LS-208H II. HYLAB Series. Lattice Boom Crawler Crane 80-ton (77.62 mt)

LS-208H II HYLB Series Lattice Crawler Crane 80-ton (77.62 mt) The duty cycle crane with big horsepower, outstanding versatility and bullet-proof hydraulic controls 80-ton (77.57 mt) at 11' (3.35 m) radius 190' (57.91 m) of tube boom or 160' + 60' (48.77 m + 18.29 m) boom plus jib combination 150' (45.72 m) of angle boom or 140' + 60' (42.67 m + 18.29 m) boom plus jib combination Maximum tip height is 223' (67.97 m) for tube boom or 203' (61.87 m) for angle boom Dual swing drives 43,400 lbs (19 683 kg) maximum line pull 1" (25.4 mm) wire rope on front and rear hoist drums Large drum clutches and brakes 29,500 lbs (13 381 kg) drag/clam/magnet capacity for angle boom

LS-208H II HYLB Series robust performer in Link-Belt s renowned HYLB (hydraulic lattice boom) family, the LS-208H II is built for ultimate versatility on the job site. Duty cycle requirements? The LS-208H II is the machine for the job The tube boom is ideally suited for lift crane work and combination lift/duty cycle requirements. The angle boom is a top notch performer in dragline, clamshell, pile driving and other severe duty cycle applications. Outfitting the angle boom with the optional live mast makes for fast assembly and disassembly. The LS-208H II can operate in automatic brake mode or with true gravity freefall operation. The boom top section features standard pin-on points for attachment of the jib, a 5' (1.52 m) tip extension or a universal pile driving lead adapter. 5' (1.52 m) auxiliary tip extension is available to improve clearance between the working hoist lines (9-ton (8.16 mt) capacity). Head machinery options include wide mouth drag sheaves or lift/clam sheaves. Pile driving lead adapter available Optional third drum with free spooling Big horsepower for 80-ton class crane 263 horsepower (196 kw) High horsepower for 80-ton class crane allows for high line speeds under high line pull conditions such as production duty cycle work including drag line/clamshell/dock/scrap and foundation demands. Extra capacity cooling beyond normal lift crane requirements to satisfy the higher horsepower and hydraulic flows the LS-208H II provides. Dual swing drives Dual swing motors and drive boxes on the LS-208H II ensure long swing life under the harshest demands. What you ve come to expect from a Link-Belt Fine Inching control for super precise handling Compact travel drives, hydraulic selfadjusting tracks and sealed idler and drive planetaries High travel torque Service after the sale When you invest in a Link-Belt crane, you also invest in a 125-year legacy of outstanding customer support. Link-Belt s customer service helps you maintain your investment over the long term, with the industry s most comprehensive crane product support available. Link-Belt crawler crane owners praise HYLB s low operating cost... the best in its class. Crane operations control center rmchair mounted, pilot-operated hydraulic controls n ergonomically designed to provide maximum comfort, control and load visibility Outstanding transportability The modular design of the LS-208H II transports in only three loads. Link-Belt s optional Quick Draw feature simplifies self-assembly, disassembly and load-out. Hydraulic cylinders in the boom base section pick up and handle the boom sections and counterweights. On the LS-208H II, you can remove counterweights, break down the boom, retract the sideframes, store the catwalks, pin the live mast and gantry, and be ready to load out in 2-3 hours. Link-Belt Construction Equipment Company Lexington, Kentucky www.linkbelt.com Link-Belt is a registered trademark. Copyright 2000. ll rights reserved. We are constantly improving our products and therefore reserve the right to change designs and specifications. Litho in US 9/00 #4246

5436---0205---H8 1 Technical Data Specifications & Tube Capacities LS -208H II Crawler Crane 80 Ton (72.57 metric ton) CUTION: This material is supplied for reference use only. Operator must refer to in--- cab Crane Rating Manual and Operator s Manual to determine allowable crane lifting capacities and assembly and operating procedures. Link-Belt Cranes LS---208HII

5436---0205---H8 LS---208HII Link-Belt Cranes

5436---0205---H8 1 Table Of Contents Pages Specifications 1--8 Tube Capacities 1--12 Tube + Jib Capacities 1--16 Link-Belt Cranes LS---208HII

5436---0205---H8 This page intentionally left blank LS---208HII Link-Belt Cranes

Specifications Lattice Crawler Crane LS 208H II 80 ton (72.57 metric ton) HYLB Series LS 208H II

LS 208H II Machine Transport Weights approximate LS 208H II

LS 208H II Transportation Weights approximate Base Machine: Rigid Backstops, 27 Gallons (102.2L) of Fuel, Catwalks (front and right side), 24 (7.3m) Live Mast, Bridle & Spreader Bar, 14 Part Hoist Reeving, 610 (186 m) of Type DB Front Hoist Rope, 540 (165m) of Type RB Rear Hoist Rope and uxiliary Lifting Bail. Gross Weight Item Description lb. kg. #1 Base Machine 92,094 41 773 1 Transport s #2 #3 Notes and Summary dd Counterweight 19,600 8 890 1 Numbers in the load columns to the left represent quantities. dd B Counterweight 20,100 9 117 1 dd Hydraulic Third Drum w/o rope 1,345 610 Estimated transport load dd 20 (6.1m) Tube Base Section 1,790 812 assumes the load out consist of dd 20 (6.1m) Tube Top Section 2,700 1 225 150 (45.7m) of angle boom + 60 (18.3m) of jib with full dd 10 (3.05m) Tubular Extension w/pins & pendants 677 307 counterweight. dd 20 (6.1m) Tubular Extension w/pins & pendants 1076 488 dd 30 (9.1m) Tubular Extension w/pins & pendants 1,481 672 Support loads were targeted at dd 20 (6.1m) Base Section 2,853 1 294 1 45,000 lb (20 412kg), 8 6 (2.6m) wide, 48 (14.6m) long, dd 20 (6.1m) Top Section with 4 Lifting Sheaves 3,195 1 449 1 and 13 6 (4.1m) high using a dd 20 (6.1m) Top Section with 3 Lifting Sheaves 3,642 1 652 drop deck trailer. This may vary dd 20 (6.1m) Top Section with 2 Lifting Sheaves 3,475 1 576 depending on state laws, empty truck/trailer weights, and style dd 10 (3.05m) ngular Extension w/pins & pendants 992 450 1 of trailer. dd 20 (6.1m) ngular Extension w/pins & pendants 1,625 737 2 dd 30 (9.1m) ngular Extension w/pins & pendants 2,264 1 027 2 Estimated weights vary by dd Bridle & Spreader Bar Only (No Live Mast) 756 343 +/ 2%. dd Tagline Winder 650 295 Estimated Total of #1 dd Fairleader 500 227 92,094 lbs. (41 773kg). dd PT DS 350 100 45 Estimated Total of #2 dd 30 (9.1m) Tubular Jib 1,683 763 1 29,641 lbs. (13 445kg). dd 15 (4.6m) Tubular Jib Extension 317 144 2 dd 5 (1.5m) uxiliary Tip Extension 730 331 Estimated Total of #3 dd Holding Rope 1 X 190 Type DB 334 152 29,504 lbs (13 383kg). dd Closing Rope 1 X 240 Type DB 422 192 dd Inhaul Rope 1 X 105 Type M 185 84 dd Jib Wire Rope 1 X 700 Type DB 1,295 587 dd 3rd Drum Wire Rope 0.63 X 385 Type ZB 312 141 dd 3rd Drum Wire Rope 0.63 X 385 Type WB 296 134 dd uxiliary Lifting Bail 191 87 dd 15 ton (13.6mt) Hook Ball Non Swivel 750 340 1 dd 15 ton (13.6mt) Hook Ball Swivel 760 345 dd 80 ton (72.6mt) 4 Sheave Hook Block 1,560 708 1 Remove Front Hoist Rope 1 X 610 Type DB 1,147 520 Remove Jib Wire Rope 1 X 540 Type RB 1,080 490 Remove 24 (7.3m) Live Mast with Bridle & Spreader Bar 2,356 1 069 dd 50 gallons (189.3L) of Fuel 362 164 Machine Working Weight Option Description Gross Weight lbs. (kg) 1 Base Machine equipped with 40 (12.2m) of tubular boom, live mast, counterweight, 610 (186m) front hoist rope, 540 (164.6m) rear hoist rope, 80 ton (72.6mt) hook block, 77 gallons (291.4L) of fuel, and 200 lbs. (90.7kg) operator. 2 Option #1 plus B counterweight, midpoint pendants, and 150 (45.7m) of boom extensions to obtain 190 (57.91m) of main boom. 3 Option #2 plus 60 (18.3m) of jib and 15 ton (13.6mt) hookball subtract 20 (6.1m) of boom extension and midpoint pendants to obtain maximum 170 + 60 (51.82 + 18.29m) of main boom + jib. 4 Base Machine equipped with 40 (12.2m) of angle boom, live mast, counterweight, 610 (186m) front hoist rope, 540 (165m) rear hoist rope, 80 ton (72.6mt) hook block, 77 gallons (291.4L) of fuel, and 200 lbs. (90.7kg) operator. 117,291 (53 202) 145,355 (65 932) 147,060 (66 705) 118,849 (53 909) 5 Option #4 plus B counterweight and 110 (33.5m) of boom extensions to obtain 150 (45.7m) of main boom. 147,719 (67 004) 6 Option #5 plus 60 (18.3m) of jib and 15 ton (13.6mt) hookball to obtain maximum 150 + 60 (45.7 + 18.3m) of main boom + jib. Notes: 1. Ground bearing pressure is based on the total weight distributed evenly over the track contact area. 2. Total contact area for 36 (0.91m) track shoes is 15,689 in 2 (101,219cm 2 ). 150,787 (68 396) Ground Bearing Pressure psi (kg/cm 2 ) 7.48 (0.52) 9.26 (0.65) 9.37 (0.66) 7.58 (0.53) 9.42 (0.66) 9.61 (0.67) 3 LS 208H II

