WHEELED EXCAVATORS WX148 I WX168 I WX188
WHEELED EXCAVATORS WX148 I WX168 I WX188 2
Power and Control The WX wheeled excavators are designed to deliver a axiu of productivity and precision. The extra powerful hydraulics are anaged by the Case Intelligent Hydraulic Syste (CIHS) control, which offers a single CPU for iproved controllability and siplifi ed diagnostics. The Case wheeled excavators use a 3-pup hydraulic syste, with one pup dedicated to the slew function. This provides continuous oveent and allows the operator to ulti-function the controls for sooth, productive digging perforance. The Case Intelligent Swing (CIS) allows the operator to adjust upperstructure slew speed to suit a variety of work sites. The new dedicated levelling ode axiises speed, ease and precision in levelling operations. The Autoatic Powerboost function delivers axiu perforance for heavy breakout and lifting operations. The Power Liit Control feature onitors the engine and hydraulic pups to optiise power output. Superior Versatility The fl ow and pressure to the attachents is easy to adjust and up to 12 settings for different attachents can be eorised. 3
WHEELED EXCAVATORS WX148 I WX168 I WX188 4
Powertrain Our WX excavators drive through a fully autoatic hydrostatic powershift transission and heavy duty ZF axles, providing fast travel speeds between working sites and excellent traction. An iproved orbitrol steering syste delivers effortless and precise control. A larger steering angle akes it even easier to ove in confi ned areas. With a creep speed function and high ground clearance, the achines are also capable of tackling the toughest of site conditions. Excellent drawbar pull is a feature of all three achines and the axles have an auto-locking feature for axiu stability when working without stabilisers. Multi-disc wet brakes and axle oil change intervals of 2,000 hours will reduce your custoers ownership and operating costs. Total Stability The new WX design leads to an outstanding stability even on tires only. Our wheeled excavators have always boasted a robust design and sturdy build quality. These new WX odels are no exception, with a strong chassis providing the option of a dozer blade, the dozer blade and stabilisers, or stabilisers front and rear for total balance and a stable working platfor. The dozer blade with parallel kineatics is ade extra-robust in curved design for best aterial retention. 5
WHEELED EXCAVATORS WX148 I WX168 I WX188 6
First-class cofort The inclination of the steering colun is continuously adjustable to fi t the operator s best working position; the controls are individually adjustable to atch their preferences; the adjustable air suspended and heated seat cobined with the ergonoic design of arrests and foot pedals provide the best possible workstation. The tinted safety glass, sun blinds and transparent rain protection above the front window provide cofortable working conditions, while the autoatic air conditioning aintains a cofortable in-cab cliate for ore productive work. A hot and cool box, plenty of storage copartents, a radio with USB support, a icrophone for handsfree conversation, a front aux. port and a 12V auxiliary socket coplete the operator s cofortable workstation. Easy to operate The controls layout is designed to iniise fatigue, with all travel functions and switches easily accessible and grouped on the steering colun. The achine s inforation is easy to access and understand on the in-cab onitor, so the operator can focus on the job. A new engine speed and working ode selection dial akes it easy for the operator to set the achine up in any working situation. The dial delivers low idle speed, two lifting odes, an Eco working ode and three general work odes. It also provides access to the Heavy Mode for axiu digging perforance. The new levelling ode can be easily activated in Eco or Heavy ode by siply pressing a switch on the right hand joystick. The blade and each of the stabilizers are proportionally operated. Each of the stabilizers can be easily activated by switches. All-round visibility Large glazed surfaces, safety tinted glass, one-piece right-hand side window and large roof window provide superior visibility all around. Standard working lights on the boo and cab front add to the excellent visibility. The optional rear view caera further enhances visibility to the rear. 7
WHEELED EXCAVATORS WX148 I WX168 I WX188 Safety Safe Attachent Operation Boo cylinders feature safety valves as standard. For added safety, a coplete object handling kit (safety valves on dipper, loading hook, overload warning) and a heavy-duty holder for grabs are available as options. ROPS/FOPS cab The reinforced structure of the cab is ROPS and FOPS certifi ed. 8
Easy aintenance Big and wide-opening hoods provide easy access to all service points. Maintenance operations are quick and easy with the grouped, easily accessible greasing points, and easy to reach fi lters at the rear of the achine. The extended greasing intervals for the attachent (up to 500 hours) axiise uptie and lower operating costs. 9
WHEELED EXCAVATORS WX148 I WX168 I WX188 10
11
WHEELED EXCAVATORS WX148 Specifications WX148 Engine Net engine power (ISO 14396/ECE R120) 90 kw / 121 hp Rated 2000 rp Make and odel F4GE9484D J601 Type Water-cooled, direct injection type diesel engine with intercooler turbo-charger Displaceent 4.5 l Nuber of cylinders 4 Bore x stroke 104 x 132 Maxiu torque at 1200 rp 525 N Electrical syste Voltage 24 V Batteries 2 x 12 V Battery rating (each) 100 Ah Alternator 70 A Starter otor 4 kw Transission k/h k/h Max Road travel speed 20 35 Max Field travel speed 5 8 Creep speed 2.5 2.5 Maxiu drawbar pull (fi eld) 92 kn Power Shift ulti-disc gearbox shiftable under load. Autoatic or anual gear shift control. Travel ode autoatically engaged by pressing accelerator pedal. Hydraulic syste 2 x Priary pups 3 variable displaceent, axial piston Total axiu fl ow 352 l/in (2 x 140 + 72) Auxiliary low fl ow, optional (on/off) 22 l/in Auxiliary ediu fl ow, optional (proportional) 80 l/in Ipleent /travel pressure 340/370 bar Power Boost 370 bar Swing circuit pressure 360/390 bar Pilot pup 45 bar Boo cylinder ono 100 x 1028 Boo cylinder 2-piece boo 100 x 972 Ar cylinder 115 x 1120 Bucket cylinder 95 x 903 Positioning cylinder 135 x 645 Cylinder end stroke daping. Electrohydraulic servo-control. Three-pup hydraulics with two ain pups and separate swing pup. 8 selectable power