SAE 2013 International Vehicle Lightweighting Forum September 10-11, 2013 Crowne Plaza Anting Golf Shanghai, China www.sae.org/events/lwf
Overview Benefits of Attending: International Standards for reducing emissions and increasing fuel efficiencies are creating a need for OEMs to develop lighter vehicles to achieve these requirements. This Lightweighting Forum has been designed to provide automobile manufacturers and suppliers the latest advances in manufacturing strategies, design and materials selection strategies to promote lighter weight, higher performing, fuel efficient vehicles without sacrificing safety or performance. What makes this event Unique? This Forum will feature presentations on the latest breakthroughs in lightweight materials and cutting-edge adaptive applications from OEMs, Tier 1 suppliers, universities, and research institutions. Special focus will be on tangible, cost-effective strategies in lightweighting. Who Should Attend? Directors, Managers and Engineers in: Material Engineering Manufacturing R&D Lightweight Strategy Body Structures Design Engineers Advanced Materials Concept and Product Development Interiors Exteriors This event will feature presentations from the Aero, Auto and Commercial Vehicle Industries Invited OEMs & Upper suppliers FAW, Dongfeng Motor(DFM), SAIC Motor, BAIC Motor, Chang'an Automobile, Shanghai GM, Shanghai Huizhong Automotive 2 www.sae.org/events/lwf - Register by 9 August to Save!
Agenda DAY ONE DAY TWO 9:00 Keynote: Current and Future State of Lightweighting - A North American Perspective. Dr. Anil Sachdev, GM R&D Toyota Motor Co. -Invited 9:30 Keynote: Current and Future State of Lightweighting Seating Design a Vehicle Lightweighting Zhongqin Lin, Vice President and Professor of Mechanical Lear (Invited) Engineering, Shanghai Jiao Tong University 10:00 JLR's Light Weight Vehicle strategy as demonstrated by the L405 (Range Rover) & L494 (Range Rover Sport) Jag/LandRover (Invited) Joining dissimilar materials for mass reduction of vehicle body Jeff Wang, GM 10:30 BREAK BREAK 11:00 11:30 Advanced 3rd Generation High Strength Steels Dr. Li Wang, Bao Steel Carbon fiber composites: The path traveled and the road ahead Christian Jansen, M.Eng., Gaius Automotive, Inc. The Greatest Potential for Weight Savings when Integrating Lightweight Materials Into Body-in- White James Truskin, Chrysler (Invited) Lightweight design for midsize crossover vehicle Speaker TBD, FEV (Invited) 12:00 LUNCH LUNCH 13:30 14:00 14:30 15:00 BASF First Composite Parts plus Application Service Speaker TBD, BASF Automotive Lightweighting with Advanced High Strength Steels (zinc+steel). Dr Frank Goodwin, International Zinc Association Composite study Edward Yue, Dow Lightweighting Using Aluminum and Magnesium Alan Luo, The Ohio State University Alternative Cutting Methods for Improved Edge Stretching Performance of Automotive Sheet Steels Brandon M. Hance, PhD, AK Steel Corporation Bonding Aluminum and Composite Boeing (Invited) OPEN Adhesive Bonding of Dissimilar Material, Aluminum and High Strength Steel Qing Zhou, Tsinghua University 15:30 BREAK BREAK 16:00 16:30 Multi-Material Lightweight Vehicel Design Tim Skszek, Vehma Int'l (Invited) Panel Discussion: Impact and Economics of Lightweighting Moderator: Alan Luo/Qing Zhou 18:00 Dinner or Reception Fatigue and Durability of Lightweight Vehicles BMW (Invited) Vehicle Safety and Lightweighting Dr. Hui Zhao, VP of Engineering, Changan Automotive Corporation Sponsored Speaking Opportunity available! To become a sponsored speaker at SAE Lightweighting Forum, Please Find details on Page 10. Become a VIP to attend the SAE Lightweighting forum! 10 VIP registration slots are open! Please contact Mr. Rick Wang at +86-21- 6131-2392, rickwang@sae.org (Application open for OEMs only) SAE Members save on most SAE publications, conferences, seminars and more! 3
