KODIK + ONE RUSHERS Specification Sheet *rushers shown without standard sheave RUSHER High efficiency roller bearing design Remote lose Side Setting (SS) adjustment Digital read out setting control Patented brass bowl threads Patented no creep bowl clamp Patented mechanical crusher duty cone brake Patented liner retention assembly Low impact Tramp Iron Relief (TIR) system Pressure relief valves Large bore heavy duty relief cylinders Hydraulic one button chamber clearing ronze field replaceable V-Seat liners Permanently precision balanced Protected counter weights aseframe tub liners field replaceable 400HN Manganese liners (Select from list of interchangeable liners) rusher tools Operation and Maintenance manuals rusher Feed Hopper HYDRULI POWER UNIT 40 gal (5L) reservoir (Filled at the factory) 5HP (kw) TEF motor 6 gpm (23Lpm) Remote control panel w/ 50 cable OIL OOLER HP (.75kW) TEF motor LUE SSEMLY 25 gal (4L) reservoir (Filled at the factory) 3HP (2.2kW) TEF motor 6 gpm (23Lpm) 2 X 500W heaters utomatic oil cooler bypass Oil flow meter with failsafe system PHYSIL/OPERTING HRTERISTIS K200 + 200HP (50kW) K300 + 300HP (225kW) K400 + 400HP (300kW) Pinion Speeds 00-000 RPM Standard pinion speed 00 RPM K200 + 6gr V 24.6PD drive sheave K300 + 0gr V 24.6PD drive sheave K400 + 2gr V 24.6PD drive sheave RUSHER OPTIONS ogged belt drive Longer remote cables (00, 50, 200 ) Hopper extention Hopper extention with overflow chute old climate oil recirculating kit rusher automation package Hydraulic cone brake
K200 + K300 + K400 + Kodiak + Dimensions D 66 in 667 mm 37.25 in 43 mm 25.75 in 657 mm 4.375 in 365 mm 72.25 in 35 mm 42.25 in 073 mm 30 in 762 mm 4.75 in 37 mm 7.25 in 203 mm 4 in 2 mm 36.5 in 27 mm 3.75 in 34 mm (G) MX LER (H) MX RUSHING ZONE (J) MIN RUSHING ZONE E 6.375 in 46 mm 6.75 in 42 mm 5.75 in 400 mm F 23.75 in 607 mm 2.75 in 734 mm 33.75 in 57 mm G H J K 7.75 in 202 mm 73.75 in 76 mm 65.5 in 664 mm 40.33 in 024 mm 3.25 in 2 mm 77.75 in 75 mm 6.25 in 734 mm 4 in 04 mm 0.25 in 222 mm 5.25 in 262 mm 75.375 in 5 mm 46.25 in 75 mm Q N K M L S(4X) L 53.52 in 35 mm 56.52 in 436 mm 62.25 in 57 mm P T M N 75.375 in 5 mm 3.75 in 7 mm 7.75 in 2026 mm 42 in 067 mm 5.25 in 265 mm 44.5 in 30 mm R U P Q 77.5 in 6 mm 3.75 in 7 mm 4 in 234 mm 42 in 067 mm in 226 mm 44. in 30 mm X W V R 42 in 067 mm 46 in 6 mm 46.25 in 75 mm K200 + K300 + K400 + S.75 in 47.625 mm.625 in 47.625 mm.625 in 4.275 mm HED DIMETER 40 in 06 mm 45 in 43 mm 54 in 372 mm T 52 in 32 mm 55 in 37 mm 5 in 4 mm OPERTING RNGE 00 50 rpm 00 50 rpm 00 50 rpm U 26 in 660 mm 27.5 in 6 mm 2.5 in 74 mm HORSEPOWER 200 50 kw 300 225 kw 400 300 kw V 63.25 in 607 mm 6.5 in 765 mm 74 in 0 mm TOTL WEIGHT 34,000 lbs 5,422 kg 4,25 lbs,73 kg 52, lbs 23,637 kg W 26 in 660 mm 27.5 in 6 mm 2.5 in 74 mm UPPER SSEMLY WITH LINER 2,560 lbs 567 kg,476 lbs 3 kg,350 lbs 777 kg X 52 in 32 mm 55 in 37 mm 5 in 4 mm LOWER SSEMLY WITH MNTLE & SHEVE 20,300 lbs 20 kg 23,552 lbs 0,63 kg 3,300 lbs 4,7 kg FOR MORE INFORMTION LL -00-34-4656 ND SK FOR JI EQUIPMENT SPEILIST Note: Specifications are subject to change without notice. ecause KPI-JI may use in its catalog & literature, field photographs of its products which may have been modified by the