Core innovation Body perfection New pistol air screwdrivers 15C
New pistol air screwdrivers 15C The future of tightening is already here The very modern air screwdrivers 15C introduce within the tightening scenery a new higher reference standard, in terms of quality and performance. They represent the ideal solution to obtain speed, power and efficiency in every assembly operation. Hanging ring for balancer use Safe, practical and precise clutch adjustment system Quick-change chuck with easy and safe use ROLLBOX reduction gear system, ensuring high output Low effort button with gradual starting system Patented TRACS 2 (Torque Repeatability and Accuracy Control System) torque control system; it guarantees high torque repeatability and vibration levels below 2,5 m/s 2 Reduced weight thanks to the use of light alloys Usable both for right and left hand operators 15C: Innovation continues
Recyclable materials Comfortable and reduced effort reverse button Technologically advanced MOTRIX air motor, ensuring higher performances Ergonomic grip with no slip sheath for safe and comfortable tool holding Patented silencing system OIL - FREE The possibility of using non lubricated air eliminates the emission of oil fog into the environment Possibility of conveying air exhaust Reliability Productivity Ergonomics Ecology
Be demanding Don t be satisfied with the maximum Reliability Productivity Real size 1:1 Long lifetime of the components thanks to careful design and to quality of the productive process which results in less maintenance and repair costs MOTRIX: newly conceived air motor ensures long lifetime, high specific power and maximum torque ROLLBOX: new reduction gear system has been designed to guarantee maximum output, long lifetime of the kinematic chain and reduced noise level TRACS 2 (Torque Repeatability and Accuracy Control System): the new torque control system ensures a very high torque repeatability, i.e. a very low Mean Shift value also in the presence of variability of the joint softness level. This system maintains same torque values for hundreds of thousands of cycles. TRACS 2 system guarantees a high quality improvement in the tightening process Considerable increase of the efficiency of the tightening cycle thanks to innovative systems MOTRIX: innovative project principles guarantee a higher rotating speed of the new air motor with equal tightening torque, with evident reduction of tightening cycle time TRACS 2: the modern torque control system reduces to a minimum level the need of quality control at the end of the assembly process, with a remarkable increase of the tightening cycle productivity Quick change chuck: it favours easier and safer bit replacement; it is available upon request, also for use of double insert bits Clutch adjustment system: safe, practical and accurate Grip design: it permits extraordinary ease in handling the screwdriver with less operator fatigue and significant increase of the productivity Cycle end acoustic signal: emitted by the tightening torque control system permits the operator to pass on to the next tightening cycle more rapidly
Perfection is in your hands Naturally innovative Ergonomics Ecology Optimization of the tool performances in regard to ergonomics and operator safety Innovative systems designed paying even more attention with respect to environment and of its safeguard Ergonomic grip: designed according to modern biomechanics principles paying particular attention to the features of the female hand. The grip is manufactured with an ergonomic sheath made of no slip material making it easier to hold the screwdriver, increasing the hand grip, improving the handling, the thermal isolation and operator's comfort Low effort starting button: it reduces finger fatigue TRACS 2: the modern torque control system reduces the reaction to the operator's hand. Thanks to the immediate automatic air-shut-off system with the careful study of the internal gears, the vibration levels are below 2,5 m/s 2 (ISO 82-7) Comfortable reverse button: usable both for right and left hand operators Possibility of conveying air exhaust away from the operator Reduced weight thanks to the use of light alloys Hanging ring for balancer use eliminating any operator s effort Patented silencing system: these screwdrivers are extremely noiseless and are equipped with a controlled spread of the exhaust air Ergotech project Fiam optimizes the performances of its tools and offers consulting e qualified training for the correct use of the screwdrivers MOTRIX: the advanced technological design of the air motor permits very high