Parts Manual Contains: - PDF Free Download

Parts Manual Contains: M-0- REV. B JANUARY 009 Warranty Information Warnings Parts Ordering Information Exploded View Parts Breakdowns MAXON Lift Corp. 009

LIFT CORP. 9 Slauson Ave. Santa Fe Springs, CA. 9070 CUSTOMER SERVICE: TELEPHONE () -0099 TOLL FREE (800) 7- FAX: (888) 77-77 NOTE: For latest version of all Manuals (and replacements), download the Manuals from Maxon s website at www.maxonlift.com. WARRANTY/ RMA POLICY & PROCEDURE LIFTGATE WARRANTY Type of Warranty: Term of Warranty: Full Parts and Labor Standard Liftgates - years from ship date or,000 cycles Premium Liftgates - years from ship date or 0,000 cycles This warranty shall not apply unless the product is installed, operated and maintained in accordance with MAXON Lift s specifi cations as set forth in MAXON Lift s Installation, Operation and Maintenance manuals. This warranty does not cover normal wear, maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, or carelessness of operation. In addition, this warranty does not cover equipment that has had unauthorized modifi cations or alterations made to the product. MAXON agrees to replace any components which are found to be defective during the fi rst years of service, and will reimburse for labor based on MAXON s Liftgate Warranty Flat Rate Schedule. (Copy of the Flat Rate is available at www.maxonlift.com.) All warranty repairs must be performed by an authorized MAXON warranty facility. For any repairs that may exceed $00, including parts and labor, MAXON s Technical Service Department must be notifi ed and an Authorization Number obtained. All claims for warranty must be received within 0 Days of the repair date, and include the following information:. Liftgate Model Number and Serial Number. The End User must be referenced on the claim. Detailed Description of Problem. Corrective Action Taken, and Date of Repair. Parts used for Repair, Including MAXON Part Number(s). MAXON R.M.A. # and/or Authorization # if applicable (see below) 7. Person contacted at MAXON if applicable 8. Claim must show detailed information i.e. Labor rate and hours of work performed Warranty claims can also be placed online at www.maxonlift.com. Online claims will be given priority processing. All claims for warranty will be denied if paperwork has not been received or claim submitted via Maxon website for processing by MAXON s Warranty Department within 0 days of repair date. All components may be subject to return for inspection, prior to the claim being processed. MAXON products may not be returned without prior written approval from MAXON s Technical Service Department. Returns must be accompanied by a copy of the original invoice or reference with original invoice number and are subject to a credit deduction to cover handling charges and any necessary reconditioning costs. Unauthorized returns will be refused and will become the responsibility of the returnee. Any goods being returned to MAXON Lift must be pre-approved for return, and have the R.M.A. number written on the outside of the package in plain view, and returned freight prepaid. All returns are subject to a % handling charge if not accompanied by a detailed packing list. Returned parts are subject to no credit and returned back to the customer. Defective parts requested for return must be returned within 0 days of the claim date for consideration to: MAXON Lift Corp. 0 Greenleaf Ave., Santa Fe Springs, CA 9070 Attn: RMA# MAXON s warranty policy does not include the reimbursement for travel time, towing, vehicle rental, service calls, oil, batteries or loss of income due to downtime. Fabrication or use of non Maxon parts, which are available from MAXON, are also not covered. MAXON s Flat Rate Labor Schedule takes into consideration the time required for diagnosis of a problem. All Liftgates returned are subject to inspection and a % restocking fee. Any returned Liftgates or components that have been installed or not returned in new condition will be subject to an additional reworking charge, which will be based upon the labor and material cost required to return the Liftgate or component to new condition. PURCHASE PART WARRANTY Term of Warranty: Year from Date of Purchase. Type of Warranty: Part replacement only. MAXON will guarantee all returned genuine MAXON replacement parts upon receipt and inspection of parts and original invoice. All warranty replacements parts will be sent out via ground freight. If a rush shipment is requested, all freight charges will be billed to the requesting party.

TABLE OF CONTENTS WARNINGS... 7 ORDERING PARTS... 7 BMR-A LIFTGATE SECTION... 9 BMR-A LIFTGATE (WITH TAILLIGHTS & WITHOUT TAILLIGHTS)... 9 MAIN FRAME & ATTACHING HARDWARE (BMR-A) - STEEL PLATFORM... 0 MAIN FRAME & ATTACHING HARDWARE (BMR-A) - ALUMINUM PLATFORM... RH COLUMN ASSEMBLY (WITH TAILLIGHTS)... RH COLUMN ASSEMBLY (WITHOUT TAILLIGHTS)... RH RUNNER ASSEMBLY (BMR-A)... 8 SPRING GUARD MOUNTING... 0 UPPER TANDEM ASSEMBLY, RH RUNNER... TANDEM ASSEMBLY (LOWER)... LH COLUMN ASSEMBLY (WITH TAILLIGHTS)... LH COLUMN ASSEMBLY (WITHOUT TAILLIGHTS)... LH RUNNER ASSEMBLY (BMR-A)... 8 UPPER TANDEM ASSEMBLY, LH RUNNER... 0 PLATFORM, FLIPOVER, AND CHAIN ASSEMBLY (STEEL)... PLATFORM ASSEMBLY (STEEL)... ALUMINUM RETENTION RAMP ASSEMBLY (USE WITH STEEL PLATFORM)... LH CHAIN ASSEMBLY (FOR STEEL PLATFORM)... 8 RH CHAIN ASSEMBLY (FOR STEEL PLATFORM)... 9 PLATFORM, FLIPOVER, AND CHAIN ASSEMBLY (ALUMINUM)... 0 PLATFORM & CHAIN ASSY W/FIXED RAMP (ALUMINUM)... PLATFORM ASSEMBLY (ALUMINUM)... PLATFORM FLIPOVER (ALUMINUM - NO RAMP)...

PLATFORM FLIPOVER W/FIXED RAMP (ALUMINUM)... ALUMINUM RETENTION RAMP ASSEMBLY (USE WITH ALUMINUM PLATFORM)... 8 LH CHAIN ASSEMBLY (FOR ALUMINUM PLATFORM)... 0 RH CHAIN ASSEMBLY (FOR ALUMINUM PLATFORM)... BMR-A-CS & ONE PIECE LIFTGATE SECTION... BMR-A-CS LIFTGATE... BMR-A-ONE PIECE LIFTGATE... MAIN FRAME & ATTACHING HARDWARE (BMR-A-CS & ONE PIECE PLATFORM) - STEEL PLATFORM... MAIN FRAME & ATTACHING HARDWARE (BMR-A-CS & ONE PIECE PLATFORM) - ALUMINUM PLATFORM... RH COLUMN ASSEMBLY (BMR-A-CS & ONE PIECE)... 8 RH RUNNER ASSEMBLY (BMR-A-CS & ONE PIECE)... 0 SPRING GUARD MOUNTING... UPPER TANDEM ASSEMBLY, RH RUNNER... TANDEM ASSEMBLY (LOWER)... LH COLUMN ASSEMBLY (BMR-A-CS & ONE PIECE)... LH RUNNER ASSEMBLY (BMR-A-CS & ONE PIECE)... 8 UPPER TANDEM ASSEMBLY, LH RUNNER... 70 CS PLATFORM ASSEMBLY (STEEL)... 7 ONE PIECE STEEL PLATFORM ASSEMBLY... 7 STEEL PLATFORM AND ALUMINUM RETENTION RAMP ASSEMBLY... 78 ALUMINUM RETENTION RAMP ASSEMBLY (USED WITH STEEL PLATFORM)... 80 ONE PIECE ALUMINUM PLATFORM ASSEMBLY ( DEEP)... 8 ONE PIECE ALUMINUM PLATFORM ASSEMBLY (8 DEEP)... 8

TABLE OF CONTENTS - Continued ALUMINUM RETENTION RAMP ASSEMBLY (USED WITH ALUMINUM PLATFORM)... 8 HYDRAULIC COMPONENTS... 88 DUAL PUMP ASSEMBLY (POWER DOWN)... 88 SINGLE PUMP ASSEMBLY (POWER DOWN)... 9 PUMP/MOTOR (POWER DOWN)... 9 HYDRAULIC COMPONENTS (POWER DOWN)... 9 DUAL PUMP ASSEMBLY (GRAVITY DOWN)... 00 SINGLE PUMP ASSEMBLY (GRAVITY DOWN)... 0 PUMP/MOTOR (GRAVITY DOWN)... 0 DUAL PUMP ASSEMBLY (EQUIPPED WITH STEEL LINES)... 0 SINGLE PUMP ASSEMBLY (EQUIPPED WITH STEEL LINES)...0 PUMP/MOTOR (PUMPS EQUIPPED WITH STEEL LINES)... MANIFOLD ASSEMBLY (PUMPS WITH STEEL LINES, ONLY)... HYDRAULIC COMPONENTS (GRAVITY DOWN)...8 ELECTRICAL COMPONENTS SECTION... ELECTRICAL COMPONENTS - DUAL PUMP BOX... ELECTRICAL COMPONENTS - SINGLE PUMP BOX... ELECTRICAL COMPONENTS - DUAL PUMP BOX (EQUIPPED WITH STEEL LINES)... ELECTRICAL COMPONENTS - SINGLE PUMP BOX (EQUIPPED WITH STEEL LINES)... 7 ELECTRICAL COMPONENTS - BATTERY BOX... 8 BATTERY BOX... 9

Comply with the following WARNINGS while maintaining Liftgates. WARNINGS WARNING Read and understand the instructions in Maintenance Manuals before performing maintenance on the Liftgate. Disconnect Liftgate power cable from battery before repairing or servicing Liftgate. Wear appropriate safety equipment such as protective eyeglasses, faceshield and clothing while performing maintenance on the Liftgate and handling the battery. Debris from drilling and contact with battery acid may injure unprotected eyes and skin. Be careful working by an automotive type battery. Make sure the work area is well ventilated and there are no fl ames or sparks near the battery. Never lay objects on the battery that can short the terminals together. If battery acid gets in your eyes, immediately seek fi rst aid. If acid gets on your skin, immediately wash it off with soap and water. Never perform unauthorized modifi cations on the Liftgate. Modifi cations may result in early failure of the Liftgate and may create hazards for Liftgate operators and maintainers. Use only Maxon Authorized Parts for replacement parts. Order replacement parts from: MAXON LIFT CORP. Customer Service 9 Slauson Ave., Santa Fe Springs, CA 9070 Phone: (800) 7- To order parts by e-mail, submit orders to cservice@maxonlift.com.! Recommended practices for welding on steel parts are contained in the current AWS (American Welding Society) D. Structural Welding Code - Steel. Damage to Liftgate and/or vehicle, and personal injury can result from welds that are done incorrectly. Recommended practices for welding on aluminum parts are contained in the current AWS (American Welding Society) D. Structural Welding Code - Aluminum. Damage to Liftgate and/or vehicle, and personal injury can result from welds that are done incorrectly. ORDERING PARTS Provide Liftgate model and serial number information with your parts order. Need Technical Support? Send requests by e-mail to technicalsupport@maxonlift.com. For latest version Manuals (and replacements), download Manuals from Maxon s website at www.maxonlift.com. 7

THIS PAGE INTENTIONALLY LEFT BLANK 8

BMR-A LIFTGATE SECTION BMR-A LIFTGATE (WITH TAILLIGHTS & WITHOUT TAILLIGHTS) REFER TO PLATFORM, FLIPOVER AND CHAIN ASSEMBLY REFER TO MAIN FRAME & ATTACHING HARDWARE (BMR-A) BATTERY BOX (REFER TO ELECTRICAL COMPONENTS) PUMP BOX (REFER TO HYDRAULIC COMPONENTS) CONTROL SWITCH (REFER TO ELECTRICAL COMPONENTS) 9

MAIN FRAME & ATTACHING HARDWARE (BMR-A) - STEEL PLATFORM REFER TO LH COLUMN ASSEMBLY WITH TAILLIGHTS OR LH COLUMN ASSEMBLY WITHOUT TAILLIGHTS 9 7 REFER TO STEEL PLATFORM ASSEMBLY 8 REFER TO RH COLUMN ASSEMBLY WITH TAILLIGHTS OR RH COLUMN ASSEMBLY WITHOUT TAILLIGHTS 9 0

