POLYETHYLENE RIGID AND FLEXIBLE PIPES PRODUCT CATALOG

POLYETHYLENE RIGID AND FLEXIBLE PIPES PRODUCT CATALOG 2013

Products appearing in this catalogue may be covered by one or more of the following US Patent Nos. 7048010, 7588201 and other U.S. patents pending or corresponding issued or pending foreign patents All rights are reserved. You are specifically prohibited and not allowed to reproduce, copy, duplicate, manufacture, supply, sell, hire, distribute or adapt all or any part of this publication including any packaging. Netafim, are trademarks of Netafim Ltd., registered in the U.S. and other countries. We endeavor to provide accurate, quality and detailed information. However we cannot accept liability for your reliance on the provided information and you are advised to independently seek professional advice from Netafim and/or its authorized representatives. There is no undertaking by us that the provided information or any part thereof is accurate, complete or up to date. Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Netafim assumes no responsibility with regard to the performance or use of these products. In no event shall Netafim be liable for any indirect, incidental, special or consequential damages.

CONTENTS PE Irrigation pipes Data 4 Standard irrigation PE pipes 5-6 Netafim irrigation tubes and micro-tubes 7 PolyNet flexible pipe Data 8-9 Start connectors 10-11 Pipe connectors 12-13 FlatNet flexible pipe Data 14-15 Start connectors 16 Pipe connectors 17 Complementary products and Machinery 18 3

NETAFIM PE PIPES POLYETHYLENE PIPES, TUBES AND MICRO-TUBES APPLICATIONS For use in agricultural irrigation systems, water delivery systems, sprinkler and micro-sprinkler stands, assembly dripper sets and automation application. SPECIFICATIONS Standard irrigation pipes, produced according to SI 8779 that fit the International Standard ISO 8779. Tubes and Micro-tubes 3*5, 4*6.5, 6*8 and 9*12, produced according to Netafim quality standards for drippers, sprinkler and micro-sprinkler stands. Micro-tubes 8mm, produced according to Netafim quality standards for hydraulic command and automation systems. FEATURES AND BENEFITS All pipes are manufactured with UV and oxidation protection making them durable to solar radiation without significant damage for at least 50 years. Microorganisms or fungi do not attack PE pipes, either internally or externally. PE pipes are resistant to saline water, acid or alkaline solutions (excluding highly concentrated solutions) and to most substances employed in agricultural applications. Available in standard coil lengths, large diameter reels or pipe rods, to meet specific requirements. Made with the finest available low/medium density polyethylene resin, especially formulated to resist cracking and kinking, and to ensure long-term reliability. Precision manufacturing to ensure the uniformity of internal diameter and wall thickness. MARKING Each pipe can be identified by its external diameter and by its class (2.5, 4 or 6). On each 1 meter of the pipe there is a mark that represents the following: STANDARD IRRIGATION PIPES 1 NETAFIM IRRIGATION 20x1.5 PN 4 01 2009 PE 63 Technician ID Type of the Pipe Product Info. Ext. Dia. x Wall thickness PN Class Week / Year Raw material 4

