LITHIUM-ION BATTERY POWERED CRIMP TOOLS COMPLETELY PORTABLE POWER CRIMPING
INTRODUCTION TO SOLUTIONS TE Connectivity. A Leader in Crimp Quality. Anyone can make a tool to crimp terminals onto a wire. But not everyone can manufacture a tool to crimp the terminals properly. Crimp termination of wires isn t easy. At least, doing it right isn t easy. We know. We started it. TE Connectivity developed the technology of hand crimping over 70 years ago. The Secret to a Successful Crimp. Matching the Terminal to the Tooling - Among the many factors that are critical in producing a quality crimp, matching the terminal to the tooling is crucial. Unlike inferior tooling options, TE offers engineered solutions that are designed to match the exact crimp geometry of the terminal to be applied on the wire. To create a proper crimp you need to follow these important steps: 1. Wire Selection - AWG and wire insulation thickness varies from wire to wire. Just because two wires are listed at the same AWG, it doesn t mean their insulation thickness is the same. If you don t take into account both factors, the copper or aluminum strands may not fit in the wire barrel correctly or the terminal s insulation support may be too large or small for the wire strand. 2. Wire Prep - In order to properly place a wire in a terminal, the wire insulation must first be stripped to the proper length based on the terminal specifications. If the insulation is cut too short or too long, the wire will not be seated properly into the wire barrel, causing terminal separations or shorting. 3. Crimp Specifications - To create a proper crimp for a TE connector or terminal you should use a TE tooling solution that is specifically engineered to the proper crimp height, width and crimp geometry of the selected terminal or contact. PAGE 2
Standard Die Envelope (SDE) - Technology INTRODUCTION TO SOLUTIONS FAST FACTS Dies meet wire crimp requirements per specification Over 100 interchangeable SDE die sets for crimping over 4,000 different connectors Ability to handle multiple wire and terminal sizes in one die set Standard Die Envelope (SDE) technology is a new, flexible approach to crimp tooling, that allows use of the same dies on tooling across a range of application platforms. Dies are interchangeable in tools from portable hand tools manual or battery-powered to pneumatic hand tools and electric bench terminators. It s a family of tools that you can take from bench to production or into the field, without the need for dies fitted to each kind of tool. They re suited for R & D, networking applications and on-site maintenance work. Customers can be sure their dies will fit their long-term needs, because they are completely compatible with all tools in the SDE system. They move with a customer as their needs grow. By removing just 2 screws you can easily swap dies between your SDE compatible manual, battery, pneumatic and electric TE tools. PAGE 3
