Tuthill Pump Group 00 South Pulaski Road Alsip, IL 6080 USA Phone: 708.89.00 Fax: 708.88.0869 SERIES EGIEERIG DATA PAK ontents: Page : Page : Pump Performance Data /400/400 Pump Performance Data (40, 00, 00 & 000 SSU) /400/400 Pump Performance Data (000, 0000 & 000 SSU) Pumps Page 4: General Model Descriptions Page : Pump Mounting Dimensions (F6F with pump options) Page 6: Pump Mounting Dimensions (FA6FA with pump options) Page 7: Pump Mounting Dimensions (E6E with pump options) Page 8: Pump Mounting Dimensions (B6B with pump options) Page 9: Pump Mounting Dimensions (KB6KB with pump options) Page 0: Pump Mounting Dimensions (G6G with pump options) Page : Pump Mounting Dimensions (AS, 4S & 6AS with pump options) Page : Pump Mounting Dimensions (SA6SA with pump options) Page : Pump Model umber System (Includes port options) Page 4: Temperature Limits Page : Pump Materials of onstruction Page 6: PSH Data Page 7: Dimensions for F4F lose oupled to Three Phase Motors Page 8: Dimensions for Adapter Mounting F6F pumps to EMA Frame Motors Page 9: Dimensions for Adapter Mounting B6B & 446 & 446 pumps to EMA Frame Motors Page 0: Dimensions for Adapter Mounting KB6KB pumps to EMA Frame Motors Page : Dimensions for Series Mounting Feet (8, 8, K8 & 8) 400/400 Pumps Page : Page 4: Page : Page 6: Page 7: Page 8: Page 9: 4000/ ross Reference List Pump Mounting Dimensions (446 with pump options) Pump Mounting Dimensions (446 & 446 with pump options) Pump Mounting Dimensions (446 with pump options) 400/400 Pump Model umber System (Includes port options) Temperature Limits 400/400 Materials of onstruction Pumps Page 0: Page : Page : Page : Page 4: Page : Page 6: Page 7: Pump/EMA Motor Mounting Dimensions (09 size with options) Pump/IE Motor Mounting Dimensions (09 size with options) Pump/EMA Motor Mounting Dimensions (0, 00 & 00 size with options) Pump/IE Motor Mounting Dimensions (0, 00 & 00 size with options) Series Model umber System Temperature Limits Series Materials of onstruction PSH Data v.0 (0.6.) Page of 7 www.tuthillpump.com
0 PSI 0 PSI 00 PSI SIZE RPM 4 00 900 00 800 00 900 00 800 00 900 00 800 00 900 00 800 40 SSU /400/400 Pump Performance Data 900 6 00 8 4 4 4 8 4 4 4.8.4.6. 7.6 6.0 4.4 4.0. 4 4 0.9 7.4 4 7 4 7 7 8 8 8 8 8 4 4 4 8 4 4 4 0.4 8 0. 8 8 4 4 4 4 4 7 8 4 4 4 4 4 7 7 7 7 7 8 8 8 8 4 4 8 8 4 8 4 4 4 4 4 4 4 4 7 8 4 4 4 4 7 7.9 7 7 7 8 8 8 8 8 8 8 4 4 4 4 4 4 4 4 4 4 4 4 4 4 7 7 7. 8.0 7 7 7 7 00 900 00 800 00 800 0.4..9.9.0 7. 0.0. 6.0 8.. 6..0 4.0.6.0 9.0. 4.8 6.. 4. 6.0 9.0 9.0.0 0 PSI 0 PSI. 4.0.4 8.0..8 8..0 00 PSI 0.8. 4. 7.0. 8.0 0..6 4.6 6. 9.. 9..0 9. 8.0 7.0 6.0.0 8. 0.0 6.0 8. 4.0 4.. 7.8.8.0 7.0 6.0 6.0.0 0.0.0 4.0.0 7.0 6.0 8..0 8.0 4..0 0.0 7.0.0 4.0 6.0 6.7 6.0 60.0 0.0 0 6.7 6.0 47. 7.0 0...7.7 0.0 40.0 6.0.0....0 0.4.4.9.9 4.0 4.0 6.0 49.0 0 84.0.4.9.8 8.0 9.0 40.0.0 40.0 4.0 8.0 00 SSU 00 SSU 000 SSU..7.7 6.0 7.0 8. 0.0 8.. 8.0 0 0 PSI..0 7.0.0 0.0 0.0 7.0 4.0 70.0.7 6.7 0 0.4..8.7 0.0 0.8 4.0 4.0 4.0 6.0 84.0 0 PSI 0 PSI 0.4..8.7.4 4.0. 8.4.9 8.. 00 PSI.. 4. 7..7 8..0.6 4.8 6.6 9.8. 9.4. 0 PSI 0 PSI.6 4.6 6.4 9..0 9.4.0 00 PSI.4.8 6.0 9.0.8 8..8 8.0 6..0 8.7 8. 7.0.8 7.8. 7.6 6. 8.7 4.0.7 0.0 4.9 6. 6.0.0 7.4 9. 0.0 40.0 9.0 9. 9. 0. 0.8 4.7.9 8.4 4..6 8.0 4.0 7. 6. 0. 0.8 4.7 0.0 0. 4.0 6.0 60.0 4.0 0 6.7 6.7 6.0. 4.0.0..7.6.0 40.0 4.0 8.0 8.0 0 PSI 0.4 0.4 0.0 4. 7.0 6.0 9.0 4.0 4.0 4.0.0 47.0 7.0 0.4.8 4. 4. 6.0 84.0 0.4.4.9.7 4.0 4..0 0.4.8.7.0 40. 4.0 8.0 8.0 0 PSI 8.... 6. 9.7.0.0 6.0 6.0 7 6.0.0 47.0 0 76.0 0 0 v.0 (0.6.) Page of 7 www.tuthillpump.com