MODEL Standard Irrigation PE Pipes Tie coils, catalog number : 40500-(any of bellow 6 digits) PIPE OD PN (CLASS) WALL THICKNESS I.D MAX. WORKING PRESSURE (BAR) RAW MATERIAL TIE COILS PIPE LENGTH 25 METER 200 METER 400 METER 12/2.5 12 2.5 1.00 10.00 2.50 LDPE 001210 001310 001360 001380 12/4 12 4 1.10 9.80 4.00 LDPE 003610 003710 003810 16/2.5 16 2.5 1.20 13.60 2.50 LDPE 002110 002210 002310 002410 002510 16/4 16 4 1.40 13.20 4.00 LDPE 004110 004210 004310 004410 004510 20/2.5 20 2.5 1.30 17.40 2.50 LDPE 003010 003110 003210 003330 20/4 20 4 1.50 17.00 4.00 LDPE 004810 004910 005010 005110 005130 25/2.5 25 2.5 1.40 22.20 2.50 LDPE 003465 003475 003480 003490 25/4 25 4 1.90 21.20 4.00 LDPE 005510 005610 005710 005910 32/4 32 4 1.45 29.10 4.00 LDPE 006205 006310 006410 40/4 40 4 1.75 36.50 4.00 MDPE 006650 006700 006900 007000 N/A 40/4 Soft 40S 4 3.00 34.00 4.00 LDPE 007300 007400 N/A 50/4 50 4 2.15 45.70 4.00 MDPE 007550 007600 007800 007900 N/A 50/4 Soft 50S 4 3.70 42.60 4.00 LDPE 008200 008300 N/A 63/4 63 4 2.70 57.60 4.00 MDPE 008500 008700 N/A Missing catalog numbers available upon request MODEL PIPE OD Standard Irrigation PE Pipes Stretched coils, catalog number : 40500-(any of bellow 6 digits) PN (CLASS) WALL THICKNESS I.D MAX. WORKING PRESSURE (BAR) RAW MATERIAL STRETCHED COILS PIPE LENGTH 25 METER 200 METER 400 METER 12/2.5 12 2.5 1.00 10.00 2.50 LDPE 001200 001300 001350 12/4 12 4 1.10 9.80 4.00 LDPE 003600 003700 003800 16/2.5 16 2.5 1.20 13.60 2.50 LDPE 002100 002200 002300 002400 002500 16/4 16 4 1.40 13.20 4.00 LDPE 004100 004200 004300 004400 004500 20/2.5 20 2.5 1.30 17.40 2.50 LDPE 003000 003100 003200 20/4 20 4 1.50 17.00 4.00 LDPE 004800 004900 005000 005100 25/2.5 25 2.5 1.40 22.20 2.50 LDPE 003412 003420 003430 003440 N/A 25/4 25 4 1.90 21.20 4.00 LDPE 00500 005600 005700 N/A 32/4 32 4 1.45 29.10 4.00 LDPE 006200 006300 006400 N/A N/A Missing catalog numbers available upon request MODEL PIPE OD Standard Irrigation PE Pipes Rod pipes, catalog number : 40500-(any of bellow 6 digits) PN (CLASS) WALL THICKNESS I.D MAX. WORKING PRESSURE (BAR) RAW MATERIAL ROD PIPES LENGTH 5.85 METER 11.85 METER 20/4 20 4 1.50 17.00 4.00 LDPE 004710 004720 25/4 25 4 1.90 21.20 4.00 LDPE 005410 005420 32/4 32 4 1.45 29.10 4.00 LDPE 006210 006220 40/4 40 4 1.75 36.50 4.00 MDPE 006710 006720 50/4 50 4 2.15 45.70 4.00 MDPE 007510 007520 63/4 63 4 2.70 57.60 4.00 MDPE 008420 008420 Missing catalog numbers available upon request 5

