Timken Housed Unit Catalog Index

Timken Spherical Roller Solid-Block Housed Units

Timken Housed Unit Catalog Index Overview.................................................2 Introduction............................................4 Shelf Life Policy........................................10 Spherical Roller Solid-Block Housed Units...........C-1 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com 1

TIMKEN Overview GROW STRONGER WITH TIMKEN Every day, people around the world count on the strength of Timken. Our expertise in metallurgy, friction management and mechanical power transmission helps them accelerate improvements in productivity and uptime. We supply products and services that can help keep your operations moving forward, whether you need drive train kits for coercial vehicles, durable housings for bearings in dirty environments, couplings that avoid metal-to-metal contact between motors and gearboxes, repair services for rail bearings, steel for an aircraft engine shaft, or other products and services for your applications. When you choose Timken, you receive more than high-quality products and services: You gain a worldwide team of highly trained and experienced Timken people coitted to working collaboratively with you to improve your business. Globally, our,000 people provide reliable answers for a wide range of operations in manufacturing, mining, medical equipment, aerospace, transportation, oil and gas and other diverse industries. 2 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

TIMKEN Overview INCREASE YOUR EQUIPMENT UPTIME In addition to high-quality bearings, engineered steel and mechanical power transmission components, we provide valuable integrated products and services. For example, we offer repair services and equipment monitoring equipment that can alert you to problems before they impact your uptime. Additionally, we offer a broad selection of seals, premium lubricants, lubricators, couplings and chain to keep your operations moving smoothly. Our 10 technology centers in the United States, Europe and Asia help pioneer tomorrow s innovations with extensive basic and applied scientific research programs. Through internal development and strategic acquisition of innovative companies, we continue to expand our portfolio of highly engineered bearings, steel and components. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com 3

INTRODUCTION HOUSED UNIT OVERVIEW RUGGED TIMKEN HOUSED UNITS HELP PROTECT YOUR BEARINGS When you choose sturdy Timken housings, your bearings can keep rolling smoothly, even in harsh environments impacted by dirt, debris, water and other contaminants. Timken engineers designed special housings to withstand tough challenges on the job. Protected inside durable cast iron or steel, our highly engineered Timken ball and roller bearings work hard to help you manufacture and transport materials, without excessive maintenance due to contaminants. Choose from our selection of housed units designed with ball, tapered and spherical bearings. Select enhancements like Timken seals, lubricants and housing covers best suited for each task. Our engineers help you choose the right combination of bearings and accessories to extend bearing life, increase uptime and reduce maintenance costs. Of course, you can interchange existing products with Timken housed units because our bolt holes and shaft centerline dimensions are designed to conform to industry standards. Timken housed units reflect our strengths in metallurgy, engineering and manufacturing. We produce all our bearings in adherence with the Timken Quality Management System for consistency in all our facilities around the world. 4 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

INTRODUCTION HOUSED UNIT OVERVIEW TIMKEN BALL HOUSED UNITS OFFER EASY INSTALLATION, FLEXIBLE OPTIONS Timken ball housed units, available in a variety of sizes and types, feature wide-inner-ring ball bearings that provide additional shaft support and locking options. The Timken wide-inner-ring ball bearing is designed for straight shafts and can be positioned without shoulders, locknuts or adapters. For easy installation, our ball housed units can be ordered pre-assembled with bearings, housings, seals and locking systems. Choose from pillow blocks, flanged cartridges, take-up units and cylindrical cartridges. Our cast-iron, pressed-steel and other optional materials give you durable choices for the exterior covers. Timken locking options include set screws, self-locking collars and concentric collars. Timken Guarding Technology deters set-screw damage to shafts by placing a hardened band in the groove along the inner ring of the bearing. The set screws press against the band to transfer gripping pressure onto the shaft, preventing nicks, as well as raised-metal or permanent shaft damage. The stainless-steel band resists corrosion on the shaft. This system is particularly helpful for applications where it would be expensive and time-consuming to replace shafts. Typical industries and applications Use Timken ball bearing housed units in agricultural applications, fans, blowers, food processing devices and conveyors. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com 5

INTRODUCTION HOUSED UNIT OVERVIEW TIMKEN TYPE E HOUSED UNITS REPEL CONTAMINANTS, ENHANCE PERFORMANCE Timken Type E tapered roller bearing housed units feature double-lip seals and locking collars that protect against water and other contaminants. This double-lip seal design blocks debris and retains grease better than single-lip or triple-lip seals, according to Timken 12 laboratory tests. Its cast-iron exterior includes a corrosion-resistant electro-coat finish for the housing and collar, a more durable shield than industry-standard powder coating or black oxide. Set screws with nylon patches reduce back-out, even in rigorous applications. Premium Timken tapered roller bearings inside Type E housings are manufactured with advanced technology that results in longer predicted useful bearing life than other housed units with standard bearings. Designed with optimized bearing profiles and improved surface finishes, Timken tapered roller bearings operate efficiently within the housing. Typical industries and applications Use Timken Type E housings for pulp and paper, power generation, mining, cement and aggregate industries. Our Type E housed units also are widely used in equipment for air-handling and treatment of water and waste water. Other coon machine applications include mixers, washers, shredders, mills and oven/furnace roller beds. 6 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

INTRODUCTION HOUSED UNIT OVERVIEW TIMKEN SPHERICAL ROLLER BEARING SOLID-BLOCK HOUSED UNITS WITHSTAND HARSH CONDITIONS Timken spherical roller bearing solid-block housed units stand up to rugged conditions. Composed of solid steel, they withstand most falling debris and handle up to ±1.5 degrees of misalignment. The steel used in these products is up to two times stronger than cast iron, which may break or pound out in tough applications. Timken spherical roller bearing solid-block housed units come in five locking configurations: single and double set screws, eccentric locks for reversing applications, tapered-adaptor locks and double-tapered locks. Choose from three sealing options: labyrinth seals (for high-speed, high-temperature applications) and triple-lip seals made of either nitrile or urethane. Timken steel auxiliary covers provide an extra layer of protection, and they can be filled with Timken lubricants. Typical industries and applications Use Timken spherical roller bearing solid-block housed units in metals mills, aggregate and cement, mining, power generation, agriculture, pulp, paper, sawmills and other forest industries. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com 7

INTRODUCTION HOUSED UNIT OVERVIEW TIMKEN SAF SPLIT-BLOCK HOUSED UNITS BEAR HEAVY LOADS Timken SAF split-block housed units are available in rugged cast iron, ductile iron or cast steel to match a range of industrial environments. Our Timken SAF housed units have separate, matched caps and bases. In larger sizes where housed units are heavier, this split-block design eases installation. Remove the cap using a pry-tool slot for bearing inspection, service and replacement. Available in a variety of shaft sizes, Timken SAF units offer the choice of tapered-bore design for easy mounting or a straight-bore design for better axial location. The block can be converted from fixed to float by removing the stabilizing ring. Several sealing options protect against contamination, including a standard seal, which is a precision aluminum triple-ring labyrinth seal. Typical industries and applications Use Timken SAF housed bearings in power generation, coal, mining, aggregate, cement, metals, pulp, paper and other forestry operations, water treatment and food processing industries. Applications include warehousing, conveyors, movable bridges/heavy structures, industrial fans and blowers. 8 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

TIMKEN How to use this catalog HOW TO USE THIS CATALOG We designed this catalog to help you find the Timken housed units best suited to your specifications. Timken offers an extensive range of bearings and accessories in both imperial and metric sizes. For your convenience, size ranges are indicated in millimeters and inches. Contact your Timken engineer to learn more about our complete line for the special needs of your application. This publication contains dimensions, tolerances and load ratings, as well as engineering sections describing fitting practices for shafts and housings, internal clearances, materials and other bearing features. It provides valuable assistance in the initial consideration of the type and characteristics of the bearings that may best suit your particular needs. ISO and ANSI/ABMA, as used in this publication, refer to the International Organization for Standardization and the American National Standards Institute/American Manufacturers Association. Updates are made periodically to this catalog. Visit www.timken.com for the most recent version of the Timken Housed Unit Catalog. DISCLAIMER This catalog is provided solely to give you analysis tools and data to assist you in your product selection. Product performance is affected by many factors beyond the control of Timken. Therefore, you must validate the suitability and feasibility of all product selections for your applications. Timken products are sold subject to Timken terms and conditions of sale, which include our limited warranty and remedy. You can find these at http://www.timken.com/en-us/purchase/pages/ TermsandConditionsofSale.aspx. Please consult with your Timken engineer for more information and assistance. Every reasonable effort has been made to ensure the accuracy of the information in this writing, but no liability is accepted for errors, omissions or for any other reason. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com 9

TIMKEN SHELF LIFE AND STORAGE OF GREASE-LUBRICATED BEARINGS AND COMPONENTS SHELF LIFE AND STORAGE OF GREASE-LUBRICATED BEARINGS AND COMPONENTS To help you get the most value from our products, Timken provides guidelines for the shelf life of grease-lubricated ball and roller bearings, components and assemblies. Shelf life information is based on Timken and industry test data and experience. SHELF LIFE POLICY Shelf life should be distinguished from lubricated bearing/ component design life as follows: Shelf life of the grease-lubricated bearing/component represents the period of time prior to use or installation. The shelf life is a portion of the anticipated aggregate design life. It is impossible to accurately predict design life due to variations in lubricant bleed rates, oil migration, operating conditions, installation conditions, temperature, humidity and extended storage. Shelf life values, available from Timken, represent a maximum limit and assume adherence to the storage and handling guidelines suggested in this catalog or by a Timken associate. Deviations from the Timken storage and handling guidelines may reduce shelf life. Any specification or operating practice that defines a shorter shelf life should be used. Timken cannot anticipate the performance of the grease lubricant after the bearing or component is installed or placed in service. TIMKEN IS NOT RESPONSIBLE FOR THE SHELF LIFE OF ANY BEARING/COMPONENT LUBRICATED BY ANOTHER PARTY. European REACH Compliance Timken lubricants, greases and similar products sold in standalone containers or delivery systems are subject to the European REACH (Registration, Evaluation, Authorization and Restriction of CHemicals) directive. For import into the European Union, Timken can sell and provide only those lubricants and greases that are registered with ECHA (European CHemical Agency). For further information, please contact your Timken engineer. 10 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

TIMKEN SHELF LIFE AND STORAGE OF GREASE-LUBRICATED BEARINGS AND COMPONENTS STORAGE Timken suggests the following storage guidelines for our finished products (bearings, components and assemblies, referred to as products ): Unless directed otherwise by Timken, products should be kept in their original packaging until they are ready to be placed into service. Do not remove or alter any labels or stencil markings on the packaging. Products should be stored in such a way that the packaging is not pierced, crushed or otherwise damaged. After a product is removed from its packaging, it should be placed into service as soon as possible. When removing a product that is not individually packaged from a bulk pack container, the container should be resealed iediately after the product is removed. Do not use product that has exceeded its shelf life as defined in the Timken shelf life guidelines statement. The storage area temperature should be maintained between 0 C (32 F) and 40 C (104 F); temperature fluctuations should be minimized. The relative humidity should be maintained below 60 percent and the surfaces should be dry. The storage area should be kept free from airborne contaminants such as, but not limited to, dust, dirt, harmful vapors, etc. The storage area should be isolated from undue vibration. Extreme conditions of any kind should be avoided. Due to the fact that Timken is not familiar with your particular storage conditions, we strongly suggest following these guidelines. However, you may be required by circumstances or applicable government requirements to adhere to stricter storage requirements. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com 11

TIMKEN SHELF LIFE AND STORAGE OF GREASE-LUBRICATED BEARINGS AND COMPONENTS Most bearing components typically ship protected with a corrosion-preventive compound that is not a lubricant. These components may be used in oil-lubricated applications without removal of the corrosion-preventive compound. When using some specialized grease lubrications, we advise you to remove the corrosion-preventive compound before packing the bearing components with suitable grease. We pre-pack most housed unit types in this catalog with general-purpose grease suitable for their normal applications. It may be necessary for you to frequently replenish the grease for optimum performance. Be careful in selecting lubrication, however, since different lubricants are often incompatible. You may order housed units pre-lubricated with a specified lubrication. When you receive a bearing or housed unit shipment, do not remove products from their packaging until they are ready for mounting so they do not become corroded or contaminated. Store bearings and housed units in an appropriate atmosphere so they remain protected for the intended period. 12 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

TIMKEN warnings and Cautions WARNING Failure to observe the following warnings could create a risk of death or serious injury. Proper maintenance and handling practices are critical. Failure to follow selection recoendations and installation instructions and to maintain proper lubrication can result in equipment failure. Overheated bearings can ignite explosive atmospheres. Special care must be taken to properly select, install, maintain, and lubricate housed unit bearings that are used in or near atmospheres that may contain explosive levels of combustible gases or accumulations of dust such from grain, coal, or other combustible materials. Consult your equipment designer or supplier for installation and maintenance instructions. Note Do not use excessive force when mounting or dismounting the unit. Follow all tolerance, fit, and torque recoendations. Always follow the Original Equipment Manufacturer s installation and maintenance guidelines. Ensure proper alignment. Never weld housed units. Do not heat components with an open flame. Do not operate at bearing temperatures above 121 C (250 F). Caution Failure to follow these cautions could create a risk of injury. Do not use damaged housed units. The use of a damaged housed unit can result in equipment damage and/or injury. Caution Failure to follow these cautions may result in property damage. If haer and bar are used for installation or removal of a part, use a mild steel bar (e.g., 1010 or 10 grade). Mild steel bars are less likely to cause release of high-speed fragments from the haer, bar or the part being removed. Warnings for this product line are in this catalog and posted on www.timken.com/en-us/products/warnings/pages/ TimkenHousedUnitWarnings.aspx. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com 13

TIMKEN HOUSED UNIT OVERVIEW 14 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Spherical Roller Solid-Block Housed Units Timken spherical roller bearing solid-block housed units provide heavy-duty protection in harsh environments. Designed to handle high temperatures, high speeds, heavy loads, misalignment, and contaminated conditions, these solid-block housed units are rugged enough to help protect bearings working in tough conditions. With machined feet, tapped puller holes, black oxide inner rings and multiple shaft locking options, these cast-steel housed units are easy to install. Updates are made periodically to this catalog. Visit www.timken.com for the most recent version of the Timken Housed Unit Catalog. Typical Industries and Applications Coon industries include metal mills, aggregate and cement, mining, power generation, agriculture, pulp and paper, and sawmills and other forest industries. Applications include material conveying, coercial and industrial building equipment, sugar mill machinery, waste management and water treatment equipment, off-highway and construction vehicles, fans, blowers, cranes, lifts and hoists. Introduction.............................................. C-2 Engineering.............................................. C-7 Spherical Roller Solid-Block Housed Unit Product Data Tables..................................... C-53 C TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-1

SPHERICAL ROLLER BEARING Solid-Block HOUSED UNItS Introduction INTRODUCTION When your equipment faces harsh environments, you need roller bearing housed units that are rugged enough to withstand tough conditions and deliver exceptional performance. You gain both with Timken spherical roller bearing solid-block housed units. Designed specifically to perform under extreme conditions, Timken solid-block housed units are able to handle up to ±1.5 degrees of misalignment and withstand the impact of falling debris. Made of cast-steel housings and Timken double-row spherical roller bearings, their unique sealing design offers protection from contaminants. Increased performance and durability helps decrease the overall cost of ownership. Customizable Design Features to Fit Your Equipment With a full line of precision-made shaft-locking styles, seals and housings, it s easy to find the right housed unit to fit your application. Timken spherical roller bearing solid-block housed units interchange with a wide range of mounted roller bearings. Choose from many primary and secondary sealing mechanisms, and you decide how it s built without paying custom charges. Housing Styles Two-bolt pillow blocks. Four-bolt pillow blocks. Flange blocks. Piloted flanges. Cartridges. Take-up blocks. Cartridge units. Locking Styles Eccentric lock. Concentric lock (set screw) single or double collar. Tapered adapter lock. V-Lock double tapered lock single or double nut. Seals Labyrinth seals DuPont Teflon : High-speed applications. Superior in dirty and wet conditions. Able to operate at high temperatures. Resistant to most chemicals. Abrasion-resistant. Triple-lip seals nitrile: Self-purging. Excellent in dirty and wet applications. Chemical- and corrosion-resistant. Triple-lip seals urethane: All the benefits of nitrile, plus resistance to abrasion. Secondary Seals Closed-end covers. Open-end covers with: Triple-lip seal. DuPont Teflon. V-ring seal. Piloted-flange cartridge backing plates with: Triple-lip seal. Flange block backing plates with V-ring seal. Housing Coatings Powder coating standard. Nickel plating optional. Dykor coating optional. DuPont TM is a trademark of E.I. du Pont de Nemours and Company. Teflon is a registered trademark of E.I. du Pont de Nemours and Company. Dykor is a registered trademark of Whitford Corporation. Fig. C-1. Two-bolt pillow block. Fig. C-2. Four-bolt pillow block. C-2 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

SPHERICAL ROLLER BEARING Solid-Block HOUSED UNITS Introduction Outlasting the Competition Timken solid-block housed units last a long time, yet you don t pay extra for reliability. Experience an increase in performance and durability and a decrease in your overall cost of ownership when you use a Timken solid-block housed unit. Stands Up To Harsh Conditions Protects. Harsh operating environments and lubrication issues often lead to housed unit bearing damage. Timken solidblock housed units multiply protection with primary and secondary seal options, as well as steel covers in sizes to fit these units. The space between the primary and secondary seals offers a fillable grease cavity for more protection. Handles Misalignment. Without a properly aligned shaft, the life expectancy of most housed units decreases. However, Timken spherical roller bearing solid-block housed units run efficiently on misaligned shafts up to ±1.5 degrees, thanks to their unique design and Timken spherical roller bearings. INDUSTRIES AND APPLICATIONS Metal mills. Aggregate and cement. Mining. Power generation. Sawmills and other forest process industries. Pulp and paper. Material conveying. Coercial and industrial building equipment. Sugar mills. Agriculture. Waste management and water treatment. Off-highway and construction vehicles. HVAC, fans and blowers. Cranes, lifts and hoists. Dependable Service Every Timken spherical roller bearing solid-block housed unit is backed by the service of our industry-leading experts who are ready to assist you with product design, application knowledge and field engineering support anything you need to help improve uptime and maximize equipment performance. Fig. C-3. Flange block. Fig. C-4. Take-up block. Fig. C-5. Piloted-flange cartridge. Fig. C-6. Cartridge block. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-3

SPHERICAL ROLLER BEARING Solid-Block HOUSED UNItS Introduction Locking Styles V-Lock (DOUBLE-TAPERED lock) U.S. Pat. 7344313 The V-Lock locking mechanism is excellent in high-speed applications and designed to maximize shaft-holding power and minimize the time needed for installation and removal as compared to conventional locking mechanisms. With no need for feeler gages during installation, the V-Lock locking mechanism offers superior holding power and is designed to eliminate overtightening. Mechanical withdrawal is a feature of doublenut units. Eccentric Lock EC Series A reduced eccentric offset results in more mechanical advantage. This series provides a secure lock that should not release from a properly prepared shaft even in reversing applications. Fig. C-10. Eccentric lock. Fig. C-7. V-Lock. Concentric Lock (set screw) CL Series Two set screws positioned at 60 degrees provide aggressive holding power. When configured with a double-collared insert, the bearing provides double the holding power compared to our standard single-collared insert. Tapered Adapter Lock TA/DV Series Excellent in high-load applications, this design uses a longer 2300-series adapter for increased shaft contact. This design offers the best shaft concentricity and highest capacity all while having the ability to accoodate undersized shafting. Fig. C-11. Tapered adapter lock. Fig. C-8. Single set screw lock. Fig. C-9. Double set screw lock. Housing Coatings Powder coating standard All of our steel housings come powder-coated from the factory. Powder coating gives a hard finish that is tough and durable. Nickel plating optional By nickel plating any of our housings, we are able to offer superior resistance to wear and corrosion. Dykor coating optional Unaffected by most chemicals and solvents, Dykor coating is designed to last in harsh chemical environments while having extreme abrasion resistance. Dykor is a registered trademark of Whitford Corporation. C-4 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

SPHERICAL ROLLER BEARING Solid-Block HOUSED UNITS Introduction SOLID-BLOCK housed unit Benefits Depending on how you configure your bearing for a specific application, there s a wide range of product benefits. Multiple available sizes accoodate shaft diameters from 35 to 180 (1 7 to 7 ). Efficient built-to-order manufacturing. Quick delivery of customized configurations for specific applications. Quicker installation. Machined feet, tapped puller holes, black oxide inner rings and multiple shaft-locking choices make it simpler to install this heavy-duty unit. Improved performance in high-contaminant environments. Wide selection of primary and secondary seals, as well as auxiliary covers. Bidirectional shaft expansion. Double-nut housing feature allows expansion in both directions. Increased uptime. Robust steel housing, a wide variety of seal choices and a high-performance Timken spherical roller bearing result in increased unit uptime. Increased shaft holding power and reduced shaft damage. Eccentric lock series is designed to stay tight in reversing applications on precision-ground shafts. Fewer misalignment issues. s accept up to ±1.5 degrees of misalignment. Protection against over-lubrication. Pressure relief valves come standard when unit is ordered with non-purgeable seals. Dimensionally interchanges with a wide range of other mounted roller bearing units. One-time shaft alignment on all housing unit styles. Machined feet ends allow for precise installation and blocking for faster future unit replacement. Easier removal with standard withdrawal holes on all piloted-flange units. Faster and easier changeover thanks to a comprehensive product offering that interchanges with virtually all solidblock roller bearing units. Note Do not use excessive force when mounting or dismounting the unit. Follow all tolerance, fit and torque recoendations. Always follow the Original Equipment Manufacturer s installation and maintenance guidelines. Ensure proper alignment. Never weld housed units. Do not heat components with an open flame. Do not operate at bearing temperatures above 121 C (250 F). Updates are made periodically to this catalog. Visit www.timken.com for the most recent version of the Timken Housed Unit Catalog. WARNING Failure to observe the following warnings could create a risk of death or serious injury. Proper maintenance and handling practices are critical. Always follow installation instructions and maintain proper lubrication. Overheated bearings can ignite explosive atmospheres. Special care must be taken to properly select, install, maintain, and lubricate housed unit bearings that are used in or near atmospheres that may contain explosive levels of combustible gases or accumulations of dust such as from grain, coal, or other combustible materials. Consult your equipment designer or supplier for installation and maintenance instructions. Caution Failure to follow these cautions could create a risk of injury. Do not use damaged housed units. The use of a damaged housed unit can result in equipment damage and/or injury. Caution Failure to follow these cautions may result in property damage. If haer and bar are used for installation or removal of a part, use a mild steel bar (e.g., 1010 or 10 grade). Mild steel bars are less likely to cause release of high-speed fragments from the haer, bar or the part being removed. Warnings for this product line are in this catalog and posted on www.timken.com/en-us/products/warnings/pages/ TimkenHousedUnitWarnings.aspx. DISCLAIMER This catalog is provided solely to give you analysis tools and data to assist you in your product selection. Product performance is affected by many factors beyond the control of Timken. Therefore, you must validate the suitability and feasibility of all product selections for your applications. Timken products are sold subject to Timken terms and conditions of sale, which include our limited warranty and remedy. You can find these at http://www.timken.com/en-us/purchase/pages/ TermsandConditionsofSale.aspx. Please consult with your Timken engineer for more information and assistance. Every reasonable effort has been made to ensure the accuracy of the information in this writing, but no liability is accepted for errors, omissions or for any other reason. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-5

SPHERICAL ROLLER BEARING Solid-Block HOUSED UNItS Introduction Solid-Block Housed Unit Design Flexibility through interchangeable components. Double-row spherical roller bearing accepts misalignment. Black oxide inner ring reduces shaft fretting corrosion. Six primary seals in any combination: T seal standard labyrinth (DuPont Teflon ). Housing fit: J7, size-for-size to light interference. Standard relief valve. Optional bolt-on open and closed steel or urethane secondary seals. M seal standard lip (nitrile rubber). N seal optional (DuPont Viton ). O seal optional (urethane). B seal optional (nitrile rubber). C seal optional (DuPont Viton). Lubricated with premium industrial grease. Five shaft-locking styles: Single screw set. Double screw set. Eccentric. Tapered adapter. V-Lock. Easily converted to fixed or expansion in the field. Housing can be supplied with powder (standard), nickel or Dykor coatings. Machined feet aid in rapid installation and alignment. Fig. C-12. High performance plus superior ruggedness. Housing manufactured from 75000 psi tensile cast steel that retains the bearingto-housing fit for those rough applications. DuPont TM is a trademark of E.I. du Pont de Nemours and Company. Teflon is a registered trademark of E.I. du Pont de Nemours and Company. Viton is a registered trademark of E.I. du Pont de Nemours and Company. Dykor is a registered trademark of Whitford Corporation. C-6 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

engineering Engineering The following topics are covered within this engineering section: Load....................................... C-8 Normal Speed Ratings for Seals..................... C-25 Seal Material Chemical Compatibility................ C-28 Internal Radial Clearance........................... C-30 ing.......................................... C-32 Misalignment..................................... C-33 Lubrication....................................... C-33 Installation Guides................................. C-34 To view the complete engineering catalog, please visit www.timken.com. To order the catalog, please contact your Timken engineer and request a copy of the Timken Engineering Manual, order number 104. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-7

Engineering Load Load Solid-block housed unit bearings are excellent for many applications including those with: Heavy radial loads. Heavy combined radial and thrust loads. Shock loads. Harsh contamination conditions. Low to moderate speeds. The possibility of misalignment. loads generally come from one of three sources that should all be evaluated and considered when selecting steel housed unit bearings for your application. Contact your Timken engineer for assistance in determining specific application loads and for bearing recoendations. Static loads weights of various components supported by the bearings. Drive loads belts, chains or gears that exert forces on the shaft. Imposed loads forces generated by equipment operation. Generally, bearing loads are described as being radial (load perpendicular to the axis of the shaft) or axial (load parallel to the axis of the shaft). Axial loads also are referred to as thrust loads. Spherical roller bearings, by design, are very capable of accepting heavy radial loads, even when combined with a thrust load. Timken Type E housed units are recoended for use in applications when only thrust loads are present or when the thrust component of the load is larger than the radial component. To determine the allowable radial load at various RPMs for bearings supporting only radial loads, simply use the charts on pages C-10 C-23. For bearings supporting both radial and thrust loads, an equivalent radial load must first be calculated prior to using these tables (see Dynamic Equivalent Radial Load on page C-9). Belt Loads V-belt drives are coon sources of drive loads. A good approximation of drive load may be calculated from the formula: Drive Load = (HP x 189000)/(Pulley Diameter x RPM) Drive Load = (KW x 189000)/(Pulley Diameter x RPM) Load Sharing In some cases, bearings may share the load unequally, depending on their position in relationship to the load. Use the appropriate formula below to determine the drive load on each bearing: B b A a Load A = Drive Load x (a + b)/b Load B = Drive Load x a/b Fig. C-13. Overhung load. B b a Load A = (Drive Load x b)/(a + b) Load B = (Drive Load x a)/(a + b) Fig. C-14. Load between bearings. A C-8 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering Load Dynamic Equivalent Radial Load s that support a combination of radial load and thrust load take an unequal load on one of the rows of rollers. The following formulas and bearing geometry factors are used to convert the independent thrust and radial loads into a single equivalent radial load. The calculated dynamic equivalent radial load (P r ) will have the same effect on bearing life (L 10 ) as a radial load of the same magnitude. where: P r = F r + (Y1 x F a ) when F a /F r e P r = (0.67 x F r ) + (Y2 x F a ) when F a /F r > e P r = Dynamic equivalent radial load F r = Applied radial load (, N) F a = Applied thrust (axial) load (, N) Y1, Y2 and e are bearing geometry factors shown on pages C-10 and C-11. CALCULATED Life Customers select the bearing life of the bearings in equipment they are building. In the absence of a customer bearing life target, the following may be considered as a guideline: If the customers machinery operates eight hours a day, then use a bearing life target of 000 to 30000 hours. If the customers machinery operates hours a day, then use a bearing life target of 40000 to 60000 hours. In addition, a service factor may be used where application conditions are harsh. Extreme environmental conditions or heavy shock or vibration will require the adjustment of load ratings before referring to the L 10 tables. Please contact your Timken engineer for additional information. Standard spherical roller bearing life calculation: where: life = L 10 = (C /P r ) 10 /3 x (667/RPM) C = Dynamic capacity (, N) P r = Radial load/dynamic equivalent radial load RPM = Revolutions per minute DISCLAIMER This catalog is provided solely to give you analysis tools and data to assist you in your product selection. Product performance is affected by many factors beyond the control of timken. Therefore, the suitability and feasibility of all product selection must be validated by you. Terms and Conditions Timken products are sold subject to our terms and conditions of sale, which include its limited warranty and remedy, which terms may be found at http://www.timken.com/en-us/purchase/pages/ termsandconditionsofsale.aspx. Please consult with your Timken engineer for more information and assistance. A note on minimum loads In order for a spherical roller bearing to perform as designed, some radial load should be present. This is particularly true if the bearing is running at high speed. Although it is rarely an issue, as the existing static loads (weights of the combined supported components) usually provide an adequate radial load, there are times when it may be necessary to use a shaft diameter larger than the actual loads require. In these instances, the load becomes a small percentage of the bearing s capacity. Radial loads less than 4 percent of C should be avoided. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-9

Engineering Load Radial and Thrust Factors 50 1 15, 2 55 2 3, 2 1 4 55 2 3, 2 1 4 60, 65 2 7, 2 1 2 60, 65 2 7, 2 1 2 70, 75 2 11, 2 3 4, 2 15, 3 70, 75 2 11, 2 3 4, 2 15, 3 80, 85, 90 3 3, 3 1 4, 3 7, 3 1 2 80, 85, 90 3 3, 3 1 4, 3 7, 3 1 2 100 3 11, 3 3 4, 3 15, 4 110 110, 115 4 7, 4 1 2 125, 130 4 15, 5 22211 22212 22213 22214 22215 222 22217 22219 222 22222 222 22226 22228 TABLE C-1. V-Lock Series (Tapered Bore, C3) Dynamic Capacity C kn 140 31400 9 38100 6 46400 213 47800 222 49900 254 570 297 66900 385 86600 435 97700 555 125000 647 145000 757 170000 863 194000 Equivalent Radial Load Factors Static Capacity C 0 e Y1 Y2 kn 142 31900 174 39000 2 48600 231 500 0 54100 278 62500 3 71900 441 99000 502 113000 653 147000 772 174000 945 2100 1060 237000 0.23 2.95 4.40 0. 2.84 4.23 0. 2.79 4.15 0.23 2.90 4.32 0.22 3.14 4.67 0.22 3.14 4.67 0.22 3.07 4.57 0.23 2.88 4.29 0. 2.85 4. 0.25 2.73 4.06 0.25 2.70 4.02 0.26 2.62 3.90 0.25 2.67 3.98 35 1 7, 1 1 2 40, 45 1 11, 1 3 4 50 1 15, 2 55 2 3, 2 1 4 60, 65 2 7, 2 1 2 70, 75 2 11, 2 3 4, 2 15, 3 80, 85, 90 3 3, 3 1 4, 3 7, 3 1 2 100 3 15, 4 110, 115 4 7, 4 1 2 125, 130 4 15, 5 TABLE C-2. CL Series (Straight Bore, C normal) 228 229 22210 22211 22213 22215 22218 222 22222 22226 Dynamic Capacity C kn 104 23400 109 500 117 26300 140 31400 6 46400 222 49900 355 79700 435 97700 555 125000 757 170000 Equivalent Radial Load Factors Static Capacity C 0 e Y1 Y2 kn 99.7 200 108 0 118 26600 142 31900 2 48600 0 54100 388 870 502 113000 653 147000 945 2100 0.27 2.47 3.67 0.26 2.64 3.93 0. 2.84 4.23 0.23 2.95 4.40 0. 2.79 4.15 0.22 3.14 4.67 0.23 2.90 4.31 0. 2.85 4. 0.25 2.73 4.06 0.26 2.62 3.90 C-10 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering Load 35 1 7, 1 1 2 40, 45 1 11, 1 3 4 50 1 15, 2 55 2 3, 2 1 4 60, 65 2 7, 2 1 2 70, 75 2 11, 2 3 4, 2 15, 3 80, 85, 90 3 3, 3 1 4, 3 7, 3 1 2 100 3 11, 3 3 4, 3 15, 4 110, 115 4 7, 4 1 2 125, 130 4 15, 5 140, 150 5 7, 5 1 2, 5 15, 6 170, 180 6 7, 6 1 2, 6 15, 7 40 1 7, 1 1 2 45 1 11, 1 3 4 50 1 15, 2 55 60 2 3, 2 1 4 65 2 7, 2 1 2 70 2 11, 2 3 4 75 2 15, 3 80 3 3, 3 1 4 85 90 3 7, 3 1 2 100 3 15, 4 110 4 3, 4 1 4 115 4 7, 4 1 2 125 4 15, 5 TABLE C-3. EC Series (Straight Bore, C normal) 228 229 22210 22211 22213 22215 22218 222 22222 22226 23230 23234 229 22210 22211 22212 22213 22215 222 22217 22218 22219 222 22222 222 22226 22228 Dynamic Capacity C kn 104 23400 109 500 117 26300 140 31400 6 46400 2 49900 355 79700 435 97700 555 125000 757 170000 1270 286000 60 373000 Dynamic Capacity C kn 109 500 117 26300 140 31400 9 38100 6 46400 222 49900 254 570 297 66900 355 79700 385 86600 435 97700 555 125000 647 145000 757 170000 863 194000 Equivalent Radial Load Factors Static Capacity C 0 e Y1 Y2 kn 99.7 200 108 0 118 26600 142 31900 2 48600 0 54100 388 870 502 113000 653 147000 945 2100 60 3700 20 494000 TABLE C-4. TA/DV Series (Tapered Bore, C3) 0.27 2.47 3.67 0.26 2.64 3.93 0. 2.84 4.23 0.23 2.95 4.40 0. 2.79 4.15 0.22 3.14 4.67 0.23 2.90 4.31 0. 2.85 4. 0.25 2.73 4.06 0.26 2.62 3.90 0.32 2.08 3.10 0.33 2.08 3.09 Equivalent Radial Load Factors Static Capacity C 0 e Y1 Y2 kn 108 0 118 26600 142 31900 174 39000 2 48600 0 54100 278 62500 3 71900 388 870 441 99000 502 113000 653 147000 772 174000 945 2100 1060 237000 0.26 2.64 3.93 0. 2.84 4.23 0.23 2.95 4.40 0. 2.84 4.23 0. 2.79 4.15 0.22 3.14 4.67 0.22 3.14 4.67 0.22 3.07 4.57 0.23 2.90 4.31 0.23 2.88 4.29 0. 2.85 4. 0.25 2.73 4.06 0.25 2.70 4.02 0.26 2.62 3.90 0.25 2.67 3.98 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-11

Engineering Load Load Ratings Diameter TABLE C-5. V-LocK Series Allowable radial load (kn/) at various RPM (1) C L 10 Life Speed (2) kn 10000 RPM 50 100 0 500 1000 10 1500 1800 2100 00 2700 3000 30 3500 (1) 50.3 40.9 33.2 25.2.5 19.4 18.1 17.2.4 15.8 15.2 14.7 14.5 14.1 11319 9194 7468 5673 4608 4362 4080 3863 3688 3543 34 3314 3250 34 30000 36.2 29.4 23.9 18.1 14.7 14.0 13.1 12.4 11.8 11.3 10.9 10.6 10.4 10.1 8141 6612 5371 4080 3314 3138 2934 2778 2653 2549 60 2383 2338 2276 50 1 15, 2 22211 140 31400 40000 33.2 27.0 21.9.6 13.5 12.8 12.0 11.3 10.8 10.4 10.0 9.7 9.5 9.3 7468 6066 4927 3743 3040 2878 2692 2549 33 2338 2257 2186 2144 88 60000 29.4 23.9 19.4 14.7 12.0 11.3 10.6 10.0 9.6 9.2 8.9 8.6 8.4 8.2 6612 5371 4362 3314 2692 2549 2383 2257 2155 70 1998 1936 1899 1849 100000 25.2.5.6 12.6 10.3 9.7 9.1 8.6 8.2 7.9 7.6 7.4 7.2 7.1 5673 4608 3743 2843 2309 2186 45 1936 1849 1776 1714 61 29 1586 50 100 0 500 1000 10 1500 1800 2100 00 2700 3000 30 (1) 3500 (1) 10000 61.1 49.6 40.3 30.6.9 23.5 22.0.8 19.9 19.1 18.5 17.9 17.5 17.1 13734 11155 9061 6883 5591 5293 4951 4687 4475 4300 4150 4021 3944 3839 30000 43.9 35.7 29.0 22.0 17.9.9 15.8 15.0 14.3 13.8 13.3 12.9 12.6 12.3 9878 8023 6517 4951 4021 3807 3561 3371 3219 3092 2985 2892 2837 2761 55 2 3, 2 1 4 22212 9 38100 40000 40.3 32.7 26.6.2.4 15.5 14.5 13.8 13.1 12.6 12.2 11.8 11.6 11.3 9061 7360 5978 4541 3689 3492 3266 3092 2953 2837 2738 2653 2602 2533 60000 35.7 29.0 23.5 17.9 14.5 13.8 12.9 12.2 11.6 11.2 10.8 10.4 10.2 10.0 8023 6517 5293 4021 3266 3092 2892 2738 2614 2512 25 2349 2304 23 100000 30.6.9.2 15.3 12.5 11.8 11.0 10.4 10.0 9.6 9.3 9.0 8.8 8.6 6883 5591 4541 3450 2802 2653 81 2349 23 2155 80 15 1977 19 50 100 0 500 1000 10 1500 1800 2100 00 2700 3000 (1) 30 (1) 3500 (1) 10000 74.4 60.4 49.1 37.3 30.3 28.7 26.8.2 23.3 22.5 21.8 21.4.8 726 13585 11035 8383 6809 6446 6029 5708 5450 5236 5054 4897 4803 4676 30000 53.5 43.5 35.3 26.8 21.8.6 19.3 18.3 17.4.8.2 15.7 15.4 15.0 130 9771 7937 6029 4897 4636 4336 4105 39 3766 3635 3522 3455 3363 55 2 3, 2 1 4 22213 6 46400 40000 49.1 39.9 32.4.6.0 18.9 17.7.8.0 15.4 14.8 14.4 14.1 13.7 11035 8963 7280 5531 4492 4253 3978 3766 3596 3455 3335 3231 39 3085 60000 43.5 35.3 28.7 21.8 17.7.8 15.7 14.8 14.2 13.6 13.1 12.7 12.5 12.2 9771 7937 6446 4897 3978 3766 3522 3335 3184 3059 2953 2861 2806 2732 100000 37.3 30.3.6 18.7 15.2 14.4 13.4 12.7 12.2 11.7 11.3 10.9 10.7 10.4 8383 6809 5531 41 3413 3231 3022 2861 2732 26 2533 54 07 2343 50 100 0 500 1000 10 1500 1800 2100 00 2700 (1) 3000 (1) 30 (1) 10000 76.6 62.3 50.6 38.4 31.2 29.5 27.6 26.2 25.0.0 23.2 22.4 22.0 17230 13995 11368 8636 7014 6641 6211 5880 5615 5394 57 5045 4948 30000 55.1 44.8 36.4 27.6 22.4 21.2 19.9 18.8 18.0 17.3.7.1 15.8 12392 10066 8176 6211 5045 4776 4467 4229 4038 3880 3745 3628 3559 60, 65 2 7, 2 1 2 22214 213 47800 40000 50.6 41.1 33.4 25.3.6 19.5 18.2 17.3.5 15.8 15.3 14.8 14.5 11368 9234 7500 5697 4628 4381 4098 3880 3704 3559 3435 3328 3265 60000 44.8 36.4 29.5 22.4 18.2 17.3.1 15.3 14.6 14.0 13.5 13.1 12.9 10066 8176 6641 5045 4098 3880 3628 3435 3280 3151 3042 2947 2891 100000 38.4 31.2 25.3 19.3 15.6 14.8 13.8 13.1 12.5 12.0 11.6 11.2 11.0 8636 7014 5697 4328 3515 3328 3113 2947 2814 2703 2610 2528 80 (1) Speeds referenced here may be higher than speed rating for seals. Please refer to the charts on pages C-25 and C-26. (2) For speeds greater than thermal reference speed, contact your Timken engineer. Continued on next page. C-12 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering Load Continued from previous page. Diameter C L 10 Life Speed (2) kn 10000 50 100 0 500 1000 10 1500 1800 2100 00 2700 (1) 3000 (1) 30 (1) 80.0 65.0 52.8 40.1 32.6 30.8 28.8 27.3 26.1 25.0.2 23.4 23.0 17987 14610 11867 9015 7322 6933 6484 6139 5861 5631 5436 5266 56 RPM 30000 57.5 46.7 38.0 28.8 23.4 22.2.7 19.6 18.8 18.0 17.4.8.5 12937 10508 8535 6484 5266 4986 4663 4415 42 4050 3909 3788 3715 60, 65 2 7, 2 1 2 22215 222 49900 40000 52.8 42.9 34.8 26.5 21.5.3 19.0 18.0 17.2.5.0 15.5 15.2 11867 9639 7829 5948 4831 4574 4278 4050 3867 3715 3586 3475 3408 60000 46.7 38.0 30.8 23.4 19.0 18.0.8.0 15.2 14.6 14.1 13.7 13.4 10508 8535 6933 5266 4278 4050 3788 3586 34 3290 3175 3077 3018 100000 40.1 32.6 26.5.1.3 15.5 14.5 13.7 13.1 12.6 12.1 11.7 11.5 9015 7322 5948 4518 3670 3475 3250 3077 2938 2822 27 2639 2589 50 100 0 500 1000 10 1500 1800 2100 00 (1) 2700 (1) 3000 (1) 10000 91.7 74.5 60.5 46.0 37.3 35.4 33.1 31.3 29.9 28.7 27.7 26.9 619 748 13603 10334 8394 7947 7432 7037 6719 6455 6231 6037 70, 75 2 11, 2 3 4, 2 15, 3 222 254 570 30000 40000 66.0 53.6 43.5 33.1 26.9 23.8 22.5 21.5.7 19.9 19.3 14829 145 9784 7432 6037 57 5346 5061 4832 4643 4481 4342 60.5 49.1 39.9 30.3.6 23.3 21.8.7 19.7 18.9 18.3 17.7 13603 11049 8975 6818 5538 53 4904 4643 4433 4259 4111 3983 60000 53.6 43.5 35.4 26.9 21.8.7 19.3 18.3 17.5.8.2 15.7 145 9784 7947 6037 4904 4643 4342 4111 3925 3771 3640 3527 100000 46.0 37.3 30.3 23.0 18.7 17.7.6 15.7 15.0 14.4 13.9 13.5 10334 8394 6818 5179 47 3983 3725 3527 3367 3235 3123 3026 50 100 0 500 1000 10 1500 1800 2100 (1) 00 (1) 2700 (1) 10000 107.3 87.1 70.8 53.8 43.7 41.3 38.7 36.6 35.0 33.6 32.4 115 19588 15910 186 9817 9295 8693 8230 7858 7550 7287 70, 75 2 11, 2 3 4, 2 15, 3 22217 297 66900 30000 40000 77.1 62.7 50.9 38.7 31.4 29.7 27.8 26.3 25.1.2 23.3 17344 14088 11443 8693 7061 6685 6252 5919 5652 5430 51 70.8 57.5 46.7 35.5 28.8 27.3 25.5.2 23.1 22.2 21.4 15910 12923 10497 7974 6477 6132 5735 5430 5184 4981 4808 60000 62.7 50.9 41.3 31.4 25.5.2 22.6 21.4.4 19.6 18.9 14088 11443 9295 7061 5735 5430 5078 4808 4591 4410 4257 100000 53.8 43.7 35.5 26.9 21.9.7 19.4 18.3 17.5.8.2 186 9817 7974 6057 49 4658 4357 4125 3938 3784 3652 50 100 0 500 1000 10 1500 1800 2100 (1) 00 (1) 2700 (1) 10000 138.9 112.8 91.6 69.6 56.5 53.5 50.1 47.4 45.2 43.5 42.0 312 25356 595 15645 12708 132 11252 10654 10172 9773 9433 80, 85, 90 3 3, 3 1 4, 3 7, 3 1 2 22219 385 86600 30000 40000 60000 99.9 81.1 65.9 50.1 40.7 38.5 36.0 34.1 32.5 31.3 30.2 252 18236 14813 11252 9140 8653 8093 7662 73 7029 6785 91.6 74.4 60.4 45.9 37.3 35.3 33.0 31.3 29.9 28.7 27.7 595 729 13588 10322 8384 7938 74 7029 6711 6448 62 81.1 65.9 53.5 40.7 33.0 31.3 29.2 27.7 26.4.5 18236 14813 132 9140 74 7029 6574 62 5942 5709 5511 100000 69.6 56.5 45.9 34.9 28.3 26.8 25.1 23.7 22.7 21.8 21.0 15645 12708 10322 7841 6369 6030 5640 5339 5098 4898 4728 (1) Speeds referenced here may be higher than speed rating for seals. Please refer to the charts on pages C-25 and C-26. (2) For speeds greater than thermal reference speed, contact your Timken engineer. Continued on next page. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-13

Engineering Load Load Ratings continued TABLE C-5. V-LocK Series Allowable radial load (kn/) at various RPM (1) continued Diameter C L 10 Life Speed (2) kn 10000 RPM 50 100 0 500 1000 10 1500 1800 (1) 2100 (1) 00 (1) 2700 (1) 156.7 127.2 103.4 78.5 63.8 60.4 56.5 53.5 51.0 49.0 47.3 35218 28606 23235 17651 14337 13574 12695 119 11476 11025 10642 80, 85, 90 3 3, 3 1 4, 3 7, 3 1 2 222 435 97700 30000 40000 60000 112.7 91.5 74.3 56.5 45.9 43.4 40.6 38.5 36.7 35.3 34.0 25329 574 711 12695 10311 9762 9130 8644 8254 7930 7654 103.4 84.0 68.2 51.8 42.1 39.8 37.3 35.3 33.7 32.4 31.2 23235 18873 15329 145 9459 8955 8375 7930 7571 7274 7021 91.5 74.3 60.4 45.9 37.3 35.3 33.0 31.2 29.8 28.7 27.7 574 711 13574 10311 8375 7930 74 7021 6704 6441 6217 100000 78.5 63.8 51.8 39.3 32.0 30.3 28.3 26.8 25.6.6 23.7 17651 14337 145 8846 7185 6803 6362 60 5752 5526 5334 50 100 0 500 1000 10 1500 (1) 1800 (1) 2100 (1) 00 (1) 10000 0.4 2.8 132.2 100.5 81.6 77.3 72.2 68.4 65.3 62.7 45058 36599 29727 22583 18343 17367 2 15377 14683 14106 100 3 11, 3 3 4, 3 15, 4 22222 555 125000 30000 40000 60000 144.2 117.1 95.1 72.2 58.7 55.6 52.0 49.2 47.0 45.1 307 26323 21381 2 13193 190 182 11060 10560 10145 132.2 107.4 87.2 66.3 53.8 51.0 47.7 45.1 43.1 41.4 29727 146 19613 14899 12102 11458 107 10145 9687 9306 117.1 95.1 77.3 58.7 47.7 45.1 42.2 40.0 38.2 36.7 26323 21381 17367 13193 107 10145 9488 8983 8577 81 100000 100.5 81.6 66.3 50.3 40.9 38.7 36.2 34.3 32.7 31.4 22583 18343 14899 11318 9193 8704 8140 7707 7359 7070 50 100 0 500 1000 10 1500 1800 2100 00 10000 232.5 188.8 153.4 1.5 94.6 89.6 83.8 79.3 75.8 72.8 52268 455 34484 26196 21278 145 18841 17838 17032 363 30000 7.2 135.8 110.3 83.8 68.1 64.5 60.3 57.1 54.5 52.4 37592 30534 802 18841 15303 14489 13551 12829 12250 11769 110 222 647 145000 40000 153.4 1.6 101.2 76.9 62.4 59.1 55.3 52.4 50.0 48.0 34484 28010 22751 17283 14038 13291 130 11769 11237 10796 60000 135.8 110.3 89.6 68.1 55.3 52.4 49.0 46.4 44.3 42.5 30534 802 145 15303 130 11769 11007 10421 9950 9559 100000 1.5 94.6 76.9 58.4 47.4 44.9 42.0 39.8 38.0 36.5 26196 21278 17283 13129 10664 10097 9443 8940 8536 81 (1) Speeds referenced here may be higher than speed rating for seals. Please refer to the charts on pages C-25 and C-26. (2) For speeds greater than thermal reference speed, contact your Timken engineer. Continued on next page. C-14 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering Load Continued from previous page. Diameter C L 10 Life Speed (2) kn 10000 RPM 50 100 0 500 1000 10 (1) 1500 (1) 1800 (1) 2100 (1) 272.6 221.4 179.8 136.6 111.0 105.1 98.3 93.0 88.8 61279 49774 40429 30712 946 23618 289 913 19968 30000 196.1 159.2 129.3 98.3 79.8 75.6 70.7 66.9 63.9 44074 35799 29078 289 17942 987 15887 15041 14362 110, 115 4 7, 4 1 2 22226 757 170000 40000 179.8 146.1 118.6 90.1 73.2 69.3 64.8 61.4 58.6 40429 32839 26673 263 458 15582 14573 13798 13174 60000 159.2 129.3 105.1 79.8 64.8 61.4 57.4 54.3 51.9 35799 29078 23618 17942 14573 13798 12904 12217 165 100000 136.6 111.0 90.1 68.5 55.6 52.7 49.2 46.6 44.5 30712 946 263 15393 12503 11837 11071 10482 10008 50 100 0 500 1000 (1) 10 (1) 1500 (1) 1800 (1) 10000 311.1 252.7 5.2 155.9 126.6 119.9 112.1 106.2 69931 56801 46137 35048 28468 26953 258 23866 30000 223.7 181.7 147.6 112.1 91.1 86.2 80.6 76.4 50296 40853 33183 258 475 19385 18130 175 125, 130 4 15, 5 22228 863 194000 40000 5.2 6.7 135.4 102.9 83.5 79.1 74.0 70.0 46137 37475 30439 23123 18782 17782 631 15746 60000 181.7 147.6 119.9 91.1 74.0 70.0 65.5 62.0 40853 33183 26953 475 631 15746 14726 13942 100000 155.9 126.6 102.9 78.1 63.5 60.1 56.2 53.2 35048 28468 23123 17566 14268 13508 12634 11961 (1) Speeds referenced here may be higher than speed rating for seals. Please refer to the charts on pages C-25 and C-26. (2) For speeds greater than thermal reference speed, contact your Timken engineer. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-15

