COMPOSITE MATERIALS ELET.CA

COMPOSITE MATERIALS ELET.CA

CORAX Armors Elet.Ca armors are developed to ensure a superior level of ballistic protection and quality, employing typical aerospace industry techniques for the construction of composite materials parts. Armors are manufactured using specific pre-impregnated material, with the resin applied through a fully automated industrial process. This grants to the products an ideal saturation of the resin, thus eliminating porosities and voids between matrix and fibers, and ensuring an optimal bonding within layers. The panels meet the strictest military standards, as far as the environmental (MIL STD 810) and structural requirements are concerned. Armors can be delivered also turnkey, complete with the fixtures for fastening on the vehicle.

CORAX ANTI BULLET Mainly designed to be bulletproof. The following table shows the main features and level of protection. TYPICAL CONFIGURATIONS Corax type Ammunitions Norm Thickness (mm) Weight (kg/m 2 ) KF112 9 mm Parabellum UNI EN 1522 FB2 5.5 6.0 KF124 357 Magnum H.J.H.P. UNI EN 1522 FB4 11.0 11.5 KF124 44 Magnum H.J.H.P. UNI EN 1522 FB4 11.0 11.5 KR128 7.62 x 51 NATO Stell Jacket UNI EN 1522 FB6 18.0 33.0 KR132 7.62 x 51 NATO AP UNI EN 1522 FB7 22.0 47.0 KRC246 7.62 x 51 NATO ball STANAG AEP55 Liv. 1 19.0 37.0 KRC256 7.62 x 39 API STANAG AEP55 Liv. 2 19.0 37.0 KRC266 7.62 x 54 ball Drag. API STANAG AEP55 Liv. 3 24.0 55.0 KRC280 12.7 x 99 AP M2-29.0 75.0 KRC296 14.5 x 144 API STANAG AEP55 Liv. 4 40.0 115.0 Thickness 18 mm Weight 35 kg 7,62x51 NATO Ball SS109 LIV. 1 AEP55 Thickness 18 mm Weight 36 kg Kalashnikov - 7,62x39 API LIV. 2 AEP55 Thickness 23 mm Weight 54 kg Dragunov 7,62x54 API LIV. 3 AEP55 Thickness 23 mm Weight 54 kg Dragunov - 936 m/s 7,62x54 API LIV. 3 4569 Thickness 24,5 mm Weight 60 kg AP WC CORE 7,62x51 LIV. 3 4569

CORAX ANTI FRAGMENT Mainly designed to be installed inside the basic armor, in order to minimize the fragment effect and prevent the related fragmentation. The table shows the main features and level of protection. TYPICAL CONFIGURATIONS Corax type Speed (m/sec) - V50 Thickness (mm) Weight (kg/m 2 ) KF142 780 20.0 20.0 KF135 740 16.5 16.5 KF132 690 15.0 15.0 KR128 630 13.0 13.0 KF122 610 11.0 11.0 KF32/2 690 14.5 18.0 KF32/4 740 15.5 20.0 Ballistic protection examples, anti bullet panels

CORAX ARMORED DOORS Elet.Ca has developed Corax anti bullet panels for application in armored doors according to the most common UNI EN 1522 homologations: FB2 9 mm parabellum thickness 6 mm weight 6.0 kg/m 2 FB4 44 magnum and 357 magnum thickness 11 mm weight 12 kg/m 2 Thanks to the panels light weight, the substitution of door hinges is not required; inserting the panels into the door structure is also made easier. According to the door specifications, panels can be supplied with slots to accommodate locks, bars and handles. Corax panels can also be employed as the structure for the door itself and can be easily painted. In addition to anti-bullet properties, panels guarantee protection against pointed tools such as pick axes. Superior protection levels (eg. to diamond grinding wheels) can be obtained through panels of different composition and weight.

CORAX PERSONAL PROTECTION HARD PLATES Corax personal protection hard plates by Elet.Ca use resistance compared to boron carbide plates - up to level IV according to NIJ norms - while maintaining lower advanced composite materials and can be employed either as vests or as stand-alone plates in other military weight compared to traditional ceramic panels. or civilian applications. The use of innovative aluminium oxide (Al 2 O 3 ) compounds on the strike face and of different compositions in the backing allow for multi-hit ce levels based on specific technical Elet.ca can develop custom shapes, sizes and resistan- requirements.