MODEL Standard Irrigation PE Pipes Coiled on metal drums, catalog number : 40500-(any of bellow 6 digits) PIPE OD PN (CLASS) WALL THICKNESS I.D MAX. WORKING PRESSURE (BAR) RAW MATERIAL BIG COILS PIPE LENGTH 12/2.5 12 2.5 1.00 10.00 2.50 LDPE 8000 001400 12/4 12 4 1.10 9.80 4.00 LDPE 8000 003900 16/2.5 16 2.5 1.20 13.60 2.50 LDPE 7000 002600 16/4 16 4 1.40 13.20 4.00 LDPE 7000 004600 20/2.5 20 2.5 1.30 17.40 2.50 LDPE 4500 003400 20/4 20 4 1.50 17.00 4.00 LDPE 4500 005300 25/2.5 25 2.5 1.40 22.20 2.50 LDPE 2700 003450 25/4 25 4 1.90 21.20 4.00 LDPE 2700 006000 32/4 32 4 1.45 29.10 4.00 LDPE 1800 006500 40/4 40 4 1.75 36.50 4.00 MDPE 1200 007100 40/4 Soft 40S 4 3.00 34.00 4.00 LDPE 50/4 50 4 2.15 45.70 4.00 MDPE 50/4 Soft 50S 4 3.70 42.60 4.00 LDPE 700 008350 Missing catalog numbers available upon request METER MODEL PIPE OD Standard Irrigation PE Pipes - colored gray Tie coils, catalog number : 40500-(any of bellow 6 digits) PN (CLASS) WALL THICKNESS I.D MAX. WORKING PRESSURE (BAR) RAW MATERIAL 12/2.5 12 2.5 1.00 10.00 2.50 LDPE 12/4 12 4 1.10 9.80 4.00 LDPE TIE COILS PIPE LENGTH 200 METER 400 METER 16/2.5 16 2.5 1.20 13.60 2.50 LDPE 002412 002415 002515 16/4 16 4 1.40 13.20 4.00 LDPE 004320 004420 20/2.5 20 2.5 1.30 17.40 2.50 LDPE 003120 003335 20/4 20 4 1.50 17.00 4.00 LDPE 005050 005150 25/2.5 25 2.5 1.40 22.20 2.50 LDPE 003483 25/4 25 4 1.90 21.20 4.00 LDPE 005720 005920 32/4 32 4 1.45 29.10 4.00 LDPE 006320 006420 006460 40/4 40 4 1.75 36.50 4.00 MDPE 006740 006920 N/A 50/4 50 4 2.15 45.70 4.00 MDPE 007820 N/A Missing catalog numbers available upon request MODEL PIPE OD Standard Irrigation PE Pipes - colored purple Tie coils, catalog number : 40560-(any of bellow 6 digits) PN (CLASS) WALL THICKNESS I.D MAX. WORKING PRESSURE (BAR) RAW MATERIAL TIE COILS PIPE LENGTH 16/4 16 4 1.40 13.20 4.00 000750 000800 000800 20/4 20 4 1.50 17.00 4.00 000900 000950 000950 25/4 25 4 1.90 21.20 4.00 001030 001050 001050 32/4 32 4 1.45 29.10 4.00 001130 001150 001150 40/4 40 4 1.75 36.50 4.00 001230 001250 001250 50/4 50 4 2.15 45.70 4.00 001330 001350 001350 63/4 63 4 2.70 57.60 4.00 001430 001450 001450 Missing catalog numbers available upon request 6

MODEL PIPE OD PIPE ID Netafim Irrigation PE tubes & micro-tubes Tie coils, catalog number : 40000-(any of bellow 6 digits) MAX. WORKING PRESSURE (BAR) RAW MATERIAL COLOR TIE COILS PIPE LENGTH 200 METER 500 METER 1000 METER 3*5 5.0 3.2 4.0 SPE Black 002000 002100 002200 002250 3*5 5.0 3.2 4.0 SPE Gray 002125 002135 002270 3*5 5.0 3.2 4.0 SSPE Black 002050 002220 3*5 5.0 3.2 4.0 SSPE Gray 002060 002120 002130 002260 4*6.5 6.5 4.0 4.0 SPE Black 004700 004800 004900 4*6.5 6.5 4.0 4.0 SSPE Black 004840 4*6.5 6.5 4.0 4.0 SSPE Gray 004850 004950 6*8 8.0 5.4 4.0 SPE Black 006510 006560 006580 9*12 12.0 9.0 4.0 SPE Black 005530 Missing catalog numbers available upon request Netafim Irrigation PE tubes & micro-tubes Cut pieces, catalog number : 40000-(any of bellow 6 digits) MODEL PIPE OD PIPE ID MAX. WORKING PRESSURE (BAR) RAW MATERIAL COLOR CUT PIECES PIPE LENGTH 0.15 0.30 0.60 0.90 1.00 1.20 1.50 3*5 5.0 3.2 4.0 SPE Black 002420 002500 002800 003000 003030 003065 3*5 5.0 3.2 4.0 SPE Gray 002545 002817 003032 003050 003033 3*5 5.0 3.2 4.0 SSPE Black 002520 002815 003015 003040 3*5 5.0 3.2 4.0 SSPE Gray 002540 002810 003020 003060 003080 4*6.5 6.5 4.0 4.0 SPE Black 005040 005100 005170 005220 005260 005340 4*6.5 6.5 4.0 4.0 SSPE Black 005015 4*6.5 6.5 4.0 4.0 SSPE Gray 005020 005070 005120 005190 005240 005280 005360 6*8 8.0 5.4 4.0 SPE Black 006160 006210 006260 006310 9*12 12.0 9.0 4.0 SPE Black 005460 005480 005490 005510 005520 Missing catalog numbers available upon request Cuttting pieces micro tubes can be suplied in any required lengh between 0.25 to 2.50 m. MODEL Netafim Irrigation PE tubes & micro-tubes Tie coils, catalog number : 40000-(any of bellow 6 digits) PIPE OD PIPE ID MAX. WORKING PRESSURE (BAR) RAW MATERIAL COLOR TIE COILS PIPE LENGTH 200 METER 500 METER 1000 METER 8 8.0 5.4 10.0 PE Black 012500 012600 012700 012550 8 8.0 5.4 10.0 PE Black+1 stripe Blue 012800 013300 013800 012850 8 8.0 5.4 10.0 PE Black+1 stripe Green 012900 013400 013900 012950 8 8.0 5.4 10.0 PE Black+1 stripe Red 013000 013500 014000 013050 8 8.0 5.4 10.0 PE Black+1 stripe White 013100 013600 014100 013150 8 8.0 5.4 10.0 PE Black+1 stripe Yellow 013200 013700 014200 013250 8 8.0 5.4 10.0 PE Black+2 stripe Blue 014300 014800 015300 014350 8 8.0 5.4 10.0 PE Black+2 stripe Green 014400 014900 015400 014450 8 8.0 5.4 10.0 PE Black+2 stripe Red 014500 015000 015500 014550 8 8.0 5.4 10.0 PE Black+2 stripe White 014600 015100 015600 014650 8 8.0 5.4 10.0 PE Black+2 stripe Yellow 014700 015200 015700 014750 8 8.0 5.4 10.0 PE Black+3 stripe Blue 016300 016800 8 8.0 5.4 10.0 PE Black+3 stripe Green 016400 016900 8 8.0 5.4 10.0 PE Black+3 stripe Red 016500 017000 8 8.0 5.4 10.0 PE Black+3 stripe White 016600 017100 8 8.0 5.4 10.0 PE Black+3 stripe Yellow 016700 017200 8 8.0 5.4 10.0 PE Black+4 stripe Blue 017800 018300 8 8.0 5.4 10.0 PE Black+4 stripe Green 017900 018400 8 8.0 5.4 10.0 PE Black+4 stripe Red 018000 018500 8 8.0 5.4 10.0 PE Black+4 stripe White 017600 018100 018600 8 8.0 5.4 10.0 PE Black+4 stripe Yellow 017700 018200 018700 Missing catalog numbers available upon request 7

