Impact Wrench Features

24

Impact Wrench Features Ease of service Simple piece construction for ease and speed of servicing. Durable steel clutch housings (zinc option on some models). Output Options lutch Options Desoutter have developed a range of 7 clutch types to meet the differing demands of our customers applications. No single clutch is perfect for every type of joint. 2 or -Jaw - Good on soft or hard joints with high ultimate torques. Rocking Dog - Good on very soft joints providing high speed rundown. Single or Double Dog - For soft and hard joints. High power/weight ratio. Twin obe - ll round clutch with a high ultimate torque and high power to weight ratio.. JOINT TYPE s a guide use the table to specify a tool for a certain joint. s a rule most joints are soft. Tool Selection. PPITION TYPE These tools are Heavy Duty and suitable for high production rates such as those on production/assembly lines, where high durability is used and the tools are used frequently. 2. OT /TORQUE The table below lists the maximum torques for bolt sizes and different grade fasteners. These torque figures are for guidance only. lways confirm values with the bolt supplier/manufacturer. DRIVE VERY SOFT SOFT HRD /8" P60 P60 P600 P600 P600 /2" P604 P604 P6500 P6500 P6540 P6540 /4" P6060 P6060 " P60 P60 P060 P060 P060 P06 P06 /2" P064 P064 P064 P620 P620 4. HNDE TYPE OT METRI METRI METRI OT SE SE STM-UN ISO 8.8 ISO 0.9 ISO 2.9 GRDE GRDE 5 GRDE & GRDE 2 8/490 Pistol D Handle OutsideTrigger D Handle Inside Trigger N.m N.m N.m ft lb ft lb ft lb 6 0.5 5 7 /4 8 8 25 6 4 5 /6 6 6 22 0 5 7 86 /8 28 8 2 87 22 46 7 /6 8 46 6 4 8 95 24 /2 28 70 94 6 2 299 59 9 /6 4 0 5 8 29 4 495 5 /8 55 40 88 20 46 585 702 /4 97 250 6 22 56 792 950 7 /8 55 405 54 24 78 0 2 20 600 82 27 060 49 789 /8 40 770 5 0 440 2025 240 /4 480 080 626 956 275 0 /8 660 470 20 6 257 540 4248 /2 860 950 280 5. SOKET RETENTION Pin Retainer for infrequent socket change Friction Ring for rapid socket change Hole for pin o-ring type retention Integral Spline with integral push button retainer Quick hange for screwdriver bits or torsion bars 25

Impact Wrench Torque Ranges Working torque range Max. torque Torque Nm (lb.ft) 0 40 60 80 00 200 00 400 500 600 700 /8" Square Drive P60HD P600RSR 0-02 (2-75) 54-20 (40-50) 76 (0) 24 (80) 7 /6" Hex. Drive P60HV P6540RSS P6500RSS 0-02 (2-75) 54-62 (40-20) 76 (0) 40-480 (0-54) 420 (0) 70 (525) /2" Square Drive P60HK P6540RS / RSR P604H / HR P6500RS / RSR 0-02 (2-75) 54-62 (40-20) 55-9 (40-250) 76 (0) 40-480 (0-54) 420 (0) 509 (75) 70 (525) Torque Nm (lb.ft) 200 400 600 800 000 250 500 2000 000 4000 5000 /4" Square Drive P6060SS / SSR 265-880 (95-650) 50 (995) " Square Drive P6060SSK P060GED / PED P60GSED / PSED P06 GSED / PSED / P RS 265-880 (95-650) 270-285 (200-950) 50-695 (75-250) 50 (995) 80 (50) 2575 (900) 220-2440 (900-800) 790 (2800) #5 Spline Drive P060 GE / PE P60 GSE / PSE P06 GSE / PSE / P RS P620 GSE / PSE 270-285 (200-950) 80 (50) 50-695 (75-250) 2575 (900) 220-2440 (900-800) 85-270 (600-2000) 790 (2800) 4740 (500) /2" Drive P620 GSED / PSED P064 GED / PED 85-270 (600-2000) 4740 (500) 620-250 (200-2400) 5420 (4000) 26

Impact Wrench 0 to 480 Nm (2 to 54 ft.lb) D E Model Side to centre P60 HD 4 5.6 25.4 P60 HK 4 5.6 25.4 P60 HV 46 5.7 25.4 P600 RSR 52 6.0.8.25 P604 H 7 6.8.8.25 P604 HR 7 6.8.8.25 P6500 RS 78 7.0 5.8.4 P6500 RSR 78 7.0 5.8.4 P6500 RSS 78 7.0 5.8.4 P6540 RS 88 7.4 5..8 P6540 RSR 88 7.4 5..8 P6540 RSS 88 7.4 5..8 OPTION ESSORIES P6500 /2" square drive with 50 (2") extension, friction ring retainer 48629 ir inlet: /4" NPT Torque ranges should be used as a guide only. Final torque will depend on the joint, operating pressure and drive accessories. PI MODE PRT DRIVE UTH HNDE OWS TORQUE TORQUE WEIGHT IR REF NUMER TYPE STYE PER WORKING MX. ONSUMPTION MINUTE N.m ft lb N.m ft lb kg lb l/s cfm P60 HD* T02887 /8" 2-Jaw Pistol 2200 0-02 2-75 76 0.5. 2.0 25 P60 HK* T02884 /2" 2-Jaw Pistol 2200 0-02 2-75 76 0.5. 2.0 25 P60 HV** T02885 7 /6" hex 2-Jaw Pistol 2200 0-02 2-75 76 0.5. 2.0 25 P600 RSR*** T025285 /8" Single-Dog Pistol 800 54-20 40-50 24 80.6.5 6.6 4 P604 H* T02888 /2" 2-Jaw Pistol 700 55-9 40-250 509 75 2.80 6.2 8.9 40 P604 HR*** T022 /2" 2-Jaw Pistol 700 55-9 40-250 509 75 2.80 6.2 8.9 40 D P6500 RS* T02524 /2" Double-Dog Pistol 20 40-480 0-54 70 525 2.65 5.8.8 25 D P6500 RSR*** T02526 /2" Double-Dog Pistol 20 40-480 0-54 70 525 2.65 5.8.8 25 D P6500 RSS** T02525 7 /6" hex Double-Dog Pistol 20 40-480 0-54 70 525 2.65 5.8.8 25 E P6540 RS* T0252 /2" Rocking-Dog Pistol 20 54-62 40-20 420 0 2.80 6.2 0.4 22 E P6540 RSR*** T025 /2" Rocking-Dog Pistol 20 54-62 40-20 420 0 2.80 6.2 0.4 22 E P6540 RSS** T0254 7/6" hex Rocking-Dog Pistol 20 54-62 40-20 420 0 2.80 6.2 0.4 22 Socket Retainer: * Pin - ** Quick hange - *** Friction Ring P6500 - reverse torque 845Nm (625ft.lb) 27

