Conserving Energy Since 1946 VFM Technical Data. Vortex Flowmeter

Conserving Energy Since 1946 VFM 7000 Technical Data Vortex Flowmeter

Measuring Principle The Vortex flowmeter is used for measuring the flow velocity of fluids in pipelines. The measuring principle is based on the development of a Karman Vortex shedding street in the wake of body built into the pipeline. The periodic shedding occurs first from one side and then from the other side of a bluff body (Vortexshedding body) installed perpendicular to the axis. Vortex shedding generates a so-called "Karman Vortex Street" with alternating pressure conditions whose frequency f is proportional to the flow velocity v. The non dimensional Strouhal number S (primary head constant) describes the relationship between the vortex shedding frequency f(in Hz), width b of the body and the mean flow velocity v (in m/s). f = S. v / b The flexural vibration of the vortex-shedding body is picked up in the primary head via sensors and analysed in the signal converter. Karman Vortex Street v b b The ultimate application specific flowmeter Forbes Marshall Vortex flowmeters operate on the Karman Vortex shedding street principle to measure the volumetric flowrate of gases, steam and liquids. The VFM 7000 unit consists of a VFS 7000(I) primary head and a VFC 090 flow converter with application specific software for various applications. Features PTB Certificate No. Ex-01 E.2067 conforms to Ex de[ib] IIC T6...T2 and EEx d[ib] IIC T6...T2 No mechanically moving parts High measuring accuracy Wafer/sandwich type DN 25 to 150 (1" to 6") Meter sizes flanged DN 10S to 200 (/8"S to 8") Small sizes DN 10S to 20 (/8"S to /4") with integral U/S and D/S pipes and flanges Compact unit, maintenance-free Microprocessor based digital signal converter using SMD technology Powerful LCD display with excellent readability Integrated volume/mass totalizers Full programmable parameters like flow range, engg. units, medium constants, current/frequency outputs Flameproof CSA Number 20449 for Explosion Proof Class 1 Zone 1 II C Class 1 Division 2 Group A, B, C&D F M approval - pending Conforms to CE Mark as per EMC Directive, LVD and PED Built-in self diagnostics Wetted parts of SS 16L/04 and Titanium High rangeability/turn-down ratio Simple programming and user-friendly interface Current and frequency outputs as standard features. RS22/485 digital communication can be optionally provided in lieu of frequency output External programming with magnetic sensors and bar magnet without having to open the cover of the electronic housing Online temperature/pressure compensation and mass flow computation with built-in temperature and pressure sensors Special application specific software for FAD, Natural Gas, Steam Metering, Condensate Metering, Gas flow Metering, Heat Metering and Net Heat Metering (ref. pg.14) Notch filter algorithm for estimating accurate frequency or vortex shedding 1

Application For flow velocities up to 22.97 ft/s for liquids and 246 ft/s for gases. Specially developed for Steam Flow Measurement/Gas Flow Metering/Natural Gas Flow Metering applications. Measurement of low conductive liquids. Automatic Density Correction can give flow rates in lbs/hr for steam and scfm of gases with standard online temperature compensation and optional pressure compensation. Windows based sizing software can be provided on request for speedy choice to give you: Correct size Minimum and maximum flow rates The turndown The pressure loss Overall pressure loss in pipe by calculating pressure drop in expander/reducer and straight sections Options VFM 7000 K - Compact system, signal converter is mounted on the primary head. F - Separated system, signal converter is mounted away from the primary head, primary head with connection box max. distance 2.8 ft (10 m). 2

Technical Data Flowmeter Primary Head/Sensor VFS 7000(I) Versions and meter sizes Pressure ratings see Table "Dimensions" on page 10 (Note the operating limits to DIN 2401 and ANSI B 16.5) Wafer/sandwich design to... DIN 19205 DN 25 to 150 ANSI 1" to 6" Flange connections to... DIN 2501 DN 10S to 200 ANSI B 16.5 /8"S to 8" Groove joint to... (optional) DIN 2512 DN 25 to 150 ANSI Other process connections 1" to 6" JIS and other standards on request Product and ambient temperature Hazardous duty versions Accuracies Operating volumetric flow (Reynolds Number>20000) Measuring error Standardized/Normalized volumetric & mass flow (Reynolds Number>20000) Measuring error Repeatability Product Temperature error See Diagram III on page 5 CMRI, PTB, CSA approvals (see page 1) FM approval is pending ±1% of measured value for DN 25 to 200 and ANSI 1" to 8" ± 2% of measured value for DN 10S to 20, ANSI /8"S to /4" ± 1.5% of measured value for DN 25 to 200 and ANSI 1" to 8" ± 2.5% of measured value for DN 10S to 20 and ANSI /8"S to /4" ± 0.5% of measured value Compensated by software only Materials SR.NO DESCRIPTION MATERIAL REMARKS 1 Housing Stainless Steel, A51 CFM (16L) Up to size DN 100/4" Stainless Steel, A51 CF8M (04) From DN 150/6" to DN 200/8" 2 Vortex shedding body Unalloyed Titanium (No..705) as standard Seals for Damper Pin a. b. c. Up to 56º F ( 180ºC) Up to 428 ºF ( 220ºC) Up to 464º F ( 240ºC) Viton O ring Kalrez 4079 O ring Parofluor O ring Non steam applications Non steam applications Steam applications 4 Bluff body metal seal C ring Inconel Ni plated Once used metal C ring should not be used again. Tightening torques for new seals are M6= 1.5 kg-m M8= 2 kg-m M10= 5.5 kg-m 5 Upstream & Downstream Straight Carbon steel (sch 40) Black powder coated pipes for wafer/sandwich units only Stainless Steel SS04/SS16 Shot blast finished (optional but recommended) 6 Locating pipe flanges Carbon steel for wafer/sandwich units (optional) Stainless Steel SS04/SS16 7 Gaskets (supplied as a Gasket, style AF-19, Non Asbestos standard accessory for both Gasket, style AF-160, Non Asbestos Any one as per application wafer and flanged units) Gasket, Teflon (PTFE)