0 PSI 0.9 4..6 7.6 4. 6. 4.. 7.0 7.0 0.0 8.0 /400/400 Pump Performance Data 900 6 00 4 4 7 7 4 7 4 4 7 4 7 7 7 7 7 4 4 7 4 4 7 4 7 4 4 7 4 4 4 SIZE RPM 4 00 900 00 800 00 900 00 800 00 900 00 800 00 900 00 800 00 900 00 800 00 800.6 4.9 6. 9.7..0 9.4. 9.4.4.9 8.7.6 8.7 8. 7. 6. 8.7 4.9 6. 8. 4.9 7.4 7.4 6.0 8.0 7.0 0. 0. 0.0 0.8 4.7 6.7 6.7 6.0 4. 4. 6.0 84.0 0 PSI 0 4.0 4.. 8.0 000 SSU 0000 SSU 000 SSU 0 PSI.6 4.8 6.4 9.6 0.8 4.7 0 00 PSI. 4. 6. 9. 0.0 40.0. 40.8 4. 8.0 0 0 0.6 4.9. 9.0 6. 8. 0. 8.8.6 0 PSI 0 PSI.6.0.9.0.0.0.0 8.9 6. 8.0 6.0 7.8.0.8 0. 0.0 0.8 0.8 0.6 4.0 4.. 0 PSI 0 PSI.6 4.8.8 4.0 0. 0 00 PSI. 4.6. 40. 4.7 0 PSI.0 4. 7..0 0.. 4.8 8.0 4.0.8... 6. 6. 6.0 0. 0. 0.0 00 PSI 0 PSI v.0 (0.6.) Page of 7 www.tuthillpump.com
General Model Descriptions F6F (Shaft Lip Seal): Model F pumps were specifically developed for flange mounting applications and for close coupling to Tuthill s special motors to provide extremely compact closecoupled combinations (See Page 7). Model F pumps are supplied with a single springloaded lip seal, and can handle inlet pressures to PSI. Designed for direct drive service, these pumps incorporate precision bronze bearings and may be also supplied with a shaft modification for driving the pump directly from existing shafts without couplings. The F pumps have a maximum differential capability of 00 PSI. FA6FA (Seal less Design): Model FA pumps are similar in construction to the F pumps. They are supplied without a seal for use on OEM builtin applications. The FA pumps have a maximum differential capability of 00 PSI. E6E (Shaft Lip Seal With Foot Mount): For directdrive service, the E pumps have been designed to provide the maximum in compactness. E pumps have a springloaded lip seal and precision bronze bearings similar to the F models. E pumps have an outboard ball bearing and were specifically developed for use with belt drives or similar applications were a side load is applied to the pump shaft. Both E and E have an integral mounting foot for a variety of mounting arrangements. Both models can handle inlet pressure to PSI and maximum differential pressures to 00 PSI. B6B & 446 & 446 (Shaft Mechanical Seal): Model B/400 pumps are designed for flange or foot mounting applications. They may also be adapter mounted to face electric motors (See Page 9). B/400 pumps are provided with a mechanical seal capable of handling inlet pressures to 0 PSI at a standard 7RPM motor speed with a maximum discharge pressure of 00 PSI. The maximum differential for this pump is 0 PSI. For side load applications an outboard ball bearing feature is available as well. KB6KB (Shaft Mechanical Seal): Model KB pumps are designed for differential pressures to 0 PSI and incorporate a double ball bearing with an inboard heavyduty roller bearing. They may also be adapter mounted to face electric motors (See Page 0). KB pumps are supplied with a mechanical seal capable of handling inlet pressures to 0 PSI at a standard 7RPM motor speed with a maximum discharge pressure of 00 PSI. G6G & 446 & 446 (Packing Seal With Foot Mount): Model G/400 pumps have spring loaded PTFE Vrings (Graphite Impregnated) as the shaft seal. They are capable of handling inlet pressures to PSI and differential pressures to 00 PSI. AS, 4S, 6AS & SA6SA (Stripped Pumps): Tuthill s Series pumps are available in stripped form for use in volume OEM applications where a pump is to be built directly into a piece of equipment. The capacity data on pages and may be used as a guide, although the ultimate capacities obtained will depend not only on the pumping element but the mountings provided by the customer and the tolerances the customer maintains. The stripped pumps are similar to the FA pumps but without a mounting bracket. This, of course, also eliminates the seal and bearing. The customer must provide these in building these models into the equipment. These pumps are also available in a further stripped form. The SA pumps are only supplied with the pumping elements; cover, idler gear, and rotor. The housing, bearing, bracket, and seal are not furnished. v.0 (0.6.) Page 4 of 7 www.tuthillpump.com
