 9/ Shaft Collars 88355 x -5/8 x 5/8 Shaft Collars 883557 /8" Double Split Shaft Collars 883558 3/" Double Split Shaft Collars 883559 /4" Double Split Shaft Collars 88350 5/" Double Split Shaft Collars 8835 3/8" Double Split Shaft Collars 88352 7/" Double Split Shaft Collars 88353 /2" Double Split Shaft Collars 88354 9/" Double Split Shaft Collars 88355 5/8" Double Split Shaft Collars 8835 3/4" Double Split Shaft Collars 88357 7/8" Double Split Shaft Collars 88358 " Double Split Shaft Collars 883574 /2 x 7/8 x 8Ga Machinery Bushings 883575 9/ x x 8Ga Machinery Bushings 88280 5/8 x x 8Ga Machinery Bushings 882394 3/4 x -/4 x 8Ga Machinery Bushings 88239 7/8 x -3/8 x 8Ga Machinery Bushings 882397 x -/2 x 8Ga Machinery Bushings 88357 -/8 x -3/4 x 8Ga Machinery Bushings 883577 -/4 x -7/8 x 8Ga Machinery Bushings 883578-3/8 x 2-/8 x 8Ga Machinery Bushings 99507 Panel 0 Shaft Collars & Mach. Bush Metric Shaft Collars & Hitch Pin Clips Panel 99508 Total SKUs: 35 Part # Description 88393 M Metric Shaft Collars 88394 M8 Metric Shaft Collars 88395 M0 Metric Shaft Collars 8839 M2 Metric Shaft Collars 88397 M4 Metric Shaft Collars 88398 M Metric Shaft Collars 88399 M8 Metric Shaft Collars 883700 M20 Metric Shaft Collars 88370 M25 Metric Shaft Collars 883702 M Metric Double Split Shaft Collars 883703 M8 Metric Double Split Shaft Collars 883704 M0 Metric Double Split Shaft Collars 883705 M2 Metric Double Split Shaft Collars 88370 M4 Metric Double Split Shaft Collars 883707 M Metric Double Split Shaft Collars 883708 M8 Metric Double Split Shaft Collars 883709 M20 Metric Double Split Shaft Collars 88370 M25 Metric Double Split Shaft Collars 88095.02 x -5/ Hitch Pin Clips 8809.093 x -5/8 Hitch Pin Clips 88097.093 x 2-5/ Hitch Pin Clips 882592.093 x 2-/2 Hitch Pin Clips 882593.25 x 2-9/ Hitch Pin Clips 88099.25 x -5/ Hitch Pin Clips 88098.25 x 2-/2 Hitch Pin Clips 8800.48 x 2-5/ Hitch Pin Clips 8802.77 x 3-/4 Hitch Pin Clips 880.77 x 3-3/4 Hitch Pin Clips 882594.243 x 4 Hitch Pin Clips 8822 /4 x -/4 Cotterless Hitch Pins 8823 /4 x -3/4 Cotterless Hitch Pins 8824 /4 x 3 Cotterless Hitch Pins 8825 3/8 x -/8 Cotterless Hitch Pins 882 3/8 x -5/8 Cotterless Hitch Pins 8827 3/8 x 2-/8 Cotterless Hitch Pins 99508 Panel Metric Shaft Col & Hitch Pins.800.28.4000 www.hpaulin.com 255

Blank Black Panel Panel 50 99499 Part # Description 99498 Panel 50 Blank 2" x 2" Blk Panel Blank Grey Panel Panel 5 9950 Part # Description 99499 Panel 5 Blank 2" x 2" Grey Panel NOTES 25 H. Paulin & Co., a division of The Hillman Group Canada ULC

AN INTRODUCTION TO... COMMERCIAL LETTERS, NUMBERS & SIGNS LETTRES, CHIFFRES & AFFICHES COMMERCIAUX UNE INTRODUCTION. For a full listing of Paulin Commercial Letters / Numbers / Signs, please refer to our current catalogue or visit our website to download a PDF version. COMMERCIAL LETTERS, NUMBERS & SIGNS SELF ADHESIVE LETTERS & NUMBERS REUSEABLE STENCILS SIGN PROGRAM SPECIALTY/NOVELTY SIGNS & ACCESSORIES

