FITTINGS FOR TEMPERED GLASS

FITTINGS FOR TEMPERED GLASS

Contents The Company 03 Product List 04 Fittings Specifications 08 External Doors Closers & Cover Plates 12 Door Rails, Side Panel Rails & Fixing Rails 16 U Channel 18 Corner Patch Fittings 19 Pivots & Patch Pivots 21 Clamping Patches 24 Locks & Lock Keeps 28 Euro Profile Cylinders 37 Accessories 38 Internal Doors Latches 40 Latchkeeps & Strike Boxes 43 Pivots & Hinges for Internal Doors 46 Internal Door Hinges 47 Lever/Lever Handles 49 Handles Pull Handles 52 Pull Handles & Knobs 53 Sliding Door Handles 54 Shower Fittings Shower Door Hinges 55 Glass Clamps for Showers 59 Stabilising Bars 62 Shower Door Knobs 64 Shower Seals 65 Shower Seals & Profiles 68 Shower Accessories 69 Balustrade Clamps Balustrade Clamps 70 Cut outs Cut-out References 76 Other Door Systems 84 Hydraulic Patch Fitting 85 WINCAS 86 Computerised Estimating System Door Knobs 50

The Company The AHD policy has always been to keep our products contemporary in styling. At AHD, we believe in making things easier for specifiers and contractors. In line with this thinking we hold considerable in depth stock of a large range of products from Europe's leading manufacturers. There is dedicated design and estimating software available, full fitting instructions and installation staff training programme. Adding these features to the flexibility of response, sound technical advice and delivery times makes this range of products a truly exciting one. We specialise in Internet sales, providing a one stop shop for developers and one off projects. We welcome small quantity orders. Sales 0161 643 3399 Fax 0161 643 2299 Web www.ahdltd.com Email ahdltd@btconnect.com 03

Product List Part No. Section Page Part No. Section Page 021 Closers & Cover Plates 12 022 Closers & Cover Plates 12 023 Closers & Cover Plates 12 024 Closers & Cover Plates 12 025 Closers & Cover Plates 12 026 Closers & Cover Plates 12 027 Closers & Cover Plates 13 028 Closers & Cover Plates 13 0497 Bath Europrofile Cylinders 37 0497 T/T Europrofile Cylinders 37 051 Corner Patch Fittings 19 052 Corner Patch Fittings 19 053 Locks & Lock Keeps 28 054-65 Corner Patch Fittings 19 054-67 Corner Patch Fittings 20 055-63 Corner Patch Fittings 20 029 Closers & Cover Plates 13 055-67 Corner Patch Fittings 20 030 Closers & Cover Plates 13 0304 Closers & Cover Plates 12 0305 Closers & Cover Plates 12 0307 Closers & Cover Plates 12 0310 Closers & Cover Plates 13 0314 Closers & Cover Plates 12 0314A Closers & Cover Plates 13 0315 Closers & Cover Plates 12 0317 Closers & Cover Plates 12 0326 Closers & Cover Plates 13 0327 Closers & Cover Plates 13 0328 Closers & Cover Plates 13 032A-C Accessories 38 033 Accessories 38 056 Locks & Lock Keeps 28 058A Pivots & Pivot Patches 21 058B Pivots & Pivot Patches 21 058P Pivots & Pivot Patches 21 058R Pivots & Pivot Patches 21 058S Pivots & Pivot Patches 22 059 Pivots & Pivot Patches 22 061 Locks & Lock Keeps 29 062 Locks & Lock Keeps 30 063 Locks & Lock Keeps 30 064 Locks & Lock Keeps 30 065 Locks & Lock Keeps 30 066 Locks & Lock Keeps 31 071 Clamping Patches 24 0040 Latch Keeps & Strike Boxes 44 072 Pivots & Pivot Patches 22 0412-0415 Door Rails/ Side Rails 16 0422-0425 Door Rails/ Side Rails 16 0432-0435 Door Rails/ Side Rails 16 0442-0445 Door Rails/ Side Rails 16 073 Locks & Lock Keeps 31 074/075 Locks & Lock Keeps 31 076 Clamping Patches 24 077 Clamping Patches 24 0045 Latch Keeps & Strike Boxes 44 078 Clamping Patches 25 0472-0475 Door Rails/ Side Rails 17 047E Door Rails/ Side Rails 17 0482-0485 Door Rails/ Side Rails 17 0497 Europrofile Cylinders 37 0497 60mm Europrofile Cylinders 37 079 Clamping Patches 25 080 Clamping Patches 25 081 Clamping Patches 25 082 Clamping Patches 26 083 Pivots & Pivot Patches 23 04

Product List Part No. Section Page Part No. Section Page 084 Locks & Lock Keeps 32 085/086 Locks & Lock Keeps 32 087 Clamping Patches 26 088 Locks & Lock Keeps 32 089 Locks & Lock Keeps 32 091 Clamping Patches 26 092 Clamping Patches 26 093 Pivots & Pivot Patches 23 094 Pivots & Pivot Patches 23 095 Locks & Lock Keeps 33 096 Locks & Lock Keeps 33 097 Locks & Lock Keeps 33 098 Locks & Lock Keeps 33 10-001 Door Rails/ Side Rails 18 10-005 Door Rails/ Side Rails 18 105 Clamping Patches 27 106 Clamping Patches 27 12790 Pivots & Hinges 46 12791 Pivots & Hinges 46 13100 Pivots & Hinges 46 13200 Pivots & Hinges 46 14300 Locks & Lock Keeps 28 14600 Locks & Lock Keeps 28 14700 Locks & Lock Keeps 29 1502-1509 Corner Patch Fittings 19 1522-1525 Locks & Lock Keeps 28 15440 Latch Keeps & Strike Boxes 43 15441 Latch Keeps & Strike Boxes 43 15604 Lever/Lever Handles 49 15605 Lever/Lever Handles 49 15606 Lever/Lever Handles 49 15607 Lever/Lever Handles 49 15623 Door Knobs 50 15625 Door Knobs 50 15810 Latch Keeps & Strike Boxes 43 15820 Latch Keeps & Strike Boxes 43 1602-1605 Locks & Lock Keeps 30 16090 Locks & Lock Keeps 29 16190 Locks & Lock Keeps 34 1702-1705 Clamping Patches 24 1702B-1705B Pivots & Pivot Patches 22 1712-1719 Locks & Lock Keeps 31 1722-1725 Clamping Patches 24 1802-1805 Clamping Patches 25 1812-1819 Pivots & Pivot Patches 23 1822-1829 Locks & Lock Keeps 32 1832-1835 Clamping Patches 25 1842-1845 Locks & Lock Keeps 32 1892-1895 Clamping Patches 26 1902-1905 Clamping Patches 26 15100 Latches 40 19091 Balustrade Clamps 75 15102 Latches 40 19092 Balustrade Clamps 75 15106 Latches 40 19094 Balustrade Clamps 75 15112 Latches 40 19115 Pull Handles 51 1512-1519 Locks & Lock Keeps 28 19116 Pull Handles 52 15200 Latches 41 19117 Pull Handles 52 15202 Latches 41 1912-1915 Pivots & Pivot Patches 23 15206 Latches 41 19123 Pull Handles 51 15212 Latches 41 19170/1 Pull Handles 53 05