Core Topics Whether you are materials engineer, a design engineer or a manufacturing engineer all costs in materials, design and manufacturing must be assessed against the savings in weight that they provide in order to meet future fuel economy standards. Critical discussions within your organizations must occur regarding the various value propositions before final decisions are made on new material selections. This forum is broken down under the following three areas of focus to assist you with those discussions: Lightweight Materials - One of the easiest ways to reduce mass is to look at alternatives to traditional steel. Materials such as Composites, Aluminum, Magnesium, Zinc and High Strength Steels each offer unique value propositions for OEMs to consider when looking to reduce mass from a vehicle. This forum provides case study presentation on these materials and their economic justification based upon a given application. Design integration - Each material offers unique challenges for a design engineer to consider. There are trade off that must be considered including: total costs, safety, durability, material interface, and DFM. This forum will present experts in designing vehicles with lighter weight materials and the various lessons learned when dealing with these considerations. Manufacturing, Joining and Fabrication - Each material offers unique challenges for a manufacturing engineer when integrating them into a vehicle. Each requires different process for fabrication, joining and manufacturing which can add cost to the production of a vehicle platform. This forum provides experts who will talk about bonding dissimilar materials, fabrication of unique materials and their trade-offs to weight reduction, and case studies on various value propositions for each process. 4 www.sae.org/events/lwf - Register by 9 August to Save!
Speakers' Bios Dr. Anil K. Sachdev Research Fellow & Lab Group Manager Chemical and Materials Systems Lab at GM R&D Center Anil Sachdev started his GM career in 1977 with the GM Research Labs after receiving his doctorate in Materials Science and Engineering from the Massachusetts Institute of Technology, his MSc in Metallurgical Engineering from Purdue University, and BSc in Metallurgical Engineering from Banaras Hindu University in India. His research interests include structure-property relationships and microstructure design in aluminum and magnesium alloys for structural applications, metal matrixcomposites, and high strength steels. He is currently Research Fellow and Lab Group Manager in the Chemical and Materials Systems Lab at the GM R&D Center, and leads advanced materials-related projects for next-generation lightweight body and powertrains. The various projects he is leading are focused on improving the performance of lightweight materials to reduce component mass for improved fuel economy. He has 98 external publications and 33 patents, and has received Best Paper Awards from the AFS and TMS Societies. He was most recently instrumental in setting up GM Collaborative Research Labs at Brown University and Shanghai Jiao Tong University. Zhongqin LIN Vice President and Professor Mechanical Engineering, Shanghai Jiaotong University Prof. Lin received his Bachelor s Degree in Naval Engineering from SJTU in 1982 and received his Ph.D. in Ship Structural Mechanics from SJTU in 1989. Before assuming as Deputy President, Prof. Lin was Acting Dean of the School of Mechanical Engineering, SJTU. His research interests in recent years include sheet metal forming, manufacturing quality control and process simulation technologies. Prof. Lin has been in charge of more than 40 major projects sponsored by national 973 Program, 863 Program, the National Science Foundation of China as well as Industry projects. He has received three National Science and Technology Progress Awards, the First Prize of Shanghai Science and Technology Advancement Awards, the First Prize of Science and Technology Advancement Awards for China s Machine-building Industry, Award for Ten Elite Scholars of Science and Technology in Shanghai, the First Prize of GM Foundation Science and Technology Achievement Award, Chiang Technology Achievement Award, Prize for Scientific and Technology Innovation of Ho Leung Ho Lee Foundation and Cheung Kong Scholar Achievement Award, etc. Frank E. Goodwin Director, Technology and Market Development International Zinc Association Dr. Frank Goodwin serves as Director of Technology and Market Development at International Zinc