COMMERCIAL LETTERS, NUMBERS & SIGNS LETTRES, CHIFFRES ET AFFICHES COMMERCIAUX COMMERCIAL OPTIMIZER No. 022-07 The perfect start to a Letters, Numbers and Signs Department. Utilizing just 4 feet of display area, space is Optimized by the use of one 3-sided merchandising tower and a cascading waterfall rack. The assortment offers coverage in fourteen different product categories. 258 H. Paulin & Co., a division of The Hillman Group Canada ULC

COMMERCIAL LETTERS, NUMBERS & SIGNS MERCHANDISER PRÉSENTOIR LETTRES, CHIFFRES ET AFFICHES COMMERCIAUX No. 022-07 Item Number 83950 83952 83954 8395 83958 839570 839572 839574 83957 839578 839580 839582 839584 83958 839588 839590 839592 839594 83959 839598 83900 83902 83904 8390 83908 8390 8392 8394 839 8398 83920 83922 83924 8392 83928 83930 83932 83934 8393 83938 83940 83942 83944 8394 83948 83950 83952 83954 8395 83958 8390 8392 Size Description DIE-CUT BLACK VINYL A DIE-CUT BLACK VINYL B DIE-CUT BLACK VINYL C DIE-CUT BLACK VINYL D DIE-CUT BLACK VINYL E DIE-CUT BLACK VINYL F DIE-CUT BLACK VINYL G DIE-CUT BLACK VINYL H DIE-CUT BLACK VINYL I DIE-CUT BLACK VINYL J DIE-CUT BLACK VINYL K DIE-CUT BLACK VINYL L DIE-CUT BLACK VINYL M DIE-CUT BLACK VINYL N DIE-CUT BLACK VINYL O DIE-CUT BLACK VINYL P DIE-CUT BLACK VINYL Q DIE-CUT BLACK VINYL R DIE-CUT BLACK VINYL S DIE-CUT BLACK VINYL T DIE-CUT BLACK VINYL U DIE-CUT BLACK VINYL V DIE-CUT BLACK VINYL W DIE-CUT BLACK VINYL X DIE-CUT BLACK VINYL Y DIE-CUT BLACK VINYL Z DIE-CUT BLACK VINYL DIE-CUT BLACK VINYL 2 DIE-CUT BLACK VINYL 3 DIE-CUT BLACK VINYL 4 DIE-CUT BLACK VINYL 5 DIE-CUT BLACK VINYL DIE-CUT BLACK VINYL 7 DIE-CUT BLACK VINYL 8 DIE-CUT BLACK VINYL 9 DIE-CUT BLACK VINYL 0 WHITE DIE CUT VINYL A WHITE DIE CUT VINYL B WHITE DIE CUT VINYL C WHITE DIE CUT VINYL D WHITE DIE CUT VINYL E WHITE DIE CUT VINYL F WHITE DIE CUT VINYL G WHITE DIE CUT VINYL H WHITE DIE CUT VINYL I WHITE DIE CUT VINYL J WHITE DIE CUT VINYL K WHITE DIE CUT VINYL L WHITE DIE CUT VINYL M WHITE DIE CUT VINYL N WHITE DIE CUT VINYL O WHITE DIE CUT VINYL P Qty Pkg Per Qty Pack Case Qty 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 Item Number 8394 839 8398 83970 83972 83974 8397 83978 83980 83982 83984 8398 83988 83990 83992 83994 8399 83998 839700 839702 83972 83972 839728 83980 83982 83984 8398 83988 839824 839828 839830 839832 839834 83983 839838 839840 839888 839892 839894 83989 839898 839900 839902 839904 83990 839908 8399 839974 83997 839978 839980 839982 Size 4 2 x 8 2 x 8 2 x 8 2 x 8 2 x 8 2 x 8 2 x 8 2 x 8 2 x 8 2 x 8 2 x 8 2 x 8 2 x 8 8 x 2 8 x 2 8 x 2 8 x 2 8 x 2 8 x 2 8 x 2 8 x 2 8 x 2 8 x 2 8 x 2 8 x 2 8 x 2 8 x 2 8 x 2 8 x 2 Description WHITE DIE CUT VINYL Q WHITE DIE CUT VINYL R WHITE DIE CUT VINYL S WHITE DIE CUT VINYL T WHITE DIE CUT VINYL U WHITE DIE CUT VINYL V WHITE DIE CUT VINYL W WHITE DIE CUT VINYL X WHITE DIE CUT VINYL Y WHITE DIE CUT VINYL Z WHITE DIE CUT VINYL WHITE DIE CUT VINYL 2 WHITE DIE CUT VINYL 3 WHITE DIE CUT VINYL 4 WHITE DIE CUT VINYL 5 WHITE DIE CUT VINYL WHITE DIE CUT VINYL 7 WHITE DIE CUT VINYL 8 WHITE DIE CUT VINYL 9 WHITE DIE CUT VINYL 0 G&B LETR ST-54 PC PKGD STENCILS SET PKGD STENCILS SET MYL-ARROW MYL-ENTRANCE LADIES NICKEL BLACK/BLUE MEN NICKEL BLACK/BLUE