POWER HAND Standard Micro Crimp Hand Tool Kit, 10.8V, 3,400 lb FAST FACTS Light weight, ergonomic design is only 2.2 lbs Uses 90% less force, thereby reducing operator muscle fatigue Contains a built in LED light for illuminating crimping point and work area Contains mounting lugs for use with a balancer or as fall protection when used outdoors 10.8V Lithium-Ion battery USB adapter to download crimp cycle information to a computer Higher crimp force capability than comparable tools Maximum Power. Minimum Effort. The SDE Micro Crimp hand tool provides maximum crimping results for minimum effort with its one-lever operation for controlling all tool functions. Unlike other 2-handed manual crimping tools, the intuitive Quick Takeup technology built into the SDE Micro Crimp hand tool allows the operator to keep one hand free to place the wire while crimping with the other hand. Compared to a manual hand tool the SDE Micro Crimp hand tool: Utilizes an electronic control with lock function to monitor complete closing of the dies Automatically retracts when the crimping is complete Features motor stall protection in case of faulty operation PAGE 4
Standard Micro Crimp Hand Tool Kit, 10.8V, 3,400 lb POWER HAND Built-in LED Lights Monitor Battery Life and Tool Status Lithium Battery for Hours of Operation Easy One Lever Operation Built in LED for Illuminating Crimp Point Lightweight Just 2.2 lbs Easily Interchangeable Crimp Dies for Thousands of Crimping Options Mounting Lug for Full Protection Strong Crimp Force Requires 90% Less Hand Force to Complete a Crimp SDE Micro Crimping Tool (w/battery installed) P/N 2280380-[ ] Length 253mm [9.96 ] Width 93mm [3.66 ] Depth 64mm [2.52 ] P/N Description Weight (w/battery) 0.96kg [2.12 lb] 2280380-1* SDE Micro Tool Kit, 110-120 Volt Charger, Battery Sound Level 70 dba at 1 meter 2280380-2* SDE Micro Tool Kit, 220-240 Volt Charger, Battery 2280381-1* SDE Micro Tool Battery, 10.8 Volts 2280382-1* SDE Micro Tool Charger, 110-120 Volts 2280382-2* SDE Micro Tool Charger, 220-240 Volts Vibration < 2.5 m/s 2 Crimping Capacities Max. Crimping Force 15 kn (1.53 metric tons) [3,400 lbs] max.] 2217896-1* SDE Micro USB Adapter Module Avg. Crimping Force 2 sec. * CE Certified Avg. Crimps Per Charge Approx. 350 PAGE 5
POWER HAND Lithium-Ion Battery-Powered Crimp Tool Kits, 18V, 3,500 lb Fast Facts Fast, ergonomically-designed tools suitable for use at the bench, on the line, or in the field. Maximum wire size depending on terminal type: 10 AWG (3,500 lb tool) Completely portable Over 150 crimps per charge (3,500 lb tool) Pressure-sensitive cycle control On-board pressure monitoring with visual (LED) and audible warnings of an incomplete crimp Crimp cycle information can be downloaded to a computer via optional USB adapter Lightweight and compact Kits include tool, 2 batteries, charger, case Lithium-Ion batteries - no memory effects 20 minute charging time 3500 lb Crimping Tool (w/battery installed, w/o head) Length 254mm [10.00 ] Width 73mm [2.87 ] Depth 114mm [4.50 ] Mass Weight (w/battery) Sound Level 1.3kg [2.9 lb] 75 dba at 1 meter Vibration < 2.5 m/s 2 Hydraulic Oil Shell Tellus T15 3500 lb Crimping Capacities Maximum Crimping Force 15.6 kn [1.75 ton] Average Crimping Force 2 sec Average Crimps Per Charge Approx. 150 Each battery tool kit includes a tool, 2 batteries and a charger in a rugged carrying case. PAGE 6
