Wir im Allgäu. MAHA Two Post Lifts Model: ECON III 3.0 ECON III 3.5 ECON III 4.0 ECON III 5.0 HL III 4.0 HL III 5.0 Lifting Technology DIN EN ISO 9001:2008 ISO 14001:2004 SINCE 1969 For passenger cars and commercial vehicles up to 5.0 t gross weight
ECON III Wear-resistant, maintenance-free proximity switch for non-contact height measurement Permanent self-monitoring of all safety functions: Long life by HWR system High stability by optimised carriage and column profile High safety level by positive engagement of toothed arm restraints Danger zone monitoring with acoustic signal CE-Stop Application Ergonomic foil keypad. Asymmetrical lifting carriage and support arms for ample door clearance. Suitable for mini cars... 2
Technology Maintenance-free swivel bearing with lifetime lubrication for upper lifting screw support Low-maintenance lubrication system ensures optimum supply to load and safety nut and allows large maintenance intervals Smooth operation by concavo-convex load and safety nut assembly - Synchronization - Phase failure - Belt failure - Load nut failure - Motor overload - Electronic shutdown at limit stop and if obstruction detected Additional control unit (option) 180 swivel range of short support arms allows easy positioning of adapters at vehicle lift points Support arm swival directly over the floor not the base plate Base plate thickness not added to the support arm cleanrance Low clearance height Optional Sports car support arm total clearance 75 mm (3 t) possible Stress-free support of lifting screw by articulated friction bearing...and vans with long wheelbase (ECON III 4.0 t / ECON III 5.0 t). Easy access by generous lifting height. High flexibility and safety with MAHA support plate plug-on system. 3
3.0 t / 3.5 t Two Post Lift Model: ECON III 3.0 / ECON III 3.5 for passenger cars and commercial vehicles up to 3.5 t gross weight Technical Advantages Permanent self-monitoring of all safety functions Short raising and lowering time High stability by optimised carriage and column profile Proven MAHA plug-in system is part of standard delivery Wear-resistant, maintenance-free proximity switch for non-contact height measurement Maintenance-free swivel bearing with lifetime lubrication for upper lifting screw support Tension-free lifting screw mounting by articulated friction bearings High safety level by form lock of all arm restraint teeth Short support arms with 180 swivel range 5-year warranty on lifting screw and nut by HWR system Sports Car Support Arms (option ECON III 3.0) 4 The best selling lift
Specifications Model ECON III 3.0 ECON III 3.5 Load capacity CE 3.0 t 3.5 t Lifting height max. H O 2000 mm 2000 mm Full travel H W 1880 mm 1880 mm Raising/Lowering time 40 s / 40 s 40 s / 40 s Lifting height min. H U 95 mm 110 mm Disc adjustment range H T 90-125 mm 90-125 mm Reach of short support arm L K 560-850 mm - Reach of short support arm, double telescopic L T 600-1160 mm 660-1260 mm Reach of short support arm, double telescopic, with parallelogram adapter 758-1180 mm 758-1180 mm Reach of long support arm L L 945-1505 mm 930-1505 mm Outside baseplates B G 3280 mm 3380 mm Outside columns B A 3060 mm 3160 mm Inside columns B L 2600 mm 2700 mm Drive-through clearance B H 2325 mm 2425 mm Column height H S 2890 mm 2890 mm Height overall H G 4490 mm 4490 mm Net weight 620 kg 650 kg Motor power 2 x 2.4 kw 2 x 2.4 kw Power supply 3 x 400 V, 50 Hz 3 x 400 V, 50 Hz Fuse protection 16 A time delay 16 A time delay 5
Two Post Lift Model: ECON III 4.0 for passenger cars and commercial vehicles up to 4.0 t gross weight 4.0 t Technical Advantages Permanent self-monitoring of all safety functions Short raising and lowering time Universal support arms with large extension length, for mini cars and for vans with long wheelbase Proven MAHA plug-in system is part of standard delivery High stability by optimised carriage and column profile Wear-resistant, maintenance-free proximity switch for non-contact height measurement Maintenance-free swivel bearing with lifetime lubrication for upper lifting screw support Tension-free lifting screw mounting by articulated friction bearings High safety level by form lock of all arm restraint teeth Short support arms with 180 swivel range 5-year warranty on lifting screw and nut by HWR system 6 The universal lift
Specifications Load capacity CE Lifting height max. H O Full travel H W Raising/Lowering time Lifting height min. H U Disc adjustment range H T Reach of short support arm, double telescopic L T Reach of long support arm, extra long L XL Outside baseplates B G Outside columns B A Inside columns B L Drive-through clearance B H Column height H S Height overall H G Net weight Motor power Power supply Fuse protection 4.0 t 2000 mm 1880 mm 40 s / 40 s 115 mm 90-125 mm 660-1260 mm 1095-1840 mm 3420 mm 3205 mm 2730 mm 2465 mm 3140 mm 4740 mm 750 kg 2 x 3,0 kw 3 x 400 V, 50 Hz 16 A time delay 7
