Electrical Interface Dimensional Drawings Connector Kits

Table of Contents ISO 99/ Series...3-9 Technical and Operating Data....3- How to Order....-6 Valve and Regulator Dimensions... 7 Base Assembly... 8 Manifold Block Assembly... 9 Manifold Assembly Kits... 0 Midstation Supply and Exhaust Block.... End Plate Kits... Sandwich Pressure Regulators.... 3 Pilot ging Arrangements and Service Kits... Flow Paths for Solenoid Air Pilot Actuation.... Speed Control Kits... Transition Plate Kits... Gallery Blocking Disc Kits... Regulator Gauges... Blank Station Plate Kit.... Solenoid Assemblies... 6 Valve Service Kits and Parts....7-9 07- Series....0-30 Technical and Operating Data.... 0 How to Order....-3 Valve on Manifold Block-8 mm... Manifold Assembly-8 mm... Valve on Manifold Block-6 mm... 6 Manifold Assembly-6 mm... 7 Base Assemblies-6 mm.... 8 Adaptor Assemblies.... 8 Manifold Assembly Kits... 9 End Plate Kits... 30 Assembly Kits...3-3 Electrical Interface Dimensional Drawings... 3 Connector Kits....3-3 Numatics 009 Rev. /09

ISO 99/ Series B single solenoid position -way double solenoid 3 position -way open center double solenoid 3 Position -Way (/3), open to (A) and (B) in center B A EB P EA Solenoid Pilot Actuated A double solenoid pilot 3 Position -Way (/3), open to (A) and (B) in center double solenoid position -way double solenoid 3 position -way closed center double solenoid pilot 3 Position -Way (/3), open to (A) and (B) in center 3 Ported, -way, and 3 position, Spool & Sleeve, Cv:. to.3 Direct solenoid or solenoid pilot actuated Complies with ISO Standard 99/ ISO sizes,, 3 Terminal block for ease of wiring Side and bottom cylinder ports standard AC/ DC color-coded solenoids Sandwich regulators available -in speed control available Elimination of internal wiring NEMA /IP 6 3 Technical Data: ISO 99/ - Solenoid Air Pilot VALVE DATA ENGLISH METRIC Cv Size.3.3 Size.9.9.3.3 Flow Capacity Size 60. SCFM 80 NI/m Size 3.0 SCFM 87 NI/m.0 SCFM NI/m 80 PSIG upstream pressure to atmosphere 6 bar upstream to bar downstream Main Valve Operating Pressure Range - All Sizes Pilot Pressure Range - All Sizes 8" HG to 3 PSIG to PSIG Vacuum to 6 bar to 8.6 Bar Temperature Range (ambient) - All Sizes -0 F to + F -3.3 C to +6. C Operating Data - All solenoids are continuous duty rated VALVE DATA VDC VAC VAC VAC 0 VAC 30 VAC 0 VAC 0 Hz 60 Hz 0 Hz 60 Hz 0 Hz 60 Hz Power (watts) - All Sizes.0 Holding Current (amps) - All Sizes 0.6 0.36 0.9 0.06 0.06 0.03 0.03 In-rush Current (amps) - All Sizes 0. 0.7 0.0 0.09 0.0 0.0 Energize in Seconds -position, single, spring return Size & 0.03 0.00 -position, double, detented Sizes & 3-position, spring centered Sizes & De-energize in Seconds -position, single, spring return Size Size -position, double, detented Size Size 3-position, spring centered Size Size 0.03 0.00 0.03 0.08 0.03 0.08 3 0.0 0.09 0.0 0.09 0.0 0.07 0.0 0.07 0.0 0.07 0.0 0.07 0.03 0.08 0.03 0.08 0.03 0.08 0.03 0.08 0.03 0.03 0.0 0.0 0.0 0.03 0.03 0.00 0.08 0.09 0.07 0.07 0.08 0.08 0.036 0.060 0.066 0.036 0.060 0.066 0.03 0.03 0.067 0.03 0.03 0.067 0.03 0.03 0.067 0.03 0.03 0.067 0.03 0.0 0.069 0.03 0.0 0.069 0.036 0.0 0.068 0.036 0.0 0.068 0.039 0.07 0.07 0.039 0.07 0.07 0.038 0.06 0.07 0.038 0.06 0.07

ISO 99/ Series single solenoid position -way double solenoid 3 position -way open center Direct Solenoid Actuated B double solenoid 3 Position -Way (/3), open to (A) and (B) in center B A double solenoid position -way A double solenoid 3 position -way closed center Ported, -way, and 3 position, Spool & Sleeve, Cv:. to.3 Direct solenoid or solenoid pilot actuated Complies with ISO Standard 99/ ISO sizes,, 3 Terminal block for ease of wiring Side and bottom cylinder ports standard AC/ DC color-coded solenoids Sandwich regulators available -in speed control available Elimination of internal wiring NEMA /IP 6 EB P EA Technical Data: ISO 99/ - Direct Acting VALVE DATA Cv Size.. Size.... Flow Capacity Size. SCFM 8 NI/m Size 0.7 SCFM 66 NI/m 03. SCFM 336 NI/m 80 PSIG upstream pressure to atmosphere 6 bar upstream to bar downstream Main Valve Operating Pressure Range - All Sizes Temperature Range (ambient) - All Sizes ENGLISH 8" HG to 3 PSIG -0º F to +º F METRIC Vacuum to 6 bar -3.3º C to +6.º C Operating Data - All solenoids are continuous duty rated VALVE DATA VDC VAC 0 Hz VAC 60 Hz VAC 0 Hz 0 VAC 60 Hz 30 VAC 0 Hz 0 VAC 60 Hz Power (watts) Size & 6.0 Holding Current (amps) Size & 0. 0.9 0. 0. 0.09 0.07 0.0 0.9 0. 0. 0.09 0.07 0.0 In-rush Current (amps) All Sizes.8.3 0.63 0.8 0.3 0.9 Energize in Seconds -position, single, spring return Size & 0.038 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 -position, double, detented Sizes & 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 3-position, spring centered Sizes & 0.038 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 De-energize in Seconds -position, single, spring return Size & 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 -position, double, detented All Sizes 3-position, spring centered Size & 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