ttachment Options 40 190 (12.2 57.9m) Tube Basic Tube 40 (12.2m) two piece design that utilizes a 20 (6.1m) base section and a 20 (6.1m) open throat top section with in line connecting pins on 54 (1.4m) wide and 44 (1.1m) deep centers. feet on 50 (1.3m) centers 3 (76.2mm) diameter chords Lugs on base section to attach carrying links Skywalk platform Deflector roller on top section Permanent skid pads mounted on top section to protect head machinery Rigid sheave guards Five 18 (0.5m) root diameter steel sheaves mounted on sealed anti friction bearings Mechanical boom angle indicator Tube Extensions Suggested Quantity for Max. 10 (3.05m) 1 20 (6.10m) 1 30 (9.14m) 4 Deflector roller on top of each section ppropriate length pendants Maximum tube boom tip height of 193 (58.8m) 40 150 (12.2 45.7m) Basic 40 (12.2m) two piece design that utilizes a 20 (6.1m) base section and a 20 (6.1m) open throat top section with in line connecting pins. extensions are 48 (1.2m) wide and 48 (1.2m) deep at outside dimensions of angles. feet on 50 (1.3m) centers 4 X 4 X 0.38 (101.6 x 101.6x 9.5mm) angle chords Lugs on base section to attach carrying links Skywalk platform Deflector roller on top section Permanent skid pads mounted on top section to protect head machinery Rigid sheave guards Four 18 (0.5m) root diameter steel sheaves mounted on sealed anti friction bearings Mechanical boom angle indicator Extensions Suggested Quantity for Max. 10 (3.05m) 1 20 (6.10m) 2 30 (9.14m) 2 Deflector roller on top of each section ppropriate length pendants Maximum angle boom tip height of 154 (46.9m) 30 60 (9.1 18.3m) Tube Jib Basic Tube Jib 30 (9.14m) two piece design that utilizes a 15 (4.6m) base section and a 15 (4.6m) top section with in line connecting pins on 32 (0.8m) wide and 24 (0.6m) deep centers. 2 (50.8mm) diameter tubular chords One 18.5 (0.46m) root diameter steel sheave mounted on sealed anti friction bearings. 15 (4.6m) jib extensions provide jib lengths at 45 (13.76m) and 60 (18.3m) Jib offset angles at 5, 15 and 25 degrees Maximum tip height of boom + jib is 233 (71.02m) using the tube boom and 214 (65.23m) using the angle boom uxiliary 5 (1.5m) Tip Extension Designed to use instead of a jib to provide clearance between working hoist lines. The extension is equipped with a single 15.25 (0.4m) root diameter steel sheave mounted on sealed anti friction bearings. Maximum capacity is 9 ton (8.2mt). Hoist System Designed to lift off maximum boom or maximum boom plus jib unassisted. Operates up to a maximum boom angle of 82 degrees. utomatically limits maximum boom angle operation. Retractable gantry frame Pin on bail frame 14 part reeving with 5/8 (14.7mm) type C wire rope Bridle assembly 24 (7.3m) live mast (optional for angle attachment) Two 1.25 (31.8mm) pendants Tubular boom backstops (rigid type) Sheaves contain sealed anti friction bearings speed from 10 70 is 52 seconds with no load and 94 seconds with full load. Speed was determined using 100 (30.5m) of tube boom LS 208H II

Revolving Upperstructure Frame ll welded steel frame with precision machined surfaces for mating parts. Engine Mitsubishi 6D24 TEB with oil cooler, air cleaner, fuel filter, water separator, hour meter, tachometer, and electrical shutdown. Number of cylinders 6 Bore and stroke in (mm) Piston displacement in 3 (cm 3 ) 5.12 x 5.91 (130 x 150) 729 (11945) Engine rpm at full load speed 2,000 Hi idle rpm 2,200 Full load speed horsepower (kw) 263 (196) Peak torque ft lb (joule) 746 (1011) Peak torque rpm 1,400 Electrical system Batteries 24 volt 2 12 volt Hydraulic System Specifications Hydraulic Pumps The pump arrangement is designed to provide hydraulically powered functions allowing positive, precise control with independent or simultaneous operation of all crane functions. Two variable displacement pumps operating at 4,000 psi (281kg/cm 2 ) and 64 gal/min (243L/min) powers load hoist drums, boom hoist drum, optional third drum, and travel. One fixed displacement gear type pump operating at 3,600 psi (250kg/cm 2 ) and 31 gal/min (117L/min) powers the swing and treadmember retract cylinders. One fixed diplacement gear type pump operating at 3,000 psi (210kg/cm 2 ) and 35 gal/min (130L/min) powers the swing motor. One fixed displacement gear type pump operating at 1,200 psi (84.4kg/ cm 2 ) and 10.5 gal/min (39.7L/min) powers the pilot control system, clutches, brakes and pump controls. Hoist Drums Each drum contains a pilot controlled, bi directional, axial piston motor and a planetary gear reduction unit to provide positive control under all load conditions. Power up/down & free fall operation modes utomatic brake mode (spring applied, hydraulically released, band type brake) 1 (25.4mm) grooved lagging Drum pawl controlled manually Electronic drum rotation indicators Mounted on anti friction bearings 18.70 (0.47m) root diameter 33.86 (0.86m) flange diameter 20.47 (0.52m) width Optional Front Mounted Third Hoist Drum The hydraulic winch is pinned to the front of the upper frame and is used in conjunction with a fleeting sheave and 3 sheave idler assembly to run the wire rope over the boom top section. Free spooling capability for pile driving applications 10.63 (0.27m) root diameter 20 (0.51m) flange diameter 13.5 (0.34m) width Mounted on anti friction bearings Hoist Drum Contains a pilot controlled, bi directional, axial piston motor and a planetary gear reduction unit to provide positive control under all load conditions. Spring applied, hydraulically released, disc type brake controlled automatically 5/8 (15.88mm) grooved lagging Drum pawl controlled manually Mounted on anti friction bearings 10.71 (0.27m) root diameter 23.62 (0.60m) flange diameter 10.23 (0.26m) width Swing System Mechanical linkage controls the dual bi directional axial piston motors and the planetary gear reduction unit to provide positive control under all load conditions. Spring applied, hydraulically released, 360 degree multi plate brake Free swing mode when lever is in neutral position Two position positive house lock udio/visual swing alarm Maximum swing speed is 3.0 rpm Upper Counterweight Consist of a two piece design that can be easily lowered to the ground using the gantry. 19,600 lbs. (8 890kg) upper counterweight 20,100 lbs. (9 117kg) B upper counterweight can be added to maximize capacities Operator s Cab and Controls Fully enclosed modular steel compartment is independently mounted and insulated to protect against vibration and noise. ll tinted/tempered safety glass Sliding entry door and front window Swing up roof window with wiper Door and window locks Heater with circulating fan ir conditioner Sun visor Engine instrumentation panel (tachometer, voltmeter, engine oil pressure, engine water temperature, fuel level, hydraulic oil temperature, and service monitor system) Electronic drum rotation indicators Six way adjustable seat with seat belt Dry chemical fire extinguisher Hand and foot throttle Fully adjustable single axis control levers Swing lever with swing brake and horn located on handle Bubble type level 5 (continued on page 7) LS 208H II