T PIPE TAP F6F Pump Mounting Dimensions P Z L O X ØU ØB B.. ØS A M WOODRUFF KEYWAY K G OVERALL LEGTH WITH RELIEF VALVE FEATURE R OVERALL LEGTH WITH REVERSIG FEATURE L AL AO A L BL BO B WOODRUFF KEYWAY K.67 MODIFIATIO "A" BALL BEARIG FEATURE WITH PRESSURE RELIEF VALVE FEATURE WITH REVERSIG FEATURE Model A B R G K L M O P S F / 7/8 /8 / 6 7/ #406 /8 /8 /8 7/ /4 F / /8 6 7/ 6 7/8 7 7/ #606 4 /6 /6 / 7/6 6 /8 /4 4F / /8 7 7/ 7 9/6 8 7/ #606 4 9/ / 7/6 6 / /4 F 7 6 /8 9 /6 /8 0 /4 #808 /4 4 /6 /8 /8 7 / /4 6F 7 6 /8 9 / /8 0 /4 #808 6 4 /6 /8 /8 8 /8 /4 Model T U X Z AL A AO BL B BO F PT /8 /6 /8 /6 /6 /6 6 /6 9/ / F /4" PT /4 4 7/8 4 /8 7/6 / /6 6 /6 / 7/6 4F /" PT /4 4 /8 /4 7/ / /6 6 9/ / 7/6 F /" PT 4 /4 4 /4 7/8 7/8 6 7/8 9/ 4 / 6F PT 4 /4 4 /4 4 / 7/8 7/8 7 /8 9/ 4 / v.0 (0.6.) Page of 7 www.tuthillpump.com
FA6FA Pump Mounting Dimensions P T PIPE TAP Z L O X ØU ØB B.. ØS A M WOODRUFF KEYWAY K G OVERALL LEGTH WITH RELIEF VALVE FEATURE R OVERALL LEGTH WITH REVERSIG FEATURE L AL AO A L BL BO B WOODRUFF KEYWAY K.67 MODIFIATIO "A" BALL BEARIG FEATURE WITH PRESSURE RELIEF VALVE FEATURE WITH REVERSIG FEATURE Model A B R G K L M O P S FA / 7/8 /8 / 6 7/ #406 /8 /8 /8 7/ /4 FA / /8 6 7/ 6 7/8 7 7/ #606 4 /6 /6 9/ 7/6 6 /8 /4 4FA / /8 7 7/ 7 9/6 8 7/ #606 4 9/ 9/ 7/6 6 / /4 FA 7 6 /8 9 /6 /8 0 /4 #808 /4 4 /6 /4 /8 7 / /4 6FA 7 6 /8 9 / /8 0 /4 #808 6 4 /6 /4 /8 8 /8 /4 Model T U X Z AL A AO BL B BO FA PT /8 /6 /8 /6 9/6 /6 6 /6 9/ / FA /4" PT /4 4 7/8 4 /8 7/6 7/ /6 6 /6 / 7/6 4FA /" PT /4 4 /8 /4 7/ 7/ /6 6 9/ / 7/6 FA /" PT 4 /4 4 /4 /4 7/8 6 7/8 9/ 4 / 6FA PT 4 /4 4 /4 4 / /4 7/8 7 /8 9/ 4 / v.0 (0.6.) Page 6 of 7 www.tuthillpump.com
E6E Pump Mounting Dimensions T PIPE TAP P Z L X ØU D WOODRUFF KEYWAY K H E E M F L BL B WOODRUFF KEYWAY K G OVERALL LEGTH WITH RELIEF VALVE FEATURE R OVERALL LEGTH WITH REVERSIG FEATURE BALL BEARIG FEATURE WITH PRESSURE RELIEF VALVE FEATURE WITH REVERSIG FEATURE Model R G D E F H K L M P E /8 / 6 7/ /4 9/ / #406 /8 9/ /8 7/ E 6 7/ 6 7/8 7 7/ 7/8 / SLOT / #606 4 /6 SLOT / 6 /8 4E 7 7/ 7 9/6 8 7/ 7/8 / SLOT / #606 4 9/ SLOT / 6 / E 0 /6 /4 /8 4 /4 / SLOT / #808 6 7/8 SLOT / 7 / 6E 0 /8 /4 7/8 4 /4 / SLOT / #808 7 /8 SLOT / 8 /8 Model T U X Z BL B E PT /8 /6 /8 6 /6 9/ E /4" PT /4 4 7/8 4 /8 6 /6 / 4E /" PT /4 4 /8 /4 6 9/ / E /" PT 4 /4 6 7/8 9/ 6E PT 4 /4 4 /4 7 /8 9/ v.0 (0.6.) Page 7 of 7 www.tuthillpump.com
B6B Pump Mounting Dimensions P T PIPE TAP Z L O X ØU ØB B.. ØS D WOODRUFF KEYWAY K E E H M G OVERALL LEGTH WITH RELIEF VALVE FEATURE F R OVERALL LEGTH WITH REVERSIG FEATURE L BL BO B WOODRUFF KEYWAY K BALL BEARIG FEATURE WITH PRESSURE RELIEF VALVE FEATURE WITH REVERSIG FEATURE Model B R G D E F H K L M B 7 9/6 7/8 8 / 8 / /4 9/ / #406 6 /6 9/ 7/ B 8 7/ /8 8 7/8 9 7/ 7/8 / SLOT / #606 6 /6 SLOT / 4B 9 7/ /8 9 9/6 0 7/ 7/8 / SLOT / #606 6 9/ SLOT / B /6 6 /8 4 / /8 4 /4 / SLOT / #808 8 /8 SLOT / 6B /8 6 /8 /8 4 /4 / SLOT / #808 8 7/8 SLOT / Model O P S T U X Z BL B BO B /6 7/ /4 PT /8 /6 /8 6 /6 7/ /6 B 7/6 6 /8 /4 /4" PT /4 4 7/8 4 /8 6 /6 / 7/6 4B 7/6 6 / /4 /" PT /4 4 /8 /4 6 9/ / 7/6 B 6 /4 7 / /4 /" PT 4 /4 8 /8 9/6 6 /4 6B 6 /4 8 /8 /4 PT 4 /4 4 /4 8 7/8 9/6 6 /4 v.0 (0.6.) Page 8 of 7 www.tuthillpump.com
KB6KB Pump Mounting Dimensions T PIPE TAP P Z L O X ØU ØS D WODDRUFF KEYWAY K E E H M F G OVERALL LEGTH WITH RELIEF VALVE FEATURE R OVERALL LEGTH WITH REVERSIG FEATURE WITH PRESSURE RELIEF VALVE FEATURE WITH REVERSIG FEATURE Model R G D E F H K L M O KB 7 9/6 8 /6 8 / 7/8 / SLOT / #406 /6 SLOT /8 4 /6 KB 8 7/ 8 7/8 9 7/ 7/8 / SLOT / #606 6 / SLOT /8 /8 4KB 9 7/ 9 9/6 0 7/ 7/8 / SLOT / #606 6 /6 SLOT /8 /8 KB /6 4 / /8 4 /4 / SLOT / #808 8 /6 SLOT 6 /6 6KB /8 /8 4 /4 / SLOT / #808 8 9/6 SLOT 6 /6 Model P S T U X Z KB 7/8 /4 /" PT /8 /4 /4 KB 7/8 /4 /4" PT /4 /8 / 4KB 6 /4 PT /4 /8 /4 KB 7 /8 /4 /4" PT 4 /6 4 /4 6KB 8 /8 /4 PT 4 /4 4 /4 v.0 (0.6.) Page 9 of 7 www.tuthillpump.com
