PowerFlex 750-Series AC Drives

Technical Data PowerFlex 7-Series AC Drives Original Instructions Topic Page Summary of Changes 2 Additional Resources 2 Product Overview 3 Certifications and Specifications 8 Design Considerations 4 Fuse and Circuit Breaker Ratings 52 Cable Considerations Motor Considerations 82 Dimensions and Weights 85 Drive Options 45

PowerFlex 7-Series AC Drives Summary of Changes This publication contains new and updated information as indicated in the following table. Topic Page Added Code B 2V AC (8V AC)/ 325V DC (28V DC) and normal duty ratings for 8V and 2V, Hz Input to the 5 Catalog Number Explanation table Added a 8/2V AC column to the Altitude Limit Above Sea Level section of the Environmental Specifications table 9 Added 0/8V ACand 2V AC columns to the Motor Voltage section of the Technical Specifications table Added a 0 2 Drive Rating row to the Input Voltage Tolerance table 4 Added a Watts Loss for 8/2V AC Drives table 5 Added Ambient Temperature/Load and Altitude/Load for 8V AC and 2V AC tables 9 26 Added a Brake Resistance for 8/2V AC Drives table 48 Added 8V AC, 28V DC and 2V AC, 324V DC Input Protection Devices tables 54 56 Added a 8V AC and 2V AC table to the section that describes frame and rating cross-references 85 Added a 2V, Hz, Three-phase, 2V Primary and 2V Secondary table 6 Added a 0 2V, Hz, Three-phase, 3%, and 5% Impedance table 62, 63 Additional Resources These documents contain additional information concerning related products from Rockwell Automation. Resource PowerFlex 7-Series Drive Installation Instructions, publication 7-IN00 PowerFlex 7-Series Programming Manual, publication 7-PM00 PowerFlex -HIM-A6 and -HIM-C6S HIM (Human Interface Module) User Manual, publication HIM-UM00 PowerFlex 755 Integrated Safety - Safe Torque Off Option Module User Manual, publication 7-UM004 PowerFlex 7-Series Safe Torque Off User Manual, publication 7-UM002 Safe Speed Monitor Option Module for PowerFlex 7-Series AC Drives Safety Reference Manual, publication 7-RM00 PowerFlex 7-Class Network Communication Adapter User Manuals, publication 7COM-UM PowerFlex Dynamic Braking Resistor Calculator Application Technique, publication PFLEX-AT00 Wiring and Grounding Guidelines for PWM AC Drives, publication DRIVES-IN00 Preventive Maintenance of Industrial Control and Drive System Equipment Service Bulletin, publication DRIVES-TD00 Safety Guidelines for the Application, Installation, and Maintenance of Solid-State Control, publication SGI-. Industrial Automation Wiring and Grounding Guidelines, publication 7-4. Product Certifications website, http://www.rockwellautomation.com/global/ certification/overview.page Description Provides detailed information on how to install PowerFlex 7-Series AC drives. Provides detailed information on I/O, control, and feedback options; parameters and programming; faults, alarms, and troubleshooting. Provides detailed information on HIM components, operation, and features. Provides detailed information on how to install and use the Integrated Safety - Safe Torque Off option module. Provides detailed information on how to install and use the Safe Torque Off option module. Provides detailed information on how to install and use the Safe Speed Monitor option module. These publications provide detailed information on to configure, use, and troubleshoot PowerFlex 7-Series communication option modules and adapters. To display a list of the available adapters, enter 7com-um in the search field. Provides information to help you understand dynamic braking and how to apply dynamic braking to drive systems. Provides basic information to properly wire and ground PWM AC drives. Provides information for preventative maintenance and periodic inspection of drive systems. Provides general guidelines for the application, installation, and maintenance of solidstate control. Provides general guidelines for installing a Rockwell Automation industrial system. Provides declarations of conformity, certificates, and other certification details. 2 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives You can view or download publications at http://www.rockwellautomation.com/global/literature-library/ overview.page. To order paper copies of technical documentation, contact your local Allen-Bradley distributor or Rockwell Automation sales representative. Product Overview The PowerFlex 7-Series is a robust family of AC drives that provide ease of use, flexibility, and performance for various industrial applications. PowerFlex 753 drives provide general-purpose control for applications up to 0 Hp and 2 kw. PowerFlex 755 drives provide maximum flexibility and performance up to 00 Hp and kw. Maximize your productivity by taking advantage of these key features that are offered in the PowerFlex 7-Series drives: DeviceLogix Embedded control technology that supports the manipulation of discrete outputs and drive control functions, while using discrete inputs and drive status information onboard the drive. Predictive Diagnostics Tracks information that affects the life of the drive cooling fans and relay outputs. The drive can also be programmed to monitor the runtime hours for machine or motor bearings. Option Cards Each drive has a slot-based architecture. Supported hardware control options are available for both products, to help reduce your inventory and spare parts requirements. Safe Torque Off, Safe Speed Monitor, and Integrated Safety - Safe Torque Off Provides a choice for safety levels depending on your application requirements. Communication The PowerFlex 755 drives come with a built-in Ethernet port. Ethernet can easily be added to the PowerFlex 753 drives with a communication module. I/O Option cards are available for additional analog and digital I/O. The PowerFlex 753 drives come with builtin I/O that can also be expanded with option cards. Packaging Factory and field-installable enclosure options are available to meet most environmental requirements. Options include Open Type and flange mount to support cabinet mount requirements, extra protection wall-mount for harsh environments, and debris hoods and conduit plate kits. Standard Power Structure A common power structure is shared to provide the same physical size and power range. Rockwell Automation Publication 7-TD00K-EN-P - October 7 3

PowerFlex 7-Series AC Drives PowerFlex 7-Series Drive Family This section provides a brief introduction to the different PowerFlex 7-Series drives. Wall Mount Frames 7 Floor Mount Frames 8 IP00/IP, NEMA/UL Type Open Drive IP, NEMA/UL Type Drive (20 MCC style cabinet) Includes a DC link choke on all Frames and internal brake transistor, standard on Frames 5, and optional on Frames 6 and 7. Includes a DC link choke, integrated AC line fuses, and roll-out design. Hood that is shown on top of cabinets is optional. To order the hood, see page 57 for information. Floor Mount Frames 8 IP, NEMA/UL Type Drive with Options (20 MCC style cabinet) Roll-out Design (Frame 8 shown) Includes a DC link choke, integrated AC line fuses, roll-out design, and option bay for control/protection devices. A roll-out cart is required for Frames 8 drives and Frame 9 option bay chassis. The roll-out cart has an adjustable curb height of 0 82 mm (0 7.2 in.) and curb offset/reach of 0 4 mm (0 4.5 in.). See page 57 for information to order the roll-out cart. 4 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Catalog Number Explanation 3 4 5 6 7 8 2 3 4 5 6 7 8 G A N D 248 A A O N N N N N LD - P3 - P a b c d e f f6 g h i Positions 4 8 are not used. a e Drive Code Type Frames F PowerFlex 753 7 G PowerFlex 755 2G PowerFlex 755 Drive with Options 8 b Future Use c Input Type Code Description Frames AC Input with Precharge, 5 includes DC Terminals 8 4 DC Input with Precharge 5 A AC Input with Precharge, no DC Terminals 6 8 () () The DC Bus Bar kit (-7-DCBB-Fx) is available for Frames 6 7 AC input drives t h a t require DC bus terminals. d Enclosure Code Description Frames R IP, NEMA/UL Type Open, Frame F () Flange (NEMA/UL Type 4X/2 back) 2 5 G IP54, NEMA/UL Type 2 2 7 N (2) IP/IP00, NEMA/UL Type Open 2 7 B (3) IP, NEMA/UL Type, 0 mm (23.6 in.) Deep, 8 Standard Cabinet Color (RAL 32) J (3) 0 mm (3.5 in.) Deep, 8 IP54, UL Type 2, Standard Cabinet Color (RAL 32) K (3) 20 MCC Style Cabinet and Options w/mcc Power Bus, 0 mm (3.5 in.) Deep, 8 IP54, NEMA 2, Standard Cabinet Color (RAL 32) L (3) 0 mm (3.5 in.) Deep, 8 IP, NEMA/UL Type, Standard Cabinet Color (RAL 32) P (3) 20 MCC Style Cabinet and Options w/mcc Power Bus, 0 mm (3.5 in.) Deep, 8 IP, NEMA/UL Type, Standard Cabinet Color (RAL 32) W (3) 20 MCC Style Cabinet and Options w/mcc Power Bus, 0 mm (3.5 in.) Deep, 8 IP, NEMA/UL Type, CenterLine 20 Gray (ASA49) Y (3) 20 MCC Style Cabinet and Options w/mcc Power Bus, 0 mm (3.5 in.) Deep, 8 IP54, NEMA 2, CenterLine 20 Gray (ASA49) T IP00, UL Open Type without Control POD 8 () For Frames 6 7, a user installed flange kit (-7-FLNG4-Fx) is available to convert a Code N drive that provides a NEMA/UL Type 4X/2 back. (2) Frames 2 5 are IP, Frames 6 7 are IP00. (3) Available as a drive with options (2G). Voltage Rating Code Voltage B 2V AC (8V AC) () / 325V DC (28V DC) () C D E F 0V AC/5V DC 4V AC/6V DC 0V AC/8V DC 6V AC/932V DC (not UL Listed) () Drive must be programmed to obtain low (8V AC) voltage rating. Code kw 2P2 2.5 0.37 f ND Rating 8V (), Hz Input B, J, L, T Frame Enclosure Code F G N 4P2 4.8 0.75 6P8 7.8.5 9P6 2.2 05 5.3 4 2P2 2.5 0.37 4P2 4.8 0.75 6P8 7.8.5 9P6 2.2 2 2 2 05 7.5 4 022 22 5.5 028 32.2 7.5 042 43 3 3 3 054 5 4 4 4 0 78.2 8.2 5 5 0 92 22 5 4 37 54 77 45 92 22 55 2 2 66 32 359 7 (2) 3 44 477 477 32 K, P, W, Y () Drive must be programmed to obtain low (8VAC) voltage rating. (2) For Frames 6 and 7, a user-installed flange kit (-7-FLNG4- Fx) is available to convert a Code N drive that provides a NEMA/ UL Type 4X/2 back. (2) 6 6 7 R ND Rating 2V, Hz Input Frame Enclosure Code Code Hp B, J, K, P, F G N L, T W, Y 2P2 2.2 0.5 4P2 4.2 6P8 6.8 2 9P6 9.6 3 05 5.3 5 2P2 2.2 0.5 4P2 4.2 6P8 6.8 2 9P6 9.6 3 2 2 2 05 5.3 5 022 22 7.5 028 28 042 42 5 3 3 3 054 54 4 4 4 0 25 5 5 0 5 4 4 6 54 54 () 6 92 92 75 2 2 0 32 32 25 7 3 3 () 7 477 477 0 f2 () For Frames 6 and 7, a user-installed flange kit (-7-FLNG4- Fx) is available to convert a Code N drive that provides a NEMA/ UL Type 4X/2 back. R Rockwell Automation Publication 7-TD00K-EN-P - October 7 5

PowerFlex 7-Series AC Drives 3 4 5 6 7 8 2 3 4 5 6 7 8 G A N D 248 A A O N N N N N LD - P3 - P a b c d e f f6 g h i Positions 4 8 are not used. f3 f4 f5 Code kw 2P 2. 0.75 3P5 3.5.5 5P0 5.0 2.2 8P7 8.7 4 0.5 5.5 05 5.4 7.5 022 22 0 5 037 37 8.5 043 43 22 0 072 72 37 085 85 45 4 4 55 75 5 5 2 2 32 ND Rating 0V, Hz Input B, J, L, T Frame Enclosure Code F G N 2 2 2 3 3 3 4 4 5 4 5 5 () 6 K, P, W, Y 2 2 7 367 367 0 7 456 456 2 4 4 2 8 8 (2) 477 477 2 5 5 35 567 567 35 6 6 355 7 7 0 7 7 0 9 9 0 K0 5 K 6 K2 75 7 K4 465 0 K5 4 8 K6 5 0 2K 2 2 8 () For Frames 6 7, a user installed flange kit (-7-FLNG4-Fx) is available to convert a Code N drive that provides a NEMA/UL Type 4X/2 back. (2) Available as a drive with options (2G). () 6 7 8 (2) 9 9 (2) (2) R Code Hp 2P 2. 3P4 3.4 2 5P0 5.0 3 8P0 8.0 5 0 7.5 04 4 022 22 5 027 27 034 34 25 0 052 52 065 65 077 77 096 96 75 25 25 0 56 56 25 86 86 248 248 0 ND Rating 4V, Hz Input B, J, L, T Frame Enclosure Code F G N 2 2 2 3 3 3 4 4 5 4 5 5 () 6 K, P, W, Y 2 2 2 7 36 36 0 7 45 45 3 4 4 3 8 8 (2) 477 477 0 485 485 0 545 545 4 67 67 0 7 7 0 7 7 6 0 0 0 9 9 0 K0 45 0 K2 35 00 K3 365 0 K4 4 2 K5 525 3 2K0 7 () For Frames 6 7, a user installed flange kit (-7-FLNG4-Fx) is available to convert a Code N drive that provides a NEMA/UL Type 4X/2 back. (2) Available as a drive with options (2G). 8 () 6 7 8 (2) 9 9 (2) (2) R Code Hp ND Rating 0V, Hz Input B, J, L, T Frame Enclosure Code F G N K, P, W, Y P7.7 2P7 2.7 2 3P9 3.9 3 6P 6. 5 3 3 3 9P0 9 7.5 0 02 () 2 6 6 07 7 5 3 3 3 08 () 8 5 6 6 022 22 3 3 3 023 () 23 024 () 24 6 6 027 27 25 4 4 4 028 () 28 25 6 6 032 32 4 4 4 033 () 33 6 6 04 4 5 5 5 042 () 42 6 6 052 52 5 5 053 () 53 063 63 077 77 75 6 6 099 99 0 25 25 25 (2) 44 44 92 92 0 242 242 2 7 7 289 289 0 295 295 0 355 355 3 395 395 0 435 435 4 8 8 (3) 4 4 0 5 5 0 595 595 0 6 6 0 7 7 0 825 825 0 9 9 (3) 0 0 9 9 9 00 K 0 K4 4 (3) () Required for uncontrolled common DC bus applications. Optional for all AC applications. (2) For Frames 6 7, a user installed flange kit (-7-FLNG4-Fx) is available to convert a Code N drive that provides a NEMA/UL Type 4X/2 back. (3) Available as a drive with options (2G). R 6 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives 3 4 5 6 7 8 2 3 4 5 6 7 8 G A N D 248 A A O N N N N N LD - P3 - P a b c d e f f6 g h i Positions 4 8 are not used. f6 i Code kw 02 2 7.5 05 5 0 5 023 23 8.5 0 22 034 34 046 46 37 0 45 06 6 55 082 82 75 098 98 9 9 42 42 32 7 7 22 22 0 263 263 2 265 265 2 3 3 35 3 3 355 45 45 0 4 4 4 0 0 0 5 5 5 6 6 6 7 7 7 765 765 7 795 795 0 9 9 0 K0 00 K4 ND Rating 6V, Hz Input (not UL Listed) B, J, L, T g h Frame Enclosure Code F G N () 6 6 7 7 K, P, W, Y () For Frames 6 7, a user installed flange kit (-7-FLNG4-Fx) is available to convert a Code N drive that provides a NEMA/UL Type 4X/2 back. (2) Available as a drive with options (2G). 8 9 8 (2) 9 (2) (2) Filtering and CM Cap Configuration Code Filtering Default CM Cap Connection A Yes Jumper Removed J Yes Jumper Installed Dynamic Braking () Code Internal Resistor (2) Internal Transistor (3) A No Yes N No No () Not available on Frames 8, specify Code N. (2) Frames 2 only. Internal Resistor kits (-7-DB-Dx) sold separately. (3) Standard on Frames 5, optional on 6 7. R Door Mounted HIM (Frames 8 ) Code Operator Interface 0 No Door Mounted HIM 2 Enhanced LCD, Full Numeric, IP 4 Enhanced LCD, Full Numeric, IP66 NEMA Type 4X/2 PowerFlex 755 w/options (2G) Required Selections Code Option Frames Type LD Light Duty System Overload ND Normal Duty 8 Duty Cycle () HD Heavy Duty P3 Input Thermal- magnetic Circuit Breaker Input Non-Fused Molded Case Disconnect Switch 8 () Only one option of this type can be selected. PowerFlex 755 w/options (2G) Additional Selections Power Disconnect () P5 8 Only P4 Wiring Only Bay 8 Wiring Only Bay Code Option Frames Type P Input Contactor 8 Only Contactors ()(2) P2 Output Contactor L 3% Input Reactor 8 9 L2 3% Output Reactor Reactors () L3 5% Input Reactor 8 Only L4 5% Output Reactor P P22 P24 A Bus 00 A Bus 00 A Bus 8 MCC Power Bus Capacity () P UPS Control Bus, DC Input w/precharge only 8 UPS Control Bus Auxiliary Transformer X (0VA available), IP 8 Only (3) Auxiliary Power Cabinet Only () Only one option of this type can be selected. (2) Contactor options are not available for systems with MCC power bus. (3) Standard on all other cabinet configurations. Rockwell Automation Publication 7-TD00K-EN-P - October 7 7

PowerFlex 7-Series AC Drives Certifications and Specifications This section provides information for certifications and specifications. Certifications Certification ABS c-ul-us CE SEMI F47 Description American Bureau of Shipping Certificate -HS743429 Listed to UL8C and CSA22.2 No. 4 (does not apply to 2G drives with enclosure code P or W). In conformity with these European Directives EMC Directive EN 60-3 Low Voltage Directive EN 60-5- ATEX Directive (94/9/EC and 4/34/EU) EC-Type-Examination Certificate Number TÜV 2 ATEX 7328 X EN 495 Certified compliant with the following standards SEMI F47 IEC 600-4-34 EAC Low Voltage TP TC 004/ EMC TP TC 0/ Functional Safety TÜV Rheinland Certification applies to -7-S, -7-S, and -7-S3 Safety Options when installed in drive. Standards applied EN 60-3, EN 68 PARTS -7 EN 60-5-, EN 66 EN 60-5-2, EN 4- EN ISO 3849- KCC KCC-REM-RAA-F-A, KCC-REM-RAA-G-A, MSIP-REM-RAA-F-C KCC-REM-RAA-F-B, KCC-REM-RAA-G-B, MSIP-REM-RAA-F-D KCC-REM-RAA-G-C, MSIP-REM-RAA-G-D MSIP-REM-RAA-F-E, MSIP-REM-RAA-G-E See the certificate of registration for specific drive catalog numbers that have this certification. () Lloyd's Register Lloyd s Register Type Approval Certificate /008 RCM Australian Communications and Media Authority In conformity with the following items Radiocommunications Act: 992 Radiocommunications Standard: 08 Radiocommunications Labeling Notice: 08 Standards applied EN 60-3 RINA RINA Certificate ELE3498CS () See the product certifications website, http://www.rockwellautomation.com/global/certification/overview.page, for declarations of conformity, certificates, and other certification details. 8 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Environmental Specifications Category Altitude Specification Based on load. See derating guidelines on pages 27 48. Maximum surrounding air temperature IP, NEMA/UL Open Type 0 C (32 22 F) Frames 5, all ratings IP00, NEMA/UL Open Type 0 C (32 22 F) 0 C (32 4 F) Frames 6 and 7, 2 456 A ratings Frame 7, 477 A rating IP, NEMA/UL Type 0 C (32 4 F) Frames 5, all ratings (with hood) IP, NEMA/UL Type 0 C (32 4 F) Frames 6 and 7, all ratings (with label) IP00, NEMA/UL Open Type 0 C (32 4 F) () Frames 8, all ratings IP, NEMA/UL Type 0 C (32 4 F) () Frames 8, all ratings IP54, NEMA 2 0 C (32 4 F) () Frames 8, all ratings Flange mount front IP, NEMA/UL Open Type 0 C (32 22 F) Frames 2 5, all ratings IP00, NEMA/UL Open Type 0 C (32 22 F) 0 C (32 4 F) Frames 6 and 7, 2 456 A ratings Frame 7, 477 A rating Back/Heat sink IP66, NEMA/UL Type 4X 0 C (32 4 F Frames 2 7, all ratings Stand-alone/Wall-mount IP54, NEMA/UL Type 2 0 C (32 4 F) Frames 2 7, all ratings Storage temperature (all constructions) - C (- 58 F) Atmosphere IMPORTANT: Do not install the drive in an area where the ambient atmosphere contains volatile or corrosive gas, vapors, or dust. If the drive is not going to be installed right away, store the drive in an area where it is not exposed to a corrosive atmosphere. UV radiation The HIM and IP54, NEMA/UL Type 2 drive plastics are not UV rated. Relative humidity 5 95% noncondensing Shock operating Frames 6 Frame 7 Frames 8 Based on voltage. See this table and the footnotes that are based on EN60-5- (Electro-thermal Safety Standard for drives). System and Ground Configuration Overvoltage Category (2) Altitude Limit Above Sea Level, mm (ft) (3)(4) 8/2V AC 0/4V AC 0V AC 6V AC Center grounded (Y neutral) II (2) 00 (29,527.5) (5) 00 (29,527.5) (5) (24,6.3) (5) (24,6.3) (5) With solid ground III (3) 00 (29,527.5) (5) 40 (5,748.0) 40 (5,748.0) 40 (5,748.0) Ungrounded, impedance () II (2) 00 (29,527.5) (5) 40 (5,748.0) (24,6.3) (5) 40 (5,748.0) Grounded, or corner grounded () III (3) 40 (5,748.0) 00 (6,56.7) 40 (5,748.0) 00 (6,56.7) () In CE installations, Frame drives do not support ungrounded or corner grounded configurations. (2) Category II (Isolation Transformer Level) - Typically two levels of isolation or protection from outdoor power lines. Category III (most common) Distribution Level Inside a Building - Typically one level of isolation or protection from outdoor power lines. (3) Excluding failure from cosmic radiation. Cosmic radiation increases rate of IGBT malfunction at altitudes greater than 00 m (9842.6) above sea level. Concrete walls and ceilings or concrete walls and large bottles of water overhead are examples of ways to shield against cosmic radiation. (4) Frame drives are limited to a maximum of 00 m (6,56.7 ft) thermally. See Derating Guidelines on page 9. (5) Drive is limited to a maximum of 40 m (5,748.0 ft) thermally. See Derating Guidelines on page 9. 5 g peak for ms duration (±.0 ms) g peak for ms duration (±.0 ms) Power core - g peak for ms duration (±.0 ms) in cabinet with option bay 5 g peak for ms duration (±.0 ms) Rockwell Automation Publication 7-TD00K-EN-P - October 7 9

PowerFlex 7-Series AC Drives Environmental Specifications (continued) Category Shock packaged for shipment Frames and 2 Frames 3 and 4 Frame 5 Frames 6 Vibration operating Frames and 2 Frames 3 5 Frames 6 and 7 Frames 8 Vibration packaged for shipment, sinusoidal loose load Vibration packaged for shipment, random secured Required airflow Sound IMPORTANT: Sound pressure level is measured at 2 m (6.7 ft). Surrounding environment pollution degree Pollution Degree and 2 Pollution Degree 3 and 4 Specification Frames 5 Frames 6 Frames 5 38 mm (5 in.) drop height 3 mm (3 in.) drop height 5 mm (2 in.) drop height Meets International Safe Transit Association (ISTA) test procedure 2B.000 mm (0.0 in.) displacement, 2 g peak.000 mm (0.0 in.) displacement,.5 g peak.000 mm (0.0 in.) displacement, g peak Power core, drive in cabinet with option bay.000 mm (0.0 in.) displacement, g peak.0 mm (0.8 in.) peak to peak, 2 5.86 Hz;. g peak from 5.86 Hz Meets ISTA 2B packaging standards Frequency (Hz) 4 6 0 PSD (g 2 /Hz) 0.00005 0.0 0.0 0.00 0.00 0.0000 Frames 6 Meets International Safe Transit Association (ISTA) test procedure 2B. Frame and 2 3 4 5 6 Frame and 2 3 4 5 6 Total fan airflow 84.95 m 3 /h ( CFM) 35.92 m 3 /h ( CFM) 543.68 m 3 /h (3 CFM) 883.49 m 3 /h (5 CFM) 856. m 3 /h (4CFM) Sound level 63 db 64 db 72 db 77 db 73 db See page 88 for descriptions of each pollution degree rating. All enclosures acceptable. Enclosure that meets or exceeds IP54, NEMA/UL Type 2 required. () Maximum surrounding air temperature of C (22 F) with derating. See Derating Guidelines on page 9. Frame 7 8 9 Frame 7 8 9 Total fan airflow 284.45 m 3 /h (756 CFM) 2293.67 m 3 /h (3 CFM) 4587.33 m 3 /h (20 CFM) 68.99 m 3 /h ( CFM) Sound level 74 db 79 db 79 db 83 db Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Technical Specifications Category Protection Specification Motor Voltage 0/8V 2V 3/0V 4V 0V 6V AC input overvoltage trip 288V AC 288V AC 576V AC 576V AC 825V AC 825V AC AC input undervoltage trip 25V AC V AC 2V AC 0V AC 0V AC 0V AC Bus overvoltage trip 8V DC 8V DC 85V DC 85V DC 67V DC 67V DC Bus undervoltage shutoff Frames 7 Frames 8 V DC V DC 0V DC 0V DC 0V DC 0V DC 0V DC (Frames 3 7) 0V DC Nominal bus voltage (full load) 28V DC 324V DC 5V DC 648V DC 8V DC 932V DC Drive overcurrent trip Software overcurrent trip Instantaneous current limit Hardware overcurrent trip Line transients Control logic noise immunity Power ride-through 0% of drive rated 0% of 3 s rating (58 2%) 43% of 3 s rating (25 287%) Up to 00V peak per IEEE C62.4-99 Showering arc transients up to V peak 5 ms at full load 0V DC (Frames 6 and 7) 0V DC Logic control ride-through Ground fault trip Short circuit trip 0.5 s min, 2 s typical Phase-to-ground on drive output Phase-to-phase on drive output Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Technical Specifications (continued) Category Specification Electrical AC input voltage tolerance See Input Voltage Tolerance on page 4 for full power and operating range. Frequency tolerance 47 63 Hz Input phases Three-phase input provides full rating for all drives. For Frames 7 (output current up to 456 A), single-phase operation provides up to % of rated current at 25 C (77 F) surrounding temperature. Single-phase operation is not recommended for Frames 8 and larger. DC input voltage tolerance ±% of nominal bus voltage (see Nominal bus voltage (full load) on page ) Displacement power factor 0.98 across entire speed range DC link impedance 4% Efficiency 97.5% at rated amps, nominal line volts Maximum short circuit rating 0,000 A RMS symmetrical (F and G drives only) Actual short circuit rating Determined by AIC rating of installed fuse/circuit breaker. See page 73 for 2G drives. Drive to motor power ratio Min Max Brake IGBT rating Control POD current draw Digital inputs Nominal Maximum High state Low state PTC inputs Standard Trip resistance Nominal resistance Reset resistance Short circuit trip resistance Recommended not less than :2 ratio Recommended not greater than 2: ratio 0% of motor-rated torque 5 A DC 24V DC V DC 24V DC 0 5V DC PowerFlex 753 MCB N/A () 3. kω.8 kω 2.2 kω N/A (2) AC V AC 32V AC 0 32V AC 0 V AC 22-Series I/O option module DIN 482 3. kω.8 kω 2.2 kω Ω ATEX option module for -Series I/O option module IEC 94-8 3.2 kω.6 kω N/A (3) 0 Ω Battery () Not designed to a standard. (2) No short circuit fault. (3) No hysteresis, fault is latched. User-installed CR2 lithium coin cell battery provides power to the real-time clock (optional, not supplied). Preserves the clock setting in the event power to the drive is lost or cycled. Approximate life is 4.5 years with drive unpowered, or lifetime if drive is powered. 2 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Technical Specifications (continued) Category Specification Control Method Sine coded PWM with programmable carrier frequency. Ratings apply to all drives. Carrier frequency Default settings Frames 3 4 khz Frames 4 2 khz Settings Frames 6 2, 4, 8, 2 khz () (2) Frame 7 2, 4, 8 khz () Frames 8 2, 4 khz Output voltage range 0 to rated motor voltage Output frequency range 0 325 Hz at 2 khz carrier 0 5 Hz at 4 khz carrier Frequency accuracy Digital input Analog input Frequency control Speed control Torque regulation Within ±0.0% of set output frequency Within ±0.4% of maximum output frequency Speed regulation with slip compensation (V/Hz and Sensorless Vector modes) 0.5% of base speed across : speed range, : operating range Without feedback (Flux Vector mode), 0.% of base speed across 0: speed range, : operating range, rad/s bandwidth With feedback (Flux Vector mode), 0.00% of base speed across 0: speed range, 00: operating range, rad/s bandwidth Without feedback (Flux Vector mode), ±5%, 0 rad/s bandwidth With feedback (Flux Vector mode), ±2%, 20 rad/s bandwidth Selectable motor control Standard V/Hz with full custom capability Sensorless Vector mode with full tuning Flux Vector mode with and without a feedback device Induction motor control Surface-mount permanent magnet motor control with encoder feedback (Frames ) (3) Surface-mount permanent magnet motor control without encoder feedback (Frames 7) (3) Internal permanent-magnet motor control with encoder feedback (Frames ) Internal permanent-magnet motor control without encoder feedback (Frames 7) Stop modes Multiple programmable stop modes including - Ramp, Coast, DC-Brake, Ramp-to-Hold, Fast Braking, and Current Limit Stop. Accel/Decel Two independently programmable accel and decel times. Each time can be programmed from 0 seconds in 0. second increments (0 to motor nameplate speed). S-curve time Adjustable from 0 0% of ramp time (normal duty rating) Intermittent overload Light duty (only Frames % overload capability for up to min out of mins 8 ) Normal duty % overload capability for up to min out of mins % overload capability for up to 3 s out of s Heavy duty % overload capability for up to min out of mins % overload capability for up to 3 s out of s Current limit capability Proactive current limit programmable from % of rated output current. Independently programmable proportional and integral gain. Electronic motor overload protection () Frames 6 and 7 0/6V AC input drives can be set to 2 khz or 4 khz. (2) Frames 3 5 0/6V AC input drives can be set to 2, 4, or 8 khz. (3) Only PowerFlex 755 drives. Class motor overload protection according to NEC article 4 and motor over-temperature protection according to NEC article 4.26 (A)(2). UL 8C File E59272. Rockwell Automation Publication 7-TD00K-EN-P - October 7 3