Product List Part No. Section Page Part No. Section Page 1922-1925 Locks & Lock Keeps 33 1932-1935 Locks & Lock Keeps 33 1952-1954 Pivots & Pivot Patches 23 19mm D Pull Handles 52 2914 Closers & Cover Plates 15 30610 Closers & Cover Plates 15 30800 Closers & Cover Plates 15 3102 Closers & Cover Plates 14 3103 Closers & Cover Plates 14 3112 Closers & Cover Plates 14 5401 Shower Door Knobs 53 5B01 Sliding Door Handles 54 5BN0 Sliding Door Handles 54 5F01 Stabilising Bars 62 5F01A Stabilising Bars 62 5F04 Stabilising Bars 62 5F07 Stabilising Bars 62 5F08 Stabilising Bars 63 5F09 Stabilising Bars 63 5F10 Stabilising Bars 63 3113 Closers & Cover Plates 14 6640 Latches 42 3114 Closers & Cover Plates 14 6645 Latches 42 3122 Closers & Cover Plates 14 3123 Closers & Cover Plates 14 4032-4035 Pull Handles 51 4062/4 Accessories 38 4-121 Sliding Door Handles 54 4-230 Pull Handles 53 4-281 Door Rails/ Side Rails 17 4302 Door Rails/ Side Rails 17 4302A Door Rails/ Side Rails 17 4302P Door Rails/ Side Rails 18 4410 Glass Clamps for Showers 59 4411 Glass Clamps for Showers 59 4414 Glass Clamps for Showers 59 4415 Glass Clamps for Showers 60 4418 Glass Clamps for Showers 60 4419 Glass Clamps for Showers 60 4428 Glass Clamps for Showers 61 4429 Glass Clamps for Showers 61 4500 Glass Clamps for Showers 61 4502 Glass Clamps for Showers 61 46300 Clamping Patches 27 5400 Shower Door Knobs 53 6840 Latch Keeps & Strike Boxes 45 6845 Latch Keeps & Strike Boxes 45 6870 Latch Keeps & Strike Boxes 45 6875 Latch Keeps & Strike Boxes 45 6M10 Accessories 39 6M12 Accessories 39 6M15 Accessories 39 8010 Pivots & Hinges 47 8011 Pivots & Hinges 47 8015 Pivots & Hinges 47 8060 Pivots & Hinges 47 8201 Closers & Cover Plates 14 8202 Closers & Cover Plates 14 8400 Shower Door Hinges 55 8401 Shower Door Hinges 55 8410 Shower Door Hinges 55 8411 Shower Door Hinges 55 8500 Shower Door Hinges 56 8500R Shower Door Hinges 56 8501 Shower Door Hinges 56 8501R Shower Door Hinges 56 8505 Shower Door Hinges 56 06

Product List Part No. Section Page Part No. Section Page 8505R Shower Door Hinges 56 8506 Shower Door Hinges 57 8506R Shower Door Hinges 57 8507 Shower Door Hinges 57 8507R Shower Door Hinges 57 8560 Shower Door Hinges 57 8565 Shower Door Hinges 58 8566 Shower Door Hinges 58 B0096 Locks & Lock Keeps 36 B93 Sliding Door Handles 54 B94 Locks & Lock Keeps 35 B95 Locks & Lock Keeps 35 B96 Locks & Lock Keeps 36 B97 Locks & Lock Keeps 36 G.02.0 Locks & Lock Keeps 34 G.04. 01 Latches 42 8567 Shower Door Hinges 58 G06.0 Latches 42 8700 Pivots & Hinges 48 8701 Pivots & Hinges 48 8705 Pivots & Hinges 48 8P06 Door Rails/ Side Rails 18 8P06 Shower Seals 68 8P08 Door Rails/ Side Rails 18 8P08 Shower Seals 68 8P10 Door Rails/ Side Rails 18 8P10 Shower Seals 68 8PI1-32 Shower Seals 68 8PT1-10 Shower Seals 65 8PT1-20 Shower Seals 65 8PT1-60-61 Shower Seals 68 8PT8-10 Shower Seals 65 G09.01 Latch Keeps & Strike Boxes 44 G09.01T Latch Keeps & Strike Boxes 44 IL700C Locks & Lock Keeps 34 IL701C Locks & Lock Keeps 34 LBM Lock Locks & Lock Keeps 35 R50SD Balustrade Clamps 74 Safety Pin Balustrade Clamps 73 SC201 Balustrade Clamps 70 SC202 Balustrade Clamps 70 SC203 Balustrade Clamps 70 SC204 Balustrade Clamps 71 SC205 Balustrade Clamps 71 SD50W30 Balustrade Clamps 73 SD50W30T Balustrade Clamps 73 8PT8-20 Shower Seals 65 SP227 Balustrade Clamps 74 8PT8-25 Shower Seals 66 8PT8-30 Shower Seals 66 8PT8-35 Shower Seals 66 8PT8-40 Shower Seals 66 8PT8-45 Shower Seals 67 8PT8-50 Shower Seals 67 8PT8-60/61 Shower Seals 67 SP8500 Shower Accessories 69 SS200 Balustrade Clamps 71 SS201 Balustrade Clamps 72 SS320 Balustrade Clamps 72 SS321 Balustrade Clamps 72 TC10 Shower Accessories 69 VT10 Shower Accessories 69 8PT8-70/71 Shower Seals 68 AG100W30 Balustrade Clamps 74 B0094 Locks & Lock Keeps 35 07

Fittings Specifications Product In selecting doors for any given situation, it is important to determine the direction of swing of doors in conjunction with the requirements of pedestrian traffic, fire departments and other uses. Consideration should be given to the need to protect an entrance from undesirable effects of the weather such as driving rain or strong winds. It may be necessary to set the entrance in from the general plane of the façade or provide a draught lobby. Fittings All SPEEDY floor springs have positional adjustment for width, height, length and diagonal alignment. Two separate valves independently control the closing and latching speeds of the door. The closing action of the door starts at 115 and ends at 0. Full instruction leaflets are given with each floor spring. It is important to allow room for the swing of the doors and their furniture and to provide adequate stops where over swing can occur. Consideration should be given to employing smaller door leaves, weaker floor springs, or both, where the elderly or infirm persons are able to operate them. In such circumstances it is important to take due account of wind action and the DDA regulations. Where doors are situated above a step(s) a platform should be provided to stand on whilst operating the door. It is bad practise to have a step up or down when passing through a doorway. Edge cover and clearances Flush channel In the case of a channel sunk into the structural face, the minimum recommended glass cover is 12mm. To guard against this cover being decreased, we suggest therefore, a nominal cover of 20mm. This allows for variations in the opening and for glass size tolerances. The clearance between the glass and the inside of the channel should not be less than 3mm. Surface Mounted channel The minimum requirements for the positioning of glass in a surface mounted application are the same as for flush channel. To allow for varying thicknesses of glazing channels, a minimum of 7mm has to be allowed between the glass and the structure. The floor springs are colour coded for three strengths with retention at 90 and non retention available in each strength. All SPEEDY floor springs have a light hold-open position from 115-175. See separate table for floor spring specification on page 10/11. Handles and rules for hole requirements See page 51/54 for handle types available from stock. Bespoke handles will incur extra cost and lead time. Please consult with the glass processor for the position of holes in Tempered/Tempered Laminated glass. Door Rails The door rail consists of three split pressure cast alloy clamping blocks which contain the pivot connections and lock bodies. These clamping blocks are joined together by two aluminium extrusions which are grooved to take the slide on cover plates. These cover plates are finally retained by screwing on an end cap to each end of the rail. Patch fittings Patch fittings perform the function of linking panels and fins together and contain items such as locks, pivots, pivot adaptors etc., for doors, side panels and transoms. They consist of a split pressure cast alloy body, which clamps with gaskets and insulating bushes to the glass. Aluminium or stainless steel cover plates clip around the body and are retained by small grub screws. Gaskets will be supplied to suit 10mm glass unless otherwise specified. A TORQUE WRENCH MUST BE USED ON DOOR RAILS AND PATCH FITTINGS. SETTING 14 16 NM 08

Fittings Specifications All fittings are available in a choice of standard finishes as shown. Other finishes can be obtained for which enquiries must be submitted and may entail an extended delivery period. Stock We will endeavour to carry the items in this catalogue in stock; however it may be prudent to check prior to ordering. Non Stock Items For situations which require non stock items an extended delivery period will apply. Locking All locks are manufactured to suit a double euro profile cylinder. The standard arrangement is for cylinders to be keyed alike, please specify individual keying. Other Glass thicknesses Door rails and patch fittings can be supplied to suit thicker glasses upon request. However these items may entail an extended delivery period. Please check for full details. Rules on Aspect Ratio Please consult tempered glass manufacturer. Glass Weights Thickness (mm) 10 12 Weight (kg/m 2 ) 25.0 30.0 Maximum sizes of Doors Thumbturn and Thumbturn bathroom cylinders are available. Customers can use their own cylinder systems, provided they are compatible with the profile illustrated below. Fins When should a fin be used? As a general guide, when the height of the transom plus the width of the adjacent side panel exceeds a total of 1400mm a fin is required. This is to cope with the load imposed on the assembly by the action of the door(s) and the external wind loads. The fins must be securely fixed to a suitably rigid structure at the top of the assembly. PLEASE NOTE Technical specifications for Tempered/Tempered Laminated glass are guidelines only. Please consult your glass processor for full information. Glass Door rails and patch fittings are supplied to suit 10mm and 12mm Tempered/Tempered Laminated glass. Please specify glass thickness with order to ensure that you receive the correct gaskets. Delivery We aim to deliver stock items in 1-2 days. Door rails, which have an element of manufacture and construction, 2-3 days. Orders for large quantities may affect the above. 09

