Automation systems for industrial sectional doors and folding doors

246 Automation systems for industrial sectional doors and folding doors All doors in industrial buildings and warehouses can be automated with FT operators. These extremely sturdy and compact systems can be used for even the most difficult applications and are capable of operating shutters of all sizes safely and regularly in any installation space. uide to choosing Operator type Max surface area Voltage Max speed Operator pag. 24V 30rpm ARO 250 industrial sectional doors industrial folding doors 20m² 25m² 230V 33rpm KT PASO C UP 252 230V 33rpm PASO CJA62001 252 230V 33rpm PASO CJA62011 252 230V 24rpm PASO CJA62501 252 230V 24rpm PASO CJA62502 252 230V 24rpm PASO CJA62511 252 230V 24rpm PASO CJA62512 252 35m² 24V 18rpm ARO 250 45m² - 2.4m² 400V 24rpm KT PASO C UP TR 252 400V 24rpm PASO CJA645W01 252 400V 24rpm PASO CJA645W02 252 400V 24rpm PASO CJA645W11 252 400V 24rpm PASO CJA645W12 252 24V - A T 256 230V - A 256 230V - FOR R 254 230V - FOR RSA 254 6m² 230V - FOR 254

nstallation guide 247 A D H N Operator Control unit Receiver Photocell Sensitive edge Post Flashing eacon Control system (key selector switch, keypad, badge reader) Junction box 2x1.5 6x1 3x1.5 R 58 5x1 2x1 4x2.5 N H A H Argo, D A N H Pegaso H, D A A N Forb H H

248 Automation systems for industrial sectional doors and folding doors VNR D ARO P C UP TR O C 01 P C UP MONO O C W01 ACOR N APHA SD R 5 RA C MA THAA THAA P ATAR P ARO ARO PASO CJA645W11 PASO CJA62001 PASO CJA62011 PASO CJA 625 01 PASO CJA62502 PASO CJA62511 PASO CJA62512 PASO CJA645W01 PASO CJA645W02 PASO CJA645W12 FOR FOR R A T A recommended compatible built-in 1 2 3 4 5 6 7 8 PRO Opt. Alternating functions; one cuts out the other Requires PROXMA handheld programmer Requires optional board

Control unit characteristics 249 R 5 RA C MA ATAR P VNR D APHA SD ACOR N THAA THAA P MOTORS POWR SUPPY Motor 1 230V output Motor 2 230V output Motor 1 24V output Motor 2 24V output MT SWTCH NPUTS Single for Opening 1 Single for Closing 2 Separate nputs for Opening Separate nputs for Closing ncoder CONTROS NPUTS Start 1 1 Pedestrian Start 2 1 nternal Start Open 1 1 2 Close 2 1 Timer 1 Pedestrian Timer 1 MRNCY STOP Stop SAFTY SYSTMS NPUTS Photocells Photocells for Opening 2 Photocells for Closing Photocells nputs Check Safety dge 2 Safety dges nputs Check AUXARY NPUTS/OUTPUTS Flashing eacon Courtesy ight 4 Zone ight 4 Stairs ight 5 Solenoid ock 6 Opt. Opt. Opt. Opt. lectromagnet 6 ate Open Warning ight 7 2 3 1 1 3 Second Radio Channel 7 2 3 1 1 3 Alarm 5 MOTORS CONTROS Torque Control Obstacle Recognition Dynamic Path Tracking Speed Control Slowdown Control Speed and Slowdown Control rake Opening Delay Control Closing Delay Control ackup atteries Connection Self Setting FUNCTONS Automatic Re-closing Control (TCA) Open Pulse locking TCA Pulse locking Close Pulse locking Photocell Trigger Setting Fast Close Pre-Alarm 2 Steps 8 3 Steps 4 Steps 8 Deadman Feature Closing Stop Pressure Water Hammer Traffic-ight Management Opt. Opt. Opt. MSCANOUS Accessories power supply 24V 1A 180 ma 200 ma 180 ma 200 ma 200 ma 180 ma 1000 ma Antenna uilt-in Receiver earning via Radio Commands -ink R-Ready Self-Diagnosis PRO PRO Statistics Management PRO PRO Central Commands Management Opt. Opt. Conformity to N 12453-N12445