owners, products furnished by KPI-JI may not necessarily be as illustrated therein. lso continuous design progress makes it necessary that specifications be subject to change without notice. ll sales of the products of KPI-JI are subject to the provisions of its standard warranty. KPI-JI does not warrant or represent that its products meet any federal, state, or local statutes, codes, ordinances, rules, standards or other regulations, including OSH and MSH, covering safety, pollution, electrical wiring, etc. ompliance with these statutes and regulations is the responsibility of the user and will be dependent upon the area and the use to which the product is put by the user. In some photographs, guards may have been removed for illustrative purposes only. This equipment should not be operated without all guards attached in their normal position. Placement of guards and other safety equipment is often dependent upon the area and how the product is used. safety study should be made by the user of the application, and, if required additional guards, warning signs and other safety devices should be installed by the user, wherever appropriate before operating the products 6470 Franklin lvd, Eugene, OR 7405-00-34-4656 Fax: 54--40 Email: mail@jcieug.com www.kpijci.com Kodiak + rushers, Rev 0,07/0 Printed in US
Kodiak + Series one rusher Liner Specification Sheet K200 + Liners K200 + oarse hamber K200 + Medium hamber Mantle: 40605X (24lbs/567kg) Liner: 406053X (443lbs/655kg) Mantle: 40605X (24lbs/567kg) Liner: 406055X (40lbs/67kg) (22.6mm) /2 (25.mm) 0 (254mm) /2 (24.3mm) 2 (50.mm) /2 (3.mm) 5 (46mm) 5 (46mm) 7 (77.mm) 6 (7.4mm) /4 (3.7mm) / (2.6) Product Range: to 2 Reduction Ratio: 4: to : Max. (ased on no bowl float. If /4 7 (6.mm) /4 (234.mm) (22.6mm) /4 (3.7mm) Product Range: to Reduction Ratio: 3: to 6: Max. (ased on no bowl float. If 5 /4 (33.3mm) 5 3/6 (3.mm) 5 (27mm) 6 /2 (65.mm) 6 3/ (6.mm) 6 /4 (5.mm) K200 + Fine hamber K200 + Medium hamber with Feed Slots Mantle: 406052X (0lbs/503kg) Liner: 406056X (30lbs/53kg) Mantle: 40605X(24lbs/567kg) Liner: 406054X (40lbs/67kg) 3 / (7.4mm) 3 (76.2mm) 6 (52.4mm) 4 /2 (4.3mm) 7 /2 (0.5mm) 7 /4 (4.2mm) /2 (25.mm) /4 /4 (3.7mm) / (2.6mm) 2 (73mm) 4 /2 (4.3mm) /2 (2.7mm) 7 (77.mm) 2 (6.mm) 4 /2 (4.3mm) 3/ (.5mm) 6 (74.6mm) 7 (200mm) Product Range: 3/ to Reduction Ratio: 3: to 6: Max. (ased on no bowl float. If Product Range: to Reduction Ratio: 4: to 6: Max. (ased on no bowl float. If 6 (7.4mm) 7 (6.mm) K300 + Liners K300 + oarse hamber K300 + Medium oarse hamber Mantle: 456262X (600lbs/726kg) Liner: 45634 X (743lbs/7kg) Mantle: 456262X (600lbs/726kg) Liner: 45645X (6lbs/47kg) /4 (234.mm) 3/ (23.mm) 0 / (257.mm) 0 /4 7 (6.mm) 7 (6.mm) (22.6mm) /2 (24.3mm) (244.4mm) 0 3/ (263.5mm) 0 /2 (266.7mm) /4 (3.7mm) /4 (22.6mm) 3/ (23.mm) /4 (3.7mm) Product Range: to 2 /2 Pinion Speed: 50RPM Reduction Ratio: 4: to : Max. (ased on no bowl float. If (274.6mm) 0 (254mm) 0 (273mm) (27.4mm) /2 (3.mm) (44.4mm) Product Range: to /2 Pinion Speed: 50RPM Reduction Ratio: 4: to : Max. (ased on no bowl float. If /2 (25.mm) (244.4mm) (250.mm) /2 (3.mm) (44.4mm) 0 /4 /4 (25.mm) 2 (50.mm) K300 + Medium hamber with Feed Slots K300 + Medium hamber Mantle: 456262X (600lbs/726kg) Liner: 45636X (7lbs/4kg) Mantle: 456262X (600lbs/726kg) Liner: 45635X (62lbs/45kg) 7 (200mm) (225.4mm) (22.6mm) 6 /2 (65.mm) 6 (6.2mm) 7 (3.7mm) 7 (6.mm) / (206.4mm) / (23.mm) 6 (7.4mm) 7 (200mm) Product Range: to Reduction Ratio: 3: to 6: Max. (ased on no bowl float. If /4 (20.5) /2 (25.) /4 (234.mm) /2 (24.3mm) /4 (3.mm) Product Range: to Reduction Ratio: 3: to 6: Max. (ased on no bowl float. If 6 (74.6mm) 7 / (0.mm) /4 /4 (3.7mm)