G6G Pump Mounting Dimensions T PIPE TAP P Z L X ØU D WOODRUFF KEYWAY K H E E M F G OVERALL LEGTH WITH RELIEF VALVE FEATURE R OVERALL LEGTH WITH REVERSIG FEATURE WITH PRESSURE RELIEF VALVE FEATURE WITH REVERSIG FEATURE Model R G D E F H K L M P G 7 9/6 8 / 8 / /4 9/ / #606 6 /6 9/ /6 7/ G 8 7/ 8 7/8 9 7/ 7/8 / SLOT / #606 6 /6 SLOT /6 6 /8 4G 9 7/ 9 9/6 0 7/ 7/8 / SLOT / #606 6 9/ SLOT /6 6 / G /6 4 / /8 4 /4 /6 /8 / #808 8 /8 /6 / 7 / 6G /8 /8 4 /4 /6 /8 / #808 8 7/8 7/6 / 8 /8 Model T U X Z G PT /8 /6 /8 G /4" PT /4 4 7/8 4 /8 4G /" PT /4 4 /8 /4 G /" PT 4 /4 6G PT 4 /4 4 /4 v.0 (0.6.) Page 0 of 7 www.tuthillpump.com
S6S Pump Mounting Dimensions P T PIPE TAP Q R PU MP TU THILL OMP AY ØU WOODRUFF KEYWAY K OPTIOAL REVERSIG FEATURE ØB Model B R K P Q T U AS 7/8 6 /8 6 / #04 4 /8 / / /8 PT S 7/8 7 9/6 8 /6 #406 7/6 4 /8 /8 / PT S /8 8 / 8 7/8 #606 /6 6 /4 /4 PT 4S /8 9 /4 9 9/6 #606 /6 6 /4 PT S 6 /8 7/8 4 / #808 7 /4 7 / /8 /4" PT 6AS 6 /8 /8 #808 7 /4 7 / /8 PT.499.498.64.6.749.748.749.748.999.998.999.998 v.0 (0.6.) Page of 7 www.tuthillpump.com
SA6SA Pump Mounting Dimensions P ØB Q R TU THILL PU MP OM AY P ØU WOODRUFF KEYWAY K OPTIOAL REVERSIG FEATURE Q' Model B R K P Q Q U SA 7/8 6 /8 6 / #04 4 / / /6 /8 SA 7/8 7 9/6 8 /6 #406 9/6 4 /8 /4 /6 SA /8 8 / 8 7/8 #606 /6 6 /4 /6 4SA /8 9 /4 9 9/6 #606 /6 6 7/8 /6 SA 6 /8 7/8 4 / #808 7 7/6 7 / /6 4 / 6SA 6 /8 /8 #808 7 7/6 7 / /6 4 /.499.498.64.6.749.748.749.748.999.998.999.998 v.0 (0.6.) Page of 7 www.tuthillpump.com
Pump Model umber System Size 4 6 Reversing Feature R Model F FA E E B B G KB* S/SA Pump Options V Valve Outboard Ball Bearing U over Rotated 80 Rotation lockwise Rotation ounterclockwise Rotation Or Suction Port Location (On Pumps With reversing Feature) RH Right Hand Suction LH Left Hand Suction SAE Port Option* *See Series Port Sizes below. *KB pumps not included Modifications A Tang Shaft eoprene Seal 6 PTFE Seal 7 Viton Seal 7890 Abrasion Resistant Seal 8 EPR Seal o Flat/Keyway in Shaft arbon Bushing Option Z Pump Port Sizes Model umber Location Port Pump Size Stamped on a metal tag on the cover Style Size 4 6 PT BSPP BSPT SAE STD. /4" STD. /" STD. STD. STD. OPT. /4" OPT. /" OPT. OPT. OPT. /4" OPT. 4 OPT. 6 OPT. OPT. 0 OPT. OPT. 4 OPT. OPT. OPT. TUTHILL F *ote: ontact factory for nonstd. ports on KB style pumps. v.0 (0.6.) Page of 7 www.tuthillpump.com
eoprene Bronze Bushings arbon Bushings Viton Ethylene Propylene (EPR) PTFE 600 F Pump Temperature Limits 0 F 00 F 40 F 400 F 0 F 00 F 0 F 00 F 0 F 00 F 0 F 0 F 0 F 00 F otes:. A pump s performance is dependent on more than just the temperature ranges of the component materials. v.0 (0.6.) Page 4 of 7 www.tuthillpump.com
Pump Materials of onstruction Part ame Material Standard omments Availability Housing ast Iron ASTM A48 96a lasses 0,, or 40 Std. Bracket ast Iron ASTM A48 96a lasses 0,, or 40 Std. Bracket Bushing Bronze SAE 660 Std. arbon arbon Graphite Resin Opt. over ast Iron ASTM A48 96a lasses 0,, or 40 Std. Rotor Steel 7 or 4 Steel Forging Std. Idler P/M Steel F008P Std. Steel 7 Opt.** Idler Pin Steel 7 Heat Treated Std. Idler Bushing Bronze SAE 660 Std.* arbon arbon Graphite Resin Opt.** Seal Gland ast Iron ASTM A48 96a lasses 0,, or 40 DU Bushing Only on B models Std. Packing Gland ast Iron ASTM A48 96a Bronze SAE 660 Only on G models Std. ORings Buna Viton eoprene EPR PTFE /A STD Opt. Opt. Opt. * Bronze idler bushing standard on 6 size pumps ( size available with steel idler gear). ** Steel Idler & arbon Idler Bushing are standard on KB pumps v.0 (0.6.) Page of 7 www.tuthillpump.com
Pump PSH Data PSH Required for Tuthill Pumps 0000 SSU PUMP SERIES SPEED RPM 00 600 900 00 00 800 FT...0.8.8. 6.6 FT..4.4.6. 7. 9.4 4 FT..6.7 4.4 6. 9.. FT..8.0. 8..9 6. 6 FT..0. 6.0 9.9 4.8 0. otes:. For liquid viscosity up to 000 SSU.. PSHA (et Positive Suction Head Available) must be greater than the PSHR (et Positive Suction Head Required) value provided in the table.. Values above are for feet of liquid with a Specific Gravity of.0. Viscosity orrection Factor Viscosity (SSU) 00 000 0000 000 orrection Factor..7.0.7 v.0 (0.6.) Page 6 of 7 www.tuthillpump.com
