rice List Effective February 11, 2008 VC Solvent Weld Third party tested and listed by NSF, UC and CSA to meet ITEM IN INCHES SIZE NUMBER ART BOX QTY CRATE QTY RICE LIST Solvent Weld Sewer Fittings ITEM SDR IN INCHES NUMBER 35QTY QTY RICE Injection Molded in Sizes 3 12 Fabricated in Sizes 10 27 Solvent Weld Sewer SDR 35 **DENOTES FABRICATED FROM MOLDED COMONENTS lastic Trends, Inc 56400 Mound Road Shelby Twp., MI 48316 586-781-2700 800-232-5690 Fa: 586-781-0888 www.plastictrends.com 33
Solvent Weld Injection Molded 800-232-5690 in Sizes 3 12 Fabricated in Fa: Sizes 586-781-0888 10 27 Applications lastic Trends has the SIZE broadest IN ART product BOX offering CRATE of LIST ITEM INCHES NUMBER QTY QTY RICE Solvent Weld Sewer fittings in the industry. They conform to all municipal, federal, and military requirements. They are tested for joint tightness, internal stress and dimensional stability. The is engineered for the harsh environment of construction, shipping, handling and installation. Listed below are some of the uses of Solvent Weld Sewer fittings: Onsite Disposal - Closed loop septic fields - Open system septic fields - Engineered systems Surface Drainage - Foundation Drains - Radon Gas Venting - Yard Drainage Downspouts ool Drainage Area Drainage Landscape Drainage Laterals to Municipal Sewers (sanitary & storm) Certifications lastic Trends Solvent Weld Sewer fittings are third party tested and listed by NSF, UC, and CSA to meet specifications defined in ASTM D 3034 and CSA B181.2. VC Solvent Weld Third party tested and listed by NSF, UC and CSA to meet roduct Spotlights Square X Countersunk SIZE Threaded ART lug BOX CRATE LIST (1144, 1146, 11410, 11412) SquareX is a major advance in countersunk threaded plug design. It features a unique molded-in shape and installs in seconds. Two standard screwdrivers provide plenty of leverage to tighten or loosen the plug. VC threaded plugs are notorious for being difficult to remove and are often destroyed in the process. SquareX significantly improves the removal process and reduces the potential for breakage. FlushMount Downspout Adapters FlushMount lets you install pipe right up against the wall. They connect a downspout to either a smooth wall sewer pipe or corrugated drain pipe. Available in sizes 3, 4 and 6. Refer to page 42 for available configurations and pricing. IntelliCap and IntelliDisc The smarter solution for locating underground utilities. Now, with the lastic Trends IntelliCap and IntelliDisc you no longer need to guess and dig for the location of the access plug. These two new additions to the lastic Trends line allow you to easily locate underground risers or municipal services through backfill, snow or overgrown vegetation up to five feet deep. Refer to page 43 for available configurations and pricing. Short Specs Solvent Weld (3-12 ) 3 through 12 injection molded solvent weld SDR 35 sewer fittings shall be manufactured in accordance with ASTM D 3034 and