250 ARO Description 24V electromechanical operator for sectional garage doors installable in residential, industrial and commercial environments. The sturdy mechanical structure and the microprocessor technology of the control unit allow the intensive use of the operator, whilst at the same time guaranteeing reliability and long life. The D-Track torque control system combined with the absolute encoder ensure maximum precision in the control of the gate movement and the detection of obstacles. xclusive encoder position reset knob for fast, safe installations. imit switch based on absolute encoder technology, guaranteeing maximum reliability and stopping precision. Control unit with on-board programming display and D-Track torque, speed and position management and control system. ncorporated dual channel radio receiver. Summary table Code Name Voltage Door surface area Max torque P925202 00001 ARO 24V 20m² 55Nm A P925206 00002 ARO 24V 35m² 80Nm A egend

251 Dimensions 115 22 226.5 351 292 77 59 Technical features ARO ARO Max speed 30rpm 18rpm Control unit VNR D ARO VNR D ARO Max surface area 20m² 35m² Power supply 24V 24V Power input 240W 240W Output revolutions 30rpm 18rpm Shaft rotation speed 30rpm 18rpm Type of limit switch Absolute encoder Absolute encoder Slowdown Yes Yes mpact reaction D-Track D-Track ocking Mechanical Mechanical Manual cycle Non reversing Non reversing Release Cord or steel cable Steel cable Frequency of use ntensive ntensive nvironmental conditions from -15 C to 0 C Protection rating P40 Actuator weight 10kg 10kg

252 PASO CJA Description 24V electromechanical operator for semi-intensive use, for automation of industrial sectional doors up to 25 m2 (Pegaso Cja 625) or up to 45 m2 ncoder managed limit switch, it allows a quick set up from the ground. Max. opening speed 24rpm and max. torque 70Nm (Pegaso Cja625); max. opening speed 24rpm and max. torque 100Nm (Pegaso Cja 645) Management system for stop and intermediate limit switches based on absolute encoder technology with settable zero position. Control unit with deadman feature on-board operator Ready-to-use cables with quick-fit connectors. Summary table Code Name Voltage Door surface area R965001 00003 KT PASO C UP TR 400V 45m² R965002 00002 KT PASO C UP 230V 20m² P925205 00003 PASO CJA62001 230V 20m² P925205 00004 PASO CJA62011 230V 20m² P925203 00004 PASO CJA62501 230V 25m² P925204 00004 PASO CJA62502 230V 25m² P925203 00006 PASO CJA62511 230V 25m² P925204 00006 PASO CJA62512 230V 25m² P925203 00005 PASO CJA645W01 400V 45m² P925204 00005 PASO CJA645W02 400V 45m² P925203 00007 PASO CJA645W11 400V 45m² P925204 00007 PASO CJA645W12 400V 45m²

253 Dimensions 97 153 36 min 346 max 454 min 127 max 235 277 82 85 82 56 372 350 55.5 Technical features PASO CJA62001 PASO CJA645W11 PASO CJA62011 PASO CJA62501 PASO CJA62502 PASO CJA62511 PASO CJA62512 PASO CJA645W01 PASO CJA645W02 PASO CJA645W12 Max speed 33rpm 24rpm 33rpm 24rpm 24rpm 24rpm 24rpm 24rpm 24rpm 24rpm Max surface area 20m² 45m² 20m² 25m² 25m² 25m² 25m² 45m² 45m² 45m² Power supply 230V 400V 230V 230V 230V 230V 230V 400V 400V 400V Power input 750W 980W 750W 750W 750W 750W 750W 980W 980W 980W Shaft diameter 25.4mm Travel 18giri 18giri 18giri 18giri 18giri 18giri 18giri 18giri 18giri 18giri Max torque 50Nm 100Nm 50Nm 70Nm 70Nm 70Nm 70Nm 100Nm 100Nm 100Nm Shaft rotation speed 33rpm 24rpm 33rpm 24rpm 24rpm 24rpm 24rpm 24rpm 24rpm 24rpm Type of limit switch ncoder ncoder ncoder ncoder ncoder ncoder ncoder ncoder ncoder ncoder ocking Mechanical Mechanical Mechanical Mechanical Mechanical Mechanical Mechanical Mechanical Mechanical Mechanical Release Frequency of use Chain ntensive Chain Semiintensive Chain Semiintensive Chain Semiintensive Double cable Semiintensive Chain Semiintensive Double cable Semiintensive Chain Double cable Double cable ntensive ntensive ntensive nvironmental from -10 C to 0 C conditions Protection rating P54 P55 P54 P55 P54 P55 Actuator weight 12.4kg 12.2kg 12.4kg 12.4kg 11.2kg 12.4kg 11.2kg 12.2kg 11kg 11kg O C 01 Control board for PASO CJA single phase operators O C 01 D113767 00002 Application: control panel for one operator PASO CJA monophase series oard power supply: 230V single-phase Operator power supply: 230V monophase