NETAFIM FLEXIBLE PIPES POLYNET REINFORCED POLYETHYLENE FLEXIBLE PIPE & FITTINGS APPLICATIONS For use in agricultural, horticultural and portable water application systems. SPECIFICATIONS Compatible with ISO 16438 standard. Available in 2", 3", 4", 6", 8", 10", 12" diameters. Maximum working pressure: According to pipe diameter and selected start connectors. Can be used as transportation blank pipe or as a dristribution pipe with integral connectors or with in field assembly start connectors in all the pipes diameters. Robust and durable reinforced polyethylene weaves. Light gray colored for high solar resistance, high chemical resistance and UV resistance. The pipe is made of 100% Polyethylene, totally recyclable material. Full line of branching connectors. Black strip for easy identification. FEATURES AND BENEFITS Flat and compact coil design, reduces freight and storage costs. Integral connectors reduce significant labor time and increase confidence in the connections between distribution pipes and laterals. Light and flexible, easily moved from one installation to another. User friendly and faster layout and retrieving process. Complete package, pipes, full range of branching connectors and a complete line of connectors for dripperlines and laterals. POLYNET TECHNICAL DATA POLYNET INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE (BAR) BLANK PIPE OR WITH INTEGRAL WELDED CONN. MAX. WORKING PRESSURE (BAR) IN-FIELD START CONN. 2" / 51mm. 51.5 0.85 53.2 2.0 1.2 3" / 78mm. 78.3 0.85 80.0 1.5 1.2 4" / 102mm. 102.5 0.85 104.2 1.5 1.2 6" / 163mm. 163.0 0.85 164.7 1.2 0.8 8" / 209mm. 209.0 0.85 210.7 1.0 0.8 10" / 260mm. 260.0 0.85 261.7 0.8 0.8 12" / 320mm. 320.0 0.85 321.7 0.6 0.5 8