CSA B182.2. They shall be molded from virgin VC compound having a minimum cell classification of 12454-B in accordance with, and certified by the National Sanitation Foundation (NSF), to meet ASTM D 1784. Solvent weld SDR 35 sewer fittings shall be certified by the National Sanitation Foundation (NSF) to meet ASTM D 3034, and, in applicable configurations, by the International Association of lumbing and Municipal Officials (IAMO) to meet ASTM D 3034 and by the Canadian Standards Association (CSA) to meet CSA B182.2. Attention: lastic Trends fittings are not to be used with compressed air or gases. lastic Trends does not recommend that piping systems that include its products be tested with compressed air or gases. **DENOTES FABRICATED FROM MOLDED COMONENTS 34 lastic Trends, Inc 56400 Mound Road Shelby Twp., MI 48316 586-781-2700 800-232-5690 Fa: 586-781-0888 www.plastictrends.com
rice List Effective February 11, 2008 VC Solvent Weld Third party tested and listed by NSF, UC and CSA to meet STRAIGHT TEE HHH * 3 102 30-5.14 * 4 104 20-7.43 * 6 106 6-28.97 * 6 4 116 4-29.56 * 8 108 3-120.88 * 8 4 108-4 4-64.81 * 8 6 108-6 2-80.19 * 10 1010 1 10 379.09 * 10 4 1010-4 1 12 217.96 * 10 6 1010-6 1 18 250.87 * 10 8 1010-8 1 10 314.19 * 12 1012 1 6 568.74 * 12 4 1012-4 1 8 304.41 * 12 6 1012-6 1 8 328.44 * 12 8 1012-8 1 8 391.33 * 12 10 1012-10 1 7 420.04 15 1015 1-879.95 15 4 1015-4 1-447.89 15 6 1015-6 1-517.26 15 8 1015-8 1-562.64 15 10 1015-10 1-596.99 15 12 1015-12 1-724.94 18 1018 1-1,492.99 18 4 1018-4 1-1,142.97 18 6 1018-6 1-1,183.12 18 8 1018-8 1-1,237.69 18 10 1018-10 1-1,286.86 18 12 1018-12 1-1,323.05 18 15 1018-15 1-1,411.82 21 1021 1-3,399.71 21 4 1021-4 1-1,623.92 21 6 1021-6 1-1,744.84 21 8 1021-8 1-1,877.19 21 10 1021-10 1-2,019.77 21 12 1021-12 1-2,167.78 21 15 1021-15 1-2,424.30 21 18 1021-18 1-2,756.18 24 1024 1-6,324.11 24 4 1024-4 1-2,488.52 24 6 1024-6 1-3,069.01 24 8 1024-8 1-3,153.89 24 10 1024-10 1-3,185.74 24 12 1024-12 1-3,255.78 24 15 1024-15 1-3,280.73 24 18 1024-18 1-4,525.96 24 21 1024-21 1-5,311.92 STRAIGHT TEE SHH No Image Available SANITARY TEE HHH 6 126 1-36.64 6 4 126-4 1-34.81 8 128 1-120.53 8 4 128-4 1-67.97 8 6 128-6 1-78.02 10 12710 1-365.62 10 4 12710-4 1-210.14 10 6 12710-6 1-241.90 10 8 12710-8 1-302.92 12 12712 1-548.33 12 4 12712-4 1-293.54 12 6 12712-6 1-311.20 12 8 12712-8 1-377.30 12 10 12712-10 1-404.97 15 12715 1-848.52 15 4 12715-4 1-447.90 15 6 12715-6 1-498.82 15 8 12715-8 1-542.57 15 10 12715-10 1-597.13 15 12 12715-12 1-699.05 18 12718 1-1,492.99 18 4 12718-4 1-1,142.97 18 6 12718-6 1-1,183.12 18 8 12718-8 1-1,237.69 18 10 12718-10 1-1,286.86 18 12 12718-12 1-1,323.05 18 15 12718-15 1-1,411.86 21 12721 1-3,620.27 21 4 12721-4 1-1,577.94 21 6 12721-6 1-1,698.87 21 8 12721-8 1-1,831.28 21 10 12721-10 1-1,973.93 21 12 12721-12 1-2,121.89 21 15 12721-15 1-2,378.40 21 18 12721-18 1-2,709.61 24 12724 1-6,324.11 24 4 12724-4 1-2,488.54 24 6 12724-6 1-3,069.01 24 8 12724-8 1-3,153.89 