LS 208H II Hoisting Performance vailable line speed and line pull based on Mitsubishi 6D24 TEB at 2,000 rpm full load speed. Line pulls are not based on wire rope strength. See Wire Rope Capacity Chart for maximum permissible single part of line working loads. Rope Layer Front or Rear Drum 1 (25.4 mm) Wire Rope Maximum Line Pull No Line Speed Full Line Speed Pitch Diameter Layer Total lb kg ft/min m/min ft/min m/min in mm ft m ft m 1 43,394 19 683 184 56 92 28 19.7 500 96 29 96 29 2 39,395 17 869 203 62 101 31 21.7 551 105 32 201 61 3 36,070 16 361 221 67 111 34 23.7 602 115 35 316 96 4 33,263 15 088 240 73 120 36 25.7 653 125 38 441 134 5 30,862 13 999 259 79 129 39 27.7 703 135 41 576 176 6 28,784 13 056 277 84 138 42 29.7 754 144 44 720 219 7 26,968 12 232 296 90 148 45 31.7 805 154 47 875 267 Rope Layer Hoist Drum 5/8 (15.9mm) Wire Rope Maximum Line Pull No Line Speed Full Line Speed Pitch Diameter Layer Total lb kg ft/min m/min ft/min m/min in mm ft m ft m 1 18 623 8 447 209 63.8 108 33.0 11.3 288 44 13.3 44 13.3 2 16 761 7 603 233 70.9 120 36.3 12.6 320 48 14.8 92 28.1 3 15 237 6 912 256 78.0 132 40.3 13.9 352 53 16.2 145 44.3 4 13 967 6 336 279 85.1 144 44.0 15.1 384 58 17.7 203 62.0 5 12 893 5 848 302 92.2 156 47.6 16.4 416 63 19.2 266 81.2 6 11 972 5 430 326 99.3 168 51.3 17.6 448 68 20.7 334 101.9 7 11 174 5 068 349 106.4 180 55.0 18.9 480 73 22.2 407 124.0 8 10 476 4 752 372 113.5 192 58.6 20.2 512 77 23.6 484 147.7 Rope Layer Front Mounted Third Drum 5/8 (15.9mm) Wire Rope Maximum Line Pull No Line Speed Full Line Speed Pitch Diameter Layer Total lb kg ft/min m/min ft/min m/min in mm ft m ft m 1 15,041 6 822 157 48 143 44 11.25 286 57 17 57 17 2 13,537 6 140 175 53 159 48 12.50 318 64 20 121 37 3 12,307 5 582 192 59 175 53 13.75 349 71 22 192 59 4 11,282 5 117 210 64 191 58 15.00 381 77 23 269 82 5 10,414 4 724 228 69 207 63 16.25 413 83 25 352 107 6 9,671 4 387 245 75 223 68 17.50 445 90 27 442 135 Wire Rope pplication Diameter Length Type Maximum Permissible in mm ft m lb kg Hoist 5/8 15.9 610 186 C 14,500 6 577 Front Hoist 1 25.4 620 189 DB 29,500 13 380 Rear Hoist (Optional) 1 25.4 540 165 RB 22,700 10 297 Rear Hoist (Optional) 1 25.4 700 213 DB 29,500 13 380 Third Drum (Optional) 5/8 15.9 385 117 ZB 11,080 5 026 Third Drum (Optional) 5/8 15.9 385 117 WB 13,650 6 192 Rope Type Description DB 6 x 26 (6 X 19 Class) Warrington Seale Extra Improved Plow Steel Preformed Right Lay Regular Lay I.W.R.C. RB* 19 x 19 Rotation Resistant Extra Improved Plow Steel Preformed Right Lay Regular Lay Swaged SF=5.1 ZB 36 x 7 Non rotating Extra Improved Plow Steel Right Lay Regular Lay S.F.=5.1 WB 8 Strand Regular Lay C 9 x 40 Strand, Post Formed, Swaged Constructex Crush Resistant * Use of swivel ball is not recommended. LS 208H II

Revolving Upperstructure (continued from page 5) Indicator/ Rated Capacity Limiter Standard Equipment PT EI 65 load indicator provides two lineriders, angle sensor, computer, display, and anti two block equipment to provide the following information. length & angle Jib length & angle on hook radius Tip height nti two block warning & function limiters Operation mode Operator settable alarms provide audio/visual warning Provides an audio/visual warning when the load on hook is within 90% of the cranes rated load. Provides an audio/visual warning and limits functions when the load on hook is at 100% of the cranes rated load. dditional Equipment Standard 57.9 (1.5m) outside diameter turntable bearing Front, right, & left side removable catwalks 77 gal (291.5L) fuel tank (usable quantity) Machine lifting links dditional Equipment Optional Rud o matic model 1248 tagline winder for angle boom (double barrel, spring wound, drum type) Rud o matic model 648 tagline winder for tube boom Full revolving type Fairleader with barrel, sheaves, and guide rollers Lower Structure Lower Frame ll welded box construction frame with precision machined surfaces for turntable bearing and rotating joint. 8 10.7 (2.7m) overall width 11 11 (3.6m) overall length Treadmembers ll welded, precision machined, steel frames can be hydraulically extended and retracted by a hydraulic cylinder mounted in the lower frame. 14 (4.3m) extended gauge 8 11 (2.7m) retracted gauge 20 2 (6.2m) overall length 36 (0.9m) wide track shoes 11 sealed (oil filled) track rollers per treadmember Sealed (oil filled) idler and drive sprockets Compact travel drives Hydraulic self adjusting tracks Individual control provides smooth, precise maneuverability including full counter rotation Spring applied, hydraulically released disc type brake controlled automatically Maximum travel speed is 1.0 mph (1.6km/h) in high speed and 0.6 mph (1km/h) in low speed Designed to 30% gradeability 7 LS 208H II

Link Belt Construction Equipment Company Lexington, Kentucky www.linkbelt.com Link Belt is a registered trademark. Copyright 2005. We are constantly improving our products and therefore reserve the right to change designs and specifications. LS 208H II

Lifting Capacities Hydraulic Lattice Crawler Crane LS 208H II Tube Capacities 40 190 ft. (12.2 57.9 m) 80 ton (72.6 metric ton) 24 (7.31m) Live Mast Extended/Retracted 5 (1.52m) Tip Extension Duty Cycle Capacities 40 70 (12.2 21.3 m) Tube Extended Dragline with Counterweight Clamshell with Counterweight Tube Capacities 40 190 (12.19 57.9 m) Tube 54 (1.4 m) Wide x 44 (1.1 m) Deep 20 (6.10 m) Open Throat Top Section Extended / Retracted Blocked Capacities B,, or 0 Counterweight Options 20 2 (6.15 m) Crawler Length LS 208H II CUTION: This material is supplied for reference use only. Operator must refer to in cab Crane Rating Manual to determine allowable machine lifting capacities and operating procedures.

