LS 138H II. 80 ton (72.57 metric ton) Lattice Boom Crawler Crane. Tube Boom Capacities ( m)

Similar documents
LS 278H. 250 ton (227 metric ton) Hydraulic Lattice Boom Crawler Crane. Tube Boom Capacities ft. ( m)

LS---208HII. Technical Data. Specifications & Tube Boom Capacities. Crawler Crane 80 Ton (72.57 metric ton)

LS-208H II. HYLAB Series. Lattice Boom Crawler Crane 80-ton (77.62 mt)

HC-278H II. HYLAB Series. Lattice Boom Truck Crane 300-ton (272 mt)

RTC 8050 Series II. 50 ton (45.36 metric tons) Telescopic Boom Rough Terrain Crane

For sales use only CRANE RATING MANUAL. RTC-8090 Series II 5 - Section Boom. Not for crane operations SERIAL NUMBER: XXXX-XXXX

Working Weights. Assembly Diagram. Ctwt ABC+A

CRANE RATING MANUAL HTC

LINK-BELT MODEL HTC-8675LB - 75 TON CAPACITY 48 7" (.80m) 41 0" /8" (3.52m) /16" (2.02m) /4" (.34m) 25" 11 0" (.

truck crane 140 tons link-belt htc-3140lb BOOM LENGTHS: 42 to 195 ft JIB LENGTHS: 38 to 109 ft JIB OFFSETS:

For Sales Use Only! HTC 8650 Series II CRANE RATING MANUAL 4 SECTION POWER BOOM SERIAL NUMBER. not for crane operations

LS 278H. 250 ton (227 metric ton) Hydraulic Lattice Boom Crawler Crane. Tube Boom + Jib Capacities

HTC-8670LB TELESCOPIC TRUCK CRANE 70-Ton (63.50 mt)

Lifting Capacities Telescopic Boom All Terrain Crane ATC ton (118 metric ton) Link Belt

LS-308H II. HYLAB Series. Lattice Boom Crawler Crane

LINK-BELT MODEL HTC TON CAPACITY RANGE DIAGRAM. LIFTING CHARTS - Hydraulic Truck Cranes

CRANE RATING MANUAL HTC

RT555 TEREX. rough terrain crane 55 ton capacity. range diagram & lifting capacities. Range Diagram ( boom) HOOK BLOCK WEIGHTS

T 775. truck crane 75 ton capacity. range diagram & lifting capacities. Range Diagram (40' - 126' boom)

Technical Data. Specifications & Capacities. HSL Crawler Crane. View thousands of Crane Specifications on FreeCraneSpecs.com

Liftcrane Boom Capacities 999 SERIES 2. Manitowoc Cranes, Inc.

Lattice Boom Crawler Crane 80 ton (72.6 mt)

CONSTRUCTION EQUIPMENT LS-238H HYLAB. 150-ton (136 t) Hydraulic Lattice Boom Crawler Crane. Superior Crawler Crane Transportability!

Technical Data. Specifications & Capacities. HSL Crawler Crane (supersedes 5668)-0115-P Ton ( metric ton)

MODEL CKE2500-II TON CAPACITY

Cranes. Range Diagram and Lifting Capacity RT TON LIFTING CAPACITY RANGE DIAGRAM 33' - 110' BOOM

Cranes. Range Diagram and Lifting Capacity RT TON LIFTING CAPACITY RANGE DIAGRAM 40' - 126'

Technical Data. Specifications & Capacities. HSL Crawler Crane (supersedes 5776)-1217-U Ton ( metric ton)

Range Diagram and Lifting Capacity T Cranes RANGE DIAGRAM BOOM

Technical Data. Specifications & Capacities. HSL Crawler Crane 80 Ton (72.6 metric ton) P8

Cranes. Range Diagram and Lifting Capacity RT345-1XL 45 TON LIFTING CAPACITY RANGE DIAGRAM 33.75' - 105' BOOM

LINK-BELT MODEL 238H5-150 TON CAPACITY

40' ' POWERED BOOM: MODE 1 40' - 126' POWERED BOOM: MODE 2

Optional two-piece bi-fold lattice fly can be extended with two optional 15' (4.57 m) fly extensions for up to 85' of fly

Range Diagram and Lifting Capacity T Cranes. View thousands of Crane Specifications on FreeCraneSpecs.com RANGE DIAGRAM BOOM

LS 138H II. 80 ton (72.57 metric ton) Lattice Boom Crawler Crane. Website: Cranes101.com Phone:

LINK-BELT LARGE TELESCOPIC BOOM CRANE SWING CAB (TLL)

Range Diagram and Lifting Capacity RT230. Cranes 30 TON LIFTING CAPACITY RANGE DIAGRAM 30' - 94' BOOM REDUCTION IN MAIN BOOM CAPACITY

Big power, big cab. Big, new HYLAB cab. Powerful, reliable, customer proven features. Easy transportability and assembly