24 10 12724-10 1-3,185.74 24 12 12724-12 1-3,255.78 24 15 12724-15 1-3,280.69 24 18 12724-18 1-4,525.96 24 21 12724-21 1-5,311.92 * 3 155 30-11.14 * 4 156 18-11.42 * 6 157 4-78.33 * 6 4 157-4 5-59.28 * 8 158 2-184.75 * 8 4 158-4 4 30 77.43 * 8 6 158-6 2-87.27 Solvent Weld Sewer SDR 35 **DENOTES FABRICATED FROM MOLDED COMONENTS lastic Trends, Inc 56400 Mound Road Shelby Twp., MI 48316 586-781-2700 800-232-5690 Fa: 586-781-0888 www.plastictrends.com 35
800-232-5690 Fa: 586-781-0888 VC Solvent Weld Third party tested and listed by NSF, UC and CSA to meet SIZE IN ART BOX CRATE LIST ITEM INCHES NUMBER QTY QTY RICE Sanitary Tee HSH No Image Available 6 177 3-69.35 6 4 177-4 1-66.25 8 178 1-185.02 8 4 178-4 1-74.21 8 6 178-6 1-79.61 TEE CROSS HHHH (Continued) 18 6 17918-6 1-1,530.40 18 8 17918-8 1-1,600.85 18 10 17918-10 1-1,932.69 18 12 17918-12 1-2,042.76 18 15 17918-15 1-2,361.35 18 17918 1-3,162.04 COMBO WYE & 1/8 BEND HHH TEE CROSS HHHH ** 4 1654 6-17.22 ** 6 1656 1 18 87.69 ** 6 4 1656-4 1 28 66.42 ** 8 1658 1 10 211.01 ** 8 4 1658-4 1 16 86.73 ** 8 6 1658-6 1 13 120.83 10 4 16510-4 1 11 277.61 10 6 16510-6 1 9 321.18 10 8 16510-8 1 8 498.47 12 4 16512-4 1 8 333.82 12 6 16512-6 1 7 380.49 12 8 16512-8 1 6 615.25 15 4 16515-4 1-502.53 15 6 16515-6 1-565.95 15 8 16515-8 1-656.88 18 4 16518-4 1-1,207.06 18 6 16518-6 1-1,252.93 18 8 16518-8 1-1,324.62 21 4 16521-4 1-1,811.50 21 6 16521-6 1-1,859.26 21 8 16521-8 1-1,944.58 24 4 16524-4 1-2,851.78 24 6 16524-6 1-3,016.70 24 8 16524-8 1-3,117.43 * 4 179 12-20.93 6 4 1796-4 1-74.42 6 1796 1-90.02 8 4 1798-4 1-135.95 8 6 1798-6 1-143.39 8 1798 1-174.80 10 4 17910-4 1-270.24 10 6 17910-6 1-308.76 10 8 17910-8 1-428.73 10 17910 1-489.26 12 4 17912-4 1-322.53 12 6 17912-6 1-383.90 12 8 17912-8 1-490.39 12 10 17912-10 1-626.91 12 17912 1-697.05 15 4 17915-4 1-680.63 15 6 17915-6 1-790.54 15 8 17915-8 1-827.56 15 10 17915-10 1-850.05 15 12 17915-12 1-909.02 15 17915 1-1,091.73 18 4 17918-4 1-1,371.48 45 WYE HHH * 3 302 25-8.29 * 4 304 16-9.87 * 6 306 4-41.86 * 6 4 316 6-36.48 * 8 308 2-139.89 * 8 4 308-4 4 32 78.66 * 8 6 308-6 3-93.61 10 3010 1-414.00 10 4 3010-4 1-223.78 10 6 3010-6 1-247.92 10 8 3010-8 1-362.20 12 3012 1-663.85 12 4 3012-4 1-320.49 12 6 3012-6 1-362.11 12 8 3012-8 1-463.92 12 10 3012-10 1-562.01 15 3015 1-1,178.31 15 4 3015-4 1-480.63 15 6 3015-6 1-557.13 15 8 3015-8 1-683.46 15 10 3015-10 1-795.51 15 12 3015-12 1-893.48 18 3018 1-1,741.24 18 4 3018-4 1 1,091.60 18 6 3018-6 1-1,106.69 18 8 3018-8 1-1,134.31 18 10 3018-10 1-1,286.86 18 12 3018-12 1-1,323.05 18 15 3018-15 1-1,411.82 21 3021 1-4,605.61 21 4 3021-4 1-1,726.60 21 6 3021-6 1-1,853.71 21 8 3021-8 1-2,095.58 21 10 3021-10 1-2,367.32 21 12 3021-12 1-2,563.37 21 15 3021-15 1-2,974.88 21 18 3021-18 1-3,510.33 24 3024 1-5,652.18 24 4 3024-4 1-2,486.20 24 6 3024-6 1-2,910.87 24 8 3024-8 1-3,149.92 24 10 3024-10 1-3,185.74 24 12 3024-12 1-3,255.78 24 15 3024-15 1-3,280.73 24 18 3024-18 1-4,664.03 24 21 3024-21 1-5,128.18 **DENOTES FABRICATED FROM MOLDED COMONENTS 36 lastic Trends, Inc 56400 Mound Road Shelby Twp., MI 48316 586-781-2700 800-232-5690 Fa: 586-781-0888 www.plastictrends.com