Association and is based in IZA s Durham, NC office. Dr Goodwin joined International Lead Zinc Research Organization (ILZRO) in 1982 and was Executive Vice President of ILZRO at the time of merger between ILZRO and IZA in 2004. He earned his S.M. and Sc.D. degrees in Materials Engineering from the Massachusetts Institute of Technology in Cambridge, MA together with a B.S. degree (with distinction) in Materials Science and Engineering from Cornell University, Ithaca, NY. He is the author of several U.S. and foreign patents and over 300 technical publications and contributions to books. SAE Members save on most SAE publications, conferences, seminars and more! 5
Speakers' Bios Li WANG Director of the Board of Directors Bao Steel Co., Ltd. Mr. Wang is the Chairman of the Board of Directors of Shanghai Baosight Software Co., Ltd., Director of the Board of Directors of Baoshan Iron & Steel Co., Ltd., (Bao Steel) Senior Engineer. Mr. Wang has extensive experience in information, system innovation and operating management. Mr. Wang joined Baosteel in February 1982 and has successively held positions of Deputy Director of Corporate Management Department, Director of System Development Department, Director of automation Institute, President of Baosteel Computer Company, Deputy CPC Committee secretary, Secretary of the Disciplinary Inspection Committee, Vice President, Senior Vice President and President of Baosight Software Co., Ltd. He has worked as Assistant to President of Baoshan Iron & Steel Co., Ltd. and Director of Operation Improvement Department in October 2006, Business Director of Baosteel Group Corporation from April 2008 to May 2009, Secretary to the Board of Directors of Baosteel Group Corporation in January 2009, President of Operation Improvement Department from May 2009 to March 2011, Secretary to the Board of Directors of Baosteel Group Corporation from May 2011 to September 2012, Assistant to President of Baosteel Group Corporation from May 2011 to April 2013, Chairman of the Board of Directors of Shanghai Baosight Software Co., Ltd.,Director of the Board of Directors of Baoshan Iron & Steel Co., Ltd. since April 2012. Mr.Wang graduated from Northeast Institute of Technology in 1982. Christian Jansen M.A.Sc. Chief Technology Officer Gaius Automotive Mr. Jansen received his Bachelor s Degree in Mechanical Engineering and Master s Degree specializing on composite materials from the University of Waterloo, Canada. His work experience spans Tier 1 R&D to racing and supercar design and construction, focusing on composite structures, manufacturability, crashworthiness and dynamics. He is currently lightweighting electric vehicles as Chief Technology Officer at Gaius Automotive in Taiwan. Alan Luo Professor of Engineering at The Ohio State University Dr. Alan Luo is a Professor of Materials Science and Engineering and Professor of Integrated Systems Engineering (Manufacturing Group) at The Ohio State University (OSU) in Columbus, OH, USA. Prior to joining OSU in July 2013, Dr. Luo was a GM Technical Fellow at General Motors Global Research and Development Center (Warren, MI, USA) with 20 years of industrial R&D experience including 15 years at GM. Dr. Luo won two John M. Campbell Awards for his fundamental research, and three Charles L. McCuen Awards for research applications at GM. Prof. Luo has 15 patents and more than 170 technical publications in lightweight materials, manufacturing and applications. Prof. Luo is an elected Fellow of ASM (American Society of Metals) International and received the ASM Materials Science Research Silver Medal in 2008, SAE (Society for Automotive Engineers) International Forest R. McFarland Award in 2013, TMS (The Minerals, Metals & Materials Society) Brimacombe Medalist Award in 2013, and USCAR (United States Council for Automotive Research) Special Recognition Award in 2009. Dr. Luo s research is also recognized by several Best Paper awards from TMS, SAE and AFS (American Foundry Society). Dr. Luo has served as the TMS Magnesium Committee chair, and is presently the vice chair of SAE Materials Division and its Non-Ferrous Metals Committee chair. 6 www.sae.org/events/lwf - Register by 9 August to Save!