stages with peranent Power Boost in lift stages: Low idle, Lift 1, Lift 2, Eco 1, Eco 2, Eco 3, Heavy, Roadtravel Levelling ode for sooth operation. Adjustable swing acceleration (power) and deceleration (brake) Autoatic power increase in the drive ode. Swing drive Swing speed 9 rp Swing torque (SAE J1371) 36 kn The swing function is operated by a hydraulic closed circuit coupled with a echanical reducer integrating an autoatic static brake. The hydro-static swing brake is adjustable in 3 settings. Brakes Service brakes: play free, oil bath ulti disc type integrated in all four wheel hubs. Work brake: acts on service brakes and locks front axle oscillation. Parking brake: spring type echanical acting on the transission. Eergency brake: double braking circuit and autoatic parking and brake actuation with the engine shut down. Steering Type ORBITROL with safety valve Pup gear type Steering cylinder double effect, integrated in axle Tyres Twin tyres 10.00-20/80-22.5 Single tyres 18R 19.5, 600/40-22.5 Tyre availability can be liited by local hoologation. Capacities Engine oil 12,5 l Cooling syste 22 l Fuel tank 190 l Hydraulic syste (incl. tank) 200 l for ono 210 l for triple articulation 12
General diensions equipped with twin tires 10.00-20 2130 A B 3185 2550 1080 250 1175 985 355 1925 2550 2550 3185 250 1030 1080 1925 2550 TRIPLE ARTICULATION MONOBOOM Operating weight 2,55 axle width include bucket 480 kg and quick coupler 250 kg (with 10.00-20) Ar 2.10 Ar 2.45 Ar 2.95 Ar 2.10 Ar 2.45 Ar 2.95 A 2620 2710 3050 2890 3115 3605 B with rear blade 8075 8085 8055 7850 7880 7895 B with rear stabilizers 8240 8250 8220 8015 8045 8065 TRIPLE ARTICULATION MONOBOOM Ar 2.10 Ar 2.45 Ar 2.95 Ar 2.10 Ar 2.45 Ar 2.95 Rear blade 15450 kg 15550 kg 15600 kg 15100 kg 15200 kg 15250 kg Stabilizers 15750 kg 15800 kg 15850 kg 15400 kg 15500 kg 15550 kg Blade and stabilizers 16300 kg 16350 kg 16400 kg 16000 kg 16050 kg 16100 kg 13
Perforance data TRIPLE ARTICULATION MONOBOOM G E G E D D F F H H C C C C B A B A TRIPLE ARTICULATION MONOBOOM Ar 2.10 Ar 2.45 Ar 2.95 Ar 2.10 Ar 2.45 Ar 2.95 A Max. digging reach 8400 8800 9300 8200 8500 9000 B Max. digging reach at ground level 8300 8600 9100 8000 8300 8800 C Max. digging depth 4900 5200 5700 4900 5300 5800 C Max. depth of cut for 8 level botto 4800 5100 5600 4700 5100 5600 D Max. digging height 9600 9900 10300 8600 8800 9200 E Min. front swing radius 2450 2600 3000 2750 2800 3050 F Max. loading height 7100 7400 7900 6200 6400 6800 G Front swing radius at ax height 2390 2580 2810 3755 4025 4390 H Max. loading height (ar retracted) 3500 3200 2900 2900 2600 2100 Digging force - ISO Ar digging force - with auto power boost Bucket digging force - with auto power boost Ar 2.10 Ar 2.45 Ar 2.95 74.3 kn 66.9 kn 59.5 kn 80.9 kn 72.9 kn 64.8 kn 91.3 kn 91.3 kn 91.3 kn 99.5 kn 99.5 kn 99.5 kn 14
Lifting capacity Mono boo - dipperstick 2.10 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 3.5* 3.5* 4.0* 3.8 2.9* 2.8 4.4* 3.7 3.6 2.4 2.7* 2.2 5.3* 3.5 3.5 2.3 2.8* 1.9 5.1 3.2 3.4 2.2 2.8 1.8 5.9* 5.0 3.1 3.3 2.1 2.9 1.8 8.2* 5.5 5.0 3.1 3.3 2.1 3.3 2.1 * 4.3* 3.2 3.6* 2.8 3.7 4.9 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 3.5* 3.5* 4.0* 4.0* 2.9* 2.9* 4.4* 4.2 3.9* 2.7 2.7* 2.4 5.3* 3.9 4.2* 2.6 2.8* 2.1 6.0* 3.7 4.5* 2.5 3.0* 2.0 5.9* 5.9* 6.2* 3.6 4.5* 2.4 3.5* 2.1 8.2* 6.5 5.8* 3.5 4.0* 2.4 3.9* 2.4 * * 4.3* 3.6 3.6* 3.2 3.7 4.9 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 3.5* 3.5* 4.0* 4.0* 2.9* 2.9* 4.4* 4.4* 3.9* 3.9* 2.7* 2.7* 5.3* 5.3* 4.2* 4.1 2.8* 2.8* 6.0* 6.0* 4.5* 4.0 3.0* 3.0* 5.9* 5.9* 6.2* 5.9 4.5* 3.9 3.5* 3.3 8.2* 8.2* 5.8* 5.8* 4.0* 3.9 3.9* 3.8 * * 4.3* 4.3* 3.6* 3.6* 3.7 4.9 Mono boo - dipperstick 2.45 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 2.8* 2.8* 3.7* 3.7* 2.4* 2.4* 4.1* 3.7 3.6 2.4 2.3* 2.0 * 5.0* 3.5 3.5 2.3 2.3* 1.7 5.2 3.2 3.4 2.2 2.4* 1.6 6.2* 5.0 3.0 3.3 2.1 2.6 1.7 8.6* 4.9 3.0 3.3 2.1 3.0 1.9 * 5.5 4.7* 3.1 3.6* 2.4 4.3 5.9 6.5 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 2.8* 2.8* 3.7* 3.7* 2.4* 2.4* 4.1* 4.1* 3.7* 2.7 2.3* 2.2 * 5.0* 4.0 4.0* 2.6 2.3* 2.0 5.8* 3.7 4.3* 2.5 2.4* 1.9 6.2* 6.2* 6.2* 3.5 4.5* 2.4 2.8* 1.9 8.6* 5.9* 3.5 4.2* 2.4 3.5* 2.2 * 6.5 4.7* 3.5 3.6* 2.8 4.3 5.9 6.5 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 2,8* 2,8* 3,7* 3,7* 2,4* 2,4* 4,1* 4,1* 3,7* 3,7* 2,3* 2,3* 7,6* 7,6* 5,0* 5,0* 4,0* 4,0* 2,3* 2,3* 5,8* 5,8* 4,3* 3,9 2,4* 2,4* 6,2* 6,2* 6,2* 5,9 4,5* 3,9 2,8* 2,8* 8,6* 8,6* 5,9* 5,8 4,2* 3,8 3,5* 3,5 6,7* 6,7* 4,7* 4,7* 3,6* 3,6* 4.3 5.9 6.5 Mono boo - dipperstick 2.95 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 2.3* 2.3* 3.0* 2.5 2.0* 2.0* 3.6* 3.6* 3.3* 2.4 1.9* 1.7 6.5* 6.5 4.5* 3.5 3.5 2.3 2.5 1.6 1.9* 1.5 5.2 3.2 3.4 2.2 2.4 1.5 2.1* 1.5 * 5.3 4.9 3.0 3.3 2.1 2.4 1.5 2.3* 1.5 9.0* 5.3 4.9 2.9 3.2 2.0 2.6 1.6 * 4.9 3.0 3.3 2.0 3.2 2.0 5.1 6.5 6.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 2.3* 2.3* 3.0* 2.8 2.0* 2.0* 3.6* 3.6* 3.3* 2.7 1.9* 1.9* 6.5* 6.5* 4.5* 4.0 3.7* 2.6 2.6* 1.8 1.9* 1.8 5.5* 3.7 4.1* 2.5 3.2* 1.8 2.1* 1.7 * 6.0* 3.5 4.4* 2.4 2.7* 1.7 2.3* 1.7 9.0* 6.0* 3.4 4.3* 2.3 2.8* 1.9 * 5.1* 3.4 3.4* 2.4 3.4* 2.3 5.1 6.5 6.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 2.3* 2.3* 3.0* 3.0* 2.0* 2.0* 3.6* 3.6* 3.3* 3.3* 1.9* 1.9* 6.5* 6.5* 4.5* 4.5* 3.7* 3.7* 2.6* 2.6* 1.9* 1.9* 5.5* 5.5* 4.1* 3.9 3.2* 2.8 2.1* 2.1* * * 6.0* 5.9 4.4* 3.8 2.7* 2.7* 2.3* 2.3* 9.0* 9.0* 6.0* 5.8 4.3* 3.8 2.8* 2.8* * * 5.1* 5.1* 3.4* 3.4* 3.4* 3.4* 5.1 6.5 6.0 All the lift capacity values are in tonnes and without bucket. As per ISO 10567 the indicated load is no ore than 87% of hydraulic syste lifting capacity or 75% of static tipping load. Values arked with an asterisk are liited by the hydraulic syste. 15
