Seating and Positioning Product Information

Seating and Positioning Product Information

Ottobock and NUTEC Innovative solutions built for changing client needs, accommodating countless seating systems. As succinct as the principle that guides them, Ottobock and NUTEC strive to meet the individual needs of clients the world over. Ottobock became a namesake in seating accessories early on and now adding the NUTEC line of products has strengthened that reach and solidified commitments to quality, durability and standard of care. Core to NUTEC is customization, understanding every client is different and requires solutions designed to work with evolving needs. Practical, intelligent design has made accommodating those needs possible. Inside these pages, you re sure to find solutions that work for you and your clients. Remember, if you need to modify existing product or require something specific contact us and we ll customize a suitable solution.

Content Ottobock Seating and Positioning Aids Headrests...4 Mounting and Attachments...6 Thoracic Supports and Accessories...9 Channel Forearm Pads, Hand Pads and Armrests... 12 Foot Buckets and Calf/Legrests... 16 Wheelchair Cushions and Backs... 19 NUTEC Seating and Positioning Aids Solid Seats, Backs and Packages... 26 Seating Packages... 27 Solid Seats... 28 Solid Seat Modifications... 30 Solid Backs... 33 Solid Back Modification... 34 Headrests and Hardware... 39 Headrests... 40 Headrest Modifications... 42 Headrest Hardware... 43 Trunk Supports and Hardware... 46 Lateral Hip and Thigh Supports... 47 Hip Abductor Hardware... 50 Lateral Thoracic Supports... 53 Trunk Support Hardware... 56 Leg and Foot Supports... 60 Footboxes... 61 Foot Positioners... 61 Amputee Supports Hardware... 62 Positioning Belts and Harnesses... 63 Pelvic Positioning Belts... 64 Upper Body Positioning Belts... 65 Belt Parts... 66 Trays and Ancillary Hardware... 67 Custom Trays... 68 Tray Hardware... 68 Ancillary Devices... 70 Transfer Boards... 70 Seat and Back Hardware... 71 Dynamic Hardware... 72 Independent Dynamic Hardware... 72 Knob Release Hardware... 72 Miniature Knob Release Hardware... 74 Hook Hardware... 76 Track Hardware... 77 Pressure Relief Options... 79 Upholstery... 80

Headrests 1 Combined Head/Neckrest The anatomically shaped head/neckrest was designed for patients who have little control over head movement. It offers. excellent lateral flexion control. 1 2 Goose-Neck Style Mounting and Attachments The headrest hardware is designed to offer several.. choices for headrest positioning and attachment,.. including the ability to reposition the headrest as... necessary. Headrest hardware can be used. with any Ottobock or NUTEC headrest pad. 2 3 3 The Headrest Adapter. The headrest adapter kit is attached. to the back tubes of wheelchairs using. S.T.S. clamps available in different sizes... 4 Head and Neckrests

Combined Head/Neckrest The anatomically shaped head/neckrest was designed for patients who have little control over head movement. It offers excellent lateral flexion control. Width Height Depth 430C1=3-7 (small) 7 1 16 (18cm) 4 1 2 (11.5cm) 2 1 8 (5.5cm) 430C1=1-7 (large) 8 11 16 (22cm) 5 1 8 (13cm) 3 9 16 (9cm) Soft Headrest Width Height Depth 430H2=3-7 (small) 6 (1.52cm) 7 1/2 (27.9cm) 2 (5.1cm) 430H2=1-7 (large) 7 1/2 (1.91cm) 11 (27.9cm) 3 (7.6cm) Lateral Control Headrest Width Height Depth 430C2=3-7 (small) 9 13 16. (25cm) 4 1 2 (11.5cm) 3 9 16 (9cm) 7 1 16 (18cm) 430C2=1-7 (large) 8 11 16 (22cm) 5 1 8 (13cm) 5 1 8 (13cm) Headrest Width Height Depth 430H1=3-7 (small) 9 13 16 (25cm) 3 15 16 (10cm) 1 15 16 (5cm) 430H1=1-7 (large) 11 1 2 (29cm) 5 7 8 (15cm) 1 15 16 (5cm) X-Style Headrest The x-style headrest offers maximum postural head support with an anatomical shape that doesn t interfere with the ears. The headrest can be adjusted to conform to an individual s needs by hand shaping the flexible steel insert. Width Height Depth 430C4=1-7 (small) 8 (20.3cm) 7 3 5 (14.7cm) 5 4 5 3 3 10 430C3=1-7 (large) 8 11 16 (22cm) 7 11 16 (19.5cm) 5 5 16 5 1 8 (11cm) (8.5cm) (16cm) (13cm) Headrests and Neckrests 5

Mounting and Attachments The multi-axis adjustments of the goose-neck mounting hardware. provide optimum placement of the headrest. Adjusting the goose-neck. mounting hardware is easy and efficient allowing for quick changes. in headrest position as necessary to accommodate fluctuating changes. in tone or neck strength. 1 1 Quick release button at all adjustment points. 2 2 Profiled tubing for secure fit with clamps and mounting hardware. 6 Head and Neckrests

Goose-Neck Style Color 476L52=SK030 Silver 476L52=SK035 Black A2 B1 A1 Size A1 Size A2 Size B1 Size B2 17 5/8 (44.8cm) 10 3/4 (27.3cm) 20 1 2 (52.5cm) 4 3 4 (12.3cm) Headrest Clamp 477L52=SK039 477L52=SK055 Color Black Standard Headrest Bracket Black Heavy Duty Clamp Width A Height A Width B Height B 2 1 2 (6.4cm) 2 1 2 (6.4cm) 3 1 4 (8cm) 3 1 4 (8cm) Multi Axis - Straight 476L52=SK020 476L52=SK025 Color Silver Black B Size A Size B 15 3 4 (40cm) 7 7 8 (20cm) A Multi Axis - Offset 476L52=SK010 476L52=SK015 Color Silver Black A C B Size A Size B Size C 15 3 4 (40cm) 7 7 8 (20cm) 2 3 4 (7cm) Mounting and Attachments 7

Headrest Adapter Kit The headrest adapter kit covers seat widths ranging from 7 7 8 (20cm) up to 21 (54cm). The wheelchair can be folded at any time thanks to the simple mounting system. Please order the S.T.S. clamps separately (two units are necessary). Color Size 476D52=SK030 Silver 7-16 1/2 (18cm - 42cm) 476D52=SK035 Black 7-16 1/2 (18cm - 42cm) 476D52=SK040 Silver 15 3/4-21 (40cm - 54cm) 476D52=SK045 Black 15 3/4-21 (40cm - 54cm) 476D52=SK020 Silver 20 1/2-24 (52cm - 62cm) 476D52=SK055 Black 20 1/2-24 (52cm - 62cm) S.T.S. Clamps These clamps can be fastened to the wheelchair without making alterations. Please state tubing size when ordering. For accuracy, please contact wheelchair manufacturer for tubing size. For Ottobock wheelchairs, you need S.T.S. clamps for tube diameter 1 (2.5cm). Color Size/Tube Ø 434H1=7/8 Silver 7/8 (2.2cm) 434H1=1 Silver 1 (2.5cm) 434H1=3/4 Silver 3/4 (1.9cm) 434H1=7/8-7 Black 7/8 (2.2cm) 434H1=1-7 Black 1 (2.5cm) 434H1=3/4-7 Black 3/4 (1.9cm) Clinical Mounting Kit The assembly device easily attaches to the push handles of a wheelchair, with a seat width of 15 3/4 to 21 (40cm-54cm). Color Size 476D52=SK060 Silver 13 16/41-15 3/4 (34cm - 40cm) 476D52=SK065 Black 13 16/41-15 3/4 (34cm - 40cm) 476D52=SK010 Silver 15 3/4-21 (40cm - 54cm) 476D52=SK015 Black 15 3/4-21 (40cm - 54cm) 476D52=SK020 Silver 20 1/2-24 2/5 (52cm - 62cm) 476D52=SK025 Black 20 1/2-24 2/5 (52cm - 62cm) 8 Mounting and Attachments

Thoracic Supports and Accessories 1 S.T.S. Clamps This clamp attaches to any wheelchair. without alteration.. 2 Side Thoracic Supports (S.T.S) To facilitate client positioning and... transfers, the side thoracic support... pads can be raised and swung away. 2 1 Head and Neckrests 9

Side Thoracic Supports (S.T.S.) S.T.S. pads provide effective, comfortable lateral trunk support or anterior support. While some contouring is built into the design of the pad, it can be further adjusted to conform to an individual s thorax by hand shaping the metal insert. Width Height 434P1=1-7 (large) 7 1 16 (18cm) 4 5 16 (11cm) 434P1=2-7 (medium) 5 1 8 (13cm) 3 9 16 (9cm) 434P1=3-7 (small) 4 3 4 (12cm) 2 15 16 (7.5cm) A C B S.T.S. Rod Assembly - Regular Color Side 434F1=L Chrome Left 434F1=R Chrome Right 434F1=L-7 Black Left 434F1=R-7 Black Right Size A Size B Size C 2 15 16 (7.5cm) 315 16 (10cm) 3 9 16 (9cm) S.T.S. Rod Assembly - Extended A C B Color Side 434F2=L Chrome Left 434F2=R Chrome Right 434F2=L-7 Black Left 434F2=R-7 Black Right Size A Size B Size C 5 7 8 (15cm) 3 15 16 (10cm) 3 9 16 (9cm) S.T.S. Rod Assembly - Dropped Color Side 434F3=L.. Chrome Left 434F3=R Chrome Right 434F3=L-7 Black Left 434F3=R-7 Black Right A B C Size A Size B Size C 4 5 6 (11cm) 3 3 4 (9.5cm) 1 3 4 (4.5cm) 10 Thoracic Supports and Accessories

Custom Ball and Rod The custom ball and rod are designed for use with the Ottobock S.T.S. pads. This hardware can be bent and cut to fit to the pad for an individual user s requirements. A Color Size A 434F4 Chrome 18 1 2 (47cm) 434F4=7 Black 18 1 2 (47cm) Bending Tool The bending tool is used to produce a custom fixture for the S.T.S. 711S6.. Bending Tool S.T.S. Clamps This clamp attaches to any wheelchair without alteration. Please state tubing size when ordering. For accuracy, please contact wheelchair manufacturer for tubing size. For Ottobock wheelchairs, you need S.T.S. clamps for tube diameter 1 (2.5cm). Color Size/Tube Ø 434H1=7/8 Chrome 7/8 (2.2cm) 434H1=1 Chrome 1 (2.5cm) 434H1=3/4 Chrome 3/4 (1.9cm) 434H1=7/8-7 Black 7/8 (2.2cm) 434H1=1-7 Black 1 (2.5cm) 434H1=3/4-7 Black 3/4 (1.9cm) Front Mount This hardware is designed specifically for mounting S.T.S. pads on wheelchairs that have front mount upholstery. It can also be attached to a plywood or plastic base. The flat mount is also used with wrap-around upholstery. This application requires piercing the upholstery and installing one additional screw. Color 434H4=7042 Chrome 434H4=7 Black Thoracic Supports and Accessories 11

Channel Forearm Pads, Hand Pads and Armrests 1 Modular Channel Forearm Pad The channel forearm pad,. combined with the appropriate. hand pad, provides functional. support for individuals with upper... extremity weakness or paralysis. 2 Cone Type Modular Pad Support surface with built-in. cone for individuals with. high tone and more involved. positioning needs. Encourages... supination and external rotation. to assist with tone reduction.. 2 1 3 3 Elevating Swivel Unit for Channel Forearm Pads. The elevating swivel unit permits. the armrest to be positioned in. a variety of ways. 12 Head and Neckrests

