STRUT & SPRING SERVICE TOOLS & COMPRESSORS FRONT-END & SUSPENSION OTC-6592 StrutTamer Extreme with Stand For virtually any straight, conical, or offset spring Handles the heavier springs found on mid- and some full-size truck strut assemblies The arms adjust in and out, up and down, to accept many sizes of springs. (2-1/2" to 10" diameter) (2-1/2" to 24" vertical stroke) No need to change shoes for different size springs #OTC-7249 (Ball Joint Service Set) with purchase of #OTC-6592. BRA-7600 Strut Spring Compressor Can handle the heaviest coil-over-shocks, the Ford F-150 and even the Toyota RAV-4 without need for additional adaptors Handles long, short, narrow or angled springs Opened-up front design for easier access and longer handles for extra torque Optional mobile cart or benchmount accessories $1441. 27 $1095. 00 ATD-7550 Master Spring Compressor Set Set includes: ATD-7585 Master MacPherson Strut Tool: Designed to compress most sizes of MacPherson strut springs ATD-7549 Coil Spring Compressor: Fits most American and some imported cars and light trucks Does not work on AMC and Ford with upper coil spring. $148. 98 LIS-62300 Universal Strut Spring Compressor Fits all strut spring sizes of domestic and import vehicles $93. 29 ATD-7585 Master MacPherson Strut Tool Designed to compress most sizes of MacPherson strut springs Allows quick compression of the coil spring to replace the shock absorber or spring set Also allows for repairs on bent struts, strut tubes and damaged pieces $78. 18 ATD-7549 Coil Spring Compressor Fits most American and some imported cars and light trucks. Does not work on AMC and Ford with upper coil spring. $68. 25 SUN-3903 MacPherson Strut Coil Spring Tool Ideal for removal and installation of auto and light truck coil springs Use on or off vehicle $44. 17 9CL-1100742 MacPherson Strut Coil Spring Compressor For use with an impact wrench Yellow covers protect the lacquered springs from being damaged Suitable for Audi, Acura,Mercedes, BMW, Ford, Honda, Mitsubishi, Nissan, Porsche,Subaru, Toyota, VW, Volvo, etc... Recommended ON-CARapplication for Mercedes 4WDfront suspensions $632. 45 STE-78554 Strut and Shock Installation/Removal Kit Kit contains bits and sockets for easy installation and removal of struts and shocks Used for clamping the piston rod when removing and installing the shock absorber Precise torque can be attained when tightening the shock absorber piston rods $540. 75 155
CAMBER ADJUSTMENT TOOLS JDI-TC614 Air-Assisted Multiple Camber Adjustment Tool Works on many GM and Chrysler vehicles Inflatable air bladder fits between tire and strut for easy and controlled adjustment of camber settings Camber can be easily set with wheels on the ground Eliminates the need for special camber bolts Includes: 2 ft. air hose and bladder Low pressure pop-off valve to prevent overinflating Air control valve for inflating and controlled deflating $259. 95 $41. 88 SG-61800 Strut Alignment Level BALL JOINT SERVICE OTC-6530 Ball Joint Super Set Combines OTC #7249, #7918 and #7996 ball joint sets into one SUPER set Covers: many GM, Ford thru 2003, Dodge light trucks thru 1998, Dodge vans, Durango & Dakota thru 2003, Honda Accord, Civic, Del Sol, & Prelude thru 2001 Includes application cross reference and instructions #OTC-6299 (Pickle Fork Separator Set) with purchase of #OTC-6530. $568. 58 #OTC-7175 (3 Piece Indexing Pry Bar Set) with purchase of #OTC-7249. $930. 93 OTC-6529 Car Ball Joint Master Service Kit Everything required is laid out in this 50+ piece set Comprehensive manual includes diagrams with instructions for use of the adapters Covers vehicles thru 2008 OTC-7249 Ball Joint Service Set Contains 3 receiver tubes: 2-3/4" I.D. x 3" O.D., 2-1/4" I.D. x 2-1/2" O.D., and 1-3/4" I.D. x 2" O.D. $206. 