254 FOR Description Hydraulic operator for very intensive use for industrial folding doors, maximum two panels per leaf. Designed for the harshest of use conditions, combining strength with the proven reliability of hydraulic operators. The hydraulic slowdown guarantees silent, smooth movements on even the biggest doors. Also, the adjustment screw makes it possible to adapt the slowdown intensity to all needs. The by-pass valves allow the exact setting of the torque separately and independently for opening and closing. All-aluminium structure with high-resistance anodising treatment. Summary table Code Name Voltage Door surface egend area P935017 00001 FOR 230V 6m² A P935019 00001 FOR R 230V 2.4m² A P935038 00001 FOR RSA 230V 2.4m² A

255 Dimensions 565 290 275 83 95 137,5 137,5 83 30 95 Technical features FOR FOR R FOR RSA Control unit R 5 Max surface area 6m² 2.4m² 2.4m² Power supply 230V 230V 230V Power input 250W 250W 250W Opening or closing time 25sec. 13+slowdownsec. 13+slowdownsec. Slowdown No Yes Yes mpact reaction Sure-safe anti-crushing system with 2 bypass valves Sure-safe anti-crushing system with 2 bypass valves Sure-safe anti-crushing system with 2 bypass valves ocking Hydraulic Hydraulic Hydraulic Release ever or steel cable ever or steel cable ever or steel cable Frequency of use Very intensive Very intensive Very intensive nvironmental conditions from -15 C to 0 C Protection rating Actuator weight 12.5kg 13kg 13kg P20 R 5 Universal control panel for one or two 230V operators - 600+600W R 5 D113693 00003 Application: universal control panel for one or two operators oard power supply: 230V single-phase Operators power supply: 230V single-phase 600+600W Main features: removable terminal blocks, programming and diagnostics with display, incorporated dual channel receiver, plug-in connector for additional receiver, electric snap latch or magnetic lock connection, electronic torque limiter, electronic slowdown during opening and closing, separate limit switch inputs for each motor, possibility of traffic-light management and hydraulic operator pre-heating with SSR5 board Main functions: automatic re-closing, separate motor working times, stays locked when closed, water hammer, 2/3/4 step logic, partial opening, fast closing, separate opening and closing Compatibility: R 4

256 A Description Range of electromechanical operators for industrial folding doors, maximum two panels per leaf. Available also in 24V version to guarantee maximum anti-crushing safety and precision in movement and slowdown. Control unit with programming display, automatic setting menu, simplified programming and virtual encoder in 24V version. uilt-in, adjustable, single-cable electromechanical limit switch system. Removable steel cable system. Summary table Code Name Voltage Door Panel egend weight length P935072 00002 A T 24V 250kg A 2m P935077 00001 A 230V 250kg A 2m

257 Dimensions 146 220 360 Technical features A T A Control unit THAA ATAR P Power supply 24V 230V Power input 40W 300W Max torque 300Nm 320Nm Type of limit switch lectric lectric Slowdown Yes No mpact reaction D-Track lectric clutch ocking Mechanical Mechanical Release Release handle with personal key Release handle with personal key Frequency of use Semi-intensive Semi-intensive nvironmental conditions from -15 C to 0 C Protection rating P4X P44 Actuator weight 16kg 16kg THAA Control panel for one or two 24V operators for swing gates THAA D113745 00002 Application: control panel for one or two 24V operators for swing gates oard power supply: 230V single-phase Operators power supply: 24Vdc 180W max each operator Main features: removable terminal blocks with new standard colour-coding, simplified scenario-based programming with display and incorporated dual channel receiver, D-Track anti-crushing system, slowdown during opening and closing and electronic self-learning Main functions: automatic re-closing, fast closing, partial opening, deadman feature Compatibility: RA C MA, RA, RA R, RA MA R