ITEM QTY. PART NO. DESCRIPTION 90000-0 FLAT WASHER, / 000 LOCK NUT, / - 08 BOLT, / -0 X -/ LG. 90007- SOCKET HEAD CAP SCREW, / - X -/ LG, GRADE 8 90008 NYLON LOCK NUT, / -0 900-9 LOCK WASHER, / 7 800-0 EXTENSION PLATE, 9 UNIT 800-0 EXTENSION PLATE, 0 UNIT 8 9000-0 SOCKET HEAD CAP SCREW, / -0 X LG, GRADE 8 9 800 PIN, LG, STAINLESS STEEL

MAIN FRAME & ATTACHING HARDWARE (BMR-A) - ALUMINUM PLATFORM REFER TO LH COLUMN ASSEMBLY ( PLACES) 9A 7 ( PLACES) ( PLACES) ( PLACES) 9E 9D 9 0 ( PLACES) REFER TO PLATFORM ASSEMBLY 9C 9B ( PLACES) ( PLACES) 9A 8 REFER TO RH COLUMN ASSEMBLY

ITEM QTY. PART NO. DESCRIPTION 90000-0 FLAT WASHER, / 000 LOCK NUT, / - 08 BOLT, / -0 X -/ LG. 9000- HEX HEAD CAP SCREW, / - X -/ LG, GRADE 8 90000- SOCKET HEAD SCREW, FLAT, /8 - X -/ LG. 90007- SOCKET HEAD CAP SCREW, / - X -/ LG, GRADE 8 7 9000 NYLON LOCK NUT, /8-8 90008 NYLON LOCK NUT, / -0 9 8-0 CONNECTOR BAR ASSEMBLY, 9 WIDE 8-0 CONNECTOR BAR ASSEMBLY, 0 WIDE 9A 9000 BEARING, SELF LUBE, -/ I.D. X -/ LG. 9B 9000- HEX HEAD BOLT, /8 - X -/ LG. 9C 90000-0 FLAT WASHER, /8 9D RUBBER BUMPER 9E 9000 NYLON LOCK NUT, /8-0 9000- FLAT WASHER, /8 900-9 LOCK WASHER, / 900- FLAT WASHER, / 800-0 EXTENSION PLATE, 9 UNIT 800-0 EXTENSION PLATE, 0 UNIT 9000-0 SOCKET HEAD CAP SCREW, / -0 X LG, GRADE 8 800 PIN, LG, STAINLESS STEEL

RH COLUMN ASSEMBLY (WITH TAILLIGHTS) NOTE: Most hydraulic components not shown for clarity. Refer to HYDRAULIC COMPONENTS SECTION for hydraulic system parts. REFER TO HYDRAULIC SECTION ( PLACES) ( PLACES) ( PLACES) ( PLACES) ( PLACES) ( PLACES) 0 8 REFER TO RH RUNNER ASSY ( PLACES) ( PLACES REFER TO HYDRAULIC SECTION 7 C A B D 0 9 7A 7 8 9 ( PLACES) (8 PLACES) REFER TO SPRING GUARD MOUNTING

ITEM QTY. PART NO. DESCRIPTION REF 80-0 RH COLUMN ASSEMBLY (BMR-A /) 80-0 RH COLUMN ASSEMBLY (BMR-A /) 9000- HEX HEAD BOLT, /8 - X LG, GRADE 8 8 900- LOCK WASHER, /8 8 90000-0 FLAT WASHER, /8 COLUMN TOP COVER ROLL PIN, /8 X LG. 7 PIN, -7/8 LG. 7 80-0 RH COLUMN 7A 8008 LOCKING FLAT 8 078 MAXON PLATE, WIDE X 0 LG. 9 07 POP RIVET, / X.0 LG. 0 900- ROLL PIN 9-0 LIGHT, STOP/TAIL/TURN LED 9000- POP RIVET, STAINLESS STEEL, / X 9/ LG. 9000-0 BUTTON HEAD SCREW, /8 - X /8 LG. 079 TORSION SPRING 9 SWITCH PLATE 07 COUPLING INSIDE CASTING 7 9 BUSHING, / 8 90 PIN, -/ LG. 9 77 PIN, -/ LG. 0 0-0 COUPLING OUTSIDE, MACHINED 8080-0 BOTTOM STOP ASSEMBLY, RH A 078-0 RH ROTATING BLOCK B 00-0 TORSION SPRING C 9008- FLAT WASHER, /8 D 900- ROLL PIN, / X -/ LG. 8-0 COLUMN COVER, RH 900000- HEX HEAD BOLT, / -0 X /8 LG, GRADE 8 900- LOCK WASHER, /

RH COLUMN ASSEMBLY (WITHOUT TAILLIGHTS) NOTE: Most hydraulic components not shown for clarity. Refer to HYDRAULIC COMPONENTS SECTION for hydraulic system parts. REFER TO HYDRAULIC SECTION ( PLACES) ( PLACES) ( PLACES) ( PLACES) ( PLACES) ( PLACES) 7 REFER TO RH RUNNER ASSY 0 8 ( PLACES) 9 ( PLACES) REFER TO HYDRAULIC SECTION 0 7A 7 8 9 REFER TO SPRING GUARD MOUNTING

ITEM QTY. PART NO. DESCRIPTION REF 80- RH COLUMN ASSEMBLY 9000- HEX HEAD BOLT, /8 - X LG, GRADE 8 8 900- LOCK WASHER, /8 8 90000-0 FLAT WASHER, /8 COLUMN TOP COVER ROLL PIN, /8 X LG. 7 PIN, DIA. X -7/8 LG. 7 80- RH COLUMN 7A 8008 LOCKING FLAT 8 078 MAXON PLATE, WIDE X 0 LG. 9 07 POP RIVET, / X.0 LG. 0 900- ROLL PIN 9000-0 BUTTON HEAD SCREW, /8 - X /8 LG. 079 TORSION SPRING 07 COUPLING INSIDE CASTING 9 BUSHING, / 77 PIN, -/ LG. 0-0 COUPLING OUTSIDE, MACHINED 7 8-0 COLUMN COVER, RH 8 900000- HEX HEAD BOLT, / -0 X /8 LG, GRADE 8 9 900- LOCK WASHER, / 0 9 SWITCH PLATE 90 PIN, -/ LG. 7

RH RUNNER ASSEMBLY (BMR-A) UPPER TANDEM ASSY, RH RUNNER (REF) 8 (8 PLACES) TANDEM ASSY (LOWER) (REF) 0 7 7 8 9 A 0 B ( PLACES) ( PLACES) 7 9 8

ITEM QTY. PART NO. DESCRIPTION REF 8070-0 RH RUNNER ASSEMBLY 9000- HEX HEAD CAP SCREW, /8 - X /8 LG, GRADE 8 900- LOCK WASHER, /8 UPPER PAD SUPPORT ASSEMBLY A/R 00 SPACER 8070-0 RH RUNNER A CHAIN BRACKET WELDMENT B GUSSET, CHAIN BRACKET 9000- HEX HEAD CAP SCREW, /8 - X / LG, GRADE 8 7 8007 ARM WELDMENT 8 900000-0 BOLT, / -0 X -/ LG, GRADE 8 9 PIN COLLAR, / 0 90000 NYLON LOCK NUT, / -0 9000 NYLON LOCK NUT, / -8 78-0 BUMPER, RUBBER 900-0 FLAT WASHER, / 90000- BUTTON HEAD SCREW, / -8 X -/ LG. LOWER PAD SUPPORT ASSEMBLY 9080-0 BEARING, SELF LUBE, -/ DIA. X -/8 LG. 7 9 BEARING, SELF LUBE, -/ DIA. X LG. 8 8 07 POP RIVET, / X.0 LG. 9 PAD 0 GREASE FITTING / NOTE: A/R means As Required. 9

SPRING GUARD MOUNTING RH COLUMN ASSEMBLY RH RUNNER ASSEMBLY ITEM QTY. PART NO. DESCRIPTION 099 FLAT HEAD SCREW, / -0 X -/ LG. 0-0 SPRING GUARD 900000-9 HEX HEAD BOLT, / -0 X -/ LG, GRADE 8 90000 NYLON LOCK NUT, / -0 BUSHING, / DIA. X / LG. CLAMP, #8 RUBBER LOOM 0

UPPER TANDEM ASSEMBLY, RH RUNNER 7 8 7 ITEM QTY. PART NO. DESCRIPTION REF 800-0 UPPER TANDEM ASSEMBLY, RH RUNNER 09-0 ROLLER AXLE 800 ROLLER BRACKET 8 FLAT WASHER,.7 I.D. X -/ O.D. STAINLESS STEEL 0-00 ROLLER 800 ROLLER BRACKET 900 FLAT WASHER, /8 I.D. X -/8 O.D. 7 90008 NYLON LOCK NUT, / -0 8 808-0 ROLLER COVER

TANDEM ASSEMBLY (LOWER) 7 7 ITEM QTY. PART NO. DESCRIPTION REF 800 TANDEM ASSEMBLY 09-0 ROLLER AXLE 800 ROLLER BRACKET 8 FLAT WASHER,.7 I.D. X -/ O.D. STAINLESS STEEL 0-00 ROLLER 800 ROLLER BRACKET 900 FLAT WASHER, /8 I.D. X -/8 O.D. 7 90008 NYLON LOCK NUT, / -0

THIS PAGE INTENTIONALLY LEFT BLANK

LH COLUMN ASSEMBLY (WITH TAILLIGHTS) ( PLACES) ( PLACES) ( PLACES) NOTE: Most hydraulic components not shown for clarity. Refer to HYDRAULIC COMPONENTS SECTION for hydraulic system parts. 0 9 7 8 (8 PLACES) 0 ( PLACES) 7A REFER TO HYDRAULIC SECTION A B C D REFER TO LH RUNNER ASSY 7 8 ( PLACES) ( PLACES) ( PLACES) 7A

ITEM QTY. PART NO. DESCRIPTION REF 80-0 LH COLUMN ASSEMBLY (BMR-A /) 80-0 LH COLUMN ASSEMBLY (BMR-A /) 9000- HEX HEAD CAP SCREW, /8 - X LG, GRADE 8 8 900- LOCK WASHER, /8 8 90000-0 FLAT WASHER, /8 COLUMN TOP COVER ROLL PIN, /8 X LG. 7 PIN, -7/8 LG. 7 80-0 LH COLUMN 7A 8008 LOCKING FLAT 8 078 MAXON PLATE, WIDE X 0 LG. 9 07 POP RIVET, / X.0 LG. 0 9-0 LIGHT, STOP/TAIL/TURN LED 9 PIN COLLAR, -/ LG. 8 9000- POP RIVET, STAINLESS STEEL, / X 9/ LG. 9000-0 BUTTON HEAD SCREW, /8 - X /8 LG. 90 PIN, -/ LG. 80-0 COUPLING, LH, MACHINED 8080-0 BOTTOM STOP ASSEMBLY, LH A 900- ROLL PIN, / X -/ LG. B 9008- FLAT WASHER, I.D. X -/8 O.D. C 078-0 LH ROTATING BLOCK D 00-0 LH TORSION SPRING 7 800-0 TORSION SPRING, LH BMRA 8 80-0 COLUMN COVER, LH

LH COLUMN ASSEMBLY (WITHOUT TAILLIGHTS) ( PLACES) ( PLACES) ( PLACES) 7 8 9 7A REFER TO HYDRAULIC SECTION NOTE: Most hydraulic components not shown for clarity. Refer to HYDRAULIC COMPONENTS SECTION for hydraulic system parts. REFER TO LH RUNNER ASSY ( PLACES) ( PLACES) ( PLACES) 0