Pressure loss p Diagram I Diagram II Pressure loss p for air 1.01 bar (14.69 psi) and 2ºF (0ºC) Pressure loss p for water 68ºF (20ºC) and ρn = 62.1 lbs/ft and ρn = 0.081 lbs/ft (1.29 kg/m ) (998.2 kg/m ) p (psig) p(mbar) p (psig) p(mbar) 1.45 1.02 0.7 0.44.29.15.10 0.07 0.044 0.029 0.015 0.010 0.0 07 0.0044 0.0029 0.0015 1 A B C D E F G H I J K 2 5 7 10 2 5 7 100 2 5 71000 2 7 100 5 2 10 7 5 2 1 7 5 2 0.1 5 7 10000 m/h US GPM 62 1 2 5 7 10 2 5 7 100 2 5 7 1000 2 5 7 10000 14.50 10.15 7.25 4.5 2.90 1.45 1.02 0.7 0.44 0.29 0.15 0.10 0.07 0.044 0.029 0.015 0 A B C D E F G H I J K 2 5 7 1 2 5 7 10 2 5 7 100 2 5 7 1000 m/h US GPM 44 1 2 5 7 10 2 5 7 100 2 5 7 1000 2 5 7 7 1000 5 2 100 7 5 2 10 7 5 2 4

Diagram III T u ºC (ºF) 60 (140) 40 (104) 0 (86) 20 (68) T T u m Ambient temperature Product temperature Standard version High-temperature version Hazardous duty version 0 (2) -20-25 (-.99) (-1) -20 0 50 100 140 180 220 240 T m ºC (ºF) (-.99) (2) (122) (212) (284) (56) (428) (464) Diagram IV Min. flow velocity at various densities for gases and saturated steam 10 100 Velocity Vmin in m/s 1 Velocity Vmin in m/s 10 1 A B C D 0.1 0.1 0.1 1 10 100 0.1 1 10 100 Density kg/m Density kg/m DN 25(1 ) to DN 200(8 ) DN 10S(/8 S) to DN 20(/4 ) 100 100 Velocity (ft/s) 10 1 Velocity(ft/s) 10 1 A B C D 0.1 0.01 0.1 1 10 Density (lbs/ft ) DN 25(1 ) to DN 200(8 ) 0.1 0.01 0.10 1.00 10.00 Density (lbs/ft ) DN 10S(/8 S) to DN 20(/4 ) Curve Meter size A DN 10S/ /8"S B DN 10/ /8" C DN 15/ 1/2" D DN 20/ /4" 5

Singal Converter VFC 090 Full scale range Power Supply Power Consumption Ambient temperature Tu Local display Display functions Programmable in liters, m, US/UK gallons, kg, tons, lbs, cub.ft.or standard flowrate per second, minute or hour 240/220/200/120/110/100 V AC +10% } -15% 20VAC +6% 48 to 6 Hz -10% AC: 15 VA See Diagram III, page 5 -field back-lit LCD Actual flowrate and sum totalizer (8-digit), each programmable for continuous or sequential display of measured parameters and error messages Display units Actual flowrate Units list as per full scale range or percentage of full scale independently programmed Totalizer liters, m, US/UK gallon, kg, tons, lbs, cub. ft. Language of plain texts German, English, French Display st 1 field (top) 8-digit, 7-segment numeric display, symbols for key acknowledgement nd 2 field (middle) 10-character, 14-segment text display rd field (bottom) 6 markers to identify actual display Mass flow measurement Manual through keypad or online with optional integrated temperature and pressure sensors Housing, signal converter With separate connection compartment Material Die-cast aluminium Protection category IP 65 & IP 67 (better than NEMA 4& 4X) (EN 60529/IEC 529) Current output Operating data programmable, galvanically isolated (not from frequency output) Current 0/4 to 20 ma corresponding to flow values independently programmable with min. span equal to 20% of full scale. Accuracy + 0.1% of FS Temp. coefficient 100 ppm of full scale range per 1 o C Max. load at I100% (20 ma) 700Ω Error annunciation l error=2/22 ma programmable Frequency output Operating data programmable, galvanically isolated (not from current output) Pulse rate for q=100% 10 to 6000000 pulse per hour 0.167 to 600000 pluses per minute 0.0028 to 10000 pluses per second (=Hz) optionally in pulses per liter, m, US/UK gallon, kg, ton, lb, cub. ft. Active output short-circuit-proof suitable for electromechanical (EMC) OR electronic (EC) totalizer Amplitude max. 24 V Load rating See Table "Pulse Width' on page 7 Passive output Open collector for connection of active electronic totalizers (EC) or switchgear Input voltage (external supply) 5 to 24 V Load current Max. 100 ma Ri 100 ohms Accuracy Frequency output mode + 0.% of value Pluse output mode: 0% (no additional error) Communication options RS485 board can be fitted on request in lieu of frequency output for communication of all parameters such as flow, totalized flow, pressure and temperature 6

Pulse width Frequency f = F (atq = 100%) Load rating of active output 100% Load current Load 500 ms 0.0028 Hz < f 1 Hz 150 ma 160 Ohm 200 ms 0.0028 Hz < f 2 Hz 150 ma 160 Ohm 100 ms 0.0028 Hz < f Hz 150 ma 160 Ohm 100 ms Hz < f 5 Hz 60 ma 400 Ohm 50 ms 0.0028 Hz < f 5 Hz 150 ma 160 Ohm 50 ms 5 Hz < f 10 Hz 60 ma 400 Ohm 0 ms 0.0028 Hz < f 6 Hz 150 ma 160 Ohm 0 ms 6 Hz < f 10 Hz 80 ma 00 Ohm Pulse duty factor 1:1 10 Hz < f 1000 Hz 25 ma 1000 Ohm 160 µ s 10000 Hz < f 2547 Hz 25 ma 1000 Ohm 50 µ s 2547 Hz < f 10000 Hz 25 ma 1000 Ohm Dimension Details Wafer style version DN 25 to DN 150 (1" to 6") Wafer style version DN 25 to DN 150 (1" to 6") with locating pipes * Optional * Optional 150 lbs and 00 lbs pipe and meter mating flanges with U/S & D/S straight pipes. 1" and 1.5" meter mating flanges with 00 lbs only but pipe mating flanges can be 150 lbs/00 lbs. *Can be supplied on request Flange version DN 25 to DN 50 (1" & 2") 7

Dimension Details Flange version DN 80 to DN 150 (" to 6") 156(6.14") # PG 16 ø122(4.8") 204(8.0") * ø122(4.8") For EX Version * 240 mm (9.45") # 186 mm (7.2") b di a c Flange version DN 200 (8") 156(6.14")# 204(8.0") * PG 16 ø122(4.8") For EX Version * 240 mm (9.45") # 186 mm (7.2") b a di c DN 10S to DN 20 (/8"S to /4") with U/S & D/S piping (standard) 204(8.0") * 156(6.14") # PG 16 For EX Version * 240 mm (9.45") # 186 mm (7.2") b ø122(4.8") c l a 8