258 Product accessories ARO RCA N733421 ever for ARO with steel cable, length 3.5 m T AT P125005 Set of backup batteries for RA C MA, RA C X, HYDRA N, ARO C RCA N733422 ever for ARO with steel cable, length 7 m CKK N999592 Pack of mounting tabs for ARO and ARO PASO CJA O C 01 D113767 00002 Control board for PASO CJA single phase operators PASO UP CONTRO 10 D121625 Cable with pre-wired OPN - STOP - COS keypad for PASO UP operators. For adjusting motor limit switches from floor level. ength 10 m O C W01 D113768 00002 Application: control unit for PASO CJA three-phase operators-oard power supply: 400V three-phase-operator power supply: 400V three-phase PASO ADA N733449 Adapter for installation on doors with 1 1/4 shaft PASO CA NC 5 D121674 Pre-wired connection cable between operator and external control unit for the management of encoder. enght 5m P CCP N999468 xtension for PASO C operators chain. ength 4 m PASO CA NC 10 D121675 Pre-wired connection cable between operator and external control unit for the management of encoder. enght 10m SFZ N733121 Additional fixing bracket kit. To be used on chain drive installations. PASO CA AUTO 5N D121679 Pre-wired connection cable between P NT and external control unit electric power supply ength 5 m P 12/USS S N733338 Z12 pinion gear for industrial sectional doors, for 1 (25.4 mm) shafts PASO CA AUTO 10N D121680 Pre-wired connection cable between P NT and external control unit electric power supply ength 10 m P 14/USS S N733336 Z14 pinion gear for industrial sectional doors, for 1 (25.4 mm) shafts PASO CA MONO D121631 Pre-wired power supply cable for PASO single phase operators. ength 1 m P 18/USS S N733339 Z18 pinion gear for industrial sectional doors, for 1 (25.4 mm) shafts PASO CA TR D121632 Pre-wired power supply cable for PASO three-phase operators. ength 1 m P 30/USS S N733337 Z30 pinion gear for industrial sectional doors, for 1 (25.4 mm) shafts PASO UP CONTRO 5 D121624 Cable with pre-wired OPN - STOP - COS keypad for PASO UP operators. For adjusting motor limit switches from floor level. ength 5 m COR 30 N733148 Z30 gear kit complete with accessories for industrial sectional doors, for 1 (25.4 mm) shafts

259 PASO CJA COR 40 N733149 Z40 gear kit complete with accessories for industrial sectional doors, for 1 (25.4 mm) shafts FOR R 5 D113693 00003 Universal control panel for one or two 230V operators - 600+600W S N733020 xternal key for RMA, FOR, A and A Tì P A THAA D113745 00002 Control panel for one or two 24V operators for swing gates SCS 1 P111376 Serial board for connection to zone and opposing leaves for control units with display-while stocks last A 201 R02 P111466 NPUT/OUTPUT expansion board SCS W P111408 oard for connection to STTO () keypad and COMPASS SM proximity reader-while stocks last P S N733020 xternal key for RMA, FOR, A and A Tì RCA N733421 ever for ARO with steel cable, length 3.5 m THAA P D113747 00002 Control panel for one or two 24V operators for swing gates RCA N733422 ever for ARO with steel cable, length 7 m RA C MA D113672 00005 Control panel for one or two 24V swing gate operators. A 201 R01 P111468 xpansion board for connection of central units with serial controls management ATAR P D113703 00002 Control panel for one or two 230V/300W operators for swing gates and industrial folding doors A 201 R03 P111467 xpansion board for WAND accessories connection management C T AT P125005 Set of backup batteries for RA C MA, RA C X, HYDRA N, ARO A 201 R04 P111469 xpansion board for UTOOTH connection management

