Builder Kits, Bends, Tubing & Components Header Builder Tubing Kits - V10, V8, and V6 Basic Kit TU-HBK-1500-MS-1 1 1/2 (.065") Includes (8) 180 degree, () 90 Degree and 22.8 TU-HBK-1625-MS-1 1 5/8 (.065") () 5 Degree Bends. 16 BENDS TOTAL! 227.0 TU-HBK-1750-MS-1 1 / (.065") Add ons: Collector Kits, Flanges, Alignment Tool, 29.6 TU-HBK-1875-MS-1 1 7/8 (.065") Street or Race Mufflers, Cat-Back Exhaust Builder Kits 2.76 TU-HBK-2000-MS-1 2 (.065") Combine order and save additional 10% on add-ons! 26.00 TU-HBK-2250-MS-1 2 1/ (.065") (Note for v10 builders: For complex systems you may want to 18.00 TU-HBK-2500-MS-1 (.065") add additional bends to the basic kit) 21.20 Deluxe Kit Part Number Tubing OD" Material Wall Thickness Centerline Radius Description Retail TU-HBK-1500-MS-2 1 1/2 (.065") Includes the basic kit with (10) 180 degree, 6.88 TU-HBK-1625-MS-2 1 5/8 (.065") (8) 90 Degree, and (8) 5 Degree bends 66.6 TU-HBK-1750-MS-2 1 / (.065") 26 BENDS TOTAL! 86.2 TU-HBK-1875-MS-2 1 7/8 (.065") 91.82 TU-HBK-2000-MS-2 2 (.065") 19.10 TU-HBK-2250-MS-2 2 1/ (.065") Street or Race Mufflers, Cat-Back Exhaust Builder Kits 517.20 TU-HBK-2500-MS-2 (.065") Combine order and save additional 10% on add-ons! 52.60 * Availablility limited. 0 Stainless Steel Header Builder Tubing Kits - V10, V8, and V6 Basic SS Kit TU-HBK-1500-SS-1 1 1/2 0 SS (.065") Includes (8) 180 degree, () 90 Degree and 5.18 TU-HBK-1625-SS-1 1 5/8 0 SS (.065") () 5 Degree Bends - 16 BENDS TOTAL! 68.50 TU-HBK-1750-SS-1 1 / 0 SS (.065") Add ons: Collector Kits, Flanges, Alignment Tool, 0.1 TU-HBK-1875-SS-1 1 7/8 0 SS (.065") Street or Race Mufflers, Cat-Back Exhaust Builder Kits 0.00 TU-HBK-2000-SS-1 2 0 SS (.065") Combine order and save additional 10% on add-ons! 505.12 TU-HBK-2250-SS-1 2 1/ 0 SS (.065") (Note for v10 builders: For complex systems you may want to 659.12 TU-HBK-2500-SS-1 0 SS (.065") add additional bends to the basic kit) 659.12 Deluxe SS Kit Part Number Tubing OD" Material Wall Thickness Centerline Radius Description Retail TU-HBK-1500-SS-2 1 1/2 0 SS (.065") Includes the basic kit with (10) 180 degree, 55.16 TU-HBK-1625-SS-2 1 5/8 0 SS (.065") (8) 90 Degree, and (8) 5 Degree bends 578.60 TU-HBK-1750-SS-2 1 / 0 SS (.065") 26 BENDS TOTAL! 69.88 TU-HBK-1875-SS-2 1 7/8 0 SS (.065") 708.0 TU-HBK-2000-SS-2 2 0 SS (.065") 805.6 TU-HBK-2250-SS-2 2 1/ 0 SS (.065") Street or Race Mufflers, Cat-Back Exhaust Builder Kits 1,01.0 TU-HBK-2500-SS-2 0 SS (.065") Combine order and save additional 10% on add-ons! 1,01.0 * Availablility limited. DUAL TURBO Header Builder Tubing Kits - V10, V8, and V6 TU-DTHBK-1625-MS-B 1 5/8 (.065") Includes (8) 180 degree U-Bends 116.60 TU-DTHBK-1750-MS-B 1 / (.065") Add ons: Collector Kits, Flanges, Alignment Tool, 12.20 TU-DTHBK-1875-MS-B 1 7/8 (.065") Street or Race Mufflers, Cat-Back Exhaust Builder Kits 127.60 TU-DTHBK-2000-MS-B 2 (.065") (Complex systems/v10 you may want to add additional bends) 15.20 0 Stainless Steel TU-DTHBK-1625-SS-B 1 5/8 0 SS (.065") Includes (8) 180 degree U-Bends 211.20 TU-DTHBK-1750-SS-B 1 / 0 SS (.065") Add ons: Collector Kits, Flanges, Alignment Tool, 211.20 TU-DTHBK-1875-SS-B 1 7/8 0 SS (.065") Street or Race Mufflers, Cat-Back Exhaust Builder Kits 228.80 TU-DTHBK-2000-SS-B 2 0 SS (.065") (Complex systems/v10 you may want to add additional bends) 272.80 1 of 6 /8/2017
Inline Header Builder Tubing Kits TU-HBK-1500-MS 1 1/2 (.065") Includes () 180 degree, (2) 90 Degree and 112.2 TU-HBK-1625-MS 1 5/8 (.065") (2) 5 Degree bends 11.52 TU-HBK-1750-MS 1 / (.065") Add ons: Collector Kits, Flanges, Alignment Tool, 119.68 TU-HBK-1875-MS 1 7/8 (.065") Street or Race Mufflers, Cat-Back Exhaust Builder Kits 121.88 0 Stainless Steel TU-HBK-1500-SS 1 1/2 0 SS (.065") Includes () 180 degree, (2) 90 Degree and 172.59 TU-HBK-1625-SS 1 5/8 0 SS (.065") (2) 5 Degree bends 18.25 TU-HBK-1750-SS 1 / 0 SS (.065") Add ons: Collector Kits, Flanges, Alignment Tool, 202.07 TU-HBK-1875-SS 1 7/8 0 SS (.065") Street or Race Mufflers, Cat-Back Exhaust Builder Kits 220.00 Turbo Aircooled VW Header Builder Tubing Kits Part Number Tubing OD " Material Wall Thickness Centerline Radius " Description Retail TU-VWTHBK-1625-MS 1 5/8 (.065") Includes (2) 180 degree bends, (8) 90 degree bends 171.27 TU-VWTHBK-1750-MS 1 / (.065") and () feet straight tubing 181.72 TU-VWTHBK-1875-MS* 1 7/8 (.065") Add ons: Collector, Flanges, Alignment Tool, Turbo 191.0 TU-VWTHBK-2000-MS* 2 (.065") transitions or Race Mufflers, bends for Turbo inlet or outlet. 195.80 0 Stainless Steel Part Number Tubing OD " Material Wall Thickness Centerline Radius " Description Retail TU-VWTHBK-1625-SS 1 5/8 0 SS (.065") Includes (2) 180 degree bends, (8) 90 degree bends 270.60 TU-VWTHBK-1750-SS 1 / 0 SS (.065") and () feet straight tubing 10.2 TU-VWTHBK-1875-SS* 1 7/8 0 SS (.065") Add ons: Collector, Flanges, Alignment Tool, Turbo 5.28 TU-VWTHBK-2000-SS* 2 0 SS (.065") transitions or Race Mufflers, bends for Turbo inlet or outlet. 68.28 * May not be suitable for OE style heads and requires special flanges Lakester and Line Fire Header Builder Tubing Kits - For V8, V6, and Flathead - 16 gauge Part Number Tubing OD" Material CLR Cone Dimension Description Retail TU-LBK-1500-MS 1 1/2 1.5"x.75"x28" - 18g Includes (2) 90 degree bends, () 2 foot sections of straight tubing, 126.18 TU-LBK-1625-MS 1 5/8 1.625"x"x0" - and (2) cones. OR, personalize by using bends instead of tubing! 