Impact Wrench 265 to 695 Nm (95 to 250 ft.lb) Model Side to centre P6060 SS 94 7.6 45.2.78 P6060 SSK 94 7.6 45.2.78 P6060 SSR 94 7.6 45.2.78 P60 GSED 0.0 44.5.75 P60 GSE 0.0 44.5.75 P60 PSED 0.0 44.5.75 P060 GED 4.5 54. 2. ESSORIES INUDED P060 P60 Support handle 0942 45892 Support handle mount 688 Support handle screws (4 off) 27944 Retainer ring (see page 42) ir Inlet: /8" NPT for & - /2" NPT for & D Torque ranges should be used as a guide only. Final torque will depend on the joint, operating pressure and drive accessories. PI MODE PRT DRIVE UTH HNDE OWS TORQUE TORQUE WEIGHT IR REF NUMER TYPE STYE PER WORKING MX. ONSUMPTION MINUTE N.m ft lb N.m ft lb kg lb l/s cfm P6060 SS* T024059 /4" 2-Jaw Pistol 000 265-880 95-650 50 995 5..7 9.8 42 P6060 SSK* T024060 " 2-Jaw Pistol 000 265-880 95-650 50 995 5.4.9 9.8 42 P6060 SSR** T024058 /4" 2-Jaw Pistol 000 265-880 95-650 50 995 5.4.9 9.8 42 P60 GSED* T024425 " Twin obe D Outside Trigger 960 50-695 75-250 2575 900 9.75 2.5 25.0 5 P60 GSE*** T024426 #5 Spline Twin obe D Outside Trigger 960 50-695 75-250 2575 900 9.75 2.5 25.0 5 P60 PSED* T02500 " Twin obe D Inside Trigger 960 50-695 75-250 2575 900 9.75 2.5 25.0 5 P60 PSE*** T0250 #5 Spline Twin obe D Inside Trigger 960 50-695 75-250 2575 900 9.75 2.5 25.0 5 P060 GED* T08046 " -Jaw D Outside Trigger 825 270-285 200-950 80 50 9.0 20.5 22.6 48 P060 GE*** T0804 #5 Spline -Jaw D Outside Trigger 825 270-285 200-950 80 50 9.0 20.5 22.6 48 P060 PED* T0825 " -Jaw D Inside Trigger 825 270-285 200-950 80 50 9.0 20.5 22.6 48 P060 PE*** T08042 #5 Spline -Jaw D Inside Trigger 825 270-285 200-950 80 50 9.0 20.5 22.6 48 Socket Retainer: * Hole - ** Friction Ring - *** Integral 28

Impact Wrench 85 to 250 (600 to 2400 ft.lb) D Model Side to centre P06 GSED 8 2.5 57.2 2.25 P06 GSE 8 2.5 57.2 2.25 P06 PSED 8 2.5 57.2 2.25 P06 PSE 8 2.5 57.2 2.25 P620 GSED 75 4.8 58.7 2. P620 GSE 75 4.8 58.7 2. P620 PSED 75 4.8 58.7 2. P620 PSE 75 4.8 58.7 2. P064 GED 47 6.4 6.0 2.4 P064 PED 47 6.4 6.0 2.4 P06P RS 272 0.7 55.0 2. P06P RS 272 0.7 55.0 2. ESSORIES INUDED P06 P064 P620 Support handle 048548 0942 048548 Support handle mount 688 906 Support handle screws (4 off) 064806 P07025 Retainer ring (see page 42) ir inlet: /2" NPT Torque ranges should be used as a guide only. Final torque will depend on the joint, operating pressure and drive accessories. PI MODE PRT DRIVE UTH HNDE OWS TORQUE TORQUE WEIGHT IR REF NUMER TYPE STYE PER WORKING MX. ONSUMPTION MINUTE N.m ft lb N.m ft lb kg lb l/s cfm P06 GSED* T022580 " 2-Jaw D OutsideTrigger 020 220-2440 900-800 790 2800 0.2 22.5 22.6 48 P06 GSE** T02258 #5 Spline 2-Jaw D OutsideTrigger 020 220-2440 900-800 790 2800 0.2 22.5 22.6 48 P06 PSED* T022578 " 2-Jaw D Inside Trigger 020 220-2440 900-800 790 2800 0.2 22.5 22.6 48 P06 PSE** T022579 #5 Spline 2-Jaw D Inside Trigger 020 220-2440 900-800 790 2800 0.2 22.5 22.6 48 P620 GSED* T0827 /2" 2-Jaw D Outside Trigger 960 85-270 600-2000 4740 500 5.4.9 28. 60 P620 GSE** T07755 #5 Spline 2-Jaw D Outside Trigger 960 85-270 600-2000 4740 500 5.4.9 28. 60 P620 PSED* T0884 /2" 2-Jaw D Inside Trigger 960 85-270 600-2000 4740 500 5.4.9 28. 60 P620 PSE** T0825 #5 Spline 2-Jaw D Inside Trigger 960 85-270 600-2000 4740 500 5.4.9 28. 60 P064 GED* T02002 /2" 2-Jaw D Outside Trigger 500 620-250 200-2400 5420 4000 4..5 27.4 58 P064 PED* T020022 /2" 2-Jaw D Inside Trigger 500 620-250 200-2400 5420 4000 4..5 27.4 58 D P06P RS* T0254 " 2-Jaw Pistol 020 220-2440 900-800 790 2800 0.5 2. 22.6 48 D P06P RS** T02544 #5 Spline 2-Jaw Pistol 020 220-2440 900-800 790 2800 0.5 2. 22.6 48 Socket Retainer: * Hole - ** Integral 29

