Ultra-Matic Air Valve System Efficient Pumps, Competitive Upgrades and Accessories U2 Plastic Pumps Metallic Pumps Specialty Pumps Upgrade Kits Accessories Diaphragms
Ultra-Matic Air Valve Technology Simple. Efficient. Superior. 1 1 2 2 2 3 1 3 3 Air Valve Efficiency No costly air leakage (blow by) 1 U-cup seals expand to prevent air from leaking. 2 Lapped ceramic valve components maintain a dynamic seal and prevent air blow by and leakage. 3 Inset track gaskets provide a superior seal over traditional flat gaskets. Ease of Maintenance No special tools or training required 1 Air valve is easily accessible while the pump is still in line. 2 Air side wear components are easily replaceable using standard tools and techniques. Parts are available in economical kits or as individual components. 3 Pilot components are easily removed as a simple assembly. Extended In-Service Life Improved total cost of ownership 1 Self lubricating carboxylated seals and o-rings. 2 3 Precision low friction bearing surfaces help to reduce wear. Robust, single piece stainless steel pilot shaft and main shaft ensure durability. Superior Chemical Resistance and Material Options The Ultra-Matic incorporates many superior materials to deliver excellent chemical resistance, reduce repair cost, and extend service life. Some materials include: Stainless Steel Pilot and Main Shaft Ceramic Shoe, Diverter Polypropylene Center Block PVDF Valve Body 3-piece centers are available with multiple air chamber material and coatings options such as: Stainless steel PTFE coated aluminum Nickel plated aluminum 2
Ultra-Matic Air Valve Technology Simple. Efficient. Superior. U2 2 3 Air Intake How the U2 Works 1 A A B 4 A The pilot shaft (1) is mechanically shifted by contact from the inner diaphragm plate allowing air pressure to be directed behind one end of the valve spool (2), shifting it and holding it in place. B The valve spool actuates the ceramic air diverter (3), opening the right hand air chamber filling port (4) and directing compressed air into the air chamber () and behind the exhaust valve (6) keeping it closed so no air can escape. C Simultaneously, the pressure is relieved from the opposing exhaust valve (7) allowing it to open, and instantly exhausts the air chamber pressure to atmosphere. When the pump completes its stroke, the pilot shaft (1) is again mechanically shifted causing the process to repeat on the opposite side. Features and Benefits of the U2 Air Valve Pilot Shaft On/Off Reliability: Consistent pump start up is ensured by positive modulating air pressure directed from the pilot shaft to the valve spool. Instant Exhaust Valves 7 C C B 6 Superior Flow Rates: Volumetric efficiency is created by instantly exhausting the air chamber pressure from behind the diaphragms directly to the atmosphere. This allows the diaphragms to displace more fluid per stroke, delivering increased flow rates efficiently. Increased Air Efficiency: SCFM usage is decreased by reducing internal valve system losses, further improving volumetric efficiencies. Reduced Air Valve Contamination: The exhaust valves are used to evacuate air chamber pressure, which reduces air valve contamination from occurring due to a diaphragm rupture. Enhanced Transfer Efficiency: Quick pump change-over creates less pulsation, while maintaining consistent fluid pressure, ensuring uninterrupted flow. Air Exhaust 3