ISO 99/ Series How to Order Valves I BA M P 000 6 Valve Series and Port Size I* = ISO 99/ Size / I3 = ISO 99/ Size 3/8 I3* = ISO 99/ Size 3/8 I = ISO 99/ Size / I3* = ISO 99/ / I3 = ISO 99/ 3/ *Use for valve unit only (Mounting = 00) First letter = Actuator Second letter = Actuator BA = Solenoid Pilot w/spring Return BB = Double Solenoid BW = Solenoid Pilot w/differential Air Return SA = Direct Solenoid w/spring Return SS = Double Direct Solenoid 00 = Manifold Block without Valve Function = Position, -Way = 3 Position, -Way Center 6 = 3 Position, -Way Closed Center 7 = 3 Position -Way (/3), to (A) and (B) in Center P = Indicates Blank Station Plate Mounting 00 = Valve Unit Only 0 = 00 w/speed Control ** = Manifold Block, Side and Bottom Cylinder Ports = w/speed Control 3A = Base, Side Ports, Individual Exhaust 3B = Base, Side and Bottom Ports, Individual Exhaust 3C = 3A w/speed Control 3D = 3B w/speed Control MN = Midstation Supply and Exhaust Block without Internal Circuit Board MS = Midstation Supply and Exhaust Block with Internal Circuit Board Z = Manifold Block w/side and Bottom Ports, Single Solenoid Internal Circuit Board Z** = Manifold Block w/side and Bottom Ports, Double Solenoid Internal Circuit Board Z = Z w/speed Control Z6 = Z w/speed Control R = Z w/ribbon Cable Connector R = Z w/ribbon Cable Connector R = Z w/ribbon Cable Connector R6 = Z6 w/ribbon Cable Connector **Also Used with Function P= Blank Station Note: Standard for all ISO 99/ Valve Series is internal pilot supply from port #. Voltage 0 = /0-60 VAC 30 = 0-0/0-60 VAC 0 = 0-0/0-60 VAC 6 = VDC 00 = Use w/blank Station Plate Options 000 = No Option B = Flush Locking Manual Override Z = Extended Locking Manual Override (Direct Acting Only) A = Viton Seals on Sleeve Assembly B = Lubricant Free Assembly C*** = Internal Pilot Supply from Port 3 (Solenoid Pilot Only) D*** = Internal Pilot Supply from Port (Solenoid Pilot Only) G = -Pin Straight Mini Connector in Valve; Pin =+, =-, 3=Gnd, =+, =- X *** = External Pilot Supply Through Base or Manifold Endplates 7N = Surge Suppression (Direct Acting DC Only) 6T = Zinc Plated Solenoid Armature (Direct Acting AC Only) 7J = -Pin Straight Mini Connector in Mounting; Pin =+, =-, 3=Gnd, =+, =- 6Y = -Pin Straight Micro Connector in Mounting; Pin =Not Used, =+, 3=Com, =+ 60V = -Pin Straight Micro Connector in Valve; Pin =Not Used, =+, 3=Com, =+ ***Must use one of these options when used with RC, RQ, or RD regulators and solenoid pilot valves. Port Type 0 = NPTF (Direct Solenoid Valves)(Use for valve unit only) G = G Tap (Direct Solenoid Valves)(Use for valve unit only) (conforms to ISO standards 79- and 8-) P = NPTF (Solenoid Pilot Valves) Q = G Tap (Solenoid Pilot Valves) (conforms to ISO standards 79- and 8-) Wiring Option K = -in AC w/light L = Standard AC, Special Connector M = -in DC w/light O = Blank Station Plate R = Standard DC, Special Connector Wiring Diagrams Pin (Mini) Connector G (Valve Conduit Cover) 7J (Mounting) - + Solenoid Solenoid 3 + - Pin mm (Micro) Connector 60V (Valve Conduit Cover) 6Y (Mounting) + - Solenoid Solenoid 3 +

How to Order continued Regulators Valve Series and Port Size I* = ISO 99/ Size /" I3 = ISO 99/ Size 3/8" I3* = ISO 99/ Size 3/8" I = ISO 99/ Size /" I3* = ISO 99/ /" I3 = ISO 99/ 3/" *Use for regulator unit only (Mounting = 00) Regulator Type RS = Single Pressure to Port # (P) RD** = Dual Pressure to Ports #3 (EB) & # (EA) RC** = Dual Pressure w/non-relieving Checks Air Return (Sizes & 3 Only) RQ** = Dual Pressure w/relieving Checks RE = Dual Pressure, External Outlet **Solenoid pilot valves used with RC, RD & RQ regulators must have the pilot supply from other than internally from port # (P) Assembly Kit Pressure Range = 0-30 PSIG (0.7-9 bar) 3 = 3-30 PSIG (0. - bar) = - 60 PSIG (0.3 -. bar) 6 = 0-0 PSIG (. - 7 bar) I RS ISO 99/ Series J P 000 00 AK 0 R C 0000 N STD Options 6N = Jumper on (A) End 6P = Jumper on (B) End Port Type P = NPTF Q = G Tap Wiring Option J = -In Recepticle O = No Electrical Connection Mounting 00 = Regulator Unit Only = Manifold Block, Side and Bottom Cylinder Ports 3A = Base, Side Ports, Individual Exhaust 3B = Base, Side and Bottom Ports, Individual Exhaust Z0 = Manifold Block w/side and Bottom Ports Transfer Board, Used w/re Regulator Z = Manifold Block with Side and Bottom Ports, Single Solenoid Internal Circuit Board Z = Manifold Block with Side and Bottom Ports, Double Solenoid Internal Circuit Board Z = Z w/speed Control Z6 = Z w/speed Control R = Z w/ribbon Cable Connector R = Z w/ribbon Cable Connector R = Z w/ribbon Cable Connector R6 = Z6 w/ribbon Cable Connector Z0 = RE only (no Z-board) Electrical/Connection Type and Location 0 = Standard E* = Fieldbus Electronics (w/ Z-Board ) F* = Terminal Strip -6 J* = Pin Sub-D M* = 37 Pin Sub-D P* = Pin Round Connector Q* = 9 Pin Round Connector R* = 6 Pin Round Connector S* = 6 + Pin Round Connector T* = Terminal Strip -3 V = Fieldbus Electronics (hardwired) *Used with Z-board only. Valve Series(s) Q = ISO 99/ size R = ISO 99/ size S = ISO 99/ size 3 Number(s) of Valve Stations A = I = 9 B = J = 0 C = 3 K = D = L = E = M= 3 F = 6 N = G = 7 O = H = 8 P = 6 Maximum Solenoid Outputs TERMINAL STRIP 6 PIN SUB-D 37 PIN SUB-D 6 PIN ROUND 6 + PIN ROUND AK F AK T AK J AK M AK R AK S 3 3 3 Options STD = Standard Port Type N = NPTF G = G Tap End Plate Port Size 3 = 3/8 (Size ) = / (Size ) 6 = () X = or more valve series in one manifold assembly Valve Series and Number of stations EXAMPLE ISO manifold with side and bottom ports Station Station Station 3 PIN ROUND AK P 8 AKORCOOOONSTD I3BAMP0006 I3BBMP0006 I3BB00MP0006 I3RSJP00000 ASSEMBLED 9 PIN ROUND AK Q 6 6

ISO 99/ Series Valve Units Solenoid Pilot Actuated Direct Solenoid Actuated Dimensions Top dimensions = inches Bottom dimensions (in parenthesis) = millimeters Size Size A B C D E F G H I J DC AC DC AC DC AC 9.3 7..89 0.83.6.69.30.3 9.7 8.09 7.3.83.0 (36.7) (80.6) (.) (.0) (.9) (68.) (3.9) (8.3) (7.8) (0.) (86.6) (8.) (9.6) 0. 8.7.36 0.99.97.79..3 0.86 9.8 8. 6.3.8 (6.) (0.) (36.) (.0) (0.0) (70.8) (3.8) (33.) (7.8) (33.) (.7) (60.) (.7).6 9.7 6.0.6..93..0 9.0.86 (9.9) (3.) (3.7) (3.0) (6.0) (7.3) (30.9) (3.9) (9.8) (8.7) Sandwich Pressure Regulator A B C F END END D E H G I J K Dimensions Top dimensions = inches Bottom dimensions (in parenthesis) = millimeters A B C D E F G H I J K Size. (39.).77 (.0) 0.9 (3.3).70 (3.) 0.8 (.6).6 (6.).98 (.9) 7.0 (80.3) 7.83 (98.9).9 (8.) 3. (3.) Size. (39.).77 (.0) 0.9 (3.).0 (.3).0 (.9).6 (6.) 6.33 (60.8) 7.6 (89.) 8.8 (3.8).9 (309.6). (366.8). (39.).6 (67.3).3 (33.). (6.0).6 (3.0) 3.36 (8.3) 9. (3.) 7.7 (9.8).77 (99.0) 7. (3.).63 (37.6) 7