Fastening accessories Symbols Fastener Head Type Drives The following symbols are used in this catalogue: ID Ø H Hexagon cross Flat Size Internal Diameter Diameter Hard Extra Hard Magnetic Male Square Drive Size Female Square Drive Size ength Q/R Quick Release Thread Size Pozidriv/Supadriv Phillips Torx Torx Tamper Proof Torx Plus Internal Hex External Hex Slot /4" Hex* Insert (6.) (ISO7/ DIN26) /4" Hex Power Drive (E6.) (ISO7/ DIN26) 5/6" Hex Power Drive Hex Power Drive () (ISO7) Thread Drive Square Drive * Note: to be used with a bit holder Torx, Torx Plus are registered trademarks of amcar Div., Textron Inc. R, Pozidriv, Torq-Set, Tri-Wing are registered trademarks of Phillips Screw o. 0

Screwdriver its Pozidriv/Supadriv /4" HEX INSERT (6.) POINT PRT NO. PRT NO. H 0 25 08082 25 658046790 0752 2 25 658046800 0762 25 65804680 0772 50 2 658046820 2 50 2 65804680 4 0 /6 082 THRED DRIVE POINT Ø THRED PRT NO. 5 /6 6 M4 65422 2 5 /6 6 M4 65442 2 5 /6 7 M5 65452 2 5 /6 8 M6 0572 5 /6 8 M6 05742 HEX POWER () POINT PRT NO. 0 50 2 80782 50 2 80792 /4" HEX POWER (E6.) POINT PRT NO. PRT NO. H 4 HEX INSERT (4) POINT PRT NO. 0 28 /8 80872 28 /8 80882 50 2 658046840 62 2 50 2 658046850 72 50 2 658046860 82 70 2 /4 658046870 92 2 70 2 /4 658046880 202 70 2 /4 658046890 222 89 /2 658046900 22 2 89 /2 65804690 242 89 /2 658046920 252 50 6 0292 2 50 6 002 Torx POINT PRT NO. H /4" HEX INSERT (6.) T6 25 65804690 T7 25 658046940 T8 25 658046950 T9 25 658046960 T0 25 272 T5 25 282 T20 25 292 T25 25 02 T27 25 22 T0 25 2 T40 25 42 THRED DRIVE POINT Ø THRED PRT NO. T8 5 /6 6 M4 05772 T0 5 /6 6 M4 05782 T20 5 /6 6 M4 05802 T0 5 /6 7 M5 0582 T5 5 /6 7 M5 05842 T20 5 /6 7 M5 05852 T25 5 /6 7 M5 05862 T0 5 /6 7 M5 05882 /4" HEX POWER (E6.) POINT PRT NO. H POINT PRT NO. T8 50 2 658046970 T9 50 2 658046980 T0 50 2 52 T5 50 2 72 T20 50 2 82 T25 50 2 92 T27 50 2 402 T0 50 2 422 T40 50 2 42 T40 70 2 /4 0042 T20 89 /2 0892 Torx Plus /4" HEX POWER (E6.) IP0 89 /2 082 IP5 89 /2 0842 HEX POWER () POINT PRT NO. T6 50 2 89962 T8 50 2 89972 T0 50 2 89982 4 HEX INSERT (4) POINT PRT NO. T6 28 /8 99772 Torx Tamper Proof /4" HEX INSERT (6.) POINT PRT NO. TP0 25 658045460 TP20 25 658045470 TP0 25 658045480

Screwdriver its Phillips /4" HEX POWER (E6.) POINT PRT NO. PRT NO. PRT NO. H R 0 50 2 022 50 2 65804720 522 082 2 50 2 6580470 52 092 50 2 65804740 542 02 70 2 /4 0242 2 70 2 /4 0252 70 2 /4 0262 89 /2 65804750 552 22 2 89 /2 65804760 562 2 89 /2 65804770 2 50 6 52 R = nti-am-out Ribs /4" HEX INSERT (6.) POINT PRT NO. PRT NO. H 0 25 0682 25 658047060 0692 2 25 658047070 0702 25 658047080 0722 4 2 /4 072 50 2 658047090 2 50 2 65804700 0742 50 2 6580470 2 70 2 /4 072 THRED DRIVE POINT Ø THRED PRT NO. 5 /6 6 M4 95902 5 /6 7 M5 95942 2 5 /6 7 M5 6582 REDUED NOSE DIMETER /4" HEX INSERT (6.) POINT PRT NO. PRT NO. H 25 65804780 658047200 2 25 65804790 65804720 HEX POWER () POINT PRT NO. 00 50 2 8202 0 50 2 80762 50 2 80772 4 HEX INSERT (4) POINT PRT NO. 0 28 /8 80852 28 /8 80862 For 5 /6" Hex Power ccessories see pages 7/8 Internal Hex /4" HEX INSERT (6.) HEX PRT NO. 2.0 25 0782 /2" 25 658046990 2.5 25 0792.0 25 0802 /8" 25 658047000 9 /64" 25 65804700 4.0 25 0822 /6" 25 658047020 5.0 25 082 7 /2" 25 65804700 6.0 25 0842 /4" 25 658047040 7.0 25 658047050 8.0 25 0852 /4" HEX POWER (E6.) HEX PRT NO. 2.0 50 2 0202 2.5 50 2 0862.0 50 2 0872 4.0 50 2 0882 5.0 50 2 0892 6.0 50 2 0902 8.0 50 2 0922 0.0 50 2 092 THRED DRIVE 4 HEX INSERT (4) HEX PRT NO. HEX Ø THRED PRT NO..5 28 /8 892 2.0 28 /8 8202 2.5 28 /8 8222.0 28 /8 822.0 5 /6 7 M5 05922 4.0 5 /6 7 M5 0592 5.0 5 /6 8 M6 05942 2

