CONTENTS LUGGAGE SYSTEMS NAVIGATION & POWER SUPPLY SAFETY MAINTENANCE ERGONOMICS STYLE MEETS FUNCTION CONTENTS.

CONTENTS LUGGAGE SYSTEMS LEGEND GEAR........................ 4 Tail bags........................... 6 Saddlebags & side bags............ 8 Saddle strap, side carrier........... 10 Tank bags.......................... 11 Accessory bags..................... 12 Shoulder strap, tank strap......... 13 SADDLEBAGS DAKAR panniers set................ 14 BLAZE panniers set............... 15 CASE SYSTEMS TRAX ADVENTURE ALU-BOX......... 16 TraX EVO ALU-BOX................ 18 ALU-BOX accessories............... 20 ALU-BOX camping accessories..... 21 AERO ABS side case set............ 22 T-RaY topcase...................... 23 SIDE CARRIERS & LUGGAGE RACKS (QUICK-LOCK / QUICK-LOCK EVO INSIDE) QUICK-LOCK EVO side carrier....... 24 ALU-RACK.......................... 25 SEAT-RACK......................... 26 STEEL RACK, ALU-RACK luggage rack extension..................... 27 TANK RINGS & TANK BAGS QUICK-LOCK EVO INSIDE Tank ring........................... 28 Electric tank ring................... 29 Tank bags.......................... 30 QUICK-LOCK INSIDE Tank ring........................... 32 ION tank bags...................... 33 Strap tank bags.................... 34 Tank bag accessories............... 35 TAIL BAGS........................... 36 WATERPROOF LINE Tail bag............................. 38 Tail bag, Drypacks................... 40 SAFETY LINE: Backpack, tail bags................. 41 BACKPACKS......................... 42 NAVIGATION & POWER SUPPLY GPS MOUNTS & ACCESSORIES Universal GPS mount kits........... 44 Navi Case Pro, GPS clip adapter..... 45 QUICK-LOCK GPS mounts (motorcycle model specific)........ 46 Nonshock bar clamp GPS mount (universal).......................... 47 Device mount system............... 48 Smartphone hard cases............. 49 COCKPIT POWER SUPPLY Universal electric kit............... 50 Electric motorbike adapters........ 51 ERGONOMICS BAR POSITIONING Universal bar risers/barbacks....... 52 Bar risers/barbacks (motorcycle model specific)........ 53 Bar converters...................... 54 Vario barback, Vario barback converters............ 55 Gear levers......................... 56 Footrests........................... 57 SAFETY Mirror extensions................... 58 Handguards......................... 60 Crash bars.......................... 62 Frame/axle slider kits............... 63 Engine guards....................... 64 Radiator guards, chain guards...... 65 Auxiliary lights & accessories....... 66 MAINTENANCE Centerstands....................... 68 STYLE MEETS FUNCTION Customizing accessories............ 70 www.motorradreisender.de IMPRINT Best of 2016 2016 SW-MOTECH, Rauschenberg, Germany Technical illustrations: Christian Geil Printed by: flyeralarm GmbH, Würzburg Errors and omissions excepted. Technical and design modifications are subject to change. Editor: Johannes Klotz, Pamela Stephens Layout & typesetting: Petra Köster Photography: Daniel Keller (SW-MOTECH), Alex Chacon (p. 30/31), Nick Johnson (title), Erik Peters (p. 2/3) This brochure only shows an extract of our product range. For further information please visit our website: www.sw-motech.com 2 SW-MOTECH 2016 CONTENTS BEST OF 2016 3

++ NEW PRODUCT LINE ++ One for the road State-of-the-art materials with a classic style: The Legend Gear luggage line combines an ageless retro design with choice materials and a versatile fastening system. A combination of coated canvas sailing material with robust Napalon synthetic leather supports the vintage design with the toughness needed for daily use on the road. www.legend-gear.com

Tail Bag LR1 This convenient combination of tail bag and fully fledged backpack recommends itself as a versatile companion for any tour no matter whether by bike or on foot. Material: Napalon synthetic leather & coated canvas, PU inner lining Dimensions: 30 x 17 x 40 cm (w/h/d) Capacity: 17.5 l > Universal fit for bench seat and rack > 4 point strap mounting > Backpack function > Slide-in carrying straps > Fastenings for accessory bags Art.No.: BC.HTA.00.404.10000 Tail Bag LR2 The 48 liter tail bag LR2 comes with lots of stowage space for extended trips. The mounting system offers additional mounting of accessory bags while four fastening straps secure the bag on the seat or rear rack. > Universal fit for most motorcycle models > Can be used on bikes with overhead exhaust pipes > Anti-skid bottom > Fastenings for accessory bags Art.No.: BC.HTA.00.405.10000 Material: Napalon synthetic leather & coated canvas, PU inner lining Dimensions: 68 x 45 x 30 cm (w/h/d) Capacity: 48 l 6 SW-MOTECH 2016 LUGGAGE SYSTEMS 7 LEGEND GEAR

Saddlebag LS1/LS2 A taste of vintage: Legend Gear saddlebags LS1 and LS2 will face every trip with ease and can be fastened to the versatile saddle strap SLS. > Available in two sizes (9.8 l/13.5 l) > Waterproof inner bags Art.No.: BC.HTA.00.401.10000 ( LS1 ) BC.HTA.00.402.10000 ( LS2 ) Side Bag LC1/LC2 Plays well with steel: The side bags LC1 and LC2 are equipped with a convenient quick release fastening system for Legend Gear steel side carriers SLC. > Quick-release fastenings for side carrier SLC > Available in two sizes (9.8 l/13.5 l) > Waterproof inner bags Art.No.: BC.HTA.00.401.10100L ( LC1, left side ) BC.HTA.00.402.10100L ( LC2, left side ) BC.HTA.00.401.10100R ( LC1, right side ) BC.HTA.00.402.10100R ( LC2, right side ) Saddlebag LS1/LS2 Material: Napalon synthetic leather & coated canvas, PU inner lining Dimensions: 14 x 26 x 31 / 14 x 35 x 31 cm (w/h/d) Capacity: 9.8 / 13.5 l Side Bag LC1/LC2 Material: Napalon synthetic leather & coated canvas, PU inner lining Dimensions: 14 x 26 x 31 / 14 x 35 x 31 cm (w/h/d) Capacity: 9.8 / 13.5 l 8 SW-MOTECH 2016 LUGGAGE SYSTEMS 9 LEGEND GEAR

Saddle Strap SLS Tank Bag LT1 Material: Napalon synthetic leather Dimensions: 39 x 21 cm (w/d) Saddle strap SLS provides safe mount of saddlebags LS1 and LS2 to standard seats with passenger seat. > Bags can be attached in different heights > Circumferential mounting strap provides safe fit > Fastenings for accessory bags Art.No.: BC.HTA.00.403.10000 Powerful magnets provide secure mounting for the tank bag LT1 even on rough roads. Due to its base the tank bag can be easily removed in seconds. > Fits most steel gas tanks > Soft foam base > Zippered capacity expansion > Front cable feed-through > Robust carrying handle > Rain cover > Fastenings for accessory bags Art.No.: BC.TRS.00.401.10000 Dimensions: 18 x 10 x 25 cm (w/h/d) Capacity: 3.0-5.5 l Side Carrier SLC Tank Bag LT2 The custom-fit bike-specific side carrier allows easy and safe mounting on original mounting points to the bike. Even the quick lock system provides fast attach/detach fitting. The carrier mount is exceedingly reliable. > Carrier for side bag LC1/LC2 > Can be installed on both sides or one side only > Compatible with side bag quick lock system Material: Napalon synthetic leather & coated canvas, PU inner lining Dimensions: 15 x 18 x 30 cm (w/h/d) Capacity: 5.5 l Back to the roots: This compact strap-on tank bag LT2 attaches to the bike by classic strap mounting. Two clip buckles guarantee fast access to the gas cap. No additional cut outs necessary. > Overlapping lid offers protection against moisture and dirt > Front cable feed-through > Robust carrying handle > Rain cover > Fastenings for accessory bags Art.No.: BC.TRS.00.402.10000 10 SW-MOTECH 2016 LUGGAGE SYSTEMS 11 LEGEND GEAR

