Ejector, Series EBS push-in fitting electrical control, T-design with release valve with silencer

Similar documents
Ejector, Series EBS Thread connection pneumatic control, T-design with silencer

E/P pressure regulator, Series ED07 Qn= 1300 l/min Electr. connection: via signal connection Signal connection: input and output, Plug, M12, 5-pin

Mounting on manifold strip. Working pressure min./max. Max. particle size 5 µm. Connector standard ISO 15217

Flow and check valves Logic valves Logic valves (AND/OR) Brochure

Pressure regulators E/P pressure regulators Series EV04. Brochure

Pressure regulators E/P pressure regulators Series EV07. Brochure

Max. particle size 50 µm Max. oil content of compressed air

Flow and check valves Logic valves Pneumatic counters. Brochure

Max. oil content of compressed air Shock resistance max. (XYZ direction) Vibration resistance (XYZ direction) Quiescent current consumption

Max. oil content of compressed air Shock resistance max. (XYZ direction) Vibration resistance (XYZ direction) Quiescent current consumption

Pressure regulators E/P pressure regulators Series ED05. Brochure

Max. particle size 5 µm. Pressure for determining piston forces Repetitive precision. Polyurethane

Directional valves Mechanically operated Series CD07. Brochure

Pressure regulators E/P pressure regulators Series ED02. Brochure

Directional valves Electrically operated CL03 series-ev. Brochure

Max. particle size 50 µm

Max. oil content of compressed air

Directional valves Pneumatically operated, according to standard ISO , 18 mm, CD02-AL series. Brochure

Number of fingers 2. Max. particle size 5 µm. Pressure for determining forces

Directional valves Mechanically operated Series AP - inch. Brochure

Short-stroke cylinder, Series SSI Ports: M5 - G 3/8 double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread

5/2-way valve, Series ST Qn= 280 l/min pipe connection compressed air connection output: G 1/8 with spring return

Directional valves Pneumatically operated Series 740. Brochure

Directional valves Mechanically operated Series AP. Brochure

Multi-Stage Ejectors. Multi-Stage Ejectors SEM. Suction rate from 332 l/min to 2,370 l/min. Suitability for Industry-Specific Applications

Short-stroke cylinder, Series KHZ Ports: M5 - G 1/4 Single-acting, retracted without pressure Cushioning: elastic Piston rod: Internal thread

With Integral Filter and Silencer, Optional Vacuum Switch, Type VADM- Solenoid-Actuated Vacuum Generator with integral filter and silencer Type VADM-

Standards ISO Max. particle size 50 µm. Pressure for determining piston forces. Materials: Polyurethane

Valve terminal systems Valve terminal systems Series TC08. Brochure

Valve terminal systems Valve terminal systems Series TC15. Brochure

Standards NFE Max. particle size 50 µm. Pressure for determining piston forces. Materials:

Preparation of compressed air Supplementary products Pressure gauge. Brochure

Standards NFE Max. particle size 50 µm. Pressure for determining piston forces. Materials:

Sensor technologies Pressure sensors Series PE5. Brochure

Max. particle size 5 µm. Pressure for determining piston forces. Materials:

Standards ISO Max. particle size 50 µm. Pressure for determining piston forces 6 bar. Materials:

GSW-V. Application example. Special Gripper Vacuum Gripper. Weight 0.12 kg 0.39 kg. Clamping diameter 20 mm 32 mm

Vacuum generators 1.1. High vacuum levels of up to 93% Easy connection of holders and suction cups. Lightweight and compact design.

Rotary actuators Rack-and-pinion gears series TRR. Brochure

-Q- Temperature range C. -L- Operating pressure bar. Vacuum filters ESF Technical data. Function

VSG Series Features Descriptions VSG VSG VSG Descriptions Supply valve Descriptions Vacuum filter

Series BCP standard version double Stroke: mm

Rodless cylinders Rodless cylinders Series RTC. Brochure

Vacuum generation Compact ejectors

0322, 0324, Pilot Solenoid Valve, Plastic

Max. particle size 5 µm. Pressure for determining piston forces. Materials:

Vacuum generators Key features

Versions. Version with K VS Version with K VS 2.0. Fig. 1: Type 3967 Solenoid Valve

