Technical Information ontents V 25 164 V 3 165 are used when checking the locking in of the connector contacts into connectors. The are available with spring forces up to 34N, which represents the spring-force demanded during testing connector contacts. They distinguish themselves with their rugged design and the necessary high installation heights. V 4 166 V 5 16 To prevent the mainly rectangular/spade-type tip-styles from rotating, all have a non-rotating design.
V 25 øs. tbl. Spring orce: Gold = 10N(36 oz.) Silver = 15N(54 oz.) ø2,1 ø ø2 ø1,9 ø0,9 (.083) (.09) (.08) (.035) Grid: 2,54 100 Mil Recoended Stroke: 5,0 (.19) vailable s 2 03 2,20 (.08) 2 29 2,5 0,8 258 10 4,5 22,5(.886) (.394) (.1) 69,5 (2.36) V25 3,5 20(.8),5 1,5 (.138) (.295) (.059) 2 29 1,9 0,3 193 H-V 25 Ø1,95 Ø2,1 (.0) (.083) (.26) 40,5 (1.594) Working Stroke: 5,0 (.19) Maximum Stroke: 6,0 (.236) Spring orce at Work. Stroke: 10 N (36oz); 15 N (54oz) Interchangeable Stroke: > 6,0 (.236) 5 < 50 mw s ronze, gold-plated in EM 1 and R 4: 2,00 (.08) ssembly Notice: The patented design allows the test probe (consisting of plunger and spring) to be easily exchanged according to the following procedure: press the Plunger into the Receptacle until it reaches it s limit turn the Plunger 90 release the Plunger In order to stabilize the Test Probe and to avoid damage to the Receptacle during mounting and dismounting, we recoend that either an additional guide plate be inserted underneath, or that the Guide ush H-V 25 be attached to the end of the Recepatcle after mounting, and subsequently soldered to secure it. = Gold Spring orce Receptacle (pre-wired with 0,2m Wire WG 34): Guide ush: V 2 5 2 2 9 1 9 3 1 5 0 K S - V 2 5 K S - V 2 5 V H - V 2 5 164 ll specifications are subject to change without prior notification
Grid: 3,00 120 Mil : 40,5/44,5/46,5 (1.595/1.52/1.831) Recoended Stroke: 5,0 (.19) vailable s V 3 Screw-in Test Probes s. tbl. 6 12, 5,8 16,3 2,9 (.500) (.228) (.642) (1.098) (.26) V3 (.236) ø1 SW2,2 Ø2,6 ø2,19 M2 Ø0,9 (.035) (.039) (.08) (.102) (.086) (.09) 0,6 (.024) E 5,8 16,3 2,9 (.228) (.642) (1.098) (.26) V3 220... (see table) Ø2, Ø2,5 Ø2,44 (.106) (.098) (.096) ø1 SW2,2 Ø2,6 ø2,19 M2 Ø0,9 (.035) (.039) (.08) (.102) (.086) (.09) 0,6 (.024) 2 02 2 03 2 05 2 06 2 20 ø 0 1,90 (.05) 1,50 1,80 2,20 3,00 (.059) (.01) (.08) 1,0 (.06) 0 2,00 (.09) see Table 2,0 3,00 (.106) Screw-in High-current Probes Screw-in Switching Probes 5, (.224) 20,(.815) 34(1.339) D (s. tbl.) KS-V3 Part No. Working Stroke: 5,0 (.19) Maximum Stroke: 5,5 (.21) Spring orce at Work. Stroke: 5,0 N (18oz); 10,0 N (34.6oz); 15,0 N (54oz) -Ø Width of Spade in 8 Length of Spade in s arrel: D Installation Height in E Height in Total Length V3 220 250 080 405 xx 2,5 (.098) 0,8 (.031) 6,0 (.236) 40,5 (1.594) 12, (.500) 69, (2.44) V3 220 250 050 405 xx 2,5 (.098) 0,5 (.020) 6,0 (.236) 40,5 (1.594) 12, (.500) 69, (2.44) V3 220 250 150 405 xx 2,5 (.098) 1,5 (.059) 6,0 (.236) 40,5 (1.594) 12, (.500) 69, (2.44) V3 220 190 050 405 