KEPLER & JULES VERNE PRICE LIST 2018 E
BASE VEHICLES AND OPTIONS Models Recommended retail price incl. 20% tax KEPLER One Volkswagen T6 102 HP / Candy White / TEP Arizona Euro 6 52,500.00 KEPLER Six Volkswagen T6 102 HP / Candy White / TEP Arizona Euro 6 52,500.00 JULES VERNE Mercedes Vito 114 HP / Arctic White / TEP Arizona Euro 6 54,500.00 Right hand drive on Volkswagen T6 2,250.00 VW Kepler option pack Painted bumpers Automatic light ignition/windscreen wipers Rear sensors Car radio with 5 screen Total value 1,735.00 Package price 345.00 You are saving: 1,390.00 Volkswagen T6 base vehicle options Kepler RRP incl. 20% tax 150 HP engine - 3,025.00 Automatic gearbox (for 150 HP engine only) - 2,750.00 Load increase to 3,000 kg instead of 2,800 kg (compulsory when Kepler Six increases to 6 registered seats) - 866.00 Mojave beige / Indium grey metallic paint - 1,690.00 Painted handles and rear view mirrors - 90.00 16 aluminium rims - 765.00 Leather steering wheel and multifunction controls - 830.00 Park pilot with front / rear sensors and reversing camera - 1,045.00 Fog lights - 415.00 Navigation system with Europe maps including car radio with 5.8 screen - 1,855.00 Coupling pre-equipment (including coupling stabilisation) - 250.00 Fixed coupling equipment (including coupling stabilisation) - 995.00 Removable/locking coupling equipment (including coupling stabilisation) 1,230.00
BASE VEHICLE & LIVING AREA Mercedes Vito base vehicle options Kepler RRP incl. 20% tax 136 HP engine - 2,277.00 163 HP engine - 4,845.00 7 Gtronic PLUS automatic gearbox (only for 136 HP / 163 HP) - 2,650.00 Silver grey Adamantin / blue Cavansite metallic paint - 2,140.00 16 aluminium rims (10 spokes) - 905.00 Multifunction controls on steering wheel - 460.00 Park pilot with front/rear sensors (includes multifunction steering controls and car radio with 5.8 screen) - 2,040.00 Chromed radiator grill - 335.00 Tinted windows - 960.00 Fog lights - 255.00 Ball coupling, fixed (+22kg) - 930.00 Navigation system with Europe maps including car radio with 5.8 screen - 835.00 Living area options Linoleum protection kit 150.00 Cab separation curtain 220.00 Roof insulation kit 550.00 Diesel heating for Kepler Six - 1,600.00 Diesel water heating / heating (includes outdoor shower with hot /cold water) for Kepler Six - 3,400.00 Outdoor camper pack (1 table + 2 chairs) for Kepler Six - 297.00 Extra storage chest for Kepler Six - 487.00 1 extra living area seat for Kepler Six - 1,300.00 Tailgate tent 490.00 Mosquito net for side door (not installed) - 180.00 Mosquito net for tailgate door (not installed) - 180.00 Fiamma F35 PRO 250 deep black royal grey awning 432.00 Fiamma VW T6 Kepler awning installation kit - 115.00
BASE VEHICLE & LIVING AREA Living area options Kepler RRP incl. 20% tax Fiamma awning installation kit for Mercedes Vito - 129.00 Bike rack for tailgate - 2 bikes (not installed) 490.00 Bike rack for tailgate - 4 bikes (not installed) 790.00 2nd battery for Kepler (not possible for ) - 370.00 2nd battery for Kepler with Start & Stop compatibility and backup battery charging - 490.00 Extra flat solar panel 850.00
STANDARD EQUIPMENT Base vehicle Kepler One Kepler Six Mercedes Vito Bodywork type L2H1 L2H1 long Engine 2.0 l TDI 2.0 l TDI 111CDI Wheelbase (mm) 3403 3403 3200 Maximum Authorised Mass (MAM) in kg 2800 2800 2800 Emissions standard Euro 6 Euro 6 Euro 6 ABS ESP Comfortable seats with armrests and swivel bases Electric, de-icing rear view mirrors Daytime running lights Driver and passenger airbags Cab speakers & car radio P P Cruise control Cab air conditioning Hubcaps General Length (m) 5.30 5.30 5.14 Overall width (wing mirrors folded) (m) 2.09 2.09 2.06 Height (m) (+/ - 3%) 1.99 1.99 1.99 Registered seats 4 4/5/6* 4 Berths 2+2 2+2 2+2 * 4 seats as standard. Option of increasing to 5/6. Important: In order to have 6 registered seats, you must purchase the Supplement for 3,000 kg MAM
BASE VEHICLE Berth dimensions (L x W in mm) Kepler One Kepler Six Mercedes Vito Convertible dining area bed 1,900 x 1,230 2,000 x 1,200 1,800 x 1,190 Pop-up roof fold-away bed 1,900 x 1,200 1,900 x 1,200 1,900 x 1,170 Bodywork XHP Xtreme Hybrid Protect insulation = polyether-loaded polyurethane compound with aluminium sheet Internal walls moulded to the bodywork Central locking on cab and living area doors with remote control Kitchen Stove top / sink combination with covers and piezzo ignition Glossy laminated worktop Storage under kitchen unit with drawers / pot drawers Compressor fridge (l) 51 40 51 Bathroom area Hot/cold water shower head * Fitted shower tray - 19-litre removable cassette bench toilet - * Included in the diesel water heating / heating option