K300 + Liners K300 + Medium Fine hamber K300 + Fine hamber Mantle: 456262X (600lbs/726kg) Liner: 45637X (43lbs/36kg) Mantle: 456322X (604lbs/72kg) Liner: 4563X 657lbs/752kg) 3 (2mm) 3 (5.3mm) 5 / (30.2mm) 5 /4 (33.3mm) /2 (2.7mm) 2 (6.mm) 2 () 4 3/ (.mm) 4 /2 (4.3mm) /4 (6.4mm) 3/ (.5mm) 3 (.4mm) 5 3/ (36.5mm) 3 (76.2mm) 4 (7.5mm) /2 (2.7mm) Product Range: /2 to Reduction Ratio: 3: to 6: Max. (ased on no bowl float. If 4 (0.6mm) 4 / (04.) 5 /2 (3.7mm) 5 (42.mm) Product Range: 3/ to Reduction Ratio: 3: to 6: Max. (ased on no bowl float. If 3 / (7.4mm) 3 /4 (2.5mm) 3 3/ (5.7mm) 4 (20.7mm) 4 (23.mm) 5 (27mm) K400 + Liners K400 + oarse hamber K400 + Medium hamber with Feed Slots Mantle: 546034X (2235lbs/04kg) Liner: 546745X (2477lbs/24kg) Mantle: 546034X (2235lbs/04kg) Liner: 546747X (226lbs/026kg) 0 /4 0 3/ (263.5mm) /2 () (25.3mm) / (206.3mm) /4 /2 (24.3mm) (244.4mm) Product Range: to 2 /2 Pinion Speed: 50RPM Reduction Ratio: 4: to : Max. (ased on no bowl float. If 0 /2 (266.7mm) 0 (273.mm) / (22.6mm) 3/ (2.mm) (2.4mm) 2 (304.mm) 2 /4 (3.2mm) 2 /2 (37.5mm) /4 (3.7mm) /2 (3.mm) (44.4mm) Product Range: to /4 Reduction Ratio: 3: to 6: Max. (ased on no bowl float. If 3/ (22.7mm) /2 (25.mm) (274.6mm) (250.mm) 0 /4 /4 (3.7mm) /2 (22.mm) 2 (323.mm) 2 (50.mm) K400 + Medium hamber K400 + Medium Fine hamber Mantle: 546034X (2235lbs/04kg) Liner: 546746X (2665lbs/20kg) Mantle: 546034X (2235lbs/04kg) Liner: 54674X (260lbs/4kg) 6 (6.2mm) 6 (7.4mm) / (206.3mm) /4 3 /2 (.mm) 3 (5.3mm) 5 /4 (33.4mm) 5 3/ (35.5mm) /2 (2.7mm) 6 (74.6mm) 3/ (22.7mm) 3 (.4mm) 5 /2 (3.7mm) Product Range: to /4 Reduction Ratio: 3: to 6: Max. (ased on no bowl float. If 7 (77.mm) 7 3/ (7.3mm) /2 (25.mm) /4 (3.7mm) Product Range: / to Pinion Speed: 00-50 RPM Reduction Ratio: 3: to 6: Max. (ased on no bowl float. If 4 (0.6mm) 4 / (04.mm) 5 (46mm) 5 (4.2mm) K400 + Fine hamber Mantle: 54603X (2235lbs/04kg) Liner: 54674X (25lbs/74kg) 2 / (54mm) 2 /4 (57.2mm) 3 (.4mm) 4 (0.6mm) /4 (6.3mm) 3/ (.5mm) 2 3/ (60.3mm) 4 / (04.mm) /2 (2.7mm) Product Range: /4 to Pinion Speed: 50RPM Reduction Ratio: 3: to 6: Max. (ased on no bowl float. If 2 /2 (63.5mm) 2 (66.7mm) 4 /4 (07.mm) 4 3/ (.mm) FOR MORE INFORMTION LL -00-34-4656 ND SK FOR JI EQUIPMENT SPEILIST Note: Specifications are subject to change without notice. ecause KPI-JI may use in its catalog & literature, field photographs of its products which may have been modified by the owners, products furnished by KPI-JI may not necessarily be as illustrated therein. lso continuous design progress makes it necessary that specifications be subject to change without notice. ll sales of the products of KPI-JI are subject to the provisions of its standard warranty. KPI-JI does not warrant or represent that its products meet any