Range Diagram and Lifting Capacity RT665. Cranes 65 TON LIFTING CAPACITY RANGE DIAGRAM 36' - 111' BOOM REDUCTION IN MAIN BOOM CAPACITY

Series 1300A Hydraulic Crane 30 Ton Load Ratings

Liftcrane Boom Capacities 2250 SERIES 3

Technical Data. Specifications & Capacities. HSL Crawler Crane (supersedes 5762)-1016-U Ton ( metric ton)

Series 1400A Hydraulic Crane 33 Ton

Series 1400 Hydraulic Crane 33 Ton Load Ratings

Series 900H Hydraulic Crane 27 Ton Load Ratings

LOAD CHART MANUAL FOR RT55 ROUGH TERRAIN CRANE

Series 1300 Hydraulic Crane 30 Ton Load Ratings

LOAD CHART MANUAL FOR RT60 ROUGH TERRAIN CRANE

OPERATING RADIUS/LIFTING HEIGHT CHART

LOAD CHARTS TMS9000E 85% STABILITY SERIAL NUMBER

Technical Data. Specifications & Capacities. HSL Crawler Crane (supersedes 5603)-0913-P Ton ( metric ton)

AMERICAN MODEL 5299A - 60 TON CAPACITY

TADANO MODEL TR-300XL-3-30 TON CAPACITY WORKING RANGE CHART. LIFTING CHARTS - Rough Terrain Cranes

LIFTING CHARTS - Crawler Cranes AMERICAN MODEL TON CAPACITY

RTC Technical Data. Specifications & Capacities. Telescopic Boom Rough Terrain Crane 60 ton (54.4 metric ton)

RTC Technical Data. Specifications & Capacities. Telescopic Boom Rough Terrain Crane 60 ton (54.4 metric ton)

Liftcrane Boom Capacities Boom No. 58 HL 332,000 lb Crane Counterweight 120,000 lb Carbody Counterweight 360 Degree Rating SERIES 3

Specifications Hydraulic Lattice Boom Crawler Crane LS-138H. 75-Ton (68 metric ton) General dimensions Feet meters. General dimensions Feet meters

ATC-822. Hydraulic All-Terrain Crane 22-ton (20 mt)

LOAD CHART & RIGGING PRACTICE EXERCISES

250 ton (226.8 mt) Lattice Crawler Crane

HYDRAULIC CRAWLER CRANE

LIFTING CHARTS - Crawler Cranes AMERICAN MODEL TON CAPACITY

4600 SERIES 3 RINGER SERIES 2. Manitowoc Cranes, Inc. Manitowoc, Wisconsin U.S.A.

Technical Data. Specifications & Capacities. HSL Crawler Crane (supersedes 5775)-0917-T Ton (117.9 metric ton)

PRELIMINARY. 230 ton (208.6 mt) Lattice Crawler Crane ENGINE DRUMS LOWER COUNTERWEIGHTS BOOM HOIST ATTACHMENT

Specifications. RTC-8040 Series II. 40-ton (36.28 metric ton) Rough Terrain Crane. General dimensions feet meters. Not to Scale

LOAD CHART. MANTIS Model 10010MX. 50 Ton Hydraulic Crawler Crane as originally manufactured and equipped by Tadano Mantis Corporation.

RT 300 SERIES. Rough Terrain Cranes. simple, available and cost effective FEATURES

HYDRAULIC CRAWLER CRANE CK2500

LIFTING CHARTS - Conventional Truck Cranes AMERICAN MODEL TON CAPACITY

Specifications LS-248H II. 200-Ton ( metric ton) Hydraulic Lattice Boom Crawler Crane

MANTIS 6010 LOAD CHART 80'-0 STANDARD BOOM LOAD CHART. MANTIS Model 6010

Load Chart Exercise Workbook

LIFTING CHARTS - Crawler Cranes AMERICAN MODEL TON CAPACITY

LOAD CHARTS MANTIS 6010LP 30 TON TELE-BOOM CRAWLER CRANE 1 V FT MAIN BOOM, 20 FT EXTENSION & 20 FT JIB

47,000 Ib ( kg) maximum lifting capacity. 101 (30.78 m) maximum sheave height. 144 (43.89 m) maximum sheave height with (

RTC ton (90 metric ton)

MANTIS 200RS LOAD CHART 54'-0 STANDARD BOOM LOAD CHART. MANTIS Model 200RS

To learn more about this model, call or visit giuffre.com today! GIUFFRE.COM. 34,000 Ib ( kg) maximum lifting capacity

Max. Lifting Capacity: 100 US Tons Max. Boom Length: 200 ft Max. Boom + Jib Length: 190 ft + 60 ft

Technical Data. Specifications & Capacities. Telescopic Crawler Crane S5. 50 Ton (51mt Export Machine)

LS-308H II. HYLAB Series. Lattice Boom Crawler Crane

MANITOWOC (Crawler Mount) LOAD CHART

LOAD CHART MANUAL FOR RT75 ROUGH TERRAIN CRANE

ON & OFF THE ROAD OR RAIL REACHNG NEW HEIGHTS AND WORKING HARDER THAN EVER.