Modular Flat Hand Pad Support surface for individuals with mild positioning needs, and/or to mount custom positioning shapes or support hand splints. Size 436P5=2-7 (medium) Length 7 1 16 (18cm) Width 4 1 2 (11.5cm) 436P5=1-7 (large) Length 9 1 16 (23cm) Width 5 1 2 (14cm) Palm Extensor Modular Pad Support surface with built-up palmar arch for mild to moderate positioning needs. Side Size 436P2=L2-7 (medium) Left Length 8 1 16 (20.5cm) 436P2=R2-7 Right Width 5 11 16 (14.5cm) 436P2=L1-7 (large) Left Legnth 9 1 4 (23.5cm) 436P2=R1-7 Right Width 5 11 16 (16.5cm) Horn Type Modular Pad Support surface with raised palmar arch support for moderate to severe positioning needs. Encourages slight supination for tone reduction. Side Size 436P3=L2-7 (small) Left Length 7 1 16 (18cm) 436P3=R2-7 Right Width 5 1 8 (13cm) Depth 3 1 8 (8cm) 436P3=L1-7 (large) Left Length 7 1 2 (19cm) 436P3=R1-7 Right Width 5 11 16 (14.5cm) Depth 3 9 16 (9cm) Cone Type Modular Pad Support surface with built-in cone for individuals with high tone and more involved positioning needs. Encourages supination and external rotation to assist with tone reduction. Side Size 436P4=L2-7 (small) Left Length 7 7 8 (20cm) 436P4=R2-7 Right Width 5 1 8 (13cm) Depth 2 3 4 (7cm) 436P4=L1-7 (large) Left Length 7 7 8 (20cm) 436P4=R1-7 Right Width 5 1 8 (13cm) Depth 3 9 16 (9cm) Channel Forearm Pads, Hand Pads and Armrests 13

Armrest and Handpad Strap Kit The hook and loop closure offers safety for patients whose upper extremity tends to slide out of the armrest or off the hand pad. The strap may be used with any of the forearm or hand components shown. 436S1=1-7 Size Length 20 1 16 (51cm) Width 1 (2.5cm) Elevating Swivel Unit for Channel Forearm Pads The elevation feature allows the armrest to be raised to 12 degrees or 25 degrees. The swivel feature allows the armrest to pivot freely in a wide arc or to be ositioned at approximately 15 degrees to 18 degrees and locked with a spring mounted pin. The elevating swivel unit facilitates transfers as it allows you to swing armrests and joy-sticks aside. Note: Armrest height will increase by 13 16 (3cm) when using the E.S.U. It is advisable to use height adjustable armrests to compensate for this. Color Tube Ø 476E52=SK040 Chrome 1 (2.5cm) 476E52=SK010 Chrome 3/4 (1.9cm) 476E52=SK030 Chrome 7/8 (2.22cm) 476E52=SK045 Black 1 (2.5cm) 476E52=SK015 Black 3/4 (1.9cm) 476E52=SK035 Black 7/8 (2.22cm) Channel Forearm Pad The channel forearm pads are available in three sizes and are designed for use with different styles of hand pads. The channel forearm pad, combined with the appropriate hand pad provides functional support for individuals with upper extremity weakness or paralysis. Any of the forearm and hand combinations can be mounted directly onto the armrest hardware of a standard wheelchair or on a swivel elevating unit. Size 436A2=3-7 (small) Length 8 1 16 (20.5cm) Width 4 1 8 (10.5cm) Depth 1 9 16 (4cm) Depth 1 (2.5cm) 436A2=2-7 (medium) Length 11 1 2 (29cm) Width 4 3 4 (1.2cm) Depth 1 3 4 (4.5cm) Depth 1 (2.5cm) 436A2=1-7 (large) Length 14 (35.5cm) Width 4 3 4 (12cm) Depth 1 3 4 (4.5cm) Depth 1 (2.5cm) 14 Channel Forearm Pads, Hand Pads and Armrests

One Piece Channel Forearm Pad Provides an optimal method of supporting a weak or paralyzed upper extremity where specific hand positioning is not required. Armrest can be mounted directly onto the hardware of a standard wheelchair armrest or an elevating swivel unit. 436A3=2-7 Size Length 18 1 18 (46cm) Width 4 3 4 (12cm) Depth 1 3 4 (4.5cm) Depth 1 (2.5cm) Wrap-Around Armrest Pad Available in two sizes and can be quickly mounted to standard wheelchair armrests. Regular and desk-length pads can be mounted on armrests with hole spacing of 8 7 8 or 3 3 8 (22.5cm or 8.5cm). 436A5=1-7 436A5=1-7 Size Length Width Length Width 14 3 16 2 3 4 10 1 4 2 3 4 (36cm), (7cm) (26cm) (7cm) Standard Armrests Pads Designed to replace damaged or uncomfortable armrest pads on standard wheelchairs. Regular length attaches to wheelchair armrests with hole spacing of 8 7 8 (225 mm), the desk length attaches to armrests with hole spacing of 3 3 8 (85 mm). 436A4=1-7 436A5=2-7 Size Length Width Length Width 14 3 16 2 3 8 10 1 4 2 3 8 (36cm), (6cm) (26cm) (6cm) Side Panel Armrest Pad, Waterfall Designed to replace a regular length armrest on a standard wheelchair with hole spacing of 8 7 8 (225 mm). 436A33=1-7 Size Length Width Height 14 3 16 3 9 16 7 7 8 (36cm), (9cm) (20cm) Offset Plate for Armrest Allows lateral positioning of entire modular armrest unit to the left or right, as required, by 13 16 (3cm). All Ottobock modular armrest pads can be attached to this unit. Mounts easily onto conventional wheelchairs with tube diameters of 3 4, 7 8, 1 (1.9cm, 2.22cm, or 2.54cm). Please state tube diameter when ordering. 436H1=7 Offset Plate for Armrest, Universal Channel Forearm Pads, Hand Pads and Armrests 15

Foot Buckets and Calf/Legrests 1 Calf/Legrest Pad The calf/legrest pads can. be attached to most wheelchairs. by using a 434H1 S.T.S. 1 2 Foot Bucket Cushions Foot bucket cushions provide comfortable,. safe support and are compatible with most... wheelchairs on the market. 2 16 Head and Neckrests

Calf / Legrest Pad The calf/legrest pads provide an ideal anatomic fit and are cushioned for maximum comfort. The pads attach to most wheelchairs by using a 434H1 S.T.S. clamp and 434F3 rod assembly. 440P2=1-7 Size Width 6 11 16 (17cm) Height 9 1 16 (23cm) Dropped S.T.S. Mounting Kit Color Side 434F3=L Chrome Left 434F3=R Chrome Right 434F3=L-7 Black Left 434F3=R-7 Black Right A B C Size A Size B Size C 4 5 16 (11cm) 3 3 4 (9.5cm) 1 3 4 (4.5cm) S.T.S. Clamps These clamps can be fastened to the wheelchair without alterations. Please state tubing size when ordering. For accuracy, please contact wheelchair manufacturer for tubing size. For Ottobock wheelchairs, you need S.T.S. clamps for tube diameter 1 (2.5cm). Color Tube Ø 434H1=3/4 Chrome 3 4 (1.9cm) 434H1=7/8 Chrome 7 8 (2.2cm) 434H1=1 Chrome 1 (2.5cm) 434H1=3/4-7 Black 3 4 (1.9cm) 434H1=7/8-7 Black 7 8 (2.2cm) 434H1=1-7 Black 1 (2.5cm) Foot Buckets and Calf/Legrests 17

Foot Bucket Shells Consisting of an ABS bucket and a soft polyurethane foam padding, foot buckets offer comfortable and secure support. They are mounted directly onto existing footplates of standard wheelchairs and can be used for either seating systems or wheelchairs. Padding and buckets must be ordered separately. Foot buckets come in two sizes (large and medium both with a 90 degree angle). Width Height Depth 440R9=2-7 (medium) 8 11 16 (22cm) 10 (25.5cm) 5 7 8 (15cm) 440R9=1-7 (large) 12 4 5 (32.5cm) 10 (25.5cm) 7 1 8 (18.5cm) Foot Bucket Cushions Foot bucket cushions are used with Ottobock seating systems or standard wheelchairs to provide comfortable and safe support. The cushion is made from a polyurethane foam that is contoured to comfortably position the foot. Width Height Depth 440C2=2-7 (medium) 8 11 16 (22cm) 10 (25.5cm) 5 7 8 (15cm) 440C2=1-7 (large) 12 4 5 (32.5cm) 10 (25.5cm) 7 1 8 (18.5cm) Abductor In combination with the mounting kit, the abductor can be flipped down by pressing the push button. It can only be attached to firm seat frames or seat plates. Width Height Depth 446C1=1-7 3 (13.5cm) 3 15 16 (10cm) 3 15 16 (10cm) Mounting Kit for Abductor 438H2 Mounting Kit for Abductor 18 Foot Buckets and Calf/Legrests

Wheelchair Cushions and Backs Aerial, Aquos and Terra are a new series of lightweight cushions featuring unique rest suspension and reticulated foam developed by and exclusively available through Ottobock. 1 Darlexx cover with four-way stretch and wrap-around ergonomic zipper. 2 Reticulated Foam Comfortable, anatomically correct. preshaped foam with waterfall front edge. 1 2 3 3 BREATHAIR BREATHAIR technology promotes. air movement reducing heat and moisture. build-up without minimizing comfort.

Aerial Cushion Provides superior positioning, skin protection, stability and comfort Ottobock s unique breathable reticulated foam and BREATHAIR technology promotes air movement reducing heat and moisture buildup without minimizing comfort The lightweight Aerial is the perfect combination with an ultra lightweight wheelchair 476C00=SK706 476C00=SK701 476C00=SK704 476C00=SK707 476C00=SK703 476C00=SK702 476C00=SK705 Size 15 x 16 (38.1cm x 40.6cm) 16 x 16 (40.6cm x 40.6cm) 16 x 18 (40.6cm x 45.7cm) 17 x 18 (43.2cm x 45.7cm) 18 x 16 (45.7cm x 40.6cm) 18 x 18 (45.7cm x 45.7cm) 20 x 18 (50.8cm x 45.7cm) Technical Specifications PDAC Code: E2624 Skin Protection,. Positining, and. Adjustable Weight: 1.74 lbs Product Height: 3.5 from Lateral Edge Weight Capacity: 300 lbs.(140kg) Aquos Cushion Provides skin protection and positioning for users at moderate to high risk of skin breakdown The LiquiCell inserts in the cover help reduce shear forces and help maintain skin integrity without compromising stability Made from Ottobock s unique rest suspension foam, the Aquos cushion keeps its shape and prevents bottoming out 476C00=SK656 476C00=SK651 476C00=SK654 476C00=SK657 476C00=SK653 476C00=SK652 476C00=SK655 Size 15 x 16 (38.1cm x 40.6cm) 16 x 16 (40.6cm x 40.6cm) 16 x 18 (40.6cm x 45.7cm) 17 x 18 (43.2cm x 45.7cm) 18 x 16 (45.7cm x 40.6cm) 18 x1 8 (45.7cm x 45.7cm) 20 x 18 (50.8cm x 45.7cm) Technical Specifications PDAC Code: E2607 Skin Protection and Positioning Weight: 2.5 lbs Product Height: 3.5 from Lateral Edge Weight Capacity: 300 lbs (140kg) Terra Cushion Provides skin protection and positioning for users at moderate to high risk of skin breakdown Ultra lightweight cushion that keeps its shape and reduces the likelihood of bottoming out Ottobock s unique rest suspension foam helps to absorb shock and dampen vibrations Size Technical Specifications 476C00=SK606 476C00=SK601 476C00=SK604 476C00=SK607 476C00=SK603 15 x 16 (38.1cm x 40.6cm) 16 x 16 (40.6cm x 40.6cm) 16 x 18 (40.6cm x 45.7cm) 17 x 18 (43.2cm x 45.7cm) 18 x 16 (45.7cm x 40.6cm) PDAC Code: Weight: Product Height: E2607 Skin Protection and Positioning 1.8 lbs 3.5 from Lateral Edge 476C00=SK602 18 x 18 (45.7cm x 45.7cm) Weight Capacity: 300 lbs (140kg) 20 Wheelchair Cushions and Backs 476C00=SK605 20 x 18 (50.8cm x 45.7cm)