Ultra-Matic 2" Bolted Plastic Pumps Side Porting Standard, Center Porting Optional Specifications English Metric Flow rate adjustable to -192 gpm -727 lpm Port size Inlet and Outlet 2" ANSI/DIN # Flange Air inlet." NPTF Air exhaust.7" NPTF Suction lift* (dry) Rubber 2' 6.1 m PTFE 1' 3. m Max. particle size Diameter.2" 6 mm Shipping weight Poly, End Port 67 lbs 3 kg Poly, Center Port 72 lbs 33 kg PVDF, End Port 93 lbs 42 kg PVDF, Center Port 98 lbs 44 kg 8 7 7 6 6 4 4 3 3 2 2 1 1 Meters 26 24 22 2 18 16 14 12 1 8 6 4 2 Feet Discharge Head in PSI 12 1 8 6 4 2 2 4 6 8 Performance Displacement Per Stroke,. Gal. (1.9L) 1 12 14 16 AIR CONSUMPTION IN SCFM AIR PRESSURE IN PSI SCFM M 3 /HR 2 34 4 68 6 12 8 136 1 17 12 24 14 238 16 272 2 4 6 8 1 12 14 16 18 2 Capacity in U.S. Gallons Per Minute One-piece molded nonmetallic center section Available with side or centermounted ports Available with adjustable center porting and dimensionally interchangeable with Wilden Original Series nonmetallic units * For U2 pumps fitted with PTFE diaphragms, reduce water discharge figures by 2%. Suction lift is reduced to 1' (3. m) dry and 2' (6.1 m) wet. 24.2 616 27.2 692 3. 76 1 2 3 4 6 7 Capacity in Liters Per Minute 19.7 2 Dimensions 3.2 768 Ø12. 3 19.88 12.81 32 1.6 383 Ø.6 14 1. 24 9. 229 12.6 319 Inches [mm] FRONT VIEW SIDE VIEW BOTTOM VIEW U2 Plastic Pumps Consult factory for certified drawings 4
Ultra-Matic 2" Bolted Metallic Pumps Vertical Porting Standard, Horizontal Porting Optional U2 English Metric Flow rate adjustable to -17 gpm -644 lpm Port size Inlet and Outlet 2" ANSI/DIN # Flange Air inlet." NPTF Air exhaust.7" NPTF Suction lift* (dry) Rubber 2' 6.1 m PTFE 1' 3. m Max. particle size Diameter.2" 6 mm Shipping weight Cast Iron 11 lbs 2 kg Hastelloy C 123 lbs 6 kg Stainless Steel 11 lbs 2 kg One-piece molded nonmetallic center section Includes both ANSI and DIN flange connections Available with vertical or horizontal discharge Specifications 8 7 7 6 6 4 4 3 3 2 2 1 1 Meters 24.31 648 26 24 22 2 18 16 14 12 1 8 6 4 2 Feet Discharge Head in PSI 12 1 8 6 4 2 2 4 6 8 27.7 7 Performance Displacement Per Stroke,.4 Gal. (1.7L) 1 14 16 12 Ø12. 3 AIR CONSUMPTION IN SCFM AIR PRESSURE IN PSI SCFM M 3 /HR 2 34 4 68 6 12 8 136 1 17 12 24 14 238 16 272 2 4 6 8 1 12 14 16 18 2 Capacity in U.S. Gallons Per Minute 1 2 3 4 6 7 Capacity in Liters Per Minute * For U2 pumps fitted with PTFE diaphragms, reduce water discharge figures by 2%. Suction lift is reduced to 1' (3. m) dry and 2' (6.1 m) wet. Dimensions 17.69 449 13. 343 11. 292 11. 279 18.31 46 1. 24 Ø.6 14 3.38 86 3.13 79 12.6 36 Inches [mm] FRONT VIEW SIDE VIEW BOTTOM VIEW U2 Bolted Metallic Pumps Consult factory for certified drawings
Ultra-Matic 2" Clamped Metallic Pumps Specifications English Metric Flow rate adjustable to -182 gpm -689 lpm Port size Inlet and Outlet 2" Female NPT (BSP) Air inlet." Female NPT Air exhaust.7" Female NPT Suction lift* (dry) Rubber 2' 6.1 m PTFE 1' 3. m Max. particle size Diameter.2" 6 mm Shipping weight Aluminum 69 lbs 31 kg Cast Iron 114 lbs 2 kg Hastelloy 124 lbs 6 kg Stainless Steel 114 lbs 2 kg 8 7 7 6 6 4 4 3 3 2 2 1 1 Meters 26 24 22 2 18 16 14 12 1 8 6 4 2 Feet Discharge Head in PSI 12 1 8 6 4 2 2 4 8 6 Performance Displacement Per Stroke,.49 Gal. (1.8L) 12 1 16 14 AIR CONSUMPTION IN SCFM AIR PRESSURE IN PSI SCFM M 3 /HR 2 34 4 68 6 12 8 136 1 17 12 24 14 238 16 272 2 4 6 8 1 12 14 16 18 2 Capacity in U.S. Gallons Per Minute Three-piece center section with nonmetallic center and metallic air chambers Clamped design provides quick teardown for repairs Pumps and center sections are dimensionally interchangeable with Wilden 2 Original series clamp style pumps 23. 84 1 2 3 4 6 7 Capacity in Liters Per Minute * For U2 pumps fitted with PTFE diaphragms, reduce water discharge figures by 2%. Suction lift is reduced to 1' (3. m) dry and 2' (6.1 m) wet. 2. 1 18.63 473 2.6 637 Dimensions Ø12.6 36 FRONT VIEW SIDE VIEW BOTTOM VIEW 26. 673 Ø. 13 16.2 413 1.13 27 Inches [mm] 12.44 316 9. 229 1. 24 13.6 344 U2 Clamped Pumps Consult factory for certified drawings 6