CORAX PERSONAL PROTECTION HARD PLATES

CHARACTERISTICS IN COMBINATION WITH NIJ3A VEST Standard size: 250 mm x 300 mm - Curve: single curve or multi-curve LEVEL III LEVEL III+ LEVEL III++ LEVEL IV Weight* 1.3 kg 1.5 kg 1.6 kg 1.9 kg 2.2 kg 2.5 kg 2.4 kg 2.9 kg Thickness 18 22 mm 17 19 mm 17 19 mm 18 20 mm FMJ 7.62 mm x 51 mm / M80 7.62 mm x 51 mm / M80 7.62 mm x 51 mm / M80 7.62 mm x 51 mm / M80 AK 47 7.62 mm x 39 mm PS 7.62 mm x 39 mm PS 7.62 mm x 39 mm PS 7.62 mm x 39 mm PS MI93 5.56 mm x 45 mm 5.56 mm x 45 mm 5.56 mm x 45 mm 5.56 mm x 45 mm SS109 5.56 mm x 45 mm 5.56 mm x 45 mm 5.56 mm x 45 mm AK 47 7.62 mm x 39 mm APIBZ 7.62 mm x 39 mm APIBZ 30.06 7.62 mm x 54 mm LPS 7.62 mm x 63 mm AP DRAGUNOV 7.62 mm x 54 R API Note: panel weight varies according to the actual panel shape and to the customer s specifications CHARACTERISTICS AS STAND ALONE PLATE Standard size: 250 mm x 300 mm - Curve: single curve or multi-curve LEVEL III LEVEL III+ LEVEL III++ LEVEL IV Weight* 1.5 kg 1.7 kg 1.9 kg 2.2 kg 2.5 kg 2.8 kg 2.7 kg 3.3 kg Thickness 23 26 mm 20 24 mm 20 24 mm 22 25 mm FMJ 7.62 mm x 51 mm / M80 7.62 mm x 51 mm / M80 7.62 mm x 51 mm / M80 7.62 mm x 51 mm / M80 AK 47 7.62 mm x 39 mm PS 7.62 mm x 39 mm PS 7.62 mm x 39 mm PS 7.62 mm x 39 mm PS MI93 5.56 mm x 45 mm 5.56 mm x 45 mm 5.56 mm x 45 mm 5.56 mm x 45 mm SS109 5.56 mm x 45 mm 5.56 mm x 45 mm 5.56 mm x 45 mm AK 47 7.62 mm x 39 mm APIBZ 7.62 mm x 39 mm APIBZ 30.06 7.62 mm x 54 mm LPS 7.62 mm x 63 mm AP DRAGUNOV 7.62 mm x 54 R API Note: panel weight and thickness vary according to the actual panel shape and to the customer s specifications

CORAX PERSONAL PROTECTION HARD PLATES LEVELS OF PROTECTION TEST BULLET BULLET WEIGHT g Pistol and Revolver Threats BULLET VELOCITY ±10 m/s 2.22 caliber LR LRN 2.6 329.380 ACP FMJ RN 6.2 322 9 mm Para FMJ RN 8.0 341 40 S&W FMJ 11.7 322 9 mm Para FMJ RN 8.0 367.357 Magnum JSP 10.2 436 9 mm Para FMJ RN 8.0 436.44 Magnum JHP 15.6 436 7.62x25 TT FSJ 5.5 440 Typical RifleThreats 7.62x51 NATO ball 9.6 838 7.62x39 AK-47 MSC 7.9 720 5.56x45 SS-109 4.0 950 Armor-piercing Threats 7.62x39 AK-47 API 7.7 720 7.62x51 NATO AP 9.8 830 7.62x54R API 10.4 845.30 caliber M2 AP 10.8 869 TEST REPORT NORM NIJ STD 01.01.04 LEVEL IV

SPECIAL COMPONENTS 10 cm Elet.Ca develops and manufactures, also based on customer defined projects, any type of radomes, polarizers, covers and other technologically advanced equipment made of composite materials for civilian and military applications in the automotive, aerospace, naval and rail industries. Elet.Ca composite materials are manufactured according to dedicated formulas in order to guarantee specific properties of mechanical and thermal resistance, employing several types of fibres (carbon, aramide, silica, kevlar and others) and resins. Materials then go through internal product qualification processes. Elet.Ca production equipment include high-tech waterjet precision cutting, shaping and finishing tools for all custom-design components.

EXAMPLES OF COMPOSITE MATERIAL COMPONENTS Elet.Ca reserves the right to modify product specifications without notice, for the purpose of operating needs or efficiency improvements. According to applicable laws, any use of images, text and logotypes in this publication is forbidden.

ELET.CA via Pistoiese, 155/A 50058 Signa, Firenze - Italy phone +39. 055 895 19 44 fax +39. 055 895 44 29 info@eletca.it www.eletca.it www.marcegaglia.com rev. 11-2013