PowerFlex 7-Series AC Drives Design Considerations This section provides information for design considerations. Input Voltage Tolerance Drive Rating Nominal Line Voltage Nominal Motor Voltage Drive Full Power Range Drive Operating Range 0 2 0 0 0 264 264 8 8 8 264 2 2 2 264 3 4 3 3 3 528 342 528 0 0 0 528 4 4 4 528 0 6 0 575 575 759 57 759 6 6 6 759 Hp @ Motor (Drive Output) No Drive Output Nominal Motor Voltage -% Nominal Motor Voltage Derated Power Range Full Power Range Drive Operating Range Actual Line Voltage (Drive Input) Drive Rated Voltage Drive Rated Voltage +% Drive full power range = Drive operating range = Nominal motor voltage to drive-rated voltage + %. Rated current is available across the entire drive full-power range. Lowest nominal motor voltage - % to drive-rated voltage + %. Drive output is linearly derated when actual line voltage is less than the nominal motor voltage EXAMPLE Calculate the maximum power of a 5.0 Hp, 4V motor connected to a 4V-rated drive supplied with 342V actual line voltage input. Actual line voltage/nominal motor voltage = 74.3% 74.3% x 5.0 Hp = 3.7 Hp 74.3% x Hz = 44.6 Hz At 342V actual line voltage, the maximum power the 5.0 Hp, 4V motor can produce is 3.7 Hp at 44.6 Hz. Hp @ Motor (Drive Output) 5 Hp 3.7 Hp No Drive Output 342V 4V Actual Line Voltage (Drive Input) 4V 528V IMPORTANT For maximum protection of the drive and its internal components, we recommend the use of semiconductor fuses to other methods of circuit protection. Semiconductor fuses reduce the risk of drive damage from power quality events and improves machine and process utilization. 4 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Approximate Watts Loss The following table lists watts loss data for PowerFlex 7-Series drives running at full load, full speed, and default carrier frequency. Internal watts are the watts that the control structure of the drive dissipates into the cabinet, regardless of mounting style. External watts are the watts that are dissipated directly through the heatsink and are outside the cabinet for flange mount, and inside the cabinet for other mounting types. Watts Loss for 8/2V Drives Drive Cat. No. () (2) Normal Duty kw () Select the watts loss based on the catalog number. (2) Frames 8, enclosure codes B, J, L, P, and W. (3) Frame watts loss in parentheses. External Watts (3) Internal Watts (3) Total Drive Cat. No. () (2) Normal Duty External Watts (3) Watts (3) Continuous Hp Continuous Output (3) Output Internal Watts (3) Total Watts (3) 8 Volt 2 Volt x B2P2 0.37 2.5 34 (23) 57 (57) 9 () x B2P2 0.5 2.2 29 () 6 (56) (76) x B4P2 0.75 4.8 63 (46) (62) 24 (8) x B4P2 4.2 52 () 63 () 5 (0) x B6P8.5 7.8 (72) 64 (75) 44 (47) x B6P8 2 6.8 67 (6) 66 (7) 33 (32) x B9P6 2.2 (99) (82) (8) x B9P6 3 9.6 92 (84) 7 (76) 63 () x B05 4 7.5 (5.3) 69 (57) 76 (79) 245 (236) x B05 5 5.3 4 (58) 76 () 27 (238) x B022 5.5 22 237 87 324 x B022 7.5 22 2 92 33 x B028 7.5 32.2 328 4 432 x B028 28 272 98 3 x B042 43 459 22 58 x B042 5 42 458 25 583 x B054 5 5 32 637 x B054 54 439 28 567 x B0 8.5 78.2 643 52 796 x B0 25 557 46 3 x B0 22 92 788 8 969 x B0 653 63 86 x B4 54 274 327 x B4 4 874 252 26 x B 37 84 266 449 x B 997 248 245 x B54 45 77 492 37 8 x B54 54 2 288 538 x B92 55 22 92 3 2324 x B92 75 92 597 355 952 x B2 66 2 248 499 297 x B2 0 2 2426 53 2939 x B32 359 3 56 368 x B32 25 32 22 49 94 x B3 44 3384 646 29 x B3 3 287 557 3373 x B477 32 477 435 789 4924 x B477 0 477 456 8 4966 Rockwell Automation Publication 7-TD00K-EN-P - October 7 5

PowerFlex 7-Series AC Drives () (2) Watts Loss for 0/4V Drives () (2) Drive Cat. No. Normal Duty External Internal Total Internal Total kw Continuous Watts (3) Watts (3) Drive Cat. No. Normal Duty External Watts (3) Watts (3) Hp Continuous Watts (3) Watts (3) Output Output 0 Volt 4 Volt x C2P 0.75 2. 6 (6) 55 (56) 7 (72) x D2P.0 2. 7 (2) (6) 77 (82) x C3P5.5 3.5 26 (33) 57 () 83 (93) x D3P4 2.0 3.4 27 (39) 6 (64) 88 (3) x C5P0 2.2 5 39 (44) 58 (62) 97 (6) x D5P0 3.0 5 4 (54) 63 (67) 4 (2) x C8P7 4.0 8.7 75 (79) 64 () 39 (59) x D8P0 5.0 8 7 (9) 68 (82) 39 (73) x C0 5.5.5 8 (7) (85) 78 (92) x D0 7.5 8 (8) 74 (88) 82 (6) x C05 7.5 5.4 6 (66) () 24 (246) x D04 4 49 (52) 8 (8) 2 (233) x C022 22 225 86 3 x D022 5 22 237 9 328 x C0 5 0 3 3 x D027 27 273 374 x C037 8.5 37 362 5 477 x D034 25 34 368 5 483 x C043 22 43 5 26 63 x D0 3 26 629 x C0 487 67 x D052 52 422 25 547 x C072 37 72 65 47 762 x D065 65 559 44 3 x C085 45 85 5 62 867 x D077 77 646 58 4 x C4 55 4 928 29 x D096 75 96 855 89 44 x C 75 239 39 558 x D25 0 25 9 299 8 x C 38 0 68 x D56 25 56 299 294 593 x C5 5 893 38 2274 x D86 86 78 358 76 x C2 32 2 2449 2 295 x D248 0 248 2384 492 2876 x C2 2 2566 46 27 x D2 2 2 24 49 395 x C367 0 367 3322 586 38 x D36 0 36 39 6 5 x C456 2 456 3922 743 4665 x D45 3 45 34 683 4287 2xG C4 2 4 4779 5869 2xG D4 3 4 4385 97 5356 x C477 2 477 499 793 4992 x D477 0 477 4392 828 52 2xG C5 35 5 536 26 6532 2xG D485 0 485 9 26 627 2xG C567 35 567 5652 298 69 2xG D545 4 545 5649 253 62 2xG C6 355 6 577 8588 2xG D67 0 67 6942 489 843 2xG C7 0 7 7577 726 93 2xG D7 0 7 763 659 92 2xG C7 0 7 86 848 9934 2xG D7 6 7 833 776 99 2xG C9 0 9 955 225 6 2xG D0 0 0 87 226 926 2xG CK0 5 9732 2357 89 2xG D9 0 9 9696 239 87 2xG CK 6 745 2548 3293 2xG DK0 0 45 784 2589 3373 2xG CK2 7 75 3778 2978 6756 2xG DK2 00 35 3378 2899 6277 2xG CK4 0 465 3959 3 6973 2xG DK3 0 365 55 25 2xG CK5 8 4 544 38 8749 2xG DK4 2 4 5573 334 8887 2xG CK6 0 5 5569 377 9286 2xG DK5 3 525 569 3779 9398 2xG C2K 2 2 223 47 27 2xG D2K0 7 22495 42 27297 () Select the watts loss based on the catalog number. (2) Frames 8, enclosure codes B, J, L, P, and W. (3) Frame watts loss in parentheses. 6 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Watts Loss for 0/6V Drives () (2) Drive Cat. No. Normal Duty External Internal Total Watts Drive Cat. No. () (2) Normal Duty External Internal Total kw Continuous Watts Watts Hp Continuous Watts Watts Watts Output Output 6 Volt 0 Volt x EP7.0.7 23 5 38 x E2P7 2.0 2.7 7 57 x E3P9 3.0 3.9 5 8 69 x E6P 5.0 6. 22 3 x E9P0 7.5 9 22 29 x E0 52 34 86 x F02 7.5 2 69 29 x E02 2 68 27 x E07 5 7 249 54 2 x F05 5 226 56 282 x E08 5 8 269 6 33 x E022 22 329 74 3 x F0 5 296 65 36 x E023 23 332 3 x F023 8.5 23 327 397 x E024 24 326 7 397 x E027 25 27 4 84 494 x F0 22 428 85 53 x E028 25 28 375 79 453 x E032 32 3 5 8 x F034 34 478 94 573 x E033 33 439 528 x E04 4 5 28 78 x F046 37 46 649 26 775 x E042 42 555 2 667 x E052 52 784 76 959 x F0 45 699 38 836 x E053 53 7 44 855 x F06 55 6 7 89 x E063 63 757 32 889 x F082 75 82 44 82 226 x E077 75 77 935 66 x F098 98 3 23 54 x E099 0 99 269 229 499 x F9 9 658 2 96 x E25 25 25 678 38 996 x F42 32 42 03 387 239 x E44 44 9 389 2349 x F7 7 2655 389 44 x E92 0 92 2 433 3234 x F22 0 22 3375 53 3889 x E242 2 242 3642 593 4235 x F263 2 263 4286 6 4976 x E289 0 289 4437 762 2xG F265 2 265 434 996 53 2xG E295 0 295 4592 5622 2xG F3 35 3 5 27 6287 2xG E355 3 355 59 3 632 2xG F3 355 3 53 233 36 2xG E395 0 395 582 2 52 2xG F45 0 45 5865 2 76 2xG E435 4 435 55 63 6753 2xG F4 4 4 6638 337 7975 2xG E4 0 4 67 78 2xG F0 0 0 77 47 8534 2xG E5 0 5 6946 396 8342 2xG F5 5 5 894 77 9 2xG E595 0 595 83 53 956 2xG F6 6 6 9865 22 85 2xG E6 0 6 9942 2225 267 2xG F7 7 7 36 2425 356 2xG E7 0 7 93 2424 357 2xG F765 7 765 39 2368 37 2xG E825 0 825 46 2342 3389 2xG F795 0 795 2663 26 5275 2xG E0 9 0 2225 2539 4764 2xG F9 0 8 38 2767 6375 2xG E9 00 9 32 29 59 2xG FK0 00 647 3545 9692 2xG EK 0 669 3552 97 2xG FK4 976 34 237 2xG EK4 4 9256 3966 23222 () Select the watts loss based on the catalog number. (2) Frames 8, enclosure codes B, L, P, and W. Rockwell Automation Publication 7-TD00K-EN-P - October 7 7

PowerFlex 7-Series AC Drives Additional Watts Loss for Cabinet Options Bay Drive Cat. No. () Normal Duty Cabinet Options Bay Drive Cat. No. () Normal Duty Cabinet Options Bay kw Continuous Output Hp Continuous Output Without Input or Output Line Reactor (Watts) (2) With Input or Output Line Reactor (Watts) (2) () Select the watts loss based on the catalog number. (2) For MCC power bus options, add the following watts: 2 A power bus = 88 watts; 00 A power bus = 26 watts; A power bus = 42 watts. Without Input or Output Line Reactor (Watts) (2) 0V 4V 2G C4 2 4 29 626 2G D4 3 4 77 652 2G C5 35 5 256 735 2G D485 0 485 4 652 2G C567 35 567 2 792 2G D545 4 545 239 725 2G C6 355 6 359 23 2G D67 0 67 295 983 2G C7 0 7 4 549 2G D7 0 7 355 4 2G C7 0 7 44 692 2G D7 6 7 388 542 2G C9 0 9 327 2425 2G D0 0 0 246 867 2G CK0 5 3 265 2G D9 0 9 364 2325 2G CK 6 384 292 2G DK0 0 45 353 2677 2G CK2 7 75 446 3384 2G DK2 00 35 46 358 2G CK4 0 465 662 35 2G DK3 0 365 574 56 2G CK5 8 4 675 3593 2G DK4 2 4 622 37 6V 0V 2G F265 2 265 266 2G E295 0 295 233 838 2G F3 35 3 4 67 2G E355 3 355 289 2 2G F3 355 3 343 288 2G E395 0 395 328 759 2G F45 0 45 379 547 2G E435 4 435 354 8 2G F4 4 4 2 95 2G E4 0 4 379 327 2G F0 0 0 25 35 2G E5 0 5 4 4 2G F5 5 5 34 267 2G E595 0 595 36 659 2G F6 6 6 62 375 2G E6 0 6 53 8 2G F7 7 7 94 2362 2G E7 0 7 222 26 2G F765 7 765 225 2742 2G E825 0 825 269 396 2G F795 0 795 243 296 2G E0 9 0 3 2372 2G F9 0 9 364 2699 2G E9 00 9 3 2744 With Input or Output Line Reactor (Watts) (2) 8 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Derating Guidelines If a catalog number is not shown, you can operate that drive without derating as long as the limits specified on page 9 and page are followed. Ambient Temperature/Load and Altitude/Load 8V AC (Frames 7) Cat. No. (see page 9) 8V AC Power Rating Derating for IP NEMA/UL Type Open (Frames 5) and IP00 NEMA/UL Type Open (Frames 6 and 7) () Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load kw Cont. kw Cont. kw Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) x B6P8 (Frame ).5 7.8 0.75 4.8 0 0 0 0 00 00 20 00 00 40 40 x B9P6 (Frame ) 2.2.5 7.8 0 0 0 0 00 00 20 00 00 40 40 x B05 (Frame ) 4 5.3 2.2 0 0 0 0 00 00 20 00 00 40 40 x B05 (Frame 2) 4 7.5 2.2 0 0 0 0 00 00 20 00 00 40 40 Rockwell Automation Publication 7-TD00K-EN-P - October 7 9

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 8V AC (Frames 7) (continued) Cat. No. (see page 9) 8V AC Power Rating Derating for IP NEMA/UL Type Open (Frames 5) and IP00 NEMA/UL Type Open (Frames 6 and 7) () Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load kw Cont. kw Cont. kw Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) x B022 5.5 22 4 7.5 0 0 0 0 00 00 20 00 00 40 40 x B028 7.5 32.2 5.5 22 x B042 43 7.5 32.2 x B054 5 43 x B0 8.5 78.2 5 0 0 0 0 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 8V AC (Frames 7) (continued) Cat. No. (see page 9) 8V AC Power Rating Derating for IP NEMA/UL Type Open (Frames 5) and IP00 NEMA/UL Type Open (Frames 6 and 7) () Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load kw Cont. kw Cont. kw Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) x B0 22 92 8.5 78.2 x B4 22 92 x B 37 5 x B54 45 77 37 x B92 55 22 45 77 0 0 0 0 0 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 Rockwell Automation Publication 7-TD00K-EN-P - October 7 2

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 8V AC (Frames 7) (continued) Cat. No. (see page 9) 8V AC Power Rating Derating for IP NEMA/UL Type Open (Frames 5) and IP00 NEMA/UL Type Open (Frames 6 and 7) () Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load kw Cont. kw Cont. kw Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) x B2 66 2 55 22 x B32 359 66 2 x B3 44 359 x B477 32 477 359 0 0 0 0 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 () Other enclosure types follow the same derating, while not exceeding, the maximum surrounding air temperature listed in Environmental Specifications on page 9. 22 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 2V AC (Frames 7) Cat. No. (see page 9) 2V AC Power Rating Derating for IP NEMA/UL Type Open (Frames 5) and IP00 NEMA/UL Type Open (Frames 6 and 7) () Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load Hp Cont. Hp Cont. Hp Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) x B6P8 (Frame ) 2 6.8 4.2 0 0 0 0 00 00 20 00 00 40 40 x B9P6 (Frame ) 3 9.6 2 6.8 0 0 0 0 00 00 20 00 00 40 40 x B05 (Frame ) 5 5.3 3 9.6 0 0 0 0 00 00 20 00 00 40 40 x B05 (Frame 2) 5 5.3 3 9.6 0 0 0 0 00 00 20 00 00 40 40 x B022 7.5 22 5 5.3 0 0 0 0 00 00 20 00 00 40 40 Rockwell Automation Publication 7-TD00K-EN-P - October 7 23

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 2V AC (Frames 7) (continued) Cat. No. (see page 9) 2V AC Power Rating Derating for IP NEMA/UL Type Open (Frames 5) and IP00 NEMA/UL Type Open (Frames 6 and 7) () Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load Hp Cont. Hp Cont. Hp Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) x B028 28 7.5 22 x B042 5 42 28 x B054 54 5 42 x B0 25 54 x B0 25 75 0 0 0 0 0 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 24 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 2V AC (Frames 7) (continued) Cat. No. (see page 9) 2V AC Power Rating Derating for IP NEMA/UL Type Open (Frames 5) and IP00 NEMA/UL Type Open (Frames 6 and 7) () Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load Hp Cont. Hp Cont. Hp Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) x B4 4 x B 4 x B54 54 x B92 75 92 54 x B2 0 2 75 92 0 0 0 0 0 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 Rockwell Automation Publication 7-TD00K-EN-P - October 7 25

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 2V AC (Frames 7) (continued) Cat. No. (see page 9) 2V AC Power Rating Derating for IP NEMA/UL Type Open (Frames 5) and IP00 NEMA/UL Type Open (Frames 6 and 7) () Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load Hp Cont. Hp Cont. Hp Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) x B32 25 32 0 2 x B3 3 25 32 x B477 0 477 25 32 0 0 0 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 () Other enclosure types follow the same derating, while not exceeding, the maximum surrounding air temperature listed in Environmental Specifications on page 9. 26 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 0V AC (Frames 7) Cat. No. (see page 9) 0V AC Power Rating Derating for IP NEMA/UL Type Open (Frames 5) and IP00 NEMA/UL Type Open (Frames 6 and 7) () Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load kw Cont. kw Cont. kw Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) x C8P7 (Frame ) 4.0 8.7 2.2 5.0 0 0 0 0 00 00 20 00 00 40 40 x C0 (Frame ) 5.5.5 4.0 8.7 0 0 0 0 00 00 20 00 00 40 40 x C05 (Frame ) 7.5 5.4 5.5.5 0 0 0 0 00 00 20 00 00 40 40 x C05 (Frame 2) 7.5 5.4 5.5.5 0 0 0 0 00 00 20 00 00 40 40 x C022 22 7.5 5.4 0 0 0 0 00 00 20 00 00 40 40 Rockwell Automation Publication 7-TD00K-EN-P - October 7 27

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 0V AC (Frames 7) (continued) Cat. No. (see page 9) 0V AC Power Rating Derating for IP NEMA/UL Type Open (Frames 5) and IP00 NEMA/UL Type Open (Frames 6 and 7) () Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load kw Cont. kw Cont. kw Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) x C0 5 22 x C037 8.5 37 5 x C043 22 43 8.5 37 x C0 22 43 x C072 37 72 0 0 0 0 0 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 28 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 0V AC (Frames 7) (continued) Cat. No. (see page 9) 0V AC Power Rating Derating for IP NEMA/UL Type Open (Frames 5) and IP00 NEMA/UL Type Open (Frames 6 and 7) () Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load kw Cont. kw Cont. kw Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) x C085 45 85 37 72 x C4 55 4 45 85 x C 75 55 4 x C 75 x C5 5 0 0 0 0 0 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 Rockwell Automation Publication 7-TD00K-EN-P - October 7 29

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 0V AC (Frames 7) (continued) Cat. No. (see page 9) 0V AC Power Rating Derating for IP NEMA/UL Type Open (Frames 5) and IP00 NEMA/UL Type Open (Frames 6 and 7) () Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load kw Cont. kw Cont. kw Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) x C2 32 2 5 x C2 2 32 2 x C367 0 367 2 x C456 2 456 0 367 x C477 2 477 0 367 0 0 0 0 0 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 () Other enclosure types follow the same derating, while not exceeding, the maximum surrounding air temperature listed in Environmental Specifications on page 9. Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 0V AC (Frames 8 ) Cat. No. (see page 9) 0V AC, Power Rating at C (4 F) (Power Rating at C [22 F]) Derating for IP NEMA/UL Type (Frames 8 ), IP00 NEMA/UL Type 0 (Frames 8 ), and IP54 NEMA/UL Type 2 (Frames 8 ) Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load kw Cont. kw Cont. kw Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) 2xG C4 35 (0) 5 (42) 2 (86) 4 (359) 0 () 385 (0) 0 0 0 0 00 00 20 00 00 40 40 2xG C5 35 (2) 585 (456) 35 (224) 5 (42) 2 (86) 456 (356) 0 0 0 0 00 00 20 00 00 40 40 2xG C567 355 (2) 62 (477) 35 (2) 567 (442) 2 (0) 472 (368) 0 0 0 0 00 00 20 00 00 40 40 2xG C6 0 (35) 7 (585) 355 (0) 6 (7) 35 (224) 5 (42) 0 0 0 0 00 00 20 00 00 40 40 2xG C7 4 (35) 796 (62) 0 (35) 7 (585) 35 (2) 585 (456) 0 0 0 0 00 00 20 00 00 40 40 Rockwell Automation Publication 7-TD00K-EN-P - October 7 3

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 0V AC (Frames 8 ) (continued) Cat. No. (see page 9) 0V AC, Power Rating at C (4 F) (Power Rating at C [22 F]) Derating for IP NEMA/UL Type (Frames 8 ), IP00 NEMA/UL Type 0 (Frames 8 ), and IP54 NEMA/UL Type 2 (Frames 8 ) Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load kw Cont. kw Cont. kw Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) 2xG C7 4 (355) 832 (649) 0 (355) 7 () 355 (0) 642 () 0 0 0 0 00 00 20 00 00 40 40 2xG C9 5 (425) (8) 0 (375) 9 (7) 0 (35) 7 (585) See 2xG C4 See 2xG C4 2xG CK0 6 (475) (8) 5 (425) (8) 0 (355) 8 (686) See 2xG C5 See 2xG C5 2xG CK 7 (0) 75 (97) 6 (475) (8) 0 (375) 9 (7) See 2xG C567 See 2xG C567 2xG CK2 0 (6) 465 (43) 7 (0) 75 (97) 5 (425) (8) See 2xG C6 See 2xG C6 2xG CK4 8 (6) 4 (54) 0 (6) 465 (43) 6 (4) (8) See 2xG C7 See 2xG C7 2xG CK5 0 (7) (248) 8 (6) 4 (54) 7 (0) 75 (97) See 2xG C7 See 2xG C7 2xG CK6 00 (7) 75 (338) 0 (7) 5 (2) 7 (0) 325 (34) See 2xG C567 See 2xG C567 2xG C2K (00) 23 (87) 2 (9) 2 (677) 00 (7) 0 (4) See 2xG C7 See 2xG C7 32 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 4V AC (Frames 7) Cat. No. (see page 9) 4V AC Power Rating Derating for IP NEMA/UL Type Open (Frames 5) and IP00 NEMA/UL Type Open (Frames 6 and 7) () Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load Hp Cont. Hp Cont. Hp Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) x D8P0 (Frame ) 5.0 8.0 3.0 5.0 0 0 0 0 00 00 20 00 00 40 40 x D0 (Frame ) 7.5 5.0 8.0 0 0 0 0 00 00 20 00 00 40 40 x D04 (Frame ) 4 7.5 0 0 0 0 00 00 20 00 00 40 40 x D04 (Frame 2) 4 7.5 0 0 0 0 00 00 20 00 00 40 40 x D022 5 22 4 0 0 0 0 00 00 20 00 00 40 40 Rockwell Automation Publication 7-TD00K-EN-P - October 7 33

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 4V AC (Frames 7) (continued) Cat. No. (see page 9) 4V AC Power Rating Derating for IP NEMA/UL Type Open (Frames 5) and IP00 NEMA/UL Type Open (Frames 6 and 7) () Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load Hp Cont. Hp Cont. Hp Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) x D027 27 5 22 x D034 25 34 27 x D0 25 34 x D052 52 x D065 65 52 0 0 0 0 0 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 34 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 4V AC (Frames 7) (continued) Cat. No. (see page 9) 4V AC Power Rating Derating for IP NEMA/UL Type Open (Frames 5) and IP00 NEMA/UL Type Open (Frames 6 and 7) () Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load Hp Cont. Hp Cont. Hp Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) x D077 77 65 x D096 75 96 77 x D25 0 25 75 96 x D56 25 56 0 25 x D86 86 25 56 0 0 0 0 0 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 Rockwell Automation Publication 7-TD00K-EN-P - October 7 35

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 4V AC (Frames 7) (continued) Cat. No. (see page 9) 4V AC Power Rating Derating for IP NEMA/UL Type Open (Frames 5) and IP00 NEMA/UL Type Open (Frames 6 and 7) () Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load Hp Cont. Hp Cont. Hp Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) x D248 0 248 86 x D2 2 2 0 248 x D36 0 36 2 2 x D45 3 45 0 36 x D477 0 477 0 36 0 0 0 0 0 0 0 0 0 00 00 20 00 00 40 40 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 () Other enclosure types follow the same derating, while not exceeding, the maximum surrounding air temperature listed in Environmental Specifications on page 9. 36 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 4V AC (Frames 8 ) Cat. No. (see page 9) 4V AC Power Rating at C (4 F) (Power Rating at C [22 F]) Derating for IP NEMA/UL Type (Frames 8 ), IP00 NEMA/UL Type 0 (Frames 8 ), and IP54 NEMA/UL Type 2 (Frames 8 ) Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load Hp Cont. Hp Cont. Hp Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) 2xG D4 0 (0) 485 (378) 3 (2) 4 (335) 0 (2) 3 (289) 0 0 0 0 00 00 20 00 00 40 40 2xG D485 4 (3) 545 (425) 0 (0) 485 (378) 3 (2) 44 (323) 0 0 0 0 00 00 20 00 00 40 40 2xG D545 0 (0) 5 (4) 4 (3) 545 (425) 3 (0) 454 (354) 0 0 0 0 00 00 20 00 00 40 40 2xG D67 0 (4) 7 (554) 0 (0) 67 (48) 0 (0) 485 (378) 0 0 0 0 00 00 20 00 00 40 40 2xG D7 6 (0) 765 (597) 0 (4) 7 (554) 4 (3) 545 (425) 0 0 0 0 00 00 20 00 00 40 40 Rockwell Automation Publication 7-TD00K-EN-P - October 7 37

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 4V AC (Frames 8 ) (continued) Cat. No. (see page 9) 4V AC Power Rating at C (4 F) (Power Rating at C [22 F]) Derating for IP NEMA/UL Type (Frames 8 ), IP00 NEMA/UL Type 0 (Frames 8 ), and IP54 NEMA/UL Type 2 (Frames 8 ) Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load Hp Cont. Hp Cont. Hp Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) 2xG D7 0 (0) 0 (624) 6 (4) 7 (577) 0 (0) 67 (48) 0 0 0 0 00 00 20 00 00 40 40 2xG D0 0 (6) 9 (749) 0 (0) 0 (624) 0 (4) 7 (554) See 2xG D4 See 2xG D4 2xG D9 0 (7) 45 (85) 0 (6) 9 (749) 0 (0) 795 (6) See 2xG D485 See 2xG D485 2xG DK0 00 (8) 35 (885) 0 (0) 45 (85) 7 (0) 0 (624) See 2xG D545 See 2xG D545 2xG DK2 0 (0) 365 (65) 00 (0) 35 (885) 0 (0) 9 (749) See 2xG D67 See 2xG D67 2xG DK3 2 (9) 4 (8) 0 (0) 365 (65) 0 (0) 45 (85) See 2xG D7 See 2xG D7 2xG DK4 3 (00) 5 () 2 (9) 4 (8) 00 (7) 35 (885) See 2xG D7 See 2xG D7 2xG DK5 (0) 655 (29) 3 (00) 525 () 0 (0) 2 (99) See 2xG D545 See 2xG D545 2xG D2K0 00 (6) 22 (747) 7 (3) (65) 6 (0) 7 (349) See 2xG D7 See 2xG D7 38 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 0V AC (Frames 3 7) Cat. No. (see page 9) 0V AC Power Rating Derating for IP NEMA/UL Type Open (Frames 3 5), and IP00 NEMA/UL Type Open (Frames 6 and 7) Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load Hp Cont. Hp Cont. Hp Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) x E07 5 7 x E022 22 5 7 x E027 25 27 22 x E032 32 25 27 x E04 4 32 0 0 0 0 0 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 Rockwell Automation Publication 7-TD00K-EN-P - October 7 39

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 0V AC (Frames 3 7) (continued) Cat. No. (see page 9) 0V AC Power Rating Derating for IP NEMA/UL Type Open (Frames 3 5), and IP00 NEMA/UL Type Open (Frames 6 and 7) Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load Hp Cont. Hp Cont. Hp Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) x E052 52 4 x E099 0 99 75 77 x E25 25 25 0 99 x E44 44 25 25 x E92 0 92 44 0 0 0 0 0 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 0V AC (Frames 3 7) (continued) Cat. No. (see page 9) 0V AC Power Rating Derating for IP NEMA/UL Type Open (Frames 3 5), and IP00 NEMA/UL Type Open (Frames 6 and 7) Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load Hp Cont. Hp Cont. Hp Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) x E242 2 242 0 92 x E289 0 289 2 242 0 0 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 Rockwell Automation Publication 7-TD00K-EN-P - October 7 4