Fittings Specifications Glazing Techniques It must be stressed that glass to metal contact must be avoided at all times. It is strongly recommended that the cover plates should not be fitted until completion of a job as part of the normal protection employed on site for this type of work. This is to avoid unnecessary damage, especially where there is likely to be continuous movement of personnel and materials. It is advisable to indicate the presence of glass during installation. Structural Movements It is vitally important, at the planning stage of a Glass Assembly, to take into account any possible movements in the structure due to thermal, liveload and deadload movements. These need to be accommodated in such a way that the assembly, being ground based, should always have sufficient clearance between the glass edge and the structure on the top and sides of the assembly. Door Clearances Floor Spring Specification KS3000 SPECIFICATIONS Technical data: Doors weighing up to 120 kg Yellow force Red force Maximum door width Exterior Interior 90cm 110cm 100cm 120cm Cement case measurements: 80 x 270 x 56 Weight: 4.3 kg Note: 10

Fittings Specifications Floor Spring Specification M60 SPECIFICATIONS Technical data: Doors weighing up to 120 kg Yellow force Red force Maximum door width Exterior Interior 90cm 110cm 100cm 120cm Cement case measurements: 96.5 x 267.5 x 56 Weight: 5.1 kg M25 SPECIFICATIONS Technical data: Doors weighing up to 120 kg Maximum door width Exterior Interior Black force 110cm 140cm Cement case measurements: 130 x 283 x 65 Weight: 6.4 kg Note: OVERHEAD CONCEALED CLOSER SELECTION TABLE Door width Up to 750mm 751mm to 950mm 951mm to 1150mm Closer size 1 = Yellow 2 = Red 3 = Black Closing force 20 NM 27 NM 33 NM IMPORTANT INFORMATION It is the responsibility of the purchaser or specifier to ensure that the product ordered is appropriate to its application and that its use complies with all local and national legislation, building regulations, standards, and codes of practice and any other requirements. The descriptions and illustrations in this document shall not form part of any contract and/ or liability, howsoever arising, for the consequences of relying on them is hereby disclaimed. The right to alter specifications without prior notice is reserved. Publication of this document does not imply freedom from patents or other protective rights. 11

Closers & Cover Plates Speedy M60 Floor Closer Strength 021 Yellow Hold Open 022 Yellow No Hold Open 023 Red Hold Open 024 Red No Hold Open 267.5 96.5 56 Speedy M60 Floor Closer Cover Plates 0304 Satin Stainless Steel 0305 Polished Stainless Steel 0307 Polished Brass 123 286 Speedy M25 Floor Closer Strength 025 Black Hold Open 026 Black No Hold Open Speedy M25 Floor Closer Cover Plates 0314 Satin Stainless Steel 0315 Polished Stainless Steel 0317 Polished Brass 12

Closers & Cover Plates Speedy KS3000 Floor Closer Strength 027 Yellow Hold Open 028 Yellow No Hold Open 029 Red Hold Open 030 Red No Hold Open Speedy KS3000 Floor Closer Cover Plates 0326 Satin Stainless Steel 0327 Polished Stainless Steel 0328 Polished Brass 0310 Suspenson Box for KS3000 Floor Closer To cover the suspension box completely use part no 0314A below. Speedy SM25 Floor Closer Cover Plates To completely cover the suspension box 0314A Satin Stainless Steel 13

Closers & Cover Plates Overhead Concealed Closer Strength 3102 Yellow No Hold Open 3103 Yellow Hold Open 3112 Red No Hold Open 3113 Red Hold Open 3122 Black No Hold Open 3123 Black Hold Open Normally fitted into an aluminium box section supplied by others. Cover Plates not available for this product. 3114 65mm Pivot Point Fixing Bracket To be used with the Overhead Concealed Closer in conjunction with the Speedy top door rail. 8201 Triloba Bottom Door Closer Imitation Stainless Steel Matt Chrome Polished Chrome 8202 Triloba Top Door Closer Imitation Stainless Steel Matt Chrome Polished Chrome 14

Ø6.5 37 24 10 14 29 24 24 9.5 Closers & Cover Plates 24mm Spindle Extension 2914 Brass Bottom Strap 30610 Brass body 188 39 149 Bottom Strap 30800 Aluminium body 35 120 10 50 50 10 15

Door Rails, Side Panel Rails & Fixing Rails Bottom Door Rail Non-locking 0412 Satin Anodised Aluminium 0414 Satin Stainless Steel 0415 Polished Stainless Steel Glass deduction 55mm Bottom Door Rail Locking 0422 Satin Anodised Aluminium 0424 Satin Stainless Steel 0425 Polished Stainless Steel Glass deduction 55mm Top Door Rail Non-locking 0432 Satin Anodised Aluminium 0434 Satin Stainless Steel 0435 Polished Stainless Steel Glass deduction 55mm Top Door Rail Locking 0442 Satin Anodised Aluminium 0444 Satin Stainless Steel 0445 Polished Stainless Steel Glass deduction 55mm 16

Door Rails, Side Panel Rails & Fixing Rails Bottom Side Panel Rail 0472 Satin Anodised Aluminium 0474 Satin Stainless Steel 0475 Polished Stainless Steel 047E Side Rail End Cap DBA Glass deduction 62mm Supplied with one end cap Top Side Panel Rail 0482 Satin Anodised Aluminium 0484 Satin Stainless Steel 0485 Polished Stainless Steel 047E Side Rail End Cap DBA Glass deduction 58mm Supplied with one end cap Clamping Rail 4m Lengths End caps 4-281 SAA Satin Anodised Aluminium 4-281 ISS Imitation Stainless Steel Unsupported overpanels may require an alternative section ref 4-291 Satin Anodised Aluminium U Channel Dimensions 4302 3m Stock lengths 4302A 3m Stock lengths 3 3 4302A 4302 25 38 25 25 17

U Channel 8P06 Stainless Steel U channel 8P08 Stainless Steel U channel 8P10 Stainless Steel U channel 8P06 SSS 8P08 PSS 8P06 PSS 8P10 SSS 8P08 SSS 8P10 PSS Standard length 2200mm 6mm 8mm 10mm Bright Anodised U Channel 4302P Bright Anodised 10.24 19.05 Standard length 2490mm 14.3 20 x 20 Aluminium U Channel 10-001 ISS Imitation Stainless Steel 10-001 SAA Satin Anodised 6m Lengths for collection only 1m, 2m & 3m lengths available for delivery 20 x 40 Aluminium U Channel 10-005 ISS Imitation Stainless Steel 10-005 SAA Satin Anodised 6m Lengths for collection only 1m, 2m & 3m lengths available for delivery 18

Corner Patch Fittings 051 Bottom Patch with Adaptor Cover code 1502 Satin Anodised Aluminium 1504 Satin Stainless Steel 1505 Polished Stainless Steel 1508 GSM Satin Stainless Steel 1509 GSM Polished Stainless Steel Cut-out code T4-01 051 D Bottom Patch with Adaptor Cover code 1502 Satin Anodised Aluminium 1504 Satin Stainless Steel 1505 Polished Stainless Steel 1508 GSM Satin Stainless Steel 1509 GSM Polished Stainless Steel Cut-out code T4-01 To suit German Spindle 052 Top Patch with Adaptor Cover code 1502 Satin Anodised Aluminium 1504 Satin Stainless Steel 1505 Polished Stainless Steel 1508 GSM Satin Stainless Steel 1509 GSM Polished Stainless Steel Cut-out code T4-01 054-65 Top Patch with Adaptor for Overhead Concealed Closer Cover code 1502 Satin Anodised Aluminium 1504 Satin Stainless Steel 1505 Polished Stainless Steel 1508 GSM Satin Stainless Steel 1509 GSM Polished Stainless Steel Cut-out code T4-01 To be used in conjunction with a bottom door rail. Pivot point 65mm (68mm) 19