MYL-KP DOOR CLSD MYL-PUSH MYL-PULL MYL-BEWARE DOG MYL-EMPLYEE ONLY MYL-EXIT MYL-NO ADMITTNCE MYL-NO SMOKING MYL-NO SOLICITNG PLS-R/B BUSINESS HR PLS-R/B EXIT PLS-R/B HELP WANTED PLS-R/B NO SMOKING PLS-R/B KEEP OUT PLS-R/B NO DUMPING PLS-R/B NO PARKING PLS-R/B NO TRESPASS PLS-R/B PRVT KP OUT PLS-R/B PRIVT PRPRT PLS-R/B OPEN/CLOSED PLS-R/B-DG HARD HAT PLS-R/B-DG RESTRICT PLS-R/B-DG HI VOLTG PLS-B/Y-CN DO NT EN PLS-B/Y-CN EY PRTCT Qty Pkg Per Qty Pack 5 5 5 Case Qty 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 0 30 30 330 330 330 330 330 330 330 330 330 330 330 330 330 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450.800.28.4000 www.hpaulin.com 259

COMMERCIAL LETTERS, NUMBERS & SIGNS MERCHANDISER PRÉSENTOIR LETTRES, CHIFFRES ET AFFICHES COMMERCIAUX No. 022-07 - CONTINUED... Item Number Size Description Pkg Qty Qty Per Pack Case Qty Item Number Size Description Pkg Qty Qty Per Pack Case Qty 839984 83998 839989 84004 8400 840022 840040 840042 84004 84008 840070 840203 840370 840378 840380 840382 840384 840474 84047 840478 840480 840482 840484 84048 840488 840490 840492 840494 84049 840498 840500 840502 840504 84050 840508 84050 84052 84054 8405 84058 840520 840522 840524 84052 840528 840530 840532 840534 84053 840538 840540 840542 8 x 2 8 x 2 8 x 2 8 x 2 8 x 2 8 x 2 5 x 9 5 x 9 5 x 9 4x0 24x2 24x2 24x2 24x2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 -/2 PLS-B/Y-CN HAZ MTRL PLS-R/B-DG PROPANE PLS-B/Y-CN FALL ICE PLS-R/B-NO PARKING PLS-G/W-VIST PRKNG PLS-BU/W-HNDCP PRK PLS-R/B NO TRESPAS PLS-R/B-KEEP OUT PLS-R/B-OPEN/CLOSED DRIVEWY MRKR-BLU DRIVEWY MRKR-RED GID FIRE EX-RHT-ARW TAPE-REFLECT SAFTY STRIP REFL TAPE BLK/YELLW REFL TAPE RED/SILVR REFL TAPE SOL.SLIVR REFL TAPE SOLID RED ALU-A/C-BLK/GLD-#0 ALU-A/C-BLK/GLD-# ALU-A/C-BLK/GLD-#2 ALU-A/C-BLK/GLD-#3 ALU-A/C-BLK/GLD-#4 ALU-A/C-BLK/GLD-#5 ALU-A/C-BLK/GLD-# ALU-A/C-BLK/GLD-#7 ALU-A/C-BLK/GLD-#8 ALU-A/C-BLK/GLD-#9 ALU-A/C-BLK/GLD-A ALU-A/C-BLK/GLD-B ALU-A/C-BLK/GLD-C ALU-A/C-BLK/GLD-D ALU-A/C-BLK/GLD-E ALU-A/C-BLK/GLD-F ALU-A/C-BLK/GLD-G ALU-A/C-BLK/GLD-H ALU-A/C-BLK/GLD-I ALU-A/C-BLK/GLD-J ALU-A/C-BLK/GLD-K ALU-A/C-BLK/GLD-L ALU-A/C-BLK/GLD-M ALU-A/C-BLK/GLD-N ALU-A/C-BLK/GLD-O ALU-A/C-BLK/GLD-P ALU-A/C-BLK/GLD-Q ALU-A/C-BLK/GLD-R ALU-A/C-BLK/GLD-S ALU-A/C-BLK/GLD-T ALU-A/C-BLK/GLD-U ALU-A/C-BLK/GLD-V ALU-A/C-BLK/GLD-W ALU-A/C-BLK/GLD-X ALU-A/C-BLK/GLD-Y 5 5 5 24 24 0 5 5 5 5 450 450 450 0 0 0 20 20 20 24 24 300 44 35 45 45 35 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 840544 84054 840548 840550 840552 840554 84055 840558 84050 84052 84054 8405 84058 840570 84028 84744 84750 84752 8475 84758 8472 8429 84228 842270 842272 842274 84227 842282 842284 843444 843445 84400 8440 8442 84448 84449 84450 8445 847004 84705 84702 847027 84720 84722 848554 84802 84829 84838 848739 848747 84875 84027 -/2 -/2 -/2 -/2 x 9 x 9 x 9 x 9 x 9 x 9 9 x 5 2 2 2 2 4 x 8 x 9 x 9 x 9 x 9 2 2 2 x 8 48 5 x 7 5 x 7 48 ALU-A/C-BLK/GLD-Z ALU-A/C-BLK/GLD-SP ALU-A/C-BLK/GLD-HY ALU-A/C-BLK/GLD-AM ANGLE CUT ALUM. #0 ANGLE CUT ALUM. # ANGLE CUT ALUM. #2 ANGLE CUT ALUM. #3 