ComforT Cushion The ComforT cushion by Ottobock offers state-of-the-art temperature management capability through the presence of a licensed Phase Change Material (PCM). The Phase Change Material absorbs heat and keeps the seat interface up 10F (6C) cooler than other ordinary wheelchair cushions. ComforT cushion delivers superior stability and full immersion for optimal seating. Cushion comes with a moisture repellent cover. 476C00=CMT 476C00=CMT 476C00=CMT 476C00=CMT 476C00=CMT 476C00=CMT 476C00=CMT 476C00=CMT 476C00=CMT Size 14 x 14 (35.5cm x 35.5cm) 14 x 16 (35.5cm x 40.6cm) 16 x 16 (40.6cm x 40.6cm) 16 x 18 (40.6cm x 45.7cm) 17 x 18 (43.2cm x 45.7cm) 18 x 16 (45.7cm x 40.6cm) 18 x 18 (45.7cm x 45.7cm) 20 x 16 (50.8cm x 40.6cm) 20 x 18 (50.8cm x 45.7cm) Cloud Cushion The Cloud has been designed for users who need maximum positioning and pressure relief. Building on the Floam base, the seat surface is divided into Floam Cells of varying volume. This allows the greatest amount of contact to be achieved and effectively reduces the amount of pressure. By simply exchanging the Floam Cells, the Cloud cushion can be quickly customized to accommodate specific user needs. The Cloud cushion is delivered with a water repellent cover. The Cloud cushion is also available in custom sizes and configurations. Size 476C00=FFC 12 x 12 (30.5cm x 30.5cm) 476C00=FFC 14 x 14 (35.5cm x 35.5cm) 476C00=FFC 14 x 16 (35.5cm x 40.6cm) 476C00=FFC 15 x 16 (38.1cm x 40.6cm) 476C00=FFC 16 x 16 (40.6cm x 40.6cm) 476C00=FFC 16 x 18 (40.6cm x 45.7cm) 476C00=FFC 17 x 18 (43.2cm x 45.7cm) 476C00=FFC 18 x 16 (45.7cm x 40.6cm) 476C00=FFC 18 x 18 (45.7cm x 45.7cm) 476C00=FFC 20 x 16 (50.8cm x 40.6cm) 476C00=FFC 20 x 18 (50.8cm x 45.7cm) 476C00=FFC 22 x 16 (55.9cm x 40.6cm) 476C00=FFC 24 x 16 (61.0cm x 40.6cm) 476C00=FFCCUSTOM Custom *Cushion thickness approximately 10cm. Wheelchair Cushions and Backs 21

Advantage Cushion Designed for the active user, the Advantage cushion provides all the protection and stability of a Cel Pak design with the lowest possible weight and profile. The Advantage cushion is also available in custom sizes and configurations. Size 476C00=AC 14 x 14 (35.5cm x 35.5cm) 476C00=AC 14 x 16 (35.5cm x 40.6cm) 476C00=AC 15 x 16 (38.1cm x 40.6cm) 476C00=AC 16 x 16 (40.6cm x 40.6cm) 476C00=AC 16 x 18 (40.6cm x 45.7cm) 476C00=AC 17 x 18 (43.2cm x 45.7cm) 476C00=AC 18 x 16 (45.7cm x 40.6cm) 476C00=AC 18 x 18 (45.7cm x 45.7cm) 476C00=AC 20 x 16 (50.8cm x 40.6cm) 476C00-AC 20 x 18 (50.8cm x 45.7cm) 476C00=AC 22 x 16 (55.9cm x 40.6cm) 476C00=AC 24 x 16 (61.0cm x 40.6cm) 476C00=ACCUSTOM Custom 476C00=FFCCUSTOM Custom *Cushion thickness approximately 8cm. Floam Cells Allows for cushion customization, changing density as dictated by anatomy and positioning needs. *Cushion thickness approximately 9 15/16 (10cm). Floam Cells Cloud/Advantage Cushion Color Size Size Blue Small (lowest density) 477C00=CP75 Small Black Medium (medium density) 477C00=CP100 Medium Red Large (highest density) 477C00=CP125 Large ComforT Cushion Back 4 Size Size 477C00=CPCT41 Small 477C00=CPP20 Small 477C00=CPCT62 Medium 477C00=CPP25 Medium 477C00=CPCT82 Large 477C00=CPP30 Large 22 Wheelchair Cushions and Backs

Ottobock s Adjustable Seat The Adjustable Seat offers a smart approach to drop seat design. Constructed of advanced composites, the seat is up to 50 percent lighter than competitive products, yet provides superior durability and adjustability. A single size accommodates wheelchairs from 14 to 20 in width and cushion lengths from 14 to 18. Width adjustments are made from the top with a Phillips screwdriver. These adjustments also provide up to 2 of drop or up to 1 1/2 of lift. Size 476C01=DS 14-18 (35.5cm - 45.75cm) Suitable for Chairs 15 3/4-20 (40cm - 50cm) Length of Plate* 17 1/2 (44.5cm) Seat Depth 16 1/2-18 (42cm - 46cm) Cushion Length 15-20 (38cm - 51cm) Seat Height Adjustment** -2-1 1/4 (-5cm up to + 3.5cm) Inclination Angle 11 *..A large seat width may require an additional firm seat plate and more space. ** Dependent on crossbrace design Rigid Plywood Bases Plywood insert fits within the cushion cover to supplement a sling seat and provide a solid base. The insert is lightweight, flex-resistant and has a special moisture-resistant coating. We offer twelve standard sizes and we will also make a rigid plywood base in a custom size. 476C00=PLY 476C00=PLY 476C00=PLY 476C00=PLY 476C00=PLY 476C00=PLY 476C00=PLY 476C00=PLY 476C00=PLY 476C00=PLY 476C00=PLY 476C00=PLY 476C00=PLYCUSTOM Size 12 x 12 (30.5cm x 30.5cm) 14 x 14 (35.5cm x 35.5cm) 14 x 16 (35.5cm x 40.6cm) 15 x 16 (38.1cm x 40.6cm) 16 x 16 (40.6cm x 40.6cm) 17 x 18 (43.2cm x 45.7cm) 18 x 16 (45.7cm x 40.6cm) 18 x 18 (45.7cm x 45.7cm) 20 x 16 (50.8cm x 40.6cm) 20 x 18 (50.8cm x 45.7cm) 22 x 16 (55.9cm x 40.6cm) 24 x 16 (61.0cm x 40.6cm) Custom Wheelchair Cushions and Backs 23

Back 1 Ottobock s Back 1 was designed for users who need only mild lateral support and have a wide range of upper body motion. 476D10=RA15-17 476D10=RA18-20 Size 15-17 (28cm - 44cm) 18-20 (46cm - 52cm) Back 2 Ottobock s Back 2 was designed for active users who benefit from gentle positioning and need a wide range of upper body motion. The Back 2 features a series of horizontal Floam cell compartments for pressure distribution. A pocket is provided behind the Floam pad to insert lumbar or sacral supports. Back 2 is available in two sizes. Each size can be adjusted to three different widths. The narrow size fits 15 to 17 chairs (factory set at 16 ). The standard size fits 18 to 20 chairs (factory set at 18 ). 476D20=AR15-17 476D20=AR18-20 Size 15-17 (38cm - 44cm) 18-20 (46cm - 52 cm) Back 3 Ottobock s Back 3 is ideal for involved users who require aggressive upper body support. The back s center has Floam cell compartments for pressure management. The extended plastic lateral supports are foam covered and heat moldable so they can be modified in the field, if necessary. The laterals come in a standard shape or a teardrop shape. With Standard Laterals With Tear Drop Laterals Size Size 476D30=ARD 15-17 (28cm - 44cm) 476D30=ARTD 15-17 (28cm - 44cm) 476D30=ARD 18-20 (46cm - 52cm) 476D30=ARTD 18-20 (46cm - 52cm) Back 4 Ottobock s Back 4 features a center-mounted Cel-Pak and is photographed without a cover to show the Cel Pak. Made of double stretch and is Lycra, the Cel-Pak holds the Floam cells with varying volumes of Floam. By simply exchanging one cell for another, you can create almost limitless combinations to fit your patient s needs. The variety of custom options makes this back ideal for involved users. With Standard Laterals With Tear Drop Laterals Size Size 476D40=AR4D 15-17 (38cm - 44cm) 476D40=AR4TD 15-17 (38cm - 44cm) 476D40=AR4D 18-20 (46cm - 52cm) 476D40=AR4TD 18-20 (46cm - 52cm) 24 Wheelchair Cushions and Backs

NUTEC Seating and Positioning Aids NUTEC s innovative modular design allows components to be exchanged or adjusted. between seating solutions. A plethora of hardware components complete the line,. making each solution as unique as the individual using it. 1 Headrests NUTEC headrests offer a variety of shapes and... support options for the perfect support combination. 1 2 Seats and Backs Various seat and back modification options ensure individualized custom positioning.. 2 3 3 Trunk Support Optimized postural support can. be individualized with NUTEC's. intelligent hardware.

Solid Seats, Backs and Packages NUTEC seating is a highly customizable and adjustable system with incredible options. These solutions work for kids or adults who have specific positioning requirements and will fit with a wide variety of mobility bases and accessories. 1 1 NUTEC can be personalized with. an embroidered name or picture.. 2 2 Various seat and back. modification options ensure. individualized positioning.. Seating depth, width and height. are adjustable to accommodate. user s changing needs...

Basic Insert Package with Knob Release Hardware Basic inserts are made from nine ply high strength wood bases, quality foams and/or gel materials and a large variety of upholstery fabrics to meet the needs of your clients. We offer our basic inserts in a variety of configurations that include the seat insert, the back insert, a seat-to-back bracket as well as all the attaching hardware. Seats are cut full width and backs are between the backposts unless specified. Standard foams are 1 1/2 high density on the seat and 1 high density on the back. Size 470C49=SS100 14. and smaller 470C49=SS100-S 14. and smaller 470C49=SS100-B 14. and smaller 470C49=SS101 15. and wider 470C49=SS101-S 15. and wider 470C49=SS101-B 15. and wider 470C49=SS102 Basic Insert Package with Knob Hardware and Seat-to-Back Bracket Solid Seat with Knob Hardware and Seat-to-Back Bracket Bottom Solid Back with Knob Hardware and Seat-to-Back Bracket Top Basic Insert Package with Knob Hardware and Seat-to-Back Bracket Solid Seat with Knob Hardware and Seat-to-Back Bracket Bottom Solid Back with Knob Hardware and Seat-to-Back Bracket Top Basic Insert Package with Gel Seat Insert, Knob Hardware and Seat-to-Back Bracket Basic Insert Package with Hook Hardware Basic inserts are also available with hook style hardware if requested. The seat and back are connected with a seat-to-back bracket which allows for easy seat depth adjustments with the simplicity of traditional hook style hardware. Size 470C49=SS103 14. and smaller 470C49=SS104 15. and wider Basic Insert Package with Adjustable Drop Hook Hardware and Seat-to-Back Bracket Basic Insert Package with Adjustment Drop Hook Hardware and Seat-to-Back Bracket Basic Insert Package with Velcro on Seat and Knob Release Back Another option for basic inserts is to attach the seat with Velcro style fastener and to use the highly adjustable knob release hardware on the back to facilitate removing the basic insert from the mobility base. This option is also useful for powerdrive wheelchairs with limited under seat space and an existing seat pan or upholstery. Size 470C49=SS103 14. and smaller 470C49=SS104 15. and wider Basic Insert Package with Velcro on Seat, Knob Release Back and Seat-to-Back Bracket Basic Insert Package with Velcro on Seat, Knob Release Back and Seat-to-Back Bracket Planar Packages 27

Mini Insert Package with Knob Release Hardware Miniature basic inserts are made in a scaled down size to fit 10 to 12 wide frames. They are made of 3/8 high strength plywood and have miniature knob release hardware. Most options and modifications are available. Miniature trunk and hip support hardware is also available. Size 470C49=SS107-S 10-12. wide 470C49=SS107-B 10-12. wide 470C49=SS107 10-12. wide Mini Solid Seat with Knob Hardware and Seat-to-Back Bottom Bracket Mini Solid Back with Knob Hardware and Seat-to-Back Top Bracket Mini Insert Package with Mini Knob Hardware and Seat-to-Back Bracket Solid Seat Insert These seat inserts can sit on top of existing seat upholstery or attach with separate hardware. A 1/2 nine plywood base and 1 of high density foam are standard. A variety of covering materials are available. Velcro bottom available upon request. Model SSI101 has T-nuts for hardware attachment. Size 470C49=SSI16W 16 x 16 Solid Seat Insert (sits on top of standard upholstery) 470C49=SSI18W 18 x 16 Solid Seat Insert (sits on top of standard upholstery) 470C49=SSI100 Custom Solid Seat Insert (sits on top of standard upholstery) 470C49=SSI101 Solid Seat Insert with T-nuts. (requires additional hardware) 470C49=SSI102 over 18 x 18 Solid Seat Insert Solid Seat with Flush Mount Hooks Solid seats are fabricated from 1/2 high strength plywood, 1 high density foam and a large selection of covering materials. Several hardware options are available. 470C49=SFH100 Solid Seat with Flush Mount Drop Hooks (for full width seats) Solid Seat with Drop Hooks 470C49=SFH101 Solid Seat with 1 Drop Hooks (for between rail mounting only) 470C49=SFH102 Solid Seat with 2 Drop Hooks (for between rail mounting only) 28 Planar Packages / Planar Seats