Screwdriver its Slot /4" HEX INSERT (6.) /4" HEX POWER (E6.) PRT NO. PRT NO. H.5 0.4 0.7 0.026 25 658047220 658047240 4.0 0.5 0.8 0.00 25 658047250 4.7 0.7 0.9 0.04 25 0662 5.0 0.20 0.8 0.0 25 65804720 6. 0.25.0 0.042 25 65 8047260 THRED DRIVE Ø THRED PRT NO. 4.8 0.9 0.6 5.5 M4 05962 6.0 0.24 0.7 6.0 M4 05982 7.0 0.28 0.9 7.0 M5 06002 7.0 0.28.0 7.0 M5 06022 8.0 0.2.0 8.0 M6 0602 PRT NO. PRT NO. H.2 0.2 0.7 0.026 50 2 658047270 0642.9 0.5 0.8 0.02 50 2 658047280 0942 4.7 0.9 0.9 0.04 50 2 658047290 0952 5.4 0.22 0.8 0.02 50 2 65804700 6. 0.25.0 0.08 50 2 0962 6.5 0.26.2 0.047 50 2 7.2 0.28. 0.042 50 2 6580470 0972 7.9 0..2 0.046 50 2 65804720 002 8.0 0..6 0.06 50 2 9. 0.6. 0.050 50 2 022.2 0.2 0.7 0.026 76 0652.9 0.5 0.8 0.02 76 02 6. 0.25.0 0.08 76 052 8.0 0..2 0.046 76 0082 9. 0.6. 0.050 76 0092.2 0.2 0.7 0.026 0 4 65804740.9 0.5 0.8 0.02 0 4 65804750 4.7 0.9 0.9 0.04 0 4 65804760 6. 0.25.0 0.08 0 4 65804770 7.2 0.28. 0.042 0 4 65804780 7.9 0..2 0.046 0 4 65804790 9. 0.6. 0.050 0 4 658047400 HEX POWER () PRT NO. 2.0 0.08 0. 0.02 50 2 88962 2.5 0.0 0.4 0.06 50 2 80722.0 0.2 0.5 0.020 50 2 8072 4.0 0.6 0.6 0.024 50 2 80742 5.0 0.20 0.8 0.0 50 2 80752 4 HEX INSERT (4) PRT NO..0 0.2 0.5 0.020 28 /8 80802 4.5 0.8 0.6 0.024 28 /8 8082 5.5 0.22 0.8 0.0 28 /8 80842 OMINED IT ND FINDER SEEVES /4" HEX POWER (E6.) PRT NO. 4.9 0.20 0.9 0.04 95 /6 8.0 0.2 062 6. 0.24.07 0.04 95 /6 9.4 0.8 072 7. 0.29.07 0.04 95 /6 0.8 0.4 65804740 8.9 0.6.7 0.05 95 /6. 0.45 658047420 0.0 0.40.27 0.05 98 59 /64 2.6 0.50 65804740.9 0.6 0.6 0.02 5 2 /8 4.0 0.7 0802.9 0.6 0.7 0.0 5 2 /8 4.0 0.7 08042 7.0 0.28.2 0.05 95 /6 9. 0.7 0222 9.0 0.6.6 0.06 95 /6 2.0 0.48 022 0.0 0.40.6 0.06 95 /6 5.0 0.60 02

onsumables Screwdriver its, Vaccum Systems & Finder Sleeves F Spring D H Thread Protection ap (delivered with screwdriver) S4 and 289 Screwdrivers only FINDER SEEVES & ITS FOR HEX POWER () SREWDRIVERS ITS To use Hex Power its () with Non Rotating Finder Sleeves spring Part No. 28044 will be required. PI Ø Ø Ø D PRT NO. PRT PRT POINT PRT NO. POINT REF F NO. H NO. H H ø &.0 0.2.0 0.2 2.4 0.09.80 0.5 4 /8 8042 80722 80782 0 8202/80762 000/00/0 &.8 0.5.85 0.5. 0.25 4.75 0.9 4 /8 8052 8072 80782 0 80762 0 & 4. 0.7 4.60 0.8 4. 0.6 5.45 0.2 4 /8 8062 80742 80792 80772 & 4.7 0.9 4.85 0.9 4. 0.6 5.70 0.22 4 /8 8072 80742 80792 80772 & 5.6 0.22 5.65 0.22 5. 0.20 6.60 0.26 4 /8 8082 80752 80792 80772 Finder Sleeve lank 6.60 0.26 00 4 88992 an be used with suction screw pick-up Finder sleeve (not supplied) Spring Spring guide Tube it (not supplied) Vacuum collar D VUUM REW PIK-UP KIT FOR S, S2, SD & ES SREWDRIVERS DESRIPTION ø PRT NO. Kit (S) including: 08892 Spring Guide 4642 Spring 46422 Vacuum collar 4642 Vacuum tube (2.m long) 22 lank finder sleeve machining instructions 4648 Kit (S) 5 /6" Hex 74762 NON-ROTTING FINDER SEEVE KIT FOR S, S2, SD & ES SREWDRIVERS DESRIPTION PRT NO. ø Kit including: 08902 Spring 46422 lank finder sleeve machining instructions 4648 Note: Finder sleeves to suit screw/screwdriver bit must be machined from plastic or steel blanks (see below) DESRIPTION Ø Ø D PRT NO. Finder Sleeve lank Delrin (S).0 0.2 4.2 0.6 05 4. 4640 Finder Sleeve lank Steel (S).0 0.2 4.2 0.6 05 4. 46409 Finder Sleeve lank Steel (S).5 0. 5.6 0.6 26.0 46475 IR-POWERED VUUM TTHMENTS FOR NERS DU able alancers can be simply converted into a vacuum source by fitting a Vacuum ttachment. Vacuum is adjustable and switches off automatically when screwdriver is released. NER TYPE VUUM WTER GUGE ( w.g. = 8. mbar) HOSE HOSE ENGTH ORE l/s cfm d() part no. m ft. DU 4570 0.47 64 5482.6 5 /2 4 0.6 IR-POWERED V20 VUUM UNIT The V20 is installed into the air line system by screwing into the gauge port of a combination filter/regulator or into a tee piece between a regulator and lubricator. VUUM MERURY GUGE IR INET HOSE HOSE ENGTH ORE l/s cfm d() part no. m ft. 4570 0.7.5 54 206 /8 2. 7 /2 4 0.6 4