POLYNET PACKAGE DATA POLYNET COIL LENGTH (M) DIMENSIONS WIDTH*DIAMETER (CM*CM) COIL WEIGHT BLANK / WITH CONNECTORS (KG) COIL PER PALLET (UNITS) COIL LENGTH (M) DIMENSIONS WIDTH*DIAMETER (CM*CM) COIL WEIGHT BLANK / WITH CONNECTORS (KG) COIL PER PALLET (UNITS) 2" / 51mm. 100 10.0*78 14 / 15 20 50 10.0*57 9 40 3" / 78mm. 100 14.2*78 20 / 21 14 50 14.2*57 11 / 14 28 4" / 102mm. 100 18.5*78 26 / 27 12 50 18.5*57 14 / 21 24 6" / 163mm. 100 27.5*78 36 /37 6 50 27.5*57 19 / 28 12 8" / 209mm. 100 33.5*78 48 / 49 6 50 33.5*57 25 / 38 12 10" / 260mm. 100 42.5*78 62 / 63 6 50 42.5*57 32 / 48 12 12" / 320mm. 100 51.5*78 72 / 73 4 50 51.5*57 37 / 55 8 POLYNET BLANK PIPES Catalog number : 43000-(any of bellow 6 digits) POLYNET BLANK PIPE BLANK PIPE 80 METER BLANK PIPE 2" / 51mm 001550 001560 001570 3" / 78mm 001605 001001 000990 4" / 102mm 001115 001105 001101 6" / 163mm 001635 001630 001625 8" / 209mm 001690 001680 001675 10" / 260mm 001780 001770 001760 12" / 320mm 002020 002000 001970 * 80 meter coils length can also be ordered POLYNET PIPES WITH INTEGRAL WELDED CONNECTORS Catalog number : 43000-(any of bellow 6 digits) POLYNET 0.50 (M) 0.50 (M) 0.70 (M) 0.70 (M) 0.75 (M) 0.75 (M) 0.80 (M) 0.80 (M) 2"/51 mm 015540 015500 015620 015600 015770 015750 015850 015800 3"/78 mm 017430 017428 017480 017470 017350 017520 4"/102 mm 020170 020160 020220 020200 019894 019893 020060 020055 6"/163 mm 020380 020370 020530 020520 020545 020542 8"/209 mm 021560 021555 021590 021585 10"/260 mm POLYNET 0.90 (M) 0.90 (M) 1.00 (M) 1.00 (M) 1.50 (M) 1.50 (M) 1.80 (M) 1.80 (M) 2"/51 mm 015890 015870 015920 015900 016020 016000 016070 016050 3"/78 mm 017630 017620 018300 018280 019860 019850 019820 019810 4"/102 mm 019897 019896 019945 019935 020120 020110 6"/163 mm 020630 020620 021000 020990 021130 021120 8"/209 mm 021865 021850 022070 022060 10"/260 mm 022278 022276 022298 022295 * Missing catalog numbers available upon request ** Other distances between integral welded connectors available upon request *** 80 meter coils length can also be ordered 9

START CONNECTORS FOR DRIPPERLINES To use with integral welded connectors PLN START CONNECTOR CATALOGUE NO. Fast ring w/blue ring connector 12X1/2" 10units/bag 32500-002395 Fast elbow ring w/blue ring connector 12X1/2" 32500-003360 Fast ring "T" w/blue rings connector 12X1/2"X12 32500-002565 Flare elbow connector 16 X 1/2" 100units/bag 32500-030900 Flare elbow connector 22 x 1/2" 100units/bag 32500-031500 Flare "T" connector 16 x 1/2" x 16 100units/bag 32500-033000 Flare "T" connector 22 x 1/2" x 22 100units/bag 32500-033500 Each bag include 2 tightening wrenches only for the 4 Flare model POLYNET START CONNECTORS FOR DRIPPERLINES To be use as in field assembly connectors PLN START CONNECTOR CATALOGUE NO. Ring 16 mm 100 units/bag 32500-024450 Ring 22 mm 100 units/bag 32500-024200 Barb 16 mm 100 units/bag 32500-024250 Barb 17 mm 100 units/bag 32500-024300 Barb 20 mm 100 units/bag 32500-024350 ¾" threaded male 100 units/bag 32500-024400 TOOLS To be used with in-field start connectors PRODUCT CATALOGUE NO. Punch 20 mm 45000-001570 Hexagonal fastener tool 1/2" 45000-003280 Tightener tool 45000-001670 10