POWER HAND Lithium-Ion Battery-Powered Crimp Tool Kits, 18V, 3,500 lb Tooling Options SDE Open Head Battery Powered Crimp Tool Kit PN 2217480-1, 110 volts PN 2217480-2, 220 volts This battery powered crimp tool kit accepts TE s SDE shoulder mounted die sets like the one shown. For a partial list of SDE die sets, please refer to catalog 1773379-1. Customer Manual 409-32031 SDE Closed Head Battery Powered Crimp Tool Kit PN 2217481-1, 110 volts PN 2217481-2, 220 volts This battery powered crimp tool kit accepts TE s SDE shoulder and pin mounted die sets like the ones shown. This tool kit can not be used to crimp butt splices. For a partial list of SDE die sets, please refer to catalog 1773379-1. Customer Manual 409-32032 CERTI-CRIMP II, Battery Powered Crimp Tool Kit PN 2217482-1, 110 volts PN 2217482-2, 220 volts This battery powered crimp tool kit accepts heads from TE s CERTI-CRIMP II straight action hand tools like the one shown. For a partial list of CERTI-CRIMP II straight action hand tools, please refer to catalog 65780.Customer Manual 409-32033 Double Action Battery Powered Crimp Tool Kit PN 2217483-1, 110 volts PN 2217483-2, 220 volts This battery powered crimp tool kit accepts heads from TE s double action hand tools like the one shown. For a partial list of double action hand tools, please refer to catalog 65780. Customer Manual 409-32028 Heavy-Head Battery Powered Crimp Tool Kit PN 2217484-1, 110 volts PN 2217484-2, 220 volts This battery powered crimp tool kit accepts TE s SDE shoulder mounted die sets like the one shown. For a partial list of SDE die sets, please refer to catalog 1773379-1. Customer Manual 409-32029 T-Head Battery Powered Crimp Tool Kit* PN 2217485-1, 110 volts PN 2217485-2, 220 volts This battery powered crimp tool kit can be used to crimp 22-16 and 16-14 AWG PIDG terminals and splices. The kit can also crimp 22-16 and 16-14 AWG PLASTI-GRIP terminals. *Crimp head is included. Customer Manual 409-32030 PAGE 7
POWER HAND Lithium-Ion Battery-Powered Crimp Tool Kits, 18V, 8,000 lb, 12,000 lb, 24,000 lb Fast Facts Fast, ergonomically-designed tools suitable for use at the bench, on the line, or in the field. Pressure-sensitive cycle control On-board pressure monitoring with visual (LED) and audible warnings of an incomplete crimp Crimp cycle information can be downloaded to a computer via optional USB adapter Kits include tool, 2 batteries, charger, case Lithium-Ion batteries - no memory effects 20 minute charging time 8,000 lb Crimping Tool (with Battery Installed) P/N 2217330-[ ] 12,000 lb Inline Crimping Tool (with Battery Installed) P/N 2280116-[ ] 12,000 lb Pistol Grip Crimping Tool (with Battery Installed) P/N 2161171-[ ] 24,000 lb Pistol Grip Crimping Tool (with Battery Installed) P/N 2280308-[ ] Length 337mm [13.25] Width 73mm [2.87] Depth 114mm [4.5] Weight (w/battery) 1.8kg [4.0 lb] Sound Level 75 dba at 1 meter Vibration < 2.5 m/s2 Hydraulic Oil Shell Tellus T15 Length 413mm [16.26] Width 75mm [2.95] Depth 116mm [4.56] Weight (w/battery) 3.08kg [6.8 lb] Sound Level 75 dba at 1 meter Vibration Hydraulic Oil < 2.5 m/s2 Shell Tellus T15s or RIVOLTA S.B.H. 11 Length 327mm [12.9] Width 75mm [2.95] Depth 325mm [12.8] Weight (w/battery) 4.2kg [9.6 lb] Sound Level 75 dba at 1 meter Vibration Hydraulic Oil < 2.5 m/s2 Shell Tellus T15s or RIVOLTA S.B.H. 11 Length 412mm [16.2] Width 75mm [2.95] Depth 319mm [12.6] Weight (w/battery) 6.8kg [15.0 lb] Sound Level 75 dba at 1 meter Vibration Hydraulic Oil < 2.5 m/s2 Shell Tellus T15s or RIVOLTA S.B.H. 11 Crimping Capacities Crimping Capacities Crimping Capacities Crimping Capacities Max. Crimping Force 35 kn [4 ton] Avg. Crimping Time 4 sec Avg. Crimps/Charge Approx. 