features / series warranty warranty Innovative housing (double enclosure) Cutting oils resistant (for machines tool) Immersion proof (sealing IP 67/68) High frequency switching Complementary output (NO+NC), M2 plug cable exit ATEX models, cat. 3, available on request LED indicator visible at wide angle Complete protection against electrical damages web contents Application notes Photos Catalogue / Manuals code description (*) series output state output logic distance connect. PMS PKS PMW PKW 0 N P 2 H M2 inductive proximity sensors (IP 67/68) brass housing M8 inductive proximity sensors (IP 67/68) brass housing M2 inductive proximity sensors (IP 67/68) stainless steel housing M8 inductive proximity sensors (IP 67/68) stainless steel housing NO+NC complementary output NPN logic output PNP logic output Standard shielded (2/5 mm) Standard unshielded (4/8 mm) M2 plug cable exit (*) ATEX models available, contact our Sales Dept. for further information. PMS / 0 N - H available models diameter housing installation distance (mm) plug NPN/NO+NC PNP/NO+NC M2 nickel plated brass stainless steel shielded 2 PMS/0N-H PMS/0P-H unshielded 4 PMS/0N-2H PMS/0P-2H M2 shielded 2 PMW/0N-H PMW/0P-H unshielded 4 PMW/0N-2H PMW/0P-2H 43
available models diameter housing installation distance (mm) M8 nickel plated brass stainless steel technical specification shielded 5 plug NO+NC NO+NC PKS/0N-H PKS/0P-H unshielded 8 PKS/0N-2H PKS/0P-2H M2 shielded 5 PKW/0N-H PKW/0P-H unshielded 8 PKW/0N-2H PKW/0P-2H PM*/0*-H PM*/0*-2H nominal sensing distance operating distance hysteresis repeatibility operating voltage max ripple content no-load supply current load current leakage current voltage drop output type switching frequency power on delay power supply protections output protection temperature range temperature drift EMC shocks and vibrations protection degree LEDs housing material active head material tightening torque weight (approximate) 2 mm 4 mm 0...62 mm 0...3.24 mm...20% 5% 0...30 Vdc 0% 5 ma 00 ma 0 μa 2 V@00 ma NPN or PNP - NO + NC 2 khz 50 ms polarity reversal, transient short circuit (autoreset) -25...+70 C 0% Sr in conformity with the EMC Directive according to IEC 60947-5-2 IEC 60947-5-2 IEC IP 67/68 () yellow LED (NO output energized) nickel-plated brass (PMS) stainless steel AISI303 (PMW) PPS 8 Nm 35 g () Only in fully locked position with its splug. Notes: good chemicals and oils resistance, but test should be made in advance when using in harsh environment. 44
technical specification nominal sensing distance operating distance hysteresis repeatibility operating voltage max ripple content no-load supply current load current leakage current voltage drop output type switching frequency power on delay power supply protections output protection temperature range temperature drift EMC shocks and vibrations protection degree (DIN 40 050) LEDs housing materials active head materials tightening torque weight (approximate) PK*/0*-H PK*/0*-2H 5 mm 8 mm 0...4.05 mm 0...6.48 mm...20% 5% 0...30 Vdc 0% 5 ma 400 ma 0 μa 2 V@200 ma NPN or PNP - NO + NC.5 khz 50 ms polarity reversal, transient short circuit (autoreset) -25...+70 C 0% Sr in conformity with the EMC Directive according to IEC 60947-5-2 IEC 60947-5-2 IEC IP 67/68 () yellow (NO output energized) nickel-plated brass (PKS) stainless steel AISI303 (PKW) PPS 50 Nm 50 g PKS - 55 g PKW () Only in fully locked position withit splugs. Notes: good chemicals and oils resistance, but test should be made in advance when using in harsh environment correction factors code steelfe 360 copper alluminium brass stainless steel PMS/**-* 0.22 0.3 0.4 0.77 PMS/**-2* 0.4 0.47 0.56.5 PMW/**-* 0.02 0,08 0.2 0.68 PMW/**-2* 0.34 0,4 0.5 0.88 PKS/**-* 0.3 0.35 0.65 0.76 PKS/**-2* 0.38 0.48 0.5 0.7 PKW/**-* 0.2 0.2 0.26 0.62 PKW/**-2* 0.3 0.37 0.46 0.78 45
electrical diagrams of connections PNP + 4 = NO 2 = NC 2 = NC 4 = NO 3-3 The max. admissible capacity C = μf for max. output voltage and current. NPN + - BN BU BK WH brown blue black white plug M2 NO/NC (OUT NO) (-) 4 3 2 (+) (OUT NC) Connectors CD series installation code D4 D D2 D3 PMS/**-* 0 mm 6 mm 2 mm 6 mm D D D2 35 n D3 PMS/**-2*.2 mm 2 mm 24 mm 2 mm PMW/**-* 0 mm () 6 mm 2 mm 6 mm PMW/**-2* 6 mm (2) 2 mm 24 mm 2 mm PKS/**-* 3 mm 9 mm 8 mm 5 mm PKS/**-2* 2 mm 8 mm 36 mm 24 mm D4 PKW/**-* 3.6 mm 9 mm 8 mm 5 mm PKW/**-2* 2 mm 8 mm 36 mm 24 mm () 2.4 for non magnetic material (2) 0 mm for non magnetic material 46
response diagram PMS*/**-* parallel displacement - - - 0, 0,4! 0,6! 0,8!,,4!,6!,8! d (mm) d [mm]! PMS*/**-2* parallel displacement 5! 4! - - - -4! -5! 0, 0,4!0,6! 0,8!,,4!,6!,8! 2, 2,4!2,6! 2,8! 3, 3,4!3,6! 3,8! 4! d (mm) d [mm]! PK*/**-* parallel displacement PK*/**-2* parallel displacement 6! 5! 4! - - - -4! -5! -6! 4! 5! d (mm) d [mm]! 8! 7! 6! 5! 4! - - - -4! -5! -6! -7! -8! 4! 5! 6! 7! 8! d (mm) d [mm]! dimensions (mm) PM*/**-H PM*/**-2H.9 9 X X 0.8 0.8 64.6 46.7 64.6 52.7 38.5 ø 3 32.5 6 ø 3 LED 47
dimensions (mm) accessories included dimensions (mm) 4 metallic nut (2 x) PK*/**-H PK*/**-2H ø 0.5 ø 0.5 3 3 62.8 5.5 34.3 X ø 4 9 63 5.5 26.5 8 X ø 4 9 M8 x M8 x LED dimensions (mm) accessories included in all M8 models CH, 24 M8 X 4 metallic nut (2 x) 48