LS 208H OPERTING INSTRUCTIONS GENERL: 1. Rated lifting capacities in pounds as shown on lift charts pertain to this crane as originally manufactured and normally equipped. Modifications to the crane or use of optional equipment other than that specified can result in a reduction of capacity. 2. Construction equipment can be dangerous if improperly operated or maintained. Operation and maintenance of this crane must be in compliance with the information in the Operator s, Parts, and Safety Manuals supplied with this crane. If these manuals are missing, order replacements through the distributor. 3. The operator and other personnel associated with this crane shall read and fully understand the latest applicable merican National Standards Institute (NSI) safety standards for cranes. 4. ll capacities listed in this book are in compliance with SME/NSI B30.5. LIFT CRNE OPERTION: 1. Capacities shown are in pounds and are not more than 75% of the tipping loads with the crane standing level on firm supporting surface. deduction must be made from these capacities for weight of hook block, hook ball, sling, grapple, etc. When using main hook while jib is attached, reduce capacities by values shown on Capacity Deductions For Lifting Off Main Hook With Jib Installed. When using main hook while 5 foot tip extension is attached, reduce capacities by values shown on Capacity Deductions For Lifting Off Main Hook With 5 foot Tip Extension Installed. See Operator s Manual for all limitations when raising or lowering attachment. 2. The crane capacities in the shaded areas are based on structural strength. The crane capacities in the non shaded areas are based on stability. 3. For recommended reeving, parts of line, wire rope type, and wire rope inspection, see Wire Rope Capacity chart, Operator s Manual, and Parts Manual. Rated lifting capacities are based on correct reeving. Deduction must be made for excessive reeving. ny reeving over minimum required (see Wire Rope Capacity Chart) is considered excessive and must be accounted for when making lifts. Use working range diagram to estimate the extra feet of rope then deduct 1.9 lb. for each extra foot of wire rope before attempting to lift a load. 4. ratings in this Crane Rating Manual are based on freely suspended loads and make no allowances for such factors as the effect of ground conditions, and operating speeds. The operator shall therefore reduce load ratings in order to take these conditions into account. 5. Rated lifting capacities do not account for the effects of wind on a suspended load or boom. Lifting capacities should be considered acceptable for wind speeds less than 20 mph and appropriately reduced for wind speeds greater than 20 mph. Extreme caution should be used when lifting heavy loads or loads with large wind sail area under high wind conditions (over 20 mph). 6. The capacities listed in this Crane Rating Manual are for the machine with live mast, with the gantry in the raised position. 7. The least stable rated condition is over the side. 8. s should be erected and lowered over the end for maximum stability. See Liftoff Capabilities before erecting or lowering boom. 9. Do not operate at radii and boom lengths where the Crane Rating Manual lists no capacity. Do not use longer booms or jibs than those listed in this Crane Rating Manual. ny of the above can cause a tipping condition, or boom and jib failure. 10. These capacities apply only to the crane as originally manufactured and normally equipped by Link Belt Construction Equipment Company. FOR OVER END BLOCKED CPCITIES ONLY 1. These capacities can be lifted over either end with the crane standing level on a firm supporting surface with adequate blocking placed under the tread member sprockets/idlers, to prevent rocking. 2. Do not travel with a load. TRVELING WITH LOD: 1. ll 360 Rotation Capacities listed in this Crane Rating Manual are pick and carry capacities. 2. The boom must be pointing straight over one end of the crawler lower. If the load was lifted over the side, swing the load over the end and/or if the load was lifted at a long radius and the load is at or near capacity for that radius, boom up to obtain a greater lifting capacity before beginning travel. 3. Engage the swing lock and apply swing brake. 4. Travel slowly and cautiously on a firm and level supporting surface. DEFINITIONS: 1. : Horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of the vertical hoist line or tackle with load applied. 2. : The angle between the boom base section and horizontal with freely suspended load at the rated radius. 3. Working rea: rea measured in a circular arc about the centerline of rotation as shown on the Working rea Diagram. 4. Freely Suspended : hanging free with no direct external force applied except by the hoist line. 5. Side : Horizontal side force applied to the lifted load either on the ground or in the air.

WIRE ROPE CPCITY 1 5/8 Parts of Type Type Type Type Type Line M DB RB ZB WB 1 29,500 29,500 22,700 * 11,000 13,600 * 2 59,000 59,000 45,500 22,000 27,200 3 88,500 88,500 68,100 33,000 40,800 4 118,000 118,000 90,800 44,000 54,620 5 147,500 147,500 113,500 55,000 68,000 6 177,000 177,000 136,200 66,000 81,600 7 206,500 206,500 158,900 77,000 95,200 8 236,000 236,000 181,600 88,000 108,800 LBCE Type DB RB* ZB WB* M Description Notes Capacities shown are in pounds and working loads must not exceed the ratings on the capacity charts in this Crane Rating Manual. Study Operator s Manual for wire rope inspection procedures. 6 x 26 (6 x 19 Class) Warrington Seale Extra Improved Plow Steel Preformed Right Lay Regular Lay I.W.R.C. 19 x 19 Rotation Resistant Extra Extra Improved Plow Steel Preformed Right Lay Regular Lay. Swaged S.F. = 5:1 36 x 7 Class Non Rotating Extra Improved Plow Steel Right Lay Regular Lay S.F. = 5:1 8 Strand Regular Lay 6 X 19 Class Extra Improved Plow Steel Lang Lay * Use of swivel end with 1 part of line is not recommended. WORKING RES 360 LIFTOFF CPBILITIES / Over Side (Gantry In Raised Position) Counterweight () Maximum Maximum + Jib NO (RETRCTED) NO (EXTENDED) (RETRCTED) (EXTENDED) B (EXTENDED) See Note 4 100 N/ 120 N/ 130 N/ 160 N/ 190 170+60 180+45 See Note 4 1. For maximum stability, booms should be erected or lowered over the end with no load and with the hook block on the ground. 2. Crane on firm and level surface. 3. Gantry pins must be installed with the gantry in the raised position. 4. Liftoff over end only with 170 ft.+ 45 ft., 170 ft. + 60 ft., 180 ft. + 30 ft. and 180 ft. + 45 ft. boom. For 170 ft. + 45 ft., 170 ft. + 60 ft., 180 ft. + 30 ft. or 180 ft. + 45 ft. (side frame extended) with B counterweight only, adequate blocking must be placed under both tread member sprockets (or idler rollers) at the end that the boom is to be lifted off to prevent rocking. The ramps supplied with the crane are consid ered to be adequate blocking. Over Side See Note Over Idler End Longitudinal Of Crawler Center Of Rotation Over Drive End Idler Sprocket See Note Drive Sprocket Over Side Note: These Lines Determine The Limiting Position Of ny For Operation Within Working reas Indicated. LS 208H

