FH 230 SERIES FUEL PRO D IESEL F UEL F ILTRATION S YSTEM All-In-One Fuel Filter, Fuel- Water Separator and Fuel Heater Seeing is Believing Eliminates unnecessary changes and maintenance Extended filter change intervals Clear cover provides instant visual indication of filter life Quick change and easy disposal of filter element Bio Diesel compatible Equipped with Water-in-Fuel Sensor and Harness 5 year warranty on the housings - 2 years on electrical components For more information: Belgium +32 15 28 93 11 France +33 298 76 49 49 U.K. +44 1455 542 222 S. Africa +27 33 355 5815 The Fleetguard Fuel Pro uses the same long-life filter used in all Fleetguard Diesel Pro filters. Now you only need to stock a single filter part number for your fleet fuel systems and get extra long life from tight micron filters to meet your specific OEM requirements. Ordering information In addition to long filter life, Fuel Pro s StrataPore provides top rated water separation. Furthermore, there are filter pre-heater options to make sure your medium duty diesel engine keeps running longer in any season. Through a special gasket pack, all Fuel Pro units can be upgraded for Bio Diesel usage. Part-No. Filter Element Fuel 24VDC Housing (StrataPore) compatability Pre Heater Fluid Heater FH23067M 25 µm Regular Diesel yes - FH23068M 25 µm Regular Diesel - (1) - FH23069M 25 µm Regular Diesel yes yes (1) plugged ports available for 12 or 24 VDC Heater Thermostat
DIMENSIONS TYPICAL INSTALLATION 3.28 (83.3) Front 3.90 (99.1) Right Side Service Height 3.5 (88.9) 16.00 (406.4).97 (24.6) Transfer Pump Temperature Controlled Return Fuel for Fuel Heating FUEL IN 5.91 (150.0) Bottom 1/2-14 NPTF Fuel 6.58 Inlet (167.1) 3.46 (88.00) Diverter Cap for One-Filter Installations Fuel Tank Optional: Temperature Controlled Engine Coolant for Fuel Heating TECHNICAL SPECIFICATIONS Height Overall 409.7 mm (16.13") Depth Overall 184.1 mm (7.25") Width, max 175.0 mm (6.89") Mount Bracket Centers 150.1 mm (5.91") Weight (Dry) 3.9-4.4 kg Fuel Capacity (w/ filter) 1.9 litre Fuel Connection (Inlet) M22 x 1.5 Fuel Connection (Outlet) M22 x 1.5 Fluid Heat Connection (Inlet) M14 x 1.5 Fluid Heat Connection (Outlet) M14 x 1.5 Operation Fuel Flow Rate 681 litres/ hour Water Trap Capacity 1.0 litre Filter Replacement FS19765 EleMax StrataPore (25 micron) Bio Diesel gasket pack 1 3950445S Filter Service Clearance 88.9 mm (3.5") Electrical Heater 12 VDC, 250 W, 18 A ± 3 A 24 VDC, 250 W, 11 A ± 2 A LEDIndicator (12 & 24 VDC) 3946670S Collar Wrench 3944451S (plastic), 3944448S (metal) * Other filter options at different Micron Ratings are available. Specifications subject to change without notice. 1 All Fuel Pro units are suitable for use in a Bio Diesel environment. To make your Fuel Pro units Bio Diesel compatible, order the Bio Diesel gasket pack above and use it in conjunctionwith your EleMax filter element each time you replace it. FH 230 Series with FS 19765 (25µm) Filter element per SAE J905 Capacity vs Restriction Capacity (gms) FH 230 Series with FS 19765 (25µm) Filter element per SAE J905 Flow vs Restriction Fleetguard 2005 LI 33081GB Flow (l/min)