16 Lifting capacity Triple articulation - dipperstick 2.10 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 4.1* 4.1* 4.5* 3.8 3.3* 2.5 6.6* 6.6* 4.9* 3.8 3.7 2.4 3.0 2.0 * * 3.7 3.6* 2.4 2.7 1.7 8.7* 5.3 3.7 3.6 2.3 2.6 1.7 9.8* * 3.6 3.4 2.2 2.7 1.7 10.1* 5.3 3.3 3.4 2.1 3.0 1.9 9.4* 5.9 4.8* 3.2 4.2* 3.0 3.0 4.5 6.0 4.1* 4.1* 4.5* 4.5* 3.3* 3.3* 6.6* 6.6* 4.9* 4.9* 4.1* 4.1* 3.1* 3.1* * * * * 4.3* 4.1 3.1* 3.1 8.7* 8.7* * 6.0 4.5* 4.1 3.3* 3.0 9.8* 9.8* 6.2* * 4.5* 4.0 3.5* 3.1 10.1* 10.1* * 6.2 4.1* 3.9 3.2* 3.2* 9.4* 9.4* 4.8* 4.8* 4.2* 4.2* Triple articulation - dipperstick 2.45 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 Triple articulation - dipperstick 2.95 +9.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +9.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 4.2 5.8 4.8 4.2 5.8 4.8 3.9* 3.8 3.3* 3.3* 4.2* 3.9 3.5* 2.4 2.8* 2.2 4.8* 4.8* 4.6* 3.8 3.6 2.5 2.6* 1.8 * 5.3* 3.7 3.6 2.4 2.5 1.6 8.6* 5.3 3.6 3.6 2.4 2.4 1.5 2.4 1.5 9.6* 5.3 3.6 3.5 2.2 2.5 1.6 10.0* 5.3 3.3 3.3 2.1 2.8 1.7 10.1* 6.0 5.1 3.2 3.5* 2.4 3.0 4.5 6.0 3.9* 3.9* 3.3* 3.3* 4.2* 4.2* 3.5* 3.5* 2.8* 2.8* 4.8* 4.8* 4.6* 4.6* 3.9* 3.9* 2.6* 2.6* * * 5.3* 5.3* 4.1* 4.1 2.6* 2.6* 8.6* 8.6* 6.0* 6.0* 4.4* 4.0 3.2* 2.8 2.7* 2.7* 9.6* 9.6* * 6.0* 4.4* 4.0 3.0* 2.9 10.0* 10.0* 6.2* 6.2 4.4* 3.9 3.1* 3.1* 10.1* 10.1* * * 3.5* 3.5* 3.0 4.5 6.0 4.1* 4.1* 4.0* 4.0* 3.8* 3.8* 2.7* 2.7* 3.6* 3.6* 3.5* 2.5 2.3* 1.9 3.9* 3.8 3.6* 2.5 2.4* 1.6 2.2* 1.6 * * 5.0* 3.7* 3.6 2.5 2.5 1.6 2.2* 1.4 8.2* 6.2 5.2 3.5 3.5* 2.4 2.5 1.6 2.2 1.4 9.2* 6.2 5.2 3.6 3.5 2.3 2.4 1.5 2.2 1.4 9.7* 3.4 3.4 2.1 2.4 1.5 10.3* 6.0 5.2 3.2 3.3 2.0 2.9* 1.9 3.0 4.5 6.0 4.1* 4.1* 4.0* 4.0* 3.8* 3.8* 2.7* 2.7* 3.6* 3.6* 3.5* 3.5* 2.3* 2.3* 3.9* 3.9* 3.6* 3.6* 2.4* 2.4* 2.2* 2.2* * * 5.0* 5.0* 3.9* 3.9* 3.3* 2.9 2.2* 2.2* 8.2* 8.2* 5.7* 5.7* 4.2* 4.0* 3.4* 2.9 2.3* 2.3* 9.2* 9.2* 6.0* 5.9 4.3* 4.0 3.3* 2.8 2.5* 2.5* 9.7* 9.7* * 6.0* 4.5* 3.9 2.9* 2.9 10.3* 10.3* 6.2* 3.4* 3.4* 2.9* 2.9* 4.7 6.2 4.7 6.2 3.1 5.5 8.1 3.1 5.5 8.1 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +9.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 4.1* 4.1 4.5* 4.3 3.3* 2.8 6.6* 6.6* 4.9* 4.2 4.1* 2.7 3.1* 2.2 * * 4.1 4.3* 2.7 3.1* 2.0 8.7* * * 4.1 4.5* 2.6 3.3* 1.9 9.8* 6.2* 4.1 4.5* 2.5 3.5* 2.0 10.1* * 3.8 4.1* 2.4 3.2* 2.2 9.4* 4.8* 3.7 4.2* 3.4 3.0 4.5 6.0 4.2 5.8 4.8 3.9* 3.9* 3.3* 3.3* 4.2* 4.2* 3.5* 2.7 2.8* 2.5 4.8* 4.8* 4.6* 4.2 3.9* 2.8 2.6* 2.0 * 5.3* 4.1 4.1* 2.8 2.6* 1.8 8.6* 6.0* 4.0 4.4* 2.7 3.2* 1.8 2.7* 1.7 9.6* * 4.1 4.4* 2.5 3.0* 1.8 10.0* 6.2* 3.8 4.4* 2.4 3.1* 2.0 10.1* * 3.7 3.5* 2.8 3.0 4.5 6.0 4.1* 4.1* 4.0* 4.0* 3.8* 3.8* 2.7* 2.7* 3.6* 3.6* 3.5* 2.8 2.3* 2.2 3.9* 3.9* 3.6* 2.8 2.4* 1.8 2.2* 1.8 * * 5.0* 4.1 3.9* 2.7 3.3* 1.8 2.2* 1.6 8.2* 5.7* 4.0 4.2* 2.7 3.4* 1.8 2.3* 1.6 9.2* 6.0* 4.0 4.3* 2.6 3.3* 1.7 2.5* 1.6 9.7* * 3.9 4.5* 2.4 2.9* 1.8 10.3* 6.2* 3.7 3.4* 2.4 2.9* 2.2 All the lift capacity values are in tonnes and without bucket. As per ISO 10567 the indicated load is no ore than 87% of hydraulic syste lifting capacity or 75% of static tipping load. Values arked with an asterisk are liited by the hydraulic syste. 4.7 6.2 3.1 5.5 8.1
WHEELED EXCAVATORS WX168 17
WHEELED EXCAVATORS WX168 Specifications WX168 Engine Net engine power (ISO 14396/ECE R120) 105 kw / 141 hp Rated 2000 rp Make and odel F4GE9684F J602 Type Water-cooled, 6 cylinder direct injection type diesel engine with intercooler turbo-charger Displaceent l Nuber of cylinders 6 Bore x stroke 104 x 132 Maxiu torque at 1200 rp 575 N Electrical syste Voltage 24 V Batteries 2 x 12 V Battery rating (each) 100 Ah Alternator 70 A Starter otor 4 kw Transission k/h k/h Max Road travel speed 20 35 Max Field travel speed 5 8 Creep speed 2.5 2.5 Maxiu drawbar pull (fi eld) 92 kn Power Shift ulti-disc gearbox shiftable under load. Autoatic or anual gear shift control. Travel ode autoatically engaged by pressing accelerator pedal. Hydraulic syste 2 x Priary pups 3 variable displaceent, axial piston Total axiu fl ow 360 l/in (2 x 144 + 72) Auxiliary low fl ow, optional (on/off) 22 l/in Auxiliary ediu fl ow, optional (proportional) 80 l/in Ipleent /travel pressure 340/370 bar Power Boost 370 bar Swing circuit pressure 370/390 bar Pilot pup 45 bar Boo cylinder ono 110 x 1170 Boo cylinder 2-piece boo 110 x 1020 Ar cylinder 115 x 1290 Bucket cylinder 100 x 1025 Positioning cylinder 155 x 745 Cylinder end stroke daping. Electrohydraulic servo-control. Three-pup hydraulics with two ain pups and separate swing pup. 8 selectable power stages with peranent Power Boost in lift stages: Low idle, Lift 1, Lift 2, Eco 1, Eco 2, Eco 3, Heavy, Roadtravel Levelling ode for sooth operation. Adjustable swing acceleration (power) and deceleration (brake) Autoatic power increase in the drive ode. Swing drive Swing speed 8,6 rp Swing torque (SAE J1371) 42,4 kn The swing function is operated by a hydraulic closed circuit coupled with a echanical reducer integrating an autoatic static brake. The hydro-static swing brake is adjustable in 3 settings. Brakes Service brakes: play free, oil bath ulti disc type integrated in all four wheel hubs. Work brake: acts on service brakes and locks front axle oscillation. Parking brake: spring type echanical acting on the transission. Eergency brake: double braking circuit and autoatic parking and brake actuation with the engine shut down. Steering Type ORBITROL with safety valve Pup gear type Steering cylinder double effect, integrated in axle Tyres Twin tyres 10.00-20/80-22.5 Single tyres 18R 19.5, 600/40-22.5 Tyre availability can be liited by local hoologation. Capacities Engine oil 15 l Cooling syste 22 l Fuel tank 274 l Hydraulic syste (incl. tank) 215 l for ono 230 l for triple articulation 18
General diensions equipped with twin tires 10.00-20 2260 A B 3181 355 250 1175 985 1030 1080 1925 2550 2550 3181 250 1160 1080 1925 2550 TRIPLE ARTICULATION MONOBOOM Operating weight 2,55 axle width include bucket 480 kg and quick coupler 250 kg (with 10.00-20) Ar 2.20 Ar 2.60 Ar 3.10 Ar 2.20 Ar 2.60 Ar 3.10 A 2870 2825 3315 3110 3075 3730 B with rear blade 8670 8600 8585 8635 8575 8575 B with rear stabilizers 8730 8660 8645 8695 8635 8635 TRIPLE ARTICULATION MONOBOOM Ar 2.20 Ar 2.60 Ar 3.10 Ar 2.20 Ar 2.60 Ar 3.10 Rear blade 17100 kg 17150 kg 17220 kg 16950 kg 17000 kg 17070 kg Stabilizers 17400 kg 17450 kg 17520 kg 17250 kg 17300 kg 17370 kg Blade and stabilizers 18000 kg 18050 kg 18120 kg 17850 kg 17900 kg 17970 kg Stabilizers rear and front 18400 kg 18450 kg 18520 kg 18250 kg 18300 kg 18370 kg 19
Perforance data TRIPLE ARTICULATION MONOBOOM G E G E D D F F H H C C C C A B B A TRIPLE ARTICULATION MONOBOOM Ar 2.20 Ar 2.60 Ar 3.10 Ar 2.20 Ar 2.60 Ar 3.10 A Max. digging reach 8950 9290 9780 8840 9150 9630 B Max. digging reach at ground level 8730 9080 9580 8620 8940 9430 C Max. digging depth 4910 5290 5790 4940 5330 5840 C Max. depth of cut for 8 level botto 4800 5180 5690 4710 5120 5660 D Max. digging height 9970 10190 10580 8900 8980 9270 E Min. front swing radius 3060 2810 2870 3340 2950 2860 F Max. loading height 7220 7450 7840 6280 6370 6650 G Front swing radius at ax height 3060 3400 3710 4540 4930 4540 H Max. loading height (ar retracted) 3660 3130 2630 3070 2640 2140 Digging force - ISO Ar digging force - with auto power boost Bucket digging force - with auto power boost Ar 2.20 Ar 2.60 Ar 3.10 83 kn 70 kn 61 kn 90 kn 76 kn 67 kn 113 kn 113 kn 113 kn 123 kn 123 kn 123 kn 20