Jianfeng WANG (Jeff) Manager of Manufacturing Process Research General Motors China Science Lab Dr. Jianfeng Wang is currently the Manager of Manufacturing Process Research at General Motors China Science Lab. His group is responsible for the development and implementation of joining and forming technologies for lightweight structure materials in automobile applications. Before joining GM, he has worked for Intel Product Development and Technology (Shanghai) and Ford Motor Research & Engineering Center (Nanjing). Dr. Wang received his PhD in Materials Science and Engineering from the Ohio State University, specializing in sheet metal forming and springback simulation. SAE Members save on most SAE publications, conferences, seminars and more! 7
Registration, Hotel and Travel Information To Register: International Attendees (Non-China Residents): Online: www.sae.org/events/lwf Phone: 1-877-606-7323 (U.S. and Canada), or 1-724-776-4970 Fax: 1-724-776-0790 Email: CustomerService@sae.org China Resident Attendees: Please register and arrange payment using a registration form provided by: Miss Sherry Tong, China Office Phone: +86-21-6131-2323; Fax: +86-21-2302-5988 Email: sherrytong@sae.org Pre-registration Deadline: August 9, 2013 Category International Attendee (Non-China Resident) China Residents Participant (Chair, Moderator, Presenter, Panelist, Speaker) Exhibit Booth Personnel (Limit one per booth) Exhibitor I.D. Required By August 9 After August 9 $420 $520 $320 (CNY 2000) Free Free $420 (CNY2600) Free Free Conditions of Sale: Registrations received after 9 August will automatically be charged the on-site price. NO CHILDREN UNDER THE AGE OF 16 PERMIT- TED. All cancellations must be received by SAE prior to 9 August. A $50 processing fee will be assessed for each canceled registration that results in a refund. Refunds for special event/ meal tickets will not be processed after 9 August. Refunds will not be issued if cancellation occurs on or after 9 August. All registrations include all technical sessions, Opening Networking Reception, Tuesday & Wednesday lunch, networking and exhibit breaks, and electronic copy of presentations. Hotel & Travel Information SAE International has reserved a block of rooms for this event at the Crowne Plaza Shanghai Anting Golf. All attendees are responsible for making their own lodging and travel arrangements. Hotel reservations must be made by August 26, 2013. To make a reservation, use the Hotel Reservation Form posted at the SAE website: www.sae.org. Crowne Plaza Shanghai Anting Golf Address: No. 6555 Boyuan Road, Jiading District, Shanghai 201804, P.R.China Phone: +86-21-6056 8888 Fax: +86-21-6056 8899 Special SAE International Room Rate Superior Room: 780 CNY/night (includes 15% service charge, in-room internet access, 1 breakfast) single or double See www.sae.org/events/lwf for additional information regarding transportation, passports, and visas. 8 www.sae.org/events/lwf - Register by 9 August to Save!
