at the time of installation only.

Tops in Recoil Pads xperimental Services, Inc.,* from Akron hio, performed a series of standardized static, dynamic and pulse tests on seven pads from four different manufacturers in an effort to sort through the conflicting claims of superiority in recoil pads. f the models tested, the three highest rated pads were all KICK-Z Recoil Pads. Results of the test are shown on the following chart: KICK-Z uses Sorbothane, a proprietary visco-elastic material produced by Sorbothane, Inc. from Kent, hio. It is scientifically proven to be the finest cushioning material available! All KICK-Z Recoil Pads are made of solid Sorbothane, no hollow spots or metal plates to ever worry about. *xperimental Services, Inc. (www.esilab.com) is a well established independent test lab specializing in polymer testing and accredited by the American Association for Lab Accreditation. 1819 Schurman Way, Suite 106, land, WA 98674 KICK-Z Products RCIL PADS Toll Free: 877-KICKZ Fax: (360) 225-9702 kickeez@cni.net www.kickeezproducts.com KICK-Z makes no express warranty for their products. There is no implied warranty to merchantability and/or fitness for a particular use with respect to the quality and performances of their products except KICK-Z will replace recoil pads that are defective in material and/or workmanship at the time of installation only.

INTRDUCTIN KICK-Z, the most popular Grind-to-Fit recoil pad line on the market, is available in 19 Pre-Fit pads. KICK-Z Grind-to-Fit Recoil Pads Pre-Fit KICK-Z Recoil Pads designed to fit most models and manufacturers. KICK-Z is the revolutionary recoil pad made of the visco elastic polymer Sorbothane. Scientifically proven to be the finest cushioning material available, Sorbothane gives KICK-Z pads extraordinary properties. Sorbothane provides shock absorption and reduces recoil effectively and quickly. Less recoil reduces flinching, easing sore shoulders and cheeks. Sorbothane virtually eliminates the rebound effect of the first shot allowing for faster and more accurate second shots. KICK-Z Sorbothane Recoil Pads are ideal for hunters, recreational and competitive shooters. With KICK-Z recoil pads, unprecedented absorption levels are possible because Sorbothane weakens shock waves by dispersing energy outward from the impact source. Sorbothane will not distort or lose its effectiveness after being compressed thousands of times and will not bottom out as do most common rubber materials on the market today. Sorbothane remains effective in all weather conditions.

INSLS Sorbothane, a proprietary visco-elastic material, is custom molded and specified by engineers shock absorption levels of up to 94.7%. Unprecedented absorption levels are possible because Sorbothane maintains stability and damping over a broad temperature range, enabling it to isolate damaging vibrations and impact shock in varied conditions. Its near faultless memory INTRDUCTIN worldwide for its superior damping and isolation ensures a return to original shape, even after properties and scientifically proven to be the finest repeated compressions, making Sorbothane ideal cushioning material available. In many applications for a variety of engineering design applications and laboratory tests Sorbothane has achieved requiring shock absorption and vibration isolation. SRBTHAN PRVIDS CLAR VIW F SHUTTL LAUNCH SRBTHAN PRTCTS LIBRTY Durable and Long-Lasting Performance The Ultra Sportsman insole combines lightweight polyurethane foam that provides structural support with Sorbothane for cushioning comfort and foot-strike protection. Sorbothane is the NLY insole material that absorbs up to 94.7% of impact shock. And unlike standard insole materials, which can bottom out and lose effectiveness, Sorbothane performs under any condition. Durable and comfortable, Ultra Sportsman insoles retain their shock-absorbing properties month after month. Lightweight and antifungal they also breathe, which makes for a much cooler insole. Trusted by Professionals Sorbothane insoles are recommended by doctors, sports medicine specialists and professional trainers worldwide. Sorbothane insoles are your best defense against foot pain, back pain and impact-related injuries. CD AA A B C D F G H SIZ CHART INSL SIZ WMN MN 4 1/2-5 1/2 6-7 7 1/2-8 1/2 5-6 9-10 6 1/2-7 1/2 10 1/2-11 1/2 8-9 12 9 1/2-10 1/2 11-12 12 1/2-13 1/2 14-15 When leading NASA scientists needed a superior damper to protect space shuttle cameras during the launch of the DISCVRY, they turned to Sorbothane. Sorbothane, Inc. engineers supplied the NASA design team with a unique Sorbothane isolator designed to protect shuttle cameras from the violent forces thrust upon them during launch. The Sorbothane component shock absorber attenuated vibration damage to the highly sensitive shuttle cameras. These cameras were strategically placed to provide NASA with vital information used to verify the integrity of the shuttle s heat tiles. Sorbothane isolation components are also used to stabilize the television cameras used to broadcast auto racing. Curators from the National Park Service and the Philadelphia Museum of Art requested Sorbothane, Inc. to design an isolation system to protect the Liberty Bell as it was transported from its former home in the Liberty Bell Pavilion. A specially designed wheeled carriage, outfitted with Sorbothane isolation mounts, supported the Liberty Bell and prevented the transfer of harmful shock and vibration energy. Alternating layers of steel and Sorbothane isolated the Liberty Bell from harmonic vibrations and prevented shock energy transfer. Sorbothane s chemical composition makes it an effective material over wide ranges of temperature and frequency. Isolator designs can be tuned to eliminate specific frequencies that would otherwise harm valuable payloads.