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 0V AC (Frames 8 ) Cat. No. (see page 9) 0V AC Power Rating at C (4 F) (Power Rating at C [22 F]) Derating for IP NEMA/UL Type (Frames 8 ), IP00 NEMA/UL Type 0 (Frames 8 ), and IP54 NEMA/UL Type 2 (Frames 8 ) Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load Hp Cont. Hp Cont. Hp Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) 2xG E295 3 (2) 355 (277) 0 (0) 295 (2) 2 (0) 272 (22) 0 0 0 0 00 00 20 00 00 40 40 2xG E355 0 (0) 395 (8) 3 (2) 355 (277) 0 (0) 295 (2) 0 0 0 0 00 00 20 00 00 40 40 2xG E395 4 (0) 435 (339) 0 (0) 395 (8) 3 (2) 329 (257) 0 0 0 0 00 00 20 00 00 40 40 2xG E435 0 (3) 4 (359) 4 (0) 435 (339) 3 (2) 355 (277) 0 0 0 0 00 00 20 00 00 40 40 2xG E4 0 (0) 5 (398) 0 (3) 4 (359) 0 (0) 395 (8) 0 0 0 0 00 00 20 00 00 40 40 42 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 0V AC (Frames 8 ) (continued) Cat. No. (see page 9) 0V AC Power Rating at C (4 F) (Power Rating at C [22 F]) Derating for IP NEMA/UL Type (Frames 8 ), IP00 NEMA/UL Type 0 (Frames 8 ), and IP54 NEMA/UL Type 2 (Frames 8 ) Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load Hp Cont. Hp Cont. Hp Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) 2xG E5 5 (0) 545 (425) 0 (0) 5 (398) 4 (0) 425 (332) 0 0 0 0 00 00 20 00 00 40 40 2xG E595 0 (0) 6 (538) 0 (4) 595 (464) 0 (0) 5 (398) See 2xG E295 See 2xG E295 2xG E6 0 (5) 7 (593) 0 (0) 6 (49) 0 (4) 595 (464) See 2xG E395 See 2xG E355 2xG E7 0 (6) 835 (65) 0 (5) 7 (593) 0 (0) 6 (49) See 2xG E395 See 2xG E395 2xG E825 9 (0) 0 (2) 0 (0) 825 (644) 7 (5) 0 (546) See 2xG E435 See 2xG E435 2xG E0 00 (7) 9 (764) 9 (0) 0 (2) 0 (0) 7 (593) See 2xG E4 See 2xG E4 2xG E9 0 (0) 45 (85) 00 (7) 9 (764) 0 (625) 85 (636) See 2xG E5 See 2xG E5 2xG EK (9) 2 (952) 0 (8) (866) 00 (0) 9 (78) See 2xG E395 See 2xG E395 2xG EK4 (0) 5 (93) (00) 4 (5) 2 (0) (928) See 2xG E5 See 2xG E5 Rockwell Automation Publication 7-TD00K-EN-P - October 7 43

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 6V AC (Frames 6 and 7) Cat. No. (see page 9) 6V AC Power Rating Derating for IP00 NEMA/UL Type Open (Frames 6 and 7) Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load kw Cont. kw Cont. kw Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) 2xG F0 22 8.5 23 2xG F034 34 22 2xG F046 37 46 34 2xG F0 45 37 46 2xG F06 55 6 45 0 0 0 0 0 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 44 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 6V AC (Frames 6 and 7) (continued) Cat. No. (see page 9) 6V AC Power Rating Derating for IP00 NEMA/UL Type Open (Frames 6 and 7) Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load kw Cont. kw Cont. kw Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) 2xG F082 75 82 55 6 2xG F098 98 75 82 2xG F9 9 98 2xG F42 32 42 9 2xG F7 7 32 42 0 0 0 0 0 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 Rockwell Automation Publication 7-TD00K-EN-P - October 7 45

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 6V AC (Frames 6 and 7) (continued) Cat. No. (see page 9) 6V AC Power Rating Derating for IP00 NEMA/UL Type Open (Frames 6 and 7) Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load kw Cont. kw Cont. kw Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) 2xG F22 0 22 7 2xG F263 2 263 0 22 0 0 0 0 0 00 00 20 00 00 40 40 0 0 0 00 00 20 00 00 40 40 46 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 6V AC (Frames 8 ) Cat. No. (see page 9) 6V AC Power Rating at C (4 F) (Power Rating at C [22 F]) Derating for IP NEMA/UL Type (Frames 8 ), IP00 NEMA/UL Type 0 (Frames 8 ), and IP54 NEMA/UL Type 2 (Frames 8 ) Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load kw Cont. kw Cont. kw Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) 2xG F265 35 (2) 3 (257) 2 (0) 265 (7) 0 () 25 (68) 0 0 0 0 00 00 20 00 00 40 40 2xG F3 355 (2) 3 (289) 35 (224) 3 (257) 2 (0) 265 (7) 0 0 0 0 00 00 20 00 00 40 40 2xG F3 0 (35) 4 (3) 355 (2) 3 (289) 0 (224) 8 (2) 0 0 0 0 00 00 20 00 00 40 40 2xG F45 4 (355) 4 (359) 0 (35) 45 (324) 355 (2) 3 (289) 0 0 0 0 00 00 20 00 00 40 40 2xG F4 0 (375) 0 (3) 4 (3) 4 (359) 375 (0) 375 (293) 0 0 0 0 00 00 20 00 00 40 40 Rockwell Automation Publication 7-TD00K-EN-P - October 7 47

PowerFlex 7-Series AC Drives Ambient Temperature/Load and Altitude/Load 6V AC (Frames 8 ) (continued) Cat. No. (see page 9) 6V AC Power Rating at C (4 F) (Power Rating at C [22 F]) Derating for IP NEMA/UL Type (Frames 8 ), IP00 NEMA/UL Type 0 (Frames 8 ), and IP54 NEMA/UL Type 2 (Frames 8 ) Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load kw Cont. kw Cont. kw Cont. 2 khz 4 khz 8 khz 2 khz 2 khz 4 khz 8 khz 2 khz 2 khz w/cabinet Option (2G) 4 khz w/cabinet Option (2G) 2xG F0 5 (0) 5 (43) 0 (0) 0 (3) 0 (35) 43 (322) 0 0 0 0 00 00 20 00 00 40 40 2xG F5 6 (0) 6 (7) 5 (4) 5 (4) 4 (355) 4 (359) See 2xG F265 See 2xG F265 2xG F6 7 (5) 7 (554) 6 (0) 6 (7) 0 (375) 0 (3) See 2xG F3 See 2xG F3 2xG F7 0 (5) 7 (66) 7 (5) 7 (554) 5 (4) 5 (4) See 2xG F3 See 2xG F3 2xG F765 8 (6) 8 (67) 7 (0) 765 (597) 6 (0) 6 (7) See 2xG F45 See 2xG F45 2xG F795 0 (7) 9 (749) 0 (6) 795 (6) 7 (0) 7 (585) See 2xG F4 See 2xG F4 2xG F9 00 (0) (796) 0 (7) 9 (749) 0 (0) 795 (6) See 2xG F0 See 2xG F0 2xG FK0 0 (0) (897) 00 (7) (8) 0 (6) 865 (675) See 2xG F3 See 2xG F3 2xG FK4 () 485 (58) (00) (92) (0) (5) See 2xG F0 See 2xG F0 Minimum Dynamic Brake Resistance The tables in this section show the minimum dynamic brake resistance when you use the internal dynamic braking transistor. Brake Resistance for 8/2V Drives Frame 2V 8V ND Hp Catalog Code Min Resistance Max DB Current ND kw Catalog Code Min Resistance Max DB Current 0.5 B2P2 39.5 0.37 B2P2 39.5.0 B4P2 39.5 0.75 B4P2 39.5 2.0 B6P8 26.3 5.5 B6P8 26.3 5 3.0 B9P6 5.8 25 2.2 B9P6 5.8 25 5.0 B05 5.8 25 4 B05 5.8 25 48 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Brake Resistance for 8/2V Drives (continued) Frame 2V 8V ND Hp Catalog Code Min Resistance Max DB Current ND kw Catalog Code Min Resistance Max DB Current 2 0.5 B2P2 5.8 25 0.37 B2P2 5.8 25.0 B4P2 5.8 25 0.75 B4P2 5.8 25 2.0 B6P8 5.8 25.5 B6P8 5.8 25 3.0 B9P6 5.8 25 2.2 B9P6 5.8 25 5.0 B05.29 35 4 B05.29 35 7.5 B022.29 35 5.5 B022.29 35 3 B028 5.8 25 7.5 B028 5.8 25 5 B042 8.3 47.6 B042 8.3 47.6 4 B054 7.9 5 B054 7.9 5 25 B0 3.95 0 8.5 B0 3.95 0 B0 3.95 0 22 B0 3.95 0 6 () B0 ().65 239.4 22 () B0 ().65 239.4 B4.65 239.4 B4.65 239.4 B.65 239.4 37 B.65 239.4 B54.65 239.4 45 B54.65 239.4 75 B92.65 239.4 55 B92.65 239.4 0 B2.65 239.4 66 B2.65 239.4 7 0 () B2 ().2 329 66 () B2 ().2 329 25 B32.2 329 B32.2 329 B3 0.82 478.8 B3 0.82 478.8 0 B477 0.82 478.8 32 B477 0.82 478.8 () IP54, NEMA/UL Type 2 (enclosure code G). Brake Resistance for 0/4V Drives Frame 4V 0V ND Hp Catalog Code Min Resistance Max DB Current ND kw Catalog Code Min Resistance Max DB Current.0 D2P 79.0 0.75 C2P 79.0 2.0 D3P4 79.0.5 C3P5 79.0 3.0 D5P0 79.0 2.2 C5P0 79.0 5.0 D8P0 52.7 5 4 C8P7 52.7 5 7.5 D0 3.6 25 5.5 C0 3.6 25 D04 3.6 25 7.5 C05 3.6 25 Rockwell Automation Publication 7-TD00K-EN-P - October 7 49

PowerFlex 7-Series AC Drives Brake Resistance for 0/4V Drives (continued) Frame 4V 0V ND Hp Catalog Code Min Resistance Max DB Current ND kw Catalog Code Min Resistance Max DB Current 2.0 D2P 3.6 25 0.75 C2P 3.6 25 2.0 D3P4 3.6 25.5 C3P5 3.6 25 3.0 D5P0 3.6 25 2.2 C5P0 3.6 25 5.0 D8P0 3.6 25 4 C8P0 3.6 25 7.5 D0 3.6 25 5.5 C0 3.6 25 D04 3.6 25 7.5 C05 3.6 25 5 D022 22.6 34.9 C022 22.6 34.9 3 D027 3.6 25 5 C0 3.6 25 25 D034 3.6 25 8.5 C037 3.6 25 D0 6.6 47.6 22 C043 6.6 47.6 4 D052 5.8 C0 5.8 D065 5.8 37 C072 5.8 5 () D065 () 7.9 0 37 () C075 () 7.9 0 D077 7.9 0 45 C085 7.9 0 75 D096 7.9 0 55 C4 7.9 0 6 75 () D096 () 3.3 239.4 55 () C4 () 3.3 239.4 0 D25 3.3 239.4 75 C 3.3 239.4 25 D56 3.3 239.4 C 3.3 239.4 D86 3.3 239.4 C5 3.3 239.4 0 D248 3.3 239.4 32 C2 3.3 239.4 7 0 () D248 () 2.4 329 32 () C2 () 2.4 329 2 D2 2.4 329 C2 2.4 329 0 D36 2.4 329 0 C367 2.4 329 3 D45.65 478.8 2 C456.65 478.8 0 D477.65 478.8 2 C477.65 478.8 () IP54, NEMA/UL Type 2 (enclosure code G). Brake Resistance for 0V Drives (Frames 3 5) Frame 0V ND Hp Catalog Code Min Resistance Max DB Current 3.0 EP7 92 2.0 E2P7 92 3.0 E3P9 92 5.0 E6P 32 7.5 E9P0 32 E0 32 5 E07 32 E022 32 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Brake Resistance for 0V Drives (Frames 3 5) Frame 0V ND Hp Catalog Code Min Resistance Max DB Current 4 25 E027 32 E032 32 5 E04 3.5 7 E052 3.5 7 Brake Resistance for 0/6V Drives (Frames 6 and 7) Frame 0V 6V ND Hp Catalog Code Min Resistance Max DB Current ND kw Catalog Code Min Resistance Max DB Current 6 E02 4.4 76.4 7.5 F02 4.4 76.4 5 E08 4.4 76.4 F05 4.4 76.4 E023 4.4 76.4 5 F0 4.4 76.4 E024 4.4 76.4 8.5 F023 4.4 76.4 25 E028 4.4 76.4 22 F0 4.4 76.4 E033 4.4 76.4 F034 4.4 76.4 E042 4.4 76.4 37 F046 4.4 76.4 E053 4.4 76.4 45 F0 4.4 76.4 E063 5.5 0 55 F06 5.5 0 75 E077 5.5 0 75 F082 5.5 0 0 E099 5.5 0 F098 5.5 0 25 E25 5.5 0 F9 5.5 0 E44 5.5 0 32 F42 5.5 0 7 0 E92 3.8 289 F7 3.8 289 2 E242 3.8 289 0 F22 3.8 289 0 E289 3.2 344 2 F263 3.2 344 Rockwell Automation Publication 7-TD00K-EN-P - October 7 5

PowerFlex 7-Series AC Drives Fuse and Circuit Breaker Ratings The tables in this section provide recommended AC line input fuse and circuit breaker information. See Fusing on page 53 and Circuit Breakers on page 53 for UL and IEC requirements. The size recommendations are based on C (4 F) and the U.S. NEC. Other country, state, or local codes can require different ratings. DC link fuse recommendations for DC input drives are also provided. In addition, Frame 8 and larger drives include AC line fuses (with blown fuse indicators) to provide drive short circuit protection. Input Device Requirements Frames Enclosure Catalog Code R IP NEMA/UL Open Type 2 5 N IP NEMA/UL Open Type F N F Enclosure Type Installation Type UL Certification Required Flange IP NEMA/UL Open Type Flange G IP54 NEMA/UL Type 2 6 and 7 N IP00 NEMA/UL Open Type G IP54 NEMA/UL Type 2 8 B, L, P, W IP NEMA/UL Type J, K, Y IP54 NEMA 2 Installed in a ventilated or non-ventilated cabinet. Installed outside of cabinet by using NEMA Type kit or in a ventilated cabinet. Installed in a ventilated or non-ventilated cabinet. Heat sink is inside or outside of cabinet. Installed outside of cabinet by using NEMA Type kit or in a ventilated cabinet. All devices that are listed on pages 54, 56, 58 and 62 are acceptable. When installed in a ventilated cabinet, time delay fuses, circuit breakers, and M combination motor controllers must meet or exceed the listed minimum enclosure volume on pages 58 and 62. Only non-time delay fuses that are listed on pages 54, 56, 58 and 62, excluding maximum value, are acceptable. All devices that are listed on pages 54, 56, 58, 62, and 66 are acceptable. When installed in a ventilated cabinet, time delay fuses, circuit breakers, and M combination motor controllers must meet or exceed the listed minimum enclosure volume on pages 54, 56, 58, 62, and 66. 8V AC/28V DC or 2V AC/324V DC drives. Only non-time delay fuses that are listed on pages 54 and 56, excluding maximum value, are acceptable. 0V AC/5V DC or 4V AC/6V DC drives. Only non-time delay fuses that are listed on pages 58 and 62, excluding maximum value, are acceptable. 0V AC/8V DC drives. Only non-time delay fuses that are listed on page 66 are acceptable, with maximum value of A (Frame 3), A (Frame 4), and 0 A (Frame 5). Installed inside or outside of any cabinet. All devices that are listed on pages 54, 56, 58, 62, and 66 are acceptable. Installed in any cabinet. Heat sink is inside or outside of cabinet. Installed outside of cabinet by using NEMA Type kit. 8V AC/28V DC or 2V AC/324V DC drives. Only non-time delay fuses that are listed on pages 54 and 56, excluding maximum value, are acceptable. 0V AC/5V DC or 4V AC/6V DC drives. All devices that are listed on pages 58 and 62 are acceptable. 0V AC/8V DC drives. Only time delay and non-time delay fuses that are listed on page 66 are acceptable. Installed inside or outside of any cabinet. All devices that are listed on pages 54, 56, 58, 62, and 66 are acceptable. Installed inside of any cabinet. All devices that are listed on pages, 64, and 68 are acceptable. Installed inside or outside of any cabinet. All devices that are listed on pages, 64, and 68 are acceptable. UL Certification Not Required All devices that are listed on pages 54 through are acceptable. 52 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives IMPORTANT For maximum protection of the drive and its internal components, we recommend the use of semiconductor fuses to other methods of circuit protection. Semiconductor fuses reduce the risk of drive damage from power quality events and improves machine and process utilization. Fusing The recommended fuse types are listed here. If available current ratings do not match the ratings that are listed in these tables, choose the next higher fuse rating. IEC BS88 (British Standard) Parts & 2, EN269-, Parts & 2 (), type gg or equivalent must be used. UL UL Class CC, T, RK, J, or L must be used. Circuit Breakers The non-fuse listings in the following tables include inverse time circuit breakers, instantaneous trip circuit breakers (motor circuit protectors), and M self-protected combination motor controllers. If one of these methods are chosen for protection, the following requirements apply: IEC Both types of circuit breakers and M self-protected combination motor controllers are acceptable for IEC installations. UL - Only inverse time circuit breakers and the specified M self-protected combination motor controllers are acceptable for UL installations. () Typical designations include, but is not limited to the following; Parts & 2: AC, AD, BC, BD, CD, DD, ED, EFS, EF, FF, FG, GF, GG, GH. Rockwell Automation Publication 7-TD00K-EN-P - October 7 53

PowerFlex 7-Series AC Drives 8 Volt AC and 28 Volt DC Input Protection Devices Wall Mount Frames 7 Applied Rating () Cont. Outp ut Drive Sized for Normal Duty Drive Sized for Heavy Duty Input Quantities Cat. No. Output Overload Cat. No. Output Overload Continuous AC Input AC Input Protection Devices Input Quantities Dual Element Time Delay Fuse Non-time Delay Fuse Circuit Breaker Max Size (6) Circuit Breaker, Dual Element Time Delay Fuse Motor Circuit Protector (8) M Type E Combination Motor Controller with Adjustable Current Range (9) () Continuous DC Input DC Input Protection (4) Non-time Delay Fuse (x = F or G) min 3 s (x = F or G) min 3 s kva Min (4) Max (5) Min (4) Max (5) Min Enclosure Volume (in. 3 ) (7) Cat. No. Min Enclosure Volume (in. 3 ) (3) Frame (2) 8 Volt AC Input 28 Volt DC Input 0.37 kw 2.5 x B2P2 2.75 3.75 x B4P2 5.28 7.2 0.73 2.0 3 6 3 5 38 3 M-xxx-B25 () 7269 2.4 JKS-6 0.75 kw 4.8 x B4P2 5.28 7.2 x B6P8 8.58.7.4 3.9 6 6 5 38 7 M-xxx-B63 () 7269 4.5 JKS-.5 kw 7.8 x B6P8 8.58.7 x B9P6 2. 6.5 2.5 7.0 5 25 38 5 M-xxx-C () 7269 8.2 HSJ-5 2.2 kw x B9P6 2. 6.5 x B05 6.83 22.95 3.6 9.9 5 5 35 38 5 M-xxx-C6 () 7269.6 HSJ- 4 kw 5.3 x B05 6.83 22.95 x B022 (3) 24.2 33 5.2 4.3 38 M-xxx-C () 7269 6.7 HSJ- 0.37 kw 2 2.5 x B2P2 3.75 4.5 x B2P2 3.75 4.5 0.7 2.0 3 6 3 5 38 3 M-xxx-B25 () 86 2.4 JKS-6 0.75 kw 2 4.8 x B4P2 7.2 8.64 x B4P2 7.2 8.64.4 3.9 6 6 5 38 7 M-xxx-B63 () 86 4.5 JKS-.5 kw 2 7.8 x B6P8.7 4.04 x B6P8.7 4.04 2.5 7.0 5 25 38 5 M-xxx-C () 86 8.2 HSJ-5 2.2 kw 2 x B9P6 6.5 9.8 x B9P6 6.5 9.8 3.6 9.9 5 5 35 38 5 M-xxx-C6 () 86.6 HSJ- 4 kw 2 7.5 x B05 9.25 26.25 x B022 24.2 33 5.9 6.4 35 38 M-xxx-C () 86 9. HSJ- 5.5 kw 2 22 x B022 24.2 33 x B028 (3) 35.42 48.3 7.5.8 45 38 M-xxx-C25 (2) 86 24.3 HSJ-45 7.5 kw 3 32.2 x B028 35.42 48.3 x B042 48.3 64.5..8 0 25 40 M-F8E-C32 86 36.0 HSJ- kw 3 43 x B042 47.3 64.5 x B054 (3) 64.5 4.8 4.2 40 M-F8E-C45 86 48. HSJ- 5 kw 4 x B054 66 x B0 (3) 7.3.7 57.4 25 0 225 40 0 67. HSJ-0 8.5 kw 5 78.2 x B0 86.02 7.3 x B0 7.3.8 27.0 74.9 2 0 0 87.5 HSJ- 22 kw 5 92 x B0.2 38 x B4 (3) 38 3.7 88. 75 0 3 2.9 HSJ-0 kw 6 x B4 32 x B 225 42.4 7.6 2 0 3 37.4 HSJ-225 37 kw 6 x B 65 225 x B54 225 2 52.9 47.0 0 0 0 0 4 2 7.7 HSJ-0 45 kw 6 77 x B54 94.7 265.5 x B92 265.5 33.5 62.5 73.4 225 3 225 0 0 2 2.6 HSJ-3 55 kw 6 22 x B92 243. 33.5 x B2 33.5 3 78.0 26.5 0 0 0 6 0 0 253.0 HSJ-0 66 kw 6 2 x B2 286 3 x B32 (3) 394.9 538.5 9.87 254.7 3 0 3 7 0 0 297.7 HSJ-0 kw 7 359 x B32 394.9 538.5 x B3 538.5 646.2 26.7 35.7 0 0 0 00 00 0 4.0 Bussman 4MM62 kw 7 44 x B3 455.4 62 7.2 46. 5.6 0 0 0 0 474.0 Bussman 4MM63 32 kw 7 477 x B477 524.7 75.5.7 68.4 467.3 0 0 0 0 546. Bussman 4MM63 54 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives () Applied Rating refers to the motor that will be connected to the drive. For example, a C022 drive can be used in Normal Duty mode on an kw motor, or in Heavy-duty mode on a 7.5 kw motor. A C05 drive can be used in Heavy-duty mode on a 5.5 kw motor with the same ratings as a C0. The drive can be programmed for either mode. Wiring and fuses can be sized based on the programmed mode. For any given drive catalog number, Normal Duty mode provides higher continuous current but smaller overload current regarding Heavy-duty mode. See parameter 6 [Duty Rating]. (2) Enclosure codes F, N, and R only. See Frame/Rating Cross-reference in PowerFlex 7-Series AC Drives Technical Data, publication 7-TD00, for frame sizes of other enclosure types. (3) This drive is the next larger frame size. (4) Minimum protection device size is the lowest rated device that supplies maximum protection without nuisance tripping. (5) Maximum protection device size is the highest rated device that supplies drive protection. For US NEC, minimum size is 25% of motor FLA. Ratings that are shown are maximum. (6) Circuit Breaker inverse time breaker. For US NEC, minimum size is 25% of motor FLA. Ratings that are shown are maximum. (7) When using a circuit breaker or time-delay fuse with a drive installed in a ventilated enclosure, the enclosure volume must be greater than or equal to the minimum volume specified in this column. Application-specific thermal considerations can require a larger enclosure. (8) Recommended Motor circuit protector Instantaneous trip circuit breaker. Set the trip setting to the input current of the drive and size for the continuous current of the system. (9) For Bulletin M with adjustable current range, set the current trip to the minimum range that the device will not trip. () Manual Self-Protected (Type E) Combination Motor Controller, UL Listed for 8 Wye or Delta, 2 Wye or Delta, 4Y/277V, and 0Y/347V AC Input. Not UL Listed for use on 4V or 0V Delta/Delta, corner ground, or high-resistance ground systems. () Bulletin M must be Frame C (C2E), Frame D (D8E), or Frame F (F8E). (2) Bulletin M must be Frame D (D8E) or Frame F (F8E). (3) When using a Manual Self-Protected (Type E) Combination Motor Controller, the drive must be installed in a ventilated or non-ventilated enclosure with the minimum volume that is specified in this column. Application-specific thermal considerations may require a larger enclosure. (4) See Fuse Certification and Test Data in PowerFlex AC Drives in Common Bus Configurations Application Guidelines, publication DRIVES-AT002, for fuse self-certification and test data for Bussmann M and JKS fuses recommended for the DC bus fusing. Rockwell Automation Publication 7-TD00K-EN-P - October 7 55

PowerFlex 7-Series AC Drives 2 Volt AC and 324 Volt DC Input Protection Devices Wall Mount Frames 7 Applied Rating () Cont. Output Drive Sized for Normal Duty Drive Sized for Heavy Duty Input Quantities Cat. No. Output Overload Cat. No. Output Overload Continuous AC Input AC Input Protection Devices Input Quantities Dual Element Time Delay Fuse Non-time Delay Fuse Circuit Breaker Max Size (6) Circuit Breaker, Dual Element Time Delay Fuse Motor Circuit Protector (8) M Type E Combination Motor Controller with Adjustable (9) () Current Range (x = F or G) min 3 s (x = F or G) min 3 s kva Min (4) Max (5) Min (4) Max (5) Min Enclosure Volume (in. 3 ) (7) Cat. No. Min Enclosure Volume (in. 3 ) (3) Continuous DC Input DC Input Protection (4) Non-time Delay Fuse Frame (2) 2 Volt AC Input 324 Volt DC Input 0.5 Hp 2.2 x B2P2 2.42 3.3 x B4P2 4.62 6.3 0.7.7 3 6 3 5 38 3 M-xxx-B25 () 7269 2.0 JKS-6 Hp 4.2 x B4P2 4.62 6.3 x B6P8 7.48.2.36 3.3 6 6 5 38 7 M-xxx-B63 () 7269 3.8 JKS- 2 Hp 6.8 x B6P8 7.48.2 x B9P6.56 4.4 2.44 5.9 5 25 38 5 M-xxx-C () 7269 6.9 HSJ-5 3 Hp 9.6 x B9P6.56 4.4 x B05 6.83 22.95 3.45 8.3 5 5 35 38 5 M-xxx-C6 () 7269 9.7 HSJ- 5 Hp 5.3 x BO5 6.83 22.95 x B022 (3) 24.2 33 5. 3.7 38 M-xxx-C () 7269 6.0 HSJ- 0.5 Hp 2 2.2 x B2P2 3.3 3.96 x B2P2 3.3 3.96 0.7.7 3 6 3 5 38 3 M-xxx-B25 () 86 2.0 JKS-6 Hp 2 4.2 x B4P2 6.3 7.56 x B4P2 6.3 7.56.36 3.3 6 6 5 38 7 M-xxx-B63 () 86 3.8 JKS- 2 Hp 2 6.8 x B6P8.2 2.24 x B6P8.2 2.24 2.44 5.9 5 25 38 5 M-xxx-C () 86 6.9 HSJ-5 3 Hp 2 9.6 x B9P6 4.4 7.28 x B9P6 4.4 7.28 3.45 8.3 5 5 35 38 5 M-xxx-C6 () 86 9.7 HSJ- 5 Hp 2 5.3 x BO5 6.83 22.95 x B022 24.2 33 5. 3.7 38 M-xxx-C () 86 6.0 HSJ- 7.5 Hp 2 22 x BO22 24.2 33 x B028 (3) 33 42 8.29 9.9 45 38 M-xxx-C25 (2) 86 23.3 HSJ-45 Hp 3 28 x BO28.8 42 x B042 46.2 63.68 25.7 0 25 40 M-F8E-C32 86.0 HSJ- 5 Hp 3 42 x BO42 46.2 63 x B054 (3) 63 8 6.02 38.5 40 M-F8E-C45 86 45.0 HSJ- Hp 4 54 x BO54 59.4 8 x B0 (3) 8 5.59 49.5 0 75 225 40 0 57.9 HSJ-0 25 Hp 5 x BO 77 5 x BO 5 26 26.69 64.2 225 0 0 75.0 HSJ- Hp 5 x BO 88 x B4 (3) 56. 73.4 0 75 0 0 3 85.8 HSJ-0 Hp 6 4 x B4 4.4 56 x B 56 95.59 97.6 0 3 3 4. HSJ-225 Hp 6 x B 43 95 x B54 95 234.74 22. 75 2 0 4 4 2 42.6 HSJ-0 Hp 6 54 x B54 69.4 23 x B92 23 288. 44.6 225 0 225 0 0 2 69.0 HSJ-3 75 Hp 6 92 x B92 2.2 288 x B2 288 3 74.93.3 2 3 2 0 0 0 2.6 HSJ-0 0 Hp 6 2 x B2 286 3 x B32 (3) 3 468.47 244. 3 0 3 7 0 0 285.3 HSJ-0 25 Hp 7 32 x B32 343.2 468 x B3 468 56.6 2.77 292.9 0 0 0 0 00 0 342.3 Bussman 4MM8 Hp 7 3 x B3 396 5. 338.0 0 0 0 00 0 395.0 Bussman 4MM62 0 Hp 7 477 x B477 524.7 75.5 86.7 447.8 0 0 0 0 523.3 Bussman 4MM63 56 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives () Applied Rating refers to the motor that will be connected to the drive. For example, a C022 drive can be used in Normal Duty mode on an kw motor, or in Heavy-duty mode on a 7.5 kw motor. A C05 drive can be used in Heavy-duty mode on a 5.5 kw motor with the same ratings as a C0. The drive can be programmed for either mode. Wiring and fuses can be sized based on the programmed mode. For any given drive catalog number, Normal Duty mode provides higher continuous current but smaller overload current regarding Heavy-duty mode. See parameter 6 [Duty Rating]. (2) Enclosure codes F, N, and R only. See Frame/Rating Cross-reference in PowerFlex 7-Series AC Drives Technical Data, publication 7-TD00, for frame sizes of other enclosure types. (3) This drive is the next larger frame size. (4) Minimum protection device size is the lowest rated device that supplies maximum protection without nuisance tripping. (5) Maximum protection device size is the highest rated device that supplies drive protection. For US NEC, minimum size is 25% of motor FLA. Ratings that are shown are maximum. (6) Circuit Breaker inverse time breaker. For US NEC, minimum size is 25% of motor FLA. Ratings that are shown are maximum. (7) When using a circuit breaker or time-delay fuse with a drive installed in a ventilated enclosure, the enclosure volume must be greater than or equal to the minimum volume specified in this column. Application-specific thermal considerations can require a larger enclosure. (8) Recommended Motor circuit protector Instantaneous trip circuit breaker. Set the trip setting to the input current of the drive and size for the continuous current of the system. (9) For Bulletin M with adjustable current range, set the current trip to the minimum range that the device will not trip. () Manual Self-Protected (Type E) Combination Motor Controller, UL Listed for 8 Wye or Delta, 2 Wye or Delta, 4Y/277V, and 0Y/347V AC Input. Not UL Listed for use on 4V or 0V Delta/Delta, corner ground, or high-resistance ground systems. () Bulletin M must be Frame C (C2E), Frame D (D8E), or Frame F (F8E). (2) Bulletin M must be Frame D (D8E) or Frame F (F8E). (3) When using a Manual Self-Protected (Type E) Combination Motor Controller, the drive must be installed in a ventilated or non-ventilated enclosure with the minimum volume that is specified in this column. Application-specific thermal considerations may require a larger enclosure. (4) See Fuse Certification and Test Data in PowerFlex AC Drives in Common Bus Configurations Application Guidelines, publication DRIVES-AT002, for fuse self-certification and test data for Bussmann M and JKS fuses recommended for the DC bus fusing. Rockwell Automation Publication 7-TD00K-EN-P - October 7 57