ANGLE CUT ALUM. #4 ANGLE CUT ALUM. #5 ANGLE CUT ALUM. # ANGLE CUT ALUM. #7 ANGLE CUT ALUM. #8 ANGLE CUT ALUM. #9 SLOW MOVING VECH.SIGN VIS-BLK EMPLOYE ONLY VIS-BLK MEN VIS-BLK NO SMOKING VIS-BLK PRIVATE VIS-BLK RESTROOMS VIS-BLK WOMEN PLS-SPC NO PARKING MYL-B/G-PKGD-LTTRS MYL-B/G-PKGD-NMBRS VNL-B/W-PKGD-LTTRS VNL-B/W-PKGD-NMBRS MYL-B/G-PKGD-NMBRS VNL-B/W-PKGD-LTTRS VNL-B/W-PKGD-NMBRS MYL-RFL-B/S-PKGD-LTTR MYL-RFL-B/S-PKGD-# S REFLCTR-RED-SCRW/ADH REFLCTR-BLU-SCRW/ADH ALU-R/W FIRE XTNGSH SKO MEN ACCESS ADA ADA-BRN MEN/WOMEN ADA-BRN WOMEN PCTGRM ADA-BLU ACCESSBL PIC VNL-D/C-BLK-PKGD-L/# VNL-D/C-BLK-PKGD-L/# STENCILS-OILBD-LTR/# STENCILS-OILBD-LTR/# REFLECTORS-SMALL CARDED VNL-D/C-BLK-PKGD-L/# MYL-B/S-EMRGNCY EXIT WET FLR A-FRME SGN-FRNCH MYL-RFL-B/S-PKGD-L/# REFLCTIVE STAFF-ORG VIS-RED-EXTINCTEUR VIS-RED-NO SMOKING MKR-2SIDE-DRVWY-RED 9 ADDRESS KIT -DOUBLE SIDED 3 3 3 3 3 3 3 3 3 3 3 3 3 3 2 3 24 24 5 500 500 500 500 750 750 750 750 750 750 750 750 750 750 90 92 92 92 92 92 92 0 20 20 20 20 20 20 20 20 20 20 20 240 54 54 54 54 20 20 08 48 44 20 330 3 20 24 50 50 344 20 20 H. Paulin & Co., a division of The Hillman Group Canada ULC

SELF-ADHESIVE LETTERS & NUMBERS REUSABLE STENCILS AUTO-ADHÉSIF LETTRES ET CHIFFRES POCHOIRS RÉUTILISABLES The Hillman Sign Centre offers the convenience of packaged letters and numbers kits. Choose from several sizes in multiple colour combinations. Attractive black and gold angle-cut aluminium and mylar letters and numbers come in three sizes. Reflective Mylar letters and numbers are flexible, exceptionally durable with high tensile and tear strength, and won t fade in high temperatures. FEATURING: Letters & Numbers Square Cut/Die Cut Kits Black on Gold Aluminium Die Cut Vinyl and Thin Styles Reusable Stencils: Letters/Numbers/Combo SIGN PROGRAM PROGRAMME DE SIGNALISATION SELF-ADHESIVE STYRENE CORRUGATED ALUMINIUM The Hillman Sign Center s signs are available in a variety of substrates, sizes and colour combinations. With a range of sign titles to choose from, meeting the specific needs of your customers is easy. All signs are made using ultra-violet, fluorescent ink for maximum visibility. FEATURING: Self-Adhesive Mylar & Flexible Vinyl Signs Self-Adhesive Molded Plastic Signs Styrene Signs: 8 x 2 to 8 x 24 Corrugated Signs: 8 x 2 to 20 x 24 Aluminium Signs: 0 x 4 to 2 x 8 English and French Titles Available.800.28.4000 www.hpaulin.com 2

SPECIALTY / NOVELTY SIGNS & ACCESSORIES AFFICHES ET ACCESSOIRES DE SPÉCIALITÉ The Hillman Sign Center offers a large variety of specialty and novelty signs for every type of customer. Create your own sign with our large selection of blank Create-A-Sign s in different shapes and colours. Safety tape, reflectors and sign frames are also available in a variety of sizes. LED Open sign, Solar Light bar and Glow-In-The-Dark signs add an extra benefit for your customer. FEATURING: Create-A-Sign Program LED Open Sign and LED Solar Light Bar Safety Tape, Flagging Tape & Caution Tape Sign Frames and Reflectors 22 H. Paulin & Co., a division of The Hillman Group Canada ULC