800 SRIS 600 SRIS 102 SRIS 101 SRIS GRIND-T-FIT SPCIAL SLTTD This pad was designed with an elliptical hole especially for those difficult to fit stocks such as Benelli (including synthetic), the Browning Gold, the Beretta 390, and many other problem fittings. ne Size: Large Two Thicknesses: 3/4 15/16 Color: Black (B) nly 801-8-XL 2 1/4 x 6 x 15/16 801-6-XL 2 1/4 x 6 x 3/4 MAGNUM riginally designed for use on extra large bore guns, but it is suitable for any gun to tame heavy recoil. It has a basically flat back and is canted downward on both ends for easy shouldering. ne Thickness: 1-3/8 Colors: Black (B), Brown (BR) 501-125-L 2 x 5 5/8 x 1 3/8 502-125-M 1 7/8 x 5 1/4 x 1 3/8 RCKR This design lets the recoil pad mount more consistently to the same pocket area and naturally affords less opportunity for shoulder discomfort due to the tapered toe-end design. Three Thicknesses: 3/4 15/16 1-1/8 Color: Black (B) nly Size: WxLxT 601-10-L 2 x 5 5/8 x 1 1/8 601-8-L 2 x 5 5/8 x 15/16 601-6-L 2 x 5 5/8 x 3/4 602-10-M 1 7/8 x 5 1/4 x 1 1/8 602-8-M 1 7/8 x 5 1/4 x 15/16 602-6-M 1 7/8 x 5 1/4 x 3/4 500 SRIS 400 SRIS TRAP This pad has a concave face and was designed especially for Fixed Position trapshooting. Three Thicknesses: 3/4 15/16 1-1/8 Color: Black (B), Brown (BR) 401-10-L 2 x 5 5/8 x 1 1/8 401-8-L 2 x 5 5/8 x 15/16 401-6-L 2 x 5 5/8 x 3/4 402-10-M 1 7/8 x 5 1/4 x 1 1/8 402-8-M 1 7/8 x 5 1/4 x 15/16 402-6-M 1 7/8 x 5 1/4 x 3/4 PALM SWLL The Sorbothane Hand Z Palm Swell absorbs shock & vibration which helps alleviate hand & finger cramps & helps reduce hand fatigue, thus increasing the shoooter s ability to control the gun. The Palm Swell has checkering which gives a professional look & custom fit but is not recommended for woodstocks or synthetic stocks with high gloss oil finishes or a lot of checkering. ne Size Right or Left Hand Color: Black (B) nly 102-RPS Right ------ 102-LPS Left SPACRS MTAL Z SPACR CHK Z 701 SRIS These spacers are made from strong lightweight plastic polymer. They are easy to fit, grind, finish, and have superior machining and sanding characteristics for a GRAT LK. The new extra long slotted hole at the toe (small end) of the spacer makes it easy to match almost any hole location. Use one or more to adjust your length of pull. ne Size Three Thicknesses: 1/8 1/4 1/2 Color: Black (B) 701-180 1/8 -------------------- 701-140 1/4 Color: Black (B) 703-116 1/16 --------------------- 703-180 1/8 701-120 1/2 -------------------- This aluminum spacer is fashioned to fill the void of synthetic butt stocks while providing a solid foundation for mounting the KICK-Z recoil pad. Two Sizes Thickness: 3/8 Color: Silver 703 SRIS Cheek Protector An oval-shaped sheet of microcellular urethane that adheres to your gun comb to help eliminate recoil to the cheek. These pads are also very useful if you need some adjustment to your line of sight.chk-z is not designed to be put on and taken off. It can be removed, but should be regarded as semi-permanent. ne Size Four Thicknesses: 1/16 1/8 3/16 1/4 703-316 3/16 ----------- --------- 703-140 1/4 104 SRIS Size: WxLxT 104-138 4 3/8 x 1 1/2 x 3/8 ------ 104-238 4 3/4 x 1 3/8 x 3/8 SLICK Z Recoil Pad Treatment SLICK Z is a tough, flexible and completely transparent coating. When applied to the heel, toe or sides of a KICK-Z recoil pad, it becomes extremely slick therefore very easy to mount from the gun-down position without catching