onsumables Impulse/Impact its Designed for use with impact and impulse tools to absorb shock loading /4" HEX POWER (E6.) POINT OR PRT NO. HEX 2 49 2 909202 49 2 9092024 /4" HEX POWER (E6.) POINT OR PRT NO. HEX 4 49 2 90920229 5 49 2 9092022 /4" HEX POWER (E6.) POINT OR PRT NO. HEX 2 49 2 90920205 49 2 90920208 /4" HEX POWER (E6.) POINT OR PRT NO. HEX T25 49 2 90920220 T0 49 2 9092022 it Holders /4" HEX INSERT (6.) /4" HEX POWER (E6.) Q/R PRT NO. Q/R PRT NO. 4.7 /4" Hex Insert (D6.) 2222 HEX POWER () Q/R PRT NO. 57 2.25 4 Hex Insert (D4) 80892 57 2.25 4 Hex Insert (D4) 80902 50 2.0 /4" Hex Insert (D6.) 8222 For 5 /6" Hex. Power ccessories see page 50 2.0 /4" Hex Power (E6.) 75782 ) 50 2.0 5 /6" Hex Power 0622 45.8 4 Hex Insert (D4) 9762 50 2.0 /4" Hex Insert (D6.) 07952 7 2.9 /4" Hex Insert (D6.) 99752 ) 75.0 /4" Hex Insert (D6.) 262 ) 74 2.9 /4" Hex Insert (D6.) 0252 2) 42.6 /4" Hex Insert (D6.) 0282 74 2.9 /4" Hex Insert (D6.) 0062 80. /4" Hex Insert (D6.) 062 ) 00.9 /4" Hex Insert (D6.) 042 50 5.9 /4" Hex Insert (D6.) 002 50 5.9 /4" Hex Insert (D6.) 052 ) Reduced external diameter 9.5 ( /8"), no retention clip 2) opper beryllium ) With retaining screw 5

onsumables daptors SQURE DRIVE DPTORS /4" HEX INSERT (6.) PRT NO. /4" Square Drive 9.5 472 THRED DPTOR /4" HEX POWER (E6.) PRT NO. /8" x 24 UNF 45.7 9674 /4" HEX POWER (E6.) PRT NO. /4" Square Drive 5.4 9552 /4" Square Drive 50 2.0 972 /8" Square Drive 4.6 9562 TEESOPI SPINDE EXTENSION DPTORS STROKE PRT NO. 5 /6" Hex Power /8" Square Drive 67 2.6 9.5 0.8 759 /4" Hex Power E6. /4" Hex Power E6. 84 4.2 9.5 0.8 967 /8" Square Drive /4" Hex Power E6. 7.8 9.5 0.8 9672 HEX POWER () PRT NO. /4" Square Drive 50 2.0 8272 Nutrunners /4" HEX INSERT (6.) PRT NO. ISO UNF/ M4 7.0 0.27 0.4 2.4 0.09 28. 9092096 M5 8.0 0. 0.5 2.9 0. 28. 9092099 M6 0.0 0.9 4 0.56 5.0 0.20 2.25 90920202 /4" HEX POWER (E6.) PRT NO. ISO UNF/ M 5.5 0.2 0.4.9 0.5 65 2.5 9092045 M.5 6.0 0.2 0.4.9 0.5 65 2.5 909205 4 /4 0.4 4.4 0.7 65 2.5 9092075 M4 7.0 0.27 2 0.47 4.8 0.9 65 2.5 9092057 M5 8.0 0. 0.5 5.6 0.22 65 2.5 909206 M6 0.0 0.9 4 0.56 6.7 0.26 65 2.5 9092069 5/6 0.5 5.6 0.22 65 2.5 909208 /4" HEX POWER (E6.) PRT NO. ISO UNF/ M 5.5 0.22 0.4 2. 0.09 65 2.5 9092048 M.5 6.0 0.24 0.4 2.4 0.09 65 2.5 9092054 4 /4 0.4 2.4 0.09 65 2.5 9092078 M4 7.0 0.27 2 0.47 2.8 0. 65 2.5 9092060 M5 8.0 0. 0.5 2.9 0. 65 2.5 9092066 M6 0.0 0.9 4 0.56 5.0 0.9 65 2.5 9092072 2 /4". 0.44 6 0.6 5.0 0.9 65 2.5 909209 6

onsumables 5/6" Hex Power its SREWDRIVER ITS 5/6" HEX POWER POINT PRT NO. 2. 642 2 2. 652 52 2.0 672 2 52 2.0 682 52 2.0 692 92.6 702 2 92.6 722 92.6 72 SREWDRIVER ITS 5/6" HEX POWER POINT PRT NO. 2. 52 2 2. 542 44.7 62 52 2.0 562 2 52 2.0 572 52 2.0 582 92.6 602 2 92.6 622 92.6 62 SREWDRIVER IT NK 5/6" HEX POWER PRT NO. 0.2 0.40 52 2 0522 0.2 0.40 54 6 0692 SREWDRIVER ITS 5/6" HEX POWER HEX PRT NO. 0.2 50 2.0 99842 4 0.6 50 2.0 99852 5 0.9 50 2.0 99862 6 0.2 50 2.0 99872 8 0. 50 2.0 99882 SREWDRIVER ITS 5/6" HEX POWER PRT NO.. 0.2 0.6 0.02 52 2.04 0082.7 0.4 0.8 0.0 52 2.04 0092 5.0 0.9.0 0.08 52 2.04 002 6.2 0.24.0 0.08 52 2.04 022 7.5 0.29.2 0.047 52 2.04 02 8.8 0.4. 0.05 52 2.04 042 0.2 0.40.5 0.059 52 2.04 052. 0.2 0.6 0.02 78.07 062.7 0.4 0.8 0.02 78.07 072 5.0 0.9.0 0.08 78.07 082 6.2 0.24.0 0.08 78.07 092 7.5 0.29.2 0.047 78.07 0202 8.8 0.4. 0.05 78.07 0222 0.2 0.40.5 0.059 78.07 022. 0.2 0.6 0.02 0 4.05 0242.7 0.4 0.8 0.02 0 4.05 0252 5.0 0.9.0 0.08 0 4.05 0262 6.2 0.24.0 0.08 0 4.05 0272 7.5 0.29.2 0.047 0 4.05 0282 0.2 0.40.5 0.059 0 4.05 002 5.0 0.9.0 0.08 54 6.06 0422 SREWDRIVER ITS OMINED IT ND FINDER SEEVES 5/6" HEX POWER PRT NO..2 0.2 0.6 0.02 84. 4.2 0.6 0822.9 0.5 0.8 0.0 84. 5.7 0.22 082 5. 0.20.0 0.08 84. 7.2 0.28 0842 6.4 0.25. 0.04 84. 8.6 0.4 0852 7.7 0.0.2 0.047 84. 0. 0.9 0862 8.8 0.4.4 0.055 84..6 0.45 0872.0 0.42.6 0.062 84..0 0.5 0882.9 0.5 0.8 0.0 0 4. 5.7 0.22 0902 5. 0.20.0 0.08 0 4. 7.2 0.28 0922 6.4 0.25. 0.04 0 4. 8.6 0.4 092 7.7 0.0.2 0.047 0 4. 0. 0.9 0942 7