ITEM QTY. PART NO. DESCRIPTION REF 80- LH COLUMN ASSEMBLY 9000- HEX HEAD CAP SCREW, /8 - X LG, GRADE 8 8 900- LOCK WASHER, /8 8 90000-0 FLAT WASHER, /8 COLUMN TOP COVER ROLL PIN, /8 X LG. 7 PIN, -7/8 LG. 7 80- LH COLUMN 7A 8008 LOCKING FLAT 8 078 MAXON PLATE, WIDE X 0 LG. 9 07 POP RIVET, / X.0 LG. 0 9 PIN COLLAR, -/ LG. 90 PIN, -/ LG. 80-0 COUPLING, LH, MACHINED 800-0 TORSION SPRING, LH BMRA 80-0 COLUMN SIDE COVER 9000-0 BUTTON HEAD SCREW, /8 - X /8 LG, GRADE 8 7

LH RUNNER ASSEMBLY (BMR-A) UPPER TANDEM ASSY, LH RUNNER (REF) ( PLACES) ( PLACES) 9 (8 PLACES) 8 ( PLACES) ( PLACES) ( PLACES) ( PLACES) 7 B 7 A 8 7 0 9 TANDEM ASSY (LOWER) (REF) 0 8

ITEM QTY. PART NO. DESCRIPTION REF 8070-0 LH RUNNER ASSEMBLY 9000- HEX HEAD CAP SCREW, /8 - X / LG, GRADE 8 900- LOCK WASHER, /8 UPPER PAD SUPPORT ASSEMBLY A/R 00 SPACER 8070-0 LH RUNNER A CHAIN BRACKET WELDMENT B GUSSET, CHAIN BRACKET 9000- HEX HEAD CAP SCREW, /8 - X /8 LG, GRADE 8 7 8007 ARM WELDMENT 8 900000-0 HEX HEAD BOLT, / -0 X -/ LG, GRADE 8 9 PIN COLLAR, / 0 90000 NYLON LOCK NUT, / -0 9000 NYLON LOCK NUT, / -8 78-0 BUMPER, RUBBER 900-0 FLAT WASHER, / 90000- BUTTON HEAD SCREW, / -8 X -/ LG. LOWER PAD SUPPORT ASSEMBLY 9080-0 BEARING, SELF LUBE,.0 DIA. X -/8 LG. 7 9 BEARING, SELF LUBE, -/ DIA. X LG. 8 PAD 9 8 07 POP RIVET, / X.0 LG. 0 GREASE FITTING / NOTE: A/R means As Required. 9

UPPER TANDEM ASSEMBLY, LH RUNNER 7 8 7 ITEM QTY. PART NO. DESCRIPTION REF 800-0 UPPER TANDEM ASSEMBLY, LH RUNNER 09-0 ROLLER AXLE 800 ROLLER BRACKET 8 FLAT WASHER,.7 I.D. X -/ O.D. STAINLESS STEEL 0-00 ROLLER 800 ROLLER BRACKET 900 FLAT WASHER, /8 I.D. X -/8 O.D. 7 90008 NYLON LOCK NUT, / -0 8 808-0 ROLLER COVER 0

THIS PAGE INTENTIONALLY LEFT BLANK

PLATFORM, FLIPOVER, AND CHAIN ASSEMBLY (STEEL) REFER TO LH CHAIN ASSEMBLY FOR STEEL PLATFORM (INCLUDES PARTS,,) 0 REFER TO ALUMINUM RETENTION RAMP ASSEMBLY (FOR STEEL PLATFORM) 9 8 8 7 9 8 7 0 (INCLUDES PARTS,,) 8 FLAT, / X X REFER TO STEEL PLATFORM ASSEMBLY REFER TO RH CHAIN ASSEMBLY FOR STEEL PLATFORM

ITEM QTY. DESCRIPTION PART NO. DEEP 0 DEEP DEEP DEEP FLIPOVER, 9 WIDE VEHICLE (BMR-A -) 8080-8080-0 8080-0 8080-0 FLIPOVER, 0 WIDE VEHICLE (BMR-A -) 8080-8080-0 8080-0 8080-0 FLIPOVER, 9 WIDE VEHICLE (BMR-A -) 8080-8080-07 8080-08 8080-09 FLIPOVER, 0 WIDE VEHICLE (BMR-A -) 8080-8080-0 8080-8080- OPENER ASSEMBLY RH, 0 + 0 * 8000-0 OPENER ASSEMBLY RH, + * 8000-0 OPENER ASSEMBLY RH, + * 8000-0 OPENER ASSEMBLY RH, + * 8000-08 OPENER ASSEMBLY RH, + 0 * 8000-0 OPENER ASSEMBLY LH, 0 + 0 * 8000-0 OPENER ASSEMBLY LH, + * 8000-0 OPENER ASSEMBLY LH, + * 8000-0 OPENER ASSEMBLY LH, + * 8000-07 OPENER ASSEMBLY LH, + 0 * 8000-09 FLAT WASHER, / I.D. STAINLESS STEEL 8 COTTER PIN, /8 X -/ 0077 ROLL PIN, / X -/ LG. 900-7 BUMPER 78-0 8 FLAT WASHER, / 900-0 9 BUTTON HEAD SCREW, / -8 X -/ LG. 90000-0 NYLON LOCK NUT, / -8 9000 PIN, -/ LG. 87 ROLL PIN, /8 X LG. CLEVIS PIN, / X -7/8 LG, GRADE 8 90-0 COTTER PIN, /8 X LG. 0080 ANCHOR SHACKLE 80-0 STOP BLOCK 80 * PLATFORM + FLIPOVER DEPTH

PLATFORM ASSEMBLY (STEEL)

ITEM QTY. DESCRIPTION PART NO. DEEP 0 DEEP DEEP DEEP PLATFORM, 9 WIDE VEHICLE (BMR -) N/A 800-0 800-0 800-0 REF PLATFORM,0 WIDE VEHICLE (BMR -) N/A 800-800- 800- PLATFORM, 9 WIDE VEHICLE (BMR -) N/A 800-0 800-0 800-0 PLATFORM, 0 WIDE VEHICLE (BMR -) N/A 800-800- 800- BEARING, SELF LUBE 7 BEARING, SELF LUBE, -/ DIA. X -/ LG. 9000 NYLON LOCK NUT, / - 9000 RUBBER BUMPER FLAT WASHER, /8 90000-0 HEX HEAD BOLT, /8 - X -/ LG. 9000-

ALUMINUM RETENTION RAMP ASSEMBLY (USE WITH STEEL PLATFORM) ( PLACES) ( PLACES) ( PLACES) 7 ( PLACES) ( PLACES) 9 8 ( PLACES) 0A 0

ITEM QTY. PART NO. DESCRIPTION REF 99-0 AL RET. RAMP ASSY, (9 WIDE VEH) 99-0 AL RET. RAMP ASSY, (0 WIDE VEH) 97-0 ALUMINUM RAMP X 77 LG. (9 WIDE VEH) 97-0 ALUMINUM RAMP X 8 LG. (0 WIDE VEH) HINGE ASSEMBLY LH 9000- FLAT WASHER, /8 009 NYLON LOCK NUT, /8 - RUBBER BUMPER 90000- SCREW, FLAT SOCKET HEAD, /8 - X -/ LG. 7 98 PIPE, / X 0 LG. 8 90000- SCREW, FLAT SOCKET HEAD, /8 - X -/ LG. 9 8 PIN WELDMENT 0 9 LOCKING CAM 0A 097-0 BEARING, SELF LUBE 7 HINGE ASSEMBLY RH 900- ROLL PIN, / X -/ LG. 7

LH CHAIN ASSEMBLY (FOR STEEL PLATFORM) A ITEM QTY. DESCRIPTION PART NO. * + * + * + 0 * + * + * 0 + 0 REF CHAIN ASSEMBLY LH 800-0 800-800-09 800-07 CHAIN 0-0- 0-8 0-7 CLEVIS PIN, / X -7/8 LG. 90-0 TEAR DROP ASSY, LH 800-0 A BEARING, SELF-LUBE 0078 COTTER PIN, /8 X -/ LG. KEEP HANDS CLEAR (PLATE) (SEE DECAL SEC) POP RIVET, / X.0 LG. 0077 REF REF * PLATFORM + FLIPOVER DEPTH 8

ITEM QTY. A RH CHAIN ASSEMBLY (FOR STEEL PLATFORM) DESCRIPTION PART NO. * + * + * + 0 * + * + * 0 + 0 REF CHAIN ASSEMBLY RH 800-0 800-800-0 800-08 CHAIN 0-0- 0-8 0-7 CLEVIS PIN, / X -7/8 LG. 90-0 TEAR DROP ASSY, RH 800-0 A BEARING, SELF-LUBE 0078 COTTER PIN, /8 X -/ KEEP HANDS CLEAR (PLATE) (SEE DECAL SEC) POP RIVET, / X.0 LG. 0077 REF REF * PLATFORM + FLIPOVER DEPTH 9

PLATFORM, FLIPOVER, AND CHAIN ASSEMBLY (ALUMINUM) REFER TO LH CHAIN ASSEMBLY FOR ALUMINUM PLATFORM REFER TO PLATFORM ASSEMBLY (ALUMINUM) 8 REFER TO ALUMINUM RETENTION RAMP ASSEMBLY (FOR ALUMINUM PLATFORM) 7 0 (INCLUDES PARTS, 7,8) ( PLACES) ( PLACES) 8 9 7 ( PLACES) ( PLACES) REFER TO FLIPOVER ASSEMBLY (ALUMINUM) REFER TO RH CHAIN ASSEMBLY FOR ALUMINUM PLATFORM 8 7 8 FLAT, / X X ( PLACES) (INCLUDES PARTS, 7,8) 0

ITEM QTY. PART NO. DESCRIPTION 0077 COTTER PIN, /8 X -/ LG. 8000-0 OPENER ASSEMBLY RH, 0 + 0 * 8000-0 OPENER ASSEMBLY RH, + * 8000-0 OPENER ASSEMBLY RH, + * 8000-0 OPENER ASSEMBLY LH, 0 + 0 * 8000-0 OPENER ASSEMBLY LH, + * 8000-0 OPENER ASSEMBLY LH, + * 809 PIN WELDMENT, -/8 LG. 8009 STOP BLOCK 8-0 PIN, HINGE 7 0-0 LINK SPACER, LG. 8 0- LINK SPACER, / LG. 9 9000- BUTTON HEAD SCREW, /8 - X -/ LG, GRADE 8 0 9000-0 SOCKET HEAD SCREW, /8 - X -/ LG, GRADE 8 9000 NYLON LOCK NUT, /8-90000-0 FLAT WASHER, /8 900- ROLL PIN, / X -/ LG. 90-0 CLEVIS PIN, / X -7/8 LG, GRADE 8 9079-7 ROLL PIN, / X LG. 80877-0 GUSSET 7 80-0 ANCHOR SHACKLE 8 0080 COTTER PIN, /8 X LG. * PLATFORM + FLIPOVER DEPTH

PLATFORM & CHAIN ASSY W/FIXED RAMP (ALUMINUM) REFER TO LH CHAIN ASSEMBLY FOR ALUMINUM PLATFORM REFER TO PLATFORM ASSEMBLY (ALUMINUM) (INCLUDES PARTS 0,,) REFER TO RH CHAIN ASSEMBLY FOR ALUMINUM PLATFORM 0 REFER TO FLIPOVER ASSEMBLY W/FIXED RAMP (ALUMINUM) 0 ( PLACES) 9 8 7 ( PLACES) 9 8 0 0 FLAT, / X X ( PLACES) (INCLUDES PARTS 0,,)

ITEM QTY. PART NO. DESCRIPTION 0077 COTTER PIN, /8 X -/ LG. 8000-0 OPENER ASSEMBLY RH + * 8000-0 OPENER ASSEMBLY RH, + * 8000-0 OPENER ASSEMBLY LH + * 8000-0 OPENER ASSEMBLY LH, + * 809 PIN WELDMENT, -/8 LG. 8009 STOP BLOCK 8-0 PIN, HINGE 7 0-0 LINK SPACER, LG. 8 0- LINK SPACER, / LG. 9 900- ROLL PIN, / X -/ LG. 0 90-0 CLEVIS PIN, / X -7/8 LG, GRADE 8 9079-7 ROLL PIN, / X LG. 80-0 ANCHOR SHACKLE 0080 COTTER PIN, /8 X LG. * PLATFORM + FLIPOVER DEPTH