Accessory Bags Shoulder Strap LA4 LA1 LA2 The accessory bags can be fastened to almost all Legend Gear products. A perfect mix of design and function matches all Legend Gear products. > Can be attached to Legend Gear tail bags, saddlebags and tank bags > Also compatible with saddle strap SLS and tank strap SLA > Military grade fastening system > Rain cover included in delivery Art.No.: BC.TRS.00.403.10000 ( LA1 ) BC.TRS.00.404.10000 ( LA2 ) BC.TRS.00.405.10000 ( LA3 ) Material: Napalon synthetic leather Dimensions: 3.8 x 150 (90) cm (w/l) Tank Strap SLA The Legend Gear tank strap is meticulously tailored to each motorcycle model. This way the vintage style tank strap achieves a safe fit and can perfectly complement the motorcycle s stock design. Carrying strap for Legend Gear tail bags, saddle/side-bags and tank bags. > Shoulder padding > Aluminum retaining hooks > Adjustable length from 90 to 150 cm Art.No.: BC.TRS.00.406.10000 LA3 Accessory Bag LA1/LA2/LA3 Material: Napalon synthetic leather & coated canvas, PU inner lining Dimensions: 12 x 6 x 18 cm / 15 x 5 x 18 cm / 9.4 x 2 x 18 cm (w/h/d) Capacity: 0.8 l / 1.2 l (LA1/LA2) > Motorcycle model specific design provides a perfect fit > Can also be used to hold Legend Gear accessory bag LA1/LA2/LA3 Material: Napalon synthetic leather Width: 10.5 cm 12 SW-MOTECH 2016 LUGGAGE SYSTEMS 13 LEGEND GEAR

DAKAR panniers set DAKAR panniers are built for durability: The sturdy side bags and waterproof inner bags are suited for any environment and weather. DAKAR panniers are available with a motorcycle model specific support arm or in a version with strap fittings that can be mounted on nearly all current side carrier systems. > Material: 1680D ballistic nylon > Capacity: 2 x 32 l > Waterproof inner bags (1) Motorcycle model specific version with support arm The lightweight and robust BLAZE panniers perfectly integrate into a street or sport motorcycle s styling. At the same time the makes mounting and removal of the panniers just a matter of seconds. compact saddlebags QUICK-LOCK fastening system provides a perfect fit and safe support for best driving quality possible, even when riding at high speeds. A locking slider > Material: 1680D ballistic nylon > Capacity: 14-21 l each bag > Zippered volume expansion (2) Universal version with velcro strap fittings Art.No.: BC.HTA.00.741.11000/B BLAZE panniers set > Inner bags included in delivery > Removable QUICK-LOCK support arm Handle Velcro 1 Safety belt Support arm QUICK-LOCK locking slider 2 14 SW-MOTECH 2016 LUGGAGE SYSTEMS 15 SADDLEBAGS

TRAX ADVENTURE ALU-BOX Built without compromise: TRAX ADVEN- TURE touring cases offer durability, seal tightness against water and dust and easy handling. The tough aluminum cases accept any challenge from a rough country ride to a relaxed road cruise. Adapters for case mounting are available for SW-MOTECH QUICK-LOCK system and carriers from Givi and Hepco & Becker. > Material: Aluminum with a wall thickness of 1.5 mm > Anodized or powder coated surface (silver/ black version) > Capacity: 37, 38 or 45 l per case > Sealed against water and dust > Welded case body > Embossed designs add to wall stability > Fiber glass reinforced corners 2 > Completely removable lid with quickrelease fastening > Lid restricting rope > Tie-down points for additional luggage Please note: Carrier, adapters and locks sold separately; also available as a set. (1) Strap loop (2) Embossed pattern lines add to case stability (3) Punch-riveted waterproof corner caps (4) Chamfer for optimal lean angle (5) Sturdy aluminum handle (6) Quick-release fastener for removable lid (7) Anodizing (silver version) provides protection against moisture and aluminum residue 1 5 7 6 TRAX ADV ALU-BOX M (37 l) PRODUCT INFORMATION ARTICLE NUMBER TRAX ADV ALU-BOX M 37 l. Left. Black. Powder coated. ALK.00.733.11000L/B 49 x 23 x 37 cm. 5.1 kg. TRAX ADV ALU-BOX M 37 l. Left. Silver. Anodized. ALK.00.733.11000L/S 49 x 23 x 37 cm. 5.1 kg. TRAX ADV ALU-BOX M 37 l. Right. Black. Powder coated. ALK.00.733.11000R/B 49 x 23 x 37 cm. 5.1 kg. TRAX ADV ALU-BOX M 37 l. Right. Silver. Anodized. ALK.00.733.11000R/S 49 x 23 x 37 cm. 5.1 kg. TRAX ADV ALU-BOX L 45 l. Left. Black. Powder coated. ALK.00.733.10000L/B 49 x 28 x 37 cm. 5.5 kg. TRAX ADV ALU-BOX L 45 l. Left. Silver. Anodized. ALK.00.733.10000L/S 49 x 28 x 37 cm. 5.4 kg. TRAX ADV ALU-BOX L 45 l. Right. Black. Powder coated. ALK.00.733.10000R/B 49 x 28 x 37 cm. 5.5 kg. TRAX ADV ALU-BOX L 45 l. Right. Silver. Anodized. ALK.00.733.10000R/S 49 x 28 x 37 cm. 5.4 kg. TRAX ADV ALU-BOX 38 l. Black. Powder coated. ALK.00.733.15000/B Topcase 1 41 x 34 x 33 cm. 4.7 kg. TRAX ADV ALU-BOX Topcase 1 TRAX ADV ALU-BOX L (45 l) 38 l. Silver. Anodized. 41 x 34 cm x 33 cm. 4.7 kg. TRAX ADV ALU-BOX Topcase (38 l) ALK.00.733.15000/S 4 3 16 SW-MOTECH 2016 LUGGAGE SYSTEMS 17 CASE SYSTEMS