Working Range Diagram

PRELIMINARY. 45 ton (40.8 mt) Telescopic Crawler Crane STANDARD FEATURES:

HC 275 CAL CRANE & EQUIPMENT. Tel: 1 (844) Fax: 1 (510)

LINK-BELT. These charts are not to be used for any other purpose. LOAD CHARTS for Use in CCO Written Examinations

Off the truck and ready for work! Transports in one load with counterweights

Lifting Capacities Pounds ( boom)

model 5500 product guide contents 55 ton Lift Capacity Maximum Load Moment 160' Heavy-Duty Boom on Heavy-Duty Boom 213 HP engine 338 fpm line speed

Series I300 Hydraulic Crane

HC 80. Hydraulic Crawler Crane. simple, available and cost effective FEATURES

Lifting Capacities Pounds (30 94 boom)

250 ton (226.8 mt) Lattice Crawler Crane

Hydraulic Crawler Crane

Transcription:

Lattice Crawler Crane 8 ton (72.57 metric ton) Tube Capacities 4 2 (12.19 6.96 m) 24 (7.31 m) Live Mast / 2 (6.1 m) Base Section / 5 (1.52m) Tip Extension Duty Cycle Capacities 4 7 (12.19 21.34 m) Tube Counterweight Tube Capacities 4 2 (12.19 6.96 m) Tube 54 (1.37 m) Wide x 44 (1.12 m) Deep 2 (6.1 m) Open Throat Top Section 24 (7.31 m) Live Mast / Capacities B,, or Counterweight Options 2 2 (6.15 m) Crawler Length II CUTION: This material is supplied for reference use only. Operator must refer to in cab Crane Rating Manual to determine allowable machine lifting capacities and operating procedures. Litho in U.S.. 7/ #6276 (Supersedes #624)

OPERTING INSTRUCTIONS GENERL: 1. Rated lifting capacities in pounds as shown on lift charts pertain to this crane as originally manufactured and normally equipped. Modifications to the crane or use of optional equipment other than that specified can result in a reduction of capacity. 2. Construction equipment can be dangerous if improperly operated or maintained. Operation and maintenance of this crane must be in compliance with the information in the Operator s, Parts, and Safety Manuals supplied with this crane. If these manuals are missing, order replacements through the distributor. 3. The operator and other personnel associated with this crane shall read and fully understand the latest applicable merican National Standards Institute (NSI) safety standards for cranes. 4. ll capacities listed in this book are in compliance with SME/NSI B3.5c 1998, SE J987 pril 1994, and SE J765 October 199. LIFT CRNE OPERTION: 1. Capacities shown are in pounds and are not more than 75% of the tipping loads with the crane standing level on firm supporting surface. deduction must be made from these capacities for weight of hook block, hook ball, sling, grapple, load weighing device, etc. When using main hook while jib is attached, reduce capacities by values shown on Capacity Deductions For Lifting Off Main Hook With Jib Installed. When using main hook while 5ft. tip extension is attached, reduce capacities by values shown on Capacity Deductions For Lifting Off Main Hook With 5ft. Tip Extension Installed. See Operator s Manual for all limitations when raising or lowering attachment. 2. The crane capacities in the shaded areas are based on structural strength. The crane capacities in the non shaded areas are based on stability ratings. 3. For recommended reeving, parts of line, wire rope type, and wire rope inspection, see Wire Rope Capacity chart, Operator s Manual, and Parts Manual. 4. ratings in this Crane Rating Manual are based on freely suspended loads and make no allowances for such factors as the effect of the wind, ground conditions, and operating speeds. The operator shall therefore reduce load ratings in order to take these conditions into account. 5. Rated lifting capacities do not account for the effects of wind on a suspended load or boom. Lifting capacities should be considered acceptable for wind speeds less than 2 mph and appropriately reduced for wind speeds greater than 2 mph. Extreme caution should be used when lifting heavy loads or loads with large wind sail area under high wind conditions (over 2 mph). 6. The 24ft. live mast must be used for all capacities in this Crane Rating Manual. 7. The least stable rated condition is over the side. 8. s must be erected and lowered over the end. 9. Do not operate at radii and boom lengths where the Crane Rating Manual lists no capacity. Do not use longer booms or jibs than those listed in this Crane Rating Manual. ny of the above can cause a tipping condition, or boom and jib failure. 1. These capacities apply only to the crane as originally manufactured and normally equipped by Link Belt Construction Equipment Company. FOR OVER END CPCITIES ONLY 1. These capacities can be lifted over either end with the crane standing level on a firm supporting surface with adequate blocking placed under the tread member sprockets/idlers, to prevent rocking. 2. Do not travel with a load. 2