85 Max. Crimping Force 60 kn (6 metric ton) [13,500 lb] Avg. Crimping Time 2-5 sec Avg. Crimps/Charge Approx. 100-300 Max. Crimping Force 60 kn (6 metric ton) [13,500 lb] Avg. Crimping Time 3-6 sec Avg. Crimps/Charge Approx. 100-300 Max. Crimping Force 106.6 kn [12 ton] Avg. Crimping Time 10-15 sec Avg. Crimps/Charge Approx. 110 PAGE 8
Lithium-Ion Battery-Powered Crimp Tool Kits, 18V, 8,000 lb, 12,000 lb, 24,000 lb Tooling Options POWER HAND 8,000 lb Latch Head Battery Powered Crimp Tool Kit PN 2217330-1, 110 volts PN 2217330-2, 220 volts This battery powered crimp tool kit can be used to crimp the following terminals and splices: 8 to 6 AWG TERMINYL and PLASTI-GRIP See instruction sheet 408-10051 for a list of available die sets 8-4 AWG SOLISTRAND See instruction sheet 408-10050 for a list of available die sets 12-10 AWG STRATO-THERM See instruction sheet 408-10228 for a list of available die sets Customer Manual 409-32026 12,000 lb Inline & Pistol Grip Battery Powered Crimp Tool Kits PN 2280116-1, 110 volts (Inline), PN 2280116-2, 220 volts (Inline) PN 2161171-1, 110 volts (Pistol Grip) PN 2161171-2 220 volts (Pistol Grip) These battery powered crimp tool kits can be used to crimp the following terminals and splices: SOLISTRAND 8, 6, 4, 2 AWG only See instruction sheet 408-8691 STRATO-THERM 8, 6, 4 only per TE Instruction Sheet 408-8691 (Ring Tongue Terminals, Butt Splices, and Parallel Splice) Customer Manual 409-32039 24,000 lb Pistol Grip Battery Powered Crimp Tool Kit PN 2280308-1, 110 volts PN 2280308-2, 220 volts These battery powered crimp tool kits can be used to crimp the following terminals and splices: SOLISTRAND 8, 6, 4, 2, 1/0, 2/0, 3/0 and 4/0 AWG only. See instruction sheet 408-8691 STRATO-THERM 8, 6, 4, 2 and 1/0 only per TE Instruction Sheet 408-8691 (Ring Tongue Terminals, Butt Splices, and Parallel Splice) Customer Manual 409-32039 PAGE 9
POWER HAND Tooling-to-Terminal Cross Reference LITHIUM-ION BATTERY POWERED TOOLS UNINSULATED TERMINALS 3,400 lb 3,500 lb 8,000 lb 12,000 lb 24,000 lb SOLISTRAND Terminals and Splices INSULATED TERMINALS PIDG FASTON Receptacles (6409oo Series) PIDG Terminals and Splices, PLASTI-GRIP Terminals Max. Insul. Dia. Battery Tools Powered 22-16 0.3-1.25 16-14 1.25-2 12-10 3-5 8 7 Wire Range AWG mm2 Max. Insul. Dia. Battery Tools Powered 22-18 0.3-0.8.100 2.54 16-14 1.25-2.170 4.32 12-10 3-5.250 6.35 26-22 0.12-0.3.082 2.08 22-16 0.3-1.25.125 3.18 16-14 1.25-2.150 3.81 12-10 3-5.230 5.84 26-22 0.12-0.3.080 2.03 PLASTI-GRIP Butt Splices 22-16 0.3-1.25.170 4.32 16-14 1.25-2.215 5.46 PLASTI-GRIP Terminals 8 7.377 9.58 FULLY-INSULATED TERMINALS PAGE 10 Wire Range AWG mm2 AWG Wire Range mm2 Ultra-Fast Plus FASTON Receptacles 22-18 0.3-0.8 16-14 Ultra-Fast FASTON Tabs and Receptacles 22-18 16-14 1.25-2 Max. Insul. Dia. Battery Tools Powered.135 3.43 1.25-2.160 4.06 0.3-0.8.230 5.84.260 6.60