on clothing. This allows shooters to retain the benefits of KICK-Z recoil pads staying in position once mounted. SLICK Z will absolutely not crack or peel. It is easy to apply with an applicator cap. The kit contains treatment for several recoil pads and a bottle of cleaner to prepare recoil pads for the application of SLICK Z. Please read the instructions included in the package before application. ne Size 101-S PITCH SPACRS 105 SRIS These jet black spacers are made from a strong lightweight plastic polymer. They are easy to fit, grind and finish. They have superior machining and sanding characteristics for a GRAT LK. The universal slotted holes at each end make it easy to match almost any hole location. The uniform ends make one spacer either positive or negative depending on which end is up. Use one or more for your personal pitch. ne Size Two Thicknesses: 1/4 1/2 Color: Black (B) 105-140 1/4 ------ 105-120 1/2 SHULDR Z 702 SRIS The SHULDR Z is a rectangular sheet of Sorbothane which can be cut to fit any pocket in a coat, vest, shirt or jacket to add that extra bit of recoil protection needed by those who are extra sensitive to felt recoil. asy fitting can be obtained by shaping with any sharp instrument. ne Size ne Thickness: 1/8 Color: Black (B) Size: WxLxT 702-140 6 x 12 x 1/8 ACCSSRIS

4.943 300 SRIS 200 SRIS TMPLATS 1.575 1.605 4.85 KZ 104 4.930 KZ 105 TMPLATS 1.650 1.637 KZ 116 4.958 KZ 117 ALL PURPS This pad was designed as an All Purpose pad to be used in all shooting applications. Four Thicknesses: 1/2 3/4 15/16 1-1/8 Color: Black (B) nly 301-10-L 2 x 5 5/8 x 1 1/8 301-8-L 2 x 5 5/8 x 15/16 301-6-L 2 x 5 5/8 x 3/4 301-5-L 2 x 5 5/8 x 1/2 302-10-M 1 7/8 x 5 1/4 x 1 1/8 302-8-M 1 7/8 x 5 1/4 x 15/16 302-6-M 1 7/8 x 5 1/4 x 3/4 302-5-M 1 7/8 x 5 1/4 x 1/2 SPRTING CLAY Sporting Clay pads have basically the same contour lines as the All Purpose pads except the Sporting Clay pads have the heel canted approximately 45 to allow easier shouldering from low gun position. Three Thicknesses: 3/4 15/16 1-1/8 Colors: Black (B) nly 201-10-L 2 x 5 5/8 x 1 1/8 201-8-L 2 x 5 5/8 x 15/16 201-6-L 2 x 5 5/8 x 3/4 202-10-M 1 7/8 x 5 1/4 x 1 1/8 202-8-M 1 7/8 x 5 1/4 x 15/16 202-6-M 1 7/8 x 5 1/4 x 3/4 GRIND-T-FIT 4.62 4.858 JUNIR 304 SRIS 403 SRIS MDIFID TRAP 1.580 KZ 106 1.695 KZ 118 1.647 4.62 KZ 107 1.689 5.044 KZ 119 This pad was designed to accommodate stocks that have been shortened. The screw holes are spaced only 2 3/4 apart which allows for trouble-free mounting. ne Size: ne Thickness: 15/16 Color: Black (B) nly 304-8-JR 1 11/16 x 4 5/8 x 15/16 This pad has a revolutionary design that is slightly concave with a blast finish on the face. It gives you 100% contact with your shoulder, eliminating pressure points. Also, the design allows you to shoulder the gun in the same position every time, especially those shooters who like to shoot from the high shoulder position. ne Size: Large Three Thicknesses: 3/4 15/16 1-1/8 Color: Black (B) nly 403-10-L 2 x 5 5/8 x 1 1/8 403-8-L 2 x 5 5/8 x 15/16 403-6-L 2 x 5 5/8 x 3/4 < PN

