Hyster H40-70FT Lift Truck Dimensions 21 Dual Tread 63.0 (1597) Standard Tread 45.6 (1157) 44.9 (1140) Wide Tread 52.6 (1336) 2 18 Equal Intersecting Right Angle Aisle with 42.0 (1067) Wide Load and 48.0 (1219) Long Load: H40FT 79.8 (2027) H50FT 81.0 (2056) H60FT 82.6 (2099) H70FT 84.3 (2142) 22 15 15 For 90 Stacking Aisle, Add Outside Turning Radius 21 Plus Dimension 22 Plus Load Length. TRUCK LIFT CAPACITY LOAD CENTER F G J L MODEL lb. (kg) in. (mm) Percent Percent in. (mm) in. (mm) H40FT 4000 (1814) 24.0 (610) 48% 25.3% 27.6 (702) 15.0 (382) H50FT 5000 (2268) 24.0 (610) 44% 25.3% 27.6 (702) 15.0 (382) H60FT 6000 (2721) 24.0 (610) 52% 28.0% 28.6 (727) 16.0 (407) H70FT 7000 (3175) 24.0 (610) 54% 28.0% 28.6 (727) 16.0 (407) 10 Head Clearance When Seat Is In Depressed Position (see chart lower left) Standard OHG H40-50FT - 85.0 (2160) H60-70FT - 86.0 (2185) Optional OHG H40-50FT - 82.4 (2093) H60-70FT - 83.4 (2142) 11 Optional 11 Standard J L F H40-50FT 42.3 (1075) H60-70FT 43.4 (1102) Seat Type Standard OHG Optional OHG Non-Suspension 42.0 (1067) 39.4 (1001) Semi-Suspension 42.5 (1079) 39.9 (1013) Full-Suspension 42.0 (1067) N/A Swivel Full-Suspension 41.8 (1061) N/A 37 22 35 38 16 G Tow Pin H40-50FT - 14.4 (365) H60-70FT - 15.4 (390) Circled dimensions correspond to the line numbers on the tabulated chart inside the Technical Guide. Dimensions are in inches (millimeters). Truck shown with optional equipment - strobe, light package and TouchPoint e-hydraulics with adjustable armrest.
Hyster H40FT Lift Truck Dimensions 3 POWERTRAIN TIRES & WHLS WEIGHT PERFORMANCE DIMENSIONS GENERAL 1 Manufacturer Name Hyster Company Hyster Company Hyster Company Hys 2 Model H40FT H40FT H40FT Manufacturer Designation Fortis Package Fortis Package Fortis Package Fortis Transmission Electronic Powershift Electronic Powershift Electronic Powershift Du Engine Mazda 2.0L Mazda 2.0L Yanmar 2.6L M 3 Rated Capacity lb. (kg) 4000 (1815) 4000 (1815) 4000 (1815) 40 4 Load Center, Distance in. (mm) 24.0 (610) 24.0 (610) 24.0 (610) 2 5 Power Type - Gasoline, LPG, Diesel LP Gas Diesel 6 Operator Type Sit-Down Rider Sit-Down Rider Sit-Down Rider Sit- 7 Step Height in. (mm) 15.0 (382) 15.0 (382) 15.0 (382) 1 8 Tire Type - Cushion, Solid, Pneumatic Pneumatic Pneumatic Pneumatic P 9 Wheels, Number - Front / Rear 2x / 2 2x / 2 2x / 2 10 Lift Height, Top of Fork (TOF) in. (mm) 129.0 (3292) 129.0 (3292) 129.0 (3292) 12 11 Lift Heights, Standard Limited Free Lift (LFL) with LBR (TOF) in. (mm) 5.0 (140) 5.0 (140) 5.0 (140) Lift Heights, Optional Full Free Lift (FFL) with LBR (TOF) in. (mm) 61.0 (1565) 61.0 (1565) 61.0 (1565) 6 12 Standard Carriage Width in. (mm) 42.0 (1067) 42.0 (1067) 42.0 (1067) 4 13 Forks, Thickness x Width x Length in. 1.6 X 3.9 X 42.0 1.6 X 3.9 X 42.0 1.6 X 3.9 X 42.0 1.6 Forks, Thickness x Width x Length (mm) (40 X 100 X 1067) (40 X 100 X 1067) (40 X 100 X 1067) (40 X 14 Fork Spread, Outside Dimensions in. (mm) 43.3 (1099) 43.3 (1099) 43.3 (1099) 4 15 Mast Tilt Angles, Forward / Backward Degrees 6F / 10B 6F / 10B 6F / 10B 16 Length To Face of Forks in. (mm) 98.0 (2486) 98.0 (2486) 98.0 (2486) 9 17 Overall Width, Standard Tread in. (mm) 45.6 (1157) 45.6 (1157) 45.6 (1157) 4 Overall Width, Wide Tread in. (mm) 52.6 (1336) 52.6 (1336) 52.6 (1336) 5 18 Height, Standard Mast - Lowered in. (mm) 86.0 (2170) 86.0 (2170) 86.0 (2170) 8 19 Height, Standard Mast - Extended with LBR in. (mm) 147.0 (3715) 147.0 (3715) 147.0 (3715) 14 Height, Standard Mast - Extended without LBR in. (mm) 123.0 (3100) 123.0 (3100) 123.0 (3100) 12 20 Height, Standard Overhead Guard in. (mm) 85.0 (2160) 85.0 (2160) 85.0 (2160) 8 Height, Optional Overhead Guard in. (mm) 82.4 (2093) 82.4 (2093) 82.4 (2093) 8 21 Turning Radius, Minimum Outside (OTR) in. (mm) 84.6 (2149) 84.6 (2149) 84.6 (2149) 8 22 Length, Center of Wheel to Face of Forks in. (mm) 18.5 (471) 18.5 (471) 18.5 (471) 1 23 Aisle Width, Right Angle Stack (Add Length of Load) in. (mm) 103.1 (2619) 103.1 (2619) 103.1 (2619) 10 24 Equal Aisle, 90-Degree Intersecting Aisle in. (mm) 79.8 (2027) 79.8 (2027) 79.8 (2027) 7 25 Travel Speed, Standard Transmission RL/NL mph (km / h) 10.6 / 11.2 10.6 / 11.2 10.5 / 11.2 1 Travel Speed, DuraMatch Plus2 Transmission RL/NL mph (km / h) N/A N/A N/A 26 Lift Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 111.0 (.56) / 113.0 (.57) 111.0 (.56) / 113.0 (.57) 131.0 (.67) / 134.0 (.68) 111.0 (. Lift Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 99.0 (.50) / 101.0 (.51) 99.0 (.50) / 101.0 (.51) 118.0 (.60) / 120.0 (.61) 99.0 (.5 Lift Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 105.0 (.53) / 107.0 (.54) 105.0 (.53) / 107.0 (.54) 125.0 (.64) / 127.0 (.65) 105.0 (. 27 Lowering Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (. Lowering Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (. Lowering Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 98.0 (.50) / 83.0 (.42) 98.0 (.50) /83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (. 28 Drawbar Pull, Standard Transmission @ 1 mph RL/NL lb. (kg) 3144 (14.0) / 2715 (12.1) 3692 (16.4) / 2715 (12.1) 3919 (17.4) / 2600 (11.6) 3806 (16 Drawbar Pull, DuraMatch Plus2 @ 1 mph RL/NL lb. (kg) N/A N/A N/A Drawbar Pull, Standard Transmission @ 3 mph RL/NL lb. (kg) 1975 (8.8) / 2000 (8.9) 2373 (10.6) / 2506 (11.2) 2650 (11.6) / 2660 (11.8) 2500 (11 Drawbar Pull, DuraMatch Plus2 @ 3 mph RL/NL lb. (kg) N/A N/A N/A 29 Gradeability, Standard Transmission @ 1 mph RL/NL Percent % 25.3 / 34.1 30.1 / 34.2 33.2 / 34.2 3 Gradeability, DuraMatch Plus2 @ 1 mph RL/NL Percent % N/A N/A N/A Gradeability, Standard Transmission @ 3 mph RL/NL Percent % 15.0 / 24.5 19.0 / 30.0 21.3 / 34.2 1 Gradeability, DuraMatch Plus2 @ 3 mph RL/NL Percent % N/A N/A N/A 31 Weight, Stardard Truck (2-Stg. LFL 86 / 129) NL lb. (kg.) 7968 (3622) 7968 (3622) 7968 (3622) 79 Weight, Stardard Truck (2-Stg. LFL 86 / 129) RL lb. (kg.) 11968 (5440) 11968 (5440) 11968 (5440) 11 32 Axle Loading, Static Front / Rear NL lb. (kg.) 4097 (1862) / 3856 (1752) 4097 (1862) / 3856 (1752) 4097 (1862) / 3856 (1752) 4097 (18 Axle Loading, Static Front / Rear RL lb. (kg.) 10760 (4891) / 1193 (542) 10760 (4891) / 1193 (542) 10760 (4891) / 1193 (542) 10760 (4 33 Tire Size, Front 7.00 X 12-12 7.00 X 12-12 7.00 X 12-12 7.0 34 Tire