Two Post Lift Model: ECON III 5.0 for passenger cars and vans up to 5.0 t gross weight 5.0 t Technical Advantages Permanent self-monitoring of all safety functions Comes standard with 4 double telescopic support arms with large extension range, for mini cars and for vans with long wheelbase Rugged support arms with low bottom clearance Proven MAHA plug-in system is part of standard delivery Support arm extension support (Optional) High stability by optimised carriage and column profile Wear-resistant, maintenance-free proximity switch for non-contact height measurement Maintenance-free swivel bearing with lifetime lubrication for upper lifting screw support Tension-free lifting screw mounting by articulated friction bearings High safety level by form lock of all arm restraint teeth Short support arms with 180 swivel range 5-year warranty on lifting screw and nut by HWR system Wheel-Engaging Support Forks (option) 8 The Power House
Specifications Load capacity CE Lifting height max. H O Full travel H W Raising/Lowering time Lifting height min. H U Disc adjustment range H T Reach of support arm, double telescopic L T Outside baseplates B G Outside columns B A Inside columns B L Drive-through clearance B H Column height H S Height overall H G Net weight Motor power Power supply Fuse protection Concrete grade 5.0 t 2020 mm 1880 mm ca. 40 s / 40 s 140 mm 110-140 mm 914-2000 mm 3900 mm 3543 mm 3023 mm 2730 mm 3138 mm max. 5043 mm 995 kg 2 x 3.5 kw 3 x 400 V, 50 Hz 16 A time delay min. C20 / C25 9
Two Post Lift, electro-hydraulic Model: HL III 4.0 / HL III 5.0 for cars and vans up to 5 t gross weight 4,0 t / 5,0 t Technical Advantages Baseframe-free column design No bothersome cross support between posts No base frame, free of floor obstacles Low energy consumption. Electronic-hydraulic synchronization control, no synchronization cable Permanent self-monitoring of all safety functions. Easy, quick installation. Asymmetrical version of support arm for optimum door clearance (HL III 4.0). Safety latches activated via gravity, automatically unlockable. Pinch point protection using acoustic signal CE Stop. Emergency DOWN function at power outage. 10 The economical lift
Specifications Model HL III 4.0 HL III 5.0 Load capacity CE 4.0 t 5.0 t Lifting height max. H O 1925 mm 1945 mm Full travel H W 1805 mm 1805 mm Raising/lowering time load-dependent ca. 43 s / 38 s ca. 43 s / 38 s Total clearance height support arm H U 115 mm 140 mm Disc adjustment range H T 90-125 mm 110-140 mm Reach of short support arm, double telescopic L T 596-1182 mm 919-2005 mm Reach of long support arm L L 930-1505 mm - Total width B G 3420 mm 3900 mm Outside column width B A 3244 mm 3543 mm Inside columns B L 2800 mm 3023 mm Drive-through clearance B H 2448 mm 2731 mm Column height H S 3021 mm 3024 mm Total lift height completely raised H G1 3782 mm 3785 mm Total height with cable bridge H G2 4704 mm 4707 mm Net weight without / with packaging 705 kg / 820 kg 950 kg / 1120 kg Motor power 1.5 kw 1.5 kw Power supply 3 x 400 V, 50 Hz 3 x 400 V, 50 Hz Fuse protection 16 A time delay 16 A time delay Concrete grade C 20 / 25 C 20 / 25 11
Accessories / Options Control unit on second column incl. power supply set for ECON II. Extenders 50 / 100 / 150 / 200 mm incl. tray. Vehicle special adapters: MB GW 460/463, lifting arbor MB Sprinter, special-prism MB Sprinter / VW Crafter, plug-in system, T4 slip-security. Parallelogram adapter for ECON III 3.0 / 3.5. Wheel nut tray mounted to column. High flexibility and safety with MAHA support plate plug-in system (standard delivery). Holder for impact wrench. Support arms, telescopic and double telescopic ECON III 3.0 (option). MAHA Maschinenbau Haldenwang GmbH & Co. KG. Hoyen 20 87490 Haldenwang Germany Tel.: +49 (0)8374-585-0 Fax: +49 (0)8374-585-497 Internet: www.maha.de E-Mail: sales@maha.de Support arm extensions running on roller bearings ECON III 5.0 / HL III 5.0. Overhead cable guide, standard with ECON III. Power supply block incl. sockets and compressed-air connections ECON III. Installation material / Injektron anchor system. Production Program: Testing Technology for Cars, Trucks, Motorcycles, Tractors, Forklifts, Aircraft Roller Brake Testers Platform Brake Testers Shock Absorber and Suspension Testers Side-Slip Testers Play Detectors Roller Dynamometers for Performance and Function Testing Speedometer Testers Tachograph and Taximeter Testers Axle and Wheel Load Scales Scissors Lifts Two- and Four-Post Lifts In-Ground Lifts Pit Jacks Axle and Transmission Jacks Mobile Column Lifts Headlight Testers Diesel Smoke Meters Emission Testers for Petrol and Gas Engines Sound Level Meters Air Conditioning Service Equipment Decelerometers Closing Force Meters Brake Fluid Testers Complete Test Lanes for Cars and Trucks Mobile Test Containers Wheel Alignment Analysers Wheel Balancers Tire Changers. Additional Services: Workshop Design and Planning Training Seminars for Users and Service Technicians MAHA Australia Brisbane Australia MAHA Brasil São Paulo Brazil MAHA Chile Santiago Chile MAHA China Peking, Shanghai China MAHA España Girona Spain MAHA France Strasbourg France MAHA India Delhi India MAHA Ireland Dublin Ireland MAHA Japan Tokyo Japan (Rep. Office) MAHA Polska Tarnowskie Góry Poland MAHA Russia St. Petersburg Russian Fed. MAHA Singapore Singapore (Rep. Office) MAHA South Africa Johannesburg South Africa MAHA U.K. Wisbech Great Britain MAHA USA Dothan AL USA Certification of environmental management system MAHA Umwelt- Management ISO 14001:2004 BR360001-en 10 Subject to change without notice! The illustrations also show options which are not standard equipment.