Clamps for Plastic Tubing & Hose Fluid Transfer Specialists
Oetiker Clamps Ear Type Clamps Oetiker ear type clamps breathe and adapt to the expansion and contraction of hose affected by thermodynamics or aging no need to retighten Clamps are lightweight and compact important when bulky screw-type clamps interfere with limited-space applications Provides a tamper-proof seal without damage to the hose One Ear Installation Notes When installing OETIKER EAR TYPE CLAMPS, each ear must be crimped as recommended to obtain a proper seal. An incorrect installation may impair the connection. If a clamp ear can be closed all the way, the clamp size selected is probably too big, and the next smaller clamp should be used. to Apply: Position clamp on hose as shown. /6" to Remove: Grip outer edge of ear firmly and cut through with either pincers. STAINLESS STEEL Made of UNS S000 (DIN.0) or SAE 008/00 (DIN.08) zinc plated carbon steel Features a mechanical lock at the joint instead of a spot weld prevents failure due to corrosion ZINC PLATED 8 007 8 007 8 0086 8 009 8 009 8 00 8 000 8 0 8 0 8 0 8 0 8 06 8 0 8 00 8 09 8 07 8 06 8 06 8 06 8 078 8 077 8 09 8 09 8 006 8 00 8 00 8 09 8 0 8 0 8 08 8 07 8 06 8 06 8 076 8 07 8 090 8 089 8 00 8 00 8 08 8 07 8 0 8 0 8 0 8 06 8 0 Larger sizes are available NOM. OD /8 7/6 / /6 /6 / /6 -/8 -/6 -/ -/6 -/8-7/6 -/ - INCHES OPEN-CLOSED. - 0. -.8.8 -.09. -.9. -.69.7 -.96.68 -..669 -.9.78 -.68.779 -.669.87 -.77.890 -.780.99 -.89.008 -.898.067 -.9.6 -.00.8 -.06. -..0 -.8.6 -.0. -.99.80-8.00 -.78.9 -.7 Notes Give each ear a firm squeeze with your Oetiker Standard Jaw Pincers. Cut ear by taking several small bites at its base with either pincers. Then grip ear firmly and twist off. One Ear Special clamps are available through special order. These clamps feature a one-piece design made from spirally welded tubing to provide a strong grip with a smooth inner and outer band surfaces. The one-ear design allows for easy access. Call for details. Because each application has its own set of variables, application pressures vary. Field testing should be performed to determine the actual maximum pressure for the application. Where access to ear is difficult, use Oetiker Side Jaw or Narrow Jaw Pincers. Stepless clamps may be easily removed by prying end up with a common screwdriver. Limited stock availability; lead times and minimums may apply All Oetiker clamps sold in increments of 00 pieces.
Oetiker Clamps Ear Type Clamps One Ear Stepless 8 8 6 8 79 8 9 8 00 8 07 8 8 9 8 6 8 70 8 77 8 0 8 8 7 8 6 8 67 8 6 8 67 8 687 8 70 8 7 8 77 UNS S000 (DIN.0) Patented design guarantees 60 seal preventing leaks on soft or thin walled hose or tubing One-ear design allows easy accessibility NOM. OD 9/ /6 /8 /6 / 7/ /6 /6 / /6 -/8 -/6-7/6 INCHES OPEN-CLOSED.7 -.8. -.68. -.7.7 -.07.9 -.7. -.6.8 -.8. -.. -.. -..7 -.7.68 -.0.669 -.7.78 -.60.779 -.6.890 -.76.99 -.8.008 -.88.067 -.9.6 -.000.0 -.77. -.9 STAINLESS STEEL 8 670 8 68 8 7 8 70 8 768 8 8 8 8 8 866 8 880 8 96 8 96 8 99 8 00 8 08 8 06 8 076 8 8 8 6 8 60 Two Ear UNS S000 (DIN.0) or SAE 008/00 (DIN.08) zinc plated carbon steel One-piece design made from spirally welded tubing ZINC PLATED 8 669 8 676 8 68 8 7 8 79 8 767 8 8 8 8 8 86 8 879 8 9 8 96 8 99 8 09 8 07 8 06 8 07 8 7 8 8 9 NOM. OD / /6 /6 / /6 /8 9/ /6 -/8 -/6-7/6 INCHES OPEN-CLOSED.6 -..77 -.8.97 -.8.76 -.97 -.76. -.9. -..9 -.9.669 -..708 -.9.787 -.68.866 -.7.906 -.7.98 -.8.06 -.886 -.9.0 -.0.9 -..7 -.60.7 -.78 Limited stock availability; lead times and minimums may apply All Oetiker clamps sold in increments of 00 pieces. PINCERS Use for proper crimping of clamps Durable steel construction Three styles to select from Standard Jaw Pincer 980 08 jaw width Narrow Jaw Pincer 980 000 /8 jaw width for tight areas Side Jaw Pincer 980 00 Dual-purpose design allows clamps to be applied or removed in confined areas with pincers held parallel to the hose. May also be used like Standard Jaw Pincers; jaw width.