Dimensions for F4F lose oupled to Three Phase Motors 8 "B" "" "P" "J" "S" "G" "H" "S" "F" "R" "E" 8804 8 HIAGO U.S.A. 4 7 8 4 8 7 8 4 (6Z) 4 SLOTS.4 WIDE (OTHERS) Ø.4 MODEL # 880 /4 880 880 880 8806 8807 8849 8808 8809 / "" "A" DESRIPTIO / "D" "" ROTATIO ARROW PH/0//60/90/80/0/440 VOLT, 080/440 VOLT, 4/7 RPM, TEF, 6Z FRAME PH/0//60/90/80/0/440 VOLT, 080/440 VOLT, 90/ RPM, TEF, 6Z FRAME PH/0//60/90/80/0/440 VOLT, 080/440 VOLT, 4/7 RPM, TEF, 6Z FRAME PH/0//60/90/80/0/440 VOLT, 080/440 VOLT, 90/ RPM, TEF, 84Z FRAME PH/0//60/90/80/0/440 VOLT, 080/440 VOLT, 4/7 RPM, TEF, 84Z FRAME PH/0//60/90/80/0/440 VOLT, 080/440 VOLT, 90/ RPM, TEF, 84Z FRAME PH/0//60/90/80/0/440 VOLT, 080/440 VOLT, 4/7 RPM, TEF, 84Z FRAME PH/0//60/90/80/0/440 VOLT, 080/440 VOLT, 90/ RPM, TEF, Z FRAME PH/0//60/90/80/0/440 VOLT, 080/440 VOLT, 4/7 RPM, TEF, Z FRAME PH/0//60/90/80/0/440 VOLT, 080/440 VOLT, 90/ RPM, TEF, Z FRAME "A".8 /4.8.8.8.8.9.8 6.68 4.88.8 4.88 6.0 4. "B" "" 4.0 4.0 4.0 4. 4. 4. 4..0.0.0.7.7.7.7.7.7.0 "D" 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 "E".0.0.0 4.0 4.0 4.0 4.0. "F" 6.8 6.8 6.8 8.44 8.44 8.44 8.44 9.6 7.6 7.6 8.0 8.0 6.0. 9.6 8.0 8.00. 0.0 0.6 "G" "H" 7.6 8.0 8.0 8.0 6.6 6.6 6.6 7.88 7.88 7.88 7.88 7.88 7.88 9.6 "Q" PIPE TAP "J"....97.97.97 6.00.97 LEAD HOLE Ø "M" "K".44.44.44.7.7.7.7 4. "L"... 4. 4. 4. 4. 4.7.97 4. 4.7 7.46 4. 4.7 "M".88.88.88.09.09.09.09.06.06.09 WT. 6 8 0 7 7 7 F "L" "K" MODEL # "" F 4F "P" "R" 7 6 4 "K" A B D "L" "S" 6 9 6 ASSEMBLY STYLES "Q"PT U P MP 0. LL THI TU v.0 (0.6.) Page 7 of 7 www.tuthillpump.com
Dimensions for Adapter Mounting F6F pumps to EMA Frame Motors LP Y W Z T PIPE TAP X D B A Pump Model F F 4F F 6F Motor Frame Size LP Adapter Adapter Kit 6 /6 F F4 4T, 4T /6 F F4A 8T, 84T 6 /8 F8 F48 6 6 /4 F F4 4T, 4T 6 /4 F F4A 8T, 84T 6 /6 F8 F48 T, T 7 /6 F F4 8T, 84T 6 7/8 F8 F48 T, T 7 /8 F F4 4T, 6T 8 /6 F4 F44 84T, 86T 9 /4 F84 F484 4T, 6T 9 /4 F4 F44 Pump Model T W X Y Y DIM WITH RELIEF VALVE F PT /6 / 9/ /8 F /4" PT /8 4 7/8 / 4 / 4 /8 4F /" PT / 4 /8 4 / / /4 F /" PT /8 /6 6 /6 4 /4 6F PT /8 4 /4 6 /8 7 /8 4 /4 Z Motor Frame A B D 6 /4 7/6 / 4T /4 4 /4 / 4T /4 /4 / 8T /4 4 / /4 4 / 84T /4 / /4 4 / T / / 4 /4 /4 T / 7 4 /4 /4 4T 4 /4 8 /4 6 /4 6T 4 /4 0 6 /4 84T 4 /4 9 / / 7 86T 4 /4 / 7 4T /4 0 / 6 /4 8 6T /4 6 /4 8 v.0 (0.6.) Page 8 of 7 www.tuthillpump.com
Dimensions for Adapter Mounting B6B & 446 & 446 pumps to EMA Frame Motors LP Y W Z T PIPE TAP X D B A Pump Model B / 4 /4 B / 4 / 4 4B / 44 / 44 B / 4 / 4 6B / 46 / 46 Motor Frame Size LP Adapter Adapter Kit 6 7 /6 B6 B46 4T, 4T 7 /6 B6 B44 8T, 84T 8 9/6 B8 B48 6 8 /6 B6 B46 4T, 4T 8 /6 B6 B44 8T, 84T 8 /6 B8 B48 T, T 9 /6 B B4 8T, 84T 9 /4 B8 B48 T, T 0 / B B4 4T, 6T /6 B4 B44 84T, 86T /6 B84 B484 4T, 6T /6 B4 B44 Pump Model T W X Y Y DIM WITH RELIEF VALVE B / 4 / 4 PT /6 / 9/ /8 B / 4 / 4 /4" PT /8 4 7/8 / 4 / 4 /8 4B / 44 / 44 /" PT / 4 /8 4 / / /4 B / 4 / 4 /" PT /8 /6 6 /6 4 /4 6B / 46 / 46 PT /8 4 /4 6 /8 7 /8 4 /4 Z Motor Frame A B D 6 /4 7/6 / 4T /4 4 /4 / 4T /4 /4 / 8T /4 4 / /4 4 / 84T /4 / /4 4 / T / / 4 /4 /4 T / 7 4 /4 /4 4T 4 /4 8 /4 6 /4 6T 4 /4 0 6 /4 84T 4 /4 9 / / 7 86T 4 /4 / 7 4T /4 0 / 6 /4 8 6T /4 6 /4 8 v.0 (0.6.) Page 9 of 7 www.tuthillpump.com
Dimensions for Adapter Mounting KB6KB pumps to EMA Frame Motors LP Y W Z T PIPE TAP X D B A Pump Model KB KB 4KB KB 6KB Motor Frame Size LP Adapter Adapter Kit 6 7 /6 KB6 KB46 4T, 4T 7 /6 KB6 KB46 8T, 84T 8 7/6 KB8 KB48 6 8 /8 KB6 KB46 4T, 4T 8 /8 KB6 KB46 8T, 84T 9 /8 KB8 KB48 T, T 0 /4 KB KB4 8T, 84T 0 /6 KB8 KB48 T, T /6 KB KB4 4T, 6T 7/8 KB4 KB44 84T, 86T 7/8 KB84 KB484 4T, 6T /4 KB4 KB44 Pump Model T W X Y Y DIM WITH RELIEF VALVE KB /" PT 7/8 /4 /8 / /4 KB /4" PT 7/8 / 9/ 9/ / 4KB PT /6 /4 9/ 4 9/ /4 KB /4" PT / 4 /4 /6 6 /6 4 /4 6KB PT /4 4 /4 9/6 6 /6 4 /4 Z Motor Frame A B D 6 /4 7/6 / 4T /4 4 /4 / 4T /4 /4 / 8T /4 4 / /4 4 / 84T /4 / /4 4 / T / / 4 /4 /4 T / 7 4 /4 /4 4T 4 /4 8 /4 6 /4 6T 4 /4 0 6 /4 84T 4 /4 9 / / 7 86T 4 /4 / 7 4T /4 0 / 6 /4 8 6T /4 6 /4 8 v.0 (0.6.) Page 0 of 7 www.tuthillpump.com