IFC 020 IFC 020 VFM 7000 Technical Data The purchaser is solely responsible for the suitability in accordance with the technical regulation and applicability of our instruments. Range limits for gases based on air at T = 2ºF at 14.70 psia and density = 0.081 lbs/ft (1.29 kg/m ) ANSI meters DIN meters Meter Size Inside Vmin Qmin Vmax Qmax Meter Size Inside Vmin Qmin Vmax Qmax ANSI Diameter(di) DIN Diameter(di) Inches Inches ft/s cfm ft/s cfm mm mm m/s m /hr m/s m /hr /8 S 0.5 49.04 2.07 242.27 9.7 10 S 8.9 14.95.5 7.84 16.54 /8 0.5 4.54 2.92 242.27 19.51 10 12.6 10.5 4.7 7.84.15 1/2 0.59 28.82.40 242.27 27.28 15 14.9 8.78 5.51 7.84 46.5 /4 0.82 20.42 4.74 242.27 5.68 20 20.9 6.22 7.69 7.84 91.20 1 1.05 19.7 7.5 246.06 88.98 25 28.5 5.91 1.56 75 172.24 1 1/2 1.61 19.7 17.24 246.06 208.79 40 4.1 5.91 1.02 75 9.92 2 2.07 19.7 28.52 246.06 45. 50 54.5 5.91 49.59 75 629.86.07 19.7 62.70 246.06 759.6 80 82.5 5.91 11.64 75 144.2 4 4.0 19.7 108.07 246.06 108.75 100 107.1 5.91 191.51 75 242.9 6 6.07 19.7 245.06 246.06 2967.74 150 159. 5.91 42.69 75 581.28 8 7.98 19.7 42.46 246.06 5128.20 200 206.5 5.91 711.97 75 9042.61 Range limits for liquids based on water at 68ºF (20º C) ANSI meters Meter Size Inside Vmin Qmin Vmax Qmax ANSI Diameter(di) Inches Inches ft/s US GPM ft/s cfm /8 S 0.5.67 1.1 19.69 5.9 /8 0.5 2.62 1.59 19.69 11.84 1/2 0.59 2.2 1.85 19.69 16.6 /4 0.82 1.64 2.7 19.69 2.6 1 1.05 1.64 4.4 22.97 62.08 1 1/2 1.61 1.64 10.9 22.97 145.78 2 2.07 1.64 17.22 22.97 241.1.07 1.64 7.86 22.97 50.15 4 4.0 1.64 65.29 22.97 91.7 6 6.07 1.64 147.98 22.97 2094.49 8 7.98 1.64 255.76 22.97 580.41 DIN meters Meter Size Inside Vmin Qmin Vmax Qmax DIN Diameter(di) mm mm m/s US GPM m/s US GPM 10 S 8.9 1.12 1.1 6 5.9 10 12.6 0.8 1.59 6 11.84 15 14.9 0.67 1.85 6 16.6 20 20.9 0.5 2.7 6 2.6 25 28.5 0.5 5.06 7 70.8 40 4.1 0.5 11.58 7 161.89 50 54.5 0.5 18.49 7 258.84 80 82.5 0.5 42.6 7 59.11 100 107.1 0.5 71.41 7 999.54 150 159. 0.5 157.97 7 2211.4 200 206.5 0.5 265.4 7 715.9 Flowrate Qm in lbs/hr for different pressure P and density ρ (ANSI meters) DN Inside P = 15 PSIG P = 50 PSIG P = 75 PSIG P = 100 PSIG P = 150 PSIG P = 200 PSIG P = 250 PSIG P = 00 PSIG ANSI Dia(di) ρ=0.072 lbs/ft ρ=0.1498 lbs/ft ρ=0.206 lbs/ft ρ=0.2569 lbs/ft ρ=0.627 lbs/ft ρ=0.4682 lbs/ft ρ=0.576 lbs/ft ρ=0.679 lbs/ft inch inch min max min max min max min max min max min max min max min max /8"S 0.5 8.81 42.54 14.52 6.90 18.11 74.51 21.48 8.68 27.77 99.44.75 112.97 9.67 125.04 44.9 16.07 /8" 0.50 12.4 85.27 20.49 128.07 25.56 149. 0.2 167.7 9.19 199.0 47.64 226.4 56.00 250.62 6.42 272.7 1/2" 0.59 14.50 119.24 2.91 179.09 29.8 208.8 5.8 24.55 45.7 278.70 55.59 16.6 65.4 50.46 74.00 81.8 /4" 0.82 20.22 24.61. 52.6 41.58 410.87 49. 461.48 6.75 548.5 77.49 622.98 91.09 689.54 10.15 750.8 1" 1.05 1. 82.89 51.64 796.55 64.4 108.0 76.4 1218.85 98.78 1448.28 120.06 1645.9 141.1 1821.18 159.8 1981.87 1 1/2" 1.61 7.51 898.45 121.16 1869.1 151.18 2541.6 179.4 2860.06 21.79 98.42 281.72 860.95 1.17 427.44 75.04 4650.49 2" 2.07 121.58 1486.01 200.40 091.47 250.05 420.0 296.62 470.42 8.7 5620.85 465.96 685.85 547.75 7068.10 620.0 7691.7 ".07 267.5 267.67 440.67 6798.02 549.85 9242.91 652.26 10402.02 84.02 0260.04 1024.62 14042.25 1204.47 15542..47 164.47 1691.81 4" 4.0 460.78 561.8 759.49 11716.7 947.66 1590.1 1124.17 17927.85 1452.95 2102.49 1765.9 24201.78 2075.91 26787.42 250.88 29150.92 6" 6.07 1044.88 12770.80 1722.24 26568.18 2148.92 612.5 2549.17 4065.42 294.72 4805.80 4004.44 54880.26 4707.6 6074.48 50.90 66102.99 8" 7.98 1805.5 22067.68 2975.99 45909.29 71.0 62420.44 4404.92 70248.0 569.21 8471.46 6919.60 9482.00 814.22 10496.5 9211.68 114224.65 Range limits for saturated steam Flowrate Qm in lbs/hr for different pressure P and density ρ (DIN meters) DN Inside P = 15 PSIG P = 50 PSIG P = 75 PSIG P = 100 PSIG P = 150 PSIG P = 200 PSIG P = 250 PSIG P = 00 PSIG DIN Dia(di) ρ=0.072 lbs/ft ρ=0.1498 lbs/ft ρ=0.206 lbs/ft ρ=0.2569 lbs/ft ρ=0.627 lbs/ft ρ=0.4682 lbs/ft ρ=0.576 lbs/ft ρ=0.679 lbs/ft mm mm min max min max min max min max min max min max min max min max 10S 8.9 8.81 42.54 14.52 6.90 18.11 74.51 21.48 8.68 27.77 99.44.75 112.97 9.67 125.04 44.9 16.07 10 12.6 12.4 85.27 20.49 128.07 25.56 149. 0.2 167.7 9.19 199.0 47.64 226.4 56.00 250.62 6.42 272.7 15 14.9 14.50 119.24 2.91 179.09 29.8 208.8 5.8 24.55 45.7 278.70 55.59 16.6 65.4 50.46 74.00 81.8 20 20.9 20.22 24.61. 52.6 41.58 410.87 49. 461.48 6.75 548.5 77.49 622.98 91.09 689.54 10.15 750.8 25 28.5 5.69 46.25 58.8 907.58 7.41 12.98 87.08 188.7 112.55 1650.14 16.79 1874.72 160.80 2075.01 182.10 2258.09 40 4.1 81.6 997.71 14.55 2075.58 167.88 2822.11 199.15 176.02 257.40 77.85 12.84 4287.48 67.76 4745.54 416.47 5164.25 50 54.5 10.52 1595.0 215.14 18.84 268.44 4512.45 18.44 5078. 411.57 604.25 500.2 6855.52 588.0 7587.94 665.92 8257.44 80 82.5 299.09 655.59 492.98 7605.0 615.12 1040.16 729.69 1166.87 94.10 1827. 1146.26 15709.25 147.46 1787.57 1525.95 18921.70 100 107.1 504.05 6160.67 80.81 12816.57 106.65 17426.02 1229.7 19611.4 1589.8 202.87 191.76 26474.42 2270.84 2902.85 2571.64 1888.29 150 159. 115.14 1629.5 188.04 2854.67 229.42 8552.5 2720.58 487.02 516.26 5155.97 427.71 58570.51 502.89 64827.98 5689.5 70547.87 200 206.5 187.86 22902.84 088.62 47646.7 85.8 64782.76 4571.6 72906.86 5908.57 8660.47 7181.48 98420.95 8442.06 10895.90 9560.0 118547.51 9