Size, Rear 6.00 X 9 6.00 X 9 6.00 X 9 35 Wheelbase in. (mm) 63.9 (1623) 63.9 (1623) 63.9 (1623) 6 37 Ground Clearance, Lowest Point NL (with RL subtract -6mm) in. (mm) 5.2 (132) 5.2 (132) 5.2 (132) 38 Ground Clearance, Center of Wheelbase NL in. (mm) 6.3 (160) 6.3 (160) 6.3 (160) 39 Service / Parking - Method of Control Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foo 40 Service / Parking - Method of Operation Hand / Mechanical Hand / Mechanical Hand / Mechanical Hand 41 Battery Type Maintenance Free Maintenance Free Maintenance Free Main 42 Volts / Cold Cranking Amps v / cca 12 / 475 12 / 475 12 / 770 43 Engine, Manufacturer / Model Mazda FE Mazda FE Yanmar M 44 Permanent Output hp 40 46 48 45 Torque @ Rated RPM ft.lbs. (kgm) 91.0 (12.6) @ 1800 RPM 104.0 (14.4) @ 1800 RPM 108.0 (14.9) @1400 RPM 108.0 (1 46 Number of Cylinders / Displacement No. / cc (ci) 4 / 1998 (122) 4 / 1998 (122) 4 / 2659 (162) 4 / 47 Transmission Type, Standard Electronic Powershift Electronic Powershift Electronic Powershift Du Standard Speeds Fwd-Rev Optional Speeds Fwd-Rev 1-1 N/A 1-1 N/A 1-1 N/A 1 48 Noise Level, LEQ db(a) 78 78 78 49 Hydraulic Tank Capacity (Drain and Refill) gal. (litre) 10.5 (39.7) 10.5 (39.7) 10.5 (39.7) 1 50 Fuel Tank Capacity (Gasoline-Powered Units Only) gal. (litre) 13.9 (52.7) 13.9 (52.7) 13.9 (52.7) 1 51 Auxillary Hydraulic Pressure Relief for Attachments PSI (Mpa) 2250 (15.5) 2250 (15.5) 2250 (15.5) 2
CERTIFICATION: These Hyster lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck. NOTE: Performance specifications / ratings are for truck equipped as described under Standard Equipment in this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature and condition of the operating area. Specifications are subject to change and the proposed application should be discussed with your authorized Hyster Company Dealer. Limited by traction. For further information on this dimension, please contact your local Hyster Company dealer. ter Company Hyster Company Hyster Company Hyster Company Hyster Company Hyster Company H40FT H40FT H40FT H40FT H40FT H40FT Advance Package Fortis Advance Package Fortis Advance Package Fortis Advance + Package Fortis Advance + Package Fortis Advance + Package ramatch DuraMatch DuraMatch DuraMatch Plus (standard) or DuraMatch Plus2 (optional) azda 2.2L Mazda 2.2L Yanmar 2.6L GM 2.4L GM 2.4L Yanmar 3.3L 00 (1815) 4000 (1815) 4000 (1815) 4000 (1815) 4000 (1815) 4000 (1815) 4.0 (610) 24.0 (610) 24.0 (610) 24.0 (610) 24.0 (610) 24.0 (610) LP Gas Diesel LP Gas Diesel Down Rider Sit-Down Rider Sit-Down Rider Sit-Down Rider Sit-Down Rider Sit-Down Rider 5.0 (382) 15.0 (382) 15.0 (382) 15.0 (382) 15.0 (382) 15.0 (382) neumatic Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic 2x / 2 2x / 2 2x / 2 2x / 2 2x / 2 2x / 2 9.0 (3292) 129.0 (3292) 129.0 (3292) 129.0 (3292) 129.0 (3292) 129.0 (3292) 5.0 (140) 5.0 (140) 5.0 (140) 5.0 (140) 5.0 (140) 5.0 (140) 1.0 (1565) 61.0 (1565) 61.0 (1565) 61.0 (1565) 61.0 (1565) 61.0 (1565) 2.0 (1067) 42.0 (1067) 42.0 (1067) 42.0 (1067) 42.0 (1067) 42.0 (1067) X 3.9 X 42.0 1.6 X 3.9 X 42.0 1.6 X 3.9 X 42.0 1.6 X 3.9 X 42.0 1.6 X 3.9 X 42.0 1.6 X 3.9 X 42.0 100 X 1067) (40 X 100 X 1067) (40 X 100 X 1067) (40 X 100 X 1067) (40 X 100 X 1067) (40 X 100 X 1067) 3.3 (1099) 43.3 (1099) 43.3 (1099) 43.3 (1099) 43.3 (1099) 43.3 (1099) 6F / 10B 6F / 10B 6F / 10B 6F / 10B 6F / 10B 6F / 10B 8.0 (2486) 98.0 (2486) 98.0 (2486) 98.0 (2486) 98.0 (2486) 98.0 (2486) 5.6 (1157) 45.6 (1157) 45.6 (1157) 45.6 (1157) 45.6 (1157) 45.6 (1157) 2.6 (1336) 52.6 (1336) 52.6 (1336) 52.6 (1336) 52.6 (1336) 52.6 (1336) 6.0 (2170) 86.0 (2170) 86.0 (2170) 86.0 (2170) 86.0 (2170) 86.0 (2170) 7.0 (3715) 147.0 (3715) 147.0 (3715) 147.0 (3715) 147.0 (3715) 147.0 (3715) 3.0 (3100) 123.0 (3100) 123.0 (3100) 123.0 (3100) 123.0 (3100) 123.0 (3100) 5.0 (2160) 85.0 (2160) 85.0 (2160) 85.0 (2160) 85.0 (2160) 85.0 (2160) 2.4 (2093) 82.4 (2093) 82.4 (2093) 82.4 (2093) 82.4 (2093) 82.4 (2093) 4.6 (2149) 84.6 (2149) 84.6 (2149) 84.6 (2149) 84.6 (2149) 84.6 (2149) 8.5 (471) 18.5 (471) 18.5 (471) 18.5 (471) 18.5 (471) 18.5 (471) 3.1 (2619) 103.1 (2619) 103.1 (2619) 103.1 (2619) 103.1 (2619) 103.1 (2619) 9.8 (2027) 79.8 (2027) 79.8 (2027) 79.8 (2027) 79.8 (2027) 79.8 (2027) 0.6 / 11.2 10.6 / 11.2 10.5 / 11.2 10.9 / 11.6 10.9 / 11.6 11.3 / 12.0 N/A N/A N/A 11.6 / 12.2 11.6 / 12.2 11.3 / 12.0 56) / 113.0 (.57) 111.0 (.56) / 113.0 (.57) 131.0 (.67) / 134.0 (.68) 119.0 (.60) / 121.0 (.61) 119.0 (.60) / 121.0 (.61) 136.0 (.70) / 139.0 (0.71) 0) / 101.0 (.51) 99.0 (.50) / 101.0 (.51) 118.0 (.60) / 120.0 (.61) 106.0 (.54) / 108.0 (.55) 106.0 (.54) / 108.0 (.55) 122.0 (.62) / 124.0 (.63) 53) / 107.0 (.54) 105.0 (.53) / 107.0 (.54) 125.0 (.64) / 127.0 (.65) 113.0 (.57) / 115.0 (.58) 113.0 (.57) / 115.0 (.58) 129.0 (.66) / 132.0 (.67) 50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42).9) / 2715 (12.1) 4057 (18.0) / 2715 (12.1) 3919 (17.4) / 2600 (11.6) 4415 (20.1) / 2715 (12.0) 4427 (19.7) / 2715 (12.0) 5148 (22.9) / 2600 (11.6) N/A N/A N/A 4900 (21.8) / 2715 (12.0) 4900 (21.8) / 2715 (12.0) 4900 (21.8) / 2600 (11.6).2) / 2500 (11.2) 2750 (12.2) / 2715 (12.1) 2650 (11.6) / 2600 (11.6) 3000 (13.3) / 2715 (12.0) 3000 (13.3) / 2715 (12.0) 3900 (17.3) / 2600 (11.6) N/A N/A N/A 4900 (21.8) / 2715 (12.0) 4900 (21.8) / 2715 (12.0) 4500 (20.0) / 2600 (11.6) 1.1 / 34.2 33.4 / 34.2 33.2 / 34.2 37.0 / 34.2 37.0 / 34.2 45.4 / 34.2 N/A N/A N/A 41.0 / 34.2 41.0 / 34.2 42.8 / 34.2 9.0 / 29.8 21.0 / 34.2 21.3 / 34.2 24.0 / 34.2 23.0 / 34.2 34.0 / 34.2 N/A N/A N/A 30.0 / 34.2 30.0 / 34.2 32.0 / 34.3 68 (3622) 7968 (3622) 7968 (3622) 7968 (3622) 7968 (3622) 7968 (3622) 968 (5440) 11968 (5440) 11968 (5440) 11968 (5440) 11968 (5440) 11968 (5440) 62) / 3856 (1752) 4097 (1862) / 3856 (1752) 4097 (1862) / 3856 (1752) 4097 (1862) / 3856 (1752) 4097 (1862) / 3856 (1752) 4097 (1862) / 3856 (1752) 891) / 1193 (542) 10760 (4891) / 1193 (542) 10760 (4891) / 1193 (542) 10760 (4891) / 1193 (542) 10760 (4891) / 1193 (542) 10760 (4891) / 1193 (542) 0 X 12-12 7.00 X 12-12 7.00 X 12-12 7.00 X 12-12 7.00 X 12-12 7.00 X 12-12 6.00 X 9 6.00 X 9 6.00 X 9 6.00 X 9 6.00 X 9 6.00 X 9 3.9 (1623) 63.9 (1623) 63.9 (1623) 63.9 (1623) 63.9 (1623) 63.9 (1623) 5.2 (132) 5.2 (132) 5.2 (132) 5.2 (132) 5.2 (132) 