ISO 99/ Series Base Assembly See base assembly chart for port sizes Base Assembly Part Numbers SERIES ISO ISO ISO 3 PORT SIZE SIDE PORTS ONLY SIDE & BOTTOM PORTS / NPTF 03-88 03-8 3/8 NPTF 03-87 03-8 G / 03-89 03-83 G 3/8 03-80 03-8 3/8 NPTF / NPTF G 3/8 G / / NPTF 3/ NPTF G / G 3/ 03-89 03-830 03-83 03-83 03-837 03-838 03-839 03-80 03-833 03-83 03-83 03-836 03-8 03-8 03-83 03-8 (see page ) Receptacle Assembly Part Numbers Size Size STANDARD 30-680 30-707 WITH Z-BOARD 30-066 30-06 () Mounting holes ISO, (.3 diameter ISO and 3. (6,) diameter Receptacle assembly 30-707 30-06 () Conduit port / NPTF (G /) ISO, and 3 See base assembly chart for port sizes End brown View shown with conduit cover removed End orange See base assembly chart for port sizes Dimensions Top dimensions = inches Bottom dimensions (in parenthesis) = millimeters Size Size A B C D E F G H I J K 0.0 (.7) 0.6 (.) 0.8 (0.6).0 (.9).3 (33.3).77 (.0) 0.8 (0.8).9 (30.).33 (33.9).9 (37.8).9 (9.3).73 (69.3). (39.). (7.).8 (63.0) 0.89 (.6).3 (8.7. (38.6) 0.90 (.9).3 (8.7).3 (36.3) 3.63 (9.). (08.0).38 (36.7). (9.0).38 (3.).77 (.0).7 (7.7).7 (69.9) 3. (89.9) 0.9 (3.9).7 (37.).8 (6.7) L 0.86 (.8).06 (6.9).9 (37.8) M.37 (60.).97 (7.).09 (03.9) 8 Size Size N O P Q R S T U V W X Y.8 (.9).0 (63.).73 (69.3) 6.7 (6.3) 7.76 (97.) 9.6 (3.) 0.8 (0.8).09 (7.7).33 (33.8).33 (33.8).7 (.).0 (.3).8 (7.0).38 (60.) 3.3 (8.8 0.8 (.3).0 (6.7).63 (.).07 (7.).0 (6.7).63 (.) 0.0 (.7) 0.8 (.6).07 (7.) 0.9 (.0) 0.8 (.6).07 (7.) 0.33 (8.) 0.3 (3.3) 0.8 (0.6) 0.6 (6.) 0.78 (9.8) 0.8 (0.6) 0.63 (6.0) 0.78 (9.8) 0.8 (0.6) Z 0. (3.0)

ISO 99/ Series Manifold Block Assembly () Mounting holes per station ISO = 0.7 (.3) Dia. ISO = 0. (6.) Dia. ISO 3 = 0.33 (8.) Dia. *NOTE: ISO uses mounting hole in end plate. () Pilot Ports /8 NPTF (G /8) ISO, and 3 Used for external pilot supply (See page ). () Mounting holes per end plate ISO = 0.8 (7.0) Dia. ISO = 0.3 (9.0) Dia. ISO 3 = 0.7 (.0) Dia. (3) Side ports each end see end plate kit chart for port sizes () Side cylinder ports see manifold block kit chart for port sizes Conduit port both sides, ISO NPTF (M3 x.) ISO and 3 -/ NPTF (M0 x.) () Bottom cylinder ports see manifold block kit chart for port sizes Dimensions Top dimensions = inches Bottom dimensions (in parenthesis) = millimeters Size Size Size Size A B C D E F G H I J K L M 7.9 (8.6) 9.00 (8.6) 0.6 (69.) N O P Q R S T U V W X 0. (3.0) 0.63 (6.0) 0.83 (.).9 (.0).97 (.6) 7.0 (80.3).08 (.8).63 (66.8) 3.37 (8.6).8 (.9).9 (0.9).8 (.).8 (6.) 3.06 (77.7).0 (6.).3 (33.3).68 (.7) 0.63 (6.0) 0.86 (.8) 0.77 (9.6) 3. (79.0) 3.9 (00.).0 (8.3) 0. (3.0) 0.9 (.0) 0.70 (7.8) 0. (.0) 0.63 (6.0) 0.9 (.0) 0. (3.0) 0.9 (.0) 0.80 (0.3) 0. (.0) 0.69 (7.).0 (.9) 0.6 (6.6) 0.3 (8.) 0.9 (.).3 (33.).6 (.9).79 (.) 0.6 (6.6) 0.30 (7.6) 0.7 (.9) 0.97 (.6).6 (9.). (3.0).0 (6.). (3.8).0 (7.9).38 (3.).0 (.).0 (.3).6 (67.3) 3. (79.0).0 (63.) 3.0 (78.7).0 (0.).90 (8.3).3 (8.7).86 (7.6).0 (30.).7 (39.9).67 (.) 0.87 (.).00 (.).8 (30.0) 9

Manifold Assembly Kits with Z-Board ISO 99/ Series SERIES PORT SIZE KIT NUMBER WITH SINGLE Z-BOARD KIT NUMBER WITH DOUBLE Z-BOARD KIT NUMBER WITH SINGLE RIBBON CABLE KIT NUMBER WITH DOUBLE RIBBON CABLE / NPTF 39-8 39-93 39-3 39-93 ISO 3/8 NPTF 39-9 39-930 G / 39-30 39-933 39-33 39-3 39-93 39-937 G 3/8 39-3 39-93 39-3 39-936 3/8 NPTF 39-36 39-893 39-0 39-897 ISO / NPTF 39-37 39-89 G 3/8 39-38 39-89 39-39- 39-898 39-899 G / 39-39 39-896 39-3 39-900 / NPTF 39-39-90 39-8 39-90 ISO 3 3/ NPTF 39-39-90 G / 39-6 39-903 39-9 39-0 39-906 39-907 G 3/ 39-7 39-90 39-39-908 Manifold Assembly Kits without Z-Board SERIES PORT SIZE KIT NUMBER / NPTF 39-638 ISO 3/8 NPTF 39-637 G / 39-60 G 3/8 39-639 3/8 NPTF 39-67 ISO / NPTF 39-68 G 3/8 39-69 G / 39-60 / NPTF 39-6 ISO 3 3/ NPTF 39-6 G / 39-66 G 3/ 39-67 0

Mid-Station Supply and Exhaust Block ISO 99/ Series 9 3 6 7 0 8 NOTE: For dimensions and port locations, see page 9. DET. REQ D PART NAME with Z-Board without Z-Board Manifold Assembly: with Z-Board without Z-Board 3/8 NPTF 39-938 39-0 06-06-97 SIZE SIZE SIZE 3 G 3/8 39-939 39-0 06-6 06-98 / NPTF 39-90 39-03 06-7 06-99 G / 39-9 39-0 06-8 06-00 3/ NPTF 39-9 39-0 06-9 06-0 3-7 3-3 3-7 3 6 Lockwasher 8-70 8-7 8-87 7-09 7-7 7-3 Nut 8-3 8-3 8-36 6 Blank Station Plate 0-0-6 0-38 7 3-8 3-8 3-83 8* Transfer Board 6-8 6-790 6-80 9* Guide Pin 3-0 3-0 3-0 0 7-09 7-9 7- G 3/ 39-93 39-06 06-60 06-0 *Not required for midstation supply and exhaust blocks without Z-Board.