federal, state, or local statutes, codes, ordinances, rules, standards or other regulations, including OSH and MSH, covering safety, pollution, electrical wiring, etc. ompliance with these statutes and regulations is the responsibility of the user and will be dependent upon the area and the use to which the product is put by the user. In some photographs, guards may have been removed for illustrative purposes only. This equipment should not be operated without all guards attached in their normal position. Placement of guards and other safety equipment is often dependent upon the area and how the product is used. safety study should be made by the user of the application, and, if required additional guards, warning signs and other safety devices should be installed by the user, wherever appropriate before operating the products 6470 Franklin lvd, Eugene, OR 7405-00-34-4656 Fax: 54--40 Email: mail@jcieug.com www.kpijci.com Kodiak + Liners Spec Sheet, Rev 0,07/0 Printed in US
Kodiak + Series one rusher Production apacities and Gradation Specifications Open ircuit apacities in Tons-Per-Hour LOSED SIDE SETTINGS (SS) K200+ GROSS K300+ GROSS K400+ GROSS /2" (3 mm) 25-65 (3-50 70-20 (54-20-260 (-236 " (6 mm) 40-5 (27-77 0-240 (72-2 250-35 (227-26 " ( mm) 65-220 (50-200 25-270 (5-245 20-365 (263-33 " (22 mm) 0-245 (63-222 240-300 (2-272 35-35 (26-35 " (25 mm) 220-320 (200-20 270-330 (245-2 340-425 (30-36 /4" (32 mm) 240-345 (2-33 30-35 (2-350 405-505 (367-45 /2" (3 mm) 260-365 (236-33 330-45 (2-376 440-550 (3-4 " (44 mm) 260-365 (236-33 350-440 (3-3 475-55 (43-540 2" (5 mm) 270-35 (245-350 370-460 (335-435 500-625 (454-567 losed ircuit apacities in Tons-Per-Hour K200+ GROSS K300+ GROSS K400+ GROSS K200+ NET K300+ NET K400+ NET 5-45 (04-32 30-65 (-50 65-200 (50-7-22 (- 0-40 (00-27 40-70 (27-54 44-0 (3-72 70-20 (54-20-260 (-236 6-52 (05-3 45-7 (32-62 7-22 (6-200 65-220 (50200 0-240 (72-2 250-35 (227-26 32-76 (20-60 62-204 (47-5 22-26 (2-243 5-250 (6-227 25-270 (5-245 20-365 (263-33 4-200 (34-7-224 (6-203 24-303 (2-275 205-275 (6-250 240-300 (2-272 35-35 (26-35 52-204 (3-5 2-240 (74-27 252-36 (22-27 225-300 (204-272 270-330 (245-2 340-425 (30-36 62-26 (47-6 23-26 (3-237 26-336 (224-305 245-320 (222-20 30-35 (2-350 425-505 (36-45 74-277 (5-25 223-277 (202-25 22-364 (265-330 LOSED SIDE SETTINGS (SS) K200+ REIRULTING LOD K300+ REIRULTING LOD K400+ REIRULTING LOD 3/" (0 mm) /2" (3 mm) " (6 mm) " ( mm) " (22 mm) " (25 mm) /4" (32 mm) 6% 20% 20% 20% 26% 2% 2% 5% 5% 5% 7% 20% 2% 2% 5% 5% 5% 7% 20% 2% 2% Minimum closed side setting is the closet setting possible that does not induce bowl float. ctual minimum closed side setting and production numbers will vary from pit to pit and are influenced by such factors as nature of feed material, ability to screen out fines, manganese condition, and low relief system pressure. IMPORTNT: Estimated results may differ from published data due to variations in operating conditions and application of crushing and screening equipment. This information does not constitute an expressed or implied warranty, but shows estimated performance based on machine operation within recommended design parameters. Use this information for estimating purposes only.