FH 232 SERIES DIESEL PRO D IESEL F UEL F ILTRATION S YSTEM All-In-One Fuel Filter, Fuel- Water Separator and Fuel Heater Seeing is Believing Eliminates unnecessary changes and maintenance Extended filter change intervals Clear cover provides instant visual indication of filter life Quick change and easy disposal of filter element Metric inlet/outlet ports Equipped with Water-in-Fuel Sensor and Harness 5 year warranty on the housings - 2 years on electrical components The FH232 Fuel Filtration system is the smaller unit of the DieselPro family with a fuel flow rate of 230l/ hour compared to the FH 233 (Fuel flow rate: 341l/hour) but offering the same advantages and benfits as its bigger brother. In addition to long filter life, Diesel Pro s StrataPore provides top rated water separation. Furthermore, there are filter preheater options to make sure your diesel engine keeps running longer in any season. Ordering information For more information: Belgium +32 15 28 93 11 France +33 298 76 49 49 U.K. +44 1455 542 222 S. Africa +27 33 355 5815 Part-No. Filter Element Fuel 24VDC Housing (StrataPore) compatability Pre Heater Fluid Heater FH23209M 25 µm Regular Diesel - (1) - FH23210M 25 µm Regular Diesel yes - FH23211M 25 µm Regular Diesel yes yes FH23212M 25 µm Bio Diesel - (1) - FH23213M 25 µm Bio Diesel yes - FH23214M 25 µm Bio Diesel yes yes (1) plugged ports available for 12 or 24 VDC Heater Thermostat
DIMENSIONS TYPICAL INSTALLATION To Fuel Injectors Fuel Pump Internal Check Valve 12 V Connection to Heater Thermoswitch Options: 120 V Preheater Fluid Heater Fuel Tank TECHNICAL SPECIFICATIONS Height Overall 356.6 mm (14.0") Depth Overall 150 mm (5.90") Width, Max. 159 mm (6.25") Mount Bracket Centers 133.4 mm (5.25") or Rear Mount Centers 76.2 mm (3.0") Weight (Dry) 2.2 kg Fuel Capacity (w/o filter) 0.45 litre Fuel Connections (Inlet) M16 x 1.5 Fuel Connection (Outlet) M16 x 1.5 Fluid Heat Connection (Inlet) M14 x 1.5 Fluid Heat Connection (Inlet) M14 x 1.5 Oper. Fuel Flow Rate 230 litres/hour Water Trap Capacity 0.32 litre Filter Replacement FS19785 StrataPore (25 micron) Bio Diesel gasket pack 1 3950444S Filter Service Clearance 88.9 mm (3.5") Mounting Bracket Cast in Head Electrical Heater 12 VDC,150 W, 13 A ± 3 A 24 VDC,150 W, 6.5 A ± 2 A LED indicator (12 & 24 VDC) 3946670S Collar Wrench 3944460S (plastic), 3945149S (metal) * Other filter options at different Micron Ratings available. Specifications subject to change without notice. 1 Each time you replace the filter element in a Bio Diesel unit, you also have to order the Bio Diesel gasket pack together with your replacement filter. FH 232 Series with FS 19785 (25 µm) Filter element per SAE J905 Capacity vs Restriction Capacity (gms) FH 232 Series with FS 19785 (25 µm) Filter element per SAE J905 Flow vs Restriction Fleetguard 2005 LI 33082GB Flow (l/min)
FH 233 SERIES DIESEL PRO D IESEL F UEL F ILTRATION S YSTEM All-In-One Fuel Filter, Fuel- Water Separator and Fuel Heater Seeing is Believing Eliminates unnecessary changes and maintenance Extended filter change intervals Clear cover provides instant visual indication of filter life Quick change and easy disposal of filter element Equipped with Water-in-Fuel Sensor and Harness 5 year warranty on the housings - 2 years on electrical components The Fleetguard Diesel Pro uses the same long-life filter used in all Fleetguard Fuel Pro filters. Now you can stock only one filter part number for your fleet fuel systems and get extra long life from tight micron filters to meet your specific OEM requirements. Ordering information In addition to long filter life, Diesel Pro s StrataPore provides top rated water separation. Furthermore, there are filter preheater options to make sure your medium duty diesel engine keeps running longer in any season. For more information: Belgium +32 15 28 93 11 France +33 298 76 49 49 U.K. +44 1455 542 222 S. Africa +27 33 355 5815 Part-No. Filter Element Fuel 24VDC Housing (StrataPore) compatability Pre Heater Fluid Heater FH23315M 25 µm Regular Diesel - (1) - FH23316M 25 µm Regular Diesel yes - FH23317M 25 µm Regular Diesel yes yes FH23318M 25 µm Bio Diesel - (1) - FH23319M 25 µm Bio Diesel yes - FH23320M 25 µm Bio Diesel yes yes (1) plugged ports available for 12 or 24 VDC Heater Thermostat