PowerFlex 7-Series AC Drives 0 Volt AC and 5 Volt DC Input Protection Devices Wall Mount Frames 7 Applied Rating () Cont. Output Drive Sized For Normal Duty Drive Sized For Heavy Duty Input Quantities Cat. No. Output Overload Cat. No. Output Overload Continuous AC Input AC Input Protection Devices Input Quantities Dual-element Time-delay Fuse Non Time-delay Fuse Circuit Breaker Max Size (5) Circuit Breaker, Dualelement Time-delay Fuse (x = F or G) Min 3 s (x = F or G) Min 3 s kva Min (3) Max (4) Min (3) Max (4) Min Enclosure Volume (in. 3 ) (6) Motor Circuit Protector (7) M Type E Combination Motor Controller with Adjustable Current Range (8) (9) Cat. No. Min Enclosure Volume (in. 3 ) (3) Continuous DC Input DC Input Protection (4) Non-Time Delay Fuse Frame (2) 0 Volt AC Input 5 Volt DC Input 0.37.3 x C2P 2.3 3.2 0.7. 2 3 2 3 5 38 3 M-xxx-B25 () 7269.2 JKS-6 0.75 kw 2. x C2P 2.3 3.2 x C3P5 3.9 5.3.2.7 2 3 2 3 5 38 3 M-xxx-B25 () 7269 2. JKS-6.5 kw 3.5 x C3P5 3.9 5.3 x C5P0 5.5 7.5.9 2.8 6 6 6 6 5 38 7 M-xxx-B () 7269 3.7 JKS-8 2.2 kw 5 x C5P0 5.5 7.5 x C8P7 9.6 3. 3. 4.5 6 6 6 6 38 7 M-xxx-B63 () 7269 5.3 JKS- 4.0 kw 8.7 x C8P7 9.6 3. x C0 3. 7.3 5.4 7.8 5 5 38 5 M-xxx-C () 7269 9.3 HSJ5 5.5 kw.5 x C0 2.7 7.3 x C05 7.3 23. 7.4.7 5 5 45 38 5 M-xxx-C6 () 7269 2.6 HSJ 7.5 kw 5.4 x C05 6.9 23.. 4.6 25 25 38 M-xxx-C () 7269 7.0 HSJ25 0.75 kw 2 2. x C2P 3. 3.7 x C2P 3. 3.7.2.7 3 6 3 8 5 38 3 M-xxx-B25 () 86 2. JKS-6.5 kw 2 3.5 x C3P5 5.2 6.3 x C3P5 5.2 6.3.9 2.8 6 7 6 2 5 38 7 M-xxx-B () 86 3.7 JKS-8 2.2 kw 2 5 x C5P0 7.5 9.0 x C5P0 7.5 9.0 3. 4.5 6 6 38 7 M-xxx-B63 () 86 5.3 JKS- 4.0 kw 2 8.7 x C8P7 3.0 5.6 x C8P7 3.0 5.6 5.4 7.8 7.5 38 5 M-xxx-C () 86 9.3 HSJ5 x C0 7.2.7 x C0 7.2.7 7.4.7 5 25 5 45 45 38 5 M-xxx-C6 () 86 2.6 HSJ 5.5 kw 2.5 x C05 7.3 23. 7.4.7 5 25 5 45 45 38 5 M-xxx-C6 () 86 2.6 7.5 kw 2 5.4 x C05 6.9 23. x C022 24.2 33.0. 4.6 38 M-xxx-C () 86 7.0 HSJ25 kw 2 22 x C022 24.2 33.0 x C0 (3) 33.0 45.0 4.6 2. 45 38 M-xxx-C25 (2) 86 24.6 HSJ 5 kw 3 x C0 33.0 45.0 x C037 45.0 55.5 9.9 28.7 0 40 M-F8E-C32 86 33.6 HSJ 8.5 kw 3 37 x C037.7 55.5 x C043 55.5 66.6 24.5 35.4 45 45 25 40 M-F8E-C45 86 4.4 HSJ 22 kw 3 43 x C043 47.3 64.5 x C0 (3) 66.0.0 28.5 4.2 55 55 40 48. HSJ kw 4 x C0 66.0.0 x C072.0 8.0 39.8 57.4 75 25 75 225 40 0 67. HSJ0 37 kw 4 72 x C072 79.2 8.0 x C085 (3) 8.0 29.6 48.9.5 275 0 40 0 82.4 HSJ25 45 kw 5 85 x C085 93.5 27.5 x C4 27.5 56.0 57.7 83.3 75 325 2 97.3 HSJ 55 kw 5 4 x C4 4.4 56.0 x C (3) 56.0 2.0 7.3 2.9 225 0 0.2 HSJ75 75 kw 6 x C 54.0 2.0 x C 2.0 255.0 95.0 37.2 75 0 75 5 0 2.3 HSJ2 kw 6 x C 87.0 255.0 x C5 255.0 7.5 5.4 66.5 225 375 225 0 0 2 94.6 HSJ3 kw 6 5 x C5 225.5 7.5 x C2 7.5 3.0 39. 0.8 275 4 275 0 0 0 234.7 HSJ3 32 kw 6 2 x C2 286.0 3.0 x C2 (3) 3.0 468.0 76.5 254.7 325 575 325 7 0 0 297.7 HSJ0 kw 7 2 x C2 332.2 453.0 x C367 453.0 5.5 5.0 295.9 0 675 0 0 0 0 345.7 Bussman M68 58 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives 0 Volt AC and 5 Volt DC Input Protection Devices Wall Mount Frames 7 (continued) Applied Rating () Cont. Output 0 kw 7 367 Drive Sized For Normal Duty Drive Sized For Heavy Duty Input Quantities Cat. No. Output Overload Cat. No. Output Overload Continuous AC Input AC Input Protection Devices Input Quantities Dual-element Time-delay Fuse Non Time-delay Fuse Frame (2) x C367 3.7 5.5 x C456 5.5 684.0 249. 359.5 475 0 475 00 0 0 4.2 Bussman M662 x C477 5.5 684.0 249. 359.5 475 0 475 00 0 0 4.2 Bussman M662 2 kw 7 456 x C456.6 684.0 9.5 446.7 0 00 0 0 0 522.0 Bussman M663 2 kw 7 477 x C477 524 75.5 323.8 467.3 0 00 0 0 546.0 Bussman M663 Circuit Breaker Max Size (5) Circuit Breaker, Dualelement Time-delay Fuse (x = F or G) Min 3 s (x = F or G) Min 3 s kva Min (3) Max (4) Min (3) Max (4) Min Enclosure Volume (in. 3 ) (6) Motor Circuit Protector (7) M Type E Combination Motor Controller with Adjustable Current Range (8) (9) Cat. No. Min Enclosure Volume (in. 3 ) (3) Continuous DC Input DC Input Protection (4) Non-Time Delay Fuse 0 Volt AC Input 5 Volt DC Input () Applied rating refers to the motor that is connected to the drive. For example, a C022 drive can be used in Normal Duty mode on an kw motor, or in Heavy Duty mode on a 7.5 kw motor. A C05 drive can be used in Heavy Duty mode on a 5.5 kw motor with the same ratings as a C0. The drive can be programmed for either mode. Wiring and fuses can be sized based on the programmed mode. For any given drive catalog number, Normal Duty mode provides higher continuous current but smaller overload current when compared to Heavy Duty mode. See parameter 6 [Duty Rating]. (2) Only enclosure codes F, N, and R. See Drive Rating Cross-reference in PowerFlex 7-Series AC Drives Installation Instructions, publication 7-IN00, for frame sizes of other enclosure types. (3) Minimum protection device size is the lowest rated device that supplies maximum protection without nuisance tripping. (4) Maximum protection device size is the highest rated device that supplies drive protection. For US NEC, minimum size is 25% of motor FLA. Ratings that are shown are maximum. (5) Circuit breaker - inverse time breaker. For US NEC, minimum size is 25% of motor FLA. Ratings that are shown are maximum. (6) When using a circuit breaker or time-delay fuse with a drive that is installed in a ventilated enclosure, the enclosure volume must be greater than or equal to the minimum volume specified in this column. Application-specific thermal considerations can require a larger enclosure. (7) Recommended motor circuit protector - instantaneous trip circuit breaker. The trip setting must be set to the input current of the drive and must be sized for the continuous current of the system. (8) Bulletin M with adjustable current range must have the current trip set to the minimum range so that the device does not trip. (9) manual self-protected (Type E) combination motor controller, UL Listed for 4Y/277V and 0Y/347V AC Input. Not UL Listed for use on 4V or 0V Delta/Delta, corner ground, or high-resistance ground systems. () Bulletin M must be Frame C (C2E), Frame D (D8E), or Frame F (F8E). () Bulletin M must be Frame C (C2E), Frame D (D8E), or Frame F (F8E). (2) Bulletin M must be Frame D (D8E) or Frame F (F8E). (3) When using a manual self-protected (Type E) combination motor controller, the drive must be installed in a ventilated or non-ventilated enclosure with the minimum volume that is specified in this column. Application-specific thermal considerations can require a larger enclosure. (4) See Fuse Certification and Test Data in PowerFlex AC Drives in Common Bus Configurations Application Guidelines, publication DRIVES-AT002, for fuse self-certification and test data for Bussmann M and JKS fuses recommended for the DC bus fusing. Rockwell Automation Publication 7-TD00K-EN-P - October 7 59

PowerFlex 7-Series AC Drives 0 Volt AC and 5 Volt DC Input Protection Devices Floor Mount Frames 8 Applied Rating () Cont. Output Duty Cat. No. Output Overload Continuous AC Input AC Input Integral Semiconductor Fuse Size (M) (2) DC Bay to Bay Integral Semiconductor Fuse Size (M) AC Input Protection Devices Recommended for Branch Circuit Protection (Does not apply to 2G Drives with Options) Dual-element Time-delay Fuse Non Time-delay Fuse Circuit Breaker Max Size (6) Motor Circuit Protector (7) Input Quantities Continuous DC Input Min 3 s /Phase 2/Phase Max (5) /Phase 2/Phase Max (5) Min (4) Min (4) Min (4) Min (4) DC Input Integral Semiconductor Fuse Size (M) (8) Frame 0V AC Input 5V DC Input 0 kw 8 385 Heavy G C4 578 693 3 0 0 8 0 0 0 0 443 2 kw 8 4 Normal G C4 6 693 455 0 0 00 0 0 529 456 Heavy G C5 684 82 4 0 0 00 0 0 525 472 Heavy G C567 8 85 466 0 0 00 0 0 543 35 kw 8 5 Light G C4 594 534 0 0 3 0 3 0 62 5 Normal G C5 594 82 533 0 0 3 0 3 0 62 5 Heavy G C6 8 975 533 0 0 0 0 62 35 kw 8 585 Light G C5 644 578 0 7 375 7 375 0 0 0 673 567 Normal G C567 624 85 5 0 7 375 7 375 0 0 0 652 585 Heavy G C7 878 25 577 0 7 375 7 375 0 0 0 673 355 kw 8 62 Light G C567 673 4 0 0 0 0 0 0 0 0 4 6 Normal G C6 75 975 6 0 8 425 8 425 0 0 0 748 642 Heavy G C7 963 55 634 0 0 0 0 0 0 0 0 739 0 kw 8 7 Light G C6 825 739 0 00 0 00 0 20 20 00 863 7 Normal G C7 825 25 739 0 00 0 00 0 20 20 00 863 7 Normal G C7 847 55 758 0 00 0 0 00 0 20 20 00 886 4 kw 8 796 Light G C7 876 784 0 00 0 0 00 0 20 20 00 96 832 Light G C7 95 89 0 0 5 0 0 5 957 0 kw 9 7 Heavy G C9 25 365 739 0 (3) 0 4 0 0 4 20 20 0 863 (3) 0 kw 9 8 Heavy G CK0 3 584 867 0 (3) 0 5 00 0 5 20 20 0 3 (3) 9 Heavy G CK 365 638 896 0 (3) 0 5 00 0 5 20 20 0 47 (3) 9 Normal G C9 0 365 896 0 (3) 0 5 00 0 5 20 20 0 47 (3) 5 kw 9 Light G C9 44 24 0 (3) 6 20 6 30 30 97 (3) Normal G CK0 44 584 24 0 (3) 6 20 6 30 30 97 (3) Heavy G CK2 5 872 24 0 (3) 6 20 6 30 30 97 (3) 6 kw 9 Light G CK0 99 73 0 (3) 3 675 3 675 3 254 (3) Normal G CK 99 638 73 0 (3) 3 675 3 675 3 254 (3) Heavy G CK4 635 298 73 0 (3) 3 675 3 675 3 254 (3) Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives 0 Volt AC and 5 Volt DC Input Protection Devices Floor Mount Frames 8 (continued) Applied Rating () Cont. Output Duty Cat. No. Output Overload Continuous AC Input AC Input Integral Semiconductor Fuse Size (M) (2) DC Bay to Bay Integral Semiconductor Fuse Size (M) AC Input Protection Devices Recommended for Branch Circuit Protection (Does not apply to 2G Drives with Options) Dual-element Time-delay Fuse Non Time-delay Fuse Circuit Breaker Max Size (6) 0V AC Input 5V DC Input 7 kw 9 75 Light G CK 293 57 0 (3) 4 725 20 4 725 4 352 (3) Motor Circuit Protector (7) Input Quantities Continuous DC Input Min 3 s /Phase 2/Phase Max (5) /Phase 2/Phase Max (5) Min (4) Min (4) Min (4) Min (4) DC Input Integral Semiconductor Fuse Size (M) (8) Frame 75 Normal G CK2 293 872 57 0 (3) 4 725 20 4 725 4 352 (3) 75 Heavy G CK5 763 22 57 0 (3) 4 725 20 4 725 4 352 (3) 325 Heavy G CK6 988 2385 5 0 (3) 6 825 20 6 825 30 30 6 525 (3) 0 kw 9 465 Light G CK2 62 443 0 (3) 0 0 0 0 40 40 0 686 (3) 465 Normal G CK4 62 298 443 0 (3) 0 0 0 0 40 40 0 686 (3) 8 kw 9 4 Light G CK4 628 457 0 (3) 0 0 30 0 0 40 40 0 3 (3) 4 Normal G CK5 628 22 457 0 (3) 0 0 30 0 0 40 40 0 3 (3) 0 kw 9 Light G CK5 7 576 0 (3) 9 975 9 975 40 40 9 84 (3) 5 Normal G CK6 749 2385 566 0 (3) 9 975 9 975 40 40 9 8 (3) 00 kw 75 Light G CK6 887 58 689 0 (3) 20 30 20 50 50 20 974 (3) 0 Heavy G C2K 20 32 773 0 (3) 20 0 00 20 0 50 50 20 7 (3) 2 kw 2 Normal G C2K 2365 32 27 0 (3) 26 325 40 26 325 26 2474 (3) kw 23 Light G C2K 2563 2796 2294 0 (3) 28 425 28 425 60 60 28 268 (3) () Applied rating refers to the motor that is connected to the drive. For example, a C4 drive can be used in Normal Duty mode on a 2 kw motor, in Heavy Duty mode on a 0 kw motor or in Light Duty mode on a 35 kw motor. The drive can be programmed for each mode. Wiring and fuses can be sized based on the programmed mode. For any given drive catalog number, Normal Duty mode provides higher continuous current but smaller overload current when compared to Heavy Duty mode. See parameter 6 [Duty Rating]. (2) These AC line fuses (with blown fuse indicators) are included in the drive to provide drive short circuit protection. AC input protection devices for branch circuit protection based on US NEC are listed in the table. Each drive bay has one fuse per phase. (3) Each drive bay has one fuse per DC line. (4) Minimum protection device size is the lowest rated device that supplies maximum protection without nuisance tripping. (5) Maximum protection device size is the highest rated device that supplies drive protection. For US NEC, minimum size is 25% of motor FLA. Ratings that are shown are maximum. (6) Circuit breaker - inverse time breaker. For US NEC, minimum size is 25% of motor FLA. Ratings that are shown are maximum. (7) Recommended motor circuit protector - instantaneous trip circuit breaker. The trip setting must be set to the input current of the drive and must be sized for the continuous current of the system. (8) These DC line fuses (with blown fuse indicators) are included in the drive to provide drive short circuit protection. 6 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives 4 Volt AC and 6 Volt DC Input Protection Devices Wall Mount Frames 7 Applied Rating () Cont. Output Drive Sized For Normal Duty Drive Sized For Heavy Duty Input Quantities Cat. No. Output Overload Cat. No. Output Overload Continuous AC Input AC Input Protection Devices Input Quantities Dual-element Time-delay Fuse Non-Time Delay Fuse Circuit Breaker Max Size (5) Circuit Breaker, Dual-element Time-delay Fuse Motor Circuit Protector (7) M Type E Combination Motor Controller with Adjustable Current Range (x = F or G) Min 3 s (x = F or G) Min 3 s kva Min (3) Max (4) Min (3) Max (4) Min Enclosure Cat. No. Min Enclosure Volume (in. 3 ) (6) Volume (in. 3 ) (3) (8) (9) Continuous DC Input DC Input Protection (4) Non-Time Delay Fuse Frame (2) 4 Volt AC Input 6 Volt DC Input 0.5 Hp. x D2P 2.3 3.2 0.7 0.9 2 3 2 3 5 38 3 M-xxx-B25 () 7269.0 JKS-6.0 Hp 2. x D2P 2.3 3.2 x D3P4 3.7 5..3.6 2 3 2 3 5 38 3 M-xxx-B25 () 7269.9 JKS-6 2.0 Hp 3.4 x D3P4 3.7 5. x D5P0 5.5 7.5 2.2 2.6 6 6 6 6 5 38 7 M-xxx-B () 7269 3.0 JKS-6 3.0 Hp 5 x D5P0 5.5 7.5 x D8P0 8.8 2.0 3.2 3.9 6 6 6 6 38 7 M-xxx-B63 () 7269 4.5 JKS- 5.0 Hp 8 x D8P0 8.8 2.0 x D0 2. 6.5 5.7 6.9 5 5 38 5 M-xxx-C () 7269 8. HSJ5 7.5 Hp x D0 2. 6.5 x D04 6.5 2.0 7.9 9.5 5 5 38 5 M-xxx-C6 () 7269. HSJ Hp 4 x D04 5.4 2.0.4 2.5 25 25 38 M-xxx-C6 () 7269 4.7 HSJ.0 Hp 2 2. x D2P 3. 3.7 x D2P 3. 3.7.3.6 2 6 2 8 5 38 3 M-xxx-B25 () 86.9 JKS-6 2.0 Hp 2 3.4 x D3P4 5. 6. x D3P4 5. 6. 2.2 2.6 4 7 4 2 5 38 7 M-xxx-B () 86 3.0 JKS-6 3.0 Hp 2 5 x D5P0 7.5 9.0 x D5P0 7.5 9.0 3.2 3.9 6 6 38 7 M-xxx-B63 () 86 4.5 JKS- 5.0 Hp 2 8 x D8P0 2.0 4.4 x D8P0 2.0 4.4 5.7 6.9 7.5 38 5 M-xxx-C () 86 8. HSJ5 x D0 6.5 9.8 x D0 6.5 9.8 7.9 9.5 2 2 38 5 M-xxx-C6 () 86. HSJ 7.5 Hp 2 x D04 6.5 2.0 7.9 9.5 2 2 38 5 M-xxx-C6 () 86. HSJ Hp 2 4 x D04 5.4 2.0 x D022 2.0 33.0.4 2.5 55 38 M-xxx-C6 () 86 4.7 HSJ 5 Hp 2 22 x D022 24.2 33.0 x D027 (3) 33.0.5 6.6 9.9 38 M-xxx-C25 (2) 86 23.3 HSJ Hp 3 27 x D027 29.7.5 x D034.5 5.0.6 24.8 35 35 0 0 40 M-F8E-C32 86 28.9 HSJ 25 Hp 3 34 x D034 37.4 5.0 x D0 5.0 6.2 25.9 3.2 45 75 45 25 0 40 M-F8E-C45 86 36.4 HSJ Hp 3 x D0 44.0.0 x D052 (3).0 78.0.5 36.7 40 M-F8E-C45 86 42.9 HSJ Hp 4 52 x D052 57.2 78.0 x D065 78.0 97.5 39.7 47.7 65 65 0 40 55.7 HSJ Hp 4 65 x D065 7.5 97.5 x D077 (3) 97.5 7.0 49.6 59.6 25 2 75 40 0 69.7 HSJ0 Hp 5 77 x D077 84.7 5.5 x D096 5.5 44.0. 72.3 0 0 0 225 0 84.5 HSJ 75 Hp 5 96 x D096 5.6 44.0 x D25 (3) 44.0 87.5 74.9. 25 0 25 375 275 25 5.3 HSJ75 0 Hp 6 25 x D25 37.5 87.5 x D56 87.5 234.0 97.6 7.4 75 275 75 0 375 2 37. HSJ0 25 Hp 6 56 x D56 7.6 234.0 x D86 234.0 2.8 2.8 46.5 0 3 0 0 4 2 7.2 HSJ0 Hp 6 86 x D86 4.6 279.0 x D248 279.0 372.0 45.2 74.6 2 0 2 0 5 2 4. HSJ0 0 Hp 6 248 x D248 272.8 372.0 x D2 (3) 372.0 453.0 93.6 232.8 325 5 325 0 0 0 272. HSJ0 2 Hp 7 2 x D2 332.2 453.0 x D36 453.0 543.6 235.7 283.5 0 675 0 0 0 0 33.3 Bussman M68 Rockwell Automation Publication 7-TD00K-EN-P - October 7 62

PowerFlex 7-Series AC Drives 4 Volt AC and 6 Volt DC Input Protection Devices Wall Mount Frames 7 (continued) Applied Rating () Cont. Output 0 Hp 7 36 Drive Sized For Normal Duty Drive Sized For Heavy Duty Input Quantities Cat. No. Output Overload Cat. No. Output Overload Continuous AC Input AC Input Protection Devices Input Quantities Dual-element Time-delay Fuse Non-Time Delay Fuse Frame (2) x D36 397. 54.5 x D45 54.5 649.8 28.8 338.9 475 0 475 00 00 0 396. Bussman M662 x D477 54.5 649.8 28.8 338.9 475 0 475 00 00 0 396. Bussman M662 3 Hp 7 45 x D45 456.5 622.5 323.9 389.6 525 0 525 0 455.3 Bussman M662 0 Hp 7 477 x D477 524.7 75.5 372.3 447.8 0 00 0 0 523.3 Bussman M663 Circuit Breaker Max Size (5) Circuit Breaker, Dual-element Time-delay Fuse Motor Circuit Protector (7) M Type E Combination Motor Controller with Adjustable Current Range (x = F or G) Min 3 s (x = F or G) Min 3 s kva Min (3) Max (4) Min (3) Max (4) Min Enclosure Cat. No. Min Enclosure Volume (in. 3 ) (6) Volume (in. 3 ) (3) (8) (9) Continuous DC Input DC Input Protection (4) Non-Time Delay Fuse 4 Volt AC Input 6 Volt DC Input () Applied rating refers to the motor that is connected to the drive. For example, a D022 drive can be used in Normal Duty mode on a 5 Hp motor, or in Heavy Duty mode on a Hp motor. A D04 drive can be used in Heavy Duty mode on a 7.5 Hp motor with the same ratings as a D0. The drive can be programmed for either mode. Wiring and fuses can be sized based on the programmed mode. For any given drive catalog number, Normal Duty mode provides higher continuous current but smaller overload current when compared to Heavy Duty mode. See parameter 6 [Duty Rating]. (2) Only enclosure codes F, N, and R. See Drive Rating Cross-reference in PowerFlex 7-Series AC Drives Installation Instructions, publication 7-IN00, for frame sizes of other enclosure types. (3) Minimum protection device size is the lowest rated device that supplies maximum protection without nuisance tripping. (4) Maximum protection device size is the highest rated device that supplies drive protection. For US NEC, minimum size is 25% of motor FLA. Ratings that are shown are maximum. (5) Circuit breaker - inverse time breaker. For US NEC, minimum size is 25% of motor FLA. Ratings that are shown are maximum. (6) When using a circuit breaker or time-delay fuse with a drive that is installed in a ventilated enclosure, the enclosure volume must be greater than or equal to the minimum volume specified in this column. Application specific thermal considerations can require a larger enclosure. (7) Recommended motor circuit protector - instantaneous trip circuit breaker. The trip setting must be set to the input current of the drive and must be sized for the continuous current of the system. (8) Bulletin M with adjustable current range must have the current trip set to the minimum range so that the device does not trip. (9) manual self-protected (Type E) combination motor controller, UL Listed for 4Y/277V and 0Y/347V AC Input. Not UL Listed for use on 4V or 0V Delta/Delta, corner ground, or high-resistance ground systems. () Bulletin M must be Frame C (C2E), Frame D (D8E), or Frame F (F8E). () Bulletin M must be Frame C (C2E), Frame D (D8E), or Frame F (F8E). (2) Bulletin M must be Frame D (D8E) or Frame F (F8E). (3) When using a manual self-protected (Type E) combination motor controller, the drive must be installed in a ventilated or non-ventilated enclosure with the minimum volume that is specified in this column. Application specific thermal considerations can require a larger enclosure. (4) See Fuse Certification and Test Data in PowerFlex AC Drives in Common Bus Configurations Application Guidelines, publication DRIVES-AT002, for fuse self-certification and test data for Bussmann M and JKS fuses recommended for the DC bus fusing. 63 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives 4 Volt AC and 6 Volt DC Input Protection Devices Floor Mount Frames 8 Applied Rating () Cont. Output Duty Cat. No. Output Overload Continuous AC Input AC Input Integral Semiconductor Fuse Size (M) (2) DC Bay to Bay Integral Semiconductor Fuse Size (M) AC Input Protection Devices Recommended for Branch Circuit Protection (Does not apply to 2G Drives with Options) Dual-element Time-delay Fuse Non Time-delay Fuse Circuit Breaker Max Size (6) Input Quantities Motor Circuit Continuous DC Protector (7) Input Min 3 s /Phase 2/Phase Max (5) /Phase 2/Phase Max (5) Min (4) Min (4) Min (4) Min (4) DC Input Integral Semiconductor Fuse Size (M) (8) Frame 4V AC Input 6V DC Input 0 Hp 8 3 Heavy G D4 555 666 349 0 4 0 4 0 0 4 7 3 Hp 8 4 Normal G D4 473 666 6 0 5 0 5 5 473 44 Heavy G D485 62 745 39 0 0 0 0 0 455 454 Heavy G D545 68 88 428 0 5 00 5 5 499 0 Hp 8 485 Light G D4 534 458 0 0 00 0 0 533 485 Normal G D485 534 745 458 0 0 00 0 0 533 485 Heavy G D67 728 926 458 0 0 00 0 0 533 4 Hp 8 545 Light G D485 0 54 0 6 6 6 599 545 Normal G D545 0 88 54 0 6 6 6 599 545 Heavy G D7 88 65 54 0 6 325 6 325 6 599 0 Hp 8 5 Light G D545 649 557 0 0 0 0 0 0 649 67 Normal G D67 679 926 582 0 7 325 7 325 0 0 0 678 67 Heavy G D7 926 582 0 7 375 7 375 0 0 678 0 Hp 8 7 Light G D67 78 6 0 8 425 8 425 20 20 0 78 7 Normal G D7 78 65 6 0 8 425 8 425 20 20 0 78 6 Hp 8 765 Light G D7 842 722 0 00 0 0 00 0 20 20 00 84 7 Normal G D7 84 698 0 0 4 0 4 20 20 0 84 0 Hp 8 0 Light G D7 8 755 0 00 0 0 00 0 0 00 8 0 Hp 9 7 Heavy G D0 65 278 6 0 (3) 8 425 8 425 00 00 8 78 (3) 0 Hp 9 795 Heavy G D9 93 4 7 0 (3) 9 475 0 9 475 20 20 9 874 (3) 0 Normal G D0 8 278 755 0 (3) 9 475 0 9 475 20 20 9 8 (3) 7 Hp 9 0 Heavy G DK0 568 755 0 (3) 9 475 0 9 475 20 20 9 8 (3) 0 Hp 9 9 Light G D0 56 6 0 (3) 575 00 575 20 20 55 (3) 9 Normal G D9 56 4 6 0 (3) 575 00 575 20 20 55 (3) 9 Heavy G DK2 4 728 6 0 (3) 575 00 575 20 20 55 (3) 0 Hp 9 45 Light G D9 986 0 (3) 2 625 20 2 625 00 00 2 49 (3) 45 Normal G DK0 568 986 0 (3) 2 625 20 2 625 00 00 2 49 (3) 45 Heavy G DK3 568 48 986 0 (3) 2 625 20 2 625 00 00 2 49 (3) 00 Hp 9 35 Light G DK0 249 7 0 (3) 3 675 3 675 3 248 (3) 35 Normal G DK2 249 728 7 0 (3) 3 675 3 675 3 248 (3) 35 Heavy G DK4 3 2 7 0 (3) 3 675 3 675 3 248 (3) 64 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives 4 Volt AC and 6 Volt DC Input Protection Devices Floor Mount Frames 8 (continued) Applied Rating () Cont. Output Duty Cat. No. Output Overload Continuous AC Input AC Input Integral Semiconductor Fuse Size (M) (2) DC Bay to Bay Integral Semiconductor Fuse Size (M) AC Input Protection Devices Recommended for Branch Circuit Protection (Does not apply to 2G Drives with Options) Dual-element Time-delay Fuse Non Time-delay Fuse Circuit Breaker Max Size (6) 4V AC Input 6V DC Input 0 Hp 9 365 Light G DK2 2 288 0 (3) 0 20 0 30 30 (3) Input Quantities Motor Circuit Continuous DC Protector (7) Input Min 3 s /Phase 2/Phase Max (5) /Phase 2/Phase Max (5) Min (4) Min (4) Min (4) Min (4) DC Input Integral Semiconductor Fuse Size (M) (8) Frame 365 Normal G DK3 2 48 288 0 (3) 0 20 0 30 30 (3) 2 Heavy G DK5 5 2288 99 0 (3) 7 20 7 396 (3) 2 Hp 9 4 Light G DK3 562 3 0 (3) 0 8 00 0 8 00 00 0 56 (3) 4 Normal G DK4 562 2 3 0 (3) 0 8 00 0 8 00 00 0 56 (3) 3 Hp 9 5 Light G DK4 694 453 0 (3) 0 0 30 0 0 40 40 0 693 (3) 525 Normal G DK5 678 2288 439 0 (3) 0 0 0 0 40 40 0 677 (3) Hp 655 Light G DK5 82 986 562 0 (3) 9 975 9 975 40 40 9 89 (3) 6 Hp 7 Heavy G D2K0 2595 34 633 0 (3) 25 30 25 40 40 2 (3) 7 Hp Normal G D2K0 2277 34 953 0 (3) 24 225 40 24 225 50 50 24 2276 (3) 00 Hp 22 Light G D2K0 2464 2688 24 0 (3) 26 325 40 26 325 60 60 26 2463 (3) () Applied rating refers to the motor that is connected to the drive. For example, a D4 drive can be used in Normal Duty mode on a 3 Hp motor, in Heavy Duty mode on a 0 Hp motor or in Light Duty mode on a 0 Hp motor. The drive can be programmed for each mode. Wiring and fuses can be sized based on the programmed mode. For any given drive catalog number, Normal Duty mode provides higher continuous current but smaller overload current when compared to Heavy Duty mode. See parameter 6 [Duty Rating]. (2) These AC line fuses (with blown fuse indicators) are included in the drive to provide drive short circuit protection. AC input protection devices for branch circuit protection based on US NEC are listed in the table. Each drive bay has one fuse per phase. (3) Each drive bay has one fuse per DC line. (4) Minimum protection device size is the lowest rated device that supplies maximum protection without nuisance tripping. (5) Maximum protection device size is the highest rated device that supplies drive protection. For US NEC, minimum size is 25% of motor FLA. Ratings that are shown are maximum. (6) Circuit breaker - inverse time breaker. For US NEC, minimum size is 25% of motor FLA. Ratings that are shown are maximum. (7) Recommended motor circuit protector - instantaneous trip circuit breaker. The trip setting must be set to the input current of the drive and must be sized for the continuous current of the system. (8) These DC line fuses (with blown fuse indicators) are included in the drive to provide drive short circuit protection. Rockwell Automation Publication 7-TD00K-EN-P - October 7 65