PLATFORM ASSEMBLY (ALUMINUM) ( PLACES) ( PLACES) REF ITEM QTY. DESCRIPTION PART NO. 0 DEEP DEEP DEEP REF PLATFORM, 9 WIDE VEHICLE 88-0 88-0 88-0 PLATFORM, 0 WIDE VEHICLE 88-0 88-0 88-0 BRACKET 8007 FLAT HEAD SOCKET SCREW, /8 - X -/ LG. 90000- LOCK NUT, /8-9000 ( PLACES) ( PLACES)

PLATFORM FLIPOVER (ALUMINUM - NO RAMP) ( PLACES) 7 ( PLACES) ( PLACES) 7 ( PLACES) 8 ( PLACES) REF ( PLACES) 8 ITEM QTY. DESCRIPTION PART NO. 0 DEEP DEEP DEEP REF FLIPOVER, 9 WIDE VEHICLE 870-0 870-0 870-0 FLIPOVER, 0 WIDE VEHICLE 870-0 870-0 870-0 ROLL PIN, /8 X LG. BUMPER 78-0 CHAIN HOLDER 800 PIN WELDMENT 807 BUTTON SCREW, / -8 X -/ LG. 90000- LOCK NUT, / -8 9000 7 FLAT WASHER, / 900-0 8 SET SCREW, /-8 X / LG. 9000-

PLATFORM FLIPOVER W/FIXED RAMP (ALUMINUM) ( PLACES) 7 ( PLACES) ( PLACES) 7 ( PLACES) 8 ( PLACES) REF ( PLACES) 8 ITEM QTY. DESCRIPTION PART NO. DEEP 0 DEEP REF FLIPOVER, 9 WIDE VEHICLE 877-0 877-0 FLIPOVER, 0 WIDE VEHICLE 877-0 877-0 ROLL PIN, /8 X LG. BUMPER 78-0 CHAIN HOLDER 800 PIN WELDMENT 807 BUTTON SCREW, / -8 X -/ LG. 90000- LOCK NUT, / -8 9000 7 FLAT WASHER, / 900-0 8 SET SCREW, /-8 X / LG. 9000-

THIS PAGE INTENTIONALLY LEFT BLANK 7

ALUMINUM RETENTION RAMP ASSEMBLY (USE WITH ALUMINUM PLATFORM) ( PLACES) ( PLACES) F G A (REF) E D C B RAMP (REF) 9B 9C 9E 9D 9F ( PLACES) ( PLACES) 8A 8 7 9A (REF) 9 0 8

ITEM QTY. PART NO. DESCRIPTION REF 99-0 AL RET. RAMP ASSY, (9 WIDE VEHICLE) 99-07 AL RET. RAMP ASSY, (0 WIDE VEHICLE) 9000- LOCK WASHER, /8 009 LOCK NUT, /8 - RUBBER BUMPER 90000- SOCKET FLAT HD SCREW, /8- X -/ LG, GRADE 8 90000- SOCKET FLAT HD SCREW, /8- X -/ LG, GRADE 8 7 8 PIN WELDMENT, / LG. 8 9 LOCKING CAM 8A 097-0 BEARING, SELF LUBE 9 7 HINGE ASSEMBLY RH 9A REF HINGE WELDMENT, RH 9B 77 PIN WELDMENT, / LG. 9C 8 TORSION SPRING, LH 9D 7 LOCKING ARM ASSY 9E 000 ROLL PIN, /8 X LG. 9F BEARING, SELF LUBE 0 900- ROLL PIN, / X -/ LG. HINGE ASSEMBLY LH A REF HINGE ARM WELDMENT B 8 PIN WELDMENT C 7 GUSSET D 0988-0 ROUND TUBE, ALUMINUM, / LG. E BEARING, SELF LUBE F PIN COLLAR G ROLL PIN, /8 X LG. 9

LH CHAIN ASSEMBLY (FOR ALUMINUM PLATFORM) A ITEM QTY. DESCRIPTION PART NO. * 0 + 0 * + * + * + 0 FIXED RAMP * + FIXED RAMP REF CHAIN ASSEMBLY LH 800-07 800-0 800-0 800-09 CHAIN 0-7 0-0 0-0-8 TEAR DROP ASSY. LH 800-0 A BEARING, SELF-LUBE 0078 CLEVIS PIN, / X - 7/8 LG, GRADE 8 COTTER PIN, /8 X -/ LG. KEEP HANDS CLEAR (PLATE) (SEE DECAL SECTION) POP RIVET, / X.0 LG. 90-0 0077 REF REF * PLATFORM + FLIPOVER DEPTH 0

ITEM QTY. RH CHAIN ASSEMBLY (FOR ALUMINUM PLATFORM) DESCRIPTION PART NO. * 0 + 0 * + * + * + 0 * + FIXED RAMP FIXED RAMP REF REF CHAIN ASSEMBLY RH 800-08 800-0 800-0 800-0 CHAIN 0-7 0-0 0-0-8 TEAR DROP ASSY. RH 800-0 A BEARING, SELF-LUBE 0078 A CLEVIS PIN, / X - 7/8 LG, GRADE 8 COTTER PIN, /8 X -/ LG. KEEP HANDS CLEAR (PLATE) (SEE DECAL SECTION) POP RIVET, / X.0 LG. 90-0 0077 REF REF * PLATFORM + FLIPOVER DEPTH

BMR-A-CS & ONE PIECE LIFTGATE SECTION BMR-A-CS LIFTGATE REFER TO MAIN FRAME & ATTACHING HARDWARE (BMR-A-CS & ONE PIECE) REFER TO CS PLATFORM ASSEMBLY BATTERY BOX (REFER TO ELECTRICAL COMPONENTS) PUMP BOX (REFER TO HYDRAULIC COMPONENTS) CONTROL SWITCH (REFER TO ELECTRICAL COMPONENTS)

BMR-A-ONE PIECE LIFTGATE REFER TO ONE PIECE PLATFORM ASSEMBLIES REFER TO MAIN FRAME & ATTACHING HARDWARE (BMR-A-CS & ONE PIECE) BATTERY BOX (REFER TO ELECTRICAL COMPONENTS) PUMP BOX (REFER TO HYDRAULIC COMPONENTS) CONTROL SWITCH (REFER TO ELECTRICAL COMPONENTS)

MAIN FRAME & ATTACHING HARDWARE (BMR-A-CS & ONE PIECE PLATFORM) - STEEL PLATFORM REFER TO LH COLUMN ASSEMBLY 9 7 REFER TO STEEL PLATFORM ASSEMBLY 8 REFER TO RH COLUMN ASSEMBLY 9

MAIN FRAME & ATTACHING HARDWARE (BMR-A-CS & ONE PIECE PLATFORM) - ALUMINUM PLATFORM REFER TO LH COLUMN ASSEMBLY ( PLACES) 9A 7 ( PLACES) ( PLACES) ( PLACES) 9E 9D 9 0 ( PLACES) REFER TO PLATFORM ASSEMBLY 9C 9B ( PLACES) ( PLACES) 9A 8 REFER TO RH COLUMN ASSEMBLY

ITEM QTY. PART NO. DESCRIPTION 90000-0 FLAT WASHER, / 000 LOCK NUT, / - 08 BOLT, / -0 X -/ LG, 9000- HEX HEAD CAP SCREW, / - X LG, GRADE 8 90000- SOCKET HEAD SCREW, FLAT, /8 - X -/ LG. 90007- SOCKET HEAD CAP SCREW, / - X -/ LG, GRADE 8 7 9000 NYLON LOCK NUT, /8-8 90008 NYLON LOCK NUT, / -0 9 8-0 CONNECTOR BAR ASSEMBLY, 9 WIDE 8-0 CONNECTOR BAR ASSEMBLY, 0 WIDE 9A 9000 BEARING, SELF LUBE, -/ I.D. X -/ LG. 9B 9000- HEX HEAD BOLT, /8 - X -/ LG. 9C 90000-0 FLAT WASHER, /8 9D RUBBER BUMPER 9E 9000 NYLON LOCK NUT, /8-0 9000- FLAT WASHER, /8 900-9 LOCK WASHER, / 900- FLAT WASHER, / 800-0 EXTENSION PLATE, 9 UNIT 800-0 EXTENSION PLATE, 0 UNIT 9000-0 SOCKET HEAD CAP SCREW, / -0 X LG, GRADE 8 800 PIN, LG, STAINLESS STEEL 7

RH COLUMN ASSEMBLY (BMR-A-CS & ONE PIECE) NOTE: Most hydraulic components not shown for clarity. Refer to HYDRAULIC COMPONENTS SECTION for hydraulic system parts. REFER TO HYDRAULIC SECTION ( PLACES) ( PLACES) ( PLACES) 0 REFER TO RH RUNNER ASSY 0 7 REFER TO HYDRAULIC SECTION 9 7A 8 7 8 9 (8 PLACES) REFER TO SPRING GUARD MOUNTING 8

ITEM QTY. PART NO. DESCRIPTION REF 807-0 RH COLUMN ASSEMBLY 9000- HEX HEAD BOLT, /8 - X LG, GRADE 8 8 900- LOCK WASHER, /8 8 90000-0 FLAT WASHER, /8 COLUMN TOP COVER ROLL PIN, /8 X LG. 7 PIN, -7/8 LG. 7 809-0 RH COLUMN 7A 8008 LOCKING FLAT 8 078 MAXON PLATE, X 0 LG. 9 07 POP RIVET, / X.0 LG. 0 8-0 COLUMN SIDE COVER 9-0 LIGHT, STOP/TAIL/TURN LED 8 9000- POP RIVET, STAINLESS STEEL, / X 9/ LG. 0-0 COUPLING OUTSIDE, MACHINED 9000-0 BUTTON HEAD SCREW, /8 - X /8 LG, GRADE 8 90 PIN, -/ LG. 07 COUPLING INSIDE CASTING 7 9 BUSHING, / 8 900- ROLL PIN, / X LG. 9 77 PIN, -/ LG. (COUPLING AND CYLINDER) 0 900000- HEX HEAD BOLT, / -0 X /8 LG, GRADE 8 9 SWITCH PLATE 079 TORSION SPRING 900- LOCK WASHER, / 9

RH RUNNER ASSEMBLY (BMR-A-CS & ONE PIECE) UPPER TANDEM ASSY, RH RUNNER (REF) 9 (8 PLACES) TANDEM ASSY (LOWER) (REF) 8 7 8 7 0 7 0

ITEM QTY. PART NO. DESCRIPTION REF 8070-0 RH RUNNER ASSEMBLY 9000- HEX HEAD CAP SCREW, /8 - X / LG, GRADE 8 900- LOCK WASHER, /8 UPPER PAD SUPPORT ASSEMBLY A/R 00 SPACER 80708-0 RH RUNNER 9000- HEX HEAD CAP SCREW, /8 - X /8 LG, GRADE 8 7 8007 ARM WELDMENT 8 GREASE FITTING / 9 8 07 POP RIVET, / X.0 LG. 0 PAD 9000 NYLON LOCK NUT, / -8 78-0 BUMPER 900-0 FLAT WASHER, / 90000- BUTTON HEAD SCREW, / -8 X -/ LG. LOWER PAD SUPPORT ASSEMBLY 9080-0 BEARING, SELF LUBE, -/ I.D. X -/8 LG. 7 9 BEARING, SELF LUBE, -/8 I.D. X LG. 8 8009-0 BUSHING NOTE: A/R means As Required.