Dimensions and Weights Flange connections to DIN 2501 and ANSI B16.5 (Schedule 40) Wafer design to DIN 19205 and ANSI Groove joint to DIN 2512 and ANSI, dimensions on request Dimension 'a' without gaskets between flowmeter and pipe flanges. Gaskets not included with flowmeter. High temperature version with "raised" signal converter housing: dimensions b + 100 mm Note the operating limits to DIN 2401 and ANSI 16.5. Flange connections to DIN 2501 and ANSI B16.5 Wafer version Meter size Pressure rating Dimensions in mm/inches Approximate weight DN:mm of flanges With pressure sensor Without With pressure ANSI:inches di a b c b c pressure sensor sensor mm inch mm inch mm inch mm inch mm inch mm inch kg lbs kg lbs DN 25 PN 40 28.5 1.12 65 2.56 18 12.52 69 2.72 65 14.8 161 6.2 5.0 11.1 5.8 12.9 DN 25 PN 100 28.5 1.12 65 2.56 18 12.52 69 2.72 65 14.8 161 6.2 5.0 11.1 5.8 12.9 1" 00 LBS 26.7 1.05 65 2.56 19 12.56 69 2.72 66 14.40 161 6. 5.0 11.1 5.8 12.9 DN 40 PN 40 4.1 1.70 65 2.56 9 1.5 89.50 76 14.81 178 7.01 5.5 12.1 6. 1.8 DN 40 PN 100 4.1 1.70 65 2.56 9 1.5 89.50 76 14.81 178 7.01 5.5 12.1 6. 1.8 1.5" 00 LBS 40.9 1.61 65 2.56 40 1.9 89.50 77 14.86 179 7.04 5.5 12.1 6. 1.8 DN 50 PN 40 54.5 2.15 65 2.56 48 1.70 100.94 80 14.95 188 7.41 5.7 12.6 6.5 14.4 DN 50 PN 64 54.5 2.15 65 2.56 48 1.70 100.94 80 14.95 188 7.41 5.7 12.6 6.5 14.4 DN 50 PN 100 54.5 2.15 65 2.56 48 1.70 100.94 80 14.95 188 7.41 5.7 12.6 6.5 14.4 2" 150 LBS 52.6 2.07 65 2.56 49 1.74 100.94 81 14.99 189 7.45 5.7 12.6 6.5 14.4 2" 00 LBS 52.6 2.07 65 2.56 49 1.74 100.94 81 14.99 189 7.45 5.7 12.6 6.5 14.4 DN 80 PN 40 82.5.25 65 2.56 80 14.95 16 5.5 9 15.49 227 8.94 7.5 16.4 8. 18.2 DN 80 PN 64 82.5.25 65 2.56 80 14.95 16 5.5 9 15.49 227 8.94 7.5 16.4 8. 18.2 DN 80 PN 100 82.5.25 65 2.56 80 14.95 16 5.5 9 15.49 227 8.94 7.5 16.4 8. 18.2 " 150 LBS 78.07 65 2.56 87 15.2 16 5.5 401 15.77 220 8.66 7.5 16.4 8. 18.2 " 00 LBS 78.07 65 2.56 87 15.2 16 5.5 401 15.77 220 8.66 7.5 16.4 8. 18.2 DN 100 PN 16 107.1 4.22 80.15 406 15.98 159 6.26 408 16.07 251 9.88 8.5 18.7 9. 20.5 DN 100 PN 40 107.1 4.22 80.15 406 15.98 159 6.26 408 16.07 251 9.88 8.5 18.7 9. 20.5 DN 100 PN 64 107.1 4.22 80.15 406 15.98 159 6.26 408 16.07 251 9.88 8.5 18.7 9. 20.5 4" 150 LBS 102.4 4.0 80.15 408 16.08 159 6.26 411 16.17 254 9.98 8.5 18.7 9. 20.5 4" 00 LBS 102.4 4.0 80.15 408 16.08 159 6.26 411 16.17 254 9.98 8.5 18.7 9. 20.5 DN 150 PN 16 159. 6.27 145 5.71 47 18.60 216 8.50 411 16.17 16 12.42 17.8 9.2 18.6 41.0 DN 150 PN 40 159. 6.27 145 5.71 47 18.60 216 8.50 411 16.17 16 12.42 17.8 9.2 18.6 41.0 6" 150 LBS 154.2 6.07 145 5.71 475 18.70 216 8.50 411 16.17 18 12.50 17.8 9.2 18.6 41.0 6" 00 LBS 154.2 6.07 145 5.71 475 18.70 216 8.50 411 16.17 18 12.50 17.8 9.2 18.6 41.0 Dimension 'a' with Upstream (U/S) and Downstream (D/S) piping Meter Size With 20D U/S & With 0D U/S & With 40D U/S & With 50D U/S & ANSI/DIN 5D D/S 5D D/S 5D D/S 5D D/S Inch mm Inch mm Inch mm Inch mm 1"/DN 25 27.40 696 7.24 946 47.09 1196 56.9 1446 1.5"/DN 40 42.17 1071 57.91 1471 7.66 1871 89.41 2271 2"/DN 50 52.01 121 71.69 1821 91.8 221 111.06 2821 "/DN 80 81.54 2071 11.0 2871 144.5 671 176.02 4471 4"/DN 100 101.81 2586 141.18 586 180.55 4586 219.92 5586 6"/DN 150 15.58 901 212.64 5401 271.69 6901 0.75 8401 10