Lifting capacity Mono boo - dipperstick 2.20 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 4.6* 4.1 4.1 2.7 4.0 2.6 4.1 4.0 2.6 3.2 2.1 5.9 3.7 3.9 2.5 2.8 1.8 3.4 3.7 2.3 2.7 1.7 3.3 3.6 2.2 2.8 1.8 9.3* 6.0 3.3 3.6 2.2 3.2 2.0 9.1* 6.2 5.5 3.4 4.1 2.6 4.7 6.6 5.5 3.0 4.5 6.0 3.0 4.5 6.0 4.6* 4.6* 4.7 4.6* 4.6* 4.7* 4.7* 4.2* 4.2* +6.0 4.7* 4.7* 4.2* 4.2* 6.6* 6.6* 5.5* 4.6 4.1* 3.7 +4.5 6.6* 6.6* 5.5* 5.5* 4.1* 4.1* * 6.9 * 4.5 4.3* 3.3 +3.0 * * * 5.5 4.3* 4.0 9.1* 6.5 6.6* 4.3 4.7* 3.1 +1.5 9.1* 6.6* 5.3 4.7* 3.9 9.3* * 4.2 * 3.3 0 9.3* 8.1 * 5.2 * 4.0 9.3* 9.3* 8.6* * 4.2 5.5* 3.7 6.6-1.5 9.3* 9.3* 8.6* 8.1 * 5.2 5.5* 4.5 9.1* 9.1* * 6.5 5.2* 4.8 5.5-3.0 9.1* 9.1* * * 5.2* 5.2* Mono boo - dipperstick 2.60 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 Mono boo - dipperstick 3.10 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0-4.5 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0-4.5 3.0 4.5 6.0 3.3* 3.3* 4.1* 2.8 3.0* 2.4 * 4.2 4.1 2.7 3.0* 1.9 6.0 3.8 3.9 2.5 2.8 1.8 2.7 1.7 3.5 3.7 2.4 2.7 1.7 2.6 1.6 5.0* 5.0* 3.3 3.6 2.2 2.6 1.7 2.6 1.6 8.7* 5.9 3.2 3.6 2.2 2.9 1.8 10.2* 5.5 3.3 3.7 2.3 5.2 6.5 6.0 5.9 8.2 6.6 4.6 5.9 8.2 6.6 4.6 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 4.6* 4.6 4.7* 3.1 4.2* 3.0 6.6* 4.7 5.5* 3.0 4.1* 2.4 * 4.3 * 2.8 4.3* 2.1 9.1* 3.9 6.2 2.7 4.4 2.0 9.3* 3.8 2.6 4.6 2.0 9.3* 8.6* 3.8 2.6 5.3 2.3 9.1* * 3.9 5.2* 3.0 3.0 4.5 6.0 3.0 4.5 6.0 3.3* 3.3* 5.2 4.1* 4.1* 3.0* 3.0* 6.5 +6.0 * * 5.2* 4.7 3.0* 3.0* +4.5 * 5.8* 4.5 3.9* 3.2 3.1* 3.1 +3.0 8.8* 6.6 * 4.3 4.8* 3.1 3.4* 3.0 +1.5 5.0* 5.0* 9.3* * 4.2 4.3* 3.1 3.9* 3.0 0 8.7* 8.7* 8.8* 6.5* 4.1 5.0* 3.4-1.5 10.2* 10.2* * 5.2* 4.3 6.0-3.0 3.0 4.5 6.0 2.4* 2.4* 3.7* 2.8 2.2* 2.1 4.1 2.7 2.8 1.8 2.2* 1.7 10.9* 3.9 3.9 2.5 2.8 1.8 2.3* 1.5 5.7 3.5 3.7 2.3 2.7 1.7 2.3 1.4 5.2* 5.2* 3.2 3.6 2.2 2.6 1.6 2.3 1.5 * 5.7 5.3 3.2 3.5 2.1 2.6 1.6 2.6 1.6 10.7 5.9 5.3 3.2 3.5 2.2 3.1 1.9 * 3.4 5.2* 3.2 3.0 4.5 6.0 2.4* 2.4* 3.7* 3.7* 2.2* 2.2* 4.4* 4.4* 3.0* 3.0* 2.2* 2.2* 10.9* 10.9* 6.9* 6.9* 5.5* 4.5 4.0* 3.2 2.3* 2.3* * 6.6 * 4.3 5.0* 3.1 2.5* 2.5* 5.2* 5.2* 9.1* 6.6* 4.1 5.1* 3.0 2.8* 2.7 * * 9.0* 6.5* 4.1 3.5* 3.0 3.5* 3.0 11.4* 11.4* * 5.7* 4.1 4.9* 3.6 * * 5.2* 5.2* All the lift capacity values are in tonnes and without bucket. As per ISO 10567 the indicated load is no ore than 87% of hydraulic syste lifting capacity or 75% of static tipping load. Values arked with an asterisk are liited by the hydraulic syste. +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0-4.5 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0-4.5 3.0 4.5 6.0 4.7 6.6 5.5 4.7 6.6 5.5 3.3* 3.3* 4.1* 3.1 3.0* 2.7 * 4.8 5.2* 3.0 3.0* 2.2 * 4.4 5.8* 2.9 3.9* 2.0 3.1* 1.9 8.8* 4.0 6.2 2.7 4.4 2.0 3.4* 1.9 5.0* 5.0* 9.3* 3.8 2.6 4.3* 1.9 3.9* 1.9 8.7* 8.8* 3.8 2.5 4.8 2.1 10.2* * 3.8 5.2* 2.6 3.3* 3.3* 4.1* 4.1* 3.0* 3.0* * * 5.2* 5.2* 3.0* 3.0* * * 5.8* 5.5 3.9* 3.9 3.1* 3.1* 8.8* * 5.3 4.8* 3.8 3.4* 3.4* 5.0* 5.0* 9.3* 8.1 * 5.2 4.3* 3.8 3.9* 3.7 8.7* 8.7* 8.8* 8.1 6.5* 5.1 5.0* 4.2 10.2* 10.2* * * 5.2* 5.2* 3.0 4.5 6.0 2.4* 2.4* 3.7* 3.2 2.2* 2.2* 4.4* 3.1 3.0* 2.1 2.2* 1.9 10.9* 8.2 6.9* 4.4 5.5* 2.9 4.0* 2.0 2.3* 1.7 * 4.0 * 2.7 4.4 1.9 2.5* 1.7 5.2* 5.2* 9.1* 3.8 2.5 4.3 1.9 2.8* 1.7 * 9.0* 3.7 6.0 2.5 3.5* 1.8 3.5* 1.8 11.4* * 3.7 5.7* 2.5 4.9* 2.2 * 3.9 5.2* 3.8 3.0 4.5 6.0 2.4* 2.4* 3.7* 3.7* 2.2* 2.2* 4.4* 4.4* 3.0* 3.0* 2.2* 2.2* 10.9* 10.9* 6.9* 6.9* 5.5* 5.5* 4.0* 3.9 2.3* 2.3* * * 5.3 5.0* 3.8 2.5* 2.5* 5.2* 5.2* 9.1* 8.1 6.6* 5.1 5.1* 3.7 2.8* 2.8* * * 9.0* 6.5* 5.1 3.5* 3.5* 3.5* 3.5* 11.4* 11.4* * * 5.7* 5.1 4.9* 4.5 * * 5.2* 5.2* 5.2 6.5 6.0 5.2 6.5 6.0 5.9 8.2 6.6 4.6 5.9 8.2 6.6 4.6
Lifting capacity Triple articulation - dipperstick 2.20 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 Triple articulation - dipperstick 2.60 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 5.8* 4.1 5.1* 3.5 5.7* 4.2 3.9 2.5 3.6 2.3 * 4.0 4.0 2.6 2.9 1.8 * 6.9 5.9 3.9 3.9* 2.6 2.6 1.6 10.4* 5.8 3.9 3.8 2.4 2.5 1.5 2.5 1.5 11.1 6.6 5.9 3.7 3.6 2.3 2.5 1.5 11.2 3.4 3.5 2.1 2.9 1.8 11.0 5.3 3.2 4.9 2.9 3.0 4.5 6.0 5.8* 5.8* 5.1* 5.1* 5.7* 5.7* 5.2* 4.5 4.4* 4.1 * * 6.5* 6.5* * 4.5 4.3* 3.3 * * * 5.9* 4.4* 4.3* 3.0 10.4* 10.4* 8.8* 6.6 * 4.4 5.2* 2.9 4.6* 2.9 13.0* 13.0* 9.1* 6.6* 4.2 5.2* 3.0 14.9* 13.6 9.3* 6.6 * 4.0 * 3.4 1* 13.4 8.9* 8.1* 5.7 3.0 4.5 6.0 4.7* 4.2 3.6* 3.0 4.8* 4.2 4.0 2.6 3.2* 2.1 5.9* 5.9* 5.9* 4.0 4.0 2.7 2.7 1.7 9.9* 5.9* 3.9 3.9 2.6 2.6 1.6 2.4 1.5 10.2* 5.8 3.8 3.9 2.5 2.5 1.6 2.3 1.4 11.1* 5.8 3.7 3.7 2.3 2.4 1.5 2.4 1.4 11.3 5.7 3.5 3.5 2.1 2.6 1.6 11.0 6.2 5.3 3.2 3.8 2.3 3.0 4.5 6.0 4.7* 4.7* 3.6* 3.6* 4.8* 4.8* 4.5* 4.5* 3.2* 3.2* 5.9* 5.9* 5.9* 5.9* 5.1* 4.5 3.1* 3.1 9.9* 9.9* * 5.7* 4.4 4.5* 3.0 3.2* 2.8 10.2* 10.2* 8.6* 6.6 6.2* 4.4 5.1* 3.0 3.4* 2.7 12.6* 12.6* 9.1* 6.6 6.6* 4.3 5.1* 2.9 3.8* 2.8 14.7* 13.3 9.2* * 4.1 4.7* 3.1 15.3* 13.5 9.4* * 4.5 Triple articulation - dipperstick 3.10 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0-4.5 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0-4.5 3.0 4.5 6.0 3.5* 3.5* 2.9* 2.6 2.7* 2.5 3.8* 2.7 2.4* 1.8 4.3* 4.1 3.9 2.7 2.7 1.7 2.4* 1.5 10.0* 5.9 3.9 3.9 2.6 2.7 1.7 2.1 1.3 10.3* 5.7 3.8 3.8 2.6 2.6 1.6 2.1 1.2 10.8 5.7 3.8 3.8 2.4 2.5 1.5 2.1 1.2 11.1 5.7 3.5 3.5 2.2 2.4 1.4 2.3 1.3 11.1 6.2 3.2 3.4 2.0 3.0 1.8 3.0 4.5 6.0 3.5* 3.5* 2.9* 2.9* 2.7* 2.7* 3.8* 3.8* 2.4* 2.4* 4.3* 4.3* 4.3* 4.3* 3.4* 3.1 2.4* 2.4* 10.0* 10.0* * 5.3* 4.4* 4.3* 3.1 2.4* 2.4* 10.3* 10.3* 8.1* 6.5 6.0* 4.3 4.9* 3.0 2.5* 2.4 11.8* 11.8* 8.9* 6.5 * 4.4 5.0* 2.9 2.8* 2.5 14.0* 13.1 9.0* 6.5* 4.1 4.4* 2.8 3.4* 2.7 14.9* 13.5 9.3* * 3.9 5.1* 3.6 All the lift capacity values are in tonnes and without bucket. As per ISO 10567 the indicated load is no ore than 87% of hydraulic syste lifting capacity or 75% of static tipping load. Values arked with an asterisk are liited by the hydraulic syste. 