Solid Seat with Adjustable Drop Hooks 470C49=SAH100 Solid Seat with Adjustable Drop Hooks. (between the rail standard - full width optional) Solid Seat with Knob Release Hardware 470C49=SKR100 Solid Seat with Knob Release Hardware - 2 pair Plastic Drop Base with Flush Mount Drop Hooks Drop bases are constructed from 1/2 black polypropylene and have hook fastener installed to secure cushions. They are available for most single crossbrace wheelchairs up to 22 wide. For frame widths wider than 22 or for dual crossbraces, 3/4 HD plywood will be substituted and an upcharge for 'heavy duty' option will be added. Black vinyl is standard with the heavy duty construction. Hook Velcro on top is standard. 470C49=DBF100 Plastic Drop Base with Flush Mount Drop Hooks. (for full width seats) Plastic Drop Base with Drop Hooks 470C49=DBF101 Plastic Drop Base with 1 Drop Hooks (for between rail mounting) 470C49=DBF102 Plastic Drop Base with 2 Drop Hooks (for between rail mounting) Plastic Drop Base with Adjustable Drop Hooks 470C49=DBA100 Plastic Drop Base with Adjustable Drop Hooks Planar Seats 29

Anti-Thrust Seat Modification The anti-thrust seat modification helps improve sitting posture by decreasing posterior pelvic tilting of the pelvis. It also may help decrease extensor tone. 470C49=ATSM 470C49=AATSM Anti-Thrust Seat Modification Adjustable Depth Anti-Thrust Seat Modification Contoured Seat Modification The contoured seat modification has built-in adductors, abductor and an ischial recess. This modification keeps the pelvis and thighs in proper position. Contoured seats can be done as generic or custom. 470C49=CSM 470C49=AATCSM Contoured Seat Modification Adjustable Depth Contoured Anti-Thrust Seat Built-in Medial Thigh Support This modification helps properly position the thighs by limiting medial movement of the distal thigh. 470C49=BIMTS Built-in Medial Thigh Support (abductor) Built-in Lateral Thigh Supports This modification is designed to decrease excessive hip abduction and prevent the lateral aspect of the distal thigh from contacting the armrest or legrest of the wheelchair. 470C49=BILS Built-in Lateral Supports (adductors) Asymmetrical Seat Depth The asymmetrical seat depth modification provides for differences in thigh (femur) length and/or helps accommodate for non-correctable pelvic rotation. 470C49=ASD Asymmetrical Seat Depth 30 Planar Seat Modifications

Grid Seat Modification This seat modification adds foam blocks that can be modified for pressure relief or to accommodate boney prominences. The blocks are attached to the seat with hook and loop fastener. The standard Darlexx cover is fully removable to allow complete access for modifications. Special foams and thicknesses are available. 470C49=GSM Grid Seat Modification I-Seat Modification These cut out areas allow additional adjustment of lateral hip and thigh support brackets. 470C49=ISM I-Seat Modification Wedge Seat Foam Modification Standard wedge seats (AP - front higher) help prevent anterior pelvic tilt and can decrease extensor tone by increasing hip flexion. The reverse wedge (AP - rear higher) can help properly position the pelvis and facilitate coming to standing. Lateral wedges can accommodate some pelvic obliquities. Please specify foam thickness and direction if other than standard. 470C49=WSF Wedge Seat Foam Modification Laterally Split Seat Modification Can be used to accommodate for hip flexion range of motion limitations. Allows user to sit more vertically. Works best with knob hardware. Covers can be three separate pieces (shown) or one piece. 470C49=LSS Laterally Split Seat with Adjustable Hip Flexion Angle Planar Seat Modifications 31

Pelvic Obliquity Modification This modification gives the Seating Specialist the ability to independently adjust the height of each side of the pelvis on obliquities that can be reduced. It also gives the ability to accommodate and equalize pressures on clients with fixed obliquities. It can also be used as a "pelvic well" to reduce sitting pressures under the pelvis. Another use is to place speciality foams directly under the ischial tuberosities to decrease sitting pressure and increase user comfort. This modification is supplied with several different types of polyurethane and viscoelastic foams. Please specify overall foam thickness. 2 foam thickness is standard and the minimum thickness recommended. 470C49=POM Pelvic Obliquity Modification Waterfall Front Seat Modification (not pictured) 470C49=WFSM Waterfall Front Seat Modification Foam-in-Place Seat Modification The foam-in-place seat modification has built-in ABS (plastic) laterals to provide support during the foaming process. 1 1/4 viscoelastic foam is included to ensure that adequate pressure relief is attained. Dual side mount zippers allow easy access to pour the foam. A bag pack of soft liquid sunmate foam is standard. Bowl packs are available as a no charge option. One unit of foam is standard - additional foam available. Clinician must have FIP experience. 470C49=FIPS Foam-in-Place Seat Modification Incontinent Liner - Spray On This special coating helps prevent moisture from entering the foam and wood base. The pressure relieving qualities of the foam are not affected so the cushioning remains comfortable and moisture resistant. Coating is a latex free material. 470C49=SOL 470C49=BIC Incontinent Liner - Spray On Incontinent Liner - Sewn On - Blue with Zipper 32 Planar Seat Modifications

Gel Seat Modification This modification adds a gel insert under the pelvis to decrease sitting pressures and increase user comfort. 470C49=GELS Gel Insert / Overlay in Seat Additinal Seat Fabrication Modifications 470C49=RSC Removable Secondary Cover - Grid Style 470C49=AFCM Spacer Fabric Cover Modification 470C49=ECM Extra Cover Modification 470C49=HDC Heavy Duty Construction 470C49=ASF Additional Standard Foam Per 1/2 470C49=SFSM Spec Foam - Sunmate Per Inch 470C49=SFTF Spec Foam T- Foam Per Inch 470C49=PF1 Pudgee Foam - Per Inch 470C49=PF2 Pudgee Foam - 2 470C49=NOTCH Notch for Back Posts 470C49=VL2 AEL Versa Lock Clips in Lieu of Horse Shoe Clips - 1 Pair 470C49=VL4 AEL Versa Lock Clips in Lieu of Horse Shoe Clips - 2 Pairs Solid Back Insert Solid back inserts are made with 1/2 high strength plywood, 1 high density foam and a large selection of covering materials. They are designed to fit in front of standard back upholstery and have loops for attachment to the backpost (except SBI101 which requires additional hardware to install on the wheelchair frame). Size 470C49=SBI13W 13 Width x 18 Height Solid Back Insert. (fits most 16 wide wheelchairs) 470C49=SBI15W 15 Width x 18 Height Solid Back Insert. (fits most 18 wide wheelchairs) 470C49=SBI100 Custom Solid Back Insert. (fits in front of back upholstery) 470C49=SBI101 Solid Back Insert with T-nuts. (requires additional hardware) Solid Back with Flush Mount Hooks Our solid seats with hardware replace standard wheelchair upholstery. They provide a solid base to improve sitting posture and serve as a platform for the attachment of other positioning components. The usual construction is 1/2 nine ply high quality wood bases, 1 1/2 high density foam and premium covering materials. Hardware choices include fixed drop hooks, adjustable height and angle hooks or knob release hardware. Please specify between seat rail or full width mounting. 470C49=BFH100 Solid Back with Flush Drop Hooks (full width back in front of back posts) Planar Seat Modifications / Planar Backs 33

Solid Back with Drop Hooks 470C49=BFH 101 Solid Back with 1 Drop Hooks (mounts between back posts) 470C49=BFH 102 Solid Back with 2 Drop Hooks (mounts between back posts) Solid Back with Adjustable Hook Hardware 470C49=BAH100 Solid Back with Adjustable Drop Hooks (between the rail is standard, full width is optional) Solid Back with Knob Hardware This solid back comes complete with two pair of our premium knob release brackets. This bracketry provides maximum durability and adjustability. It can be adjusted to accommodate a range of seat depths and seat-to-back angles. 470C49=BKR100 Solid Back with Knob Release Hardware - 2 Pair Curved Back Modification This modification uses laminated hardwood that is formed into a gentle curve. The curved back gives increased user contact which increases user comfort and improves lateral stability. 470C49=CURVE Curved Back Modification (curved wood available to 22 wide) Curved by Foam Back Modification This modification uses a flat plywood base and curved foam to provide increased user comfort and improved lateral support. Can be used with all dynamic options as well as with all other back modifications. 470C49=CBF Curved by Foam Modification (flat wood and curved foam) Contoured Back Modification This modification has built-in lateral supports and a built-in adjustable height lumbar support. The contoured back modification helps improve sitting tolerance by increasing user comfort. The standard cover has a four way stretch interface surface and is zippered for easy access when adjustments are necessary. 470C49=COBM Contoured Back Mod (built-in laterals and lumbar support) 34 Planar Backs / Planar Back Modifications

I-Back / T-Back Back Modification These modifications have cut out areas that allow for increased adjustment of lateral supports. It is especially useful for between the backpost backs and backs that are significantly wider than the user's chest width. 470C49=IBM 470C49=TBM I-Back Modification T-Back Modification Lateral Control Back Modification This modification usually consists of a main center panel that has the mounting hardware and two hinged thoracic supports on each side. These lateral supports can be adjusted to provide optimal thoracic support. Available as a standard configuration or as an upcut configuration that allows for use with lateral hip supports. 470C49=LCBM Lateral Control Back Modification Biangular Back Modification This back modification consists of upper (thoracic) and lower (pelvic) sections that are connected with adjustable angle hardware. This assembly is then covered with one piece of foam and one upholstered cover to provide a smooth interface surface. This modification helps promote a more upright sitting posture and increases sitting tolerance. 470C49=BBM Biangular Back Modification with Adjustable Angle Rotational Biangular Back Modification This back modification has an upper and lower section that are upholstered separately. These sections are connected by a pair of our multi-axis rock-n-lock brackets. This allows not only conventional biangular adjustability but also the ability to have independent rotational adjustments of the upper and lower sections. 470C49=RBBM Rotational Biangular Back Modification Planar Back Modifications 35

Lumbar Roll Foam Back Modification The foam lumbar roll helps provide lumbar support for the wheelchair user. It comes with two different profiles of lumbar rolls or you can send a sketch for custom sizes. A zippered cover provides access for adjusting the height of the support. 470C49=LRF Lumbar Roll - Foam Lumbar Roll with Hardware This modification allows external adjustment of both the height and the anterior/posterior movement of the lumbar roll while the user is seated in the chair. Once the proper adjustment is attained, the secondary knobs lock the support in place. Please give range for vertical (height) adjustment desired. 470C49=LRH Lumbar Roll with Hardware Grid Back Modification This back modification allows the clinician to fabricate a custom contoured back at the time of the initial fitting. The standard cover is a four way stretch material that allows maximum contouring as well as pressure relief. Standard foam grids are 2 thick HR foam. Other foam types and thicknesses are available. 470C49=GBM Grid Back Modification Spinal Relief Cut-Out This option has a cut-out area to help decrease pressure over the spnous processes. Standard cut-out is 3 wide and 1 deep. Cut-out areas can also be filled with a softer foam to provide support while minimizing the pressure over the spine. 470C49=SPRCO 470C49=SR61 Spinal Relief Cut-Out Spinal Relief Gel Insert Wedge Cut Back Foam (not pictured) 470C49=WBF Wedge Cut Back Foam 36 Planar Back Modifications

Scapular Relief Cut-Out (not pictured) 470C49=SCRCO Scapular Relief Cut-Out Foam-in-Place Back Modification This modification utilizes a plywood base and ABS laterals that allow the backs to be made to any height or width specification. The interface surface uses a four way stretch material for maximum contouring. The cover has a zipper at the top for easy access. Comes complete with soft liquid sunmate chemicals to make a custom molded back. One unit of soft sunmate bag pack is standard. Bowl packs are available as a no charge option. Other foams and quantities are available upon request. Clinicians must have FIP experience. 470C49=FIPB Foam-in-Place Back Modification - Built-in ABS. Lateral Supports Low Profile Foam-in-Place (not pictured) This modification can be used to provide a custom contoured back for clients that do not require aggressive contouring or built-in lateral supports. Comes complete with foam chemicals - one unit of soft liquid sunmate. The bag pack is standard and the bowl pack is a no charge option. Clinicians must have FIP experience. 470C49=FIPBLP Low Profile Foam-in-Place Foam-in-Place Chemicals (not pictured) 470C49=FIPBOWL Foam-in-Place Chemicals - Soft Bowl Pack 470C49=FIPBAG Foam-in-Place Chemicals - Soft Bag Pack - 1 Unit 470C49=NT-90093 Foam-in-Place Chemicals - Soft Bag Pack - 1 1/2 Unit Planar Back Modifications 37

Additional Back Fabrication Modifications 470C49=SOL Incontinent Liner - Spray On 470C49=BIC Incontinent Liner - Sewn On - Blue with Zipper 470C49=AFCM Spacer Fabric Cover Modification 470C49=RSC Removable Secondary Cover - Grid Style 470C49=GELB Gel Insert / Overlay in Back 470C49=ECM Extra Cover Modification 470C49=SFSM Spec Foam - Sunmate Per Inch 470C49=SFTF Spec Foam - T-Foam Per Inch 470C49=PF1 Pudgee Foam - Per Inch 470C49=PF2 Pudgee Foam - 2 470C49=BELTSLOTS Slots for Upper Chest Belts 38 Planar Back Modifications

Headrests and Hardware NUTEC offers a wide variety of pad configurations. and hardware styles for the perfect support combination. 1 Pads can be adjusted and specially modified to individual head shapes, promoting functional positioning. 1 2 2.Dynamic headrest modifications are also available and allow for shock absorption and the greatest freedom of movement. 3 3 From the rock-n-lock to flip-down hardware. a series of superior options are available to. accommodate transfers and changing user. needs throughout the day.