PowerFlex 7-Series AC Drives 0 Volt AC and 8V DC Input Protection Devices Wall Mount Frames 3 7 Applied Rating () Cont. Output Drive Sized For Normal Duty Drive Sized For Heavy Duty Continuous AC Input Cat. No. Output Overload Cat. No. Output Overload AC Input Protection Devices Input Quantities Dual-element Time-delay Fuse Non Time-delay Fuse Circuit Breaker Max Size (6) Circuit Breaker, Dual-element Time-delay Fuse Motor Circuit Protector (8) M Type E Combination Motor Controller with Adjustable Current Range (x = F or G) Min 3 s (x = F or G) Min 3 s Min (2) Max (3) Min (2) Max (3) Min Enclosure Cat. No. Min Enclosure Volume (in. 3 ) (7) Volume (in. 3 ) (3) (9) () Continuous DC Input DC Input Protection (4) Non-Time Delay Fuse Frame 0 Volt AC Input 8 Volt DC Input 0.5 Hp 3 0.9 x EP7.4 2.6 0.8 2 3 3 40 M-xxx-B6 () 86.0 JKS-2 Hp 3.7 x EP7.9 2.6 x E2P7 2.6 4..6 2 4 2 5 5 40 2 M-xxx-B25 () 86.9 JKS-4 2 Hp 3 2.7 x E2P7 3.0 4. x E3P9 4. 5.9 2.5 3 6 3 8 8 40 3 M-xxx-B () 86 3.0 JKS-5 3 Hp 3 3.9 x E3P9 4.3 5.9 x E6P 5.9 9.2 3.7 5 8 5 (4), (4), (5) 40 5 M-D8E-B63 86 4.3 JKS-8 (5) 5 Hp 3 6. x E6P 6.7 9.2 x E9PO 9.2 3.5 5.7 7 3 7 5 40 M-D8E-B63 86 6.7 HSJ 7.5 Hp 3 9 x E9PO 9.9 3.5 x E0 3.5 6.5 8.4 9 25 40 5 M-xxx-C (2) 86 9.9 HSJ5 Hp 3 x E0 2. 6.5 x E07 6.5 25.5.3 3 23 3 40 5 M-xxx-C6 (2) 86 2.0 HSJ 5 Hp 3 7 x E07 8.7 25.5 x E022 25.5 33.0 6.0 36 40 M-F8E-C 86 8.6 HSJ Hp 3 22 x E022 24.2 33.0.7 26 46 26 40 M-F8E-C25 86 24. HSJ 4 22 x E027 33.0.5.7 26 46 26 40 M-F8E-C25 86 24. HSJ 25 Hp 4 27 x E027 29.7.5 x E032.5 48.6 25.3 32 57 32 75 40 35 M-F8E-C32 86 29.6 HSJ Hp 4 32 x E032 35.2 48.0.0 38 68 38 0 40 M-F8E-C32 86 35.0 HSJ 5 32 x E04 48.0 6.5.0 38 68 38 0 M-F8E-C32 36 35.0 HSJ Hp 5 4 x E04 45. 6.5 x E052 6.5 78.0 38.5 48 87 48 5 44.9 HSJ Hp 5 52 x E052 57.2 78.0 48.8 6 6 45 65 56.9 HSJ 7.5 Hp 6 9. x E02 3.7 8.0 8.5 9 25 5 M-xxx-C (2) 40.0 HSJ5 Hp 6 2 x E02 3.2 8.0 x E08 8.0 27.0.3 4 25 4 35 5 M-xxx-C6 (2) 40 3. HSJ 5 Hp 6 8 x E08 9.8 27.0 x E023 27.0 34.5 6.9 2 38 2 25 M-F8E-C 40 9.7 HSJ Hp 6 23 x E023 25.3 34.5 x E028 34.5 42.0 2.6 27 (4), 49 (4), 27 (4), 65 M-F8E-C25 40 25.2 HSJ 25 (5) (5) 25 (5) 6 24 x E024 26.4 36.0 22.5 28 5 28 M-F8E-C25 40 26.3 HSJ 6 22 x E024 33.0 39.6.7 26 46 26 M-F8E-C25 40 24. HSJ 25 Hp 6 28 x E028.8 42.0 x E033 42.0.4 26.3 35 35 35 M-F8E-C32 40.7 HSJ Hp 6 33 x E033 36.3 49.5 x E042 49.5 63.0 3.0 95 0 M-F8E-C32 40 36. HSJ Hp 6 42 x E042 46.2 63.0 x E053 63.0 79.5 39.4 46.0 HSJ Hp 6 53 (4), x E053 58.3 79.5 x E063 78.0 94.5 49.8 (4), (4), 65 58.0 (4), HSJ 52 (5) 48.8 (5) 45 (5) 56.9 (5) Hp 6 63 x E063 69.3 94.5 x E077 94.5 5.5 59. 75 35 75 75 75 69.0 HSJ 75 Hp 6 77 x E077 84.7 5.5 x E099 5.5 48.5 72.3 65 25 2 95 84.3 HSJ 0 Hp 6 99 x E099 8.9 48.5 x E25 48.5 87.5 92.9 5 2 5 2 2 8.4 HSJ75 66 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives 0 Volt AC and 8V DC Input Protection Devices Wall Mount Frames 3 7 (continued) Applied Rating () Cont. Output Drive Sized For Normal Duty Drive Sized For Heavy Duty Continuous AC Input Cat. No. Output Overload Cat. No. Output Overload AC Input Protection Devices Input Quantities Dual-element Time-delay Fuse Non Time-delay Fuse Frame 25 Hp 6 25 x E25 37.5 87.5 x E44 87.5 225.0 7.4 45 265 45 3 3 36.8 HSJ225 Hp 6 44 x E44 58.4 26.0 35.2 0 0 0 57.6 HSJ2 7 44 x E92 26.0 288.0 35.2 5 5 4 57.6 HSJ2 0 Hp 7 92 x E92 2.2 288.0 x E242 288.0 363.0.3 225 5 225 5 5 2 2.2 HSJ3 2 Hp 7 242 x E242 266.2 363.0 x E289 363.0 435.6 227.2 285 5 285 6 6 285 264.9 HSJ0 0 Hp 7 289 x E289 37.9 433.5 27.3 3 0 3 0 0 3 36.4 HSJ0 Circuit Breaker Max Size (6) Circuit Breaker, Dual-element Time-delay Fuse Motor Circuit Protector (8) M Type E Combination Motor Controller with Adjustable Current Range (x = F or G) Min 3 s (x = F or G) Min 3 s Min (2) Max (3) Min (2) Max (3) Min Enclosure Cat. No. Min Enclosure Volume (in. 3 ) (7) Volume (in. 3 ) (3) (9) () Continuous DC Input DC Input Protection (4) Non-Time Delay Fuse 0 Volt AC Input 8 Volt DC Input () Applied rating refers to the motor that is connected to the drive. For example, a E063 drive can be used in Normal Duty mode on a Hp motor, in Heavy Duty mode on a Hp motor. The drive can be programmed for each mode. Wiring and fuses can be sized based on the programmed mode. For any given drive catalog number, Normal Duty mode provides higher continuous current but smaller overload current when compared to Heavy Duty mode. See parameter 6 [Duty Rating]. (2) Minimum protection device size is the lowest rated device that supplies maximum protection without nuisance tripping. (3) Maximum protection device size is the highest rated device that supplies drive protection. For US NEC, minimum size is 25% of motor FLA. Ratings that are shown are maximum. (4) Normal duty. (5) Heavy duty. (6) Circuit breaker - inverse time breaker. For US NEC, minimum size is 25% of motor FLA. Ratings that are shown are maximum. (7) When using a circuit breaker or time-delay fuse with a drive that is installed in a ventilated enclosure, the enclosure volume must be greater than or equal to the minimum volume specified in this column. Application specific thermal considerations can require a larger enclosure. (8) Recommended motor circuit protector - instantaneous trip circuit breaker. The trip setting must be set to the input current of the drive and must be sized for the continuous current of the system. (9) Bulletin M with adjustable current range must have the current trip set to the minimum range so that the device does not trip. () manual self-protected (Type E) combination motor controller, UL Listed for 4Y/277V and 0Y/347V AC Input. Not UL Listed for use on 4V or 0V Delta/Delta, corner ground, or high-resistance ground systems. () Bulletin M must be Frame C (C2E), Frame D (D8E), or Frame F (F8E). (2) Bulletin M must be Frame D (D8E) or Frame F (F8E). (3) When using a manual self-protected (Type E) combination motor controller, the drive must be installed in a ventilated or non-ventilated enclosure with the minimum volume that is specified in this column. Application specific thermal considerations can require a larger enclosure. (4) See Fuse Certification and Test Data in PowerFlex AC Drives in Common Bus Configurations Application Guidelines, publication DRIVES-AT002, for fuse self-certification and test data for Bussmann M and JKS fuses recommended for the DC bus fusing. Rockwell Automation Publication 7-TD00K-EN-P - October 7 67

PowerFlex 7-Series AC Drives 0 Volt AC and 8V DC Input Protection Devices Floor Mount Frames 8 Applied Rating () Cont. Output Duty Cat. No. Output Overload Continuo us AC Input AC Input Integral Semiconductor Fuse Size (M) (2) DC Bay to Bay Integral Semiconduct or Fuse Size (M6648) Min 3 s / Phase Min (3) AC Input Protection Devices Recommended for Branch Circuit Protection (Does not apply to 2G Drives with Options) Dual-element Time-delay Fuse 2/ Phase Min (3) Max (4) / Phase Min (3) Non Time-delay Fuse Circuit Breaker Max Size (5) 2/ Phase Min (3) Motor Circuit Protector (6) Input Quantities Continuous DC Input Max (4) DC Input Integral Semiconductor Fuse Size (M6253) (7) Frame 0V AC Input 8V DC Input 2 Hp 8 272 Heavy G E295 8 4 257 0 3 75 0 3 75 0 0 3 0 00 0 Hp 8 295 Heavy G E355 443 533 278 0 3 75 0 3 75 0 0 3 325 00 295 Normal G E295 325 4 278 0 0 0 0 0 0 00 00 0 325 00 3 Hp 8 355 Light G E295 39 335 0 4 225 0 4 225 0 0 4 39 00 355 Normal G E355 39 533 335 0 4 225 0 4 225 0 0 4 39 00 329 Heavy G E395 494 593 3 0 0 0 0 0 0 00 00 0 363 00 355 Heavy G E435 533 639 335 0 4 225 0 4 225 0 0 4 39 00 0 Hp 8 395 Light G E355 435 373 0 0 2 0 0 2 0 436 00 395 Normal G E395 435 593 373 0 0 2 0 0 2 0 436 00 395 Heavy G E4 593 7 373 0 0 2 0 0 2 0 436 00 4 Hp 8 435 Light G E395 479 4 0 5 275 00 5 275 5 4 00 435 Normal G E435 479 639 4 0 0 2 0 0 2 0 4 00 425 Heavy G E5 638 765 0 5 275 00 5 275 5 469 00 0 Hp 8 4 Light G E435 6 434 0 5 275 00 5 275 5 7 00 5 Light G E4 56 48 0 6 325 0 6 325 6 562 00 4 Normal G E4 6 7 434 0 5 275 00 5 275 5 7 00 5 Normal G E5 56 765 48 0 6 325 0 6 325 6 562 00 5 Hp 8 545 Light G E5 0 54 0 6 325 6 325 6 00 0 Hp 9 5 Heavy G E595 765 98 48 0 00 0 0 0 0 0 0 562 00 0 Hp 9 595 Heavy G E6 893 7 562 0 00 0 3 0 3 0 0 0 656 00 595 Normal G E595 655 98 562 0 00 0 3 0 3 0 0 0 656 00 0 Hp 9 6 Heavy G E7 945 49 595 0 00 7 375 7 375 0 0 7 695 00 6 Normal G E6 693 7 595 0 00 7 375 7 375 0 0 7 695 00 595 Light G E595 693 65 0 00 0 0 0 0 00 00 0 76 00 7 Hp 9 0 Heavy G E825 2 66 0 00 8 425 8 425 00 00 8 772 00 68 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives 0 Volt AC and 8V DC Input Protection Devices Floor Mount Frames 8 (continued) Applied Rating () Cont. Output Duty Cat. No. Output Overload Continuo us AC Input AC Input Integral Semiconductor Fuse Size (M) (2) DC Bay to Bay Integral Semiconduct or Fuse Size (M6648) AC Input Protection Devices Recommended for Branch Circuit Protection (Does not apply to 2G Drives with Options) Dual-element Time-delay Fuse Min 3 s / Min (3) Phase 2/ Phase Frame Min (3) Max (4) Non Time-delay Fuse Circuit Breaker Max / 2/ Phase Min (3) Max Phase Min (3) (4) Size (5) Motor Circuit Protector (6) Input Quantities Continuous DC Input DC Input Integral Semiconductor Fuse Size (M6253) (7) 0V AC Input 8V DC Input 0 Hp 9 7 Heavy G E0 368 77 0 00 0 4 0 4 20 20 0 838 00 7 Normal G E7 836 77 0 00 0 4 0 4 20 20 0 838 00 7 Light G E6 836 77 0 00 0 4 0 4 20 20 0 838 00 0 Hp 9 85 Heavy G E9 223 4 769 0 00 9 475 0 9 475 20 20 9 899 00 825 Normal G E825 8 2 779 0 00 9 475 0 9 475 20 20 9 9 00 835 Light G E7 99 788 0 00 00 0 0 00 0 00 92 00 9 Hp 9 0 Normal G E0 9 368 849 0 00 525 0 525 20 20 993 00 0 Light G E825 9 849 0 00 525 0 525 20 20 993 00 00 Hp 9 9 Normal G E9 78 4 925 0 00 575 20 575 20 20 8 00 9 Light G E0 78 925 0 00 575 20 575 20 20 8 00 9 Heavy G EK 3 665 868 0 00 0 5 00 0 5 20 20 0 5 00 0 Hp 9 45 Light G E9 986 0 00 2 625 20 2 625 00 00 2 52 00 Normal G EK 22 665 48 0 00 6 6 30 30 30 224 00 Hp 2 Light G EK 342 464 5 0 00 4 725 20 4 725 345 00 2 Hp Heavy G EK4 785 245 23 0 00 0 20 0 32 00 Hp 4 Normal G EK4 573 245 3 0 00 0 8 00 0 8 40 40 40 577 00 Hp 5 Light G EK4 683 836 444 0 00 0 0 0 0 40 40 40 687 00 () Applied rating refers to the motor that is connected to the drive. For example, a E4 drive can be used in Normal Duty mode on a 4 Hp motor, in Heavy Duty mode on a 3 Hp motor or in Light Duty mode on a 0 Hp motor. The drive can be programmed for each mode. Wiring and fuses can be sized based on the programmed mode. For any given drive catalog number, Normal Duty mode provides higher continuous current but smaller overload current when compared to Heavy Duty mode. See parameter 6 [Duty Rating]. (2) These AC line fuses (with blown fuse indicators) are included in the drive to provide drive short circuit protection. AC input protection devices for branch circuit protection based on US NEC are listed in the table. Each drive bay has one fuse per phase. (3) Minimum protection device size is the lowest rated device that supplies maximum protection without nuisance tripping. (4) Maximum protection device size is the highest rated device that supplies drive protection. For US NEC, minimum size is 25% of motor FLA. Ratings that are shown are maximum. (5) Circuit breaker - inverse time breaker. For US NEC, minimum size is 25% of motor FLA. Ratings that are shown are maximum. (6) Recommended motor circuit protector - instantaneous trip circuit breaker. The trip setting must be set to the input current of the drive and must be sized for the continuous current of the system. (7) These DC line fuses (with blown fuse indicators) are included in the drive to provide drive short circuit protection. Rockwell Automation Publication 7-TD00K-EN-P - October 7 69

PowerFlex 7-Series AC Drives 6 Volt AC and 932V DC Input Protection Devices - Wall Mount Frames 6 and 7 Applied Rating () Cont. Output Drive Sized For Normal Duty Drive Sized For Heavy Duty Continuous AC Input Cat. No. Output Overload Cat. No. Output Overload Dual Element Time Delay Fuse AC Input Protection Devices Input Quantities Non-Time Delay Fuse Circuit Breaker Max Size (6) Motor Circuit Protector (7) Continuous DC Input (x = F or G) Min 3 s (x = F or G) Min 3 s Min (2) Max (5) Min (2) Max (5) 6 Volt AC Input 932 Volt DC Input 5.5 kw 6 9 x F0 3.5 8.0 8.4 9 25 5 9.9 HSJ5 7.5 kw 6 2 x F0 3.2 8.0 x F05 8.0 22.5.2 4 25 4 35 5 3.2 HSJ kw 6 5 x F05 6.5 22.5 x F0 22.5.0 4. 8 32 8 6.5 HSJ25 DC Input Protection Non-Time Delay Fuse Frame 5 kw 6 x F0 22.0.0 x F023.0 36.0 8.7 23 42 23 55 25 2.9 HSJ35 8.5 kw 6 23 x F023 25.3 34.5 x F0 34.5 45.0 2.6 27 (3), 25 (4) 48 (3), (4) 27 (3), 25 (4) 65 25.2 HSJ 22 kw 6 x F0 33.0 45.0 x F034 45.0 54.0 28. 35 65 35 85 32.9 HSJ kw 6 34 x F034 37.4 5.0 x F046 5.0 69.0 3.9 95 0 37.3 HSJ 37 kw 6 46 x F046.6 69.0 x F0 69.0 82.8 43. 55 95 55 55.5 HSJ 45 kw 6 x F0 55.0 75.0 x F06 75.0 9.5 46.9 5 54.8 HSJ 55 kw 6 6 x F06 67. 9.5 x F082 9.5 23.0 57.2 75 66.9 HSJ0 75 kw 6 82 x F082.2 23.0 x F098 23.0 47.6 76.8 95 75 95 2 2 0 89.9 HSJ kw 6 98 x F098 7.8 47.0 x F9 47.0 78.5 9.8 5 5 5 275 2 5 7.5 HSJ75 kw 6 9 x F9.9 78.5 x F42 78.5 24.2.5 2 335 3.5 HSJ0 32 kw 6 42 x F42 56.2 23.0 33. 65 0 65 0 0 55.7 HSJ2 7 42 x F7 23.0 256.5 33. 65 0 65 0 0 55.7 HSJ2 kw 7 7 x F7 88. 256.5 x F22 256.5 38.0.2 0 3 0 4 4 5 87.5 HSJ0 0 kw 7 22 x F22 233.2 38.0 x F263 38.0 394.5 98.7 2 445 2 595 0 2 232.5 HSJ3 2 kw 7 263 x F263 289.3 394.5 246.5 3 555 3 7 7 3 288.4 HSJ0 () Applied rating refers to the motor that is connected to the drive. For example, a F06 drive can be used in Normal Duty mode on a 55 kw motor, in Heavy Duty mode on a 45 kw motor. The drive can be programmed for each mode. Wiring and fuses can be sized based on the programmed mode. For any given drive catalog number, Normal Duty mode provides higher continuous current but smaller overload current when compared to Heavy Duty mode. See parameter 6 [Duty Rating]. (2) Minimum protection device size is the lowest rated device that supplies maximum protection without nuisance tripping. (3) Normal duty. (4) Heavy duty. (5) Maximum protection device size is the highest rated device that supplies drive protection. For US NEC, minimum size is 25% of motor FLA. Ratings that are shown are maximum. (6) Circuit breaker - inverse time breaker. For US NEC, minimum size is 25% of motor FLA. Ratings that are shown are maximum. (7) Recommended motor circuit protector - instantaneous trip circuit breaker. The trip setting must be set to the input current of the drive and must be sized for the continuous current of the system. Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives 6 Volt AC and 932V DC Input Protection Devices Floor Mount Frames 8 Applied Rating () Cont. Output Duty Cat. No. Output Overload Continuous AC Input AC Input Integral Semiconduct or Fuse Size (M) (2) DC Bay to Bay Integral Semiconductor Fuse Size (M6648) AC Input Protection Devices Recommended for Branch Circuit Protection (Does not apply to 2G Drives with Options) Dual-element Time-delay Fuse Non Time-delay Fuse Circuit Breaker Max Size (5) Input Quantities Motor Circuit Continuous Protector (6) DC Input Min 3 s /Phase 2/Phase Max (4) /Phase 2/Phase Max (4) Min (3) Min (3) Min (3) Min (3) DC Input Integral Semiconductor Fuse Size (M6253) (7) Frame 6V AC Input 932V DC Input 0 kw 8 25 Heavy G F265 323 375 3 0 2 25 0 2 25 0 0 2 237 00 2 kw 8 265 Normal G F265 292 375 2 0 0 0 0 0 0 0 292 00 265 Heavy G F3 398 473 2 0 0 0 0 0 0 0 292 00 0 kw 8 8 Heavy G F3 462 555 2 0 0 0 0 0 0 0 0 0 339 00 35 kw 8 3 Light G F265 363 3 0 0 0 0 0 0 0 0 0 363 00 3 Normal G F3 363 473 3 0 0 0 0 0 0 0 0 0 363 00 355 kw 8 3 Light G F3 7 349 0 4 225 0 4 225 0 0 4 7 00 3 Normal G F3 7 555 349 0 4 225 0 4 225 0 0 4 7 00 3 Heavy G F45 555 639 349 0 4 225 0 4 225 0 0 4 7 00 375 kw 8 375 Heavy G F4 563 675 353 0 4 225 0 4 225 0 0 4 43 00 0 kw 8 4 Light G F3 45 386 0 0 2 0 0 2 0 45 00 45 Normal G F45 457 639 39 0 0 2 0 0 2 0 457 00 43 Heavy G F0 6 7 389 0 0 2 0 0 2 0 454 00 4 kw 8 4 Light G F45 6 433 0 5 275 00 5 275 5 6 00 4 Normal G F4 6 675 433 0 5 275 00 5 275 5 6 00 0 kw 8 0 Light G F4 5 47 0 0 0 0 0 0 0 5 00 0 Normal G F0 5 7 47 0 0 0 0 0 0 0 5 00 5 kw 8 5 Light G F0 583 499 0 6 325 6 325 6 583 00 4 kw 9 4 Heavy G F5 6 885 433 0 00 5 275 00 5 275 5 6 00 0 kw 9 0 Heavy G F6 7 975 47 0 00 0 0 0 0 0 0 5 00 5 kw 9 5 Heavy G F7 885 65 556 0 00 0 3 0 3 0 0 0 649 00 5 Normal G F5 649 885 556 0 00 0 3 0 3 0 0 0 649 00 6 kw 9 6 Heavy G F765 975 62 0 00 7 375 7 375 0 0 7 75 00 6 Normal G F6 75 975 62 0 00 7 375 7 375 0 0 7 75 00 6 Light G F5 75 62 0 00 7 375 7 375 0 0 7 75 00 7 kw 9 7 Heavy G F795 25 3 6 0 00 0 4 0 4 20 20 0 825 00 7 Normal G F7 78 65 669 0 00 0 4 0 4 20 20 0 78 00 7 Light G F6 78 669 0 00 0 4 0 4 20 20 0 78 00 7 kw 9 765 Normal G F765 842 72 0 00 0 4 0 4 20 20 0 842 00 Rockwell Automation Publication 7-TD00K-EN-P - October 7 7

PowerFlex 7-Series AC Drives 6 Volt AC and 932V DC Input Protection Devices Floor Mount Frames 8 (continued) Applied Rating () Cont. Output Duty Cat. No. Output Overload Continuous AC Input AC Input Integral Semiconduct or Fuse Size (M) (2) DC Bay to Bay Integral Semiconductor Fuse Size (M6648) AC Input Protection Devices Recommended for Branch Circuit Protection (Does not apply to 2G Drives with Options) Dual-element Time-delay Fuse Non Time-delay Fuse Circuit Breaker Max Size (5) Frame 0 kw 9 795 Heavy G F9 93 4 749 0 00 9 475 0 9 475 20 20 9 875 00 795 Normal G F795 875 3 749 0 00 9 475 0 9 475 20 20 9 875 00 7 Light G F7 869 744 0 00 9 475 0 9 475 20 20 9 869 00 8 kw 9 8 Light G F765 946 8 0 00 00 0 0 00 0 00 946 00 0 kw 9 9 Normal G F9 56 4 4 0 00 575 00 575 20 20 56 00 9 Light G F795 56 4 0 00 575 00 575 20 20 56 00 865 Heavy G FK0 298 5 85 0 00 00 0 0 00 0 00 952 00 00 kw 9 Light G F795 22 4 0 00 0 20 0 20 20 56 00 Normal G FK0 44 5 9 0 00 2 625 20 2 625 20 20 2 44 00 0 kw Light G FK0 265 3 83 0 00 3 675 3 675 3 265 00 kw Heavy G FK4 7 20 93 0 00 3 675 20 3 675 30 30 3 276 00 kw Normal G FK4 5 20 39 0 00 6 825 00 6 825 00 00 6 5 00 kw 485 Light G FK4 634 782 399 0 00 7 875 30 7 875 40 40 7 634 00 Input Quantities Motor Circuit Continuous Protector (6) DC Input Min 3 s /Phase 2/Phase Max (4) /Phase 2/Phase Max (4) Min (3) Min (3) Min (3) Min (3) DC Input Integral Semiconductor Fuse Size (M6253) (7) 6V AC Input 932V DC Input () Applied rating refers to the motor that is connected to the drive. For example, a F0 drive can be used in Normal Duty mode on a 0 kw motor, in Heavy Duty mode on a 355 kw motor or in Light Duty mode on a 4 kw motor. The drive can be programmed for each mode. Wiring and fuses can be sized based on the programmed mode. For any given drive catalog number, Normal Duty mode provides higher continuous current but smaller overload current when compared to Heavy Duty mode. See parameter 6 [Duty Rating]. (2) These AC line fuses (with blown fuse indicators) are included in the drive to provide drive short circuit protection. AC input protection devices for branch circuit protection based on US NEC are listed in the table. Each drive bay has one fuse per phase. (3) Minimum protection device size is the lowest rated device that supplies maximum protection without nuisance tripping. (4) Maximum protection device size is the highest rated device that supplies drive protection. For US NEC, minimum size is 25% of motor FLA. Ratings that are shown are maximum. (5) Circuit breaker - inverse time breaker. For US NEC, minimum size is 25% of motor FLA. Ratings that are shown are maximum. (6) Recommended motor circuit protector - instantaneous trip circuit breaker. The trip setting must be set to the input current of the drive and must be sized for the continuous current of the system. (7) These DC line fuses (with blown fuse indicators) are included in the drive to provide drive short circuit protection. 72 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Short Circuit Current Ratings for Drives with Options Default ratings (no added protection) shown. A indicates ratings that can be achieved with additional protection. 0V AC Input Drive Cat. No. Frame Duty kw Short Circuit Current Rating (ka) Cycle Circuit Breaker Only (P3) () Circuit Breaker with Input Contactor (P3 with P) () Molded Case Switch Only (P5) (2) 2G C4 8 LD 35 0 65 or 0 with 0 0 A Class L fuse ND 2 0 or 65 with 0 A Class J fuse HD 0 0 5 or 0 with 0 0 A Class J fuse 8 with 0 0 A Class L fuse 8 with 0 A CB 2G C5 8 LD 35 0 65 or 0 with 7 0 A Class L fuse ND 35 0 65 or 0 with 0 0 A Class L fuse HD 2 0 or 65 with 0 A Class J fuse 2G C567 8 LD 355 0 65 or 0 with 0 A Class L fuse ND 35 0 65 or 0 with 7 0 A Class L fuse HD 2 0 or 65 with 0 A Class J fuse 2G C6 8 LD 0 0 42 65 or 0 with 00 A Class L fuse ND 355 0 42 65 or 0 with 8 A Class L fuse HD 35 0 65 or 0 with 0 0 A Class L fuse 2G C7 8 LD 4 0 42 65 or 0 with 00 A Class L fuse ND 0 0 42 65 or 0 with 00 A Class L fuse HD 35 0 65 or 0 with 0 0 A Class L fuse 2G C7 8 LD 4 0 42 65 or 0 with 00 A Class L fuse ND 0 0 42 65 or 0 with 00 A Class L fuse HD 355 0 42 65 or 0 with 0 0 A Class L fuse Molded Case Switch with Input Contactor (P5 with P) (2) 5 or with 0 A Class L fuse with 0 A CB 65 5 or 65 with 0 A Class J fuse with 0 00 A Class L fuse with 0 A CB 65 5 or 0 with 0 0 A Class J fuse 8 with 0 0 A Class L fuse 8 with 0 A CB 5 or with 7 A Class L fuse with 0 A CB 5 or with 0 A Class L fuse with 0 A CB 65 5 or 65 with 0 A Class J fuse with 0 00 A Class L fuse with 0 A CB 5 or with 0 A Class L fuse with 0 A CB 5 or with 7 A Class L fuse with 0 A CB 65 5 or 65 with 0 A Class J fuse with 0 00 A Class L fuse with 0 A CB 5 or 42 with 00 A Class L fuse 42 with 00 A CB 5 or 42 with 8 A Class L fuse 42with 0 A CB 5 or with 0 A Class L fuse with 0 A CB 5 or 42 with 00 0 A Class L fuse 42 with 00 A CB 5 or 42 with 00 A Class L fuse 42 with 00 A CB 5 or with 7 A Class L fuse with 0 A CB 5 or 42 with 0 0 A Class L fuse 42 with 0 A CB 5 or 42 with 00 0 A Class L fuse 42 with 00 A CB 5 or 42 with 0 A Class L fuse 42 with 0 A CB Rockwell Automation Publication 7-TD00K-EN-P - October 7 73