onsumables 5/6" Hex Power ccessories IT HODERS 5/6" HEX POWER Q/R PRT NO. EXTENTION DPTORS 5/6" HEX POWER PRT NO. SQURE DRIVE DPTORS 5/6" HEX POWER PRT NO. 45.77 /4" Hex Power (F6.) 78882 46.8 /4" Hex Insert (D6.) 522 62 2.44 /4" Hex Insert (D6.) 502 Replacement Spring Ring for 522, 502 2606 70 2.75 /4" Hex Insert (D6.) 0072 55 2.6 /4" Hex Insert (D6.) 98682 ap and O Ring for 98682 002 5/6" Hex Power 5 2.0 0762 5/6" Hex Power 76 2.9 0772 5/6" Hex Power 0.9 0782 5/6" Hex Power 26 4.9 0792 5/6" Hex Power 5 5.9 0802 /4" Square Drive 4. 2962 /4" Square Drive 75 2.9 2592 /4" Square Drive 00.9 2602 /8" Square Drive 7.4 9772 NUTRUNNERS 5/6" HEX POWER PRT NO. 89 7.5 ISO UNF/ M2.5 5. 0.20 8.9 0.5 2. 0.09 742 M 5.5 0.2 9.5 0.7 2.4 0.09 62 M.5 6. 0.24 0.4 0.4.2 0.2 772 4 6.5 0.25.4 0.44. 0. 792 M4 7.2 0.28.9 0.46. 0. 642 M5 5-6 8. 0..7 0.54 4. 0.6 742 8. 0.2.7 0.54 4. 0.6 7422 M6 0. 0.9 6.0 0.6 4.8 0.8 7462 2 /4".4 0.44 7.5 0.68 5.6 0.22 7482 5 /6".0 0.5 9.6 0.77 6.4 0.25 752 M8.2 0.52 9.8 0.78 6.4 0.25 752 /8" 4.5 0.57 2. 0.8 7.9 0. 7552 M0 7. 0.68 24.6 0.96 9.7 0.8 7582 ottle ap Drivers/Nose ttachment Kits D NOSE TTHMENT KITS FOR THE SSEMY OF THREDED PTIVE FSTENERS, RIVET NUTS, ET USE WITH TOOS S, S2, SD & ES THRED PRT NO. THRED PRT NO. SSEMY KIT SSEMY KIT M x 0.5 76552 6 x 2 UN 77602 M4 x 0.7 76562 8 x 2 UN S5009-04 M5 x 0.8 76572 0 x 24 UN S5009-0 M6 x.0 76582 0 x 2 UNF S5009-06 M8 x.25 76592 /4" -20 UN S5009-0 /4"-28 UNF S5009-02 5 /6" UN 76672 5 /6" UNF 76682 OTTE P DRIVERS 5/6" HEX POWER Ø Ø D PRT NO. 25.4.0 4. 0.56 6.4 0.25 8..50 82 28.6.2 7.5 0.68 6.4 0.25 8..50 842.7.24 22.2 0.87 6.4 0.25 8..50 852 4.9.7 2.8 0.9 6.4 0.25 8..50 862 9.7.56 27.0.06 6.4 0.25 8.9.5 872 42.9.68 0.2.8 6.4 0.25 8.9.5 882 49.2.9 6.5.4 7.9 0. 40.4.59 892 55.6 2.8 42.9.68 7.9 0. 40.4.59 902 D E F G THRED PRT NO. PRT NO. PRT NO. ENGTH PRT NO. E PRT NO. PRT NO. PRT NO. D /F F G /4 (6.) M x 0.5 275 2760 2742 5.7 27968 2.5 0.09 7262 276 6 M4 x 0.7 275 2760 2744 5.7 2764.0 0.2 7272 M5 x 0.8 2756 2760 2747 5.7 2765 4.0 0.5 7292 M6 x.0 2757 2760 2748 5.7 2789 5.0 0.9 72222 M8 x.25 2759 008 45.77 009 6.0 0.2 72242 8

Sockets Square Drive daptors HEXGON ITS 7/6" ON FTS HEX ENGTH PRT NO. 8 28.0 2 0.47 65804080 0 28.0 2 0.47 65804090 2 28.0 2 0.47 6580400 ø POSITIVE RETENTION Ø PRT NO. /8 /8 /4" Hex 4 0.55 4 0.55 8.49 65822060 7 /6" Hex 4 0.55 4 0.55 8.49 65804570 SQURE DRIVE TO SREWDRIVER IT DPTORS QUIK REESE ND IP/ RETENTION Ø MX Q/R PRT NO. /8 /8 /8 /2 /4 /4" Hex Insert (D6.) 2.26 6 0.62 2792 /4" Hex Power (F6.) 46.8 22 0.86 Q/R 08052 5 /6" Hex Power 68 2.67 2 0.82 Q/R 2762 /4" Hex Insert (D6.) 45.77 22 0.86 6582060 5 /6" Hex Power 25.0 26892 Sockets /2" Drive with Male Hex/Stud Runners STUD RUNNER THRED SQURE Ø D PRT NO. DRIVE M5 x 80 /8 5 0.59 9 0.74 55 2.6 6580450 M6 x 00 /8 5 0.59 9 0.74 55 2.6 6580460 M8 x 25 /8 7 0.66 9 0.74 55 2.6 65804620 M0 x 50 /8 9 0.74 24 0.94 55 2.6 65804540 M6 x 00 /2 22 0.86 24 0.94 65 2.55 65804550 M8 x 25 /2 24 0.94 24 0.94 65 2.55 6580460 M0 x 50 /2 24 0.94 24 0.94 65 2.55 65804640 M2 x 75 /2 24 0.94 24 0.94 65 2.55 65804650 M4 x 200 /2 24 0.94 24 0.94 65 2.55 65804680 M6 x 200 /2 24 0.94 24 0.94 65 2.55 65804580 HEXGON DRIVES WITH PIN ND O-RING RETENTION SQURE ØD PRT NO. DRIVE 4 0.5 /8 50.96 6 0.6 9 0.74 9092078 5 0.9 /8 50.96 6 0.6 9 0.74 909208 6 0.2 /8 50.96 6 0.6 9 0.74 9092084 8 0. /8 50.96 6 0.6 9 0.74 9092087 0 0.9 /8 50.96 6 0.6 9 0.74 9092090 8 0. /2 75 2.95 6 0.6 25 0.98 9092096 0 0.9 /2 75 2.95 6 0.6 25 0.98 9092099 4 0.55 /2 75 2.95 20 0.78 25 0.98 90920405 SOKET /2" DRIVE WITH ME HEX HEX PRT NO. 4 0.5 44.7 6 0.2 658040400 5 0.9 44.7 8 0. 65804040 6 0.2 44.7 9 0.5 658040420 8 0. 44.7 2 0.47 65804040 0 0.9 47.85 6 0.6 658040440 4 0.55 50.96 2 0.82 658040450 7 0.67 50.96 26.02 658040460 9 0.74 50.96 26.02 658040470 5 /6 44.7 2 0.47 658040490 /8 47.85 6 0.6 658040500 /2 50.96 9 0.74 658040520 9