rice List Effective February 11, 2008 VC Solvent Weld Third party tested and listed by NSF, UC and CSA to meet 45 WYE SHH * 4 324 16-9.86 6 326 1-62.57 6 4 326-4 1-38.49 8 328 1-149.70 8 4 328-4 1-76.92 8 6 328-6 1-92.20 10 3210 1-399.23 10 4 3210-4 1-215.79 10 6 3210-6 1-240.35 10 8 3210-8 1-349.26 12 3212 1-640.16 12 4 3212-4 1-320.41 12 6 3212-6 1-351.95 12 8 3212-8 1-447.28 12 10 3212-10 1-541.91 15 3215 1-1,070.87 15 4 3215-4 1-480.63 15 6 3215-6 1-557.13 15 8 3215-8 1-659.02 15 10 3215-10 1-767.07 15 12 3215-12 1-859.33 18 3218 1-1,741.23 18 4 3218-4 1-1,090.25 18 6 3218-6 1 1,106.71 18 8 3218-8 1-1,134.31 18 10 3218-10 1-1,286.86 18 12 3218-12 1-1,323.05 18 15 3218-15 1-1,411.86 21 3221 1-4,559.72 21 4 3221-4 1-1,680.79 21 6 3221-6 1-1,807.79 21 8 3221-8 1-2,029.35 21 10 3221-10 1-2,321.47 21 12 3221-12 1-2,517.48 21 15 3221-15 1-2,929.04 21 18 3221-18 1-3,464.44 24 3224 1-5,652.18 24 4 3224-4 1-2,486.20 24 6 3224-6 1-2,910.89 24 8 3224-8 1-3,149.92 24 10 3224-10 1-3,185.74 24 12 3224-12 1-3,255.78 24 15 3224-15 1-3,280.69 24 18 3224-18 1-4,664.02 24 21 3224-21 1-5,128.17 DOUBLE 45 WYE HHHH 1/4 BEND (90 ) HH LONG TURN 1/4 BEND (90 ) SH LONG TURN * 6 4 366-4 3-57.49 * 6 366-6 2-94.88 8 4 368-4 1-142.89 8 6 368-6 1-174.70 8 368-8 1-212.32 10 4 3610-4 1-310.59 10 6 3610-6 1-336.32 10 8 3610-8 1-446.10 10 3610-10 1-465.87 12 4 3612-4 1-358.94 12 6 3612-6 1-457.44 12 8 3612-8 1-515.13 12 10 3612-10 1-698.76 12 3612-12 1-762.35 15 4 3615-4 1-745.00 15 6 3615-6 1-861.01 15 8 3615-8 1-949.66 15 10 3615-10 1-1,045.12 15 12 3615-12 1-1,160.29 15 3615-15 1-1,229.67 18 4 3618-4 1-1,413.93 18 6 3618-6 1-1,484.32 18 8 3618-8 1-1,622.64 * 3 255 20-5.59 * 4 256 20-7.43 * 6 257 6-35.75 * 8 258 2-121.52 ** 10 2510 1 8 312.77 ** 12 2512 1 6 497.66 15 2515 1-871.75 18 2518 1-1,236.34 21 2521 1-1,903.07 24 2524 1-2,635.62 27 2527 1-3,451.07 * 3 272 20-8.29 * 4 274 20-8.71 * 6 277 6-67.48 * 8 278 2-179.89 ** 10 2710 1 8 312.77 ** 12 2712 1 6 497.46 15 2715 1-757.55 18 2718 1-1,236.34 21 2721 1-1,903.05 24 2724 1-2,635.60 27 2727 1-3,451.06 Solvent Weld Sewer SDR 35 **DENOTES FABRICATED FROM MOLDED COMONENTS lastic Trends, Inc 56400 Mound Road Shelby Twp., MI 48316 586-781-2700 800-232-5690 Fa: 586-781-0888 www.plastictrends.com 37
800-232-5690 Fa: 586-781-0888 VC Solvent Weld Third party tested and listed by NSF, UC and CSA to meet SIZE IN ART BOX CRATE LIST ITEM INCHES NUMBER QTY QTY RICE 1/4 BEND (90 ) HH 1/4 BEND (90 ) SH 1/8 BEND (45 ) HH 1/8 BEND (45 ) SH 1/12 BEND (30 ) HH No Image Available * 3 202 25-4.70 * 4 204 24-6.29 * 6 206 8-19.78 * 8 208 4-82.00 * 10 2010 1 9 287.40 * 12 2012 1 7 412.98 * 6 226 8-40.39 * 8 228 4 30 100.91 * 10 2210 1 10 287.42 * 12 2212 1 7 412.98 * 3 502 60-3.93 * 4 504 30-5.41 * 6 506 12-21.26 * 8 508 4-58.06 * 10 