PowerFlex 7-Series AC Drives 0V AC Input (continued) Drive Cat. No. Frame Duty Cycle kw Short Circuit Current Rating (ka) Circuit Breaker Circuit Breaker with Input Only (P3) () Contactor (P3 with P) () Molded Case Switch Only (P5) (2) 2G C9 9 LD 5 0 ND 0 0 HD 0 0 2G CK0 9 LD 6 0 ND 5 0 HD 0 0 2G CK 9 LD 7 0 ND 6 0 HD 0 0 2G CK2 9 LD 0 0 ND 7 0 HD 5 0 2G CK4 9 LD 8 0 ND 0 0 HD 6 0 2G CK5 9 LD 0 0 ND 8 0 HD 7 0 2G CK6 LD 00 ND 0 HD 7 2G C2K LD ND 2 HD 00 () These circuit breakers are considered branch circuit protection for the unit. (2) No additional protection is provided with the P5 molded case switch option. Branch circuit protection is required based on NEC guidelines. Molded Case Switch with Input Contactor (P5 with P) (2) 74 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives 4V AC Input Drive Cat. No. Frame Duty Cycle Hp Short Circuit Current Rating (ka) Circuit Breaker Circuit Breaker with Input Only (P3) () Contactor (P3 with P) () 2G D4 8 LD 0 0 or 65 with 0 A Class J fuse Molded Case Switch Only (P5) (2) ND 3 0 or 65 with 5 0 A Class J fuse HD 0 0 5 or 0 with 4 0 A Class J fuse 8 with 0 0 A Class L fuse 8 with 0 A CB 2G D485 8 LD 4 0 65 or 0 with 0 A Class L fuse ND 0 0 or 65 with 0 A Class J fuse HD 3 0 5 or 0 with 0 0 A Class J fuse 8 with 0 0 A Class L fuse 2G D545 8 LD 0 0 65 or 0 with 0 A Class L fuse ND 4 0 65 or 0 with 6 0 A Class L fuse HD 3 0 or 65 with 5 0 A Class J fuse 2G D67 8 LD 0 0 42 65 or 0 with 8 A Class L fuse ND 0 0 65 or 0 with 7 0 A Class L fuse HD 0 0 or 65 with 0 A Class J fuse Molded Case Switch with Input Contactor (P5 with P) (2) 65 5 or 65 with 0 A Class J fuse with 0 00 A Class L fuse with 0 A CB 65 or 65 with 5 0 A Class J fuse 65 5 or 0 with 0 0 A Class J fuse 8 with 0 0 A Class L fuse 8 with 0 A CB 5 or with 6 A Class L fuse with 0 A CB 65 5 or 65 with 0 A Class J fuse with 0 00 A Class L fuse with 0 A CB 65 5 or 0 with 0 0 A Class J fuse 8 with 0 0 A Class L fuse 5 or with 0 A Class L fuse with 0 A CB 5 or with 6 A Class L fuse with 0 A CB 65 5 or 65 with 5 0 A Class J fuse with 0 00 A Class L fuse with 0 A CB 5 or 42 with 8 A Class L fuse 42 with 0 A CB 5 or with 7 A Class L fuse with 0 A CB 65 5 or 65 with 0 A Class J fuse with 0 00 A Class L fuse with 0 A CB 2G D7 8 LD 6 0 42 65 or 0 with 00 A Class L fuse ND 0 0 42 65 or 0 with 8 A Class L fuse HD 4 0 65 or 0 with 6 0 A Class L fuse 2G D7 8 LD 0 0 42 65 or 0 with 00 A Class L fuse ND 6 0 42 65 or 0 with 0 A Class L fuse HD 0 0 65 or 0 with 7 0 A Class L fuse 5 or 42 with 00 0 A Class L fuse 42 with 00 00 A CB 5 or 42 with 8 A Class L fuse 42 with 0 A CB 5 or with 6 A Class L fuse with 0 A CB 5 or 42 with 00 0 A Class L fuse 42 with 00 00 A CB 5 or 42 with 0 A Class L fuse 42 with 0 00 A CB 5 or with 7 A Class L fuse with 0 A CB Rockwell Automation Publication 7-TD00K-EN-P - October 7 75

PowerFlex 7-Series AC Drives 4V AC Input (continued) Drive Cat. No. Frame Duty Cycle Hp Short Circuit Current Rating (ka) Circuit Breaker Circuit Breaker with Input Only (P3) () Contactor (P3 with P) () Molded Case Switch Only (P5) (2) 2G D0 9 LD 0 0 ND 0 0 HD 0 0 2G D9 9 LD 0 0 ND 0 0 HD 0 0 2G DK0 9 LD 00 0 ND 0 0 HD 7 0 2G DK2 9 LD 0 0 ND 00 0 HD 0 0 2G DK3 9 LD 2 0 ND 0 0 HD 0 0 2G DK4 9 LD 3 0 ND 2 0 HD 00 0 2G DK5 LD ND 3 HD 0 2G D2K0 LD 00 ND 7 HD 6 () These circuit breakers are considered branch circuit protection for the unit. (2) No additional protection is provided with the P5 molded case switch option. Branch circuit protection is required based on NEC guidelines. Molded Case Switch with Input Contactor (P5 with P) (2) 76 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives 0V AC Input Drive Cat. No. Frame Duty Cycle Hp Short Circuit Current Rating (ka) Circuit Breaker Only (P3) () Circuit Breaker with Input Contactor (P3 with P) () Molded Case Switch Only (P5) (2) Molded Case Switch with Input Contactor (P5 with P) (2) 25 25 with 0 A Class J fuse 2G E295 8 LD 3 8 with 0 A Class L fuse 8 with 0 A CB 0 with 0 A Class J fuse ND 0 8 with 0 A Class L fuse 8 with 0 A CB 0 with 0 A Class J fuse HD 2 8 with 0 A Class L fuse 8 with 0 A CB 0 with 0 A Class J fuse 2G E355 8 LD 0 8 with 0 A Class L fuse 8 with 0 A CB 0 with 0 A Class J fuse ND 3 8 with 0 A Class L fuse 8 with 0 A CB 0 with 0 A Class J fuse HD 0 8 with 0 A Class L fuse 8 with 0 A CB 0 with 0 A Class J fuse 2G E395 8 LD 4 with 0 A Class L fuse with 00 A CB ND 0 8 with 0 A Class L fuse 8 with 0 A CB 0 with 0 A Class J fuse HD 3 8 with 0 A Class L fuse 8 with 0 A CB 0 with 0 A Class J fuse 2G E435 8 LD 0 with 00 A Class L fuse with 00 A CB ND 4 with 0 A Class L fuse with 00 A CB HD 3 8 with 0 A Class L fuse 8 with 0 A CB 0 with 0 A Class J fuse 2G E4 8 LD 0 35 with 00 A Class L fuse with 00 A CB ND 0 with 00 A Class L fuse with 00 A CB HD 0 8 with 0 A Class L fuse 8 with 0 A CB 0 with 0 A Class J fuse 2G E5 8 LD 5 35 with 0 A Class L fuse with 0 A CB ND 0 35 with 00 A Class L fuse with 00 A CB HD 4 with 0 A Class L fuse with 00 A CB 2G E595 9 LD 0 ND 0 HD 0 25 25 with 0 A Class J fuse 25 25 with 0 A Class J fuse 25 25 with 0 A Class J fuse 25 25 with 0 A Class J fuse 25 25 with 0 A Class J fuse 0 with 0 A max Class L with 0 A Class L fuse fuse 25 25 with 0 A Class J fuse 25 25 with 0 A Class J fuse 0 with 0 A max Class L with 0 A Class L fuse fuse 0 with 0 A max Class L with 0 A Class L fuse fuse 25 25 with 0 A Class J fuse 0 with 0 A max Class L with 0 A Class L fuse fuse 0 with 0 A max Class L with 0 A Class L fuse fuse 25 25 with 0 A Class J fuse 0 with 0 A max Class L fuse 0 with 0 A max Class L fuse 0 with 0 A max Class L fuse with 0 A Class L fuse with 0 A Class L fuse with 0 A Class L fuse Rockwell Automation Publication 7-TD00K-EN-P - October 7 77

PowerFlex 7-Series AC Drives 0V AC Input (continued) Drive Cat. No. Frame Duty Cycle Hp Short Circuit Current Rating (ka) Circuit Breaker Only (P3) () Circuit Breaker with Input Contactor (P3 with P) () Molded Case Switch Only (P5) (2) 2G E6 9 LD 0 ND 0 HD 0 2G E7 9 LD 0 ND 0 HD 0 2G E825 9 LD 9 ND 0 HD 7 2G E0 9 LD 00 65 ND 9 HD 0 2G E9 9 LD 0 65 ND 00 65 HD 0 2G EK LD 2 ND 0 HD 00 2G EK4 LD ND HD 2 () These circuit breakers are considered branch circuit protection for the unit if the tap is within ft of the breaker input. (2) These switches are 2G, SCCR ratings, with no additional protection provided. Branch circuit protection (fuse) is required based on NEC guidelines for options with P5. Molded Case Switch with Input Contactor (P5 with P) (2) 78 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives 6V AC Input Drive Cat. No. Frame Duty kw Short Circuit Current Rating (ka) Cycle Circuit Breaker Circuit Breaker with Input Contactor Molded Case Switch with Input Only (P3) () (P3 with P) () Molded Case Switch Only (P5) (2) Contactor (P5 with P) (2) 2G F265 8 LD 35 SCCR rating for 6V input contactor not 25 SCCR rating for 6V input contactor not ND 2 available at time of publication. 25 available at time of publication. HD 0 25 2G F3 8 LD 355 25 ND 35 25 HD 2 25 2G F3 8 LD 0 25 ND 355 25 HD 0 25 2G F45 8 LD 4 25 ND 0 25 HD 355 25 2G F4 8 LD 0 25 25 ND 4 25 HD 375 25 2G F0 8 LD 5 25 25 ND 0 25 25 HD 0 25 2G F5 9 LD 6 35 ND 5 35 HD 4 35 2G F6 9 LD 7 35 ND 6 35 HD 0 35 2G F7 9 LD 0 35 ND 7 35 HD 5 35 2G F765 9 LD 8 35 ND 7 35 HD 6 35 2G F795 9 LD 0 35 ND 0 35 HD 7 35 2G F9 9 LD 00 35 ND 0 35 HD 0 35 2G FK0 LD 0 ND 00 HD 0 2G FK4 LD ND HD () These circuit breakers are considered branch circuit protection for the unit if the tap is within ft of the breaker input. (2) These switches are 2G, SCCR ratings, with no additional protection provided. Branch circuit protection (fuse) is required based on NEC guidelines for options with P5. Rockwell Automation Publication 7-TD00K-EN-P - October 7 79

PowerFlex 7-Series AC Drives Cable Considerations This section provides information for cable types and routing. Power Cable Types Acceptable for 0 0 Volt Installations Various cable types are acceptable for drive installations. For an in-depth discussion of cable types, including a table of maximum motor cable lengths, see the Wiring and Grounding Guidelines for Pulse Width Modulated (PWM) AC Drives, publication DRIVES-IN00. Recommended Cable Design Rating/Type 0V 75 C (67 F) Description Four tinned copper conductors with XLPE insulation. Copper braid/aluminum foil combination shield and tinned copper drain wire. PVC jacket. Wiring Considerations This section provides information for power, signal, and I/O wiring. Type Wire Types Description Min Insulation Rating Power () (2) Signal () (3) (4) Digital I/O Safety inputs Homing inputs () (3) (4) Standard Four tinned copper conductors with XLPE insulation. Copper braid/aluminum foil combination shield and tinned copper drain wire. PVC jacket. 0V, 75 C (67 F) Standard analog I/O 0.7 mm 2 (8 AWG), twisted pair, 0% shield with drain. 0V, Remote pot 0.7 mm 2 (8 AWG), 3 conductor, shielded. 75 C (67 94 F) Encoder/ Pulse I/O < m (0 ft) Combined 0.96 mm 2 (24 AWG) individually shielded pairs. Encoder/ Pulse I/O...52 m (0...0 ft) Encoder/ Pulse I/O 52...259 m (0...8 ft) Signal Power Combined Signal Power Combined 0.96 mm 2 (24 AWG) individually shielded pairs. 0.7 mm 2 (8 AWG) individually shielded pairs 0.3 mm 2 (22 AWG), power is 0.0 mm 2 ( AWG) individually shielded pairs. 0.96 mm 2 (24 AWG) individually shielded pairs. 0.7 mm 2 (8 AWG) individually shielded pairs. 0.7 mm 2 (8 AWG) individually shielded pairs. Unshielded Per US NEC or applicable national or local code. 0V, Shielded Multi-conductor 0.7 mm 2 (8 AWG), 3 conductor, shielded. C ( F) shielded cable () Separate control and signal wires from power wires by at least 0.3 m ( ft). (2) The use of shielded wire for AC input power is not always necessary, but is recommended. (3) If the wires are short and contained within a cabinet that has no sensitive circuits, the use of shielded wire is not always necessary, but is recommended. (4) I/O terminals that are labeled ( ) or common are not referenced to earth ground and are designed to reduce common mode interference. Grounding these terminals can cause signal noise. For CE installations, 5V I/O must use shielded cable or have a cable length less than m (98 ft). Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Power Wiring Options This section describes the cabling options available for each Frame 8 drive enclosure. See pages 6 32 for conduit plate dimensions. O X Adequate Spacing Available conduit plates provide adequate spacing for typical cabling. Cable Entry and Exit Routes Possible Evaluation is Required Available conduit plates must be evaluated to determine if cabling fits. Not Possible Insufficient Spacing Conduit plates are not available for the specified configuration. Frame Enclosure Rating Enclosure Code Cabinet Layout Top Entry/ Top Exit Top Entry/ Bottom Exit Bottom Entry/ Top Exit 8 IP, NEMA/UL Type B 0 mm drive cabinet X X O L, P, W 0 mm drive cabinet O O B 0 mm drive with power option bay X O L, P, W 0 mm drive with power option bay O Bottom Entry/ Bottom Exit B 0 mm drive with wiring bay L, P, W 0 mm drive with wiring bay B 0 mm drive with power option and wiring bays L, P, W 0 mm drive with power option bay and wiring bays IP54, NEMA 2 J, K, Y 0 mm drive cabinet X X X J, K, Y 0 mm drive with power option bay X O O J, K, Y 0 mm drive with wiring bay J, K, Y 0 mm drive with power option bay and wiring bays 9 IP, NEMA/UL Type B 0 mm drive cabinet O O O L, P, W 0 mm drive cabinet B 0 mm drive with power option bay X L, P, W 0 mm drive with power option bay O B 0 mm drive with wiring bay L, P, W 0 mm drive with wiring bay B 0 mm drive with power option and wiring bays L, P, W 0 mm drive with power option bay and wiring bays IP54, NEMA 2 J, K, Y 0 mm drive cabinet X X X J, K, Y 0 mm drive with power option bay O O J, K, Y 0 mm drive with wiring bay J, K, Y 0 mm drive with power option bay and wiring bays Rockwell Automation Publication 7-TD00K-EN-P - October 7 8

PowerFlex 7-Series AC Drives Cable Entry and Exit Routes Frame Enclosure Rating Enclosure Code Cabinet Layout Top Entry/ Top Exit Top Entry/ Bottom Exit IP, NEMA/UL Type B 0 mm drive cabinet O O O L, P, W 0 mm drive cabinet O B 0 mm drive with power option bay X X L, P, W 0 mm drive with power option bay O O Bottom Entry/ Top Exit Bottom Entry/ Bottom Exit B 0 mm drive with wiring bay L, P, W 0 mm drive with wiring bay B 0 mm drive with power option and wiring bays L, P, W 0 mm drive with power option bay and wiring bays X IP54, NEMA 2 J, K, Y 0 mm drive cabinet X X X J, K, Y 0 mm drive with power option bay X O O J, K, Y 0 mm drive with wiring bay O J, K, Y 0 mm drive with power option bay and wiring bays Motor Considerations Due to the operational characteristics of AC variable frequency drives, we recommend motors with inverter grade insulation systems that are designed to meet or exceed NEMA MG Part 3..4.2 standards for resistance to spikes of volts. Guidelines must be followed when using non-inverter grade motors to avoid premature motor failures. See Wiring and Grounding Guidelines for Pulse Width Modulated (PWM) AC Drives, publication DRIVES-IN00 for recommendations. Allen-Bradley Permanent Magnet Servo Motors When using a PowerFlex 755 drive to control a permanent magnet motor, the motor feedback device must have a resolution such that the number of pulses per revolution (PPR) is an exponent of 2 (for example: 52, 24, 48, 96, 892, and so on). The following table contains a list of specifications for Allen-Bradley servo motors compatible with PowerFlex 7- Series drives. This information is provided to help configure a PowerFlex 7-Series drive with the appropriate servo motor data. For information about compatibility and configuration of Allen-Bradley servo motors (including Bulletin RDB or RDD-Series Direct Drive motors) and third-party PM motors, contact Rockwell Automation technical support. Allen-Bradley Servo Motors Compatible with PowerFlex 7-Series Drives Cat. No. Motor NP Volts (line-line V rms) Motor NP (A rms) Motor NP Hertz (Hz) Motor NP RPM (oper. rpm) Motor NP Power (kw) Motor Poles Current peak (A rms) System Cont. Stall Torque (N m) MPL-B45K 4 7.8 0.7 2.6 8 9. 8.25 00 MPL-B45F 4 8.3 44.7 2 3.2 8 25.5 4. 00 MPL-B5K 4 8. 8 3 3.5 8 23.3.7 00 Motor Max RPM 82 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Allen-Bradley Servo Motors Compatible with PowerFlex 7-Series Drives (continued) Cat. No. Motor NP Volts (line-line V rms) Motor NP (A rms) Motor NP Hertz (Hz) Motor NP RPM (oper. rpm) Motor NP Power (kw) MPL-B5K 4 4.5 77.3 26 5.4 8 42.4 9.4 00 MPL-B5F 4 4.5.7 9 5.5 8 42.4 26.8 00 MPL-B5F 4 8.4 32.7 9 7. 8 66.5 34 00 MPL-B5J 4 22.6 48 22 7.9 8 66.5 34 30 MPL-B6F 4 22.7 6 5 6. 8 46 36.7 00 MPL-B6F 4 27.2 8.3 2 6.5 8 67.9 48 00 MPL-B6D 4 24 94 4 9.3 8 66.5 62.8 00 MPL-B6F 4 33.9 79.3 7.5 8 67.9 00 MPL-B8D 4 33.6 96 4 2.5 8 67.5 83. 00 MPL-B8C 4 33.6 72.7 2.6 8 69 MPL-B8D 4.3 86.7 5 8 3.2 00 MPL-B9B 4 29.7 62 9 2.7 8 63.6 MPL-B9C 4 38.9 76 4.8 8 88.4 24.3 MPL-B9D 4.2 76.7 5 8 2.5 24.3 00 MPL-B9B 4 3.8 59.3 8 5.02 8.7 62.7 00 MPL-B9C 4 48.2 67.3 6.8 8 99 58.2 MPL-B9D 4 63.6 74.7 8.6 8 4.4 58.2 00 MPM-B5F 4.5 266.7 00 0.75 8 7 2.8 00 MPM-B5T 4 3. 333.3 00 0.9 8 4.5 2.8 00 MPM-B52C 4 2.3 66.7 20.2 8 8.8 2.8 00 MPM-B52F 4 2.9 266.7 00.4 8 5.5 4.74 MPM-B52T 4 5.2 266.7 00.4 8 26.8 4.74 00 MPM-B53E 4 2.7 0 00.4 8 5.3 6.55 MPM-B53F 4 3.2 266.7 00.45 8 22.6 6.55 50 MPM-B53T 4 5.5 266.7 00.45 8 39.2 6.55 00 MPM-B2F 4 3.4 266.7 00.65 8 5.6 5.99 40 MPM-B2M 4 4.9 266.7 00.65 8 22.6 5.99 00 MPM-B2T 4 6.6 266.7 00.65 8.7 5.99 00 MPM-B4C 4 3.4 83.3 27 2 8 5.8.2 27 MPM-B4E 4 4. 66.7 20 2.2 8 24.2.2 00 MPM-B4M 4 7.3 233.3 2.2 8 42.9.2 00 MPM-B65C 4 4.7 0 00 2.5 8.6.7 MPM-B65F 4 8.2 0 00 2.5 8 36.7 00 MPM-B65M 4.9 0 00 2.5 8.2.7 00 MPM-B652C 4 7 66.7 20 3.8 8 23.8 6 20 MPM-B652E 4 8 233.3 4.3 8 42.8 9.4 MPM-B652F 4 233.3 4.3 8 59.5 9.4 40 MPM-B653C 4.5 33.3 00 4.6 8 4.9 26.8 20 Motor Poles Current peak (A rms) System Cont. Stall Torque (N m) Motor Max RPM Rockwell Automation Publication 7-TD00K-EN-P - October 7 83

PowerFlex 7-Series AC Drives Allen-Bradley Servo Motors Compatible with PowerFlex 7-Series Drives (continued) Cat. No. Motor NP Volts (line-line V rms) Motor NP (A rms) Motor NP Hertz (Hz) Motor NP RPM (oper. rpm) Motor NP Power (kw) MPM-B653E 4.2 0 00 5. 8 5.6 26.8 MPM-B653F 4 3.2 0 00 5. 8 66.7 26.8 00 MPM-B252C 4 2.3 33.3 00 5.6 8 39.2 36.7 20 MPM-B252F 4 8.7 66.7 20 5.9 8 69.3 33 40 MPM-B252M 4 2 66.7 20 5.9 8 54 00 MPM-B253B 4 2.7 6.7 7 6.8 8 42.4 48 00 MPM-B253E 4 9.3 33.3 00 7.2 8 69.7 48 00 MPM-B253F 4 22. 33.3 00 7.2 8 69.6 45 30 MPM-B254B 4 3.9 6.7 7 6.9 8 69.3 62.8 00 MPM-B254e 4 8.3 33.3 00 7.5 8 69.5 56 00 MPM-B254F 4 9.8 33.3 00 7.5 8 59.3 56 30 Motor Poles Current peak (A rms) For motor power and feedback cable information, see the Kinetix Motion Control Selection Guide, (publication GMC-SG00). System Cont. Stall Torque (N m) Motor Max RPM 84 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Dimensions and Weights This section provides Frame and rating cross-references. 8V AC and 2V AC Cat. No. Light Duty kw Output Normal Duty kw Output Heavy Duty kw Output Cat. No. Light Duty Hp Output Normal Duty Hp Output Heavy Duty Hp Output 8 Volt 2 Volt x B2P2 0.37 (0.37) () 0.37 (0.37) () x B2P2 0.5(0.5) () 0.5(0.5) () x B4P2 0.75(0.75) () 0.75(0.37) () x B4P2 () () (0.5) () x B6P8.5(.5) ().5(0.75) () x B6P8 2(2) () 2() () x B9P6 2.2(2.2) () 2.2(.5) () x B9P6 3(3) () 3(2) () x B05 4(4) () 2.2(2.2) () x B05 5(5) () 3(3) () x B022 5.5 4 x B022 7.5 5 Enclosure Code/Frame Size F G N R 2 2 2 x B028 7.5 5.5 x B028 7.5 3 3 3 x B042 7.5 x B042 5 x B054 5 x B054 5 4 4 4 x B0 8.5 5 x B0 25 5 5 5 x B0 22 8.5 x B0 25 x B4 22 x B4 x B32 66 x B32 25 0 7 (2) x B 37 x B 6 x B54 45 37 x B54 6 (2) 6 x B92 55 45 x B92 75 x B2 66 55 x B2 0 75 7 x B3 x B3 25 7 x B477 32 x B477 0 25 () Ratings in parenthesis are only applicable for Frame. (2) For Frames 6 and 7, a user-installed flange kit (catalog number -7-FLNG4-Fx) is available to convert a code N drive that provides a NEMA/UL Type 4X/2 back. Rockwell Automation Publication 7-TD00K-EN-P - October 7 85

PowerFlex 7-Series AC Drives 0V AC and 4V AC Cat. No. Light Duty kw Output Normal Duty kw Output Heavy Duty kw Output Cat. No. Light Duty Hp Output Normal Duty Hp Output Heavy Duty Hp Output 0 Volt 4 Volt x C2P 0.75 (0.75) () 0.75 (0.37) () x D2P () () (0.5) () x C3P5.5 (.5) ().5 (0.75) () x D3P4 2 (2) () 2 (.5) () x C5P0 2.2 (2.2) () 2.2 (.5) () x D5P0 3 (3) () 3 (2) () x C8P7 4 (4) () 4 (2.2) () x D8P0 5 (5) () 5 (3) () x C0 5.5 (5.5) () 5.5 (4) () x D0 7.5 (7.5) () 7.5 (5) () x C05 7.5 (7.5) () 5.5 (5.5) () x D04 () () 7.5 (7.5) () x C022 7.5 x D022 5 x C0 5 x D027 5 x C037 8.5 5 x D034 25 x C043 22 8.5 x D0 25 x C0 22 x D052 x C072 37 x D065 x C085 45 37 x D077 x C4 55 45 x D096 75 x C 75 55 x D25 0 75 x C 75 x D56 25 0 x C5 x D86 25 x C2 32 x D248 0 () Ratings in parenthesis are only applicable for Frame. (2) For Frames 6 and 7, a user-installed flange kit (catalog number -7-FLNG4-Fx) is available to convert a code N drive that provides a NEMA/UL Type 4X/2 back. Enclosure Code/Frame Size B, J, L, T F G N K, P, W, Y R 2 2 2 3 3 3 4 4 5 4 5 5 x C2 32 x D2 2 0 7 x C367 0 x D36 0 2 7 (2) 7 x C456 2 0 x D45 3 0 2xG C4 35 2 0 x D4 0 3 0 8 8 2xG C477 2 0 x D477 0 0 7 (2) 7 2xG C5 35 35 2 x D485 4 0 3 2xG C567 355 35 2 x D545 0 4 3 2xG C6 0 355 35 x D67 0 0 0 2xG C7 4 0 355 x D7 6 0 4 2xG C7 4 0 355 x D7 0 6 0 2xG C9 5 0 0 x D0 0 0 0 2xG CK0 6 5 0 x D9 0 0 0 2xG CK 7 6 0 x DK0 00 0 7 2xG CK2 0 7 5 x DK2 0 00 0 2xG CK4 8 0 6 x DK3 2 0 0 2xG CK5 0 8 7 x DK4 3 2 00 2xG CK6 00 0 7 x DK5 3 0 2xG C2K 2 00 x D2K0 00 7 6 8 6 (2) 6 6 9 9 8 86 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives 0V AC and 6V AC Cat. No. Light Duty kw Output Normal Duty kw Output Heavy Duty kw Output Cat. No. Light Duty Hp Output Normal Duty Hp Output Heavy Duty Hp Output Enclosure Code/Frame Size B, J, L, T F 6V 0V G, N 6V 0V K, P, W, Y 6 Volt 0 Volt x EP7 0.5 3 3 x E2P7 2 x E3P9 3 2 x E6P 5 3 x E9P0 7.5 5 x E0 7.5 x F02 7.5 5.5 x E02 7.5 6 6 x E07 5 3 3 x F05 7.5 x E08 5 6 6 x E022 5 3 3 x F0 5 x E023 5 6 6 x F023 8.5 5 x E024 6 6 x E027 25 4 4 x F0 22 8.5 x E028 25 6 6 x E032 25 4 4 x F034 22 x E033 25 6 6 x E04 5 5 x F046 37 x E042 6 6 x E052 5 5 x F0 45 37 x E053 6 6 x F06 55 45 x E063 x F082 75 55 x E077 75 x F098 75 x E099 0 75 x F9 x E25 25 0 x F42 32 x E44 25 x F7 32 x E92 0 7 7 x F22 0 x E242 2 0 x F263 2 0 x E289 0 2 2xG F265 35 2 0 x E295 3 0 2 8 8 2xG F3 355 35 2 x E355 0 3 0 2xG F3 0 355 0 x E395 4 0 3 2xG F45 4 0 355 x E435 0 4 3 2xG F4 0 4 375 x E4 0 0 0 2xG F0 5 0 0 x E5 5 0 4 2xG F5 6 5 4 x E595 0 0 0 9 9 2xG F6 7 6 0 x E6 0 0 0 2xG F7 0 7 5 x E7 0 0 0 2xG F765 8 7 6 x E825 9 0 7 2xG F795 0 0 7 x E0 00 9 0 2xG F9 00 0 0 x E9 0 00 0 2xG FK0 0 00 0 x EK 0 00 2xG FK4 x EK4 2 R Rockwell Automation Publication 7-TD00K-EN-P - October 7 87