KEYS CLÈS FOR MORE INFORMATION PLEASE CONTACT YOUR SALES REPRESENTATIVE

DON T SEND YOUR CUSTOMERS AWAY TO AUTO DEALERS FOR TRANSPONDER KEYS! Made in minutes! Easy 2 button Operation. No internet required. High Retails with High Margins! Up to 90% Market Coverage of programmable keys. Compatible with any Hillman Key Duplication Platform. EZ CLONE PLUS WHAT IS THE EZ CLONE PLUS SYSTEM? It s the critical 2 nd step to finalizing the duplication of automotive keys with Transponder Technology. The Transponder Key Technology Market is growing. 9 of the top 0 selling vehicles in Canada are equipped with Transponder based security systems. More than 9 million vehicles on Canadian roads are equipped with Transponder Systems. YOUR TRUSTED SOURCE FOR KEY DUPLICATION Three levels of duplication to find the RIGHT solution for YOUR MARKET. GOOD Traditional Technology Low Cost Operation Manual Process BETTER Improved Technology Market Leader in Key Duplication BEST THE NEXT GENERATION New Advanced Machine For Keys Laser Identification System Lowest Miscut Rate In The Industry Touch Screen Technology Maximize Store Profits 3 Easy Steps in Duplicating a Key Built-In Training Video & Application Guides Precision 4 Laser (P4) 24 H. Paulin & Co., a division of The Hillman Group Canada ULC

TECHNICAL TECHNIQUE XYZ 8.8HV MECHANICAL REQUIREMENTS FOR THREADED FASTENERS

MECHANICAL REQUIREMENTS FOR THREADED FASTENERS FIXATIONS FILETÉES POUR APPLICATIONS MÉCANIQUES S.A.E. GRADE (IMPERIAL) 2 I.S.O. CLASS (METRIC) S.A.E & PAPCO IDENT. BOLT SIZE DIAMETER (INCH or MM) INCH /4 to 3/4 Over 3/4 to -/2 PROOF LOAD (PSI) 55,000 33,000 TENSILE STRENGTH MIN (PSI) 74,000 0,000 HARDNESS ROCKWELL VICKERS B80-B00 B70-B00 MATERIAL - HEAT TREATMENT - Low or medium carbon steel; C: 0.5 to 0.55, P: 0.025 Max., S: 0.025 Max. - For studs only, sulfur content may be 0.33% maximum S.A.E. GRADE (IMPERIAL) 5 I.S.O. CLASS (METRIC) S.A.E & PAPCO IDENT. BOLT SIZE DIAMETER (INCH or MM) INCH /4 to Over to -/2 PROOF LOAD (PSI) 85,000 74,000 TENSILE STRENGTH MIN (PSI) 20,00 05,000 HARDNESS ROCKWELL VICKERS C25-C34 C9-C30 MATERIAL - HEAT TREATMENT - Medium carbon steel quenched and tempered C: 0.28 to 0.55, P: 0.025 Max., S: 0.025 Max. Tempering Temperature: Min. 425 C (800 F) - For studs only, sulfur content may be 0.3% maximum - Medium carbon boron or medium carbon alloy steels, as specified for Grade 8 fasteners, may also be used at the manufacturer s option - There shall be a sufficient hardenability to ensure a microstructure consisting of approximately 90% martensite in the core of threaded sections of the fasteners after hardening and quenching and before tempering. - Carbon steel with additives (e.g. Boron or Cr or Mn) quenched and tempered C: 0.5 to 0.40, P: 0.025 Max., S: 0.025 Max., B: 0.0005 to 0.003 Tempering Temperature: Min. 425 C (800 F) - For studs only, sulfur content may be 0.3% maximum. When carbon content in boron steel is less than 0.25% the minimum manganese shall be 0.0% - There shall be a sufficient hardenability to ensure a microstructure consisting of approximately 