decrease of compressed air consumption, without affecting tool performance ROLLBOX: thanks to the new inner kinematic motions which optimize efficiency, the available power is being transmitted with minimum dispersions TRACS 2: the torque control system has a high running speed which reduces the working time of the screwdriver and the compressed air consumption OIL - FREE: 15C screwdrivers work at maximum efficiency without need of lubrication guaranteeing in such the absence of oil exhaust into the working environment 15C...APA 15C...AP Forward pistol grip: indicated when balancing systems cannot be used, and where it does not need a particular push along the fastening axis Pistol grip: indicated for situations in which screwdriving operations require thrust along the screwdriving axis This screwdriver is particularly suitable to the female hand
Type of screwdriver Grip min. Tightening torque on soft joint max. Idle speed Starting system Reversibility Weight Dimensions (mm) Air consumption Accessories Noise level* Vibrations Model Code Type Nm Nm r.p.m. Type Type kg Øxlxh l/s Drive dba m/s 2 15C2APA 112514522 0, 2,2 2200 0,70 31x178x15 15C3APA 112514523 0,4 3,5 1400 31x178x15 15C4APA 15C5APA 15C2AP 15C3AP 15C4AP 15C5AP Legend Push button 112514524 112514525 112514532 112514533 112514534 112514535 0,4 4,5 0,4 5,0 0, 2,2 0,4 3,5 0,4 4,5 0,4 5,0 950 50 2200 1400 950 50 0,70 31x178x15 31x178x15 15 = Power of the motor in Watt/10 C = Screwdriver 2 = Maximum tightening torque in Nm A = Air shut-off system P = Pistol Grip PA = forward pistol grip Legend Reversibility: all models are suitable for tightening and untightening operation Push button Other technical features Model 15C2... 15C3... 15C4... 15C5... Model 15C... Clutch spring The figures shown are measured at a pressure of,3 bar (ISO 2787), the recommended operating pressure. The tightening torque values have been measured in accordance with ISO 5393 standard. Noise level has been measured in accordance with ISO 3744 and ISO 15744 standards. Additional factor: 3 dba spread in method and production (ISO * 15744). Vibrations level have been measured in accordance with ISO 82-1 and ISO 82-7 standards. Accessory drive: female hexagonal drive 1/4",,35 mm (ISO 1173). The code number must be used when ordering. Assembled on the tool Supplied grey colour - Ø wire 3,2 mm black colour - Ø wire 2,2 mm Code 595103202 Code 595102204 Tightening torque on soft joint (Nm) 0,8 2,2 0,8 3,5 0,8 4,5 0,8 5 Air inlet 1/4'' gas 0, 1,2 0,4 1,2 0,4 1,2 0,4 1,2 The data given in the table are indicative and can be changed without prior notice. The torque values are purely indicative and may be influenced by the softness of the type of joint, by the type and length of the screw, by the pressure and quantity of air supply, and by the type of accessory used. The values indicated for noise and vibration levels were obtained in the laboratory, performing tests that comply with the standards stated, but alone are not sufficient for calculating risks. Values measured in the single work places may be higher than those stated. The values of actual exposure and consequent risks are specific and depend on the operator's method of work, the type of work piece and the work place, as well as the operator's time of exposure and his physical conditions. Fiam cannot be held responsible for any consequences deriving from the use of the information in the table when evaluating risks in the work place over which Fiam has no control. For all further details, please apply to the Fiam Technical Consultancy Service. Tightening torque on soft joint (Nm) Recommended hose bore Ø 5 mm 15C air screwdrivers are designed for use with lubricated and unlubricated compressed air January 2007-3 Printed on recycled paper for the safeguard of the environment Copyright Fiam Spa. The unauthorised distribution and/or reproduction of all or part of this publication is strictly forbidden. Standard equipment (supplied with the tool) Accessories available upon request Models available upon request Clutch adjustment key Additional clutch spring Hanging ring Use and maintenance manual Eco-friendly packaging Bits, sockets,etc., balancers, exhaust silencers and other compressed air system accessories: (see Accessories catalogue) Models with only right hand rotation Models with only left hand rotation Please apply to the Fiam Technical Consultancy Service Fiam Utensili Pneumatici Spa Viale Crispi 123-3100 Vicenza - Italy Tel. +39.0444.385000 - Fax +39.0444.385002 customerservice@fiamairtools.com www.fiamairtools.com FIAM PRODUCTS ONLY USE QUALITY COMPONENTS