Headrest Pad - Combination Molded 471C49=HR-COPAD Headrest Pad - Combination Molded Size Width Height Concavity Small 8 3 3/4 2 Large 10 5 3/4 3 Combination 6 5 3 Molded Headrest Pads These pads are molded from self skinning polyurethane foam for maximum durability and have a metal insert for strength. Pads will fit rock-n-lock or multi-axis hardware. Available in black only. Three sizes available. 471C49=HR-COPAD 471C49=HR-SMPAD Headrest Pad - Large Molded.. Headrest Pad - Small Molded Size Width Height Concavity Small 8 3 3/4 2 Large 10 5 3/4 3 Combination 6 5 3 Concave Pad The concave pad provides good posterior support while allowing users with some head control the ability to move laterally and rotate. Available in custom sizes upon request. 471C49=HR-CPAD Headrest Pad - Concave Size Width Height Small 6 (inside) 3 Medium 7 1/2 4 Large 9 4 Adjustable Concave This headrest consists of three internally hinged sections that are covered by a single foam pad and cover. Inside width is adjustable from 4 to 11 wide. Overall height is 3 1/2. A 3/16 Hex Key is included for adjustment. A stretch cover is recommended for maximum adjustabliity. 471C49=HR-ACPAD Headrest Pad - Adjustable Concave 40 Headrests

Komfi Fit Pad This uniquely shaped headrest pad provides exceptional posterior and lateral head support. 1 1/2 of soft viscoelastic foam allow the pad to contour to the users head. Ear cut outs provide increased comfort and do not interfere with hearing. Standard Darlexx cover provides air circulation and water resistance. 471C49=HR-KFPAD Headrest Pad - Komfi Fit Three Pad This headrest has a center pad and two lateral pads. It provides both posterior and lateral support. A high strength aluminum bracket securely holds the side pads at a 120 degree (60 degree) angle from the center pad. Available in three standard and in custom sizes. 471C49=HR-3PPAD Headrest Pads Only for 3 Pad Headrest Size Left Pad Center Pad Right Pad Small 3 Height x 3 Depth 3 Height x 4 Width 3 Height x 3 Depth Medium 4 Height x 4 Depth 4 Height x 5 Width 4 Height x 4 Depth Large 5 Height x 5 Depth 5 Height x 6 Width 5 Height x 5 Depth Three Pad Hinged This headrest is similar to the three pad headrest but offers the the ability to adjust the angle of the lateral pads. This allows the clinician to adjust the headrest for optimal head support for each client. Available in custom and three standard sizes. 471C49=HR-3PHPAD Headrest Pads Only for Three Pad Hinged Headrest Size Left Pad Center Pad Right Pad Small 3 Height x 3 Depth 3 Height x 4 Width 3 Height x 3 Depth Medium 4 Height x 4 Depth 4 Height x 5 Width 4 Height x 4 Depth Large 5 Height x 5 Depth 5 Height x 6 Width 5 Height x 5 Depth The Belled Pad The belled pad is designed to keep the client's head in front of the pad and to make it more difficult for the client to hook their head around behind the headrest. This pad is usually ordered wider than a standard pad. 471C49=HR-BLPAD Headrest Pad - Belled Headrests 41

Lateral Control Pad This pad provides good posterior and lateral support. The low profile sides do not block the users field of vision. Comes standard with a built-in occipital contour. 471C49=HR-LCPAD Headrest Pad Only for Lateral Control Headrest Size Width Height Small 6 5 1/2 Medium 7 1/2 6 1/4 Large 9 7 Headrest Modifications Molded Headrest Covers These artificial sheepskin covers are available for molded headrests. They provide a more comfortable support surface and extend the life of the headrest. 471C49=HRM-SCS 471C49=HRM-SCL 471C49=HRM-SCC Artificial Sheepskin Cover for Small Molded Headrest Artificial Sheepskin Cover for Large Molded Headrest Artificial Sheepskin Cover for Combination Headrest/Neckrest Occipital Contour Modification This modification adds a contoured occipital build up to increase contact area and provide improved user comfort. 471C49=HRM-OC Occipital Contour Modification Plush Pad Modification This modification adds 1 of soft sunmate foam in an extra removable cover to decrease interface pressure increasing user comfort. 471C49=HRM-PLUSH Plush Pad Modification - Adds 1 Soft Sunmate Foam Lateral Cut-Out Modification These cut-outs help improve the wheelchair user's field of vision. Available on the three pad and three pad hinged pads only. 471C49=HRM-LCO Lateral Cut-Out 42 Headrests / Headrest Modifications

Multi-Axis Ball to Rock-n-Lock Modification This adapter gives an added dimension of adjustability to any rock-n-lock headrest. It allows the pad to move in all directions and can be used with all pad styles we offer. 471C49=HRM-RLMA Multi-Axis Ball Added to Any Rock-n-Lock Headrest Dynamic Headrest Modification This modification can be done to any headrest that we offer with rock-n-lock hardware. It has a spring loaded mechanism that helps absorb shock caused by head banging behavior or by excessive extensor tone. Soft, medium and firm spring tensions available. The dynamic mechanism is shrouded to help protect hands and hair. Mechanism has 1 1/2 of mechanical travel. 471C49=HRM-DYM Dynamic Headrest Modification - Add to Rock-n-Lock Hardware Clinical Headrest Mount - Clamps (not pictured) 471C49=HR-CHM Clinical Headrest Mount - Clamp to Push Handles 471C49=HR-CHM78 Clinical Headrest Mount - Clamp to 7/8 Back Posts 471C49=HR-CHM88 Clinical Headrest Mount - Clamp to 1 Back Posts Depth Adjustable Bracket This heavy duty bracket is very durable and allows adjustment in three directions. Accepts all pads except molded headrests. 471C49=HR-DABRKT Depth Adjustable Headrest Bracket - Complete Direction Vertical Up to 5 Anterior /Posterior Up to 7 Flexion/Extension Up to 30 Headrest Modifications / Headrest Hardware 43

Rock-n-Lock Headrest Bracket This unique bracket allows maximum adjustability and excellent durability. It's multi-articular hardware allows adjustments in all directions. The standard bracket can accommodate heads that are up to 5 off midline. Optional hardware can provide additional adjustability in all directions. This bracket can be used with all pad styles. 471C49=HR-RNLBRKT Rock-n-Lock Headrest Bracket - Complete Flip Down Headrest Bracket This is our premium rock-n-lock bracket with a hinge mechanism that allows the pad and top half of the bracket to flip down. 471C49=HR-FDBRKT Flip Down Headrest Bracket Flip Down Depth Adjustable Headrest Bracket 470C49=NT-HR- FDDABRKT Flip Down Depth Adjustable Headrest Bracket Multi-Axis Headrest Bracket This bracket has two spherical joints that allow quick and easy adjustment in all directions. This bracket can be used with all pad styles. 471C49=HR-MABRKT Multi-Axis Offset Headrest Bracket - Complete Single-Axis Offset Headrest Bracket - Complete 470C49=NT-900025 Single-Axis Offset Headrest Bracket - Complete 44 Headrest Hardware

Double L-Bracket This double l-bracket assembly allows vertical adjustment and up to 5 of anterior/ posterior adjustment. This bracket can be used with all pad styles except molded headrests. 471C49=HR-LBRKT Double L-Headrest Bracket - Complete Economy Headrest Brackets 470C49=NT-HR- SAEBRKT 470C49=NT-HR-FEBRKT Economy Headrest Bracket - Single-Axis Economy Headrest Bracket - Fixed Back Mounting Clamp for Economy Headrest (not pictured) 470C49=NT-HR- EBMC Back Mounting Clamp for Economy Headrest Rock-n-Lock Clamp with Handle 470C49=RNLCLMP Rock-n-Lock Clamp with Handle Back Mounting Clamp 470C49=NT-HR- MACLAMP Back Mounting Clamp Headrest Hardware 45

Trunk Supports and Hardware 1 Easily adjust height and width of thoracic supports to ensure proper seat adaptation.. 1 2 Fixed and quick release lateral supports. are available. Both options fit with a variety. of standard and offset mounting hardware.. 2 3 Optimized postural support can. be individualized with NUTEC s. intelligent hardware. 3

Lateral Hip and Thigh Supports Lateral hip and thigh supports help position the pelvis on the seating surface by preventing unwanted lateral movement. The pads are fabricated from high quality materials and are attached to the seat with strong but lightweight aluminum brackets. Heavy duty steel brackets are available in some fixed configurations. Please specify height, length and thickness of the pads (standard thickness is 1 overall). Flush mount brackets will be sent unless specified otherwise. Seat width, seat thickness and user hip width measurements will ensure proper brackets will be supplied. Fixed Lateral Hip Supports These supports use a slotted bracket on the bottom to provide lateral adjustability. Various offsets and bracket heights available (see page 49-50 for options). 471C49=LHS-F 471C49=LHS-FL 471C49=LHS-FR 471C49=K-HSFP 471C49=K-HSF-E Lateral Hip Support - Fixed Hardware - Pair Lateral Hip Support - Fixed Hardware - Left Side Lateral Hip Support - Fixed Hardware - Right Side Lateral Hip Support - Hardware Only - Pair Lateral Hip Support - Hardware Only - Each Quick Release Lateral Hip Support These supports use a detachable pad that can be easily removed to facilitate lateral transfers. Various offsets and bracket heights available (see page 48 for options). 471C49=LHS-QR 471C49=LHS-QR-L 471C49=LHS-QR-R 471C49=K-HSQR-P 471C49=K-HSQR-E Lateral Hip Support - Quick Release - Pair Lateral Hip Support - Quick Release - Left Side Lateral Hip Support - Quick Release - Right Side Lateral Hip Support - Quick Release - Hardware Only - Pair Lateral Hip Support - Quick Release - Hardware Only - Each Armrests 471C49=AR-FH 471C49=AR-AH Armrests - Fixed Height Armrests - Adjustable Height Lateral Hip and Thigh Supports 47

Lateral Knee Supports The lateral knee support (knee buttons) attach to footrest and provide distal thigh control. 3 or 4 round pads are standard. Custom size pads are available. Two bracket heights are available (see page 50 for options). Standard and tall are available. 471C49=NT-LKS78 471C49=NT-LKS88 471C49=K-LKS-P Lateral Knee Supports - Fixed - for 7/8 Tubing Lateral Knee Supports - Fixed - for 1 Tubing Lateral Knee Support - Hardware Only (please specify tube diameter) Quick Release Hip Support Extension Bracket 470C49=NT-00135 Quick Release Hip Support Extension Bracket - 5 470C49=NT-00135-A Quick Release Hip Support Extension Bracket - 7 470C49=NT-00135-B Quick Release Hip Support Extension Bracket - 8 Quick Release Hip Support Extension Bracket - Offset 470C49=NT-OB-QR5-OS 5 Quick Release Hip Support Extension Bracket - 1 Offset 470C49=NT-OB-QR7-OS 7 Quick Release Hip Support Extension Bracket - 1 Offset Quick Release Hip Support Receiver 470C49=NT-QRLHS-R Quick Release Hip Support Receiver - Right 470C49=NT-QRLHS-L Quick Release Hip Support Receiver - Left Quick Release Hip Support Receiver - Short 470C49=NT-QRLHS-RS Quick Release Hip Support Receiver - Right - Short 470C49=NT-QRLHS-LS Quick Release Hip Support Receiver - Left - Short 48 Lateral Hip and Thigh Supports