TraX EVO ALU-BOX With a weight of only 4.4 kilograms at a capacity of 37 liters, TraX EVO is the lightest motorcycle aluminum case available. Its robust walls and the deep-drawn lid provide the stability to cut a fine figure on and off the road alike, while the attractively priced cases are lightweight enough to be used on shorter trips. > Material: Aluminum with a wall thickness of 1.5 mm > Surface anodized or untreated aluminum > Capacity: 37, 38 or 45 l per case > Heavy-duty hinges with angle stop > Stainless steel latches > 4 tie-down points Please note: Carrier, adapters and locks sold separately; also available as a set of side cases with carriers and accessories at a highly competitive price point. For mounting TraX EVO cases to the carrier, adapters are available for SW-MOTECH s versatile QUICK-LOCK system as well as for carriers made by Givi and Hepco & Becker. PRODUCT INFORMATION ARTICLE NUMBER TraX EVO ALU-BOX M 37 l. Left. Black. Powder coated. ALK.00.165.11000L/B 49 x 23 x 37 cm. 4.4 kg. TraX EVO ALU-BOX M 37 l. Left. Silver. 49 x 23 x 37 cm. 4.4 kg. ALK.00.165.11000L/S TraX EVO ALU-BOX M 37 l. Rechts. Black. Powder coated. ALK.00.165.11000R/B 49 x 23 x 37 cm. 4.4 kg. TraX EVO ALU-BOX M 37 l. Rechts. Silver. 49 x 23 x 37 cm. 4.4 kg. ALK.00.165.11000R/S TraX EVO ALU-BOX L 45 l. Left. Black. Powder coated. ALK.00.165.10000L/B 49 x 28 x 37 cm. 4.7 kg. TraX EVO ALU-BOX L 45 l. Left. Silver. 49 x 28 x 37 cm. 4.7 kg. ALK.00.165.10000L/S TraX EVO ALU-BOX L 45 l. Rechts. Black. Powder coated. ALK.00.165.10000R/B 49 x 28 x 37 cm. 4.7 kg. TraX EVO ALU-BOX L 45 l. Rechts. Silver. 49 x 28 x 37 cm. 4.7 kg. ALK.00.165.10000R/S TraX EVO Topcase 38 l. Black. Powder coated. ALK.00.165.15000/B 1 41 x 34 x 33 cm. 4.2 kg. TraX EVO Topcase 38 l. Silver. 41 x 34 x 33 cm. 4.2 kg. ALK.00.165.15000/S 1 Top image: Deep-drawn lid with sealing profile, pierce-rivet (detail) Bottom image: Mountings for versatile QUICK-LOCK EVO carrier already installed 18 SW-MOTECH 2016 LUGGAGE SYSTEMS 19 CASE SYSTEMS

ALU-BOX accessories ALU-BOX camping gear 1 1+2 1+2 1+3 1+5 1 1-3 4 7 9 12 1+5 7+8 9+10 9+10 9+10 13 14 16 21 22 PRODUCT INFORMATION ARTICLE NUMBER 1 ALU-BOX* lock cylinder set 2 ALU-BOX* lock cylinder set 3 ALU-BOX* lock cylinder set 4 ALU-BOX* side case inner bag 5 ALU-BOX* topcase inner bag 2 matching locks with 2 keys and retaining clip 4 matching locks with 2 keys and retaining clip 6 matching locks with 2 keys and retaining clip For ALU-BOX M/L. 600D Polyester. Black. For ALU-BOX topcase. 600D Polyester. Black. ALK.00.165.16502 ALK.00.165.16402 ALK.00.165.16302 BC.ALK.00.732.10000/B BC.ALK.00.732.10300/B PRODUCT INFORMATION ARTICLE NUMBER 12 TRAX ADV topcase lid net 13 TRAX ADV expansion bag For TRAX ADV topcase. Black. For TRAX ADV M/L. Waterproof. Tarpaulin. 15 l. 14 TRAX ADV back rest For TRAX ADV topcase. EPS rigid foam. Black. 15 TraX EVO back rest For TraX EVO topcase. EPS rigid foam. Black. 16 TraX EVO carrying strap For TraX EVO M/L. Black. BC.ALK.00.732.10600/B BC.ALK.00.732.10201/B ALK.00.732.10200/B ALK.00.165.30000/B BCK.ALK.00.165.116 If you are looking for suitable gear to make a break even more enjoyable, check out our ALU-BOX camping accessories. The product line contains lightweight aluminum tables as well as drinking bottles or canisters, also available with fitting mounting kits. PRODUCT INFORMATION ARTICLE NUMBER 1 ALU-BOX* universal mount Aluminum. Silver. ALK.00.165.30900/S 2 ALU-BOX* bottle kit 1** 1 steel bottle. 0.6 l. Mounting. Silver. ALK.00.165.30700/S 3 ALU-BOX* bottle kit 2** 2 steel bottles. 0.6 l. Mounting. Silver. ALK.00.165.30800/S 4 ALU-BOX* drinking bottle 0.6 l. Steel. Silver. ALK.00.165.31000/S 5 ALU-BOX* canister kit** Plastic canister. 2 l. UN approval. Mounting. ALK.00.165.31100/B Black. 6 ALU-BOX* canister Plastic canister. 2 l. UN approval. Black. ALK.00.165.31200/B 6 ALU-BOX* Drybag M Waterproof. Tarpaulin. Black. 7 ALU-BOX* Drybag L Waterproof. Tarpaulin. Black. 8 ALU-BOX* Drybag topcase 9 TRAX ADV side case inner lid bag 10 TRAX ADV side case lid net Waterproof. Tarpaulin. Black. For TRAX ADV M/L. 600D Polyester. Black. For TRAX ADV M. Black. BCK.ALK.00.165.11000/B BCK.ALK.00.165.10000/B BCK.ALK.00.165.15000/B BC.ALK.00.732.10100/B BC.ALK.00.732.10400/B 17 TraX EVO expansion bag 18 TraX EVO contour marking 19 TraX EVO contour marking 20 TraX EVO sticker globe 21 TraX EVO sticker globe For TraX EVO M/L. 8 14 l. 600D Nylon. Black. For 2 side cases or 1 topcase. Reflective. Black. For 2 side cases or 1 topcase. Reflective. Silver. 341 x 118 mm. Weatherproof. Black. 341 x 118 mm. Weatherproof. Silver. BCK.ALK.00.165.117 ALK.00.165.30100/B ALK.00.165.30100/S LOG.00.001.10000/B LOG.00.001.10000/S 7 TRAX ADV table For TRAX ADV side cases M/L. Aluminum. Brushed. Silver. 8 TRAX ADV table legs 2 legs. For TRAX ADV table. Aluminum. Brushed. Silver. 9 TraX EVO table For TraX EVO side cases M/L. 2 table tops. Aluminum. Silver. 10 TraX EVO table legs For TraX EVO table. 2 legs. Aluminum. Silver. ALK.00.732.10000 ALK.00.732.10100 ALK.00.165.30500/S ALK.00.165.30600/S 11 TRAX ADV side case lid net For TRAX ADV L. Black. BC.ALK.00.732.10500/B 22 TraX EVO lid restricting rope 150 mm. Stainless steel. Silver. ALK.00.165.30300/B *suitable for TRAX ADVENTURE and TraX *suitable for TRAX ADVENTURE and TraX 20 EVO ALU-BOX EVO ALU-BOX **ALU-BOX universal mount (1) needed for installation SW-MOTECH 2016 LUGGAGE SYSTEMS 21 CASE SYSTEMS