Corner Patch Fittings 054-67 Top Patch with Adaptor for Overhead Concealed Closer Cover code 1502 Satin Anodised Aluminium 1504 Satin Stainless Steel 1505 Polished Stainless Steel 1508 GSM Satin Stainless Steel 1509 GSM Polished Stainless Steel Cut-out code T4-01 To be used in conjuction with 055-67 Pivot point 67mm (70mm) 055-63 Bottom Freeswing Patch with Adaptor Cover code 1502 Satin Anodised Aluminium 1504 Satin Stainless Steel 1505 Polished Stainless Steel 1508 GSM Satin Stainless Steel 1509 GSM Polished Stainless Steel Cut-out code T4-01 To be used in conjunction with 052 Top Patch To be used in conjunction with 058B Pivot 055-67 Bottom Patch with Adaptor for Overhead Concealed Closer Cover code 1502 Satin Anodised Aluminium 1504 Satin Stainless Steel 1505 Polished Stainless Steel 1508 GSM Satin Stainless Steel 1509 GSM Polished Stainless Steel Cut-out code T4-01 To be used in conjunction with 054-67 Top Patch To be used in conjunction with 058B Pivot Pivot point 67mm (70mm) 20

Pivots & Patch Pivots 058A Adjustable Top Centre 058B Bottom Freeswing Pivot To be used in conjunction wiith 055-63 & 055-67 only 058P Top Centre Pivot (Patches) Satin Anodised Aluminium ø5,5 122 2,5 21,5 ø15 19 30 26 36 30 = = 56 66 29 058R Top Centre Pivot (Rails) Satin Anodised Aluminium ø5,5 126 2,5 21,5 ø15 19 30 28 38 30 = = 58 68 28 21

Pivots & Patch Pivots 058S Top Centre Pivot (Screw in) 059 Bottom Freeswing Pivot Satin Stainless Steel To be used with bottom door rails & 052 Patch fitting only 072 Transom/ Jamb Patch with Pivot Cover code 1502 Satin Anodised Aluminium 1504 Satin Stainless Steel 1505 Polished Stainless Steel 1508 GSM Satin Stainless Steel 1509 GSM Polished Stainless Steel Cut-out code T4-01 Fixing Bracket sold separately Fixing Bracket for 072 1702b 1704b 1705b Satin Anodised Aluminium Satin Stainless Steel Polished Stainless Steel Can be used with 071, 072, 073, 074 & 075 22

Pivots & Patch Pivots 083 Transom/Side Panel Patch with Pivot Cover code 1812 Satin Anodised Aluminium 1814 Satin Stainless Steel 1815 Polished Stainless Steel 1818 GSM Satin Stainless Steel 1819 GSM Polished Stainless Steel Cut-out code T4-01 and T4-06 093 Transom/Side Panel Patch with Pivot and Fin attachment Cover code 1912 Satin Anodised Aluminium 1914 Satin Stainless Steel 1915 Polished Stainless Steel Cut-out code T4-06 and T4-01, fin T4-13 094 Transom/Side Panel Patch with Pivot and Fin attachment Cover code 1952 Satin Anodised Aluminium 1954 Satin Stainless Steel 1955 Polished Stainless Steel Cut-out code T4-06 and T4-01, fin T4-13 23

Clamping patches 071 Transom/Jamb Patch Cover code 1702 Satin Anodised Aluminium 1704 Satin Stainless Steel 1705 Polished Stainless Steel Cut-out code T4-05 Fixing Bracket sold separately Fixing Bracket for 071 1702b 1704b 1705b Satin Anodised Aluminium Satin Stainless Steel Polished Stainless Steel Can be used with 071, 072, 073, 074 & 075 076 Head Fixing Angle Cover code 1722 Satin Anodised Aluminium 1724 Satin Stainless Steel 1725 Polished Stainless Steel Cut-out code T4-06 077 Head/Jamb Fixing Clamp Cover code 1702 Satin Anodised Aluminium 1704 Satin Stainless Steel 1705 Polished Stainless Steel Cut-out code T4-18 24

Clamping patches 078 Bottom Fixing Clamp Cover code 1702 Satin Anodised Aluminium 1704 Satin Stainless Steel 1705 Polished Stainless Steel Cut-out code T4-19 079 Jamb Fixing Clamp Cover code 1832 Satin Anodised Aluminium 1834 Satin Stainless Steel 1835 Polished Stainless Steel 50 104 33 Cut-out code T4-22 080 Four Panel Connector Item code 080-2 Satin Anodised Aluminium 080-4 Satin Stainless Steel 080-5 Polished Stainless Steel Cut-out code T4-08 (4 no), T4-06 (2 no) 081 Transom/Side Panel Patch Cover code 1802 Satin Anodised Aluminium 1804 Satin Stainless Steel 1805 Polished Stainless Steel Cut-out code T4-06 and T4-08 25

Clamping patches 082 Transom/Side Panel Patch with Stop Cover code 1802 Satin Anodised Aluminium 1804 Satin Stainless Steel 1805 Polished Stainless Steel Cut-out code T4-06 and T4-08 087 Transom Double Door Stop Cover code 1832 Satin Anodised Aluminium 1834 Satin Stainless Steel 1835 Polished Stainless Steel Cut-out code T4-06 091 Transom/Side Panel Fin Patch Cover code 1902 Satin Anodised Aluminium 1904 Satin Stainless Steel 1905 Polished Stainless Steel Cut-out code T4-06 and T4-08, fin T4-13 092 Transom/Side Panel Fin Patch Cover code 1892 Satin Anodised Aluminium 1894 Satin Stainless Steel 1895 Polished Stainless Steel Cut-out code T4-06 and T4-08, fin T4-13 26

Clamping patches 105 Four Panel Connector with Fin Item code 105-2 Satin Anodised Aluminium 105-4 Satin Stainless Steel 105-5 Polished Stainless Steel Cut-out code T4-08 (4 no), T4-06 (2 no) and T4-13 fin 106 Four Panel 90 o Connector Item code 106-2 Satin Anodised Aluminium 106-4 Satin Stainless Steel 106-5 Polished Stainless Steel Cut-out code T4-25 and T4-26 46300 Two Panel 90 o Connector Item code 46300-2 Satin Anodised Aluminium 46300-2 Satin Stainless Steel 46300-5 Polished Stainless Steel 77 77 30 30 A B 77 50 Cut-out code T4-23 and T4-24 27

Locks & Lock Keeps 053 Corner Patch with Lock Cover code 1512 Satin Anodised Aluminium 1514 Satin Stainless Steel 1515 Polished Stainless Steel 1518 GSM Satin Stainless Steel 1519 GSM Polished Stainless Steel Cut-out code T4-01 Europrofile cylinder not included 056 Centre Patch Lock Cover code 1522 Satin Anodised Aluminium 1524 Satin Stainless Steel 1525 Polished Stainless Steel Cut-out code T1-15 Europrofile cylinder not included 14300 Push over Shoot Bolt Item code 14300 ISS Imitation Stainless Steel 14300 SAA Satin Anodised Aluminium 14600 Bottom Lock Item code Complete with Covers 14600 SSS Imitation Stainless Steel 53 Cut-out code T1.12 26 ø11 10,5 65 28

Locks & Lock Keeps 14700 Bottom Lock with Thumbturn Item code Complete with Covers 14700 SSS Satin Stainless Steel 14 53 18 ø13 65 26 ø9 Cut-out code T1.12 16090 Push over Lock Item code Complete with Covers 16090 SAA Satin Anodised Aluminium 110 77 10mm Glass only Includes Half Cylinder 42 ø12 14 061 Bottom Lock Shoot Keep Item code Complete with Covers 061 Polished Stainless Steel 061 SAA Bottom Lock Shoot Keep Item code 061 SAA Satin Anodised Aluminium ø13 ø24,5 2 20 ø4 ø16 29