ISO 99/ Series End Plate Kits End Plate Kits for Non- Z-Board Manifolds SERIES PORT SIZE KIT NUMBER COMMON EXHAUST ISO 3/8 NPTF 39-63 G 3/8 39-636 ISO ISO 3 / NPTF 39-6 G / 39-63 NPTF 39-68 G 39-69 39-87 39-87 End Plate Kit with Z-Board End Plate Kits for Z-Board Manifolds SERIES PORT SIZE KIT NUMBER WITH MOUNTING COVER KIT NUMBER WITHOUT MOUNTING COVER ISO 3/8 NPTF 39-97 39-9 G 3/8 39-98 39-96 ISO ISO 3 / NPTF 39-9 G / 39-9 NPTF 39-9 G 39-96 39-99 39-90 39-93 39-9

ISO 99/ Series Sandwich Pressure Regulators Types: RS / RD / RC / RQ When ordering a valve plus regulator mounted on a base or manifold, list the valve unit only model number and include the mounting requirements only within the regulator. Specify Assembled. Example orders: TYPE RS Valve unit only: I3BA00KP00030 I3BB00KPC30 TYPE RD Regulator I3RS3AJP00000 I3RDJP00000 +mounting ASSEMBLED ASSEMBLED Type RS Type RD END END END 3 END SUPPLY Single pressure from a single supply. 3 SUPPLY Dual pressure from a single supply. Type RC Type RQ END 3 END END 3 END Type RC is Non Relieving: traps downstream pressure if upstream pressure is exhausted. Type RQ is Relieving: exhausts pressure in cylinder if upstream pressure is exhausted. 3

ISO 99/ Series Pilot ging Arrangements The Numatics valve bodies used for the ISO 99/ Series have a number of tapped pilot passages. Simply by opening or plugging certain passages, a number of different pilot supply options are available. A cross section of the valve bodies and both end views are shown below. These views show the location of all passages. The letters do not appear on the casting. They are used only to identify the ports and the locations. mm - No. 9-6 mm - No. 9-3 /6 NPTF - No 9-8 PILOT PORT L M N Q R STANDARD INTERNAL SUPPLY FROM PORT SINGLE PILOT DOUBLE PILOT EXTERNAL SUPPLY FROM PORT SINGLE PILOT DOUBLE PILOT X EXTERNAL SUPPLY FROM PORT SINGLE PILOT DOUBLE PILOT NOTE: Standard for all ISO 99/ valve series is internal supply from port #. C INTERNAL SUPPLY FROM PORT 3 SINGLE PILOT DOUBLE PILOT D INTERNAL SUPPLY FROM PORT SINGLE PILOT DOUBLE PILOT Flow Paths for Solenoid Air Pilot Actuation FROM SUPPLY PORT # TO SPOOL PORT # SUPPLY BODY TO PILOT ADAPTER PILOT INLET FROM BODY TO SPOOL PILOT SEAT EXHAUST EXHAUST PILOT ADAPTER SCREEN PILOT INLET PILOT ADAPTER ASS'Y DE-ENERGIZED PILOT INLET PILOT ADAPTER ASS'Y ENERGIZED ISO INTERNAL PORT PATH

ISO 99/ Series Speed Controls Kits The ISO speed control kit mounts between the valve unit and any base, manifold, or RS regulator. The 3 and ports of the unit contain needle valves which can be adjusted to throttle the flow of exhaust air out of the valve unit. Thus, the speeds of the two strokes of a cylinder piston can be adjusted independently on the same end of the speed control unit. Speed Control Kit Numbers SERIES PART NUMBERS DIMENSIONS A ISO 39-63 0.93" (3.6 mm) ISO ISO 3 39-6 39-66.30" (33.0 mm).63" (. mm) Transition Plate Kits ISO TO ISO ISO TO ISO ISO TO ISO 3 ISO 3 TO ISO Hardwired 39-66 39-663 39-66 39-66 With Z-Board 39-97 39-960 Gallery Blocking Disc Kits May be used to block any gallery in a manifold system. Disc Kit Numbers SERIES - GALLERY PILOT SUPPLY GALLERY ISO 39-39-6 ISO 39-39-6 ISO 3 39-3 39-63 Regulator Gauges PRESSURE RANGE PART 0-60 PSIG -03 0-60 PSIG -6 0-00 PSIG -7 0-300 PSIG -8 NOTE: Core tube not available separately. Blank Station Plate Kit Plate Kit Numbers SERIES PART NUMBERS ISO 39-6 ISO 39-6 ISO 3 39-660

ISO 99/ Series Direct Solenoid Assemblies VOLTAGES 00-/0 0-0/60 00-30/0 0-0/60 /0-60 SOLENOID CAPSULE ASS Y ISO & -POSITION 37-790 37-79 37-789 3-POSITION 37-793 37-79 37-79 SOLENOID ONLY ISO & 8-8 8-83 8-8 SOLENOID CAPSULE ASSEMBLY ISO 3 SINGLE 37-8 37-83 37-8 DOUBLE -POSITION 37-87 37-86 37-88 SOLENOIDS ISO 3 DOUBLE 3-POSITION SINGLE DOUBLE 37-80 37-89 37-8 8-7 8-73 8-7 8-77 8-76 8-78 VDC 36-38 36- -39 VDC 36-39 36-3 -0 Solenoid Pilot Assemblies VOLTAGES 0-0/60: 00-/0 (Black Coil) 0-0/60: 00-30/0 (Black Coil) /0-60 (Black Coil) VDC (.0 Watt) (Blue Coil) Includes Solenoid, Core Tube & Nut (8-37) NOTE: Core tube not available separately. PART 37-0 37-06 37-0 36-38 VDC Ribbon Cable Ribbon cable option used for manifold assemblies that exceed 6 solenoid outputs. 6

0 ISO 99/ Series Valve Service Kits and Parts - Solenoid Pilot Kit No. ISO IBP-K ISO IBP-K ISO 3 I3BP-K 6 7 Kit No. ISO IBP-K ISO IBP-K ISO 3 I3BP-K 7 6 8 7 0 8 9 3 9 3 9 7 6 8 3 9 8 0 6 7 7 6 0 6 7 3 BA Parts List DET REQ D ISO ISO ISO 3 PART NAME 0-6 0-63 0-66 Valve Body 9 09-3 7 09-7 6 809-7 3 9 Sleeve 8 Ass y w/ Seals 3* -6-70 -0 Bumper * 0-3 0-33 0-3 Detent Body 30-700 30-700 30-708 Assembly 6 7-3 7-3 7-3 7 7-80 7-80 7-80 0 8-309 6 7-309 -309 3 Receptacle Housing 9* - -8 - Spring 0* 3-9 3-9 3-6 0-3 0-98 0- Spring Cover Assembly 7-30 7-30 7-360 3 8-88 8-88 8 8-88 Lockwasher 9 7 6 8 6 9 3 8 7-60 7-30 7-7 9-78 9-78 9-7 Pilot Adaptor Assembly 6 8-70 8-7 8-70 Lockwasher 7* 3-0 3-3-9 8* 3-9 3-3-8 9 0-33 0-336 0-337 Conduit Cover 0 0 7-683 6 77-683 7-70 3 * 3-989 6-0 7-67 6-33 -989 6-0 7-67 See pg. 6-33 -990 6-0 7-6-33 Nameplate O-Ring Seal with Lockwasher Solenoid Capsule Assembly O-Ring Seal BB Parts List DET 3* * 6 7 0 8 9* 0* 3 * 6 7 8 9* 0 3 ISO ISO ISO 3 REQ D 8 PART NAME 9 0-6 7 0-63 6 8 6 9 0-66 Valve Body 3 8 09-3 09-7 09-7 Sleeve Ass y w/ Seals -6-70 -0 Bumper 0-3 0-3 0-36 Detent Body 30-699 30-699 30-76 Assembly 7-3 7-3 7-3 7-80 7-80 6 7 7-80 3-309 -309-309 Receptacle Housing 3-9 3-9 3-6 9-78 9-78 9-79 Pilot Adaptor Assembly 8-70 8-7 8-70 Lockwasher 0-33 0-336 0-337 Conduit Cover -989-989 -990 Nameplate 7-67 7-67 7- with Lockwasher 6-33 6-33 6-33 O-Ring Seal -06-06 Label 6-8 7-60 3-9 7-683 6-0 7-69 6-7-30 3-7-683 6-0 See pg. 7-69 6-9 7-7 3-8 7-70 6-0 8-87 9-3 Spacer * 3-0 3-3-9 O-Ring Seal Solenoid Capsule Assembly / Lockwasher 6 7 7-69 -06 7-69 -06 8-87 / Lockwasher Label * Indicates parts included in service kit 8 9-3 7