Engineering Load Load Ratings continued Diameter 35 1 7, 1 1 2 40, 45 1 11, 1 3 4 50 1 15, 2 55 2 3, 2 1 4 60, 65 2 7, 2 1 2 228 229 22210 22211 22213 TABLE C-6. CL SErIES Allowable radial load (kn/) at various RPM (1) C L 10 Life Speed (2) kn 104 23400 109 500 117 26300 140 31400 6 46400 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 RPM 50 100 0 500 1000 10 1500 1800 2100 00 2700 3000 30 3500 37.5 30.5.8 18.8 15.3 14.5 13.5 12.8 12.2 11.7 11.3 11.0 10.8 10.5 8435 6851 5565 4227 3434 3251 3041 2879 2749 2641 2549 70 22 2358 27.0 21.9 17.8 13.5 11.0 10.4 9.7 9.2 8.8 8.4 8.2 7.9 7.7 7.5 6067 4928 4002 3041 70 2338 2187 70 1977 1899 1833 1776 1742 96.8.1.3 12.4 10.1 9.5 8.9 8.4 8.1 7.7 7.5 7.2 7.1 6.9 5565 45 3672 2789 2265 2145 06 1899 1813 1742 82 29 1598 1556 21.9 17.8 14.5 11.0 8.9 8.4 7.9 7.5 7.1 6.9 6.6 6.4 6.3 6.1 4928 4002 3251 70 06 1899 1776 82 06 1543 1489 1443 1415 1378 18.8 15.3 12.4 9.4 7.7 7.2 6.8 6.4 6.1 5.9 5.7 5.5 5.4 5.3 4227 3434 2789 2119 1721 29 15 1443 1378 1323 1278 1238 1214 1182 50 100 0 500 1000 10 1500 1800 2100 00 2700 3000 30 3500 39.3 31.9 25.9 19.7.0 15.1 14.2 13.4 12.8 12.3 11.9 11.5 11.3 11.0 8831 7173 5827 4426 3595 3404 3183 3014 2878 2765 2669 2586 2536 69 28.3 22.9 18.6 14.2 11.5 10.9 10.2 9.6 9.2 8.8 8.5 8.3 8.1 7.9 6352 5159 4191 3183 2586 48 2290 28 70 1988 1919 1860 18 1776 25.9 21.1 17.1 13.0 10.6 10.0 9.3 8.8 8.4 8.1 7.8 7.6 7.4 7.2 5827 4733 3844 29 2372 26 2100 1988 1899 18 1761 1706 73 29 22.9 18.6 15.1 11.5 9.3 8.8 8.3 7.8 7.5 7.2 6.9 6.7 6.6 6.4 5159 4191 3404 2586 2100 1988 1860 1761 81 15 1559 1511 1482 1442 19.7.0 13.0 9.9 8.0 7.6 7.1 6.7 6.4 6.2 6.0 5.8 5.7 5.5 4426 3595 29 2218 1802 1706 1595 1511 1442 1386 1338 1296 1271 1237 50 100 0 500 1000 10 1500 1800 2100 00 2700 3000 30 3500 42.2 34.3 27.8 21.1 17.2.3 15.2 14.4 13.7 13.2 12.7 12.3 12.1 11.8 9480 7700 6255 4751 3859 3654 3417 3235 3089 2968 2865 2776 2723 2650 30.3.6.0 15.2 12.3 11.7 10.9 10.4 9.9 9.5 9.2 8.9 8.7 8.5 6818 5538 4498 3417 2776 2628 58 2327 2222 2135 60 1996 1958 1906 27.8 22.6 18.4 13.9 11.3 10.7 10.0 9.5 9.1 8.7 8.4 8.1 8.0 7.8 6255 5080 4127 3135 2546 11 2255 2135 38 1958 1890 1831 1796 1749.6.0.3 12.3 10.0 9.5 8.9 8.4 8.0 7.7 7.4 7.2 7.1 6.9 5538 4498 3654 2776 2255 2135 1996 1890 1805 1734 74 22 1590 1548 21.1 17.2 13.9 10.6 8.6 8.1 7.6 7.2 6.9 6.6 6.4 6.2 6.1 5.9 4751 3859 3135 2381 1934 1831 1713 22 1548 1487 1436 1391 1364 1328 50 100 0 500 1000 10 1500 1800 2100 00 2700 3000 30 3500 (1) 50.3 40.9 33.2 25.2.5 19.4 18.1 17.2.4 15.8 15.2 14.7 14.5 14.1 11319 9194 7468 5673 4608 4362 4080 3863 3688 3543 34 3314 3250 34 36.2 29.4 23.9 18.1 14.7 14.0 13.1 12.4 11.8 11.3 10.9 10.6 10.4 10.1 8141 6612 5371 4080 3314 3138 2934 2778 2653 2549 60 2383 2338 2276 33.2 27.0 21.9.6 13.5 12.8 12.0 11.3 10.8 10.4 10.0 9.7 9.5 9.3 7468 6066 4927 3743 3040 2878 2692 2549 33 2338 2257 2186 2144 88 29.4 23.9 19.4 14.7 12.0 11.3 10.6 10.0 9.6 9.2 8.9 8.6 8.4 8.2 6612 5371 4362 3314 2692 2549 2383 2257 2155 70 1998 1936 1899 1849 25.2.5.6 12.6 10.3 9.7 9.1 8.6 8.2 7.9 7.6 7.4 7.2 7.1 5673 4608 3743 2843 2309 2186 45 1936 1849 1776 1714 61 29 1586 50 100 0 500 1000 10 1500 1800 2100 00 2700 3000 (1) 30 (1) 3500 (1) 74.4 60.4 49.1 37.3 30.3 28.7 26.8.2 23.3 22.5 21.8 21.4.8 726 13585 11035 8383 6809 6446 6029 5708 5450 5236 5054 4897 4803 4676 53.5 43.5 35.3 26.8 21.8.6 19.3 18.3 17.4.8.2 15.7 15.4 15.0 130 9771 7937 6029 4897 4636 4336 4105 39 3766 3635 3522 3455 3363 49.1 39.9 32.4.6.0 18.9 17.7.8.0 15.4 14.8 14.4 14.1 13.7 11035 8963 7280 5531 4492 4253 3978 3766 3596 3455 3335 3231 39 3085 43.5 35.3 28.7 21.8 17.7.8 15.7 14.8 14.2 13.6 13.1 12.7 12.5 12.2 9771 7937 6446 4897 3978 3766 3522 3335 3184 3059 2953 2861 2806 2732 37.3 30.3.6 18.7 15.2 14.4 13.4 12.7 12.2 11.7 11.3 10.9 10.7 10.4 8383 6809 5531 41 3413 3231 3022 2861 2732 26 2533 54 07 2343 (1) Speeds referenced here may be higher than speed rating for seals. Please refer to the charts on pages C-25 and C-26. (2) For speeds greater than thermal reference speed, contact your Timken engineer. Continued on next page. C- TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering Load Continued from previous page. Diameter 70, 75 2 11, 2 3 4, 2 15, 3 80, 85, 90 3 3, 3 1 4, 3 7, 3 1 2 100 3 15, 4 110, 115 4 7, 4 1 2 125, 130 4 15, 5 22215 22218 222 22222 22226 C L 10 Life Speed (2) kn 2 49900 355 79700 435 97700 555 125000 757 170000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 50 100 0 500 1000 10 1500 1800 2100 00 2700 (1) 3000 (1) 30 (1) 80.0 65.0 52.8 40.1 32.6 30.8 28.8 27.3 26.1 25.0.2 23.4 23.0 17987 14610 11867 9015 7322 6933 6484 6139 5861 5631 5436 5266 56 57.5 46.7 38.0 28.8 23.4 22.2.7 19.6 18.8 18.0 17.4.8.5 12937 10508 8535 6484 5266 4986 4663 4415 42 4050 3909 3788 3715 52.8 42.9 34.8 26.5 21.5.3 19.0 18.0 17.2.5.0 15.5 15.2 11867 9639 7829 5948 4831 4574 4278 4050 3867 3715 3586 3475 3408 46.7 38.0 30.8 23.4 19.0 18.0.8.0 15.2 14.6 14.1 13.7 13.4 10508 8535 6933 5266 4278 4050 3788 3586 34 3290 3175 3077 3018 40.1 32.6 26.5.1.3 15.5 14.5 13.7 13.1 12.6 12.1 11.7 11.5 9015 7322 5948 4518 3670 3475 3250 3077 2938 2822 27 2639 2589 RPM 50 100 0 500 1000 10 1500 1800 2100 (1) 00 (1) 2700 (1) 127.8 103.8 84.3 64.0 52.0 49.3 46.1 43.6 41.6 40.0 38.6 28729 23335 18954 14399 195 11073 10356 9805 9362 8994 8682 91.9 74.7 60.6 46.1 37.4 35.4 33.1 31.4 29.9 28.8 27.8 663 783 13632 10356 8412 7964 7448 7052 6733 6469 64 84.3 68.5 55.6 42.3 34.3 32.5 30.4 28.8 27.5 26.4 25.5 18954 15396 12505 9500 77 7305 6832 6469 6176 5934 5728 74.7 60.6 49.3 37.4 30.4 28.8 26.9 25.5.3 23.4 22.6 783 13632 11073 8412 6832 6469 6050 5728 5469 5254 5072 64.0 52.0 42.3 32.1 26.1.7 23.1 21.9.9.1 19.4 14399 195 9500 72 5862 5550 5190 4914 4692 4508 4351 50 100 0 500 1000 10 1500 1800 (1) 2100 (1) 00 (1) 2700 (1) 156.7 127.2 103.4 78.5 63.8 60.4 56.5 53.5 51.0 49.0 47.3 35218 28606 23235 17651 14337 13574 12695 119 11476 11025 10642 112.7 91.5 74.3 56.5 45.9 43.4 40.6 38.5 36.7 35.3 34.0 25329 574 711 12695 10311 9762 9130 8644 8254 7930 7654 103.4 84.0 68.2 51.8 42.1 39.8 37.3 35.3 33.7 32.4 31.2 23235 18873 15329 145 9459 8955 8375 7930 7571 7274 7021 91.5 74.3 60.4 45.9 37.3 35.3 33.0 31.2 29.8 28.7 27.7 574 711 13574 10311 8375 7930 74 7021 6704 6441 6217 78.5 63.8 51.8 39.3 32.0 30.3 28.3 26.8 25.6.6 23.7 17651 14337 145 8846 7185 6803 6362 60 5752 5526 5334 50 100 0 500 1000 10 1500 (1) 1800 (1) 2100 (1) 00 (1) 0.4 2.8 132.2 100.5 81.6 77.3 72.2 68.4 65.3 62.7 45058 36599 29727 22583 18343 17367 2 15377 14683 14106 144.2 117.1 95.1 72.2 58.7 55.6 52.0 49.2 47.0 45.1 307 26323 21381 2 13193 190 182 11060 10560 10145 132.2 107.4 87.2 66.3 53.8 51.0 47.7 45.1 43.1 41.4 29727 146 19613 14899 12102 11458 107 10145 9687 9306 117.1 95.1 77.3 58.7 47.7 45.1 42.2 40.0 38.2 36.7 26323 21381 17367 13193 107 10145 9488 8983 8577 81 100.5 81.6 66.3 50.3 40.9 38.7 36.2 34.3 32.7 31.4 22583 18343 14899 11318 9193 8704 8140 7707 7359 7070 50 100 0 500 1000 10 (1) 1500 (1) 1800 (1) 2100 (1) 272.6 221.4 179.8 136.6 111.0 105.1 98.3 93.0 88.8 61279 49774 40429 30712 946 23618 289 913 19968 196.1 159.2 129.3 98.3 79.8 75.6 70.7 66.9 63.9 44074 35799 29078 289 17942 987 15887 15041 14362 179.8 146.1 118.6 90.1 73.2 69.3 64.8 61.4 58.6 40429 32839 26673 263 458 15582 14573 13798 13174 159.2 129.3 105.1 79.8 64.8 61.4 57.4 54.3 51.9 35799 29078 23618 17942 14573 13798 12904 12217 165 136.6 111.0 90.1 68.5 55.6 52.7 49.2 46.6 44.5 30712 946 263 15393 12503 11837 11071 10482 10008 (1) Speeds referenced here may be higher than speed rating for seals. Please refer to the charts on pages C-25 and C-26. (2) For speeds greater than thermal reference speed, contact your Timken engineer. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-17

Engineering Load Load Ratings continued TABLE C-7. EC SErIES Allowable radial load (kn/) at various RPM (1) Diameter 35 1 7, 1 1 2 40, 45 1 11, 1 3 4 50 1 15, 2 55 2 3, 2 1 4 60, 65 2 7, 2 1 2 228 229 22210 22211 22213 C L 10 Life Speed (2) kn 104 23400 109 500 117 26300 140 31400 6 46400 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 RPM 50 100 0 500 1000 10 1500 1800 2100 00 2700 3000 30 3500 37.5 30.5.8 18.8 15.3 14.5 13.5 12.8 12.2 11.7 11.3 11.0 10.8 10.5 8435 6851 5565 4227 3434 3251 3041 2879 2749 2641 2549 70 22 2358 27.0 21.9 17.8 13.5 11.0 10.4 9.7 9.2 8.8 8.4 8.2 7.9 7.7 7.5 6067 4928 4002 3041 70 2338 2187 70 1977 1899 1833 1776 1742 96.8.1.3 12.4 10.1 9.5 8.9 8.4 8.1 7.7 7.5 7.2 7.1 6.9 5565 45 3672 2789 2265 2145 06 1899 1813 1742 82 29 1598 1556 21.9 17.8 14.5 11.0 8.9 8.4 7.9 7.5 7.1 6.9 6.6 6.4 6.3 6.1 4928 4002 3251 70 06 1899 1776 82 06 1543 1489 1443 1415 1378 18.8 15.3 12.4 9.4 7.7 7.2 6.8 6.4 6.1 5.9 5.7 5.5 5.4 5.3 4227 3434 2789 2119 1721 29 15 1443 1378 1323 1278 1238 1214 1182 50 100 0 500 1000 10 1500 1800 2100 00 2700 3000 30 3500 39.3 31.9 25.9 19.7.0 15.1 14.2 13.4 12.8 12.3 11.9 11.5 11.3 11.0 8831 7173 5827 4426 3595 3404 3183 3014 2878 2765 2669 2586 2536 69 28.3 22.9 18.6 14.2 11.5 10.9 10.2 9.6 9.2 8.8 8.5 8.3 8.1 7.9 6352 5159 4191 3183 2586 48 2290 28 70 1988 1919 1860 18 1776 25.9 21.1 17.1 13.0 10.6 10.0 9.3 8.8 8.4 8.1 7.8 7.6 7.4 7.2 5827 4733 3844 29 2372 26 2100 1988 1899 18 1761 1706 73 29 22.9 18.6 15.1 11.5 9.3 8.8 8.3 7.8 7.5 7.2 6.9 6.7 6.6 6.4 5159 4191 3404 2586 2100 1988 1860 1761 81 15 1559 1511 1482 1442 19.7.0 13.0 9.9 8.0 7.6 7.1 6.7 6.4 6.2 6.0 5.8 5.7 5.5 4426 3595 29 2218 1802 1706 1595 1511 1442 1386 1338 1296 1271 1237 50 100 0 500 1000 10 1500 1800 2100 00 2700 3000 30 3500 42.2 34.3 27.8 21.1 17.2.3 15.2 14.4 13.7 13.2 12.7 12.3 12.1 11.8 9480 7700 6255 4751 3859 3654 3417 3235 3089 2968 2865 2776 2723 2650 30.3.6.0 15.2 12.3 11.7 10.9 10.4 9.9 9.5 9.2 8.9 8.7 8.5 6818 5538 4498 3417 2776 2628 58 2327 2222 2135 60 1996 1958 1906 27.8 22.6 18.4 13.9 11.3 10.7 10.0 9.5 9.1 8.7 8.4 8.1 8.0 7.8 6255 5080 4127 3135 2546 11 2255 2135 38 1958 1890 1831 1796 1749.6.0.3 12.3 10.0 9.5 8.9 8.4 8.0 7.7 7.4 7.2 7.1 6.9 5538 4498 3654 2776 2255 2135 1996 1890 1805 1734 74 22 1590 1548 21.1 17.2 13.9 10.6 8.6 8.1 7.6 7.2 6.9 6.6 6.4 6.2 6.1 5.9 4751 3859 3135 2381 1934 1831 1713 22 1548 1487 1436 1391 1364 1328 50 100 0 500 1000 10 1500 1800 2100 00 2700 3000 30 3500 (1) 50.3 40.9 33.2 25.2.5 19.4 18.1 17.2.4 15.8 15.2 14.7 14.5 14.1 11319 9194 7468 5673 4608 4362 4080 3863 3688 3543 34 3314 3250 34 36.2 29.4 23.9 18.1 14.7 14.0 13.1 12.4 11.8 11.3 10.9 10.6 10.4 10.1 8141 6612 5371 4080 3314 3138 2934 2778 2653 2549 60 2383 2338 2276 33.2 27.0 21.9.6 13.5 12.8 12.0 11.3 10.8 10.4 10.0 9.7 9.5 9.3 7468 6066 4927 3743 3040 2878 2692 2549 33 2338 2257 2186 2144 88 29.4 23.9 19.4 14.7 12.0 11.3 10.6 10.0 9.6 9.2 8.9 8.6 8.4 8.2 6612 5371 4362 3314 2692 2549 2383 2257 2155 70 1998 1936 1899 1849 25.2.5.6 12.6 10.3 9.7 9.1 8.6 8.2 7.9 7.6 7.4 7.2 7.1 5673 4608 3743 2843 2309 2186 45 1936 1849 1776 1714 61 29 1586 50 100 0 500 1000 10 1500 1800 2100 00 2700 3000 (1) 30 (1) 3500 (1) 74.4 60.4 49.1 37.3 30.3 28.7 26.8.2 23.3 22.5 21.8 21.4.8 726 13585 11035 8383 6809 6446 6029 5708 5450 5236 5054 4897 4803 4676 53.5 43.5 35.3 26.8 21.8.6 19.3 18.3 17.4.8.2 15.7 15.4 15.0 130 9771 7937 6029 4897 4636 4336 4105 39 3766 3635 3522 3455 3363 49.1 39.9 32.4.6.0 18.9 17.7.8.0 15.4 14.8 14.4 14.1 13.7 11035 8963 7280 5531 4492 4253 3978 3766 3596 3455 3335 3231 39 3085 43.5 35.3 28.7 21.8 17.7.8 15.7 14.8 14.2 13.6 13.1 12.7 12.5 12.2 9771 7937 6446 4897 3978 3766 3522 3335 3184 3059 2953 2861 2806 2732 37.3 30.3.6 18.7 15.2 14.4 13.4 12.7 12.2 11.7 11.3 10.9 10.7 10.4 8383 6809 5531 41 3413 3231 3022 2861 2732 26 2533 54 07 2343 (1) Speeds referenced here may be higher than speed rating for seals. Please refer to the charts on pages C-25 and C-26. (2) For speeds greater than thermal reference speed, contact your Timken engineer. Continued on next page. C-18 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering Load Continued from previous page. Diameter 70, 75 2 11, 2 3 4, 2 15, 3 80, 85, 90 3 3, 3 1 4, 3 7, 3 1 2 100 3 11, 3 3 4, 3 15, 4 110, 115 4 7, 4 1 2 125, 130 4 15, 5 22215 22218 222 22222 22226 C L 10 Life Speed (2) kn 222 49900 355 79700 435 97700 555 125000 757 170000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 50 100 0 500 1000 10 1500 1800 2100 00 2700 (1) 3000 (1) 30 (1) 80.0 65.0 52.8 40.1 32.6 30.8 28.8 27.3 26.1 25.0.2 23.4 23.0 17987 14610 11867 9015 7322 6933 6484 6139 5861 5631 5436 5266 56 57.5 46.7 38.0 28.8 23.4 22.2.7 19.6 18.8 18.0 17.4.8.5 12937 10508 8535 6484 5266 4986 4663 4415 42 4050 3909 3788 3715 52.8 42.9 34.8 26.5 21.5.3 19.0 18.0 17.2.5.0 15.5 15.2 11867 9639 7829 5948 4831 4574 4278 4050 3867 3715 3586 3475 3408 46.7 38.0 30.8 23.4 19.0 18.0.8.0 15.2 14.6 14.1 13.7 13.4 10508 8535 6933 5266 4278 4050 3788 3586 34 3290 3175 3077 3018 40.1 32.6 26.5.1.3 15.5 14.5 13.7 13.1 12.6 12.1 11.7 11.5 9015 7322 5948 4518 3670 3475 3250 3077 2938 2822 27 2639 2589 50 100 0 500 1000 10 1500 1800 2100 (1) 00 (1) 2700 (1) 127.8 103.8 84.3 64.0 52.0 49.3 46.1 43.6 41.6 40.0 38.6 28729 23335 18954 14399 195 11073 10356 9805 9362 8994 8682 RPM 91.9 74.7 60.6 46.1 37.4 35.4 33.1 31.4 29.9 28.8 27.8 663 783 13632 10356 8412 7964 7448 7052 6733 6469 64 84.3 68.5 55.6 42.3 34.3 32.5 30.4 28.8 27.5 26.4 25.5 18954 15396 12505 9500 77 7305 6832 6469 6176 5934 5728 74.7 60.6 49.3 37.4 30.4 28.8 26.9 25.5.3 23.4 22.6 783 13632 11073 8412 6832 6469 6050 5728 5469 5254 5072 64.0 52.0 42.3 32.1 26.1.7 23.1 21.9.9.1 19.4 14399 195 9500 72 5862 5550 5190 4914 4692 4508 4351 50 100 0 500 1000 10 1500 1800 (1) 2100 (1) 00 (1) 2700 (1) 156.7 127.2 103.4 78.5 63.8 60.4 56.5 53.5 51.0 49.0 47.3 35218 28606 23235 17651 14337 13574 12695 119 11476 11025 10642 112.7 91.5 74.3 56.5 45.9 43.4 40.6 38.5 36.7 35.3 34.0 25329 574 711 12695 10311 9762 9130 8644 8254 7930 7654 103.4 84.0 68.2 51.8 42.1 39.8 37.3 35.3 33.7 32.4 31.2 23235 18873 15329 145 9459 8955 8375 7930 7571 7274 7021 91.5 74.3 60.4 45.9 37.3 35.3 33.0 31.2 29.8 28.7 27.7 574 711 13574 10311 8375 7930 74 7021 6704 6441 6217 78.5 63.8 51.8 39.3 32.0 30.3 28.3 26.8 25.6.6 23.7 17651 14337 145 8846 7185 6803 6362 60 5752 5526 5334 50 100 0 500 1000 10 1500 (1) 1800 (1) 2100 (1) 00 (1) 0.4 2.8 132.2 100.5 81.6 77.3 72.2 68.4 65.3 62.7 45058 36599 29727 22583 18343 17367 2 15377 14683 14106 144.2 117.1 95.1 72.2 58.7 55.6 52.0 49.2 47.0 45.1 307 26323 21381 2 13193 190 182 11060 10560 10145 132.2 107.4 87.2 66.3 53.8 51.0 47.7 45.1 43.1 41.4 29727 146 19613 14899 12102 11458 107 10145 9687 9306 117.1 95.1 77.3 58.7 47.7 45.1 42.2 40.0 38.2 36.7 26323 21381 17367 13193 107 10145 9488 8983 8577 81 100.5 81.6 66.3 50.3 40.9 38.7 36.2 34.3 32.7 31.4 22583 18343 14899 11318 9193 8704 8140 7707 7359 7070 50 100 0 500 1000 10 (1) 1500 (1) 1800 (1) 2100 (1) 272.6 221.4 179.8 136.6 111.0 105.1 98.3 93.0 88.8 61279 49774 40429 30712 946 23618 289 913 19968 196.1 159.2 129.3 98.3 79.8 75.6 70.7 66.9 63.9 44074 35799 29078 289 17942 987 15887 15041 14362 179.8 146.1 118.6 90.1 73.2 69.3 64.8 61.4 58.6 40429 32839 26673 263 458 15582 14573 13798 13174 159.2 129.3 105.1 79.8 64.8 61.4 57.4 54.3 51.9 35799 29078 23618 17942 14573 13798 12904 12217 165 136.6 111.0 90.1 68.5 55.6 52.7 49.2 46.6 44.5 30712 946 263 15393 12503 11837 11071 10482 10008 (1) Speeds referenced here may be higher than speed rating for seals. Please refer to the charts on pages C-25 and C-26. (2) For speeds greater than thermal reference speed, contact your Timken engineer. Continued on next page. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-19

Engineering Load Load Ratings continued Diameter 140, 150 5 7, 5 1 2, 5 15, 6 170, 180 6 7, 6 1 2, 6 15, 7 23230 23234 TABLE C-7. EC SErIES Allowable radial load (kn/) at various RPM (1) continued C L 10 Life Speed (2) kn 1270 286000 60 373000 50 100 0 500 1000 (1) 10 (1) 458.6 372.5 302.6 229.8 186.7 176.8 10000 103094 83738 680 569 41968 39735 30000 40000 60000 100000 10000 30000 40000 60000 100000 329.8 267.9 217.6 5.3 134.3 127.1 74147 60226 48919 372 30185 28578 302.6 5.8 199.6 151.6 123.2 1.6 680 557 44874 34089 27689 26215 267.9 217.6 176.8 134.3 109.1 103.3 60226 48919 39735 30185 518 23213 229.8 186.7 151.6 115.2 93.6 88.6 569 41968 34089 25896 21034 19914 50 100 0 500 1000 (1) 598.1 485.8 394.6 299.8 3.5 134454 109211 88707 67387 54735 430.2 349.4 283.8 215.6 175.1 96703 78547 63800 48466 39367 394.6 3.5 260.3 197.8 0.6 88707 752 58525 44459 36112 349.4 283.8 230.5 175.1 142.2 78547 63800 51822 39367 31976 299.8 3.5 197.8 150.2 122.0 67387 54735 44459 33773 27433 (1) Speeds referenced here may be higher than speed rating for seals. Please refer to the charts on pages C-25 and C-26. (2) For speeds greater than thermal reference speed, contact your Timken engineer. RPM C- TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering Load Diameter 40 1 7, 1 1 2 45 1 11, 1 3 4 50 1 15, 2 55 60 2 3, 2 1 4 229 22210 22211 22212 22213 C L 10 Life Speed (2) kn 109 500 117 26300 140 31400 9 38100 6 46400 TABLE C-8. TA/Dv SErIES Allowable radial load (kn/) at various RPM (1) 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 RPM 50 100 0 500 1000 10 1500 1800 2100 00 2700 3000 30 3500 39.3 31.9 25.9 19.7.0 15.1 14.2 13.4 12.8 12.3 11.9 11.5 11.3 11.0 8831 7173 5827 4426 3595 3404 3183 3014 2878 2765 2669 2586 2536 69 28.3 22.9 18.6 14.2 11.5 10.9 10.2 9.6 9.2 8.8 8.5 8.3 8.1 7.9 6352 5159 4191 3183 2586 48 2290 28 70 1988 1919 1860 18 1776 25.9 21.1 17.1 13.0 10.6 10.0 9.3 8.8 8.4 8.1 7.8 7.6 7.4 7.2 5827 4733 3844 29 2372 26 2100 1988 1899 18 1761 1706 73 29 22.9 18.6 15.1 11.5 9.3 8.8 8.3 7.8 7.5 7.2 6.9 6.7 6.6 6.4 5159 4191 3404 2586 2100 1988 1860 1761 81 15 1559 1511 1482 1442 19.7.0 13.0 9.9 8.0 7.6 7.1 6.7 6.4 6.2 6.0 5.8 5.7 5.5 4426 3595 29 2218 1802 1706 1595 1511 1442 1386 1338 1296 1271 1237 50 100 0 500 1000 10 1500 1800 2100 00 2700 3000 30 3500 42.2 34.3 27.8 21.1 17.2.3 15.2 14.4 13.7 13.2 12.7 12.3 12.1 11.8 9480 7700 6255 4751 3859 3654 3417 3235 3089 2968 2865 2776 2723 2650 30.3.6.0 15.2 12.3 11.7 10.9 10.4 9.9 9.5 9.2 8.9 8.7 8.5 6818 5538 4498 3417 2776 2628 58 2327 2222 2135 60 1996 1958 1906 27.8 22.6 18.4 13.9 11.3 10.7 10.0 9.5 9.1 8.7 8.4 8.1 8.0 7.8 6255 5080 4127 3135 2546 11 2255 2135 38 1958 1890 1831 1796 1749.6.0.3 12.3 10.0 9.5 8.9 8.4 8.0 7.7 7.4 7.2 7.1 6.9 5538 4498 3654 2776 2255 2135 1996 1890 1805 1734 74 22 1590 1548 21.1 17.2 13.9 10.6 8.6 8.1 7.6 7.2 6.9 6.6 6.4 6.2 6.1 5.9 4751 3859 3135 2381 1934 1831 1713 22 1548 1487 1436 1391 1364 1328 50 100 0 500 1000 10 1500 1800 2100 00 2700 3000 30 3500 (1) 50.3 40.9 33.2 25.2.5 19.4 18.1 17.2.4 15.8 15.2 14.7 14.5 14.1 11319 9194 7468 5673 4608 4362 4080 3863 3688 3543 34 3314 3250 34 36.2 29.4 23.9 18.1 14.7 14.0 13.1 12.4 11.8 11.3 10.9 10.6 10.4 10.1 8141 6612 5371 4080 3314 3138 2934 2778 2653 2549 60 2383 2338 2276 33.2 27.0 21.9.6 13.5 12.8 12.0 11.3 10.8 10.4 10.0 9.7 9.5 9.3 7468 6066 4927 3743 3040 2878 2692 2549 33 2338 2257 2186 2144 88 29.4 23.9 19.4 14.7 12.0 11.3 10.6 10.0 9.6 9.2 8.9 8.6 8.4 8.2 6612 5371 4362 3314 2692 2549 2383 2257 2155 70 1998 1936 1899 1849 25.2.5.6 12.6 10.3 9.7 9.1 8.6 8.2 7.9 7.6 7.4 7.2 7.1 5673 4608 3743 2843 2309 2186 45 1936 1849 1776 1714 61 29 1586 50 100 0 500 1000 10 1500 1800 2100 00 2700 3000 30 (1) 3500 (1) 61.1 49.6 40.3 30.6.9 23.5 22.0.8 19.9 19.1 18.5 17.9 17.5 17.1 13734 11155 9061 6883 5591 5293 4951 4687 4475 4300 4150 4021 3944 3839 43.9 35.7 29.0 22.0 17.9.9 15.8 15.0 14.3 13.8 13.3 12.9 12.6 12.3 9878 8023 6517 4951 4021 3807 3561 3371 3219 3092 2985 2892 2837 2761 40.3 32.7 26.6.2.4 15.5 14.5 13.8 13.1 12.6 12.2 11.8 11.6 11.3 9061 7360 5978 4541 3689 3492 3266 3092 2953 2837 2738 2653 2602 2533 35.7 29.0 23.5 17.9 14.5 13.8 12.9 12.2 11.6 11.2 10.8 10.4 10.2 10.0 8023 6517 5293 4021 3266 3092 2892 2738 2614 2512 25 2349 2304 23 30.6.9.2 15.3 12.5 11.8 11.0 10.4 10.0 9.6 9.3 9.0 8.8 8.6 6883 5591 4541 3450 2802 2653 81 2349 23 2155 80 15 1977 19 50 100 0 500 1000 10 1500 1800 2100 00 2700 3000 (1) 30 (1) 3500 (1) 74.4 60.4 49.1 37.3 30.3 28.7 26.8.2 23.3 22.5 21.8 21.4.8 726 13585 11035 8383 6809 6446 6029 5708 5450 5236 5054 4897 4803 4676 53.5 43.5 35.3 26.8 21.8.6 19.3 18.3 17.4.8.2 15.7 15.4 15.0 130 9771 7937 6029 4897 4636 4336 4105 39 3766 3635 3522 3455 3363 49.1 39.9 32.4.6.0 18.9 17.7.8.0 15.4 14.8 14.4 14.1 13.7 11035 8963 7280 5531 4492 4253 3978 3766 3596 3455 3335 3231 39 3085 43.5 35.3 28.7 21.8 17.7.8 15.7 14.8 14.2 13.6 13.1 12.7 12.5 12.2 9771 7937 6446 4897 3978 3766 3522 3335 3184 3059 2953 2861 2806 2732 37.3 30.3.6 18.7 15.2 14.4 13.4 12.7 12.2 11.7 11.3 10.9 10.7 10.4 8383 6809 5531 41 3413 3231 3022 2861 2732 26 2533 54 07 2343 (1) Speeds referenced here may be higher than speed rating for seals. Please refer to the charts on pages C-25 and C-26. (2) For speeds greater than thermal reference speed, contact your Timken engineer. Continued on next page. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-21

Engineering Load Load Ratings continued Diameter 65 2 7, 2 1 2 70 2 11, 2 3 4 75 2 15, 3 80 3 3, 3 1 4 85 22215 222 22217 22218 22219 TABLE C-8. TA/Dv SErIES Allowable radial load (kn/) at various RPM (1) continued C L 10 Life Speed (2) kn 222 49900 254 570 297 66900 355 79700 385 86600 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 50 100 0 500 1000 10 1500 1800 2100 00 2700 (1) 3000 (1) 30 (1) 80.0 65.0 52.8 40.1 32.6 30.8 28.8 27.3 26.1 25.0.2 23.4 23.0 17987 14610 11867 9015 7322 6933 6484 6139 5861 5631 5436 5266 56 57.5 46.7 38.0 28.8 23.4 22.2.7 19.6 18.8 18.0 17.4.8.5 12937 10508 8535 6484 5266 4986 4663 4415 42 4050 3909 3788 3715 52.8 42.9 34.8 26.5 21.5.3 19.0 18.0 17.2.5.0 15.5 15.2 11867 9639 7829 5948 4831 4574 4278 4050 3867 3715 3586 3475 3408 46.7 38.0 30.8 23.4 19.0 18.0.8.0 15.2 14.6 14.1 13.7 13.4 10508 8535 6933 5266 4278 4050 3788 3586 34 3290 3175 3077 3018 40.1 32.6 26.5.1.3 15.5 14.5 13.7 13.1 12.6 12.1 11.7 11.5 9015 7322 5948 4518 3670 3475 3250 3077 2938 2822 27 2639 2589 50 100 0 500 1000 10 1500 1800 2100 00 (1) 2700 (1) 3000 (1) 91.7 74.5 60.5 46.0 37.3 35.4 33.1 31.3 29.9 28.7 27.7 26.9 619 748 13603 10334 8394 7947 7432 7037 6719 6455 6231 6037 66.0 53.6 43.5 33.1 26.9 23.8 22.5 21.5.7 19.9 19.3 14829 145 9784 7432 6037 57 5346 5061 4832 4643 4481 4342 60.5 49.1 39.9 30.3.6 23.3 21.8.7 19.7 18.9 18.3 17.7 13603 11049 8975 6818 5538 53 4904 4643 4433 4259 4111 3983 53.6 43.5 35.4 26.9 21.8.7 19.3 18.3 17.5.8.2 15.7 145 9784 7947 6037 4904 4643 4342 4111 3925 3771 3640 3527 46.0 37.3 30.3 23.0 18.7 17.7.6 15.7 15.0 14.4 13.9 13.5 10334 8394 6818 5179 47 3983 3725 3527 3367 3235 3123 3026 RPM 50 100 0 500 1000 10 1500 1800 2100 (1) 00 (1) 2700 (1) 107.3 87.1 70.8 53.8 43.7 41.3 38.7 36.6 35.0 33.6 32.4 115 19588 15910 186 9817 9295 8693 8230 7858 7550 7287 77.1 62.7 50.9 38.7 31.4 29.7 27.8 26.3 25.1.2 23.3 17344 14088 11443 8693 7061 6685 6252 5919 5652 5430 51 70.8 57.5 46.7 35.5 28.8 27.3 25.5.2 23.1 22.2 21.4 15910 12923 10497 7974 6477 6132 5735 5430 5184 4981 4808 62.7 50.9 41.3 31.4 25.5.2 22.6 21.4.4 19.6 18.9 14088 11443 9295 7061 5735 5430 5078 4808 4591 4410 4257 53.8 43.7 35.5 26.9 21.9.7 19.4 18.3 17.5.8.2 186 9817 7974 6057 49 4658 4357 4125 3938 3784 3652 50 100 0 500 1000 10 1500 1800 2100 (1) 00 (1) 2700 (1) 127.8 103.8 84.3 64.0 52.0 49.3 46.1 43.6 41.6 40.0 38.6 28729 23335 18954 14399 195 11073 10356 9805 9362 8994 8682 91.9 74.7 60.6 46.1 37.4 35.4 33.1 31.4 29.9 28.8 27.8 663 783 13632 10356 8412 7964 7448 7052 6733 6469 64 84.3 68.5 55.6 42.3 34.3 32.5 30.4 28.8 27.5 26.4 25.5 18954 15396 12505 9500 77 7305 6832 6469 6176 5934 5728 74.7 60.6 49.3 37.4 30.4 28.8 26.9 25.5.3 23.4 22.6 783 13632 11073 8412 6832 6469 6050 5728 5469 5254 5072 64.0 52.0 42.3 32.1 26.1.7 23.1 21.9.9.1 19.4 14399 195 9500 72 5862 5550 5190 4914 4692 4508 4351 50 100 0 500 1000 10 1500 1800 2100 (1) 00 (1) 2700 (1) 138.9 112.8 91.6 69.6 56.5 53.5 50.1 47.4 45.2 43.5 42.0 312 25356 595 15645 12708 132 11252 10654 10172 9773 9433 99.9 81.1 65.9 50.1 40.7 38.5 36.0 34.1 32.5 31.3 30.2 252 18236 14813 11252 9140 8653 8093 7662 73 7029 6785 91.6 74.4 60.4 45.9 37.3 35.3 33.0 31.3 29.9 28.7 27.7 595 729 13588 10322 8384 7938 74 7029 6711 6448 62 81.1 65.9 53.5 40.7 33.0 31.3 29.2 27.7 26.4.5 18236 14813 132 9140 74 7029 6574 62 5942 5709 5511 69.6 56.5 45.9 34.9 28.3 26.8 25.1 23.7 22.7 21.8 21.0 15645 12708 10322 7841 6369 6030 5640 5339 5098 4898 4728 (1) Speeds referenced here may be higher than speed rating for seals. Please refer to the charts on pages C-25 and C-26. (2) For speeds greater than thermal reference speed, contact your Timken engineer. Continued on next page. C-22 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering Load Continued from previous page. Diameter 90 3 7, 3 1 2 100 3 15, 4 110 4 3, 4 1 4 115 4 7, 4 1 2 125 4 15, 5 222 22222 222 22226 22228 C L 10 Life Speed (2) kn 435 97700 555 125000 647 145000 757 170000 863 194000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 10000 30000 40000 60000 100000 RPM 50 100 0 500 1000 10 1500 1800 (1) 2100 (1) 00 (1) 2700 (1) 156.7 127.2 103.4 78.5 63.8 60.4 56.5 53.5 51.0 49.0 47.3 35218 28606 23235 17651 14337 13574 12695 119 11476 11025 10642 112.7 91.5 74.3 56.5 45.9 43.4 40.6 38.5 36.7 35.3 34.0 25329 574 711 12695 10311 9762 9130 8644 8254 7930 7654 103.4 84.0 68.2 51.8 42.1 39.8 37.3 35.3 33.7 32.4 31.2 23235 18873 15329 145 9459 8955 8375 7930 7571 7274 7021 91.5 74.3 60.4 45.9 37.3 35.3 33.0 31.2 29.8 28.7 27.7 574 711 13574 10311 8375 7930 74 7021 6704 6441 6217 78.5 63.8 51.8 39.3 32.0 30.3 28.3 26.8 25.6.6 23.7 17651 14337 145 8846 7185 6803 6362 60 5752 5526 5334 50 100 0 500 1000 10 1500 (1) 1800 (1) 2100 (1) 00 (1) 0.4 2.8 132.2 100.5 81.6 77.3 72.2 68.4 65.3 62.7 45058 36599 29727 22583 18343 17367 2 15377 14683 14106 144.2 117.1 95.1 72.2 58.7 55.6 52.0 49.2 47.0 45.1 307 26323 21381 2 13193 190 182 11060 10560 10145 132.2 107.4 87.2 66.3 53.8 51.0 47.7 45.1 43.1 41.4 29727 146 19613 14899 12102 11458 107 10145 9687 9306 117.1 95.1 77.3 58.7 47.7 45.1 42.2 40.0 38.2 36.7 26323 21381 17367 13193 107 10145 9488 8983 8577 81 100.5 81.6 66.3 50.3 40.9 38.7 36.2 34.3 32.7 31.4 22583 18343 14899 11318 9193 8704 8140 7707 7359 7070 50 100 0 500 1000 10 1500 (1) 1800 (1) 2100 (1) 00 (1) 232.5 188.8 153.4 1.5 94.6 89.6 83.8 79.3 75.8 72.8 52268 455 34484 26196 21278 145 18841 17838 17032 363 7.2 135.8 110.3 83.8 68.1 64.5 60.3 57.1 54.5 52.4 37592 30534 802 18841 15303 14489 13551 12829 12250 11769 153.4 1.6 101.2 76.9 62.4 59.1 55.3 52.4 50.0 48.0 34484 28010 22751 17283 14038 13291 130 11769 11237 10796 135.8 110.3 89.6 68.1 55.3 52.4 49.0 46.4 44.3 42.5 30534 802 145 15303 130 11769 11007 10421 9950 9559 1.5 94.6 76.9 58.4 47.4 44.9 42.0 39.8 38.0 36.5 26196 21278 17283 13129 10664 10097 9443 8940 8536 81 50 100 0 500 1000 10 (1) 1500 (1) 1800 (1) 2100 (1) 272.6 221.4 179.8 136.6 111.0 105.1 98.3 93.0 88.8 61279 49774 40429 30712 946 23618 289 913 19968 196.1 159.2 129.3 98.3 79.8 75.6 70.7 66.9 63.9 44074 35799 29078 289 17942 987 15887 15041 14362 179.8 146.1 118.6 90.1 73.2 69.3 64.8 61.4 58.6 40429 32839 26673 263 458 15582 14573 13798 13174 159.2 129.3 105.1 79.8 64.8 61.4 57.4 54.3 51.9 35799 29078 23618 17942 14573 13798 12904 12217 165 136.6 111.0 90.1 68.5 55.6 52.7 49.2 46.6 44.5 30712 946 263 15393 12503 11837 11071 10482 10008 50 100 0 500 1000 (1) 10 (1) 1500 (1) 1800 (1) 311.1 252.7 5.2 155.9 126.6 119.9 112.1 106.2 69931 56801 46137 35048 28468 26953 258 23866 223.7 181.7 147.6 112.1 91.1 86.2 80.6 76.4 50296 40853 33183 258 475 19385 18130 175 5.2 6.7 135.4 102.9 83.5 79.1 74.0 70.0 46137 37475 30439 23123 18782 17782 631 15746 181.7 147.6 119.9 91.1 74.0 70.0 65.5 62.0 40853 33183 26953 475 631 15746 14726 13942 155.9 126.6 102.9 78.1 63.5 60.1 56.2 53.2 35048 28468 23123 17566 14268 13508 12634 11961 (1) Speeds referenced here may be higher than speed rating for seals. Please refer to the charts on pages C-25 and C-26. (2) For speeds greater than thermal reference speed, contact your Timken engineer. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-23

Engineering Load Housing Loads Because solid-block housed unit bearings are made of cast steel, they are built to last with high allowable load in multiple orientations. Refer to tables below for allowable housing loads. Fig. C-15. Allowable housing loads. TABLE C-9. Housing Capacity Chart (222XX SERIES) Static Capacity Fs Ratio 1:5 Timken Factor 180 Housing Capacity 180 Timken Factor 150 Housing Capacity 150 Timken Factor 1 Housing Capacity 1 Timken Factor 90 Housing Capacity 90 228 229 22210 22211 22212 22213 22214 22215 222 22217 22218 22219 222 22222 222 22226 22228 kn 99.7 200 108 0 118 26600 142 31900 174 39000 2 48600 231 500 0 54100 278 62500 3 71900 388 870 441 99000 502 113000 653 147000 772 174000 945 2100 1060 237000 0. 1 0. 1 0. 1 0. 1 0. 1 0. 1 0. 1 0. 1 0. 1 0. 1 0. 1 0. 1 0. 1 0. 1 0. 1 0. 1 0. 1 kn 4480 22 4840 53 28 6380 35 7800 43 97 46 10400 48 108 56 12500 64 14380 78 17440 88 19800 100 22600 131 29400 155 34800 188 400 211 47400 0.86 0.86 0.86 0.86 0.86 0.86 0.86 0.86 0.86 0.86 0.86 0.86 0.86 0.86 0.86 0.86 0.86 kn 17 3850 18 40 4570 5490 30 6710 37 8360 40 8940 41 9310 48 10750 55 12370 67 15000 76 17030 86 19440 112 25290 133 29930 2 36460 181 40760 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 kn 4480 22 4840 53 28 6380 35 7800 43 97 46 10400 48 108 56 12500 64 14380 78 17440 88 19800 100 22600 131 29400 155 34800 188 400 211 47400 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 kn 34 7750 37 8370 41 90 49 11040 60 13490 75 8 800 179990 83 187 96 230 111 880 134 30170 152 34250 174 39100 226 50860 268 600 326 73350 364 800 TABLE C-10. Housing Capacity Chart (232XX SERIES) Static Capacity Fs Ratio 1:5 Timken Factor 180 Housing Capacity 180 Timken Factor 150 Housing Capacity 150 Timken Factor 1 Housing Capacity 1 Timken Factor 90 Housing Capacity 90 23230 23234 kn 60 3700 20 494000 0.17 1 0.17 1 kn 281 630 373 83980 0.86 0.86 kn 2 54390 321 722 1 1 kn 281 630 373 83980 1.73 1.73 kn 486 109400 646 145290 C- TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering Normal Speed Ratings for Seals Normal Speed Ratings for Seals 50 1 15, 2 55 2 3, 2 1 4 60, 65 2 7, 2 1 2 70, 75 2 11, 2 3 4 2 15, 3 80, 85, 90 3 3, 3 1 4 3 7, 3 1 2 100 3 11, 3 3 4 3 15, 4 110, 115 4 7, 4 1 2 125, 130 4 15, 5 TABLE C-11. v-lock SErIES NOrMAL SEAL SPEED ratings (rpm) Oil Lubrication (1) s with contact seals will have higher operating temperatures than bearings with labyrinth seals. Grease Lubrication M/N Seal (1) T Seal B/C/O Seal (1) M/N Seal (1) T Seal B/C/O Seal (1) 22211 20 3800 1800 20 30 00 22212 22213 22214 22215 222 22217 22219 222 00 1800 1700 00 1500 1400 1300 10 3500 30 3050 2900 2650 00 20 00 50 1500 1400 1300 10 1100 1000 900 00 1800 1700 00 1500 1400 1300 10 3000 2800 2600 00 20 00 1800 00 22222 900 1700 600 900 10 600 222 22226 700 1500 400 700 1000 400 22228 650 10 350 650 900 350 1550 1500 1400 1300 1150 1100 950 900 TABLE C-12. CL SErIES NOrMAL SEAL SPEED ratings (rpm) 35 1 7, 1 1 2 40, 45 1 11, 1 3 4 50 1 15, 2 55 2 3, 2 1 4 60, 65 2 7, 2 1 2 70, 75 2 11, 2 3 4 2 15, 3 80, 85, 90 3 3, 3 1 4 3 7, 3 1 2 100 3 15, 4 110, 115 4 7, 4 1 2 125, 130 4 15, 5 Oil Lubrication Grease Lubrication M/N Seal (1) T Seal B/C/O Seal (1) M/N Seal (1) T Seal B/C/O Seal (1) 228 2700 4500 1950 2700 4000 1950 229 2700 4500 1950 2700 4000 1950 22210 00 40 1800 00 3550 1800 22211 20 3800 00 20 30 00 22213 1800 30 1500 1800 2800 1500 22215 00 2900 1300 00 00 1300 22218 1400 00 1000 1400 00 1000 222 10 00 900 10 00 900 22222 900 1700 600 900 10 600 22226 700 1500 400 700 1000 400 (1) s with contact seals will have higher operating temperatures than bearings with labyrinth seals. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-25

Engineering Normal Speed Ratings for Seals TABLE C-13. EC SErIES NOrMAL SEAL SPEED ratings (rpm) M/N Seal (1) Oil Lubrication T Seal B/C/O Seal (1) Grease Lubrication M/N Seal (1) T Seal B/C/O Seal (1) TABLE C-14. TA/Dv SErIES NOrMAL SEAL SPEED ratings (rpm) M/N Seal (1) Oil Lubrication T Seal B/C/O Seal (1) Grease Lubrication M/N Seal (1) T Seal B/C/O Seal (1) 35 1 7, 1 1 2 228 2700 4500 1950 2700 4000 1950 40 1 7, 1 1 2 229 2700 4500 1950 2700 4000 1950 40, 45 1 11, 1 3 4 229 2700 4500 1950 2700 4000 1950 45 1 11, 1 3 4 22210 00 40 1800 00 3550 1800 50 1 15, 2 22210 00 40 1800 00 3550 1800 50 1 15, 2 22211 20 3800 1800 20 30 00 55 2 3, 2 1 4 22211 20 3800 00 20 30 00 55 22212 00 3500 50 00 3000 1550 60, 65 2 7, 2 1 2 22213 1800 30 1500 1800 2800 1500 60 2 3, 2 1 4 22213 1800 30 1500 1800 2800 1500 70, 75 2 11, 2 3 4, 2 15, 3 22215 00 2900 1300 00 00 1300 65 2 7, 2 1 2 22215 00 2900 1300 00 00 1300 80, 85, 90 3 3, 3 1 4 3 7, 3 1 2 100 3 11, 3 3 4 3 15, 4 22218 1400 00 1000 1400 00 1000 222 10 00 900 10 00 900 70 2 11, 2 3 4 75 2 15, 3 80 3 3, 3 1 4 222 1500 2650 10 1500 20 1150 22217 1400 00 1100 1400 00 1100 22218 1400 00 1000 1400 00 1000 110,115 4 7, 4 1 2 22222 900 1700 600 900 10 600 85 22219 1300 20 1000 1300 1800 950 125, 130 4 15, 5 140, 150 5 7, 5 1 2 5 15, 6 22226 700 1500 400 700 1000 400 23230 650 950 350 600 800 350 90 3 7, 3 1 2 100 3 15, 4 222 10 00 900 10 00 900 22222 900 1700 600 900 10 600 170, 180 6 7, 6 1 2 6 15, 7 23234 600 900 350 600 800 350 (1) s with contact seals will have higher operating temperatures than bearings with labyrinth seals. 110 4 3, 4 1 4 115 4 7, 4 1 2 125 4 15, 5 222 800 00 500 800 1100 500 22226 700 1500 400 700 1000 400 22228 650 10 350 650 900 350 (1) s with contact seals will have higher operating temperatures than bearings with labyrinth seals. C-26 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering Normal Speed Ratings for Seals C 260 ( F) (500) 260 C (500 F) 4 (400) 4 C (400 F) 149 (300) 127 C (260 F) 93 (0) 93 C (0 F) 38 (100) 0 (32) -18 (0) -46 C (-50 F) -40 C (-40 F) -34 C (-30 F) -73 (-100) -73 C (-100 F) Nitrile Rubber (M, B) Polyurethane (O) DuPont Viton (N, C) DuPont Teflon (T) Fig. C-. Seal temperature ratings based on analytics. 50 55 30 10 9 10 5 5 DuPont TM is a trademark of E.I. du Pont de Nemours and Company. Teflon is a registered trademark of E.I. du Pont de Nemours and Company. Viton is a registered trademark of E.I. du Pont de Nemours and Company. Nitrile Rubber (M, B) DuPont Viton (N, C) DuPont Teflon (T) Polyurethane (O) Fig. C-17. Relative abrasion resistance ratings. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-27