Vacuum generators OVEM

Air preparation units

LS 025 LS 035 In-line mounting Connection up to G¾ / -12 SAE Nominal flow rate up to 33 l/min / 8.7 gpm

Cylinder Accessories Piston rod mountings, series CM2 Rod clevises. Brochure

SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection

SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE

Control unit for valves with inflatable sealing system

1 0,1 0,1-70 0, , , , Cylinder bore <

Rodless cylinders Bellow actuator Bellow actuator with mounting ring, series BCR. Brochure

Air-Operated Double-Diaphragm. High Purity PTFE Pumps

Vacuum generators OVEM

3/2-way Solenoid Valve for pneumatics

nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel

Series PD directly operated solenoid valves

3/2-way and 2 x 3/2-way Rocker Solenoid Valve for pneumatics

nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel

Air preparation units

System 6000 Electropneumatic Converter for Direct Current Signals i/p Converter Type 6126

Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide

3/2-way Rocker Solenoid Valve for pneumatic systems

Intelligent Positioner

Exhaust Cleaner for Clean Room. Body size. Symbol Nil. Size 1/4 standard 3/8 standard 1/2 standard. Element construction. Stage 2 stage.

Series 581 ISO Pneumatic Directional Control Valves

Vacuum Ejector with Solid State Timer

Simple venturis, series GVP

VACUUM PUMP P5010. Profit from new vacuum technology

Type 3379 Pneumatic Actuator. Mounting and Operating Instructions EB 8315 EN

Blowers. SILENCE 54 ASO 55 ROBUST 56 AIRPACK 57 MONO 58 Frequency Converter 59 Accessories General Catalog Process Heat

Series PD directly operated solenoid valves

GWS. Application example. Tool Changing Gripper Change System. Handling weight up to 170 kg. Moment load M x up to 400 Nm

ISO Cylinders Compact Cylinders TC08 Series Plastic Finger Tight Fittings

KARL SCHNELL GRINDER SPECIFICATION: KS Process Automat B 22 Type l

System 6. ü ( System 6

Subject: Pneumatic Training Kit with portable Air Compressor

Electrically operated spool valve. The manual override is detent and is operated by screw driver.

Nozzle diameter: ø0.5, ø0.7, ø1.0, ø1.2. Features

Solenoid valves VOVG Product range overview

Intelligent Positioner

Standard Valves. Vacuum Technology.

TopControl Continuous

Vacuum pumps/generators Small

On-off Valves MS-EE, Inch Series Overview

Series ZQ. Compact Vacuum Ejector. One-touch fitting. Digital vacuum pressure switch With LED display. ZX ZR ZM ZH ZU ZL ZY ZQ ZF ZP ZCU AMJ Misc.

Cost effective. Productive. Compliant. GSW-M Magnetic Gripper

Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders

Series AN /Series AMC

Product. Information. A.u.K. Müller. Flow meter turbine, with shut-off device. Series Characteristics. Applications.

Vacuum generators OVEM

ES 074 ES 094 Tank top mounting Connection up G1¼ Nominal flow rate up to 80 l/min

Online data sheet. i15-em0123 Lock i15 Lock SAFETY LOCKING DEVICES

2/2 Pressure operated valves

Solenoid valves VUVB/valve terminals VTUB, NPT

Transcription:

Type Ejector Ambient temperature min./max. + C / + C Medium temperature min./max. + C / + C Working pressure min./max. 3 bar / 6 bar Medium Compressed air Max. particle size µm Oil content of compressed air mg/m³ - mg/m³ Protection class:with electrical connector IP4 Display LED 7 DC operating voltage 4 V Voltage tolerance DC - % / +% Status display LED Power.3 W consumption Solenoid valve Materials: Housing Seal Nozzle Release ring Silencers Polyamide, fiber-glass reinforced Acrylonitrile Butadiene Rubber Aluminum Polyamide Polyethylene Technical Remarks Note: All data refers to an ambient pressure of,3 bar and an ambient temperature of C. The pressure dew point must be at least C under ambient and medium temperature and may not exceed 3 C. Type Nozzle Ø Compressed air connection Vacuum connection+ Max. vacuum level at p.opt Max. suction capacity Part No. 3(R) (P) 3 (R) (V) (V) [mm] [%] [l/min] EBS-ET--NC. 84 7. R4746 EBS-ET-7-NC.7 Ø 4 Ø 4 8 6.8 R4746 EBS-ET--NO 86 3 R47463 EBS-ET--NO. Ø 6 Ø 8 84 7 R47464 (P) EBS-ET--NO 86 3 R4746 EBS-ET--NO. Ø 8 Ø 84 3 R47466 Part No. Air consumption at p.opt. Weight Fig. [l/min] [db] [db] [kg] R4746 4 3 8 R4746 4 9 6.3 Fig. R47463 48 9 6 R47464 8 7 7.6 Fig. NC = ejector line closed without current NO = ejector suction line open without current p.opt. = optimum working pressure Pneumatics catalog, online PDF, as of 6--9, AVENTICS S.à r.l., subject to change