FLATNET / POLYNET START CONNECTOR To be use as in-field start connector PRODUCT CATALOGUE NO. FTN & PLN start connector 32500-042300 TOOLS To be used with the in-field start connector PRODUCT CATALOGUE NO. Punch 16mm. F/FTN/PLN start conn. 45000-001590 Lay flat driver 3/8 ( Netafim ) 45000-003290 Thigthening wrench F/FTN/PLN start conn. 45000-002160 POLYNET FURROW START CONNECTOR To be use as an in field assembly connector PRODUCT CATALOGUE NO. Furrow start connector 32500-041000 TOOLS To be used with in-field furrow start connectors PRODUCT CATALOGUE NO. Punch 42 mm. 45000-001580 Fastener tool f/furrow start connector 45000-001680 Tightener tool f/furrow start connector 45000-001690 11

POLYNET CONNECTOR KITS COUPLING CONNECTION CATALOG NO. 2"/51 mm 43040-018000 3"/78 mm 43040-018150 4"/102 mm 43040-018300 6"/160 mm 43020-010750 8"/209 mm 43020-010800 10"/260 mm 43020-010850 12"/320 mm 43020-010900 Each kit includes 2 rubber gaskets and 2 metal rings ELBOW CONNECTION 2"/51 mm 43040-018900 3"/78 mm 43040-019000 4"/102 mm 43040-019100 6"/160 mm 43020-016500 8"/209 mm 43020-016550 10"/260 mm 43020-016600 12"/320 mm 43020-016650 Each kit includes 2 rubber gaskets and 2 metal rings "T" CONNECTION 2"/51 mm 43040-019500 3"/78 mm 43040-019600 4"/102 mm 43040-019700 6"/160 mm 43020-016730 8"/209 mm 43020-016770 10"/260 mm 43020-016850 12"/320 mm 43020-016920 Each kit includes 3 rubber gaskets and 3 metal rings "T" TRANSITION CONNECTION 3"-2"-3" (78 mm-51 mm-78 mm) 43040-020100 4"-3"-4" (102 mm-78 mm-102 mm) 43040-020200 8"-6"-8" (209 mm-160 mm-209 mm) 43020-016750 10"-8"-10" (260 mm-209 mm-260 mm) 43020-016800 12"-10"-12" (320 mm-260 mm-320 mm) 43020-016900 Each kit includes 3 rubber gaskets and 3 metal rings BARB X MTH BSP ADAPTOR 2"/50 mm 43040-018050 3"/78 mm 43040-018200 4"/102 mm 43040-018350 BARB X PVC SW ISO ADAPTOR 2"/50 mm - ISO 50/63 43040-018100 3"/78 mm - ISO 75/90 43040-018250 4"/102 mm - ISO 110 43040-018400 12

POLYNET CONNECTOR KITS TRANSITION CONNECTION 2"/51 mm - 3"/78 mm 43040-020300 3"/78 mm - 4"/102 mm 43040-020400 4"/102 mm - 6"/160 mm 43020-016980 6"/160 mm - 8"/209 mm 43020-017000 8"/209 mm - 10"/260 mm 43020-017050 10"/260 mm - 12"/320 mm 43020-017100 Each kit includes 2 rubber gasket and 2 metal rings FLANGE-BARB-FLANGE 6 /160 mm 43020-013600 8 /209 mm 43020-013620 10 /260 mm 43020-013640 Each kit includes 1 rubber gasket and 1 metal rings A flat wood drill bit and 2 metal support rings FLANGE-BARB 2"/51 mm 43040-030000 3"/78 mmm 43040-030100 4"/102 mm 43040-030200 6 /160 mm 43020-012600 8 /209 mm 43020-012620 10 /260 mm 43020-012640 12 /302 mm 43020-012645 Each kit includes 1 rubber gasket and 1 metal ring A flat wood drill bit and a metal support ring FLUSHING END LINE 2"/51 mm 43020-030300 3"/78 mm 43020-030400 4"/102 mm 43020-030500 6 /160 mm 43020-012780 8 /209 mm 43020-012800 Each kit includes 1 rubber gasket and 1 metal ring 10 /260 mm 43020-012820 12 /302 mm 43020-012830 13