Ultra-Matic 2" Bolted Aluminum Pump U2 English Metric Flow rate adjustable to -17 gpm -662 lpm Port size Inlet and Outlet 2" Female NPT (BSP) Air inlet." NPTF Air exhaust.7" NPTF Suction lift* (dry) Rubber 2' 6.1 m PTFE 1' 3. m Max. particle size Diameter.43" 11 mm Shipping weight Aluminum 7 lbs 34 kg Leak-free bolted design for a greater positive seal Cast-in boss allows for installation of drain plugs The most solid feet in the industry for improved durability Specifications 8 7 7 6 6 4 4 3 3 2 2 1 1 Meters 26 24 22 2 18 16 14 12 1 8 6 4 2 Feet Discharge Head in PSI 12 1 8 6 4 2 2 4 24.88 632 8 6 Performance Displacement Per Stroke,.47 Gal. (1.78L) 12 14 1 16 Ø13.13 333 AIR CONSUMPTION IN SCFM AIR PRESSURE IN PSI SCFM M 3 /HR 2 34 4 68 6 12 8 136 1 17 12 24 14 238 16 272 2 4 6 8 1 12 14 16 18 2 Capacity in U.S. Gallons Per Minute 1 2 3 4 6 7 Capacity in Liters Per Minute * For U2 pumps fitted with PTFE diaphragms, reduce water discharge figures by 2%. Suction lift is reduced to 1' (3. m) dry and 2' (6.1 m) wet. Dimensions 17.69 449 1.44 26 13.81 31 22.38 68 1. 267 19.31 491 9. 229 26.44 672 Ø. 13 2. 64 Inches [mm] FRONT VIEW SIDE VIEW BOTTOM VIEW U2 Bolted Aluminum Pump Consult factory for certified drawings 7
Ultra-Matic 2" Food Processing Pump Specifications English Metric Flow rate adjustable to -182 gpm -689 lpm Port size Inlet and Outlet 2." Tri-Clamp Air inlet." Female NPT Air exhaust.7" Female NPT Suction lift* (dry) Rubber 2' 6.1 Teflon 1' 3. m Max. particle size Diameter.44" 11 mm Shipping weight Stainless Steel 117 lbs 3 kg Electro- Polished wetted components (internally and externally) Clamp bands and wing nuts for quick teardown and sanitizing Tri-Clamp connections for quick disassembly 8 7 7 6 6 4 4 3 3 2 2 1 1 Meters Performance * For U2 pumps fitted with PTFE diaphragms, reduce water discharge figures by 2%. Suction lift is reduced to 1' (3. m) dry and 2' (6.1 m) wet. 23. 84 26 24 22 2 18 16 14 12 1 8 6 4 2 Feet Discharge Head in PSI 12 1 8 6 4 2 2 4 18.37 467 24.7 629 8 6 Displacement Per Stroke,.49 Gal. (1.8L) 12 1 26.2 667 Dimensions Ø11.98 33 16 14 AIR CONSUMPTION IN SCFM AIR PRESSURE IN PSI Ø.6 14 SCFM M 3 /HR 2 34 4 68 6 12 8 136 1 17 12 24 14 238 16 272 2 4 6 8 1 12 14 16 18 2 Capacity in U.S. Gallons Per Minute 1 2 3 4 6 7 Capacity in Liters Per Minute 12.2 311 1. 24 17.31 44 9. 229 1. 24 13.63 346 11.69 297 Inches [mm] FRONT VIEW SIDE VIEW BOTTOM VIEW U2 Clamped Pumps Consult factory for certified drawings 8
Ultra-Matic 2" Flap Valve Pump U2 Specifications English Metric Flow rate adjustable to -21 gpm -79 lpm Port size Inlet and Outlet 2" Female NPT (BSP) Air inlet." Female NPT Air exhaust.7" Female NPT Suction lift* (dry) Rubber 2' 6.1 m PTFE 1' 3. m Max. particle size Diameter 1.12" 29 mm Shipping weight Aluminum 77 lbs 3 kg Three-piece center section with nonmetallic center and metallic air chamber options Clamp bands for quick disassembly Flap valves for the pumping of solids 8 7 7 6 6 4 4 3 3 2 2 1 1 Meters 26 24 22 2 18 16 14 12 1 8 6 4 2 Feet Discharge Head in PSI 12 1 8 6 4 2 2 4 Inlet 2" Female NPT (BSP) 6 8 2. 648 Performance Displacement Per Stroke,.61 Gal. (2.3L) * For U2 pumps fitted with PTFE diaphragms, reduce water discharge figures by 2%. Suction lift is reduced to 1' (3. m) dry and 2' (6.1 m) wet. Dimensions Ø12.6 36 1 14 12 AIR CONSUMPTION IN SCFM AIR PRESSURE IN PSI 11.88 32 SCFM M 3 /HR 2 34 4 68 6 12 8 136 1 17 12 24 14 238 2 4 6 8 1 12 14 16 18 2 Capacity in U.S. Gallons Per Minute 1 2 3 4 6 7 Capacity in Liters Per Minute 1.38 264 17.38 441 9. 229 1. 24 13.6 344 23.69 62 2.69 2 28. 724.Ø44 11 Discharge 2" Female NPT (BSP) 11.31 287 Inches [mm] FRONT VIEW SIDE VIEW BOTTOM VIEW U2 Clamped Pumps Consult factory for certified drawings 9
Ultra-Matic Center Sections Cost-effective Upgrades for Your Pumps Bolt it, clamp it, revamp it. Interchangeable center sections for improved performance and efficiency. The simple to install Ultra-Matic center section provides a low cost upgrade solution that fits your existing Versa-Matic or Wilden Original Series 2" pumps. Improved efficiency, flow rates, and service life at a fraction of the cost of a new pump unit. The U2 series is available in a variety of chemically resistant materials and coatings to handle even the most difficult of applications. Center Section Kits For 2 Versa-Matic Bolted Pumps (SS/CI/H) Center Section Kits For 2 Versa-Matic Bolted Pumps (AL) Wilden Clamp-style pumps retrofitted with U2 center sections. Complete conversion kits are available with a variety of diaphragm and plate options. 3-piece center air chambers are available in a variety of materials and coatings. Upgrade kits come complete with a new stainless steel main shaft. Center Section Kits that fit 2" Versa-Matic or Wilden Clamped Pumps 1