ISO 99/ Series Valve Service Kits and Parts - Solenoid Pilot continued Kit No. ISO IBP-K3 ISO IBP-K3 ISO 3 I3BP-K3 Valve Service Kits and Parts - Direct Solenoid Kit No. ISO ISP-K ISO ISP-K ISO 3 I3SP-K 8 9 7 6 8 6 9 3 8 8 0 8 9 3 9 3 0 0 6 7 3 6 7 7 6 BB and BB6 Parts List DET 3* * 6 7 8 9* 0* REQ D ISO ISO ISO 3 PART NAME 0-6 0-63 0-66 Valve Body 09-37 -00 6-3 30-699 7-3 7-80 -309 6-6 3-9 7-60 9-78 09-8 -6 6-3 30-700 7-3 7-80 -309 6-3-9 7-30 9-78 09-30 -08-8 30-76 7-3 7-80 -309 6-33 3-6 7-7 9-80 Sleeve Ass y w/ Seals (BB) Bumper Spacer Assembly Receptacle Housing Spacer Pilot Adaptor Assembly SA Parts List DET 3* * 6 7 8 9* 0* REQ D ISO ISO ISO 3 PART NAME 3 6 3 9 8 0 0-68 0-6 0-6 Valve Body 09-67 09-76 09-78 Sleeve Ass y w/ Seals 0-3 0-33 0-3 Detent Body 7-3 7-3 7-3 7-80 7-80 6 7 7-80 7-309 -309-309 Receptacle Housing -6 30-700 - -70 30-700 - -0 30-708 -6 Bumper 3-9 3-9 3-6 9 0-9 0-3 3 0-3 6 3 Spring Cover 8 8 0 7-30 7-30 7-360 Assembly Spring 3 8-70 8-7 8-70 Lockwasher 3 8-88 8-88 8-88 Lockwasher * 3-0 3-3-9 7-60 7-30 7-7 * 3-9 3-3-8 See p. See p. See p. Sol. Capsule Assembly 6 0-33 0-336 0-337 Conduit Cover 6 8-70 8-7 8-70 Lockwasher 7 7-683 7-683 7-70 7* 3-0 3-3-9 8-989 -989-990 Nameplate 8* 3-9 3-6 7 3-8 7 9* 6-0 6-0 6-0 O-Ring Seal 9 0-33 0-336 0-337 Conduit Cover 0 7-67 7-67 7- w/lockwasher 0 7-683 7-683 7-70 See pg. Solenoid Capsule Assembly -989-989 -990 Nameplate 3 6-33 7-69 6-33 7-69 6-33 8-87 O-Ring Seal / Lockwasher * Indicates parts - RELEASE included TO PROD. in service kit -06-06 Label * - -337 - Spring 6* 6-36 6-6-333 Spring Retainer 7 9-3 8 09-38 09-8 09-3 Sleeve Ass y w/seals (BB6) 8

8 0 8 9 3 9 3 ISO 99/ Series Valve Service Kits and Parts - Direct Solenoid continued Kit No. ISO ISP-K ISO ISP-K 6 7 ISO 3 I3SP-K 7 6 0 Kit No. ISO ISP-K3 ISO ISP-K3 ISO 3 I3SP-K3 3 6 3 9 8 0 9 9 3 6 3 8 8 0 SS Parts List 6 7 7 DET REQ D ISO ISO 9 ISO 3 PART NAME 9 3 6 3 8 8 0 0-68 0-6 0-6 Valve Body 09-70 09-77 09-79 Sleeve Ass y w/ Seals 3* * -6 0-3 -70 0-3 -0 0-36 Bumper Detent Assembly 6 30-679 7-3 30-699 7-3 30-699 7-3 Assembly 7 7-80 7-80 6 7 7-80 7 8-309 -309-309 Receptacle Housing 9* 6-8 6-6-37 Spacer 0 See p. See p. See p. Sol. Capsule Assembly 8-70 8-7 8-87 Lockwasher * - RELEASE TO PROD. 3-0 3-3-9 3* 3-9 0-33 3-0-336 3-8 0-337 Conduit Cover 7-683 7-683 7-70 6 7-989 -989-990 Nameplate 7-60 7-30 7-7 DET REQ D 6 7 7 SS and SS6 Parts List ISO ISO ISO 3 PART NAME 0-68 0-6 0-6 Valve Body 09-7 09-83 09-89 Sleeve Ass y w/ Seals (SS) 3* * 6-87 6-3 6-39 6-3 6-0 6-3 Spring Retainer Spacer 6 30-679 7-3 30-699 7-3 30-699 7-3 Assembly 7 8 7-80 -309 7-80 -309 7-80 -309 Receptacle Housing 9* 6-6 6-6-8 Spacer 0 See p. See p. See p. Sol. Capsule Assembly * 3* 8-70 3-0 3-9 0-33 8-7 3-3- 0-336 8-87 3-9 3-8 0-337 Lockwasher Conduit Cover 7-683 7-683 7-70 6 7 8* -989-989 -990 Nameplate 7-60 -0 7-30 -90 7-7 -9 Spring 9 09-7 09-8 09-87 Sleeve Ass y w/seals (SS6) * Indicates parts included in service kit 9

ISO 07- Series single solenoid air pilot position -way 3 double solenoid air pilot 3 position -way open center 3 3 3 double solenoid air pilot position -way double solenoid air pilot 3 position -way closed center Ported, and 3 position, -way, Spool & Sleeve Cv: 0.6 -. Solenoid air pilot actuated Low wattage plug-in. watt for DC application DC solenoids polarity insensitive with surge suppression together circuit boards eliminate internal wiring Integral recessed gaskets Interchangeable push-in fittings to accommodate various tube sizes Simple conversion from internal to external pilot Modular plug-together Fieldbus electronics NEMA /IP6 Technical Data - 8mm VALVE DATA English Metric Cv 0.6 0.6 Flow Capacity 6 SCFM @ 80 PSIG upstream pressure to atmosphere 80 NI/m @ 6 bar upstream to bar downstream Operating Pressure Range 8 Hg Vacuum to 0 PSIG Vacuum to 0 bar Pilot Pressure Range 6 to 0 PSIG.8 to 8. bar Temperature Range (Ambient) -0 F to + F -3 C to +6 C Operating Data ALL SOLENOIDS ARE CONTINUOUS DUTY RATED VDC 0-0 VAC 0/60 Hz. Power (Watts).. Holding Current (Amps.) 0.0 0.0 RESPONSE TIME IN SECONDS Energize De-energize Energize De-energize -Position, Single, Spring Return 0.00 0.00 0.00 0.00 -Position, Double, Detented 0.00 0.00 3-Position, Spring Centered 0.00 0.00 0.00 0.00 Technical Data - 6mm VALVE DATA English Metric Cv.0.0 Flow Capacity 6 SCFM @ 80 PSIG upstream pressure to atmosphere 80 NI/m @ 6 bar upstream to bar downstream Operating Pressure Range 8 Hg Vacuum to 0 PSIG Vacuum to 0 bar Pilot Pressure Range 6 to 0 PSIG.8 to 8. bar Temperature Range (Ambient) -0 F to + F -3 C to +6 C Operating Data ALL SOLENOIDS ARE CONTINUOUS DUTY RATED VDC 0-0 VAC 0/60 Hz. Power (Watts).. Holding Current (Amps.) 0.0 0.0 RESPONSE TIME IN SECONDS Energize De-energize Energize De-energize -Position, Single, Spring Return 0.00 0.00 0.00 0.00 -Position, Double, Detented 0.00 0.00 3-Position, Spring Centered 0.00 0.00 0.00 0.00 0