90% martensite in the core of threaded sections of the fasteners after hardening and quenching and before tempering. S.A.E. GRADE (IMPERIAL) 8 I.S.O. CLASS (METRIC) S.A.E & PAPCO IDENT. BOLT SIZE DIAMETER (INCH or MM) INCH PROOF LOAD (PSI) TENSILE STRENGTH MIN (PSI) /4 to -/2 20,000 50,000 C33-C39 HARDNESS ROCKWELL VICKERS - Medium carbon steel quenched and tempered C: 0.25 to 0.55, P: 0.025 Max., S: 0.025 Max. Tempering Temperature: Min. 425 C (800 F) - For studs only, sulfur content may be 0.3% maximum - There shall be a sufficient hardenability to ensure a microstructure consisting of approximately 90% martensite in the core of threaded sections of the fasteners after hardening and quenching and before tempering. MATERIAL - HEAT TREATMENT - Alloy steel with additives (e.g. Boron or Cr or Mn) quenched and tempered C: 0.20 to 0.55, P: 0.025 Max., S: 0.025 Max. Tempering Temperature: Min. 425 C (800 F) - For studs only, sulfur content may be 0.3% maximum - When carbon content in boron steel is less than 0.25% the minimum manganese shall be 0.70% When boron is added the limits shall be 0.0005% to 0.003% - Alloy steel shall contain at least one of the following elements in the minimum quantity given: Chromium 0.30%, nickel 0.30%, molybdenum 0.20%, vanadium 0.0%, manganese.5%. Where elements are specified in combinations of two, three, four, or five and have alloy contents less than those given above, the limit value to be applied for steel class determination is 70% of sum of the individual limit values shown above for two, three, four or five elements concerned. - There shall be a sufficient hardenability to ensure a microstructure consisting of approximately 90% martensite in the core of threaded sections of the fasteners after hardening and quenching and before tempering. - Medium carbon alloy steel quenched and tempered C: 0.28 to 0.55, P: 0.025 Max., S: 0.025 Max. Tempering Temperature: Min. 425 C (800 F) - When carbon content in boron steel is less than 0.25% the minimum manganese shall be 0.70% - Alloy steel shall contain at least one of the following elements in the minimum quantity given: Chromium 0.30%, nickel 0.30%, molybdenum 0.20%, vanadium 0.0%, manganese.5%. Where elements are specified in combinations of two, three, four, or five and have alloy contents less than those given above, the limit value to be applied for steel class determination is 70% of sum of the individual limit values shown above for two, three, four or five elements concerned. - There shall be a sufficient hardenability to ensure a microstructure consisting of approximately 90% martensite in the core of threaded sections of the fasteners after hardening and quenching and before tempering. 2 H. Paulin & Co., a division of The Hillman Group Canada ULC