LIVE MST LIFTING CPCITIES (WITHOUT COUNTERWEIGHT INSTLLED) Live Mast Extended Retracted 10 73.7 60,000 60,000 11 71.2 60,000 51,600 12 68.7 60,000 44,600 13 66.1 60,000 39,200 14 63.5 60,000 34,900 15 60.8 59,400 31,500 16 58.0 52,700 28,600 17 55.1 47,400 26,200 18 52.2 43,000 24,200 19 49.1 39,300 22,500 20 45.8 36,200 20,900 21 42.4 33,500 19,600 22 38.8 31,200 18,400 23 34.8 29,200 17,300 24 30.3 27,400 16,400 NOTES: 1. Refer to the Operator s Manual. 2. Live mast backstops must be in position and operative. 3. Use rear hoist drum only. Reeve hoist line to drum over live mast cross member. 4. Reeve hoist rope with three (3) parts of 1 diameter wire rope. 5. The crane shall be leveled on a firm supporting surface. 6. 7. See Crane ssembly Component Weights chart for weight of compo nents for crane assembly. 8. Rated capacities for 360 rotation. 9. Gantry can be either in the raised or lowered position when liftin loads with the live mast. When the gantry is in the lowered position the back stay links must be pinned. Do not unpin the backstay links with the gantry in the lowered position, until the live mast is lowered and supported. 10. Do not lower live mast below 3 angle with gantry in lowered position. LS 208H

1. The capacities included in the Duty Cycle Capacities Tube chart are the maximum allowable, and are based on an LS 208H II crawler crane with a (19,800 lbs.) counterweight, stand ing level on firm suporting surface under ideal job conditions. 2. Capacities are based on 75% of minimum tipping loads for dragline, 67.5% for clamshell. 3. Capacities are maximum recommended by PCS Standard #4. Operator must make allowances for soft or uneven supporting sur faces, rapid cycle operations, bucket suction, or other unfavorable conditions which may require smaller buckets for most efficient operation. 4. Weight of bucket plus load, must not exceed these capacities. 5. Dragline operation is not recommended with boom angles less than 35. 6. length for dragline/clamshell attachment operation should not exceed 70 ft. 7. Retractable high gantry must be fixed in raised position for all capacities on the Duty Cycle Capacities Tube chart. 8. These capacities apply to the machine as originally manufactured and normally equipped by Link Belt Construction Equipment Company. Length Extended Counterweight (ll capacities listed are in pounds) Dragline Clamshell / Magnet 40 9 81.8 15,800 40 10 80.3 15,800 40 11 78.9 15,800 40 12 77.4 15,800 40 13 75.9 15,800 40 14 74.5 15,800 40 15 73.0 15,800 40 16 71.5 15,800 40 17 69.9 15,800 40 18 68.4 15,800 40 19 66.9 15,800 40 20 65.3 15,800 40 25 57.1 15,800 15,800 40 30 48.1 15,800 15,800 40 35 37.5 15,800 15,800 40 40 23.4 15,800 50 11 81.1 15,800 50 12 80.0 15,800 50 13 78.8 15,800 50 14 77.6 15,800 50 15 76.4 15,800 50 16 75.3 15,800 50 17 74.1 15,800 50 18 72.9 15,800 50 19 71.7 15,800 50 20 70.5 15,800 50 25 64.3 15,800 50 30 57.7 15,800 15,800 50 35 50.6 15,800 15,800 50 40 42.7 15,800 15,800 50 50 20.9 13,900 Length Extended Counterweight (ll capacities listed are in pounds) Dragline Clamshell / Magnet 60 12 81.6 15,800 60 13 80.7 15,800 60 14 79.7 15,800 60 15 78.7 15,800 60 16 77.8 15,800 60 17 76.8 15,800 60 18 75.8 15,800 60 19 74.8 15,800 60 20 73.8 15,800 60 25 68.8 15,800 60 30 63.6 15,800 60 35 58.1 15,800 15,800 60 40 52.3 15,800 15,800 60 50 38.9 15,800 13,900 60 60 19.0 10,700 70 14 81.2 15,800 70 15 80.4 15,800 70 16 79.5 15,800 70 17 78.7 15,800 70 18 77.9 15,800 70 19 77.0 15,800 70 20 76.2 15,800 70 25 71.9 15,800 70 30 67.6 15,800 70 35 63.1 15,800 70 40 58.4 15,800 15,800 70 50 48.1 15,500 13,900 70 60 35.9 11,900 10,700 70 70 17.6 8,400 LS 208H

WORKING RNGE DIGRM in feet above ground 200 190 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 10 20 Minimum See Note 2. 30 40 50 0 240 220 200 180 160 140 120 100 80 60 40 20 10 60 70 80 Maximum See Note 2. 190 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 Main Length Operating radius from centerline of rotation in feet C L OF ROTTION LS 208H

CPCITY DEDUCTIONS FOR LIFTING OFF MIN BOOM HOOK WITH JIB INSTLLED When using main boom hook, while jib is attached, reduce boom capacities by the values in the following chart: Jib Length Capacity Deduction 30 2,000 45 2,400 60 3,200 CPCITY DEDUCTIONS FOR LIFTING OFF MIN BOOM HOOK WITH 5 FOOT TIP EXTENSION INSTLLED MXIMUM LLOWBLE CPCITIES FOR 5 FOOT TIP EXTENSION LIFTING CPCITY TO BE THE SMLLEST OF THE FOLLOWING VLUES: 1. 18,000 lb (Maximum). 2 The standard crane lift capacity minus 1,100 lb for the boom length, tip extension load radius, and counterweight configura tion in use on the crane. NOTES: 1. ll notes are to be adhered to as listed on the standard lift crane capacity charts. 2. Reduce the main boom lift capacities by 1,100 lb when the tip extension is installed. 3. The maximum boom length on which the tip extension can be installed is 190 ft. 4. Do not lift or suspend a load from the boom tip extension and main boom at the same time. When using main boom hook, while 5 foot tip extension is attached, reduce boom capacities by the values in the following chart: Tip Extension Capacity Deduction 5 1,100 LS 208H