PowerFlex 7-Series AC Drives Enclosure Options IMPORTANT IP00, IP, and NEMA/UL Open Type PowerFlex 7-Series drives must be mounted in a clean, dry location. Contaminants such as oils, corrosive vapors, and abrasive debris must be kept out of the enclosure. These enclosures are intended for indoor use primarily to provide a degree of protection against contact with enclosed equipment. These enclosures offer no protection against airborne contaminants. See the following tables for an explanation of enclosure options and the environmental specifications that are found on page 9. Pollution Degree Ratings According to EN 60-5- Pollution Description Degree No pollution or only dry, non-conductive pollution occurs. The pollution has no influence. 2 Normally, only non-conductive pollution occurs. Occasionally, a temporary conductivity that is caused by condensation is to be expected, when the drive is out of operation. 3 Conductive pollution or dry non-conductive pollution occurs, which becomes conductive due to condensation, which is to be expected. 4 The pollution generates persistent conductivity that is caused, for example, by conductive dust or rain or snow. Drive Enclosure Ratings Frames Enclosure Type (Cat. No. Position 6) Installed Accessory Kit Front Side Rating Enclosure Type Pollution Degree Back Side/Heat Sink Rating Enclosure Type Pollution Degree R None IP, NEMA/UL Open Type, 2 IP, NEMA/UL Open Type, 2 NEMA Type IP, NEMA/UL Type, 2 IP, NEMA/UL Type, 2 2 5 N None IP, NEMA/UL Open Type, 2 IP, NEMA/UL Open Type, 2 NEMA Type IP, NEMA/UL Type, 2 IP, NEMA/UL Type, 2 Flange IP, NEMA/UL Type, 2 IP, NEMA/UL Type, 2 F None IP, NEMA/UL Open Type, 2 IP66, NEMA/UL Type 4X, 2, 3, 4 G None IP54, NEMA/UL Type 2, 2, 3, 4 IP54, NEMA/UL Type 2, 2, 3, 4 6 and 7 N None IP00, NEMA/UL Open Type, 2 IP00, NEMA/UL Open Type Kit, 2 NEMA Type IP, NEMA/UL Type, 2 IP, NEMA/UL Type, 2 NEMA Type 4X flange IP00, NEMA/UL Open Type, 2 IP66, NEMA/UL Type 4X, 2, 3, 4 G None IP54, NEMA/UL Type 2, 2, 3, 4 IP54, NEMA/UL Type 2, 2, 3, 4 8 B, L, P, W None IP, NEMA/UL Type, MCC, 2 IP, NEMA/UL Type, 2 J, K, Y None IP54, NEMA 2, 2, 3, 4 IP54, NEMA 2, 2, 3, 4 88 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Minimum Mounting Clearances Specified vertical clearance requirements are intended to be from the drive to the closest object that can restrict airflow through the drive heat sink and chassis. The drive must be mounted in a vertical orientation as shown and must make full contact with the mounting surface. Do not use standoffs or spacers. In addition, inlet air temperature must not exceed the product specification. Wall Mount Frames 7 82 mm (7.2 in.) Floor Mount Frames 8 76.2 mm (3.0 in.) Front View Minimum clearance for proper airflow when hood is not used. Top View 76.2 mm (3.0 in.) Do not impede airflow through the Roll-out Cart 8 mm (33.9 in.) Do not impede airflow through the drive. Approximate Weights Drive Standard (F, G) Standard (G) With options (2G) AC input and common DC input () Only Frame 7 available for 8V, 2V input drives. Frame Drive Rating Enclosure Code/Weight, kg (lb) Size kw (8V (), 0V, 6V) Hp (2V (), 4V, 0V) F G N R 0.37 7.5 0.5 7 (5) 2 0.37 0.5 5 9 () (22) 8 (8) 3 7.5 22 0.5 3 (29) 4 (3) (25) 4 5 37 7 (37) 8 (39) 6 (35) 5 8.5 55 25 24 (54) 26 (57) 24 (52) 6 5.5 75 7.5 0 37 (82) 89 (97) 37 (82) 45 32 0 38 (84) 6 (256) 39 (85) 7 32 0 0 69 (52) 35 (297) 79 (74) 0 2 0 0 96 (22) 62 (357) 6 (234) B, L P, W J K, Y AC input 8 2 0 3 6 623 (374) 45 (2525) 644 (49) 66 (25) 9 0 8 0 2 246 (2748) 22 (5) 287 (2838) 2332 (54) 0 2 3 7 869 (422) 3435 (7576) 93 (4257) 3498 (77) Common DC input 8 2 0 3 6 566 (248) 88 () 586 (293) 9 (2445) 9 0 8 0 2 32 (2497) 276 (4799) 73 (2587) 228 (4889) 0 2 3 7 698 (3745) 3264 (799) 7 (38) 3327 (7334) AC input 8 2 0 3 6 45 (2525) 675 (3694) 66 (25) 696 (3739) 9 0 8 0 2 7 (385) 28 (629) 77 (35) 2862 (69) 0 2 3 7 235 (56) 3965 (8745) 2377 (524) 28 (88) Rockwell Automation Publication 7-TD00K-EN-P - October 7 89

PowerFlex 7-Series AC Drives Maximum Component Weights - Frames 8 Component AC Input, kg (lb) Common DC Input, kg (lb) Converter/DC input with precharge 64 () 64 () Inverter 222 (4) 65 (363) Drive assembly (Open, IP00) 329 (725) 229 (4) Approximate Dimensions This section provides the approximate dimensions for the drives. Dimension Drawing Index Frame Description Page IP, NEMA/UL Type Open 9 2 IP, NEMA/UL Type Open 9 Flange Mount 92 IP54, NEMA/UL Type 2 93 3 IP, NEMA/UL Open Type 93 Flange Mount 94 IP54, NEMA/UL Type 2 95 4 IP, NEMA/UL Open Type 95 Flange Mount 96 IP54, NEMA/UL Type 2 97 5 IP, NEMA/UL Open Type 97 Flange Mount 98 IP54, NEMA/UL Type 2 99 6 IP00, NEMA/UL Open Type 0 Flange Mount IP54, NEMA/UL Type 2 2 7 IP00, NEMA/UL Open Type 3 Flange Mount 4 NEMA/UL Type 5 IP54, NEMA/UL Type 2 6 8 MCC Style Cabinet, 0 mm (23.6 in.) Deep - IP 6 MCC Style Cabinet with Wiring Bay, 0 mm (23.6 in.) Deep - IP 8 MCC Style Cabinet with Cabinet Option Bay, 0 mm (23.6 in.) Deep - IP 9 MCC Style Cabinet with Wiring Bay and Cabinet Option Bay, 0 mm (23.6 in.) Deep - IP MCC Style Cabinet, 0 mm (3.5 in.) Deep - IP MCC Style Cabinet with Wiring Bay, 0 mm (3.5 in.) Deep - IP 2 MCC Style Cabinet with Cabinet Option Bay, 0 mm (3.5 in.) Deep - IP 3 MCC Style Cabinet with Wiring Bay and Cabinet Option Bay, 0 mm (3.5 in.) Deep - IP 4 MCC Style Cabinet, 0 mm (3.5 in.) Deep - IP54 5 MCC Style Cabinet with Wiring Bay, 0 mm (3.5 in.) Deep - IP54 6 MCC Style Cabinet with Cabinet Option Bay, 0 mm (3.5 in.) Deep - IP54 7 MCC Style Cabinet with Wiring Bay and Cabinet Option Bay, 0 mm (3.5 in.) Deep - IP54 8 Open Style - AC Input 9 Open Style - DC Input Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Dimension Drawing Index (continued) Frame Description Page 9 MCC Style Cabinet, 0 mm (23.6 in.) Deep - IP 2 MCC Style Cabinet with Wiring Bay, 0 mm (23.6 in.) Deep - IP 22 MCC Style Cabinet with Cabinet Option Bay, 0 mm (23.6 in.) Deep - IP 23 MCC Style Cabinet with Cabinet Option Bay and Wiring Bay, 0 mm (23.6 in.) Deep - IP 24 MCC Style Cabinet, 0 mm (3.5 in.) Deep - IP 25 MCC Style Cabinet with Wiring Bay, 0 mm (3.5 in.) Deep - IP 26 MCC Style Cabinet with Cabinet Option Bay, 0 mm (3.5 in.) Deep - IP 27 MCC Style Cabinet with Cabinet Option Bay and Wiring Bay, 0 mm (3.5 in.) Deep - IP 28 MCC Style Cabinet, 0 mm (3.5 in.) Deep - IP54 29 MCC Style Cabinet with Wiring Bay, 0 mm (3.5 in.) Deep - IP54 MCC Style Cabinet with Cabinet Option Bay, 0 mm (3.5 in.) Deep - IP54 3 MCC Style Cabinet with Cabinet Option Bay and Wiring Bay, 0 mm (3.5 in.) Deep - IP54 32 Open Style - AC Input 33 Open Style - DC Input 34 MCC Style Cabinet, 0 mm (23.6 in.) Deep - IP 35 MCC Style Cabinet, 0 mm (3.5 in.) Deep - IP 36 MCC Style Cabinet 0 mm (3.5 in.) Deep - IP54 37 Open Style - AC Input 38 Open Style - DC Input 39 6 NEMA/UL Type Kit 5 NEMA/UL Type Bottom View 4 5 EMC Plate and Cores Kit 42 Frame Type Approximate Dimensions mm (in.), 2 IP, NEMA/UL Type Open A D 6.4 (0.25) 4.3 (0.56) C Frame 2 Shown B F Frame A B C D E F Weight kg (lb).0 (4.33) 2 34.5 (5.) 0.5 (5.77) 424.2 (6.) 2.0 (8.3) 22.0 (8.35) 68.0 (2.68) 0.0 (3.94) 82.0 (3.23) 0.0 (3.94) 3.4 (5.37) 4.2 (5.9) 6.0 (2.75) 7.8 (7.2) E Rockwell Automation Publication 7-TD00K-EN-P - October 7 9

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 2 Flange Mount 6.2 (8.2) 22.0 (8.35) 48.8 (8.97) 94.2 (3.7) 9.2 (0.76) 88.3 (7.4) 69.2 (6.66) 4x: Ø4.00 (Ø0.57) 4.6 (8.3) 395.3 (5.56) 285.3 (.23) 75.3 (6.) 399. +./-0.00 (5.7 +0./-0.0) 63.7 (2.5) Important: Supplied mounting hardware must be used to meet enclosure rating. 65.3 (2.57).2 (.9) 28.00 +./-0.00 (5.0 +0./-0.0).5 (.) 92 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 2 IP54, NEMA/UL Type 2 25.3 (8.48) 0.0 (3.94) 6.4 (0.25) 4.3 (0.56) 222.2 (8.75) 528.2 (.) 543.2 (2.39) 88. (3.47) 85.7 (3.37) 65. (2.56) 44.5 (.75) 42. (.66) 2x: Ø22.0 (Ø0.87) 79.4 (7.06) 46.4 (5.76) 9.4 (4.3) 3x: Ø29.0 (Ø.4) 3 IP, NEMA/UL Open Type.0 (7.48) 58.0 (6.22) 6.4 (0.25) 4.3 (0.56) 22.0 (8.35) 435.0 (7.3) 454.0 (7.87) Rockwell Automation Publication 7-TD00K-EN-P - October 7 93

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 3 Flange Mount 2.0 (.24) 22.0 (8.35) 55.0 (.28).3 (4.74) 32.3 (.27) 2.5 (9.47) 8.3 (8.) 6x: Ø4.00 (Ø0.57) 495.5 (9.5) 457.8 (8.02) 352.8 (3.89) 434.00 +./-0.00 (7.087 +0.0/-0.000) Important: Supplied mounting hardware must be used to meet enclosure rating. 247.8 (9.76) 42.8 (5.62) 4x: 5.00R (0.97R) 37.8 (.48).75 (.2) 79.00 +./-0.00 (7.047 +0.0/-0.000).75 (.2) 84.6 (3.33) 94 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 3 IP54, NEMA/UL Type 2 268.0 (.55) 58.0 (6.22) 85.5 (7.) 6.4 (0.25) 4.3 (0.56) 2. (8.67) 533.0 (.98) 55.0 (2.69) 92.8 (3.65) 62.3 (2.45) 49.8 (.96) 35.8 (5.35) 23.3 (4.85) 3x: Ø22.2 (Ø0.87) 2x: Ø43.7 (Ø.72) 83.5 (7.22) 36.5 (5.37) 4 IP, NEMA/UL Open Type 94.0 (7.64) 222.0 (8.74) 6.4 (0.25) 4.3 (0.56) 22.0 (8.35) 455.0 (7.9) 474.0 (8.66) 2.0 (7.95) Rockwell Automation Publication 7-TD00K-EN-P - October 7 95

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 4 Flange Mount 292.0 (.) 2.9 (8.34) 535.0 (2.06) 48.25 (.0) 272. (.728) 224.25 (8.829) 36.25 (5.364) 6x: Ø4.00 (Ø0.57) 55. (.295) 477.75 (8.9) 367.75 (4.478) 257.75 (.48) 47.75 (5.87) 4x: 5.00R (0.97R) 454.00 +./-0.00 (7.874 +0.0/-0.000) Important: Supplied mounting hardware must be used to meet enclosure rating. 37.75 (.486).75 (.2) 2.00 +./-0.00 (8.7 +0.0/-0.000).75 (.2) 84.5 (3.33) 96 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 4 IP54, NEMA/UL Type 2 0.0 (.8) 94.0 (7.64) 27.5 (8.56) 6.4 (0.25) 4.3 (0.56) 2. (8.67) 553.0 (2.77) 57.0 (22.48) 8.8 (4.28) 76.8 (3.02) 5.8 (2.04) 65.8 (6.53).8 (5.54) 3x: Ø22.2 (Ø0.87) 82.0 (7.7) 36.5 (5.37) 2x: Ø43.7 (Ø.72) 5 IP, NEMA/UL Open Type 238.0 (9.37) 2.0 (.63) 6.4 (0.25) 4.3 (0.56) 22.0 (8.35) 53.0 (.9) 5.0 (2.65) Rockwell Automation Publication 7-TD00K-EN-P - October 7 97

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 5 Flange Mount 3.0 (3.39) 2.9 (8.34) 6.0 (24.06).25 (4.734).25 (.585) 3. (2.68) 2.25 (.033) 0.25 (7.884) 22x: Ø4.00 (Ø0.57) 59. (23.287) 5.75 (2.683) 465.75 (8.337) 3.75 (4.9) 53.0 +.8/-0.0 (.9 +0.07/-0.00) 295.75 (.644) 2.75 (8.297) 25.75 (4.95) 4x: 5.00R (0.97R).75 (.4).75 (.2) 259.0 +.8/-0.0 (. +0.07/-0.00).25 (.9) Important: Supplied mounting hardware must be used to meet enclosure rating. 84.5 (3.33) 98 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 5 IP54, NEMA/UL Type 2 348.0 (3.) 238.0 (9.37) 265.5 (.45) 6.4 (0.25) 4.3 (0.56) 2. (8.67) 629.0 (24.76) 647.0 (25.47) 6.4 (0.25) 92.8 (3.65) 52.8 (2.08) 22.8 (8.38) 72.8 (6.) 32.8 (5.23) 3x: Ø22.2 (Ø0.87) 8.9 (7.6) 4.9 (5.59) 2x: Ø.0 (Ø.97) Rockwell Automation Publication 7-TD00K-EN-P - October 7 99

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 6 IP00, NEMA/UL Open Type 8.0 (2.3) 8.4 (8.) 346.4 (3.64) 665.5 (26.) 644.0 (25.35) 6.4 (0.25) ø6.5 (0.26) ø4.5 (0.57) 254.0 (.00) 283.0 (.4) 4.5 (0.57) Important: Always install mounting hardware in all four corners of the mounting legs for stability. Only install mounting hardware through the top key holes to help insure the drive is securely fastened to the mounting surface. At the bottom of the mounting legs, either the key holes or optional open mounting slots can be used. 9.0 (23.98) 623.0 (24.53) 0 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 6 Flange Mount 8.0 (2.3) 8.4 (8.) 346.4 (3.64) 665.5 (26.) 9.0 (3.58) 58.5 (2.) 26.0 (.02) 284.0 (.8) 258.0 (.6) 225.5 (8.88) 93.0 (7.) 24x: Ø6.4 (Ø0.25) 624.0 (24.57) 0.0 (23.62) 562.0 (22.3) 462.0 (8.9) 38.0 (5.43) 362.0 (4.25) 262.0 (.3) 62.0 (6. 38) 56.0 +2.0/-.5 (22.09 +0.08/-0.06) Important: Supplied mounting hardware must be used to meet enclosure rating. 62.0 (2.44) 24.0 (0.94) 8.0 (0.) 268.0 +2.0/-.5 (. +0.08/-0.06) 3.5 (.24) Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 6 IP54, NEMA/UL Type 2 558.8 (22.00) 9.4 (23.99) 464.7 (8.) 298.3 (5.) 238.3 (48.75).5 (0.4) ø22.0 (0.87) 58. (4.66) No. Description Shown with the field-installed -HIM-C6S. 2 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 7 IP00, NEMA/UL Open Type 4.0 (6.93) 7.9 (8.9) 349.6 (3.76) 88.5 (34.) 875.0 (34.45) 3.0 (2.99) 3.0 (4.96) 8.5 (0.33) ø8.5 (0.33) ø6.0 (0.63) 838.0 (32.99) 825.0 (32.48) 25.0 (0.98) Important: Always install mounting hardware in all four corners of the mounting legs for stability. Only install mounting hardware through the top key holes to help insure the drive is securely fastened to the mounting surface. At the bottom of the mounting legs, either the key holes or optional open mounting slots can be used. Rockwell Automation Publication 7-TD00K-EN-P - October 7 3

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 7 Flange Mount 4.0 (6.93) 8.4 (8.) Important: Supplied mounting hardware must be used to meet enclosure rating. 875.0 (34.45).38 (.98) 3.00 (5.87) 352.63 (3.88) 25.88 (9.92) 5.3 (5.95) 32x: Ø7.0 (Ø0.28) 82.0 (3.97) 784.0 (.87) 744.8 (29.32) 666.4 (26.24) 588.0 (23.5) 9.6 (.06) 43.2 (6.98) 352.8 (3.89) 274.4 (.) 96.0 (7.72) 7.6 (4.63) 768.0 (.24) 39.2 (.54) 28.0 (.) 8.0 (0.3) 387.0 (5.24) 8.0 (0.3) 38.0 (5.43) 4 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 7 NEMA/UL Type 4.0 (6.93) 3.0 (4.96) 27.0 (.04) 22.0 (48.07) 88.8 (34.72) 825.0 (32.48) 8.5 (0.33) ø6.0 (0.63) 339.2 (3.35) 389.2 (5.32).5 (0.8) 389.0 (5.3) 56.0 (22.08) 4.0 (6.93) Rockwell Automation Publication 7-TD00K-EN-P - October 7 5

PowerFlex 7-Series AC Drives Frame Type 7 MCC IP54, Style NEMA/UL Cabinet, Type 0 2 mm (23.6 in.) Deep IP, NEMA/UL Type Enclosure Code B Approximate Dimensions mm (in.) 558.8 (22.00) 9.6 (24.00) 464.8 (8.) 64.0 (63.54) 543. (.75).5 (0.4) ø22.0 (0.87) 58.4 (4.67) No. Description Shown with the field-installed -HIM-C6S. 6 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 8 4 (7.3) 68 (2.7) 2 76 (3.0) 0 (23.6) 27 (5.0) 3 2 (9.4) 0 (23.6) 2453 (96.6) 20 (.6) 4 464 (57.6) 83 (46.6) 76 (3.0) ø8.0 (0.7) No. Description Power wiring conduit plates. 27 (5.0) 4 (5.6) 2 0 (9.7) 542 (2.3) 2 Control wiring conduit plates. 3 Shown with optional hood (catalog number -7-HOOD-F8). If hood is not used, allow sufficient top clearance for proper airflow. See page 89. 53 (.9) 0 (.8) 69 (2.7) 43 (.7) 4 Optional HIM. Rockwell Automation Publication 7-TD00K-EN-P - October 7 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 8 MCC Style Cabinet with Wiring Bay, 0 mm (23.6 in.) Deep IP, NEMA/UL Type Enclosure Code B 68 (2.7) 4 (7.3) 4 (7.3) 83 (7.2) 2 76 (3.0) 27 (5.0) (47.2) 83 (7.2) 2 (9.4) 0 (23.6) 3 2453 (96.6) 20 (.6) 4 464 (57.6) 27 (5.0) 4 (5.6) 76 (3.0) 2 0 (9.7) 3 (44.5) 0 (35.4) 669 (26.3) 344 (3.5) 398 (5.7) 4 (8.) 53 (.9) 0 (.8) 69 (2.7) ø8.0 (0.7) 542 (2.3) 43 (.7) No. Description Power wiring conduit plates. 2 Control wiring conduit plates. 3 Shown with optional hood (catalog number -7-HOOD-F8). If hood is not used, allow sufficient top clearance for proper airflow. See page 89. 4 Optional HIM. 8 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 8 MCC Style Cabinet with Cabinet Option Bay, 0 mm (23.6 in.) Deep IP, NEMA/UL Type Enclosure Code B 68 (2.7) 4 (7.3) 4 (7.3) 57 (2.3) 273 (.8) 76 (3.0) 27 (5.0) 2 (47.2) 3 2 (9.4) 0 (23.6) 2453 (96.6) 20 (.6) 4 464 (57.6) 8 (7.2) 27 (5.0) 4 (5.6) 76 (3.0) 2 0 (9.7) 3 (44.5) 0 (35.4) 5 (8.) 669 (26.3) 4 (7.3) 53 (.9) 0 (.8) 69 (2.7) ø8.0 (0.7) 542 (2.3) 43 (.7) No. Description Power wiring conduit plates. 2 Control wiring conduit plates. 3 Shown with optional hood (catalog number -7-HOOD-F8). If hood is not used, allow sufficient top clearance for proper airflow. See page 89. 4 Optional HIM. Rockwell Automation Publication 7-TD00K-EN-P - October 7 9

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 8 MCC Style Cabinet with Wiring Bay and Cabinet Option Bay, 0 mm (23.6 in.) Deep IP, NEMA/UL Type Enclosure Code B 68 (2.7) 76 (3.0) 4 (7.3) 27 (5.0) 2 3 4 (7.3) 83 (7.2) 0 (.9) 83 (7.2) 4 (7.3) 57 (2.3) 273 (.8) 2 (9.4) 0 (23.6) 2453 (96.6) 4 20 (.6) 8 (7.2) 464 (57.6) 27 (5.0) 4 (5.6) 76 (3.0) ø8.0 (0.7) 2 0 (9.7) 398 (5.7) 344 (3.5) 4 (8.) 0 (35.4) 3 (44.5) 269 (.0) (59.) 73 (68.) 5 (8.) 4 (7.3) 0 (.8) 53 (.9) 669 (26.3) 69 (2.7) 542 (2.3) 43 (.7) No. Description Power wiring conduit plates. 2 Control wiring conduit plates. 3 Shown with optional hood (catalog number -7-HOOD-F8). If hood is not used, allow sufficient top clearance for proper airflow. See page 89. 4 Optional HIM. Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 8 MCC Style Cabinet, 0 mm (3.5 in.) Deep IP, NEMA/UL Type Enclosure Code L (AC Input) Enclosure Codes P, W (DC Input) 4 (7.3) 2 2 (.6) 76 (3.0) 0 (23.6) 27 (5.0) 3 2 (9.4) 0 (3.5) 4 2453 (96.6) 5 20 (.6) 862 (73.3) 464 (57.6) 374 (54.) 76 (3.0) ø8.0 (0.7) No. Description Power wiring conduit plates. 27 (5.0) 292 (.5) 2 4 (7.3) 742 (29.2) 2 Control wiring conduit plates. 3 Shown with optional hood (catalog number -7-HOOD-F8). If hood is not used, allow sufficient top clearance for proper airflow. See page 89. 4 Disconnect switch - Common DC Input drives. 53 (.9) 0 (.8) 69 (2.7) 43 (.7) 5 Optional HIM. Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 8 MCC Style Cabinet with Wiring Bay, 0 mm (3.5 in.) Deep IP, NEMA/UL Type Enclosure Code L, P, W 268 (.5) 4 (7.3) 4 (7.3) 266 (.5) 266 (.5) 78 (3.) 27 (5.0) 2 (47.2) 2 (9.4) 0 (3.5) 3 2453 (96.6) 4 20 (.6) 464 (57.6) 76 (3.0) ø8.0 (0.7) 27 (5.0) 2 0 (7.9) 742 (29.2) No. Description 267 (.6) Power wiring conduit plates. 2 (.6) 4 (7.3) 3 (44.5) 0 (35.4) 669 (26.3) 4 (7.3) 53 (.9) 0 (.8) 43 69 (.7) (2.7) 2 Control wiring conduit plates. 3 Shown with optional hood (catalog number -7-HOOD-F8). If hood is not used, allow sufficient top clearance for proper airflow. See page 89. 4 Optional HIM. 2 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 8 MCC Style Cabinet with Cabinet Option Bay, 0 mm (3.5 in.) Deep IP, NEMA/UL Type Enclosure Codes L, P, W 2 (.6) 4 (7.3) 4 (7.3) 2 (.6) 76 (3.0) 27 (5.0) 2 3 (47.2) 2 (9.4) 0 (3.5) 4 2453 (96.6) 20 (.6) 5 464 (57.6) 8 (7.2) 76 (3.0) ø8.0 (0.7) 27 (5.0) 292 (.5) 2 3 (44.5) 4 (7.3) 0 (35.4) 0 (7.9) 669 (26.3) 4 (7.3) 53 (.9) 0 (.8) 69 (2.7) 742 (29.2) 43 (.7) No. Description Power wiring conduit plates. 2 Control wiring conduit plates. 3 Shown with optional hood (catalog number -7-HOOD-F8). If hood is not used, allow sufficient top clearance for proper airflow. See page 89. 4 Option bay disconnect switch. 5 Optional HIM. Rockwell Automation Publication 7-TD00K-EN-P - October 7 3

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 8 MCC Style Cabinet with Wiring Bay and Cabinet Option Bay, 0 mm (3.5 in.) Deep IP, NEMA/UL Type Enclosure Code L, P, W 268 (.5) 4 (7.3) 4 (7.3) 4 (7.3) 259 (.2) 259 (.2) 78 (3.) 27 (5.0) 2 3 0 (.9) 2 (9.4) 0 (3.5) 2453 (96.6) 4 20 (.6) 8 (7.2) 464 (57.6) 27 (5.0) 2 (.6) 76 (3.0) 2 0 (7.9) 4 (7.3) 2 (.6) 4 (7.3) 0 (35.4) 3 (44.5) 269 (.0) (59.) 73 (68.) 0 (7.9) 2 (.6) 4 (7.3) 0 (.8) 53 (.9) 669 (26.3) ø8.0 (0.7) 742 (29.2) 43 69 (.7) (2.7) No. Description Power wiring conduit plates. 2 Control wiring conduit plates. 3 Shown with optional hood (catalog number -7-HOOD-F8). If hood is not used, allow sufficient top clearance for proper airflow. See page 89. 4 Optional HIM. 4 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 8 MCC Style Cabinet, 0 mm (3.5 in.) Deep IP54, NEMA 2 Enclosure Codes K, Y (DC Input) IP54, UL Type 2 Enclosure Code J (AC Input) 2 76 (3.0) 0 (23.6) 27 (5.0) 2 (9.4) 898 (35.4) 0 (3.5) 2477 (97.5) 20 (.6) 3 464 (57.6) 547 (2.5) 6 (26.8) 374 (54.) 27 (5.0) 2 76 (3.0) ø8.0 (0.7) No. Description Power wiring conduit plates. 292 (.5) 4 (7.3) 742 (29.2) 2 Control wiring conduit plates. 3 Optional HIM. 0 (.8) 53 (.9) 69 (2.7) 43 (.7) Rockwell Automation Publication 7-TD00K-EN-P - October 7 5