92 OTC-6539 Truck/Van/SUV Ball Joint Master Service Kit Everything required is laid out in this 55+ piece set Comprehensive manual includes diagrams with instructions for use of the adapters Covers: Toyota, Hyundai, KIA, Infinity, Isuzu, Nissan, Chrysler, Dodge, Jeep, Plymouth, Mitsubishi, Ford, Lincoln, Mercury, Mazda, Chevrolet, Buick, Oldsmobile, Pontiac, Cadillac, GMC, Hummer Covers vehicles thru 2008 OTC-6559 Car/Truck/Van/SUV Ball Joint Master Service Kit Everyting needed for servicing ball joints including 70+ adapters, C-frame and application guide Ball joint application guide contains application charts and diagrams with step-by-step instructions Covers vehicles thru 2008 $1262. 37 $1034. 81 Ball Joint Adapter Kits for Cars Vehicle application chart and diagrams included Does not include the OTC-7248 C-Frame press Part # Description Price OTC-6529-3 OTC-6529-4 OTC-6529-5 OTC-6529-6 25 Piece Set for Ford/Mazda 18 Piece Set for GM 19 Piece Set for Honda/Acura 15 Piece Set for Asian/Import 6529-3 $418.95 $326.74 $330.00 $272.28 156 30 JAN-30 FEB October 20131 to December 31, 2015
BALL JOINT SERVICE MUK-609033 Ball Joint Separator Kit 3 fork sizes: 24mm, 27mm, 31mm Jaw capacity: 30mm 65mm Center screw allows continuous adjustment within the jaw capacity range Great for use on Audi/VW (A3, A4, A6) BMW, Mercedes-Benz No damage to aluminum parts and rubber hoses $279. 95 SLY-68600A Honda/Acura Ball Joint Remover/Installer Tool Removes and installs lower ball joints on the car versus removing steering knuckle and using a shop press Works on Honda/Acura and many other makes of automobiles Used with an air hammer $161. 65 AST-7865 Ball Joint Service Tool with 4-Wheel Drive Adapters For removal and installation of press-fit parts such as ball joints, universal joint and truck brake anchor pins. $137. 11 3/4" Drive Ball Joint Sockets Part # Size Application Price SUN-10213 1-59/64" Chrysler mid-size, rear-wheel drive cars SUN-10214 2-9/64" Chrysle/Dodge light trucks & vans $29.43 $29.43 AST-7897 Ball Joint Service Tool and Master Adapter Set Works on upper and lower ball joints on most GM, Ford and Dodge 2 and 4 wheel drive pickups. $260. 37 3/4" Drive Ball Joint Sockets Part # Size Price SK-84688 1-7/8" SK-84689 2-1/8" $49.61 $49.61 SUSPENSION SERVICE TOOLS MUK-432910 Suspension Wear Indicator Allows for the inspection of moving parts in the lower suspension of a vehicle on any surface Provides a safe and effective replacement for an assortment of pry bars, cheater pipes, wedges and other tools that are commonly used in an attempt to identify worn suspension parts Strut bushings and bearings, link pin bushings, wheel bearings, CV axles, ball joints, tie-rod ends, steering rack mounts, torsion bar bushings and control arm bushings all can be checked for wear, play or looseness with this tool It allows the user to positively see, feel or hear a problem while performing suspension diagnostics $105. 95 #OTC-2510A (Air/Hydraulic Foot Pump) with purchase of #OTC-4240. KINGPIN SERVICE OTC-4240 30 Ton Capacity Kingpin & Brake Anchor Pin Pusher Accommodates straight and tapered kingpins of 7/8" to 2" in diameter and up to 11-1/4" in length Works on many models of trucks and buses Shipping weight: 114 lbs 157
AXLE SERVICE 2838 2839 6 and 12 Point Axle Nut Impact Sockets Part # Drive Description Points SAE/Metric Range Price SUN-2838 1/2" 4 Piece 6 Metric SUN-2839 1/2" SUN-2837 1/2" SUN-2835 1/2" 7 Piece For GM & Chrysler 4 Piece For use on most vehicles 8 Piece For use on most vehicles 6 Metric 12 Metric 12 Metric 30mm 36mm 29mm 38mm 30mm 36mm 29mm 38mm $79.33 $124.69 $107.68 $187.06 $207. 