260 Family accessories KO RCA02 R1 D111888 12V two-channel transmitter 433MHz rolling code. Soft touch treatment KO RCA02 R2 D111889 12V two-channel transmitter 433MHz, copyable with rolling code. Soft touch treatment KO RCA02 R3 N999519 12V two-channel transmitter 433MHz rolling code. Soft touch treatment. Pack of 100 items, numbered for block memorisation KO RCA04 R1 D111890 12V four-channel transmitter 433MHz rolling code. Soft touch treatment KO KO RCA04 R2 D111891 12V four-channel transmitter 433MHz, copyable with rolling code. Soft touch treatment KO RCA04 R3 N999520 12V four-channel transmitter 433MHz rolling code. Soft touch treatment. Pack of 100 items, numbered for block memorisation MTTO RC02 R1 D111904 12V two-channel transmitter 433MHz rolling code MTTO RC02 R2 D111905 12V two-channel transmitter 433MHz, copyable with rolling code MTTO RC02 R3 N999542 12V two-channel transmitter 433MHz rolling code. Pack of 100 items, numbered for block memorisation MTTO RC04 R1 D111906 12V four-channel transmitter 433MHz rolling code MTTO RC04 R2 D111907 12V four-channel transmitter 433MHz, copyable with rolling code MTTO RC04 R3 N999543 12V four-channel transmitter 433MHz rolling code. Pack of 100 items, numbered for block memorisation CP1 00 R03 N999522 CP1 00 R03 N999521 Wall mounting clip for KO RCA and MTTO RC remote controls. 30 unit pack T-OX P121019 Wireless digital keypad 433 MHz Rolling code R P121016 4-channel wall-mounted radio control with rolling code SK P121017 xternal key selector switch with vandal-proof metal frame SPC D121611 xternal button panel with 2 start-stop buttons. SPC2 D121612 xternal button panel with 2 open-close buttons. SPC3 D121619 Open stop close button panel.

261 SPC D121613 xternal button panel with mushroom-head emergency button. RMOT CONTRO P111405 Remote control for adjusting and setting FACON, A ON and ACTV8 FACON P111407 ndustrial presence sensor installable up to 7 m Q Q RADUS TA 230 R1 D113748 00002 Flashing beacon with built-in antenna for 230V motors RADUS TA 230 R2 D113749 00002 Flashing beacon without built-in antenna for 230V motors RADUS TA 24 R1 D113748 00003 Flashing beacon with built-in antenna for 24V motors RADUS TA 24 R2 D113749 00003 Flashing beacon without built-in antenna for 24V motors 00 R01 P123026 Metal guard for TA 00 R02 P123025 Wall mounting for TA series flashing beacons CUA 130 P111273 Pair of self-aligning photocells for external application (range 30 m) Power supply 24V ac/ dc CUA 50 P111272 Pair of built-in adjustable photocells (range 30 m) Power supply 24V ac CUA 180 P111452 Pair of orientable photocells (180 horiz./20 vert.) For external application (range 30 m). Power supply 24V ac/dc DCW P111410 Wireless photocell with possibility of managing infrared or resistive safety edge DCW COVR P111454 Anodised aluminium cover for DCW and CUA180 CUA RF P111391 Reflective photocell for external application (range 12 m) Power supply 24V ac/dc (requires S RFP P111409) F S RFP P111409 Reflector and support for wall mounting and mounting on CC post for CUA RF

262 STR N190106 Pair of infrared sensors for DCW VNTMA NS P111401 00001 nfrared device for R C or AR C safety edges (conforms to N 12978 Standard) R C N190104 Rubber safety edge (H 30 mm), price per m AR C 2 P111450 00002 Double profile rubber safety edge ( 2000 x H 60 mm) AR C 4 P111450 00004 Double profile rubber safety edge ( 4000 x H 60 mm) AR C 6 P111450 00006 Double profile rubber safety edge ( 6000 x H 60 mm) AR C A 4 P111451 00004 Double profile rubber safety edge with lip seals ( 4000 x H 60 mm) AR C A 2 P111451 00002 Double profile rubber safety edge with lip seals ( 2000 x H 60 mm) AR C A 6 P111451 00006 Double profile rubber safety edge with lip seals ( 6000 x H 60 mm) ONARDO KT P111386 FT impact measurer ONARDO KT UTOOTH P111387 FT luetooth impact measurer CKK N999592 Pack of mounting tabs for ARO and ARO