Lateral Hip Bracket - Flush 470C49=NT-00109 Lateral Hip Bracket - 3 1/2 Width x 2 Depth x 5 Height 470C49=NT-00109-T Lateral Hip Bracket - 3 1/2 Width x 2 Depth x 7 Height 470C49=NT-TS0192 Miniature Hip Support Bracket - Flush Lateral Hip Bracket - Offset 470C49=NT-00110 1 Offset Lateral Hip Bracket - 3 1/2 Width x 2 Depth x 5 Height 470C49=NT-00111 2 Offset Lateral Hip Bracket - 4 Width x 2 Depth x 5 Height 470C49=NT-TS0191 Miniature Hip Support Bracket -1 Offset Heavy Duty Hip Support Bracket 470C49=NT-00109-HD 470C49=00109-THD Heavy Duty Hip Support Bracket - 1/4 Aluminum x 5 High Heavy Duty Hip Support Bracket - 1/4 Aluminum x 7 High 470C49=NT-00110-HD Heavy Duty Hip Support Bracket - 1/4 Aluminum x 5 High. - 1 Offset Extra Heavy Duty Hip Support Bracket 470C49=00109-XHD Extra Heavy Duty Hip Support Bracket - 1/4 Steel x 5 High 470C49=00109-TXHD Extra Heavy Duty Hip Support Bracket - 1/4 Steel x 7 High Slotted Hip Support Bracket 470C49=NT-00109-S Slotted Hip Support Bracket - 5 High 470C49=NT-00110-TS Slotted Hip Support Bracket - 7 High 470C49=NT-00110-S Slotted Hip Support Bracket - 5 High - 1 Offset Short Base Hip Support Bracket 470C49=NT-OB-HSB Short Base (3 ) Hip Support Bracket - 5 High 470C49=NT-OB-HSB01 Short Base (3 ) Hip Support Bracket - 5 High - 1 Offset Lateral Hip and Thigh Supports 49

Pad Mounting Bracket for Rotational LHS Bracket 470C49=00138-APMS Pad Mounting Bracket for Rotational LHS Bracket Adapter Bracket for Rotational LHS Bracket 470C49=00138-ASMB Adapter Bracket for Rotational LHS Bracket Lateral Knee Support Bracket - Short 470C49=NT-LKSS78 Lateral Knee Support Bracket - Short - 7/8 - Each 470C49=NT-LKSS88 Lateral Knee Support Bracket - Short - 1 - Each Lateral Knee Support Bracket - Tall 470C49=NT-LKST78 Lateral Knee Support Bracket - Tall - 7/8 - Each 470C49=NT-LKST88 Lateral Knee Support Bracket - Tall 1 - Each Hip Abductors Medial thigh supports (hip abductors) are designed to decrease excessive hip abduction by placing a pad between the medial aspects of the distal thighs. The pads are height and depth adjustable. Please specify pad size, seat thickness, and upholstery option. Flip Down Hip Abductor This support flips down out of the way to facilitate transfers and is height and depth adjustable. 471C49=ABD-FD Hip Abductor - Flip Down with Pad 50 Lateral Hip and Thigh Supports / Hip Abductor Hardware

Slide Out Hip Abductor The high strength bracket provides height and depth adjustment of the pad. 471C49=ABD-SO Slide Out Hip Abductor with Pad Quick Release Flip Under Hip Abductor This support flips down under the seat allowing the most leg room for transfers. Bracket is both height and depth adjustable. 471C49=ABD-FQR Hip Abductor - Quick Release Flip Down with Pad Drop In Hip Abductor This support mounts to a seat pan or the bottom of a solid seat. It can be mounted on chairs where under seat space is limited. Bracket has both height and depth adjustability. 471C49=ABD-DI Hip Abductor - Drop In Bracket with Pad Flip Down Abductor Bracket Base 470C49=NT-AB7223 Flip Down - 7 Base for 2-3 Thick Seats 470C49=NT-AB7323 Flip Down - 7 Base for 3-4 Thick Seats 470C49=NT-AB7423 Flip Down - 7 Base for 4-5 Thick Seats 470C49=NT-AB7523 Flip Down - 7 Base for 5-6 Thick Seats 470C49=NT-AB10223 Flip Down - 10 Base for 2-3 Thick Seats 470C49=NT-AB10323 Flip Down - 10 Base for 3-4 Thick Seats 470C49=NT-AB10423 Flip Down - 10 Base for 4-5 Thick Seats 470C49=NT-AB10523 Flip Down - 10 Base for 5-6 Thick Seats Slide Out Base 470C49=NTSO223 470C49=NTSO323 470C49=NTSO423 470C49=NTSO523 Slide-Out - 10 Base for 2-3 Thick Seats Slide-Out - 10 Base for 3-4 Thick Seats Slide-Out - 10 Base for 4-5 Thick Seats Slide-Out - 10 Base for 5-6 Thick Seats Hip Abductor Hardware 51

Pad Only - Hip Abductor 471C49=ABD-PAD Pad Only - Hip Abductor Quick Release Flip Under Abductor Assembly ABD-FQRBRKT 470C49=PNMABNTBASE Quick Release Flip Under Abductor Assembly Please Specify Seat Thickness Quick Release Flip Under Assembly 52 Hip Abductor Hardware

Lateral Thoracic Supports NUTEC s positioning hardware allows for individuals to customize the seating system for specific user support needs. The trunk and hip positioning hardware can be adjusted at any time and is easily exchangeable. Positioning support options include items such as quick release, fixed, swing away, and summer/ winter hardware. Flip down and removable abductors are available for better positioning and easier handling as well. Fixed Lateral Thoracic Support Lateral Thoracic Supports - These are shipped in pairs complete with brackets, pads, and fasteners. Please see Hardware Section for components. Standard pads have 1/2 neoprene foam medially and 1/4 foam on the lateral aspect. Overall thickness of pad is approximately 3/4. Thin pads are available as a no charge option. Various off-sets and bracket heights available (see page 56-57 for options). 471C49=LTS-F 471C49=LTS-F-E 471C49=K-FTS-P Fixed - Pair Fixed - Each Fixed Lateral Trunk Supports - Hardware Only (pads not included) Lift to Release Swingaway Lateral Thoracic Support These supports are a three part assembly consisting of back mounting bracket, swingaway hinge and an extension bracket that attaches to the pad. This modular configuration provides various offsets as well as different anterior /posterior pad placements. This bracket uses a lift to release mechanism for good reliability and strength. Comes standard with flush and 1 medial offset extension brackets. 471C49=LTS-SA Lift to Release Swingaway - Pair 471C49=LTS-SA-L Lift to Release Swingaway - Left Side 471C49=LTS-SA-R Lift to Release Swingaway - Right Side 471C49=NT-SABKIT Lift to Release Swingaway Brackets - Hardware Only. (pads not included) Lateral Thoracic Supports 53

Pushbutton Swingaway Lateral Thoracic Support These supports use our premium swingaway bracketry which has the three part modular configuration described above. In addition it has an easy-to-release swingaway hinge that is also very strong and durable. These brackets come standard with flush and 1 medial offset extension brackets. 471C49=LTS-PB 471C49=LTS-PB-E 471C49=K-PBTS-P Pushbutton Swingaway - Pair Pushbutton Swingaway - Each Pushbutton Swingaway Lateral Trunk Supports - Hardware Only (pads not included) Summer / Winter Lateral Thoracic Support These brackets have a receiver bracket with a spring loaded plunger. This hardware allows the brackets and pads to be adjusted laterally to compensate for changes in clothing thickness. It also allows the supports to be quick release to facilitate lateral transfers. Should not be used with backs that are between the back post mount unless an I-back modification is used. 471C49=LTS-SW Summer/Winter - Pair 471C49=LTS-SW-E Summer/Winter - Each 471C49=K-SWTS-P Summer/Winter Lateral Trunk Supports. - Hardware Only (pads not included) Summer / Winter Pushbutton Swingaway Lateral Thoracic Support This hardware combines the benefits of our premium swingaway hardware with the adjustability of summer/winter Brackets. 471C49=LTS-SWPB Summer/Winter Pushbutton Swingaway - Pair 471C49=LTS-SWPB-E Summer/Winter Pushbutton Swingaway - Each 471C49=K-SWPBTS-P Summer/Winter Pushbutton Swingaway Lateral Trunk Supports. - Harware Only (pads not included) 54 Lateral Thoracic Supports

Clamp-On Lateral Thoracic Support Our clamp-on brackets securely attach to the back post and provide lateral support for clients without a solid back or who are using a back that doesn't allow mounting of conventional lateral supports. Please specify wheelchair model and size, backpost diameter (3/4, 7/8 or 1 ) and user chest width. Can be used with standard wheelchair back upholstery. Wrap-around back upholstery must be modified. Size 471C49=LTS-FCO Specify 3/4, 7/8, 1 Fixed Clamp-On - Pair 471C49=LTS-FCO-E Specify 3/4, 7/8, 1 Fixed Clamp-On - Each 471C49=K-COFTS-P Fixed Clamp On Lateral Trunk Supports - Hardware Only. (pads not included) Pushbutton Swingaway Clamp-On Lateral Thoracic Support These supports clamp-on to the back posts and use our push button swingaway bracketry to facilitate transfers. All other details are the same as our standard clamp-on brackets. Size 471C49=LTS-PBCO Specify 3/4,7/8, 1 Pushbutton Swingaway Clamp-On - Pair 471C49=LTS-PBCO-E Specify 3/4,7/8, 1 Pushbutton Swingaway Clamp-On - Each 471C49=K-COSTS-P Pushbutton Swingaway Clamp-On Lateral Trunk Supports. - Hardware Only (pads not included) Shoulder Retractor Shoulder retractors help improve sitting posture by limiting shoulder and sacpular protraction. Mounting the support pad laterally (distal) helps improve control. The pads lift and swingaway to allow transfers in and out of the wheelchair. The standard pad is cylindrical and available in different lengths (small is 4, medium is 5 1/2, large is 7 or custom). Must be used with a proper pelvic positioning belt. 471C49=SR-100-E 471C49=SR-100-P 471C49=SR-SABRKT-E 471C49=SR-SABRKT-P Shoulder Retractor - Each Shoulder Retractor - Pair Swingaway Shoulder Retractor Bracket Swingaway Shoulder Retractor Bracket Pad Only 471C49=LTS-PADS 471C49=LTS-PAD Pads Only - Lateral Thoracic Pad Only - Lateral Thoracic Lateral Thoracic Supports 55

Clamp-On Fixed Bracket 470C49=NT-COFA68 3/4 Clamp-On Fixed Bracket - Complete 470C49=NT-COFA78 7/8 Clamp-On Fixed Bracket - Complete 470C49=NT-COFA88 1 Clamp-On Fixed Bracket - Complete Clamp-On Swingaway Bracket 470C49=NT-COPBA68 3/4 Clamp-On Swingaway Bracket - Complete 470C49=NT-COPBA78 7/8 Clamp-On Swingaway Bracket - Complete 470C49=NT-COPBA88 1 Clamp-On Swingaway Bracket - Complete Clamp-On Trunk Support Bracket 470C49=NT-COB68 Clamp-On Trunk Support Bracket - 3/4 Tubing 470C49=NT-COB78 Clamp-On Trunk Support Bracket - 7/8 Tubing 470C49=NT-COB88 Clamp-On Trunk Support Bracket - 1 Tubing Flush Mount Trunk Support Bracket 470C49=NT-00109 470C49=NT-00109-T 470C49=NT-TS0192 Flush Mount Trunk Support Bracket 2 Height x 3 1/2 Width x 5 Depth Tall Flush Mount Trunk Support Bracket 2 Height x 3 1/2 Width x 7 Depth Miniature Trunk Support Bracket - Flush 1 1/2 x 3 1/2 x 5 Offset Mount Trunk Support Bracket 470C49=NT-00110 470C49=NT-00111 470C49=NT-TS0191 1 Offset Trunk Support Bracket 2 Height x 3 1/2 Width x 5 Depth 2 Offset Trunk Support Bracket 2 Height x 4 Width x 5 Depth Miniature Trunk Support Bracket - 1 Offset 1 1/2 x 3 1/2 x 5 56 Trunk Support Hardware