AERO ABS side case set With a wall thickness of 2.5 millimeters AERO side cases combine a saddle bag s low weight with the robust construction of true touring luggage. The high quality lamination mirrors the craftsmanship that went into the making of the ABS reinforced case, while the original QUICK-LOCK carrier system provides easy luggage handling. Cases and carrier can be easily removed or attached in a few steps. > Material: ABS laminated with 600D HCF polyester > Capacity: 25 l each case > Integrated lock system > 2 zipper locks > Retractable handle > Inner bags included in delivery Art.No.: BC.HTA.00.675.11000/B Please note: QUICK-LOCK EVO side carrier and adapter needed for mounting BEST BUY Set of 2 side cases with model specific side carrier, anti-theft device and adapters Lockable zipper and lock T-RaY topcase Large storage capacity at a highly competitive price point: The splash proof T-RaY topcases come with up to 50 liters of capacity and can carry one or two helmets. With the included adapter plate the robust cases fit STEEL-RACKs and most luggage racks. The separately sold QUICK-LOCK adapter plate allows mounting on ALU-RACKs. > Capacity: 28, 36, 48 or 50 l per topcase > Splash proof sealing > Inboard locking system > Latch/lock button > Universal adapter plate for standard luggage racks included > Sizes L and XL include a custom-molded inner liner T-RaY backrest 1 2 Best buy: QUICK-LOCK adapter plate (1) for T-RaY topcase Basic/M on ALU-RACK, (2) for T-RaY topcase L/XL on ALU-RACK 1 Basic/M 2 L/XL Integrated locking system 22 SW-MOTECH 2016 LUGGAGE SYSTEMS 23 CASE SYSTEMS

QUICK-LOCK EVO side carrier ALU-RACK The most versatile side carrier available: The QUICK-LOCK EVO system combines convenient handling, perfect fit and high flexibility. Within seconds the carriers that can be adapted to hold cases from different brands* are attached or detached. Initial installation only requires mounting of a few, nearly invisible brackets to the motorcycle. > Robust steel tube construction > Powder coated surface > Attaches and detaches from the bike in seconds > Carefully tailored to each motorcycle model > Easy mounting without drilling or welding > Compatible with ALU-RACK > Various adapter kits for different brands available > Compatible to anti-theft device The ALU-RACK is a first choice product when looking for a premium rear rack: The versatile and elegant carrier, made from powder coated aluminum, offers perfect fit and allows mounting of QUICK-LOCK adapter plates for all established topcase brands. > Individually engineered for specific motorcycle models > Quick-release fasteners for QUICK-LOCK topcase adapter plates* > Compatible with QUICK-LOCK side carriers > Produced with highly precise CNC technology QUICK-LOCK adapter plate ALU-BOX topcase ALU-RACK 1. One-time installation of nearly invisible mounting brackets 2. The attached carrier is easily locked by a quarter turn of the QUICK-LOCK fasteners 3. QUICK-LOCK EVO side carrier with installed adapter kit for TraX /TRAX ADVENTURE cases *Separately sold adapter kits needed for case mounting *Separately sold adapter kits needed for case mounting 24 SW-MOTECH 2016 LUGGAGE SYSTEMS 25 SIDE CARRIERS & LUGGAGE RACKS

SEAT-RACK STEEL-RACK The SEAT-RACK was built to replace the pillion seat to increase carrying capacity. Custom-made for perfect fit. > Made from 4 mm thick aluminum > Tailored to the bike model > Easily fastened to original pillion mounting points > Fastening elements included > Provides mounting for soft luggage and QUICK-LOCK tank bag adaptation > Can be opened with the bike key > Foam seals keep moisture and dirt out > No modification of bike or pillion seat necessary Fastenings for pillion mount (bottom side of SEAT-RACK) The STEEL-RACK combines a large surface with a variety of tie-down points and mounting options for topcase adapter kits at a competitive price tag. > High quality powder coating > Can carry ALU-BOX touring cases* (starting p.16) > Also adaptable for GIVI cases* STEEL-RACK adapter kit ALU-RACK luggage rack extension This luggage rack extension is the ideal solution to secure large pieces of soft luggage. The durable aluminum plate fits any ALU-RACK. By using the QUICK-LOCK system the extension can be attached and removed within seconds. 3 x QUICK-LOCK > QUICK-LOCK fasteners > Black powder coated aluminum Tail bag Rackpack Art.No.: GPT.00.152.43001/B ALU-RACK *Separately sold adapter kits needed for topcase mounting 26 SW-MOTECH 2016 LUGGAGE SYSTEMS 27 LUGGAGE RACKS

QUICK-LOCK EVO tank ring QUICK-LOCK EVO electric tank ring The original QUICK-LOCK EVO system offers the perfect link between tank bag and motorcycle: The tank ring combines easy handling and sturdy mounting while tailored to the individual motorcycle model. The use of glass fiber reinforced nylon provides a reliable fit and prevents plastic residue. > Original QUICK-LOCK fasteners > Durable connection and easy mounting to tank threads > Pull-cord release for fast tank bag removal > Compatible to anti-theft device > Already prepared for electric kit > Motorcycle specific adapters available for bikes not compatible with gas cap mounting ATTACH In order to supply a charging station for GPS, digital camera and smartphone on the motorcycle we have developed the QUICK-LOCK electric system*. It consists of an electric top ring for QUICK-LOCK EVO tank bags, combined with an electric upgrade kit for QUICK-LOCK EVO tank rings. > Power supply for QUICK-LOCK EVO tank bags > Original switch mechanism prevents short circuits > Vibration-proof contacts > Easy installation at the tank > Electric kit for tank ring included > Delivered together with SAE connector > Maximum operating current of 7.5 amps Art.No.: TRE.00.640.10201/B (QUICK-LOCK EVO electric top ring) for QUICK-LOCK EVO tank ring QUICK-LOCK EVO top ring (bottom of tank bag) Lower the bag from above the QUICK-LOCK EVO tank ring and press down to engage REMOVE QUICK-LOCK EVO electric top ring Electric kit for QUICK-LOCK EVO tank ring When mounting the QUICK-LOCK EVO electric top ring the cables (covered by the top ring) go through the bottom of the tank bag. SAE tank bag connector for electric tank ring Pull the cord to release *Already included in delivery with a QUICK-LOCK EVO electric tank bag 28 SW-MOTECH 2016 LUGGAGE SYSTEMS 29 TANK RINGS (QUICK-LOCK EVO INSIDE)

QUICK-LOCK EVO tank bags Design, shape and features of our tank bags are perfectly geared towards the outline of each motorcycle model. Soft luggage by SW-MOTECH mainly is made of robust 1680D ballistic nylon or waterproof and easy-toclean Tarpaulin. The QUICK-LOCK EVO product line s original tank fastenings combine ease of use with superior craftsmanship. BEST BUY QUICK-LOCK EVO nylon tank bags are also available as an electric version that serves as a mobile charging station for your gear. Included in delivery of the QUICK-LOCK EVO electric tank bags are electric top ring, tank ring electric kit and SAE connector. (EXCERPT) > QUICK-LOCK EVO quick-release fastener * > Volume expansion (except Yukon 90 and Engage) > GPS and map holder mounting points (except Yukon 90 and Micro) > Inner compartments ** > Zipper garage ** > Rain cover ** > Retroreflective details ** Yukon 90 / 9 liters City / 11 15 liters Micro / 2,5 5 liters Sport / 14 21 liters Daypack / 5 9 liters Trial / 15 22 liters Engage / 7 liters GS / 16 22 liters www.modernmotodiaries.com *QUICK-LOCK EVO tank ring needed for installation **depending on tank bag model 30 SW-MOTECH 2016 LUGGAGE SYSTEMS 31 TANK BAGS (QUICK-LOCK EVO INSIDE)