Dimensions for Series Mounting Feet (8, 8, K8 & 8) 7 6 8 (FOR SIZE PUMPS) (4) 4 0 UB TAP THRU ( 8 ) 9 ( 8 ) 4 4 ( ) 8 (FOR & 4 SIZE PUMPS) K8 (FOR, & 4KB SIZE PUMPS OLY) (4) 6 8 UB TAP (8) Ø DRILL THRU 7 8 7 8 ( 8 ) ( 8 ) ( ) TYP. TYP. ( 8 ) ( 8 ) ( ) TYP. TYP. 8 (FOR & 6 SIZE PUMPS) 8 X Ø DRILL THRU 4 4 ( 8 ) ( 8 ) ( 9 ) 6 TYP. TYP. TYP. Ø 9 64 TYP. 8 TYP. 6 TYP. v.0 (0.6.) Page of 7 www.tuthillpump.com
4000/ ross Reference List 40 Pumps G Pump 40 Series Additional Features 4 G arbon bracket bushing Vs. bronze Steel idler gear Vs. powdered metal arbon Idler bushing Vs. none 4 G arbon bracket bushing Vs. bronze Steel idler gear Vs. powdered metal arbon Idler bushing Vs. bronze 44 4G Same as above 4 G Same as above 46 6G Same as above Options: V is available on both pumps. ote: The Tuthill reversing feature is not available on 4000 pumps. 40 Pumps G Pump 40 Series Additional Features 4 G eramic bracket bushing Vs. bronze Steel idler gear Vs. powdered metal arbon idler bushing Vs. none Tutrided cast iron cover Vs. cast iron cover Induction hardened steel rotor Vs. steel rotor 4 G eramic bracket bushing Vs. bronze Steel idler gear Vs. powdered metal arbon idler bushing Vs. bronze Tutrided cast iron cover Vs. cast iron cover Induction hardened steel rotor Vs. steel rotor 44 4G Same as above 4 G Same as above 46 6G Same as above Options: V is available on both pumps. ote: The Tuthill reversing feature is not available on 4000 pumps. 40 Pumps B Pump 40 Series Additional Features 4 B arbon bracket bushing Vs. bronze Steel idler gear Vs. powdered metal arbon Idler bushing Vs. none 4 B arbon bracket bushing Vs. bronze Steel idler gear Vs. powdered metal arbon Idler bushing Vs. bronze 44 4B Same as above 4 B Same as above 46 6B Same as above Options: V678 and mounting feet 8, 8 & 8 are available on both pumps. ote: The Tuthill reversing feature is not available on 4000 pumps. v.0 (0.6.) Page of 7 www.tuthillpump.com
4000/ ross Reference List 40 Pumps B Pump 40 Series Additional Features 4 B eramic bracket bushing Vs. bronze Steel idler gear Vs. powdered metal arbon idler bushing Vs. none Tutrided cast iron cover Vs. cast iron cover Induction hardened steel rotor Vs. steel rotor 4 B eramic bracket bushing Vs. bronze Steel idler gear Vs. powdered metal arbon idler bushing Vs. bronze Tutrided cast iron cover Vs. cast iron cover Induction hardened steel rotor Vs. steel rotor 44 4B Same as above 4 B Same as above 46 6B Same as above Options: V678 and mounting feet 8, 8 & 8 are available on both pumps. ote: The Tuthill reversing feature is not available on 4000 pumps. 40 and 40 pumps have the same assembled dimensions as their G pump counterparts. 40 pumps have the same assembled dimensions as their B pump counterparts. v.0 (0.6.) Page of 7 www.tuthillpump.com
446 Pump Mounting Dimensions P T PIPE TAP Z L O X ØU ØB B.. ØS D WOODRUFF KEYWAY K E E H M F G OVERALL LEGTH WITH RELIEF VALVE FEATURE L BL BO B WOODRUFF KEYWAY K BALL BEARIG FEATURE WITH PRESSURE RELIEF VALVE FEATURE Model B G D E F H K L M O 4 7/8 7 9/6 8 / /4 9/ / #406 6 /6 9/ 7/ /6 4 /8 8 7/ 9 7/ 7/8 / SLOT / #606 6 /6 SLOT / 7/6 44 /8 9 7/ 0 7/ 7/8 / SLOT / #606 6 9/ SLOT / 7/6 4 6 /8 /6 /8 4 /4 / SLOT / #808 8 /8 SLOT / 6 /4 46 6 /8 /8 /8 4 /4 / SLOT / #808 8 7/8 SLOT / 6 /4 Model P S T U X Z BL B BO 4 7/ /4 PT /8 /6 /8 6 /6 7/ /6 4 6 /8 /4 /4" PT /4 4 7/8 4 /8 6 /6 / 7/6 44 6 / /4 /" PT /4 4 /8 /4 6 9/ / 7/6 4 7 / /4 /" PT 4 /4 8 /8 9/6 6 /4 46 8 /8 /4 PT 4 /4 4 /4 8 7/8 9/6 6 /4 v.0 (0.6.) Page 4 of 7 www.tuthillpump.com