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 8 MCC Style Cabinet with Wiring Bay, 0 mm (3.5 in.) Deep IP54, NEMA 2 Enclosure Codes K, Y (DC Input) IP54, UL Type 2 Enclosure Code J (AC Input) 78 (3.) 27 (5.0) 2 (47.2) 4 (8.9) 3 (2.2) 3 (2.2) 244 (9.6) 9 (35.8) 0 (3.5) 2477 (97.5) 3 20 (.6) 464 (57.6) 556 (2.9) 675 (26.6) 556 (2.9) 76 (3.0) ø8.0 (0.7) 24 (.0) 27 (5.0) 2 2 0 (7.9) No. Description 2 (.6) 4 (7.3) 4 (7.3) 742 (29.2) 2 (.6) Power wiring conduit plates. 2 Control wiring conduit plates. 3 Optional HIM. 3 (44.5) 0 (35.4) 669 (26.3) 53 (.9) 0 (.8) 69 (2.7) 43 (.7) 6 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 8 MCC Style Cabinet with Cabinet Option Bay, 0 mm (3.5 in.) Deep IP54, NEMA 2 Enclosure Codes K, Y (DC Input) IP54, UL Type 2 Enclosure Code J (AC Input) 78 (3.) 2 4 (8.9) 27 (5.0) 27 (5.0) (47.2) 2 244 (9.6) (.6) 0 (3.5) 3 3 (67.0) 2477 (97.5) 20 (.6) 464 (57.6) 556 (2.9) 675 (26.6) 556 (2.9) 76 (3.0) 76 (3.0) ø8.0 (0.7) 24 (.0) 27 (5.0) 2 2 No. Description 2 (.6) 4 (7.3) 4 (7.3) 742 (29.2) Power wiring conduit plates. 2 Control wiring conduit plates. 3 Optional HIM. 3 (44.5) 0 (35.4) 669 (26.3) 53 (.9) 0 (.8) 69 (2.7) 43 (.7) Rockwell Automation Publication 7-TD00K-EN-P - October 7 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 8 MCC Style Cabinet with Wiring Bay and Cabinet Option Bay, 0 mm (3.5 in.) Deep IP54, NEMA 2 Enclosure Codes K, Y (DC Input) IP54, UL Type 2 Enclosure Code J (AC Input) 78 (3.) 4 (8.9) 4 (8.9) 3 (2.2) 2 2 27 (5.0) 27 (5.0) 0 (.9) 3 (2.2) 244 (9.6) (.6) 0 (3.5) 3 3 (67.0) 2477 (97.5) 20 (.6) 464 (57.6) 556 (2.9) 675 (26.6) 556 (2.9) 27 (5.0) 2 (.6) 76 (3.0) 2 2 0 2 (7.9) 4 (7.3) 2 (.6) 4 (7.3) 0 (7.9) 2 (.6) 4 (7.3) ø8.0 (0.7) 742 (29.2) 24 (.0) No. Description Power wiring conduit plates. 2 Control wiring conduit plates. 3 Optional HIM. 0 (35.4) 3 (44.5) 269 (.0) (59.) 73 (68.) 0 (.8) 53 (.9) 669 (26.3) 69 (2.7) 43 (.7) 8 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 8 Open Style IP00, NEMA/UL Open Type Enclosure Code T (AC Input) 777.9 (.63) 978.8 (77.9) 728.6 (68.05).6 (63.02) 472.6 (57.98) 2.8 (83.4) 65.6 (8.32) 69.8 (63.77) 228.3 (48.36) 0.0 (43.3) 245.0 (84.45) 35.2 (.3) 953. (37.52) 788.0 (3.02) 623.0 (24.53) 466.0 (8.35) 236.0 (9.29) 9.2 (4.69) 0.0 4.5 (6.56) Outside of Cabinet Post 54.4 (2.4) Max. Backset 93.9 (3.) 3.9 (5.) 0.0 7.0 (0.67) Rockwell Automation Publication 7-TD00K-EN-P - October 7 9

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 8 Open Style IP00, NEMA/UL Open Type Enclosure Code T (DC Input) 777.9 (.63) 978.8 (77.9) 2.8 (83.4) 69.8 (63.77) TESTPOINTS DC+ DC- 228.3 (48.36) 35.2 (.3) 0.0 (43.3) 953. (37.52) PE 788.0 (3.02) 623.0 (24.53) PE PE 466.0 (8.35) 236.0 (9.29) 9.2 (4.69) 0.0 (0.00) 4.5 (6.56) 9.9 (2.) 93.9 (3.) 0.0 (0.00) Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 9 MCC Style Cabinet, 0 mm (23.6 in.) Deep IP, NEMA/UL Type Enclosure Code B 4 (7.3) 4 (7.3) 68 (2.7) 2 2 76 (3.0) 27 (5.0) (47.2) 27 (5.0) 2 (9.4) 0 (23.6) 3 2453 (96.6) 20 (.6) 4 464 (57.6) 76 (3.0) 76 (3.0) ø8.0 (0.7) No. Description 27 (5.0) 4 (5.6) 2 2 0 (9.7) 3 (44.5) 0 (35.4) 669 (26.3) 0 (9.7) 53 (.9) 0 (.8) 69 (2.7) 542 (2.3) 43 (.7) Power wiring conduit plates. 2 Control wiring conduit plates. 3 Shown with optional hood (catalog number -7-HOOD-F8). If hood is not used, allow sufficient top clearance for proper airflow. See page 89. 4 Optional HIM. Rockwell Automation Publication 7-TD00K-EN-P - October 7 2

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 9 MCC Style Cabinet with Wiring Bay, 0 mm (23.6 in.) Deep IP, NEMA/UL Type Enclosure Code B 68 (2.7) 4 (7.3) 4 (7.3) 4 (7.3) 83 (7.2) 76 (3.0) 27 (5.0) 2 27 (5.0) 2 0 (.9) 83 (7.2) 0 (23.6) 2 (9.4) 3 2453 (96.6) 4 20 (.6) 464 (57.6) 76 (3.0) 76 (3.0) ø8.0 (0.7) 27 (5.0) 4 (5.6) 73 (68.) 2 2 0 (9.7) 0 (9.7) (59.) 3 269 (44.5) (.0) 0 (35.4) 669 (26.3) 344 (3.5) 4 (8.) 53 (.9) 0 (.8) 542 (2.3) 398 (5.7) 69 (2.7) 43 (.7) No. Description Power wiring conduit plates. 2 Control wiring conduit plates. 3 Shown with optional hood (catalog number -7- HOOD-F8). If hood is not used, allow sufficient top clearance for proper airflow. See page 89. 4 Optional HIM. 22 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 9 MCC Style Cabinet with Cabinet Option Bay, 0 mm (23.6 in.) Deep IP, NEMA/UL Type Enclosure Code L (AC Input) Enclosure Codes P, W (DC Input) 68 (2.7) 76 (3.0) 4 (7.3) 4 (7.3) 2 2 27 (5.0) 27 (5.0) 0 (.9) 4 (7.3) 57 (2.3) 273 (.8) 2 (9.4) 0 (23.6) 3 2453 (96.6) 4 5 20 (.6) 6 464 (57.6) 76 (3.0) 76 (3.0) ø8.0 (0.7) 27 (5.0) 2 2 5 (8.) 4 (7.3) 542 (2.3) 4 (5.6) 0 (9.7) 0 (9.7) 3 (44.5) 269 (.0) (59.) 73 (68.) 0 (.8) 53 (.9) 669 (26.3) 0 (35.4) 69 (2.7) 43 (.7) No. Description Power wiring conduit plates. 2 Control wiring conduit plates. 3 Shown with optional hood (catalog number -7-HOOD-F8). If hood is not used, allow sufficient top clearance for proper airflow. See page 89. 4 Optional HIM. 5 Option bay disconnect switch access door. 6 Interlock override switch. Rockwell Automation Publication 7-TD00K-EN-P - October 7 23

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 9 MCC Style Cabinet with Cabinet Option Bay and Wiring Bay, 0 mm (23.6 in.) Deep IP, NEMA/UL Type Enclosure Codes L, P, W 68 (2.7) 76 (3.0) 4 (7.3) 27 (5.0) 4 (7.3) 2 3 27 (5.0) 2 (94.5) 4 (7.3) 57 (2.3) 4 (7.3) 273 (.8) 83 (7.2) 83 (7.2) 2 (9.4) 0 (23.6) 2453 (96.6) 4 5 20 (.6) 6 464 (57.6) 27 (5.0) 4 (5.6) 76 (3.0) 76 (3.0) 5 (8.) 4 (7.3) 398 (5.7) 344 (3.5) 0 (9.7) 0 (9.7) 4 (8.) 269 (.0) (59.) 73 (68.) 869 (73.6) 20 (82.7) 233 (9.8) 3 (44.5) 0 (.8) 53 (.9) 669 (26.3) 0 (35.4) ø8.0 (0.7) 69 (2.7) 542 (2.3) 43 (.7) No. Description Power wiring conduit plates. 2 Control wiring conduit plates. 3 Shown with optional hood (catalog number -7-HOOD- F8). If hood is not used, allow sufficient top clearance for proper airflow. See page 89. 4 Optional HIM. 5 Option bay disconnect switch access door. 6 Interlock override switch. 24 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 9 MCC Style Cabinet, 0 mm (3.5 in.) Deep IP, NEMA/UL Type Enclosure Code L (AC Input) Enclosure Codes P, W (DC Input) 4 (7.3) 2 4 (7.3) 2 (.6) 2 76 (3.0) 27 (5.0) (47.2) 27 (5.0) 2 (9.4) 0 (3.5) 3 4 4 2453 (96.6) 5 20 (.6) 862 (73.3) 464 (57.6) 27 (5.0) 76 (3.0) 2 2 76 (3.0) ø8.0 (0.7) No. Description Power wiring conduit plates. 292 (.5) 4 (7.3) 4 (7.3) 742 (29.2) 2 Control wiring conduit plates. 3 Shown with optional hood (catalog number -7-HOOD-F8). If hood is not used, allow sufficient top clearance for proper airflow. See page 89. 3 (44.5) 0 (35.4) 669 (26.3) 53 (.9) 0 (.8) 69 (2.7) 43 (.7) 4 Disconnect switches - Common DC Input drives. 5 Optional HIM. Rockwell Automation Publication 7-TD00K-EN-P - October 7 25

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 9 MCC Style Cabinet with Wiring Bay, 0 mm (3.5 in.) Deep IP, NEMA/UL Type Enclosure Code L (AC Input) Enclosure Codes P, W (DC Input) 268 (.5) 4 (7.3) 4 (7.3) 4 (7.3) 266 (.5) 266 (.5) 78 (3.) 2 2 27 (5.0) 27 (5.0) 0 (.9) 2 (9.4) 0 (3.5) 3 2453 (96.6) 4 20 (.6) 464 (57.6) 27 (5.0) 76 (3.0) 76 (3.0) 0 (7.9) ø8.0 (0.7) No. Description Power wiring conduit plates. 2 (.6) 4 (7.3) 4 (7.3) 2 (.6) 4 (7.3) 742 (29.2) 2 Control wiring conduit plates. 3 Shown with optional hood (catalog number -7-HOOD-F8). If hood is not used, allow sufficient top clearance for proper airflow. See page 89. 0 (35.4) 3 (44.5) 269 (.0) (59.) 73 (68.) 0 (.8) 53 (.9) 669 (26.3) 43 69 (.7) (2.7) 4 Optional HIM. 26 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 9 MCC Style Cabinet with Cabinet Option Bay, 0 mm (3.5 in.) Deep IP, NEMA/UL Type Enclosure Code L (AC Input) Enclosure Codes P, W (DC Input) 78 (3.) 2 (.6) 4 (7.3) 4 (7.3) 4 (7.3) 2 (.6) 2 2 27 (5.0) 27 (5.0) 0 (.9) 2 (9.4) 0 (3.5) 3 2453 (96.6) 4 5 20 (.6) 6 464 (57.6) 76 (3.0) 76 (3.0) ø8.0 (0.7) 27 (5.0) 292 (.5) 2 2 4 (7.3) 269 (.0) (59.) 73 (68.) 292 (.5) 4 (7.3) 3 (44.5) 0 (7.9) 4 (7.3) 0 (.8) 53 (.9) 669 (26.3) 0 (35.4) 69 (2.7) 742 (29.2) 43 (.7) No. Description Power wiring conduit plates. 2 Control wiring conduit plates. 3 Shown with optional hood (catalog number -7-HOOD-F8). If hood is not used, allow sufficient top clearance for proper airflow. See page 89. 4 Optional HIM. 5 Interlock override switch. Rockwell Automation Publication 7-TD00K-EN-P - October 7 27

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 9 MCC Style Cabinet with Cabinet Option Bay and Wiring Bay, 0 mm (3.5 in.) Deep IP, NEMA/UL Type Enclosure Code L (AC Input) Enclosure Codes P, W (DC Input) 268 (.5) 78 (3.) 4 (7.3) 4 (7.3) 4 (7.3) 4 (7.3) 2 2 27 (5.0) 27 (5.0) (94.5) 3 266 (.5) 266 (.5) 2 (9.4) 0 (3.5) 2453 (96.6) 4 5 20 (.6) 6 464 (57.6) 76 (3.0) 76 (3.0) ø8.0 (0.7) 27 (5.0) 2 2 0 (7.9) 4 (5.6) 4 (7.3) 4 (7.3) 4 (7.3) 4 (7.3) 2 (.6) 0 (.8) 53 (.9) 669 (26.3) 0 (35.4) 3 (44.5) 269 (.0) (59.) 73 (68.) 869 (73.6) 20 (82.7) 233 (9.8) 69 (2.7) 742 (29.2) 43 (.7) No. Description Power wiring conduit plates. 2 Control wiring conduit plates. 3 Shown with optional hood (catalog number -7-HOOD-F8). If hood is not used, allow sufficient top clearance for proper airflow. See page 89. 4 Optional HIM. 5 Option bay disconnect switch access door. 6 Interlock override switch. 28 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 9 MCC Style Cabinet, 0 mm (3.5 in.) Deep IP54, NEMA 2 Enclosure Codes K, Y (DC Input) IP54, UL Type 2 Enclosure Code J (AC Input) 2 2 76 (3.0) 27 (5.0) (47.2) 27 (5.0) 2 (9.4) 898 (35.4) 0 (3.5) 2477 (97.5) 20 (.6) 464 (57.6) 3 547 (2.5) 6 (26.8) 27 (5.0) 292 (.5) 4 (7.3) 76 (3.0) 76 (3.0) 2 2 4 (7.3) ø8.0 (0.7) 742 (29.2) No. Description Power wiring conduit plates. 2 Control wiring conduit plates. 3 Optional HIM. 0 (.8) 53 (.9) 669 (26.3) 0 (35.4) 3 (44.5) 69 (2.7) 43 (.7) Rockwell Automation Publication 7-TD00K-EN-P - October 7 29

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 9 MCC Style Cabinet with Wiring Bay, 0 mm (3.5 in.) Deep IP54, NEMA 2 Enclosure Codes K, Y IP54, UL Type 2 Enclosure Code J 78 (3.) 2 2 27 (5.0) 27 (5.0) 0 (.9) 4 (8.9) 3 (2.2) 3 (2.2) 244 (9.6) 9 (35.8) 0 (3.5) 2477 (97.5) 3 20 (.6) 464 (57.6) 556 (2.9) 675 (26.6) 556 (2.9) 76 (3.0) 76 (3.0) ø8.0 (0.7) 24 (.0) 27 (5.0) 2 2 2 0 (7.9) 2 (.6) 4 (7.3) 4 (7.3) 4 (7.3) 742 (29.2) No. Description Power wiring conduit plates. 269 (.0) (59.) 73 (68.) 3 (44.5) 0 (.8) 53 (.9) 669 (26.3) 0 (35.4) 69 (2.7) 43 (.7) 2 Control wiring conduit plates. 3 Optional HIM. Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 9 MCC Style Cabinet with Cabinet Option Bay, 0 mm (3.5 in.) Deep IP54, NEMA 2 Enclosure Codes K, Y IP54, UL Type 2 Enclosure Code J 78 (3.) 2 27 (5.0) 27 (5.0) 27 (5.0) 0 (.9) 2 4 (8.9) 2 3 (2.2) 244 (9.6) 0 (3.5) 2477 (97.5) 3 4 20 (.6) 5 464 (57.6) 556 (2.9) 675 (26.6) 556 (2.9) 76 (3.0) 76 (3.0) 76 (3.0) ø8.0 (0.7) 24 (.0) 27 (5.0) 2 2 2 2 (.6) 4 (7.3) 269 (.0) (59.) 73 (68.) 4 (7.3) 3 (44.5) 4 (7.3) 0 (.8) 53 (.9) 669 (26.3) 0 (35.4) 69 (2.7) 742 (29.2) 43 (.7) No. Description Power wiring conduit plates. 2 Control wiring conduit plates. 3 Optional HIM. 4 Option bay disconnect switch access door. 5 Interlock override switch. Rockwell Automation Publication 7-TD00K-EN-P - October 7 3

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 9 MCC Style Cabinet with Cabinet Option Bay and Wiring Bay, 0 mm (3.5 in.) Deep IP54, NEMA 2 Enclosure Codes K, Y IP54, UL Type 2 Enclosure Code J 78 (3.) 2 2 4 (8.9) 4 (8.9) 2 3 (2.2) 3 (2.2) 27 (5.0) 27 (5.0) 27 (5.0) (94.5) 244 (9.6) 0 (3.5) 2477 (97.5) 20 (.6) 464 (57.6) 3 4 5 556 (2.9) 675 (26.6) 556 (2.9) 27 (5.0) 76 (3.0) 76 (3.0) 76 (3.0) 2 2 2 2 0 (7.9) 24 ø8.0 (.0) (0.7) 2 (.6) 4 (7.3) 4 (7.3) 4 (7.3) 269 (.0) (59.) 73 (68.) 869 (73.6) 20 (82.7) 233 (9.8) 3 (44.5) 2 (.6) 4 (7.3) 0 (.8) 53 (.9) 669 (26.3) 0 (35.4) 69 (2.7) 742 (29.2) 43 (.7) No. Description Power wiring conduit plates. 2 Control wiring conduit plates. 3 Optional HIM. 4 Option bay disconnect switch access door. 5 Interlock override switch. 32 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 9 Open Style IP00, NEMA/UL Open Type Enclosure Code T (AC Input) 728.6 (68.05).6 (63.02) 978.8 (77.9) 666.5 (53.) 466.0 (8.35) 236.2 (9.) 472.6 (57.98) 228.3 (48.36) 0.0 (43.3) 953. (37.52) 788.0 (3.02) 623.0 (24.53) 0.0 (0.00) 777.9 (.63) 4.5 (6.56) 577.8 (62.2) 245.0 (84.45) 2.8 (83.4) 65.6 (8.32) 35.2 (.3) 9.9 (2.) 57.0 (6.8) 9.2 (4.69) 0.0 (0.00) Rockwell Automation Publication 7-TD00K-EN-P - October 7 33

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 9 Open Style IP00, NEMA/UL Open Type Enclosure Code T (DC Input) 228.3 (48.36) 0.0 (43.3) 953. (37.52) 788.0 (3.02) 623.0 (24.53) 0.0 (0.00) PE PE PE 777.9 (.63) 4.5 (6.56) TESTPOINTS DC+ DC- 577.8 (62.2) PE PE 9.9 (2.) 57.0 (6.8) 978.8 (77.9) 666.5 (53.) 466.0 (8.35) 236.2 (9.) 9.2 (4.69) 0.0 (0.00) PE TESTPOINTS DC+ DC- 245.0 (84.45) 2.8 (83.4) 35.2 (.3) 34 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) MCC Style Cabinet, 0 mm (23.6 in.) Deep IP, NEMA/UL Type Enclosure Code B 4 (7.3) 4 (7.3) 4 (7.3) 68 (2.7) 2 2 2 76 (3.0) 27 (5.0) 27 (5.0) 0 (.9) 27 (5.0) 2 (9.4) 0 (23.6) 3 3 2453 (96.6) 20 (.6) 4 464 (57.6) 76 (3.0) 76 (3.0) 76 (3.0) ø8.0 (0.7) 27 (5.0) 4 (5.6) 2 2 2 0 (9.7) 0 (9.7) 0 (9.7) 542 (2.3) 73 (68.) (59.) 269 (.0) 3 (44.5) 0 (35.4) 669 (26.3) 53 (.9) 0 (.8) 69 (2.7) 43 (.7) No. Description Power wiring conduit plates. 2 Control wiring conduit plates. 3 Shown with optional hood (catalog number -7-HOOD-F8). If hood is not used, allow sufficient top clearance for proper airflow. See page 89. 4 Optional HIM. Rockwell Automation Publication 7-TD00K-EN-P - October 7 35

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) MCC Style Cabinet, 0 mm (3.5 in.) Deep IP, NEMA/UL Type Enclosure Code L (AC Input) Enclosure Codes P, W (DC Input) 4 (7.3) 4 (7.3) 2 2 4 (7.3) 2 (.6) 2 76 (3.0) 27 (5.0) 0 (.9) 27 (5.0) 27 (5.0) 2 (9.4) 0 (3.5) 3 3 4 4 4 2453 (96.6) 5 20 (.6) 862 (73.3) 464 (57.6) 27 (5.0) 76 (3.0) 76 (3.0) 2 2 2 76 (3.0) ø8.0 (0.7) No. Description 292 (.5) 4 (7.3) 73 (68.) (59.) 269 (.) 4 (7.3) 3 (44.5) 0 (35.4) 669 (26.3) 4 (7.3) 53 (.9) 0 (.8) 69 (2.7) 742 (29.2) 43 (.7) Power wiring conduit plates. 2 Control wiring conduit plates. 3 Shown with optional hood (catalog number -7- HOOD-F8). If hood is not used, allow sufficient top clearance for proper airflow. See page 89. 4 Disconnect switches - Common DC Input drives. 5 Optional HIM. 36 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) MCC Style Cabinet 0 mm (3.5 in.) Deep IP54, NEMA 2 Enclosure Codes K, Y (DC Input) IP54, UL Type 2 Enclosure Code J (AC Input) 2 2 2 76 (3.0) 27 (5.0) 0 (.9) 27 (5.0) 27 (5.0) 2 (9.4) 898 (35.4) 0 (3.5) 2477 (97.5) 3 20 (.6) 464 (57.6) 547 (2.5) 6 (26.8) 27 (5.0) 76 (3.0) 76 (3.0) 2 2 2 76 (3.0) ø8.0 (0.7) 292 (.5) 4 (7.3) 4 (7.3) 4 (7.3) 742 (29.2) 3 (44.5) 269 (.) (59.) 73 (68.) 0 (.8) 53 (.9) 669 (26.3) 0 (35.4) 69 (2.7) 43 (.7) No. Description Power wiring conduit plates. 2 Control wiring conduit plates. 3 Optional HIM. Rockwell Automation Publication 7-TD00K-EN-P - October 7 37

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) Open Style IP00, NEMA/UL Open Type Enclosure Code T (AC Input) 978.8 (77.9) 666.5 (53.) 728.6 (68.05).6 (63.02) 472.6 (57.98) 228.3 (48.36) 0.0 (43.3) 953. (37.52) 788.0 (3.02) 623.0 (24.53) 0.0 (0.00) 777.9 (.63) 4.5 (6.56) 577.8 (62.2) 2377.9 (93.62) 245.0 (84.45) 2.8 (83.4) 65.6 (8.32) 35.2 (.3) 466.0 (8.35) 236.2 (9.) 9.2 (4.69) 0.0 (0.00) 9.9 (2.) 57.0 (6.8) 38 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) Open Style IP00, NEMA/UL Open Type Enclosure Code T (DC Input) 228.3 (48.36) 0.0 (43.3) 953. (37.52) 788.0 (3.02) 623.0 (24.53) 0.0 (0.00) PE PE PE 777.9 (.63) 4.5 (6.56) TESTPOINTS DC+ DC- 577.8 (62.2) PE 2377.9 (93.62) 978.8 (77.9) 666.5 (53.) 466.0 (8.35) 236.2 (9.) 9.2 (4.69) 0.0 (0.00) 57.0 (6.8) PE PE TESTPOINTS DC+ DC- PE PE PE TESTPOINTS DC+ DC- 245.0 (84.45) 2.8 (83.4) 35.2 (.3) 9.9 (2.) Rockwell Automation Publication 7-TD00K-EN-P - October 7 39

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 5 NEMA/UL Type Kit A Frame 4 Shown Frame A B C D 25.4 (8.48) 458.8 (8.06) 2 222.2 (8.75) 497. (9.57) 7.7 (4.63) 38.0 (.) 3 223. (8.78) 5. (.87) 54.7 (6.09) 38.0 (.) B 4 222.7 (8.77) 564.4 (22.22) 54.7 (6.09).0 (.57) 5 222.7 (8.77) 665.4 (26.) 55.0 (6.) 55.0 (2.7) IMPORTANT: NEMA Type Kits (-7-NEMA-Fx) do not change the mounting dimensions. D C 6 NEMA/UL Type Kit 8.0 (2.3) 346.7 (3.65) 945. (37.2) Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 5 NEMA/UL Type Bottom View 72. (2.84) 7.9 (2.83) 4.4 (.63) 39.7 (.56) 7.6 (6.76) 7.6 (6.76) 37.6 (5.42) 94.6 (3.72) 2x: Ø22.2 (Ø0.87) 2x: Ø29.0 (Ø.4) Frame 89.7 (3.53) 87.0 (3.43) 67.5 (2.66) 48.0 (.89) 45.3 (.78) 5x: Ø22.0 (Ø0.87) 95.0 (3.74) 65.0 (2.56).0 (2.36).0 (5.2) 25.0 (4.92) 5x: Ø22.2 (Ø0.87) 7.6 (6.76) 37.6 (5.42) 94.6 (3.72) 2x: Ø29.0 (Ø.4) 68.7 (6.64) 56.7 (6.7) 8.7 (4.67) 2x: Ø43.7 (Ø.72) Frame 2 Frame 3.8 (4.36) 76.8 (3.02) 62.8 (2.47) 58.8 (6.25) 44.8 (5.) 5x: Ø22.2 (Ø0.87).0 (3.54) 69.0 (2.72).0 (7.9).0 (7.09) 35.0 (5.3) 5x: Ø22.2 (Ø0.87) 87.0 (7.36) 68.7 (6.64) 8.7 (4.67) 2x: Ø43.7 (Ø.72) 87.0 (7.36) 73.0 (6.8) 23.0 (4.84) 2x: Ø.0 (Ø.97) Frame 4 Frame 5 Rockwell Automation Publication 7-TD00K-EN-P - October 7 4

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) 7 EMC Plate and Cores Kit A Frame 4 Shown C B Frame 6 Shown (Kit Only) E D F Enclosures are shown without venting. Supplied enclosures have proper venting. Frame A B C D E F.0 (4.33) 478.8 (8.85) 0.5 (5.77) 78.3 (3.08) 37.4 (.47) 73.4 (2.89) 2 34.5 (5.) 485.9 (9.3) 424.2 (6.) 6.7 (2.43) 43.5 (.7) 79.5 (3.3) 3.0 (7.48) 54.0 (.24) 454.0 (7.87).0 (2.36) 74.0 (2.9) 6.0 (4.57) 4 222.0 (8.74) 533.7 (2.0) 474.0 (8.66) 59.7 (2.35) 84.0 (3.3) 38.0 (5.43) 5 2.0 (.63) 9.7 (24.00) 5.0 (2.65) 59.7 (2.35) 77.8 (3.06) 9.8 (7.55) IMPORTANT: EMC Kits (-7-EMCx-Fx) do not change the mounting dimensions. See the PowerFlex 7-Series EMC Plate and Cores Installation Instructions, publication 7-IN006, for detailed information on kit installation. 42 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) Power Option Cabinet 0 mm and 0 mm Wide Width A F D F B Height F E C Cat. No. Height Width Depth A B C D E F -7-PBAY-66 2265.5 (89.2) 0 (23.6) 0 (23.6) 5 (.5) 25.5 (86.8) 447.7 (7.6) 963.7 (77.3) 3.5 (5.4) 3.3 (23.8) -7-PBAY-68 2265.5 (89.2) 0 (23.6) 0 (3.5) 5 (.5) 25.5 (86.8) 447.7 (7.6) 963.7 (77.3) 3.5 (5.4) 3.3 (23.8) -7-PBAY-86 2265.5 (89.2) 0 (3.5) 0 (23.6) 7 (28.3) 25.5 (86.8) 647.7 (25.5) 963.7 (77.3) 5.5 (23.2) 3.3 (23.8) -7-PBAY-88 2265.5 (89.2) 0 (3.5) 0 (3.5) 7 (28.3) 25.5 (86.8) 647.7 (25.5) 963.7 (77.3) 5.5 (23.2) 3.3 (23.8) See the PowerFlex 7-Series Power Option Cabinets Installation Instructions, publication 7-IN0, for details. Rockwell Automation Publication 7-TD00K-EN-P - October 7 43

PowerFlex 7-Series AC Drives Frame Type Approximate Dimensions mm (in.) Power Option Cabinet mm Wide Width A F D F F B Height F E C Cat. No. Height Width Depth A B C D E F -7-PBAY-26 2265.5 (89.2) (47.2) 0 (23.6) (44.) 25.5 (86.8) 42.3 (4.0) 963.7 (77.3) 978. (38.5) 452.5 (7.8) -7-PBAY-28 2265.5 (89.2) (47.2) 0 (3.5) (44.) 25.5 (86.8) 42.3 (4.0) 963.7 (77.3) 978. (38.5) 452.5 (7.8) See the PowerFlex 7-Series Power Option Cabinets Installation Instructions, publication 7-IN0, for details. 44 Rockwell Automation Publication 7-TD00K-EN-P - October 7

PowerFlex 7-Series AC Drives Drive Options This section provides information for the drive options. Human Interface Modules This section provides information for the human interface modules. Blank Plate -HIM-A6 -HIM-C6S Cat. No. Description -HIM-A0 No HIM (blank plate) -HIM-A6 Enhanced, LCD, full numeric, handheld/local, NEMA Type -HIM-C6S Enhanced, LCD, full numeric, IP66 NEMA Type 4X/2 (for indoor use only) () () Includes a 3 m (9.8 ft) catalog number 2-C interface cable for connection to drive. Human Interface Modules Specifications Attribute -HIM-A6 () Drive Protocol Data rates Consumption Drive (DPI) Dimensions, H x W x D -HIM-A6 -HIM-C6S Drive Peripheral Interface (DPI ) 25 Kbps or 0 Kbps ma at 2V DC supplied by the host drive 6 x x 6 mm (4.57 x 2.75 x 0.63 in.) x 93 x 25 mm (7.08 x 3.66 x 0.98 in.) -HIM-C6S () Weight 9 g (3.2 oz) 73 g (5.7 oz) Temperature Operating Storage Relative humidity Atmosphere UV radiation Vibration Operating Nonoperating Shock Operating Nonoperating UL c-ul CE C-Tick FCC ID IC 0 C (32 22 F) - +85 C (- +85 F) 5 95% noncondensing IMPORTANT: Do not install the module in an area where the ambient atmosphere contains volatile or corrosive gas, vapors, or dust. If the module is not going to be installed right away, store the module in an area where it is not exposed to a corrosive atmosphere. The HIM is not UV rated. 2.5 G at 5 00 Hz 5 G at 5 00 Hz G peak acceleration, (±) ms pulse width G peak acceleration, (±) ms pulse width UL8C CAN / CSA C22.2 No. 4 EN60-3 EN60-3 () IMPORTANT: These HIMs are a product of category C2 according to IEC 60-3. In a domestic environment, this product can cause radio interference in which case supplementary mitigation measures can be required. Rockwell Automation Publication 7-TD00K-EN-P - October 7 45