Kwik Clamp Nylon Double Bond Hose Clamps Made of durable, black nylon 6-6, a U.L. Recognized Component Will not rust or corrode Easy to install and remove with hose in place; reusable Handles temperatures from -0 F to 0 F Handles most moderate non-hydraulic pressure applications Patented double row of teeth ensures a strong bond that will not vibrate loose RoHS compliant Heat and light stabilized Notes KWIK CLAMPS are typically stored and shipped with a small amount of water. This helps to maintain physical properties and prevents the clamps from drying and/or cracking prior to use. Water does not harm the product. Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Clamps must be used in higher pressure applications; testing recommended. 70 007 70 09 70 06 70 00 70 080 70 07 70 0 70 06 70 0688 70 076 70 08 70 099 70 0996 70 07 70 0 70 7 70 0 70 8 70 8 70 70 6 70 689 70 766 70 8 70 997 70 07 70 70 8 70 0 70 8 70 9 MIN..0.6..6.0.7.6.9.670.7.799.87.96.0..60 0.96.80.70.8.909.6.9.76.9. 0.86.6 MAX..6..6.06.6..9.67.7.8.906.980.6.68.70.9.6.70.89.988.8..8.8.969.69.6.67.00.0 BAND WIDTH.7.8.8.8...7..9.6.6.7.6.6.6. BAND THICKNESS.0.06.06.067.067.067.09. Limited stock availability; lead times and minimums may apply All part numbers up to and including 70 0 sold in bags of 00 pieces. All others sold in bags of 0 pieces.
Worm Gear Clamps Stainless Steel Clamps Ideal -Tridon branded clamps All-steel construction for durability Miniature, marine grade, and lined types available Simple screw tightening method Wide range of uses Note that sizes are listed first due to the variety of materials offered MINIATURE CLAMPS DIAMETER RANGE NOM. MIN. MAX. /8 -/ 7/ /6 7/6 /6 -/ - SERIES M 80 7 80 9 SERIES 00 80 7 80 6 80 97 80 80 67 SERIES 6M 80 99 80 07 80 06 80 097 80 80 67 80 0 STANDARD CLAMPS DIAMETER RANGE SERIES 6 SERIES 60 SERIES NOM. MIN. MAX. -/ - -/ - - -/ - - - - 6 /6 -/6 - - -/6 -/6 - - -/6 - - - -/ - -/ - - -/ - - - - 6 6-7 LINED CLAMPS DIAMETER RANGE NOM. MIN. MAX. /6 - -/ - -/6 - - -/6 /6 -/8 -/8 -/ - - 80 76 80 797 80 8 80 867 80 90 80 97 80 97 80 007 80 0 80 077 80 80 7 80 8 80 7 80 80 7 SERIES 6 80 9 80 987 80 0 80 07 80 6 80 97 80 80 67 80 87 80 86 80 897 80 9 80 967 80 00 80 07 80 07 80 07 80 80 77 80 80 7 80 8 80 7 80 80 87 80 80 7 80 0067 80 00 80 07 80 07 80 007 80 0 80 077 80 0 80 08 80 07 80 0 80 087 80 0 80 07 80 09 80 067 80 066 80 0697 Limited stock availability; lead times and minimums may apply All worm gear clamps sold in increments of 0 pieces. Notes SERIES M / 00 Miniature Band: /6 wide, 0 Housing: carbon steel, clear chromate dipped Screw: combination / hex head slotted, 08 carbon steel, clear chromate plated SERIES 6M Miniature, Automotive Grade Band: /6" wide, 0 Housing: 0 Screw: combination /" hex head slotted, 0 SERIES 6 Band: " wide, 0 to nom; 0 - nom & above Housing: 0 Screw: combination /6" hex head slotted, 08 carbon steel, clear chromate plated SERIES 60 Band: " wide, 0 Housing: 0 Screw: combination /6" hex head slotted, 0 SERIES Marine Grade Band: " wide, 0 Housing: 0 Screw: combination /6" hex head slotted, 0 SERIES 6 Lined Clamp for Soft Tubing Lining prevents soft tubing, such as silicone, from extruding through band notches during clamp application Band: " wide, 0 Lining: 0 Housing: 0 Screw: combination /6" hex head slotted, 08 carbon steel, clear chromate plated
Tubing Options PVC A Wide Range of Styles Chemical and corrosion resistance with rubber-like flexibility Choose from various construction options: braid reinforced, unreinforced, rigid pipe, wire reinforced, push-on style, spiral reinforced NSF and DEHP-free versions available Applications include general industrial, food, pharmaceutical and medical, protective coverings, insulation sleeving, equipment components, many more Silicone Platinum or Peroxide Cured, Medical Grades Braid-Reinforced hose or unreinforced tubing Flexible, resilient, odorless Ingredients meet USP Class VI, FDA, and NSF- requirements Handles temperatures ranging from -00 F to 00 F Suction hose offers full vacuum rating Polyurethane Braid-Reinforced, Unreinforced, Colors Select from reinforced hose, unreinforced tubing, or a special formulation for pneumatic applications Naturally flexible no plasticizers to migrate out and cause flow contamination Resistant to weathering, U.V. radiation, moisture, chemicals, petroleum products Well-suited for applications involving repeated flexing, vibration, abrasion situations, radiation exposure, impact Request a Fittings & Clamps catalog Inside you ll find details on all of NewAge Industries barbed fittings and clamps. Catalogs for PVC, polyurethane, silicone, fluoropolymer, rubber, and semi-rigid tubing and hose are available, as well as pushto-connect fittings and custom products. Contact your NewAge Industries sales representative or local distributor to request a copy of the catalog you need, or visit. Kwik Clamp, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Oetiker reg. TM Oetiker, Inc. Ideal and Tridon reg. TMs Ideal Clamp Products, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge. This warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability. The data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 9. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 06 Specifications are subject to change without notice. 9//6 DISTRIBUTOR PARTNER James Way Southampton, PA 8966 800-0-NEWAGE (800-06-9) -6-00 Fax: 800-87-86-6-90 info@newageindustries.com