5010 1 12 203.87 * 12 5012 1 9 316.61 15 5015 1-707.57 18 5018 1-819.79 21 5021 1-1,515.16 24 5024 1-2,159.16 27 5027 1-2,464.01 * 3 402 30-6.90 * 4 404 30-7.31 * 6 406 12-27.23 * 8 408 4-71.12 * 10 4010 1 12 196.43 * 12 4012 1 9 316.55 15 4015 1-556.57 18 4018 1-819.80 21 4021 1-1,515.16 24 4024 1-2,159.16 27 4027 1-2,464.01 4 1354.30 1-38.08 6 1356.30 1-48.44 8 1358.30 1-67.18 10 13510.30 1-208.43 12 13512.30 1-303.21 15 13515.30 1-666.75 18 13518.30 1-819.79 21 13521.30 1-1,515.16 24 13524.30 1-2,159.16 27 13527.30 1-2,464.01 1/12 BEND (30 ) SH No Image Available 1/16 BEND (22 1/2 ) HH 1/16 BEND (22 1/2 ) SH 1/32 BEND (11 1/4 ) HH 4 1344.30 1-36.34 6 1346.30 1-37.02 8 1348.30 1-71.42 10 13410.30 1-200.68 12 13412.30 1-296.22 15 13415.30 1-637.97 18 13418.30 1-819.79 21 13421.30 1-1,515.16 24 13424.30 1-2,159.16 27 13427.30 1-2,464.01 * 3 1703 13-5.57 * 4 1704 45-5.93 * 6 1706 10-25.98 * 8 1708 4-67.16 * 10 17010 1 20 208.38 * 12 17012 1 9 303.21 15 17015 1-666.72 18 17018 1-819.79 21 17021 1-1,515.16 24 17024 1-2,159.16 27 17027 1-2,464.01 * 3 1713 13-6.35 * 4 1714 22-7.31 * 6 1716 12-30.31 * 8 1718 4-71.42 * 10 17110 1 24 200.68 * 12 17112 1 9 296.24 15 17115 1-637.97 18 17118 1-819.80 21 17121 1-1,515.16 24 17124 1-2,159.16 27 17127 1-2,464.01 4 1934 1-38.08 6 1936 1-48.44 8 1938 1-67.18 10 19310 1-208.43 12 19312 1-303.21 15 19315 1-666.75 18 19318 1-819.79 21 19321 1-1,515.16 24 19324 1-2,159.16 27 19327 1-2,464.01 **DENOTES FABRICATED FROM MOLDED COMONENTS 38 lastic Trends, Inc 56400 Mound Road Shelby Twp., MI 48316 586-781-2700 800-232-5690 Fa: 586-781-0888 www.plastictrends.com
rice List Effective February 11, 2008 VC Solvent Weld Third party tested and listed by NSF, UC and CSA to meet 1/32 BEND (11 1/4 ) SH COULING HH CONCENTRIC REDUCER BUSHING SH 4 1834 1-36.34 6 1836 1-37.02 8 1838 1-71.42 10 18310 1-200.68 12 18312 1-296.22 15 18315 1-637.97 18 18318 1-819.79 21 18321 1-1,515.16 24 18324 1-2,159.16 27 18327 1-2,464.01 * 3 602 40-3.13 * 4 604 36-3.57 * 6 606 18-13.05 * 8 608 6-40.69 *10 6010 2-115.21 * 12 6012 1-196.19 15 6015 1-343.57 18 6018 1-714.53 21 6021 1-1,246.78 24 6024 1-1,793.00 27 6027 1-3,129.05 * 3 2 1206 15-20.92 * 4 2 1212 8-25.30 * 4 3 1210 25-22.15 * 6 4 1216 15-17.00 * 8 4 1217 8-56.02 * 8 6 1218 9-57.11 * 10 4 1210-4 2-122.80 * 10 6 1210-6 2-177.28 * 10 8 1210-8 2-195.73 * 12 4 1212-4 2-207.30 * 12 6 1212-6 2 27 219.04 * 12 8 1212-8 2-237.65 * 12 10 1212-10 2-298.51 15 4 1215-4 1-284.57 15 6 1215-6 1-315.66 15 8 1215-8 1-423.68 15 10 1215-10 1-472.91 15 12 1215-12 1-501.61 18 4 1218-4 1-474.08 18 6 1218-6 1-500.32 18 8 1218-8 1-520.38 18 10 1218-10 1-539.93 18 12 1218-12 1-552.26 18 15 1218-15 1-555.78 21 4 1221-4 1-611.65 21 6 1221-6 1-626.73 21 8 1221-8 1-640.63 21 10 1221-10 1-666.84 21 12 1221-12 1-691.12 21 15 1221-15 1-737.05 21 18 1221-18 1-830.43 24 4 1224-4 1-1,437.18 CONCENTRIC REDUCER BUSHING SH (Continued) CONCENTRIC REDUCER BUSHING CHAMFER SIGOT ECCENTRIC REDUCER BUSHING SH