WIRE ROPE CPCITY 7/8 5/8 Parts of Type Type Type Type Line DB RB ZB WB Notes 1 22,7 17,52 * 11, ** 13,65 * B 2 45,4 35,4 22, 27,31 Capacities shown are in pounds and working 3 68,1 52,56 33, 4,97 loads must not exceed the ratings on the 4 9,8 7,8 44, 54,62 capacity charts in this 5 113,5 87,6 55, 68,28 Crane Rating Manual. Study Operator s Manual 6 136,2 15,12 66, 81,94 for wire rope inspec- tion procedures. 7 158,9 122,64 77, 95,6 8 181,6 14,16 88, 19,25 LBCE Type Description DB 6 x 26 (6 x 19 Class) Warrington Seale Extra Improved Plow Steel Preformed Right Lay Regular Lay I.W.R.C. RB 19 x 19 Rotation Resistant Extra Extra Improved Plow Steel Preformed Right Lay Regular Lay. Swaged SF = 5:1 ZB 36 x 7 Class Non Rotating Extra Improved Plow Steel Right Lay Regular Lay S.F. = 5:1 WB 8 Strand Regular Lay * Use of swivel end with 1 part of line is not recommended. ** Swivel end is recommended for operation with 1 part of line. Idler Longitudinal Of Crawler WORKING RES See Note Idler Sprocket 36 Side Drive Sprocket Side Center Of Rotation See Note Note: 1. These Lines Determine The Limiting Position Of ny For Operation Within Working reas Indicated. Drive LIFTOFF CPBILITIES Counterweight () Maximum Maximum + Jib Feet Feet NO (RETRCTED) 9 N/ NO (EXTENDED) 12 N/ (RETRCTED) 14 N/ (EXTENDED) 17 N/ B (EXTENDED) See Note 6 2 18 + 6 19 + 3 See Note 6 Side Counterweight () Maximum Maximum + Jib Feet Feet NO (RETRCTED) 9 N/ NO (EXTENDED) 12 N/ (RETRCTED) 14 N/ (EXTENDED) 17 N/ B (EXTENDED) 2 17 + 6 NOTES: 1. s should be erected or lowered over the end with no load if possible hook block on ground. (See Note 6). 2. Crane on firm and level surface. 3. Open throat booms 19 and 2 in length require mid point suspension pendants. 4. and jib combination of 19 + 3 does require mid point suspension pendants. 5. and jib combination of 18 + 6 does not require mid point suspension pendants. 6. For Maximum + Jib Combinations only dequate blocking must be placed under The side frame sprockets/idlers to prevent rocking. (Lift Off only). CPCITY DEDUCTIONS FOR LIFTING OFF MIN BOOM HOOK WITH JIB INSTLLED (OPEN THROT BOOM ONLY) When using main boom hook, while jib is attached, reduce boom capacities by the values in the following chart: Jib Length (ft) Capacity Deduction (lbs) 3 2, 45 2,4 6 3,2 3

CPCITY DEDUCTIONS FOR LIFTING OFF MIN BOOM HOOK WITH 5 FOOT TIP EXTENSION INSTLLED When using main boom hook, while 5 foot tip extension is attached, reduce boom capacities by the values in the following chart: Tip Extension (ft) Capacity Deduction (lbs) 5 1,1 2 BSE SECTION CYLINDER LIFTING CPCITIES (WITHOUT COUNTERWEIGHT INSTLLED) Base Section Cylinders (ft) ngle 15 55. 26,5 26,5 16 5.9 26,5 26,5 17 46.4 26,5 26,1 18 41.6 26,5 23,9 19 36. 26,5 22, 2 29.5 26,5 2,3 21 2.6 26,5 18,7 NOTES: 1. Rated capacities for 36 rotation. 2. base section supported by make up pendants. 3. Lifting any load with one cylinder is prohibited. Rated capacities are for lifting loads with both cylinders. 4. Gantry can be either in the raised or lowered position when lifting loads with the cylinders in the base section. When the gantry is in the lowered position the backstay links must be pinned. 5. Do not raise boom higher than 55 angle. 6. Do not lower live mast below 3 angle with gantry in lowered position. LIVE MST LIFTING CPCITIES (WITHOUT COUNTERWEIGHT INSTLLED) Live Mast (ft) ngle 1 73.7 6, 6, 11 71.2 6, 51,6 12 68.7 6, 44,6 13 66.1 6, 39,2 14 63.5 6, 34,9 15 6.8 59,4 31,5 16 58. 52,7 28,6 17 55.1 47,4 26,2 18 52.2 43, 24,2 19 49.1 39,3 22,5 2 45.8 36,2 2,9 21 42.4 33,5 19,6 22 38.8 31,2 18,4 23 34.8 29,2 17,3 24 3.3 27,4 16,4 NOTES: 1. Refer to the Operator s Manual. 2. Live mast backstops must be in position and operative. 3. Use rear hoist drum only. Reeve hoist line to drum over live mast cross member. 4. Reeve hoist rope with three (3) parts of 7/8 diameter wire rope. 5. The crane shall be leveled on a firm supporting surface. 6. Capacities are based on 75% stability. 7. See Crane ssembly Component Weights chart for weight of components for crane assembly. 8. Rated capacities for 36 rotation. 9. Gantry can be either in the raised or lowered position when lifting loads with the live mast. When the gantry is in the lowered position the backstay links must be pinned. 1. Do not lower live mast below 3 angle with gantry in lowered position. 4