10.6 TU-LBK-1750-MS 1 / *1.75"x"x28.5" - Add-ons: Flanges, Block-Offs, Baffles 12.66 TU-LBK-1875-MS 1 7/8 *1.875xx27- Cones can be modifed to other dimensions. Other cones 15.5 TU-LBK-2000-MS 2 2"x.50"x27" - can be sustituted from stock list as a special order. 1.5 *NOTE: After modification. Supplied cone is 1.625"x"x0" - requires modification to match desired diameter from the stock cone dimension. 0 Stainless Steel - 16 gauge Part Number Tubing OD" Material CLR Cone Dimension Description Retail TU-LBK-1500-SS 1 1/2 Stainless Steel 1.5"x.75"x28" - 20g Includes (2) 90 degree bends, () 2 foot sections of straight tubing, 275.02 TU-LBK-1625-SS 1 5/8 Stainless Steel *1.625"x.75"x26.5" - 20g and (2) cones. OR, personalize by using bends instead of tubing! 276.67 TU-LBK-1750-SS 1 / Stainless Steel *1.75"x.75"x25" - 20g Add-ons: Flanges, Block-Offs, Baffles 289.65 TU-LBK-1875-SS 1 7/8 Stainless Steel *1.875"x.75"x2.5" - 20g Cones can be modifed to other dimensions. Other cones 0.8 TU-LBK-2000-SS 2 Stainless Steel 2"X.5"X27" - 18g can be sustituted from stock list as a special order. 65.66 *NOTE: After modification. Supplied cone is 1.50"x.75"x28" - requires modification to match desired diameter from the stock cone dimension. 2 of 6 /8/2017
Individual Bends, Tubing, and Accessories 180 Degree Mandrel U-Bends Part Number TU-UB16MS-100-00 TU-UB16MS-125-250 TU-UB16MS-18-250 TU-UB16MS-150-250 TU-UB16MS-16-250 TU-UB16MS-175-00 TU-UB16MS-188-00 TU-UB16MS-200-00 TU-UB16MS-225-00 TU-UB16MS-250-00 Tubing OD 1 1 1/ 1 /8 1 1/2 1 5/8 1 / 1 7/8 2 2 1/ Tubing Wall Leg Length Centerline Radius " " Description Tubing Wall Leg Length Leg Length +/-.5" Centerline Radius " " Description Retail 1.75 1.92 15.0 1.0 1.58 15.0 15.95 18.15 19.80 19.80 Retail 19.00 19.97 2.20 2.20 26.0 26.0 28.60.10 6.20 6.20 16 gauge 0 Stainless Steel Part Number TU-UB16SS-100-00 TU-UB16SS-125-180 TU-UB16SS-18-250 TU-UB16SS-150-250 TU-UB16SS-16-250 TU-UB16SS-175-00 TU-UB16SS-188-00 TU-UB16SS-200-00 TU-UB16SS-225-00 TU-UB16SS-250-00 * Availablility limited. Tubing OD 1 1 1/ 1 /8 1 1/2 1 5/8 1 / 1 7/8 2 2 1/ 180 Degree U-Bend Cutting Fixtures Make consistent cuts across the tangent to ease fabrication! Marrked at 10 degree increments as well as major markings at 5 and 90 degrees. REUSABLE! Mix-and-match: Buy different sizes for only 80 - save 20 off individual prices. Part Number TO-CF-1000-00 TO-CF-1250-250 TO-CF-175-250 TO-CF-1500-250 TO-CF-1625-250 TO-CF-1750-250 TO-CF-1750-00 TO-CF-1875-00 TO-CF-2000-00 TO-CF-2125-00 TO-CF-2250-00 TO-CF-2500-00 TO-CF-000-00 TO-CF-000-600 of 6 Tube OD" 1 1 1/ 1 /8 1 1/2 1 5/8 1 / 1 / 1 7/8 2 2 1/8 2 1/ Centerline Radius " 6 Description Fixtures can accommodate bends slightly +/- 180 degrees. Bends beyond tolerance can usually be adjusted to fit fixture. Maximum leg length of fixture is 6.25" beyond tangent. Great for re-using scraps and cut-offs! Retail 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 /8/2017