TANDEM ASSEMBLY (LOWER) 7 7 ITEM QTY. PART NO. DESCRIPTION REF 800 LOWER TANDEM ASSEMBLY 09-0 ROLLER AXLE 800 ROLLER BRACKET 8 FLAT WASHER,.7 I.D. X -/ O.D. STAINLESS STEEL 0-00 ROLLER 800 ROLLER BRACKET 900 FLAT WASHER, /8 I.D. X -/8 O.D. 7 90008 NYLON LOCK NUT, / -0

THIS PAGE INTENTIONALLY LEFT BLANK

LH COLUMN ASSEMBLY (BMR-A-CS & ONE PIECE) ( PLACES) ( PLACES) ( PLACES) NOTE: Most hydraulic components not shown for clarity. Refer to HYDRAULIC COMPONENTS SECTION for hydraulic system parts. 9 (8 PLACES) 7 8 0 ( PLACES) 7A REFER TO HYDRAULIC SECTION REFER TO LH RUNNER ASSY 7 ( PLACES) ( PLACES) ( PLACES)

ITEM QTY. PART NO. DESCRIPTION REF 80-0 LH COLUMN ASSEMBLY 9000- HEX HEAD CAP SCREW, /8 - X LG, GRADE 8 8 900- LOCK WASHER, /8 8 90000-0 FLAT WASHER, /8 COLUMN TOP COVER ROLL PIN, /8 X LG. 7 PIN, -7/8 LG. 7 808-0 LH COLUMN 7A 8008 LOCKING FLAT 8 078 MAXON PLATE, WIDE X 0 LG. 9 07 POP RIVET, / X.0 LG. 0 9-0 LIGHT, STOP/TAIL/TURN LED 8 9000- POP RIVET, STAINLESS STEEL, / X 9/ LG. 800-0 TORSION SPRING 9000-0 BUTTON HEAD SCREW, /8 - X /8 LG, GRADE 8 90 PIN, -/ LG. 80-0 COUPLING LH, MACHINED 9 PIN COLLAR, -/ 7 809-0 COLUMN COVER, LH 7

LH RUNNER ASSEMBLY (BMR-A-CS & ONE PIECE) 9 (8 PLACES) UPPER TANDEM ASSY LH RUNNER (REF) ( PLACES) ( PLACES) 0 ( PLACES) 7 ( PLACES) 8 8 7 TANDEM ASSY (LOWER) (REF) 7 8

ITEM QTY. PART NO. DESCRIPTION REF 80709-0 LH RUNNER ASSEMBLY 9000- HEX HEAD CAP SCREW, /8 - X / LG, GRADE 8 900- LOCK WASHER, /8 UPPER PAD SUPPORT ASSEMBLY A/R 00 SPACER 80707-0 LH RUNNER 9000- HEX HEAD CAP SCREW, /8 - X /8 LG. 7 8007 ARM WELDMENT 8 GREASE FITTING / 9 8 07 POP RIVET, / X.0 LG. 0 PAD 9000 NYLON LOCK NUT, / -8 78-0 BUMPER 900-0 FLAT WASHER, / 90000- BUTTON HEAD SCREW, / -8 X -/ LG, GRADE 8 LOWER PAD SUPPORT ASSEMBLY 9080-0 BEARING, SELF LUBE, -/ I.D. X -/8 LG. 7 9 BEARING, SELF LUBE, -/8 I.D. X LG. 8 8009-0 BUSHING NOTE: A/R means As Required. 9

THIS PAGE INTENTIONALLY LEFT BLANK 7

CS PLATFORM ASSEMBLY (STEEL) 0 (READ NOTE) A NOTE: THE LOCKING ROUND WEDGES SHOWN ARE ONLY ON DEEP PLATFORM. 7 8 9A A (READ NOTE) 9 8 7 9A 7

ITEM QTY. PART NO. DESCRIPTION 88- CS PLATFORM ASSY (STL, DEEP, 9 WIDE VEH) REF 88-7 CS PLATFORM ASSY (STL, DEEP, 9 WIDE VEH) 88- CS PLATFORM ASSY (STL, DEEP, 0 WIDE VEH) 88-7 CS PLATFORM ASSY (STL, DEEP, 0 WIDE VEH) 0077 PIN, COTTER /8 X -/ LG. 0-9 CHAIN, /8 X LG. 808-0 RAMP, BMRA-CS EXTRUDED A 90800-0 BEARING, SELF LUBE, I.D. X LG. 077 PIN, X -/8 LG. 087 PIN, / X -7/8 LG. 0877 PIN, / X -/ LG. 7 800 CHAIN HOLDER, CASTING 8 80 STOP BLOCK 87-0 PLATFORM ( DEEP, 9 WIDE VEHICLE) 9 87-0 PLATFORM ( DEEP, 9 WIDE VEHICLE) 87-0 PLATFORM ( DEEP, 0 WIDE VEHICLE) 87-0 PLATFORM ( DEEP, 0 WIDE VEHICLE) 9A 9000 BEARING, SELF LUBE, -/ DIA. X -/ LG. 0 800-0 HORIZONTAL RAIL, LH ( DEEP PLATFORM) 800-0 HORIZONTAL RAIL, LH ( DEEP PLATFORM) 800-0 HORIZONTAL RAIL, RH ( DEEP PLATFORM) 800-0 HORIZONTAL RAIL, RH ( DEEP PLATFORM) 80-0 FOLDING RAIL, LH (9 WIDE VEHICLE) 80-0 FOLDING RAIL, LH (0 WIDE VEHICLE) 7

CS PLATFORM ASSEMBLY (STEEL) - Continued 7 8 9 9 0 9 (READ NOTE) 8 7 0 9 0 0 0 9 0 9 8 9 0 7 0 8 NOTE: THE LOCKING ROUND WEDGES SHOWN ARE ONLY ON DEEP PLATFORM. (READ NOTE) 9 7 7

ITEM QTY. PART NO. DESCRIPTION 80-0 FOLDING RAIL, RH (9 WIDE VEHICLE) 80-0 FOLDING RAIL, RH (0 WIDE VEHICLE) 80-0 CORNER POST, LH 80-0 CORNER POST, RH 809-0 PIN WELDMENT, LG. 7 9000- SOCKET HEAD SCREW, / -0 X -/ LG. 8 90000 NYLON LOCK NUT, / -0 9 9000- SET SCREW, / -8 X / LG, FLAT POINT 0 900- ROLL PIN, / X -/ LG. 900- ROLL PIN, / X LG. 90-0 CLEVIS PIN, / X -7/8 LG. 0008-0 CHAIN, #, LINKS 080 BALL LOCK PIN 07 LATCH ASSEMBLY 00- CHAIN, /0, LG. 7 07 BEARING, SELF LUBE, / I.D. X /8 LG. 8 80-0 PIN WELDMENT, -/ LG. 9 097-0 BEARING, SELF LUBE, / I.D. X LG. 0 0080 COTTER PIN, /8 X LG. 7

ONE PIECE STEEL PLATFORM ASSEMBLY 7 9 8 0 0 STEEL PLATFORM AND ALUMINUM RETENTION RAMP ASSEMBLY 9 0 7 0 8 7

ITEM QTY. PART NO. DESCRIPTION 8-07 -PC PLATFORM ASSY (STL, DEEP, 9 WIDE VEH) REF 8-08 -PC PLATFORM ASSY (STL, 8 DEEP, 9 WIDE VEH) 8-7 -PC PLATFORM ASSY (STL, DEEP, 0 WIDE VEH) 8-8 -PC PLATFORM ASSY (STL, 8 DEEP, 0 WIDE VEH) 0077 COTTER PIN, /8 X -/ LG. 0-9 CHAIN, /8 X LG. 800 CHAIN HOLDER 80 STOP BLOCK 0080 COTTER PIN, /8 X LG. 809-0 PIN WELDMENT, LG. 7 9000- SOCKET HEAD SCREW, / -0 X -/ LG. 8 90000 NYLON LOCK NUT, / -0 9 9000- SET SCREW, / -8 X / LG, FLAT POINT 0 90-0 CLEVIS PIN, / X -7/8 LG. 77

STEEL PLATFORM AND ALUMINUM RETENTION RAMP ASSEMBLY REFER TO ALUMINUM RETENTION RAMP ASSEMBLY (USED WITH STEEL PLATFORM) 78

ITEM QTY. PART NO. DESCRIPTION 8-0 PLATFORM ( DEEP, 9 WIDE VEHICLE) REF 8-0 PLATFORM (8 DEEP, 9 WIDE VEHICLE) 8-0 PLATFORM ( DEEP, 0 WIDE VEHICLE) 8-0 PLATFORM (8 DEEP, 0 WIDE VEHICLE) 9000 BEARING, SELF LUBE, -/ DIA. X -/ LG. 9000 NYLON LOCK NUT, / - RUBBER BUMPER 90000-0 FLAT WASHER, /8 9000- HEX HEAD BOLT, /8 - X -/ LG. 79

ALUMINUM RETENTION RAMP ASSEMBLY (USED WITH STEEL PLATFORM) ( PLACES) ( PLACES) ( PLACES) ( PLACES) ( PLACES) 7 9 8 ( PLACES) 0A 0 80

ONE PIECE ALUMINUM PLATFORM ASSEMBLY ( DEEP) 8 7 0 9 8 0 8 REFER TO ALUMINUM RETENTION RAMP ASSEMBLY (USED WITH ALUMINUM PLATFORM) 9 ( PLACES) ( PLACES) 7 8 9 8 8 7 0 8

ITEM QTY. PART NO. DESCRIPTION REF 80-0 -PC PLATFORM ASSY (AL, DEEP, 9 WIDE VEH) 80-0 -PC PLATFORM ASSY (AL, DEEP, 0 WIDE VEH) 0077 COTTER PIN, /8 X -/ LG. ROLL PIN, /8 X LG. 0- CHAIN, -7/8 LG. 800 CHAIN HOLDER CASTING 8007 BRACKET 807 PIN WELDMENT, -7/8 LG. 7 777-0 STOP BLOCK 8 808-0 LOCKING ROUND WEDGE 9 800-0 PLATFORM WELDMENT (9 WIDE VEHICLE) 800-0 PLATFORM WELDMENT (0 WIDE VEHICLE) 0 809-0 PIN WELDMENT, -/ LG. 90000- SOCKET FLAT HEAD SCREW, /8 - X -/ LG. 9000-0 BUTTON HEAD CAP SCREW, /8 - X -/ LG. 9000-0 SOCKET HEAD SCREW, /8 - X -/ LG. 9000 NYLON LOCK NUT, /8-90000-0 FLAT WASHER, /8 9000- SET SCREW, / -8 X / LG, FLAT POINT 7 900- ROLL PIN, / X -/ LG. 8 90-0 CLEVIS PIN, / X -7/8 LG. 9 900-0 BEARING, SELF LUBE, / I.D. X -/ LG. 0 80877-0 GUSSET 0080 COTTER PIN, /8 X LG. 8

ONE PIECE ALUMINUM PLATFORM ASSEMBLY (8 DEEP) 8 0 9 8 7 0 8 REFER TO ALUMINUM RETENTION RAMP ASSEMBLY (USED WITH ALUMINUM PLATFORM) 7 ( PLACES) ( PLACES) 9 8 ( PLACES) ( PLACES) 9 0 7 7 8 8 8

ITEM QTY. PART NO. DESCRIPTION REF 80-0 -PC PLATFORM ASSY (AL, 8 DEEP, 9 WIDE VEH) 80-0 -PC PLATFORM ASSY (AL, 8 DEEP, 0 WIDE VEH) 0077 COTTER PIN, /8 X -/ LG. ROLL PIN, /8 X LG. 0- CHAIN, -7/8 LG. 800 CHAIN HOLDER CASTING 8007 BRACKET 807 PIN WELDMENT, -7/8 LG. 7 777-0 STOP BLOCK 8 808-0 LOCKING ROUND WEDGE 9 800-0 PLATFORM WELDMENT (9 WIDE VEHICLE) 800-0 PLATFORM WELDMENT (0 WIDE VEHICLE) 0 809-0 PIN WELDMENT, -/ LG. 90000- SOCKET FLAT HEAD SCREW, /8 - X -/ LG. 9000-0 BUTTON HEAD CAP SCREW, /8 - X -/ LG. 9000-0 SOCKET HEAD SCREW, /8 - X -/ LG. 9000 NYLON LOCK NUT, /8-90000-0 FLAT WASHER, /8 9000- SET SCREW, / -8 X / LG, FLAT POINT 7 900- ROLL PIN, / X -/ LG. 8 90-0 CLEVIS PIN, / X -7/8 LG, GRADE 8 9 900-0 BEARING, SELF LUBE, / I.D. X -/ LG. 0 80877-0 GUSSET 0080 COTTER PIN, /8 X LG. 8

