RH Series Battery Testers 10340 Palmer Rd., S.W. Pataskala, OH 43062 RHSBTP-3-12 Copyright 2012 All Rights Reserved Ph: 740-964-4000 Fx: 740-927-6017 www.redhawkenergy.net
Battery Testers Avoid Costly Downtime For a variety of reasons, batteries lose capacity over time. Determining a battery s true capacity cannot be accomplished by simply measuring the voltage of the battery or its cells, even under load conditions. The only reliable method of determining battery capacity is to measure the time the battery takes to discharge into a known load. Our innovative RH Series Portable Battery Testers take the guesswork out of determining the true health of your battery system by providing convenient and automated capacity testing of all battery technologies and voltages from 10-48V. Applications These rugged Battery Testers are suitable for use in a variety of commercial and industrial applications with batteries that are in-service as well as batteries at the shop or laboratory. ph: 740-964-4000 www.redhawkenergy.net info@redhawkenergy.net
Battery Testers Key Features & Benefits True Capacity Measurement Measures the time it takes to discharge the battery in a known load. Versatile Discharge Settings Settings to discharge at either a constant current (RH1 & RH2), constant power or constant resistance rate (RH2 only). Self-Powered Powered from the battery being tested (requires no connection to AC power grid). Easy to Operate Intuitive, easy-to-use interface that allows all parameters to be set and stored in memory. Wide Operating Range Accommodates a wide range of battery voltages and chemistries. Continuous Protection Allows a temporary battery to be connected to provide protection during testing. Automatic Operation Automatically finishes test when battery voltage has reached a preset absolute voltage or % of initial discharge voltage. Failsafe In the event of a failure, its normally-closed electro mechanical relay defaults to connect the battery to the charger. The load path is fused to protect the system in the event of a short circuit. Memory Backup & Data Logging Stores all operating parameters in memory and records the discharge current, battery voltages, charger voltages and heat-sink temperature in internal memory or removable SD card. ph: 740-964-4000 www.redhawkenergy.net info@redhawkenergy.net
RH1 Battery Tester Suitable for Many Basic Applications The RH1 Portable Battery Tester features a wide input voltage range (10-48V), constant current discharge mode with user settable termination conditions. The RH1 is packaged in a compact, rugged aluminum case with integrated carrying handle. Quick Specs Color Red Measurement Mode Constant Current Measurement Range 2-50A Termination Conditions Percentage Voltage Absolute Voltage Contactor 75A Continuous Input Voltage Range 10-48V Battery Voltage Measurement Internal Real Time Clock Audio Indicator Internal Memory 48KB Internal (>50 hours) External Memory SD Card Programmable Interface Front Panel USB Cable Gauge (Std.) 6 AWG Cable Length (Std.) 4 ft Dimensions 10.6 L x 10.6 W x 5.5 H Weight 12.8 lbs Battery & Charger Connection Cables ph: 740-964-4000 www.redhawkenergy.net info@redhawkenergy.net
RH2 Battery Tester Connection Ports Suitable for a Wider Range of Applications The RH2 Portable Battery Tester has all the features of the RH1 with several enhancements noted * in the table below. Quick Specs Color Black Measurement Modes* Constant Current Constant Power Constant Resistance Measurement Range* 2-50A; 25-500W; 0.2-25Ohm Termination Conditions* Percentage Voltage Absolute Voltage Fixed Time Contactor* 125A Continuous Input Voltage Range 10-48V Battery Voltage Measurement* Internal External (Kelvin) Real Time Clock Audio Indicator Internal Memory* 96KB Internal (>100 hours) External Memory SD Card Programmable Interface Front Panel USB Cable Gauge (Std.) 6 AWG Cable Length (Std.) 4 ft Dimensions 10.6 L x 10.6 W x 5.5 H Weight 13.6 lbs ph: 740-964-4000 www.redhawkenergy.net info@redhawkenergy.net
About Us Our History was officially formed in 2004 as a manufacturing and value-added subsidiary of the Arthur N. Ulrich Company. Since the early 1980 s, the Arthur N. Ulrich Company has designed and deployed renewable energy systems ranging from a few watts to several kilowatts for hundreds of applications throughout North America. Solar Power Systems Wind Turbines Fuel Cells Thermoelectric Generators Hybrids Battery Systems Battery Testers Battery Boxes Battery Enclosures Lightning Protection Engineering Services RHSBTP-3-12 Copyright 2012 All Rights Reserved 10340 Palmer Rd., S.W. Pataskala, OH 43062 ph: 740-964-4000 www.redhawkenergy.net