B (Ft.) MIN BOOM CPCITIES 40 FT OPEN THROT TUBE BOOM Over End Blocked B B Extended 360 Rotation 0 Retracted 0 9 81.8 160,000 160,000 160,000 160,000 131,900 80,800 10 80.3 160,000 160,000 160,000 153,200 107,600 65,700 11 78.9 160,000 160,000 153,800 128,500 90,700 55,200 12 77.4 156,100 156,100 141,800 102,600 78,200 47,500 13 75.9 144,800 144,800 129,400 85,200 68,700 41,500 14 74.5 135,000 135,000 110,700 72,700 61,200 36,900 15 73.0 126,400 126,400 96,600 63,300 55,100 33,100 16 71.5 118,800 118,200 85,600 56,000 50,100 29,900 17 69.9 112,100 106,200 76,800 50,100 45,800 27,300 18 68.4 106,000 96,300 69,600 45,300 42,200 25,100 19 66.9 100,600 88,100 63,500 41,300 39,100 23,100 20 65.3 95,700 81,100 58,400 37,900 36,400 21,400 25 57.1 71,400 57,800 41,400 26,500 26,700 15,400 30 48.1 54,100 44,500 31,700 20,100 20,800 11,800 35 37.5 43,300 36,000 25,400 15,900 16,900 9,300 40 23.4 35,800 30,000 21,000 12,900 14,000 7,400 (Ft.) MIN BOOM CPCITIES 70 FT OPEN THROT TUBE BOOM Over End Blocked B B Extended 360 Rotation 0 Retracted 0 14 81.2 128,300 128,300 111,700 73,800 61,700 37,300 15 80.4 125,500 125,500 97,500 64,200 55,500 33,500 16 79.5 118,300 118,300 86,400 56,800 50,400 30,300 17 78.7 111,600 106,900 77,500 50,800 46,100 27,600 18 77.9 105,600 96,900 70,200 45,900 42,500 25,400 19 77.0 100,200 88,600 64,100 41,900 39,300 23,400 20 76.2 95,300 81,600 59,000 38,400 36,600 21,700 25 71.9 71,900 58,100 41,700 26,900 26,900 15,600 30 67.6 54,500 44,800 32,000 20,300 21,000 11,900 35 63.1 43,600 36,200 25,700 16,100 17,000 9,400 40 58.4 36,200 30,200 21,300 13,200 14,100 7,600 50 48.1 26,600 22,400 15,500 9,300 10,200 5,100 60 35.9 20,800 17,500 11,900 6,900 7,700 3,600 70 17.6 16,800 14,100 9,400 5,200 6,000 2,400 (Ft.) MIN BOOM CPCITIES 50 FT OPEN THROT TUBE BOOM Over End Blocked B B Extended 360 Rotation 0 Retracted 0 11 81.1 159,900 159,900 153,600 129,400 91,100 55,600 12 80.0 155,900 155,900 141,700 103,300 78,600 47,800 13 78.8 144,700 144,700 130,000 85,800 69,000 41,900 14 77.6 134,900 134,900 111,200 73,200 61,500 37,200 15 76.4 126,300 126,300 97,000 63,800 55,400 33,300 16 75.3 118,800 118,600 86,000 56,400 50,300 30,200 17 74.1 112,000 106,500 77,200 50,500 46,000 27,500 18 72.9 106,000 96,600 69,900 45,700 42,400 25,300 19 71.7 100,600 88,400 63,900 41,600 39,300 23,300 20 70.5 95,600 81,400 58,700 38,200 36,500 21,600 25 64.3 71,700 58,000 41,600 26,800 26,900 15,600 30 57.7 54,300 44,700 31,900 20,300 21,000 11,900 35 50.6 43,500 36,200 25,600 16,100 17,000 9,400 40 42.7 36,100 30,200 21,200 13,100 14,100 7,600 50 20.9 26,500 22,300 15,500 9,200 10,200 5,100 MIN BOOM CPCITIES 80 FT OPEN THROT TUBE BOOM Over End Blocked B B Extended 360 Rotation 0 Retracted 0 15 81.6 114,100 114,100 97,600 64,400 55,500 33,500 16 80.9 111,900 111,900 86,500 56,900 50,400 30,300 17 80.1 109,800 106,900 77,600 50,900 46,100 27,600 18 79.4 105,300 97,000 70,300 46,000 42,500 25,300 19 78.7 100,000 88,700 64,100 41,900 39,300 23,300 20 77.9 95,100 81,600 59,000 38,400 36,600 21,600 25 74.2 71,900 58,100 41,700 26,900 26,800 15,500 30 70.5 54,400 44,700 31,900 20,300 20,900 11,800 35 66.6 43,600 36,200 25,600 16,100 16,900 9,300 40 62.7 36,100 30,200 21,200 13,100 14,000 7,500 50 54.3 26,600 22,300 15,500 9,200 10,200 5,100 60 44.8 20,700 17,400 11,900 6,800 7,700 3,500 70 33.5 16,700 14,100 9,400 5,100 5,900 2,400 80 16.5 13,800 11,600 7,500 3,900 4,600 1,500 (Ft.) LS 208H MIN BOOM CPCITIES 60 FT OPEN THROT TUBE BOOM Over End Blocked B B Extended 360 Rotation 0 Retracted 0 12 81.6 148,400 148,400 141,400 103,800 78,800 48,000 13 80.7 143,300 143,300 130,400 86,200 69,200 42,000 14 79.7 134,600 134,600 111,500 73,600 61,600 37,300 15 78.7 126,100 126,100 97,300 64,100 55,500 33,500 16 77.8 118,600 118,600 86,200 56,600 50,400 30,300 17 76.8 111,900 106,800 77,400 50,700 46,100 27,600 18 75.8 105,800 96,800 70,100 45,800 42,500 25,300 19 74.8 100,400 88,500 64,000 41,800 39,300 23,400 20 73.8 95,500 81,500 58,900 38,300 36,600 21,700 25 68.8 71,800 58,100 41,700 26,900 26,900 15,600 30 63.6 54,400 44,800 32,000 20,300 21,000 11,900 35 58.1 43,600 36,200 25,700 16,100 17,000 9,400 40 52.3 36,200 30,200 21,300 13,200 14,200 7,600 50 38.9 26,600 22,400 15,500 9,300 10,300 5,200 60 19.0 20,700 17,500 11,900 6,800 7,800 3,600 MIN BOOM CPCITIES 90 FT OPEN THROT TUBE BOOM Over End Blocked B B Extended 360 Rotation 0 Retracted 0 16 81.9 103,200 103,200 86,600 57,000 50,400 30,300 17 81.2 101,500 101,500 77,600 51,000 46,100 27,600 18 80.6 100,000 97,000 70,300 46,000 42,400 25,300 19 79.9 98,100 88,700 64,200 41,900 39,200 23,300 20 79.3 94,800 81,600 59,000 38,400 36,500 21,600 25 76.0 71,900 58,000 41,700 26,800 26,700 15,400 30 72.7 54,400 44,700 31,900 20,200 20,800 11,700 35 69.4 43,500 36,100 25,500 16,000 16,800 9,200 40 65.9 36,000 30,100 21,100 13,000 13,900 7,400 50 58.7 26,500 22,200 15,400 9,100 10,000 4,900 60 50.9 20,600 17,300 11,800 6,700 7,600 3,400 70 42.2 16,700 14,000 9,300 5,000 5,800 2,300 80 31.5 13,800 11,500 7,500 3,800 4,500 1,500 90 15.5 11,600 9,600 6,100 2,800 3,500