Dimensions and Weights (continued): Meter Sizes /8"S - /4" (DN 10S to DN 20) Wafer version Meter size Pressure rating Dimensions in mm/inches Approximate weight DN:mm of flanges With pr. sensor Without With pressure ANSI:inches di a b c c l pressure sensor sensor mm inch mm inch mm inch mm inch mm inch mm inch kg lbs kg lbs DN 10S DN10,PN40 8.9 0.5 606 2.9 54 1.95 152 5.98 20 9.06 480 18.9 11.57 25.51 12.7 27.28 DN10,PN100 8.9 0.5 606 2.9 54 1.95 152 5.98 20 9.06 480 18.9 12.8 27.0 1.18 29.06 DN15,PN40 8.9 0.5 606 2.9 54 1.95 152 5.98 20 9.06 480 18.9 11.7 25.86 12.5 27.6 DN15,PN100 8.9 0.5 606 2.9 54 1.95 152 5.98 20 9.06 480 18.9 12.61 27.81 1.41 29.57 DN20,PN40 8.9 0.5 606 2.9 54 1.95 152 5.98 20 9.06 480 18.9 12.4 27.21 1.14 28.97 DN25,PN40 8.9 0.5 606 2.9 54 1.95 152 5.98 20 9.06 480 18.9 12.78 28.18 1.58 29.94 DN25,PN100 8.9 0.5 606 2.9 54 1.95 152 5.98 20 9.06 480 18.9 15.47 4.11 16.27 5.88 /8"S 1/2"NB,ANSI150 8.9 0.5 606 2.9 54 1.95 152 5.98 20 9.06 480 18.9 11.11 24.50 11.91 26.26 1/2"NB,ANSI00 8.9 0.5 606 2.9 54 1.95 152 5.98 20 9.06 480 18.9 11.58 25.5 12.8 27.0 /4"NB,ANSI150 8.9 0.5 606 2.9 54 1.95 152 5.98 20 9.06 480 18.9 11.51 25.8 12.1 27.14 /4"NB,ANSI00 8.9 0.5 606 2.9 54 1.95 152 5.98 20 9.06 480 18.9 12.58 27.74 1.8 29.50 1"NB,ANSI150 8.9 0.5 606 2.9 54 1.95 152 5.98 20 9.06 480 18.9 11.99 26.44 12.79 28.20 1"NB,ANSI00 8.9 0.5 606 2.9 54 1.95 152 5.98 20 9.06 480 18.9 1.18 29.06 1.98 0.8 DN 10 DN10,PN40 12.6 0.5 826 2.5 56 14.02 154 6.05 22 9.14 665 26.2 12.15 26.79 12.95 28.55 DN10,PN100 12.6 0.5 826 2.5 56 14.02 154 6.05 22 9.14 665 26.2 12.96 28.58 1.76 0.4 DN15,PN40 12.6 0.5 826 2.5 56 14.02 154 6.05 22 9.14 665 26.2 12.1 27.14 1.11 28.91 DN15,PN100 12.6 0.5 826 2.5 56 14.02 154 6.05 22 9.14 665 26.2 1.18 29.06 1.98 0.8 DN20,PN40 12.6 0.5 826 2.5 56 14.02 154 6.05 22 9.14 665 26.2 12.92 28.49 1.72 0.25 DN25,PN40 12.6 0.5 826 2.5 56 14.02 154 6.05 22 9.14 665 26.2 1.5 29.44 14.15 1.20 DN25,PN100 12.6 0.5 826 2.5 56 14.02 154 6.05 22 9.14 665 26.2 16.04 5.7 16.84 7.1 /8" 1/2"NB,ANSI150 12.6 0.5 826 2.5 56 14.02 154 6.05 22 9.14 665 26.2 11.70 25.80 12.50 27.56 1/2"NB,ANSI00 12.6 0.5 826 2.5 56 14.02 154 6.05 22 9.14 665 26.2 12.16 26.81 12.96 28.58 /4"NB,ANSI150 12.6 0.5 826 2.5 56 14.02 154 6.05 22 9.14 665 26.2 12.09 26.66 12.89 28.42 /4"NB,ANSI00 12.6 0.5 826 2.5 56 14.02 154 6.05 22 9.14 665 26.2 1.16 29.02 1.96 0.78 1"NB,ANSI150 12.6 0.5 826 2.5 56 14.02 154 6.05 22 9.14 665 26.2 12.57 27.72 1.7 29.48 1"NB,ANSI00 12.6 0.5 826 2.5 56 14.02 154 6.05 22 9.14 665 26.2 1.76 0.4 14.56 2.10 DN 15 DN15,PN40 14.9 0.59 966 8 57 14.06 155 6.10 241 9.48 780 0.7 12.58 27.74 1.8 29.50 DN15,PN100 14.9 0.59 966 8 57 14.06 155 6.10 241 9.48 780 0.7 1.45 29.66 14.25 1.42 DN20,PN40 14.9 0.59 966 8 57 14.06 155 6.10 241 9.48 780 0.7 1.19 29.08 1.99 0.85 DN25,PN40 14.9 0.59 966 8 57 14.06 155 6.10 241 9.48 780 0.7 1.62 0.0 14.42 1.80 DN25,PN100 14.9 0.59 966 8 57 14.06 155 6.10 241 9.48 780 0.7 16.0 5.94 17.10 7.71 1/2" 1/2"NB,ANSI150 14.9 0.59 966 8 57 14.06 155 6.10 241 9.48 780 0.7 11.98 26.42 12.78 28.18 1/2"NB,ANSI00 14.9 0.59 966 8 57 14.06 155 6.10 241 9.48 780 0.7 12.44 27.4 1.24 29.19 /4"NB,ANSI150 14.9 0.59 966 8 57 14.06 155 6.10 241 9.48 780 0.7 12.7 27.28 1.17 29.04 /4"NB,ANSI00 14.9 0.59 966 8 57 14.06 155 6.10 241 9.48 780 0.7 1.4 29.61 14.2 1.8 1"NB,ANSI150 14.9 0.59 966 8 57 14.06 155 6.10 241 9.48 780 0.7 12.84 28.1 1.64 0.08 1"NB,ANSI00 14.9 0.59 966 8 57 14.06 155 6.10 241 9.48 780 0.7 14.0 0.94 14.8 2.70 DN 20 DN20,PN40 20.9 0.82 126 52.2 60 14.19 158 6.21 255 10.05 780 0.7 14.0 0.94 14.8 2.70 DN25,PN40 20.9 0.82 126 52.2 60 14.19 158 6.21 255 10.05 780 0.7 14.47 1.91 15.27.67 DN25,PN100 20.9 0.82 126 52.2 60 14.19 158 6.21 255 10.05 780 0.7 17.1 7.77 17.9 9.54 /4" /4"NB,ANSI150 20.9 0.82 126 52.2 60 14.19 158 6.21 255 10.05 780 0.7 1.2 29.17 14.0 0.94 /4"NB,ANSI00 20.9 0.82 126 52.2 60 14.19 158 6.21 255 10.05 780 0.7 14.28 1.49 15.08.25 1"NB,ANSI150 20.9 0.82 126 52.2 60 14.19 158 6.21 255 10.05 780 0.7 1.70 0.21 14.50 1.97 1"NB,ANSI00 20.9 0.82 126 52.2 60 14.19 158 6.21 255 10.05 780 0.7 14.88 2.81 15.68 4.57 11