Engineering Seal Material Chemical Compatibility Seal Material Chemical Compatibility A - Little to no effect B - Minor to moderate effect C - Severe effect to destruction N - No data test prior to use. Urethane Nitrile rubber DuPont Viton DuPont Teflon Acetaldehyde C C C A Acetamide N A B A Acetic Acid C B B A Acetic Anhydride C C C A Acetone C C C A Acetyl Bromide C N N N Acetyl Chloride C C A A Acetylene C A A A Adipic Acid A A N A Aero Shell Grease B A-B A A Aero Lubriplate A A A A Aero Safe 2300 N C C A Aerozine 50 N C C A Aluminum Acetate N A C A Aluminum Bromide N A A A Aluminum Chloride B A A A Aluminum Sulfate B A A A Aonia B B C A Aonium Carbonate B C N A Aonium Chloride N A A A Aonium Hydroxide B C A A Aonium Nitrate B A N A Aonium Persulfate B C N A Aonium Sulfate B A C A Aonium Sulfide B A C A Aonium Thiocyanate B N N A Aonium Acetate C N N A Amyl Acetate C C C A Amyl Alcohol C B C A Aniline C C C A Aniline Hydrochloride C B B B Animal Fats and Oils B A A A Antimony Salts B N N A Aqua Regia C C B A Arsenic Salts B N N A ASTM Oil #1 A A A A ASTM Oil #2 B A A A ASTM Oil #3 B A A A ASTM Reference Fuel A A A A A ASTM Reference Fuel B B B A A Atlantic Oil A A A A Barium Carbonate B A A A Barium Hydroxide A A A A Beer A A A A Benzaldehyde B C C A Benzene C C B A Benzoic Acid B C A A Black Sulphate Liquors N B A A A - Little to no effect B - Minor to moderate effect C - Severe effect to destruction N - No data test prior to use. Urethane Nitrile rubber DuPont Viton DuPont Teflon Bleach Solutions N C A B Boric Acid A A A A Brake Fluid N C C N Bromine B C A C Bunker Oil A A A A Butane A A A A Butyl Acetate C C C A Butyl Alcohol B A A A Calcium Carbonate B A A A Calcium Chloride A A A A Calcium Hydroxide A A A A Calcium Nitrate B A A A Calcium Sulfate B B B A Carbon Dioxide A A A A Carbon Disulfide B C A A Carbon Monoxide A A A A Carbon Tetrachloride C C A A Chlorine N C A B Chloroacetic Acid C C C N Chloroform C N N B Chromic Acid C C A B Chromium Potassium Sulfate A N N N Citric Acid B A A A Corn Oil A A A A Cottonseed Oil A A A A Cresol C C A A Crude Oil B B A A Cupric Chloride A B B A Cupric Nitrate B N N A Cupric Sulfate B B B A Cutting Oil B A A A Cyclohexane B A A A Cyclohexanone C C A A Dibutyl Phthalate C C C B Dichlorobenzene C N N B Diesel Fuel B A A A Diester Oil B B A A Dimethyl Acetamide C N N A Dimethyl Formamide C B C A Dodecyl Mercaptan B N N N DTE Oil B A N N Dubutyl Ether B C C N EP Lubes A A A A Esso #90 Lube Oil A A A A Ether B N N A Ethyl Acetate C C C A Ethyl Alcohol (Ethanol) C A C A Formic Acid C B C A DuPont TM is a trademark of E.I. du Pont de Nemours and Company. Teflon is a registered trademark of E.I. du Pont de Nemours and Company. Viton is a registered trademark of E.I. du Pont de Nemours and Company. DISCLAIMER: Every reasonable effort has been made to ensure the accuracy of the information in this writing, but no liability is accepted for errors, omissions or for any other reason. Continued on next page. C-28 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering Seal Material Chemical Compatibility Continued from previous page. A - Little to no effect B - Minor to moderate effect C - Severe effect to destruction N - No data test prior to use. Urethane Nitrile rubber DuPont Viton DuPont Teflon Freon, 12 or 113 A A B A Fuel Oil B A A A Gasoline B B A A Glucose A A A A Glue N A A A Glycerin A A A A Heptane A N N A Hexane A A A A Hydrazine C B C B Hydrobromic Acid B C A A Hydrocarbon Oil A A A A Hydrochloric Acid B C B A Hydrofluoric Acid B C C A Hydrogen A A A A Hydrogen Peroxide B C A B Hydrogen Sulfide C C C A Hydrologic Acid B N N N Iodine A B A A Isobutyl Alcohol N B A A Isopropyl Chloride N C A A Isopropyl Ether B B C N Isopropyl Alcohol (Propanol) B A A N JP4 Oil B A A A JP5 and 6 Oil C A A A Kerosene B A A A Lactic Acid B B A A Lead Acetate B B C A Linseed Oil B A A A Liquefied Petroleum Gas A A A N Lubrication Oil B A A A Lye N B B A Magnesium Chloride N A A A Magnesium Hydroxide A B A A Magnesium Salts B A A A Maleic Acid C C A A Mercury B A A A Methyl Alcohol (Methanol) A C A N Methyl Ethyl Ketone C C C A Methylene Chloride C C B A MIL-D-5606 Oil C A A A MIL-L7808 Oil B B A A Mineral Oil A A A A Mineral Spirits N B A A Naphthalene B C A A Natural Gas B A A A Nickel Salts C A A A Oxygen A B A A Ozone A C A A A - Little to no effect B - Minor to moderate effect C - Severe effect to destruction N - No data test prior to use. Urethane Nitrile rubber DuPont Viton DuPont Teflon Palmitic Acid A A A A Paint Thinner B C B A Peanut Oil A A A A Perchloric Acid C C A A Perchloroethylene C B A A Petroleum B A A A Phenol (Carbolic Acid) C C A A Phosphoric Acid C C A A Potassium Cyanide A A A A Potassium Salts B A A A Propane B A A A Propyl Alcohol B A A A Propylene Glycol B N N A Pydraul Oil C C A A SAE #10 Oil A A A A Seawater A A A A Silicic Acid B N N A Silver Nitrate B B A A Skydrol Oil C C C A Soap B A A A Sodium Acetate A B C A Sodium Bicarbonate B A A A Sodium Borate B A A A Sodium Carbonate B A A A Sodium Chloride B A A A Sodium Cyanide B A A A Sodium Hydrosulfite B N N A Sodium Hydroxide B B B A Sodium Hypochlorite C B A A Sodium Nitrate B B N A Sodium Silicate A A A A Sodium Sulfate B A A A Sodium Sulfide B A A A Steam C C C A Styrene B C B A Sulfur Dioxide B C A A Sulfuric Acid C C A A Tannic Acid A A A A Tartaric Acid A A A A Toluene C N N A Transformer Oil B N N A Turpentine C A A A Urea B N N A Varnish B B A A Water B A A A DuPont TM is a trademark of E.I. du Pont de Nemours and Company. Teflon is a registered trademark of E.I. du Pont de Nemours and Company. Viton is a registered trademark of E.I. du Pont de Nemours and Company. DISCLAIMER: Every reasonable effort has been made to ensure the accuracy of the information in this writing, but no liability is accepted for errors, omissions or for any other reason. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-29

Engineering Internal Radial Clearances Internal Radial Clearances TABLE C-15. v-lock SErIES (TAPErED BOrE, C3) M Clearance Max. TABLE C-. CL SErIES (STrAIGHT BOrE, C NOrMAL) Clearance M Max. 50 1 15, 2 22211 0.075 0.003 0.095 0.0037 35 1 7, 1 1 2 228 0.030 0.0012 0.045 0.0018 55 2 3, 2 1 4 22212 0.075 0.003 0.095 0.0037 40, 45 1 11, 1 3 4 229 0.035 0.0014 0.055 0.0022 55 2 3, 2 1 4 22213 0.075 0.003 0.095 0.0037 50 1 15, 2 22210 0.040 0.00 0.065 0.0026 60, 65 2 7, 2 1 2 22214 0.075 0.003 0.095 0.0037 55 2 3, 2 1 4 22211 0.040 0.00 0.065 0.0026 60, 65 2 7, 2 1 2 22215 0.075 0.003 0.095 0.0037 60, 65 2 7, 2 1 2 22213 0.040 0.00 0.065 0.0026 70, 75 2 11, 2 3 4, 2 15, 3 222 0.095 0.0037 0.1 0.0047 70, 75 2 11, 2 3 4, 2 15, 3 22215 0.050 0.002 0.080 0.0031 70, 75 2 11, 2 3 4, 2 15, 3 22217 0.095 0.0037 0.1 0.0047 80, 85, 90 3 3, 3 1 4, 3 7, 3 1 2 22218 0.060 0.00 0.100 0.0039 80, 85, 90 3 3, 3 1 4, 3 7, 3 1 2 22219 0.110 0.0043 0.140 0.0055 100 3 15, 4 222 0.075 0.003 0.1 0.0047 80, 85, 90 3 3, 3 1 4, 3 7, 3 1 2 222 0.110 0.0043 0.140 0.0055 110, 115 4 7, 4 1 2 22222 0.075 0.003 0.1 0.0047 100 3 11, 3 3 4, 3 15, 4 22222 0.135 0.0053 0.170 0.0067 125, 130 4 15, 5 22226 0.095 0.0037 0.145 0.0057 110 222 0.135 0.0053 0.170 0.0067 110, 115 4 7, 4 1 2 22226 0.135 0.0053 0.170 0.0067 125, 130 4 15, 5 22228 0.0 0.0063 0.0 0.0079 C-30 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering Internal Radial Clearances TABLE C-17. EC SErIES (STrAIGHT BOrE, C NOrMAL) M Clearance Max. M Clearance Max. 35 1 7, 1 1 2 228 0.030 0.0012 0.045 0.0018 80, 85, 90 3 3, 3 1 4 3 7, 3 1 2 22218 0.060 0.00 0.100 0.0039 40, 45 1 11, 1 3 4 229 0.0350 0.0014 0.055 0.0022 100 3 11, 3 3 4 3 15, 4 222 0.075 0.003 0.1 0.0047 50 1 15, 2 22210 0.040 0.00 0.065 0.0026 110, 115 4 7, 4 1 2 22222 0.075 0.003 0.1 0.0047 55 2 3, 2 1 4 22211 0.040 0.00 0.065 0.0026 125, 130 4 15, 5 22226 0.095 0.0037 0.145 0.0057 60, 65 2 7, 2 1 2 22213 0.040 0.00 0.065 0.0026 140, 150 5 7, 5 1 2 5 15, 6 23230 0.110 0.0043 0.170 0.0067 70, 75 2 11, 2 3 4 2 15, 3 22215 0.050 0.002 0.080 0.0031 170, 180 6 7, 6 1 2, 6 15, 7 23234 0.1 0.0047 0.180 0.0071 TABLE C-18. TA/Dv SErIES (TAPErED BOrE, C3) 40 1 7, 1 1 2 45 1 11, 1 3 4 50 1 15, 2 55 60 2 3, 2 1 4 65 2 7, 2 1 2 70 2 11, 2 3 4 75 2 15, 3 80 3 3, 3 1 4 85 90 3 7, 3 1 2 100 3 15, 4 110 4 3, 4 1 4 115 4 7, 4 1 2 125 4 15, 5 229 22210 22211 22212 22213 22215 222 22217 22218 22219 222 22222 222 22226 22228 Clearance Prior To Installation Recoended Reduction Of Internal Radial Clearance Recoended Axial Movement Of Adapter Sleeve M Max. M Max. M Max. 0.061 0.00 0.061 0.00 0.076 0.0030 0.076 0.0030 0.076 0.0030 0.094 0.0037 0.094 0.0037 0.109 0.0043 0.109 0.0043 0.109 0.0043 0.109 0.0043 0.135 0.0053 0.135 0.0053 0.0 0.0063 0.0 0.0063 0.079 0.0031 0.079 0.0031 0.094 0.0037 0.094 0.0037 0.094 0.0037 0.119 0.0047 0.119 0.0047 0.140 0.0055 0.140 0.0055 0.140 0.0055 0.140 0.0055 0.170 0.0067 0.170 0.0067 0.1 0.0079 0.1 0.0079 0.025 0.0010 0.025 0.0010 0.030 0.0012 0.030 0.0012 0.030 0.0012 0.038 0.0015 0.038 0.0015 0.046 0.0018 0.046 0.0018 0.046 0.0018 0.046 0.0018 0.051 0.00 0.051 0.00 0.064 0.0025 0.064 0.0025 0.030 0.0012 0.030 0.0012 0.038 0.0015 0.038 0.0015 0.038 0.0015 0.051 0.00 0.051 0.00 0.064 0.0025 0.064 0.0025 0.064 0.0025 0.064 0.0025 0.071 0.0028 0.071 0.0028 0.089 0.0035 0.089 0.0035 0.381 0.015 0.381 0.015 0.457 0.018 0.457 0.018 0.457 0.018 0.559 0.022 0.559 0.022 0.686 0.027 0.686 0.027 0.686 0.027 0.686 0.027 0.762 0.030 0.762 0.030 0.889 0.035 0.889 0.035 0.457 0.018 0.457 0.018 0.559 0.022 0.559 0.022 0.559 0.022 0.762 0.030 0.762 0.030 0.965 0.038 0.965 0.038 0.965 0.038 0.965 0.038 1.067 0.042 1.067 0.042 1.270 0.050 1.270 0.050 Minimum Internal 0.030 0.0012 0.030 0.0012 0.038 0.0015 0.038 0.0015 0.038 0.0015 0.043 0.0017 0.043 0.0017 0.051 0.00 0.051 0.00 0.051 0.00 0.051 0.00 0.064 0.0025 0.064 0.0025 0.076 0.0030 0.076 0.0030 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-31

Engineering ing ing When installing and using housed unit bearings, all shafting should be straight, clean, free from burrs and within the recoended shaft tolerances in tables C-19 and C- below. For applications that involve high speed or extreme vibration conditions, we recoend that all shafting be machined to onehalf the recoended tolerances below. Expansion Steel expands or contracts 0.0000113 millimeter per millimeter for each degree Celsius (0.0000063 inch per inch for each degree Fahrenheit) relative temperature increase or decrease respectively. Expansion bearings are used to accoodate thermal expansion of steel. Where the shafting and the framework on which the bearings and shafting are mounted are made from steel, the relative difference in expansion between the shaft and the framework will be minimal. In these conditions, fixed bearings can be used on both ends of the shaft. However, if there is a difference in material between the shaft and the framework, or if the application involves different temperatures from the shaft to the frame, then only one fixed bearing should be used on each shaft. All other bearings on the same shaft should be converted to floating to accoodate thermal expansion of the shaft. TABLE C-19. v-lock, CL AND EC SErIES recommended SHAFT TOLErANCES TABLE C-. TA/Dv SErIES recommended SHAFT TOLErANCES Tolerance Tolerance 35 1 7, 1 1 2 +0.00/-0.025 +0.00/-0.0010 40 1 7, 1 1 2 +0.00/-0.025 +0.00/-0.0010 40, 45 1 11, 1 3 4 +0.00/-0.038 + 0.00/-0.0015 45 1 11, 1 3 4 +0.00/-0.051 +0.00/-0.00 50 1 15, 2 +0.00/-0.038 + 0.00/-0.0015 50 1 15, 2 +0.00/-0.076 + 0.00/-0.0030 55 2 3, 2 1 4 +0.00/-0.038 + 0.00/-0.0015 55 +0.00/-0.076 60, 65 2 7, 2 1 2 +0.00/-0.038 + 0.00/-0.0015 60 2 3, 2 1 4 +0.00/-0.076 + 0.00/-0.0030 70, 75 2 11, 2 3 4, 2 15, 3 +0.00/-0.051 + 0.00/-0.00 65 2 7, 2 1 2 +0.00/-0.089 + 0.00/-0.0035 80, 85, 90 3 3, 3 1 4, 3 7, 3 1 2 +0.00/-0.076 + 0.00/-0.0030 70 2 11, 2 3 4 +0.00/-0.102 + 0.00/-0.0040 100 3 11, 3 3 4, 3 15, 4 +0.00/-0.076 + 0.00/-0.0030 75 2 15, 3 +0.00/-0.102 + 0.00/-0.0040 110, 115 4 7, 4 1 2 +0.00/-0.127 + 0.00/-0.0050 80 3 3, 3 1 4 +0.00/-0.102 + 0.00/-0.0040 125, 130 4 15, 5 +0.00/-0.127 + 0.00/-0.0050 85 +0.00/-0.102 140, 150 5 7, 5 1 2, 5 15, 6 +0.00/-0.127 + 0.00/-0.0050 90 3 7, 3 1 2 +0.00/-0.102 + 0.00/-0.0040 170, 180 6 7, 6 1 2, 6 15, 7 +0.00/-0.127 + 0.00/-0.0050 100 3 15, 4 +0.00/-0.102 + 0.00/-0.0040 110 4 3, 4 1 4 +0.00/-0.102 + 0.00/-0.0040 115 4 7, 4 1 2 +0.00/-0.102 + 0.00/-0.0040 125 4 15, 5 +0.00/-0.127 + 0.00/-0.0050 C-32 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering SHAFTING MISALIGNMENT LUBRICATION Number 228 229 22210 22211 22212 22213 22214 TABLE C-21. Amount of Float Per One Rotation of External Housing NuT Float 1.270 0.050 1.270 0.050 1.270 0.050 1.270 0.050 1.270 0.050 2.108 0.083 2.108 0.083 Number 22215 222 22217 22218 22219 222 22222 Float 2.108 0.083 2.108 0.083 2.108 0.083 2.108 0.083 2.108 0.083 2.108 0.083 2.108 0.083 Number 222 22226 22228 23230 23234 Float 2.108 0.083 2.108 0.083 2.108 0.083 2.108 0.083 2.108 0.083 Conversion from Fixed to Floating Housed unit bearings are easily converted from fixed to floating in the field (see the appropriate installation guide in this catalog for instructions). The following table will help you determine the amount of float for each bearing based on the number of revolutions the external housing nut is backed out. Misalignment Table C-22. Misalignment scale at ±1.5 degrees All spherical roller bearing housed units utilize self-aligning double-row spherical roller bearings. Because of this, the housed unit can accept up to ±1.5 degrees of misalignment. The performance life of our housed unit is not reduced while under misalignment conditions within these guidelines. It will accept both radial and thrust loads under static, oscillatory or dynamic load conditions. A m 0.305 1 1.5 5 B 15.951 0.628 79.756 3.140 A B Lubrication Timken is dedicated to using the highest quality components in everything we do. This is why we use premium industrial grease in spherical roller bearing solid-block housed units. The lithiumcomplex extreme-pressure grease combines the benefits of wide operating temperatures and broad compatibility. This grease offers excellent thermal stability through temperatures ranging from -34 C to 177 C (-30 F to 350 F). When dealing with temperatures above 149 C (300 F), consult your Timken engineer for optional grease recoendations. Application-specific lubrication options are also available ranging from Timken Food Safe Grease (aluminum-complex) to Timken Mill grease (calcium-sulfonate) along with many others. Fig. C-18. Misalignment. European REACH Compliance Timken lubricants, greases and similar products sold in standalone containers or delivery systems are subject to the European REACH (Registration, Evaluation, Authorization and Restriction of CHemicals) directive. For import into the European Union, Timken can sell and provide only those lubricants and greases that are registered with ECHA (European CHemical Agency). For further information, please contact your Timken engineer. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-33

Engineering Installation Guides V-Lock SERIES Installation Guides V-Lock Series Timken solid-block housed unit V-Lock bearings are easy to install and remove because of their unique adapters. Please complete the following steps to install and/or remove Timken steel housed unit V-Lock bearings. (Refer to fig. C-19.) Ensure that the shaft is clean, free from nicks and burrs, straight and of proper diameter. See table C- for recoended shaft tolerances. The housed unit should not be mounted on a worn section of the shaft. Using shafts with hardness greater than HRC 45 will reduce the effectiveness of locking devices. If using an open-end cover, slide the open-end cover/seal combination into position on the shaft. Remove the wedge assembly from the sleeve by unscrewing the wedge nut. See fig. C-19. Clean oil off of the sleeve and wedge. Apply a thin oil film to the shaft only. For QV single-nut housed units: Slide the sleeve, non-threaded end first, into position on the shaft. For QVV double-nut housed units: Make sure the sleeve nut is flush with the end of the sleeve. Slide the sleeve/nut assembly, nut end first, into position on the shaft. Slide the housed unit into place over the sleeve. Loosely install the housed unit mounting bolts. Check the housed unit alignment. Verify that the mounting surfaces are in the same flat plane to help achieve good alignment. If shiing is required to minimize misalignment, use full shims across the entire housing base where possible (fig. C-). Washers should be properly sized to bolt diameter and should not be an SAE grade, which is smaller. Seat the sleeve as best as possible into the mounted unit. Tighten the wedge assembly by turning the wedge nut clockwise until tight. Please note that it is designed to prevent overtightening. If installing a double-nut housed unit, tighten the sleeve assembly by turning the sleeve nut clockwise until snug. Tighten both the wedge nut and sleeve nut set screws alternately according to fig. C-19. Install the housed unit mounting bolts. Check the housed unit alignment. Verify that the mounting surfaces are in the same flat plane to achieve good alignment. If shiing is required to minimize misalignment, use full shims across the entire housing base where possible (fig. C-). The bolts then need to be alternately torqued securely to their mounting supports. Tighten the housing mounting bolts. HOUSING WEDGE WEDGE NUT INSERT WEDGE HOUSING WEDGE NUT INSERT SLEEVE SLEEVE SET SCREWS SLEEVE NUT * ONLY SUPPLIED WITH DOUBLE-NUT UNITS SET SCREWS Set screws Single-Nut QV Double-Nut QVV Fig. C-19. V-Lock insert components. C-34 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering Installation Guides V-Lock SERIES Table C-23. Set screw Torque Values Size Set Screw Size Torque Nm - SLV11 to SLV 3 8 - TPI 32.8 290 SLV22 7 - TPI 47.5 4 SLV to SLV28 1 2 - TPI 70.1 6 If using covers: Make sure the mating surface of the cover and retaining nuts are clean and dry. Urethane cover: slightly roughen the mating surface of the cover, place a 3 6 ( 1 8 1 4 ) bead of polyurethane adhesive sealant on the roughened surface. Steel cover: place a 3 6 ( 1 8 1 4 ) bead of silicone adhesive sealant on the mating surface of the cover. Align the cover mounting holes with the mounting holes on the retaining housing nut (make sure that the grease fitting on the cover is accessible when doing so). Apply and tighten the cover mounting hardware. WASHER WASHER SHIM Removal Remove covers, if applicable, by removing cover hardware and disengaging the cover from the housed unit retaining nut. Loosen the set screws on the wedge nut. Turn the wedge nut counterclockwise to remove the wedge from the locked position. Completely remove the wedge/wedge nut assembly. For QV housed units: Remove the bearing and sleeve from the shaft. For QVV housed units: Loosen the set screws on the sleeve nut. Turn the sleeve nut clockwise to un-seat the sleeve. Remove the bearing and sleeve/sleeve nut from the shaft. TABLE C-. Recoended shaft tolerances Tolerance 50 1 15, 2 55 2 3, 2 1 4 60, 65 2 7, 2 1 2 70, 75 2 11, 2 3 4, 2 15, 3 80, 85, 90 3 3, 3 1 4, 3 7, 3 1 2 100 3 11, 3 15, 4 110, 115 4 7, 4 1 2 125, 130 4 15, 5 22211 22212 22213 22214 22215 222 22217 22219 222 22222 +0.00/0.038 +0.00/-0.0015 +0.00/-0.051 +0.00/-0.00 +0.00/-0.076 +0.00/-0.0030 +0.00/-0.076 +0.00/-0.0030 222 22226 +0.00/-0.127 +0.00/-0.0050 22228 Fig. C-. Use washers and full shims. SHIM TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-35

Engineering Installation Guides V-Lock SERIES How to Convert a SOLID-BLOCK housed unit from Fixed to Expansion (floating) Flange Cartridge and Flange Block Make a reference mark on the housing and retaining nut. Loosen the Teflon-tipped set screw that locks the retaining nut in place. Loosen the retaining nut by tapping it with a haer and punch, rotating the retaining nut counterclockwise one complete revolution. Tighten the Teflon-tipped set screw. Pillow Block Decide the amount and direction of expansion that s needed. If unidirectional expansion is required, follow the directions outlined in the previous page for flange housed units on the nut that is on the side you want the expansion. If multi-directional expansion is required, follow the directions outlined in the previous section for both nuts on flange housed units. WARNING Failure to observe the following warnings could create a risk of death or serious injury. Proper maintenance and handling practices are critical. Always follow installation instructions and maintain proper lubrication. Overheated bearings can ignite explosive atmospheres. Special care must be taken to properly select, install, maintain, and lubricate housed unit bearings that are used in or near atmospheres that may contain explosive levels of combustible gases or accumulations of dust such as from grain, coal, or other combustible materials. Consult your equipment designer or supplier for installation and maintenance instructions. How to Convert a SOLID-BLOCK housed unit from Expansion (floating) to Fixed Flange Cartridge and Flange Block Loosen the Teflon-tipped set screw that locks the retaining nut in place. Tighten the retaining nut by tapping it with a haer and punch, rotating the retaining nut clockwise until it s tight. It is not possible to overtighten the retaining nut. Tighten the Teflon-tipped set screw. NOTE When converting a solid-block housed unit bearing from fixed to expansion, it is imperative that the unit that is going to be converted is correctly oriented. Since the insert in a steel housed unit flange bearing is held against either a shoulder or snap ring opposite the housing retaining nut, a flange bearing that has been converted to expansion can only float in the direction of the retaining nut. Based on this, the retaining nut must be on the side of the housing opposite the fixed bearing. Pillow Block Follow the directions above for flange housed units on both nuts on either side of the housing. NOTE When converting a solid-block housed unit from expansion to fixed on a mounted bearing, the locking-collar set screws must be released to allow the insert to move both in the housing and on the shaft. LUBRICATION This information is to aid in the proper lubrication of Timken spherical roller bearing solid-block housed units for the majority of applications. Housed units have been factory-prelubricated with an NLGI 2 lithium-complex, extreme-pressure synthetic grease that combines the benefits of wide operating temperatures and broad compatibility with varied materials. This grease offers excellent thermal stability through temperatures ranging from -40 C to 177 C (-40 F to 350 F). Housed units should be relubricated with this grease or one that is compatible and made for roller bearings. It is vital that the greases used are compatible. Please consult with your Timken engineer for the grease specifications if the use of a grease other than the grease mentioned above is needed. Normal service is considered as operation in a clean, dry environment at temperatures between -34 C to +82 C (-30 F to +180 F). If service is beyond normal conditions due to speed, temperature, or exposure to moisture, dirt or corrosive chemicals, C-36 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering Installation Guides V-Lock SERIES more frequent relubrication may be necessary. For extreme conditions or conditions in which special chemicals are used, consult with your Timken engineer. After extended storage or periods when the housed unit is not in operation, fresh grease should be added. It s important to have the right amount of lubrication, because it affects the housed unit bearing operating temperature as well. An inadequate amount of grease could lead to higher operating temperatures due to inadequate lubrication film thickness. Excessive grease also will lead to higher operating temperatures due to grease churning, which can cause bearing overheating. It is best to observe the bearing and its temperature and adjust the lubrication as needed. If necessary, use the purge valve or seals that purge to reduce the amount of grease. Relubrication Adequate lubrication is an essential element to the housed unit bearing life. Use table C-25 as a suggested initial point of reference. Relubrication frequency and quantity intervals are best determined through experience for each application, based on types of service, which may differ from the suggestions in the table. When the housed unit is not in operation for an extended period of time, grease should be added to prevent corrosion. Table C-25 shows general lubrication suggested starting points only. Please read the entire installation instructions prior to using these tables. Applications should be regularly reviewed and lubrication amounts and intervals modified as needed to ensure best results. NOTE Please check with the manufacturer of your grease delivery system for specific information. TABLE C-25. Relubrication Intervals Diameter Initial Weight Relubrication Weight Relubrication Interval (Hours of Service based on RPM and Temperature deg. F) 100 RPM 250 RPM 500 RPM 1000 RPM 00 RPM 3000 RPM <0 >0 <0 >0 <0 >0 <0 >0 <0 >0 <0 >0 g oz. g oz. 50 1 15, 2 22211 28.4 1 8.5 0.3 10 600 800 400 440 2 0 80 100 50 60 30 55 2 3, 2 1 4 22212 22213 34.0 1.2 36.9 1.3 8.5 0.3 11.3 0.4 1150 580 750 380 400 0 140 70 90 50 50 1130 570 740 370 380 190 130 65 85 45 45 60, 65 2 7, 2 1 2 22214 22215 39.7 1.4 56.7 2 11.3 0.4 14.2 0.5 11 560 7 360 360 180 1 60 80 40 40 1080 540 700 350 350 175 110 55 70 35 70, 75 2 11, 2 3 4 2 15, 3 222 22217 76.5 2.7 96.4 3.4 19.9 0.7 25.5 0.9 1040 5 680 340 340 170 100 50 60 30 1000 500 640 3 3 0 100 50 60 30 80, 85, 90 3 3, 3 1 4 3 7, 3 1 2 100 3 11, 3 3 4 3 15, 4 110, 115 4 7, 4 1 2 22219 222 22222 222 22226 104.9 3.7 184.3 6.5 9.8 7.4 260.8 9.2 300.5 10.6 25.5 0.9 45.4 1.6 53.9 1.9 68.0 2.4 76.5 2.7 960 480 600 300 300 150 80 40 40 840 4 5 260 0 1 70 35 30 18 680 340 440 2 0 100 60 30 640 3 400 0 180 90 50 25 560 280 360 180 0 80 125, 130 4 15, 5 22228 396.9 14 99.2 3.5 5 260 340 170 140 75 DISCLAIMER: Every reasonable effort has been made to ensure the accuracy of the information in this writing, but no liability is accepted for errors, omissions or for any other reason. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-37

Engineering Installation Guides CL Series CL Series Please complete the following steps to install Timken solid-block housed unit CL Series bearings. Ensure that the shaft is clean, free from nicks and burrs, straight and of proper diameter. See table C-26 for recoended shaft tolerances. The housed unit should not be mounted on a worn section of the shaft. Using shafts with hardness greater than HRC 45 will reduce the effectiveness of locking devices. If using an open-end cover, slide the open-end cover/seal combination into position on the shaft. Apply a thin oil film to the shaft and bearing bore. Slide the housed unit into position on the shaft. Install the housed unit mounting bolts. Check the housed unit alignment. Verify mounting surfaces are in the same flat plane to help achieve good alignment. If shiing is required to minimize misalignment, use full shims across the entire housing base where possible (fig. C-22). The bolts then need to be alternately torqued securely to their mounting supports. Tighten set screws alternately as per table C-27. Set screws in multiple units should be aligned to each other (fig. C-21). TABLE C-26. Recoended shaft tolerances Tolerance 35 1 7, 1 1 2 40, 45 1 11, 1 3 4 50 1 15, 2 55 2 3, 2 1 4 60, 65 2 7, 2 1 2 70, 75 2 11, 2 3 4 2 15, 3 80, 85, 90 3 3, 3 1 4 3 7, 3 1 2 100 3 15, 4 110, 115 4 7, 4 1 2 125, 130 4 15, 5 228 229 22210 22211 22213 22215 22218 222 22222 22226 +0.00/-0.025 +0.00/0.0010 +0.00/-0.038 +0.00/0.0015 +0.00/-0.038 +0.00/-0.0015 +0.00/-0.038 +0.00/-0.0015 +0.00/-0.038 +0.00/-0.0015 +0.00/-0.51 +0.00/-0.00 +0.00/-0.076 +0.00/-0.0030 +0.00/-0.076 +0.00/-0.0030 +0.00/-0.127 +0.00/-0.0050 +0.00/-0.127 +0.00/-0.0050 If using covers: Make sure the mating surface of the cover and retaining nuts are clean and dry. Urethane cover: slightly roughen the mating surface of the cover, place a 3 6 ( 1 8 1 4 ) bead of polyurethane adhesive sealant on the roughened surface. Steel cover: place a 3 6 ( 1 8 1 4 ) bead of silicone adhesive sealant on the mating surface of the cover. Align the cover mounting holes with the mounting holes on the retaining housing nut (make sure that the grease fitting on the cover is accessible when doing so). Apply and tighten the cover mounting hardware. Fig. C-21. Line up set screws in multiple units. WASHER WASHER Fig. C-22. Use washers and full shims. SHIM SHIM C-38 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering Installation Guides CL Series TABLE C-27. Set screw torque values Set Screw Size Torque 35 1 7, 1 1 2 40 1 11, 1 3 4 50 1 15, 2 55 2 3, 2 1 4 60, 65 2 7, 2 1 2 70, 75 2 11, 2 3 4 2 15, 3 80, 85, 90 3 3, 3 1 4 3 7, 3 1 2 100 3 15, 4 110, 115 4 7, 4 1 2 125, 130 4 15, 5 LUBRICATION 228 3 8 - TPI 229 3 8 - TPI 22210 3 8 - TPI 22211 3 8 - TPI 22213 1 2 - TPI 22215 1 2 - TPI 22218 1 2 - TPI 222-18TPI 22222-18TPI 22226-18TPI Nm - 32.8 290 32.8 290 32.8 290 32.8 290 70.1 6 70.1 6 70.1 6 149.7 1325 149.7 1325 149.7 1325 This information is to aid in the proper lubrication of Timken spherical roller bearing solid-block housed units for the majority of applications. Housed units have been factory-prelubricated with an NLGI 2 lithium-complex, extreme pressure synthetic grease that combines the benefits of wide operating temperatures and broad compatibility with varied materials. This grease offers excellent thermal stability through temperatures ranging from -40 C to 177 C (-40 F to 350 F). Housed units should be relubricated with this grease or one that is compatible and made for roller bearings. It is vital that the greases used are compatible. Please consult with your Timken engineer for the grease specifications if the use of a grease other than the grease mentioned above is needed. Normal service is considered as operation in a clean, dry environment at temperatures between -34 C to +82 C (-30 F to +180 F). If service is beyond normal conditions due to speed, temperature, or exposure to moisture, dirt or corrosive chemicals, periodic relubrication may be necessary. For extreme conditions or conditions in which special chemicals are used, consult with your Timken engineer. After extended storage or periods when the housed unit is not in operation, fresh grease should be added. It s important to have the right amount of lubrication, because it affects the housed unit bearing operating temperature as well. An inadequate amount of grease could lead to higher operating temperatures due to inadequate lubrication film thickness. Excessive grease also will lead to higher operating temperatures due to grease churning, which can cause bearing overheating. It is best to observe the bearing and its temperature and adjust the lubrication as needed. If necessary, use the purge valve or seals that purge to reduce the amount of grease. NOTE Please check with the manufacturer of your grease delivery system for specific information. WARNING Failure to observe the following warnings could create a risk of death or serious injury. Proper maintenance and handling practices are critical. Always follow installation instructions and maintain proper lubrication. Overheated bearings can ignite explosive atmospheres. Special care must be taken to properly select, install, maintain, and lubricate housed unit bearings that are used in or near atmospheres that may contain explosive levels of combustible gases or accumulations of dust such as from grain, coal, or other combustible materials. Consult your equipment designer or supplier for installation and maintenance instructions. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-39

Engineering Installation Guides CL Series Relubrication Adequate lubrication is an essential element to the housed unit bearing life. Use table C-28 as a suggested initial point of reference. Relubrication frequency and quantity intervals are best determined through experience for each application based on types of service, which may differ from the suggestions in the table. When the housed unit is not in operation for an extended period of time, grease should be added to prevent corrosion. Table C-28 shows general lubrication suggested starting points only. Please read the entire installation instructions prior to using these tables. Applications should be regularly reviewed and lubrication amounts and intervals modified as needed to ensure the best results. TABLE C-28. ReLubrication Intervals Initial Weight g oz. Relubrication Weight g oz. Relubrication Interval (Hours of Service based on RPM and Temperature deg. F) 100 RPM 250 RPM 500 RPM 1000 RPM 00 RPM 3000 RPM <0 >0 <0 >0 <0 >0 <0 >0 <0 >0 <0 >0 35 1 7, 1 1 2 228 14.2 0.5 2.4 0.1 20 1000 1400 700 1000 500 0 1 1 60 40 40, 45 1 11, 1 3 4 229 317.5 0.7 5.7 0.2 00 1000 10 600 800 400 3 0 0 80 80 40 50 1 15, 2 22210 22.7 0.8 5.7 0.2 00 800 1000 500 640 3 0 1 1 60 60 30 55 2 3, 2 1 4 22211 28.4 1 8.5 0.3 10 600 800 400 440 2 0 80 100 50 60 30 60, 65 2 7, 2 1 2 22213 39.7 1.4 11.3 0.4 11 560 7 360 360 180 1 60 80 40 40 70, 75 2 11, 2 3 4 2 15, 3 22215 76.5 2.7 19.4 0.7 1040 5 680 340 340 170 100 50 60 30 80, 85, 90 3 3, 3 1 4 3 7, 3 1 2 22218 104.9 3.7 25.5 0.9 960 480 600 300 300 150 80 40 40 100 3 15, 4 222 184.3 6.5 45.4 1.6 840 4 5 260 0 1 60 30 110, 115 4 7, 4 1 2 22222 9.8 7.4 53.9 1.9 680 340 440 2 0 100 60 30 125, 130 4 15, 5 22226 300.5 10.6 76.5 2.7 560 280 360 180 0 80 DISCLAIMER: Every reasonable effort has been made to ensure the accuracy of the information in this writing, but no liability is accepted for errors, omissions or for any other reason. C-40 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering Installation Guides CL Series How to Convert a SOLID-BLOCK housed unit from Fixed to Expansion (floating) Flange Cartridge and Flange Block Make a reference mark on the housing and retaining nut. Loosen the Teflon-tipped set screw that locks the retaining nut in place. Loosen the retaining nut by tapping it with a haer and punch, rotating the retaining nut counterclockwise one complete revolution. Tighten the Teflon-tipped set screw. NOTE When converting a solid-block housed unit bearing from fixed to expansion, it is imperative that the unit that is going to be converted is correctly oriented. Since the insert in a steel housed unit flange bearing is held against either a shoulder or snap ring opposite the housing retaining nut, a flange bearing that has been converted to expansion can only float in the direction of the retaining nut. Based on this, the retaining nut must be on the side of the housing opposite the fixed bearing. Pillow Block Decide the amount and direction of expansion that s needed. If unidirectional expansion is required, follow the directions outlined above for flange bearings on the nut that is on the side you want the expansion. If multi-directional expansion is required, follow the directions as outlined above for both nuts on flange housed units. How to Convert a SOLID-BLOCK housed unit from Expansion (floating) to Fixed Flange Cartridge and Flange Block Loosen the Teflon-tipped set screw that locks the retaining nut in place. Tighten the retaining nut by tapping it with a haer and punch, rotating the retaining nut clockwise until it s tight. It is not possible to overtighten the retaining nut. Tighten the Teflon-tipped set screw. Pillow Block Follow the directions above for flange bearings on both nuts on either side of the housing. NOTE When converting a solid-block housed unit from expansion to fixed on a mounted bearing, the locking-collar set screws must be released to allow the insert to move both in the housing and on the shaft. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-41

Engineering Installation Guides EC Series EC Series Please complete the following steps to install Timken EC series spherical roller bearing solid-block housed units. Ensure that the shaft is clean, free from nicks and burrs, straight and of proper diameter. See table C-29 for recoended shaft tolerances. The housed unit should not be mounted on a worn section of the shaft. Using shafts with hardness greater than HRC 45 will reduce the effectiveness of locking devices. If using an open-end cover, slide the open-end cover/seal combination into position on the shaft. Apply a thin oil film to the shaft and bearing bore. Slide the housed unit into position on the shaft. Install the housed unit mounting bolts. Check the housed unit alignment. Verify that the mounting surfaces are in the same flat plane to help achieve good alignment. If shiing is required to minimize misalignment, use full shims across the entire housing base where possible (fig. C-23). The bolts then need to be alternately torqued securely to their mounting supports. Slide the eccentric locking collar along shaft and onto the extended portion of the bearing s inner ring. Rotate the eccentric locking collar until it is hand-tight (the direction of rotation does not matter). Lock the eccentric locking collar firmly in place by using a spanner wrench or a haer and drift. When using a haer and drift, one or two firm, but not too hard, blows will be sufficient due to the shallow eccentric ramp on EC series housed units. Make sure you drive the collar in the same direction in which you hand-tightened it so as to turn it to a tighter position on the bearing s inner ring. Tighten the eccentric locking collar set screws alternately as per table C-30. WASHER WASHER SHIM SHIM Fig. C-23. Use washers and full shims. C-42 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering Installation Guides EC Series If using covers: Make sure the mating surface of the cover and retaining nuts are clean and dry. Urethane cover: slightly roughen the mating surface of the cover, place a 3 6 ( 1 8 1 4 ) bead of polyurethane adhesive sealant on the roughened surface. Steel cover: place a 3 6 ( 1 8 1 4 ) bead of silicone adhesive sealant on the mating surface of the cover. Align the cover mounting holes with the mounting holes on the retaining housing nut (make sure that the grease fitting on the cover is accessible when doing so). Apply and tighten the cover mounting hardware. TABLE C-29. Recoended shaft tolerances Tolerance TABLE C-30. Set screw torque values Set Screw Size Torque Nm - 35 1 7, 1 1 2 228 +0.00/-0.025 +0.00/-0.0010 35 1 7, 1 1 2 228 3 8-TPI 32.8 290 40, 45 1 11, 1 3 4 229 +0.00/-0.038 +0.00/-0.0015 40, 45 1 11, 1 3 4 229 3 8-TPI 32.8 290 50 1 15, 2 22210 +0.00/-0.038 +0.00/-0.0015 50 1 15, 2 22210 3 8-TPI 32.8 290 55 2 3, 2 1 4 22211 +0.00/-0.038 +0.00/-0.0015 55 2 3, 2 1 4 22211 3 8-TPI 32.8 290 60, 65 2 7, 2 1 2 22213 +0.00/-0.038 +0.00/-0.0015 60, 65 2 7, 2 1 2 22213 7 -TPI 48.6 430 70, 75 2 11, 2 3 4 2 15, 3 22215 +0.00/-0.051 +0.00/-0.00 70, 75 2 11, 2 3 4 2 15, 3 22215 7 -TPI 48.6 430 80, 85, 90 3 3, 3 1 4 3 7, 3 1 2 22218 +0.00/-0.076 +0.00/-0.0030 80, 85, 90 3 3, 3 1 4 3 7, 3 1 2 22218 7 -TPI 48.6 430 100 3 11, 3 3 4 3 15, 4 222 +0.00/-0.076 +0.00/-0.0030 100 3 11, 3 3 4 3 15, 4 222 9-18TPI 70.1 6 110, 115 4 7, 4 1 2 22222 +0.00/-0.127 +0.00/-0.0050 110, 115 4 7, 4 1 2 22222-18TPI 149.7 1325 125, 130 4 15, 5 22226 +0.00/-0.127 +0.00/-0.0050 125, 130 4 15, 5 22226-18TPI 149.7 1325 140, 150 5 7, 5 1 2 5 15, 6 23230 +0.00/-0.127 +0.00/-0.0050 140, 150 5 7, 5 1 2 5 15, 6 23230-18TPI 149.7 1325 170, 180 6 7, 6 1 2 6 15, 7 23234 +0.00/-0.127 +0.00/-0.0050 170, 180 6 7, 6 1 2 6 15, 7 23234-18TPI 149.7 1325 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-43

Engineering Installation Guides EC Series LUBRICATION This information is to aid in the proper lubrication of Timken spherical roller bearing solid-block housed units for the majority of applications. Housed units have been factory-prelubricated with an NLGI 2 lithium-complex, extreme-pressure synthetic grease that combines the benefits of wide operating temperatures and broad compatibility with varied materials. This grease offers excellent thermal stability through temperatures ranging from -40 C to 177 C (-40 F to 350 F). Housed units should be relubricated with this grease or one that is compatible and made for roller bearings. It is vital that the greases used are compatible. Please consult with your Timken engineer for the grease specifications if the use of a grease other than the grease mentioned above is needed. Normal service is considered as operation in a clean, dry environment at temperatures between -34 C to +82 C (-30 F to +180 F). If service is beyond normal conditions due to speed, temperature, or exposure to moisture, dirt or corrosive chemicals, periodic relubrication may be necessary. For extreme conditions or conditions in which special chemicals are used, consult with your Timken engineer. After extended storage or periods when the housed unit is not in operation, fresh grease should be added. It s important to have the right amount of lubrication, because it affects the housed unit bearing operating temperature as well. An inadequate amount of grease could lead to higher operating temperatures due to inadequate lubrication film thickness. Excessive grease also will lead to higher operating temperatures due to grease churning, which can cause bearing overheating. It is best to observe the bearing and its temperature and adjust the lubrication as needed. If necessary, use the purge valve or seals that purge to reduce the amount of grease. NOTE Please check with the manufacturer of your grease delivery system for specific information. Relubrication Adequate lubrication is an essential element to the housed unit bearing life. Use table C-31 as a suggested initial point of reference. Relubrication frequency and quantity intervals are best developed through experience for each application based on types of service, which may differ from the suggestions in the table. When the housed unit is not in operation for an extended period of time, grease should be added to prevent corrosion. Table C-31 shows general lubrication suggested starting points only. Please read the entire installation instructions prior to using these tables. Applications should be regularly reviewed and lubrication amounts and intervals modified as needed to ensure the best results. WARNING Failure to observe the following warnings could create a risk of death or serious injury. Proper maintenance and handling practices are critical. Always follow installation instructions and maintain proper lubrication. Overheated bearings can ignite explosive atmospheres. Special care must be taken to properly select, install, maintain, and lubricate housed unit bearings that are used in or near atmospheres that may contain explosive levels of combustible gases or accumulations of dust such as from grain, coal, or other combustible materials. Consult your equipment designer or supplier for installation and maintenance instructions. DISCLAIMER Every reasonable effort has been made to ensure the accuracy of the information in this writing, but no liability is accepted for errors, omissions or for any other reason. C-44 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering Installation Guides EC Series TABLE C-31. Relubrication Intervals Initial Weight g oz. Relubrication Weight g oz. Relubrication Interval (Hours of Service based on RPM and Temperature deg. F) 100 RPM 250 RPM 500 RPM 1000 RPM 00 RPM 3000 RPM <0 >0 <0 >0 <0 >0 <0 >0 <0 >0 <0 >0 35 1 7, 1 1 2 228 14.2 0.5 2.8 0.1 20 1000 1400 700 1000 500 0 1 1 60 40 40, 45 1 11, 1 3 4 229 19.9 0.7 5.7 0.2 00 1000 10 600 800 400 3 0 0 80 80 40 50 1 15, 2 22210 22.7 0.8 5.7 0.2 00 800 1000 500 640 3 0 1 1 60 60 30 55 2 3, 2 1 4 22211 28.4 1 8.5 0.3 10 600 800 400 440 2 0 80 100 50 60 30 60, 65 2 7, 2 1 2 22213 39.7 1.4 11.3 0.4 11 560 7 360 360 180 1 60 80 40 40 70, 75 2 11, 2 3 4 2 15, 3 22215 76.5 2.7 19.8 0.7 1040 5 680 340 340 170 100 50 60 30 80, 85, 90 3 3, 3 1 4 3 7, 3 1 2 22218 104.9 3.7 25.5 0.9 960 480 600 300 300 150 80 40 40 100 3 11, 3 3 4 3 15, 4 222 184.3 6.5 45.4 1.6 840 4 5 260 0 1 60 30 110, 115 4 7, 4 1 2 22222 9.8 7.4 53.9 1.9 680 340 440 2 0 100 60 30 125, 130 4 15, 5 22226 300.5 10.6 76.5 2.7 560 280 360 180 0 80 140, 150 5 7, 5 1 2 5 15, 6 23230 589.7.8 147.4 5.2 480 0 3 0 1 68 170,180 6 7, 6 1 2 6 15, 7 23234 85.0 30.0 1.0 8.5 400 0 0 0 110 60 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-45

Engineering Installation Guides EC Series How to Convert A SOLID-BLOCK housed unit from Fixed to Expansion (floating) Flange Cartridge and Flange Block Make a reference mark on the housing and retaining nut. Loosen the Teflon-tipped set screw that locks the retaining nut in place. Loosen the retaining nut by tapping it with a haer and punch, rotating the retaining nut counterclockwise one complete revolution. Tighten the Teflon-tipped set screw. NOTE When converting a solid-block housed unit bearing from fixed to expansion, it is imperative that the unit that is going to be converted is correctly oriented. Since the insert in a steel housed unit flange bearing is held against either a shoulder or snap ring opposite the housing retaining nut, a flange bearing that has been converted to expansion can only float in the direction of the retaining nut. Based on this, the retaining nut must be on the side of the housing opposite the fixed bearing. How to Convert A SOLID-BLOCK housed unit from Expansion (floating) to Fixed Flange Cartridge and Flange Block Loosen the Teflon-tipped set screw that locks the retaining nut in place. Tighten the retaining nut by tapping it with a haer and punch, rotating the retaining nut clockwise until it s tight. It is not possible to overtighten the retaining nut. Tighten the Teflon-tipped set screw. Pillow Block Follow the directions above for flange bearings on both nuts on either side of the housing. NOTE When converting a solid-block housed unit from expansion to fixed on a mounted bearing, the locking collar set screws must be released to allow the insert to move both in the housing and on the shaft. Pillow Block Decide the amount and direction of expansion that s needed. If unidirectional expansion is required, follow the directions outlined above for flange bearings on the nut that is on the side you want the expansion. If multi-directional expansion is required, follow the directions outlined above for both nuts on flange housed units. C-46 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering Installation Guides TA/DV Series TA/DV Series Choose one of the following two methods for installing your housed unit depending on your situation. Timken recoends the axial drive-up method for most applications. If your application is not as critical, the simpler tang counting method is fine. Axial Drive-Up Method Clean all components of any debris and apply a thin oil film to all mating surfaces to ensure proper seating. If using an open-end cover, slide the open-end cover/seal combination into position on the shaft. Slide the adapter sleeve into position on the shaft, then put the housed unit into place on the adapter sleeve. Loosely install the housed unit mounting bolts. Check the housed unit alignment. Verify mounting surfaces are in the same flat plane to help achieve good alignment. If shiing is required to minimize misalignment, use full shims across the entire housing base where possible (fig. C-). Washers should be properly sized to the bolt diameter and should not be an SAE grade, which is smaller. Put the lockwasher on and thread the locknut onto the adapter sleeve leaving approximately 6.350 (¼ ) between the lockwasher and the inner ring of the bearing. Use a large screwdriver or pry bar to lever the sleeve into position until there is no relative movement between the shaft, the adapter sleeve, and the bearing s inner ring. Rotate the locknut until hand-tight. Tighten the locknut while using a dial indicator to measure the axial movement of the tapered adapter sleeve relative to the bearing s inner ring (see table C-32). Bend a tang on the lockwasher into a slot on the locknut to prevent the locknut from loosening. Tighten the housed unit mounting bolts. If using covers: Make sure the mating surface of the cover and retaining nuts are clean and dry. Urethane cover: slightly roughen the mating surface of the cover, place a 3 6 ( 1 8 1 4 ) bead of polyurethane adhesive sealant on the roughened surface. Steel cover: place a 3 6 ( 1 8 1 4 ) bead of silicone adhesive sealant on the mating surface of the cover. Align the cover mounting holes with the mounting holes on the retaining housing nut (make sure that the grease fitting on the cover is accessible when doing so). Apply and tighten the cover mounting hardware. TABLE C-32. Axial Movement of Tapered Adapter Sleeve Relative to Inner Ring 40 1 7, 1 1 2 45 1 11, 1 3 4 50 1 15, 2 55 60 2 3, 2 1 4 65 2 7, 2 1 2 70 2 11, 2 3 4 75 2 15, 3 80 3 3, 3 1 4 85 90 3 7, 3 1 2 100 3 15, 4 110 4 3, 4 1 4 115 4 7, 4 1 2 125 4 15, 5 229 22210 22211 22212 22213 22215 222 22217 22218 22219 222 22222 222 22226 22228 Minimum Axial Movement 0.38 0.015 0.38 0.015 0.46 0.018 0.46 0.018 0.46 0.018 0.64 0.025 0.64 0.025 0.69 0.027 0.69 0.027 0.69 0.027 0.69 0.027 0.76 0.030 0.76 0.030 0.89 0.035 0.89 0.035 Maximum Axial Movement 0.46 0.018 0.46 0.018 0.56 0.022 0.56 0.022 0.56 0.022 0.76 0.030 0.76 0.030 0.97 0.038 0.97 0.038 0.97 0.038 0.97 0.038 1.07 0.042 1.07 0.042 1.27 0.050 1.27 0.050 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-47