95 STE-78720 12 Piece CV Joint & Axle Service Kit Contains everything needed to service drive shafts on most vehicles: 12" Subaru CV punch 1/2" drive 6 point impact sockets: 27mm, 30mm, 32mm, 36mm 1/2" drive 12 point sockets: 30mm, 32mm, 36mm 1/2" drive impact Hex bit sockets: 14mm, 17mm 3/8" drive impact Triple Square bit sockets: 8mm, 10mm 6 and 12 Point Axle Nut Sockets 40010 40020 39510 39650 22090 Part # Drive Size Points Applications Price LIS-40010 1/2" 29mm 6 Fits some GM and Ford 29mm 6 point applications LIS-40020 1/2" 35mm 6 Fits some Mazda and Subaru 35mm 6 point applications LIS-39510 1/2" 30mm 12 300C, Crossfire 2004, Freightliner Sprinter vans with 215mm rear axle 2004 and up, Magnum 2004, Grand Cherokee V6 models 2005, Lexus ES300, Pontiac Vibe, many Mercedes models, Avalon, Camry, Highlander, Matrix, VW Beetle, Jetta, Golf 1999 and up Removes and installs axle nuts and automatic transmission tail output shafts. LIS-39650 1/2" 39mm 12 Removes and installs Toyota axle nuts on 4WD axle hubs LIS-22090 3/4" 36mm 12 Used to remove harmonic balancer bolt and retorque on installation. Can also be used on axle nuts. Fits some European vehicle applications $23.59 $26.54 $20.66 $25.37 $23.59 MADE IN GERMANY 12 Point Axle Shaft Nut Impact Sockets Part # Size Application Price HAZ-900SZ-30 30mm VW Golf, Jetta, Beetle 2000 to present HAZ-900SZ-36 36mm BMW ASM-6500X18 Rear Axle Bolt Remover/ Installer Socket 1/2" drive, 18mm, 12 point Applicable to 2006 VW Jetta & Golf $41.95 $67.95 $144. 68 $45. 20 ASM-6506 Axle Nut Socket Set for VW/Audi Covers 1996-2013 14mm and 17mm Allen 18, 24, 30 and 32mm,12 point sockets SLY-65400 Toyota/Lexus Front Axle Lock Nut Remover Kit 30mm, 12 point 1/2" drive impact socket with special depth Lock nut release tool to unlock the 30mm axle nut on both front and rear wheel drive vehicles Also works on other vehicles with 30mm axle lock crush nuts $57. 70 $76. 95 158 30 JAN-30 FEB October 20131 to December 31, 2015 9CL-91130 8 Piece Axle Spindle Rethreading Set Designed for rethreading damaged or rusted threads on axle spindles Sizes: M20 x 1.25 M20 x 1.50 M22 x 1.00 M22 x 1.50 M24 x 1.50 M24 x 2.00 3/4" x 20UNEF 13/16" x 20UNEF
CV (CONSTANT VELOCITY) SERVICE FRONT-END & SUSPENSION For an amazing video demonstration and to learn more about this product, visit: www.astoria2000.com FLX-FB5000 CV Boot Installer Installs CV boots in less than 20 minutes The CV boot installer is utilized by placing a universal CV Flexx Boot over the installer s retractable aluminum arms. Then, using compressed air, the boot is spread open wide enough to be passed over the axle shaft, without having to remove the axle. Includes a storage case $410. 35 LIS-30600 Offset Boot Clamp Pliers Crimps ear-type clamps in hard to reach areas, except those requiring a torque reading Unique offset design works on clamps on larger size boots $38. 94 LIS-30800 CV Boot Clamp Pliers For all ear-type clamps including GM FWD outboard CV joints $40. 12 Universal Flexx Boots Part # Description Price FLX-FB2000 For ATVs and very small cars FLX-FB3000 For car applications with small shaft axles FLX-FB3001 For car, 4x4 and truck applications with large shaft axles FLX-FB3002 For Camry-style large shaft applications. No cut-off on boot. FLX-FB4000 Rack and pinion boot for 100% of automotive applications $22.63 $22.63 $30.19 $25.87 $28.03 $76. 60 FLX-FB5025-34 50 Piece Universal Gomex Clamps for CV Boot Applications and Radiator Hoses Includes 25 large and 25 small clamps $66. 91 STK-71410 Axle Popper Pops axle shaft loose from engine Insert fork between transaxle case and half shaft. Strike the end of the fork to release the shaft. Included shim fills larger gap found on some vehicles Safer and surer than a pry bar WHEEL HUB PULLERS $250. 49 $250. 49 $59. 55 OTC-6290A Front Hub Puller for 4WD Vehicles Services most 1/2, 3/4 and 1 Ton GM 1988-2000 trucks and SUV s 1994-2000 Dodge Ram 1997-2000 Ford 1985-2001 Cherokee OTC-6574 20 Ton Capacity Universal Hub Puller HD with Plate Fits on wheel hubs with 5"-8"+ bolt circles and popular 5 bolt hubs with 4"-5" bolt circles OTC-7208A Front Hub Puller $65. 32 ATD-3057 Flange-Type Axle and Front Wheel Hub Puller For use on domestic and import cars and light trucks Range: 3-3/4" to 4-1/2" For use on four, five, or six bolt stud design and all non-c lock GM axles 159