4.9 4.8 4.9 4.8 5.5 5.5 4.1 8.2 4.1 8.2 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 5.8* 4.7 5.1* 4.0 5.7* 4.7 5.2* 2.9 4.4* 2.6 * * 6.5* 4.6 * 2.9 4.3* 2.1 * * 4.4 5.9* 2.9 4.3 1.8 10.4* 8.8* 4.4 6.0* 2.8 4.2 1.8 4.1 1.7 13.0* 9.1* 4.3 * 2.6 4.3 1.8 14.9* 9.3* 3.9 5.9 2.4 5.0 2.0 1* 8.9* 3.7 8.1* 3.4 3.0 4.5 6.0 5.8* 5.8* 5.1* 5.1* 5.7* 5.7* 5.2* 5.2* 4.4* 4.4* * * 6.5* 6.5* * * 4.3* 4.1 * * * * 5.9* 5.3* 4.3* 3.7 10.4* 10.4* 8.8* * 5.3 5.2* 3.6 4.6* 3.6 13.0* 13.0* 9.1* 8.1 6.6* 5.2 5.2* 3.7 14.9* 14.9* 9.3* * 5.0 * 4.2 1* 1* 8.9* 8.1* 3.0 4.5 6.0 4.7* 4.7* 3.6* 3.5 4.8* 4.8* 4.5* 3.0 3.2* 2.4 5.9* 5.9* 5.9* 4.6 5.1* 3.0 3.1* 1.9 9.9* * 4.4 5.7* 3.0 4.3 1.9 3.2* 1.7 10.2* 8.6* 4.3 6.0 2.9 4.2 1.8 3.4* 1.6 12.6* 9.1* 4.3 6.0* 2.7 4.1 1.7 3.8* 1.6 14.7* 9.2* 4.1 6.0 2.5 4.5 1.8 15.3* 9.4* 3.7 2.7 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0-4.5 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0-4.5 3.0 4.5 6.0 4.7* 4.7* 3.6* 3.6* 4.8* 4.8* 4.5* 4.5* 3.2* 3.2* 5.9* 5.9* 5.9* 5.9* 5.1* 5.1* 3.1* 3.1* 9.9* 9.9* * * 5.7* 5.3 4.5* 3.7 3.2* 3.2* 10.2* 10.2* 8.6* * 6.2* 5.2* 5.1* 3.7 3.4* 3.3 12.6* 12.6* 9.1* 8.1 6.6* 5.3 5.1* 3.6 3.8* 3.4 14.7* 14.7* 9.2* * 5.1 4.7* 3.8 15.3* 15.3* 9.4* * 5.7 3.0 4.5 6.0 3.5* 3.5* 2.9* 2.9 2.7* 2.7* 3.8* 3.1 2.4* 2.0 4.3* 4.3* 4.3* 3.0 3.4* 1.9 2.4* 1.7 10.0* 8.1* * 4.4 5.3* 2.9 4.3* 1.9 2.4* 1.5 10.3* * 8.1* 4.3 5.9 2.9 4.2 1.9 2.5* 1.4 11.8* 8.9* 4.3* 5.9* 2.8 4.1 1.7 2.8* 1.5 14.0* 9.0* 4.1 6.0 2.5 4.0 1.6 3.4* 1.6 14.9* 9.3* 3.8 5.9 2.3 5.1* 2.1 3.0 4.5 6.0 3.5* 3.5* 2.9* 2.9* 2.7* 2.7* 3.8* 3.8* 2.4* 2.4* 4.3* 4.3* 4.3* 4.3* 3.4* 3.4* 2.4* 2.4* 10.0* 10.0* * * 5.3* 5.3 4.3* 3.7 2.4* 2.4* 10.3* 10.3* 8.1* 6.0* 5.2 4.9* 3.7 2.5* 2.5* 11.8* 11.8* 8.9* * * 5.2 5.0* 3.6 2.8* 2.8* 14.0* 14.0* 9.0* 8.1 6.5* 5.1 4.4* 3.5 3.4* 3.4* 14.9* 14.9* 9.3* 8.1 * 4.9 5.1* 4.5 4.9 4.8 4.9 4.8 5.5 5.5 4.1 8.2 4.1 8.2
WHEELED EXCAVATORS WX188 23
Specifications WX188 Engine Net fl ywheel power (ISO 14396/ECE R120) 118 kw / 158 hp Rated 2000 rp Make and odel F4GE9684E J607 Type Water-cooled, direct injection type diesel engine with intercooler turbo-charger Displaceent l Nuber of cylinders 6 Bore x stroke 104 x 132 Maxiu torque at 1200 rp 670 N Electrical syste Voltage 24 V Batteries 2 x 12 V Battery rating (each) 100 Ah Alternator 70 A Starter otor 4 kw Transission k/h k/h Max Road travel speed 20 35 Max Field travel speed 5 8 Creep speed 2.5 2.5 Maxiu drawbar pull (fi eld) 115 kn Power Shift ulti-disc gearbox shiftable under load. Autoatic or anual gear shift control. Travel ode autoatically engaged by pressing accelerator pedal. Hydraulic syste 2 x Priary pups 3 variable displaceent, axial piston Total axiu fl ow 389 l/in (2 x 144 + 101) Auxiliary low fl ow, optional (on/off) 22 l/in Auxiliary ediu fl ow, optional (proportional) 80 l/in Ipleent/travel pressure 340 / 370 bar PowerBoost 370 bar Swing circuit pressure 360 / 390 bar Pilot pup 45 bar Boo cylinder ono 115 x 1170 Boo cylinder 2-piece boo 115 x 1020 Ar cylinder 125 x 1290 Bucket cylinder 105 x 1025 Positioning cylinder 155 x 745 Cylinder end stroke daping. Electrohydraulic servo-control. Three-pup hydraulics with two ain pups and separate swing pup. 8 selectable power stages with peranent Power Boost in lift stages: Low idle, Lift 1, Lift 2, Eco 1, Eco 2, Eco 3, Heavy, Roadtravel Levelling ode for sooth operation. Adjustable swing acceleration (power) and deceleration (brake) Autoatic power increase in the drive ode. Swing drive Swing speed 9 rp Swing torque 53 kn The swing function is operated bu a hydraulic closed circuit coupled with a echanical reducer integrating an autoatic static brake. The hudrostatic swing brake is adjustable in 3 settings. Brakes Service brakes: play free, oil bath ulti disc type integrated in all four wheel hubs. Work brake: acts on service brakes and locks front axle oscillation. Parking brake: spring type echanical acting on the transission. Eergency brake: double braking circuit and autoatic parking and brake actuation with the engine shut down. Steering Type ORBITROL with safety valve Pup gear type Steering cylinder double effect, integrated in axle Tyres Twin tyres 10.00-20/80-22.5 Single tyres 18R 19.5, 600/40-22.5 Tyre availability can be liited by local hoologation. Capacities Engine oil 15 l Cooling syste 22 l Fuel tank 274 l Hydraulic syste (incl. tank) 235 l for ono 250 l for triple articulation 24
General diensions equipped with twin tires 10.00-20 2480 A B 3200 375 1200 985 1200 2650 2650 1080 1925/2125 2550/2750 3200 270 1030 1080 1180 1925/2125 2550/2750 TRIPLE ARTICULATION MONOBOOM Operating weight 2.55 axle width include bucket 610 kg and quick coupler 250 kg (with 10.00-20) Ar 2.20 Ar 2.60 Ar 3.10 Ar 2.20 Ar 2.60 Ar 3.10 A 2880 2830 3490 3120 3200 3800 B with rear blade 8920 8845 8835 8890 8810 8820 B with rear stabilizers 8920 8845 8835 8895 8810 8820 TRIPLE ARTICULATION MONOBOOM 2.75 axle width include bucket 610 kg and quick coupler 250 kg (with 11.00-20) Ar 2.20 Ar 2.60 Ar 3.10 Ar 2.20 Ar 2.60 Ar 3.10 Rear blade 18550 kg 18600 kg 18700 kg 18150 kg 18200 kg 18300 kg Stabilizers 18950 kg 19000 kg 19100 kg 18550 kg 18600 kg 18700 kg Blade and stabilizers 19500 kg 19550 kg 19650 kg 19150 kg 19200 kg 19300 kg Stabilizers rear and front 20000 kg 20050 kg 20150 kg 19650 kg 19700 kg 19800 kg TRIPLE ARTICULATION MONOBOOM Ar 2.20 Ar 2.60 Ar 3.10 Ar 2.20 Ar 2.60 Ar 3.10 Rear blade 18650 kg 18700 kg 18800 kg 18250 kg 18300 kg 18400 kg Stabilizers 19050 kg 19100 kg 19200 kg 18650 kg 18700 kg 18800 kg Blade and stabilizers 19650 kg 19700 kg 19800 kg 19250 kg 19300 kg 19400 kg Stabilizers rear and front 20100 kg 20150 kg 20250 kg 19750 kg 19800 kg 19900 kg 25
Perforance data TRIPLE ARTICULATION MONOBOOM G E G E D D F F H H C C C C A B B A TRIPLE ARTICULATION MONOBOOM Ar 2.20 Ar 2.60 Ar 3.10 Ar 2.20 Ar 2.60 Ar 3.10 A Max. digging reach 9000 9400 9900 8900 9300 9800 B Max. digging reach at ground level 8800 9200 9700 8700 9100 9600 C Max. digging depth 4900 5300 5800 4900 5300 5800 C Max. depth of cut for 8 level botto 4800 5200 5700 4700 5100 5700 D Max. digging height 10100 10300 10800 9200 9300 9600 E Min. front swing radius 3050 2800 2900 3400 3300 3300 F Max. loading height 7400 7600 8000 6500 6600 7000 G Front swing radius at ax height 2900 3200 3500 4400 4800 5200 H Max. loading height (ar retracted) 3700 3100 2600 3100 2700 2200 Digging force - ISO Ar digging force - with auto power boost Bucket digging force - with auto power boost Ar 2.20 Ar 2.60 Ar 3.10 98 kn 84 kn 73 kn 107 kn 91 kn 79 kn 125 kn 125 kn 125 kn 136 kn 136 kn 136 kn