Engineering Installation Guides TA/DV Series Tang Counting Method Clean all components of any debris and apply a thin oil film to all mating surfaces to ensure proper seating. If using an open-end cover, slide the open-end cover/seal combination into position on the shaft. Slide the adapter sleeve into the correct position on the shaft, then put the housed unit into place on the adapter sleeve. Loosely install the housed unit mounting bolts. Check the housed unit alignment. Verify mounting surfaces are in the same flat plane to help achieve good alignment. If shiing is required to minimize misalignment, use full shims across the entire housing base where possible (fig. C-). Washers should be properly sized to the bolt diameter and should not be an SAE grade, which is smaller. Put the lockwasher on and thread the locknut onto the adapter sleeve, leaving approximately ¼ between the lockwasher and the inner ring of the bearing. Use a large screwdriver or pry bar to lever the sleeve into position until there is no relative movement between the shaft, the adapter sleeve and the bearing s inner ring. Rotate the locknut until hand-tight. Note which tang is in line with one slot on the locknut. Tighten the locknut until the slot on the locknut passes the number of tangs shown in table C-33. Bend a tang on the lockwasher into a slot on the locknut to prevent the locknut from loosening. Tighten the housed unit mounting bolts. If using covers: Make sure the mating surface of the cover and retaining nuts are clean and dry. Urethane cover: slightly roughen the mating surface of the cover, place a 3 6 ( 1 8 1 4 ) bead of polyurethane adhesive sealant on the roughened surface. Steel cover: place a 3 6 ( 1 8 1 4 ) bead of silicone adhesive sealant on the mating surface of the cover. Align the cover mounting holes with the mounting holes on the retaining housing nut (make sure that the grease fitting on the cover is accessible when doing so). Apply and tighten the cover mounting hardware. WASHER WASHER SHIM SHIM Fig. C-. Use washers and full shims. C-48 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering Installation Guides TA/DV Series TABLE C-33. Number of Tangs to Locking Number of Tangs 40 1 7, 1 1 2 45 1 11, 1 3 4 50 1 15, 2 55 60 2 3, 2 1 4 65 2 7, 2 1 2 70 2 11, 2 3 4 75 2 15, 3 80 3 3, 3 1 4 85 90 3 7, 3 1 2 100 3 15, 4 110 4 3, 4 1 4 115 4 7, 4 1 2 125 4 15, 5 229 3-4 22210 3-4 22211 4-5 22212 4-5 22213 4-5 22215 5-6 222 5-6 22217 8-9 22218 8-9 22219 8-9 222 8-9 22222 10-11 222 10-11 22226 10-11 22228 10-11 LUBRICATION This information is to aid in the proper lubrication of Timken spherical roller bearing solid-block housed units for the majority of applications. Housed units have been factory-prelubricated with an NLGI 2 lithium-complex, extreme-pressure synthetic grease that combines the benefits of wide operating temperatures and broad compatibility with varied materials. This grease offers excellent thermal stability through temperatures ranging from -40 C to 177 C (-40 F to 350 F). Housed units should be relubricated with this grease or one that is compatible and made for roller bearings. It is vital that the greases used are compatible. Please consult with your Timken engineer for the grease specifications if the use of a grease other than the grease mentioned above is needed. Normal service is considered as operation in a clean, dry environment at temperatures between -34 C to +82 C (-30 F to +180 F). If service is beyond normal conditions due to speed, temperature or exposure to moisture, dirt or corrosive chemicals, periodic relubrication may be necessary. For extreme conditions or conditions in which special chemicals are used, consult with your Timken engineer. After extended storage or periods when the housed unit is not in operation, fresh grease should be added. It s important to have the right amount of lubrication, because it affects the housed unit bearing operating temperature as well. An inadequate amount of grease could lead to higher operating temperatures due to inadequate lubrication film thickness. Excessive grease will lead to higher operating temperatures due to grease churning, which can cause bearing overheating. It is best to observe the bearing and its temperature and adjust the lubrication as needed. If necessary, use the purge valve or seals that purge to reduce the amount of grease. NOTE Please check with the manufacturer of your grease delivery system for specific information. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-49

Engineering Installation Guides TA/DV Series Relubrication Adequate lubrication is an essential element to the housed unit bearing life. Use table C-34 as a suggested initial point of reference. Relubrication frequency and quantity intervals are best determined through experience for each application based on types of service, which may differ from the suggestions in the table. When the housed unit is not in operation for an extended period of time, grease should be added to prevent corrosion. Table C-34 shows general lubrication suggested starting points only. Please read the entire installation instructions prior to using these tables. Applications should be regularly reviewed and lubrication amounts and intervals modified as needed to ensure the best results. TABLE C-34. Relubrication Intervals WARNING Failure to observe the following warnings could create a risk of death or serious injury. Proper maintenance and handling practices are critical. Always follow installation instructions and maintain proper lubrication. Overheated bearings can ignite explosive atmospheres. Special care must be taken to properly select, install, maintain, and lubricate housed unit bearings that are used in or near atmospheres that may contain explosive levels of combustible gases or accumulations of dust such as from grain, coal, or other combustible materials. Consult your equipment designer or supplier for installation and maintenance instructions. Initial Weight g oz. Relubrication Weight g oz. Relubrication Interval (Hours of Service based on RPM and Temperature deg. F) 100 RPM 250 RPM 500 RPM 1000 RPM 00 RPM 3000 RPM <0 >0 <0 >0 <0 >0 <0 >0 <0 >0 <0 >0 40 1 7, 1 1 2 229 19.8 0.7 5.7 0.2 00 1000 10 600 800 400 3 0 0 80 80 40 45 1 11, 1 3 4 22210 22.7 0.8 5.7 0.7 00 800 1000 500 640 3 0 1 1 60 60 30 50 1 15, 2 22211 28.4 1.0 8.5 0.3 10 600 800 400 440 2 0 80 100 50 60 30 55 22212 34.0 1.2 8.5 0.3 1150 580 750 380 400 0 140 70 90 50 50 60 2 3, 2 1 4 22213 39.7 1.4 11.3 0.4 11 560 7 360 360 180 1 60 80 40 40 65 2 7, 2 1 2 22215 76.5 2.7 19.8 0.7 1040 5 680 340 340 170 100 50 60 30 70 2 11, 2 3 4 222 76.5 2.7 19.8 0.7 1040 5 680 340 340 170 10 50 60 30 75 2 15, 3 22217 96.4 3.4 25.5 0.9 1000 500 640 3 3 0 100 50 60 30 80 3 3, 3 1 4 22218 104.9 3.7 25.5 0.9 960 480 600 300 300 150 80 40 40 85 22219 104.9 3.7 25.5 0.9 960 480 600 300 300 150 80 40 40 90 3 7, 3 1 2 222 184.3 6.5 45.4 1.6 840 4 5 260 0 1 60 30 100 3 15, 4 22222 9.8 7.4 53.9 1.9 680 340 440 2 0 100 60 30 110 4 3, 4 1 4 222 260.8 9.2 68.0 2.4 640 3 400 0 180 90 50 25 115 4 7, 4 1 2 22226 340.2 12.0 85.0 3.0 600 300 360 180 0 80 40 125 4 15, 5 22228 396.9 14.0 99.2 3.5 5 260 340 170 140 75 DISCLAIMER: Every reasonable effort has been made to ensure the accuracy of the information in this writing, but no liability is accepted for errors, omissions or for any other reason. C-50 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Engineering Installation Guides TA/DV Series How to Convert a SOLID-BLOCK housed unit from Fixed to Expansion (floating) Flange Cartridge and Flange Block Make a reference mark on the housing and retaining nut. Loosen the Teflon-tipped set screw that locks the retaining nut in place. Loosen the retaining nut by tapping it with a haer and punch, rotating the retaining nut counterclockwise one complete revolution. Tighten the Teflon-tipped set screw. NOTE When converting a solid-block housed unit bearing from fixed to expansion, it is imperative that the unit that is going to be converted is correctly oriented. Since the insert in a steel housed unit flange bearing is held against either a shoulder or snap ring opposite the housing retaining nut, a flange bearing that has been converted to expansion can only float in the direction of the retaining nut. Based on this, the retaining nut must be on the side of the housing opposite the fixed bearing. How to Convert a SOLID-BLOCK housed unit from Expansion (floating) to Fixed Flange Cartridge and Flange Block Loosen the Teflon-tipped set screw that locks the retaining nut in place. Tighten the retaining nut by tapping it with a haer and punch, rotating the retaining nut clockwise until tight. It is not possible to overtighten the retaining nut. Tighten the Teflon-tipped set screw. Pillow Block Follow the directions above for flange bearings on both nuts on either side of the housing. NOTE When converting a solid-block housed unit from expansion to fixed on a mounted bearing, the locking-collar set screws must be released to allow the insert to move both in the housing and on the shaft. Pillow Block Decide the amount and direction of expansion that s needed. If unidirectional expansion is required, follow the directions outlined above for flange bearings on the nut that is on the side you want the expansion. If multi-directional expansion is required, follow the directions above for both nuts on flange housed units. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-51

SPHERICAL ROLLER BEARING SOLID-BLOCK HOUSED UNITS C-52 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

SPHERICAL ROLLER BEARING Solid-Block SOLID-BLOCK Housed HOUSED units UNITS SPHERICAL ROLLER BEARING SOLID-BLOCK HOUSED UNITS SPHERICAL ROLLER BEARING SOLID-BLOCK HOUSED UNITS PRODUCT DATA TABLES When your equipment faces harsh environments, you need spherical roller bearing solid-block housed units rugged enough to withstand tough conditions and deliver exceptional performance. You gain both with Timken spherical roller bearing solid-block housed units. Nomenclatures..................................... C-54 Seal and Cover Options.............................. C-59 V-Lock Series (double taper lock).................... C-73 CL Series (concentric [set screw] lock)................ C-99 EC Series (eccentric lock).......................... C-129 TA/DV Series (tapered adapter lock)................. C-153 Take-Up Frames................................... C-9 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-53

SPHERICAL ROLLER BEARING SOLID-BLOCK HOUSED UNIT nomenclature SPHERICAL ROLLER BEARING SOLID-BLOCK HOUSED UNIT Nomenclature QM P 13 J 7 S E M Locking Style Qm eccentric lock qa concentric (set screw) lock, single-collar qaa concentric (set screw) lock, double-collar qv V-Lock, single-nut Qvv V-Lock, double-nut Dv tapered adapter lock (heavy-duty block) Ta tapered adapter lock (extreme-duty block) Housing Style P Type E dimension two-bolt pillow block PL two-bolt pillow block, S00 style PA SAF-style two-bolt pillow block PN SN-style two-bolt pillow block SN SN-style two-bolt pillow block PKT 9000 series two-bolt pillow block PXT 5000 series two-bolt pillow block PR Type E dimension four-bolt pillow block PF four-bolt pillow block, S00 style PH SAF-style four-bolt pillow block PG SN-style four-bolt pillow block PK 9000 series four-bolt pillow block PX 5000 series four-bolt pillow block f square flange block fb square flange block fl square flange block fx 5000 series flange block fy round flange block fk 9000 series flange block c piloted flange cartridge cw piloted flange cartridge fc piloted flange cartridge mc cartridge block tu take-up block Insert BORE Series 222XX (i.e., 13 = 22213) 232XX (for size 30 and 34 bearing only) Insert LOCKING Type J EC series A and AA CL series V V-Lock series K TA/DV series Diameter In inch (i.e., 7 = 2 7 ) and metric (i.e., 050 = 50 ) sizes CAST-STEEL HOUSING Expansion or Non-expansion BLANK (No letter) Non-expansion (fixed) E Expansion (floating) Seal Type M M seal (triple-lip nitrile rubber) N N seal (triple-lip DuPont Viton ) O O seal (triple-lip urethane) B B seal (double-lip nitrile rubber) C C seal (double-lip Viton) T T seal (DuPont Teflon labyrinth) ydr flange cartridge backing plate with dr triple-lip seal DuPont is a trademark of E.I. du Pont de Nemours and Company. Teflon is a registered trademark of E.I. du Pont de Nemours and Company. Viton is a registered trademark of E.I. du Pont de Nemours and Company. C-54 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Steel Cover Nomenclature Steel Cover Nomenclature CJ 18 T 085 S Open-End Steel Cover Locking Style CA concentric lock CJ eccentric lock CV V-Lock CK tapered adapter lock Insert Series 222XX (i.e., 13 = 22213) 232XX (for size 30 and 34 bearing only) Seal Type T seal only size In inch (i.e., 7 = 2 7 ) and metric (i.e., 050 = 50 ) sizes Steel Cover CS 18 STEEL Closed-End Steel Cover insert series 222XX (i.e., 13 = 22213) 232XX (for size 30 and 34 bearing only) Steel Cover TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-55

urethane cover nomenclature Urethane Cover Nomenclature Open-End Cover with DR Seal CJ DR 7 Locking Style CA concentric lock CJ eccentric lock CK tapered adapter lock Triple-Lip Secondary seal size In inch (i.e., 7 = 2 7 ) and metric (i.e., 050 = 50 ) sizes Open-End Cover with VR Seal CJ VR 13 Locking Style CV V-Lock CA concentric lock CJ eccentric lock CK tapered adapter lock SEAL TYPE VR ring Insert Series 222XX (i.e., 13 = 22213) 232XX (for size 30 and 34 bearing only) V-Lock Open-End Cover with DR Seal CV DR 13 085 Locking Style CV V-Lock Triple-Lip Secondary seal Insert Series 222XX (i.e., 13 = 22213) 232XX (for size 30 and 34 bearing only) size In inch (i.e., 7 = 2 7 ) and metric (i.e., 050 = 50 ) sizes CS 13 Closed-End Cover Insert Series 222XX (i.e., 13 = 22213) 232XX (for size 30 and 34 bearing only) C-56 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Backing plate Nomenclature Backing Plate Nomenclature Backing Plate (Only Available for CA and CJ Series s) UFP 7 Square Flange Block with VR Seal size In inch (i.e., 7 = 2 7 ) and metric (i.e., 050 = 50 ) sizes Backing Plate (Only Available for CA and CJ Series s) HSY 085 Round piloted flange cartridge with DR seal size In inch (i.e., 7 = 2 7 ) and metric (i.e., 050 = 50 ) sizes TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-57

ordering SOLID-BLOCK HOUSED UNITS Ordering SOLID-BLOCK housed UNITS Every solid-block housed unit is made of cast steel for greater strength (compared to cast iron). All bearings feature a double-row, spherical roller bearing design for a high load-carrying capacity, misalignment tolerance and reduced friction. Starting with these standard design advantages, you can choose from a wide range of sizes, locking styles, seal options and housing styles suited precisely for your application. There are many ways to determine the correct solid-block housed unit part number for ordering purposes: Once you determine the best locking style, housing and seal options for your application, you can easily find the correct part number in the tables included in the following sections. If you are ordering a replacement for an existing housed unit, locate the part number for that housed unit on the housing tag. If none of the above apply, or if you have additional questions or concerns about ordering the correct housed unit, contact your Timken engineer. C-58 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Seal AND COVER OPTIONS primary seals Seal AND COVER OPTIONS Primary Seals Primary seals are installed between the inner ring of the bearing and the housing. They are held securely in place by the external housing nut. Primary seals can be contacting or non-contacting, purging or non-purging and are available in several material compounds for a variety of applications. Triple-Lip Seals contacting, self-purging, low to moderate speeds (1) Timken offers three kinds of medium-contact triple-lip seals. Choose from seals made of nitrile synthetic rubber (acrylonitrile butadiene), DuPont Viton fluoroelastomer or urethane. M Seal This seal, made of nitrile rubber, offers superior sealing in moist and dirty applications. It is chemical- and corrosion-resistant and provides excellent lubrication retention. It also allows excess grease to purge from the bearing cavity. N Seal Made of DuPont Viton, this seal provides excellent chemical resistance and can operate at higher temperatures than nitrile rubber. O Seal Made of high-strength urethane for superior abrasion resistance. Labyrinth Seals non-contacting, non-purging, all speeds (2) Instead of trying to form a seal with a single strong barrier, a labyrinth seal uses a winding passageway to accomplish the same reduction in flow. Not only is seal friction reduced, but so is seal wear. T Seal This seal consists of a DuPont Teflon ring pressed onto the inner ring of the bearing that floats between two pieces of formed steel to accoodate misalignment. When using this seal, the housing comes with a vent fitting. Developed for higher-speed applications involving dirty conditions or moisture-affected areas, it is able to operate at higher temperatures and is impervious to most chemicals. Fig. C-25. Triple-lip seals. Fig.C-26. T seal. Double-Lip Seals contacting, non-purging, (1)(2) low speeds These seals incorporate a double-lip seal, a garter spring for maximum contact, and a heavy-duty steel shield that protects the seal from large pieces of debris that could damage the seal itself. B Seal Made of nitrile rubber, this seal offers superior protection in applications with oil lubrication and is designed for extreme moisture, fine dust or extremely dirty applications. When using this seal, the housing comes with a vent fitting. C Seal Made of DuPont Viton, this seal provides excellent chemical and abrasion resistance and can operate at higher temperatures than nitrile rubber. When using this seal, the housing comes with a vent fitting. (1) Temperature limit -40 C to 121 C (-40 F to 250 F) continuous, 149 C (300 F) intermittent. Constant seal-lip pressure on the inner ring results in higher operating temperatures of the complete unit. (See pages C-25 and C-26). (2) Relief valve is standard. Fig. C-27. Double-lip seals. DuPont is a trademark of E.I. du Pont de Nemours and Company. Teflon is a registered trademark of E.I. du Pont de Nemours and Company. Viton is a registered trademark of E.I. du Pont de Nemours and Company. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-59

seal AND COVER options Secondary Seals Secondary Seals In many circumstances, bearings become damaged in housed units due to premature primary seal wear. This is usually the result of harsh operating environments or lubrication issues. Timken offers secondary sealing options that provide an additional barrier to protect the primary seal. These economical secondary seals and covers are easily outfitted on virtually all solid-block housed units. Steel Covers Labyrinth Seals Non-Contacting, Non-Purging, All Speeds A labyrinth seal uses a winding passageway to accomplish a reduction in flow instead of trying to form a seal with a single strong barrier. Seal friction and wear is reduced. T Seal This seal, which is used in the open-end steel covers, consists of a DuPont Teflon ring pressed onto the shaft that floats between two pieces of formed steel to accoodate misalignment. Developed for higher-speed applications involving dirty conditions or moisture-affected areas, it is able to operate at higher temperatures and is impervious to most chemicals, while avoiding shaft damage. Urethane Covers DR Triple-Lip Secondary Seal low speeds The DR seal is the standard triple-lip seal adapted for use on the open-end covers and piloted flange cartridge backing plates (HSY). This seal can move within the cover or backing plate opening to accoodate misalignment while maintaining full contact to the shaft for positive sealing. VR V-Ring Secondary Seal high speeds The VR seal, made of nitrile rubber, rides on the shaft and seals against the open-end covers and flange block backing plates (UFP). Fig. C-28. Open-end steel cover with T seal. Fig. C-29. Open-end urethane cover with DR seal. Fig. C-30. Open-end urethane cover with VR seal. Fig. C-31. HSY backing plate with DR seal. Fig. C-32. UFP backing plate with VR seal. C-60 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Seal AND COVER OPTIONS Secondary Seals Steel Auxiliary Covers Steel auxiliary covers bolt directly onto spherical roller bearing solid-block housed units. A DuPont Teflon labyrinth seal on the open-ended covers guards against shaft damage and gives protection at high running speeds. Made from steel to withstand the toughest applications, the covers are black-oxide treated for improved corrosion protection. These covers are available in both open-ended and closedended designs for standard and custom configurations of Timken spherical roller bearing solid-block housed units. Closed-End Covers (CS) These bolt-on covers are designed to be virtually indestructible and extremely convenient. They are made from structural steel or urethane and are easy to install. The cover completely seals the bearing, preventing contamination from reaching the primary seal. Every cover is outfitted with a grease fitting to fill the cover cavity for an added barrier against contamination. Piloted Flange Cartridge Backing Plates (HSY) The HSY backing plate is designed to work in conjunction with the piloted flange cartridge housed units. Made of structural urethane, these plates are fitted to the back side of the pilot for extra protection. The HSY plate comes supplied with a triple-lip seal (DR) or a contamination collar (optional) to form an additional barrier against contamination for the most demanding applications. Fig. C-35. Piloted flange cartridge backing plates. Fig. C-33. Closed-end covers. Flange Block Backing Plates (UFP) These backing plates are made from structural urethane and are uniquely designed to work with our flange block housed units. Made to fit flush against the back of the housing, these plates create a labyrinth over the inner ring for additional contamination protection. The UFP plate, when used with an optional V-ring seal (VR), provides an extra barrier against extreme contamination. Open-End Covers (CJ/CK/CV) These bolt-on covers are made from structural steel or urethane for repeated and continuous use. The covers are used with either a DuPont Teflon (T seal), triple-lip seal (DR) or a V-ring seal (VR) to help prevent contamination from reaching the primary seal. Every cover is outfitted with a grease fitting to fill the cover cavity for an added barrier against contamination. Fig. C-36. Flange block backing plates. Fig. C-34. Open-end covers. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-61

Seal AND COVER OPTIONS STEEL COVER DIMENSIONS Steel COVER DIMENSIONS Table C-35. V-LOCK Series Straight bore equivalents E A E Cover Part Steel Cover Dimensions A B C D E F F F F F Fig. C-37. Double open-end cover. (1) E Fig. C-38. Single open-end cover. Fig. C-39. Single closed-end cover. C D C D B E F F CS11STEEL CV11T115S CV11T050S CV11T0S CS12STEEL CV12T055S CV12T3S CV12T4S CS14STEEL CV14T060S CV14T7S CV14T8S CV14T065S CSSTEEL CVT211S CVT212S CVT070S CVT215S CVT075S CVT300S CS19STEEL CV19T080S CV19T303S CV19T304S CV19T085S CV19T307S CV19T308S CV19T090S CS22STEEL CV22T311S CV22T312S CV22T100S CV22T315S CV22T400S CS26STEEL CV26T110S CV26T407S CV26T408S CV26T115S CS28STEEL CV28T125S CV28T415S CV28T500S CV28T130S CLOSED 1 15 50 2 CLOSED 55 2 3 2 1 4 CLOSED 60 2 7 2 1 2 65 CLOSED 2 11 2 3 4 70 2 15 75 3 CLOSED 80 3 3 3 1 4 85 3 7 3 1 2 90 CLOSED 3 11 3 3 4 100 3 15 4 CLOSED 110 4 7 4 1 2 115 CLOSED 125 4 15 5 130 22211 22212 22214 222 22219 22222 22226 22228 128.5 5.06 129.0 5.08 135.4 5.33 150.1 5.91 7.9 6.61 217.7 8.57 219.7 8.65 223.5 8.80 143.3 5.64 141.5 5.57 159.3 6.27 7.6 6.60 191.0 7.52 1.8 9.52 2.8 9.56 6.9 9.72 79.2 3.12 77.0 3.03 91.4 3.60 92.5 3.64 106.9 4.21 133.1 5. 133.1 5. 135.1 5.32 75.2 2.96 72.9 2.87 87.4 3.44 88.4 3.48 102.9 4.05 129.0 5.08 129.0 5.08 131.1 5. 64.3 2.53 64.5 2.54 67.8 2.67 75.2 2.96 84.1 3.31 109.0 4.29 110.0 4.33 111.8 4.40 89.7 3.53 98.6 3.88 103.6 4.08 1.1 4.57 139.4 5.49 180.1 7.09 9.3 8. 9.3 8. Fig. C-40. Single closed-end cover and single open-end cover. (1) (1) Double covers available only on pillow block and take-up style bearings. C-62 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Seal AND COVER OPTIONS STEEL COVER DIMENSIONS Table C-36. V-LOCK Series Tapered bore equivalents Table C-37. CL SERIES SINGLE AND DOUBLE SET SCREW LOCKS Cover Part Steel Cover Dimensions A B C D E F Cover Part Steel Cover Dimensions A B C D E F CS11STEEL CLOSED CS08STEEL CLOSED CV11T115S CV11T050S 1 15 50 22211 1.2 4.89 139.2 5.48 77.0 3.03 72.9 2.87 62.2 2.45 89.7 3.53 CA08T035S CA08T107S 35 1 7 228 115.6 4.55 127.8 5.03 69.9 2.75 65.8 2.59 57.9 2.28 69.6 2.74 CV11T0S 2 CA08T108S 1 1 2 CS13STEEL CLOSED CS09STEEL Closed CV13T055S CV13T3S CV13T4S 55 2 3 2 1 4 22213 130.3 5.13 154.2 6.07 88.9 3.50 84.8 3.34 65.3 2.57 103.6 4.08 CA09T040S CA09T111S CA09T112S 40 1 11 1 3 4 229 121.7 4.79 130.8 5.15 69.9 2.75 65.8 2.59 61.0 2.40 74.7 2.94 CS15STEEL CLOSED CA09T045S 45 CV15T060S CV15T7S CV15T8S 60 2 7 2 1 2 22215 142.7 5.62 0.3 6.31 88.9 3.50 84.8 3.34 71.4 2.81 1.1 4.57 CS10STEEL CA10T115S CA10T050S CLOSED 1 15 50 22210 122.7 4.83 132.8 5.23 73.2 2.88 69.1 2.72 61.5 2.42 79.8 3.14 CV15T065S 65 CA10T0S 2 CS17STEEL CLOSED CS11STEEL CLOSED CV17T211S CV17T212S CV17T070S CV17T215S 2 11 2 3 4 70 2 15 22217 133.9 5.27 156.0 6.14 88.9 3.50 84.8 3.34 67.1 2.64 132.1 5.2 CA11T055S CA11T3S CA11T4S CS13STEEL 55 2 3 2 1 4 CLOSED 22211 128.5 5.06 143.3 5.64 79.2 3.12 75.2 2.96 64.3 2.53 89.7 3.53 CV17T075S CV17T300S CSSTEEL 75 3 CLOSED CA13T060S CA13T7S CA13T8S 60 2 7 2 1 2 22213 135.4 5.33 159.3 6.27 91.4 3.60 87.4 3.44 67.8 2.67 103.6 4.08 CVT080S 80 CA13T065S 65 CVT303S 3 3 CS15STEEL CLOSED CVT304S CVT085S CVT307S CVT308S 3 1 4 85 3 7 3 1 2 222 170.4 6.71 193.0 7.60 108.0 4.25 103.9 4.09 85.3 3.36 0.3 6.31 CA15T211S CA15T212S CA15T070S CA15T215S 2 11 2 3 4 70 2 15 22215 148.1 5.83 5.6 6.52 91.4 3.60 87.4 3.44 74.2 2.92 1.1 4.57 CVT090S 90 CA15T075S 75 CS22STEEL CLOSED CA15T300S 3 CV22T311S 3 11 CS18STEEL CLOSED CV22T312S CV22T100S 3 3 4 100 22222 8.5 8.21 232.9 9.17 128.5 5.06 1.5 4.90 104.4 4.11 180.1 7.09 CA18T080S CA18T303S 80 3 3 CV22T315S CV22T400S 3 15 4 CA18T304S CA18T085S 3 1 4 85 22218 4.8 6.49 188.0 7.40 105.7 4. 101.6 4.00 82.6 3.25 139.4 5.49 CSSTEEL CVT110S CLOSED 110 222 213.6 8.41 237.7 9.36 131.1 5. 127.0 5.00 106.7 4. 180.1 7.09 CA18T307S CA18T308S 3 7 3 1 2 CS26STEEL CLOSED CA18T090S 90 CV26T110S CV26T407S CV26T408S CV26T115S 110 4 7 4 1 2 115 22226 210.6 8.29 233.9 9.21 128.5 5.06 1.5 4.90 105.4 4.15 9.3 8. CSSTEEL CAT311S CAT312S CAT100S CLOSED 3 11 3 3 4 100 222 179.6 7.07 2.2 7.96 112.5 4.43 108.5 4.27 89.9 3.54 0.3 6.31 CS28STEEL CLOSED CAT315S 3 15 CV28T125S CV28T415S CV28T500S CV28T130S 125 4 15 5 130 22228 214.6 8.45 238.0 9.37 130.6 5.14 126.5 4.98 107.2 4.22 9.3 8. CAT400S CS22STEEL CA22T110S CA22T407S CA22T408S 4 CLOSED 110 4 7 4 1 2 22222 217.7 8.57 1.8 9.52 133.1 5. 129.0 5.08 109.0 4.29 180.1 7.09 CA22T115S 115 CS26STEEL CLOSED CA26T125S CA26T415S CA26T500S 125 4 15 5 22226 219.7 8.65 2.8 9.56 133.1 5. 129.0 5.08 110.0 4.33 9.3 8. CA26T130S 130 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-63

Seal AND COVER OPTIONS STEEL COVER DIMENSIONS Table C-38. EC Series Eccentric Lock Cover Part Steel Cover Dimensions A B C D E F Cover Part Steel Cover Dimensions A B C D E F CS08STEEL CJ08T035S CJ08T107S CJ08T108S CS09STEEL CJ09T040S CJ09T111S CJ09T112S CJ09T045S CS10STEEL CJ10T115S CJ10T050S CJ10T0S CS11STEEL CJ11T055S CJ11T3S CJ11T4S CS13STEEL CJ13T060S CJ13T7S CJ13T8S CJ13T065S CS15STEEL CJ15T211S CJ15T212S CJ15T070S CJ15T215S CJ15T075S CJ15T300S CS18STEEL CJ18T080S CLOSED 35 1 7 1 1 2 Closed 40 1 11 1 3 4 45 CLOSED 1 15 50 2 CLOSED 55 2 3 2 1 4 CLOSED 60 2 7 2 1 2 65 CLOSED 2 11 2 3 4 70 2 15 75 3 CLOSED 80 228 229 22210 22211 22213 22215 115.6 4.55 121.7 4.79 122.7 4.83 128.5 5.06 135.4 5.33 148.1 5.83 127.8 5.03 130.8 5.15 132.8 5.23 143.3 5.64 159.3 6.27 5.6 6.52 69.9 2.75 69.9 2.75 73.2 2.88 79.2 3.12 91.4 3.60 91.4 3.60 65.8 2.59 65.8 2.59 69.1 2.72 75.2 2.96 87.4 3.44 87.4 3.44 57.9 2.28 61.0 2.40 61.5 2.42 64.3 2.53 67.8 2.67 74.2 2.92 69.6 2.74 74.7 2.94 79.8 3.14 89.7 3.53 103.6 4.08 1.1 4.57 CSSTEEL CJT311S CJT312S CJT100S CJT315S CJT400S CS22STEEL CJ22T110S CJ22T407S CJ22T408S CJ22T115S CS26STEEL CJ26T125S CJ26T415S CJ26T500S CJ26T130S CS30STEEL CJ30T507S CJ30T508S CJ30T140S CJ30T515S CJ30T600S CJ30T150S CS34STEEL CJ34T607S CJ34T608S CJ34T170S CJ34T615S CJ34T700S CJ34T180S CLOSED 3 11 3 3 4 100 3 15 4 CLOSED 110 4 7 4 1 2 115 CLOSED 125 4 15 5 130 CLOSED 5 7 5 1 2 140 5 15 6 150 CLOSED 6 7 6 1 2 170 6 15 7 180 222 22222 22226 23230 23234 179.6 7.07 217.7 8.57 219.7 8.65 270.3 10.64 300.5 11.83 2.2 7.96 1.8 9.52 2.8 9.56 283.2 11.15 305.3 12.02 112.5 4.43 133.1 5. 133.1 5. 148.1 5.83 155.2 6.11 108.5 4.27 129.0 5.08 129.0 5.08 144.0 5.67 151.1 5.95 89.9 3.54 109.0 4.29 110.0 4.33 135.1 5.32 150.1 5.91 0.3 6.31 180.1 7.09 9.3 8. 239.5 9.43 279.4 1 CJ18T303S 3 3 CJ18T304S CJ18T085S 3 1 4 85 22218 4.8 6.49 188.0 7.40 105.7 4. 101.6 4.00 82.6 3.25 139.4 5.49 CJ18T307S 3 7 CJ18T308S 3 1 2 CJ18T090S 90 C-64 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Seal AND COVER OPTIONS STEEL COVER DIMENSIONS Table C-39. TA/DV Series Tapered Adapter Lock Cover Part Steel Cover Dimensions A B C D E F CS09STEEL CK09T107S CK09T108S CK09T040S CS10STEEL CK10T111S CK10T112S CK10T045S CS11STEEL CK11T115S CK11T050S CK11T0S CS12STEEL CK12T055S CS13STEEL CK13T3S CK13T4S CK13T060S CS15STEEL CK15T7S CK15T8S CK15T065S CSSTEEL CKT211S CKT212S CKT070S CS17STEEL CK17T215S CK17T075S CK17T300S CS18STEEL CK18T080S CK18T303S CK18T304S CS19STEEL CK19T085S CSSTEEL CKT307S CKT308S CKT090S CS22STEEL CK22T315S CK22T400S CK22T100S CSSTEEL CKT403S CKT404S CKT110S CS26STEEL CK26T407S CK26T408S CK26T115S CS28STEEL CK28T415S CK28T500S CK28T125S CLOSED 1 7 1 1 2 40 CLOSED 1 11 1 3 4 45 CLOSED 1 15 50 2 CLOSED 55 CLOSED 2 3 2 1 4 60 CLOSED 2 7 2 1 2 65 CLOSED 2 11 2 3 4 70 CLOSED 2 15 75 3 CLOSED 80 3 3 3 1 4 CLOSED 85 CLOSED 3 7 3 1 2 90 CLOSED 3 15 4 100 CLOSED 4 3 4 1 4 110 CLOSED 4 7 4 1 2 115 CLOSED 4 15 5 125 229 22210 22211 22212 22213 22215 222 22217 22218 22219 222 22222 222 22226 22228 118.4 4.66 118.4 4.66 1.2 4.89 123.7 4.87 130.3 5.13 142.7 5.62 144.8 5.70 133.9 5.27 159.5 6.28 2.6 6.40 170.4 6.71 8.5 8.21 213.6 8.41 210.6 8.29 214.6 8.45 127.5 5.02 130.0 5.12 139.2 5.48 136.4 5.37 154.2 6.07 0.3 6.31 2.3 6.39 156.0 6.14 182.9 7. 185.7 7.31 193.0 7.60 232.9 9.17 237.7 9.36 233.9 9.21 238.0 9.37 68.3 2.69 70.9 2.79 77.0 3.03 74.4 2.93 88.9 3.50 88.9 3.50 89.9 3.54 88.9 3.50 102.9 4.05 104.4 4.11 108.0 4.25 128.5 5.06 131.1 5. 128.5 5.06 130.6 5.14 64.3 2.53 66.8 2.63 72.9 2.87 70.4 2.77 84.8 3.34 84.8 3.34 85.9 3.38 84.8 3.34 98.8 3.89 100.3 3.95 103.9 4.09 1.5 4.90 127.0 5.00 1.5 4.90 126.5 4.98 59.2 2.33 59.2 2.33 62.2 2.45 62.0 2.44 65.3 2.57 71.4 2.81 72.4 2.85 67.1 2.64 79.8 3.14 81.3 3. 85.3 3.36 104.4 4.11 106.7 4. 105.4 4.15 107.2 4.22 74.7 2.94 79.8 3.14 89.7 3.53 98.6 3.88 103.6 4.08 1.1 4.57 1.1 4.57 132.1 5. 139.4 5.49 139.4 5.49 0.3 6.31 180.1 7.09 180.1 7.09 9.3 8. 9.3 8. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-65

Seal AND COVER Options URETHANE Closed-end cover dimensions URETHANE Closed-end Cover Dimensions C1 Table C-40. Closed-end Cover Dimensions Cover Part (1) A B C1 (2) CS08 CS09 CS10 CS11 CS12V CS13/CS14V CS15/CSV CS17 CS18/CS19V CS CS22 CS CS26/CS28V CS30 CS34 97.0 3.82 101.8 4.01 106.9 4.21 117.1 4.61 126.0 4.96 132.1 5. 142.0 5.59 0.5 6.32 8.1 6.62 192.0 7.56 212.1 8.35 212.1 8.35 1.3 9.50 271.5 10.69 304.8 12.00 76.7 3.02 81.5 3.21 86.6 3.41 96.8 3.81 105.7 4. 1.1 4.57 122.9 4.84 141.5 5.57 149.1 5.87 174.7 6.88 194.8 7.67 194.8 7.67 223.8 8.81 254.0 10.00 287.3 11.31 1.08 33.0 1.30 31.0 1.22 38.9 1.53 44.5 1.75 52.6 2.07 52.6 2.07 56.9 2. 56.9 2. 56.9 2. (1) Cover part number, CSXX, is determined by the bearing insert series of unit on which cover will be installed. See nomenclature guide on page C-54 to determine bearing insert series. (2) Extended covers available upon request. C-66 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Seal AND COVER Options URETHANE OPEN-end covers with DR SEALS Open-end Covers with DR Seals C1 C2 Table C-41. V-LOCK SERIES STRAIGHT BORE EQUIVALENT OPEN-END COVER WITH DR SEAL (QV[V]...P, PL, SN, PF, PR, C, CW, F, FL, FY, FX, TU) Cover Part CVDR115 CVDR0 CVDR050MM CVDR3 CVDR4 CVDR055MM CVDR060MM CVDR7 CVDR8 CVDR065MM CVDR211 CVDR212 CVDR070MM CVDR215 CVDR300 CVDR075MM CVDR303 CVDR304 CVDR080MM CVDR085MM CVDR307 CVDR308 CVDR090MM CVDR311 CVDR312 CVDR100MM CVDR315 CVDR400 CVDR110MM CVDR407 CVDR408 CVDR115MM CVDR125MM CVDR415 CVDR500 CVDR130MM 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 11 3 3 4 100 3 15 4 110 4 7 4 1 2 115 125 4 15 5 130 A B C1 C2 117.1 4.61 126.0 4.96 132.1 5. 142.0 5.59 8.1 6.62 212.1 8.35 1.3 9.50 1.3 9.50 96.8 3.81 105.7 4. 1.1 4.57 122.9 4.84 149.1 5.87 194.8 7.67 223.8 8.81 223.8 8.81 27.4 1.08 33.0 1.30 38.9 1.53 52.6 2.07 56.9 2. 56.9 2. 34.3 1.35 34.3 1.35 30.0 1.18 35.6 1.40 41.4 1.63 55.1 2.17 59.4 2.34 59.4 2.34 Table C-42. V-LOCK SERIES TAPERED ADAPTER EQUIVALENT OPEN-END COVER WITH DR SEAL (QV[V]...PA, PN, PKT, PK, PH, PG, FC, FB, MC) Cover Part CKDR115 CKDR0 CKDR050MM CKDR3 CKDR4 CKDR055MM CKDR060MM CKDR7 CKDR8 CKDR065MM CKDR211 CKDR212 CKDR070MM CKDR215 CKDR300 CKDR075MM CKDR303 CKDR304 CKDR080MM CKDR085MM CKDR307 CKDR308 CKDR090MM CKDR311 CKDR312 CKDR100MM CKDR315 CKDR400 CKDR110MM CKDR407 CKDR408 CKDR115MM CKDR125MM CKDR415 CKDR500 CKDR130MM 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 11 3 3 4 100 3 15 4 110 4 7 4 1 2 115 125 4 15 5 130 A B C1 C2 117.1 4.61 132.1 5. 142.0 5.59 0.5 6.32 192.0 7.56 212.1 8.35 1.3 9.50 1.3 9.50 96.8 3.81 1.1 4.57 122.9 4.84 141.5 5.57 174.8 6.88 194.8 7.67 223.8 8.81 223.8 8.81 27.4 1.08 33.0 1.30 31.0 1.22 44.5 1.75 52.6 2.07 56.9 2. 56.9 2. 34.3 1.35 30.0 1.18 35.6 1.40 33.5 1.32 47.0 1.85 55.1 2.17 59.4 2.34 59.4 2.34 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-67

Seal AND COVER Options URETHANE OPEN-end covers with DR SEALS Table C-43. CL and EC Series Open-end Cover with DR Seal Cover Part CJDR035MM CJDR107 CJDR108 CJDR040MM CJDR111 CJDR112 CJDR045MM CJDR115 CJDR0 CJDR050MM CJDR3 CJDR4 CJDR055MM CJDR060MM CJDR7 CJDR8 CJDR065MM CJDR211 CJDR070MM CJDR212 CJDR215 CJDR300 CJDR075MM CJDR303 CJDR304 CJDR080MM CJDR085MM CJDR307 CJDR308 CJDR090MM CJDR315 CJDR400 CJDR100MM CJDR110MM CJDR407 CJDR408 CJDR115MM CJDR125MM CJDR415 CJDR500 CJDR130MM CJDR507 CJDR508 CJDR140MM CJDR515 CJDR600 CJDR150MM CJDR607 CJDR608 CJDR170MM CJDR615 CJDR700 CJDR180MM 35 1 7 1 1 2 40 1 11 1 3 4 45 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 70 2 3 4 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 15 4 100 110 4 7 4 1 2 115 125 4 15 5 130 5 7 5 1 2 140 5 15 6 150 6 7 6 1 2 170 6 15 7 180 A B C1 C2 97.0 3.82 101.9 4.01 106.9 4.21 117.1 4.61 132.1 5. 142 5.59 8.1 6.62 192 7.56 212.1 8.35 1.3 9.50 271.6 10.69 304.8 12.00 76.7 3.02 81.6 3.21 86.6 3.41 96.8 3.81 1.1 4.57 122.9 4.84 149.1 5.87 174.8 6.88 194.8 7.67 223.8 8.81 254.0 10.00 287.3 11.31 27.4 1.08 33.0 1.30 38.9 1.53 44.5 1.75 52.6 2.07 56.9 2. 56.9 2. 56.9 2. 34.3 1.35 34.3 1.35 34.3 1.35 34.3 1.35 30.0 1.18 35.6 1.40 41.4 1.63 47.0 1.85 55.1 2.17 59.4 2.34 59.4 2.34 59.4 2.34 C1 C2 Table C-44. TA/DV Series Open-end Cover with DR Seal Cover Part CKDR107 CKDR108 CKDR040MM CKDR111 CKDR112 CKDR045MM CKDR115 CKDR0 CKDR050MM CKDR055MM CKDR3 CKDR4 CKDR060MM CKDR7 CKDR8 CKDR065MM CKDR211 CKDR212 CKDR070MM CKDR215 CKDR300 CKDR075MM CKDR080MM CKDR303 CKDR304 CKDR085MM CKDR307 CKDR308 CKDR090MM CKDR315 CKDR400 CKDR100MM CKDR403 CKDR404 CKDR110MM CKDR407 CKDR408 CKDR115MM CKDR415 CKDR500 CKDR125MM 1 7 1 1 2 40 1 11 1 3 4 45 1 15 2 50 55 2 3 2 1 4 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 80 3 3 3 1 4 85 3 7 3 1 2 90 3 15 4 100 4 3 4 1 4 110 4 7 4 1 2 115 4 15 5 125 A B C1 C2 101.9 4.01 106.9 4.21 117.1 4.61 126.0 4.96 132.1 5. 142.0 5.59 142.0 5.59 0.5 6.32 8.1 6.62 8.1 6.62 192.0 7.56 212.1 8.35 212.1 8.35 1.3 9.50 1.3 9.50 81.5 3.21 86.6 3.41 96.8 3.81 105.7 4. 1.1 4.57 122.9 4.84 122.9 4.84 141.5 5.57 149.1 5.87 149.1 5.87 174.8 6.88 194.8 7.67 194.8 7.67 223.8 8.81 223.8 8.81 27.4 1.08 33.0 1.30 33.0 1.30 31.0 1.22 38.9 1.53 38.9 1.53 44.5 1.75 52.6 2.07 52.6 2.07 56.9 2. 56.9 2. 34.3 1.35 34.3 1.35 34.3 1.35 34.3 1.35 30.0 1.18 35.6 1.40 35.6 1.40 33.5 1.32 41.4 1.63 41.4 1.63 47.0 1.85 55.1 2.17 55.1 2.17 59.4 2.34 59.4 2.34 C-68 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Seal AND COVER Options URETHANE open-end covers with VR seals Open-end Covers with VR Seals C1 C2 Table C-45. V-LOCK SERIES STRAIGHT BORE EQUIVALENT OPEN-END COVER WITH VR SEAL (QV[V)]...P, PL, SN, PF, PR, PX, PXT, C, CW, F, FL, FY, FX, TU) Cover Part (1) CVVR11 CVVR12 CVVR14 CVVR CVVR19 CVVR22 CVVR26 CVVR28 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 11 3 3 4 100 3 15 4 110 4 7 4 1 2 115 125 4 15 5 130 A B C1 C2 117.1 4.61 126.0 4.96 132.1 5. 142.0 5.59 8.1 6.62 212.1 8.35 1.3 9.50 1.3 9.50 96.8 3.81 105.7 4. 1.1 4.57 122.9 4.84 149.1 5.87 194.8 7.67 223.8 8.81 223.8 8.81 27.4 1.08 33.0 1.30 38.9 1.53 52.6 2.07 56.9 2. 56.9 2. (1) Please refer to bore size when choosing cover for straight-bore V-Lock. 40.6 1.60 40.6 1.60 36.3 1.43 44.0 1.73 50.0 1.96 63.5 2.50 69.6 2.74 69.6 2.74 Table C-46. V-LOCK SERIES TAPERED ADAPTER EQUIVALENT OPEN-END COVER WITH VR SEAL (QV[V]...PA, PN, PKT, PK, PH, PG, FC, FB, MC) Cover Part CKVR11 CKVR13 CKVR15 CKVR17 CKVR CKVR22 CKVR CKVR26 CKVR28 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 11 3 3 4 100 3 15 4 110 110 4 7 4 1 2 115 125 4 15 5 130 A B C1 C2 117.1 4.61 132.1 5. 142.0 5.59 0.6 6.32 192.0 7.56 212.1 8.35 212.1 8.35 1.3 9.50 1.3 9.50 96.8 3.81 1.1 4.57 122.9 4.84 141.5 5.57 174.8 6.88 194.8 7.67 194.8 7.67 223.8 8.81 223.8 8.81 27.4 1.08 33.0 1.30 31.0 1.22 44.4 1.75 52.6 2.07 52.6 2.07 56.9 2. 56.9 2. 40.6 1.60 36.3 1.43 41.9 1.65 41.9 1.65 55.4 2.18 63.5 2.50 63.5 2.5 69.6 2.74 69.6 2.74 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-69

Seal AND COVER Options URETHANE open-end covers with VR seals C1 C2 Table C-47. CL and EC Series Open-end Cover with VR Seal Cover Part CJVR08 CJVR09 CJVR10 CJVR11 CJVR13 CJVR15 CJVR18 CJVR CJVR22 CJVR26 35 1 7 1 1 2 40 1 11 1 3 4 45 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 70 2 3 4 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 15 4 100 110 4 7 4 1 2 115 125 4 15 5 A B C1 C2 97.0 3.82 101.9 4.01 106.9 4.21 117.1 4.61 132.1 5. 142.0 5.59 8.1 6.62 192.0 7.56 212.1 8.35 1.3 9.50 76.7 3.02 81.5 3.21 86.6 3.41 96.8 3.81 1.1 4.57 122.9 4.84 149.1 5.87 174.8 6.88 194.8 7.67 223.8 8.81 27.4 1.08 33.0 1.30 38.9 1.53 44.5 1.75 52.6 2.07 56.9 2. 39.4 1.55 40.6 1.60 40.6 1.60 40.6 1.60 36.3 1.43 44.0 1.73 49.8 1.96 55.4 2.18 65.3 2.57 69.6 2.74 Table C-48. TA/DV Series Open-end Cover with VR Seal Cover Part CKVR09 CKVR10 CKVR11 CKVR12 CKVR13 CKVR15 CKVR CKVR17 CKVR18 CKVR19 CKVR CKVR22 CKVR CKVR26 CKVR28 1 7 1 1 2 40 1 11 1 3 4 45 1 15 2 50 55 2 3 2 1 4 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 80 3 3 3 1 4 85 3 7 3 1 2 90 3 15 4 100 4 3 4 1 4 110 4 7 4 1 2 115 4 15 5 125 A B C1 C2 101.9 4.01 106.9 4.21 117.1 4.61 126.0 4.96 132.1 5. 142.0 5.59 142.0 5.59 0.5 6.32 8.1 6.62 8.1 6.62 192.0 7.56 212.1 8.35 212.1 8.35 1.3 9.50 1.3 9.50 81.5 3.21 86.6 3.41 96.8 3.81 105.7 4. 1.1 4.57 122.9 4.84 122.9 4.84 141.5 5.57 149.1 5.87 149.1 5.87 174.8 6.88 194.8 7.67 194.8 7.67 223.8 8.81 223.8 8.81 27.4 1.08 33.0 1.30 33.0 1.30 31.0 1.22 38.9 1.53 38.9 1.53 44.5 1.75 52.6 2.07 52.6 2.07 56.9 2. 56.9 2. 39.4 1.55 40.6 1.6 40.6 1.60 40.6 1.6 36.3 1.43 41.9 1.65 41.9 1.65 41.9 1.65 49.8 1.96 49.8 1.96 55.4 2.18 63.5 2.50 63.5 2.50 69.6 2.74 69.6 2.74 C-70 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

Seal AND COVER Options UFP and HSY Flange Block Backing Plate Dimensions UFP and HSY Flange Block Backing Plate Dimensions A E C Table C-49. UFP Backing Plate Dimensions (1) Cover Part A C E UFP08 5.1 0. UFP09 5.1 0. UFP10 3.8 0.15 UFP11 6.4 0.25 UFP13 5.1 0. UFP15 5.1 0. UFP18 5.1 0. UFP 5.1 0. UFP22 5.1 0. UFP26 5.1 0. (1) Actual backing plate may differ from drawing. 95.3 3.75 105.9 4.17 106.4 4.19 114.6 4.51 146.1 5.75 146.6 5.77 187.5 7.38 6.5 8.13 215.9 8.50 299 11.77 39.4 1.55 44.7 1.76 51.8 2.04 59.7 2.35 64.8 2.55 78.0 3.07 90.4 3.56 104.1 4.10 130.3 5.13 128.3 5.05 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-71

Seal AND COVER Options UFP and HSY Flange Block Backing Plate Dimensions A E C Table C-50. HSY Backing Plate Dimensions Cover Part A C E HSY10 HSY11 HSY13 HSY14 HSY15 HSY HSY18 HSY19 HSY HSY22 5.1 0. 5.1 0. 6.4 0.25 6.4 0.25 6.4 0.25 8.9 0.35 5.1 0. 7.6 0.30 5.1 0. 7.6 0.30 108.0 4.25 1.1 4.73 133.4 5.25 133.4 5.25 155.7 6.13 155.7 6.13 181.1 7.13 181.1 7.13 199.9 7.87 254.0 10.00 68.3 2.69 74.7 2.94 81.0 3.19 81.0 3.19 93.7 3.69 93.7 3.69 106.4 4.19 106.4 4.19 119.1 4.69 1 5.19 C-72 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

V-Lock SERIES V-LOCK SERIES The V-Lock locking mechanism (U.S. Pat. 7344313) evenly distributes force on the shaft, helping eliminate fretting corrosion. V-Lock provides maximum holding power and prevents overtightening. In response to customer input, V-Lock was specifically designed to address coon spherical roller bearing solid-block housed unit problems: Reliable mechanical withdrawal. Preset spherical inner ring radial internal clearances (feeler gages are not required). Quick installation (typically 10 minutes or less). Highest shaft-holding power. Works well in high-speed applications where shaft centering is an issue. Fig. C-41. V-Lock series insert. You Have Choices For the V-Lock series, you can select either single-nut or doublenut versions and choose from many seal configurations and housing styles, which are shown on page C-74. Housings Two-bolt pillow blocks. Four-bolt pillow blocks. Flange blocks. Piloted flange cartridges. Cartridge blocks. Take-up blocks. Seals Labyrinth: DuPont Teflon (T). Triple-lip: nitrile rubber (M), urethane (O) and DuPont Viton (N). Double-lip: nitrile rubber (B) and DuPont Viton (C). Steel and urethane closed-end covers (CS). Steel and urethane open-end covers (CV) with: DuPont Teflon (T). Triple-lip seal (DR). V-ring seal (VR). Wedge Relief Valve Double-Tapered Inner Ring Grease Fitting Clamping Nut Sleeve Fig. C-42. V-Lock series cutaway view shown with double-nut (QVV) insert. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-73