Dimensions and Weights (continued) Meter Sizes 1" - 8" (DN 25 to DN 200) Flanged version Meter size Pressure rating Dimensions in mm/inches Approximate weight DN:mm of flanges With pressure sensor Without With ANSI:inches di a b b c pressure sensor pressure sensor mm inch mm inch mm inch mm inch mm inch kg lbs kg lbs DN 25 PN 40 28.5 1.12 250 9.84 41 1.4 65 14.8 184 7.2 5.9 12.9 6.7 14.7 DN 25 PN 100 28.5 1.12 250 9.84 54 1.92 65 14.8 196 7.72 7.1 15.6 7.9 17.4 1" 150 LBS 26.7 1.05 250 9.84 8 1.2 66 14.42 180 7.10 5.4 11.9 6.2 1.7 1" 00 LBS 26.7 1.05 250 9.84 46 1.64 66 14.42 188 7.41 5.9 1.0 6.7 14.8 DN 40 PN 40 4.1 1.70 250 9.84 70 14.55 76 14.81 208 8.21 6.9 15.1 7.7 16.9 DN 40 PN 100 4.1 1.70 250 9.84 80 14.94 76 14.81 218 8.60 8,6 19.0 9.4 20.8 1.5" 150 LBS 40.9 1.61 250 9.84 59 14.14 77 14.86 198 7.79 6.5 14. 7. 16.1 1.5" 00 LBS 40.9 1.61 250 9.84 7 14.70 77 14.86 212 8.5 7.6 16.7 8.4 18.4 DN 50 PN 40 54.5 2.15 250 9.84 81 14.98 81 14.98 221 8.69 8.2 18.0 9.0 19.8 DN 50 PN 64 54.5 2.15 250 9.84 96 15.57 96 15.57 228 8.98 9.7 21. 10.5 2.1 DN 50 PN 100 54.5 2.15 250 9.84 88 15.28 88 15.28 26 9.28 10.8 2.8 11.6 25.5 2" 150 LBS 52.6 2.07 250 9.84 75 14.77 81 14.99 215 8.48 8.0 17.6 8.8 19.4 2" 00 LBS 52.6 2.07 250 9.84 82 15.02 81 14.99 222 8.7 8.7 19.2 9.5 20.9 DN 80 PN 40 82.5.25 250 9.84 412 16.21 412 16.21 259 10.20 12.5 27.6 1. 29.4 DN 80 PN 64 82.5.25 250 9.84 412 16.21 412 16.21 259 10.20 12.5 27.6 1. 2.7 DN 80 PN 100 82.5.25 250 9.84 419 16.50 419 16.50 274 10.79 15.7 4.6 16.5 6.4 " 150 LBS 78.07 250 9.84 414 16.0 414 16.0 247 9.7 1. 29. 14.1 1.0 " 00 LBS 78.07 250 9.84 42 16.66 42 16.66 256 10.09 14.8 2.6 15.6 4. DN 100 PN 16 107.1 4.22 250 9.84 444 17.48 444 17.48 281 11.06 1.1 28.9 1.9 4. DN 100 PN 40 107.1 4.22 250 9.84 416 16.6 416 16.6 288 11.6 14.6 2.2 15.4 4.0 DN 100 PN 64 107.1 4.22 250 9.84 47 17.19 47 17.19 296 11.65 17.0 7.4 17.8 9.1 4" 15 LBS 102.4 4.0 250 9.84 44 17.45 44 17.45 288 11.5 15.8 4.8 16.6 6.6 4" 00 LBS 102.4 4.0 250 9.84 456 17.95 456 17.95 01 11.85 19.6 4.2 20.4 45.0 DN 150 PN 16 159. 6.27 250 9.84 507 19.96 507 19.96 50 1.78 17.9 9.5 18.7 41. DN 150 PN 40 159. 6.27 250 9.84 514 20.24 514 20.24 58 14.08 20.8 45.9 21.6 47.7 6" 150 LBS 154.2 6.07 250 9.84 507 19.95 507 19.95 49 1.75 21.0 46. 21.8 48.0 6" 00 LBS 154.2 6.07 250 9.84 526 20.70 526 20.70 68 14.50 28.5 62.9 29. 64.7 DN 200 PN 10 206.5 8.1 00 11.81 57 22.55 57 22.55 411 16.19 44.7 98.5 45.5 100. DN 200 PN 16 206.5 8.1 00 11.81 57 22.55 57 22.55 411 16.19 44.2 97.4 45.0 99.2 8" 150 LBS 202.7 7.98 00 11.81 576 22.68 576 22.68 411 16.17 51.8 114.1 52.6 115.9 8" 00 LBS 202.7 7.98 00 11.81 595 2.4 595 2.4 40 16.92 7.1 161.2 7.9 162.9 12