POWER HAND Tooling-to-Terminal Cross Reference OPEN BARREL TERMINALS Style Wire Range Max Battery Tools AWG mm 2 Insul. Dia. Powered AMPLIMITE Size 20 DF Contacts 28-24 0.08-0.2.040 1.02 D-Sub. Connectors 24-20 0.2-0.5.060 1.52 Size 22 DF Contacts 28-22 0.08-0.3.040 1.02 Mod. IV Contacts 26-22 0.12-0.3.061 1.55 24-20 0.2-0.5.069 1.75 Locking Clip Contacts 26-22 0.12-0.3.062 1.58 AMPMODU MTE & Tandem Spring 32-28 0.03-0.08.054 1.37 Connectors Contacts 26-22 0.12-0.3.065 1.65 Short Point Contacts Type II Contacts 32-22 0.03-0.3.060 1.52 24-20 0.2-0.5.060 1.52 28-24 0.08-0.2.055 1.40 24-20 0.2-0.6.062 1.57 18-16 0.8-1.4 14 2 30-26 0.05-0.15.060 1.52 26-24 0.12-0.2.055 1.40 CPC Connectors, 24-20 0.2-0.6.080 2.03 M Series Connectors Type III+ Contacts 24-20 0.2-0.6.100 2.54 24-20 0.2-0.6.120 3.05 18-16 0.8-1.25.100 2.54 18-14 0.8-2.100 2.54 16 1.25.160 4.06 Type II Contacts 14-12 2-3.160 4.06 10-8 5-7.220 5.59 FASTON 22-18 0.3-0.8.130 3.30 Straight Receptacles 250 Series 18-14 0.8-2.170 4.32 (Premier Line Only) 14-10 2-5.200 5.08 30-22 0.05-0.3.075 1.91 Commercial Contacts 24-18 0.2-0.8.100 2.54 20-14 0.5-2.130 3.30 24-18 0.2-0.8.100 2.54 MATE-N-LOK Universal & 20-14 0.5-2.130 3.30 Connectors Universal II Contacts 20-18 0.5-0.8.200 5.08 16-14 1.25-2.200 5.08 Mini-Universal 20-16 0.5-1.25.126 3.20 Mini-Universal II 26-22 0.12-0.3.069 1.75 Contacts 22-18 0.3-0.8.094 2.39 20-16 0.5-1.25.126 3.20 22-20 0.3-0.6.106 2.70 Power Triple Lock Power Triple 20-16 0.6-1.25.130 3.30 Connectors Lock 18-14 0.9-2.1.146 3.70 12 3.3.167 4.25 PAGE 11
Let s Connect To learn more about the right TE tooling for your needs, call us at 717-810-2082 or email ToolingSales@te.com TE Technical Support Center USA: 1.800.522.6752 Canada: 1.800.522.6752 Mexico: +52.55.1106.0800 Latin/S. America +54.11.4733.2200 Germany: +49.6151.607.1999 UK: +44.0800.267666 France: +33.1.34.20.8686 Netherlands: +31.73.624.6999 China: +86.400.820.6015 Use SDE to Step Up Production If your production needs require faster output consider maximizing the power of the SDE die sets found in your Lithium-Ion powered battery hand tools. With an SDE benchtop unit you can quickly transfer the SDE die sets you are already using into our SDE electric bench terminator or our AT-SC MK II pneumatic safety crimping machine, thereby speeding up your production capacity whenever you need it. For purchasing or leasing options go to Tooling.te.com and search for part number 1490076-2 and 1-528050-0. Waste Not. Want Not. Whether it s time or scrap, in manufacturing everyone knows that waste costs money. With our on-site certification and consultation services, we can help you: Reduce downtime Reduce scrap Maintain crimp quality Improve manufacturing efficiency Connect with us today to learn more. E-mail: fieldservicesnorthamerica@te.com Phone: 800-722-1111 or 717-986-3434 For additional information download catalog #1-1307619-0 from Tooling.te.com. tooling.te.com 1-1773859-6/ 06-17 2017 TE Connectivity Ltd. family of companies. All Rights Reserved. AMPLIMITE, AMPMODU, CERTI-CRIMP, FASTON, MATE-N-LOK, PLASTI-GRIP, Power Triple Lock, SOLISTRAND, TE Connectivity and TE Connectivity (logo) are trademarks. Other product and/or crimping names herein might be trademarks of their respective owners. For more information call: 888-777-5917 or 717-810-2080 In the interest of continuous improvement, TE reserves the right to modify, discontinue or replace any products.