QUICK-LOCK tank ring QUICK-LOCK tank rings are the installation platform for QUICK-LOCK ION tank bags. For a safe fit we offer motorcycle model specific tank rings, made of glass fiber reinforced nylon, as well as adaptations for bikes without gas tank mounting option. > Original quick-release fastening system > Fast and safe mounting on the tank ring > Easy tank bag removal via pull-cord release > Adapters for bikes without visible gas cap screws available QUICK-LOCK top ring (bottom of tank bag) ATTACH Lower the bag from behind the tank ring, lead the notches located at the top ring into the tank ring. Then press downwards to engage until the fastenings lock in place. ION tank bags Impressive simplicity with a low price point: ION tank bags represent the entry level class of SW-MOTECHs high quality tank bags. ION one, two and three are built to work together with the QUICK-LOCK platform, ION four uses classic strap mounting to rest safely on the tank. > Integrated map compartment > Volume expansion > Mesh compartments on the inside > Cable port > Retroreflective details > Rain cover or waterproof inner bags > QUICK-LOCK top ring* or fastening straps included REMOVE Simply pull the cord to release. QUICK-LOCK tank bag ION one / 5-9 liters Universal fit QUICK-LOCK tank bag ION two / 13-20 liters Fits long, flat tanks QUICK-LOCK tank bag ION three / 15-22 liters For slightly curved tanks Strap tank bag ION four / 13-22 liters For narrow curved tanks Art.No.: BC.TRS.00.201.10000 Art.No.: BC.TRS.00.202.10000 Art.No.: BC.TRS.00.203.10000 Art.No.: BC.TRS.00.204.10000 *QUICK-LOCK tank ring required for installation 32 SW-MOTECH 2016 LUGGAGE SYSTEMS 33 TANK RINGS & TANK BAGS (QUICK-LOCK INSIDE)

Strap tank bags Enduro & Enduro LT Timelessly simple: The Enduro line of tank bags fit on any sloped enduro or dual sports motorcycle tank. Two quick-release buckles allow easy refueling. The large Enduro tank bag is also available in smaller size as Enduro LT. > Made from durable 1680D ballistic nylon > Durable three point strap mounting > Volume expansion > Integrated map holder > Capacity: 13-22 / 5-7.5 liters Art.No. (Enduro/Enduro LT): BC.TRS.00.130.10000 / BC.TRS.00.131.10000 All weather tank bag Drybag 130 > Made from robust, waterproof Tarpaulin > Zippered volume expansion > Retroreflective details > Velcro for DIN A4 map holder > 2 outer pockets > Padded stowage organizer > Tank friendly bottom > Straps with snap buckles Art.No.: BC.WPB.00.007.10000 Map holder > Made from durable 1680D ballistic nylon > Large DIN A4/letter compartment > Compatible to tank bag volume expansion Made from waterproof material, our smartphone and tablet drybags offer flexibility under cold weather and fit most QUICK- LOCK tank bags. While the drybags protect your hardware the display stays in plain sight, even when using the tank bag volume expansion. Tank bag GPS mount The GPS mount can be attached to all QUICK-LOCK EVO tank bags (except Micro and Yukon 90). The pivotable mounting plate is compatible to GPS systems and Navi Case Pro bags. > For QUICK-LOCK EVO tank bag fastenings > Mounting plate with standard hole pattern > Please note: Navi Case Pro not included in delivery Art.No.: BCK.GPS.00.010.100 Art.No.: BC.TRS.00.150.10000 Smartphone/Tablet Drybag Smartphone/Tablet Drybag Art.No.: BC.TRS.00.152.10000 / BC.TRS.00.151.10000 34 SW-MOTECH 2016 LUGGAGE SYSTEMS Strap tank bags & tank bag accessories 35

Slipstream / 13 liters Jetpack / 20 33 liters Rearbag / 24 36 liters (EXCERPT) > Made from reinforced 1680D ballistic nylon > Volume expansion, depending on bag model > Outer pockets and inner mesh compartments, depending on bag design > Tie-down points and fastenings for easy combination with other luggage > Backpack carrying straps (Slipstream, Jetpack, Rearbag) > Waterproof inner bags or rain cover > Retroreflective details or piping Rackpack / 36 45 liters Cargobag / 50 liters Racepack / 50 65 liters Motorcycle tail bags Speedpack / 75 90 liters Tentbag / 22 liters Durable, versatile and innovative: From the compact Slipstream to the spacious Speedpack our tail bags come in a broad range of sizes and styles to meet every storage requirement imaginable. The robust premium products sport a secure 4 point mounting and can be attached to luggage rack, SEAT-RACK or pillion seat. 36 SW-MOTECH 2016 LUGGAGE SYSTEMS 37 TAIL BAGS

Drybag 300 Drybag 80 Drybag 180 Drybag 250 Waterproof all-round tail bag Drybag 80 Maybe our most versatile piece of luggage, the Drybag 80 can be used as tank bag, tail bag and even be installed on pillion seat or crash bar. The convenient waterproof bag can also be carried on its shoulder strap. > Tarpaulin bag with roll closure > Capacity of 8 liters > Universal fit > Secure strap fastening > Mounting straps and shoulder strap included Art.No.: BC.WPB.00.010.10001 All weather tail bag Drybag 180 Tail bag and convenient carrying container all in one: The waterproof and lightweight Drybag 180 takes its place on top of pillion seat, luggage rack or other Drybags to give fast access to all necessities. > Waterproof Tarpaulin bag with roll closure > Capacity of 18 liters > Can easily be combined with other Drybags > Secure strap mounting > Mounting straps and shoulder strap included Art.No.: BC.WPB.00.018.10000 All weather tail bag Drybag 250/450 The two end-roll Drybags 250 and 450 provide reliable protection from water and dirt at a competitive price. > Waterproof Tarpaulin bag with roll closure > Can easily be combined with other Drybags > Retroreflective details > Secure 4 point mounting > Mounting straps included > Capacity of 25/45 liters (Drybag 250/450) All weather tail bag Drybag 350/600 A practical combination of tail and carrying bag, Drybag 350 and 600 offer carrying comfort as well as lots of weather and dust proof luggage space. > Waterproof Tarpaulin bag with roll closure > Can easily be combined with other Drybags > Retroreflective details > Secure 4 point mounting > Mounting straps and shoulder strap included > Capacity of 35/60 liters (Drybag 350/600) 38 SW-MOTECH 2016 LUGGAGE SYSTEMS 39 WATERPROOF LINE tail bags

All weather tail bag Drybag 620 Backpack Drybag 300 All weather, all terrain: Up to 72 liters of luggage fit into the water and dustproof Drybag 620. In addition the large tail bag can serve as mounting basis for other Drybags, a large opening allows easy loading and unpacking. > Waterproof Tarpaulin bag with roll closure > Fits nearly any motorcycle > Can easily be combined with other Drybags > Retroreflective details > Secure 4 point mounting > Mounting straps included > Capacity: 62-72 liters Art.No.: BC.WPB.00.006.10000 Expanded volume (72 l) 2 Challenging weather and driving conditions allow the Drybag 300 to play to its strengths: The reliable backpack protects up to 30 liters of luggage from water and dirt. The all weather rucksack comes with an ergonomic carrying system and is available in gray or bright yellow color. > Waterproof Tarpaulin material > Roll closure design prevents wicking effects > Padded shoulder straps, waist band and back for high carrying comfort and best fit > Zippered outer pocket > Retroreflective details > Capacity of 30 liters Art.No.: BC.WPB.00.011.10000 (gray) BC.WPB.00.011.10000/Y (yellow) Drypacks Drybag 350/600 Get your luggage organized: Our Drypacks help you to organize items inside tail bag or touring case and at the same time provide protection from moisture. The compact bags can also be fastened to other motorcycle luggage. > Made from 210/250D Tarpaulin > Watertight roll closure > Beltline hook > Capacity of 4, 8, 13 or 20 liters > Also available as a set of three Drypacks (4/8/13 liters) Our bright yellow Drybags are a real eye catcher. The soft luggage offers all the advantages of their gray counterparts (p.39): Robust material, complete watertightness and lots of possible combinations with other Drybags. > Waterproof Tarpaulin bag with roll closure > UV resistant material and coloring > Can easily be combined with other Drybags > Capacity of 35/60 liters (Drybag 350/600) Art.No.: BC.WPB.00.001.10001/Y (Drybag 350) BC.WPB.00.002.10001/Y (Drybag 600) 40 SW-MOTECH 2016 LUGGAGE SYSTEMS 41 WATERPROOF LINE / SAFETY LINE