Kodiak + Product Gradation Product size rusher closed side setting 5/6" 7.mm 3/".5mm 7/6". /2" 2.7mm " 5.mm " mm " 22.2mm " 25.4mm -/4" 3.7mm -/2" 3.mm -" 44.5mm 2" 50.mm 4" 0.6mm 3-/2".mm 3" 76.2mm 2-" 6.mm 2-/2" 63.5mm 2-/4" 57.mm 2" 50.mm -" 44.5mm -/2" 3.mm -/4" 3.7mm " 25.4mm " 22.2mm " mm " 5.mm /2" 2.7mm 3/".mm 5/6" 7.mm /4" 6.4mm 00 00 6 00 5 0 2 6 00 5 7 3 74 00 4 6 76 65 00 7 7 66 55 00 6 0 6 56 45 00 7 0 3 70 56 46 3 00 0 2 72 5 45 36 2 00 3 6 74 64 4 3 30 25 00 7 4 7 0 65 54 40 32 26 2 4 7 0 6 55 46 34 2 22 00 5 0 6 5 47 3 2 23 6 4 73 63 52 44 37 2 2 7 4 2 5 74 63 54 46 37 3 25 5 3 0 74 6 50 44 36 32 26 2 6 3 4M 5 4 42 35 32 26 2 4 7 5/32" 3.mm 50 4 36 30 2 23 5 2 0 6 M 40 35 30 26 24 20 6 2 7 5 4 0M 35 3 26 22 20 4 0 6 4 3 6M 2 24 2 7 5 3 0 6 4 3 2 30M 20 5 6 5 4 3 2.5 40M 5 4 0 7 5 4 3 2.5 50M 4 2 2 7 6 4 3 2.5 0. 00M 7 6 5 4 3.5 0.5 0.5 200M 7 6 6 5 4 3 2 0.5 0.5 0.3 FOR MORE INFORMTION LL -00-34-4656 ND SK FOR JI EQUIPMENT SPEILIST Note: Specifications are subject to change without notice. ecause KPI-JI may use in its catalog & literature, field photographs of its products which may have been modified by the owners, products furnished by KPI-JI may not necessarily be as illustrated therein. lso continuous design progress makes it necessary that specifications be subject to change without notice. ll sales of the products of KPI-JI are subject to the provisions of its standard warranty. KPI-JI does not warrant or represent that its products meet any federal, state, or local statutes, codes, ordinances, rules, standards or other regulations, including OSH and MSH, covering safety, pollution, electrical wiring, etc. ompliance with these statutes and regulations is the responsibility of the user and will be dependent upon the area and the use to which the product is put by the user. In some photographs, guards may have been removed for illustrative purposes only. This equipment should not be operated without all guards attached in their normal position. Placement of guards and other safety equipment is often dependent upon the area and how the product is used. safety study should be made by the user of the application, and, if required additional guards, warning signs and other safety devices should be installed by the user, wherever appropriate before operating the products 6470 Franklin lvd, Eugene, OR 7405-00-34-4656 Fax: 54--40 Email: mail@jcieug.com www.kpijci.com Kodiak + apacites and Gradation, Rev 0,07/0 Printed in US