B MIN BOOM CPCITIES 100 FT OPEN THROT TUBE BOOM Over End Blocked B B Extended 360 Rotation 0 Retracted 0 18 81.5 92,200 92,200 70,300 46,000 42,300 25,200 19 81.0 90,800 88,700 64,100 41,900 39,200 23,200 20 80.4 89,400 81,600 59,000 38,400 36,400 21,500 25 77.5 71,900 58,000 41,600 26,800 26,600 15,300 30 74.5 54,300 44,600 31,800 20,100 20,700 11,600 35 71.5 43,400 36,000 25,400 15,900 16,700 9,100 40 68.5 35,900 30,000 21,000 12,900 13,800 7,300 50 62.1 26,400 22,100 15,200 9,000 9,900 4,800 60 55.4 20,500 17,200 11,600 6,600 7,400 3,200 70 48.2 16,500 13,900 9,200 4,900 5,700 2,200 80 39.9 13,700 11,400 7,400 3,700 4,400 90 29.9 11,500 9,500 6,000 2,700 3,400 100 14.7 9,800 8,000 4,900 2,000 2,600 MIN BOOM CPCITIES 130 FT OPEN THROT TUBE BOOM Over End Blocked B B Extended 360 Rotation 0 25 80.4 65,100 57,700 41,400 26,300 30 78.1 54,100 44,300 31,500 20,300 35 75.9 43,100 35,600 25,100 16,300 40 73.6 35,600 29,600 20,600 13,400 50 68.9 26,000 21,700 14,800 9,500 60 64.1 20,100 16,800 11,200 70 59.1 16,100 13,400 8,700 80 53.8 13,300 11,000 6,900 90 48.2 11,100 9,100 5,600 PR ROH HIBIT ITED 7,000 5,200 3,900 3,000 100 41.9 9,400 7,700 4,500 2,200 110 34.8 8,000 6,500 3,600 1,500 120 26.1 6,900 5,500 2,900 130 12.9 5,900 4,600 2,200 Retracted 0 PR ROH HIBIT ITED MIN BOOM CPCITIES 110 FT OPEN THROT TUBE BOOM Over End Blocked B B Extended 360 Rotation 0 25 78.6 71,800 57,900 41,500 26,700 26,500 30 75.9 54,300 44,500 31,700 20,000 20,600 35 73.2 43,300 35,900 25,300 15,800 16,500 40 70.5 35,800 29,800 20,900 12,800 13,700 50 64.9 26,300 22,000 15,100 8,900 9,800 60 59.0 20,400 17,100 11,500 6,400 7,300 70 52.7 16,400 13,700 9,000 4,800 5,500 80 45.8 13,500 11,300 7,200 3,600 4,300 90 38.0 11,400 9,400 5,900 2,600 3,300 100 28.4 9,700 7,900 4,800 1,900 2,500 110 14.0 8,300 6,700 3,900 1,800 Retracted 0 TED IBIT PR ROH MIN BOOM CPCITIES 140 FT OPEN THROT TUBE BOOM Over End Blocked B B Extended 25 81.1 58,300 57,600 41,300 30 79.0 54,000 44,200 31,300 35 76.9 43,000 35,500 25,000 40 74.8 35,500 29,500 20,500 50 70.5 25,900 21,600 14,700 60 66.1 20,000 16,600 11,100 70 61.5 16,000 13,300 8,600 80 56.8 13,100 10,800 6,800 90 51.7 10,900 9,000 5,400 100 46.3 9,200 7,500 4,300 110 40.3 7,900 6,300 3,400 120 33.5 6,700 5,300 2,700 130 25.2 5,800 4,500 2,100 140 12.4 4,900 3,800 1,500 360 Rotation 0 Retracted PROHIBITED 0 MIN BOOM CPCITIES 120 FT OPEN THROT TUBE BOOM Over End Blocked B B Extended 360 Rotation 0 25 79.6 70,400 57,800 41,400 26,600 26,400 30 77.1 54,200 44,400 31,600 19,900 20,400 35 74.7 43,200 35,800 25,200 15,700 16,400 40 72.2 35,700 29,700 20,800 12,700 13,500 50 67.1 26,100 21,900 15,000 8,700 9,600 60 61.8 20,300 16,900 11,400 6,300 7,100 70 56.2 16,300 13,600 8,900 4,600 5,400 80 50.3 13,400 11,100 7,100 3,400 4,100 90 43.7 11,200 9,300 5,700 2,500 3,100 100 36.3 9,500 7,800 4,600 1,700 2,300 110 27.2 8,100 6,600 3,700 1,700 120 13.4 7,000 5,600 3,000 Retracted 0 ED PRO OHIB BITE P MIN BOOM CPCITIES 150 FT OPEN THROT TUBE BOOM Over End Blocked B B Extended 25 81.7 53,700 53,700 41,200 30 79.7 50,800 44,000 31,200 35 77.8 42,900 35,400 24,800 40 75.8 35,400 29,300 20,400 50 71.9 25,700 21,400 14,500 60 67.8 19,800 16,500 10,900 70 63.6 15,800 13,100 8,400 360 Rotation 0 Retracted 80 59.2 12,900 10,700 6,600 PROHIBITED 90 54.7 10,800 8,800 5,200 100 49.9 9,100 7,300 4,100 110 44.6 7,700 6,100 3,300 120 38.9 6,600 5,200 2,500 130 32.4 5,600 4,300 1,900 140 24.3 4,800 3,600 150 12.0 4,100 3,000 0 LS 208H

B MIN BOOM CPCITIES 160 FT OPEN THROT TUBE BOOM Over End Blocked B B Extended 30 80.4 46,600 43,900 31,100 35 78.6 42,800 35,200 24,700 40 76.7 35,200 29,200 20,200 50 73.0 25,600 21,300 14,400 60 69.2 19,700 16,300 10,700 70 65.4 15,700 12,900 8,200 80 61.3 12,800 10,500 6,400 360 Rotation 0 Retracted 90 57.2 10,600 8,600 5,100 PROHIBITED 100 52.8 8,900 7,200 4,000 110 48.2 7,500 6,000 3,100 120 43.2 6,400 5,000 2,400 130 37.6 5,400 4,200 1,800 140 31.3 4,600 3,500 150 23.5 3,900 2,900 160 11.6 3,300 2,300 0 MIN BOOM CPCITIES 180 FT OPEN THROT TUBE BOOM Over End Blocked B B 30 81.5 37,500 37,500 35 79.9 36,800 34,900 40 78.2 33,900 28,900 50 75.0 25,300 20,900 60 71.6 19,300 16,000 70 68.2 15,300 12,600 80 64.8 12,400 10,100 90 61.2 10,300 8,300 100 57.5 8,500 6,800 110 53.6 7,200 5,600 120 49.6 6,000 4,600 130 45.3 5,100 3,800 140 40.6 4,300 3,100 150 35.4 3,600 2,500 160 29.5 3,000 2,000 170 22.1 2,500 1,500 Extended 360 Rotation 0 PROHIBITED Retracted 0 MIN BOOM CPCITIES 170 FT OPEN THROT TUBE BOOM Over End Blocked B B 30 81.0 42,400 42,400 35 79.2 40,300 35,100 40 77.5 35,100 29,000 50 74.0 25,400 21,100 60 70.5 19,500 16,100 70 66.9 15,500 12,800 80 63.2 12,600 10,300 90 59.3 10,400 8,400 100 55.3 8,700 7,000 110 51.1 7,300 5,800 120 46.6 6,200 4,800 130 41.8 5,300 4,000 140 36.5 4,500 3,300 150 30.3 3,800 2,700 160 22.8 3,200 2,200 170 11.3 2,600 1,700 Extended 360 Rotation 0 PROHIBITED Retracted 0 MIN BOOM CPCITIES 190 FT OPEN THROT TUBE BOOM Over End Blocked B B 30 81.9 32,900 32,900 35 80.4 32,500 32,500 40 78.9 28,900 28,700 50 75.8 23,900 20,800 60 72.6 19,200 15,800 70 69.4 15,200 12,400 80 66.2 12,300 10,000 Extended 360 Rotation 0 90 62.8 10,100 8,100 PROHIBITED 100 59.4 8,400 6,600 110 55.8 7,000 5,400 120 52.1 5,900 4,500 130 48.2 4,900 3,600 140 44.0 3,900 2,900 150 39.4 3,000 2,300 160 34.4 2,100 1,800 Retracted 0 Note: Refer To Page 7 For Capacity Deductions Caused By ny Jib ttachment Or Tip Extension. LS 208H

This page intentionally left blank LS 208H

Link Belt Construction Equipment Company Lexington, Kentucky www.linkbelt.com Link Belt is a registered trademark. Copyright 2005. ll rights reserved. We are constantly improving our products and therefore reserve the right to change designs and specifications. LS 208H

Jib Capacities Hydraulic Lattice Crawler Crane LS 208H II 80 ton (72.6 metric ton) Tube + Jib 40 170 (12.19 51.8 m) Tube with 30 60 (9.14 18.28 m) of Jib 180 (54.9 m) Tube with 30 (9.14m) or 45 (13.7 m) of Jib 20 (6.10 m) Open Throat Top Section with 32 (0.81 m) Wide x 24 (0.61) Deep Jib Extended Blocked Capacities 360 Degree Capacities B Counterweight Options 20 2 (6.15 m) Crawler Length LS 208H II CUTION: This material is supplied for reference use only. Operator must refer to in cab Crane Rating Manual to determine allowable machine lifting capacities and operating procedures.