DIMENSIONS TYPCIAL INSTALLATION Front Back Service Height 3.5 (88.9) 4.29 (109.0) 9.29 (236.0).334 (8.48) (2 places).406 (10.31) (2 places).29 (7.4) 4.41 (112.0) 2.80 (71.0) To Fuel Injectors Fuel Pump Internal Check Valve 6.25 (159.0) Bottom 5.43 (138.0) 2.91 (74.0) 3.00 (76.2) 5.25 (133.4) 12 V Connection to Heater Thermoswitch Options: 120 V Preheater Fluid Heater Fuel Tank All dimensions are in inches (millimeters) TECHNICAL SPECIFICATIONS Height Overall 419 mm (16.5") Depth Overall 150 mm (5.90") Width, Max. 159 mm (6.25") Mount Bracket Centers 133.4 mm (5.25") or Rear Mount Centers 76.2 mm (3.0") Weight (Dry) 2.24 kg Fuel Capacity (w/o filter) 0.45 litre Fuel Connections (Inlet) M16 x 1.5 Fuel Connection (Outlet) M16 x 1.5 Fluid Heat Connection (Inlet) M14 x 1.5 Fluid Heat Connection (Oulet) M14 x 1.5 Operational Fuel Flow Rate 341 litres/ hour Water Trap Capacity 0.32 litre Filter Replacement FS19728 EleMax StrataPore (25 micron) Bio Diesel gasket pack 1 3950444S Filter Service Clearance 88.9 mm (3.5") Mounting Bracket Cast in Head Electrical Heater 12 VDC,150 W, 13 A ± 3 A 24 VDC,150 W, 6.5 A ± 2 A LED indicator (12 & 24 VDC) 3946670S Collar Wrench 3944460S (plastic), 3945149S (metal) * Other filter options at different Micron Ratings are available. Specifications subject to change without notice. 1 Each time you replace the filter element in a Bio Diesel unit, you also have to order the Bio Diesel gasket pack together with your replacement filter. FH 233 Series with FS 19728 (25 µm) Filter element per SAE J905 Capacity vs Restriction Capacity (gms) FH 233 Series with FS 19728 (25 µm) Filter element per SAE J905 Flow vs Restriction Fleetguard 2005 LI 33083GB Flow (l/min)
Filter Element Quick change, easy disposal Forged Aluminum Construction Anodized coating for extreme duty applications Dual Units FH234 Series Industrial Pro Diesel Fuel Filtration System Self Priming Port Just spin off the cap, pour in fuel and restart the engine with clean, filtered fuel Clear Cover See when NOT to change filters See fuel condition and flow Seeing is Believing Clear Water Bowl Drain Valve Clean operation Triplex Units Eliminate Unnecessary Changes & Maintenance Large capacity filter for extended life Extended filter change intervals Common filters with Fuel Pro FH230 Series Optional inlet / outlet fuel hose connection and routing locations Low restriction check valve eliminates loss of fuel prime when draining or changing the filter High fuel flow rates attainable by joining Industrial Pro units with adapter kits Water-In-Fuel (WIF) sensor is available Five Minute Filter Change Dry Filter Changes: Drain fuel below collar and replace No Fuel Spills: Removing standard filters full of fuel can be messy and hazardous Back-Up Emergency Provision: The Industrial Pro also accepts standard spin-on filters in an emergency Sturdy, quick-acting drain for water and contaminants Fuel Warmer Options Available with 12 or 24 V preheater Featuring StrataPore Maximum strength and durability Improved efficiency and longer life The best Fuel / Water Separation available Reduced restriction to flow Supports extended service intervals Maintains its Fuel / Water Separation efficiency over time Suggested Markets Oil & Gas Power Generation Construction / Mining Off-Road Stationary All-In-One Fuel Filter, Fuel / Water Separator and Fuel Heater