446 & 446 Pump Mounting Dimensions T PIPE TAP P Z L X ØU D WOODRUFF KEYWAY K H E E M F G OVERALL LEGTH WITH RELIEF VALVE FEATURE WITH PRESSURE RELIEF VALVE FEATURE Model G D E F H K L M P 4 7 9/6 8 / /4 9/ / #606 6 /6 9/ /6 7/ 4 8 7/ 9 7/ 7/8 / SLOT / #606 6 /6 SLOT /6 6 /8 44 9 7/ 0 7/ 7/8 / SLOT / #606 6 9/ SLOT /6 6 / 4 /6 /8 4 /4 /6 /8 / #808 8 /8 /6 / 7 / 46 /8 /8 4 /4 /6 /8 / #808 8 7/8 7/6 / 8 /8 Model T U X Z 4 PT /8 /6 /8 4 /4" PT /4 4 7/8 4 /8 44 /" PT /4 4 /8 /4 4 /" PT 4 /4 46 PT 4 /4 4 /4 v.0 (0.6.) Page of 7 www.tuthillpump.com
446 Pump Mounting Dimensions P T PIPE TAP Z L O X ØU ØB B.. ØS D WOODRUFF KEYWAY K E E H M F G OVERALL LEGTH WITH RELIEF VALVE FEATURE WITH PRESSURE RELIEF VALVE FEATURE Model G D E F H K L M O P 4 7 9/6 8 / /4 9/ / #406 6 /6 9/ /6 /6 7/ 4 8 7/ 9 7/ 7/8 / SLOT / #606 6 /6 SLOT / 7/6 6 /8 44 9 7/ 0 7/ 7/8 / SLOT / #606 6 9/ SLOT / 7/6 6 / 4 /6 /8 4 /4 / SLOT / #808 8 /8 SLOT /6 6 /4 7 / 46 /8 /8 4 /4 / SLOT / #808 8 7/8 SLOT /6 6 /4 8 /8 Model S T U X Z 4 /4 PT /8 /6 /8 4 /4 /4" PT /4 4 7/8 4 /8 44 /4 /" PT /4 4 /8 /4 4 /4 /" PT 4 /4 46 /4 PT 4 /4 4 /4 v.0 (0.6.) Page 6 of 7 www.tuthillpump.com
400/400 Pump Model umber System Pump 4 4 SubGroup Standard Design Abrasion Resistant Design Size 4 6 Pump Options V Valve Outboard Ball Bearing U over Rotated 80 SAE Port Option* *See 400/400 Series Port Sizes below. Modifications eoprene Seal 6 PTFE Seal 7 Viton Seal 7890 Abrasion Resistant Seal 8 EPR Seal o Flat/Keyway in Shaft Rotation (Valved Models) lockwise Rotation ounterclockwise Rotation 400/400 Series Port Sizes Model umber Location Port Pump Size Stamped on a metal tag on the cover Style Size 4 6 PT BSPP BSPT SAE STD. /4" STD. /" STD. STD. STD. OPT. /4" OPT. /" OPT. OPT. OPT. /4" OPT. 4 OPT. 6 OPT. OPT. 0 OPT. OPT. 4 OPT. OPT. OPT. TUTHILL 44 v.0 (0.6.) Page 7 of 7 www.tuthillpump.com
eoprene eramic Bushings arbon Bushings Viton Ethylene Propylene (EPR) PTFE 600 F 400/400 Pump Temperature Limits 0 F 00 F 40 F 400 F 0 F 00 F 0 F 00 F 0 F 00 F 0 F 0 F 0 F 00 F otes:. A pump s performance is dependent on more than just the temperature ranges of the component materials. v.0 (0.6.) Page 8 of 7 www.tuthillpump.com
400/400 Pump Materials of onstruction Part ame Material Standard omments Availability Housing ast Iron ASTM A48 96a lasses 0,, or 40 Std. Bracket ast Iron ASTM A48 96a lasses 0,, or 40 Std. Bracket Bushing over Rotor arbon arbon Graphite Resin Std. eramic Alumina eramic, Diamonite Std. on 40 & 40 Models Opt. ast Iron ASTM A48 96a lasses 0,, or 40 Std. ast Iron ASTM A48 96a Heat Treated (Std. on 40 & 40 Models) Opt. Steel 7 or 4 Steel Forging Std. Steel 7 or 4 Heat Treated (Std. on 40 & 40 Models) Idler Steel 7 Std. Idler Pin Steel 7 Heat Treated Std. Opt. Idler Bushing arbon arbon Graphite Resin Std. Seal Gland ast Iron ASTM A48 96a lasses 0,, or 40 DU Bushing Only on 40 models Std. Adjustable Thrust Sleeve Steel AISI 08 Only on 40 Models Std. Packing Gland ORings ast Iron Bronze ASTM A48 96a SAE 660 Only on 40 & 40 models Buna Viton eoprene EPR PTFE Std. /A STD Opt. Opt. Opt. * Bronze idler bushing standard on 6 size pumps ( size available with steel idler gear). v.0 (0.6.) Page 9 of 7 www.tuthillpump.com
TO PUMP SUTIO TO PUMP SUTIO 09 Pump/EMA Motor Mounting Dimensions T L L A PORT O H ØD MTG. HOLES F X B E Y L T (4) ØP HOLES R S V ØU ØK ØJ M Motor Frame Size A B D E F H J K L M O 6 PT /64 8 /6 / 4 7/8 / 7/8 4 / / /64 /64 7/ 4T or /64 8 /6 / / 4 / 7/8 4 / / /64 /64 7/ 4T BSP /64 8 /6 / / / 7/8 4 / / /64 /64 7/ Motor Frame Size P R S T U V X Y 6 / 4 /6 /6 / /8 /64 /4 6 /6 4T / 4 /6 /6 / 7/8 /64 6 7/8 4T / 4 /6 /6 / 7/8 /64 6 7/8 v.0 (0.6.) Page 0 of 7 www.tuthillpump.com
TO PUMP SUTIO TO PUMP SUTIO 09 Pump/IE Motor Mounting Dimensions T L L A PORT O H ØD MTG. HOLES F X B E Y L T (4) ØP HOLES R S V ØU ØK ØJ M Motor Frame Size IE 7 A B D E F H J K L M O 6.8 9. 7 90 7 0 0 6. 7.8 7.7. IE 90 7.8. 0 40 IE 00 BSPT 4.8. 60 IE 4.8 4. 90 00 OR OR 40 4 OR 40 90 9 6. 7.8 7.7. 00 0 0 6. 7.8 7.7. 0 0 6. 7.8 7.7. Motor Frame Size P R S T U V X Y IE 7 0.. 94. 4 6 40 IE 90 0.. 8 94. 4 6 0 70 IE 00 0.. 8 94. 8 6 7 9 IE 0.. 8 94. 8 6 7 4 Dimensions shown are in millimeters. v.0 (0.6.) Page of 7 www.tuthillpump.com