ALUMINUM RETENTION RAMP ASSEMBLY (USED WITH ALUMINUM PLATFORM) ( PLACES) ( PLACES) F A (REF) G E D C B 9B 9C 9E 9D 9F 9A (REF) ( PLACES) ( PLACES) 8A 8 7 0 9 8

ITEM QTY. PART NO. DESCRIPTION REF 99-0 AL RET. RAMP ASSY, (9 WIDE VEHICLE) 99-07 AL RET. RAMP ASSY, (0 WIDE VEHICLE) 97-0 ALUMINUM RAMP (9 WIDE VEHICLE) 97-07 ALUMINUM RAMP (0 WIDE VEHICLE) 9000- LOCK WASHER, /8 009 LOCK NUT, /8 - RUBBER BUMPER 90000- SOCKET FLAT HD SCREW, /8- X -/ LG, GRADE 8 90000- SOCKET FLAT HD SCREW, /8- X -/ LG, GRADE 8 7 8 PIN WELDMENT, / LG. 8 9 LOCKING CAM 8A 097-0 BEARING, SELF LUBE 9 7 HINGE ASSEMBLY RH 9A REF HINGE WELDMENT, RH 9B 77 PIN WELDMENT, / LG. 9C 8 TORSION SPRING, LH 9D 7 LOCKING ARM ASSY 9E 000 ROLL PIN, /8 X LG. 9F BEARING, SELF LUBE 0 900- ROLL PIN, / X -/ LG. HINGE ASSEMBLY LH A REF HINGE ARM WELDMENT B 8 PIN WELDMENT C 7 GUSSET D 0988-0 ROUND TUBE, ALUMINUM, / LG. E BEARING, SELF LUBE F PIN COLLAR G ROLL PIN, /8 X LG. 87

HYDRAULIC COMPONENTS DUAL PUMP ASSEMBLY (POWER DOWN) ( PLACES) ( PLACES) 8 ( PLACES) A 7 REFER TO PUMP/MOTOR, POWER DOWN ( PLACES) 0 0 9 7 0 9 ( PLACES) 8 ( PLACES) 88

ITEM QTY. PART NO. DESCRIPTION REF - 00 DUAL PUMP ASSEMBLY, POWER DOWN 7-0 GROUND STUD DECAL 9 LOCK WASHER, /8 ZINC 9 CAP SCREW, /8 - X -/ LG. 70079 PLUG, /8 GROMMET, / RUBBER 9 FILLER CAP 7 8 DECAL PUMP SELECTOR 8 90000- CAP SCREW, / -0 X / LG. 9 900- LOCK WASHER, / X / THK. 0 090 SPIN-ON OIL FILTER 7 90 ELBOW, 90, SAE# X JIC7# 97 HP HOSE, /8, X -/8 LG, JIC# F-F 9077 ELBOW,, /8 NPT X /8 JIC 70 STRAIGHT UNION SAE#8 X JIC#8 M-M FLOW DIVIDER A 900 WASHER, THREAD SEAL 9 HP HOSE, /8 X -/8 LG, JIC# F-F 7 97 HP HOSE, /8 X 7-/ LG, JIC# F-F 8 UNION, BULKHEAD, SAE 7 FLARE TWIN 9 90000-0 FLAT WASHER, / 0 NUT, BULKHEAD, SAE 7 FLARE TWIN 00 ELBOW, 90, JIC#8-M X JIC#8-F 89

DUAL PUMP ASSEMBLY (POWER DOWN) - Continued REFER TO PUMP/MOTOR, POWER DOWN ( PLACES) 8 9 0 7 9 8 9 0 0 7 90

ITEM QTY. PART NO. DESCRIPTION 9007 ELBOW JIC# M-F SW 9009 STRAIGHT UNION JIC# 900- FLAT WASHER, 9/ ZINC 9008 NUT, BULKHEAD, JIC# 9 HP HOSE, /8 X -7/8, 90, JIC# & # 7 0 PUMP BOX ASSEMBLY (DUAL PUMP) 8 80 TEE, STRAIGHT THREAD, O-RING 9 09 HP HOSE, /8 X -7/8 LG, JIC# F-F 0 90 FITTING, STRAIGHT THD. SAE# X JIC # 97 HP HOSE, /8 X 7-7/ LG, JIC# F-F 98 IN-LINE SHUTTLE VALVE 90000- FLAT WASHER, / X 7/ 90 ELBOW, 90 JIC# M-F 9008 NUT, BULKHEAD, JIC# 9000 STRAIGHT UNION JIC# 7 908 SWIVEL, SAE 7, /8 M-JIC# 8 0-0 DECAL, P/D HYDRAULIC FLUID LEVEL 9 9080-0 O-RING 0 70-0 DECAL, PUMP 70-0 DECAL, PUMP 9

SINGLE PUMP ASSEMBLY (POWER DOWN) ( PLACES) ( PLACES) ( PLACES) 8 ( PLACES) 9A 9 0 7 8 7 0 9 0 9 REFER TO PUMP/MOTOR, POWER DOWN 7 ( PLACES) 8 ( PLACES) 9

ITEM QTY. PART NO. DESCRIPTION REF - 800 SINGLE PUMP ASSEMBLY, POWER DOWN 9 CAP SCREW, /8 - X -/ 9 LOCK WASHER, /8 70079 PLUG, /8 90 FITTING, STR. THD., O-RING SAE # & JIC 9 HP HOSE, /8 X -7/8, 90 JIC # 9009 STRAIGHT UNION JIC # 7 908 BULKHEAD UNION ELBOW SAE #, JIC 8 970 HP HOSE, /8 X LG, JIC # F-F 9 9007 ELBOW JIC # M-F SW 0 90000- FLAT WASHER, / X 7/ 9008 NUT, BULKHEAD JIC # 90 ELBOW, 90, JIC #8-M X JIC #-F 9008 NUT, BULKHEAD JIC # 9000 FLAT WASHER, 9/ 00 ELBOW, 90, JIC #8-M X JIC #8-F NUT, BULKHEAD, SAE 7 FLARE TWIN 7 90000-0 FLAT WASHER,.70 X.090 THK 8 UNION, BULKHEAD, SAE 7 FLARE TWIN 9 FLOW DIVIDER 9A 900 WASHER, THREAD SEAL 0 70 STRAIGHT UNION, O-RING, SAE #8-M JIC #8-M 97 HP HOSE, /8 X 7-9/ LG, JIC # F-F 97 HP HOSE, /8 X -/8 LG, JIC # F-F 90 ELBOW, 90, SAE # X JIC 7 # 007 CONNECTOR, /8 X /8 MALE 090 SPIN-ON OIL FILTER 90000- CAP SCREW, /-0 X / 7 900- LOCK WASHER, / X /8 8 GROMMET, / 9 80 SINGLE PUMP BOX ASSEMBLY 0 90 FITTING, STRAIGHT THD. O-RING SAE # & JIC 7-0 GROUND STUD DECAL 0-0 DECAL, P/D HYDRAULIC FLUID LEVEL 9080-0 O-RING 9

PUMP/MOTOR (POWER DOWN) NOTE: TYPICAL SOLENOID VALVE IS SHOWN DISASSEMBLED. NUT (REF) C, A, B, C, A, B, C B A 0 7 8 9 9

ITEM QTY. PART NO. DESCRIPTION REF - 9 PUMP/MOTOR, POWER DOWN 900 VALVE, POSITION, -WAY A 9 O-RING KIT, -WAY VALVE B 900 VALVE CARTRIDGE ONLY C 900 COIL ONLY 808-0 WIRE ASSEMBLY, BMRA MOTOR 800-0 SWITCH SOLENOID 900 RELIEF VALVE (00 PSI) 900 RELIEF VALVE (00 PSI) 9009 VALVE, POSITION, -WAY 7 009 MOTOR, VDC 8 88 O-RING 9 9000 GEAR PUMP 0 900 FILTER, PUMP INLET 900 VALVE, POSITION, WAY A 9 O-RING KIT, -WAY (NOT SHOWN) B 9007 VALVE CARTRIDGE ONLY C 9008 COIL ONLY 900 CHECK VALVE (F VALVE) 900 NEEDLE VALVE 900 NEEDLE VALVE 09 RELIEF VALVE 9000 MANIFOLD BLOCK ASSEMBLY (WITH VALVES) 9

HYDRAULIC COMPONENTS (POWER DOWN) B C D LEFT CYLINDER A 7 7B 7A PUMP BOX (DUAL OR SINGLE PUMP POWER DOWN) - REFERENCE 7 B C 9,A 0 D,A RIGHT CYLINDER REFER TO SPRING GUARD MOUNTING 0 A 9 8 CONNECTOR (REF) 7 CONNECTOR (REF) 8 CAUTION To prevent damage to hose assembly, item 8, ensure hose is not twisted in the spring guard & flexible cable is not wrapped around hose. Fingertighten each hose connector. Check for twisting. If necessary, rotate hose to remove twists. Do not over-tighten. Torque each connector to 7. lb-ft. CAUTION To prevent leaky face seal connectors, ensure face seal o-rings are in place before connecting hoses and fittings. 9

ITEM QTY. PART NO. DESCRIPTION 907 ELBOW, /8 X / M-M 07 HYDRAULIC LOCK & VALVE ASSY A 908 ELBOW STRAIGHT, #8 X # M-M B 0 ELBOW 90 STRAIGHT, # X / M-M C 7 VALVE, PRESSURE COMPENSATED, GPM D 907 STRAIGHT CONNECTOR, FS #8 TO NPTF # M-M 7 809-0 RETURN TUBE ASSEMBLY 8 9080 UNION, FACE SEAL,# -#, / M - /8 M 9 808-0 LIFTING TUBE ASSEMBLY 0 90 UNION, #8 M-M 9-0 HP HOSE, / X 00 LG, # FS & # FS F-F 900 TEE, UNION /8 F.S. MALE, -JLO A 907-0 O-RING #, /8 ORFS TUBE END 9-0 HP HOSE, / X LG, FS # F-F 80-0 CYLINDER, -/ DIA. X -/8 STROKE (BMRA-/-) 80-0 CYLINDER, DIA. X -/8 STROKE (BMRA-/-) A 80 SEAL KIT, CYL. (BMRA-/-) 80 SEAL KIT, CYL. (BMRA-/-) 800-0 U TUBE ASSEMBLY, 98 X 90 ELBOW BULKHEAD UNION, # M-M 7 908-0 VALVE ASSEMBLY, IMMERSION PROOF, VDC 7A 908-0 COIL, VDC 7B 900 VALVE CARTRIDGE, WP 8 09 HP HOSE, / X LG, # & # FS F-F (SEE CAUTION.) 97

HYDRAULIC COMPONENTS (POWER DOWN) - Continued LEFT CYLINDER PUMP BOX (DUAL OR SINGLE PUMP POWER DOWN) - REFERENCE 0 RIGHT CYLINDER REFER TO SPRING GUARD MOUNTING 7 7 8 9B 9,9A 9C 98

ITEM QTY. PART NO. DESCRIPTION 9 0 CLOSING CYLINDER 9A 808 SEAL KIT, CYLINDER 9B 9079 CONNECTOR, # X # M-M 9C 7 BEARING, SELF-LUBE 809-0 HP HOSE, / X LG, # FS JIC# F-F 0 809-0 HP HOSE, / X LG, # FS JIC# F-F 809-0 HP HOSE, / X 8 LG, # FS JIC# F-F 80-0 HP HOSE, /8 X LG, #8 FS JIC#8 F-F 80-0 HP HOSE, /8 X 7 LG, #8 FS JIC#8 F-F 80-0 HP HOSE, /8 X 9 LG, #8 FS JIC#8 F-F 80-0 HP HOSE, /8 X LG, #8 FS JIC#8 F-F 80-0 HP HOSE, /8 X 9 LG, #8 FS JIC#8 F-F 80-0 HP HOSE, /8 X LG, #8 FS JIC#8 F-F 80-0 HP HOSE, /8 X LG, #8 FS JIC#8 F-F 80-0 HP HOSE, /8 X 88 LG, #8 FS JIC#8 F-F 80-0 HP HOSE, /8 X 08 LG, #8 FS JIC#8 F-F 907-0 O-RING, # (/ FACE SEAL TUBE-END) 907-0 O-RING, # (/8 FACE SEAL TUBE-END) 907-0 O-RING, #8 (/ FACE SEAL TUBE-END) 7 907 UNION, FACE SEAL, # M-M 8 009 BREATHER 99