TUBULR JIB NOTES FOR TUBE BOOM 1. Capacities are for a LS 208H crawler crane with B (39,700 lb) counterweight. 2. Separate capacity charts are listed for 360 and for over end blocked crawler working areas. Verify operating conditions as described on the Working rea Chart found in the general information section of this Crane Rating Manual. pply the appropriate lift capacity chart based on the working area and the specific operating conditions. 3. Over end blocked capacities can be lifted over either end with the crane standing level on a firm supporting surface. dequate blocking must be placed under both treadmember sprockets (or idler rollers) at the end that the load is to be lifted to prevent rocking. The ramps supplied with the machine are considered to be adequate blocking. 4. Capacities are for side frames in the extended position only and are based on the crane standing level on a firm supporting surface. 5. Capacities are limited to a LBCE 44 x 54 tube boom with an open throat and a LBCE 12 ton, 24 x 32 cross section tube jib with a 11 6 high jib mast properly assembled. 6. Two parts of 1 Diameter Type RB wire rope are required for maximum lift. 7. Capacities are for 30, 45, and 60 jib lengths only. 8. Maximum boom plus jib combination is 170 + 60 or 180 + 45. The only jib lengths available on the 180 tube boom are 30 and 45. 9. The least stable condition is over the side. 10. ll capacities are listed in pounds and are not more than 75% of the tipping loads. Shaded capacities are governed by factors other than those that would cause a tipping condition. 11. deduction must be made from the jib capacities for the weight of the following: Main boom hook block or hook ball, jib hook block or hook ball, slings, grapple, etc. B 25 15 5 Tubular Jib Offset Diagram

WORKING RNGE DIGRM 240 230 220 210 200 50 60 70 25 15 80 5 Maximum See Note 2. 60 45 30 Jib Length 190 in feet above ground 180 170 160 150 140 130 120 110 100 20 90 80 70 60 50 40 30 40 Minimum See Note 2. 170 160 150 140 130 120 110 100 90 80 70 60 50 40 Main Length 30 20 10 0 220 200 180 160 140 120 100 80 60 40 20 10 Operating radius from centerline of rotation. CL OF ROTTION

WORKING RNGE DIGRM 25 15 5 Maximum See Note 2. 240 230 220 60 70 80 45 30 Jib Length 210 200 50 in feet above ground 190 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 20 30 40 Minimum See Note 2. 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 Main Length 30 20 10 0 240 220 200 180 160 140 120 100 80 Operating radius from centerline of rotation. 60 40 20 10 CL OF ROTTION

LS-208H II - w/ 44" x 54" Tube, w/ 24" x 32" Tube Jib, w/ "B" Ctwt Refer to the Tubular Jib Notes For Tube in this Crane Rating Manual before operating the crane. Jib to Length Jib Length Jib 5 Degrees 15 Degrees 25 Degrees Jib 40 30 18.4 80.0 76.4 24,000 24,000 18.4 40 30 19 79.5 76.2 24,000 24,000 19 40 30 20 78.7 76.0 24,000 24,000 20 40 30 25 74.6 74.6 24,000 24,000 78.6 74.2 24,000 24,000 25 40 30 30 70.4 72.8 24,000 24,000 74.3 72.4 24,000 24,000 78.1 71.2 19,800 19,800 30 40 30 35 66.0 70.6 24,000 24,000 69.9 70.2 23,700 23,700 73.6 68.9 17,800 17,800 35 40 30 40 61.5 67.9 24,000 24,000 65.4 67.5 21,100 21,100 69.0 66.1 16,700 16,700 40 40 30 50 51.7 60.8 21,000 21,000 55.5 60.3 17,400 17,400 58.9 58.8 15,100 15,100 50 40 30 60 40.3 50.4 17,400 17,400 43.9 49.8 16,300 16,300 46.9 47.9 13,400 13,400 60 40 45 22.3 80.0 90.6 24,000 24,000 22.3 40 45 25 78.2 89.9 24,000 24,000 25 40 45 30 74.7 88.4 24,000 24,000 79.7 87.8 19,200 19,200 30 40 45 35 71.2 86.6 21,700 21,700 76.2 86.0 16,900 16,900 35 40 45 40 67.7 84.4 19,000 19,000 72.6 83.8 16,700 16,700 77.4 82.1 12,500 12,500 40 40 45 50 60.2 78.8 16,700 16,700 65.1 78.2 13,600 13,600 69.6 76.4 10,600 10,600 50 40 45 60 52.0 71.3 13,700 13,700 56.8 70.7 11,500 11,500 61.2 68.6 9,200 9,200 60 40 45 70 42.6 61.1 11,600 11,700 47.3 60.4 10,000 10,000 51.3 58.0 8,200 8,200 70 40 45 80 30.9 46.3 10,200 10,200 80 40 60 26.2 80.0 105.2 24,000 24,000 26.2 40 60 30 77.8 104.2 21,100 21,100 30 40 60 35 74.8 102.6 18,100 18,100 35 40 60 40 71.9 100.8 16,600 16,600 77.6 100.2 13,800 13,800 40 40 60 50 65.7 96.3 13,800 13,800 71.4 95.7 11,100 11,100 76.8 93.7 8,500 8,500 50 40 60 60 59.2 90.3 11,300 11,300 64.8 89.7 9,300 9,300 70.1 87.6 7,300 7,300 60 40 60 70 52.2 82.6 9,500 9,500 57.7 82.0 8,000 8,000 62.8 79.7 6,400 6,400 70 40 60 80 44.3 72.7 8,200 8,200 49.6 72.0 7,100 7,100 54.5 69.3 5,700 5,700 80 40 60 90 34.8 59.1 7,300 7,300 40.0 58.2 6,300 6,300 90 50 30 20.1 80.0 86.2 24,000 24,000 20.1 50 30 25 76.5 85.0 24,000 24,000 25 50 30 30 72.9 83.5 24,000 24,000 76.3 83.0 24,000 24,000 79.7 81.7 20,600 20,600 30 50 30 35 69.1 81.6 24,000 24,000 72.6 81.1 24,000 24,000 75.8 79.8 18,700 18,700 35 50 30 40 65.3 79.3 24,000 24,000 68.7 78.8 22,900 22,900 71.9 77.4 17,100 17,100 40 50 30 50 57.2 73.4 23,700 22,600 60.5 72.9 19,000 19,000 63.6 71.3 15,900 15,900 50 50 30 60 48.2 65.3 19,600 17,700 51.4 64.7 16,700 16,700 54.2 62.9 14,300 14,300 60 50 30 70 37.5 53.8 16,800 14,400 40.6 53.0 15,700 14,500 70 50 45 24.0 80.0 100.4 24,000 24,000 24.0 50 45 25 79.4 100.2 24,000 24,000 25 50 45 30 76.4 98.9 24,000 24,000 30 50 45 35 73.3 97.2 23,600 23,600 77.7 96.6 17,700 17,700 35 50 45 40 70.1 95.3 20,700 20,700 74.6 94.7 16,600 16,600 78.8 92.8 13,000 13,000 40 50 45 50 63.6 90.4 16,600 16,600 68.0 89.8 14,600 14,600 72.1 87.8 11,100 11,100 50 50 45 60 56.6 84.0 15,200 15,200 60.9 83.4 12,400 12,400 64.9 81.3 9,700 9,700 60 50 45 70 48.9 75.7 12,900 12,900 53.2 75.0 10,800 10,800 56.9 72.6 8,700 8,700 70 50 45 80 40.2 64.6 11,200 11,200 44.2 63.7 9,600 9,600 47.7 60.9 7,900 7,900 80 50 45 90 29.1 48.7 10,000 10,000 90 50 60 27.9 80.0 115.0 24,000 24,000 27.9 50 60 30 78.9 114.5 22,500 22,500 30 50 60 35 76.2 113.1 19,400 19,400 35 50 60 40 73.6 111.5 17,000 17,000 78.8 110.8 14,400 14,400 40 50 60 50 68.1 107.4 15,000 15,000 73.2 106.7 11,800 11,800 78.1 104.6 8,800 8,800 50 50 60 60 62.3 102.1 12,300 12,300 67.4 101.5 9,900 9,900 72.2 99.2 7,600 7,600 60