Value-added Accessories and Diaphragms Getting the Most Out of Your Pumps U2 Versa-Matic s product line includes a variety of pump accessories to enhance your pump performance: Surge Suppressors Our surge suppressors provide virtually pulse-free discharge flow, for steadier pressure and less system vibration and noise. Self-charging and self-venting. Pail and Drum Transfer Kits These adapter kits easily connect 1/2" metal or nonmetallic pumps to a -gallon bucket, 12 lb. barrel or -gallon drum for a cleaner application. Versa-Sense II Leak Detector The Versa-Sense II protects product from contamination in the event of a diaphragm failure. The control unit can easily be wired to an audible alarm or pump shutdown device. Level Controllers These units port air through a special regulator to start or stop AODD pumps. Manufactured with corrosionresistant wetted components and featuring explosionproof construction, they require no electrical connections and are adjustable from a few inches to approximately nine feet. Ideal for sump and fluid transfer applications. Anti-Shock Valves Protect your pumps, pipes and diaphragms from damage during start-ups. Our Smart Start Anti-shock valves enable compressed air to gradually increase to the desired pressure over a time period of up to 3 seconds. Flange Adapter Kits Our Flange Adapter Kits allow you to quickly, easily and economically convert your flange pumps to female-threaded pumps. The kits are available in three sizes for use with 1", 1-1/2" and 2" non-metallic polypropylene pumps. Filter/Regulator/Lubricators FRLs improve pump performance and reduce maintenance costs. Used to filter particles and water out of the compressed air coming into the pump, as well as control the air pressure. Also controls lubrication amounts to optimize pump performance. Versa-Matic offers the most extensive line of diaphragms in the industry, including: FDA Hytrel Thermoplastic Diaphragms Approved for use with food and dairy mediums, FDA Hytrel diaphragms are also excellent for abrasive product transfer. Versa-Dome Diaphragms An industry first, Versa-Dome s simple, smooth dome shape delivers flex across the entire face of the diaphragm to provide three times the life of standard diaphragms. They are interchangeable with most Wilden 2" & 3" pump models. Versa-Rugged VR Diaphragms Our standard rubber diaphragms are reinforced with high-quality fabric and designed to reduce maintenance and repair costs. They are interchangeable with most Wilden pump models. TPE-XL Thermoplastic Diaphragms Versa-Matic s innovative thermoplastic diaphragms have much of the chemical resistance of PTFE but cost significantly less. They are extremely resistant to abrasion and are interchangeable with most Wilden pump models. FUSION Integrated-Plate Bonded PTFE Diaphragms FUSION diaphragms enhance flow rates, displacement per cycle and suction lift. Backing ribs allow for extended life and deflection ridges eliminate radial cracking and potential leak paths. 11
Hytrel is a registered trademarks of DuPont. Kynar is a registered trademark of Penwalt Corp. Wilden is a registered trade name of Wilden Pump and Engineering Company, a Dover Resources Company. Elima-Matic, Fusion, Versa-Dome, Versa-Matic, Versa-Sense, Versa-Tuff and Versa-Rugged VR are registered tradenames and trademarks of IDEX Corporation. Ultra-Matic U.S. Patent No. 6,962,487. VERSA-MATIC IDEX AODD, Inc. A Unit of IDEX Corporation 8 North Main Street, P.O. Box 168 Mansfield, OH 4491-168 Phone: (419) 26-7296 Fax: (419) 26-7289 www.versamatic.com 29 IDEX Corporation VMU2-19