5.2 (132) 6.3 (160) 6.3 (160) 6.3 (160) 6.3 (160) 6.3 (160) 6.3 (160) t / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic / Mechanical Hand / Mechanical Hand / Mechanical Hand / Mechanical Hand / Mechanical Hand / Mechanical tenance Free Maintenance Free Maintenance Free Maintenance Free Maintenance Free Maintenance Free 12 / 475 12 / 475 12 / 770 12 / 475 12 / 475 12 / 770 azda F2 Mazda F2 Yanmar GM GM Yanmar 46 50 48 62 62 65 4.9) @ 1800 RPM 115.0 (15.9) @ 1800 RPM 108.0 (14.9) @ 1400 RPM 123.0 (17.0) @ 2650 RPM 124.0 (17.1) @ 2650 RPM 155.0 (21.4) @ 1700 RPM 2184 (133) 4 / 2184 (133) 4 / 2659 (162) 4 / 2405 (147) 4 / 2405 (147) 4 / 3319 (202) ramatch DuraMatch DuraMatch DuraMatch Plus DuraMatch Plus DuraMatch Plus -1 N/A 1-1 N/A 1-1 N/A 1-1 2-1 1-1 2-1 1-1 2-1 78 78 78 78 78 78 0.5 (39.7) 10.5 (39.7) 10.5 (39.7) 10.5 (39.7) 10.5 (39.7) 10.5 (39.7) 3.9 (52.7) 13.9 (52.7) 13.9 (52.7) 13.9 (52.7) 13.9 (52.7) 13.9 (52.7) 250 (15.5) 2250 (15.5) 2250 (15.5) 2250 (15.5) 2250 (15.5) 2250 (15.5)
5 POWERTRAIN TIRES & WHLS WEIGHT PERFORMANCE DIMENSIONS GENERAL Hyster H50FT Lift Truck Dimensions 1 Manufacturer Name Hyster Company Hyster Company Hyster Company Hyster Company Hy 2 Model H50FT H50FT H50FT H50FT Manufacturer Designation Fortis Package Fortis Package Fortis Package Fortis + Package Fortis Transmission Electronic Powershift Electronic Powershift Electronic Powershift Electronic Powershift D Engine Mazda 2.0L Mazda 2.0L Yanmar 2.6L Mazda 2.2L 3 Rated Capacity lb. (kg) 5000 (2268) 5000 (2268) 5000 (2268) 5000 (2268) 4 Load Center Distance in. (mm) 24.0 (610) 24.0 (610) 24.0 (610) 24.0 (610) 5 Power Type - Gasoline, LPG, Diesel LP Gas Diesel LP 6 Operator Type Sit-Down Rider Sit-Down Rider Sit-Down Rider Sit-Down Rider 7 Step Height in. (mm) 15.0 (382) 15.0 (382) 15.0 (382) 15.0 (382) 8 Tire Type - Cushion, Solid, Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic 9 Wheels Number - Front / Rear 2x / 2 2x / 2 2x / 2 2x / 2 10 Lift Height, Top of Fork (TOF) in. (mm) 129 (3292) 129 (3292) 129 (3292) 129 (3292) 11 Lift Heights, Standard Limited Free Lift (LFL) with LBR (TOF) in. (mm) 5 (140) 5 (140) 5 (140) 5 (140) Lift Heights, Optional Full Free Lift (FFL) with LBR (TOF) in. (mm) 61 (1565) 61 (1565) 61 (1565) 61 (1565) 12 Standard Carriage Width in. (mm) 42.0 (1067) 42.0 (1067) 42.0 (1067) 42.0 (1067) 13 Forks, Thickness x Width x Length in. 1.6 X 3.9 X 42.0 1.6 X 3.9 X 42.0 1.6 X 3.9 X 42.0 1.6 X 3.9 X 42.0 Forks, Thickness x Width x Length (mm) (40 X 100 X 1067) (40 X 100 X 1067) (40 X 100 X 1067) (40 X 100 X 1067 14 Fork Spread, Outside Dimensions in. (mm) 43.3 (1099) 43.3 (1099) 43.3 (1099) 43.3 (1099) 15 Mast Tilt Angles, Forward / Backward Degrees 6F / 10B 6F / 10B 6F / 10B 6F / 10B 16 Length To Face of Forks in. (mm) 100.7 (2559) 100.7 (2559) 100.7 (2559) 100.7 (2559) 17 Overall Width, Standard Tread in. (mm) 45.6 (1157) 45.6 (1157) 45.6 (1157) 45.6 (1157) Overall Width, Wide Tread in. (mm) 52.6 (1336) 52.6 (1336) 52.6 (1336) 52.6 (1336) 18 Height, Standard Mast - Lowered in. (mm) 86 (2170) 86 (2170) 86 (2170) 86 (2170) 19 Height, Standard Mast - Extended with LBR in. (mm) 147 (3715) 147 (3715) 147 (3715) 147 (3715) Height, Standard Mast - Extended without LBR in. (mm) 123 (3100) 123 (3100) 123 (3100) 123 (3100) 20 Height, Standard Overhead Guard in. (mm) 85 (2160) 85 (2160) 85 (2160) 85 (2160) Height, Optional Overhead Guard in. (mm) 82 (2093) 82 (2093) 82 (2093) 82 (2093) 21 Turning Radius, Minimum Outside (OTR) in. (mm) 84.6 (2149) 84.6 (2149) 84.6 (2149) 84.6 (2149) 22 Length, Center of Wheel to Face of Forks in. (mm) 18.5 (471) 18.5 (471) 18.5 (471) 18.5 (471) 23 Aisle Width, Right Angle Stack (Add Length of Load) in. (mm) 105.7 (2686) 105.7 (2686) 105.7 (2686) 105.7 (2686) 24 Equal Aisle, 90-Degree Intersecting Aisle in. (mm) 81.0 (2056) 81.0 (2056) 81.0 (2056) 81.0 (2056) 25 Travel Speed, Standard Transmission RL/NL mph (km / h) 11.2 / 11.9 11.2 / 11.9 11.3 / 11.9 11.2 / 11.9 Travel Speed, DuraMatch Plus2 Transmission RL/NL mph (km / h) N/A N/A N/A N/A 26 Lift Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 111.0 (.56) / 113.0 (.57) 111.0 (.56) / 113.0 (.57) 131.0 (.67) / 134.0 (.68) 111.0 (.56) / 113.0 Lift Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 99.0 (.50) / 101.0 (.51) 99.0 (.50) / 101.0 (.51) 118.0 (.60) / 120.0 (.61) 99.0 (.50) / 101.0 ( Lift Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 105.0 (.53) / 107.0 (.54) 105.0 (.53) / 107.0 (.54) 125.0 (.64) / 127.0 (.65) 105.0 (.53) / 107.0 27 Lowering Speed, Standard 2-Stage LFL RL/NL ft. / min / s) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (. Lowering Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (. Lowering Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (. 28 Drawbar Pull, Standard Transmission @ 1 mph RL/NL lb. (kg) 2948 (13.1) / 2573 (11.4) 3700 (16.5) / 2573 (11.4) 3696 (16.4) / 2573 (11.4) 3835 (17.1) / 2573 ( Drawbar Pull, DuraMatch Plus2 @ 1 mph RL/NL lb. (kg) N/A N/A N/A N/A Drawbar Pull, Standard Transmission @ 3 mph RL/NL lb. (kg) 1900 (8.45) / 2000 (8.9) 2300 (10.2) / 2400 (10.7) 2650 (11.8) / 2500 (11.1) 2400 (10.7) / 2500 ( Drawbar Pull, DuraMatch Plus2 @ 3 mph RL/NL lb. (kg) N/A N/A N/A N/A 29 Gradeability, Standard Transmission @ 1 mph RL/NL Percent % 22.0 / 29.3 26.4 / 29.3 26.2 / 29.3 27.1 / 29.3 Gradeability, DuraMatch Plus2 @ 1 mph RL/NL Percent % N/A N/A N/A N/A Gradeability, Standard Transmission @ 3 mph RL/NL Percent % 13.0 / 22.0 16 / 27.1 21.0 / 29.3 17.5 / 29.0 Gradeability, DuraMatch Plus2 @ 3 mph RL/NL Percent % N/A N/A N/A N/A 31 Weight, Standard Truck (2 Stg. LFL 86 / 129) NL lb. (kg.) 8730 (3969) 8730 (3969) 8730 (3969) 8730 (3969) Weight, Standard Truck (2 Stg. LFL 86 / 129) RL lb. (kg.) 13730 (6241) 13730 (6241) 13730 (6241) 13730 (6241) 32 Axle Loads, Static Front / Rear NL lb. (kg.) 3943 (1792) / 4755 (2161) 3943 (1792) / 4755 (2161) 3943 (1792) / 4755 (2161) 3943 (1792) / 4755 ( Axle Loads, Static Front / Rear RL lb. (kg.) 12271 (5778) / 1427 (649) 12271 (5778) / 1427 (649) 12271 (5778) / 1427 (649) 12271 (5778) / 1427 33 Tire Size, Front 7.00 X 12-12 7.00 X 12-12 7.00 X 12-12 7.00 X 12-12 34 Tire Size, Rear 6.00 X 9 6.00 X 9 6.00 X 9 6.00 X 9 35 Wheelbase in. (mm) 63.9 (1623) 63.9 (1623) 63.9 (1623) 63.9 (1623) 37 