Fleetguard Family of Brands Housings Available Housing Part No. 0.35 (8.89) 3.34 (84.8) Fuel Flow (gph) Service Height 3.5 (88.9) 4.25 (107.9) Filter Type 19.01 (482.9) Max. Micron Rating Front Filter Part Number 3/4" NPTF Fuel Outlet 3/4" NPTF Fuel Inlet Bottom Plate Heat Drain WIF Fuel In & Fuel Fuel In & Out Out Port Single FH23400 200 Cartridge 7 FS19763 FG Bowl N/A Yes * Left or Right 3/4" NPT FH23402 200 Cartridge 7 FS19763 FG Bowl 12 V, 120 W DC Yes * Left or Right 3/4" NPT FH23401 200 Cartridge 7 FS19763 FG Bowl 24 V, 150 W DC Yes * Left or Right 3/4" NPT Double (No Shutoff Valve) and Duplex (Includes Shutoff Valve) FH23435 400 Cartridge 25 FS19765 FG Bowl N/A Yes * Tee 1" NPT FH23439 400 Cartridge 7 FS19763 FG Bowl N/A Yes * Tee 1" NPT FH23440 400 Cartridge 7 FS19763 FG Bowl N/A Yes * 4-Way Valve 1" NPT Triple (No Shutoff Valves) and Triplex (Includes Shutoff Valves) FH23441 600 Cartridge 7 FS19763 FG Bowl N/A Yes * Tee 1" NPT FH23438 600 Cartridge 7 FS19763 FG Bowl N/A Yes * 4-Way Valve 1" NPT * Water-In-Fuel sensor (WIF), part number 3911940 S, available separately Dimensions Adapter Kits Using Industrial Pro Adapter Kit (part number 3945216 S) you can join two Industrial Pro units to double the fuel flow rate to 400 gph (1515 lph) or join three units to triple the fuel flow rate to 600 gph (2272 lph). Each kit contains two adapters. To link two Industrial Pro units, choose an Industrial Pro Adapter Kit with Service (part number 3945960 S). Filter changes are performed with the engine running. 5.20 (132.1) 6.30 (160.0) Back 7.40 (188.0) 4.23 Max. (107.4) Typical Installation (install between the fuel tank and the transfer fuel pump) Injection Pump Bottom LT32574 - Rev 1 2004 Fleetguard Inc. Printed in the U.S.A. Visit www.fleetguard.com for more information on the Industrial Pro FH 234 Series: LT32575 - Industrial Pro FH234 Series Installation Instructions TB05/04-2 - Industrial Pro FH234 Series Technical Bulletin Specifications Secondary Fuel Filter (Replace with Diverter Cap) Fuel Tank Specification Single Unit Dual / Duplex Unit Triple / Triplex Unit Height Overall 19.01" (482.85 mm) 19.01" (482.85 mm) 19.01" (482.85 mm) Depth Overall 7.40" (188 mm) 7.40" (188 mm) 7.40" (736.6 mm) Width, Max. (w/ bracket) 6.30" (160.0 mm) 18.75" (476.3 mm) 29.00" (160.02 mm) Mount Bracket Centers Vertical 4.25" (108 mm) 6.75" (171.5 mm) 6.75" (171.5 mm) Horizontal 5.20" (132 mm) 157.5" (132 mm) 157.5" (132 mm) Weight (Dry) 17.7 lbs (6.6 kg) 41.4 lbs (15.5 kg) 64.1 lbs (23.9 kg) Fuel Capacity (w/o filter).37 gal (1400 ml).74 gal (2801 ml) 1.11 gal (4202 ml) Fuel Connections 3/4" NPTF 1" NPTF 1" NPTF Fuel Flow Rate 200 gph (757 lph) 400 gph (1515 lph) 600 gph (2272 lph) Recommended Appl. Heavy Duty Engines Heavy Duty Engines Heavy Duty Engines Water Trap Capacity 20.3 fl oz (600 ml) 40.6 fl oz (1200 ml) 60.9 fl oz (1800 ml) Filter Replacement FS19763* FS19763* FS19763* Filter Service Clearance Min. 3.5" (88.9 mm) Min. 3.5" (88.9 mm) Min. 3.5" (88.9 mm) Electrical Heater 12 VDC,150 W,13 A ± 3 A N/A N/A 24 VDC,150 W, 6.5 A ± 2 A * Fleetguard standard replacement filter element. Other filter options at different Micron Ratings are available. Specifications subject to change without notice. For more information, contact Customer Assistance at 1-800-22-FILTER (1-800-223-4583), fax 1-800-999-8664, or visit us at www.fleetguard.com