No Image Available 24 6 1224-6 1-1,454.26 24 8 1224-8 1-1,472.49 24 10 1224-10 1-1,506.91 24 12 1224-12 1-1,526.51 24 15 1224-15 1-1,570.08 24 18 1224-18 1-1,638.91 24 21 1224-21 1-1,926.97 * 8 4 1219 8-67.48 * 8 6 1220 10-70.23 6 4 1306-4 1-28.01 8 4 1308-4 1-56.02 8 6 1308-6 1-57.11 10 4 1310-4 1-122.81 10 6 1310-6 1-177.32 10 8 1310-8 1-195.74 12 4 1312-4 1-207.30 12 6 1312-6 1-219.04 12 8 1312-8 1-237.62 12 10 1312-10 1-298.47 15 4 1315-4 1-284.60 15 6 1315-6 1-315.66 15 8 1315-8 1-423.73 15 10 1315-10 1-472.91 15 12 1315-12 1-501.60 18 4 1318-4 1-474.08 18 6 1318-6 1-500.32 18 8 1318-8 1-520.36 18 10 1318-10 1-539.93 18 12 1318-12 1-552.28 18 15 1318-15 1-555.78 21 4 1321-4 1-611.65 21 6 1321-6 1-626.75 21 8 1321-8 1-640.63 21 10 1321-10 1-666.84 21 12 1321-12 1-691.12 21 15 1321-15 1-737.05 21 18 1321-18 1-830.39 24 4 1324-4 1-1,437.19 24 6 1324-6 1-1,454.24 24 8 1324-8 1-1,472.49 24 10 1324-10 1-1,506.91 24 12 1324-12 1-1,526.52 24 15 1324-15 1-1,570.08 24 18 1324-18 1-1,638.90 24 21 1324-21 1-1,927.02 **DENOTES FABRICATED FROM MOLDED COMONENTS Solvent Weld Sewer SDR 35 lastic Trends, Inc 56400 Mound Road Shelby Twp., MI 48316 586-781-2700 800-232-5690 Fa: 586-781-0888 www.plastictrends.com 39
800-232-5690 Fa: 586-781-0888 VC Solvent Weld Third party tested and listed by NSF, UC and CSA to meet SIZE IN ART BOX CRATE LIST ITEM INCHES NUMBER QTY QTY RICE CONCENTRIC REDUCER COULING HH * 3 2 653 25-18.56 * 4 2 656 20-19.25 * 4 3 654 55-6.75 * 6 4 661 27-17.37 * 8 4 608-4 8 84 71.52 * 8 6 608-6 10-73.45 * 10 4 6010-4 2 36 147.41 * 10 6 6010-6 2-237.06 * 10 8 6010-8 2-211.08 * 12 4 6012-4 2-249.63 * 12 6 6012-6 2-262.94 * 12 8 6012-8 2-343.02 * 12 10 6012-10 2-282.60 15 4 6015-4 1-302.80 15 6 6015-6 1-380.20 15 8 6015-8 1-502.55 15 10 6015-10 1-553.67 15 12 6015-12 1-552.26 18 4 6018-4 1-474.08 18 6 6018-6 1-500.32 18 8 6018-8 1-520.38 18 10 6018-10 1-539.93 18 12 6018-12 1-597.16 18 15 6018-15 1-576.81 21 4 6021-4 1-619.08 21 6 6021-6 1-629.74 21 8 6021-8 1-645.83 21 10 6021-10 1-666.84 21 12 6021-12 1-691.06 21 15 6021-15 1-743.89 21 18 6021-18 1-824.22 24 4 6024-4 1-1,456.64 24 6 6024-6 1-1,467.22 24 8 6024-8 1-1,483.34 24 10 6024-10 1-1,504.27 24 12 6024-12 1-1,528.58 24 15 6024-15 1-1,581.45 24 18 6024-18 1-1,661.82 24 21 6024-21 1-2,017.43 ECCENTRIC REDUCER COULING HH (Continued) CA ADATER CORRUGATED SIGOT 18 4 6118-4 1-474.08 18 6 6118-6 1-500.32 18 8 6118-8 1-520.36 18 10 6118-10 1-539.93 18 12 6118-12 1-597.18 18 15 6118-15 1-576.81 21 4 6121-4 1-619.08 21 6 6121-6 1-629.81 21 8 6121-8 1-645.84 21 10 6121-10 1-666.84 21 12 6121-12 1-691.05 21 15 6121-15 1-743.87 21 18 6121-18 1-824.24 24 4 6124-4 1-1,456.61 24 6 6124-6 1-1,467.24 24 8 6124-8 1-1,483.34 24 10 6124-10 1-1,504.28 24 12 6124-12 1-1,528.61 24 15 6124-15 1-1,581.48 24 18 6124-18 1-1,661.82 24 21 6124-21 1-2,017.40 * 3 1603 100-2.37 * 4 1604 20-3.13 * 6 1606 24-11.44 * 8 1608 6-37.49 * 10 16010 2-123.50 * 12 16012 2-156.38 15 16015 1-269.74 18 16018 