NETAFIM FLEXIBLE PIPES FLATNET REINFORCED POLYETHYLENE FLEXIBLE PIPE & FITTINGS APPLICATIONS For use in agricultural, horticultural and other portable water application systems. SPECIFICATIONS Compatible with ISO 16438 standard. Available diameters: 2", 3" and 4". Maximum working pressure 3.0 bar at 50 Celsius degrees. Coil length: 50, 80 or 100 meter. Can be used as transportation blank pipe, as a distribution pipe with in-field stat connectors or as a distribution pipe with integral 1/2" female threaded connectors, distance between connectors must be defined at ordering time, according to the user needs. Robust and durable reinforced polyethylene weaves. White colored for high solar resistance, high chemical resistance and UV resistance. The pipe and the integral connectors are made of 100% Polyethylene, totally recyclable material. Red strip for easy identification. FEATURES AND BENEFITS Low expansion and zero axial elongation, no snaking. Flat and compact coil design, reduces freight and storage costs. Integral connectors reduce significant labor time and increase confidence in the connections between distribution pipes and laterals. Light and flexible, easily moved from one installation to another. User friendly and faster layout and retrieving process. Up to 80% lighter than other similar products. Complete package, pipes, full range of branching connectors and a complete line of connectors for dripperlines and laterals. 14

FlatNet Technical data FLATNET INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE (BAR) AT 50 DEGREES CELSIUS 2" / 51mm. 51.5 1.1 53.7 3.0 3" / 78mm. 78.3 1.1 80.5 3.0 4" / 102mm. 102.5 1.1 104.7 3.0 FlatNet package data FLATNET COIL LENGTH (M) DIMENSIONS WIDTH*DIAMETER (CM*CM) COIL WEIGHT (KG) COIL PER PALLET (UNITS) COIL LENGTH (M) DIMENSIONS WIDTH*DIAMETER (CM*CM) COIL WEIGHT (KG) COIL PER PALLET 2" / 51mm. 100 9.0*78 16.5 22 50 9.0*57 9.0 36 3" / 78mm. 100 14.0*78 29.5 14 50 14.0*57 15.0 28 4" / 102mm. 100 18.5*78 37.5 12 50 18.5*57 19.0 24 * 80 meter coils length can also be ordered (UNITS) FlatNet Blank Pipes Catalog number : 43000-(any of bellow 6 digits) FLATNET BLANK PIPE BLANK PIPE 80 METER BLANK PIPE 2" / 51mm. 000530 000520 000510 3" / 78mm. 000560 000555 000550 4" / 102mm. 000600 000590 000580 FlatNet Pipes with integral welded connectors Catalog number : 43000-(any of bellow 6 digits) FLATNET 0.5 (M) 1.0 (M) 1.2 (M) BETWEEN CONN, 1.5 (M) 1.8 (M) 5.0 (M) 8.0 (M) 10.0 (M) 2" / 51mm. 006200 006800 006900 006980 007240 007275 007360 3" / 78mm. 009470 010015 010030 010050 010100 010225 010280 010300 4" / 102mm. 013870 014035 014050 014100 014270 014300 *Missing catalog numbers available upon request **Other distances between integral welded connectors available upon request FLATNET 0.5 (M) 1.0 (M) 1.2 (M) BETWEEN CONN, 1.5 (M) 1.8 (M) 5.0 (M) 8.0 (M) 10.0 (M) 2" / 51mm. 006100 006760 006860 006940 007200 007265 007320 3" / 78mm. 009460 008504 008507 008550 008600 008735 008780 008800 4" / 102mm. 011850 012050 012100 012270 012300 *Missing catalog numbers available upon request **Other distances between integral welded connectors available upon request 15

START CONNECTORS FOR DRIPPERLINES to use with integral welded connectors FTN START CONNECTOR CATALOGUE NO. Flare elbow connector 16 X 1/2" 100units/bag 32500-030900 Flare elbow connector 22 x 1/2" 100units/bag 32500-031500 Flare "T" connector 16 x 1/2" x 16 100units/bag 32500-033000 Flare "T" connector 22 x 1/2" x 22 100units/bag 32500-033500 Flare elbow connector 16-17 X 1/2" 32500-025780 Each bag include 2 tightening wrenches FLATNET / POLYNET START CONNECTOR To be use as in-field start connector PRODUCT CATALOGUE NO. FTN & PLN start connector 32500-042300 TOOLS To be used with the in-field start connector PRODUCT CATALOGUE NO. Punch 16mm. F/FTN/PLN start conn. 45000-001590 Lay flat driver 3/8 ( Netafim ) 45000-003290 Thigthening wrench F/FTN/PLN start conn. 45000-002160 16