Dimensions and Weights (continued) LOCATING FLANGE LOCATING FLANGE (DIN) FLANGES A B C D E F G H mm inch mm inch mm inch mm inch mm inch mm inch mm inch no. of holes DN25-PN40.7 1. 69 2.72 85.5 115 4.5 22 0.87 4 0.16 14 0.55 4 DN25-PN100.7 1. 69 2.72 100.94 140 5.51 26 1.02 4 0.16 18 0.71 4 DN40-PN40 48. 1.90 89.50 110 4. 150 5.91 19 0.75 4 0.16 18 0.71 4 DN40-PN100 48. 1.90 89.50 125 4.92 170 6.69 27 1.06 4 0.16 2 0.91 4 DN50-PN40 60. 2.7 100.94 125 4.92 165 6.50 21 0.8 4 0.16 18 0.71 4 DN50-PN64 60. 2.7 100.94 15 5.1 180 7.09 27 1.06 4 0.16 2 0.91 4 DN50-PN100 60. 2.7 100.94 145 5.71 195 7.68 29 1.14 4 0.16 27 1.06 4 DN80-PN40 88.9.50 16 5.5 160 6.0 200 7.87 25 0.98 4 0.16 18 0.71 8 DN80-PN64 88.9.50 16 5.5 170 6.69 215 8.46 29 1.14 4 0.16 2 0.91 8 DN80-PN100 88.9.50 16 5.5 180 7.09 20 9.06 1.0 4 0.16 26 1.02 8 DN100-PN16 114. 4.50 159 6.26 180 7.09 220 8.66 24 0.94 4 0.16 18 0.71 8 DN100-PN40 114. 4.50 159 6.26 190 7.48 25 9.25 25 0.98 4 0.16 22 0.87 8 DN100-PN64 114. 4.50 159 6.26 200 7.87 250 9.84 1 1.22 4 0.16 26 1.02 8 DN150-PN16 168. 6.6 216 8.50 240 9.45 285 11.22 2 0.91 4 0.16 22 0.87 8 DN150-PN40 168. 6.6 216 8.50 250 9.84 00 11.81 29 1.14 4 0.16 26 1.02 8 LOCATING FLANGE (ANSI) FLANGES A B C D E F G H mm inch mm inch mm inch mm inch mm inch mm inch mm inch no. of holes 1"-00lbs.7 1. 69 2.72 88.9.50 12.9 4.88 19 0.75 4 0.16 19 0.75 4 1.5"-00lbs 48. 1.90 89.50 114. 4.50 155.4 6.12 22 0.87 4 0.16 22. 0.88 4 2"-150lbs 60. 2.7 100.94 120.7 4.75 152.4 6.00 20.5 0.81 4 0.16 19 0.75 4 2"-00lbs 60. 2.7 100.94 127 5.00 165.1 6.50 24 0.94 4 0.16 19 0.75 8 "-150lbs 88.9.50 16 5.5 152.4 6.00 190.5 7.50 25 0.98 4 0.16 19 0.75 4 "-00lbs 88.9.50 16 5.5 168.1 6.62 209.5 8.25 0 1.18 4 0.16 22. 0.88 8 4"-150lbs 114. 4.50 159 6.26 190.5 7.50 228.6 9.00 25 0.98 4 0.16 19 0.75 8 4"-00lbs 114. 4.50 159 6.26 200.1 7.88 254 10.00 1.0 4 0.16 22. 0.88 8 6"-150lbs 168. 6.6 216 8.50 241. 9.50 279.4 11.00 27 1.06 4 0.16 22.4 0.88 8 6"-00lbs 168. 6.6 216 8.50 269.7 10.62 17.5 12.50 8 1.50 4 0.16 22.4 0.88 12 1

Application Specific Models Saturated Steam Meter: VFM 7000 SSM with built-in Pt 1000 temperature sensor and measuring mass flowrate of steam with online density compensation. Condensate Flowmeter: VFM 7000 CFM with built-in Pt 1000 temperature sensor and measuring mass flowrate of steam condensate with online density compensation. Gas Flowmeter: VFM 7000 GFM with built-in Pt 1000 temperature and pressure sensors, measuring the normalized volumetric or mass flowrate of gas with online pressure, temperature and compressibility factor (PTZ) correction. Compressibility factor correction uses the Redlich- Kwong equations. Free Air Delivery Flowmeter: VFM 7000 FAD for compressed air with built-in Pt 1000 temperature and pressure sensors, measuring the normalized volumetric or mass flowrate of compressed air with online pressure, temperature and compressibility factor (PTZ) correction and facility to program the compressor motor RPM and Relative Humidity (RH) for computing the FAD. Natural Gas Meter: VFM 7000 NGM with built-in Pt 1000 temperature and pressure sensors with added facility to program the gas composition and density computation according to American Gas Association standards, AGA 8. Detailed Characterization Method is used in the computation of compressibility factor and density correction. Heat Meter: VFM 7000 HM with built-in Pt 1000 temperature sensor to directly measure the heat content of steam, hot water or chilled water with density correction. It has two separate internal totalizers one for the mass flow and the other for the heat content. A look-up table for the specific Enthalpy vs. Temperature is programed in the unit for heat/energy calculation. Net Heat Meter: VFM 7000 NHM is an extension of VFM 7000 HM with a provision for a second temperature input, 4-20 ma, from an external temperature transmitter. It directly measures the net heat imparted to the process in the case of heating using steam or hot water, and heat extracted from the process in the case of cooling using chilled water. On request, it can also support the display of the billed amount in different currencies. VFM 7000 VFM 7000 VFM 7000 GFM VFM 7000 NHM 14

IFC 020 IFC 020 IFC 020 VFM 7000 Electrical connection Power supply, power consumption and load rating of outputs; see "Technical Data" (Page 6). Current and frequency outputs (I + F) must be galvanically isolated from all input and output circuits but not from each other. If I and F are used simultaneously, a grounded receiver instrument may only be connected to one of the two outputs. Power supply 0 Volt 100 24 Volt 5 6 4 4.1 4.2 11 12 Internal connection frequency output F Outputs N L FE AC Frequency output F active for EC or EMC Frequency output F active for EC Frequency output F passive 5 6 4 4.14.2 + - 0V 24V + EMC EC - 5 6 4 4.1 4.2 - EC + R 1K 1W 5 6 4 4.14.2 - EC + - + 5-24 V/max 100 ma EMC: electro mechanical counter EC: electronic counter R needed only for totalizers with input voltages Umax < 0 volt Umax 24 V 12 V 5 V R (Ohm).9 K 680 180 Current Output I RS22 output (optional) RS485 output (optional) 5 6 4 4.1 4.2 + - 5 6 4 4.1 4.2 5 6 4 4.14.2 + - Ae.g. 0to20mA RXD TXD GND TX+ TX- GND to Remote System to Remote System 15