V-Lock SERIES V-Lock Series (Adapter Lock) U.S. Pat. 7344313 Housing Type Primary Seals M N O B C T Open-End Cover Secondary Seals and Covers HSY Flange Cartridge Backing Plate Closed-End DR VR T Cover DR Pillow Block UFP Backing Plate V-Lock (Timken Exclusive Double Taper Lock) Flange Block Piloted Flange Cartridge Take-Up Block Cartridge Block Pillow Block Flange Block CL Series (Set Screw Lock) Piloted Flange Cartridge Take-Up Block Cartridge Block Hangar Block Pillow Block Flange Block EC Series (Eccentric Lock) Piloted Flange Cartridge Take-Up Block Cartridge Block Hangar Block Pillow Block TA Series (Tapered Adapter Lock) Flange Block Piloted Flange Cartridge Cartridge Block Pillow Block DV Series (Tapered Adapter Lock) Flange Block Piloted Flange Cartridge C-74 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

V-Lock SERIES QVVP Two-Bolt Pillow Blocks Straight Bore Equivalent QVVP Two-Bolt Pillow Blocks Straight Bore Equivalent Part (1) QVVP11V115S 1 15 57.2 122.2 75.9 152.4 QVVP11V0S 2 22211 2.25 4.81 2.99 6.00 QVVP11V050S 50 QVVP12V3S 2 3 63.5 133.4 80.3 5.1 QVVP12V4S 2 1 4 22212 2.50 5.25 3. 6.50 QVVP12V055S 55 QVVP14V060S 60 QVVP14V7S 2 7 69.9 147.3 94.0 174.8 22214 QVVP14V8S 2 1 2 2.75 5.80 3.70 6.88 QVVP14V065S 65 QVVPV211S 2 11 QVVPV212S 2 3 4 QVVPV070S 70 79.5 4.3 106.4 0.2 222 QVVPV215S 2 15 3.13 6.47 4.19 7.88 QVVPV300S 3 QVVPV075S 75 QVVP19V303S 3 3 QVVP19V304S 3 1 4 QVVP19V080S 80 95.3 195.3 1.5 238.3 QVVP19V085S 85 22219 3.75 7.69 4.90 9.38 QVVP19V307S 3 7 QVVP19V308S 3 1 2 QVVP19V090S 90 QVVP22V311S 3 11 QVVP22V312S 3 3 4 104.9 219.7 139.7 255.0 QVVP22V100S 100 22222 4.13 8.65 5.50 10.04 QVVP22V315S 3 15 QVVP22V400S 4 (1) Double-nut (QVV) part number shown. Single-nut (QV) version available upon request. A B C D m D max. F G H J L Rvv Svv Wt. 181.1 7.13 0.2 7.88 219.2 8.63 4.6 9.63 285.8 1 3.0 12.60 225.6 8.88 4.6 9.63 260.4 10.25 295.4 11.63 342.9 13.50 362.0 14.25 62.0 2.44 66.8 2.63 73.7 2.90 76.2 3.00 86.6 3.41 102.6 4.04 35.1 1.38 35.1 1.38 47.8 1.88 50.8 2.00 7 8 1 82.0 3.23 84.6 3.33 88.9 3.50 91.2 3.59 102.1 4.02 1.6 4.59.1 0.79 17.8 0.70 15.2 0.60 15.0 0.59 15.5 0.61 14.0 0.55 102.1 4.02 102.1 4.02 103.9 4.09 106.2 4.18 117.6 4.63 130.3 5.13 kg 6.4 14 7.7 17 10.0 22 12.7 28.4 45 26.8 59 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-75

V-Lock SERIES QVVPL Two-Bolt Pillow Blocks Straight Bore Equivalent QVVPL Two-Bolt Pillow Blocks Straight Bore Equivalent Part (1) QVVPL11V115S 1 15 57.2 122.2 75.9 150.6 QVVPL11V0S 2 22211 2.25 4.81 2.99 5.93 QVVPL11V050S 50 QVVPL12V3S 2 3 63.5 133.4 80.3 5.1 QVVPL12V4S 2 1 4 22212 2.50 5.25 3. 6.50 QVVPL12V055S 55 QVVPL14V060S 60 QVVPL14V7S 2 7 69.9 147.3 94.0 173 22214 QVVPL14V8S 2 1 2 2.75 5.80 3.70 6.81 QVVPL14V065S 65 QVVPLV211S 2 11 QVVPLV212S 2 3 4 QVVPLV070S 70 82.6 7.4 106.4 195.6 222 QVVPLV215S 2 15 3.25 6.59 4.19 7.70 QVVPLV300S 3 QVVPLV075S 75 QVVPL19V303S 3 3 QVVPL19V304S 3 1 4 QVVPL19V080S 80 95.3 195.3 1.5 235.0 QVVPL19V085S 85 22219 3.75 7.69 4.90 9.25 QVVPL19V307S 3 7 QVVPL19V308S 3 1 2 QVVPL19V090S 90 QVVPL22V311S 3 11 QVVPL22V312S 3 3 4 108 223 139.7 255.0 QVVPL22V100S 100 22222 4.25 8.78 5.50 10.04 QVVPL22V315S 3 15 QVVPL22V400S 4 (1) Double-nut (QVV) part number shown. Single-nut (QV) version available upon request. A B C D m D max. F G H J L Rvv Svv Wt. 1.5 6.36 179.3 7.06 189.0 7.44 213.4 8.40 273.1 10.75 3.0 12.60 212.9 8.38 225.6 8.88 235.0 9.25 265.2 10.44 330.2 13.00 362.0 14.25 62.0 2.44 65.5 2.58 73.7 2.90 76.2 3.00 86.6 3.41 102.6 4.04 35.1 1.38 35.1 1.38 47.8 1.88 53.8 2.12 7 8 1 82.0 3.23 83.8 3.30 88.9 3.50 91.2 3.59 102.1 4.02 1.6 4.59.1 0.79 18.3 0.72 15.2 0.60 15.0 0.59 15.5 0.61 14.0 0.55 102.1 4.02 102.1 4.02 103.9 4.09 106.2 4.18 117.6 4.63 130.3 5.13 kg 6.4 14 7.7 17 10.0 22 12.7 28.4 45 26.8 59 C-76 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

V-Lock SERIES QVVPA SAF Two-Bolt Pillow Blocks Tapered Bore Equivalent QVVPA SAF Two-Bolt Pillow Blocks Tapered Bore Equivalent Part (1) QVVPA13V3S 2 3 76.2 151.1 80.3 182.9 QVVPA13V4S 2 1 4 22213 3.00 5.95 3. 7. QVVPA13V055S 55 QVVPA15V060S 60 QVVPA15V7S 2 7 82.6 3.3 94.0 0.2 22215 QVVPA15V8S 2 1 2 3.25 6.43 3.70 7.88 QVVPA15V065S 65 QVVPA17V211S 2 11 QVVPA17V212S 2 3 4 QVVPA17V070S 70 95.3 186 106.4 1.3 22217 QVVPA17V215S 2 15 3.75 7.32 4.19 9.50 QVVPA17V300S 3 QVVPA17V075S 75 QVVPAV303S 3 3 QVVPAV304S 3 1 4 QVVPAV080S 80 114.3 219.2 1.5 276.4 QVVPAV085S 85 222 4.50 8.63 4.90 10.88 QVVPAV307S 3 7 QVVPAV308S 3 1 2 QVVPAV090S 90 QVVPA22V311S 3 11 QVVPA22V312S 3 3 4 125.5 0.5 139.7 317.5 QVVPA22V100S 100 22222 4.94 9.47 5.50 12.50 QVVPA22V315S 3 15 QVVPA22V400S 4 QVVPA26V110S 110 QVVPA26V407S 4 7 152.4 284.0 174.8 362.0 22226 QVVPA26V408S 4 1 2 6.00 11.18 6.88 14.25 QVVPA26V115S 115 QVVPA28V125S 125 QVVPA28V415S 4 15 152.4 290.8 190.0 384.3 22228 QVVPA28V500S 5 6.00 11.45 7.48 15.13 QVVPA28V130S 130 (1) Double-nut (QVV) part number shown. Single-nut (QV) version available upon request. A B C D m D max. F G H J L Rvv Svv Wt. 233.7 9. 4.6 9.63 279.4 1 327.2 12.88 368.3 14.50 400.1 15.75 447.8 17.63 261.9 10.31 276.4 10.88 3.8 12.63 368.3 14.50 406.4.00 444.5 17.50 499.9 19.68 68.6 2.70 68.6 2.70 76.2 3.00 86.9 3.42 100.6 3.96 128 5.04 85.6 3.37 31.2 1.23 33.8 1.33 41.4 1.63 50.8 2.00 51.8 2.04 51.8 2.04 7 8 7 8 1 30 1 1 4 85.3 3.36 86.4 3.40 91.2 3.59 102.4 4.03 115.6 4.55 153.2 6.03 132.0 5..8 0.66 17.8 0.70 15.0 0.59 15.5 0.61 15.0 0.59 25.1 0.99 46.5 1.83 102.1 4.02 103.9 4.09 106.2 4.18 117.6 4.63 130.3 5.13 178.3 7.02 178.3 7.02 kg 10.4 23 12.2 27 15.0 33 29.5 65 38.1 84 61.7 136 61.8 136 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-77

V-Lock SERIES QVVPN SN-STYLE Two-Bolt Pillow Blocks Tapered Bore Equivalent QVVPN SN-STYLE Two-Bolt Pillow Blocks Tapered Bore Equivalent Part (1) QVVPN11V115S QVVPN11V0S QVVPN11V050S 1 15 2 50 22211 QVVPN12V055S 55 22212 QVVPN13V3S QVVPN13V4S 2 3 2 1 4 22213 QVVPN14V060S 60 22214 QVVPN15V7S QVVPN15V8S QVVPN15V065S QVVPNV211S QVVPNV212S QVVPNV070S QVVPN17V215S QVVPN17V300S QVVPN17V075S QVVPN19V303S QVVPN19V304S QVVPN19V080S 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 22215 222 22217 22219 QVVPN19V085S 85 22219 QVVPNV307S QVVPNV308S QVVPNV090S QVVPN22V311S QVVPN22V312S QVVPN22V100S QVVPN22V315S QVVPN22V400S 3 7 3 1 2 90 3 11 3 3 4 100 3 15 4 222 22222 QVVPNV110S 110 222 A B C D m D max. F G H J L Rvv Svv Wt. 69.9 2.750 70.0 2.756 80.0 3.150 80.0 3.150 80.0 3.150 95.0 3.74 95.3 3.750 100.0 3.937 112.0 4.409 112.0 4.409 125.0 4.921 140.0 5.512 135.4 5.33 140.5 5.53 154.9 6.10 154.9 6.10 0.8 6.33 180.3 7.10 185.9 7.32 195.3 7.69 212.3 8.36 2.9 8.54 0.5 9.47 262.9 10.35 75.9 2.99 80.0 3.15 80.3 3. 94.0 3.70 94.0 3.70 106.0 4.17 106.4 4.19 1.0 4.88 1.0 4.88 1.5 4.90 139.7 5.50 174.8 6.88 5.1 6.50 177.8 7.00 182.9 7. 182.9 7. 0.2 7.88 235.0 9.25 1.3 9.50 285.8 1 285.8 1 276.4 10.88 317.5 12.50 344.4 13.56 221.0 8.70 219.2 8.63 233.7 9. 233.7 9. 4.6 9.63 266.7 10.50 279.4 1 295.4 11.63 295.4 11.63 327.2 12.88 368.3 14.50 355.6 14.00 QVVPN26V407S 4 7 150.0 281.7 174.8 367.3 400.1 QVVPN26V408S 4 1 2 22226 5.906 11.09 6.88 14.46 15.75 QVVPN26V115S 115 QVVPN28V125S 125 QVVPN28V415S 4 15 150.0 288.5 190.0 384.3 447.8 22228 QVVPN28V500S 5 5.906 11.36 7.48 15.13 17.63 QVVPN28V130S 130 (1) Double-nut (QVV) part number shown. Single-nut (QV) version available upon request. 251.0 9.88 254.0 10.00 261.9 10.31 261.9 10.31 276.4 10.88 315.0 12.40 3.8 12.63 346.2 13.63 346.2 13.63 368.3 14.50 406.4.00 409.7.13 444.5 17.50 499.9 19.68 60.5 2.38 60.5 2.38 68.6 2.70 68.6 2.70 68.6 2.70 72.6 2.86 76.2 3.00 79.8 3.14 82.8 3.26 86.9 3.42 100.6 3.96 97.8 3.85 128.0 5.04 85.6 3.37 35.1 1.38 35.1 1.38 29.2 1.15 33.8 1.33 38.9 1.53 38.9 1.53 38.9 1.53 50.8 2.00 50.8 2.00 49.3 1.94 49.3 1.94 7 8 7 8 7 8 1 30 1 1 4 81.3 3. 81.3 3. 85.3 3.36 86.4 3.40 86.4 3.40 89.4 3.52 91.2 3.59 99.1 3.90 100.6 3.96 102.4 4.03 115.6 4.55 138.2 5.44 153.2 6.03 132.0 5..8 0.82.8 0.82.8 0.66 17.8 0.70 17.8 0.70.8 0.66 15.0 0.59 19.3 0.76 17.8 0.70 15.5 0.61 15.0 0.59 40.4 1.59 25.1 0.99 46.5 1.83 102.1 4.02 102.1 4.02 102.1 4.02 104.0 4.09 103.9 4.09 106.0 4.17 106.2 4.18 118.1 4.65 118.1 4.65 117.6 4.63 130.3 5.13 178.3 7.02 178.3 7.02 178.3 7.02 kg 7.7 17 9.1 10.4 23 10.4 23 12.2 27 13.6 30 15.0 33 22.2 49 23.1 51 29.5 65 38.1 84 49.9 110 61.7 136 61.8 136 C-78 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

V-Lock SERIES QVVSN SN-STYLE Two-Bolt Pillow Blocks Pure Metric Design QVVSN SN-STYLE Two-Bolt Pillow Blocks Pure Metric Design Part (1) QVVSN11V115S QVVSN11V0S QVVSN11V050S QVVSN12V3S QVVSN12V4S QVVSN12V055S QVVSN14V060S QVVSN14V7S QVVSN14V8S QVVSN14V065S QVVSNV211S QVVSNV212S QVVSNV070S QVVSNV215S QVVSNV300S QVVSNV075S QVVSN19V303S QVVSN19V304S QVVSN19V080S 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 22211 22212 22214 222 22219 QVVSN19V085S 85 22219 QVVSN19V307S QVVSN19V308S QVVSN19V090S QVVSN22V311S QVVSN22V312S QVVSN22V100S QVVSN22V315S QVVSN22V400S 3 7 3 1 2 90 3 11 3 3 4 100 3 15 4 22219 22222 QVVSN26V110S 110 22226 QVVSN26V407S QVVSN26V408S QVVSN26V115S QVVSN28V125S QVVSN28V415S QVVSN28V500S QVVSN28V130S 4 7 4 1 2 115 125 4 15 5 130 22226 22228 A B C D m D max. F G H J L Rvv Svv Wt. 70 2.76 70 2.76 80 3.15 95 3.74 100 3.94 112 4.41 112 4.41 125 4.92 140 5.51 150 5.91 150 5.91 136 5.35 141 5.55 157 6.18 183 7.2 0 7.87 212 8.34 212 8.34 1 9.49 270 10.63 280 11.02 290 11.41 76 2.99 80 3.15 94 3.70 106 4.17 1 4.88 1 4.88 1 4.88 140 5.51 175 6.89 175 6.89 190 7.48 183 7. 183 7. 196 7.72 1 9.49 279 10.98 279 10.98 290 11.42 319 12.56 332 13.07 367 14.45 402 15.83 (1) Double-nut (QVV) part number shown. Single-nut (QV) version available upon request. 2 8.50 2 8.50 235 9.25 279 10.98 292 11.50 292 11.50 327 12.87 366 14.41 365 14.37 400 15.75 435 17.13 254 10.00 254 10.00 275 10.83 3 12.44 345 13.58 345 13.58 380 14.96 410.14 410.14 445 17.52 500 19.68 68 2.68 68 2.68 74 2.91 76 2.99 86 3.39 86 3.39 86 3.39 101 3.98 113 4.45 113 4.45 117 4.61 25 25 35 1.38 34 1.33 39 1.53 39 1.53 39 1.53 50 2.00 39 1.53 49 1.92 49 1.92 7 8 7 8 7 8 7 8 30 1 1 4 85 3.35 85 3.35 89 3.50 91 3.58 102 4.02 102 4.02 102 4.02 1 4.57 146 5.75 146 5.75 148 5.83 17 0.67 17 0.67 15 0.59 15 0.59 0.63 0.63 0.63 15 0.59 33 1.30 33 1.30 31 1.22 102 4.02 102 4.02 104 4.09 106 4.17 118 4.65 118 4.65 118 4.65 130 5.12 178 7.01 178 7.01 178 7.01 kg 13.2 29 13.2 29.8 37.9 46 56 56 56 35.8 79 39.9 88 39.9 88 39.9 88 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-79

V-Lock SERIES QVVPKT 9000 SERIES Two-Bolt Pillow Blocks Tapered Bore Equivalent QVVPKT 9000 SERIES Two-Bolt Pillow Blocks Tapered Bore Equivalent Part (1) 2 3 2 1 4 55 60 2 7 2 1 2 65 QVVPKT13V3S 76.2 153.7 80.3 194.6 QVVPKT13V4S 22213 3.00 6.05 3. 7.66 QVVPKT13V055S QVVPKT15V060S QVVPKT15V7S 88.9 173.7 94.0 230.1 22215 QVVPKT15V8S 3.50 6.84 3.70 9.06 QVVPKT15V065S (1) Double-nut (QVV) part number shown. Single-nut (QV) version available upon request. A B C D m D max. F G H J L Rvv Svv Wt. 223.0 8.78 265.2 10.44 285.8 1 330.2 13.00 73.7 2.90 75.7 2.98 35.1 1.38 35.1 1.38 7 8 87.9 3.46 89.9 3.54 14.2 0.56 14.2 0.56 102.1 4.02 103.9 4.09 kg 10.0 22 12.7 28 C-80 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

V-Lock SERIES QVVPF Four-Bolt Pillow Blocks Straight Bore Equivalent QVVPF Four-Bolt Pillow Blocks Straight Bore Equivalent Part (1) QVVPF14V060S 60 QVVPF14V7S 2 7 69.9 147.3 94.0 174.8 22214 QVVPF14V8S 2 1 2 2.75 5.80 3.70 6.88 QVVPF14V065S 65 QVVPFV211S 2 11 QVVPFV212S 2 3 4 QVVPFV070S 70 82.6 7.4 106.4 193.0 222 QVVPFV215S 2 15 3.25 6.59 4.19 7.60 QVVPFV300S 3 QVVPFV075S 75 QVVPF19V303S 3 3 QVVPF19V304S 3 1 4 QVVPF19V080S 80 95.3 195.3 1.5 225.6 QVVPF19V085S 85 22219 3.75 7.69 4.90 8.88 QVVPF19V307S 3 7 QVVPF19V308S 3 1 2 QVVPF19V090S 90 QVVPF22V311S 3 11 QVVPF22V312S 3 3 4 108.0 223.0 139.7 276.4 QVVPF22V100S 100 22222 4.25 8.78 5.50 10.88 QVVPF22V315S 3 15 QVVPF22V400S 4 QVVPF26V110S 110 QVVPF26V407S 4 7 1.7 250.7 174.8 301.8 22226 QVVPF26V408S 4 1 2 4.75 9.87 6.88 11.88 QVVPF26V115S 115 QVVPF28V125S 125 QVVPF28V415S 4 15 139.7 279.7 190.0 349.3 22228 QVVPF28V500S 5 5.50 11.01 7.48 13.75 QVVPF28V130S 130 (1) Double-nut (QVV) part number shown. Single-nut (QV) version available upon request. A B C D m D max. E F G H J L Rvv Svv Wt. 193.8 7.63 231.1 9.10 276.4 10.88 339.9 13.38 368.3 14.50 403.4 15.88 44.5 1.75 47.8 1.88 50.8 2.00 57.2 2.25 63.5 2.50 69.9 2.75 235.0 9.25 265.2 10.44 312.4 12.30 378.0 14.88 409.7.13 444.5 17.50 76.2 3.00 79.5 3.13 95.3 3.75 109.5 4.31 1.7 4.75 128.0 5.04.9 0.98 32.8 1.29 39.6 1.56 35.6 1.40 40.1 1.58 39.1 1.54 7 8 90.2 3.55 93.0 3.66 106.4 4.19 119.9 4.72 149.6 5.89 153.2 6.03 15.2 0.60 15.2 0.60 14.5 0.57 14.7 0.58 32.8 1.29 31.5 1. 103.9 4.09 106.2 4.18 117.6 4.63 130.3 5.13 178.3 7.02 178.3 7.02 kg 9.1 12.2 27 22.2 49 30.4 67 37.2 82 60.8 134 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-81

V-Lock SERIES QVVPR Four-Bolt Pillow Blocks Straight Bore Equivalent QVVPR Four-Bolt Pillow Blocks Straight Bore Equivalent Part (1) QVVPR14V060S 60 QVVPR14V7S 2 7 69.9 147.3 94.0 181.1 22214 QVVPR14V8S 2 1 2 2.75 5.80 3.70 7.13 QVVPR14V065S 65 QVVPRV211S 2 11 QVVPRV212S 2 3 4 QVVPRV070S 70 79.5 4.3 106.4 3.2 222 QVVPRV215S 2 15 3.13 6.47 4.19 8.00 QVVPRV300S 3 QVVPRV075S 75 QVVPR19V303S 3 3 QVVPR19V304S 3 1 4 QVVPR19V080S 80 95.3 195.3 1.5 235.0 QVVPR19V085S 85 22219 3.75 7.69 4.90 9.25 QVVPR19V307S 3 7 QVVPR19V308S 3 1 2 QVVPR19V090S 90 (1) Double-nut (QVV) part number shown. Single-nut (QV) version available upon request. A B C D m D max. E F G H J L Rvv Svv Wt. 222.2 8.75 3.8 9.60 285.8 1 47.8 1.88 54.1 2.13 60.5 2.38 260.4 10.25 275.1 10.83 346.2 13.63 82.6 3.25 85.9 3.38 95.3 3.75.9 0.98 29.5 1. 39.6 1.56 93.2 3.67 96.0 3.78 106.4 4.19 15.2 0.60 15.2 0.60 14.5 0.57 103.9 4.09 106.2 4.18 117.6 4.63 kg 9.1 12.2 27 22.2 49 C-82 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

V-Lock SERIES QVVPX 5000 SERIES Four-Bolt Pillow Blocks Straight Bore Equivalent QVVPX 5000 SERIES Four-Bolt Pillow Blocks Straight Bore Equivalent Part (1) QVVPX14V060S 60 QVVPX14V7S 2 7 76.2 153.7 94.0 176.3 22214 QVVPX14V8S 2 1 2 3.00 6.05 3.70 6.94 QVVPX14V065S 65 QVVPXV211S 2 11 QVVPXV212S 2 3 4 QVVPXV070S 70 88.9 173.5 106.4 230.1 222 QVVPXV215S 2 15 3.50 6.83 4.19 9.06 QVVPXV300S 3 QVVPXV075S 75 QVVPX19V303S 3 3 QVVPX19V304S 3 1 4 QVVPX19V080S 80 101.6 1.2 1.5 274.6 QVVPX19V085S 85 22219 4.00 7.92 4.90 10.81 QVVPX19V307S 3 7 QVVPX19V308S 3 1 2 QVVPX19V090S 90 QVVPX22V311S 3 11 QVVPX22V312S 3 3 4 127.0 239.8 139.7 317.5 QVVPX22V315S 3 15 22222 5.00 9.44 5.50 12.50 QVVPX22V400S 4 QVVPX22V100S 100 QVVPX26V110S 110 QVVPX26V407S 4 7 146.1 273.8 174.8 354.1 22226 QVVPX26V408S 4 1 2 5.75 10.78 6.88 13.94 QVVPX26V115S 115 QVVPX28V125S 125 QVVPX28V415S 4 15 155.6 293.4 190.0 387.4 22228 QVVPX28V500S 5 6.125 11.55 7.48 15.25 QVVPX28V130S 130 (1) Double-nut (QVV) part number shown. Single-nut (QV) version available upon request. A B C D m D max. E F G H J L Rvv Svv Wt. 2.8 9.56 265.2 10.44 309.6 12.19 355.6 14.00 395.2 15.56 452.5.75 66.8 2.63 69.9 2.75 76.2 3.00 88.9 3.50 101.6 4.00 108.0 4.25 285.8 1 330.2 13.00 381.0 15.00 425.5.75 469.9 18.50 514.4.25 98.6 3.88 108.0 4.25 1.7 4.75 139.7 5.50 158.8 6.25 171.5 6.75 31.0 1.22 39.1 1.54 38.1 1.50 41.4 1.63 45.7 1.80 50.8 2.00 7 8 1 1 1 8 101.3 3.99 107.2 4.22 119.1 4.69 135.1 5.32 8.7 6.64 175.0 6.89 15.2 0.60 14.2 0.56 14.5 0.57 15.2 0.60 38.4 1.51 30.7 1.21 103.9 4.09 106.2 4.18 117.6 4.63 130.3 5.13 178.3 7.02 178.3 7.02 kg 10.4 23 12.7 28 22.2 49 30.4 67 37.2 82 61.7 136 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-83

V-Lock SERIES QVVPXT 5000 SERIES Two-Bolt Pillow Blocks Straight Bore Equivalent QVVPXT 5000 SERIES Two-Bolt Pillow Blocks Straight Bore Equivalent Part (1) Size QVVPXT14V060S 60 QVVPXT14V7S 2 7 76.2 153.7 94.0 194.6 22214 QVVPXT14V8S 2 1 2 3.00 6.05 3.70 7.66 QVVPXT14V065S 65 QVVPXTV211S 2 11 QVVPXTV212S 2 3 4 QVVPXTV070S 70 88.9 173.7 106.4 230.1 222 QVVPXTV215S 2 15 3.50 6.84 4.19 9.06 QVVPXTV300S 3 QVVPXTV075S 75 (1) Double-nut (QVV) part number shown. Single-nut (QV) version available upon request. A B C D m D max. F G H J L Rvv Svv Wt. 233.0 8.78 265.2 10.44 285.8 1 330.2 13.00 73.7 2.90 75.7 2.98 35.1 1.38 35.1 1.38 7 8 88.9 3.50 90.9 3.58 15.2 0.60 15.2 0.60 103.9 4.09 106.2 4.18 kg 10.0 22 12.7 28 C-84 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

V-Lock SERIES QVVPG SN-STYLE Four-Bolt Pillow Blocks Tapered Bore Equivalent QVVPG SN-STYLE Four-Bolt Pillow Blocks Tapered Bore Equivalent Part (1) QVVPG11V115S QVVPG11V0S QVVPG11V050S 1 15 2 50 22211 QVVPG12V055S 55 22212 QVVPG13V3S QVVPG13V4S 2 3 2 1 4 22213 QVVPG14V060S 60 22214 QVVPG15V7S QVVPG15V8S QVVPG15V065S QVVPGV211S QVVPGV212S QVVPGV070S QVVPG17V215S QVVPG17V300S QVVPG17V075S QVVPG19V303S QVVPG19V304S QVVPG19V080S 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 22215 222 22217 22219 QVVPG19V085S 85 22219 QVVPGV307S QVVPGV308S QVVPGV090S QVVPG22V311S QVVPG22V312S QVVPG22V100S QVVPG22V315S QVVPG22V400S 3 7 3 1 2 90 3 11 3 3 4 100 3 15 4 222 22222 QVVPGV110S 110 222 A B C D m D max. E F G H J L Rvv Svv Wt. 69.9 2.75 70.0 2.756 80.0 3.15 80.0 3.15 80.0 3.15 95.0 3.74 95.0 3.74 100.0 3.937 112.0 4.409 112.0 4.409 125.0 4.921 140.0 5.512 134.9 5.31 140.5 5.53 154.9 6.10 154.9 6.10 2.1 6.38 180.3 7.10 182.9 7. 195.3 7.69 212.3 8.36 214.6 8.45 238.3 9.38 262.9 10.35 75.9 2.99 80.0 3.15 80.3 3. 94.0 3.70 94.0 3.70 105.9 4.17 106.4 4.19 1.0 4.88 1.0 4.88 1.5 4.90 139.7 5.50 174.8 6.88 182.4 7.18 177.8 7.00 182.4 7.18 182.4 7.18 1.7 7.94 235.0 9.25 0.0 9.44 282.7 11.13 282.7 11.13 276.4 10.88 301.8 11.88 342.9 13.50 QVVPG26V407S 4 7 150.0 281.7 174.8 367.3 QVVPG26V408S 4 1 2 22226 5.906 11.09 6.88 14.46 QVVPG26V115S 115 QVVPG28V125S 125 QVVPG28V415S 4 15 150.0 288.5 190.0 384.3 22228 QVVPG28V500S 5 5.906 11.36 7.48 15.13 QVVPG28V130S 130 (1) Double-nut (QVV) part number shown. Single-nut (QV) version available upon request. 217.4 8.56 219.2 8.63 217.4 8.56 217.4 8.56 6.1 9.69 266.7 10.50 287.3 11.31 298.5 11.75 298.5 11.75 339.9 13.38 368.3 14.50 355.6 14.00 400.1 15.75 447.8 17.63 39.9 1.57 35.1 1.38 48.0 1.89 48.0 1.89 39.6 1.56 50.0 1.97 52.3 2.06 50.0 1.97 50.0 1.97 60.5 2.38 69.9 2.75 70.1 2.76 81.0 3.19 80.0 3.15 251.0 9.88 254.0 10.00 261.9 10.31 261.9 10.31 276.4 10.88 315.0 12.4 3.8 12.63 344.9 13.58 344.9 13.58 381.0 15.00 409.7.13 410.0.14 444.5 17.50 500.4 19.70 68.6 2.70 69.9 2.75 82.6 3.25 82.6 3.25 79.5 3.13 89.9 3.54 92.2 3.63 100.1 3.94 100.1 3.94 109.5 4.31 1.7 4.75 1.7 4.75 128.0 5.04 128.0 5.04 35.1 1.38 35.1 1.38 30.2 1.19 39.6 1.56 39.6 1.56 39.6 1.56 44.5 1.75 50.8 2.00 49.3 1.94 49.3 1.94 12 1 2 1 1 85.3 3.36 86.1 3.39 92.5 3.64 93.2 3.67 91.7 3.61 98.0 3.86 99.3 3.91 109.2 4.30 109.2 4.30 113.5 4.47 125.5 4.94 149.6 5.89 153.2 6.03 152.9 6.02.8 0.82.8 0.82 17.0 0.67 86.1 3.39 15.7 0.62.8 0.66 15.0 0.59 19.3 0.76 17.8 0.70 11.2 0.44 14.5 0.57 40.4 1.59 36.6 1.44 102.1 4.02 102.1 4.02 102.1 4.02 103.9 4.09 103.9 4.09 105.9 4.17 106.2 4.18 118.1 4.65 118.1 4.65 117.6 4.63 130.3 5.13 178.3 7.02 178.3 7.02 178.3 7.02 kg 8.6 19 9.9 22 11.3 25 11.3 25 13.2 29 14.9 33.8 37.5 54 56 70 39.5 87 49.9 110 61.7 136 61.7 136 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-85

V-Lock SERIES QVVPH SAF-STYLE Four-Bolt Pillow Blocks Tapered Bore Equivalent QVVPH SAF-STYLE Four-Bolt Pillow Blocks Tapered Bore Equivalent Part (1) QVVPH11V115S 1 15 69.9 134.9 75.9 182.4 QVVPH11V0S 2 22211 2.75 5.31 2.99 7.18 QVVPH11V050S 50 QVVPH13V3S 2 3 76.2 151.1 80.3 182.4 QVVPH13V4S 2 1 4 22213 3.00 5.95 3. 7.18 QVVPH13V055S 55 QVVPH15V060S 60 QVVPH15V7S 2 7 82.6 2.1 94.0 1.7 22215 QVVPH15V8S 2 1 2 3.25 6.38 3.70 7.94 QVVPH15V065S 65 QVVPH17V211S 2 11 QVVPH17V212S 2 3 4 QVVPH17V070S 70 95.3 182.9 106.4 0.0 22217 QVVPH17V215S 2 15 3.75 7. 4.19 9.44 QVVPH17V300S 3 QVVPH17V075S 75 QVVPHV303S 3 3 QVVPHV304S 3 1 4 QVVPHV080S 80 114.3 2.9 1.5 276.4 QVVPHV085S 85 222 4.50 8.54 4.90 10.88 QVVPHV307S 3 7 QVVPHV308S 3 1 2 QVVPHV090S 90 QVVPH22V311S 3 11 QVVPH22V312S 3 3 4 125.5 238.3 139.7 301.8 QVVPH22V100S 100 22222 4.94 9.38 5.50 11.88 QVVPH22V315S 3 15 QVVPH22V400S 4 QVVPH26V110S 110 QVVPH26V407S 4 7 152.4 284.0 174.8 362.0 22226 QVVPH26V408S 4 1 2 6.00 11.18 6.88 14.25 QVVPH26V115S 115 QVVPH28V125S 125 QVVPH28V415S 4 15 152.4 290.8 190.0 406.4 22228 QVVPH28V500S 5 6.00 11.45 7.48.00 QVVPH28V130S 130 (1) Double-nut (QVV) part number shown. Single-nut (QV) version available upon request. A B C D m D max. E F G H J L Rvv Svv Wt. 217.4 8.56 217.4 8.56 6.1 9.69 287.3 11.31 339.9 13.38 368.3 14.50 400.1 15.75 435.1 17.13 39.9 1.57 50.8 2.00 47.8 1.88 54.1 2.13 60.5 2.38 69.9 2.75 82.6 3.25 85.9 3.38 251.0 9.88 261.9 10.31 276.4 10.88 3.8 12.63 381.0 15.00 406.4.00 444.5 17.50 500.4 19.70 68.6 2.70 82.6 3.25 79.5 3.13 92.2 3.63 109.5 4.31 1.7 4.75 128.0 5.04 128.0 5.04 31.2 1.23 32.8 1.29 32.0 1.26 41.9 1.65 45.0 1.77 51.8 2.04 51.8 2.04 12 1 2 12 1 2 1 85.3 3.36 92.5 3.64 91.7 3.61 99.3 3.91 113.5 4.47 125.5 4.94 153.2 6.03 152.9 6.02.8 0.82 17.0 0.67 18.0 0.71 15.0 0.59 11.2 0.44 14.5 0.57 36.6 1.44 102.1 4.02 102.1 4.02 103.9 4.09 106.2 4.18 117.6 4.63 130.3 5.13 178.3 7.02 178.3 7.02 kg 8.6 19 11.3 25 13.2 29.8 37 70 39.5 87 61.7 136 61.7 136 C-86 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

V-Lock SERIES QVVPK 9000 SERIES Four-Bolt Pillow Blocks Tapered Bore Equivalent QVVPK 9000 SERIES Four-Bolt Pillow Blocks Tapered Bore Equivalent Part (1) QVVPK15V060S 60 QVVPK15V7S 2 7 88.9 176.0 94.0 230.1 22215 QVVPK15V8S 2 1 2 3.50 6.83 3.70 9.06 QVVPK15V065S 65 QVVPK17V211S 2 11 QVVPK17V212S 2 3 4 QVVPK17V070S 70 101.6 1.2 106.4 274.6 22217 QVVPK17V215S 2 15 4.00 7.92 4.19 10.81 QVVPK17V300S 3 QVVPK17V075S 75 QVVPKV303S 3 3 QVVPKV304S 3 1 4 QVVPKV080S 80 127.0 0.0 1.5 317.5 QVVPKV085S 85 222 5.00 9.44 4.90 12.50 QVVPKV307S 3 7 QVVPKV308S 3 1 2 QVVPKV090S 90 QVVPK22V311S 3 11 QVVPK22V312S 3 3 4 146.1 273.8 139.7 354.1 QVVPK22V100S 100 22222 5.75 10.78 5.50 13.94 QVVPK22V315S 3 15 QVVPK22V400S 4 QVVPK26V110S 110 QVVPK26V407S 4 7 155.7 283.2 174.8 387.4 22226 QVVPK26V408S 4 1 2 6.13 11.15 6.88 15.25 QVVPK26V115S 115 (1) Double-nut (QVV) part number shown. Single-nut (QV) version available upon request. A B C D m D max. E F G H J L Rvv Svv Wt. 265.2 10.44 309.6 12.19 355.6 14.00 395.2 15.56 425.5.75 69.9 2.75 76.2 3.00 88.9 3.50 101.6 4.00 108.0 4.25 330.2 13.00 381.0 15.00 425.5.75 469.9 18.50 514.4.25 108.0 4.25 1.7 4.75 139.7 5.50 158.8 6.25 171.5 6.75 39.1 1.54 38.1 1.50 41.4 1.63 45.7 1.80 50.8 2.00 7 8 1 1 105.9 4.17 113.5 4.47 128.8 5.07 138.4 5.45 175.3 6.90 12.6 0.51 8.64 0.34 8.9 0.35 14.5 0.57 31.5 1. 103.9 4.09 106.2 4.18 117.6 4.63 130.3 5.13 178.3 7.02 kg 13.2 29.8 37 70 39.5 87 61.7 136 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-87

V-Lock SERIES QVF and QVVF Square Flange Blocks Straight Bore Equivalent QVF and QVVF Square Flange Blocks Straight Bore Equivalent QV Single-Nut Unit (1) QVV Double-Nut Unit (1) Part (1)(2) QVF11V115S QVF11V0S QVF11V050S QVF12V3S QVF12V4S QVF12V055S QVF14V060S QVF14V7S QVF14V8S QVF14V065S QVFV211S QVFV212S QVFV070S QVFV215S QVFV300S QVFV075S QVF19V303S QVF19V304S QVF19V080S QVF19V085S QVF19V307S QVF19V308S QVF19V090S QVF22V311S QVF22V312S QVF22V100S QVF22V315S QVF22V400S QVF26V110S QVF26V407S QVF26V408S QVF26V115S 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 11 3 3 4 100 3 15 4 110 4 7 4 1 2 115 22211 22212 22214 222 22219 22222 22226 C D E B.C. F H J 75.9 2.99 80.3 3. 94.0 3.70 106.4 4.19 1.5 4.90 139.7 5.50 174.8 6.88 1.7 4.75 130.3 5.13 146.1 5.75 8.9 6.65 193.8 7.63 2.0 8.82 256.8 10.11 111.3 4.38 1.0 4.88 136.7 5.38 152.4 6.00 177.8 7.00 196.9 7.75 222.3 8.75 157.0 6.18 175.0 6.89 193.0 7.60 215.4 8.48 251.7 9.91 278.4 10.96 314.5 12.38 139.7 5.50 157.2 6.19 8.4 6.63 189.0 7.44 219.2 8.63 22.4 0.88 26.9 1.06 33.3 1.31 12 1 2 L FIX 84.1 3.31 84.3 3.32 85.1 3.35 87.6 3.45 98.3 3.87 L EXP N Rv (1) Rvv Sv (1) Svv Wt. (1) part numbers use QV to designate single-nut units (uses Rv and Sv dimensions) and QVV to designate double-nut units (uses Rvv and Svv dimensions). (2) Single-nut (QV) part number shown. Double-nut (QVV) version available upon request. 253.2 9.97 276.4 10.88 38.1 1.50 38.1 1.50 7 8 7 8 114.0 4.49 140.5 5.53 86.1 3.39 86.4 3.40 87.1 3.43 89.7 3.53 100.3 3.95 1.1 4.57 142.7 5.62 65.0 2.56 66.8 2.63 72.4 2.85 75.7 2.98 84.1 3.31 103.1 4.06 106.9 4.21 4.1 0. 4.6 0.18 4.1 0. 4.1 0. 4.6 0.18 9.1 0.36 7.4 0.29 18.3 0.72 17.8 0.70.0 0.63.3 0.64 15.7 0.62 12.7 0.50 37.8 1.49 79.8 3.14 79.8 3.14 81.0 3.19 83.6 3.29 93.7 3.69 104.9 4.13 147.8 5.82 102.1 4.02 102.1 4.02 101.3 3.99 103.6 4.08 114.0 4.49 126.7 4.99 178.3 7.02 kg 5.0 11 6.4 14 7.7 17 10.4 23 15.9 35.9 55 28.6 63 C-88 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

V-Lock SERIES QVFB and QVVFB Flange Blocks Tapered Adapter Equivalent QVFB and QVVFB Flange Blocks Tapered Adapter Equivalent QV Single-Nut Unit (1) QVV Double-Nut Unit (1) Part (1)(2) QVFB15V060S QVFB15V7S QVFB15V8S QVFB15V065S QVFB17V211S QVFB17V212S QVFB17V070S QVFB17V215S QVFB17V300S QVFB17V075S QVFBV303S QVFBV304S QVFBV080S QVFBV085S QVFBV307S QVFBV308S QVFBV090S QVFB22V311S QVFB22V312S QVFB22V100S QVFB22V315S QVFB22V400S QVFB26V110S QVFB26V407S QVFB26V408S QVFB26V115S 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 11 3 3 4 100 3 15 4 110 4 7 4 1 2 115 22215 22217 222 22222 22226 A B.C. C D E F G H J L N Rv (1) Rvv Sv (1) Svv Wt. 255.0 10.04 282.4 11.12 330.2 13.00 367.0 14.45 4.1.38 215.1 8.47 0.0 9.45 279.9 11.02 309.9 12. 355.1 13.98 94.0 3.70 106.4 4.19 1.5 4.90 139.7 5.50 174.8 6.88 9.9 6.69 190.0 7.48 230.1 9.06 255.0 10.04 290.1 11.42 152.4 6.00 9.7 6.68 197.9 7.79 219.2 8.63 251.0 9.88 (1) part numbers use QV to designate single-nut units (uses Rv and Sv dimensions) and QVV to designate double-nut units (uses Rvv and Svv dimensions). (2) Single-nut (QV) part number shown. Double-nut (QVV) version available upon request. 192.0 7.56 212.1 8.35 7.9 9.76 274.3 10.80 298.5 11.75 44.5 1.75 41.9 1.65 23.9 0.94 28.7 1.13 26.4 1.04 32.0 1.26 7 8 81.5 3.21 83.8 3.30 106.7 4. 112.0 4.41 148.3 5.84 64.8 2.55 69.9 2.75 94.2 3.71 101.1 3.98 114.3 4.50 0.8 0.03 1.0 0.04 11.4 0.45 7.4 0.29 0.5 0.02 22.4 0.88 22.4 0.88 10.9 0.43 14.7 0.58 30.0 1.18 82.6 3.25 84.6 3.33 95.3 3.75 104.9 4.13 147.8 5.82 103.9 4.09 106.2 4.18 117.3 4.62 126.7 4.99 178.3 7.02 kg 11.3 25 13.6 30 18.1 40 27.2 60 42.6 94 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-89

V-Lock SERIES QVFC and QVVFC Piloted Flange Cartridges Tapered Adapter Equivalent QVFC and QVVFC Piloted Flange Cartridges Tapered Adapter Equivalent QV Single-Nut Unit (1) QVV Double-Nut Unit (1) Part (1)(2) QVFC15V060S QVFC15V7S QVFC15V8S QVFC15V065S QVFC17V211S QVFC17V212S QVFC17V070S QVFC17V215S QVFC17V300S QVFC17V075S QVFCV303S QVFCV304S QVFCV080S QVFCV085S QVFCV307S QVFCV308S QVFCV090S QVFC22V311S QVFC22V312S QVFC22V100S QVFC22V315S QVFC22V400S QVFC26V110S QVFC26V407S QVFC26V408S QVFC26V115S 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 11 3 3 4 100 3 15 4 110 4 7 4 1 2 115 22215 22217 222 22222 22226 A B.C. C D (3) E F G H J L N Rv (1) Rvv Sv (1) Svv Wt. 255.0 10.04 282.4 11.12 330.2 13.00 367.0 14.45 4.1.38 215.1 8.47 0.0 9.45 279.9 11.02 309.9 12. 355.1 13.98 94.0 3.70 106.4 4.19 1.5 4.90 139.7 5.50 174.8 6.88 9.9 6.690 190.0 7.480 230.1 9.060 255.0 10.040 290.0 11.417 152.4 6.00 9.7 6.68 197.9 7.79 219.2 8.63 251.0 9.88 (1) part numbers use QV to designate single-nut units (uses Rv and Sv dimensions) and QVV to designate double-nut units (uses Rvv and Svv dimensions). (2) Single-nut (QV) part number shown. Double-nut (QVV) version available upon request. (3) Pilot tolerance: +0/-0.05 (+0/-0.002 ). 192.0 7.56 212.1 8.35 7.9 9.76 274.3 10.80 298.5 11.75 44.5 1.75 41.9 1.65 23.9 0.94 28.7 1.13 26.4 1.04 32.0 1.26 7 8 87.1 3.43 91.7 3.61 105.2 4.14 112.8 4.44 144.3 5.68 64.8 2.55 69.9 2.75 94.2 3.71 101.1 3.98 114.3 4.50 4.6 0.18 6.6 0.26 9.7 0.38 8.1 0.32 3.6 0.14.8 0.66 14.5 0.57 12.4 0.49 5.8 0.23 34.0 1.34 82.6 3.25 84.6 3.33 95.3 3.75 104.9 4.13 147.8 5.82 103.9 4.09 106.2 4.18 117.3 4.62 126.7 4.99 178.3 7.02 kg 11.3 25 13.6 30 18.1 40 27.2 60 42.6 94 C-90 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

V-Lock SERIES QVFL and QVVFL Square Flange Blocks Straight Bore Equivalent QVFL and QVVFL Square Flange Blocks Straight Bore Equivalent Part (1)(2) QVFL11V115S QVFL11V0S QVFL11V050S QVFL12V3S QVFL12V4S QVFL12V055S QVFL14V060S QVFL14V7S QVFL14V8S QVFL14V065S QVFLV211S QVFLV212S QVFLV070S QVFLV215S QVFLV300S QVFLV075S QVFL19V303S QVFL19V304S QVFL19V080S QVFL19V085S QVFL19V307S QVFL19V308S QVFL19V090S QVFL22V311S QVFL22V312S QVFL22V100S QVFL22V315S QVFL22V400S 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 11 3 3 4 100 3 15 4 22211 22212 22214 222 22219 22222 C D E B.C. F G (3) (4) (5) H J 75.9 2.99 80.3 3. 94.0 3.70 106.4 4.19 1.5 4.90 139.7 5.50 115.3 4.54 130.3 5.13 146.1 5.75 8.4 6.63 193.8 7.63 229.6 9.04 103.4 4.07 114.6 4.51 121.2 4.77 141.2 5.56 170.7 6.72 193.0 7.60 QV Single-Nut Unit (1) QVV Double-Nut Unit (1) 146.1 5.75 2.1 6.38 171.5 6.75 0.2 7.88 1.3 9.50 273.1 10.75 1 5.19 149.4 5.88 157.2 6.19 182.6 7.19 212.9 8.38 1.3 9.50 N/A N/A N/A N/A 187.33 7.375 215.90 8.500 23.1 0.91 19.1 0.75 26.9 1.06 12 1 2 L FIX 82.6 3.25 84.3 3.32 86.1 3.39 86.9 3.42 L EXP N Rv (1) Rvv Sv (1) Svv Wt. (1) part numbers use QV to designate single-nut units (uses Rv and Sv dimensions) and QVV to designate double-nut units (uses Rvv and Svv dimensions). (2) Single-nut (QV) part number shown. Double-nut (QVV) version available upon request. (3) Pilot tolerance: +0/-0.08 (+0/-0.003 ). (4) Add (p) to the end of the housing designation in the part number to order with pilot using G dimension. (5) Piloted flange blocks will be quoted (price and delivery) upon request. For optional spigot on flange side, insert the letter P as seen in the following example: QMFP**J***S. 32.5 1.28 38.1 1.50 1 97.3 3.83 1.8 4.60 84.6 3.33 86.4 3.40 88.1 3.47 88.9 3.50 99.3 3.91 118.9 4.68 61.2 2.41 66.8 2.63 72.6 2.86 74.4 2.93 86.4 3.40 104.6 4.12 2.5 0.10 4.6 0.18 5.1 0. 3.3 0.13 3.6 0.14 11.9 0.47 19.8 0.78 17.8 0.70 15.2 0.60 17.0 0.67 17.0 0.67 9.9 0.39 79.8 3.14 79.8 3.14 81.0 3.19 83.6 3.29 93.7 3.69 104.9 4.13 102.1 4.02 102.1 4.02 101.3 3.99 103.6 4.08 114.0 4.49 126.7 4.99 kg 5.0 11 6.4 14 7.7 17 10.4 23 15.9 35.9 55 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-91

V-Lock SERIES QVFX and QVVFX 5000 SERIES Square Flange Blocks Straight Bore Equivalent QVFX and QVVFX 5000 SERIES Square Flange Blocks Straight Bore Equivalent QV Single-Nut Unit (1) QVV Double-Nut Unit (1) Part (1)(2) QVFX11V115S QVFX11V0S QVFX11V050S QVFX12V3S QVFX12V4S QVFX12V055S QVFX14V060S QVFX14V7S QVFX14V8S QVFX14V065S QVFXV211S QVFXV212S QVFXV070S QVFXV215S QVFXV300S QVFXV075S QVFX19V303S QVFX19V304S QVFX19V080S QVFX19V085S QVFX19V307S QVFX19V308S QVFX19V090S QVFX22V311S QVFX22V312S QVFX22V100S QVFX22V315S QVFX22V400S QVFX26V110S (6) QVFX26V407S (6) QVFX26V408S (6) QVFX26V115S (6) QVFX28V125S (6) QVFX28V415S (6) QVFX28V500S (6) QVFX28V130S (6) 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 11 3 3 4 100 3 15 4 110 4 7 4 1 2 115 125 4 15 5 130 22211 22212 22214 222 22219 22222 22226 22228 C D E B.C. F G (3) (4) (5) H J 75.9 2.99 80.3 3. 94.0 3.70 106.4 4.19 1.5 4.90 139.7 5.50 174.8 6.88 189.7 7.47 1.7 4.75 130.3 5.13 146.1 5.75 8.9 6.65 193.8 7.63 215.9 8.50 256.5 10.10 284.2 11.19 103.6 4.08 114.3 4.50 127.8 5.03 152.7 6.01 170.7 6.72 211.1 8.31 146.1 5.75 1.5 6.36 180.8 7.12 215.9 8.50 1.3 9.50 298.5 11.75 134.9 5.31 149.4 5.88 157.2 6.19 189.0 7.44 212.6 8.37 268.2 10.56 3.6 327.2 384.3 6.44 (6) 12.88 (6) 15.13 177.8 355.6 419.1 7.00 (6) 14.00 (6).50 111.13 4.375 127.00 5.000 138.13 5.438 0.35 6.313 187.33 7.375 23 8.875 263.53 10.375 284.18 11.188 22.4 0.88 26.9 1.06 33.3 1.31 38.1 1.50 38.1 1.50 38.1 1.50 12 1 2 1 L FIX 84.1 3.31 84.3 3.32 85.1 3.35 87.6 3.45 98.3 3.87 114.0 4.49 140.5 1 (6) 5.53 6.1 1 1 8 (6) 6.54 L EXP N Rv (1) Rvv Sv (1) Svv Wt. (1) part numbers use QV to designate single-nut units (uses Rv and Sv dimensions) and QVV to designate double-nut units (uses Rvv and Svv dimensions). (2) Single-nut (QV) part number shown. Double-nut (QVV) version available upon request. (3) Pilot tolerance: +0/-0.05 (+0/-0.002 ). (4) Add (p) to the end of the housing designation in the part number to order with pilot using G dimension. (5) Piloted flange blocks will be quoted (price and delivery) upon request. For optional spigot on flange side, insert the letter P as seen in the following example: QMFP**J***S. (6) Six-bolt round housing. 86.1 3.39 86.4 3.40 87.4 3.44 89.7 3.53 100.6 3.96 1.3 4.58 142.7 5.62 8.1 6.62 65.0 2.56 66.8 2.63 72.4 2.85 76.2 3.00 84.1 3.31 100.6 3.96 106.9 4.21 138.4 5.45 4.1 0. 4.6 0.18 4.1 0. 4.1 0. 4.8 0.19 9.4 0.37 7.4 0.29 18.3 0.72 18.3 0.72 17.5 0.69.0 0.63.3 0.64 15.7 0.62 12.7 0.50 37.8 1.49 12.2 0.48 79.8 3.14 79.8 3.14 81.0 3.19 83.6 3.29 93.7 3.69 104.9 4.13 147.8 5.82 147.8 5.82 102.1 4.02 102.1 4.02 101.3 3.99 103.6 4.08 114.0 4.49 126.7 4.99 178.3 7.02 178.3 7.02 kg 5.0 11 6.4 14 7.7 17 10.4 23 15.9 35.9 55 49.0 108 52.2 115 C-92 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