Marketing Solutions SPONSORSHIP and TABLETOP DISPLAY OPPORTUNITIES TABLETOP DISPLAY Tabletop Display 16,000RMB / $2,580USD One (1) 6 table with two chairs and wastebasket One (1) Full Symposium Registration (additional registrations can be purchased at discounted rate as part of the package). (Value: 1,984RMB / $320USD) Company listing in Online Exhibitor Directory and printed Event Guide FRIEND OF THE INDUSTRY LEVEL Friend of the Industry Multiple Opportunities 6200RMB / $1,000USD BRONZE LEVEL Conference Notepads Exclusive 16,000RMB / $2,580USD Company logo and/or tagline included on conference notepads One (1) Symposium Registration (Value: 1,984RMB / $320USD) Conference Pens Exclusive 16,000RMB / $2,580USD Company recognition on conference pens One (1) Symposium Registration (Value: 1,984RMB / $320USD) Conference Bags Exclusive..18,590RMB / $3,000USD Company logo on conference bags Opportunity to provide company literature to include in bags One (1) Symposium Registration (Value: 1,984RMB / $320USD) Refreshment Break 4 Opportunities (Day 1- both AM/PM, Day 2- both AM/PM)...........................22,000RMB / $3,500USD each Company recognition on break signage Company logo on beverage napkins One (1) Symposium Registration (Value: 1,984RMB / $320USD) SAE Members save on most SAE publications, conferences, seminars and more! 9
Marketing Solutions SILVER LEVEL Registration Area & Conference Lanyards Exclusive 34,000RMB / $5,484USD Company recognition on attendee pre-registration confirmation emails Opportunity to place company materials near registration Company recognition on conference lanyards Two (2) Symposium Registrations (Value: 1,984RMB / $320USD) GOLD LEVEL Networking Lunch 2 Opportunities 49,000RMB / $7,900USD each Opportunity for 20-minute speaking presentation for sponsoring company executive Company recognition on lunch signage Company recognition on beverage napkins Two (2) Symposium Registrations (Value: 1,984RMB / $320USD) Keynote 2 Opportunities 49,000RMB / $7,900USD each Company recognition on keynote signage Opportunity for one company executive to deliver 2-3 minute welcome and introduction of keynote speaker Opportunity to provide 3-5 scrolling PowerPoint slides to be shown on AV screens as attendees are entering session Three (3) Symposium Registrations (Value: 1,984RMB / $320USD) Banquet or Dinner Reception Exclusive 49,000RMB / $7,900USD Opportunity for 20-minute speaking presentation for sponsoring company executive Company recognition on reception signage, including each food and/or bar station Company recognition on beverage napkins and drink ticket(s) Three (3) Symposium Registrations (Value: 1,984RMB / $320USD) 10 www.sae.org/events/lwf - Register by 9 August to Save!
Marketing Solutions Remark: Industry Sponsored Technical Presentation: Your company can benefit from a technical presentation in front of this targeted audience eager to learn as much as possible on Light-weighting. Choose your own hot topic within the Lightweighting subject and with your sponsorship. Mandatory Guidelines for sponsored presentation at an SAE International Technical Program SAE requires that presentations be delivered by highly credentialed technical specialists and not marketing or sales personnel Every Sponsored Speaking Session will be marketed and promoted with a Company X technical presentation, with all content reviewed by SAE International to ensure great technical value to SAE International attendees and audiences. In no way does SAE International suggest or endorse products, services or company content & comments. No product pitches allowed. No reference to or direct comparison to competitive product brands or companies is allowed. SAE International must ensure a technical value to the audience as a core competency of our global technical events. Presentation of corporate capabilities and/or product portfolio by the sponsoring company will be restricted to a short introduction and may not be included as a major topic in the materials or presentation. Presentation materials must be submitted in English to SAE International staff for review and approval in advance of the presentation. (The meetings group will need to decide how early the submission needs to be in for ample editing that may need to take place.) Ample time will be allowed for Q&A and other participant interaction. EVENT GUIDE AD PRICING Prices listed below are Exhibit/Sponsor gross rates. Non-exhibitor/sponsor rates are +20%. Inside Front Cover (includes color) 8,061RMB $1,300USD Inside Back Cover (Includes color) 6,200RMB $1,000USD Back Cover (includes color) 9,921RMB $1,600USD All 3 Covers (includes color) 18,602RMB $3,000USD Inside B/W Full Page 5,580RMB $900USD Inside B/W ½ horizontal Page 3,720RMB $600USD To discuss the vast array of solutions available to help meet your company s goals, contact: Global Sales Arlene DiSilvio Phone: 1-724-772-4060 Fax: 1-724-776-3087 Email: disilvio@sae.org China Sales Roy Luo Phone: +86-21-6131-2393 Fax: +86-21-2302-5988 Email: royluo@sae.org SAE Members save on most SAE publications, conferences, seminars and more! 11
SAE 2013 International Vehicle Lightweighting Forum September 10-11, 2013 Crowne Plaza Anting Golf Shanghai, China China Office Phone: +86-21-6131-2392 Fax: +86-21-2302-5988