According to independent testing, the KICK-Z Dual-Action Recoil Pad absorbed more energy than any other recoil pad (see complete test results on the back cover of this brochure). 1.70 S PAT M ISSI AXIMU D R S M Y A L T N PL THA D CM N B SR GY AN RPTI R N IL ABS C R N TI C A AL- THAN U D RB L S I ING C R RB S AB IL HAN B RC T B R SR BS FT S T A URACY S CT RA CC ULT R RA SD A A Y LA INCR FR DUALACTIN ALL PURPS DUALACTIN 1.60 1.69 KZ 109 1.772 4.795 SPRTING CLAY 1.685 Color: Black on Black Size: W x L x T DA-301-10-L 2 x 5 5/8 x 1 1/8 DA layer 1/4 ----DA-301-8-L 2 x 5 5/8 x 15/16 DA layer 3/16 ----DA-302-10-M 1 7/8 x 5 1/4 x 1 1/8 DA layer 1/4 ----DA-302-8-M 1 7/8 x 5 1/4 x 15/16 DA layer 3/16 KZ 113 4.750 1.598 This pad was designed as an All Purpose pad to be used in all shooting applications. KZ 112 5.025 200 SRIS 300 SRIS KZ 108 5.360 R DS M I S R B PRV T A B S IL... M F R RCR C M 4.70 5.025 KZ 110 KZ 114 4.915 Sporting Clay pads have basically the same contour lines as the All Purpose pads except the Sporting Clay pads have the heel canted approximately 45 to allow easier shouldering from low gun position. 5.095 Color: Black on Black Size: W x L x T DA-201-10-L 2 x 5 5/8 x 1 1/8 DA layer 1/4 ----DA-201-8-L 2 x 5 5/8 x 15/16 DA layer 3/16 ----DA-202-10-M 1 7/8 x 5 1/4 x 1 1/8 DA layer 1/4 ----DA-202-8-M 1 7/8 x 5 1/4 x 15/16 DA layer 3/16 1.775 KZ 111 1.693 KZ 115 TMPLATS DUAL-ACTIN The KICK-Z Dual-Action recoil absorbing pad combines two layers of Sorbothane. The first ultra-soft Sorbothane layer reacts to absorb recoil fast for increased accuracy. The second Sorbothane layer dissipates energy and completes maximum recoil absorption. Installation is easy just as it is with all KICK-Z recoil pads since they are made of solid Sorbothane, no hollow spots or metal plates to ever worry about!

KICK-Z PR-FIT RCIL PAD TMPLATS KICK-Z Sorbothane Pre-Fit Recoil Pads are designed to install easily on a wide variety SLIP-VR RCIL SYSTM TMPLATS of rifles and shotguns. Because manufacturers modify their stock dimensions, these templates are provided to help match the appropriate KICK-Z pad to a specific gun stock butt. Start by removing the current plate or pad from the stock butt. Then place the current plate, pad or gun stock over each template until a proper match is found. The template can be cut out and placed on gun stock to determine screw hole location. The model number of the chosen KICK-Z Recoil Pad is located on each template for easy purchase or ordering. Complete installation instructions can be found in each package and at www.kickeezproducts.com. > Most Pre-Fit Pads are 1.2 thick, except the KZ-115 and KZ-119. The KICK-Z SLIP-VR RCIL PAD is designed for all shooting applications and with 3 sizes, installation is easy. Sold separately, additional 1/4 and 1/2 inserts. Specifically engineered asy-fit design (3 sizes available) SLIP-VR 5.000 1.625 KZ 101 KICK-Z inserts can be used with any slip-on style recoil pad 5.000 asily adjust length-of-pull by adding or combining KICK-Z inserts KICK-Z inserts reduce more recoil and do it better than any other pad 1.625 KZ 102 5.175 Maximum recoil relief KICK-Z inserts can be used with ANY slip-on style recoil pad SLIP-VR RCIL PAD SIZ CHART SMALL FITS 4 1/2 x 1 1/2 up to 4 13/16 x 1 5/8 MDIUM FITS 4 13/16 x 1 5/8 up to 5 1/8 x 1 3/4 LARG FITS 5 1/8 x 1 3/4 up to 5 3/8 x 1 7/8 KICK-Z RCIL INSRTS KICK-Z Sorbothane RCIL INSRTS provide an additional layer of recoil protection. These inserts fit precisely into the KICK-Z SLIP-VR recoil pad... or they can easily be added to any of the most popular slip-on style recoil pads (trim to fit if needed). KICK-Z RCIL INSRTS are perfect for adjusting length-of-pull, 1.680 KZ 103 just add or combine inserts to modify your length-of-pull as needed.