Lifting capacity Mono boo - dipperstick 2.20 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 4.5* 4.3 5.0 3.1 4.0* 2.8 * 4.6 4.9 3.0 3.8 2.3 4.2 4.7 2.8 3.4 2.0 6.9 3.8 4.5 2.6 3.3 1.9 3.3 1.9 3.7 4.4 2.5 3.4 2.0 11.2* 3.7 4.4 2.5 3.8 2.2 9.8* 6.9 6.9 3.8 5.0 2.9 3.0 4.5 6.0 4.5* 4.5* 5.3* 5.3* 4.0* 4.0* * * * 5.3 3.9* 3.9* 8.8* * 5.1 4.0* 3.7 9.9* * 4.9 4.7* 3.6 4.3* 3.5 10.1* * 4.8 4.9* 3.7 11.2* 11.2* 9.4* 6.9* 4.8 5.8* 4.1 9.8* 9.8* * * 5.5* All the lift capacity values are in tonnes and without bucket. As per ISO 10567 the indicated load is no ore than 87% of hydraulic syste lifting capacity or 75% of static tipping load. Values arked with an asterisk are liited by the hydraulic syste. 4.9 4.9 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 4.5* 4.5* 5.3* 3.6 4.0* 3.3 * * 3.5 3.9* 2.7 8.8* 4.9 * 3.3 4.0* 2.4 9.9* 4.6 3.1 4.7* 2.3 4.3* 2.3 10.1* 4.4 3.0 4.9* 2.4 11.2* 9.4* 4.4 6.9* 3.0 5.8* 2.7 9.8* 8.5 * 4.6 5.5* 3.4 3.0 4.5 6.0 4.5* 4.5* 5.3* 5.3* 4.0* 4.0* * * * * 3.9* 3.9* 8.8* 8.8* * 6.2 4.0* 4.0* 9.9* 9.3 * 6.0 4.7* 4.3 4.3* 4.3 10.1* 9.1 * 5.9 4.9* 4.5 11.2* 11.2* 9.4* 9.1 6.9* 5.9 5.8* 5.1 9.8* 9.8* * * 5.5* 5.5* 4.9 4.9 Mono boo - dipperstick 2.60 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 3.0* 3.0* 4.6* 3.1 2.7* 2.6 * 4.7 5.0 3.0 2.6* 2.1 4.3 4.8 2.8 3.4 2.0 2.7* 1.9 6.9 3.9 4.6 2.7 3.3 1.9 2.9* 1.8 6.0* 6.0* 3.7 4.4 2.5 3.3 1.9 3.2 1.8 10.5* 6.6 3.7 4.4 2.5 3.5 2.0 11.1* 3.7 4.5 2.6 4.4 2.6 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 3.0* 3.0* 4.6* 3.6 2.7* 2.7* * 5.5 5.8* 3.5 2.6* 2.5 * 5.0 * 3.3 4.4* 2.4 2.7* 2.2 9.7* 4.6 * 3.1 5.1 2.3 2.9* 2.1 6.0* 6.0* 10.1* 4.4 3.0 4.6* 2.2 3.3* 2.2 10.5* 8.2 9.6* 4.4 3.0 4.1* 2.4 11.1* 8.1* 4.5 * 3.1 5.5* 3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 3.0* 3.0* 4.6* 4.6* 2.7* 2.7* * * 5.8* 5.3 2.6* 2.6* * * 5.1 4.4* 3.6 2.7* 2.7* 9.7* * 4.9 * 3.6 2.9* 2.9* 6.0* 6.0* 10.1* * 4.8 4.6* 3.5 3.3* 3.3* 10.5* 10.5* 9.6* * 4.7 4.1* 3.8 11.1* 11.1* 8.1* * 4.8 5.5* 4.8 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 3.0* 3.0* 4.6* 4.6* 2.7* 2.7* * * 5.8* 5.8* 2.6* 2.6* * * * 6.2 4.4* 4.4* 2.7* 2.7* 9.7* 9.4 * 6.0 * 4.3 2.9* 2.9* 6.0* 6.0* 10.1* 9.1 * 5.9 4.6* 4.3 3.3* 3.3* 10.5* 10.5* 9.6* 9.1 * 5.8 4.1* 4.1* 11.1* 11.1* 8.1* 8.1* * * 5.5* 5.5* Mono boo - dipperstick 3.10 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 2.5* 2.5* 2.2* 2.2* 4.1* 3.2 1.9* 1.9* 4.9* 3.0 3.3* 2.1 1.9* 1.9 12.0* 4.3 4.8 2.8 3.4 2.0 1.9* 1.7 3.9 4.5 2.6 3.3 1.9 2.0* 1.6 * * 3.6 4.4 2.5 3.2 1.8 2.3* 1.6 9.4* 6.6 3.6 4.3 2.4 3.2 1.8 2.8* 1.8 12.4* 6.6 6.6 3.6 4.3 2.4 3.7* 2.1 8.2 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 2.5* 2.5* 2.2* 2.2* 4.1* 3.7 1.9* 1.9* 4.9* 3.5 3.3* 2.4 1.9* 1.9* 12.0* 9.4 * 5.1 6.0* 3.3 4.5* 2.4 1.9* 1.9* 9.2* 4.7 * 3.1 5.0 2.3 2.0* 1.9 * * 10.0* 4.4 3.0 4.9 2.2 2.3* 1.9 9.4* 9.8* 4.3 6.9 2.9 3.8* 2.2 2.8* 2.1 12.4* 8.1 8.6* 4.3 6.2* 2.9 3.7* 2.6 8.2 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 2.5* 2.5* 2.2* 2.2* 4.1* 4.1* 1.9* 1.9* 4.9* 4.9* 3.3* 3.3* 1.9* 1.9* 12.0* 12.0* * * 6.0* 5.1 4.5* 3.6 1.9* 1.9* 9.2* * 4.9 5.5* 3.5 2.0* 2.0* * * 10.0* * 4.7 * 3.4 2.3* 2.3* 9.4* 9.4* 9.8* * 4.6 3.8* 3.4 2.8* 2.8* 12.4* 12.4* 8.6* 6.2* 4.7 3.7* 3.7* 8.2 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 2.5* 2.5* 2.2* 2.2* 4.1* 4.1* 1.9* 1.9* 4.9* 4.9* 3.3* 3.3* 1.9* 1.9* 12.0* 12.0* * * 6.0* 6.0* 4.5* 4.4 1.9* 1.9* 9.2* 9.2* * 6.0 5.5* 4.3 2.0* 2.0* * * 10.0* 9.1 * 5.8 * 4.2 2.3* 2.3* 9.4* 9.4* 9.8* 9.0 * 5.7 3.8* 3.8* 2.8* 2.8* 12.4* 12.4* 8.6* 8.6* 6.2* 5.8 3.7* 3.7* 8.2 27
Lifting capacity Triple articulation - dipperstick 2.20 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 * 4.7 5.1* 3.9 6.2* 4.8 4.9 2.9 4.4 2.6 8.7* * 4.6 4.9 3.0 3.6 2.1 8.1* 4.5 4.8 3.0 3.2 1.9 3.2 1.8 11.5* * 4.5 4.8 2.9 3.2 1.8 3.1 1.8 14.0 4.3 4.6 2.7 3.2 1.8 14.5 4.0 4.4 2.5 3.7 2.1 14.3 6.9 3.8 3.5 3.0 4.5 6.0 * * 5.1* 5.1* 6.2* 6.2* 5.7* 5.3 4.4* 4.4* 8.7* 8.7* * * 5.9* 5.2* 4.2* 3.8 8.1* 8.1* 8.6* 6.5* 5.1 4.7* 3.5 4.2* 3.5 11.5* 11.5* 9.7* * 5.2 * 3.4 4.4* 3.4 14.7* 14.7* 10.0* * 5.0 4.9* 3.5 1* 1 10.2* * 4.8 6.0* 4.0 16.9* 15.7 9.8* 8.9* All the lift capacity values are in tonnes and without bucket. As per ISO 10567 the indicated load is no ore than 87% of hydraulic syste lifting capacity or 75% of static tipping load. Values arked with an asterisk are liited by the hydraulic syste. 5.0 4.8 5.0 4.8 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 * 5.5 5.1* 4.6 6.2* 5.5 5.7* 3.4 4.4* 3.0 8.7* 8.7* * 5.9* 3.5 4.2* 2.5 8.1* 8.1* 8.6* 5.2 6.5* 3.5 4.7* 2.2 4.2* 2.2 11.5* 9.1 9.7* 5.2* 3.4 5.0* 2.2 4.4* 2.1 14.7* 9.2 10.0* 5.1 3.2 4.9* 2.2 1* 8.9 10.2* 4.8 3.0 5.9 2.5 16.9* 8.7 9.8* 4.6 8.9* 4.2 3.0 4.5 6.0 * * 5.1* 5.1* 6.2* 6.2* 5.7* 5.7* 4.4* 4.4* 8.7* 8.7* * * 5.9* 5.9* 4.2* 4.2* 8.1* 8.1* 8.6* 8.6* 6.5* 4.7* 4.3 4.2* 4.2* 11.5* 11.5* 9.7* 9.2* * * 4.2 4.4* 4.1 14.7* 14.7* 10.0* 9.3 * 4.9* 4.3 1* 1* 10.2* 9.7 * 5.9 6.0* 4.9 16.9* 16.9* 9.8* 9.4 8.9* 8.5 5.0 4.8 5.0 4.8 Triple articulation - dipperstick 2.60 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 5.2* 4.8 3.4* 3.3 5.3* 4.8 4.9 3.1 3.0* 2.3 * * 6.5* 4.7 4.9 3.1 3.2* 1.9 2.9* 1.9 10.2* 4.5 4.8 3.1 3.3 1.9 2.9* 1.7 11.7* 4.4 4.8 3.0 3.3 1.9 2.9 1.6 13.8 4.3 4.7 2.7 3.1 1.8 3.0 1.7 14.3 4.1 4.4 2.5 3.3 1.9 14.4 6.9 3.8 4.9 2.7 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 5.2* 5.2* 3.4* 3.4* 5.3* 5.3* 5.0* 3.6 3.0* 2.8 * * 6.5* * 3.6 3.2* 2.3 2.9* 2.3 10.2* 9.4 8.1* 5.2 6.2* 3.5* 5.0* 2.3 2.9* 2.0 11.7* 9.1* 9.4* 5.1 6.9* 3.5 5.0 2.2 3.1* 2.0 14.0* 9.3* 9.9* 5.1 3.2 4.9 2.1 3.4* 2.0 16.2* 8.9 10.1* 4.9 3.0 4.1* 2.2 1* 8.8 10.4* 4.6 * 3.3 28 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 Triple articulation - dipperstick 3.10 +9.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +9.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 5.2* 5.2* 3.4* 3.4* 5.3* 5.3* 5.0* 5.0* 3.0* 3.0* * * 6.5* 6.5* * 5.2* 3.2* 3.2* 2.9* 2.9* 10.2* 10.2* 8.1* 6.2* 5.1 5.0* 3.6 2.9* 2.9* 11.7* 11.7* 9.4* 6.9* 5.1 5.5* 3.5 3.1* 3.1* 14.0* 14.0* 9.9* * 5.0 5.5* 3.4 3.4* 3.2 16.2* 1 10.1* * 4.8 4.1* 3.6 1* 15.9 10.4* * 5.3 3.0 4.5 6.0 3.3* 3.3* 3.3* 3.0* 2.5* 2.5* 4.2* 3.1 2.2* 2.0 4.8* 4.7 4.8* 3.1 3.4 2.0 2.1* 1.7 11.1* 4.5 4.8 3.0 3.4 2.0 2.1* 1.5 11.4* 4.4 4.7* 3.0 3.3 1.9 2.2* 1.4 13.0* 4.4 4.7 2.8 3.2 1.8 2.4* 1.5 14.0 4.1 4.5 2.6 3.1 1.7 2.8* 1.6 14.4 6.9 3.8 4.3 2.4 3.9 2.2 3.0 4.5 6.0 3.3* 3.3* 3.3* 3.3* 2.5* 2.5* 4.2* 4.2* 2.2* 2.2* 4.8* 4.8* 4.8* 4.8* 3.8* 3.6 2.1* 2.1* 11.1* 11.1* * * 5.8* 5.1 4.7* 3.6 2.1* 2.1* 11.4* 11.4* 8.9* 6.5* 5.0 5.2* 3.5 2.2* 2.2* 13.0* 13.0* 9.7* * * 5.1 5.5* 3.4 2.4* 2.4* 15.5* 15.1 9.9* * 4.8 4.8* 3.3 2.8* 2.8* 1* 15.8 10.2* 6.9* 4.7 4.2* 4.2* 4.3 8.1 8.5 4.3 8.1 8.5 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +9.