V-Lock SERIES QVFK and QVVFK 9000 SERIES Square Flange Blocks Tapered Bore Equivalent QVFK and QVVFK 9000 SERIES Square Flange Blocks Tapered Bore Equivalent Part (1)(2) QVFK11V115S QVFK11V0S QVFK11V050S QVFK13V3S QVFK13V4S QVFK13V055S QVFK15V060S QVFK15V7S QVFK15V8S QVFK15V065S QVFK17V211S QVFK17V212S QVFK17V070S QVFK17V215S QVFK17V300S QVFK17V075S QVFKV303S QVFKV304S QVFKV080S QVFKV085S QVFKV307S QVFKV308S QVFKV090S QVFK22V311S (6) QVFK22V312S (6) QVFK22V100S (6) QVFK22V315S (6) QVFK22V400S (6) QVFK26V110S (6) QVFK26V407S (6) QVFK26V408S (6) QVFK26V115S (6) 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 11 3 3 4 100 3 15 4 110 4 7 4 1 2 115 22211 22213 22215 22217 222 22222 22226 C D E B.C. F G (3) (4) (5) H J 75.9 2.99 80.3 3. 94.0 3.70 106.4 4.19 1.5 4.90 139.7 5.50 174.8 6.88 130.3 5.13 146.1 5.75 8.9 6.65 193.8 7.63 215.9 8.50 256.5 10.10 284.2 11.19 114.3 4.50 127.8 5.03 152.7 6.01 170.7 6.72 211.1 8.31 1.5 6.36 180.8 7.12 215.9 8.50 1.3 9.50 298.5 11.75 149.4 5.88 157.2 6.19 189.0 7.44 212.9 8.38 268.2 10.56 8.7 327.2 384.3 6.64 (6) 12.88 (6) 15.13 177.8 355.6 419.1 7.00 (6) 14.00 (6).50 QV Single-Nut Unit (1) QVV Double-Nut Unit (1) 127.00 5.000 138.13 5.438 0.35 6.313 187.33 7.375 23 8.875 263.53 10.375 1.18 4.89 26.9 1.06 33.3 1.31 38.1 1.50 38.1 1.50 7 8 L FIX 87.1 3.43 92.2 3.63 92.5 3.64 92.5 3.64 113.3 4.46 117.3 1 (6) 4.62 28.6 4.6 1 1 8 (6) 6.48 L EXP N Rv (1) Rvv Sv (1) Svv Wt. (1) part numbers use QV to designate single-nut units (uses Rv and Sv dimensions) and QVV to designate double-nut units (uses Rvv and Svv dimensions). (2) Single-nut (QV) part number shown. Double-nut (QVV) version available upon request. (3) Pilot tolerance: +0/-0.05 (+0/-0.002 ). (4) Add (p) to the end of the housing designation in the part number to order with pilot using G dimension. (5) Piloted flange blocks will be quoted (price and delivery) upon request. For optional spigot on flange side, insert the letter P as seen in the following example: QMFP**J***S. (6) Six-bolt round housing. 88.4 3.48 94.2 3.71 94.5 3.72 101.1 3.98 115.3 4.54 119.4 4.70 6.6 6.56 66.8 2.63 72.4 2.85 76.2 3.00 84.1 3.31 103.1 4.06 106.9 4.21 135.1 5.32 7.4 0.29 6.9 0.27 9.9 0.39 14.5 0.57 18.0 0.71 12.4 0.49 11.7 0.46 15.0 0.59 15.5 0.61 11.4 0.45 7.1 0.28 4.1 0. 9.7 0.38 13.7 0.54 79.8 3.14 85.3 3.36 82.6 3.25 84.6 3.33 95.3 3.75 104.9 4.13 147.8 5.82 102.1 4.02 107.7 4. 103.9 4.09 106.2 4.18 117.3 4.62 126.7 4.99 178.3 7.02 kg 5.0 11 6.4 14 7.7 17 10.4 23 15.9 35.9 55 49.0 108 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-93

V-Lock SERIES QVFY and QVVFY Round Flange Blocks Straight Bore Equivalent QVFY and QVVFY Round Flange Blocks Straight Bore Equivalent QV Single-Nut Unit (1) QVV Double-Nut Unit (1) Part (1)(2) QVFY11V115S QVFY11V0S QVFY11V050S QVFY12V3S QVFY12V4S QVFY12V055S QVFY14V060S QVFY14V7S QVFY14V8S QVFY14V065S QVFYV211S QVFYV212S QVFYV070S QVFYV215S QVFYV300S QVFYV075S QVFY19V303S QVFY19V304S QVFY19V080S QVFY19V085S QVFY19V307S QVFY19V308S QVFY19V090S QVFY22V311S QVFY22V312S QVFY22V100S QVFY22V315S QVFY22V400S QVFY26V110S (6) QVFY26V407S (6) QVFY26V408S (6) QVFY26V115S (6) QVFY28V125S (6) QVFY28V415S (6) QVFY28V500S (6) QVFY28V130S (6) 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 11 3 3 4 100 3 15 4 110 4 7 4 1 2 115 125 4 15 5 130 22211 22212 22214 222 22219 22222 22226 22228 C D E B.C. F G (3) (4) (5) H J 75.9 2.99 80.3 3. 94.0 3.70 106.4 4.19 1.5 4.90 139.7 5.50 174.8 6.88 190.0 7.48 115.3 4.54 130.3 5.13 146.1 5.75 8.4 6.63 193.8 7.63 222.5 8.76 230.1 9.06 284.2 11.19 103.4 4.07 114.6 4.51 121.2 4.77 141.2 5.56 170.7 6.72 193.0 7.60 146.1 5.75 2.1 6.38 171.5 6.75 0.2 7.88 1.3 9.50 273.1 10.75 177.8 7.00 196.9 7.75 6.5 8.13 1.3 9.50 282.7 11.13 3.8 12.63 3.6 327.2 384.3 6.44 (6) 12.88 (6) 15.13 177.8 355.6 419.1 7.00 (6) 14.00 (6).50 111.13 4.375 127.00 5.000 138.13 5.438 0.35 6.313 187.33 7.375 N/A N/A N/A 19.1 0.75 19.1 0.75 23.9 0.94 23.9 0.94 28.7 1.13 28.7 1.13 38.1 1.50 38.1 1.50 12 1 2 7 8 1 L FIX 78.5 3.09 80.0 3.15 84.8 3.34 88.4 3.48 98.3 3.87 115.3 4.54 140.5 1 (6) 5.53 6.1 1 1 8 (6) 6.54 L EXP N Rv (1) Rvv Sv (1) Svv Wt. (1) part numbers use QV to designate single-nut units (uses Rv and Sv dimensions) and QVV to designate double-nut units (uses Rvv and Svv dimensions). (2) Single-nut (QV) part number shown. Double-nut (QVV) version available upon request. (3) Pilot tolerance: +0/-0.05 (+0/-0.002 ). (4) Add (p) to the end of the housing designation in the part number to order with pilot using G dimension. (5) Piloted flange blocks will be quoted (price and delivery) upon request. For optional spigot on flange side, insert the letter P as seen in the following example: QMFP**J***S. (6) Six-bolt round housing. 80.5 3.17 82.0 3.23 86.9 3.42 90.4 3.56 1.1 4.57 117.3 4.62 142.7 5.62 8.1 6.62 58.4 2.30 62.0 2.44 72.4 2.85 76.2 3.00 85.3 3.36 103.1 4.06 106.9 4.21 138.4 5.45 1.5 0.06 0.3 0.01 3.8 0.15 4.8 0.19 4.8 0.19 10.4 0.41 7.4 0.29 18.3 0.72 23.9 0.94 22.1 0.87.5 0.65 15.2 0.60 15.7 0.62 11.4 0.45 37.8 1.49 12.2 0.48 79.8 3.14 79.8 3.14 81.0 3.19 83.6 3.29 93.7 3.69 104.9 4.13 147.8 5.82 147.8 5.82 102.1 4.02 102.1 4.02 101.3 3.99 103.6 4.08 114.0 4.49 126.7 4.99 178.3 7.02 178.3 7.02 kg 5.4 12 6.8 15 8.6 19 12.7 28 19.1 42 29.9 66 49.0 108 52.2 115 C-94 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

V-Lock SERIES QVC and QVVC Piloted Flange Cartridges Straight Bore Equivalent QVC and QVVC Piloted Flange Cartridges Straight Bore Equivalent QV Single-Nut Unit (1) QVV Double-Nut Unit (1) Part (1)(2) QVC11V115S QVC11V0S QVC11V050S QVC12V3S QVC12V4S QVC12V055S QVC14V060S QVC14V7S QVC14V8S QVC14V065S QVCV211S QVCV212S QVCV070S QVCV215S QVCV300S QVCV075S QVC19V303S QVC19V304S QVC19V080S QVC19V085S QVC19V307S QVC19V308S QVC19V090S QVC22V311S QVC22V312S QVC22V100S QVC22V315S QVC22V400S QVC26V110S (4) QVC26V407S (4) QVC26V408S (4) QVC26V115S (4) 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 11 3 3 4 100 3 15 4 110 4 7 4 1 2 115 22211 22212 22214 222 22219 22222 22226 B FIX 53.8 2.12 51.3 2.02 56.1 2.21 52.8 2.08 62.5 2.46 60.2 2.37 86.4 3.40 B EXP C D B.C. E F G (3) H J L N Rv (1) Rvv Sv (1) Svv Wt. 55.9 2. 53.3 2.10 58.2 2.29 54.9 2. 64.5 2.54 62.2 2.45 88.4 3.48 75.9 2.99 80.3 3. 94.0 3.70 106.4 4.19 1.5 4.90 139.7 5.50 174.8 6.88 113.5 4.47 127.0 5.00 139.7 5.50 2.1 6.38 185.2 7.29 222.5 8.76 260.4 10.25 136.7 5.38 152.4 6.00 5.1 6.50 190.5 7.50 219.2 8.63 238.3 9.38 96.5 3.80 107.7 4. 1.8 4.60 134.6 5.30 154.9 6.10 8.4 6.63 2.1 6.38 185.4 7.30 193.8 7.63 222.3 8.75 262.6 10.34 276.4 10.88 298.5 149.4 342.9 11.75 (4) 5.88 (4) 13.50 114.3 4.500 127.0 5.000 139.7 5.500 1.9 6.375 187.3 7.375 6.4 8.125 260.4 10.250.0 0.63 14.7 0.58 17.5 0.69.6 0.81 10 7 12 1 2 12 1 2 80.8 3.18 80.0 3.15 84.6 3.33 84.6 3.33 95.8 3.77 115.3 4.54 134.6 (4) 5.30 (1) part numbers use QV to designate single-nut units (uses Rv and Sv dimensions) and QVV to designate double-nut units (uses Rvv and Svv dimensions). (2) Single-nut (QV) part number shown. Double-nut (QVV) version available upon request. (3) Pilot tolerance: +0/-0.05 (+0/-0.002 ). (4) Six-bolt round housing. 26.9 1.06 28.7 1.13 28.7 1.13 33.3 1.31 54.1 2.13 48.3 1.90 0.8 0.03 0.3 0.01 3.8 0.15 1.0 0.04 2.0 0.08 10.4 0.41 13.2 0.52 21.6 0.85 22.1 0.87.5 0.65 19.3 0.76 18.5 0.73 11.7 0.46 43.7 1.72 79.8 3.14 79.8 3.14 81.0 3.19 83.6 3.29 93.7 3.69 104.9 4.13 147.8 5.82 102.1 4.02 102.1 4.02 101.3 3.99 103.6 4.08 114.0 4.49 126.7 4.99 178.3 7.02 kg 4.5 10 5.9 13 7.3 10.0 22 14.5 32 19.5 43 32.7 72 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-95

V-Lock SERIES QVCW and QVVCW Piloted Flange Cartridges Straight Bore Equivalent QVCW and QVVCW Piloted Flange Cartridges Straight Bore Equivalent Part (1)(2) QVCW11V115S QVCW11V0S QVCW11V050S QVCW12V3S QVCW12V4S QVCW12V055S QVCW14V060S QVCW14V7S QVCW14V8S QVCW14V065S QVCWV211S QVCWV212S QVCWV070S QVCWV215S QVCWV300S QVCWV075S QVCW19V303S QVCW19V304S QVCW19V080S QVCW19V085S QVCW19V307S QVCW19V308S QVCW19V090S QVCW22V311S QVCW22V312S QVCW22V100S QVCW22V315S QVCW22V400S QVCW26V110S (4) QVCW26V407S (4) QVCW26V408S (4) QVCW26V115S (4) QVCW28V125S (4) QVCW28V415S (4) QVCW28V500S (4) QVCW28V130S (4) 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 11 3 3 4 100 3 15 4 110 4 7 4 1 2 115 125 4 15 5 130 22211 22212 22214 222 22219 22222 22226 22228 B FIX 42.2 1.66 43.2 1.70 41.9 1.65 37.6 1.48 49.8 1.96 51.6 2.03 72.4 2.85 66.5 2.62 B EXP C D B.C. E F G (3) H J L N Rv (1) Rvv Sv (1) Svv Wt. 44.2 1.74 45.5 1.79 43.9 1.73 39.6 1.56 51.8 2.04 53.6 2.11 74.4 2.93 68.6 2.70 75.9 2.99 80.3 3. 94.0 3.70 106.4 4.19 1.5 4.90 139.7 5.50 174.8 6.88 190.0 7.48 113.5 4.47 127.0 5.00 139.7 5.50 2.1 6.38 187.5 7.38 222.5 8.76 260.4 10.25 266.7 10.50 136.7 5.38 152.4 6.00 5.1 6.50 190.5 7.50 219.2 8.63 238.3 9.38 QV Single-Nut Unit (1) QVV Double-Nut Unit (1) 96.5 3.80 107.7 4. 1.8 4.60 134.6 5.30 154.9 6.10 8.4 6.63 2.1 6.38 181.1 7.13 193.8 7.63 222.3 8.75 260.4 10.25 276.4 10.88 298.5 149.4 342.9 11.75 (4) 5.88 (4) 13.50 323.9 2.1 374.7 12.75 (4) 6.38 (4) 14.75 114.3 4.500 127.0 5.000 139.7 5.500 1.9 6.375 187.3 7.375 6.4 8.125 260.4 10.250 279.4 10 9.7 0.38 14.2 0.56 12.7 0.50 12.7 0.50 22.4 0.88 10 7 12 1 2 12 1 2 (4) 26.2 1.03 (4) 7 8 (1) part numbers use QV to designate single-nut units (uses Rv and Sv dimensions) and QVV to designate double-nut units (uses Rvv and Svv dimensions). (2) Single-nut (QV) part number shown. Double-nut (QVV) version available upon request. (3) Pilot tolerance: +0/-0.05 (+0/-0.002 ). (4) Six-bolt round housing. 80.3 3. 84.6 3.33 86.4 3.40 85.1 3.35 97.5 3.84 109.7 4.32 140.5 5.53 144.5 5.69 38.1 1.50 41.4 1.63 42.9 1.69 47.8 1.88 47.8 1.88 57.2 2.25 68.3 2.69 78.0 3.07 0.8 0.03 4.8 0.19 5.3 0.21 1.8 0.07 3.8 0.15 4.8 0.19 7.4 0.29 3.3 0.13 21.8 0.86 17.5 0.69 15.0 0.59 18.5 0.73.8 0.66 17.3 0.68 37.8 1.49 33.8 1.33 79.8 3.14 79.8 3.14 81.0 3.19 83.6 3.29 93.7 3.69 104.9 4.13 147.8 5.82 147.8 5.82 102.1 4.02 102.1 4.02 101.3 3.99 103.6 4.08 114.0 4.49 126.7 4.99 178.3 7.02 178.3 7.02 kg 4.5 10 5.9 13 7.3 10.0 22 14.5 32 19.5 43 32.7 72 46.3 102 C-96 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

V-Lock SERIES QVMC and QVVMC Cartridge Blocks Tapered Bore Equivalent QVMC and QVVMC Cartridge Blocks Tapered Bore Equivalent QV Single-Nut Unit (1) QVV Double-Nut Unit (1) Part (1)(2) QVMC11V115S QVMC11V0S QVMC11V050S QVMC13V3S QVMC13V4S QVMC13V055S QVMC15V060S QVMC15V7S QVMC15V8S QVMC15V065S QVMC17V211S QVMC17V212S QVMC17V070S QVMC17V215S QVMC17V300S QVMC17V075S QVMCV303S QVMCV304S QVMCV080S QVMCV085S QVMCV307S QVMCV308S QVMCV090S QVMC22V311S QVMC22V312S QVMC22V100S QVMC22V315S QVMC22V400S QVMC26V110S QVMC26V407S QVMC26V408S QVMC26V115S 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 11 3 3 4 100 3 15 4 110 4 7 4 1 2 115 22211 22213 22215 22217 222 22222 22226 A B C D F G 13.5 0.530 13.5 0.530 15.1 0.594 15.1 0.594 19.8 0.781 19.8 0.781 19.8 0.780 23.0 0.906 23.0 0.906 26.2 1.032 27.5 1.083 32.5 1.281 32.5 1.281 38.1 1.500 75.9 2.99 80.3 3. 94.0 3.70 106.4 4.19 1.5 4.90 139.7 5.50 174.8 6.88 4.8 0.188 4.8 0.188 6.4 0.250 7.1 0.281 8.0 0.313 8.0 0.313 8.0 0.313 115.09 (+0/-0.05) 4.531 (+0/-0.002) 127.00 (+0/-0.05) 5.000 (+0/-0.002) 149.23 (+0/-0.05) 5.875 (+0/-0.002) 171.45 (+0/-0.05) 6.75 (+0/-0.002) 6.38 (+0/-0.05) 8.125 (+0/-0.002) 222.25 (+0/-0.08) 8.75 (+0/-0.003) 265.10 (+0/-0.08) 10.437 (+0/-0.003) 55.4 2.180 67.1 2.640 70.6 2.780 74.9 2.950 85.6 3.370 L FIX 79.0 3.11 85.9 3.38 87.4 3.44 91.2 3.59 102.1 4.02 L EXP Rv (1) Rvv Sv (1) Svv Wt. (1) part numbers use QV to designate single-nut units (uses Rv and Sv dimensions) and QVV to designate double-nut units (uses Rvv and Svv dimensions). (2) Single-nut (QV) part number shown. Double-nut (QVV) version available upon request. 97.8 3.850 104.4 4.110 113.0 4.45 141.5 5.57 81.0 3.19 87.9 3.46 89.4 3.52 93.2 3.67 104.1 4.10 115.1 4.53 143.5 5.65 0.8 0.03 0.5 0.02 5.1 0. 6.4 0.25 6.9 0.27 8.1 0.32 6.4 0.25 23.1 0.91 21.8 0.86.5 0.65 15.0 0.59 15.2 0.60 14.0 0.55 36.8 1.45 79.8 3.14 85.3 3.36 82.6 3.25 84.6 3.33 95.3 3.75 104.9 4.13 147.8 5.82 102.1 4.02 107.7 4. 103.9 4.09 106.2 4.18 117.3 4.62 126.7 4.99 178.3 7.02 kg 4.5 10 5.4 12 8.2 18 11.8 26 14.5 32 18.1 40 23.6 52 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-97

V-Lock SERIES QVVTU Take-Up Blocks Straight Bore Equivalent QVVTU Take-Up Blocks Straight Bore Equivalent QV Single-Nut Unit QVV Double-Nut Unit Part (1) QVVTU14V060S 60 QVVTU14V7S 2 7 69.9 22.4 149.4 130.3 33.3 22214 QVVTU14V8S 2 1 2 2.75 0.88 5.88 5.13 1.31 QVVTU14V065S 65 QVVTUV211S 2 11 QVVTUV212S 2 3 4 QVVTUV070S 70 76.2 171.5 150.9 39.6 222 QVVTUV215S 2 15 3.00 6.75 5.94 1.56 QVVTUV300S 3 QVVTUV075S 75 QVVTU19V303S 3 3 QVVTU19V304S 3 1 4 QVVTU19V080S 80 92.2 193.8 173.0 46.0 QVVTU19V085S 85 22219 3.63 7.63 6.81 1.81 QVVTU19V307S 3 7 QVVTU19V308S 3 1 2 QVVTU19V090S 90 QVVTU22V311S 3 11 QVVTU22V312S 3 3 4 104.9 28.7 239.8 219.2 54.1 QVVTU22V100S 100 22222 4.13 1.13 9.44 8.63 2.13 QVVTU22V315S 3 15 QVVTU22V400S 4 (1) Double-nut (QVV) part number shown. Single-nut (QV) version available upon request. A C D E F G J L N P S Rv (1) Rvv Tv (1) Tvv Wt. 33.3 1.31 39.6 1.56 47.8 1.88 52.3 2.06 95.3 3.75 108.0 4.25 1.0 4.88 143.0 5.63 193.8 7.63 219.7 8.65 257.0 10.12 296.9 11.69 88.4 3.48 90.2 3.55 99.6 3.92 111.3 4.38 1.7 4.75 1.7 4.75 158.8 6.25 177.8 7.00 26.9 1.06 46.0 1.81 46.0 1.81 52.3 2.06 3.3 0.13 2.3 0.09 0.5 0.02 1.5 0.06 15.5 0.61.3 0.64 18.0 0.71 18.8 0.74 85.1 3.35 87.6 3.45 99.1 3.90 110.0 4.33 103.9 4.09 106.2 4.18 117.6 4.63 130.3 5.13 kg 7.7 17 15.9 35.0 44 26.3 58 C-98 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

CL Series CL Series Available in both single-collar (QA) and double-collar (QAA) versions, the CL bearing series features a concentric locking collar with two set screws at 60 degrees to provide maximum positive locking power with minimal run out. You Have Choices For the CL series, you can select either single-collar or doublecollar versions and choose from many seal configurations and housing styles, which are shown on page C-100. Housings Two-bolt pillow blocks. Four-bolt pillow blocks. Flange blocks. Piloted flange cartridges. Take-up blocks. Cartridge blocks. Hanger blocks. Fig. C-43. CL series single-collar (QA) insert available up to 100 (4 ). Seals Labyrinth: DuPont Teflon (T). Triple-lip: nitrile rubber (M), urethane (O) and DuPont Viton (N). Double-lip: nitrile rubber (B) and DuPont Viton (C). Steel and urethane closed-end covers (CS). Steel and urethane open-end covers (CJ) with: DuPont Teflon (T). Triple-lip seal (DR). V-ring seal (VR). Piloted flange cartridge backing plates (HSY) with: Triple-lip seal (DR). Flange block backing plates (UFP). V-ring (VR). Fig. C-44. CL series double-collar (QAA) insert for size ranges 50 130 (1 15 5 ). TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-99

CL Series CL Series Housing Type Primary Seals M N O B C T Open-End Cover Secondary Seals and Covers HSY Flange Cartridge Backing Plate Closed-End DR VR T Cover DR Pillow Block UFP Backing Plate V-Lock (Timken Exclusive Double Taper Lock) Flange Block Piloted Flange Cartridge Take-Up Block Cartridge Block Pillow Block Flange Block CL Series (Set Screw Lock) Piloted Flange Cartridge Take-Up Block Cartridge Block Hangar Block Pillow Block Flange Block EC Series (Eccentric Lock) Piloted Flange Cartridge Take-Up Block Cartridge Block Hangar Block Pillow Block TA Series (Tapered Adapter Lock) Flange Block Piloted Flange Cartridge Cartridge Block Pillow Block DV Series (Tapered Adapter Lock) Flange Block Piloted Flange Cartridge C-100 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

CL Series QAP and QAAP Two-Bolt Pillow Blocks QAP and QAAP Two-Bolt Pillow Blocks QA Single-Collar Unit QAA Double-Collar Unit Part (1) QAP08A035S QAP08A107S 35 1 7 228 QAP08A108S 1 1 2 228 QAP09A111S 1 11 229 A B C D m D max. F G H J K A L M R A R AA S A S AA Wt. 47.8 1.88 54.1 2.13 54.1 2.13 94.7 3.73 101.1 3.98 104.9 4.13 60.5 2.38 60.5 2.38 66.8 2.63 119.1 4.69 119.1 4.69 144.8 5.70 152.4 6.00 5.1 6.50 5.1 6.50 174.8 6.88 0.2 7.88 0.2 7.88 57.2 2.25 57.2 2.25 60.2 2.37 12 1 2 12 1 2 12 1 2 73.2 2.88 73.2 2.88 78.0 3.07 44.5 1.75 44.5 1.75 47.8 1.88 3.3 0.13 3.3 0.13 4.8 0.19 69.9 2.75 69.9 2.75 73.2 2.88 kg 4.1 9 4.1 9 4.5 10 QAP09A040S 40 QAP09A112S 1 3 4 229 57.2 2.25 108.0 4.25 66.8 2.63 158.8 6.25 180.8 7.12 225.6 8.88 62.0 2.44 78.7 3.10 47.8 1.88 5.6 0.22 73.2 2.88 4.5 10 QAP09A045S 45 QAP10A115S QAAP10A115S QAP10A0S QAAP10A0S QAP10A050S QAAP10A050S QAP11A3S QAAP11A3S QAP11A4S QAAP11A4S QAP11A055S QAAP11A055S QAP13A060S QAAP13A060S QAP13A7S QAAP13A7S QAP13A8S QAAP13A8S QAP13A065S QAAP13A065S 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 22210 22211 22213 57.2 2.25 63.5 2.50 69.9 2.75 122.2 4.81 133.4 5.25 147.3 5.80 73.2 2.88 82.6 3.25 96.8 3.81 152.4 6.00 5.1 6.50 174.8 6.88 181.1 7.13 0.2 7.88 219.2 8.63 225.6 8.88 4.6 9.63 260.4 10.25 (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). 62.0 2.44 66.8 2.63 73.7 2.90 35.1 1.38 28.7 1.13 31.5 1. 79.0 3.11 84.3 3.32 91.4 3.60 47.5 1.87 50.8 2.00 54.6 2.15 6.1 0. 4.8 0.19 5.3 0.21 17.0 0.67 17.5 0.69 17.8 0.70 72.9 2.87 79.5 3.13 86.1 3.39 95.3 3.75 101.6 4.00 109.2 4.30 5.9 13 7.7 17 10.0 22 Continued on next page. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-101

CL Series QAP and QAAP Two-Bolt Pillow Blocks QA Single-Collar Unit QAA Double-Collar Unit Continued from previous page. Part (1) QAP15A211S QAAP15A211S QAP15A212S QAAP15A212S QAP15A070S QAAP15A070S QAP15A215S QAAP15A215S QAP15A300S QAAP15A300S QAP15A075S QAAP15A075S QAP18A303S QAAP18A303S QAP18A304S QAAP18A304S QAP18A080S QAAP18A080S QAP18A085S QAAP18 A085S QAP18A307S QAAP18A307S QAP18A308S QAAP18A308S QAP18A090S QAAP18A090S QAPA315S QAAPA315S QAPA400S QAAPA400S QAPA100S QAAPA100S 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 15 4 100 22215 22218 222 A B C D m D max. F G H J K A L M R A R AA S A S AA Wt. 79.5 3.13 95.3 3.75 104.9 4.13 4.3 6.47 195.3 7.69 9.8 8.26 109.0 4.29 130.3 5.13 152.4 6.00 0.2 7.88 238.3 9.38 255.0 10.04 4.6 9.63 285.8 1 3.0 12.60 (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). 295.4 11.63 342.9 13.50 362.0 14.25 76.2 3.00 86.6 3.41 94.7 3.73 35.1 1.38 47.8 1.88 50.8 2.00 7 8 1 36.6 1.44 41.4 1.63 98.3 3.87 109.2 4.30 122.9 4.84 60.2 2.37 65.8 2.59 75.4 2.97 6.4 0.25 6.9 0.27 6.1 0. 22.1 0.87 22.6 0.89 28.2 1.11 91.9 3.62 102.4 4.03 1.8 4.60 1.4 4.74 131.6 5.18 150.9 5.94 kg 12.7 28.4 45 26.8 59 C-102 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

CL Series QAPL and QAAPL Two-Bolt Pillow Blocks QAPL and QAAPL Two-Bolt Pillow Blocks QA Single-Collar Unit QAA Double-Collar Unit Part (1) A B C D m D max. F G H J K A L M R A R AA S A S AA Wt. kg QAPL08A035S 35 QAPL08A107S 1 7 228 47.8 1.88 94.7 3.73 60.5 2.38 119.1 4.69 152.4 6.00 174.8 6.88 57.2 2.25 12 1 2 73.2 2.88 44.5 1.75 3.3 0.13 69.9 2.75 4.1 9 QAPL08A108S 1 1 2 QAPL09A040S 40 QAPL09A111S QAPL09A112S 1 11 1 3 4 229 54.1 2.13 104.9 4.13 66.8 2.63 133.4 5.25 146.1 5.75 181.1 7.13 60.2 2.37 12 1 2 78.0 3.07 47.8 1.88 4.8 0.19 73.2 2.88 4.5 10 QAPL09A045S 45 QAPL10A115S QAAPL10A115S 1 15 QAPL10A0S QAAPL10A0S QAPL10A050S QAAPL10A050S QAPL11A3S QAAPL11A3S QAPL11A4S QAAPL11A4S QAPL11A055S QAAPL11A055S QAPL13A060S QAAPL13A060S QAPL13A7S QAAPL13A7S QAPL13A8S QAAPL13A8S QAPL13A065S QAAPL13A065S 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 22210 22211 22213 57.2 2.25 63.5 2.50 69.9 2.75 122.2 4.81 133.4 5.25 147.3 5.80 (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). 73.2 2.88 82.6 3.25 96.8 3.81 150.6 5.93 5.1 6.50 173.0 6.81 1.5 6.36 179.3 7.06 189.0 7.44 212.9 8.38 225.6 8.88 235.0 9.25 62.0 2.44 65.5 2.58 73.7 2.90 35.1 1.38 28.7 1.13 31.5 1. 79.0 3.11 83.6 3.29 91.4 3.60 47.5 1.87 50.8 2.00 54.6 2.15 6.1 0. 4.1 0. 5.3 0.21 17.0 0.67 18.0 0.71 17.8 0.70 72.9 2.87 79.5 3.13 86.1 3.39 95.3 3.75 101.6 4.00 109.2 4.30 5.9 13 7.7 17 10.0 22 Continued on next page. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-103

CL Series QAPL and QAAPL Two-Bolt Pillow Blocks QA Single-Collar Unit QAA Double-Collar Unit Continued from previous page. Part (1) QAPL15A211S QAAPL15A211S QAPL15A212S QAAPL15A212S QAPL15A070S QAAPL15A070S QAPL15A215S QAAPL15A215S QAPL15A300S QAAPL15A300S QAPL15A075S QAAPL15A075S QAPL18A303S QAAPL18A303S QAPL18A304S QAAPL18A304S QAPL18A080S QAAPL18A080S QAPL18A085S QAAPL18A085S QAPL18A307S QAAPL18A307S QAPL18A308S QAAPL18A308S QAPL18A090S QAAPL18A090S QAPLA315S QAAPLA315S QAPLA400S QAAPLA400S QAPLA100S QAAPLA100S 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 15 4 100 22215 22218 222 A B C D m D max. F G H J K A L M R A R AA S A S AA Wt. 82.6 3.25 95.3 3.75 108.0 4.25 7.4 6.59 195.3 7.69 212.9 8.38 109.0 4.29 130.3 5.13 152.4 6.00 195.6 7.70 235.0 9.25 255.0 10.04 213.4 8.40 273.1 10.75 3.0 12.60 (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). 265.2 10.44 330.2 13.00 362.0 14.25 76.2 3.00 86.6 3.41 94.7 3.73 35.1 1.38 47.8 1.88 54.1 2.13 7 8 1 36.6 1.44 41.4 1.63 98.3 3.87 109.2 4.30 122.9 4.84 60.2 2.37 65.8 2.59 75.4 2.97 6.4 0.25 6.9 0.27 6.1 0. 22.1 0.87 22.6 0.89 28.2 1.11 91.9 3.62 102.4 4.03 1.8 4.60 1.4 4.74 131.6 5.18 150.9 5.94 kg 12.7 28.4 45 26.8 59 C-104 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

CL Series QASN and QAASN SN-Style Two-Bolt Pillow Blocks Pure Metric Design QASN and QAASN SN-Style Two-Bolt Pillow Blocks Pure Metric Design QA Single-Collar Unit QAA Double-Collar Unit Part (1) QASN08A035S 35 QASN08A107S 1 7 QASN08A108S 1 1 2 QASN09A040S 40 QASN09A111S 1 11 QASN09A112S 1 3 4 QASN09A045S 45 QASN10A115S QAASN10A115S 1 15 QASN10A0S QAASN10A0S 2 QASN10A050S QAASN10A050S 50 QASN11A3S QAASN11A3S 2 3 QASN11A4S QAASN11A4S 2 1 4 QASN11A055S QAASN11A055S 55 QASN13A060S QAASN13A060S 60 QASN13A7S QAASN13A7S 2 7 QASN13A8S QAASN13A8S 2 1 2 QASN13A065S QAASN13A065S 65 QASN15A211S QAASN15A211S 2 11 QASN15A212S QAASN15A212S 2 3 4 QASN15A070S QAASN15A070S 70 QASN15A215S QAASN15A215S 2 15 QASN15A300S QAASN15A300S 3 QASN15A075S QAASN15A075S 75 228 229 22210 22211 22213 22215 A B C D m D max. F G H J K A L M R A R AA S A S AA Wt. 60 2.36 60 2.36 70 2.76 70 2.76 80 3.15 95 3.74 111 4.37 111 4.37 136 5.35 141 5.55 157 6.18 183 7. 60.5 2.38 66.8 2.63 73 2.87 83 3.27 96.8 3.81 109.0 4.29 159 6.26 159 6.26 183 7. 183 7. 196 7.72 1 9.49 175 6.89 175 6.89 2 8.50 2 8.50 235 9.25 279 10.98 5 8.07 5 8.07 254 10.00 254 10.00 275 10.83 3 12.44 (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). 62 2.44 62 2.44 68 2.68 68 2.68 74 2.91 76 2.99 35 1.38 35 1.38 25 0.98 25 0.98 35 1.38 34 1.34 12 1 2 12 1 2 25 25 1 29 1.14 31 1.22 32 1.26 75 2.95 79 3.10 82 3.23 85 3.35 92 3.62 98 3.86 44 1.75 48 1.88 48 1.87 51 2.01 55 2.17 60 2.36 5 0. 6 0.22 9 0.35 5 0. 6 0. 6 0. 14 0.55 17 0.67 18 0.71 22 0.87 70 2.75 73 2.88 73 2.87 80 3.15 86 3.39 92 3.62 95 3.75 102 4.02 110 4.33 1 4.72 kg 10.5 23 10.5 23 12.7 28 13.2 29 15.9 35.9 46 Continued on next page. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-105

CL Series QASN and QAASN SN-Style Two-Bolt Pillow Blocks Pure Metric Design Continued from previous page. QA Single-Collar Unit QAA Double-Collar Unit Part (1) QASN18A303S QAASN18A303S 3 3 QASN18A304S QAASN18A304S 3 1 4 22218 QASN18A080S QAASN18A080S 80 QASN18A085S QAASN18A085S 85 22218 QASN18A307S QAASN18A307S 3 7 QASN18A308S QAASN18A308S 3 1 2 22218 QASN18A090S QAASN18A090S 90 QASNA315S QAASNA315S 3 15 QASNA400S QAASNA400S 4 222 QASNA100S QAASNA100S 100 QAASN22A110S 110 22222 QAASN22A407S QAASN22A408S QAASN22A115S QAASN26A125S QAASN26A415S QAASN26A500S QAASN26A130S 4 7 4 1 2 115 125 4 15 5 130 22222 22226 A B C D m D max. F G H J K A L M R A R AA S A S AA Wt. 100 3.94 112 4.41 112 4.41 125 4.92 140 5.51 150 5.91 150 5.91 0 7.87 212 8.35 212 8.35 1 9.49 255 10.04 265 10.43 282 11.1 130 5.12 130 5.12 130 5.12 152 5.98 0 6.30 0 6.30 175 6.89 279 10.98 279 10.98 290 11.42 319 12.56 332 13.07 367 14.45 402 15.83 292 11.50 292 11.50 327 12.87 366 14.41 365 14.37 400 15.75 435 17.13 (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). 345 13.58 345 13.58 380 14.96 410.14 410.14 445 17.52 500 19.69 86 3.39 86 3.39 86 3.39 101 3.98 105 4.13 105 4.13 113 4.45 39 1.54 39 1.54 39 1.54 50 1.97 39 1.54 49 1.93 49 1.93 7 8 7 8 7 8 7 8 30 1 1 4 37 1.46 37 1.46 37 1.46 41 1.61 109 4.29 109 4.29 109 4.29 126 4.96 133 5. 133 5. 151 5.94 66 2.60 66 2.60 66 2.60 75 2.95 80 3.15 80 3.15 94 3.7 6 0. 6 0. 6 0. 10 0.39 23 0.91 23 0.91 23 0.91 25 0.98 28 1.10 28 1.10 38 1.5 102 4.02 102 4.02 102 4.02 117 4.61 132 5. 132 5. 132 5. 150 5.91 0 6.30 0 6.30 188 7.4 kg 25.5 56 25.5 56 25.5 56 35.9 79 35.9 79 40.0 88 40.0 88 C-106 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

CL Series QAAPXT 5000 Series Two-Bolt Pillow Blocks QAAPXT 5000 Series Two-Bolt Pillow Blocks Part A B C D m D max. F G H J L M R S Wt. kg QAAPXT13A060S 60 QAAPXT13A7S QAAPXT13A8S 2 7 2 1 2 22213 76.2 3.00 153.7 6.05 96.8 3.81 194.6 7.66 223.0 8.78 285.8 1 73.7 2.90 35.1 1.38 91.4 3.60 54.6 2.15 17.8 0.70 109.2 4.30 10.0 22 QAAPXT13A065S 65 QAAPXT15A211S 2 11 QAAPXT15A212S 2 3 4 QAAPXT15A070S QAAPXT15A215S 70 2 15 22215 88.9 3.50 173.7 6.84 109.0 4.29 230.1 9.06 265.2 10.44 330.2 13.00 75.7 2.98 35.1 1.38 7 8 98.0 3.86 60.2 2.37 22.4 0.88 1.4 4.74 12.7 28 QAAPXT15A300S 3 QAAPXT15A075S 75 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-107

CL Series QAPF and QAAPF Four-Bolt Pillow Blocks QAPF and QAAPF Four-Bolt Pillow Blocks QA Single-Collar Unit QAA Double-Collar Unit Part (1) QAPF13A060S QAAPF13A060S QAPF13A7S QAAPF13A7S QAPF13A8S QAAPF13A8S QAPF13A065S QAAPF13A065S QAPF15A211S QAAPF15A211S QAPF15A212S QAAPF15A212S QAPF15A070S QAAPF15A070S QAPF15A215S QAAPF15A215S QAPF15A300S QAAPF15A300S QAPF15A075S QAAPF15A075S 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 22213 22215 A B C D m D max. E F G H J K A L M R A R AA S A S AA Wt. 69.9 2.75 82.6 3.25 147.3 5.80 7.6 6.60 96.8 3.81 109.0 4.29 174.8 6.88 193.0 7.60 193.8 7.63 231.1 9.10 44.5 1.75 47.8 1.88 235.0 9.25 265.2 10.44 (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). 76.2 3.00 79.5 3.13.9 0.98 32.8 1.29 31.5 1. 92.7 3.65 100.1 3.94 54.6 2.15 60.2 2.37 5.3 0.21 6.1 0. 17.8 0.70 22.4 0.88 86.1 3.39 91.9 3.62 109.2 4.30 1.4 4.74 kg 9.1 12.2 27 Continued on next page. C-108 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

CL Series QAPF and QAAPF Four-Bolt Pillow Blocks QA Single-Collar Unit QAA Double-Collar Unit Continued from previous page. Part (1) QAPF18A303S QAAPF18A303S QAPF18A304S QAAPF18A304S QAPF18A080S QAAPF18A080S QAPF18A085S QAAPF18A085S QAPF18A307S QAAPF18A307S QAPF18A308S QAAPF18A308S QAPF18A090S QAAPF18A090S QAPFA315S QAAPFA315S QAPFA400S QAAPFA400S QAPFA100S QAAPFA100S QAAPF22A110S QAAPF22A407S QAAPF22A408S QAAPF22A115S QAAPF26A125S QAAPF26A415S QAAPF26A500S QAAPF26A130S 3 3 3 1 4 80 85 3 7 3 1 2 90 3 15 4 100 110 4 7 4 1 2 115 125 4 15 5 130 22218 222 22222 22226 A B C D m D max. E F G H J K A L M R A R AA S A S AA Wt. 95.3 3.75 108.0 4.25 1.7 4.75 139.7 5.50 195.3 7.69 223.0 8.78 233.4 9.19 279.7 11.01 130.3 5.13 152.4 6.00 0.0 6.30 175.0 6.89 225.6 8.88 276.4 10.88 301.8 11.88 349.3 13.75 276.4 10.88 339.9 13.38 368.3 14.50 403.4 15.88 (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). 50.8 2.00 57.2 2.25 63.5 2.50 69.9 2.75 312.4 12.30 378.0 14.88 409.7.13 444.5 17.50 95.3 3.75 109.5 4.31 1.7 4.75 128.0 5.04 39.6 1.56 35.6 1.40 40.1 1.58 39.1 1.54 7 8 36.6 1.44 41.4 1.63 113.5 4.47 130.3 5.13 140.0 5.51 158.5 6. 65.8 2.59 75.4 2.97 79.5 3.13 94.5 3.72 7.9 0.31 8.9 0.35 21.3 0.84 25.1 0.99 28.7 1.13 36.8 1.45 102.4 4.03 1.6 4.59 131.6 5.18 150.9 5.94 158.8 6.25 189.0 7.44 kg 22.2 49 30.4 67 37.2 82 60.8 134 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-109

CL Series QAPR and QAAPR Four-Bolt Pillow Blocks QAPR and QAAPR Four-Bolt Pillow Blocks QA Single-Collar Unit QAA Double-Collar Unit Part (1) QAPR13A060S QAAPR13A060S QAPR13A7S QAAPR13A7S QAPR13A8S QAAPR13A8S QAPR13A065S QAAPR13A065S QAPR15A211S QAAPR15A211S QAPR15A212S QAAPR15A212S QAPR15A070S QAAPR15A070S QAPR15A215S QAAPR15A215S QAPR15A300S QAAPR15A300S QAPR15A075S QAAPR15A075S QAPR18A303S QAAPR18A303S QAPR18A304S QAAPR18A304S QAPR18A080S QAAPR18A080S QAPR18A085S QAAPR18A085S QAPR18A307S QAAPR18A307S QAPR18A308S QAAPR18A308S QAPR18A090S QAAPR18A090S 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 22213 22215 22218 A B C D m D max. E F G H J K A L M R A R AA S A S AA Wt. 69.9 2.75 79.5 3.13 95.3 3.75 147.3 5.80 4.3 6.47 195.3 7.69 96.8 3.81 109.0 4.29 130.3 5.13 181.1 7.13 3.2 8.00 235.0 9.25 222.3 8.75 3.8 9.60 285.8 1 (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). 47.8 1.88 54.1 2.13 60.5 2.38 260.4 10.25 275.1 10.83 346.2 13.63 82.6 3.25 85.9 3.38 95.3 3.75.9 0.98 29.5 1. 39.6 1.56 31.5 1. 36.6 1.44 95.8 3.77 102.1 4.02 113.5 4.47 54.6 2.15 60.2 2.37 65.8 2.59 5.3 0.21 6.1 0. 7.9 0.31 17.8 0.70 22.4 0.88 21.3 0.84 86.1 3.39 91.9 3.62 102.4 4.03 109.2 4.30 1.4 4.74 131.6 5.18 kg 9.1 12.2 27 22.2 49 C-110 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

CL Series QAAPX 5000 Series Four-Bolt Pillow Blocks QAAPX 5000 Series Four-Bolt Pillow Blocks Part (1) A B C D m D max. E F G H J L M R S Wt. QAAPX13A060S 60 QAAPX13A7S 2 7 76.2 153.7 96.8 176.3 2.8 66.8 285.8 98.6 31.0 103.9 54.6 17.8 22213 QAAPX13A8S 2 1 2 3.00 6.05 3.81 6.94 9.56 2.63 1 3.88 1.22 4.09 2.15 0.70 QAAPX13A065S 65 QAAPX15A211S 2 11 QAAPX15A212S 2 3 4 QAAPX15A070S 70 88.9 173.5 109.0 230.1 265.2 69.9 330.2 108.0 39.1 114.3 60.2 21.3 22215 QAAPX15A215S 2 15 3.50 6.83 4.29 9.06 10.44 2.75 13.00 4.25 1.54 4.50 2.37 0.84 QAAPX15A300S 3 QAAPX15A075S 75 QAAPX18A303S 3 3 QAAPX18A304S 3 1 4 QAAPX18A080S 80 101.6 1.2 130.3 274.6 309.6 76.2 381.0 1.7 38.1 126.2 65.8 21.3 QAAPX18A085S 85 22218 4.00 7.92 5.13 10.81 12.19 3.00 15.00 4.75 1.50 4.97 2.59 0.84 QAAPX18A307S 3 7 QAAPX18A308S 3 1 2 QAAPX18A090S 90 QAAPXA315S 3 15 127.0 239.8 152.4 317.5 355.6 88.9 425.5 139.7 41.4 145.0 75.2 QAAPXA400S 4 222 5.00 9.44 6.00 12.50 14.00 3.50.75 5.50 1.63 7 8 5.71 2.96 QAAPXA100S 100 QAAPX22A110S 110 QAAPX22A407S 4 7 146.1 273.8 159.8 354.1 395.2 101.6 469.9 158.8 45.7 158.8 79.5 28.7 22222 QAAPX22A408S 4 1 2 5.75 10.78 6.29 13.94 15.56 4.00 18.50 6.25 1.80 1 6.25 3.13 1.13 QAAPX22A115S 115 QAAPX26A125S 125 QAAPX26A415S 4 15 155.7 283.2 174.8 387.4 425.5 108.0 514.4 171.5 50.8 28.6 180.3 94.5 37.3 22226 QAAPX26A500S 5 6.13 11.15 6.88 15.25.75 4.25.25 6.75 2.00 1 1 8 7.10 3.72 1.47 QAAPX26A130S 130 (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). 109.2 4.30 1.4 4.74 131.6 5.18 150.4 5.92 158.8 6.25 189.0 7.44 kg 13.2 29.4 45 29.0 64 44.9 99 63.0 139 67.6 149 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-111

CL Series QAC and QAAC Piloted Flange Cartridges QAC and QAAC Piloted Flange Cartridges QA Single-Collar Unit QAA Double-Collar Unit Part (1) QAC08A035S 35 QAC08A107S 1 7 QAC08A108S 1 1 2 QAC09A040S 40 QAC09A111S 1 11 QAC09A112S 1 3 4 QAC09A045S 45 QAC10A115S QAAC10A115S 1 15 QAC10A0S QAAC10A0S 2 QAC10A050S QAAC10A050S 50 QAC11A3S QAAC11A3S 2 3 QAC11A4S QAAC11A4S 2 1 4 QAC11A055S QAAC11A055S 55 QAC13A060S QAAC13A060S 60 QAC13A7S QAAC13A7S QAC13A8S QAAC13A8S QAC13A065S QAAC13A065S 2 7 2 1 2 65 228 229 22210 22211 22213 B Fix 49.8 1.96 54.6 2.15 50.5 1.99 54.4 2.14 60.5 2.38 B L Exp B.C. C D E F G (2) H J K A FIX 51.8 2.04 56.6 2.23 52.6 2.07 56.4 2.22 62.5 2.46 111.3 4.38 130.3 5.13 136.7 5.38 152.4 6.00 5.1 6.50 60.5 2.38 66.8 2.63 73.2 2.88 82.6 3.25 96.8 3.81 92.2 3.63 111.3 4.38 113.5 4.47 127.0 5.00 139.7 5.50 78.5 3.09 91.9 3.62 96.5 3.80 107.7 4. 1.8 4.60 133.4 5.25 155.7 6.13 2.1 6.38 185.4 7.30 193.8 7.63 92.1 3.625 108.0 4.250 114.3 4.500 127.0 5.000 139.7 5.500 (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). (2) Pilot tolerance: +0/-0.051 (+0/-0.002 ). (3) Six-bolt housing. 12.7 0.50 12.7 0.50.0 0.63 14.7 0.58 17.5 0.69 10 7 10 7 10 7 12 1 2 12 1 2 28.7 1.13 31.5 1. 73.7 2.90 77.0 3.03 77.5 3.05 83.1 3.27 88.9 3.50 L EXP M N R A R AA S A S AA Wt. 75.7 2.98 78.2 3.08 79.5 3.13 85.1 3.35 90.9 3.58 44.5 1.75 47.8 1.88 47.5 1.87 50.8 2.00 54.6 2.15 23.9 0.94 22.4 0.88 26.9 1.06 28.7 1.13 28.7 1.13 3.8 0.15 3.8 0.15 4.6 0.18 3.6 0.14 3.0 0.12 18.5 0.73 18.5 0.73.3 0.80 69.9 2.75 73.2 2.88 72.9 2.87 79.5 3.13 86.1 3.39 95.3 3.75 101.6 4.00 109.2 4.30 kg 3.6 8 4.1 9 4.5 10 5.9 13 7.3 Continued on next page. C-112 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