Ground Clearance, Lowest Point NL (with RL subtract -6mm) in. (mm) 5.2 (132) 5.2 (132) 5.2 (132) 5.2 (132) 38 Ground Clearance, Center of Wheelbase NL in. (mm) 6.3 (160) 6.3 (160) 6.3 (160) 6.3 (160) 39 Service / Parking - Method of Control Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic 40 Service / Parking - Method of Operation Hand / Mechanical Hand / Mechanical Hand / Mechanical Hand / Mechanic 41 Battery Type Maintenance Free Maintenance Free Maintenance Free Maintenance Fre 42 Volts / Cold Cranking Amps v / cca 12 / 475 12 / 475 12 / 770 12 / 475 43 Engine, Manufacturer Model Mazda FE Mazda FE Yanmar Mazda F2 44 Output hp 40 46 48 46 45 Torque @ Rated RPM ft Lbs. (kgm) 91.0 (12.6) @ 1800 RPM 104.0 (14.4) @ 1800 RPM 108.0 (14.9) @ 1400 RPM 108.0 (14.9) @ 1800 46 Number of Cylinders / Displacement No. / cc (ci) 4 / 1998 (122) 4 / 1998 (122) 4 / 2659 (162) 4 / 2184 (133) 47 Transmission Type, Standard Electronic Powershift Electronic Powershift Electronic Powershift Electronic Powershift Standard Speeds Fwd-Rev Optional Speeds Fwd-Rev Speeds 1-1 N/A 1-1 N/A 1-1 N/A 1-1 N/A 48 Noise Level, LEQ db(a) 78 78 78 78 49 Hydraulic Tank Capacity (Drain & Refill) gal. (litre) 10.5 (39.7) 10.5 (39.7) 10.5 (39.7) 10.5 (39.7) 50 Fuel Tank Capacity (Gasoline & Diesel-Powered Units Only) gal. (litre) 13.9 (52.7) 13.9 (52.7) 13.9 (52.7) 13.9 (52.7) 51 Auxiliary Hydraulic Pressure Relief for Attachments PSI (Mpa) 2250 (15.5) 2250 (15.5) 2250 (15.5) 2250 (15.5)
CERTIFICATION: These Hyster lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck. NOTE: Performance specifications / ratings are for truck equipped as described under Standard Equipment in this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature and condition of the operating area. Specifications are subject to change and the proposed application should be discussed with your authorized Hyster Company Dealer. Limited by traction. For further information on this dimension, please contact your local Hyster Company dealer. Hyster Company Hyster Company Hyster Company Hyster Company Hyster Company Hyster Company Hyster Company H50FT H50FT H50FT H50FT H50FT H50FT H50FT Fortis Advance Package Fortis + Package Fortis Advance Package Fortis Advance Package Fortis Advance+ Package Fortis Advance+ Package Fortis Advance+ Package ft DuraMatch Electronic Powershift DuraMatch DuraMatch DuraMatch Plus (standard) or DuraMatch Plus2 (optional) da 2.2L Mazda 2.2L Yanmar 2.6L GM 2.4L GM 2.4L Yanmar 3.3L (2268) 5000 (2268) 5000 (2268) 5000 (2268) 5000 (2268) 5000 (2268) 0 (610) 24.0 (610) 24.0 (610) 24.0 (610) 24.0 (610) 24.0 (610) LP Gas Diesel LP Gas Diesel wn Rider Sit-Down Rider Sit-Down Rider Sit-Down Rider Sit-Down Rider Sit-Down Rider 0 (382) 15.0 (382) 15.0 (382) 15.0 (382) 15.0 (382) 15.0 (382) umatic Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic x / 2 2x / 2 2x / 2 2x / 2 2x / 2 2x / 2 (3292) 129 (3292) 129 (3292) 129 (3292) 129 (3292) 129 (3292) (140) 5 (140) 5 (140) 5 (140) 5 (140) 5 (140) (1565) 61 (1565) 61 (1565) 61 (1565) 61 (1565) 61 (1565) (1067) 42.0 (1067) 42.0 (1067) 42.0 (1067) 42.0 (1067) 42.0 (1067) 3.9 X 42.0 1.6 X 3.9 X 42.0 1.6 X 3.9 X 42.0 1.6 X 3.9 X 42.0 1.6 X 3.9 X 42.0 1.6 X 3.9 X 42.0 00 X 1067) (40 X 100 X 1067) (40 X 100 X 1067) (40 X 100 X 1067) (40 X 100 X 1067) (40 X 100 X 1067) (1099) 43.3 (1099) 43.3 (1099) 43.3 (1099) 43.3 (1099) 43.3 (1099) / 10B 6F / 10B 6F / 10B 6F / 10B 6F / 10B 6F / 10B 7 (2559) 100.7 (2559) 100.7 (2559) 100.7 (2559) 100.7 (2559) 100.7 (2559) (1157) 45.6 (1157) 45.6 (1157) 45.6 (1157) 45.6 (1157) 45.6 (1157) (1336) 52.6 (1336) 52.6 (1336) 52.6 (1336) 52.6 (1336) 52.6 (1336) (2170) 86 (2170) 86 (2170) 86 (2170) 86 (2170) 86 (2170) (3715) 147 (3715) 147 (3715) 147 (3715) 147 (3715) 147 (3715) (3100) 123 (3100) 123 (3100) 123 (3100) 123 (3100) 123 (3100) (2160) 85 (2160) 85 (2160) 85 (2160) 85 (2160) 85 (2160) (2093) 82 (2093) 82 (2093) 82 (2093) 82 (2093) 82 (2093) (2149) 84.6 (2149) 84.6 (2149) 84.6 (2149) 84.6 (2149) 84.6 (2149) 5 (471) 18.5 (471) 18.5 (471) 18.5 (471) 18.5 (471) 18.5 (471) 7 (2686) 105.7 (2686) 105.7 (2686) 105.7 (2686) 105.7 (2686) 105.7 (2686) (2056) 81.0 (2056) 81.0 (2056) 81.0 (2056) 81.0 (2056) 81.0 (2056) / 11.9 11.2 / 11.9 11.3 / 11.9 11.6 / 12.3 11.6 / 12.3 12.4 / 13.1 N/A N/A N/A 12.3 / 13.0 12.3 / 13.0 13.0 / 13.0 ) / 113.0 (.57) 111.0 (.56) / 113.0 (.57) 131.0 (.67) / 134.0 (.68) 119.0 (.60) / 121.0 (.61) 119.0 (.60) / 121.0 (.61) 129.0 (.66) / 131.0 (.67) / 101.0 (.51) 99.0 (.50) / 101.0 (.51) 118.0 (.60) / 120.0 (.61) 106.0 (.54) / 108.0 (.55) 106.0 (.54) / 108.0 (.55) 118.0 (.60) / 120.0 (.61) ) / 107.0 (.54) 105.0 (.53) / 107.0 (.54) 125.0 (.64) / 127.0 (.65) 113.0 (.57) / 115.0 (.58) 113.0 (.57) / 115.0 (.58) 123.0 (.62) / 125.0 (.63) ) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) ) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) ) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) ) / 2573 (11.4) 4058 (18.1) / 2573 (11.4) 3696 (16.4) / 2573 (11.4) 4277 (19.0) / 2573 (11.4) 4298 (19.1) / 2573 (11.4) 4863 (21.6) / 2573 (11.4) N/A N/A N/A 4900 (21.8) / 2573 (11.5) 4900 (21.8) / 2573 (11.5) 4900 (21.8) / 2573 (11.4) ) / 2500 (11.1) 2550 (11.3) / 2600 (11.6) 2650 (11.8) / 2500 (11.1) 2900 (12.9) / 2573 (11.5) 3000 (13.3) / 2573 (11.5) 3700 (16.5) / 3700 (16.5) N/A N/A N/A 3550 (15.8) / 2573 (11.5) 3550 (15.8) / 2573 (11.5) 4700 (20.9) / 4400(19.6) / 29.3 28.8 / 29.3 26.2 / 29.3 30.5 / 29.3 30.6 / 29.3 35.1 / 29.3 N/A N/A N/A 35.4 / 29.3 35.4 / 29.3 35.4 / 29.3 / 29.0 19.0 / 30.0 21.0 / 29.3 21.0 / 29.3 21.0 / 29.3 26.0 / 29.3 N/A N/A N/A 25.0 / 29.3 25.0 / 29.3 33.8 / 29.3 (3969) 8730 (3969) 8730 (3969) 8730 (3969) 8730 (3969) 8730 (3969) 0 (6241) 13730 (6241) 13730 (6241) 13730 (6241) 13730 (6241) 13730 (6241) ) / 4755 (2161) 3943 (1792) / 4755 (2161) 3943 (1792) / 4755 (2161) 3943 (1792) / 4755 (2161) 3943 (1792) / 4755 (2161) 3943 (1792) / 4755 (2161) 8) / 1427 (649) 12271 (5778) / 1427 (649) 12271 (5778) / 1427 (649) 12271 (5778) / 1427 (649) 12271 (5778) / 1427 (649) 12271 (5778) / 1427 (649) X 12-12 7.00 X 12-12 7.00 X 12-12 7.00 X 12-12 7.00 X 12-12 7.00 X 12-12 0 X 9 6.00 X 9 6.00 X 9 6.00 X 9 6.00 X 9 6.00 X 9 (1623) 63.9 (1623) 63.9 (1623) 63.9 (1623) 63.9 (1623) 63.9 (1623) (132) 5.2 (132) 5.2 (132) 