Locks & Lock Keeps 062 Head/Jamb Lock Shoot Keep 062 Satin Stainless Steel 063 Head Lock Shoot Keep with Stop 063 Satin Stainless Steel 064 Jamb Lock Shoot Keep with Stop 064 Satin Stainless Steel 065 Centre Side Panel Lock Shoot Keep Cover code 1602 Satin Anodised Aluminium 1604 Satin Stainless Steel 1605 Polished Stainless Steel Cut-out code T1-15 30

Locks & Lock Keeps 066 Centre Side Panel Lock Shoot Keep with Stop Cover code 1602 Satin Anodised Aluminium 1604 Satin Stainless Steel 1605 Polished Stainless Steel Cut-out code T1-15 073 Transom/Jamb Patch with Lock Shoot Keep Cover code 1712 Satin Anodised Aluminium 1714 Satin Stainless Steel 1715 Polished Stainless Steel 1718 GSM Satin Stainless Steel 1719 GSM Polished Stainless Steel Fixing Bracket sold separately 074/075 Transom/Jamb Patch with Lock Shoot Keep & Stop Cover code 1712 Satin Anodised Aluminium 1714 Satin Stainless Steel 1715 Polished Stainless Steel 1718 GSM Satin Stainless Steel 1719 GSM Polished Stainless Steel Fixing Bracket sold separately Fixing Bracket for 073, 074 & 075 1702b 1704b 1705b Satin Anodised Aluminium Satin Stainless Steel Polished Stainless Steel Can be used with 071, 072, 073, 074 & 075 31

Locks & Lock Keeps 084 Transom/Side Panel Patch with Lock Shoot Keep Cover code 1822 Satin Anodised Aluminium 1824 Satin Stainless Steel 1825 Polished Stainless Steel 1828 GSM Satin Stainless Steel 1829 GSM Polished Stainless Steel Cut-out code T4-01 and T4-06 085-086 Transom/Side Panel Patch with LSK and Stop Cover code 1822 Satin Anodised Aluminium 1824 Satin Stainless Steel 1825 Polished Stainless Steel 1828 GSM Satin Stainless Steel 1829 GSM Polished Stainless Steel Cut-out code T4-01 and T4-06 088 Transom Double Door Lock Shoot Keep Cover code 1842 Satin Anodised Aluminium 1844 Satin Stainless Steel 1845 Polished Stainless Steel Cut-out code T4-27 089 Transom Double Door Lock Shoot Keep with Stop Cover code 1842 Satin Anodised Aluminium 1844 Satin Stainless Steel 1845 Polished Stainless Steel Cut-out code T4-27 32

Locks & Lock Keeps 095 Transom/Side Panel Fin Patch with Lock Shoot Keep Cover code 1922 Satin Anodised Aluminium 1924 Satin Stainless Steel 1925 Polished Stainless Steel Cut-out code T4-06 and T4-01, fin T4-13 096 Transom/Side Panel Fin Patch with Lock Shoot Keep Cover code 1932 Satin Anodised Aluminium 1934 Satin Stainless Steel 1935 Polished Stainless Steel Cut-out code T4-06 and T4-01, fin T4-13 097 Transom/Side Panel Fin Patch with Lock Shoot Keep and Stop Cover code 1922 Satin Anodised Aluminium 1924 Satin Stainless Steel 1925 Polished Stainless Steel Cut-out code T4-06 and T4-01, fin T4-13 098 Transom/Side Panel Fin Patch with Lock Shoot Keep and Stop Cover code 1932 Satin Anodised Aluminium 1934 Satin Stainless Steel 1935 Polished Stainless Steel Cut-out code T4-06 and T4-01, fin T4-13 33

Locks & Lock Keeps 16190 Push over Lock Keep Item code Complete with Covers 16190 SAA Satin Anodised Aluminium 110 77 42 10mm Glass only Indicator Lock Glass to Wall IL700C Matt Chrome IL700C Polished Chrome Includes lock shoot keep Indicator Lock Glass to Glass IL701C Matt Chrome IL701C Polished Chrome Includes lock shoot keep Push Over Lock Glass to Glass G-02.0 10mm SSS G-02.0 12mm SSS A minimum gap of 4mm is required between doors 34

155 Locks & Lock Keeps Push Over Lock Glass to Glass LBM Lock SSS 10mm LBM Lock SSS 12mm A minimum gap of 4mm is required between doors B94 Hook Lock with finger pull B94 ISS Imitation Stainless Steel B94 SAA Satin Anodised 8/10mm Glass B0094 Lock Keep for B94 3 25 for B0094 ISS Imitation Stainless Steel B0094 Matt Matt B95 Lock Keep with finger pull for B94 B95 ISS Imitation Stainless Steel B95 SAA Satin Anodised 8/10mm Glass 35

Locks & Lock Keeps B96 Hook Lock B96 ISS Imitation Stainless Steel B96 SAA Satin Anodised 8/10mm Glass B0096 Lock Keep for B96 for B0096 ISS Imitation Stainless Steel B0096 Matt Matt B97 Lock Keep for Hook Lock for B96 B97 ISS Imitation Stainless Steel B97 SAA Satin Anodised 8/10mm Glass 36

Euro Profile Cylinders 51mm Europrofile Cylinder 0497 Nickel Cylinders can be keyed alike (30 maximum) or individual. 60mm Bathroom Cylinder 0497 Bathroom cylinder 60mm Thumbturn Cylinder 0497 T/Turn 60mm 0497 T/Turn 60mm KA Cylinders can be keyed alike (6 maximum) or individual. 60mm Europrofile Cylinder 0497 60mm KA Cylinders can be keyed alike (6 maximum) or individual. 37

Accessories Floor Stops 032A 032B 032C Satin Stainless Steel Polished Brass Satin Stainless Steel 032A Pepperpot 032B Brass 032C Oval Head Stop 033 Satin Stainless Steel Letter Box with 2 flaps 4062 Satin Anodised 4064 Imitation Stainless Steel Cut-out code L1-01 38

Accessories Magnetic Door Stopper 8mm / 10mm 6M10 ISS Imitation Stainless Steel 6M10 Matt Matt Chrome 6M10 Pol Polished Chrome Magnetic Door Stopper 12mm 6M12 ISS Imitation Stainless Steel 6M12 Matt Matt Chrome 6M12 Pol Polished Chrome Magnetic Plate for 6M10 & 6M12 6M15 ISS Imitation Stainless Steel 6M15 Matt Matt Chrome 6M15 Pol Polished Chrome 39

Latches 15100 Quadra Locking Latch Item code Complete with Covers 15100 ISS Imitation Stainless Steel 15100 SAA Satin Anodised Aluminium 15100 SSS Satin Stainless Steel 15100 PSS Polished Stainless Steel 10 12 165 17.5 29 68 Handles, cylinder and Lock Keep sold separately Cut-out code T1-14 8/10 15102 Quadra Non-locking Latch Item code Complete with Covers 15102 ISS Imitation Stainless Steel 15102 SAA Satin Anodised Aluminium 15102 SSS Satin Stainless Steel 15102 PSS Polished Stainless Steel 10 12 165 17.5 Handles and Lock Keep sold separately Cut-out code T1-14 29 68 8/10 15106 Quadra Locking Latch with Thumbturn Item code Complete with Covers 15106 ISS Imitation Stainless Steel 15106 SAA Satin Anodised Aluminium 15106 SSS Satin Stainless Steel 15106 PSS Polished Stainless Steel Lock one side only 10 12 165 17.5 Handles and Lock Keep sold separately Cut-out code T1-14 29 68 8/10 15112 Quadra Non-locking Latch Item code Complete with Covers 15112 ISS Imitation Stainless Steel 15112 SAA Satin Anodised Aluminium 15112 SSS Satin Stainless Steel 15112 PSS Polished Stainless Steel 10 12 165 17.5 Handles and Lock Keep sold separately Cut-out code T1-14 29 68 8/10 40