MXIMUM LLOWBLE CPCITIES FOR 5 FOOT TIP EXTENSION LIFTING CPCITY TO BE THE SMLLEST OF THE FOLLOWING VLUES: 1. 18, lb (Maximum). 2. The standard crane lift capacity minus 1,1 lb for the boom length, tip extension load radius, and counterweight configuration in use on the crane. NOTES: 1. ll notes are to be adhered to as listed on the standard lift crane capacity charts. 2. Reduce the main boom lift capacities by 1,1 lb when the tip extension is installed. 3. The maximum boom length on which the tip extension can be installed is 15. 4. Do not lift or suspend a load from the boom tip extension and main boom at the same time. DUTY CYCLE NOTES FOR TUBULR BOOM 1. The capacities included in this chart are the maximum allowable, and are based on machine standing level on firm suporting surface under ideal job conditions. 2. Capacities are based on 75% of minimum tipping loads for dragline; 67.5% for clamshell. 3. Capacities are maximum recommended by PCS Standard #4. User must make allowances for soft or uneven supporting surfaces, rapid cycle operations, bucket suction or other unfavorable conditions which may require smaller buckets for most efficient operation. 4. Weight of bucket, plus load must not exceed these capacities. 5. Dragline operation is not recommended with boom angles less than 35. 6. length for dragline/clamshell attachment operation should not exceed 7. 7. Retractable high gantry must be fixed in raised position for all capacities on this chart. 8. These capacities apply to the machine as originally manufactured and normally equipped by Link Belt Construction Equipment Company. DUTY CYCLE CPCITIES TUBULR BOOM Length ngle (ft) (ft) Counterweight Only (ll capacities listed are in pounds) Dragline Clamshell/Magnet 4 15 73. 15,8 4 2 65.3 15,8 4 25 57.1 15,8 15,8 4 3 48.1 15,8 15,8 4 35 37.5 15,8 15,8 4 4 23.4 15,8 5 2 7.5 15,8 5 25 64.3 15,8 5 3 57.7 15,8 15,8 5 35 5.6 15,8 15,8 5 4 42.7 15,8 15,8 5 5 2.9 15,8 6 25 68.8 15,8 6 3 63.6 15,8 6 35 58.1 15,8 15,8 6 4 52.3 15,8 15,8 6 5 38.9 15,8 15,8 6 6 19. 11,7 7 25 71.9 15,8 7 3 67.6 15,8 7 35 63.1 15,8 7 4 58.4 15,8 15,8 7 5 48.1 15,8 15,8 7 6 35.9 13, 11,7 7 7 17.6 9,3 5

WORKING RNGE DIGRM Maximum ngle See Note 2. 8 Height in feet above ground 2 19 18 17 16 15 14 13 12 11 1 9 8 7 6 5 4 Minimum ngle See Note 2. 1 2 3 4 5 6 7 2 19 18 17 16 15 14 13 12 11 1 9 8 7 6 5 4 Main Length 3 2 1 24 22 2 18 16 14 12 1 8 6 4 2 Operating radius from centerline of rotation in feet 1. geometry shown is for unloaded condition and crane standing level on firm supporting surface. deflection, subsequent radius and boom angle change must be accounted for when applying load to hook. 2. Maximum and minimum boom angles are equal to the values listed in the capacity chart for each boom length. 6