5.2 (132) 5.2 (132) 5.2 (132) (160) 6.3 (160) 6.3 (160) 6.3 (160) 6.3 (160) 6.3 (160) Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Mechanical Hand / Mechanical Hand / Mechanical Hand / Mechanical Hand / Mechanical Hand / Mechanical nance Free Maintenance Free Maintenance Free Maintenance Free Maintenance Free Maintenance Free / 475 12 / 475 12 / 770 12 / 475 12 / 475 12 / 770 zda F2 Mazda F2 Yanmar GM GM Yanmar 46 50 48 62 62 65 ) @ 1800 RPM 115.0 (15.9) @ 1800 RPM 108.0 (14.9) @ 1400 RPM 123.0 (17.0) @ 2650 RPM 124.0 (17.1) @ 2650 RPM 155.0 (21.4) @ 1700 RPM 84 (133) 4 / 2184 (133) 4 / 2659 (162) 4 / 2405 (147) 4 / 2405 (147) 4 / 3319 (202) ift DuraMatch Electronic Powershift DuraMatch DuraMatch DuraMatch Plus DuraMatch Plus DuraMatch Plus N/A 1-1 N/A 1-1 N/A 1-1 2-1 1-1 2-1 1-1 2-1 78 78 78 78 78 78 (39.7) 10.5 (39.7) 10.5 (39.7) 10.5 (39.7) 10.5 (39.7) 10.5 (39.7) (52.7) 13.9 (52.7) 13.9 (52.7) 13.9 (52.7) 13.9 (52.7) 13.9 (52.7) 0 (15.5) 2250 (15.5) 2250 (15.5) 2250 (15.5) 2250 (15.5) 2250 (15.5)
7 POWERTRAIN TIRES & WHLS WEIGHT PERFORMANCE DIMENSIONS GENERAL Hyster H60FT Lift Truck Dimensions 1 Manufacturer Name Hyster Company Hyster Company Hyster Company Hyste 2 Model H60FT H60FT H60FT H 3 Manufacturer Designation Fortis Package Fortis Package Fortis Package Fortis A Transmission Electronic Powershift Electronic Powershift Electronic Powershift Dura Engine Mazda 2.0L Mazda 2.0L Yanmar 2.6L Ma 3 Rated Capacity lb. (kg) 6000 (2722) 6000 (2722) 6000 (2722) 600 4 Load Center, Distance in. (mm) 24.0 (610) 24.0 (610) 24.0 (610) 24 5 Power Type - Gasoline, LPG, Diesel LP Gas Diesel 6 Operator Type Sit-Down Rider Sit-Down Rider Sit-Down Rider Sit-D 7 Step Height in. (mm) 16.0 (407) 16.0 (407) 16.0 (407) 16 8 Tire Type - Cushion, Solid, Pneumatic Pneumatic Pneumatic Pneumatic Pn 9 Wheels, Number - Front / Rear 2x / 2 2x / 2 2x / 2 10 Lift Height, Top of Fork (TOF) in. (mm) 126 (3209) 126 (3209) 126 (3209) 12 11 Lift Heights, Standard Limited Free Lift (LFL) with LBR (TOF) in. (mm) 5 (140) 5 (140) 5 (140) 5 Lift Heights, Optional Full Free Lift (FFL) with LBR (TOF) in. (mm) 58 (1490) 58 (1490) 58 (1490) 58 12 Standard Carriage Width in. (mm) 42.0 (1067) 42.0 (1067) 42.0 (1067) 42. 13 Forks, Thickness x Width x Length in. 2.0 X 4.9 X 42.0 2.0 X 4.9 X 42.0 2.0 X 4.9 X 42.0 2.0 X Forks, Thickness x Width x Length (mm) (50 X 125 X 1067) (50 X 125 X 1067) (50 X 125 X 1067) (50 X 14 Fork Spread, Outside Dimensions in. (mm) 43.3 (1099) 43.3 (1099) 43.3 (1099) 43. 15 Mast Tilt Angles, Forward / Backward Degrees 6F / 10B 6F / 10B 6F / 10B 6 16 Length To Face of Forks in. (mm) 103.7 (2633) 103.7 (2633) 103.7 (2633) 103 17 Overall Width, Standard Tread in. (mm) 45.6 (1157) 45.6 (1157) 45.6 (1157) 45. Overall Width, Wide Tread in. (mm) 52.6 (1336) 52.6 (1336) 52.6 (1336) 52. 18 Height, Standard Mast - Lowered in. (mm) 89 (2245) 89 (2245) 89 (2245) 89 19 Height, Standard Mast - Extended with LBR in. (mm) 175 (4330) 175 (4330) 175 (4330) 17 Height, Standard Mast - Extended without LBR in. (mm) 154 (3905) 154 (3905) 154 (3905) 15 20 Height, Standard Overhead Guard in. (mm) 86 (2185) 86 (2185) 86 (2185) 86 Height, Optional Overhead Guard in. (mm) 83 (2118) 83 (2118) 83 (2118) 83 21 Turning Radius, Minimum Outside (OTR) in. (mm) 90.0 (2277) 90.0 (2277) 90.0 (2277) 90. 22 Length, Center of Wheel to Face of Forks in. (mm) 18.8 (478) 18.8 (478) 18.8 (478) 18 23 Aisle Width, Right Angle Stack (Add Length of Load) in. (mm) 108.5 (2757) 108.5 (2757) 108.5 (2757) 108 24 Equal Aisle, 90-Degree Intersecting Aisle in. (mm) 82.6 (2099) 82.6 (2099) 82.6 (2099) 82. 25 Travel Speed, Standard Transmission RL/NL mph (km / h) 11.2 / 11.9 11.2 / 11.9 11.3 / 11.9 11 Travel Speed, DuraMatch Plus2 Transmission RL/NL mph (km / h) N/A N/A N/A 26 Lift Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 93.0 (.47) / 95.0 (.48) 97.0 (.49) / 99.0 (.50) 108.0 (.55) / 110.0 (.56) 93.0 (.4 Lift Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 95.0 (.46) / 93.0 (.47) 95.0 (.48) / 97.0 (.49) 106.0 (.54) / 108.0 (.55) 95.0 (.4 Lift Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 93.0 (.47) / 95.0 (.48) 93.0 (.47) / 95.0 (.48) 104.0 (.53) / 106.0 (.54) 93.0 (.4 27 Lowering Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.5 Lowering Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.5 Lowering Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.5 28 Drawbar Pull, Standard Transmission @ 1 mph RL/NL lb. (kg) 2910 (12.9) / 2631 (11.7) 3428 (15.2) / 2631 (11.7) 3675 (16.3) / 2631 (11.7) 3600 (16. Drawbar Pull, DuraMatch Plus2 @ 1 mph RL/NL lb. (kg) N/A N/A N/A Drawbar Pull, Standard Transmission @ 3 mph RL/NL lb. (kg) 1823 (8.1) / 1900 (8.5) 2250 (10.0) / 2400 (10.7) 2500 (11.1) / 2600 (11.6) 2350 (10. Drawbar Pull, DuraMatch Plus2 @ 3 mph RL/NL lb. (kg) N/A N/A N/A 29 Gradeability, Standard Transmission @ 1 mph RL/NL Percent % 17.6 / 26.6 20.8 / 26.6 22.6 / 26.6 21 Gradeability, DuraMatch Plus2 @ 1 mph RL/NL Percent % N/A N/A N/A Gradeability, Standard Transmission @ 3 mph RL/NL Percent % 11.0 / 19.0 13.0 / 24.0 15.0 / 26.6 14 Gradeability, DuraMatch Plus2 @ 1 mph RL/NL Percent % N/A N/A N/A 31 Weight, Standard Truck (2-Stage LFL 86 / 129) NL lb. (kg.) 9763 (4438) 9763 (4438) 9763 (4438) 976 Weight, Standard Truck (2-Stage LFL 86 / 129) RL lb. (kg.) 15763 (7165) 15763 (7165) 15763 (7165) 157 32 Axle Loading, Static Front / Rear NL lb. (kg.) 4112 (1869) / 5628 (2558) 4112 (1869) / 5628 (2558) 4112 (1869) / 5628 (2558) 4112 (186 Axle Loading, Static Front / Rear RL lb. (kg.) 14151 (6432) / 1588 (722) 14151 (6432) / 1588 (722) 14151 (6432) / 1588 (722) 14151 (64 33 Tire Size, Front 28 X 9-15 28 X 9-15 28 X 9-15 28 34 Tire Size, Rear 6.50 X 9 6.50 X 9 6.50 X 9 6 35 Wheelbase in. (mm) 63.9 (1623) 63.9 (1623) 63.9 (1623) 63. 37 Ground Clearance, Lowest Point NL (with RL subtract -6mm) in. (mm) 6.2 (157) 6.2 (157) 6.2 (157) 6. 38 Ground Clearance, Center of Wheelbase NL in. (mm) 6.3 (160) 6.3 (160) 6.3 (160) 6. 39 Service / Parking - Method of Control Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot 40 Service / Parking - Method of Operation Hand / Mechanical Hand / Mechanical Hand / Mechanical Hand / 41 Battery Type Maintenance Free Maintenance Free Maintenance Free Mainte 42 Volts / Cold Cranking Amps v / cca 12 / 475 12 / 475 12 / 770 1 43 Engine, Manufacturer / Model Mazda FE Mazda FE Yanmar M 44 Permanent Output hp 40 50 48 45 Torque @ rated RPM ft Lbs. (kgm) 91.0 (12.6) @ 1800 RPM 104.0 (14.4) @ 1800 RPM 108.0 (14.9) @ 1400 RPM 108.0 (14. 46 Number of Cylinders / Displacement No. cc (ci) 4 / 1998 (122) 4 / 1998 (122) 4 / 2659 (162) 4 / 2 47 Transmission Type, Standard Electronic Powershift Electronic Powershift Electronic Powershift Dura Standard Speeds Fwd-Rev Optional Speeds Fwd-Rev 1-1 N/A 1-1 N/A 1-1 N/A 1-48 Noise Level, LEQ db(a) 78 78 78 49 Hydraulic Tank, Capacity (Drain and Refill) gal. (litre) 10.5 (39.7) 10.5 (39.7) 10.5 (39.7) 10 50 Fuel Tank, Capacity (Gasoline & Diesel-Powered Units Only) gal. (litre) 13.9 (52.7) 13.9 (52.7) 13.9 (52.7) 13 51 Auxilliary Hydraulic Pressure Relief for Attachments PSI (Mpa) 2250 (15.5) 2250 (15.5) 2250 (15.5) 225