CL Series QAC and QAAC Piloted Flange Cartridges Continued from previous page. QA Single-Collar Unit QAA Double-Collar Unit Part (1) QAC15A211S QAAC15A211S 2 11 QAC15A212S QAAC15A212S 2 3 4 QAC15A070S QAAC15A070S 70 QAC15A215S QAAC15A215S 2 15 QAC15A300S QAAC15A300S 3 QAC15A075S QAAC15A075S 75 QAC18A303S QAAC18A303S 3 3 QAC18A304S QAAC18A304S 3 1 4 QAC18A080S QAAC18A080S 80 QAC18A085S QAAC18A085S 85 QAC18A307S QAAC18A307S 3 7 QAC18A308S QAAC18A308S 3 1 2 QAC18A090S QAAC18A090S 90 QACA315S QAACA315S 3 15 QACA400S QAACA400S 4 QACA100S QAACA100S 100 QAAC22A110S 110 QAAC22A407S (3) 4 7 QAAC22A408S (3) 4 1 2 QAAC22A115S (3) 115 22215 22218 222 22222 B Fix 62.5 2.46 73.2 2.88 72.1 2.84 78.0 3.07 B L Exp B.C. C D E F G (2) H J K A FIX 64.5 2.54 75.2 2.96 74.2 2.92 80.0 3.15 190.5 7.50 219.2 8.63 238.3 9.38 109.0 4.29 130.3 5.13 152.4 6.00 2.1 6.38 187.5 7.38 6.5 8.13 134.6 5.30 154.9 6.10 8.4 6.63 222.3 8.75 262.6 10.34 276.4 10.88 298.5 0.0 254.0 149.4 342.9 11.75 (3) 6.30 10.00 5.88 (3) 13.50 1.9 6.375 187.3 7.375 6.4 8.125 260.4 10.250.6 0.81 36.6 1.44 41.4 1.63 (3) 94.2 3.71 106.4 4.19 L EXP M N R A R AA S A S AA Wt. (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). (2) Pilot tolerance: +0/-0.051 (+0/-0.002 ). (3) Six-bolt housing. 126.0 4.96 126.2 4.97 96.3 3.79 108.5 4.27 128.0 5.04 128.3 5.05 60.2 2.37 65.8 2.59 75.4 2.97 79.5 3.13 33.3 1.31 54.1 2.13 48.3 1.90 2.3 0.09 4.1 0. 9.4 0.37 21.6 0.85 25.1 0.99.9 0.98 32.8 1.29 91.9 3.62 102.4 4.03 1.6 4.59 1.4 4.74 131.6 5.18 150.9 5.94 158.8 6.25 kg 10.0 22 14.5 32 19.5 43 32.7 72 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-113

CL Series QACW and QAACW Piloted Flange Cartridges QACW and QAACW Piloted Flange Cartridges QA Single-Collar Unit QAA Double-Collar Unit Part (1) QACW08A035S 35 QACW08A107S 1 7 QACW08A108S 1 1 2 QACW09A040S 40 QACW09A111S 1 11 QACW09A112S 1 3 4 QACW09A045S 45 QACW10A115S QAACW10A115S 1 15 QACW10A0S QAACW10A0S 2 QACW10A050S QAACW10A050S 50 QACW11A3S QAACW11A3S 2 3 QACW11A4S QAACW11A4S 2 1 4 QACW11A055S QAACW11A055S 55 QACW13A060S QAACW13A060S 60 QACW13A7S QAACW13A7S 2 7 QACW13A8S QAACW13A8S 2 1 2 QACW13A065S QAACW13A065S 65 QACW15A211S QAACW15A211S 2 11 QACW15A212S QAACW15A212S 2 3 4 QACW15A070S QAACW15A070S 70 QACW15A215S QAACW15A215S 2 15 QACW15A300S QAACW15A300S 3 QACW15A075S QAACW15A075S 75 228 229 22210 22211 22213 22215 B FIX 38.9 1.53 38.9 1.53 35.3 1.39 38.9 1.53 47.2 1.86 46.0 1.81 B L EXP B.C. C D E F G (2) H J K A FIX 40.9 1.61 40.1 1.58 37.3 1.47 40.9 1.61 49.3 1.94 48.0 1.89 111.3 4.38 130.3 5.13 136.7 5.38 152.4 6.00 5.1 6.50 190.5 7.50 60.5 2.38 66.8 2.63 73.2 2.88 82.6 3.25 96.8 3.81 109.0 4.29 92.2 3.63 111.3 4.38 113.5 4.47 126.7 4.99 139.7 5.50 2.1 6.38 78.5 3.09 91.9 3.62 96.5 3.80 107.7 4. 1.8 4.60 134.6 5.30 133.4 5.25 155.7 6.13 2.1 6.38 181.1 7.13 193.8 7.63 222.3 8.75 92.1 3.625 108.0 4.250 114.3 4.500 127.0 5.000 139.7 5.500 1.9 6.375 (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). (2) Pilot tolerance: +0/-0.051 (+0/-0.002 ). (3) Six-bolt housing. 12.7 0.50 10.2 0.40 9.7 0.38 14.2 0.56 12.7 0.50 12.7 0.50 10 7 10 7 10 7 12 1 2 12 1 2 28.7 1.13 31.5 1. 73.7 2.90 77.0 3.03 73.4 2.89 80.3 3. 90.2 3.55 93.5 3.68 L EXP M N R A R AA S A S AA Wt. 75.7 2.98 78.2 3.08 75.4 2.97 82.3 3. 92.2 3.63 95.5 3.76 44.5 1.75 47.8 1.88 47.5 1.87 50.8 2.00 54.6 2.15 60.2 2.37 35.1 1.38 38.1 1.5 38.1 1.50 41.4 1.63 42.9 1.69 47.8 1.88 3.8 0.15 4.1 0. 0.5 0.02 0.8 0.03 4.3 0.17 1.5 0.06 22.6 0.89 14.7 0.58 19.1 0.75 26.9 1.06 69.9 2.75 73.2 2.88 72.9 2.87 79.5 3.13 86.1 3.39 91.9 3.62 95.3 3.75 101.6 4.00 109.2 4.30 1.4 4.74 kg 3.6 8 4.1 9 4.5 10 5.9 13 7.3 10.0 22 Continued on next page. C-114 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

CL Series QACW and QAACW Piloted Flange Cartridges Continued from previous page. QA Single-Collar Unit QAA Double-Collar Unit Part (1) QACW18A303S QAACW18A303S QACW18A304S QAACW18A304S QACW18A080S QAACW18A080S QACW18A085S QAACW18A085S QACW18A307S QAACW18A307S QACW18A308S QAACW18A308S QACW18A090S QAACW18A090S QACWA315S QAACWA315S QACWA400S QAACWA400S QACWA100S QAACWA100S QAACW22A110S QAACW22A407S (3) QAACW22A408S (3) QAACW22A115S (3) QAACW26A125S (3) QAACW26A415S (3) QAACW26A500S (3) QAACW26A130S (3) 3 3 3 1 4 80 85 3 7 3 1 2 90 3 15 4 100 22218 222 B FIX 58.2 2.29 65.5 2.58 B L EXP B.C. C D E F G (2) H J K A FIX 60.2 2.37 67.6 2.66 219.2 8.63 238.3 9.38 130.3 5.13 152.4 6.00 187.5 7.38 6.5 8.13 154.9 6.10 8.4 6.63 260.4 10.25 276.4 10.88 187.3 7.375 6.4 8.125 22.4 0.88 36.6 1.44 41.4 1.63 105.9 4.17 123.4 4.86 L EXP M N R A R AA S A S AA Wt. 110 4 7 62.0 64.0 298.5 0.0 254.0 149.4 342.9 260.4 130.0 132.1 79.5 68.3 28.7 22222 4 1 2 2.44 2.52 11.75 (3) 6.30 10.00 5.88 (3) 13.50 10.250 (3) 5.12 5. 3.13 2.69 1.13 115 125 4 15 73.7 75.7 323.9 175.0 266.7 2.1 374.7 279.4 26.2 153.2 155.2 94.5 78.0 35.8 22226 5 2.90 2.98 12.75 (3) 6.89 10.50 6.38 (3) 14.75 10 1.03 7 8 (3) 6.03 6.11 3.72 3.07 1.41 130 (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). (2) Pilot tolerance: +0/-0.051 (+0/-0.002 ). (3) Six-bolt housing. 108.0 4.25 125.5 4.94 65.8 2.59 75.4 2.97 47.8 1.88 57.9 2.28 3.3 0.13 6.9 0.27 21.3 0.84 30.2 1.19 102.4 4.03 1.6 4.59 131.6 5.18 150.9 5.94 158.8 6.25 189.0 7.44 kg 14.5 32 19.5 43 32.7 72 46.3 102 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-115

CL Series QAF and QAAF Square Flange Blocks QAF and QAAF Square Flange Blocks QA Single-Collar Unit QAA Double-Collar Unit Part (1) QAF08A035S QAF08A107S 35 1 7 228 QAF08A108S 1 1 2 228 QAF09A040S QAF09A111S QAF09A112S QAF09A045S QAF10A115S QAAF10A115S QAF10A0S QAAF10A0S QAF10A050S QAAF10A050S QAF11A3S QAAF11A3S QAF11A4S QAAF11A4S QAF11A055S QAAF11A055S QAF13A060S QAAF13A060S QAF13A7S QAAF13A7S QAF13A8S QAAF13A8S QAF13A065S QAAF13A065S 40 1 11 1 3 4 45 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 229 229 22210 22211 22213 B.C. C D E F H J K A L FIX 125.7 4.95 148.3 5.84 148.3 5.84 157.2 6.19 157.2 6.19 175.0 6.89 193.0 7.60 60.5 2.38 60.5 2.38 66.8 2.63 66.8 2.63 73.2 2.88 82.6 3.25 96.8 3.81 93.7 3.69 108.0 4.25 118.4 4.66 118.4 4.66 1.7 4.75 88.9 3.50 104.9 4.13 104.9 4.13 111.3 4.38 111.3 4.38 117.6 4.63 136.7 5.38 136.7 5.38 143.0 5.63 139.7 5.50 22.4 0.88 22.4 0.88 22.4 0.88 22.4 0.88 22.4 0.88 12 1 2 12 1 2 12 1 2 12 1 2 12 1 2 (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). 130.3 5.13 146.1 5.75 1.0 4.88 136.7 5.38 157.2 6.19 8.4 6.63 28.7 1.13 31.5 1. 72.9 2.87 73.7 2.90 79.5 3.13 79.5 3.13 80.8 3.18 83.1 3.27 89.2 3.51 L EXP M N R A R AA S A S AA Wt. 74.9 2.95 75.7 2.98 81.5 3.21 81.5 3.21 82.8 3.26 85.1 3.35 91.2 3.59 44.5 1.75 44.5 1.75 47.8 1.88 47.8 1.88 47.5 1.87 50.8 2.00 54.6 2.15 57.2 2.25 59.4 2.34 63.5 2.50 63.5 2.50 65.0 2.56 66.8 2.63 72.4 2.85 3.0 0.12 3.8 0.15 6.4 0.25 6.4 0.25 7.9 0.31 3.8 0.15 3.0 0.12 15.2 0.60 18.5 0.73.1 0.79 69.9 2.75 69.9 2.75 73.2 2.88 73.2 2.88 72.9 2.87 79.5 3.13 86.1 3.39 95.3 3.75 101.6 4.00 109.2 4.30 kg 4.5 10 4.5 10 5.0 11 5.0 11 5.0 11 6.4 14 7.7 17 Continued on next page. C-1 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

CL Series QAF and QAAF Square Flange Blocks Continued from previous page. Part (1) QAF15A211S QAAF15A211S QAF15A212S QAAF15A212S QAF15A070S QAAF15A070S QAF15A215S QAAF15A215S QAF15A300S QAAF15A300S QAF15A075S QAAF15A075S QAF18A303S QAAF18A303S QAF18A304S QAAF18A304S QAF18A080S QAAF18A080S QAF18A085S QAAF18A085S QAF18A307S QAAF18A307S QAF18A308S QAAF18A308S QAF18A090S QAAF18A090S QAFA315S QAAFA315S QAFA400S QAAFA400S QAFA100S QAAFA100S QAAF22A110S QAAF22A407S QAAF22A408S QAAF22A115S 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 15 4 100 22215 22218 222 B.C. C D E F H J K A L FIX 215.4 8.48 251.7 9.91 278.4 10.96 109.0 4.29 130.3 5.13 152.4 6.00 8.9 6.65 193.8 7.63 2.0 8.82 152.4 6.00 177.8 7.00 196.9 7.75 189.0 7.44 219.2 8.63 253.2 9.97 26.9 1.06 33.3 1.31 38.1 1.50 QA Single-Collar Unit 7 8 36.6 1.44 41.4 1.63 95.8 3.77 107.2 4.22 126.0 4.96 L EXP M N R A R AA S A S AA Wt. 110 4 7 314.5 0.0 222.3 222.3 276.4 38.1 135.6 137.7 79.5 106.9 23.4 22222 4 1 2 12.38 6.30 8.75 8.75 10.88 1.50 7 8 5.34 5.42 3.13 4.21 0.92 115 (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). 97.8 3.85 109.2 4.30 128.0 5.04 60.2 2.37 65.8 2.59 75.4 2.97 76.2 3.00 84.1 3.31 103.1 4.06 QAA Double-Collar Unit 3.8 0.15 4.8 0.19 9.4 0.37.6 0.97.4 0.96.1 0.95 91.9 3.62 102.4 4.03 1.6 4.59 1.4 4.74 131.6 5.18 150.4 5.92 158.8 6.25 kg 10.4 23 15.9 35.9 55 28.6 63 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-117

CL Series QAFL and QAAFL Square Flange Blocks QAFL and QAAFL Square Flange Blocks QA Single-Collar Unit QAA Double-Collar Unit Part (1) QAFL08A035S QAFL08A107S QAFL08A108S QAFL09A040S QAFL09A111S QAFL09A112S QAFL09A045S QAFL10A115S QAAFL10A115S QAFL10A0S QAAFL10A0S QAFL10A050S QAAFL10A050S QAFL11A3S QAAFL11A3S QAFL11A4S QAAFL11A4S QAFL11A055S QAAFL11A055S QAFL13A060S QAAFL13A060S QAFL13A7S QAAFL13A7S QAFL13A8S QAAFL13A8S QAFL13A065S QAAFL13A065S 35 1 7 1 1 2 40 1 11 1 3 4 45 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 228 229 22210 22211 22213 B.C. C D E F G (2) (3) (4) H J K A L FIX 127.0 5.00 139.7 5.50 146.1 5.75 2.1 6.38 171.5 6.75 60.5 2.38 66.8 2.63 73.2 2.88 82.6 3.25 96.8 3.81 93.7 3.69 118.4 4.66 1.7 4.75 1 5.19 146.1 5.75 89.9 3.54 98.8 3.89 103.4 4.07 114.3 4.50 121.2 4.77 117.6 4.63 136.7 5.38 1 5.19 149.4 5.88 157.2 6.19 N/A N/A N/A N/A 22.4 0.88 22.4 0.88 N/A 23.1 0.91 N/A 19.1 0.75 N/A (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). (2) Pilot tolerance: +0/-0.05 (+0/-0.002 ). (3) Add (p) to the end of the housing designation in the part number to order with pilot using G dimension. (4) Piloted flange blocks will be quoted (price and delivery) upon request. For optional spigot on flange side, insert the letter P as seen in the following example: QMFP**J***S. 12 1 2 12 1 2 12 1 2 28.7 1.13 31.5 1. 72.9 2.87 79.5 3.13 80.8 3.18 83.3 3.28 89.2 3.51 L EXP M N R A R AA S A S AA Wt. 74.9 2.95 81.5 3.21 82.8 3.26 85.3 3.36 91.2 3.59 44.5 1.75 47.8 1.88 47.5 1.87 50.8 2.00 54.6 2.15 57.2 2.25 63.5 2.50 62.5 2.46 66.8 2.63 72.6 2.86 3.0 0.12 6.6 0.26 7.9 0.31 3.8 0.15 3.0 0.12 15.2 0.60 18.3 0.72.1 0.79 69.9 2.75 73.2 2.88 72.9 2.87 79.5 3.13 86.1 3.39 95.3 3.75 101.6 4.00 109.2 4.30 kg 4.5 10 5.0 11 5.0 11 6.4 14 7.7 17 Continued on next page. C-118 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

CL Series QAFL and QAAFL Square Flange Blocks QA Single-Collar Unit QAA Double-Collar Unit Continued from previous page. Part (1) QAFL15A211S QAAFL15A211S QAFL15A212S QAAFL15A212S QAFL15A070S QAAFL15A070S QAFL15A215S QAAFL15A215S QAFL15A300S QAAFL15A300S QAFL15A075S QAAFL15A075S QAFL18A303S QAAFL18A303S QAFL18A304S QAAFL18A304S QAFL18A080S QAAFL18A080S QAFL18A085S QAAFL18A085S QAFL18A307S QAAFL18A307S QAFL18A308S QAAFL18A308S QAFL18A090S QAAFL18A090S QAFLA315S QAAFLA315S QAFLA400S QAAFLA400S QAFLA100S QAAFLA100S 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 15 4 100 22215 22218 222 B.C. C D E F G (2) (3) (4) H J K A L FIX 0.2 7.88 1.3 9.50 273.1 10.75 109.0 4.29 130.3 5.13 152.4 6.00 8.4 6.63 193.8 7.63 229.6 9.04 141.2 5.56 170.7 6.72 193.0 7.60 182.6 7.19 212.9 8.38 1.3 9.50 N/A 26.9 1.06 187.33 7.375 215.90 8.500 32.5 1.28 36.6 1.44 95.8 3.77 106.4 4.19 L EXP M N R A R AA S A S AA Wt. (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). (2) Pilot tolerance: +0/-0.05 (+0/-0.002 ). (3) Add (p) to the end of the housing designation in the part number to order with pilot using G dimension. (4) Piloted flange blocks will be quoted (price and delivery) upon request. For optional spigot on flange side, insert the letter P as seen in the following example: QMFP**J***S. 38.1 1.50 1 41.4 1.63 132.3 5.21 97.8 3.85 108.5 4.27 134.4 5.29 60.2 2.37 65.8 2.59 75.4 2.97 74.4 2.93 86.4 3.40 104.6 4.12 3.8 0.15 4.1 0. 15.7 0.62.6 0.97 25.1 0.99 18.0 0.71 91.9 3.62 102.4 4.03 1.6 4.59 1.4 4.74 131.6 5.18 150.4 5.92 kg 10.4 23 15.9 35.9 55 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-119

CL Series QAAFX 5000 Series Flange Blocks QAAFX 5000 Series Flange Blocks Part QAAFX10A115S QAAFX10A0S QAAFX10A050S QAAFX11A3S QAAFX11A4S QAAFX11A055S QAAFX13A060S QAAFX13A7S QAAFX13A8S QAAFX13A065S QAAFX15A211S QAAFX15A212S QAAFX15A070S QAAFX15A215S QAAFX15A300S QAAFX15A075S QAAFX18A303S QAAFX18A304S QAAFX18A080S QAAFX18A085S QAAFX18A307S QAAFX18A308S QAAFX18A090S QAAFXA315S QAAFXA400S QAAFXA100S QAAFX22A110S QAAFX22A407S (4) QAAFX22A408S (4) QAAFX22A115S (4) QAAFX26A125S (4) QAAFX26A415S (4) QAAFX26A500S (4) QAAFX26A130S (4) 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 15 4 100 110 4 7 4 1 2 115 125 4 15 5 130 22210 22211 22213 22215 22218 222 22222 22226 B.C. C D E F G (1) (2) (3) H J 146.1 5.75 1.5 6.36 180.8 7.12 215.9 8.50 1.3 9.50 298.5 11.75 73.2 2.88 82.6 3.25 96.8 3.81 109.0 4.29 130.3 5.13 152.4 6.00 327.2 12.88 (4) 0.0 6.30 355.6 175.0 14.00 (4) 6.89 1.7 4.75 130.3 5.13 146.1 5.75 8.9 6.65 193.8 7.63 215.9 8.50 256.5 10.10 284.2 11.19 103.1 4.06 114.3 4.50 127.8 5.03 152.7 6.01 170.7 6.72 211.1 8.31 134.9 5.31 149.4 5.88 157.2 6.19 189.0 7.44 212.9 8.38 268.2 10.56 3.6 384.3 6.44 (4) 15.13 177.8 419.1 7.00 (4).50 111.13 4.375 127.00 5.000 138.13 5.438 0.35 6.313 187.33 7.375 23 8.875 263.53 10.375 284.18 11.188 22.4 0.88 26.9 1.06 33.3 1.31 38.1 1.50 38.1 1.50 12 1 2 7 8 7 8 L FIX 80.8 3.18 83.1 3.27 89.2 3.51 96.0 3.78 107.2 4.22 126.0 4.96 143.8 5.66 174.8 1 6.88 L EXP M N R S Wt. (1) Pilot tolerance: +0/-0.05 (+0/-0.002 ). (2) Add (p) to the end of the housing designation in the part number to order with pilot using G dimension. (3) Piloted flange blocks will be quoted (price and delivery) upon request. For optional spigot on flange side, insert the letter P as seen in the following example: QMFP**J***S. (4) Six-bolt round housing. 82.8 3.26 85.1 3.35 91.2 3.59 98.0 3.86 109.2 4.30 128.0 5.04 145.8 5.74 176.8 6.96 47.5 1.87 50.5 1.99 54.6 2.15 60.2 2.37 65.8 2.59 75.4 2.97 94.0 3.70 94.5 3.72 65.0 2.56 66.8 2.63 72.4 2.85 76.2 3.00 84.1 3.31 103.1 4.06 106.9 4.21 135.1 5.32 15.2 0.60 18.5 0.73 19.6 0.77.4 0.96.6 0.97.6 0.97 15.0 0.59 14.2 0.56 95.3 3.75 101.6 4.00 109.2 4.30 1.4 4.74 131.6 5.18 150.4 5.92 158.8 6.25 189.0 7.44 kg 5.4 12 6.8 15 8.6 19 12.7 28 19.1 42 29.9 66 46.3 102 52.2 115 C-1 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

CL Series QAFY and QAAFY Round Flange Blocks QAFY and QAAFY Round Flange Blocks QA Single-Collar Unit QAA Double-Collar Unit Part (1) QAFY08A035S (6) QAFY08A107S (6) QAFY08A108S (6) QAFY09A040S QAFY09A111S QAFY09A112S QAFY09A045S QAFY10A115S QAAFY10A115S QAFY10A0S QAAFY10A0S QAFY10A050S QAAFY10A050S QAFY11A3S QAAFY11A3S QAFY11A4S QAAFY11A4S QAFY11A055S QAAFY11A055S QAFY13A060S QAAFY13A060S QAFY13A7S QAAFY13A7S QAFY13A8S QAAFY13A8S QAFY13A065S QAAFY13A065S 35 1 7 1 1 2 40 1 11 1 3 4 45 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 228 229 22210 22211 22213 B.C. C D E F G (2)(3)(4) H J K A L FIX 127.0 5.00 139.7 5.50 146.1 5.75 2.1 6.38 171.5 6.75 60.5 2.38 66.8 2.63 73.2 2.88 82.6 3.25 96.8 3.81 108.0 4.25 104.9 4.13 115.3 4.54 130.3 5.13 146.1 5.75 89.9 3.54 98.8 3.89 103.4 4.07 114.3 4.50 121.2 4.77 158.8 6.25 171.5 6.75 177.8 7.00 196.9 7.75 6.5 8.13 90.50 3.563 103. 4.063 111.13 4.375 127.00 5.000 138.13 5.438 (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). (2) Pilot tolerance: +0/-0.05 (+0/-0.002 ). (3) Add (p) to the end of the housing designation in the part number to order with pilot using G dimension. (4) Piloted flange blocks will be quoted (price and delivery) upon request. For optional spigot on flange side, insert the letter P as seen in the following example: QMFP**J***S. (5) Six-bolt housing. (6) Three-bolt housing. 19.1 0.75.6 0.81 19.1 0.75 19.1 0.75 23.9 0.94 12 1 2 12 1 2 12 1 2 28.7 1.13 31.5 1. 73.2 2.88 76.2 3.00 75.9 2.99 82.3 3. 91.2 3.59 L EXP M N R A R AA S A S AA Wt. 75.2 2.96 78.2 3.08 78.0 3.07 84.3 3.32 93.2 3.67 44.5 1.75 47.8 1.88 47.5 1.87 50.8 2.00 54.6 2.15 57.4 2.26 60.5 2.38 57.2 2.25 62.0 2.44 72.4 2.85 3.3 0.13 3.0 0.12 3.0 0.12 3.0 0.12 5.1 0..1 0.79 19.3 0.76.6 0.81 69.9 2.75 73.2 2.88 72.9 2.87 79.5 3.13 86.1 3.39 95.3 3.75 101.6 4.00 109.2 4.30 kg 4.5 10 5.0 11 5.4 12 6.8 15 8.6 19 Continued on next page. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-121

CL Series QAFY and QAAFY Round Flange Blocks QAFY and QAAFY Round Flange Blocks continued Continued from previous page. QA Single-Collar Unit QAA Double-Collar Unit Part (1) B.C. C D E F G (2)(3)(4) H J K A L FIX L EXP M N R A R AA S A S AA Wt. QAFY15A211S QAAFY15A211S 2 11 QAFY15A212S QAAFY15A212S 2 3 4 QAFY15A070S 70 QAAFY15A070S 0.2 109.0 8.4 141.5 1.3 0.35 23.9 98.3 100.3 60.2 74.4 6.4 21.8 91.9 1.4 22215 QAFY15A215S 7.88 4.29 6.63 5.57 9.50 6.313 0.94 3.87 3.95 2.37 2.93 0.25 0.86 3.62 4.74 2 QAAFY15A215S QAFY15A300S QAAFY15A300S 3 QAFY15A075S QAAFY15A075S 75 QAFY18A303S QAAFY18A303S 3 3 QAFY18A304S QAAFY18A304S 3 1 4 QAFY18A080S QAAFY18A080S 80 QAFY18A085S 1.3 130.3 193.8 170.7 282.7 22218 N/A 28.7 36.6 108.7 110.7 65.8 85.3 6.4 22.9 102.4 131.6 85 QAAFY18A085S 9.50 5.13 7.63 6.72 11.13 1.13 7 8 1.44 4.28 4.36 2.59 3.36 0.25 0.90 4.03 5.18 QAFY18A307S QAAFY18A307S 3 7 QAFY18A308S QAAFY18A308S 3 1 2 QAFY18A090S QAAFY18A090S 90 QAFYA315S QAAFYA315S 3 15 QAFYA400S 273.1 152.4 212.9 193.0 3.8 222 N/A 28.7 41.4 123.7 125.7 75.4 96.8 6.9 26.7 1.6 150.4 4 QAAFYA400S 10.75 6.00 8.38 7.60 12.63 1.13 1 1.63 4.87 4.95 2.97 3.81 0.27 1.05 4.59 5.92 QAFYA100S QAAFYA100S 100 QAAFY22A110S (5) 110 QAAFY22A407S (5) 4 7 327.2 0.0 254.0 3.6 384.3 22222 N/A 129.0 131.1 79.5 100.3 30.0 158.8 QAAFY22A408S (5) 4 1 2 12.88 (5) 6.30 10.00 6.44 (5) 15.13 1 (5) 5.08 5. 3.13 3.95 1.18 6.25 QAAFY22A115S (5) 115 QAAFY26A125S (5) 125 QAAFY26A415S (5) 4 15 355.6 175.0 284.2 177.8 419.1 22226 N/A 38.1 27 9.9 172.0 94.5 139.7 19.1 189.0 14.00 (5) 6.89 11.19 7.00 (5).50 1.50 1 1 QAAFY26A500S (5) 5 8 (5) 6.69 6.77 3.72 5.50 0.75 7.44 QAAFY26A130S (5) 130 (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). (2) Pilot tolerance: +0/-0.05 (+0/-0.002 ). (3) Add (p) to the end of the housing designation in the part number to order with pilot using G dimension. (4) Piloted flange blocks will be quoted (price and delivery) upon request. For optional spigot on flange side, insert the letter P as seen in the following example: QMFP**J***S. (5) Six-bolt housing. (6) Three-bolt housing. kg 12.7 28 19.1 42 29.9 66 46.3 102 52.2 115 C-122 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

CL Series QAMC and QAAMC Cartridge Blocks QAMC and QAAMC Cartridge Blocks QA Single-Collar Unit QAA Double-Collar Unit Part (1) QAMC10A115S QAAMC10A115S QAMC10A0S QAAMC10A0S QAMC10A050S QAAMC10A050S QAMC11A3S QAAMC11A3S QAMC11A4S QAAMC11A4S QAMC11A055S QAAMC11A055S QAMC13A060S QAAMC13A060S QAMC13A7S QAAMC13A7S QAMC13A8S QAAMC13A8S QAMC13A065S QAAMC13A065S QAMC15A211S QAAMC15A211S QAMC15A212S QAAMC15A212S QAMC15A070S QAAMC15A070S QAMC15A215S QAAMC15A215S QAMC15A300S QAAMC15A300S QAMC15A075S QAAMC15A075S 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 22210 22211 22213 22215 A B C D F G K A L FIX 13.5 0.53 13.5 0.53 13.5 0.53 15.0 0.59 23.1 0.91 23.1 0.91 23.1 0.91 26.2 1.03 73.2 2.88 82.6 3.25 96.8 3.81 109.0 4.29 4.8 0.19 4.8 0.19 3.6 0.14 6.4 0.25 104.78 (+0/-0.05) 4.125 (+0/-0.002) 115.09 (+0/-0.05) 4.531 (+0/-0.002) 127.00 (+0/-0.05) 5.000 (+0/-0.002) 149.225 (+0/-0.05) 5.875 (+0/-0.002) (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). 62.2 2.45 65.5 2.58 69.3 2.73 79.8 3.14 28.7 1.13 31.5 1. 79.2 3.12 83.8 3.30 85.9 3.38 100.6 3.96 L EXP M R A R AA S A S AA Wt. 81.3 3. 85.9 3.38 87.9 3.46 102.6 4.04 47.5 1.87 50.8 2.00 54.6 2.15 60.2 2.37 6.1 0. 4.1 0. 0.0 0.00 8.1 0.32.8 0.66 18.0 0.71 14.0 0.55 19.8 0.78 72.9 2.87 79.5 3.13 86.1 3.39 91.9 3.62 95.3 3.75 101.6 4.00 109.2 4.30 1.4 4.74 kg 3.6 8 4.5 10 5.4 12 8.2 18 Continued on next page. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-123

CL Series QAMC and QAAMC Cartridge Blocks QAMC and QAAMC Cartridge Blocks continued Continued from previous page. QA Single-Collar Unit QAA Double-Collar Unit Part (1) QAMC18A303S QAAMC18A303S QAMC18A304S QAAMC18A304S QAMC18A080S QAAMC18A080S QAMC18A085S QAAMC18A085S QAMC18A307S QAAMC18A307S QAMC18A308S QAAMC18A308S QAMC18A090S QAAMC18A090S QAMCA315S QAAMCA315S QAMCA400S QAAMCA400S QAMCA100S QAAMCA100S QAAMC22A110S QAAMC22A407S QAAMC22A408S QAAMC22A115 QAAMC26A125S QAAMC26A415S QAAMC26A500S QAAMC26A130S 3 3 3 1 4 80 85 3 7 3 1 2 90 3 15 4 100 110 4 7 4 1 2 115 125 4 15 5 130 22218 222 22222 22226 A B C D F G K A L FIX 15.0 0.59 19.8 0.78 19.8 0.78 19.8 0.78 26.9 1.06 32.5 1.28 38.1 1.50 38.1 1.50 130.3 5.13 152.4 6.00 0.0 6.30 175.0 6.89 5.8 0.23 7.9 0.31 7.9 0.31 7.9 0.31 171.45 (+0/-0.05) 6.750 (+0/-0.002) 6.375 (+0/-0.05) 8.125 (+0/-0.002) 222.25 (+0/-0.08) 8.75 (+0/-0.003) 265.13 (+0/-0.08) 10.438 (+0/-0.003) 87.6 3.45 105.2 4.14 108.5 4.27 36.6 1.44 41.4 1.63 110.2 4.34 128.3 5.05 133.6 5.26 L EXP M R A R AA S A S AA Wt. (1) part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions). 141.7 5.58 5.4 6.51 112.3 4.42 130.3 5.13 135.6 5.34 7.4 6.59 65.8 2.59 75.4 2.97 79.5 3.13 94.5 3.72 7.4 0.29 11.4 0.45 21.3 0.84 22.6 0.89 25.1 0.99 23.6 0.93 102.4 4.03 1.6 4.59 131.6 5.18 150.9 5.94 158.8 6.25 189.0 7.44 kg 11.8 26 14.5 32 18.1 40 18.1 40 C-1 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

CL Series QATU and QAATU Take-Up Blocks QATU and QAATU Take-Up Blocks QA Single-Collar Unit QAA Double-Collar Unit Part (1) QATU10A115S QAATU10A115S QATU10A0S QAATU10A0S QATU10A050S QAATU10A050S QATU11A3S QAATU11A3S QATU11A4S QAATU11A4S QATU11A055S QAATU11A055S QATU13A060S QAATU13A060S QATU13A7S QAATU13A7S QATU13A8S QAATU13A8S QATU13A065S QAATU13A065S QATU15A211S QAATU15A211S QATU15A212S QAATU15A212S QATU15A070S QAATU15A070S QATU15A215S QAATU15A215S QATU15A300S QAATU15A300S QATU15A075S QAATU15A075S 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 22210 22211 22213 22215 A C D E F G J K A L M N P S Wt. 54.1 2.13 60.5 2.38 69.9 2.75 76.2 3.00 19.1 0.75 19.1 0.75 22.4 0.88 1.7 4.75 133.4 5.25 149.4 5.88 171.5 6.75 101.6 4.00 114.3 4.50 130.3 5.13 150.9 5.94 26.9 1.06 28.7 1.13 33.3 1.31 39.6 1.56 26.9 1.06 30.2 1.19 33.3 1.31 39.6 1.56 (1) part numbers use QA to designate single-collar units and QAA to designate double-collar units. NOTE: Please refer to page C-9 for take-up frames. 73.2 2.88 88.9 3.50 95.3 3.75 108.0 4.25 28.7 1.13 31.5 1. 153.4 6.04 7.9 6.61 193.8 7.63 219.7 8.65 47.5 1.87 50.8 2.00 54.6 2.15 60.2 2.37 75.7 2.98 81.8 3.22 91.2 3.59 97.0 3.82 88.9 3.50 95.3 3.75 1.7 4.75 1.7 4.75 17.5 0.69.6 0.81 26.9 1.06 46.0 1.81 kg 7.7 17 9.5 21 12.2 27 15.9 35 Continued on next page. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-125

CL Series QATU and QAATU Take-Up Blocks QATU and QAATU Take-Up Blocks continued QA Single-Collar Unit QAA Double-Collar Unit Continued from previous page. Part (1) QATU18A303S QAATU18A303S QATU18A304S QAATU18A304S QATU18A080S QAATU18A080S QATU18A085S QAATU18A085S QATU18A307S QAATU18A307S QATU18A308S QAATU18A308S QATU18A090S QAATU18A090S QATUA315S QAATUA315S QATUA400S QAATUA400S QATUA100S QAATUA100S QAATU22A110S QAATU22A407S QAATU22A408S QAATU22A115S QAATU26A125S QAATU26A415S QAATU26A500S QAATU26A130S 3 3 3 1 4 80 85 3 7 3 1 2 90 3 15 4 100 110 4 7 4 1 2 115 125 4 15 5 130 22218 222 22222 22226 A C D E F G J K A L M N P S Wt. 92.2 3.63 104.9 4.13 128.5 5.06 134.9 5.31 28.7 1.13 38.1 1.50 63.5 2.50 193.8 7.63 239.8 9.44 263.7 10.38 285.8 1 173.0 6.81 219.2 8.63 1.3 9.50 260.4 10.25 46.0 1.81 54.1 2.13 54.1 2.13 63.5 2.50 47.8 1.88 52.3 2.06 54.1 2.13 60.5 2.38 (1) part numbers use QA to designate single-collar units and QAA to designate double-collar units. NOTE: Please refer to page C-9 for take-up frames. 1.0 4.88 143.0 5.63 2.1 6.38 177.8 7.00 36.6 1.44 41.4 1.63 257.0 10.12 296.9 11.69 341.4 13.44 396.7 15.62 65.8 2.59 75.4 2.97 79.5 3.13 94.5 3.72 107.2 4.22 121.7 4.79 143.8 5.66 150.9 5.94 158.8 6.25 177.8 7.00 199.9 7.87 228.6 9.00 46.0 1.81 52.3 2.06 52.3 2.06 52.3 2.06 kg.0 44 26.3 58 36.4 80 60.8 134 C-126 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

CL Series QAMH and QAAMH Hanger Blocks QAMH and QAAMH Hanger Blocks Part QAMH15A211S QAAMH15A211S QAMH15A212S QAAMH15A212S QAMH15A070S QAAMH15A070S QAMH15A215S QAAMH15A215S QAMH15A300S QAAMH15A300S QAMH15A075S QAAMH15A075S QAMH18A303S QAAMH18A303S QAMH18A304S QAAMH18A304S QAMH18A080S QAAMH18A080S QAMH18A085S QAAMH18A085S QAMH18A307S QAAMH18A307S QAMH18A308S QAAMH18A308S QAMH18A090S QAAMH18A090S 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 22215 22218 A B C D E F G J K A L M R A R AA S A S AA Wt. 1 5.19 0.3 6.31 212.9 8.38 260.4 10.25 109.0 4.29 130.3 5.13 2.1 6.38 0.2 7.88 50.8 2.00 63.5 2.50 50.8 2.00 76.2 3.00 69.9 2.75 76.2 3.00 1-8UNC 1 1 4-7UNC 36.6 1.44 91.9 3.62 99.3 3.91 60.2 2.37 65.8 2.59 0.0 0.00 3.0 0.12 28.4 1.12 32.3 1.27 91.9 3.62 102.4 4.03 1.7 4.75 131.6 5.18 kg 10.0 22.3 36 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-127

EC Series C-128 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

EC Series EC Series The reduced eccentric offset of our EC series locking collar results in a secure shaft lock that is designed not to release from a properly prepared shaft. EC series housed units also are suitable for reversing applications. You Have Choices For the EC series, you can select from many seal configurations and housing styles, which are shown on page C-130. Housings Two-bolt pillow blocks. Four-bolt pillow blocks. Flange blocks. Piloted flange cartridges. Take-up blocks. Cartridge blocks. Hanger blocks. Fig. C-45. EC series eccentric lock. Seals Labyrinth: DuPont Teflon (T). Triple-lip: nitrile rubber (M), urethane (O) and DuPont Viton (N). Double-lip: nitrile rubber (B) and DuPont Viton (C). Steel and urethane closed-end covers (CS). Steel and urethane open-end covers (CJ) with: DuPont Teflon (T). Triple-lip seal (DR). V-ring seal (VR). Piloted flange cartridge backing plates (HSY) with: Triple-lip seal (DR). Flange block backing plates (UFP). V-ring (VR). TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-129

EC Series EC Series Housing Type Primary Seals M N O B C T Open-End Cover Secondary Seals and Covers HSY Flange Cartridge Backing Plate Closed-End DR VR T Cover DR Pillow Block UFP Backing Plate V-Lock (Timken Exclusive Double Taper Lock) Flange Block Piloted Flange Cartridge Take-Up Block Cartridge Block Pillow Block Flange Block CL Series (Set Screw Lock) Piloted Flange Cartridge Take-Up Block Cartridge Block Hangar Block Pillow Block Flange Block EC Series (Eccentric Lock) Piloted Flange Cartridge Take-Up Block Cartridge Block Hangar Block Pillow Block TA Series (Tapered Adapter Lock) Flange Block Piloted Flange Cartridge Cartridge Block Pillow Block DV Series (Tapered Adapter Lock) Flange Block Piloted Flange Cartridge C-130 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

EC Series QMP Two-Bolt Pillow Blocks QMP Two-Bolt Pillow Blocks Part QMP08J035S QMP08J107S 35 1 7 228 QMP08J108S 1 1 2 228 QMP09J111S 1 11 229 QMP09J040S QMP09J112S QMP09J045S QMP10J115S QMP10J0S QMP10J050S QMP11J3S QMP11J4S QMP11J055S QMP13J060S QMP13J7S QMP13J8S QMP13J065S QMP15J211S QMP15J212S QMP15J070S QMP15J215S QMP15J300S QMP15J075S QMP18J303S QMP18J304S QMP18J080S QMP18J085S QMP18J307S QMP18J308S QMP18J090S QMPJ311S QMPJ312S QMPJ315S QMPJ400S QMPJ100S 40 1 3 4 45 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 11 3 3 4 3 15 4 100 229 22210 22211 22213 22215 22218 222 A B C D m D max. F G H J K L M R S Wt. 47.8 1.88 54.1 2.13 54.1 2.13 57.2 2.25 57.2 2.25 63.5 2.50 69.9 2.75 79.5 3.13 95.3 3.75 104.9 4.13 94.7 3.73 101.1 3.98 104.9 4.13 108.0 4.25 122.2 4.81 133.4 5.25 147.3 5.80 4.3 6.47 195.3 7.69 9.8 8.26 60.5 2.38 60.5 2.38 66.5 2.62 66.5 2.62 71.4 2.81 75.9 2.99 91.9 3.62 101.9 4.01 1.9 4.76 152.4 6.00 119.1 4.69 119.1 4.69 144.8 5.70 158.8 6.25 152.4 6.00 5.1 6.50 174.8 6.88 0.2 7.88 238.3 9.38 255.0 10.04 152.4 6.00 5.1 6.50 5.1 6.50 180.8 7.12 181.1 7.13 0.2 7.88 219.2 8.63 4.6 9.63 285.8 1 3.0 12.60 174.8 6.88 0.2 7.88 0.2 7.88 225.6 8.88 225.6 8.88 4.6 9.63 260.4 10.25 295.4 11.63 342.9 13.50 362.0 14.25 57.2 2.25 57.2 2.25 60.2 2.37 62.0 2.44 62.0 2.44 66.8 2.63 73.7 2.90 76.2 3.00 86.6 3.41 94.7 3.73 35.1 1.38 35.1 1.38 47.8 1.88 50.8 2.00 12 1 2 12 1 2 12 1 2 7 8 1 28.7 1.13 31.5 1. 36.6 1.44 41.4 1.63 73.2 2.88 73.2 2.88 77.7 3.06 78.7 3.10 79.0 3.11 84.1 3.31 91.2 3.59 98.3 3.87 109.2 4.30 122.9 4.84 44.5 1.75 44.5 1.75 47.8 1.88 47.8 1.88 47.5 1.87 50.8 2.00 54.1 2.13 60.2 2.37 65.8 2.59 75.2 2.96 3.3 0.13 3.3 0.13 4.8 0.19 5.8 0.23 6.1 0. 4.8 0.19 5.3 0.21 6.4 0.25 7.1 0.28 6.1 0. 69.9 2.75 69.9 2.75 73.2 2.88 73.2 2.88 72.9 2.87 79.5 3.13 85.6 3.37 91.9 3.62 102.4 4.03 1.6 4.59 kg 4.1 9 4.1 9 4.5 10 4.5 10 5.9 13 7.7 17 10.0 22 12.7 28.4 45 26.8 59 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-131

EC Series QMPL Two-Bolt Pillow Blocks QMPL Two-Bolt Pillow Blocks Part QMPL08J035S QMPL08J107S QMPL08J108S QMPL09J040S QMPL09J111S QMPL09J112S QMPL09J045S QMPL10J115S QMPL10J0S QMPL10J050S QMPL11J3S QMPL11J4S QMPL11J055S QMPL13J060S QMPL13J7S QMPL13J8S QMPL13J065S QMPL15J211S QMPL15J212S QMPL15J070S QMPL15J215S QMPL15J300S QMPL15J075S QMPL18J303S QMPL18J304S QMPL18J080S QMPL18J085S QMPL18J307S QMPL18J308S QMPL18J090S QMPLJ311S QMPLJ312S QMPLJ315S QMPLJ400S QMPLJ100S 35 1 7 1 1 2 40 1 11 1 3 4 45 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 11 3 3 4 3 15 4 100 228 229 22210 22211 22213 22215 22218 222 A B C D m D max. F G H J K L M R S Wt. 47.8 1.88 54.1 2.13 57.2 2.25 63.5 2.50 69.9 2.75 82.6 3.25 95.3 3.75 108.0 4.25 94.7 3.73 104.9 4.13 122.2 4.81 133.4 5.25 147.3 5.80 7.4 6.59 195.3 7.69 212.9 8.38 60.5 2.38 66.5 2.62 71.4 2.81 75.9 2.99 91.9 3.62 101.9 4.01 1.9 4.76 152.4 6.00 119.1 4.69 133.4 5.25 150.6 5.93 5.1 6.50 173.0 6.81 195.6 7.70 235.0 9.25 255.0 10.04 152.4 6.00 146.1 5.75 1.5 6.36 179.3 7.06 189.0 7.44 213.4 8.40 273.1 10.75 3.0 12.60 174.8 6.88 181.1 7.13 212.9 8.38 225.6 8.88 235.0 9.25 265.2 10.44 330.2 13.00 362.0 14.25 57.2 2.25 60.2 2.37 62.0 2.44 65.5 2.58 73.7 2.90 76.2 3.00 86.6 3.41 94.7 3.73 35.1 1.38 35.1 1.38 47.8 1.88 53.8 2.12 12 1 2 12 1 2 7 8 1 28.4 1.12 31.5 1. 36.6 1.44 41.4 1.63 73.2 2.88 77.7 3.06 79.0 3.11 83.3 3.28 90.9 3.58 98.3 3.87 109.2 4.30 122.9 4.84 44.5 1.75 47.8 1.88 47.5 1.87 50.8 2.00 54.1 2.13 60.2 2.37 65.8 2.59 75.2 2.96 3.3 0.13 4.8 0.19 6.1 0. 4.3 0.17 5.3 0.21 6.4 0.25 7.1 0.28 6.1 0. 69.9 2.75 73.2 2.88 72.9 2.87 79.2 3.12 85.6 3.37 91.9 3.62 102.4 4.03 1.6 4.59 kg 4.1 9 4.5 10 5.9 13 7.7 17 10.0 22 12.7 28.4 45 26.8 59 C-132 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

EC Series QMPF Four-Bolt Pillow Blocks QMPF Four-Bolt Pillow Blocks Part QMPF13J060S QMPF13J7S QMPF13J8S QMPF13J065S QMPF15J211S QMPF15J212S QMPF15J070S QMPF15J215S QMPF15J300S QMPF15J075S QMPF18J303S QMPF18J304S QMPF18J080S QMPF18J085S QMPF18J307S QMPF18J308S QMPF18J090S QMPFJ311S QMPFJ312S QMPFJ315S QMPFJ400S QMPFJ100S QMPF22J110S QMPF22J407S QMPF22J408S QMPF22J115S QMPF26J125S QMPF26J415S QMPF26J500S QMPF26J130S QMPF30J507S QMPF30J508S QMPF30J140S QMPF30J515S QMPF30J600S QMPF30J150S QMPF34J607S QMPF34J608S QMPF34J170S QMPF34J615S QMPF34J700S QMPF34J180S 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 11 3 3 4 3 15 4 100 110 4 7 4 1 2 115 125 4 15 5 130 5 7 5 1 2 140 5 15 6 150 6 7 6 1 2 170 6 15 7 180 22213 22215 22218 222 22222 22226 23230 23234 A B C D m D max. E F G H J K L M R S Wt. 69.9 2.75 82.6 3.25 95.3 3.75 108.0 4.25 1.7 4.75 139.7 5.50 9.9 6.69 190.5 7.50 147.3 5.80 7.6 6.60 195.3 7.69 223.0 8.78 233.4 9.19 279.7 11.01 330.2 13.00 390.7 15.38 91.9 3.62 101.9 4.01 1.9 4.76 152.4 6.00 0.0 6.30 175.0 6.89 5.0 8.07 235.0 9.25 174.8 6.88 193.0 7.60 225.6 8.88 276.4 10.88 301.8 11.88 349.3 13.75 441.5 17.38 530.4.88 193.8 7.63 231.1 9.10 276.4 10.88 339.9 13.38 368.3 14.50 403.4 15.88 485.9 19.13 600.2 23.63 44.5 1.75 47.8 1.88 50.8 2.00 57.2 2.25 63.5 2.50 69.9 2.75 95.3 3.75 117.5 4.625 235.0 9.25 265.2 10.44 312.4 12.30 378.0 14.88 409.7.13 444.5 17.5 558.8 22.00 660.4 26.00 76.2 3.00 79.5 3.13 95.3 3.75 109.5 4.31 1.7 4.75 128.0 5.04 171.5 6.75 190.5 7.50.9 0.98 32.8 1.29 39.6 1.56 35.6 1.40 40.1 1.58 39.1 1.54 76.2 3.00 63.5 2.50. 7 8 1 1 31.5 1. 36.6 1.44 41.4 1.63 46.5 1.83 58.7 2.31 75.9 2.99 85.1 3.35 92.2 3.63 99.8 3.93 113.3 4.46 130.3 5.13 154.4 6.08 158.8 6.25 1.7 7.94 2.3 8.83 54.1 2.13 60.2 2.37 65.8 2.59 75.2 2.96 94.0 3.70 94.7 3.73 1.1 4.57 129.0 5.08 5.3 0.21 6.1 0. 8.1 0.32 9.1 0.36 4.3 0.17-0.8-0.03 6.6 0.26 5.6 0.22 85.6 3.37 91.9 3.62 102.4 4.03 1.6 4.59 140.5 5.53 153.4 6.04 192.0 7.56 214.1 8.43 kg 9.1 12.2 27 22.2 49 30.4 67 37.2 82 60.8 134 113.4 250 170.1 375 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-133

EC Series QMPR Four-Bolt Pillow Blocks QMPR Four-Bolt Pillow Blocks Part QMPR13J060S QMPR13J7S QMPR13J8S QMPR13J065S QMPR15J211S QMPR15J212S QMPR15J070S QMPR15J215S QMPR15J300S QMPR15J075S QMPR18J303S QMPR18J304S QMPR18J080S QMPR18J085S QMPR18J307S QMPR18J308S QMPR18J090S 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 22213 22215 22218 A B C D m D max. E F G H J K L M R S Wt. 69.9 2.75 79.5 3.13 95.3 3.75 147.3 5.80 4.3 6.47 195.3 7.69 91.9 3.62 101.9 4.01 1.9 4.76 181.1 7.13 3.2 8.00 235.0 9.25 222.3 8.75 3.8 9.60 285.8 1 47.8 1.88 54.1 2.13 60.5 2.38 260.4 10.25 275.1 10.83 346.2 13.63 82.6 3.25 85.9 3.38 95.3 3.75.9 0.98 29.5 1. 39.6 1.56 31.5 1. 36.6 1.44 95.5 3.76 103.1 4.06 113.3 4.46 54.1 2.13 60.2 2.37 65.8 2.59 5.3 0.21 6.1 0. 8.1 0.32 85.6 3.37 91.9 3.62 102.4 4.03 kg 9.1 12.2 27 22.2 49 C-134 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