B MIN BOOM CPCITIES 4 FT OPEN THROT TUBE BOOM 36 Rotation ngle B B 9 81.8 16, 16, 16, 16, 143,3 77,2 1 8.3 16, 16, 16, 153,2 116,9 62,8 11 78.9 16, 16, 157,6 123, 98,6 52,7 12 77.4 16, 16, 145,3 98,1 85,1 45,3 13 75.9 151,9 151,9 134,8 81,5 74,8 39,7 14 74.5 141,6 141,6 118,6 69,5 66,6 35,2 15 73. 132,6 132,6 13,5 6,5 6, 31,5 16 71.5 124,7 124,7 91,8 53,5 54,5 28,5 17 69.9 117,6 117,6 82,3 47,9 49,9 26, 18 68.4 111,3 18,7 74,6 43,3 46, 23,9 19 66.9 15,6 99,5 68,2 39,4 42,6 22, 2 65.3 1,4 91,6 62,7 36,2 39,7 2,4 25 57.1 8,2 65,4 44,5 25,3 29,2 14,6 3 48.1 6,9 5,5 34,1 19,1 22,9 11,1 35 37.5 48,8 4,9 27,4 15,1 18,6 8,7 4 23.4 4,5 34,1 22,7 12,2 15,4 7, MIN BOOM CPCITIES 5 FT OPEN THROT TUBE BOOM 36 Rotation ngle B B 11 81.1 159,9 159,9 157,3 123,9 99, 53,1 12 8. 159,9 159,9 145,1 98,9 85,5 45,7 13 78.8 151,7 151,7 134,6 82,1 75,1 4, 14 77.6 141,5 141,5 119,1 7, 66,9 35,5 15 76.4 132,5 132,5 14, 61, 6,3 31,8 16 75.3 124,6 124,6 92,2 53,9 54,8 28,8 17 74.1 117,5 117,5 82,7 48,3 5,2 26,2 18 72.9 111,2 19,1 75, 43,6 46,2 24,1 19 71.7 15,5 99,8 68,5 39,8 42,8 22,2 2 7.5 1,3 91,9 63, 36,5 39,9 2,6 25 64.3 8,2 65,6 44,7 25,5 29,4 14,8 3 57.7 61,1 5,7 34,3 19,3 23, 11,3 35 5.6 49, 41,1 27,6 15,3 18,7 8,9 4 42.7 4,7 34,4 22,9 12,4 15,6 7,2 5 2.9 3, 25,5 16,8 8,7 11,4 4,8 MIN BOOM CPCITIES 6 FT OPEN THROT TUBE BOOM ngle B B 12 81.6 149,6 149,6 144,8 99,3 85,6 45,9 13 8.7 146,4 146,4 134,4 82,5 75,3 4,1 14 79.7 141,2 141,2 119,4 7,4 67, 35,6 15 78.7 132,3 132,3 14,2 61,3 6,4 31,9 16 77.8 124,4 124,4 92,4 54,2 54,9 28,9 17 76.8 117,4 117,4 82,9 48,5 5,3 26,3 18 75.8 111,1 19,3 75,1 43,8 46,3 24,2 19 74.8 15,4 99,9 68,7 39,9 42,9 22,3 2 73.8 1,2 92,1 63,2 36,6 39,9 2,6 25 68.8 8,2 65,7 44,8 25,6 29,4 14,8 3 63.6 61,2 5,8 34,4 19,4 23, 11,3 35 58.1 49,1 41,1 27,7 15,3 18,7 8,9 4 52.3 4,8 34,4 23, 12,5 15,6 7,2 5 38.9 3,1 25,6 16,8 8,8 11,4 4,8 6 19. 23,6 2,1 13, 6,4 8,7 3,3 MIN BOOM CPCITIES 7 FT OPEN THROT TUBE BOOM 36 Rotation ngle B B 14 81.2 129,7 129,7 119,6 7,6 67,1 35,7 15 8.4 126,8 126,8 14,4 61,4 6,4 32, 16 79.5 124,1 124,1 92,6 54,3 54,9 28,9 17 78.7 117,1 117,1 83, 48,6 5,3 26,4 18 77.9 11,8 19,4 75,2 43,9 46,3 24,2 19 77. 15,2 1, 68,7 4, 42,9 22,3 2 76.2 1, 92,1 63,2 36,7 39,9 2,6 25 71.9 8,2 65,7 44,8 25,6 29,4 14,8 3 67.6 61,2 5,8 34,4 19,4 23, 11,3 35 63.1 49,1 41,1 27,7 15,3 18,7 8,9 4 58.4 4,8 34,4 23, 12,5 15,6 7,1 5 48.1 3,1 25,6 16,8 8,8 11,4 4,8 6 35.9 23,6 2,1 13, 6,4 8,7 3,3 7 17.6 19,1 16,3 1,3 4,8 6,8 2,2 MIN BOOM CPCITIES 8 FT OPEN THROT TUBE BOOM 36 Rotation ngle B B 15 81.6 116,8 116,8 14,5 61,6 6,4 32, 16 8.9 114,6 114,6 92,7 54,4 54,9 28,9 17 8.1 111,4 111,4 83,1 48,7 5,3 26,3 18 79.4 19,3 19,3 75,3 44, 46,3 24,1 19 78.7 14,9 1,1 68,8 4,1 42,9 22,2 2 77.9 99,8 92,2 63,3 36,7 39,9 2,6 25 74.2 8, 65,7 44,8 25,6 29,4 14,7 3 7.5 61,2 5,7 34,4 19,3 22,9 11,2 35 66.6 49, 41,1 27,6 15,3 18,6 8,8 4 62.7 4,7 34,3 22,9 12,4 15,5 7,1 5 54.3 3,1 25,5 16,8 8,7 11,3 4,7 6 44.8 23,5 2, 12,9 6,4 8,6 3,2 7 33.5 19,1 16,3 1,3 4,8 6,7 2,1 8 16.5 15,9 13,5 8,3 3,6 5,3 MIN BOOM CPCITIES 9 FT OPEN THROT TUBE BOOM 36 Rotation ngle B B 16 81.9 14,7 14,7 92,7 54,5 54,9 28,9 17 81.2 12,8 12,8 83,2 48,7 5,2 26,3 18 8.6 11,2 11,2 75,3 44, 46,2 24,1 19 79.9 99,6 99,6 68,8 4,1 42,8 22,2 2 79.3 97,7 92,2 63,3 36,7 39,8 2,5 25 76. 79,8 65,7 44,8 25,6 29,3 14,7 3 72.7 61,2 5,7 34,3 19,3 22,8 11,1 35 69.4 49, 41, 27,5 15,2 18,5 8,7 4 65.9 4,7 34,2 22,8 12,3 15,4 6,9 5 58.7 3, 25,4 16,7 8,6 11,2 4,6 6 5.9 23,5 19,9 12,8 6,3 8,5 3,1 7 42.2 19, 16,2 1,2 4,7 6,6 2, 8 31.5 15,8 13,4 8,3 3,5 5,2 9 15.5 13,4 11,3 6,8 2,6 4,1 7