TIE ROD SERVICE TOOLS LIS-54500 Large Inner Tie Rod Tool Set 1-7/16", 33.6mm, 38.4mm, 40mm crow foot for GM, and 42mm to fit many Toyota, Nissan, Ford, Lincoln, Mercury and Chevrolet truck and SUV applications. Also fits some Cadillac Escalade, Hummer H2, Honda Passport and Jeep Liberty applications. $118. 09 MAY-31940 5 Piece Pneumatic Separating Pickle Fork Set.401 shank For separating ball joints and tie rods quickly and easily Sizes: 11/16" (17mm); 15/16" (23mm); 1-1/8" (29mm); 1-3/8" (35mm); 1-5/8" (42mm) $199. 95 #MAY-60148 (31" Dominator Curved Blade Pry Bar) with purchase of #MAY-31940. LIS-45750 7 Piece Inner Tie Rod Tool Set 1-1/4", 1-1/2", 1-3/16", 1-5/16", 1-7/16" and 33.6mm $119. 33 LIS-46800 Master Inner Tie Rod Tool Set 29mm, 1-3/16", 1-1/4", 32.5mm, 1-5/16", 33.6mm, 1-3/8", 1-7/16", 1-1/2" $177. 20 LIS-41400 Stepped Pickle Fork Kit Stepped design helps keep tool from bouncing back For separating ball joints, tie rods, Pitman arms and other uses Includes 1-1/8", 15/16", 11/16" forks, pneumatic driver and handle $81. 48 ATD-8705 5 Piece Ball Joint & Tie Rod Separator Set 3 sizes: 11/16", 15/16" & 1-1/8" 1 handle for use with manual hammer 1 handle for use with air hammer $68. 25 ATD-8706 5 Piece Front End Service Tool Set For servicing most Pitman arms, ball joints and tie rods. $192. 45 AST-7802 Tie Rod/Pitman Arm Adjusting Tool Set $62. 27 LIS-41500 Pickle Fork Kit For separating ball joints, tie rods, Pitman arms and other uses Includes 1-1/8", 15/16", 11/16" forks, pneumatic driver and handle $70. 85 OTC-7503 Outer Tie Rod Remover $97. 99 OTC-7314A Pitman Arm Puller $54. 42 OTC-6299 5 Piece Pickle Fork Separator Set 11" x 1-1/8", 11-3/4" x 1-5/8", 11-5/8" x 1-7/16", 16" x 11/16", 16" x 15/16" $136. 11 MUK-608950 1/2" Drive Excentric Turn Chuck Special tool for turning and fixing the tie rod or ball joints Unilateral opening allows universal usage for easy ball joint replacement or wheel alignment $104. 95 160 30 JAN-30 FEB October 20131 to December 31, 2015
TIE ROD SERVICE TOOLS STK-71465 Tie Rod End Pliers This unique design with a socket end and pointed spindle end allows easy wheel pivoting for vehicle steering by temporarily reconnecting ball and socket tie rod ends. $48. 25 CAL-946 Inner Tie Rod Removal Tool $21. 72 1/2" Drive Tie Rod Impact Sockets Part # Description Price SK-84683 2-1/2" x 15/16" U-shape opening SK-84684 1-15/16" x 3/4" U-shape opening $63.47 $47.20 84683 84684 PBT-70897 Steering Rack End Wrench For servicing all inner tie rod ends Suits multiple rack ends and sizes Round with two drive flats Round with no drive flats Hex drive Cam design increases force as load is applied Use on vehicles with limited access to avoid the need to remove the rack assembly $75. 05 MAY-29910 Universal Inner Tie Rod Tool Works on 99% of inner tie rod models, most every length and diameter Grips securely on round, hexagonal and octagonal tie rods. No need for adapters Working diameter range: 35mm to 45mm / 1-3/8" to 1-3/4" $219. 95 STABILIZER BAR SERVICE LOWER CONTROL ARM SERVICE 9CL-89101 9" Long Sway Bar Link Pliers with Sawteeth Holds and easily removes sway bar link Strongly grips and works on rusted nuts, pipes and other objects $31. 56 QPL-1199 Lower Control Arm Triple Action Tool For C-V axle and strut repair One man operation, fast and safe Makes strut replacement easy Removes ball joints without damage Re-installs lower control arm $174. 95 QPL-1198 Stabilizer Bar Link (Linkit) Wear Indicator $109. 95 161