TO PUMP SUTIO TO PUMP SUTIO 0, 00 & 00 Pump/EMA Motor Mounting Dimensions T L L A PORT O H ØD MTG. HOLES F X B E Y L T (4) ØP HOLES R S V ØU ØK ØJ M Motor Frame Size 6 A B D E F H J K L M /64 8 49/64 / 4 7/8 / 7/8 4 / /4 47/64 / 4T / PT 8 49/64 / / 4 / 7/8 4 / /4 47/64 / 4T or 8 49/64 / / / 7/8 4 / /4 47/64 / 8T* / BSP /64 9 49/64 / 7 / / 4 / 7/8 4 / /4 47/64 / 84T* /64 9 49/64 / 7 / / 4 / 7/8 4 / /4 47/64 / Motor Frame Size O P R S T U V X Y 6 /8 / 4 /8 /6 4/64 /8 /64 /4 6 /6 4T /8 / 7/64 /6 4/64 7/8 /64 6 7/8 4T /8 / 7/64 /6 4/64 7/8 /64 6 6 7/8 8T* /8 / 7/64 /6 4/64 7/8 /64 6 / 9 84T* /8 / 7/64 /6 4/64 7/8 /64 6 / 9 ote frame size when making motor selection. *Will require a special motor flange and a 7/8 shaft. v.0 (0.6.) Page of 7 www.tuthillpump.com
TO PUMP SUTIO TO PUMP SUTIO 0, 00 & 00 Pump/IE Motor Mounting Dimensions T L L A PORT O H ØD MTG. HOLES F X B E Y L T (4) ØP HOLES R S V ØU ØK ØJ M Motor Frame Size IE 7 A B D E F H J K L M 4.9 04.7 7 90 7 0 0 8.6 69.9 69 IE 80 9.9.7 0 00 80 00 80 8.6 69.9 69 IE 90 /.9.7 0 40 BSPT IE 00.9.7 60 IE 9.9 4.7 90 00 OR OR 40 4 OR 40 90 9 8.6 69.9 69 00 0 0 8.6 69.9 69 0 0 8.6 69.9 69 Motor Frame Size O P R S T U V X Y IE 7.88 0..7 94. 4 6 40 IE 80.88 7..7 6 94. 9 6 0 IE 90.88 0..7 8 94. 4 6 0 70 IE 00.88 0..7 8 94. 8 6 7 9 IE.88 0..7 8 94. 8 6 7 4 Dimensions shown are in millimeters. v.0 (0.6.) Page of 7 www.tuthillpump.com
Pump Model umber System Pump Series Material of onstruction I Iron Pump Size 009 0 00 00 Valve Type V Relief Valve R Return to Tank 0 o Valve Frame Size /8 (6) 7/8 (4/4T) See ote 4 See ote 4 IE 00 or, B4 6 IE 90, B4 7 IE 80, B4 8 IE 7, B Porting PT SAE BSP 4 Other Seal Elastomer Type, Buna Type, eoprene 7 Type, Viton 8 Type, EPR 9 Other Rotation lockwise ounterclockwise 00 o Valve Special Mod Assigned by Tuthill Pump Group Engineering as Required for special Pump modifications otes:.) All IE frames, except for IE 7, reference a B4 Face type mounting. The IE 7 frame mounting is a B flange type..) The 009 size is not available in an IE 80 frame size..) Suitable for IE 00/, B4 with 9mm shaft. 4.) Suitable for IE 00/, B4 with 4mm shaft. v.0 (0.6.) Page 4 of 7 www.tuthillpump.com
Buna eoprene Bronze Bushings arbon Bushings Viton Ethylene Propylene (EPR) PTFE 600 F Pump Temperature Limits 0 F 00 F 40 F 400 F 0 F 00 F 0 F 00 F 0 F 00 F 0 F 0 F 0 F 00 F otes: A pump s performance is dependent on more than just the temperature ranges of the component materials. v.0 (0.6.) Page of 7 www.tuthillpump.com
Pump Materials of onstruction Part ame Material Standard omments Availability Housing ast Iron ASTM A48 96a lasses 0,, or 40 Std. over ast Iron ASTM A48 96a lasses 0,, or 40 Std. Rotor Ductile Iron ASTM A6 Ductile Iron Grade 8006 Std. Idler Ductile Iron ASTM A6 Ductile Iron Grade 8006 Std. Idler Pin Steel 7 Heat Treated Std. Idler Bushing Relief Valve Body Relief Valve BlockOff Plate arbon arbon Graphite Resin Std. ast Iron ASTM A48 96a lasses 0,, or 40 Std. Steel ASTM A6 Std. Gaskets Standard Oriented Polyester Std. Standard Garlock Used for Relief Valve Pumps Only Std. v.0 (0.6.) Page 6 of 7 www.tuthillpump.com
Pump PSH Data PSH Required for Tuthill Series pumps 070 SSU PUMP SERIES SPEED RPM 00 600 900 00 00 800 009 FT..4.9. 4. 6.4 9. 0 FT.....0 7.0 9.8 00 FT..6..6. 7.7 0.4 00 FT..7.6 4. 6.6 9..8 otes: 4. For liquid viscosity up to 70 SSU.. PSHA (et Positive Suction Head Available) must be greater than the PSHR (et Positive Suction Head Required) value provided in the table. 6. Values above are for feet of liquid with a Specific Gravity of.0. Viscosity orrection Factor Viscosity (SSU) 000 00 000 00 orrection Factor..0..0 v.0 (0.6.) Page 7 of 7 www.tuthillpump.com