Latches 15200 Claustra Locking latch Item code Complete with Covers 15200 ISS Imitation Stainless Steel 15200 SAA Satin Anodised Aluminium 15200 SSS Satin Stainless Steel 15200 PSS Polished Stainless Steel 10 12 157 17.5 29 64 Handles, cylinder and Lock Keep sold separately Cut-out code T1-14 8/10 15202 Claustra Non-locking latch Item code Complete with Covers 15202 ISS Imitation Stainless Steel 15202 SAA Satin Anodised Aluminium 15202 SSS Satin Stainless Steel 15202 PSS Polished Stainless Steel 10 12 157 17.5 29 64 Handles and Lock Keep sold separately Cut-out code T1-14 8/10 15206 Claustra Locking Latch with Thumbturn Item code Complete with Covers 15206 ISS Imitation Stainless Steel 15206 SAA Satin Anodised Aluminium 15206 SSS Satin Stainless Steel 15206 PSS Polished Stainless Steel Lock one side only 10 12 157 17.5 Handles and Lock Keep sold separately 29 64 Cut-out code T1-14 8/10 15212 Claustra Non-locking latch Item code Complete with Covers 15212 ISS Imitation Stainless Steel 15212 SAA Satin Anodised Aluminium 15212 SSS Satin Stainless Steel 15212 PSS Polished Stainless Steel 10 12 157 17.5 Handles and Lock Keep sold separately 29 64 Cut-out code T1-14 8/10 41

Latches G04.0 Lever Latchset Item code Complete with Covers G04.0 SSS Satin Stainless Steel G04.0 BSS Bright Stainless Steel Includes handle and cylinder This item is handed G06.0 Lever Latchset no cut out Item code Complete with Covers G06.0 BSS Bright Stainless Steel Includes handle and thumbturn This item is handed 6640 Leverless Latch Cover code 6640 SAA Satin Anodised Aluminium 6640 SSS Satin Stainless Steel 6640 PSS Polished Stainless Steel 8/10mm Glass 6645 Leverless Dual Action Latch Cover code 6645 SAA Satin Anodised Aluminium 6645 SSS Satin Stainless Steel 6645 PSS Polished Stainless Steel 8/10mm Glass 42

Latchkeeps & Strike Boxes 15440 Jamb Strike Plate for Claustra/Quadra Latchsets 15440 Satin Stainless Steel 23 10 64 35 52 14 3 1.2 15441 Jamb Strike Plate for Claustra/Quadra Latchsets 15441 Satin Stainless Steel 15810 Quadra Strike Box Item code Complete with Covers 15810 ISS Imitation Stainless Steel 15810 SAA Satin Anodised Aluminium 15810 SSS Satin Stainless Steel 15810 PSS Polished Stainless Steel 180 7.5 8 / 10 68 Cut-out code T1-14 165 17.5 15820 Claustra Strike Box Item code Complete with Covers 15820 ISS Imitation Stainless Steel 15820 SAA Satin Anodised Aluminium 15820 SSS Satin Stainless Steel 15820 PSS Polished Stainless Steel 173 7.5 8 / 10 64 Cut-out code T1-14 157 17.5 43

Latchkeeps & Strike Boxes G09.01 Latch Keep for G04.0 & G06.0 G09.1 Satin Stainless Steel G09.01T Latch Keep with Stop for G04.0 & G06.0 G09.1T Satin Stainless Steel This item is handed 0040 Latch Keep for 6640 & 6645 0040 Satin Stainless Steel 0045 Latch Keep with Stop for 6640 & 6645 Complete with Covers 0045 Satin Stainless Steel 44

Latchkeeps & Strike Boxes 6840 Strike Box Cover code 6840 SAA Satin Anodised Aluminium 6840 SSS Satin Stainless Steel 6840 PSS Polished Stainless Steel 8/10mm Glass 6845 Strike Box with Stop Cover code 6845 SAA Satin Anodised Aluminium 6845 SSS Satin Stainless Steel 6845 PSS Polished Stainless Steel 8/10mm Glass 6870 Electric Strike Plate Item code 6870 ISS Imitation Stainless Steel Fail Secure AC/DC 12 Volt 6875 Electric Strike Box Cover code Complete with Covers 6875 SAA Satin Anodised Aluminium 6875 SSS Satin Stainless Steel 6875 PSS Polished Stainless Steel Fail Secure AC/DC 12 Volt 8/10mm Glass 45

Pivots & Hinges for Internal Doors 12790 Internal Door Pivot Patch Item code Complete with Covers 12790 SAA Satin Anodised Aluminium 12790 SSS Satin Stainless Steel 12790 PSS Polished Stainless Steel 38/40 118 8/10 6 50 Cut-out code T1-02 5 6/12 13/14 12791 Internal Door Pivot Patch Item code Complete with Covers 12791 SAA Satin Anodised Aluminium 12791 SSS Satin Stainless Steel 12791 PSS Polished Stainless Steel 118 8/10 40 6 50 Cut-out code T1-02 5 4 6/12 13/14 13100 Quadra Internal Door Hinge Item code Complete with Covers 13100 SAA Satin Anodised Aluminium 13100 SSS Satin Stainless Steel 13100 PSS Polished Stainless Steel 3.5 14 87 105 40 50 8 16.5 8 12 8/10 22/24 Cut-out code T1-03 13200 Claustra Internal Door Hinge Item code Complete with Covers 13200 SAA Satin Anodised Aluminium 13200 SSS Satin Stainless Steel 13200 PSS Polished Stainless Steel 3.5 14 85.5 103 Please note drilling detail differs from 13100 50 45 40 16.5 12 8/10 22/24 Cut-out code T1-04 46

Internal Door Hinges 8010 Biloba Self Closing Hinge 10mm 12mm 1000mm 100kg -10 C +50 C 0-80 8010 ISS Imitation Stainless Steel 8010 Matt Matt Chrome 8010 Pol Polished Chrome 1000mm 100kg -10 C +50 C 8011 Biloba Self Closing Hinge 10mm 12mm 1000mm 100kg -10 C +50 C +50 C 0-80 8011 ISS Imitation Stainless Steel 8011 Matt Matt Chrome 8011 Pol Polished Chrome 8015 Biloba Self Closing Hinge 10mm 12mm 1000mm 80kg -10 C +50 C 0-80 8015 ISS Imitation Stainless Steel 8015 Matt Matt Chrome 8015 Pol Polished Chrome 8060 Biloba Self Closing Hinge Single Action 10mm 12mm 1000mm 100kg 100kg -10 C +50 C 0-80 0-80 8060 ISS Imitation Stainless Steel 8060 Matt Matt Chrome 8060 Pol Polished Chrome -10 C +50 C 47

Internal Door Hinges 8700 Door Hinge 8mm 10mm 12mm 900mm 60kg 0-15 8700 ISS Imitation Stainless Steel 8700 Matt Matt Chrome 8700 Pol Polished Chrome 8701 Door Hinge 8mm 10mm 12mm 900mm 60kg 0-15 8701 ISS Imitation Stainless Steel 8701 Matt Matt Chrome 8701 Pol Polished Chrome 8705 Door Hinge 8mm 10mm 12mm 900mm 60kg 0-15 8705 ISS Imitation Stainless Steel 8705 Matt Matt Chrome 8705 Pol Polished Chrome 48

Lever/Lever Handles 15604 Lever Handles 15604 SSS Satin Stainless Steel 15604 Duo Dual 15604 PSS Polished Stainless Steel 60 ø 16 140 ø16 15605 Lever Handles 15605 SSS Satin Stainless Steel 15605 Duo Dual 15605 PSS Polished Stainless Steel 60 ø16 135 15606 Lever Handles 15606 SSS Satin Stainless Steel 15606 Duo Dual 15606 PSS Polished Stainless Steel 60 ø16 162 15607 Lever Handles 15607 SAA Satin Anodised 15607 SSS Satin Stainless Steel 15607 PSS Polished Stainless Steel 49

Door Knobs 15623 Door Knob 15623 SAA Satin Anodised 15625 Door Knob 15625 SAA Satin Anodised 15625 ISS Imitation Stainless Steel Technical Information NB: It is also possible to choose lever handles of other manufactures if they meet these standards. 50