Racer Trooper Flexpack Triton Baracuda Drybag 20 The compact Racer backpack is the ideal companion for shorter trips. The lightweight bag provides high wearing comfort while driving as well as on foot and comes with a laptop compartment. > Made from lightweight 600D polyester > Padded backside, waist and shoulder straps provide best fit and high carrying comfort > Integrated laptop holder (14") > Inner compartments and cable feedthrough > Retroreflective details > Integrated rain cover > Capacity of 16 liters For its 25 liters of capacity the Trooper displays a small outline. The backpack can convince with its well though-out layout and features two main compartments that can be accessed separately. > Made from lightweight 600D polyester > Padded backside, waist and shoulder straps provide high carrying comfort > 2 main compartments > Integrated laptop holder (15") > Inner compartments and cable feedthrough > Retroreflective details > Integrated rain cover, helmet net > Capacity of 25 liters Folded together the Flexpack needs no more space than a human fist. But the little helper, sporting a water-resistant PU coating, can be transformed into a backpack with a capacity of 30 liters. Art.No.: BC.WPB.00.019.10000 1 The Baracuda s little brother is aimed mainly at sportive drivers that appreciate its low weight and flat outline as well as its waterproof design. > Waterproof Tarpaulin backpack > Roll closure design > Fully adjustable carrying harness for best fit and high wearing comfort > Ergonomic back and waist belt padding > Padded laptop compartment (17") > Organizer meshes and outer pocket > Retroreflective details > Capacity of 20 liters Art.No.: BC.WPB.00.004.10001 The waterproof backpack Baracuda offers high wearing comfort, a robust Tarpaulin skin and convenient details like volume compression and a fully adjustable strap harness. > Waterproof Tarpaulin backpack > Roll closure design > Fully adjustable carrying harness for best fit and high wearing comfort > Ergonomic back and waist belt padding > Padded laptop compartment (17") > Organizer meshes and outer pocket > Retroreflective details > Capacity of 25 liters Art.No.: BC.WPB.00.003.10001 The waist bag Drybag 20 offers a safe place to store valuables, smartphone or wallet. The waterproof belt bag only weighs 340 grams and consists of robust, easy-to-clean Tarpaulin. Its compact size and high carrying comfort recommend the bag for every tour. Art.No.: BC.WPB.00.005.10002 Art.No.: BC.RUC.00.002.10000 Art.No.: BC.RUC.00.001.10000 42 SW-MOTECH 2016 LUGGAGE SYSTEMS 43 BACKPACKS

Universal GPS mount kits Navi Case Pro GPS clip adapter For secure mounting of GPS device, camera, smartphone and more in the motorcycle cockpit we offer universally applicable mounting kits with a broad variation of installation possibilities, ranging from mirror thread mounting to RAM arm. All kits will fit handlebars with ø 22 mm, 28 mm, 1". The included ball fits mounting clamp, M6- or M8 thread or GPS mount for mirror thread. INCLUDED IN SETS 1 Universal mounting clamp with inserts 2 Ball with M8 thread and M6 converter 3 Mirror thread GPS mount 4 RAM arm 3 inch 5 Universal mount plate 6 GoPro camera adapter 7 Navi Case Pro M 8 Navi Case Pro L 9 Mounting material 4 5 6 The splash water proof Navi Case Pro bags for GPS devices and smartphones come in three sizes with a fresh design and a rich set of features. The transparent window membrane allows easy operation of touch surfaces. Velcro straps in the padded bag help to secure the valuable hardware. > Compatible with GPS mount, RAM system and GPS clip adapter > Front and back made from robust EVA material > Rubber coated all around zipper > Cable port Please note: GPS mount recommended for installation This clip fastening provides the means for quick attachment and removal of Navi Pro Cases and GPS devices with Richter mount on all GPS mounts made by SW-MOTECH. > Made from durable plastics > Brass M4 insert nuts > Compatible with Richter system Art.No.: GPS.00.308.10501/B Components 1 2 Universal GPS mount kit ball Universal GPS mount kit RAM Universal mount kit GoPro Universal GPS mount kit Navi Case Pro M Universal GPS mount kit Navi Case Pro L 1 THREE BASIC MOUNTING OPTIONS 2 1 PRODUCT INFORMATION ARTICLE NUMBER 1 Navi Case Pro S Dimensions 150 x 87 x 42 mm Capacity 146 x 83 x 38 mm 2 Navi Case Pro M Dimensions 135 x 100 x 42 mm Capacity 131 x 96 x 38 mm 3 Navi Case Pro L Dimensions 160 x 115 x 42 mm Capacity 156 x 111 x 38 mm BC.GPS.00.007.10000 BC.GPS.00.008.10000 BC.GPS.00.009.10000 3 4 2 2 1 5 6 2 7 2 8 9 3 Art.No. GPS.00.308.30100/B GPS.00.308.30300/B CPA.00.424.12500/B GPS.00.308.30001/B GPS.00.308.30201/B 2 3 3 44 SW-MOTECH 2016 NAVIGATION & POWER SUPPLY 45 GPS MOUNTS & ACCESSORIES

QUICK-LOCK GPS mount Nonshock bar clamp GPS mount Good visibility in the cockpit and protection against vibration: Our GPS mounts, tailored to selected motorcycle models, with their QUICK-LOCK fastening system provide robust and comfortable installation as well as easy removal of the GPS mount. The pivoting mounting plate accepts all motorcycle GPS devices, GPS clip adapter as well as device bags like our Navi Case Pro and smartphone hard cases. > For GPS, GPS clip adapter, Navi Case Pro and smartphone hard cases > QUICK-LOCK fasteners > Integrated vibration dampening > Pivotable device mount > Powder coated adapter plate > Mount made of glass reinforced plastics With this shock absorbing mount all motorcycle GPS devices can be installed to the handlebar. At the same time the carefully crafted aluminum clamps, available for a variety of bar tube diameters, fit well into the styling of different motorcycles. The adapter can also be used together with Navi Case Pro, GPS clip adapter and smartphone hard cases. > For GPS, GPS clip adapter, Navi Case Pro and smartphone hard cases > Integrated vibration dampening > Pivotable device mounting plate > Powder coated top section > Aluminum bar clamp available with various surface finishes (see table) PRODUCT INFORMATION ARTICLE NUMBER Nonshock bar clamp GPS For ø 22 mm handlebar. Black. GPS.00.308.10000/B mount Nonshock bar clamp GPS For ø 28 mm handlebar. Silver. GPS.00.308.10200/S mount Nonshock bar clamp GPS For 1.25" (ø 32 mm) handlebar. Silver. GPS.00.308.10300/S mount Nonshock bar clamp GPS mount For 1" (ø 25.4 mm) handlebar. Silver. GPS.00.308.10100/S Vibration dampening system Universal hole pattern Vibration dampening system TRIUMPH Tiger Explorer 46 SW-MOTECH 2016 NAVIGATION & POWER SUPPLY GPS MOUNTS & ACCESSORIES 47