xx 1,9 (.05) 0,5 (.020) 6,0 (.236) 40,5 (1.594) 12, (.500) 69, (2.44) V3 220 190 080 405 xx 1,9 (.05) 0,8 (.031) 6,0 (.236) 40,5 (1.594) 12, (.500) 69, (2.44) V3 220 400 060 445 xx 4,0 (.160) 0,6 (.024) 10,0 (.394) 44,5 (1.52) 16, (.65) 3, (2.902) V3 220 220 120 405 xx 2,2 (.08) 1,2 (.04) 6,0 (.236) 40,5 (1.594) 12, (.500) 69, (2.44) V3 220 20 080 405 xx 2, (.106) 0,8 (.031) 6,0 (.236) 40,5 (1.594) 12, (.500) 69, (2.44) V3 220 250 080 465 xx 2,5 (.098) 0,8 (.031) 12,0 (.42) 46,5 (1.831) 18, (.36) 5, (2.980) in EM 1 and R 4: 2,5 (.098) with KS: see Table V 3 will be screwed into KS-V 3 using special tools (see Page 10/11). Min.: 3 Ncm / Max.: 5 Ncm R / Digital Non-rotating Probes () Width of Spade () = Gold Installation Height (1/10 ) Spring orce V 3 2 2 0 2 5 0 0 8 0 4 0 5 0 5 K S - V 3 ll specifications are subject to change without prior notification 165
V 4 Grid: 4,00 15 Mil Recoended Stroke: 5,0 (.19) øs. tbl. ø1,35 SW2,5 ø3,6 ø3 M2,5 ø1,3 (.053) (.098) (.142) (.098) (.051) vailable s 11,3 12,5 5,8 16,5 2,8 (1.094) (.490) (.445) (.230) (.26) (.650) 69,5(2.36) V4 6,8 (.268) 2 02 1,80 (.01) 2 02 0 2 03 3,00 4,00 (.15) ø3, ø3,5 ø3,45 (.146) (.138) (.136) 2 06 3,00 4,00 (.15) 2,5 2 21* 0,80 0,8 6 (.031) Ø 5, (.224) 34 (1.339) 2,2 2 23* 1,60 1,6 6 (.063) Ø KS-V4 40,5 (1.594) Working Stroke: 5,0 (.19) Maximum Stroke: 5,5 (.220) Spring orce at Work. Stroke: 15 N (54oz) alternative: 25 N; 20 N (2oz) 8 s arrel: ronze, gold-plated in EM 1 and R 4: 3,50 (.138) V 4 are screwed into KS-V 4 using special tools, see page 10/11. Min.: 3 Ncm / Max.: 5 Ncm * / width of spade = Gold Spring orce V 4 2 0 2 1 8 0 1 5 K S - V 4 166 ll specifications are subject to change without prior notification
Grid: 5,08 200 Mil : 36, (1.445) Recoended Stroke: 5,0 / 9,5 (.19/.34) vailable s V 5 Screw-in Test Probes s. tbl. ø SW3 ø4,6 ø4 M3,5 ø1,8 (.181) (.15) (.138) (.01) 22 14, 41(1.614) 18,3 (.866) (.59) 96(3.80) (.20) V5 ø4,35 ø4,4 ø4,6 (.11) (.13) (.181) 16,5 13,5 (.650) (.531) 30 (1.181) KS-V5 030 3 20 1,40 1,4 12 (.055) 2,8 3 20* 1,50* 1,5 12 (.059) 3 20 1,60 1,6 12 (.063) Screw-in High-current Probes R / Digital Screw-in Switching Probes 3 20 1,80 1,8 12 (.01) 36, (1.445) with KS: 36, (1.445) Spring orce at Pre-load Working Stroke Maximum Stroke Work. Stroke in in 15 N (54oz) 2, N (10oz) 9,5 (.34) 10* (.394)/12 (.42) 20 N (2oz) 3,6 N (13oz) 9,5 (.34) 10* (.394)/12 (.42) 34 N (122oz) 10,0 N (36oz) 5,0 (.19) 6,5 (.256) * Maximum Stroke of V5-320 150 096 with 15 N and 20 N = 10,0 (.394) V 5 are screwed into KS-V5 030 using special tools, see page 10/11. Min.: 10 Ncm / Max.: 20 Ncm Non-rotating Probes s arrel: eu, gold-plated in EM 1 and R 4: 4,0 resp. 4,4 (.155) resp. (.132) 10 To recognize the spring force, the flat areas for the spanner are marked with notches: 1 notch 15 N (54oz) 2 notches 20 N (2oz) 3 notches 34 N (122oz) 3 = eu = Gold Total Length Spring orce (N) V 5 3 2 0 1 5 0 0 9 6 2 0 K S - V 5 0 3 0 ll specifications are subject to change without prior notification 16