DUAL PUMP ASSEMBLY (GRAVITY DOWN) REFER TO PUMP/MOTOR GRAVITY DOWN ( PLACES) ( PLACES) ( PLACES) ( PLACES) 7 7A 8 9 9 7 0 7 ( PLACES) 8 0 8 9 0 00

ITEM QTY. PART NO. DESCRIPTION REF - 800 DUAL PUMP ASSY, GRAVITY DOWN 9 CAP SCREW, /8 - X -/ 9 LOCK WASHER, /8 7-0 GROUND STUD DECAL 90 ELBOW, 90, SAE # X JIC 7 # 09 HP HOSE, /8 X -7/8 LG, JIC # F-F 9 HP HOSE, /8 X -/8 LG, JIC # F-F 7 80 TEE, STRAIGHT THREAD, O-RING 8 90 FITTING STR. THD. SAE # X JIC # 9 9 HP HOSE, /8 X -7/8, 90 JIC # 0 9008 NUT, BULKHEAD, JIC # 90000- FLAT WASHER, / X 7/ 9009 STRAIGHT UNION JIC # 9007 ELBOW, JIC # M-F SW 0 PUMP BOX ASSEMBLY (DUAL PUMP) 00 ELBOW, 90, JIC #8-M X JIC #8-F NUT, BULKHEAD, SAE 7 FLARE TWIN 7 900- FLAT WASHER, / X -/ 8 00 AIR FITTING 9 GROMMET, / 0 0-0 DECAL, G/D HYDRAULIC FLUID LEVEL 900- LOCK WASHER, / X / THK. 90000- HEX HEAD CAP SCREW, / -0 X / 9077 ELBOW,, /8 NPT X /8 JIC 090 SPIN-ON OIL FILTER 97 HP HOSE, /8 X -/8 LG, JIC # F-F. UNION, BULKHEAD, SAE 7 FLARE TWIN 7 FLOW DIVIDER 7A 900 WASHER, THREAD SEAL 8 70 STRAIGHT UNION, SAE #8 X JIC #8 M-M 9 97 HP HOSE, /8 X 7-9/ LG, JIC # F-F 0 98 GROMMET, /8 9080-0 O-RING 70-0 DECAL, PUMP 70-0 DECAL, PUMP 0

SINGLE PUMP ASSEMBLY (GRAVITY DOWN) ( PLACES) ( PLACES) ( PLACES) 9 ( PLACES) 8 8A 7 7 8 9 0 8 8 0 REFER TO PUMP/MOTOR GRAVITY DOWN 7 ( PLACES) ( PLACES) 0

ITEM QTY. PART NO. DESCRIPTION REF - 800 SINGLE PUMP ASSY, GRAVITY DOWN 9 CAP SCREW, /8 - X -/ 9 LOCK WASHER, /8 7-0 GROUND STUD DECAL 97 HP HOSE, /8 X -/8 LG, JIC # F-F 90 ELBOW, 90, SAE # X JIC 7 # 98 GROMMET, /8 7 9 HP HOSE, /8 X -7/8 LG, 90, JIC # 8 90 FITTING, STR. THD., O-RING SAE # & JIC 9 9007 ELBOW, JIC # M-F SW 0 9009 STRAIGHT UNION JIC # 00 ELBOW, 90, JIC #8-M X JIC #8-F NUT, BULKHEAD, SAE 7 FLARE TWIN 90000-0 FLAT WASHER,.70 X.090 THK 90000- FLAT WASHER, / X 7/ 9008 NUT, BULKHEAD, JIC # 97 HP HOSE, /8 X 7-9/ LG, JIC # F-F 7 70 STRAIGHT UNION, SAE #8-M JIC #8-M 8 FLOW DIVIDER 8A 900 WASHER, THREAD SEAL 9 UNION, BULKHEAD, SAE 7 FLARE TWIN 0 090 SPIN-ON OIL FILTER 007 CONNECTOR, /8 X /8 MALE 90000- HEX HEAD CAP SCREW, / -0 X / 900- LOCK WASHER, / X /8 0-0 DECAL, G/D HYDRAULIC FLUID LEVEL GROMMET, / 00 AIR FITTING 7 80 SINGLE PUMP BOX ASSEMBLY 8 9080-0 O-RING 0

PUMP/MOTOR (GRAVITY DOWN) NOTE: TYPICAL SOLENOID VALVE IS SHOWN DISASSEMBLED. NUT (REF), A, B, C 0 B C A 7 8 9 0

ITEM QTY. PART NO. DESCRIPTION REF - 78 PUMP/MOTOR, GRAVITY DOWN 900 VALVE, SOLENOID -WAY A 9 O-RING KIT, -WAY VALVE B 900 VALVE CARTRIDGE ONLY C 900 COIL ONLY 808-0 WIRE ASSEMBLY, BMRA MOTOR 800-0 SWITCH, SOLENOID 900 RELIEF VALVE (00 PSI) 900 FILTER, PUMP INLET 9009 VALVE, POSITION, -WAY 7 009 MOTOR, VDC 8 88 O-RING 9 9000 GEAR PUMP 0 900 NEEDLE VALVE 900 NEEDLE VALVE 09 RELIEF VALVE 900 CHECK VALVE (F&G VALVES) 9009 MANIFOLD BLOCK ASSEMBLY (WITH VALVES) 0

DUAL PUMP ASSEMBLY (EQUIPPED WITH STEEL LINES) (8 PLACES) ( PLACES) ( PLACES) 8 9 7 HEX NUT SUPPLIED WITH FITTING # 7 9 0 0 (8 PLACES) 9 0 8 ( PLACES) ( PLACES) 8 0

ITEM QTY. PART NO. DESCRIPTION 8800-0 HE000 POWER UNIT ASSEMBLY (HALDEX) 8 REF SCREW, / -0 X LG. 0 REF WASHER, 9/ X /8 X / REF STEEL PLUG, 7/ -0 8808-0 FITTING, # STRAIGHT (HALDEX) 8787-0 TUBE ASSEMBLY, MANF-CL LINE (HALDEX) 7 8788-0 TUBE ASSEMBLY, MANF-FL DIV (HALDEX) 8 80-0 GASKET, BATTERY SWITCH 9 REF LOCK WASHER, /8 X / X / 0 REF HEX NUT, /8-880-0 BREATHER, (HALDEX) 88-0 FITTING, AIR BRAKE TUBE, (HALDEX) 880-0 DRAW LATCH, (HALDEX) 88-0 TUBE ASSY, PMP-PMP C/LINE, (HALDEX) 8809-0 FITTING, # ELBOW SWIVEL (HALDEX) 88-0 FITTING, # BULKHEAD (HALDEX) 7 880-0 SIGHT GLASS (HALDEX) 8 880-0 GROMMET, / X X / (HALDEX) 9 88-0 FITTING, #8 ELBOW SWIVEL (HALDEX) 0 8798-0 GROMMET, / X -/8 X /8 (HALDEX) REF SCREW, / -0 X / LG. 8807-0 FITTING, #8 STR EXTENDED (HALDEX) 879-0 FLOW DIVIDER ASSEMBLY (HALDEX) 889-0 DOOR SEAL, DUAL PUMP (HALDEX) 88-0 BOX COVER, DUAL PUMP (HALDEX) 07

DUAL PUMP ASSEMBLY (EQUIPPED WITH STEEL LINES) - Continued 7 8A ( PLACES) 8 7 8 9 0 ( PLACES) ( PLACES) 0 ( PLACES) 9 ( PLACES) 08

ITEM QTY. PART NO. DESCRIPTION 88-0 FITTING, #8 ELBOW (HALDEX) 7 88-0 TUBE ASSEMBLY, PMP-FL DIV (HALDEX) 8 879-0 FILTER HEAD (HALDEX) 8A REF STEEL PLUG 9 REF MAGNET 0 880-0 RESERVOIR/BOX, DUAL PUMP (HALDEX) 879-0 TUBE ASSEMBLY, FILTER-RESERVOIR (HALDEX) 879-0 FILTER (HALDEX) 88-0 FITTING, #8 STRAIGHT (HALDEX) REF LOCK WASHER, / X / X / 8799-0 HINGE PIN (HALDEX) 888-0 FITTING, #8 RUN-TEE, (HALDEX) 7 88-0 TUBE ASSEMBLY, PMP-FLTR D/PMP, (HALDEX) 8 88-0 TUBE ASSEMBLY, PMP-FLTR, (HALDEX) 9 REF / DIA. X. LG. POP RIVET 0 REF SCREW, #0- X 7/8 LG. 09

SINGLE PUMP ASSEMBLY (EQUIPPED WITH STEEL LINES) 9 9 7 0 8 0 7 A 9 0 ( PLACES) ( PLACES) 8 ( PLACES) ( PLACES) 0

ITEM QTY. PART NO. DESCRIPTION 8800-0 HE000 POWER UNIT ASSEMBLY (HALDEX) REF SCREW, / -0 X LG. REF WASHER, 9/ X /8 X / REF STEEL PLUG, 7/ -0 8808-0 FITTING, # STRAIGHT (HALDEX) 8787-0 TUBE ASSEMBLY, MANF-CL LINE (HALDEX) 7 8788-0 TUBE ASSEMBLY, MANF-FL DIV (HALDEX) 8 88-0 FITTING, AIR BRAKE TUBE (HALDEX) 9 REF LOCK WASHER, /8 X / X / 0 REF HEX NUT, /8 - REF GASKET 880-0 BREATHER (HALDEX) 880-0 GROMMET, /8 X 7/8 X / (HALDEX) 880-0 DRAW LATCH (HALDEX) 8809-0 FITTING, # ELBOW SWIVEL (HALDEX) 88-0 FITTING, # BULKHEAD (HALDEX) A REF HEX NUT 7 880-0 SIGHT GLASS (HALDEX) 8 880-0 GROMMET, / X X / (HALDEX) 9 88-0 FITTING, #8 ELBOW SWIVEL (HALDEX) 0 8798-0 GROMMET, / X -/8 X /8 (HALDEX)

SINGLE PUMP ASSEMBLY (EQUIPPED WITH STEEL LINES) - Continued ( PLACES) ( PLACES) ( PLACES) 9 ( PLACES) 7 0 8 ( PLACES) ( PLACES) 8A ( PLACES)

ITEM QTY. PART NO. DESCRIPTION REF SCREW, / -0 X / LG. 8807-0 FITTING, #8 STR. EXTENDED (HALDEX) 879-0 FLOW DIVIDER ASSY (HALDEX) 8797-0 DOOR SEAL, SINGLE PUMP (HALDEX) 8789-0 BOX COVER, SINGLE PUMP (HALDEX) 88-0 FITTING, #8 ELBOW (HALDEX) 7 879-0 TUBE ASSY, PUMP FILTER (HALDEX) 8 879-0 FILTER HEAD (HALDEX) 8A REF STEEL PLUG 9 REF POP RIVET, /8 X -/ LG. 0 8790-0 RESERVOIR, SINGLE PUMP (HALDEX) 879-0 TUBE ASSEMBLY, FILTER-RESERVOIR (HALDEX) 879-0 FILTER (HALDEX) 88-0 FITTING, #8 STRAIGHT (HALDEX) REF LOCK WASHER, / X / X / 8799-0 HINGE PIN (HALDEX) REF SCREW, #0- X 7/8 LG.