1-476.00 21 16021 1-1,044.55 24 16024 1-1,192.19 27 16027 1-1,304.77 * 4 674 24-24.37 ECCENTRIC REDUCER COULING HH No Image Available 6 4 616-4 1-28.01 8 4 618-4 1-71.52 8 6 618-6 1-73.50 10 4 6110-4 1-147.43 10 6 6110-6 1-237.07 10 8 6110-8 1-211.08 12 4 6112-4 1-249.58 12 6 6112-6 1-262.94 12 8 6112-8 1-343.07 12 10 6112-10 1-282.60 15 4 6115-4 1-302.78 15 6 6115-6 1-380.24 15 8 6115-8 1-502.55 15 10 6115-10 1-553.69 15 12 6115-12 1-552.28 ADATER C.I. HUB * 4 704 36-23.79 **DENOTES FABRICATED FROM MOLDED COMONENTS 40 lastic Trends, Inc 56400 Mound Road Shelby Twp., MI 48316 586-781-2700 800-232-5690 Fa: 586-781-0888 www.plastictrends.com
rice List Effective February 11, 2008 VC Solvent Weld Third party tested and listed by NSF, UC and CSA to meet ADATER CLAY HUB * 4 754 15-24.76 2-WAY CLEANOUT HHH * 4 1004 10-20.42 **6 1006 1-126.01 ADATER C.I. SIGOT * 4 804 40-26.60 2-WAY CLEANOUT DWV HHH * 4 1054 10-42.92 Solvent Weld Sewer SDR 35 ADATER CLAY SIGOT * 4 854 15-27.82 ADATER FIBER HUB * 4 875 40-28.51 CLEANOUT TEE HHFIT * 4 1104 15-18.92 DRAIN GRATE * 3 912 50-5.39 * 4 911 30-5.89 * 6 916 15-23.76 * 8 918 3-174.85 COUNTERSUNK LUG * 4 1144 20-9.97 * 6 1146 40-25.66 * 10 11410 2-127.80 * 12 11412 3-191.04 THREADED LUG * 3 1153 75-4.17 * 4 1154 40-4.31 * 6 1156 35-21.70 * 8 1158 8-78.53 * 10 11510 2-127.80 * 12 11512 1-191.04 **DENOTES FABRICATED FROM MOLDED COMONENTS lastic Trends, Inc 56400 Mound Road Shelby Twp., MI 48316 586-781-2700 800-232-5690 Fa: 586-781-0888 www.plastictrends.com 41
800-232-5690 Fa: 586-781-0888 VC Solvent Weld Third party tested and listed by NSF, UC and CSA to meet SIZE IN ART BOX CRATE LIST ITEM INCHES NUMBER QTY QTY RICE DWV BUSHING SEWER SIGOT DWV HUB DWV COULING DWV HUB ADATER DWV SIGOT * 3 1 1/2 1202 15-13.16 * 3 2 1203 15-11.87 * 4 1 1/2 1204 8-12.22 * 4 2 1205 8-12.21 * 4 3 1211 15-27.07 * 4 1213 20-17.34 * 6 4 1214 15-29.92 * 6 1215 12-39.58 * 3 1 1/2 651 15-20.92 * 3 2 652 15-20.92 * 4 3 655 45-6.31 * 4 657 15-9.10 * 6 4 658 10-24.48 * 6 659 12-31.23 **8 6508 1-79.87 10 6510 1-100.12 10 8 6510-8 2-211.08 12 6512 1-137.83 * 4 1208 36-6.81 * 6 1209 20-29.35 8 12008 1-79.87 10 12010 1-98.90 12 12012 1-155.88 FITTING CLEANOUT SIGOTFIT CLOSET FLANGE FLANGE DOWNSOUT ADATER * 3 1503 25-7.31 * 4 1504 20-5.57 * 6 1506 20-34.81 * 8 1508 8-121.58 * 10 15010 2 36 378.52 * 12 15012 2 18 549.84 * 3 1803 30-43.11 * 4 1804 24-43.11 * 233 1903 40-7.11 * 234 1904 35-7.31 * 343 1905 65-10.52 * 344 1906 60-11.59 466 1908 1-31.92 Note: The Last Dimension Is The ipe Dimension. MALE ADATER HUBMIT * 3 1303 40-20.56 * 4 1304 30-21.26 * 6 1306 3-99.85 DOWNSOUT ADATER FLUSH MOUNT DOWNSOUT * 2 3 3 1923 36-5.16 * 2 3 4 1924 22-5.55 * 3 4 4 1926 24-9.89 * 4 6 6 1928 8-31.92 Note: The Last Dimension Is The ipe Dimension. FEMALE ADATER HUBFIT FEMALE ADATER W/ RAISED LUG HUBFIT * 3 1403 18-8.17 * 4 1404 20-7.11 * 6 1406 15-33.59 * 8 1408 8-111.81 * 10 14010 2 36 405.67 * 12 14012 2-588.55 **4 9404 12-14.29 **6 9406 6-60.26 DOWNSOUT ADATER FLUSH MOUNT DOWNSOUT CORRUGATED SIGOT * 2 3 4 1944 32-6.68 * 3 4 4 1946 24-10.59 * 4 6 6 1948 6-41.46 Note: The Last Dimension Is The ipe Dimension. **DENOTES FABRICATED FROM MOLDED COMONENTS 42 lastic Trends, Inc 56400 Mound Road Shelby Twp., MI 48316 586-781-2700 800-232-5690 Fa: 586-781-0888 www.plastictrends.com