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +9.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 5.2* 5.2* 3.4* 3.4* 5.3* 5.3* 5.0* 5.0* 3.0* 3.0* * * 6.5* 6.5* * * 3.2* 3.2* 2.9* 2.9* 10.2* 10.2* 8.1* 8.1* 6.2* 5.0* 4.3 2.9* 2.9* 11.7* 11.7* 9.4* 9.2 6.9* 6.0 5.5* 4.2 3.1* 3.1* 14.0* 14.0* 9.9* 9.2 * 5.5* 4.2 3.4* 3.4* 16.2* 16.2* 10.1* 9.4* * 5.9 4.1* 4.1* 1* 1* 10.4* 9.4 * 6.6 3.0 4.5 6.0 3.3* 3.3* 3.3* 3.3* 2.5* 2.5* 4.2* 3.6 2.2* 2.2* 4.8* 4.8* 4.8* 3.6 3.8* 2.4 2.1* 2.0 11.1* 9.4 * 5.2 5.8* 3.5 4.7* 2.4 2.1* 1.8 11.4* 9.1 8.9* 5.0 6.5* 3.4 5.0 2.3 2.2* 1.7 13.0* 9.1* 9.7* 5.1 6.9* 3.3 4.9 2.1 2.4* 1.8 15.5* 8.9 9.9* 4.9 3.1 4.8* 2.0 2.8* 1.9 1* 8.8 10.2* 4.6 6.9 2.9 4.2* 2.6 3.0 4.5 6.0 3.3* 3.3* 3.3* 3.3* 2.5* 2.5* 4.2* 4.2* 2.2* 2.2* 4.8* 4.8* 4.8* 4.8* 3.8* 3.8* 2.1* 2.1* 11.1* 11.1* * * 5.8* 5.8* 4.7* 4.3 2.1* 2.1* 11.4* 11.4* 8.9* 8.9* 6.5* 5.9 5.2* 4.2 2.2* 2.2* 13.0* 13.0* 9.7* 9.1 * 5.9 5.5* 4.2 2.4* 2.4* 15.5* 15.5* 9.9* 9.2* * 5.9 4.8* 4.1 2.8* 2.8* 1* 1* 10.2* 9.4 6.9* 5.7 4.2* 4.2* 4.3 8.1 8.5 4.3 8.1 8.5
Lifting capacity Mono boo - dipperstick 2.20 - axle 2.75 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 Mono boo - dipperstick 2.60 - axle 2.75 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 4.5* 4.5* 5.0 3.5 4.0* 3.2 * 5.2 4.9 3.4 3.8 2.6 4.8 4.8 3.2 3.4 2.3 6.9 4.4 4.6 3.0 3.3 2.2 3.3 2.2 4.3 4.5 2.9 3.4 2.3 11.2* 4.3 4.4 2.9 3.9 2.6 9.8* 8.2 6.9 4.4 5.0 3.3 3.0 4.5 6.0 4.5* 4.5* 5.3* 5.3* 4.0* 4.0* * * * 5.5 3.9* 3.9* 8.8* 8.2 * 5.3 4.0* 3.8 9.9* * 5.1 4.7* 3.7 4.3* 3.7 10.1* * 5.0 4.9* 3.8 11.2* 11.2* 9.4* 6.9* 5.0 5.8* 4.3 9.8* 9.8* * * 5.5* 5.5* 3.0 4.5 6.0 3.0* 3.0* 4.6* 3.5 2.7* 2.7* * 5.3 5.0 3.4 2.6* 2.4 4.9 4.8 3.2 3.4 2.3 2.7* 2.2 4.5 4.6 3.0 3.3 2.2 2.9* 2.1 6.0* 6.0* 4.3 4.4 2.9 3.3 2.2 3.2 2.1 10.5* 4.3 4.4 2.9 3.5 2.3 11.1* 4.3 4.5 3.0 4.4 2.9 3.0 4.5 6.0 3.0* 3.0* 4.6* 4.6* 2.7* 2.7* * * 5.8* 5.5 2.6* 2.6* * * * 5.3 4.4* 3.8 2.7* 2.7* 9.7* * 5.1 * 3.7 2.9* 2.9* 6.0* 6.0* 10.1* * 5.0 4.6* 3.7 3.3* 3.3* 10.5* 10.5* 9.6* * 4.9 4.1* 4.0 11.1* 11.1* 8.1* * 5.0 5.5* 5.0 All the lift capacity values are in tonnes and without bucket. As per ISO 10567 the indicated load is no ore than 87% of hydraulic syste lifting capacity or 75% of static tipping load. Values arked with an asterisk are liited by the hydraulic syste. 4.9 4.9 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 4.5* 4.5* 5.3* 3.9 4.0* 3.6 * 5.9 * 3.8 3.9* 2.9 8.8* 5.5 * 3.6 4.0* 2.6 9.9* 5.1 * 3.5 4.7* 2.5 4.3* 2.5 10.1* 4.9 3.4 4.9* 2.6 11.2* 9.4 9.4* 5.0 6.9* 3.3 5.8* 2.9 9.8* 9.6 * 5.1 5.5* 3.8 3.0 4.5 6.0 4.5* 4.5* 5.3* 5.3* 4.0* 4.0* * * * * 3.9* 3.9* 8.8* 8.8* * 6.2 4.0* 4.0* 9.9* 9.4 * 6.0 4.7* 4.3 4.3* 4.3* 10.1* 9.2 * 5.9 4.9* 4.5 11.2* 11.2* 9.4* 9.2 6.9* 5.9 5.8* 5.1 9.8* 9.8* * * 5.5* 5.5* 3.0 4.5 6.0 3.0* 3.0* 4.6* 4.0 2.7* 2.7* * 6.0 5.8* 3.8 2.6* 2.6* * * 3.7 4.4* 2.6 2.7* 2.4 9.7* 5.2 * 3.5 5.1 2.5 2.9* 2.4 6.0* 6.0* 10.1* 4.9 3.3 4.6* 2.5 3.3* 2.4 10.5* 9.3 9.6* 4.9 3.3 4.1* 2.7 11.1* 9.5 8.1* 5.0 * 3.4 5.5* 3.3 3.0 4.5 6.0 3.0* 3.0* 4.6* 4.6* 2.7* 2.7* * * 5.8* 5.8* 2.6* 2.6* * * * 6.2 4.4* 4.4* 2.7* 2.7* 9.7* 9.4 * 6.0 * 4.3 2.9* 2.9* 6.0* 6.0* 10.1* 9.2 * 5.9 4.6* 4.3 3.3* 3.3* 10.5* 10.5* 9.6* 9.1 * 5.9 4.1* 4.1* 11.1* 11.1* 8.1* 8.1* * * 5.5* 5.5* 4.9 4.9 30 Mono boo - dipperstick 3.10 - axle 2.75 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 2.5* 2.5* 2.2* 2.2* 4.1* 3.6 1.9* 1.9* 4.9* 3.4 3.3* 2.4 1.9* 1.9* 12.0* 9.1 5.0 4.8 3.2 3.4 2.3 1.9* 1.9 4.5 4.6 3.0 3.3 2.2 2.0* 1.8 * * 4.2 4.4 2.9 3.2 2.1 2.3* 1.9 9.4* 6.6 4.2 4.3 2.8 3.2 2.1 2.8* 2.0 12.4* 6.6 4.2 4.4 2.8 3.7* 2.5 3.0 4.5 6.0 2.5* 2.5* 2.2* 2.2* 4.1* 4.1* 1.9* 1.9* 4.9* 4.9* 3.3* 3.3* 1.9* 1.9* 12.0* 12.0* * * 6.0* 5.3 4.5* 3.8 1.9* 1.9* 9.2* * 5.1 5.5* 3.7 2.0* 2.0* * * 10.0* * 4.9 * 3.6 2.3* 2.3* 9.4* 9.4* 9.8* * 4.9 3.8* 3.6 2.8* 2.8* 12.4* 12.4* 8.6* 6.2* 4.9 3.7* 3.7* 8.2 8.2 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 2.5* 2.5* 2.2* 2.2* 4.1* 4.0 1.9* 1.9* 4.9* 3.9 3.3* 2.7 1.9* 1.9* 12.0* 10.6 * 6.0* 3.7 4.5* 2.6 1.9* 1.9* 9.2* 5.2 * 3.4 5.1 2.5 2.0* 2.0* * * 10.0* 4.9 3.3 5.0 2.4 2.3* 2.1 9.4* 9.1 9.8* 4.8 3.2 3.8* 2.4 2.8* 2.3 12.4* 9.2 8.6* 4.9 6.2* 3.3 3.7* 2.8 3.0 4.5 6.0 2.5* 2.5* 2.2* 2.2* 4.1* 4.1* 1.9* 1.9* 4.9* 4.9* 3.3* 3.3* 1.9* 1.9* 12.0* 12.0* * * 6.0* 6.0* 4.5* 4.4 1.9* 1.9* 9.2* 9.2* * 6.0 5.5* 4.3 2.0* 2.0* * * 10.0* 9.1 * 5.8 * 4.2 2.3* 2.3* 9.4* 9.4* 9.8* 9.0 * 5.8 3.8* 3.8* 2.8* 2.8* 12.4* 12.4* 8.6* 8.6* 6.2* 5.8 3.7* 3.7* 8.2 8.2
Lifting capacity Triple articulation - dipperstick 2.20 - axle 2.75 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 5.0 4.8 5.0 4.8 Triple articulation - dipperstick 2.60 - axle 2.75 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 Triple articulation - dipperstick 3.10 - axle 2.75 +9.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +9.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 * 5.1* 4.4 6.2* 4.9 3.3 4.4 3.0 8.7* 8.7* * 5.2 4.9 3.4 3.6 2.4 8.1* 8.1* 5.1 4.9 3.4 3.3 2.2 3.2 2.1 11.5* 8.9 * 5.0 4.8 3.3 3.2 2.1 3.1 2.0 14.0 8.9 4.9 4.6 3.1 3.2 2.1 14.6 8.6 4.7 4.4 2.9 3.7 2.4 14.3 6.9 4.4 4.0 3.0 4.5 6.0 * * 5.1* 5.1* 6.2* 6.2* 5.7* 5.5 4.4* 4.4* 8.7* 8.7* * * 5.9* 4.2* 4.0 8.1* 8.1* 8.6* 6.5* 5.3 4.7* 3.7 4.2* 3.6 11.5* 11.5* 9.7* * 5.3 * 3.6 4.4* 3.5 14.7* 14.7* 10.0* 8.1 * 5.2 4.9* 3.6 1* 16.2 10.2* 8.1 * 5.0 6.0* 4.2 16.9* 1 9.8* 8.9* 3.0 4.5 6.0 5.2* 5.2* 3.4* 3.4* 5.3* 5.3* 5.0 3.5 3.0* 2.7 * * 6.5* 5.3 4.9 3.5 3.2* 2.2 2.9* 2.2 10.2* 9.0 5.1 4.8 3.5 3.3 2.2 2.9* 2.0 11.7* 8.9 5.0 4.8 3.4 3.3 2.2 2.9 1.9 13.9 9.0 5.0 4.7 3.1 3.2 2.1 3.0 1.9 14.3 8.6 4.7 4.5 2.9 3.4 2.2 14.5 8.5 6.9 4.4 4.9 3.2 3.0 4.5 6.0 5.2* 5.2* 3.4* 3.4* 5.3* 5.3* 5.0* 5.0* 3.0* 3.0* * * 6.5* 6.5* * * 3.2* 3.2* 2.9* 2.9* 10.2* 10.2* 8.1* 8.1 6.2* 5.3 5.0* 3.7 2.9* 2.9* 11.7* 11.7* 9.4* 6.9* 5.3 5.5* 3.6 3.1* 3.1* 14.0* 14.0* 9.9* * 5.2 5.5* 3.6 3.4* 3.4 16.2* 16.0* 10.1* 8.2 * 5.0 4.1* 3.8 1* 1* 10.4* * 5.5 3.0 4.5 6.0 3.3* 3.3* 3.3* 3.3* 2.5* 2.5* 4.2* 3.5 2.2* 2.2* 4.8* 4.8* 4.8* 3.5 3.4 2.3 2.1* 1.9 11.1* 9.1 5.0 4.8 3.4* 3.4 2.3 2.1* 1.7 11.4* 8.7 4.9 4.7* 3.4 3.3 2.2 2.2* 1.7 13.0* 8.8 4.9 4.7 3.2 3.2 2.1 2.4* 1.7 14.0 8.6 4.7 4.5 3.0 3.1 2.0 2.8* 1.9 14.4 4.4 4.3 2.8 3.9 2.5 All the lift capacity values are in tonnes and without bucket. As per ISO 10567 the indicated load is no ore than 87% of hydraulic syste lifting capacity or 75% of static tipping load. Values arked with an asterisk are liited by the hydraulic syste. 