Sockets Driver/Extractor daptor STUD DRIVER/EXTRTORS 5/6" HEX POWER PRT NO. PRT NO. DPTOR DRIVER/EXTRTOR M4 8.2 0.7 5262 M5 9.8 0.78 502 M6 2.7 0.50 5502 52 4. 0.56 5502 542 M7 9.0 0.74 5502 562 M8 9.0 0.74 5502 572 Extensions Universal Joints daptors EXTENSIONS FEME SQ. Ø PRT NO. SQ. DRIVE /4 /4 5 2.0 0.5 65807050 /4 /4 75 2.9 0.5 65807070 /4 /4 00.9 0.5 6580700 /4 /4 50 5.9 0.5 6580750 /8 /8 76.0 9 0.74 658072070 /8 /8 52 5.9 9 0.74 65807250 /2 /2 5 2.0 0.8 65807050 /2 /2 27 5.0 0.8 658070 /2 /2 254 0.0 0.8 65807250 /4 /4 02 4.0 44.7 65807500 /4 /4 78 7.0 44.7 65807570 78 7.0 54 2.2 65807680 #5 #5 20 7.9 54 2.2 65804040 DPTORS FEME SQ. Ø PRT NO. SQ. DRIVE /4 /8 2. 2.5 0.49 65809200 /8 /4.2 22 0.86 65809200 /8 /2 5.4 22 0.86 65809200 /2 /8 5.4 25 0.98 65809200 /2 /4 4.7 0.8 65809500 /4 /2 52 2.0 44.7 65809500 /4 60 2.4 44.7 658095600 /4 67 2.6 54 2.2 658096500 #5 90.5 60 2.6 6580400 UNIVERS JOINTS FEME SQ. Ø PRT NO. SQ. DRIVE /4 /4 42.6 7 0.66 6580800 /8 /8 60 2. 20 0.78 65808200 /2 /2 76.0 2.26 6580800 /4 /4 89.5 44.7 65808500 2 4.4 54 2.2 65808600 #4 #4 2 5.2 86.8 65804020 #5 #5 4 5.6 86.8 6580400 Sockets /4" - /8" Square Drive MGNETI /4" SQURE DRIVE IMPT SOKETS ON FTS Ø DEPTH t PRT NO. 7 25 9 0.75 0.2 658040050 8 25 9 0.75 4 0.6 658040060 0 25 9 0.75 5 0.20 658040070 EXTENDED /8" SQURE DRIVE IMPT SOKETS ON FTS Ø DEPTH t PRT NO. 8 57 2.24 2.5 0.49 8 0. 658062080 0 57 2.24 5.5 0.6 0 0.9 65806200 57 2.24 7.0 0.67 0.4 6580620 2 57 2.24 8.0 0.7 2 0.47 65806220 57 2.24 9.5 0.77 0.5 6580620 5 57 2.24 22.0 0.87 5 0.59 65806250 6 57 2.24 2.0 0.9 6 0.6 65806260 7 57 2.24 24.5 0.96 7 0.67 65806270 8 57 2.24 25.5.00 8 0.7 65806280 9 57 2.24 27.0.06 9 0.75 65806290 STNDRD /4" SQURE DRIVE IMPT SOKETS ON FTS Ø DEPTH t PRT NO. 4.0 25 7.5 0.0 4 0.6 65805040 4.5 25 8.0 0. 4 0.6 65805450 5.0 25 8.5 0. 4 0.6 65805050 5.5 25 9.0 0.5 4 0.6 65805550 6.0 25 9.5 0.7 5 0.20 65805060 7.0 25.0 0.4 5 0.20 65805070 8.0 25 2.0 0.47 6 0.24 65805080 9.0 25.0 0.5 7 0.28 65805090 0.0 25 4.5 0.57 7 0.28 6580500.0 25 6.0 0.6 8 0. 658050 2.0 25 7.0 0.67 8 0. 6580520.0 25 8.0 0.7 9 0.5 658050 4.0 25 9.0 0.75 9 0.5 6580540 STNDRD /8" SQURE DRIVE IMPT SOKETS ON FTS Ø DEPTH t PRT NO. 6 4.4 0.0 0.9 5.0 0.20 658052060 7 4.4.0 0.4 6.5 0.26 658052070 0 4.4 5.0 0.59 8.0 0. 65805200 4.4 6.5 0.65 9.0 0.5 6580520 2 4.4 8.0 0.7 9.0 0.5 65805220 4.4 9.5 0.77 0.0 0.9 6580520 4 4.4 20.5 0.8 0.0 0.9 65805240 5 4.4 22.0 0.87 0.0 0.9 65805250 6 4.4 2.0 0.9 0.0 0.9 65805260 7 4.4 24.5 0.96 0.0 0.9 65805270 8 4.4 25.5.00 0.0 0.9 65805280 9 4.4 27.0.06.0 0.4 65805290 /8" 0.8 4.5 0.57 4.0 0.6 658042660 /2" 0.8 9.0 0.75 6.0 0.24 658042680 9/6" 0.8 20.0 0.79 7.0 0.28 658042690 /4" 0.8 24.0 0.94 0.0 0.9 402609900 40