CERTIFICATION: These Hyster lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck. NOTE: Performance specifications / ratings are for truck equipped as described under Standard Equipment in this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature and condition of the operating area. Specifications are subject to change and the proposed application should be discussed with your authorized Hyster Company Dealer. Limited by traction. For further information on this dimension, please contact your local Hyster Company dealer. Hyster Company Hyster Company Hyster Company Hyster Company Hyster Company Hyster Company H60FT H60FT H60FT H60FT H60FT H60FT is Advance Package Fortis Advance Package Fortis Advance Package Fortis Advance+ Package Fortis Advance+ Package Fortis Advance+ Package DuraMatch DuraMatch DuraMatch DuraMatch Plus (standard) or DuraMatch Plus2 (optional) Mazda 2.2L Mazda 2.2L Yanmar 2.6L GM 2.4L GM 2.4L Yanmar 3.3L 6000 (2722) 6000 (2722) 6000 (2722) 6000 (2722) 6000 (2722) 6000 (2722) 24.0 (610) 24.0 (610) 24.0 (610) 24.0 (610) 24.0 (610) 24.0 (610) LP Gas Diesel LP Gas Diesel Sit-Down Rider Sit-Down Rider Sit-Down Rider Sit-Down Rider Sit-Down Rider Sit-Down Rider 16.0 (407) 16.0 (407) 16.0 (407) 16.0 (407) 16.0 (407) 16.0 (407) Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic 2x / 2 2x / 2 2x / 2 2x / 2 2x / 2 2x / 2 126 (3209) 126 (3209) 126 (3209) 126 (3209) 126 (3209) 126 (3209) 5 (140) 5 (140) 5 (140) 5 (140) 5 (140) 5 (140) 58 (1490) 58 (1490) 58 (1490) 58 (1490) 58 (1490) 58 (1490) 42.0 (1067) 42.0 (1067) 42.0 (1067) 42.0 (1067) 42.0 (1067) 42.0 (1067) 2.0 X 4.9 X 42.0 2.0 X 4.9 X 42.0 2.0 X 4.9 X 42.0 2.0 X 4.9 X 42.0 2.0 X 4.9 X 42.0 2.0 X 4.9 X 42.0 (50 X 125 X 1067) (50 X 125 X 1067) (50 X 125 X 1067) (50 X 125 X 1067) (50 X 125 X 1067) (50 X 125 X 1067) 43.3 (1099) 43.3 (1099) 43.3 (1099) 43.3 (1099) 43.3 (1099) 43.3 (1099) 6F / 10B 6F / 10B 6F / 10B 6F / 10B 6F / 10B 6F / 10B 103.7 (2633) 103.7 (2633) 103.7 (2633) 103.7 (2633) 103.7 (2633) 103.7 (2633) 45.6 (1157) 45.6 (1157) 45.6 (1157) 45.6 (1157) 45.6 (1157) 45.6 (1157) 52.6 (1336) 52.6 (1336) 52.6 (1336) 52.6 (1336) 52.6 (1336) 52.6 (1336) 89 (2245) 89 (2245) 89 (2245) 89 (2245) 89 (2245) 89 (2245) 175 (4330) 175 (4330) 175 (4330) 175 (4330) 175 (4330) 175 (4330) 154 (3905) 154 (3905) 154 (3905) 154 (3905) 154 (3905) 154 (3905) 86 (2185) 86 (2185) 86 (2185) 86 (2185) 86 (2185) 86 (2185) 83 (2118) 83 (2118) 83 (2118) 83 (2118) 83 (2118) 83 (2118) 90.0 (2277) 90.0 (2277) 90.0 (2277) 90.0 (2277) 90.0 (2277) 90.0 (2277) 18.8 (478) 18.8 (478) 18.8 (478) 18.8 (478) 18.8 (478) 18.8 (478) 108.5 (2757) 108.5 (2757) 108.5 (2757) 108.5 (2757) 108.5 (2757) 108.5 (2757) 82.6 (2099) 82.6 (2099) 82.6 (2099) 82.6 (2099) 82.6 (2099) 82.6 (2099) 11.2 / 11.9 11.2 / 11.9 11.3 / 11.9 11.6 / 12.3 11.6 / 12.3 12.4 / 13.1 N/A N/A N/A 12.3 / 13.0 12.3 / 13.0 13.0 / 13.0 3.0 (.47) / 95.0 (.48) 97.0 (.49) / 99.0 (.50) 108.0 (.55) / 110.0 (.56) 104.0 (.53) / 106.0 (.54) 104.0 (.53) / 106.0 (.54) 116.0 (.59) / 117.0 (.60) 5.0 (.46) / 93.0 (.47) 95.0 (.48) / 97.0 (.49) 106.0 (.54) / 108.0 (.55) 102.0 (.52) / 104.0 (.53) 102.0 (.52) / 104.0 (.53) 112.0 (.57) / 115.0 (.58) 3.0 (.47) / 95.0 (.48) 93.0 (.47) / 95.0 (.48) 104.0 (.53) / 106.0 (.54) 100.0 (.51) / 102.0 (.52) 100.0 (.51) / 102.0 (.52) 112.0 (.57) / 115.0 (.58) 8.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 8.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 8.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 0 (16.0) / 2631 (11.7) 3772 (16.8) / 2631 (11.7) 3675 (16.3) / 2631 (11.7) 4242 (18.9) / 2631 (11.7) 4265 (19.0) / 2631 (11.7) 4844 (21.6) / 2631 (11.7) N/A N/A N/A 4900 (2.18) / 2631 (11.7) 4900 (2.18) / 2631 (11.7) 4900 (21.8) / 2631 (11.7) 0 (10.5) / 2500 (11.1) 2500 (11.1) / 2650 (11.8) 2500 (11.1) / 2600 (11.6) 3000 (13.4) / 2631 (11.7) 3000 (13.4) / 2631 (11.7) 3650 (16.2) / 3700 (16.5) N/A N/A N/A 3500 (15.6) / 2631 (11.7) 3500 (13.8) / 2631 (11.7) 4400 (19.6) / 4350 (19.4) 21.5 / 26.6 23.0 / 26.6 22.6 / 26.6 25.8 / 26.6 26.2 / 26.6 30.3 / 26.6 N/A N/A N/A 30.4 / 26.6 30.4 / 26.6 30.4 / 26.6 14.0 / 25.0 15.0 / 28.0 15.0 / 26.6 18.1 / 26.6 18.1 / 26.6 23.0 / 26.6 N/A N/A N/A 22.1 / 26.6 19.0 / 26.6 26.1 / 26.6 9763 (4438) 9763 (4438) 9763 (4438) 9763 (4438) 9763 (4438) 9763 (4438) 15763 (7165) 15763 (7165) 15763 (7165) 15763 (7165) 15763 (7165) 15763 (7165) 2 (1869) / 5628 (2558) 4112 (1869) / 5628 (2558) 4112 (1869) / 5628 (2558) 4112 (1869) / 5628 (2558) 4112 (1869) / 5628 (2558) 4112 (1869) / 5628 (2558) 51 (6432) / 1588 (722) 14151 (6432) / 1588 (722) 14151 (6432) / 1588 (722) 14151 (6432) / 1588 (722) 14151 (6432) / 1588 (722) 14151 (6432) / 1588 (722) 28 X 9-15 28 X 9-15 28 X 9-15 28 X 9-15 28 X 9-15 28 X 9-15 6.50 X 9 6.50 X 9 6.50 X 9 6.50 X 9 6.50 X 9 6.50 X 9 63.9 (1623) 63.9 (1623) 63.9 (1623) 63.9 (1623) 63.9 (1623) 63.9 (1623) 6.2 (157) 6.2 (157) 6.2 (157) 6.2 (157) 6.2 (157) 6.2 (157) 6.3 (160) 6.3 (160) 6.3 (160) 6.3 (160) 6.3 (160) 6.3 (160) Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Hand / Mechanical Hand / Mechanical Hand / Mechanical Hand / Mechanical Hand / Mechanical Hand / Mechanical Maintenance Free Maintenance Free Maintenance Free Maintenance Free Maintenance Free Maintenance Free 12 / 475 12 / 475 12 / 770 12 / 475 12 / 475 12 / 770 Mazda F2 Mazda F2 Yanmar GM GM Yanmar 46 50 48 62 62 65.0 (14.9) @ 1800 RPM 115.0 (15.9) @ 1800 RPM 108.0 (14.9) @ 1400 RPM 123.0 (17.0) @ 2650 RPM 124.0 (17.1) @ 2650 RPM 155.0 (21.4) @ 1700 RPM 4 / 2184 (133) 4 / 2184 (133) 4 / 2659 (162) 4 / 2405 (147) 4 / 2405 (147) 4 / 3319 (202) DuraMatch DuraMatch DuraMatch DuraMatch Plus DuraMatch Plus DuraMatch Plus 1-1 N/A 1-1 N/A 1-1 N/A 1-1 2-1 1-1 2-1 1-1 2-1 78 78 78 78 78 78 10.5 (39.7) 10.5 (39.7) 10.5 (39.7) 10.5 (39.7) 10.5 (39.7) 10.5 (39.7) 13.9 (52.7) 13.9 (52.7) 13.9 (52.7) 13.9 (52.7) 13.9 (52.7) 13.9 (52.7) 2250 (15.5) 2250 (15.5) 2250 (15.5) 2250 (15.5) 2250 (15.5) 2250 (15.5)