4.3 8.1 8.5 3.0 4.5 6.0 3.0 4.5 6.0 3.3* 3.3* 4.3 +9.0 3.3* 3.3* 2.5* 2.5* 4.2* 4.2* 2.2* 2.2* +6.0 4.8* 4.8* 4.8* 4.8* 3.8* 3.8 2.1* 2.1* 8.1 +4.5 11.1* 11.1* * * 5.8* 5.3 4.7* 3.7 2.1* 2.1* +3.0 11.4* 11.4* 8.9* 6.5* 5.2 5.2* 3.7 2.2* 2.2* 8.5 +1.5 13.0* 13.0* 9.7* * 5.2* 5.5* 3.6 2.4* 2.4* 0 15.5* 15.5* 9.9* 8.1 * 5.1 4.8* 3.5 2.8* 2.8* -1.5 1* 1* 10.2* 6.9* 4.9* 4.2* 4.2* -3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 +9.0 +6.0 +4.5 +3.0 +1.5 0-1.5-3.0 3.0 4.5 6.0 * 6.0 5.1* 5.0 6.2* 6.0 5.7* 3.8 4.4* 3.3 8.7* 8.7* * 5.8 5.9* 3.9 4.2* 2.7 8.1* 8.1* 8.6* 5.7 6.5* 3.8 4.7* 2.5 4.2* 2.4 11.5* 10.1 9.7* * 3.7 5.0 2.4 4.4* 2.3 14.7* 10.4 10.0* * 3.5 4.9* 2.4 1* 10.1 10.2* 5.3 3.3 5.9 2.8 16.9* 9.9 9.8* 5.1 8.9* 4.6 3.0 4.5 6.0 * * 5.1* 5.1* 6.2* 6.2* 5.7* 5.7* 4.4* 4.4* 8.7* 8.7* * * 5.9* 5.9* 4.2* 4.2* 8.1* 8.1* 8.6* 8.6* 6.5* 4.7* 4.3 4.2* 4.2* 11.5* 11.5* 9.7* 9.2 * * 4.2 4.4* 4.1 14.7* 14.7* 10.0* 9.3 * 4.9* 4.3 1* 1* 10.2* 9.7 * 5.9 6.0* 5.0 16.9* 16.9* 9.8* 9.4 8.9* 8.5 3.0 4.5 6.0 5.2* 5.2* 3.4* 3.4* 5.3* 5.3* 5.0* 3.9 3.0* 3.0* * * 6.5* 5.9* * 3.9* 3.2* 2.5 2.9* 2.5 10.2* 10.2* 8.1* 5.7 6.2* 3.8 5.0* 2.5 2.9* 2.3 11.7* 10.1 9.4* 6.9* 3.8 5.0 2. 3.1* 2.2 14.0* 10.2 9.9* 5.7 * 3.6 4.9 2.4 3.4* 2.2 16.2* 10.1 10.1* 3.3 4.1* 2.5 1* 10.0 10.4* 5.1 * 3.7 3.0 4.5 6.0 5.2* 5.2* 3.4* 3.4* 5.3* 5.3* 5.0* 5.0* 3.0* 3.0* * * 6.5* 6.5* * * 3.2* 3.2* 2.9* 2.9* 10.2* 10.2* 8.1* 8.1* 6.2* 5.0* 4.3* 2.9* 2.9* 11.7* 11.7* 9.4* 9.2* 6.9* 5.5* 4.3 3.1* 3.1* 14.0* 14.0* 9.9* 9.2 * 5.5* 4.2 3.4* 3.4* 16.2* 16.2* 10.1* 9.5 * 5.9 4.1* 4.1* 1* 1* 10.4* 9.4 * 6.6 3.0 4.5 6.0 3.3* 3.3* 3.3* 3.3* 2.5* 2.5* 4.2* 3.9 2.2* 2.2* 4.8* 4.8* 4.8* 3.8 3.8* 2.6 2.1* 2.1* 11.1* 10.4* * 5.7 5.8* 3.8 4.7* 2.6 2.1* 2.0 11.4* 10.1* 8.9* 5.5 6.5* 3.8* 5.0 2.5 2.2* 1.9 13.0* 10.0 9.7* 5.5 6.9 3.7 4.9 2.4 2.4* 2.0 15.5* 10.1 9.9* 3.4 4.8* 2.3 2.8* 2.2 1* 9.9 10.2* 5.1 6.9* 3.2 4.2* 2.9 3.3* 3.3* 3.3* 3.3* 2.5* 2.5* 4.2* 4.2* 2.2* 2.2* 4.8* 4.8* 4.8* 4.8* 3.8* 3.8* 2.1* 2.1* 11.1* 11.1* * * 5.8* 5.8* 4.7* 4.3 2.1* 2.1* 11.4* 11.4* 8.9* 8.9* 6.5* 6.0 5.2* 4.3 2.2* 2.2* 13.0* 13.0* 9.7* 9.1* * 6.0 5.5* 4.2 2.4* 2.4* 15.5* 15.5* 9.9* 9.2 * 5.9 4.8* 4.1 2.8* 2.8* 1* 1* 10.2* 9.5 6.9* 5.8 4.2* 4.2* 5.0 4.8 5.0 4.8 4.3 8.1 8.5 4.3 8.1 8.5 31
Standard Equipent Latest generation FPT Stage III / Tier 3 diesel engine Direct injection with turbo charger and charge air cooling Air fi lter with safety cartridge Engine fi lters (oil, fuel and water separator) in reote position Auto-idling syste Cold starting equipent (-25 C) Pup anageent syste by power liit control Electrohydraulic servo control 3-pups hydraulic syste with two service pups and seperate swing pup Auto Power Boost syste 8 selectable power stages with peranent Power Boost in lift stages Autoatic power increase in road travel ode Autoatic battery ain switch (coupled to ignition key) Electronic iobiliser (PIN code) 12 V electrical auxiliary supply in cab Swing hydrostatic braking Autoatic / peranent swing brake odes Swing drive with low-wearing disc brake CIS (CASE intelligent syste) : Adjustable swing acceleration (power) and deceleration (brake) CLM (CASE leveling ode) Cab according ROPS ISO 12117-2: 2008 FOPS Level 2 Noise-insulated and viscous ounted cab Tinted safety glazing all around, full up and over windscreen Sun blinds, large roof window, transparent rain protection Autoatic air conditioning Options Hydraulic circuit for haer / shears Hydraulic circuit for grab rotation 22 l/in - ON/OFF control Hydraulic circuit for grab rotation 80 l/in - PROPORTIONAL Control Quick coupler provision on upperfrae Biodegradable hydraulic oil (Panolin) Front Guard Protective syste FGPS 20 k/h speed 35 k/h speed Single or twin tyres Dozer blade with parallel guidance Rear View Caera with dedicated screen Radio with Bluetooth Control panel with LCD onitor integrating error diagnosis function and analogical gauges for engine cooling teperature and fuel level Ergonoic design of ar rests and foot pedals Air suspension seat individually adjustable for height and incline Consoles adjustable for height and length Forward/Reverse shifting on right joystick Centralised and independent control of blade and stabilizers on right joystick 2 front headlights (cab ounted) Road travel lights (front and rear) Robust, shiled arc-welded, odular chassis in box section design Power Shift gear box with anual / autoatic gear shifting Heavy duty axles with brakes for play-free work Hydrostatic travel braking Creeper speed Large toolbox under the step (right side) Encased ball bearing slew ring with long-life lubrication Manual / autoatic axle locking syste Electric diesel fi lling syste Safety valves on boo cylinders Cylinders with end-stroke daping syste Long interval greasing bushings (500 hours) Centralized greasing nipples on uppefrae and boo 2 working lights on boo Heavy duty stabilizers with cylinder protection guards Transport holder for clashell grab Blade cylinders protection guard One piece boo, triple articulation (2 piece boo) Ars: WX148: 2.10-2.45-2.95 WX168/WX198: 2.20-2.60-3.10 Object handling kit with safety valve on ar cylinder, overloading warning device and load hook or load eye. For No. 20054GB - Printed in Italy - MediaCross Firenze - 10/12 Standard and optional equipent shown can vary by country. Worldwide Case Construction Equipent Contact Inforation EUROPE: via Plava, 80 10135 TORINO - ITALIA AFRICA/MIDDLE EAST/CIS: Riva Paradiso 14 6902 Paradiso - SWITZERLAND NORTH AMERICA/MEXICO: 700 State Street Racine, WI 53404 U.S.A. LATIN AMERICA: Av. General David Sarnoff 2237 32210-900 Contage - MG Belo Horizonte BRAZIL ASIA PACIFIC: Unit 1-1 Foundation Place - Prospect New South Wales - 2148 AUSTRALIA CHINA: No. 29, Industrial Preises, No. 376. De Bao Road, Waigaoqiao Ftz, Pudong, SHANGHAI, 200131, P.R.C. CASE Construction Equipent CNH UK Ltd Unit 4, Hayfi eld Lane Business Park, Field Lane, Auckley, Doncaster, DN9 3FL Tel. 00800-2273-7373 Fax +44 1302 802829 Custoer Assistance 00800-2273-7373 The call is free fro a land line. Check in advance with your Mobile Operator if you will be charged. NOTE: Standard and optional fi ttings can vary according to the deands and specifi c regulations of each country. The illustrations ay include optional rather than standard fi ttings - consult your Case dealer. Furtherore, CNH reserves the right to odify achine specifi cations without incurring any obligation relating to such changes. Confors to directive 98/37/CE www.casece.co