rice List Effective February 11, 2008 VC Solvent Weld Third party tested and listed by NSF, UC and CSA to meet SADDLE TEE SOLVENT SKIRT SOLVENT INLET SADDLE WYE SOLVENT SKIRT SOLVENT INLET * 64 2106-4 6-36.27 * 84 2108-4 6-50.47 * 86 2108-6 4-55.95 104 2110-4 3-59.46 106 2110-6 2-67.93 124 2112-4 4-61.11 126 2112-6 2-70.21 154 2115-4 3-65.08 156 2115-6 3-72.77 184 2118-4 4-104.26 186 2118-6 3-111.58 214 2121-4 3-108.71 216 2121-6 2-119.45 246 2124-6 2-123.41 27 4 2127-4 1-117.74 27 6 2127-6 1-125.17 * 64 2306-4 6-37.78 * 84 2308-4 6-51.74 * 86 2308-6 4-54.69 104 2310-4 4-60.71 106 2310-6 2-68.47 124 2312-4 3-62.66 126 2312-6 2-70.86 154 2315-4 3-66.91 156 2315-6 2-74.61 184 2318-4 3-105.89 186 2318-6 2-113.32 214 2321-4 2-113.79 216 2321-6 2-121.20 24 4 2324-4 1-117.74 24 6 2324-6 1-125.17 27 4 2327-4 1-117.74 27 6 2327-6 1-125.17 SKIRT GASKET FOR SADDLE TEE SKIRT GASKET FOR SADDLE WYE STAINLESS CLAM QUICK LOCK IN LINE BACKWATER VALVE HH TERMINAL BACKWATER VALVE HH INTELLICA 4 INLET G5004 6-11.91 6 INLET G5006 4-15.58 4 INLET G5054 6-13.27 6 INLET G5056 4-17.61 6 5128 250-11.91 8 5188 250-16.70 CLAM LENGTH IS 20.5 INCHES & 35.5 INCHES ON 5128 & 5188 RESECTIVELY. **4 0104 1-130.32 **6 0106 1-340.56 8 0108 1-1,167.74 10 0110 1-1,497.39 12 0112 1-1,575.20 15 0115 1-2,777.74 18 0118 1-4,043.37 21 0121 1-9,622.18 24 0124 1-11,467.26 27 0127 1-13,904.78 4 0204 1-147.91 6 0206 1-172.93 8 0208 1-345.70 10 0210 1-393.70 12 0212 1-437.67 15 0215 1-420.68 18 0218 1-623.04 24 0224 1-1,196.74 *4 1614-SN 14-60.00 *6 1616-SN 1-75.00 Solvent Weld Sewer SDR 35 SADDLE TEE W/ LOCATING RING * 64 4106-4 6-48.12 * 84 4108-4 6-77.00 * 86 4108-6 4-88.04 INTELLIDISC *4 1624-SN 20-50.00 *6 1626-SN 1-62.50 SADDLE WYE W/ LOCATING RING * 64 4306-4 6-52.47 * 84 4308-4 6-85.28 * 86 4308-6 4-93.90 **DENOTES FABRICATED FROM MOLDED COMONENTS lastic Trends, Inc 56400 Mound Road Shelby Twp., MI 48316 586-781-2700 800-232-5690 Fa: 586-781-0888 www.plastictrends.com 43
800-232-5690 Fa: 586-781-0888 VC Solvent Weld Third party tested and listed by NSF, UC and CSA to meet SIZE IN ART BOX CRATE LIST ITEM INCHES NUMBER QTY QTY RICE Injection molded erfect Fit DWV Fittings from lastic Trends eliminate typical problems associated with installing other DWV systems due to inconsistent, inaccurate, or non-certified fittings. lease refer to the net section pages 45-56 for more information, pricing and available configurations in the erfect Fit DWV product line. **DENOTES FABRICATED FROM MOLDED COMONENTS 44 lastic Trends, Inc 56400 Mound Road Shelby Twp., MI 48316 586-781-2700 800-232-5690 Fa: 586-781-0888 www.plastictrends.com