STANDARD EQUIPMENT Water Kepler One Kepler Six Mercedes Vito Fresh water tank (l) 50 40 50 Waste water tank (l) 36 30 36 Electrical water pump 10 l hot water gas boiler - Fresh and waste water tank gauges Heating WEBASTO 2000 W Diesel - Energy Semi-stationary backup battery with coupler and separator with circuit breaker 100 Ah 100 Ah 100 Ah Transformer - charger Thermal magnetic circuit breaker differential 30 ma Central fuse box with protected Accessories sockets 230V outdoor sockets - 230V indoor sockets Gas bottle capacity 2.75 kg 2.75 kg 2.75 kg LED interior lighting LED ambient lighting = Standard Equipment - = Not available = Optional Equipment P = Package
K_JV_02/08_17_GB All prices are 20% tax inclusive. Published August 2017. Subject to changes. Inspection not included. The General Terms and Conditions of Westfalen Mobil GmbH shall apply. No liability is accepted for printing errors and mistakes. Subject to technical changes. Vehicles are partly shown with optional extras, which do not correspond to the standard equipment (refer to article 2, clause 2 VO (EU) 1230/2012). A purchase contract can only be concluded with your binding order and the order confirmation of your dealer. The water supply system at least corresponds to standards practices 07/2011 (Directive 2002/72/ EC). Subject to changes in price, technical details, facilities and equipment, as well as design concept. The information about the scope of delivery, appearance and performance corresponds to the knowledge available at the time of printing. Deviations of +/- 5% are possible for dimensional and weight data, even in running order, and the technically permissible total mass. As per art. 2, clause 4 a) VO (EU) 1230/2012, the mass in running order is, unless otherwise specified in the catalogue, in the price lists or in the technical specifications, or unless otherwise agreed upon with your seller, defined as: The vehicle mass with the standard equipment as per manufacturer s specifications incl. driver (75 kg), fuel tank filled up to 90 %, systems containing fluids filled up to 100 % (annexe V, clause 2.6, footnote (h) VO (EU) 1230/2012) as well as, if available, the trailer equipment, the mass of the spare wheel and of the tool. Special equipment (additional equipment) and accessories increase the mass in running order and reduces the cargo load. Cargo load as per the catalogue specifications is defined as: Difference between the technically permissible total mass and the mass in running order. Refer to our prospectus or ask your dealer/seller for the weight of the special (additional) equipment and of the accessories. The maximum permissible number of persons given is dependent on the weight and axle load. It can be reduced as a result of the installation of special equipment (additional equipment) and accessories, so that individual seats cannot be used in favour of load-carrying capacity. If all seats are supposed to be used, payload must be properly adjusted. The technically permissible total mass as well as the axle loads must not be exceeded. The load-carrying capacity may be reduced as a result of the installation of special equipment (additional equipment) and accessories. The minimum cargo load must be adhered to at all times (refer to annexe I, clause 2.6.4.1.2 VO (EU) 1230/2012). The minimum cargo load is calculated as follows: Minimum cargo load in kg = (vehicle length in meters + maximum number of co-passengers + driver) x 10. Moreover, the load-carrying capacity is not only dependent on the mass in running order, the actual vehicle mass (article 2, clause 6 VO (EU) 1230/2012), the weight of the accessories and the technically permissible total mass, but also on the respective axle loads. In order to utilise the maximum load-carrying capacity of the vehicle requires axle-dependent load distribution. This must be verified before commencing every journey. Even all other regulations necessary for the safe operation of the vehicle must be adhered to when using the vehicle. Mass and weight data is specified in accordance with VO (EU) 1230/2012 unless deviating regulations are made in the catalogues, price lists or the technical data. westfalia-mobil.de Westfalen Mobil GmbH Franz-Knöbel-Straße 34 D-33378 Rheda-Wiedenbrück Fon +49 (0) 52 42 / 15-0 Fax +49 (0) 52 42 / 15-471 infoservice@westfalia-mobil.de