COMPONENTS FOR INDIVIDUAL COMPILATION MOUNTING KITS FOR NAVIGATION DEVICE AND CAMERA Device mount system Ball and ball clamp are useful for mounting GPS devices or cameras to the motorcycle in a variety of locations. Components are available individually or in complete kits. BEST BUY: Navi Case Pro (p.45) MOUNTING BASE (ON MOTORCYCLE) Universal mount kit GoPro Art.No.: CPA.00.424.12500/B Camera mount kit M6/M8 Art.No.: CPA.00.424.11000/B CPA.00.424.100 Universal mount kit M6/M8 Art.No.: CPA.00.424.12000/B CPA.00.424.102 Ball clamp universal mount kit 12.5 mm - 25.0 mm Art.No.: CPA.00.424.17000/B Ball M6, M8 / mirror thread ball M10 Ball clamp 12.5 mm - 25.0 mm* Mirror thread GPS mount Smartphone hard cases CONNECTION ELEMENTS The weatherproof device cases protect iphone and Samsung Galaxy smartphones when used as navigation unit or camera in the motorcycle cockpit. The device cases easily fit to our GPS mounts. Hard case for Samsung Galaxy S5 Hard case for iphone DEVICE MOUNTS Pivoted socket arm RAM arm 2 inch / 3 inch RAM extension > Water resistant plastic shell > Touch screen operation support > Transparent camera lens cover > Adjustable 360 view > Vibration and shock dampening inlay > Cable port Please note: GPS mount needed for installation Available for: iphone 3, 4, 5, 5c, 6, 6 Plus ipod Touch and Samsung Galaxy S5 GoPro camera mount Camera mount Universal mount GARMIN nuvi ball 48 SW-MOTECH 2016 * For the hollow stem nut of sport bikes with clip-on handlebars (depending on stem nut inner diameter) NAVIGATION & POWER SUPPLY 49 GPS MOUNTS & ACCESSORIES

Universal electric kit Electric motorbike adapters The Universal electric kit supplies accessories like smartphone or GPS with power. It consists of a cigarette lighter socket with USB power port. Included are handlebar clamp brackets fitting most handlebars. It is also possible to fasten the socket into the fairing via a threaded coupling. > Cigarette lighter power outlet > Water resistant rubber seal > USB power port, 1.000 ma > Fuse included in delivery > Mounting brackets for 22/28 mm handlebar clamps > Threaded coupling allows fastening to fairing > Fits most standard handlebars Art.No.: EMA.00.107.20001/B Navigation, communication, multimedia our broad selection of electrical connections helps you to charge cell phone, GPS unit, air compressor and other gadgets. All articles are carefully selected with permanent use on the motorcycle in view. A splash-proof sealing protects components that are mounted to exposed positions on the bike. Installation example: Power supply through 12 V DIN socket OPTIONS FOR POWER SUPPLY 12 V DIN power socket Cigarette lighter socket Electric tank bag 1 2 3 4 5 6 7 8 9 INCLUDED: Cigarette lighter power outlet, USB adapter (1.000 ma), 2 mounting brackets 1 Bracket for 12 V DIN power socket 2 12 V DIN power socket 3 Double USB power port with universal plug 4 Micro USB charge lead with universal plug 5 Mini USB charge lead with universal plug 6 Universal safety plug for individual cabling 7 Cigarette lighter receptacle for DIN socket 8 Cigarette lighter adapter for DIN socket 9 SAE to DIN power socket connector 10 Cigarette lighter and DIN power socket for SAE 11 Cigarette lighter socket with SAE plug 12 Two cigarette lighter sockets with SAE connector 10 11 12 1+2 1+2+5 1+2+9+10 50 SW-MOTECH 2016 NAVIGATION & POWER SUPPLY COCKPIT POWER SUPPLY 51

Universal bar risers Our universal bar risers, made from aluminum alloy, depending the model offer a bar elevation from 20 to 50 mm. > Available for handlebars with ø 22 or 28 mm > Height increase for handlebars with ø 22 mm: 20, 25, 30 or 50 mm > Height increase for handlebars with ø 28 mm: 30 mm > Black or silver powder coating Motorcycle model specific bar risers For a broad variety of motorcycle models we offer specifically designed bar risers. The robust aluminum elements are CNC machine milled and offer a height increase of 20, 25 or 30 mm. > Machine milled from high strength aluminum alloy > Black or silver anodizing BMW R 1200 GS LC Universal barbacks Our durable aluminum barbacks shift the handlebar 22 mm closer to the driver. > Moves bar position up to 30 mm and 22 mm back > Hole spacing: 32 38 mm (ø 22 mm) or 37 46 mm (ø 28 mm) > Powder coated, black or silver Motorcycle model specific barbacks Like the bar risers our model specific barbacks seamlessly integrate into the motorcycle s styling. Together with a raise of 31 mm the handlebar approaches the driver by 22 mm. > Machine milled from high strength aluminum alloy > Black or silver anodizing BMW R 1200 GS 52 SW-MOTECH 2016 ERGONOMICS BAR POSITIONING 53

Bar converters Vario barback This converter allows the installation of a 28 mm handlebar to a 22 mm bar mount and at the same time offers 22 mm of elevation to make your ride more comfortable. The converters are cnc machine milled from high-strength aluminum alloy with hole spacing 30 37 mm. > For adaptation of 28 mm handlebar to 22 mm fastening > Height increase of 22 mm > Hole spacing 30 to 37 mm > High-grade aluminum alloy > Black or silver anodizing Please note: Check cockpit cable length prior to installation A highly versatile bar raiser and barback in one product: Our Vario barbacks allow stepless adjustment of the handlebar position from front to back as well as variable height adjustment. The anodized vario barbacks are available for 22 and 28 mm handlebars, also available is a product version with a 28 mm bar converter. > Highly versatile handlebar positioning > Stepless adjustment of handlebar angle and shift > For handlebars with ø 22 or 28 mm > Maximum raise of 40 and 50 mm > 10 mm spacer element included in delivery > Also available with 28 mm converter > Made from extra strong aluminum > Black or silver anodizing Please note: Check cockpit cable length prior to installation Vario barback Vario barback converter ø 28 mm ø 28 mm ø 22 mm ø 28 mm 54 SW-MOTECH 2016 ERGONOMICS BAR POSITIONING 55

Gear levers Footrest kits Gear levers made by SW-MOTECH combine choice materials and innovative design with a perfect fit: Machine milled from high quality aluminum alloy our gear levers offer either stepless or incremental adjustment. This makes it easy to find the best foot positioning. > Made from CNC-machined aluminum > HART-COAT surface treatment > Spring lock provides lever protection > Unit displacement either stepless or in intervals of 1, 2 and 3 cm for minute adjustment The textured anti-traction surface of our footpegs offers best grip for drivers of dual sport motorcycles, off road and street motorcycles alike. To help you to find the best riding or standing position, the tough and durable stainless steel footrest kits can be installed in two heights. > Installed to original footrest mounts > Vertical adjustment supporting original height or foot position lowered by 15 mm > Large footrest made from stainless steel with removable rubber pad > Aluminum hinge element > Textured anti-slip surface 56 SW-MOTECH 2016 ERGONOMICS Gear levers / Footrests 57

