Australia - Chile - Indonesia - Great Britain - New Zealand - Panama - Philippines - South Korea - Thailand - USA E: sales@seaboats.net (sales) - E: admin@seaboats.net (accounts) Sale of 635m3 Trailing Suction Hopper Dredge by Public Tender Listing ID: 4100 DESCRIPTION: Sale of 635m3 Trailing Suction Hopper Dredge by Public Tender DATE LAUNCHED: 1979 LENGTH: 55.15m BEAM: 12m DRAFT: 3.20m (Empty); 4.10m (Loaded) LOCATION: New Zealand BROKER: John Kearns PRICE NOTES: Tenders close on 30th November, 2017 at 1600 NZDST General Description Sale of 635m3 Trailing Suction Hopper Dredge by Public Tender On instructions from the Owners, this vessel is now offered for sale by Public Tender. The seller retains the right to sell the vessel prior to the close of tenders. Tenders close on 30th November, 2017 at 1600 NZDST. Builder: Whangarei Engineering & Construction Co. Ltd. New Zealand Year Launched: 1979 LOA: 55.15m Beam Max: 12m Draft: 3.20m (Empty) 4.10m (Loaded) Depth: 4.60m Dead Weight: 2071 t Gross Tonnage: 1001 t Net Tonnage: 412 t Call Sign: ZM3363 MNZ No: 100258 IMO No: 7719492 Offical: No: 380209 Flag: New Zealand Home Port: Wellington Service Speed: 9.0 knots Main Engines Capacity: 2 x 470 hp Hopper Capacity: 635 m3 Maximum Dredging Depth: 12.5m VESSEL DESCRIPTION Kawatiri is a Trailing Suction Grab Hopper Dredger flat bottom displacement type mono hull with a stepped sheer aft, square flat stern and the accommodation aft. The vessel is propelled by twin diesel engines on conventional shafts and propellers and twin rudders and a bow thruster. 16 October 2017 - Listing ID: {4100} Page 1 of 19
CONSTRUCTION The vessel was built in New Zealand by Whangarei Engineering & Construction Co Ltd and was delivered on the 14 th November 1979. Construction is of welded steel plate on transverse frames and longitudinal stringers. There are four water tight bulkheads. LAYOUT The vessel has two accommodation decks with the bridge above the accommodation and the engine room below the accommodation and the pump room forward below the focsle. THE BRIDGE DECK has the conning station amidships with the dredging console to starboard with access P & S to each wing deck. The navigation and communication area is aft. Behind the bridge is the vent room and battery locker. POOP DECK has access up and out onto the side decks to port and starboard. This deck also has the galley, mess area, ablutions block and converted crew cabin with 3 bunks. MAIN DECK has access up and down via the stair well. It has the Masters and Chief Mates cabins to starboard and Chief Engineer and Second Engineers cabins to port. Amidships is the ablutions block. Aft is the workshop to port and store to starboard and access to the steering flat and down to the engineroom. Below the focsle are the Bosuns locker, paint store, lamp room, CO2 locker and access down to the Pump room. ENGINES, MACHINERY AND ENGINEERING Propulsion is provided via two turbo charged Mirrlees Blackstone main engines driving through Mirrlees Blackstone Hydraulic marine reversing gear boxes with 2.5:1 reduction coupled to conventional shafts and fixed pitch four bladed bronze propellers. The vessel is steered by twin hydraulically operated rudders. Main engines: (2) Maker: Mirrlees Blackstone Model:ES6M6R Output: 470 hp @ 750 rpm each No of Cylinders: Six (6) An electrically driven 200 hp tunnel bow thruster with a viable pitch propeller is fitted. The engine room area and its associated equipment all appears to be in good tidy condition. MAIN GENERATOR PLANTS: The vessel is fitted with 2 main generator plants and are situated outboard forward on the lower level in the engine room. The electrical control panel is also forward on the lower level in the engine room. ENGINES: 2 x Mirrlees Blackstone E4MA Marine diesels, 225 hp @ 750 rpm each GENERATORS: 2 X Brush BJS 672 type 193 kva 400V 50Hz @ 100% load ELECTRONIC AND ELECTRICAL Primary ships AC electrical power is provided by the 2 x 193 kva generators. Voltage is 225 AC. DC voltages are primarily 24volt with some 12volt services Electrical circuits are monitored and controlled in the engine room and in the wheel house Battery banks are provided for the Jet Water Pump engine, back up lighting and radio and electronic equipment. TANKAGE DIESEL OIL There are 2 tanks for diesel fuel oil, including overflow tank. Total capacity is 62.14 m3 @ 100%. FRESH WATER There is one fresh water tank. Total capacity is 17.30 m3 @ 100%. BALLAST TANK There is one ballast water tank. Total capacity is 41.96 m3 @ 100%. LUBE OIL 16 October 2017 - Listing ID: {4100} Page 2 of 19