PUMP/MOTOR (PUMPS EQUIPPED WITH STEEL LINES) REFER TO MANIFOLD ASSEMBLY (HALDEX) 7B 7C ( PLACES) 7H 7E ( PLACES) 0 7G 7F 7D 7A A B C D E F 7 A 7C 7E 7 7A ( PLACES) 7D ( PLACES) 7B ( PLACES) 8 9

ITEM QTY. PART NO. DESCRIPTION 880-0 DC MOTOR (HALDEX) A 88-0 KIT BRUSH SERVICE (HALDEX) REF ADAPTOR 88-0 CHECK VALVE (HALDEX) 88-0 O-RING, 7/ X 9/ X / (HALDEX) 88-0 O-RING, -/8 X -7/8 X / (HALDEX) REF RETAINING RING 7 REF GC PUMP ASSEMBLY 7A 88-0 SERVICE PUMP (HALDEX) 7B 88-0 O-RING, -/8 X -/ X / (HALDEX) 7C REF SCREW, #8- X / LG. 7D 88-0 O-RING, / X / X / (HALDEX) 7E 88-0 SCREW, / -0 X LG. (HALDEX) 7F REF RETAINING CLIP 7G REF SPRING CLIP 7H REF SCREW, / -0 X /8 LG. 8. IN 88-0 INLET TUBE, / O.D. (HALDEX) 9 887-0 STRAINER (HALDEX) 0 888-0 RETURN TUBE, / O.D. (HALDEX) REF SPACER, 9/ X / X / REF RETAINING RING 889-0 O-RING, / X /8 X / (HALDEX) REF STEEL PLUG, 7/ -0 SAE REF SEAT ASSEMBLY 880-0 RELIEF VALVE KIT (HALDEX) A REF BALL, / DIA. B REF PRIMARY SPRING (HALDEX) C REF BOOSTER SPRING (HALDEX) D REF ADJUSTMENT SCREW E REF GASKET F REF HEX CAP 7 88-0 START SWITCH KIT (HALDEX) 7A REF LOCK WASHER, / X / X / 7B 887-0 FLAT WASHER, / X /8 X / (HALDEX) 7C REF START SWITCH 7D REF SCREW, / -0 X /8 LG. 7E REF LEAD WIRE, # AWG

MANIFOLD ASSEMBLY (PUMPS WITH STEEL LINES, ONLY) 7 7 8 7 0 A 9 B 9 C D E F

ITEM QTY. PART NO. DESCRIPTION REF 880-0 MANIFOLD ASSEMBLY (HALDEX) 88-0 POSITION / WAY VALVE (HALDEX) 88-0 SOLENOID COIL, 0V (HALDEX) 88-0 FITTING, #8 ELBOW (HALDEX) 88-0 CHECK VALVE (HALDEX) REF SCREW, / -0 X -/ LG. 887-0 POSITION / WAY VALVE 7 REF STEEL PLUG, / - SAE 8 888-0 O-RING, / X 7/8 X / (HALDEX) 9 889-0 NEEDLE VALVE (HALDEX) 0 REF SEAT ASSEMBLY 880-0 RELIEF VALVE KIT (HALDEX) A REF BALL B REF SPRING, MAIN C REF SPRING, BOOSTER D REF ADJUSTMENT SCREW E REF GASKET F REF HEX CAP REF MANIFOLD BLOCK 7

HYDRAULIC COMPONENTS (GRAVITY DOWN) B C D 9 A 7 7B 7A 7 PUMP BOX - REFERENCE (DUAL OR SINGLE PUMP GRAVITY DOWN) 0 LEFT CYLINDER B C 0,A D,A RIGHT CYLINDER REFER TO SPRING GUARD MOUNTING 9 8 8 A 7 CONNECTOR (REF) 8 CONNECTOR (REF) CAUTION To prevent damage to hose assembly, item 8, ensure hose is not twisted in the spring guard & flexible cable is not wrapped around hose. Fingertighten each hose connector. Check for twisting. If necessary, rotate hose to remove twists. Do not over-tighten. Torque each connector to 7. lb-ft. CAUTION To prevent leaky face seal connectors, ensure face seal o-rings are in place before connecting hoses and fittings. 8

ITEM QTY. PART NO. DESCRIPTION 907 ELBOW, /8 X / M-M 07 HYDRAULIC LOCK & VALVE A 908 ELBOW STRAIGHT, #8 X # M-M B 0 ELBOW, 90 STRAIGHT, # X / M-M C 7 VALVE PRESSURE COMPENSATED, GPM D 907 STRAIGHT CONNECTOR, #8 X # M-M 7 809-0 RETURN TUBE ASSEMBLY 8 90 AIR BRAKE CONNECTOR 9 808-0 LIFTING TUBE ASSEMBLY 0 90 UNION, #8 M-M 09999-0 TUBING, 08 LG. 90 TEE, /8 09999-0 TUBING, LG. 80-0 CYLINDER, -/ DIA. X -/8 STROKE (BMRA-/-) 80-0 CYLINDER, DIA. X -/8 STROKE (BMRA-/-) A 80 SEAL KIT, CYL. (BMRA-/-) 80 SEAL KIT, CYL. (BMRA-/-) 800-0 U TUBE ASSEMBLY, 98 X 90 ELBOW, BULKHEAD UNION, # M-M 7 908-0 VALVE ASSEMBLY, IMMERSION PROOF, VDC 7A 908-0 COIL, VDC 7B 900 VALVE CARTRIDGE, WP 8 09 HP HOSE, / X LG, # & # FS F-F (SEE CAUTION.) 9

HYDRAULIC COMPONENTS (GRAVITY DOWN) - Continued PUMP BOX - REFERENCE (DUAL OR SINGLE PUMP GRAVITY DOWN) 0 7 7 LEFT CYLINDER 7 7 RIGHT CYLINDER REFER TO SPRING GUARD MOUNTING 8 9B 9,9A 9C 0

ITEM QTY. PART NO. DESCRIPTION 9 0 CLOSING CYLINDER 9A 808 SEAL KIT, CYLINDER 9B 9079 CONNECTOR, # X # M-M 9C 7 BEARING, SELF LUBE 09999-0 TUBING, 8 LG. 0 09999-0 TUBING, 9 LG. 09999-08 TUBING, LG. 80-0 HP HOSE, /8 X LG, #8 FS 80-0 HP HOSE, /8 X 7 LG, #8 FS 80-0 HP HOSE, /8 X 9 LG, #8 FS 80-0 HP HOSE, /8 X LG, #8 FS 80-0 HP HOSE, /8 X 9 LG, #8 FS 80-0 HP HOSE, /8 X LG, #8 FS 80-0 HP HOSE, /8 X LG, #8 FS 80-0 HP HOSE, /8 X 88 LG, #8 FS 80-0 HP HOSE, /8 X 08 LG, #8 FS 9080 UNION, FACE SEAL, #-#, / M-/8 M 907-0 O-RING, # (/ FACE SEAL TUBE-END) 907-0 O-RING, # (/8 FACE SEAL TUBE-END) 7 907-0 O-RING, #8 (/ FACE SEAL TUBE-END) 8 009 BREATHER

ELECTRICAL COMPONENTS SECTION TO VEHICLE WIRING HARNESS NOTE: Connector references are not marked on parts. R P 9 STOP, TURN & TAILLIGHTS STOP, TURN & TAILLIGHTS 9 LH COLUMN LEFT CYLINDER RH COLUMN RIGHT CYLINDER TO VEHICLE WIRING HARNESS P0 P7 P8 R8 7 8 PUMP BOX R P R R ALIGN MARKS ALIGNING ROUND CONNECTORS OPTIONAL BATTERY BOX 0 P P P9 R9 P R

NOTE: MAXON recommends using dielectric grease on all electrical connections. ITEM QTY. PART NO. DESCRIPTION 8-0 MOLDED CABLE, (LH COLUMN) 8-0 MOLDED EXTENSION CABLE, PUMP BOX, 7 LG. 8-0 MOLDED EXTENSION CABLE, PUMP BOX, 7 LG. 8-0 MOLDED EXTENSION CABLE, PUMP BOX, LG. 80-0 MOLDED HARNESS, (RH COLUMN) 900 SWITCH SEAL BOOT, HALF-TOGGLE 8-0 MOLDED SWITCH & CABLE, BMRA 808 INTERCONNECT HARNESS, BMR-A GRAVITY DOWN 808 INTERCONNECT HARNESS, BMR-A POWER DOWN 7 809-0 CABLE ASSEMBLY FLEXIBLE 8 80 CONTROL BOX BMR-A POWER DOWN 80 CONTROL BOX BMR-A GRAVITY DOWN 9 80-0 HARNESS ASSEMBLY, STOP, TURN & TAILLIGHTS (FOR COLUMNS EQUIPPED WITH LIGHTS, ONLY) 0 8-0 CABLE, GA, 7 LG. (ELECTRICAL GROUND)

ELECTRICAL COMPONENTS - DUAL PUMP BOX ( PLACES) ITEM QTY. PART NO. DESCRIPTION 80 SOLENOID HARNESS, GRAVITY DOWN SOLENOID HARNESS, POWER DOWN 79 CIRCUIT BREAKER, 0 AMP TOGGLE SWITCH, POSITION 8-0 CABLE ASSEMBLY GA, 8 LG. 8-0 CABLE ASSEMBLY, GA, 0 LG. 87 SWITCH, MASTER DISCONNECT 7 87 PLATE, SWITCH FACE 8 87- CABLE ASSEMBLY, GA, 7 LG. 8 7 ( PLACES) NOTE: MAXON recommends using dielectric grease on all electrical connections.

ELECTRICAL COMPONENTS - SINGLE PUMP BOX NOTE: MAXON recommends using dielectric grease on all electrical connections. ITEM QTY. PART NO. DESCRIPTION 80 SOLENOID HARNESS, GRAVITY DOWN 80 SOLENOID HARNESS, POWER DOWN 79 CIRCUIT BREAKER, 0 AMP 8-0 CABLE ASSEMBLY, GA, LG. 87 SWITCH, MASTER DISCONNECT 87 PLATE, SWITCH FACE

( PLACES) ELECTRICAL COMPONENTS - DUAL PUMP BOX (EQUIPPED WITH STEEL LINES) 8 0 7 9 NOTE: MAXON recommends using dielectric grease on all electrical connections. ITEM QTY. PART NO. DESCRIPTION REF LEAD WIRE, BLACK 88-0 WIRING HARNESS, D/PUMP G/D (HALDEX) REF LEAD WIRE, RED 888-0 BATTERY DISCONNECT SWITCH (HALDEX) REF SWITCH PLATE REF LEAD WIRE, RED 7 REF LEAD WIRE, BLACK 8 889-0 TOGGLE SWITCH (HALDEX) 9 REF TERMINAL STRAP 0 887-0 CIRCUIT BREAKER, 0 AMP (HALDEX) REF POP RIVET, /8 X /8 LG.

ELECTRICAL COMPONENTS - SINGLE PUMP BOX (EQUIPPED WITH STEEL LINES) 7 ( PLACES) NOTE: MAXON recommends using dielectric grease on all electrical connections. ITEM QTY. PART NO. DESCRIPTION REF LEAD WIRE, BLACK 879-0 WIRING HARNESS, SINGLE PUMP G/D (HALDEX) REF LEAD WIRE, RED 888-0 BATTERY DISCONNECT SWITCH (HALDEX) 887-0 CIRCUIT BREAKER, 0 AMP (HALDEX) REF SWITCH PLATE 7 REF POP RIVET, /8 DIA. X /8 LG. 7

(TO PUMP BOX) ELECTRICAL COMPONENTS - BATTERY BOX VEHICLE BATTERY CHARGE LINE (REF) NOTE: Illustration shows volt batteries connected in series. NOTE: MAXON recommends using dielectric grease on all electrical connections. ITEM QTY. PART NO. DESCRIPTION 87-0 CABLE ASSEMBLY 7 CIRCUIT BREAKER 0 AMP 09 BATTERY, V HEAVY DUTY 87-87- CABLE ASSEMBLY CABLE ASSY (V BATTERIES IN SERIES REQUIRE CABLE. V BATTERIES IN PARALLEL REQUIRE CABLES.) 8