B MIN BOOM CPCITIES 1 FT OPEN THROT TUBE BOOM 36 Rotation ngle B B 18 81.5 93,4 93,4 75,3 44, 46,2 19 81. 92, 92, 68,8 4, 42,7 2 8.4 89,4 89,4 63,2 36,7 39,7 25 77.5 79,6 65,6 44,7 25,5 29,2 3 74.5 61,1 5,6 34,2 19,2 22,7 35 71.5 48,9 4,9 27,4 15,1 18,4 4 68.5 4,6 34,1 22,7 12,2 15,3 5 62.1 29,9 25,3 16,6 8,5 11,1 6 55.4 23,4 19,8 12,7 6,2 8,4 7 48.2 18,9 16,1 1,1 4,6 6,5 8 39.9 15,7 13,3 8,1 3,4 5,1 9 29.9 13,3 11,2 6,7 2,5 4, 1 14.7 11,4 9,5 5,5 3,1 MIN BOOM CPCITIES 11 FT OPEN THROT TUBE BOOM ngle B B 36 Rotation IBIT TED PRO OHI 25 78.6 77,1 65,5 44,6 25,4 29, 3 75.9 61, 5,5 34,1 19,1 22,6 35 73.2 48,8 4,8 27,3 15, 18,2 4 7.5 4,5 34, 22,6 12,1 15,1 5 64.9 29,8 25,2 16,4 8,4 1,9 6 59. 23,2 19,7 12,6 6, 8,2 7 52.7 18,8 15,9 9,9 4,4 6,4 8 45.8 15,6 13,2 8, 3,3 5, 9 38. 13,2 11,1 6,5 2,4 3,9 1 28.4 11,3 9,4 5,4 3, 11 14. 9,7 8,1 4,4 2,3 MIN BOOM CPCITIES 12 FT OPEN THROT TUBE BOOM 36 Rotation ngle B B IBIT TED PRO OHI 25 79.6 71,6 65,5 44,6 25,4 28,9 3 77.1 61, 5,4 34, 19, 22,5 35 74.7 48,7 4,7 27,2 14,9 18,1 4 72.2 4,4 33,9 22,5 12, 15, 5 67.1 29,7 25,1 16,3 8,2 1,8 6 61.8 23,1 19,5 12,4 5,9 8,1 7 56.2 18,7 15,8 9,8 4,3 6,2 8 5.3 15,5 13, 7,9 3,1 4,8 9 43.7 13, 1,9 6,4 2,2 3,7 1 36.3 11,1 9,3 5,2 2,9 11 27.2 9,6 8, 4,3 2,2 12 13.4 8,3 6,8 3,5 PR ROH HIB BITE ED MIN BOOM CPCITIES 13 FT OPEN THROT TUBE BOOM 36 Rotation ngle B B 25 8.4 65,1 65,1 44,5 28,8 3 78.1 6,9 5,3 33,9 22,3 35 75.9 48,6 4,6 27,1 18, 4 73.6 4,2 33,8 22,3 14,8 5 68.9 29,5 24,9 16,2 1,6 6 64.1 23, 19,4 12,3 7,9 7 59.1 18,5 15,6 9,6 6, 8 53.8 15,3 12,9 7,7 4,7 9 48.2 12,9 1,8 6,3 3,6 1 41.9 11, 9,2 5,1 2,7 11 34.8 9,5 7,8 4,2 2, 12 26.1 8,2 6,7 3,4 13 12.9 7,1 5,8 2,7 MIN BOOM CPCITIES 14 FT OPEN THROT TUBE BOOM ngle B B IBIT ITED PRO OHI 36 Rotation IBIT TED PRO OHI 25 81.1 6, 6, 44,4 28,7 3 79. 56,7 5,2 33,8 22,2 35 76.9 48,5 4,4 27, 17,8 4 74.8 4,1 33,6 22,2 14,7 5 7.5 29,4 24,8 16, 1,5 6 66.1 22,8 19,2 12,1 7,8 7 61.5 18,4 15,5 9,5 5,9 8 56.8 15,2 12,7 7,6 4,5 9 51.7 12,7 1,6 6,1 3,4 1 46.3 1,8 9, 4,9 2,6 11 4.3 9,3 7,7 4, 12 33.5 8, 6,6 3,2 13 25.2 7, 5,6 2,6 14 12.4 6,1 4,8 2, MIN BOOM CPCITIES 15 FT OPEN THROT TUBE BOOM ngle B B PR ROH HIB BITE ED 36 Rotation PR ROH HIB BITE ED 25 81.7 55,1 55,1 44,3 3 79.7 52,2 5, 33,7 35 77.8 48,4 4,3 26,8 4 75.8 4, 33,5 22,1 5 71.9 29,2 24,6 15,9 6 67.8 22,7 19,1 12, 7 63.6 18,2 15,3 9,3 8 59.2 15, 12,6 7,4 PROHIBITED 9 54.7 12,6 1,5 5,9 1 49.9 1,7 8,8 4,8 11 44.6 9,1 7,5 3,8 12 38.9 7,9 6,4 3,1 13 32.4 6,8 5,5 2,4 14 24.3 5,9 4,7 15 12. 5,1 4, 8