There is 1 tank for Lube oils. Total capacity is 2.33 m3 @ 100%. There are 10 other tanks of varying capacity for sewage, sludge and Hydraulic oil. STEERING GEAR The rudder room is directly above the rudder posts. The steering gear is a two hydraulic ram system. The hydraulics are electrically operated. There are two identical electro hydraulic pumps and power units. A manual override system is also provided. This area also has a direct telegraph link to the bridge. The rudders are a semi balanced type. DREDGING EQUIPMENT The hopper capacity at the maximum overflow level is 635m3. The overside 500mm trailing suction pipe can operate down to a maximum depth of 12.5m. The pipe is fitted with a trunnion gantry, gimbal joint and drag head gantry and the drag head and is fitted with a conventional IHC 105 32.5 50 dredge pump driven by a Mirrlees Blackstone ES6M6R 470 hp engine. The Jet water pump is driven by a Cummins QSL9 285 hp engine and provides up to 120 psi at the drag head. Discharging is via the 8 bottom doors, or via the port side pump ashore connection with the IHC dredge pump. The hopper is fitted with an adjustable overflow. Mounted at the forward end of the hopper is a Hitachi Dragline Crane with a SWL of 5 tonne at 45 and fitted with a 1.2m3 Clamshell Bucket. The vessel is also fitted with a four point mooring system and when used in conjunction with the Dragline Crane is useful for dredging in confined areas. Dredging Software is HYDROPRO, which is displayed on 3 monitors and used in combination with the IHC Load and Draft Management program which was installed when the vessel was built. BRIDGE The bridge is full width with access to the wing decks each side. The bridge is equipped with the ships handling equipment in the forward area with the navigation area aft of this amidships. The dredging console is located to starboard forward with the associated dredge monitoring equipment. Much of the equipment on the bridge deck appears to be a mix of original and relatively new equipment and is reputed to be operational. Bridge equipment includes: 1x Furuno 1835 36m Marine Radar 1x Trimble Nav Trac XL GPS 1x Simrad HS70 GPS Compass 1x Simrad AP70 Auto Pilot 1x Vespermarine AIS 1x Furuno BR-510 BNWAS 1x Echotrac echo sounder 1x Uniden Oceanus VHF transceiver with DSC, DSC controller and watch receiver 1x Shakespeare SE 2510 VHF transceiver 1x Codan 6801-S Mk 2 MF/HF SSB Transceiver with antenna tuner 1x Sailor R501 2182 Watch keeping Receiver 1x Raytheon Wind Diplay 1x Kannad Marine 406 MHz EPIRB 3x LCD Dredging Monitors Phonico Intercom phone sytem Sestral Magnetic Compass with reflector tube Ships clocks and barometer Sestral Inclinometer 1x Searchlight LIFESAVING EQUIPMENT There are two inflatable life rafts carried, a RFD 4 man unit on the starboard side and a Surviva 12 man with Solas B pack on the port side, both with hydrostatic releases. All other safety equipment as per the SSM requirements is provided. 16 October 2017 - Listing ID: {4100} Page 3 of 19
DECK GEAR On the foredeck are twin, electro hydraulic windlasses. Each has a chain gypsy, captive reel drum and warping drum. The vessel has 3 x Stockless anchors, two set up in hawsers in the bow and one spare stowed aft of the forecastle. Each anchor weighs 760 kgs and has 28.5mm studded link chain with a length of 6 shackles on each cable. Appropriate fairleads, panama chocks, guide rollers and bollards are located around the deck for line handling. On the aft Poop deck are two electro hydraulic windlasses, each winch has a captive reel drum and warping drum and a gantry adjacent, which are utilised as part of the vessels four point mooring system. Appropriate fairleads, panama chocks, guide rollers and bollards are located around the deck for line handling. DOMESTIC EQUIPMENT The galley area is adequate and well laid out with a stainless steel sink top with twin basins and Formica work space. Domestic galley equipment includes: Panasonic Microwave oven A domestic type refrigerator and freezer A domestic type stove and oven. A stainless steel range hood over the cook top. A Zip instant hot water dispenser Two chest freezers The heads are all stainless steel domestic type bowls with gravity flush. Black water is collected in the blackwater tank. The showers and vanities have pressure hot and cold water. SURVEY STATUS The vessel has been built to Lloyds Register classification and was maintained in LR survey until 2013 when owners decided to let the LR class lapse due to the costs involved to maintain her in class. The Kawatiri's New Zealand Certificate Survey (certificate No. DGH212) was recently renewed in September 2017 and expires on the 26th September 2022. SUMMARY Kawatiri appears to be an efficient dedicated trailing suction grab hopper dredge that is well maintained and is predominately worked off New Zealand's West Coast. Due to the vessels relatively small size, maneuverability and capability of dredging and dumping in shallow waters, makes her a sort after versatile dredge. Tenders are to be submitted within the above time frame to SeaBoats NZ as detailed in the tender documents. The seller retains the right to sell the vessel prior to the close of tenders. The vessel is lying at Westport, New Zealand. To receive an Invitation to Tender and arrange inspection please contact: John Kearns at john.kearns@seaboatsbrokers.com or +64 21 400 805 IMPORTANT: The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct their agents, or their surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. Sale of 635m3 Trailing Suction Hopper Dredge by Public Tender Images 16 October 2017 - Listing ID: {4100} Page 4 of 19
Page 5 of 19
Page 6 of 19
Page 7 of 19
Page 8 of 19
Page 9 of 19
Page 10 of 19
Page 11 of 19
Page 12 of 19
Page 13 of 19
Page 14 of 19
Page 15 of 19
Page 16 of 19
Page 17 of 19
Page 18 of 19
Page 19 of 19