9 POWERTRAIN TIRES & WHLS WEIGHT PERFORMANCE DIMENSIONS GENERAL Hyster H70FT Lift Truck Dimensions 1 Manufacturer Name Manufacturer Name HysterCompany HysterCompany HysterCompany Hyste 2 Model H70FT H70FT H70FT H Manufacturer Designation Fortis Package Fortis Package Fortis Package Fortis A Transmission Electronic Powershift Electronic Powershift Electronic Powershift Dura Engine Mazda 2.2L Mazda 2.2L Yanmar 3.3L G 3 Rated Capacity lb. (kg) 7000 (3175) 7000 (3175) 7000 (3175) 700 4 Load Center, Distance in. (mm) 24.0 (610) 24.0 (610) 24.0 (610) 24 5 Power Type - Gasoline, LPG, Diesel LP Gas Diesel 6 Operator Type Sit-Down Rider Sit-Down Rider Sit-Down Rider Sit-D 7 Step Height in. (mm) 16.0 (407) 16.0 (407) 16.0 (407) 16 8 Tire Type - Cushion, Solid, Pneumatic Pneumatic Pneumatic Pneumatic Pn 9 Wheels, Number - Front / Rear 2x / 2 2x / 2 2x / 2 10 Lift Height, Top of Fork (TOF) in. (mm) 126 (3209) 126 (3209) 126 (3209) 12 11 Lift Heights, Standard Limited Free Lift (LFL) with LBR (TOF) in. (mm) 5 (140) 5 (140) 5 (140) 5 Lift Heights, Optional Full Free Lift (FFL) with LBR (TOF) in. (mm) 58 (1490) 58 (1490) 58 (1490) 58 12 Standard Carriage Width in. (mm) 42.0 (1067) 42.0 (1067) 42.0 (1067) 42. 13 Forks, Thickness x Width x Length in. 2.0 X 4.9 X 42.0 2.0 X 4.9 X 42.0 2.0 X 4.9 X 42.0 2.0 X Forks, Thickness x Width x Length (mm) (50 X 125 X 1067) (50 X 125 X 1067) (50 X 125 X 1067) (50 X 14 Fork Spread, Outside Dimensions in. (mm) 43.3 (1099) 43.3 (1099) 43.3 (1099) 43. 15 Mast Tilt Angles, Forward / Backward Degrees 6F / 10B 6F / 10B 6F / 10B 6 16 Length To Face of Forks in. (mm) 107.6 (2734) 107.6 (2734) 107.6 (2734) 107 17 Overall Width, Standard Tread in. (mm) 45.6 (1157) 45.6 (1157) 45.6 (1157) 45. Overall Width, Wide Tread in. (mm) 52.6 (1336) 52.6 (1336) 52.6 (1336) 52. 18 Height, Standard Mast - Lowered in. (mm) 89 (2245) 89 (2245) 89 (2245) 89 19 Height, Standard Mast - Extended with LBR in. (mm) 175 (4330) 175 (4330) 175 (4330) 17 Height, Standard Mast - Extended without LBR in. (mm) 154 (3905) 154 (3905) 154 (3905) 15 20 Height, Standard Overhead Guard in. (mm) 86 (2185) 86 (2185) 86 (2185) 86 Height, Optional Overhead Guard in. (mm) 83 (2118) 83 (2118) 83 (2118) 83 21 Turning Radius, Minimum Outside (OTR) in. (mm) 93.7 (2380) 93.7 (2380) 93.7 (2380) 93. 22 Length, Center of Wheel to Face of Forks in. (mm) 18.8 (478) 18.8 (478) 18.8 (478) 18 23 Aisle Width, Right Angle Stack (Add Length of Load) in. (mm) 112.6 (2860) 112.6 (2860) 112.6 (2860) 112 24 Equal Aisle, 90-Degree Intersecting Aisle in. (mm) 84.3 (2142) 84.3 (2142) 84.3 (2142) 84. 25 Travel Speed, Standard Transmission RL/NL mph (km / h) 11.2 / 11.9 11.2 / 11.9 12.4 / 13.1 11 Travel Speed, DuraMatch Plus2 Transmission RL/NL mph (km / h) N/A N/A N/A 26 Lift Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 97.0 (.49) / 99.0 (.50) 97.0 (.49) / 99.0 (.50) 116.0 (.59) / 117.0 (.60) 104.0 (.5 Lift Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 95.0 (.48) / 97.0 (.49) 95.0 (.48) / 97.0 (.49) 112.0 (.57) / 115.0 (.58) 102.0 (.5 Lift Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 93.0 (.47) / 95.0 (.48) 93.0 (.47) / 95.0 (.48) 112.0 (.57) / 115.0 (.58) 100.0 (.5 27 Lowering Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.5 Lowering Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.5 Lowering Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.5 28 Drawbar Pull, Standard Transmission @ 1 mph lb. (kg) 3536 (15.7) / 2830 (12.6) 3772 (16.8) / 2830 (12.6) 4828 (21.5) / 2830 (12.6) 4230 (18. Drawbar Pull, DuraMatch Plus2 @ 1 mph lb. (kg) N/A N/A N/A Drawbar Pull, Standard Transmission @ 3 mph lb. (kg) 2350 (10.5) / 2500 (11.1) 2550 (11.3) / 2700 (12.0) 3700 (16.5) / 2830 (12.6) 2800 (12. Drawbar Pull, DuraMatch Plus2 @ 3 mph lb. (kg) N/A N/A N/A 29 Gradeability, Standard Transmission @ 1 mph RL/NL Percent % 19.4 / 26.9 20.7 / 26.9 27.1 / 27.0 23 Gradeability, DuraMatch Plus2 @ 1 mph RL/NL Percent % N/A N/A N/A Gradeability, Standard Transmission @ 3 mph RL/NL Percent % 13.5 / 23.0 15.0 / 25.0 20.2 / 27.0 15 Gradeability, DuraMatch Plus2 @ 3 mph RL/NL Percent % N/A N/A N/A 31 Weight, Standard Truck (2 Stg. LFL 86 / 129) NL lb. (kg.) 10457 (4753) 10457 (4753) 10457 (4753) 104 Weight, Standard Truck (2 Stg. LFL 86 / 129) RL lb. (kg.) 17457 (7935) 17457 (7935) 17457 (7935) 174 32 Axle Loading, Static Front / Rear NL lb. (kg.) 4024 (1829) / 6401 (2910) 4024 (1829) / 6401 (2910) 4024 (1829) / 6401 (2910) 4024 (182 Axle Loading, Static Front / Rear RL lb. (kg.) 15519 (7054) / 1906 (866) 15519 (7054) / 1906 (866) 15519 (7054) / 1906 (866) 15519 (70 33 Tire Size, Front 28 X 9-15 28 X 9-15 28 X 9-15 28 34 Tire Size, Rear 6.50 X 10 6.50 X 10 6.50 X 10 6. 35 Wheelbase in. (mm) 67.0 (1700) 67.0 (1700) 67.0 (1700) 67. 37 Ground Clearance, Lowest Point NL (with RL subtract -6mm) in. (mm) 6.2 (157) 6.2 (157) 6.2 (157) 6. 38 Ground Clearance, Center of Wheelbase NL in. (mm) 7.3 (185) 7.3 (185) 7.3 (185) 7. 39 Service / Parking - Method of Control Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot 40 Service / Parking - Method of Operation Hand / Mechanical Hand / Mechanical Hand / Mechanical Hand / 41 Battery Type Maintenance Free Maintenance Free Maintenance Free Mainte 42 Volts / Cold Cranking Amps v / cca 12 / 475 12 / 475 12 / 770 1 43 Engine, Manufacturer / Model Mazda Mazda Yanmar 44 Permanent Output hp 46 50 65 45 Torque @ rated RPM ft Lbs. (kgm) 108.0 (14.9) @ 1800 RPM 115.0 (15.9) @ 1800 RPM 155.0 (21.4) @ 1700 RPM 123.0 (17. 46 Number of Cylinders / Displacement No. cc (ci) 4 / 2184 (133) 4 / 2184 (133) 4 / 3319 (202) 4 / 2 47 Transmission Type, Standard Electronic Powershift Electronic Powershift Electronic Powershift Dura Standard Speeds Fwd-Rev Optional Speeds Fwd-Rev 1-1 N/A 1-1 N/A 1-1 N/A 1-48 Noise Level, LEQ db(a) 78 78 78 49 Hydraulic Tank Capacity (Drain and Refill) gal. (litre) 10.5 (39.7) 10.5 (39.7) 10.5 (39.7) 10 50 Fuel Tank Capacity (Gasoline & Diesel-Powered Units Only) gal. (litre) 13.9 (52.7) 13.9 (52.7) 13.9 (52.7) 13 51 Auxilliary Hydraulic Pressure Relief for Attachments PSI (Mpa) 2250 (15.5) 2250 (15.5) 2250 (15.5) 225