ISO 07- Series How to Order 07-8 mm Valves 0 BB B6 M N 000 6 Valve Series & Port Size 0 * = /8 (Threaded only) 0 = / (Push-in only) 0F = 6mm 0H = 8mm *Use for valve unit only (Mounting = 00). Valve Type BA = Single Solenoid Pilot, (Spring Return) w/flush Non-Locking Override BB = Double Solenoid Pilot w/flush Non-Locking Override Function = position, -way = 3 position, -way open center 6 = 3 position, -way closed center Mounting 00 = Valve unit only 0 = 00 w/speed Control B = Manifold Block w/side and Bottom Ports, Single Solenoid Internal Circuit Board w/iso 07- Interface B = Manifold Block w/side and Bottom Ports, Double Solenoid Internal Circuit Board w/iso 07- Interface B = B w/speed Control B6 = B w/speed Control C = B w/ Ribbon Cable Connector C = B w/ Ribbon Cable Connector C = B w/ Ribbon Cable Connector C6 = B6 w/ Ribbon Cable Connector Voltage 0 = /0-60 VAC 30 = 0-0/0-60 VAC 60 = VDC 6 = VDC Options B = Flush Locking Overrride M = No Override Port Type K = Push-in Fitting P = NPTF (/8 only) or Valve Unit only Q = G Tap (/8 only) Wiring Option K = -in AC w/light M = -in DC w/light NOTE: Manifold assembly kit ordering information for: Electrical interface options see page 3. Fieldbus electronics see Electronics section. Regulators 0 RS B J L 000 00 Valve Series & Port Size 0* = /8 0 = / (Push-in only) 0F = 6mm 0H = 8mm *Use for regulator unit only(mounting = 00). Regulator Type RS = Single Pressure to Port (P) RD = Dual Pressure to Ports 3 (EB) & (EA) Pressure Range = 0-30 PSIG (0.7-9 bar) 3 = 3-30 PSIG (0.- bar) = -60 PSIG (0.- bar) Mounting 00 = Regulator Unit Only B = Manifold Block w/side and Bottom Ports, Single Solenoid Internal Circuit Board w/iso 07- Interface B = Manifold Block w/side and Bottom Ports, Double Solenoid Internal Circuit Board w/iso 07- Interface B = B w/speed Control B6 = B w/speed Control C = B w/ribbon Cable Connector C = B w/ribbon Cable Connector C = B w/ribbon Cable Connector C6 = B6 w/ribbon Cable Connector Special Options H = Less Gauge 6N = Jumper on (A) End 6P = Jumper on (B) End 6W = Top Facing Gauge 6Y = Extended Gauge 63D = 6W + 6Y Extended Top Facing Gauge Port Type K = Push-in P = NPTF (/8 only) Q = G Tap (/8 only) Wiring Option J = -in Receptacle Ass y See Note Below NOTE: * Regulator gauges must be offset on alternating stations to prevent interference (see photo) * Odd numbered stations will use either standard (no option) or top facing ( 6W option) gauges. * Even numbered stations will use either extended standard ( 6Y opton) or extended top facing ( 63D option) gauges.

ISO 07- Series How to Order 07-6 mm Valves BB B6 M L 000 6 Valve Series and Port Size * = / 3 = 3/8 H = 8mm K = 0mm *Use for valve unit only (Mounting = 00) Valve Type BA = Single Solenoid Pilot, (Spring Return) w/flush Non-Locking Override BB = Double Solenoid Pilot w/flush Non-Locking Override Function = Position, -Way = 3 Position, -Way Center 6 = 3 Position, -Way Closed Center Mounting 00 = Valve Unit only 0 = 00 w/speed Control 08 = Valve Unit w/long s for ISO 07- Adaptor 09 = Valve Unit w/long s and ISO 07- Adaptor 7A = Individual Base, Side Ports, Individual Exhaust B = Manifold Block w/side and Bottom Ports, Single Solenoid Internal Circuit Board w/iso 07- Interface B = Manifold Block w/side and Bottom Ports, Double Solenoid Internal Circuit Board w/iso 07- Interface B = B w/speed Control B6 = B w/speed Control C = B w/ribbon Cable Connector C = B w/ribbon Cable Connector C = B w/ribbon Cable Connector C6 = B6 w/ribbon Cable Connector Voltage 0 = /0-60 VAC 30 = 0-0/0-60 VAC 60 = VDC 6 = VDC Options B = Flush Locking Override M = No Override 6Y = mm Electrical Connector in Conduit Port of Base Mounting only Port Type L = Push-in Fitting N = NPTF O = Valve Unit Only G = G Tap Wiring Option K = -in AC w/light M = -in DC w/light NOTE: Manifold assembly kit ordering information for: Electrical interface options see page 3. Fieldbus electronics see Electronics section. Regulators RS 3 B J L 000 00 Valve Series & Port Size * = / 3 = 3/8 H = 8mm K = 0mm *Use for regulator unit only (Mounting = 00). Regulator Type RS = Single Pressure to Port (P) RD = Dual Pressure to Ports 3 (EB) & (EA) RC = Dual Pressure w/non-relieving Checks RQ = Dual Pressure w//relieving Checks RE = Dual Pressure to Ports (A) & (B) RT = Pressure Selector Pressure Range = 0-30 PSIG (0.7-9 bar) 3 = 3-30 PSIG (0.- bar) = -60 PSIG (0. - bar) Mounting 00 = Regulator Unit only 7A = Individual Base, Side Ports, Individual Exhaust B0 = Manifold Block w/side and Bottom Ports, Transfer Board w/iso 07- Interface, Used w/re Regulators RE only (no Z-board) B = Manifold Block w/side and Bottom Ports, Single Solenoid Internal Circuit Board w/iso 07- Interface B = Manifold Block w/side and Bottom Ports, Double Solenoid Internal Circuit Boardw/ISO 07- Interface B = B w/speed Control B6 = B w/speed Control C = B w/ribbon Cable Connector C = B w/ribbon Cable Connector C = B w/ribbon Cable Connector C6 = B6 w/ribbon Cable Connector Options H = Less Gauge 6N = Jumper on (A) End 6P = Jumper on (B) End 6W = Top Facing Gauge Port Type L = Push-in Fitting N = NPTF O = Valve Unit Only G = G Tap Wiring Option J = -in Receptacle Ass y O = Non--in (Type RE only)

ISO 07- Series Manifold Assembly 07-8 mm AK J E D 0000 3 L STD Electrical/Electronics Type & Location F = Terminal Strip -6 T = Terminal Strip -3 J = Pin Sub-D M = 37 Pin Sub-D P = Pin Round Connector Q = 9 Pin Round Connector R = 6 Pin Round Connector S C = 6 + Pin Round Connector = For Fieldbus Electronics, See Electronics section. Valve Series E = 07-8 mm Number of Valve Stations A = I = 9 Q = 7 Y = B = J = 0 R = 8 Z = 6 C=3 K = S = 9 = 7 D= L = T = 0 3 = 8 E= M = 3 U = = 9 F=6 N = V = = 30 G= 7 O = W = 3 6 = 3 H=8 P = 6 X = 7 = 3 Options STD = Standard DRM = DIN Rail Mounting MUF = Muffler in End Plates DWM = DIN Rail with MUF X = External Pilot Port Type L = Push-in Fitting N = NPTF O = Valve Unit Only G = G Tap End Plate Port Size 00 3 = Port type L, N or G Port = 3/8 Port 3/ = 3/8 K = Port type L only Port = 0mm Port 3/ = 0mm 07-6 mm AK J G D 0000 3 L STD Electrical Connection Type & Location F = Terminal Strip -6 T = Terminal Strip -3 J = Pin Sub-D M = 37 Pin Sub-D P = Pin Round Connector Q = 9 Pin Round Connector R = 6 Pin Round Connector S C = 6 + Pin Round Connector = For Fieldbus Electronics, See Electronics section. Options STD = DRM = MUF = DWM A06 = = D0 = D = F0 = X = Standard DIN Rail Mounting Muffler in End Plates DIN Rail with MUF End Plate with Ports on Left End only, Mounting Plate only on Right End A06 w/din Rail Mounting A06 w/muffler in End Plates A06 w/din Rail with MUF External Pilot Valve Series G = 07-6 mm Number of Valve Stations* A = I = 9 Q = 7 Y = B = J = 0 R = 8 Z = 6 C= 3 K = S = 9 = 7 D= L = T = 0 3 = 8 E= M = 3 U = = 9 F = 6 N = V = = 30 G= 7 O = W = 3 6 = 3 H= 8 P = 6 X = 7 = 3 Port Type L = Push-in Fitting N = NPTF O = Valve Unit Only G = G Tap End Plate Port Size 3 = Port type L, N or G Port = 3/8 Port 3/ = / = Port type L only Port = / Port 3/ = 3/8 H = Port type L only Port = 8mm Port 3/ = mm K = Port type L only Port = 0mm Port 3/ = mm Maximum Solenoid Outputs Terminal Strip AK F AK T 6 3 Pin Sub-D AK J 37 Pin Sub-D AK M 3 6 Pin Round AK R 6 + Pin Round AK S 3 Pin Round AK P 8 9 Pin Round AK Q 6 * NOTE: Maximum number of valve stations is determined by: The electrical connection type. The valve type - single solenoid valves up to the maximum solenoid outputs allowed by the electrical connection type (see chart above) or a combination of single and/or double solenoid valves not to exceed the maximum number of solenoid outputs allowed. 3