Heavy Duty Aluminum Trunk Support Bracket 470C49=NT-00109-HD Heavy Duty Aluminum Trunk Support Bracket. Flush x 2 x 3 1/2 x 5 470C49=NT-00110-HD Heavy Duty Aluminum Trunk Support Bracket. 1 Offset x 2 x 3 1/2 x 5 470C49=NT-00109-THD Heavy Duty Aluminum Trunk Support Bracket. Flush x 2 x 3 1/2 x 7 Heavy Duty Steel Trunk Support Bracket 470C49=NT-00109-XHD Heavy Duty 1/4 Steel Trunk Support Bracket. Flush x 2 x 3 1/2 x 5-90 470C49=NT-00109-TXHD Heavy Duty 1/4 Steel Trunk Support Bracket. Flush x 2 x 3 1/2 x 7-90 470C49=NT-109-5100XHD Heavy Duty 1/4 Steel Trunk Support Bracket. Flush x 2 x 3 1/2 x 5-100 470C49=NT-109-7100XHD Tall Heavy Duty 1/4 Steel Trunk Support Bracket. Flush x 2 x 3 1/2 x 7-100 470C49=NT-109-5110XHD Heavy Duty 1/4 Steel Trunk Support Bracket. Flush x 2 x 3 1/2 x 5-110 470C49=NT-109-7110XHD Tall Heavy Duty 1/4 Steel Trunk Support Bracket. Flush x 2 x 3 1/2 x 7-110 Swingaway Bracket Mount 470C49=NT-00139 Swingaway Bracket Mount - 90 470C49=NT-00154 Swingaway Bracket Mount - 100 470C49=NT-00154-20 Swingaway Bracket Mount - 110 470C49=NT-00139-M Miniature Swingaway Bracket Mount - 90 Swingaway Bracket Extender 470C49=NT-00170-1 Swingaway Bracket Extender - Adds 2 1/2 470C49=NT-00170-2 Swingaway Bracket Extender - Adds 1 1/2 Trunk Support Hardware 57

Swingaway Extension Bracket Flush 470C49=NT-00138-S 470C49=NT-00138 470C49=NT-00138-L Swingaway Extension Bracket Flush - 2 1/4 Long Swingaway Extension Bracket Flush - 3 1/4 Long Swingaway Extension Bracket Flush - 5 1/4 Long Swingaway Extension Bracket Offset 470C49=NT-00138-OS1 470C49=NT-00138-LOS1 470C49=NT-00138-LOS2 Swingaway Extension Bracket - 1 Offset x 2 1/4 Long Swingaway Extension Bracket - 1 Offset x 3 1/4 Long Swingaway Extension Bracket - 2 Offset x 3 1/4 Long Miniature Swingaway Extension Bracket 470C49=NT-EBM-S 470C49=NT-EBM-L 470C49=NT-EBM-OS1 Miniature Swingaway Extension Bracket - Flush - Short Miniature Swingaway Extension Bracket - Flush - Long Miniature Swingaway Extension Bracket - Flush - 1 Offset Trunk Support Bracket Extender 470C49=NT-LTS-ED Trunk Support Bracket Extender 58 Trunk Support Hardware

Swingaway Spacer 470C49=NT-00163 Swingaway Spacer - 1 470C49=NT-00163-1 Swingaway Spacer - 1 1/2 Lateral Support Spacer 470C49=NT-00151-A 470C49=NT-00151-B 470C49=NT-00151-C Lateral Support Spacer - 1/4 Thick with Bolts Lateral Support Spacer - 1/2 Thick with Bolts Lateral Support Spacer - 1 Thick with Bolts Round Spacer 470C49=NT-SPACER48 Round Spacer - 7/8 Ø X 1/2 Thick with 1/4 Ø. Through Hole Trunk Support Hardware 59

Leg and Foot Supports 2 Padded ankle straps and side release buckles are included for easy adjustment and come. with a mounting kit. Velcro straps available on request. 2 1 1 These injection molded foot supports are made from high strength ABS and are full thickness throughout for maximum durability.

Single Leg Footboxes These footboxes help properly position the legs and feet. They are constructed from ABS plastic and have 1/2 high density foam padding. Standard mounting is to bolt onto footplates. Adjustable angle permanent mount hardware is also available. Sold in pairs. Black vinyl upholstery is standard. 471C49=FB-SLS 471C49=FB-SLM 471C49=FB-SLL 471C49=FB-SLC Single Leg Footboxes - Small Single Leg Footboxes - Medium Single Leg Footboxes - Large Single Leg Footboxes - Custom Double Leg Footboxes This product is designed to help properly position and protect both legs and feet in one box. They have an ABS plastic shell and 1/2 high density foam padding. Three methods of attachment are available: Standard mounting is bolt on to footplates. Optional mounting includes attaching to front riggings with hook hardware or solid seat attachment with permanent mount or adjustable angle hardware. Black vinyl upholstery is standard. 471C49=FB-DLS 471C49=FB-DLM 471C49=FB-DLL 471C49=FB-DLC Double Leg Footboxes - Small Double Leg Footboxes - Medium Double Leg Footboxes - Large Double Leg Footboxes - Custom Foot Supports with Padded Straps 471C49=FSS Foot Supports with Padded Straps - Small - Pair 471C49=FSS-E Foot Supports with Padded Straps - Small - Each 471C49=FSM Foot Supports with Padded Straps - Medium - Pair 471C49=FSM-E Foot Supports with Padded Straps - Medium - Each 471C49=FSL Foot Supports with Padded Straps - Large - Pair 471C49=FSL-E Foot Supports with Padded Straps - Large - Each 471C49=FSXL Foot Supports with Padded Straps - Extra Large - Pair 471C49=FSXL-E Foot Supports with Padded Straps - Extra Large - Each Ankle Holders Cuff contours to ankle and is attached to footplates with footman loops and adjustable straps. Fasteners included. Grommet attachment available on request. Ankle Holders with Fasteners 471C49=AH-XS 471C49=AH-S 471C49=AH-M 471C49=AH-L 471C49=AH-XL Ankle Holders with Fasteners - Extra Small Ankle Holders with Fasteners - Small Ankle Holders with Fasteners - Medium Ankle Holders with Fasteners - Large Ankle Holders with Fasteners - Extra Large Foot Boxes / Foot Positioners 61

Amputee Supports This product is designed to provide a therapeutic support surface for residual limbs for below knee amputees. Amputee Support - Multiarticular 471C49=BKS-100 Amputee Support - Multiarticular 7/8 or 1 Amputee Support - Bent Tube 471C49=BKS-101 Amputee Support - 3/4 Bent Tube - 7/8 or 1 Multi-Articulator Amputee Support Hardware 470C49=K-AS100 Amputee Support Clamp for BKS-100 Bent Tube Amputee Support Hardware 470C49=K-AS-101 Bent Tube Amputee Support for BKS-101 62 Amputee Supports Hardware

Positioning Belts and Harnesses From standard to dynamic, NUTEC s wide range of belts and harnesses assist in positioning the upper body and pelvis for increased function and mobility. 1 1 Dynamic option provides support. over a broad area to minimize. interface pressures. 3 Adjustment straps allow for. secure positioning of client and easily adjust for maximum usability. 3 2 2 Padding provides optimum... wearing comfort.

Hip Belts Most of our hip belts have anchor plates and slides for attachment and initial adjustment. This mounting method provides improved security and also makes it simple to maintain adjustment. Grommet attachments are available upon request. Padded Hip Belt 471C49=PB-PHB-M 471C49=PB-PHB-P 471C49=PB-PHB-A 471C49=PB-PHB-HD Padded Hip Belt - Miniature 1 Metal Buckle Padded Hip Belt - Pediatric 1 1/2 x 44 with Auto Style Buckle Padded Hip Belt - Adult 2 x 48 with Auto Style Buckle Heavy Duty Padded Hip Belt 2 x 52 with Auto Style Buckle Wrap Around Hip Belt 471C49=PB-HBWA Wrap Around Hip Belt - 2 x 84 with Slide Adjustment Padded Hip Belt - Center Pull 471C49=PB-PHBXS-CP Padded Hip Belt - Center Pull - 1 Mini Metal Buckle 471C49=PB-PHBS-CP Padded Hip Belt - Center Pull - Small 471C49=PB-PHBM-CP Padded Hip Belt - Center Pull - Medium 471C49=PB-PHBL-CP Padded Hip Belt - Center Pull - Large 471C49=PB-PHBXL-CP Padded Hip Belt - Center Pull - Extra Large Padded Hip Belt - Double Rear Pull 471C49=PB-PHBXS-DP Padded Hip Belt - Double Rear Pull - Extra Small 471C49=PB-PHBS-DP Padded Hip Belt - Double Rear Pull - Small 471C49=PB-PHBM-DP Padded Hip Belt - Double Rear Pull - Medium 471C49=PB-PHBL-DP Padded Hip Belt - Double Rear Pull - Large 471C49=PB-PHBXL-DP Padded Hip Belt - Double Rear Pull - Extra Large 64 Pelvic Positioning Belts

Four Point Hip Belt - Center Pull 471C49=PB-4PXS-CP Four Point Hip Belt - Center Pull - Extra Small 471C49=PB-4PS-CP Four Point Hip Belt - Center Pull - Small 471C49=PB-4PM-CP Four Point Hip Belt - Center Pull - Medium 471C49=PB-4PL-CP Four Point Hip Belt - Center Pull - Large Four Point Hip Belt - Double Rear Pull 471C49=PB-4PS-DP Four Point Hip Belt - Double Rear Pull - Small 471C49=PB-4PM-DP Four Point Hip Belt - Double Rear Pull - Medium 471C49=PB-4PL-DP Four Point Hip Belt - Double Rear Pull - Large Chest Belt (not pictured) 471C49=PB-HDCB Chest Belt - 4 Heavy Duty Butterfly Chest Belt These upper body supports provide support over a broad area to minimize interface pressures. They are available in standard (static) and dynamic versions. 471C49=PB-BFXS 471C49=PB-BFS 471C49=PB-BFM 471C49=PB-BFL Butterfly Chest Belt - Extra Small Butterfly Chest Belt - Small Butterfly Chest Belt - Medium Butterfly Chest Belt - Large Dynamic Butterfly Chest Belt 471C49=PB-DBFXS Dynamic Butterfly Chest Belt - Extra Small 471C49=PB-DBFS Dynamic Butterfly Chest Belt - Small 471C49=PB-DBFM Dynamic Butterfly Chest Belt - Medium 471C49=PB-DBFL Dynamic Butterfly Chest Belt - Large 471C49=PB-DBFXL Dynamic Butterfly Chest Belt - Extra Large Pelvic Positioning Belts / Upper Body Positioning Belts 65

Padded H-Belt These belts help provide upper body support by keeping the shoulders and upper chest in a more upright position. The shoulder straps are padded. These are available in standard (static) or dynamic configurations. The dynamic belts allow the client to move within a narrow range of motion. 471C49=PB-HBXS 471C49=PB-HBS 471C49=PB-HBM 471C49=PB-HBL 471C49=PB-HBXL Padded H-Belt - Extra Small Padded H-Belt - Small Padded H-Belt - Medium Padded H-Belt - Large Padded H-Belt - Extra Large Dynamic H-Belt 471C49=PB-DHBS 471C49=PB-DHBM 471C49=PB-DHBL 471C49=PB-DHBXL Dynamic H-Belt - Small Dynamic H-Belt - Medium Dynamic H-Belt - Large Dynamic H-Belt - Extra Large Back Pack Straps These straps provide upper body support and shoulder retraction. 471C49=PB-BPSS 471C49=PB-BPSM 471C49=PB-BPSL Back Pack Straps - Small Back Pack Straps - Medium Back Pack Straps - Large Dynamic Back Pack Straps 471C49=PB-DBPSS Dynamic Back Pack Straps - Small 471C49=PB-DBPSM Dynamic Back Pack Straps - Medium 471C49=PB-DBPSL Dynamic Back Pack Straps - Large Strap Riser 471C49=SR-1 471C49=SR-2 Strap Riser - for 1 Webbing Strap Riser - for 2 Webbing Anchor Plate 470C49=NT-00161 Anchor Plate - 1 NT-00169 Anchor Plate - 1 1/2 NT-00162 Anchor Plate - 2 66 Upper Body Positioning Belts / Belt Parts

Trays and Ancillary Hardware NUTEC trays are available in a variety of customized options including clear acrylic, polycarbonate, finished wood and vinyl fabric. Communication mounts are also available adjusting in both height and angle, providing the ideal solution for communication devices and customized therapy tables.