Application Information Installation guidelines Inside diameter of flowmeter must be same as that of pipeline. Install flowmeter in-line with pipe axis, gaskets must not intrude into pipeline. Shut off and control elements must be downstream of outlet runs. Install a flow straightener if disturbed flow conditions exist on the inlet side. Avoid pulsating flow and vibration. For flowmetering of steam and vapors, ensure a sufficient pressure is maintained downstream of the flowmeter to avoid cavitation and condensation. Use straight inlet and outlet runs Inlet run - downstream of reducer 20 x DN* - downstream of quarter bend 20 x DN - downstream of two quarter bends 0 x DN - downstream of three quarter bends 40 x DN - downstream of valves 50 x DN Outlet run 5xDN * DN = Meter size Position of Signal Converter Housing Please specify when ordering. Standard version supplied if the position is not specified. The arrows indicate the direction of the flow. 16

Ordering code Flow meter 7000(I)K+F Code 12 METER SIZE 10S SIZE DN10S 010 SIZE DN10 015 SIZE DN15 020 SIZE DN20 025 SIZE DN25 040 SIZE DN40 050 SIZE DN50 080 SIZE DN80 45 100 150 200 S8 /8 1/2 /4 1,0 MODEL 5I VFM 7000 INVESTCAST SIZE DN100 SIZE DN150 SIZE DN200 SIZE ANSI /8 S SIZE ANSI /8 SIZE ANSI 1/2 SIZE ANSI /4 SIZE ANSI 1 1,5 2,0,0 4,0 6,0 8,0 SIZE ANSI 1.5 SIZE ANSI 2 SIZE ANSI SIZE ANSI 4 SIZE ANSI 6 SIZE ANSI 8 6 CONSTRUCTION MATERIAL TYPE MATERIAL TYPE A G WAFER, DN25-DN100, ANSI 1-4 SS16L WAFER, DN150, ANSI 6 SS04 H FLANGED, DN25-100, ANSI 1-4 SS16L I FLANGED, DN150-200, ANSI 6-8 SS04 J B C D E F 7 SIZE FOR PRESSURE RATING SIZE FOR A DN200 PN10 K 10S, 10,15, 20, /8 S, /8, 1/2, /4 B DN100-200 PN16 L 10S, 10,15, 20, /8 S, /8, 1/2, /4 C DN25-150 PN40 M 10S, 10,15, 20, /8 S, /8, 1/2, /4 D DN50-100 PN64 N 10S, 10,15, /8 S, /8 E DN25-80 PN100 O 10S, 10,15, /8 S, /8 F 1-8 150LBS P 10S, 10,15, /8 S, /8, 1/2 G 1-8 00LBS Q 10S, 10,15, /8 S, /8, 1/2 H 10S, 10,15, /8 S, /8, 1/2 1/2 NB ANSI 150 R 10S, 10,15, 20, /8 S, /8, 1/2, /4 I 10S, 10,15, /8 S, /8, 1/2 1/2 NB ANSI 00 S 10S, 10,15, 20, /8 S, /8, 1/2, /4 J 10S, 10,15, 20, /8 S, /8, 1/2, /4 /4 NB ANSI 150 T 10S, 10,15, 20, /8 S, /8, 1/2, /4 8 O-RING MATERIAL A VITON O-RING FOR DAMPER PIN B KALREZ 4079 O-RING FOR DAMPER PIN C PAROFLUOR O-RING FOR DAMPER PIN 9 PRESSURE SENSOR RANGE A NOT APPLICABLE B 0-100 PSIG C 0-200 PSIG D 0-00 PSIG 10 AREA CLASSIFICATION A CONVERTER CE (NON EX) B CONVERTER EX-CMRI C CONVERTER EX-CSA AND CE D CONVERTER EX-PTB AND CE K L INTEGRAL US/DS, DN10S-20, ANSI /8S -/4 APPLICATION (NON STEAM, -4 TO 56 DEG.F) (NON STEAM, -4 TO 428 DEG.F) (STEAM -4 TO 464 DEG.F) E 0-500 PSIG F 0-1000 PSIG G 0-50 PSIG H 0-0 PSIG (NOT AVAILABLE WITH FIELD VERSION) (NOT AVAILABLE WITH FIELD VERSION) SS16L PRESSURE RATING /4 NB ANSI 00 1 NB ANSI 150 1 NB ANSI 00 DN10 PN40 DN10 PN100 DN15 PN40 DN15 PN100 DN20 PN40 DN25 PN40 DN25 PN100 11 COMMUNICATION A FREQUENCY OUTPUT B RS22 C RS485 12 INTEGRAL/FIELD VERSION A INTEGRAL STANDARD SUPPLY B REMOTE 1 LONG NECK A NOT APPLICABLE B REQUIRED 14 POWER SUPPLY A 100VAC B 110VAC C 120VAC 15 SOFTWARE VERSION A VER 11.7 B VER 12.0A C VER 11.7 NHM FREQUENCY OUTPUT IS STANDARD FREQUENCY OUTPUT NOT AVAILABLE FREQUENCY OUTPUT NOT AVAILABLE TEMP > 02 DEG.F, STANDARD FOR STEAM D 200VAC E 220VAC F 240VAC STANDARD SUPPLY FOR SATURATED STEAM, LIQUIDS, GASES & FAD METERING, NATURAL GAS METERING AS PER AGA 8 FOR NET HEAT METER Additional ordering datas: fluid, operating pressure, temperature, min. & max.flowrate, density and line size. *Please contact KROHNE *FOR FIELD VERSION LONG NECK NOT APPLICABLE E.g. DIN meter: DN80 Sandwich Parafluor O Rings, 110VAC Power Supply, Integral PN40 RS485 communication, CSA marked 080 5I G C C A C C A A B A 17

Represented by: Subject to change without notice 000/02-02/499 Forbes Marshall Inc. 101, California Ave, D100, P.O. Box 60670, Palo Alto CA 9406, California, U.S.A. Tel.: 001 650 27 4227, 1467 Fax: 001 650 27 4127 Email: forbesmarshall@ix.netcom.com www.forbesmarshall.com/metering www.forbesmarshallinc.com