Mirror extensions Tired of only looking at your own shoulders in the rear mirror? Our mirror extensions help you to get a better view by increasing the distance between mirror and bike midpoint and are available in variants for any type of motorcycle, integrating into an adventure bike s styling as well as into a sports motorcycle s fairing. > Machine milled from aluminum, steel or polyamide > High quality finish > Up to 4 cm height increase > Up to 4 cm lateral displacement UNIVERSAL EXTENSION Mounted to the mirror thread. UNIVERSAL EXTENSION BMW Mounted to the mirror thread. LINK EXTENSION Attachment to the fairing. PROFILE EXTENSION Attachment to the fairing. HINGE EXTENSION Attachment to the fairing. MIRROR ADAPTER For mounting accessory mirrors on YAMAHA and DUCATI motorcycles / delivered with left/right and right/right thread Art.No.: SPA.00.021.10000/B Left: Blocked view without mirror adaptation. Right: Mirror extensions allowing a free field of view. 58 SW-MOTECH 2016 SAFETY Mirror extensions 59

KOBRA handguards Barkbusters handguards Protection from stone chip, weather and in case of accidents: The tough aluminum backbone of KOBRA handguard kits protects hands and gear levers. Replaceable shells made of shock resistant polypropylene plastics provide additional shielding against weather, rocks and while driving through rough terrain. > Strong aluminum backbone > Shock resistant shells > Two point mounting on handlebar inside thread and handle or one point mounting* > Handguard extensions and LED indicators sold separately Fitting nearly every motorcycle model: Barkbusters handguards come in a great range of designs ranging from the especially shock resistant EGO protector for trial and enduro driving to the flexible all weather handguard BBZ, geared towards touring and sports motorcycles. 1 Aluminum backbone 2 BEST BUY: 1 KOBRA handguard extension 2 KOBRA LED indicator 60 SW-MOTECH 2016 *Shells with single clamp mounting delivered w/o backbone SAFETY 61 Handguards

Crash bars Frame sliders Axle sliders Whether adventure bike or street motorcycle: Crash bars from SW-MOTECH provide protection for tank, fairing and other components. The model specific crash bars are designed to play well with the motorcycle s styling without compromising riding or cornering quality. Reliable protection for frame, engine and fairing: The machine milled slider pads help to prevent damage to the motorcycle and can be exchanged in a heartbeat. The pad s streamlined surface provides significantly better protection than a conventional frame slider design. > Durable nylon pads > CNC machined aluminum or steel mounting elements > Bike-specific mounting > Delivered in pairs Front and rear axle sliders made by SW- MOTECH are tailored to each motorcycle model. In case of an accident the pads with a diameter of 50 mm help to prevent costly damage to drive shaft and swing arm. > Extremely tough and durable > Optimal cornering clearance > Custom tailored fastening elements > Robust mounting to existing anchor points on the motorcycle frame > Easy installation without drilling or welding > Made from steel or stainless steel > Surface of steel bars powder coated > Surface of stainless steel bars electropolished 62 SW-MOTECH 2016 SAFETY Crash bars / Slider kits 63

Engine guard Radiator guard Chain guard Perfect protection from rock chip and ground collision for your engine block: Our engine guards are laser cut from highly durable aluminum alloy and provide sturdy engine protection and ruggedized styling for touring motorcycles, adventure machines and naked bikes alike. > Individually designed for each motorcycle model > Perfect fit and optimum ground clearance > Robust mounting to existing anchor points on the motorcycle frame > Easy installation without drilling or welding > Surface brushed and/or powder coated > Colors matching the motorcycle design > Tool box for engine guard sold separately > Made from high-grade aluminum alloy > Reliable radiator cover with a perfect fit > Variants with laser cut lettering available > Easy installation > Made from high-grade aluminum alloy > Tailored to each motorcycle model > Covering the complete chain length > Rubber dampened mounting > Easy installation Suzuki V-Strom 1000 BMW R ninet KTM 1290 Super Duke 64 SW-MOTECH 2016 SAFETY 65 Engine guards / Radiator guards / Chain guards

HAWK auxiliary lights HAWK auxiliary lights come with either 5W LED or 55W H3 lights; solid aluminum housing protects the light source from wind and weather. Included in delivery are a cable harness and a splash water proof on/off switch. > Fog lights providing a broad field of illumination to improve visibility > Off road lights with a highly focused beam for better field of view > Available with LED or H3 lamps > Pressure casted aluminum casing > Available in black or silver color > Splash water proof cockpit switch > Fog lights with ECE test mark, for use on European roads no additional registration/ permit necessary > Cable harness with fuse included Please note: Light clamps (see table) and motorcycle model-specific mounting sets sold separately Visibility plays a central role for safe riding especially when fog or dense rain are impairing the field of view. HAWK auxiliary lights help you to see better and to be better seen. The fog and off-road lights are also available as energy efficient and virtually maintenance free LED variants. 1 2 3 Mounted with light clamps on crash bar HAWK fog lights HAWK LED off-road lights 4 PRODUCT INFORMATION ARTICLE NUMBER HAWK LED off-road lights Black. 2 x 10W LEDs. Power switch. Cable harness. In pairs. NSW.00.004.10400/B HAWK LED fog lights Black. ECE test mark. 2 x 10W LEDs. Power switch. Cable harness. In pairs. NSW.00.004.10500/B HAWK off-road lights Black. H3 55W lights. Power switch. Cable harness. In pairs. NSW.00.004.10200/B HAWK off-road lights Silver. H3 55W lights. Power switch. Cable harness. In pairs. NSW.00.004.10200/S HAWK fog lights Black. ECE test mark. H3 55W lights. Power switch. Cable harness. In pairs. NSW.00.004.10100/B HAWK fog lights Silver. ECE test mark. H3 55W lights. Power switch. Cable harness. In pairs. NSW.00.004.10100/S HAWK headlight guards* Black. Aluminum. For off-road lights. In pairs. NSW.00.004.10300/B HAWK headlight guards* Silver. Aluminum. For off-road lights. In pairs. NSW.00.004.10300/S HAWK light clamps Black. For crash bars ø 22, 26, 27, 28 mm. NSW.00.004.13000/B Cockpit switch Black. Splashproof casing. For handlebars. 30 cm cable. EMA.00.107.11900 *Not suitable for HAWK LED fog lights 66 SW-MOTECH 2016 1-3 HAWK LED fog lights, 2+3 Mounted with light mount set (bike-specific), 4 HAWK light clamp (set includes 2 clamps with inlays for crash bars ø 22/26/27/28 mm) SAFETY Auxiliary lights & accessories 67

Centerstands When new motorcycle models are introduced we usually are the first supplier to develop a fitting centerstand. Our tough tube construction attaches to existing frame anchor points and offers best cornering clearance, easy jack up and a safe stand for maintenance work as well as for parking a fully loaded bike. > Tough steel construction > High grade powder coating > Perfect fit for each motorcycle model > Easy installation to the bike frame > Optimum lean angle > Side arm for adequate leverage > Textured surface facilitates operation > Spring mounting tool and centerstand assist grip sold separately Centerstand assist grip Bike-specific solutions, designed to assist lifting motorcycles onto the centerstand. 68 SW-MOTECH 2016 SUZUKI V-Strom 1000 Honda CB 500 F KAWASAKI Versys 650 MAINTENANCE Centerstands 69

Style meets function Customize your bike! The safety and ergonomic products of our style meets function line stand for protection, perfect fit and exceptional design. Starting with engine case protector and brake cylinder guard over gear levers and crash pads up to cylinder and headlight protection, every component is designed to offer best functionality while adding an individual touch to the bike design. BMW R ninet 70 SW-MOTECH 2016 STYLE MEETS FUNCTION CUSTOMIZING ACCESSORIES 71