90 Degree Mandrel Bends Part Number Tubing OD Tubing Wall Leg Length A/B Centerline Radius " Description Retail TU-9016MS-100-00 1 " 12.10 TU-9016MS-125-250 1 1/ " x 9" 12.10 TU-9016MS-18-250 1 /8 " x 9" 11.28 TU-9016MS-150-250 1 1/2 " x 9" 1.0 TU-9016MS-16-250 1 5/8 " x 9" 1.0 TU-9016MS-175-00 1 / " x 9" 15.0 TU-9016MS-188-00 1 7/8 " x 9" 15.0 TU-9016MS-200-00 2 " x 9" 15.0 TU-9016MS-225-00 2 1/ 20.90 TU-9016MS-250-75 20.90 16 gauge 0 Stainless Steel TU-9016SS-100-00 1 " 18.00 TU-9016SS-125-250 1 1/ " x 9" 19.25 TU-9016SS-18-250 1 /8 " x 9" 20.00 TU-9016SS-150-250 1 1/2 " x 9" 20.5 TU-9016SS-16-250 1 5/8 " x 9" 21.18 TU-9016SS-175-00 1 / " x 9" 25.85 TU-9016SS-188-00 1 7/8 " x 9" 27.50 TU-9016SS-200-00 2 " x 9" 0.25 TU-9016SS-225-00 2 1/ 8.50 TU-9016SS-250-00 8.50 * Availablility limited. Leg Length +/- 1" 5 Degree Mandrel Bends TU-516MS-100-00 1 " 10.75 TU-516MS-125-250 1 1/ " x 10" 11.28 TU-516MS-18-250 1 /8 " x 10" 12.71 TU-516MS-150-250 1 1/2 " x 10" 1.1 TU-516MS-16-250 1 5/8 " x 10" 1.1 TU-516MS-175-00 1 / " x 10" 1.6 TU-516MS-188-00 1 7/8 " x 10" 1.6 TU-516MS-200-00 2 " x 10" 1.0 TU-516MS-225-00 2 1/ 19.00 TU-516MS-250-00 19.80 16 gauge 0 Stainless Steel TU-516SS-100-00 1 " 16.25 TU-516SS-125-250 1 1/ " x 10" 17.55 TU-516SS-18-250 1 /8 " x 10" 16.9 TU-516SS-150-250 1 1/2 " x 10" 17.55 TU-516SS-16-250 1 5/8 " x 10" 18.15 TU-516SS-175-00 1 / " x 10" 22.9 TU-516SS-188-00 1 7/8 " x 10" 25.0 TU-516SS-200-00 2 " x 10" 27.8 TU-516SS-225-00 2 1/.88 TU-516SS-250-00.88 * Availablility limited. Leg Length +/- 1" 18 Degree Mandrel Bends TU-1816MS-125-250 1 1/ 11.71 TU-1816MS-18-250 1 /8 " x 10" 11.71 TU-1816MS-150-250 1 1/2 " x 10" 1.1 TU-1816MS-16-250 1 5/8 " x 10" 1.1 TU-1816MS-175-00 1 / " x 10" 1.6 TU-1816MS-188-00 1 7/8 " x 10" 1.6 TU-1816MS-200-00 2 " x 10" 1.0 TU-1816MS-225-00 2 1/ 1.85 TU-1816MS-250-00 1.85 16 gauge 0 Stainless Steel TU-1816SS-125-250 1 1/ 16.9 TU-1816SS-18-250 1 /8 " x 10" 16.9 TU-1816SS-150-250 1 1/2 " x 10" 17.55 TU-1816SS-16-250 1 5/8 " x 10" 18.15 TU-1816SS-175-00 1 / " x 10" 22.9 TU-1816SS-188-00 1 7/8 " x 10" 25.0 TU-1816SS-200-00 2 " x 10" 27.8 TU-1816SS-225-00 2 1/ 28.60 TU-1816SS-250-00 28.60 * Availablility limited. Leg Length +/- 1" of 6 /8/2017