CERTIFICATION: These Hyster lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck. NOTE: Performance specifications / ratings are for truck equipped as described under Standard Equipment in this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature and condition of the operating area. Specifications are subject to change and the proposed application should be discussed with your authorized Hyster Company Dealer. Limited by traction. For further information on this dimension, please contact your local Hyster Company dealer. HysterCompany HysterCompany HysterCompany HysterCompany HysterCompany HysterCompany H70FT H70FT H70FT H70FT H70FT H70FT ortis Advance Package Fortis Advance Package Fortis Advance Package Fortis Advance + Package Fortis Advance + Package Fortis Advance + Package DuraMatch DuraMatch DuraMatch DuraMatch Plus (standard) and DuraMatch Plus2 (optional) GM 2.4L GM 2.4L Yanmar 3.3L GM 2.4L GM 2.4L Yanmar 3.3L 7000 (3175) 7000 (3175) 7000 (3175) 7000 (3175) 7000 (3175) 7000 (3175) 24.0 (610) 24.0 (610) 24.0 (610) 24.0 (610) 24.0 (610) 24.0 (610) LP Gas Diesel LP Gas Diesel Sit-Down Rider Sit-Down Rider Sit-Down Rider Sit-Down Rider Sit-Down Rider Sit-Down Rider 16.0 (407) 16.0 (407) 16.0 (407) 16.0 (407) 16.0 (407) 16.0 (407) Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic 2x / 2 2x / 2 2x / 2 2x / 2 2x / 2 2x / 2 126 (3209) 126 (3209) 126 (3209) 126 (3209) 126 (3209) 126 (3209) 5 (140) 5 (140) 5 (140) 5 (140) 5 (140) 5 (140) 58 (1490) 58 (1490) 58 (1490) 58 (1490) 58 (1490) 58 (1490) 42.0 (1067) 42.0 (1067) 42.0 (1067) 42.0 (1067) 42.0 (1067) 42.0 (1067) 2.0 X 4.9 X 42.0 2.0 X 4.9 X 42.0 2.0 X 4.9 X 42.0 2.0 X 4.9 X 42.0 2.0 X 4.9 X 42.0 2.0 X 4.9 X 42.0 (50 X 125 X 1067) (50 X 125 X 1067) (50 X 125 X 1067) (50 X 125 X 1067) (50 X 125 X 1067) (50 X 125 X 1067) 43.3 (1099) 43.3 (1099) 43.3 (1099) 43.3 (1099) 43.3 (1099) 43.3 (1099) 6F / 10B 6F / 10B 6F / 10B 6F / 10B 6F / 10B 6F / 10B 107.6 (2734) 107.6 (2734) 107.6 (2734) 107.6 (2734) 107.6 (2734) 107.6 (2734) 45.6 (1157) 45.6 (1157) 45.6 (1157) 45.6 (1157) 45.6 (1157) 45.6 (1157) 52.6 (1336) 52.6 (1336) 52.6 (1336) 52.6 (1336) 52.6 (1336) 52.6 (1336) 89 (2245) 89 (2245) 89 (2245) 89 (2245) 89 (2245) 89 (2245) 175 (4330) 175 (4330) 175 (4330) 175 (4330) 175 (4330) 175 (4330) 154 (3905) 154 (3905) 154 (3905) 154 (3905) 154 (3905) 154 (3905) 86 (2185) 86 (2185) 86 (2185) 86 (2185) 86 (2185) 86 (2185) 83 (2118) 83 (2118) 83 (2118) 83 (2118) 83 (2118) 83 (2118) 93.7 (2380) 93.7 (2380) 93.7 (2380) 93.7 (2380) 93.7 (2380) 93.7 (2380) 18.8 (478) 18.8 (478) 18.8 (478) 18.8 (478) 18.8 (478) 18.8 (478) 112.6 (2860) 112.6 (2860) 112.6 (2860) 112.6 (2860) 112.6 (2860) 112.6 (2860) 84.3 (2142) 84.3 (2142) 84.3 (2142) 84.3 (2142) 84.3 (2142) 84.3 (2142) 11.6 / 12.3 11.6 / 12.3 12.4 / 13.1 11.6 / 12.3 12.3 / 13.0 12.4 / 13.1 N/A N/A N/A 12.3 / 13.0 12.3 / 13.0 13.0 / 13.0 104.0 (.53) / 106.0 (.54) 104.0 (.53) / 106.0 (.54) 116.0 (.59) / 117.0 (.60) 104.0 (.53) / 106.0 (.54) 104.0 (.53) / 106.0 (.54) 116.0 (.59) / 117.0 (.60) 102.0 (.52) / 104.0 (.53) 102.0 (.52) / 104.0 (.53) 112.0 (.57) / 115.0 (.58) 102.0 (.52) / 104.0 (.53) 102.0 (.52) / 104.0 (.53) 112.0 (.57) / 115.0 (.58) 100.0 (.51) / 102.0 (.52) 100.0 (.51) / 102.0 (.52) 112.0 (.57) / 115.0 (.58) 100.0 (.51) / 102.0 (.52) 100.0 (.51) / 102.0 (.52) 112.0 (.57) / 115.0 (.58) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 98.0 (.50) / 83.0 (.42) 4230 (18.9) / 2830 (12.6) 4239 (18.9) / 2830 (12.6) 4828 (21.5) / 2830 (12.6) 4230 (18.8) / 2830 (12.6) 4239 (18.9) / 2830 (12.6) 4828 (21.5) / 2830 (12.6) N/A N/A N/A 4900 (21.8) / 2830 (12.6) 4900 (21.8) / 2830 (12.6) 4900 (21.8) / 2830 (12.6) 2800 (12.5) / 2830 (12.6) 2800 (12.5) / 2830 (12.6)) 3700 (16.5) / 2830 (12.6) 2800 (12.5) / 2830 (12.6) 2800 (12.5) / 2830 (12.6) 3700 (16.5) / 2830 (12.6) N/A N/A N/A 3600 (16.0) / 3800 (16.9) 3600 (16.0) / 2830 (12.6) 4300 (19.1) / 4350 (19.4) 23.8 / 26.9 23.8 / 26.9 27.1 / 27.0 23.8 / 26.9 23.8 / 26.9 27.1 / 27.0 N/A N/A N/A 27.3 / 26.9 27.3 / 26.9 27.3 / 26.9 15.2 / 26.9 15.2 / 26.9 20.2 / 27.0 15.2 / 26.9 15.2 / 26.9 20.2 / 27.0 N/A N/A N/A 20.0 / 26.9 20.0 / 26.9 24.0 / 26.9 10457 (4753) 10457 (4753) 10457 (4753) 10457 (4753) 10457 (4753) 10457 (4753) 17457 (7935) 17457 (7935) 17457 (7935) 17457 (7935) 17457 (7935) 17457 (7935) 024 (1829) / 6401 (2910) 4024 (1829) / 6401 (2910) 4024 (1829) / 6401 (2910) 4024 (1829) / 6401 (2910) 4024 (1829) / 6401 (2910) 4024 (1829) / 6401 (2910) 5519 (7054) / 1906 (866) 15519 (7054) / 1906 (866) 15519 (7054) / 1906 (866) 15519 (7054) / 1906 (866) 15519 (7054) / 1906 (866) 15519 (7054) / 1906 (866) 28 X 9-15 28 X 9-15 28 X 9-15 28 X 9-15 28 X 9-15 28 X 9-15 6.50 X 10 6.50 X 10 6.50 X 10 6.50 X 10 6.50 X 10 6.50 X 10 67.0 (1700) 67.0 (1700) 67.0 (1700) 67.0 (1700) 67.0 (1700) 67.0 (1700) 6.2 (157) 6.2 (157) 6.2 (157) 6.2 (157) 6.2 (157) 6.2 (157) 7.3 (185) 7.3 (185) 7.3 (185) 7.3 (185) 7.3 (185) 7.3 (185) Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Hand / Mechanical Hand / Mechanical Hand / Mechanical Hand / Mechanical Hand / Mechanical Hand / Mechanical Maintenance Free Maintenance Free Maintenance Free Maintenance Free Maintenance Free Maintenance Free 12 / 475 12 / 475 12 / 770 12 / 475 12 / 475 12 / 770 GM GM Yanmar GM GM Yanmar 62 62 65 62 62 65 23.0 (17.0) @ 2650 RPM 124.0 (17.1) @2650 RPM 155.0 (21.4) @ 1700 RPM 123.0 (17.0) @ 2650 RPM 124.0 (17.1) @ 2650 RPM 155.0 (21.4) @ 1700 RPM 4 / 2405 (147) 4 / 2405 (147) 4 / 3319 (202) 4 / 2405 (147) 4 / 2405 (147) 4 / 3319 (202) DuraMatch DuraMatch DuraMatch DuraMatch Plus DuraMatch Plus DuraMatch Plus 1-1 N/A 1-1 N/A 1-1 N/A 1-1 2-1 1-1 2-1 1-1 2-1 78 78 78 78 78 78 10.5 (39.7) 10.5 (39.7) 10.5 (39.7) 10.5 (39.7) 10.5 (39.7) 10.5 (39.7) 13.9 (52.7) 13.9 (52.7) 13.9 (52.7) 13.9 (52.7) 13.9 (52.7) 13.9 (52.7) 2250 (15.5) 2250 (15.5) 2250 (15.5) 2250 (15.5) 2250 (15.5) 2250 (15.5)