KICK-Z PR-FIT KICK-Z pads are made of a revolutionary shock absorbing material called Sorbothane KICK-Z pads reduce more recoil and do it better than any other pad Less recoil reduces flinching, eases sore shoulders and cheeks By reducing the rebound effect of the first shot, second shots are quicker and more accurate Pad will not bottom out as other materials tend to do even after thousands of compressions KICK-Z recoil pads are made of solid Sorbothane, no hollow spots or metal plates to ever worry about! KICK-Z HAS A PR-FIT SRBTHAN RCIL PAD T FIT MST MDLS AND MANUFACTURS Due to manufacturer stock deviation, KICK-Z Recoil Pad Fit Charts are for reference only. KICK-Z Recoil Pads are also available in Grind-To-Fit BAIKAL Some Models Some Models Some Models BNLLI Super Black agle (12 ga. non-tactical) Sport 12 ga. M-1 Field (12 ga. non-tactical/most models) Montifeltro BRTTA All 5 Stocks nly All 5 3/8 Stocks nly BRWNING A-Bolt Medallion 93 (possible re-drill) BLR MDL 81 Bar Auto (1/4 cut required) Citori (some models/check template) Gold Auto A-Bolt A-Bolt New Short Mag Stalker Composite A-Bolt Citori nglish Stock 81 CVA Wolf Muzzleloader 96 FRANCHI Verimax 912 12 ga. Auto Composite 12 ga. Alcoine 12 ga. HARRINGTN/RICHARDS SB2-988 Slug Hunter ITHACA Model 37 (1970 s & older) Storm MARLIN Models 444, 450, 336 & 512 MSSBRG Model 550 Youth Model 500 AG Turkey 12 ga. Model 9200 & 9300 Model 835 2003 (mossy oak & real tree camo) Model 835 (most black stocks/no green, gray, or camo) Model 500 (most black stocks/no green, gray, or camo) Model 835 Camo (4 7/8 slotted screw pad) PARKR HAL 7mm Mag / / / / /Micro /Lam KZ-113 KZ-109 KZ-113 KZ-110 KZ-110 KZ-107 KZ-107 KZ-107 KZ-107 RMINGTN Model 700 Model 870 Wing Master (non-express) Model 870 Police Model 1187 SP 92 Model 700 ADL/BDL 4 15/16 flat stock Model 700 ADL/BDL 4 7/8 flat stock Model 7 Model 870 Youth (non-express) RUGR M77 Mkll Compact M77 M77 No.1 Red Label 79 / 80 KRLZ 1236 TIKKA T3 Most models (check templates) THMPSN CNTR ARMS Black Diamond ncore (check templates on newer models) mega Muzzleloader Black Diamond ncore (check templates on newer models) mega Muzzleloader Thunder Hawk 50 cal. SAVAG Mod 12/112 Mod 16/116 Post 1996 (most models) Most Models (check templates) STGR Most 12 ga. Models (check templates) Some Models (check templates) VRNA 20 ga. WATHRBY Vanguard WINCHSTR Supreme Select Sporting /U Model 1400 Model 670 Model 70 Featherweight Model 70 Model 70 (possible top end re-drill) Model 94 70 Carbine 30.06 Model 100 Super X-1 Model 88 Model 1300 Coyote Laminate Laminate KZ-117 KZ-119 KZ-102 KZ-102 KZ-102 KZ-101 KZ-101 KZ-101 KZ-116 KZ-118 KZ-115 KZ-110 KZ-113 KZ-114 PR-FIT CHART KICK-Z Pre-Fit Pads can be ground the same as our Grind-To-Fit Pads.