STRAIGHT TUBING 16 GAUGE Part Number Tubing OD" Length Material Wall Thickness Description Retail TU-ST16MS-1000 1 2' MS For general fabrication 1.1 TU-ST16MS-1250 1.25 2' MS For general fabrication 1.1 TU-ST16MS-175 1.75 2' MS For general fabrication 1.1 TU-ST16MS-1500 1.5 2' MS For general fabrication 1.86 TU-ST16MS-1625 1.625 2' MS For general fabrication 1.86 TU-ST16MS-1750 1.75 2' MS For general fabrication 1.86 TU-ST16MS-1875 1.875 2' MS For general fabrication 18.15 TU-ST16MS-2000 2 2' MS For general fabrication 18.15 TU-ST16MS-2125* 2.125 2' MS For general fabrication 18.15 TU-ST16MS-2250 2.25 2' MS For general fabrication 18.15 TU-ST16MS-2500 2.5 2' MS For general fabrication 19.6 TU-ST16MS-000 2' MS For general fabrication 20.57 16 gauge 0 Stainless Steel Part Number Tubing OD" Length Material Wall Thickness Description Retail TU-ST16SS-1000 1 2' SS For general fabrication 2.20 TU-ST16SS-1250 1.25 2' SS For general fabrication 2.20 TU-ST16SS-175 1.75 2' SS For general fabrication 2.20 TU-ST16SS-1500 1.5 2' SS For general fabrication 2.20 TU-ST16SS-1625 1.625 2' SS For general fabrication 2.20 TU-ST16SS-1750 1.75 2' SS For general fabrication 25.1 TU-ST16SS-1875 1.875 2' SS For general fabrication 29.0 TU-ST16SS-2000 2 2' SS For general fabrication 29.0 TU-ST16SS-2125* 2.125 2' SS For general fabrication 1.6 TU-ST16SS-2250 2.25 2' SS For general fabrication 1.6 TU-ST16SS-2500 2.5 2' SS For general fabrication.88 TU-ST16SS-000 2' SS For general fabrication 6.0 * Limited Availability STRAIGHT TUBING 18 GAUGE 18 gauge * Part Number Tubing OD" Length Material Slip fit for Description Retail TU-ST18MS-1250 1.25 12" MS 1.125 Slip-Fit Collector 1.125" primary to 1.25" collector 6.66 TU-ST18MS-175 1.75 12" MS 1.25 Slip-Fit Collector 1.25" primary to 1.75" collector 6.66 TU-ST18MS-1500 1.5 12" MS 1.75 Slip-Fit Collector 1.75" primary to 1.50" collector 6.66 TU-ST18MS-1625 1.625 12" MS 1.5 Slip-Fit Collector 1.50" primary to 1.625" collector 6.66 TU-ST18MS-1750 1.75 12" MS 1.625 Slip-Fit Collector 1.625" primary to 1.75" collector 6.66 TU-ST18MS-1875 1.875 12" MS 1.75 Slip-Fit Collector 1.75" primary to 1.875" collector 9.08 TU-ST18MS-2000 2 12" MS 1.875 Slip-Fit Collector 1.875" primary to 2.00" collector 9.08 18 gauge 0 Stainless Steel* Part Number Tubing OD" Length Material Slip fit for Description Retail TU-ST18SS-1250 1.25 12" SS 1.125 Slip-Fit Collector 1.125" primary to 1.25" collector 12.10 TU-ST18SS-175 1.75 12" SS 1.25 Slip-Fit Collector 1.25" primary to 1.75" collector 12.10 TU-ST18SS-1500 1.5 12" SS 1.75 Slip-Fit Collector 1.75" primary to 1.50" collector 12.10 TU-ST18SS-1625 1.625 12" SS 1.5 Slip-Fit Collector 1.50" primary to 1.625" collector 12.10 TU-ST18SS-1750 1.75 12" SS 1.625 Slip-Fit Collector 1.625" primary to 1.75" collector 12.71 TU-ST18SS-1875 1.875 12" SS 1.75 Slip-Fit Collector 1.75" primary to 1.875" collector 15.0 TU-ST18SS-2000 2 12" SS 1.875 Slip-Fit Collector 1.875" primary to 2.00" collector 15.0 * Limited Availability 5 of 6 /8/2017