EC Series QMPH/QMPG Four-Bolt Pillow Blocks QMPH/QMPG Four-Bolt Pillow Blocks QMPH SAF Style Four-Bolt Pillow Block Dimensions Part QMPH26J125S QMPH26J415S QMPH26J500S QMPH26J130S QMPH30J507S QMPH30J508S QMPH30J140S QMPH30J515S QMPH30J600S QMPH30J150S QMPH34J607S QMPH34J608S QMPH34J170S QMPH34J615S QMPH34J700S QMPH34J180S 125 4 15 5 130 5 7 5 1 2 140 5 15 6 150 6 7 6 1 2 170 6 15 7 180 22226 23230 23230 23234 23234 A B C D m D max. E F G H J K L M R S Wt. 152.4 6.00 9.9 6.688 179.4 7.063 190.5 7.50 0.0 7.875 284 11.18 330.7 13.02 339.9 13.38 390.7 15.38 400.1 15.75 175 6.89 5.0 8.07 5.0 8.07 235.0 9.25 235.0 9.25 406.4.00 441.5 17.38 492.3 19.38 530.4.88 549.4 21.63 435.1 17.13 485.9 19.13 549.4 21.63 600.2 23.63 619.3.38 85.9 3.38 95.3 3.75 108.0 4.25 117.5 4.625 114.3 4.50 500.4 19.70 558.8 22.00 628.7.75 711.2 28.00 711.2 28.00 128 5.04 171.5 6.75 171.5 6.75 190.5 7.50 190.5 7.50 51.8 2.04 76.2 3.00 85.9 3.38 63.5 2.50 73.2 2.88 1 1 1 1 30 1 1 4 58.7 2.31 75.9 2.99 75.9 2.99 85.1 3.35 85.1 3.35 158.5 6. 199.1 7.84 1.7 7.94 2.3 8.83 2.3 8.83 94.5 3.72 1.1 4.57 1.1 4.57 129.0 5.08 129.0 5.08-0.7-0.028 5.1 0. 6.6 0.26 5.6 0.22 5.6 0.22 153.4 6.04 192.0 7.56 192.0 7.56 214.1 8.43 214.1 8.43 kg 60.8 134 113.4 250 113.4 250 170.1 375 170.1 375 QMPG SN Style Four-Bolt Pillow Block Dimensions Part QMPG26J125S QMPG26J415S QMPG26J500S QMPG26J130S QMPG30J507S QMPG30J508S QMPG30J140S QMPG30J515S QMPG30J600S QMPG30J150S QMPG34J607S QMPG34J608S QMPG34J170S QMPG34J615S QMPG34J700S QMPG34J180S 125 4 15 5 130 5 7 5 1 2 140 5 15 6 150 6 7 6 1 2 170 6 15 7 180 22226 23230 23234 23234 A B C D m D max. E F G H J K L M R S Wt. 150.0 5.906 170.0 6.693 190.5 7.50 0.0 7.875 281.4 11.08 332.2 13.08 390.7 15.38 400.1 15.75 175.0 6.89 5.0 8.07 235.0 9.25 235.0 9.25 384.3 15.13 438.2 17.25 530.4.88 549.4 21.63 447.8 17.63 482.6 19.00 600.2 23.63 619.3.38 80.0 3.15 89.9 3.54 117.5 4.625 114.3 4.50 500.1 19.69 547.6 21.65 711.2 28.00 711.2 28.00 128 5.04 171.5 6.75 190.5 7.50 190.5 7.50 49.3 1.94 76.2 3.00 63.5 2.50 73.2 2.88 1 1 1 30 1 1 4 58.7 2.31 75.9 2.99 85.1 3.35 85.1 3.35 158.5 6. 198.6 7.82 2.3 8.83 2.3 8.83 94.5 3.72 1.1 4.57 129.0 5.08 129.0 5.08-6.9-0.27 9.7 0.38 5.6 0.22 5.6 0.22 153.4 6.04 192.0 7.56 214.1 8.43 214.1 8.43 kg 60.8 134 113.4 250 170.1 375 170.1 375 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-135

EC Series QMPX 5000 SERIES Four-Bolt Pillow Blocks QMPX 5000 SERIES Four-Bolt Pillow Blocks Part QMPX13J060S 60 QMPX13J7S 2 7 QMPX13J8S 2 1 2 22213 QMPX13J065S 65 QMPX15J211S 2 11 QMPX15J212S 2 3 4 QMPX15J070S 70 QMPX15J215S 2 15 22215 QMPX15J300S 3 QMPX15J075S 75 QMPX18J303S 3 3 QMPX18J304S 3 1 4 QMPX18J080S 80 QMPX18J085S 85 22218 QMPX18J307S 3 7 QMPX18J308S 3 1 2 QMPX18J090S 90 QMPXJ311S 3 11 QMPXJ312S 3 3 4 QMPXJ315S 3 15 222 QMPXJ400S 4 QMPXJ100S 100 QMPX22J110S 110 QMPX22J407S 4 7 QMPX22J408S 4 1 2 22222 QMPX22J115S 115 QMPX26J125S 125 QMPX26J415S 4 15 QMPX26J500S 5 22226 QMPX26J130S 130 QMPX30J507S 5 7 QMPX30J508S 5 1 2 23230 QMPX30J140S 140 QMPX30J515S (1) 5 15 QMPX30J600S (1) 6 23230 QMPX30J150S (1) 150 QMPX34J607S (1) 6 7 QMPX34J608S (1) 6 1 2 QMPX34J170S (1) 170 QMPX34J615S (1) 6 15 23234 QMPX34J700S (1) 7 QMPX34J180S (1) 180 (1) No gussets on outside housing. A B C D m D max. E F G H J K L M R S Wt. 76.2 3.00 88.9 3.50 101.6 4.00 127.0 5.00 146.1 5.75 155.6 6.125 9.9 6.688 179.4 7.063 0.0 7.875 153.7 6.05 173.5 6.83 1.2 7.92 239.8 9.44 273.8 10.78 283.2 11.15 330.2 13.00 339.9 13.38 400.1 15.75 91.9 3.62 101.9 4.01 1.9 4.76 152.4 6.00 0.0 6.30 175.0 6.89 5.0 8.07 5.0 8.07 235.0 9.25 176.3 6.94 230.1 9.06 274.6 10.81 317.5 12.50 354.1 13.94 387.4 15.25 439.9 17.32 489.0 19.25 549.4 21.63 2.8 9.56 265.2 10.44 309.6 12.19 355.6 14.00 395.2 15.56 425.5.75 485.8 19.125 552.5 21.75 619.3.38 66.8 2.63 68.9 2.75 76.2 3.00 88.9 3.50 101.6 4.00 108.0 4.25 93.5 3.68 106.4 4.188 112.8 4.44 285.8 1 330.2 13.00 381.0 15.00 425.5.75 469.9 18.50 514.4.25 558.8 22.00 625.7.75 711.2 28.00 98.6 3.88 108.0 4.25 1.7 4.75 139.7 5.50 158.8 6.25 171.5 6.75 171.5 6.75 171.5 6.75 190.5 7.50 31.0 1.22 39.1 1.54 38.1 1.50 41.4 1.63 45.7 1.80 50.8 2.00 76.2 3.00 85.6 3.37 73.2 2.88 7 8 1 1 1 8 1 1 8 1 1 8 30 1 1 4 31.5 1. 36.6 1.44 41.4 1.63 46.5 1.83 58.7 2.31 75.9 2.99 75.9 2.99 80.1 3.35 103.4 4.07 114.3 4.50 126.0 4.96 145.3 5.72 171.2 6.74 180.3 7.10 1.7 7.94 196.9 7.75 2.3 8.83 54.1 2.13 60.2 2.37 65.8 2.59 75.2 2.96 94.0 3.70 94.5 3.72 1.1 4.57 1.1 4.57 129.0 5.08 5.3 0.21 7.1 0.28 8.1 0.32 8.6 0.34 2.3 0.09-1.5-0.06 6.6 0.26 4.8 0.19 5.6 0.22 85.6 3.37 91.9 3.62 102.4 4.03 1.6 4.59 140.5 5.53 153.4 6.04 192.0 7.56 192.0 7.56 214.1 8.43 kg 10.4 23 12.7 28 22.2 49 30.4 67 37.2 82 60.8 134 113.4 250 113.4 250 179.2 395 C-136 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

EC Series QMPXT 5000 SERIES Two-Bolt Pillow Blocks QMPXT 5000 SERIES Two-Bolt Pillow Blocks Part QMPXT13J060S QMPXT13J7S QMPXT13J8S QMPXT13J065S QMPXT15J211S QMPXT15J212S QMPXT15J070S QMPXT15J215S QMPXT15J300S QMPXT15J075S 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 22213 22215 A B C D m D max. F G H J K L M R S Wt. 76.2 3.00 88.9 3.50 153.7 6.05 173.7 6.84 91.9 3.62 101.9 4.01 194.6 7.66 230.1 9.06 223.0 8.78 265.2 10.44 285.8 1 330.2 13.00 73.7 2.90 75.7 2.98 35.1 1.38 35.1 1.38 7 8 31.5 1. 91.4 3.60 98.0 3.86 54.1 2.13 60.2 2.37 5.3 0.21 6.1 0. 85.6 3.37 91.9 3.62 kg 10.0 22 12.7 28 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-137

EC Series QMSN SN-STYLE Two-Bolt Pillow Blocks Pure Metric Design QMSN SN-STYLE Two-Bolt Pillow Blocks Pure Metric Design Part QMSN08J035S QMSN08J107S QMSN08J108S QMSN09J040S QMSN09J111S QMSN09J112S QMSN09J045S QMSN10J115S QMSN10J0S QMSN10J050S QMSN11J3S QMSN11J4S QMSN11J055S QMSN13J060S QMSN13J7S QMSN13J8S QMSN13J065S QMSN15J211S QMSN15J212S QMSN15J070S QMSN15J215S QMSN15J300S QMSN15J075S QMSN18J303S QMSN18J304S QMSN18J080S 35 1 7 1 1 2 40 1 11 1 3 4 45 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 228 229 22210 22211 22213 22215 22218 A B C D m D max. F G H J K L M R S Wt. 60 2.36 60 2.36 70 2.76 70 2.76 80 3.15 95 3.74 100 3.94 111 4.37 111 4.37 136 5.35 141 5.55 157 6.18 183 7. 0 7.87 60.5 2.38 67 2.64 70 2.76 76 2.99 92 3.62 102 4.02 121 4.76 159 6.26 159 6.26 183 7. 183 7. 196 7.72 1 9.49 279 10.98 175 6.89 175 6.89 2 8.50 2 8.50 235 9.25 279 10.98 292 11.50 5 8.07 5 8.07 254 10.00 254 10.00 275 10.83 3 12.44 345 13.58 62 2.44 62 2.44 68 2.68 68 2.68 74 2.91 76 2.99 86 3.39 35 1.38 35 1.38 25 0.98 25 0.98 35 1.38 34 1.34 39 1.54 12 1 2 12 1 2 25 25 0.98 25 0.98 29 1.14 31 1.22 32 1.26 37 1.46 75 2.95 79 3.11 82 3.23 85 3.35 91 3.58 98 3.86 109 4.29 44 1.75 48 1.89 48 1.89 51 2.01 55 2.17 60 2.36 66 2.60 5 0. 6 0. 9 0.35 6 0. 5 0. 6 0. 7 0.28 70 2.75 73 2.87 73 2.87 80 3.15 86 3.39 92 3.62 103 4.06 kg 10.5 23 10.5 23 12.7 28 13.2 29 15.9 35.9 46 25.5 56 Continued on next page. C-138 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

EC Series QMSN SN-STYLE Two-Bolt Pillow Blocks Pure Metric Design Continued from previous page. Part QMSN18J085S 85 22218 QMSN18J307S QMSN18J308S QMSN18J090S QMSNJ311S QMSNJ312S QMSNJ315S QMSNJ400S QMSNJ100S 3 7 3 1 2 90 3 11 3 3 4 3 15 4 100 22218 222 QMSN22J110S 110 22222 QMSN22J407S QMSN22J408S QMSN22J115S QMSN26J125S QMSN26J415S QMSN26J500S QMSN26J130S 4 7 4 1 2 115 125 4 15 5 130 22222 22226 A B C D m D max. F G H J K L M R S Wt. 112 4.41 112 4.41 125 4.92 140 5.51 150 5.91 150 5.91 212 8.35 212 8.35 1 9.49 255 10.04 265 10.43 282 11.10 121 4.76 121 4.76 152 5.98 0 6.30 0 6.30 175 6.89 279 10.98 290 11.42 319 12.56 332 13.07 367 14.45 402 15.83 292 11.50 327 12.87 366 14.41 365 14.37 400 15.75 435 17.13 345 13.58 380 14.96 410.14 410.14 445 17.52 500 19.69 86 3.39 86 3.39 101 3.98 105 4.13 105 4.13 113 4.45 39 1.54 39 1.54 50 1.97 39 1.54 49 1.93 49 1.93 7 8 7 8 7 8 7 8 30 1 1 4 37 1.46 37 1.46 41 1.61 47 1.85 47 1.85 58 2.28 109 4.29 109 4.29 126 4.96 147 5.79 147 5.79 151 5.94 66 2.60 66 2.60 75 2.95 94 3.70 94 3.70 95 3.74 7 0.28 7 0.28 9 0.35 6 0. 6 0. 2 0.08 103 4.06 103 4.06 1 4.57 141 5.55 141 5.55 153 6.02 kg 25.5 56 25.5 56 35.9 79 35.9 79 35.5 78 40.0 88 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-139

EC Series QMC Piloted Flange Cartridges QMC Piloted Flange Cartridges Part QMC08J035S 35 QMC08J107S 1 7 228 QMC08J108S 1 1 2 QMC09J040S 40 QMC09J111S 1 11 QMC09J112S 1 3 4 229 QMC09J045S 45 QMC10J115S 1 15 QMC10J0S 2 22210 QMC10J050S 50 QMC11J3S 2 3 QMC11J4S 2 1 4 22211 QMC11J055S 55 QMC13J060S 60 QMC13J7S 2 7 QMC13J8S 2 1 2 22213 QMC13J065S 65 QMC15J211S 2 11 QMC15J212S 2 3 4 QMC15J070S 70 QMC15J215S 2 15 22215 QMC15J300S 3 QMC15J075S 75 QMC18J303S 3 3 QMC18J304S 3 1 4 QMC18J080S 80 QMC18J085S 85 22218 QMC18J307S 3 7 QMC18J308S 3 1 2 QMC18J090S 90 QMCJ311S 3 11 QMCJ312S 3 3 4 QMCJ315S 3 15 222 QMCJ400S 4 QMCJ100S 100 QMC22J110S (2) 110 QMC22J407S (2) 4 7 QMC22J408S (2) 4 1 2 22222 QMC22J115S (2) 115 (1) Pilot tolerance: +0/-0.051 (+0/-0.002 ). (2) Six-bolt housing. B FIX 49.8 1.96 54.6 2.15 50.4 1.99 54.4 2.14 59.4 2.34 62.5 2.46 73.2 2.88 72.1 2.84 92.5 3.64 B EXP B.C. C D E F G (1) H J K 51.8 2.04 56.6 2.23 52.6 2.07 56.4 2.22 61.5 2.42 64.5 2.54 75.2 2.96 74.2 2.92 94.5 3.72 111.3 4.38 130.3 5.13 136.7 5.38 152.4 6.00 5.1 6.50 190.5 7.50 219.2 8.63 238.3 9.38 60.5 2.38 66.8 2.63 70.1 2.76 75.9 2.99 91.9 3.62 101.9 4.01 1.9 4.76 152.4 6.00 298.5 0.0 11.75 (2) 6.30 92.2 3.63 111.3 4.38 113.5 4.47 127.0 5.00 139.7 5.50 2.1 6.38 187.5 7.38 6.5 8.13 254.0 10.00 78.5 3.09 91.9 3.62 96.5 3.80 107.7 4. 1.8 4.60 134.6 5.30 154.9 6.10 8.4 6.63 133.4 5.25 155.7 6.13 2.1 6.38 185.4 7.30 193.8 7.63 222.3 8.75 262.6 10.34 276.4 10.88 149.4 342.9 5.88 (2) 13.50 92.1 3.625 108.0 4.250 114.3 4.500 127.0 5.000 139.7 5.500 1.9 6.375 187.3 7.375 6.4 8.125 260.4 10.250 12.7 0.50 12.7 0.50.0 0.63 14.7 0.58 17.5 0.69.6 0.81 10 7 10 7 10 7 12 1 2 12 1 2 28.7 1.13 31.5 1. 36.6 1.44 41.4 1.63 46.5 (2) 1.83 L FIX 73.7 2.90 77.0 3.03 77.5 3.05 83.1 3.27 87.9 3.46 94.5 3.72 106.4 4.19 126.0 4.96 140.7 5.54 L EXP M N R S Wt. 75.7 2.98 79.0 3.11 79.5 3.13 85.1 3.35 91.2 3.59 96.5 3.80 108.5 4.27 128.0 5.04 142.7 5.62 44.5 1.75 47.5 1.87 47.5 1.87 50.5 1.99 54.1 2.13 60.2 2.37 65.8 2.59 75.2 2.96 94.0 3.70 23.9 0.94 22.4 0.88 26.9 1.06 28.7 1.13 28.7 1.13 33.3 1.31 54.1 2.13 48.3 1.90 3.81 0.15 3.81 0.15 4.6 0.18 3.6 0.14 2.3 0.09 2.3 0.09 4.1 0. 9.4 0.37 0.3 0.01 69.9 2.75 72.9 2.87 72.9 2.87 79.2 3.12 85.6 3.37 91.9 3.62 102.4 4.03 115.8 4.56 140.5 5.53 kg 3.6 8 4.1 9 4.5 10 5.9 13 7.3 10.0 22 14.5 32 19.5 43 32.7 72 C-140 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

EC Series QMCW Piloted Flange Cartridges QMCW Piloted Flange Cartridges Part QMCW08J035S 35 QMCW08J107S 1 7 228 QMCW08J108S 1 1 2 QMCW09J040S 40 QMCW09J111S 1 11 QMCW09J112S 1 3 4 229 QMCW09J045S 45 QMCW10J115S 1 15 QMCW10J0S 2 22210 QMCW10J050S 50 QMCW11J3S 2 3 QMCW11J4S 2 1 4 22211 QMCW11J055S 55 QMCW13J060S 60 QMCW13J7S 2 7 QMCW13J8S 2 1 2 22213 QMCW13J065S 65 QMCW15J211S 2 11 QMCW15J212S 2 3 4 QMCW15J070S 70 QMCW15J215S 2 15 22215 QMCW15J300S 3 QMCW15J075S 75 QMCW18J303S 3 3 QMCW18J304S 3 1 4 QMCW18J080S 80 QMCW18J085S 85 22218 QMCW18J307S 3 7 QMCW18J308S 3 1 2 QMCW18J090S 90 (1) Pilot tolerance: +0/-0.05 (+0/-0.002 ). (2) Six-bolt housing. B FIX 38.6 1.53 38.9 1.53 39.1 1.54 45.7 1.80 47.5 1.87 46.0 1.81 62.5 2.46 B Exp B.C. C D E F G (1) H J K 40.9 1.61 40.1 1.58 41.1 1.62 47.8 1.88 49.5 1.95 48.0 1.89 64.5 2.54 111.3 4.38 130.3 5.13 136.7 5.38 152.4 6.00 5.1 6.50 190.5 7.50 219.2 8.63 59.9 2.36 66.8 2.63 70.1 2.76 75.9 2.99 91.9 3.62 101.9 4.01 1.9 4.76 92.2 3.63 111.3 4.38 113.5 4.47 127.0 5.00 139.7 5.50 2.1 6.38 187.5 7.38 78.5 3.09 91.9 3.62 96.5 3.80 107.7 4. 1.8 4.60 134.6 5.30 154.9 6.10 133.4 5.25 155.7 6.13 2.1 6.38 181.1 7.13 193.8 7.63 222.3 8.75 260.4 10.25 92.1 3.625 108.0 4.250 114.3 4.500 127.0 5.000 139.7 5.500 1.9 6.375 187.3 7.375 12.7 0.50 10.2 0.40 9.7 0.38 14.2 0.56 12.7 0.50 12.7 0.50 22.4 0.88 10 7 10 7 10 7 12 1 2 12 1 2 25.1 0.99.9 0.98 28.7 1.13 31.5 1. 36.6 1.44 L FIX 73.7 2.90 77.0 3.03 77.2 3.04 86.9 3.42 90.2 3.55 93.5 3.68 110.2 4.34 L EXP M N R S Wt. 75.7 2.98 78.2 3.08 79.2 3.12 88.9 3.50 92.2 3.63 95.5 3.76 112.3 4.42 44.5 1.75 47.8 1.88 48.0 1.89 50.5 1.99 54.1 2.13 60.2 2.37 65.8 2.59 35.1 1.38 38.1 1.50 38.1 1.50 41.4 1.63 42.9 1.69 47.8 1.88 47.8 1.88 3.8 0.15 4.1 0. 4.3 0.17 7.62 0.30 4.31 0.17 1.5 0.06 7.9 0.31 69.9 2.75 72.9 2.87 72.9 2.87 79.2 3.12 85.6 3.37 91.9 3.62 102.4 4.03 kg 3.6 8 4.1 9 4.5 10 5.9 13 7.3 10.0 22 14.5 32 Continued on next page. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-141

EC Series QMCW Piloted Flange Cartridges QMCW Piloted Flange Cartridges continued Continued from previous page. Part QMCWJ311S 3 11 QMCWJ312S 3 3 4 QMCWJ315S 3 15 222 QMCWJ400S 4 QMCWJ100S 100 QMCW22J110S (2) 110 QMCW22J407S (2) 4 7 QMCW22J408S (2) 4 1 2 22222 QMCW22J115S (2) 115 QMCW26J125S (2) 125 QMCW26J415S (2) 4 15 QMCW26J500S (2) 5 22226 QMCW26J130S (2) 130 QMCW30J507S (2) 5 7 QMCW30J508S (2) 5 1 2 23230 QMCW30J140S (2) 140 QMCW30J515S (2) 5 15 QMCW30J600S (2) 6 23230 QMCW30J150S (2) 150 QMCW34J607S (2) 6 7 QMCW34J608S (2) 6 1 2 QMCW34J170S (2) 170 QMCW34J615S (2) 6 15 23234 QMCW34J700S (2) 7 QMCW34J180S (2) 180 (1) Pilot tolerance: +0/-0.05 (+0/-0.002 ). (2) Six-bolt housing. B FIX 63.5 2.50 76.5 3.01 73.7 2.90 82.8 3.26 82.8 3.26 85.9 3.38 B Exp B.C. C D E F G (1) H J K 65.5 2.58 78.5 3.09 75.7 2.98 84.8 3.34 84.8 3.34 87.9 3.46 238.3 9.38 152.4 6.00 298.5 0.0 11.75 (2) 6.30 323.9 12.75 (2) 175.0 6.89 368.3 5.0 14.50 (2) 8.07 419.1 5.0.50 (2) 8.07 4 17.00 235.0 9.25 6.5 8.13 254.0 10.00 266.7 10.50 304.8 12.00 304.8 12.00 355.6 14.00 8.4 6.63 276.4 10.88 149.4 342.9 5.88 (2) 13.50 2.1 374.7 6.38 (2) 14.75 184.2 4 7.25 (2) 17.00 9.6 482.6 8.25 (2) 19.00 215.9 8.50 482.6 19.00 6.4 8.125 260.4 10.250 279.4 10 330.2 13.000 355.6 14.000 381.0 15.000 26.2 1.03 26.2 1.03 26.2 1.03 28.7 1.13 41.4 1.63 46.5 (2) 1.83 58.7 7 8 (2) 2.31 75.9 7 8 (2) 2.99 75.9 7 8 (2) 2.99 1 (2) 85.1 3.35 L FIX 1.7 4.75 144.8 5.70 151.4 5.96 4.2 8.04 211.3 8.32 2.2 8.51 L EXP M N R S Wt. 122.7 4.83 146.8 5.78 153.4 6.04 6.2 8.12 213.4 8.40 218.2 8.59 75.2 2.96 94.0 3.70 94.7 3.73 1.1 4.57 1.1 4.57 129.0 5.08 57.2 2.25 68.3 2.69 77.9 3.065 121.4 4.78 128.5 5.06 130.3 5.13 4.1 0. 4.3 0.17-1.8-0.07 12.2 0.48 19.3 0.76 2.0 0.08 1.6 4.59 140.5 5.53 153.4 6.04 192.0 7.56 192.0 7.56 214.1 8.43 kg 19.5 43 32.7 72 46.3 102 102.5 226 101.6 2 152.4 336 C-142 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

EC Series QMF Four-Bolt Square Flange Blocks QMF Four-Bolt Square Flange Blocks Part QMF08J035S QMF08J107S 35 1 7 228 QMF08J108S 1 1 2 228 QMF09J111S QMF09J040S QMF09J112S QMF09J045S QMF10J115S QMF10J0S QMF10J050S QMF11J3S QMF11J4S QMF11J055S QMF13J060S QMF13J7S QMF13J8S QMF13J065S QMF15J211S QMF15J212S QMF15J070S QMF15J215S QMF15J300S QMF15J075S QMF18J303S QMF18J304S QMF18J080S QMF18J085S QMF18J307S QMF18J308S QMF18J090S QMFJ311S QMFJ312S QMFJ315S QMFJ400S QMFJ100S QMF22J110S QMF22J407S QMF22J408S QMF22J115S 1 11 40 1 3 4 45 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 11 3 3 4 3 15 4 100 110 4 7 4 1 2 115 229 229 22210 22211 22213 22215 22218 222 22222 B.C. C D E F H J K 127.7 4.95 148.3 5.84 148.3 5.84 157.2 6.19 157.2 6.19 175.0 6.89 193.0 7.60 215.6 8.49 251.7 9.91 278.4 10.96 314.5 12.38 60.5 2.38 60.5 2.38 66.8 2.63 66.8 2.63 70.1 2.76 75.9 2.99 91.9 3.62 101.9 4.01 1.9 4.76 152.4 6.00 0.0 6.30 93.7 3.69 108.0 4.25 118.4 4.66 118.4 4.66 1.7 4.75 130.3 5.13 146.1 5.75 8.9 6.65 193.8 7.63 2.0 8.82 256.8 10.11 88.9 3.50 104.9 4.13 104.9 4.13 111.3 4.38 111.3 4.38 1.0 4.88 136.7 5.38 152.4 6.00 177.8 7.00 196.9 7.75 222.3 8.75 117.6 4.63 136.7 5.38 136.7 5.38 143.0 5.63 139.7 5.50 157.2 6.19 8.4 6.63 189.0 7.44 219.2 8.63 253.2 9.97 276.4 10.88 22.4 0.88 22.4 0.88 22.4 0.88 22.4 0.88 22.4 0.88 26.9 1.06 33.3 1.31 38.1 1.50 38.1 1.50 12 1 2 12 1 2 12 1 2 12 1 2 12 1 2 7 8 7 8.4 0.98 28.7 1.13 31.5 1. 36.6 1.44 41.4 1.63 46.5 1.83 L FIX 72.9 2.87 73.7 2.90 79.5 3.13 79.5 3.13 80.8 3.18 82.8 3.26 88.6 3.49 96.0 3.78 107.2 4.22 126.2 4.97 150.1 5.91 L EXP M N R S Wt. 74.9 2.95 75.7 2.98 81.5 3.21 81.5 3.21 82.8 3.26 84.8 3.34 90.7 3.57 98.0 3.86 109.2 4.30 128.3 5.05 152.1 5.99 44.5 1.75 44.5 1.75 47.8 1.88 47.8 1.88 48.0 1.89 50.5 1.99 54.1 2.13 60.2 2.37 66.8 2.59 75.2 2.96 94.0 3.70 57.2 2.25 59.4 2.34 63.5 2.50 63.5 2.50 65.0 2.56 66.8 2.63 72.4 2.85 76.2 3.00 84.1 3.31 103.1 4.06 106.9 4.21 3.0 0.12 3.8 0.15 6.4 0.25 6.4 0.25 7.9 0.31 3.3 0.13 3.0 0.12 4.1 0. 4.8 0.19 9.4 0.37 9.7 0.38 69.9 2.75 69.9 2.75 73.2 2.88 72.9 2.87 72.9 2.87 79.2 3.12 85.6 3.37 91.9 3.62 102.4 4.03 1.6 4.59 140.5 5.53 kg 4.5 10 4.5 10 5.0 11 5.0 11 5.0 11 6.4 14 7.7 17 10.4 23 15.9 35.9 55 28.6 63 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-143

EC Series QMFL Four-Bolt Square Flange Blocks QMFL Four-Bolt Square Flange Blocks Part QMFL08J035S QMFL08J107S QMFL08J108S QMFL09J111S QMFL09J040S QMFL09J112S QMFL09J045S QMFL10J115S QMFL10J0S QMFL10J050S QMFL11J3S QMFL11J4S QMFL11J055S QMFL13J060S QMFL13J7S QMFL13J8S QMFL13J065S QMFL15J211S QMFL15J212S QMFL15J070S QMFL15J215S QMFL15J300S QMFL15J075S QMFL18J303S QMFL18J304S QMFL18J080S QMFL18J085S QMFL18J307S QMFL18J308S QMFL18J090S QMFLJ311S QMFLJ312S QMFLJ315S QMFLJ400S QMFLJ100S 35 1 7 1 1 2 1 11 40 1 3 4 45 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 3 11 3 3 4 3 15 4 100 228 229 22210 22211 22213 22215 22218 222 B.C. C D E F G (1) (2) (3) H J K 127.0 5.00 139.7 5.50 146.1 5.75 2.1 6.38 171.5 6.75 0.2 7.88 1.3 9.50 273.1 10.75 60.5 2.38 66.8 2.63 70.1 2.76 76.0 2.99 91.9 3.62 101.9 4.01 1.9 4.76 152.4 6.00 93.7 3.69 118.4 4.66 115.3 4.54 130.3 5.13 146.1 5.75 8.4 6.63 193.8 7.63 229.6 9.04 89.9 3.54 98.8 3.89 103.4 4.07 114.3 4.50 121.2 4.77 141.2 5.56 170.7 6.72 193.0 7.60 117.6 4.63 136.7 5.38 1 5.19 149.4 5.88 157.2 6.19 182.6 7.19 212.9 8.38 1.3 9.50 N/A N/A N/A N/A N/A N/A 22.4 0.88 22.4 0.88 23.1 0.91 19.1 0.75 26.9 1.06 12 1 2 12 1 2 12 1 2 25.1 0.99.9 0.98 28.7 1.13 31.5 1. L FIX 72.9 2.87 79.5 3.13 80.8 3.18 83.3 3.28 88.9 3.50 95.8 3.77 L EXP M N R S Wt. (1) Pilot tolerance: +0/-0.05 (+0/-0.002 ). (2) Add (p) to the end of the housing designation in the part number to order with pilot using G dimension. (3) Piloted flange blocks will be quoted (price and delivery) upon request. For optional spigot on flange side, insert the letter P as seen in the following example: QMFP**J***S. 187.33 7.375 215.90 8.500 32.5 1.28 38.1 1.50 1 36.6 1.44 41.4 1.63 106.4 4.19 132.3 5.21 74.9 2.95 81.5 3.21 82.8 3.26 85.3 3.36 90.7 3.57 97.8 3.85 108.5 4.27 134.4 5.29 44.5 1.75 47.8 1.88 48.0 1.89 50.5 1.99 54.1 2.13 60.2 2.37 65.8 2.59 75.2 2.96 57.2 2.25 63.5 2.50 62.5 2.46 66.8 2.63 72.6 2.86 74.4 2.93 86.4 3.40 104.6 4.12 3.0 0.12 6.6 0.26 7.9 0.31 3.8 0.15 3.0 0.12 3.8 0.15 4.1 0. 15.7 0.62 69.9 2.75 72.9 2.87 72.9 2.87 79.2 3.12 85.6 3.37 91.9 3.62 102.4 4.03 1.6 4.59 kg 4.5 10 5.0 11 5.0 11 6.4 14 7.7 17 10.4 23 15.9 35.9 55 C-144 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

EC Series QMFY Round Flange Blocks QMFY Round Flange Blocks Part QMFY08J035S (4) QMFY08J107S (4) QMFY08J108S (4) QMFY09J040S QMFY09J111S QMFY09J112S QMFY09J045S QMFY10J115S QMFY10J0S QMFY10J050S QMFY11J3S QMFY11J4S QMFY11J055S QMFY13J060S QMFY13J7S QMFY13J8S QMFY13J065S QMFY15J211S QMFY15J212S QMFY15J070S QMFY15J215S QMFY15J300S QMFY15J075S 35 1 7 1 1 2 40 1 11 1 3 4 45 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 228 229 22210 22211 22213 22215 B.C. C D E F G (1) (2) (3) H J K 127.0 60.5 5.00 (4) 2.38 139.7 5.50 146.1 5.75 2.1 6.38 171.5 6.75 199.9 7.87 66.8 2.63 70.1 2.76 75.9 2.99 91.9 3.62 101.9 4.01 108.0 4.25 104.9 4.13 115.3 4.54 130.3 5.13 146.1 5.75 8.4 6.63 88.9 158.8 3.54 (4) 6.25 98.8 3.89 103.4 4.07 114.3 4.50 121.2 4.77 141.2 5.56 171.5 6.75 177.8 7.00 196.9 7.75 6.5 8.13 1.3 9.50 90.50 3.563 103. 4.063 111.13 4.375 127.00 5.000 138.13 5.438 0.35 6.313 19.1 0.75.6 0.81 19.1 0.75 19.1 0.75 12 1 2 (4) (1)Pilot tolerance: +0/-0.05 (+0/-0.002 ). (2) Add (p) to the end of the housing designation in the part number to order with pilot using G dimension. (3) Piloted flange blocks will be quoted (price and delivery) upon request. For optional spigot on flange side, insert the letter P as seen in the following example: QMFP**J***S. (4) Three-bolt housing. (5) Six-bolt housing. NOTE: Housings also are available with a 3 machined pilot. Please contact your Timken engineer for more information. 23.9 0.94 23.9 0.94 12 1 2 12 1 2 25.1 0.99.9 0.98 28.7 1.13 31.5 1. L FIX 73.2 2.88 76.2 3.00 75.9 2.99 82.3 3. 88.1 3.47 98.6 3.88 L EXP M N R S Wt. 75.2 2.96 78.2 3.08 78.0 3.07 84.3 3.32 90.4 3.56 100.6 3.96 44.5 1.75 47.8 1.88 48.0 1.89 75.9 2.99 54.1 2.13 60.2 2.37 57.4 2.26 60.5 2.38 58.4 2.30 62.0 2.44 72.4 2.85 76.2 3.00 3.3 0.13 3.0 0.12 3.0 0.12 3.0 0.12 2.3 0.09 6.4 0.25 69.9 2.75 72.9 2.87 72.9 2.87 79.2 3.12 85.6 3.37 91.9 3.62 kg 4.5 10 5.0 11 5.4 12 6.8 15 8.6 19 12.7 28 Continued on next page. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-145

EC Series QMFY Round Flange Blocks QMFY Round Flange Blocks continued Continued from previous page. Part QMFY18J303S QMFY18J304S QMFY18J080S QMFY18J085S QMFY18J307S QMFY18J308S QMFY18J090S QMFYJ311S QMFYJ312S QMFYJ315S QMFYJ400S QMFYJ100S QMFY22J110S (5) QMFY22J407S (5) QMFY22J408S (5) QMFY22J115S (5) QMFY26J125S (5) QMFY26J415S (5) QMFY26J500S (5) QMFY26J130S (5) 3 3 3 1 4 80 85 3 7 3 1 2 90 3 11 3 3 4 3 15 4 100 110 4 7 4 1 2 115 125 4 15 5 130 22218 222 22222 22226 B.C. C D E F G (1) (2) (3) H J K 1.3 9.50 273.1 10.75 1.9 4.76 152.4 6.00 327.2 0.0 12.88 (5) 6.30 355.6 175.0 14.00 (5) 6.89 193.8 7.63 212.9 8.38 254.0 10.00 284.2 11.19 170.7 6.72 193.0 7.60 282.7 11.13 3.8 12.63 3.6 384.3 6.44 (5) 15.13 177.8 419.1 7.00 (5).50 N/A N/A N/A N/A 28.7 1.13 28.7 1.13 38.1 1.50 7 8 1 36.6 1.44 41.4 1.63 46.5 1 (5) 1.83 58.7 1 1 8 (5) 2.31 L FIX 108.7 4.28 123.7 4.87 143.5 5.65 L EXP M N R S Wt. (1) Pilot tolerance: +0/-0.05 (+0/-0.002 ). (2) Add (p) to the end of the housing designation in the part number to order with pilot using G dimension. (3) Piloted flange blocks will be quoted (price and delivery) upon request. For optional spigot on flange side, insert the letter P as seen in the following example: QMFP**J***S. (4) Three-bolt housing. (5) Six-bolt housing. NOTE: Housings also are available with a 3 machined pilot. Please contact your Timken engineer for more information. 170.2 6.70 110.7 4.36 125.7 4.95 145.5 5.73 172.2 6.78 65.8 2.59 75.2 2.96 94.0 3.70 94.7 3.73 85.3 3.36 96.8 3.81 100.3 3.95 138.4 5.45 6.4 0.25 6.9 0.27 3.0 0.12.8 0.66 102.4 4.03 1.6 4.59 140.5 5.53 153.4 6.04 kg 19.1 42 29.9 66 46.3 102 52.2 115 C-146 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

EC Series QMFX 5000 SERIES Square Flange Blocks QMFX 5000 SERIES Square Flange Blocks Part QMFX08J035S QMFX08J107S 35 1 7 228 QMFX08J108S 1 1 2 228 QMFX09J040S QMFX09J111S QMFX09J112S QMFX09J045S QMFX10J115S QMFX10J0S QMFX10J050S QMFX11J3S QMFX11J4S QMFX11J055S QMFX13J060S QMFX13J7S QMFX13J8S QMFX13J065S QMFX15J211S QMFX15J212S QMFX15J070S QMFX15J215S QMFX15J300S QMFX15J075S 40 1 11 1 3 4 45 1 15 2 50 2 3 2 1 4 55 60 2 7 2 1 2 65 2 11 2 3 4 70 2 15 3 75 229 22210 22211 22213 22215 B.C. C D E F G (1) (2) (3) H J K 133.6 5.26 139.7 5.50 139.7 5.50 146.1 5.75 1.5 6.36 180.8 7.12 215.9 8.50 59.9 2.36 59.9 2.36 66.8 2.63 70.1 2.76 75.9 2.99 91.9 3.62 102.1 4.02 93.7 3.69 108.0 4.25 108.0 4.25 1.7 4.75 130.3 5.13 146.1 5.75 8.9 6.65 94.5 3.72 98.8 3.89 98.8 3.89 103.1 4.06 114.3 4.50 127.8 5.03 152.7 6.01 117.6 4.63 130.3 5.13 130.3 5.13 134.9 5.31 149.4 5.88 157.2 6.19 189.0 7.44 90.50 3.563 103. 4.063 103. 4.063 111.13 4.375 127.00 5.000 138.13 5.438 0.35 6.313 22.1 0.88 22.1 0.88 (1) Pilot tolerance: +0/-0.05 (+0/-0.002 ). (2) Add (p) to the end of the housing designation in the part number to order with pilot using G dimension. (3) Piloted flange blocks will be quoted (price and delivery) upon request. For optional spigot on flange side, insert the letter P as seen in the following example: QMFP**J***S. (4) Six-bolt round housing. 22.1 0.88 22.1 0.88 26.9 1.06 12 1 2 12 1 2 12 1 2 12 1 2 25.1 0.99.9 0.98 28.7 1.13 31.5 1. L FIX 72.9 2.87 73.7 2.90 79.5 3.13 80.8 3.18 83.1 3.27 89.2 3.51 96.0 3.78 L EXP M N R S Wt. 74.9 2.95 75.7 2.98 81.5 3.21 82.8 3.26 85.1 3.35 91.2 3.59 98.0 3.86 44.5 1.75 44.5 1.75 47.8 1.88 48.0 1.89 50.5 1.99 54.1 2.13 60.2 2.37 57.2 2.25 59.4 2.34 63.5 2.50 65.0 2.56 66.8 2.63 72.4 2.85 76.2 3.00 3.0 0.12 3.81 0.15 6.4 0.25 7.9 0.31 3.3 0.13 3.0 0.12 4.1 0. 69.9 2.75 69.9 2.75 72.9 2.87 72.9 2.87 79.2 3.12 85.6 3.37 91.9 3.62 kg 4.5 10 4.5 10 5.0 11 5.0 11 5.0 11 6.4 14 7.7 17 Continued on next page. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-147

EC Series QMFX 5000 SERIES Square Flange Blocks QMFX 5000 SERIES Square Flange Blocks continued Continued from previous page. Part QMFX18J303S QMFX18J304S QMFX18J080S QMFX18J085S QMFX18J307S QMFX18J308S QMFX18J090S QMFXJ311S QMFXJ312S QMFXJ315S QMFXJ400S QMFXJ100S QMFX22J110S (4) QMFX22J407S (4) QMFX22J408S (4) QMFX22J115S (4) QMFX26J125S (4) QMFX26J415S (4) QMFX26J500S (4) QMFX26J130S (4) 3 3 3 1 4 80 85 3 7 3 1 2 90 3 11 3 3 4 3 15 4 100 110 4 7 4 1 2 115 125 4 15 5 130 22218 222 22222 22226 B.C. C D E F G (1) (2) (3) H J K 1.3 9.50 298.5 11.75 1.9 4.76 152.4 6.00 327.2 0.0 12.88 (1) 6.30 355.6 175.0 14.00 (1) 6.89 193.8 7.63 215.9 8.50 256.5 10.10 284.2 11.19 170.7 6.72 211.1 8.31 212.9 8.38 268.2 10.56 3.6 384.3 6.44 (1) 15.13 177.8 419.1 7.00 (1).50 187.33 7.375 23 8.875 263.53 10.375 284.18 11.188 33.3 1.31 38.1 1.50 38.1 1.50 7 8 36.6 1.44 41.4 1.63 46.5 1 (1) 1.83 58.7 1 1 8 (1) 2.31 L FIX 107.2 4.22 126.0 4.96 143.8 5.66 L EXP M N R S Wt. (1) Pilot tolerance: +0/-0.05 (+0/-0.002 ). (2) Add (p) to the end of the housing designation in the part number to order with pilot using G dimension. (3) Piloted flange blocks will be quoted (price and delivery) upon request. For optional spigot on flange side, insert the letter P as seen in the following example: QMFP**J***S. (4) Six-bolt round housing. 172.2 6.78 109.2 4.30 128.0 5.04 145.8 5.74 174.2 6.86 65.8 2.59 75.2 2.96 94.0 3.70 94.7 3.73 84.1 3.31 103.1 4.06 106.9 4.21 135.1 5.32 4.8 0.19 9.4 0.37 3.3 0.13 17.3 0.68 102.4 4.03 1.8 4.60 140.5 5.53 153.4 6.04 kg 10.4 23 15.9 35 46.3 102 52.2 115 C-148 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

EC Series QMTu Take-up Blocks QMTU Take-Up Blocks Part QMTU10J115S 1 15 QMTU10J0S 2 22210 QMTU10J050S 50 QMTU11J3S 2 3 QMTU11J4S 2 1 4 22211 QMTU11J055S 55 QMTU13J060S 60 QMTU13J7S 2 7 QMTU13J8S 2 1 2 22213 QMTU13J065S 65 QMTU15J211S 2 11 QMTU15J212S 2 3 4 QMTU15J070S 70 QMTU15J215S 2 15 22215 QMTU15J300S 3 QMTU15J075S 75 QMTU18J303S 3 3 QMTU18J304S 3 1 4 QMTU18J080S 80 QMTU18J085S 85 22218 QMTU18J307S 3 7 QMTU18J308S 3 1 2 QMTU18J090S 90 QMTUJ311S 3 11 QMTUJ312S 3 3 4 QMTUJ315S 3 15 222 QMTUJ400S 4 QMTUJ100S 100 QMTU22J110S 110 QMTU22J407S 4 7 QMTU22J408S 4 1 2 22222 QMTU22J115S 115 QMTU26J125S 125 QMTU26J415S 4 15 QMTU26J500S 5 22226 QMTU26J130S 130 NOTE: Please refer to page C-9 for take-up frames. A C D E F G J K L M N P S Wt. 54.1 2.13 60.5 2.38 69.9 2.75 76.2 3.00 92.2 3.63 104.9 4.13 128.5 5.06 134.9 5.31 19.1 0.75 19.1 0.75 22.4 0.88 28.7 1.13 38.1 1.50 63.5 2.50 1.7 4.75 133.4 5.25 149.4 5.88 171.5 6.75 193.8 7.63 239.8 9.44 263.7 10.38 285.8 1 101.6 4.00 114.3 4.50 130.3 5.13 150.9 5.94 173.0 6.81 219.2 8.63 1.3 9.50 260.4 10.25 26.9 1.06 30.2 1.19 33.3 1.31 39.6 1.56 46.0 1.81 54.1 2.13 54.1 2.13 63.5 2.50 26.9 1.06 30.2 1.19 33.3 1.31 39.6 1.56 47.8 1.88 52.3 2.06 54.1 2.13 60.5 2.38 73.2 2.88 88.9 3.50 95.3 3.75 108.0 4.25 1.0 4.88 143.0 5.63 2.1 6.38 177.8 7.00.9 0.98 28.7 1.13 31.5 1. 36.6 1.44 41.4 1.63 46.5 1.83 58.7 2.31 153.4 6.04 7.9 6.61 193.8 7.63 219.7 8.65 257.0 10.12 296.9 11.69 341.4 13.44 396.7 15.62 48.0 1.89 50.5 1.99 54.1 2.13 60.2 2.37 65.8 2.59 75.4 2.97 94.0 3.70 94.7 3.73 76.7 3.02 82.8 3.26 90.7 3.57 97.0 3.82 106.4 4.19 1.4 4.74 143.8 5.66 151.1 5.95 88.9 3.50 95.3 3.75 1.7 4.75 1.7 4.75 158.8 6.25 177.8 7.00 199.9 7.87 228.6 9.00 17.5 0.69.6 0.81 26.9 1.06 46.0 1.81 46.0 1.81 52.3 2.06 52.3 2.06 52.3 2.06 kg 7.7 17 9.5 21 12.2 27 15.9 35.0 44 26.3 58 36.4 80 60.8 134 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-149

EC Series QMMC Cartridge Blocks QMMC Cartridge Blocks Part QMMC10J115S QMMC10J0S QMMC10J050S QMMC11J3S QMMC11J4S 1 15 2 50 2 3 2 1 4 22210 22211 A B C D F G K 13.5 0.53 13.5 0.53 23.1 0.91 23.1 0.91 70.1 2.76 75.9 2.99 QMMC11J055S 55 QMMC13J060S (1) 60 QMMC13J7S (1) 2 7 13.5 23.1 91.9 22213 QMMC13J8S (1) 2 1 2 0.53 0.91 3.62 QMMC13J065S (1) 65 QMMC15J211S 2 11 QMMC15J212S 2 3 4 QMMC15J070S 70 15.0 26.2 101.9 22215 QMMC15J215S 2 15 0.59 1.03 4.01 QMMC15J300S 3 QMMC15J075S 75 QMMC18J303S 3 3 QMMC18J304S 3 1 4 QMMC18J080S 80 15.0 26.9 1.9 QMMC18J085S 85 22218 0.59 1.06 4.76 QMMC18J307S 3 7 QMMC18J308S 3 1 2 QMMC18J090S 90 QMMCJ311S 3 11 QMMCJ312S 3 3 4 19.8 32.5 152.4 QMMCJ315S 3 15 222 0.78 1.28 6.00 QMMCJ400S 4 QMMCJ100S 100 (1) The grub screw is located in the external housing nut to secure to the housing. 4.8 0.19 4.8 0.19 4.8 0.19 6.4 0.25 5.8 0.23 7.9 0.31 104.78 (+0/-0.05) 4.125 (+0/-0.002) 115.09 (+0/-0.05) 4.531 (+0/-0.002) 127.00 (+0/-0.05) 5.000 (+0/-0.002) 149.225 (+0/-0.05) 5.875 (+0/-0.002) 171.45 (+0/-0.05) 6.750 (+0/-0.002) 6.375 (+0/-0.05) 8.125 (+0/-0.002) 62.2 2.45 65.5 2.58 69.3 2.73 79.8 3.14 87.6 3.45 105.2 4.14.9 0.98 28.7 1.13 31.5 1. 36.6 1.44 41.4 1.63 L FIX 79.2 3.12 83.6 3.29 85.6 3.37 100.1 3.94 109.7 4.32 128.0 5.039 L EXP M R S Wt. 81.3 3. 85.6 3.37 87.6 3.45 102.1 4.02 111.8 4.40 130.0 5.12 48.0 1.89 50.5 1.99 54.1 2.13 60.2 2.37 65.0 2.56 75.2 2.96 6.1 0. 4.1 0. 0.0 0.00 8.1 0.32 7.4 0.29 11.4 0.45 72.9 2.87 79.2 3.12 85.6 3.37 91.9 3.62 102.4 4.03 1.6 4.59 kg 3.6 8 4.5 10 5.4 12 8.2 18 11.8 26 14.5 32 Continued on next page. C-150 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

EC Series QMMC Cartridge Blocks Continued from previous page. Part QMMC22J110S QMMC22J407S QMMC22J408S QMMC22J115S QMMC26J125S QMMC26J415S QMMC26J500S QMMC26J130S QMMC30J507S QMMC30J508S QMMC30J140S QMMC30J515S QMMC30J600S 110 4 7 4 1 2 115 125 4 15 5 130 5 7 5 1 2 140 5 15 6 22222 22226 23230 23230 A B C D F G K 19.8 0.78 19.8 0.78 19.8 0.78 19.8 0.78 38.1 1.50 38.1 1.50 38.1 1.50 38.1 1.50 0.0 6.30 175.0 6.89 5.0 8.07 5.0 8.07 QMMC30J150S 150 QMMC34J607S 6 7 QMMC34J608S 6 1 2 QMMC34J170S 170 19.8 38.1 235.0 23234 QMMC34J615S 6 15 0.78 1.50 9.25 QMMC34J700S 7 QMMC34J180S 180 (1) The grub screw is located in the external housing nut to secure to the housing. 7.9 0.31 7.9 0.31 5.6 0.22 5.6 0.22 5.6 0.22 222.25 (+0/-0.08) 8.75 (+0/-0.003) 265.13 (+0/-0.08) 10.438 (+0/-0.003) 292.10 (+0/-0.08) 11.500 (+0/-0.003) 311.15 (+0/-0.08) 12.250 (+0/-0.003) 344.50 (+0/-0.08) 13.563 (+0/-0.003) 108.5 4.27 141.7 5.58 154.4 6.08 154.4 6.08 181.1 7.13 46.5 1.83 58.7 2.31 75.9 2.99 75.9 2.99 85.1 3.35 L FIX 148.0 5.83 5.4 6.51 188.2 7.41 188.2 7.41 219.5 8.64 L EXP M R S Wt. 150.1 5.91 7.4 6.59 190.2 7.49 190.2 7.49 221.5 8.72 94.0 3.70 94.7 3.73 1.1 4.57 1.1 4.57 129.0 5.08 7.6 0.30 11.9 0.47-3.8-0.15-3.8-0.15 5.33 0.21 140.5 5.53 153.4 6.04 192.0 7.56 192.0 7.56 214.1 8.43 kg 18.1 40 70 88.0 194 87.1 192 155.6 343 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-151

EC Series QMMH Hanger Blocks QMMH Hanger Blocks Part QMMH15J211S QMMH15J212S QMMH15J070S QMMH15J215S QMMH15J300S QMMH15J075S QMMH18J303S QMMH18J304S QMMH18J080S QMMH18J085S QMMH18J307S QMMH18J308S QMMH18J090S 2 11 2 3 4 70 2 15 3 75 3 3 3 1 4 80 85 3 7 3 1 2 90 22215 22218 A B C D E F G J K L M R S Wt. 1 5.19 0.3 6.31 21.3 8.38 260.4 10.25 101.9 4.01 1.9 4.76 2.1 6.38 0.2 7.88 50.8 2.00 63.5 2.50 50.8 2.00 76.2 3.00 69.9 2.75 76.2 3.00 1-8UNC 1 1 4-7UNC 36.6 1.44 91.9 3.62 99.3 3.91 60.2 2.37 65.8 2.59 0.0 0.00 3.0 0.12 91.9 3.62 102.4 4.03 kg 10.0 22.3 36 C-152 TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com

TA/DV series TA/DV Series The TA and DV series feature a 2300-series tapered adapter sleeve for increased shaft contact. This design offers the best shaft concentricity and highest capacity all the while having the ability to accoodate undersized shafting. TA Series TA series housed unit bearings are a direct drop-in replacement for SAF/SN split-cap housing dimensions. DV Series DV series housed units are a drop-in replacement for coon American set screw mounted units. You Have Choices For the TA and DV series, you can select from many seal options and housing styles, which are shown on page C-154. Housings Two-bolt pillow blocks. Four-bolt pillow blocks. Flange blocks. Piloted flange cartridges. Cartridge blocks. Seals Labyrinth: DuPont Teflon (T). Triple-lip: nitrile rubber (M), urethane (O) and DuPont Viton (N). Double-lip: nitrile rubber (B) and DuPont Viton (C). Steel and urethane closed-end covers (CS). Steel and urethane open-end covers (CK) with: DuPont Teflon (T). Triple-lip seal (DR). V-ring seal (VR). Fig. C-46. TA/DV series taper adapter insert. TIMKEN Spherical Roller Solid-Block Housed Units Download 3D Models and 2D Drawings at cad.timken.com C-153