Gripper and vacuum technology Vacuum generators Part No. Air consumption at p.opt. Weight Fig. [l/min] [db] [db] [kg] R4746 8 68 77.46 Fig. 3 R47466 3 7 78 NC = ejector line closed without current NO = ejector suction line open without current p.opt. = optimum working pressure Vacuum p depending on working pressure p 9 p [%] 8 7 6 4 3 = Ø nozzle. mm = Ø nozzle.7 mm, 3 3, 4 4,,4 6 p [bar] 744 9 p [%] 8 7 6 4 3 = Ø nozzle. mm = Ø nozzle. mm, 3 3, 4 4,, 6 p [bar] 74 Pneumatics catalog, online PDF, as of 6--9, AVENTICS S.à r.l., subject to change

3 = Ø nozzle. mm = Ø nozzle. mm 7396 Suction capacity qs depending on working pressure p 8 q [l/min] s 6 4 8 = Ø nozzle. mm = Ø nozzle.7 mm 6, 3 3, 4 4,,4 6 p [bar] 74 8 q [l/min] s 7 6 4 3 = Ø nozzle. mm = Ø nozzle. mm, 3 3, 4 4,, 6 p [bar] 74 Pneumatics catalog, online PDF, as of 6--9, AVENTICS S.à r.l., subject to change

4 Gripper and vacuum technology Vacuum generators = Ø nozzle. mm = Ø nozzle. mm 7397 Evacuation time te depending on vacuum p for l volume (with optimal operating pressure popt) 3 t [s/l] E = Ø nozzle. mm = Ø nozzle.7 mm 3 4 6 7 8 p [%] 746 7 t [s/l] E 6 4 3 3 4 6 7 8 = Ø nozzle. mm = Ø nozzle. mm P [%] 74 Pneumatics catalog, online PDF, as of 6--9, AVENTICS S.à r.l., subject to change

= Ø nozzle. mm = Ø nozzle. mm 7398 Air consumption qv depending on working pressure p 3 q [l/min] v 3 = Ø nozzle. mm = Ø nozzle.7 mm, 3 3, 4 4,,4 6 p [bar] 747 6 q [l/min] s 4 8 6 4, 3 3, 4 4,, 6 p [bar] 743 = Ø nozzle. mm = Ø nozzle. mm Pneumatics catalog, online PDF, as of 6--9, AVENTICS S.à r.l., subject to change

6 Gripper and vacuum technology Vacuum generators 4 q [l/min] v 3 3 = Ø nozzle. mm = Ø nozzle. mm, 3 3, 4 4,,, 6 p [bar] 7399 Fig. Ø4 M Ø 9 39 3, 4, 9 8 4 34, 8 4 3,,, 6,8 4 Solenoid valve for vacuum ON/OFF Release valve from memory 738 Pneumatics catalog, online PDF, as of 6--9, AVENTICS S.à r.l., subject to change

7 Fig. Ø 8 G/8 3,6 6,, 8,4 43,3, 4 4, 8 49, 6 39 9 6, 9, 4 7384 Solenoid valve for vacuum ON/OFF Solenoid valve for release pulse Fig. 3 7 6 8 7,4 G3/8 8 4, 4, 86, 74, 8 6 4 4, 6 76 Solenoid valve for vacuum ON/OFF Solenoid valve for release pulse 7387 Pneumatics catalog, online PDF, as of 6--9, AVENTICS S.à r.l., subject to change