SLIP-FIT COLLECTOR: PRE-SIZED SLIP COUPLINGS Part Number Tubing OD" Length Material Fits header diameter Description Retail CN-CLSC-2125-MS 2.125 2" MS 2" Slip-Fit Collector 2.00" primary to fit 2.125" collector 2.25 CN-CLSC-2250-MS 2.25 2" MS 2 1/8" Slip-Fit Collector 2.125" primary to fit 2.25" collector 2.25 CN-CLSC-275-MS 2.75 2" MS 2 1/" Slip-Fit Collector 2.25" primary to fit 2.75" collector 2.25 CN-CLSC-2500-MS 2.5 2" MS 2 /8" Slip-Fit Collector 2.75" primary to fit 2.50" collector 2.50 CN-CLSC-2625-MS 2.625 2" MS " Slip-Fit Collector 2.50" primary to fit 2.625" collector 2.50 0 Stainless Steel Part Number Tubing OD" Length Material Fits header diameter Description Retail CN-CLSC-2125-SS 2.125 2" SS 2" Slip-Fit Collector 2.00" primary to fit 2.125" collector.50 CN-CLSC-2250-SS 2.25 2" SS 2 1/8" Slip-Fit Collector 2.125" primary to fit 2.25" collector.50 CN-CLSC-275-SS 2.75 2" SS 2 1/" Slip-Fit Collector 2.25" primary to fit 2.75" collector.50 CN-CLSC-2500-SS 2.5 2" SS 2 /8" Slip-Fit Collector 2.75" primary to fit 2.50" collector.75 CN-CLSC-2625-SS 2.625 2" SS " Slip-Fit Collector 2.50" primary to fit 2.625" collector.00 PRE-FORMED TURBO TRANSITIONS Part Number Tubing OD" Dimension Material Wall Thickness Description Retail TU-TT-200-T-MS 2 1.75" x 2.25" MS Transition from 2" tube to inside center \rectangular T flange 18.1 TU-TT-250-T-MS 2.5 1.75" x 2.25" MS Transition from 2.50" tube to outside center rectangular T flange 2.19 TU-TT-250-T-MS 2.5 2.0" x.0" MS Transition from 2.50" tube to inside center rectangular T flange 2.19 TU-TT-00-T-MS 2.0" x.0" MS Transition from.0" tube to outside center rectangular T flange 2.19 16 gauge 0 Stainless Steel Part Number Tubing OD" Dimension Material Wall Thickness Description Retail TU-TT-200-T-SS 2 1.75" x 2.25" SS Transition from 2" tube to rectangular T flange 0.2 TU-TT-250-T-SS 2.5 1.75" x 2.25" SS Transition from 2.50" tube to rectangular T flange 6.29 TU-TT-250-T-SS 2.5 2.0" x.0" SS Transition from 2.50" tube to inside center rectangular T flange 6.29 TU-TT-00-T-SS 2.0" x.0" SS Transition from.0" tube to outside center rectangular T flange 6.29 THREADED BUNGS 201 Stainless Steel (Can be used with mild steel tubing - DO NOT CHROME PLATE) Part Number Material Description Retail TU-O2-SS* SS Stainless Steel O2 sensor bung (M18 x 1.5 thread) 1.52 TU-EGT-SS* SS Stainless Steel EGT sensor bung (1/8" NPT) 1.52 * Limited Availability - Recommended subsititute MS with nickel plate CALL (71) 828-580 or (800) 795-555 FOR WHOLESALE PRICING 6 of 6 /8/2017