Sockets Sockets /2" - /4" Square Drive STNDRD /2" SQURE DRIVE IMPT SOKETS ON FTS Ø DEPTH t PRT NO. 0 8.50 6.0 0.6 8.0 0. 6580500 8.50 7.5 0.69 9.0 0.5 658050 2 8.50 9.0 0.75 9.0 0.5 6580520 8.50 20.5 0.8 0.0 0.9 658050 4 8.50 22.0 0.87 0.0 0.9 6580540 5 8.50 2.5 0.9 0.0 0.9 6580550 6 8.50 24.5 0.96 0.0 0.9 6580560 7 8.50 26.0.02 0.0 0.9 6580570 8 8.50 27.5.08 0.0 0.9 6580580 9 8.50 29.0.4.0 0.4 6580590 20 8.50 0.0.8 2.0 0.47 65805200 2 8.50.0.22.0 0.5 6580520 22 8.50 2.5.28.0 0.5 65805220 2 8.50 4.0.4 5.0 0.59 6580520 24 45.77 5.0.8 5.0 0.59 65805240 26 45.77 8.0.50 5.0 0.59 65805260 27 50.97 9.0.54 6.0 0.6 65805270 29 50.97 4.0.6 7.0 0.67 65805290 0 50.97 42.5.67 8.0 0.7 6580500 /8" 8.50 6.0 0.6 4.0 0.6 658042780 9 /6" 8.50 22.0 0.87 7.0 0.28 65804280 /4" 8.50 28.7. 9.5 0.7 6580590 /6" 8.50 0.0.8.0 0.4 658042840 5 /6" 8.50 4.0.4.0 0.5 658042860 /6" 8.50 8.7.52.0 0.5 65805270 /6" 40.57 42.0.65 6.5 0.65 6580500 EXTENDED /2" SQURE DRIVE IMPT SOKETS ON FTS Ø DEPTH t PRT NO. 0 78.07 7.0 0.67 0.0 0.9 6580600 78.07 8.5 0.7.0 0.4 658060 78.07 2.5 0.85.0 0.5 658060 4 78.07 2.0 0.9 4.0 0.55 6580640 5 78.07 2.5 0.9 5.0 0.59 6580650 6 78.07 24.5 0.96 6.0 0.6 6580660 7 78.07 26.0.02 7.0 0.67 6580670 8 78.07 27.5.08 8.0 0.7 6580680 9 78.07 29.0.4 9.0 0.75 6580690 20 78.07 0.0.8 20.0 0.79 65806200 22 78.07 2.5.28 2.0 0.9 65806220 24 78.07 5.0.8 25.0 0.98 65806240 27 78.07 9.0.54 26.0.02 65806270 0 78.07 4.0.69 0.0.8 6580600 /4" 78.07 28.7. 9.5 0.7 6580690 /6" 78.07 8.7.52.0 0.5 65806270 STNDRD /4" SQURE DRIVE IMPT SOKETS ON FTS Ø DEPTH t PRT NO. ON FTS Ø DEPTH t PRT NO. 9 50.97 2.26 0.5 65805590 2 50.97 5.8 0.5 65805520 22 50.97 5.8 0.5 658055220 24 50.97 9.54 5 0.59 658055240 27 54 2. 42.65 6 0.6 658055270 0 54 2. 46.8 8 0.7 65805500 2 56 2.20 49.9 8 0.7 65805520 6 56 2.20 54 2. 20 0.79 65805560 4 58 2.28 6 2.40 22 0.87 65805540 /4" 45.77 6.42 9.5 0.7 65805590 /6" 48.89 46.8.0 0.5 658055270 EXTENDED /4" SQURE DRIVE IMPT SOKETS 24 00.94 40.57 24 0.94 658065240 2 00.94 49.9 2.26 65806520 6 00.94 54 2. 2.26 65806560 4

Sockets Sockets " Square Drive STNDRD " SQURE DRIVE IMPT SOKETS ON FTS Ø DEPTH t PRT NO. ON FTS Ø DEPTH t PRT NO. 24 59 2.2 8.50 5.0 0.59 658056240 27 59 2.2 44.7 6.0 0.6 658056270 0 6 2.40 50.97 8.0 0.7 65805600 2 6 2.40 52 2.05 9.0 0.75 65805620 6 2.40 54 2. 9.0 0.75 6580560 6 65 2.56 57 2.24 2.0 0.9 65805660 4 70 2.76 6 2.48 25.0 0.98 65805640 42 70 2.76 64 2.52 25.0 0.98 658056420 46 75 2.95 69 2.72 0.0.8 658056460 55 8.27 8.9.0.0 658056550 65 86.9 94.70 8.0.50 658056650 5 /6" 55 2.7 4.6.0 0.5 6580480 EXTENDED " SQURE DRIVE IMPT SOKETS 24 00.94 9.54 24.0 0.94 658066240 0 00.94 5 2.0 0.0.8 65806600 2 00.94 5 2.09 0.0.8 65806620 00.94 54 2. 0.0.8 6580660 8 00.94 59 2.2.0.0 65806680 4 00.94 6 2.48 5.0.8 65806640 46 5 4.5 69 2.72 5.0.8 658066460 50 25 4.92 75 2.95 8.0.50 658066500 60 25 4.92 87.4 40.0.57 658066600 2 /4" 0 4. 96.78 8.0.50 65804400 Socket Retention ENTRE PIN PIN ND O-RING RETENTION SOKET RETINERS FOR IMPT WRENHES HEX Ø PIN D Ø O RING RET. RING INSIDE Ø FOR USE ON PRT NO. OF RET. RING SQURE DRIVE PRT NO. PRT NO. 6-2 -55467 /8 6 0.64 0.2 65804880 0.52.5 0.4 658044020 /4" /4" -9-55468 /8 6 0.64 0.2 65804880 6 0.64.5 0.4 65804400 /6" /4" 0-4 -4690 /2 20 0.78 0.2 65804900 9 0.76 4.0 0.6 658044040 /8" /4" 5-0 -469 /2 25 0.98 0.2 6580490 24 0.96 4.0 0.6 658044050 /4" /4" 8-4 -55585 2'' /4" /4 5.7 4 0.6 65804920 6.44 5.0 0.9 658044060-55470 24-65 45.77 5 0.9 6580490 45.77 7.0 0.28 658044070 /4" '' -5547 2'' '' 50-90 - /2 75 2.95 0.0 0.9 658044080-55472 2 /8" '' -4692 2 /4" '' -5547 2 /2" '' -469 2 7 /8" /2" -4694 /8" /2" -4695 7 /8" /2" -4696 4 /8" /2" 42