Custom Wheelchair Trays We fabricate custom trays from a variety of materials including clear acrylic, polycarbonate, finished wood and vinyl fabric covered padded trays. Methods of attachment include Standard velcro type straps, tray rails, toggle clamps and cam lock rails. 471C49=NT4000 Custom Wheelchair Tray Standard Tray Rails 471C49=TM-SR Standard Tray Rails - Fits 1 to 1 1/8 Thick Pads Pair Tray Rails - Oversize 470C49=TM-SR-OS Tray Rails - Oversize - for Arms Up to 1 5/16 Thick and 2 3/8 Wide Per Pair (no stops) Tubular Tray Rails 471C49=TM-TR Tubular Tray Rails - Fits Most Round Armrests Cam Lock Tray Rails 471C49=TM-CLR Cam Lock Tray Rails with Adjustable Thickness 68 Custom Trays / Tray Hardware

Tray Clamps with Knobs 470C49=TM-KC Tray Clamps with Knobs - Pair Toggle Clamps 471C49=TM-TC Toggle Clamps - Pair Tray Toggle Clamp Kit with Adjustable Mounting Base 470C49=TM-TTCK Tray Toggle Clamp Kit with Adjustable Mounting Base.. Clamp has Low Profile "T"Handle Tray Tracks (not pictured) 470C49=NT-TRAYTRKS Tray Tracks (to mount tray rails) Adjustable Angle Flip Up Tray Mount 470C49=TM- FLIP Adjustable Angle Flip Up Tray Mount - Please Specify Mounting- L-Bracket for Solid Seat, Tubular Mount (specify diameter) or Square Frame Mount (bolt on) Communication Tray Mount 470C49=TM-CMT Communication Tray Mount - Tubular Mount. Please specify 3/4, 7/8 or 1 Ø 470C49=TM-CML Communication Tray Mount - L-Bracket Mount Tray Hardware 69

Mount for LTV Ventilator 470C49=NT-LTVM-SB Mount for LTV Ventilator - Solid Back Mount 470C49=NT-LTVM-78 Mount for LTV Ventilator - 7/8 Tube Mount 470C49=NT-LTVM-88 Mount for LTV Ventilator - 1 Ø Tube Mount Oxygen Tank Holder This holder is made to attach an "E" Cylinder to a wheelchair frame. The double clamp bracket provides a secure mount that can be easily adjusted in different positions. Please specify backpost diameter. 471C49=NT-O2H Oxygen Tank Holder - Clamp-On - Specify Tube Size IV Pole The IV pole clamps to the backposts of most wheelchairs. It allows height adjustment and is removable for transport. Please specify 3/4, 7/8 or 1 backpost diameter. 471C49=NT-IVP48 IV Pole - Clamp-On - Specify Tubing Size Transfer Boards Transfer Boards are used for a wheelchair user to move from one seated surface to another. Our standard transfer boards are constructed of 1/2 Baltic Birch nine plywood and have a durable conversion finish. Standard sizes are listed below, custom and heavy duty sizes are also available. 471C49=NT-TB824 471C49=NT-TB824H 471C49=NT-TB827 471C49=NT-TB827H 471C49=NT-TB830 471C49=NT-TB830H Transfer Board - 8 Wide x 24 Long Transfer Board - 8 Wide x 24 Long with Hand Holes Transfer Board - 8 Wide x 27 Long Transfer Board - 8 Wide x 27 Long with Hand Holes Transfer Board - 8 Wide x 30 Long Transfer Board - 8 Wide x 30 Long with Hand Holes 70 Ancillary Devices / Transfer Boards

Seat and Back Hardware NUTEC offers a wide variety of hardware solutions for. attaching seating systems to a mobility base. Made of anodized aluminum, NUTEC s hardware is sturdy and. reliable. Easy to use, when needed the seating hardware can be separated from the mobility base for transporting. or for mounting onto another base. Hardware kits are available for quick and easy ordering. 71

Dynamic Extension Relief Forks Dynamic hardware is available on solid backs with knob release hardware and frame widths between 12 and 18. Three different spring tensions are available to accommodate users from 40lbs to 250lbs. This hardware provides shock absorption caused by excessive tone, spasticity or by repositioning. It extends the life of the wheelchair and basic insert by reducing stress on the wheelchair backposts. Not available with backs that are curved by wood (curved by foam and most other modifications are available). 470C49=DERF Dynamic Extension Relief Back Modification Independent Dynamic Extension Relief Forks This modification is available on backs with knob release hardware, frame widths up to 24 and can accommodate users up to 250lbs. This modification is available only on flat backs. The IDERF modification will allow slight rotation in addition to extension. It will absorb shock caused by excessive tone, spasticity or by repositioning. It will extend the life of the wheelchair frame and basic insert by reducing stress on the backposts. Not available with backs that are curved by wood (curved by foam and most other back modifications are available). 470C49=IDERF Independent Dynamic Extension Relief Fork Modification Complete Knob Release Hardware Kit NUTEC offers a wide variety of hardware solutions for attaching seating systems to a mobility base. Made of anodized aluminum, NUTEC s hardware is sturdy and reliable. Easy to use, when needed the seating hardware can be easily separated from the mobility base for transporting or for mounting onto another base. Hardware kits available for quick and easy ordering. 470C49=NT-KRKIT 471C49=K-KRSBC-HD 471C49=K-KRS-HD 471C49=K-KRB-HD Complete Knob Release Hardware Kit Complete Heavy Duty Knob Release Kit Heavy Duty Knob Release Hardware Kit for Seat Heavy Duty Knob Release Hardware Kit for Back Knob Release Seat Clamp Size 470C49=NT-KRSC68 3/4 470C49=NT-KRSC78 7/8 471C49=NT-KRSC88 1 72 Dynamic Hardware / Independent Dynamic Hardware / Knob Release Hardware

Knob Release Back Clamp Size 470C49= 3/4 471C49=NT-KRBC78 7/8 470C49=NT-KRBC88 1 Knob Release Seat Clamp for Shapeloc Tubing 470C49=NT-KRSL Knob Release Seat Clamp for Shapeloc Tubing Seat Fork 471C49=NT-00104 470C49=NT-00201 Size Standard Short Seat Tab 471C49=NT-ST01 Seat Tab Back Fork Size Side 471C49=NT00103-L Standard Left 471C49=NT00103-R Standard Right 471C49=NT00196-L Short Left 471C49=NT00196-R Short Right Two Position Back Fork Side 470C49=NT-00126-L Left 470C49=NT-00126-R Right Knob Release Hardware 73

Adjustable Angle Back Fork Side 470C49=NT-BFAL Left 470C49=NT-BFAR Right Seat to Back Brackets Size 470C49=NT-STBF Flush - Pair 471C49=NT-STB15 1 1/2 Offset - Pair 470C49=NT-STB30 3 Offset - Pair Hinged Seat to Back Bracket Size 471C49=STBHF Flush - Pair 471C49=NT-STBH15 1 1/2 Offset - Pair 471C49=NT-STBH30 3 Offset - Pair Complete Miniature Knob Hardware Kit 470C49=NT-MKRKIT Complete Miniature Knob Hardware Kit Miniature Knob Release Seat Clamp Size 470C49=NT-KRCM68 3/4 470C49=NT-KRCM78 7/8 470C49=NT-KRCM88 1 Miniature Knob Release Back Clamp Size 470C49=NT-KRMBC68 3/4 470C49=NT-KRMBC78 7/8 470C49=NT-KRMBC88 1 74 Knob Release Hardware / Miniature Knob Release Hardware

Miniature Seat Fork 470C49=NT-MH0188 Miniature Seat Fork Miniature Back Fork Side 470C49=NT-MH0187-L Left 470C49=NT-MH0187-R Right Miniature Adjustable Angle Back Side 470C49=NT-MABF-L Left 470C49=NT-MABF-R Right Miniature Seat to Back Bracket Size 470C49=NT-MSTB0 Flush 470C49=NT-MSTB15 1 1/2 Offset 470C49=NT-MSTB30 3 Offset Miniature Trunk Hip Support Size 470C49=NT-TS0192 Flush 470C49=NT-TS0191 1 Offset Swingaway Extension Bracket Size 470C49=NT-EBM-S 1 1/2 x 2 1/2 470C49=NT-EBM-L 1 1/2 x 3 470C49=NT-EBM-OS1 1 1/2 x 2 1/2 x 1 Offset Miniature Knob Release Hardware 75

L-Bracket 470C49=NT-3HLB 470C49=NT-5HLB 470C49=NT-9HLB Size 3 Hole L-Bracket 5 Hole L-Bracket 9 Hole L-Bracket J-Hook Size 470C49=NT-JH2H75 2 Hole J-Hook - 3/4 470C49=NT-JH2H78 2 Hole J-Hook - 7/8 470C49=NT-JH2H88 2 Hole J-Hook - 1 470C49=NT-JH468 4 Hole J-Hook - 3/4 470C49=NT-JH478 4 Hole J-Hook - 7/8 470C49=NT-JH488 4 Hole J-Hook - 1 470C49=NT-JH6H78 6 Hole J-Hook - 7/8 470C49=NT-JH6H88 6 Hole J-Hook - 1 Square J-Hook with Quick Pin 470C49=NT-JH88-S Square J-Hook with Quick Pin - 1 x 1 470C49=NT-JH612-R Rectangular J-Hook with Quick Pin - 3/4 x 1 1/2 Flush Mount Seat Hook Size 470C49=NT-DH075 3/4 470C49=NT-DH088 7/8 477C10=FB001 1 470C49=NT-DH088-S 1 x 1 Square 470C49=NT-DH0612-R 3/4 x 1 1/2 Rectangle Drop Hook 470C49=NT-DH178 7/8 Diameter x 1 Drop Hook 470C49=NT-DH188 1 Diameter x 1 Drop Hook 470C49=NT-DH1578 7/8 Diameter x 1 1/2 Drop Hook 470C49=NT-DH1588 1 Diameter x 1 1/2 Drop Hook 470C49=NT-DH278 7/8 Diameter x 2 Drop Hook 470C49=NT-DH288 1 Diameter x 2 Drop Hook 470C49=NT-DH2578 7/8 Diameter x 2 1/2 Drop Hook 470C49=NT-DH2588 1 Diameter x 2 1/2 Drop Hook 470C49=NT-DH378 7/8 Diameter x 3 Drop Hook 470C49=NT-DH388 1 Diameter x 3 Drop Hook 76 Hook Hardware

Flat Seat Hook 470C49=NT-FH 470C49=NT-FHSPCR Flat Seat Hook Spacer for Flat Seat Hook Horseshoe Clip 471C49=NT-HS68 Horseshoe Clip - 3/4 471C49=NT-HS78 Horseshoe Clip - 7/8 471C49=NT-HS88 Horseshoe Clip - 1 Horseshoe Band 471C49=NT-HSB68 Horseshoe Band - 3/4 471C49=NT-HSB78 Horseshoe Band - 7/8 471C49=NT-HSB88 Horseshoe Band - 1 Rotating Horseshoe Clip Size 470C49=NT-HSR68 3/4 470C49=NT-HSR78 7/8 470C49=NT-HSR88 1 Square Band 470C49=NTHSB88-S 470C49=NT-HSB612-R Size 1 Square Band 3/4 x 1 1/2 Band AEL Versa Lock Clip (not pictured) 470C49=VL2 AEL Versa Lock Clips in Lieu of Horse Shoe Clips 1 pair 470C49=VL4 AEL Versa Lock Clips in Lieu of Horse Shoe Clips 2 pair Spreader Bracket for Drop Hooks 470C49=NT-SB01 Spreader Bracket for Drop Hooks Hook Hardware / Track Hardware 77

Single Track Kit 470C49=NT-TRK-3S 470C49=NT-TRK-5S 470C49=NT-TRK-7S 470C49=NT-TRK-9S 470C49=NT-TRK-11S Size 3 5 7 9 11 Double Track Kit 470C49=TRK-3D 470C49=TRK-5D 470C49=TRK-7D 470C49=TRK-9D 470C49=TRK-11D 470C49=TRK-13D 470C49=TRK-15D Size 3 5 7 9 11 13 15 78 Track Hardware