MECHANICAL REQUIREMENTS FOR THREADED FASTENERS FIXATIONS FILETÉES POUR APPLICATIONS MÉCANIQUES S.A.E. GRADE (IMPERIAL) I.S.O. CLASS (METRIC) S.A.E & PAPCO IDENT. BOLT SIZE DIAMETER (INCH or MM) METRIC PROOF LOAD (PSI) TENSILE STRENGTH MIN (PSI) HARDNESS ROCKWELL VICKERS 8.8 8.8 M3 to M39 84,000 (580 MPa),000 (800 MPa) C22-C34 250-335 - Carbon steel with additives (e.g. Boron or Mn or Cr) quenched and tempered C: 0.5 to 0.40, P: 0.025 Max., S: 0.025 Max., B: 0.003 Max. Tempering Temperature: Min. 425 C - In case of plain carbon boron steel with carbon content below 0.25% (cast analysis), the minimum manganese content shall be 0.% - There shall be a sufficient hardenability to ensure a structure consisting of approximately 90% martensite in the core of threaded sections for fasteners in the as-hardened condition before tempering. MATERIAL - HEAT TREATMENT - Carbon steel quenched and tempered C: 0.25 to 0.55, P: 0.025 Max., S: 0.025 Max., B: 0.003 Max. Tempering Temperature: Min. 425 C - There shall be a sufficient hardenability to ensure a structure consisting of approximately 90% martensite in the core of threaded sections for fasteners in the as-hardened condition before tempering. - Alloy steel quenched and tempered C: 0.20 to 0.55, P: 0.025 Max., S: 0.025 Max., B: 0.003 Max. Tempering Temperature: Min. 425 C - This alloy steel shall contain at least one of the following elements in the minimum quantity given: Chromium 0.30%, nickel 0.30%, molybdenum 0.20%, vanadium 0.0%. Where elements are specified in combinations of two, three or four and have alloy contents less than those given above, the limit value to be applied for steel class determination is 70% of sum of the individual limit values specified above for two, three or four elements concerned. - There shall be a sufficient hardenability to ensure a structure consisting of approximately 90% martensite in the core of threaded sections for fasteners in the as-hardened condition before tempering. S.A.E. GRADE (IMPERIAL) I.S.O. CLASS (METRIC) S.A.E & PAPCO IDENT. BOLT SIZE DIAMETER (INCH or MM) METRIC PROOF LOAD (PSI) TENSILE STRENGTH MIN (PSI) HARDNESS ROCKWELL VICKERS 9.8 9.8 M. to M 95,000 (50 MPa) 3,000 (900 MPa) C28-C37 290-30 - Carbon steel with additives (e.g. Boron or Mn or Cr) quenched and tempered C: 0.5 to 0.40, P: 0.025 Max., S: 0.025 Max., B: 0.003 Max.Tempering Temperature: Min. 425 C - In case of plain carbon boron steel with carbon content below 0.25% (cast analysis), the minimum manganese content shall be 0.7% - There shall be sufficient hardenability to ensure a structure consisting of approximately 90% martensite in the core of threaded sections for fasteners in the as-hardened condition before tempering. MATERIAL - HEAT TREATMENT - Carbon steel quenched and tempered C: 0.25 to 0.55, P: 0.025 Max., S: 0.025 Max., B: 0.003 Max.Tempering Temperature: Min. 425 C - There shall be a sufficient hardenability to ensure a structure consisting of approximately 90% martensite in the core of threaded sections for fasteners in the as-hardened condition before tempering. - Alloy steel quenched and tempered C: 0.20 to 0.55, P: 0.025 Max., S: 0.025 Max., B: 0.003 Max.Tempering Temperature: Min. 425 C - This alloy steel shall contain at least one of the following elements in the minimum quantity given: Chromium 0.30%, nickel 0.30%, molybdenum 0.20%, vanadium 