FLATNET CONNECTORS CATALOG NUMBER PRODUCT DESCRIPTION PRODUCT PICTURE 43040-018000 43040-018150 43040-018300 PLN/FTN Coupling Barb Con. 2" kit PLN/FTN Coupling Barb Con. 3" kit PLN/FTN Coupling Barb Con. 4" kit 43040-018050 43040-018200 43040-018350 PLN/FTN Barb Con. 2" * MTH BSP 2" kit PLN/FTN Barb Con. 3" * MTH BSP 3" kit PLN/FTN Barb Con. 4" * MTH BSP 4" kit 43040-018100 43040-018250 43040-018400 PLN/FTN Barb Con. 2" * SW ISO 50/63 kit PLN/FTN Barb Con. 2" * SW ISO 75/90 kit PLN/FTN Barb Con. 2" * SW ISO 110 kit 43040-018900 43040-019000 43040-019100 PLN/FTN Elbow Barb Con 2" kit PLN/FTN Elbow Barb Con 3" kit PLN/FTN Elbow Barb Con 4" kit 43040-019200 43040-019300 43040-019400 PLN/FTN Elbow Barb Con 2"*FTH BSP 2" kit PLN/FTN Elbow Barb Con 3"*FTH BSP 3" kit PLN/FTN Elbow Barb Con 4"*FTH BSP 4" kit 43040-018600 43040-018700 43040-018800 PLN/FTN Barb Con. 2" * FTH BSP 2" kit PLN/FTN Barb Con. 3" * FTH BSP 3" kit PLN/FTN Barb Con. 4" * FTH BSP 4" kit 43040-020500 43040-020600 43040-020700 PLN/FTN Cap Barb Con 2" kit PLN/FTN Cap Barb Con 3" kit PLN/FTN Cap Barb Con 4" kit 43040-019500 43040-019600 43040-019700 PLN/FTN Tee Barb Con 2" kit PLN/FTN Tee Barb Con 3" kit PLN/FTN Tee Barb Con 4" kit 43040-019800 43040-019900 43040-020000 PLN/FTN Tee Barb Con 2" * FTH BSP 2" kit PLN/FTN Tee Barb Con 3" * FTH BSP 3" kit PLN/FTN Tee Barb Con 4" * FTH BSP 4" kit 43040-020100 43040-020200 PLN/FTN Tee Barb Con 3" * 2" * 3" kit PLN/FTN Tee Barb Con 4" * 3" * 4"" kit 43040-020300 43040-020400 PLN/FTN Reducer Barb Con 3" * 2" kit PLN/FTN Reducer Barb Con 4" * 3" kit 43040-018500 PLN/FTN Barb Con. 4" * MTH BSP 3" kit 43040-030000 43040-030100 43040-030200 PLN/FTN Barb con. 2" X Flange ISO 63 kit PLN/FTN Barb con. 3" X Flange ISO 90 kit PLN/FTN Barb con. 4" X Flange ISO 110 kit 17

SPARE PARTS, FOR FlatNet OLD TYPE CONNECTORS KITS CATALOG NUMBER PRODUCT DESCRIPTION PRODUCT PICTURE 43040-003050 43040-006000 FTN/PLN MALE ADAPTOR 3" FTN/PLN MALE ADAPTOR 4" 43040-003070 43040-006050 FTN/PLN SPLIT RING 3" FTN/PLN SPLIT RING 4" 43040-000740 43040-003090 43040-006070 FTN/PLN RUBBER GASKET 2" FTN/PLN RUBBER GASKET 3" FTN/PLN RUBBER GASKET 4" 43040-003080 43040-006060 FTN/PLN "O" RING 3" FTN/PLN "O" RING 4" Hydraulic Layout and retrieving machine CATALOG NUMBER PRODUCT DESCRIPTION PRODUCT DRAW 77200-001110 LAYING & RECOILING MACHINE 2"-4" FTN/PLN Manual Layout and retrieving machine CATALOG NUMBER PRODUCT DESCRIPTION PRODUCT DRAW 77200-001130 MANUAL LAYING & RECOILING MACHINE 2"-4" FTN/PLN 18

06-0113-SPR-CT-0006-EN GROW MORE WITH LESS 20 WWW.NETAFIM.COM