ISO 07- Series Valve on Manifold Block 8 mm Dimensions top dimensions = inches bottom dimensions (in parenthesis) = millimeters A B C D E F G H I J K L 0.3 (3.).37 (.).77 (6.6).6 (8.).9 (0.8) 0.7 (8.0) 0.3 (9.0) 3.8 (96.8).0 (3.) 0.7 (9.0) 0.37 (9.) 0.9 (.)

ISO 07- Series Manifold Assembly 8 mm Dimensions top dimensions = inches bottom dimensions (in parenthesis) = millimeters A B C D E F G H I J K L M N O P.6 (8.).06 (7.0).6 (.).0 (3.7).87 (73.0).0 (3.7) 0.3 (8.7) 3.8 (96.8) 0.7 (9.0) 0.9 (.) 0.3 (3.) 0.96 (.).0 (3.).6 (37.0). (6.).99 (76.0) Q R S T U V W X Y Z AA.83 (.8) 0.90 (.).8 (.).6 (6.) 3.6 (87.).77 (6.6) 0. (3.9).9 (0.8). (3.).8 (7.0) 3.96 (00.7)

ISO 07- Series Valve on Manifold Block 6 mm C D E F G NUMATICS NUMATICS H L K B J I A Dimensions top dimensions = inches bottom dimensions (in parenthesis) = millimeters A B C D E F G H I J K L 0.07 (.8).87 (3.7) 6.6 (9.0). (33.3) 6.7 (66.9).0 (6.) 0. (3.).9 (09.0).06 (7.0) 0. (.0) 0.7 (.9).9 (0.) 6

ISO 07- Series Manifold Assembly 6 mm FF T CLEARANCE HOLE FOR M6 SCREW () REQ'D A D E C B R S NUMATICS F NUMATICS SLOW AA SLOW 3 Q G X XE XE X P G M N 3/ 3/ J K L H TYP. BB A REF. CC U DD EE / NPTF OR G / V W X Dimensions top dimensions = inches bottom dimensions (in parenthesis) = millimeters Z Y A B C D E F G H J K L M N P Q. (33.3). (36.0).6 (.0).0 (38.) 3.0 (76.8) 0.7 (8.0).9 (09.0).06 (7.0) 0.7 (.) 0.63 (6.0) 0.97 (.).9 (0.3).77 (.0) 3.3 (8.0).37 (36.) R 6.6 (9.0) S T U V W X Y Z AA BB CC 0.30 (7.6) 0.9 (7.) 6.6 (66.6). (36.). (3.8).78 (.).0 (3.3).30 (3.6) 0.70 (7.8).0 (6.7).9 (8.) DD EE FF GG 3.3 (8.). (.6).0 (.0).7 (6.) 7

ISO 07- Series Base Assemblies Adaptor Assembly 39-8 includes long screws (x) Part # 7-983 DESCRIPTION PART / NPTF* 03-0 3/8 NPTF* 03-0 G /* 03-06 G 3/8* 03-07 ISO 07-6 mm Base Adaptor (includes screws) 39-8 *Base assemblies do not include 07- adaptor plate, 39-8 must be ordered separately. Adaptor w/thru holes X 3 XE Base NOTE: ISO 07-6 mm Individual Base cannot be used with regulators or speed controls. ISO 07- Interface Adaptor Assemblies Numatics ISO 07- Interface Adaptor with thru holes is designed for use with any 8 mm DESCRIPTION or 6 mm valve or manifold. 8 mm with Thru Holes PART 39- Adaptor Assembly includes long screws Part # 7-98(39-) Part # 7-983(39-) 6 mm with Thru Holes 39- Thru holes NOTE: ISO 07- Interface Adaptor Assemblies with thru holes cannot be used with regulators or speed controls. 8

ISO Series Manifold Assembly Kits #7-70 NOTE: Manifold Assembly kits in the chart below include () screws #7-70, 07- adaptor, and mainfold. MANIFOLD ASSEMBLY KITS - 8 mm Side Port /8 NPTF G /8 / Push-in 6 mm Push-in /6 (8 mm) Push-in Bottom Port /8 NPTF G /8 / NPTF G /8 G /8 Single Z-Board 06-63 06-6 06-6 06-66 06-67 Double Z-Board 06-68 06-69 06-70 06-7 06-7 Single Z-Board w/ribbon Cable 06-73 06-7 06-7 06-76 06-77 Double Z-Board w/ribbon Cable 06-78 06-79 06-80 06-8 06-8 Kits include 07- interface adaptor plate. MANIFOLD ASSEMBLY KITS - 6 mm Side Port / NPTF 3/8 NPTF G / G 3/8 / Push-in Bottom Port / NPTF / NPTF G / G / / NPTF Single Z-Board 06-3 06-3 06-33 06-3 06-3 Double Z-Board 06-39 06-0 06-06- 06-3 Single Z-Board w/ribbon Cable 06-7 06-8 06-9 06-0 06- Double Z-Board w/ribbon Cable 06-06-6 06-7 06-8 06-9 MANIFOLD ASSEMBLY KITS - 6 mm continued Side Port 3/8 Push-in 8 mm Push-in 0 mm Push-in Bottom Port / NPTF G / G / Single Z-Board 06-36 06-37 06-38 Double Z-Board 06-06- 06-6 Single Z-Board w/ribbon Cable 06-06-3 06- Double Z-Board w/ribbon Cable 06-60 06-6 06-6 Kits include 07- interface adaptor plate. 9