0.0%. Where elements are specified in combinations of two, three or four and have alloy contents less than those given above, the limit value to be applied for steel class determination is 70% of sum of the individual limit values specified above for two, three or four elements concerned. - There shall be a sufficient hardenability to ensure a structure consisting of approximately 90% martensite in the core of threaded sections for fasteners in the as-hardened condition before tempering..800.28.4000 www.hpaulin.com 27

MECHANICAL REQUIREMENTS FOR THREADED FASTENERS FIXATIONS FILETÉES POUR APPLICATIONS MÉCANIQUES S.A.E. GRADE (IMPERIAL) I.S.O. CLASS (METR S.A.E & PAPCO IDENT. BOLT SIZE DIAMETER (INCH or MM) METRIC PROOF LOAD (PSI) TENSILE STRENGTH MIN (PSI) HARDNESS ROCKWELL VICKERS 0.9 0.9 M3 to M39 20,000 (830 MPa) 5,000 (040 MPa) C32-C39 320-380 - Carbon steel with additives (e.g. Boron or Mn or Cr) quenched and tempered C: 0.20 to 0.55, P: 0.025 Max., S: 0.025 Max., B: 0.003 Max. Tempering Temperature: Min. 425 C - In case of plain carbon boron steel with carbon content below 0.25% (cast analysis), the minimum manganese content shall be 0.7% - There shall be sufficient hardenability to ensure a structure consisting of approximately 90% martensite in the core of threaded sections for fasteners in the as-hardened condition before tempering. MATERIAL - HEAT TREATMENT - Carbon steel quenched and tempered C: 0.25 to 0.55, P: 0.025 Max., S: 0.025 Max., B: 0.003 Max. Tempering Temeprature: Min. 425 C - There shall be sufficient hardenability to ensure a structure consisting of approximately 90% martensite in the core of threaded sections for fasteners in the as-hardened condition before tempering. - Alloy steel quenched and tempered C: 0.20 to 0.55, P: 0.025 Max., S: 0.025 Max., B: 0.003 Max. Tempering Temperature: Min. 425 C - This alloy steel shall contain at least one of the following elements in the minimum quantity given: Chromium 0.30%, nickel 0.30%, molybdenum 0.20%, vanadium 0.0%. Where elements are specified in combinations of two, three or four and have alloy contents less than those given above, the limit value to be applied for steel class determination is 70% of sum of the individual limit values specified above for two, three, four elements concerned. - There shall be a sufficient hardenability to ensure a structure consisting of approximately 90% martensite in the core of threaded sections for fasteners in the as-hardened condition before tempering. IFI Industrial Fasteners Institute http://www.indfast.org ASTM - American Society for Testing and Materials http://www.astm.org SAE - Society of Automotive Engineers http://www.sae.org AISI - American Iron and Steel Institute http://www.steel.org ASME - American Society of Mechanical Engineers https://www.asme.org JIS - Japanese Industrial Standards http://www.jisc.go.jp/eng ISO - International Organization for Standardization http://www.iso.org DIN - German Institute for Standardization http://www.din.de 28 H. Paulin & Co., a division of The Hillman Group Canada ULC