B MIN BOOM CPCITIES 16 FT OPEN THROT TUBE BOOM 36 Rotation ngle B B 3 8.4 47,9 47,9 33,5 35 78.6 44, 4,2 26,7 4 76.7 39,9 33,3 21,9 5 73. 29,1 24,5 15,7 6 69.2 22,5 18,9 11,8 7 65.4 18, 15,1 9,2 8 61.3 14,8 12,4 7,2 9 57.2 12,4 1,3 5,8 PROHIBITED 1 52.8 1,5 8,7 4,6 11 48.2 9, 7,3 3,7 12 43.2 7,7 6,2 2,9 13 37.6 6,7 5,3 2,2 14 31.3 5,8 4,5 15 23.5 5, 3,8 16 11.6 4,3 3,2 MIN BOOM CPCITIES 17 FT OPEN THROT TUBE BOOM ngle B B 36 Rotation 3 81. 42,4 42,4 33,4 35 79.2 4,3 4, 26,6 4 77.5 37, 33,2 21,8 5 74. 28,9 24,3 15,5 6 7.5 22,3 18,8 11,7 7 66.9 17,9 15, 9, 8 63.2 14,7 12,2 7,1 9 59.3 12,2 1,1 5,6 1 55.3 1,3 8,5 4,4 11 51.1 8,8 7,2 3,5 12 46.6 7,5 6,1 2,7 13 41.8 6,5 5,1 2,1 14 36.5 5,6 4,4 15 3.3 4,8 3,7 16 22.8 4,1 3,1 17 11.3 3,5 2,5 PROHIBITED MIN BOOM CPCITIES 19 FT OPEN THROT TUBE BOOM 36 Rotation ngle B B 3 81.9 32,9 32,9 35 8.4 32,5 32,5 4 78.9 3,7 3,7 5 75.8 25,7 24, 6 72.6 19,6 18,4 7 69.4 16,2 14,6 8 66.2 13,3 11,9 9 62.8 11, 9,8 PROHIBITED 1 59.4 9,1 8,1 11 55.8 7,5 6,8 12 52.1 6,1 5,7 13 48.2 5, 4,8 14 44. 4, 4, 15 39.4 3,1 3,1 16 34.4 2,1 2,1 MIN BOOM CPCITIES 2 FT OPEN THROT TUBE BOOM ngle B B 35 8.9 28,6 28,6 4 79.4 27,2 27,2 5 76.5 21,5 21,5 6 73.5 17,5 17,5 7 7.5 14,2 14,2 8 67.4 11,7 11,7 9 64.3 9,5 9,5 1 61.1 7,7 7,7 11 57.8 6,2 6,2 12 54.3 5, 5, 13 5.7 3,9 3,9 14 46.9 2,8 2,8 36 Rotation PROHIBITED MIN BOOM CPCITIES 18 FT OPEN THROT TUBE BOOM ngle B B 3 81.5 37,5 37,5 35 79.9 36,8 36,8 4 78.2 33,9 33, 5 75. 28,1 24,1 6 71.6 21,9 18,6 7 68.2 17,7 14,8 8 64.8 14,5 12, 9 61.2 12,1 1, 1 57.5 1,2 8,3 11 53.6 8,6 7, 12 49.6 7,4 5,9 13 45.3 6,1 5, 14 4.6 5, 4,2 15 35.4 4,1 3,5 16 29.5 3,3 2,9 17 22.1 2,5 2,4 36 Rotation PROHIBITED 9

This page intentionally left blank 1

This page intentionally left blank 11

Link Belt Construction Equipment Company Lexington, Kentucky www.linkbelt.com Link Belt is a registered trademark. Copyright 2. ll rights reserved. We are constantly improving our products and therefore reserve the right to change designs and specifications. 12