Pull Handles Standard Pad Handle 4032 Satin Anodised Aluminium 4034 Satin Stainless Steel 4035 Polished Stainless Steel 19115 D Type Handle Hole diameter 16-18mm Hole centres 360mm 19115 SAA Satin Anodised Aluminium Picture for representation only. Actual handle may differ. 19115 D Type Handle Hole diameter 14-16mm Hole centres 350mm 19115 SSS Satin Stainless Steel 19115 PSS Polished Stainless Steel Picture for representation only. Actual handle may differ. 19123 E Type Handle Sizes o/all 600mm 1200mm 1800mm hole diam hole cent' 450mm 1050mm 1650mm 12mm 19123 SAA Satin Anodised Aluminium 19123 SSS Satin Stainless Steel 19123 PSS Polished Stainless Steel Picture for representation only. Actual handle may differ. 33mm Dia 51

Pull Handles 19116 Cranked D Type Handle 19116 SAA Satin Anodised Aluminium 19116 SSS Satin Stainless Steel 19116 PSS Polished Stainless Steel Picture for representation only. Actual handle may differ. 19117 Cranked C Type Handle 19117 SAA Satin Anodised Aluminium 19117 SSS Satin Stainless Steel 19117 PSS Polished Stainless Steel Picture for representation only. Actual handle may differ. D Handle 19mm D Handle 19mm Diameter Duo D Handle 19mm Diameter SSS D Handle 19mm Diameter PSS 14mm Diameter Hole in glass Elbaline Door Handle 4-230 Satin Stainless Steel Overall height Hole Centres Hole dia 450mm 300mm 20mm 52

Pull Handles & Knobs Tubo Locking Door Handle 19170 Satin Stainless Steel Tubo Locking Door Handle (One Sided) 19173 Satin Stainless Steel 5400 Door Knob 5400 Matt Matt Chrome 5400 Pol Polished Chrome 5401 Door Knob 5401 Matt Matt Chrome 5401 Pol Polished Chrome 53

Sliding Door Handles Shell Handle 70mm Dia 4-121 SSS B93 Handle for Sliding Door B93 ISS Imitation Stainless Steel B93 SAA Satin Anodised Aluminium 16mm Dia Holes 5B01 Handle for Sliding Door 5B01 ISS Imitation Stainless Steel 5B01 SAA Satin Anodised Aluminium 34mm Dia Hole 5BN0 Handle for Sliding Door 5B0 ISS Imitation Stainless Steel 5B0 SAA Satin Anodised Aluminium 14mm Dia Holes, 200mm Centres 54

Shower Door Hinges 8400 Glass to Wall hinge 6mm 8mm 10mm 800mm 44kg 8400 Matt Chrome 8400 Pol Chrome 8401 Glass to Glass hinge 6mm 8mm 10mm 800mm 40kg 8401 Matt Chrome 8401 Pol Chrome 8410 Glass to Wall rising hinge 6mm 8mm 10mm 800mm 44kg 8410 Matt Chrome 8410 Pol Chrome Order Left or Right handed 8411 Glass to Glass rising hinge 6mm 8mm 10mm 800mm 40kg 8411 Matt Chrome 8411 Pol Chrome Order Left or Right handed 55

Shower Door Hinges 8500 & 8500R Glass to Wall hinge 6mm 8mm 10mm 700mm 40kg 0-15 8500 Matt Chrome 8500 Pol Chrome 8500R Matt Chrome 8500R Pol Chrome R = Adjustable hinge 8501 & 8501R Glass to Wall hinge 6mm 8mm 10mm 700mm 40kg 0-15 8501 Matt Chrome 8501 Pol Chrome 8501R Matt Chrome 8501R Pol Chrome R = Adjustable hinge 8505 & 8505R Glass to Glass hinge 180 6mm 8mm 10mm 700mm 35kg 0-15 8505 Matt Chrome 8505 Pol Chrome 8505R Matt Chrome 8505R Pol Chrome R = Adjustable hinge 56

Shower Door Hinges 8506 & 8506R Glass to Wall hinge 90 6mm 8mm 10mm 700mm 35kg 0-15 8506 Matt Chrome 8506 Pol Chrome 8506R Matt Chrome 8506R Pol Chrome 40 25 8 16.5 8506 20 8.5 58.5 71.5 R = Adjustable hinge 8507 & 8507R Glass to Glass hinge 135 6mm 8mm 10mm 700mm 35kg 0-15 8507 Matt Chrome 8507 Pol Chrome 8507R Matt Chrome 8507R Pol Chrome R = Adjustable hinge 8560 Glass to Wall hinge Single action 6mm 8mm 10mm 700mm 40kg 0-15 8560 Matt Chrome 8560 Pol Chrome 57

Shower Door Hinges 8565 Glass to Glass hinge Single action 180 6mm 8mm 10mm 700mm 35kg 0-15 8565 Matt Chrome 8565 Pol Chrome 8566 Glass to Glass hinge Single action 90 6mm 8mm 10mm 700mm 35kg 0-15 8566 Matt Chrome 8566 Pol Chrome 8567 Glass to Glass hinge Single action 135 6mm 8mm 10mm 700mm 35kg 0-15 8567 Matt Chrome 8567 Pol Chrome 58

Glass Clamps for Showers 4410 Glass to Wall clamp 6mm 8mm 10mm 800mm 40kg 4410 Matt Chrome 4410 Pol Chrome 4411 Glass to Glass clamp 6mm 8mm 10mm 800mm 40kg 4411 Matt Chrome 4411 Pol Chrome 4414 Glass to Wall clamp 6mm 8mm 10mm 700mm 35kg 4414 Matt Chrome 4414 Pol Chrome 59

Glass Clamps for Showers 4415 Glass to Glass clamp 6mm 8mm 10mm 700mm 35kg 4415 Matt Chrome 4415 Pol Chrome 4418 Glass to Wall clamp 6mm 8mm 10mm 700mm 35kg 4418 Matt Chrome 4418 Pol Chrome 4419 Glass to Glass clamp 6mm 8mm 10mm 700mm 35kg 4419 Matt Chrome 4419 Pol Chrome 60

Glass Clamps for Showers 4428 Glass to Wall clamp 6mm 8mm 10mm 700mm 35kg 4428 Matt Chrome 4428 Pol Chrome 4429 Glass to Glass clamp 6mm 8mm 10mm 700mm 35kg 4429 Matt Chrome 4429 Pol Chrome 4500 Glass to Wall clamp 6mm 8mm 10mm 700mm 35kg 4500 Matt Chrome 4500 Pol Chrome 4502 Glass to Wall clamp 6mm 8mm 10mm 800mm 40kg 4502 Matt Chrome 4502 Pol Chrome 61

Stabilising Bars 5F01 Stabilising Bar 900mm 5F01A Stabilising Bar 1200mm 6mm 8mm 10mm 5F01 Matt Chrome 5F01 Pol Chrome 5F01A Matt Chrome 5F01A Pol Chrome 70 888 5F04 Stabilising Bar 6mm 8mm 10mm 5F04 Matt Chrome 5F04 Pol Chrome 70 1175 5F07 Stabilising Bar 6mm 8mm 10mm 5F07 Matt Chrome 5F07 Pol Chrome 62

Stabilising Bars 5F08 Stabilising Bar 6mm 8mm 10mm 5F08 Matt Chrome 5F08 Pol Chrome 5F09 Stabilising Bar 6mm 8mm 10mm 5F09 Matt Chrome 5F09 Pol Chrome 5F10 Stabilising Bar 6mm 8mm 10mm 5F10 Matt Chrome 5F10 Pol Chrome 63

Shower Door Knobs 5400 Shower Door Knob 6mm 8mm 10mm 5400 Matt Chrome 5400 Pol Chrome 5401 Shower Door Knob 6mm 8mm 10mm 5401 Matt Chrome 5401 Pol Chrome 64

Shower Seals 8PT8-10 Shower Seal 2.2m 8PT8-10 8PT1-10 Shower Seal 2.5m 8PT1-10 8PT8-20 Shower Seal 2.2m 8PT8-20 8PT1-20 Shower seal 2.5m 8PT1-20 65