ISO Series End Plate Kits 8 mm Port Type NPTF ISO8/-G Push-In Push-In PORT 3/ X, XE 3/ X, XE 3/ X, XE 3/ X, XE Port Size 3/8 3/8 /8 3/8 3/8 /8 3/8 3/8 / 0mm 0mm 6mm Kit w/o muffler, w/o DIN Rail 39-6 39-66 39-60 39-6 Kit w/o muffler, w/ DIN Rail 39-6 39-6 39-69 39-63 Kit w/ muffler, w/o DIN Rail 39-60 39-6 39-68 39-6 Kit w/ muffler, w/ DIN Rail 39-638 39-63 39-67 39-6 6 mm Port Type NPTF ISO8/-G PUSH-IN PUSH-IN PUSH-IN PUSH-IN Port 3/ X, XE 3/ X, XE 3/ X, XE 3/ X, XE 3/ X, XE 3/ X, XE Port Size 3/8 / /8 3/8 / /8 / 3/8 / 3/8 / / 8mm mm 6mm 0mm mm 6mm Kit w/o muffler, w/o DIN Rail 39-36 39-0 39-7 39-8 39-39-6 Kit w/o muffler, w/ DIN Rail 39-3 39-39 39-39-6 39-3 39- Kit w/ muffler, w/o DIN Rail 39-3 39-38 39-3 39-39- 39- Kit w/ muffler, w/ DIN Rail 39-33 39-37 39-39- 39-9 39-0 Port Type NPTF ISO8/-G PUSH-IN PUSH-IN PUSH-IN PUSH-IN Port 3/ X, XE 3/ X, XE 3/ X, XE 3/ X, XE 3/ X, XE 3/ X, XE Port Size 3/8 / /8 3/8 / /8 / 3/8 / 3/8 / / 8mm mm 6mm 0mm mm 6mm LH Ports Only Kit w/o muffler, w/o DIN Rail 39-688 39-69 39-699 39-700 39-707 39-708 LH Ports Only Kit w/o muffler, w/ DIN Rail 39-687 39-69 39-697 39-698 39-70 39-706 LH Ports Only Kit w/ muffler, w/o DIN Rail 39-686 39-690 39-69 39-696 39-703 39-70 LH Ports Only Kit w/ muffler, w/ DIN Rail 39-68 39-689 39-693 39-69 39-70 39-70 NOTE: For detailed part list and drawings, see 00/0 Section. For Accessories, see 00/0 Section. 30

Dimensional Drawings Electrical Interface Pin Sub-D 37 Pin Sub-D B A C ISO Series B A C D D E F E CLEARANCE HOLE FOR / OR 6mm SCREW CLEARANCE HOLE FOR / OR 6mm SCREW F G H G H J Dimensions top dimensions = inches bottom dimensions (in parenthesis) = millimeters A B C D E F G H Dimensions top dimensions = inches bottom dimensions (in parenthesis) = millimeters A B C D E F G H J. (36.8) 0.9 (7.) 0. (0.7).98 (7.7).3 (8.9) 0. (6.3).0 (6.0).7 (6.7). (36.8) 0.9 (7.) 0. (0.7).98 (7.7).0 (.8).3 (8.9) 0. (6.3).0 (6.0).7 (6.7) Terminal Strip -6 & -3 A B C 6 Pin & 6 + Pin Round Connector G A B D C E J F H CLEARANCE HOLE FOR / OR 6mm SCREW L 3/ NPT CONDUIT CONNECTION F CLEARANCE HOLE FOR / OR 6mm SCREW H G J K D E Dimensions top dimensions = inches bottom dimensions (in parenthesis) = millimeters Dimensions top dimensions = inches bottom dimensions (in parenthesis) = millimeters A B C D E F G H J K L A B C D E F G H J.8 (7.9).00 (.) 0.9 (7.).98 (7.7).3 (8.9) 0.3 (0.9) 0. (6.3).0 (6.0).8 (0.).9 (7.9). (9.0).00 (.) 0.9 (7.).98 (7.7).0 (6.0) 0. (6.3).66 (.).6 (0.9) 0.8 (0.8).3 (8.9) 3

ISO Series -6 & -3 Terminal Strip Kit NOTE: External fusing or output protection recommended. 6 Pin & 6 + Pin Round Connector Kit TERMINAL STRIP HOUSING KITS Parts List DET. 3 6 REQ D PART NAME PART Lockwasher Backplane Board Cover Strap Cover PART -6 Solenoid 39-9 -3 Solenoid 39-3 7-697 8-88 6-68 -77 3-33 0-0 7 7-8 8 7-38 9 DIN Rail Cover PT 0 Converter BRD 3 Housing Terminal Strip (-6) 6 Terminal Strip (7-3) 7 Adapter 8 9 0 Lockwasher ROUND CONNECTOR KITS Parts List DET. 3 REQ D 0-03 7-80 6-6 7-79 3-3 -8 6-67 6-69 9-69 3-7-879 8-9 PART NAME PART Cover (6 Pin only) Cover (6 + Pin only) 6 PCB Assembly 6 + PCB Assembly PART 6 Pin 39-8 6 + Pin 39-376 0-08 0-3-3 3-33 6-6 6-688 7-87 6 Lockwasher 8-9 7 Hex Nut 8 Assembly 7-396 9 3 0 Shield (6 + Pin only) (6 + Pin only) 3 (6 + Pin only) 8-93 7-80 7-770 0-79 0-79 7-8 NOTE: External fusing or output protection recommended. 3 6 Pin 6 Pin + Pin POLE ROUND FEMALE CABLE 0 AWG-UNSHIELDED USED WITH 6 + POLE MANIFOLDS (AKS) 30-960 - Connector w/o cable - solder cup version 30-879 - Connector w/o cable - crimp contact version Meter - CC0MB00000000 Meter - CC0MB00000000 0 Meter - CC0MB00000000 6 POLE ROUND FEMALE CABLE 0 AWG-UNSHIELDED USED WITH 6 + & 6 POLE MANIFOLDS (AKR) & (AKS) 30-070 - Connector w/o cable - solder cup version 30-7 - Connector w/o cable - crimp contact version Meter - CC60MB00000000 Meter - CC60MB00000000 0 Meter - CC60MB00000000

ISO Series Pin Sub-D Connector Kit 39-7 Parts List DET. 3 6 REQ D PART NAME PART Housing Hex PBC Assembly 0-0 7-8 3-3 7-38 6-607 3-07 7 Assembly 7-396 NOTE: External fusing or output protection recommended. 37 Pin Sub-D Connector Kit 39-80 Parts List DET. 3 6 REQ D PART NAME PART Housing Hex PBC Assembly 0-0 7-8 3-3 7-38 6-608 3-30 7 Assembly 7-396 NOTE: External fusing or output protection recommended. 33

ISO Series (03, 00/0) Pin Round Connector Kit 39-6 8 0 0 9 Parts List DET. 3 6 REQ D PART NAME PART Cover Shield P.C. Board Assembly 0-7-98 0-79 7-87 3-3 6-86 7 3 7-8 8 9 0 Assembly Nut 3-3 7-396 8-88 Lock Washer 8-3 3 NOTE: External fusing or output protection recommended. PIN ROUND CONNECTOR PINS -8 INPUTS PINS 9-0 COMMON PIN NOT USED PIN EARTH GROUND 39-9 Pin Round Connector Kit 39-037 39-307 0 8 9 7 6 Parts List DET. 3 6 REQ D 3 PART NAME PART End Plate Nameplate 7-396 0- -08 7-98 7-8 3-3 7 Nut 8-88 8 9 0 Lock Washer P.C. Board Assembly Shield Label 8-3 6-90 7-87 0-79 -770 9 PIN CONNECTOR 3 PIN = COIL PIN = COIL PIN 3= COIL 7 PIN = COIL PIN = COIL 3 PIN 6= COMMON PIN 7= COIL PIN 8= COIL 6 PIN 9= COIL 0 PIN 0= COIL PIN = COIL 3 PIN = P.E. PIN 3= COIL PIN = COIL 8 PIN = COIL PIN 6= COIL PIN 7= COIL 9 PIN 8= COIL 6 PIN 9= N.C. NOTE: External fusing or output protection recommended. 3

WORLD HEADQUARTERS USA Numatics, Incorporated 680 Dylan Drive Novi, Michigan 8377 P: -888-Numatics -888-686-8 Canada Numatics, Ltd P: 9--777 Mexico Numatics de Mexico S.A. de C.V. P: --8-676 For a comprehensive listing of all Numatics production and distribution facilities worldwide, visit: www.numatics.com Numatics Inc. 008 LT-G3Catalog.0 0M-TGI-/08