37 Shower Seals 8PT8-25 Shower Seal 2.2m 8PT8-25 8PT8-30 Shower Seal 2.2m 8PT8-30 8PT8-35 Shower Seal 2.2m 8PT8-35 8PT8-40 Shower Seal 2.2m 8PT8-40 66

Shower Seals 8PT8-45 Shower Seal 2.2m 8PT8-45 8PT8-50 Magnetic Shower Seal 2.2m 8PT8-50 8PT8-60/61 Magnetic Shower Seal 2.2m 8PT8-60NS 8PT8-61SN 8PT1-60/61 Magnetic Shower Seal 2.5m 8PT1-60NS 8PT1-61SN 67

Shower Seals & Profiles 8PT8-70/71 Magnetic Shower Seal 2.2m 8PT8-70NS 8PT8-71SN 8PI1-32 Stainless Steel Seal 2.2m for 8PT8-60/61 & 8PT1-60/61 8PI1-32 Supplied separately 8P06 Stainless Steel U channel 2.2m 8P08 Stainless Steel U channel 2.2m 8P10 Stainless Steel U channel 2.2m 8P06 SSS 8P06 PSS 8P08 SSS 8P08 PSS 8P10 SSS 8P10 PSS 6mm 8mm 10mm 68

Shower Accessories SP8500 Adjustment Shim SP8500 TC10 Screw Covers VT10 Stainless Steel Screws VT10 Stainless Steel 69

Balustrade Clamps SC201 8/10/12mm Glass SC201 SSS SC201 PSS 16mm/18mm Hole SC202 8/10/12mm Glass SC202 SSS SC202 PSS 16mm/18mm Hole SC203 8/10/12mm Glass 180 o SC203 SSS SC203 PSS 16mm/18mm Hole 70

Balustrade Clamps SC204 8/10/12mm Glass 135 o SC204 SSS SC204 PSS 16mm/18mm Hole SC205 8/10/12mm Glass 90 o SC205 SSS SC205 PSS 16mm/18mm Hole SS200 8/10/12mm Glass SS200 SSS SS200 PSS Optional safety pin available L H Y 55mm 55mm 16mm 71

Balustrade Clamps SS201 8/10/12mm Glass SS201 SSS SS201 PSS Optional safety pin available L H Y R 55mm 55mm 16mm 25mm SS320 8/10/12mm Glass SS320 SSS SS320 PSS Optional safety pin available L H Y 60mm 55mm 16mm SS321 8/10/12mm Glass SS321 SSS SS321 PSS Optional safety pin available L H Y R 60mm 55mm 16mm 25mm 72

Balustrade Clamps Safety Pin for SS Clamps Safety Pin 6mm 1mm 15mm 22mm 6mm Dia SS200/201 = 28mm from base to centre of pin SS320/321 = 30mm from base to centre of pin 50mm Maxi Disc SSS SD50W30 Ø23mm 50mm Maxi Disc SSS SD50W30 T 23mm Dia hole 73

Balustrade Clamps 100mm Maxi Disc SSS AG100W30 Clamp for Fixing Lug SSS R50SD Stub Post Stainless Steel SP227 GF SP227 SM Grout Fixing Surface Mounted 74

Balustrade Clamps Alignment Clamp 19091 SAA 19091 ISS 10-12 45 Balustrade Clamp for thick glass 19092 SAA 19092 ISS w=50 30 3.5/7 50 50 38 2.5 C V 13.52 37 V 15 38 V 16.76 40 C V V 17.52 41 V 19 42 Balustrade Clamp for thick glass 19094 SAA 19094 ISS w=104 C V 27.5 4.0 C V 13.52 37 V 15 38 V 16.76 40 V 17.52 41 V 19 42 75

Cut out References T1.02 T1.03 T1.04 38 50 ø16/18 30 55 ø16 33 45 ø16 28 T1.12 T1.14 T1.15 60 62 54 ø42 39 55 79 59 63 32 ø18 T4.01 T4.05 T4.06 36 148 ø18 R10 ø18 36 R73 36 37 73 68 131 37 T4.07 T4.08 T4.13 91 ø18 187 ø18 ø18 36 ø16/18 36 170 R73 36 39 R9 36 107 36 42 T4.18 27 T4.19 ø25 T4.22 ø16/18 30 ø25 34 36 30 36 These drawings are NOT to scale 76

Cut out References 77 T4.23 T4.26 TC4.02 TC4.07 TC4.13 T4.24 T4.27 TC4.04 TC4.08 TC4.14 T4.25 TC4.01 TC4.06 TC4.11 TC4.15 34 18 45 18 45 36 ø18 34 36 ø18 ø16/18 36 36 77 271 299 R73 ø16/18 36 185/187 T4.01 T4.06 185/187 73/75 T4.22 T4.07 36 73/75 T4.06 T4.08 73/75 73/75 T4.08 73/75 36 T4.22 T4.24 T4.23 36 297/299 T4.01 73/75 36 T4.08 T4.06 73/75 T4.06 73/75 T4.08

Cut out References 4410 4411 4414 4415 4418 78

Cut out References 4419 4428 4429 4500 4502 5400 5401 79

Cut out References 6640, 6645, 6840, 6845 & 6875 8010, 8011 8015 8060 Valvola di regolazione velocità chiusura anta Adjuste de velocidad de cierre de la puerta Adjusment valve closing speed of glazed Regelsventil für die türschließgeschwindigkeit 8201 8202 8400 8401 80

Cut out References 8410 8411 8500, 8500R, 8501 & 8501R 8505 & 8505R 8506 & 8506R R 5 R 8 80 50 50 25 8 16.5 25 40 33 50 8506 20 8.5 58.5 71.5 50 ø14 8507 & 8507R 8560 MISMA MUESCA SAME NOTCH SELBES EINSCHNITT 81

Cut out References 8565 8566 8567 MISMA ESPIGAS SAME HOLES SELBES LÖCHER 8700 & 8701 8705 B94 & B95 B96 & B97 82

Cut out References G04.0 & G04.1T L1.01 IL 700C IL701C SC201 SC202 SC203 SC204 SC205 83

Other Door Systems Panic Hardware Panic Hardware available. Details and prices on request. Junior sliding stacking door system Sliding stacking door system incorporating various types of parking bay. Maximum leaf size 1000mm x 2800mm Elbaline Bi-Parting door system Point fixed sliding door system incorporating 2 solid stainless steel rods. Maximum leaf size 1300mm x 2600mm Pico Bi-Parting door system Bi-Parting door system incororating either a face fixed or ceiling fixed upper track. Maximum leaf weight 150kgs Minimum leaf size 700mm x 2050mm Fluxo Bi-Parting door system Point fixed sliding door system incorporating Mulpile solid stainless steel rods joined together. Maximum leaf size 1100mm x 2700mm Praktica & Variant sliding door systems Bi-Parting door system incororating either a face fixed or ceiling fixed upper track. Maximum leaf weight 150kgs Variant sliding stacking door system. Multi track sliding door system, allowing doors to stack at one end, or altenately pass each other. Maximum leaf weight 100/120kgs Invisible Connection It is an innovative hardware system for frameless glass folding doors exclusively equipped with patch fittings. The system hangs and slides in a top mounted track and the wings are aligned in a ʻUʼ brass profile hidden in the floor. All the hardware is available only in aluminium and its finishes. Tubo heavy duty point fixed pivoting door system Heavy duty pivoting door system. Suitable for glass 10mm, 12mm, 15mm & 17.52mm thick Maximum width 1500mm Maximum weight 125kgs Maximum size of each wing is 1000 x 3000mm. 84

Hydraulic Patch Fitting 85

Wincas The Wincas Computerised Estimating Programme The Wincas Computerised Estimating Programme is available to all AHD customers FREE of charge. The system enables speedy estimating of tempered glass entrances, internal glass doors and screens. Provides print outs of all fittings, glass sizes and cut out details. Full operating instructions and helpline are available. Phone 0161 643 3399 for the latest version 4. Free Computer Estimating System for Toughened Glass Entrance Systems Cuts estimating time from hours to minutes On screen scale layouts Fitting and glass prices can be printed out Can be used on site with laptop computer User friendly Over 2500 types of fittings 6 super finishes 3 day turnaround on door rails Free delivery 250,000 doors a year made with this system 86